release openrc-0.9.8

This reverts commit f583030e3c.

The previous commit did not account for the case of not having iproute2
installed.

Reported-by: Duncan <1i5t5.duncan@cox.net>
X-Gentoo-Bug: 397875
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=397875

Makefile

@@ -1,15 +1,10 @@
 # OpenRC Makefile
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 include Makefile.inc
 
-SUBDIR=		conf.d etc init.d local.d man scripts sh src
-
-# Build our old net foo or not
-ifeq (${MKOLDNET},yes)
-SUBDIR+=	net doc
-endif
+SUBDIR=		conf.d doc etc init.d local.d man net scripts sh src
 
 # Build pkgconfig or not
 MKPKGCONFIG?=	yes

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.8.2
+VERSION=	0.9.8
 PKG=		${NAME}-${VERSION}

README

@@ -14,9 +14,9 @@ MKPAM=pam
 MKPKGCONFIG=no
 MKRCSYS=prefix
 MKSELINUX=yes
+MKSTATICLIBS=no
 MKTERMCAP=ncurses
 MKTERMCAP=termcap
-MKOLDNET=yes
 PKG_PREFIX=/usr/pkg
 LOCAL_PREFIX=/usr/local
 PREFIX=/usr/local
@@ -70,9 +70,11 @@ of the system.
 
 Reporting Bugs
 --------------
-Bugs should go to the Gentoo Bugzilla:
+Since Gentoo Linux is hosting OpenRC development, Bugs should go to
+the Gentoo Bugzilla:
 	http://bugs.gentoo.org/
-You'll want the "Gentoo Linux" product and the "baselayout" component.
+They should be filed under the "Gentoo Hosted Projects" product and
+the "openrc" component.
 
 
 History - by Roy Marples

README.newnet

@@ -1,40 +0,0 @@
-The following applies only to the newnet stack, which is not presently
-maintained in OpenRC. The oldnet stack is maintained instead.
-- Robin H. Johnson <robbat2@gentoo.org>, 2011/02/21
-
-OpenRC Network Ideals
----------------------
-
-The new style networking for OpenRC is very simplistic - provide a basic means
-of configuring static interface address and routes whilst allowing the
-possibility to run any command at any point.
-
-In a nutshell, init.d/network is a wrapper around ifconfig(8) and
-init.d/staticroute is wrapper around route(8).
-
-In the Perfect World (TM) ifconfig should be able to configure everything
-about the interface easily * . The BSD family almost get this right and Linux
-epically fails.
-
-* Only static configuration, including link setup.
-For dynamic, static, IPv4LL, arping and per ssid IPv4 setup dhcpcd-5.x
-provides your needs.
-
-It fails because there are many tools to do the same job and often have
-vastly different syntax where they could be similar. In other words, there
-is no coherence.
-
-OpenRC-0.4.x and older (inc Gentoo baselayout-1) had a collection of scripts
-for each tool and allowed a script per interface. Over the years, this design
-has proven very hard to maintain as each user has their own idea of how
-things should work. Also, there were (and still are) race conditions.
-
-So where do we go from here?
-Well, it's possible to use the new network scripts using the tools
-currently available. It's just harder as you have to know them and their
-documentation can be lacking at times.
-The correct end goal is a BSD style ifconfig tool.
-I've started work on it, but the project has stalled somewhat.
-It's display only right now and the source is not yet publicly available.
-If you have the skills and share the vision then contact me privately and
-we'll take it from there.

STYLE

@@ -32,3 +32,54 @@ void foo(int c)
 
 	return ret;
 }
+
+##################
+# COMMIT MESSAGES #
+##################
+
+The following is an example of a correctly formatted git commit message
+for this repository. Most of this information came from this blog post
+[1], so I would like to thank the author.
+
+### cut here ###
+Capitalized, short (50 chars or less) summary
+
+More detailed explanatory text, if necessary.  Wrap it to about 72
+characters or so.  In some contexts, the first line is treated as the
+subject of an email and the rest of the text as the body.  The blank
+line separating the summary from the body is critical (unless you omit
+the body entirely); tools like rebase can get confused if you run the
+two together.
+
+Write your commit message in the present tense: "Fix bug" and not "Fixed
+bug."  This convention matches up with commit messages generated by
+commands like git merge and git revert.
+
+Further paragraphs come after blank lines.
+
+- Bullet points are okay, too
+
+- Typically a hyphen or asterisk is used for the bullet, preceded by a
+  single space, with blank lines in between, but conventions vary here
+
+- Use a hanging indent
+
+Reported-by: User Name <email>
+X-[Distro]-Bug: BugID
+X-[Distro]-Bug-URL: URL for the bug (on the distribution's web site typically)
+### cut here ###
+
+If you did not write the code and the patch does not include authorship
+information in a format git can use, please use the --author option of the
+git commit command to make the authorship correct.
+
+The Reported-by tag is required if the person who reported the bug is
+different from the author and committer.
+
+  The X-[Distro]-Bug/Bug-URL tags are required if this commit is related
+  to a bug reported to us by a specific distribution   of linux or a
+  *BSD. Also, [Distro] should be replaced with the name of the
+  distribution, e.g. X-Gentoo-Bug.
+
+[1] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html
+

conf.d/Makefile

@@ -1,19 +1,23 @@
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount network staticroute urandom
+CONF=	bootmisc fsck hostname localmount network staticroute urandom \
+	${CONF-${OS}}
 
 TARGETS+=	network staticroute
 CLEANFILES+=	network staticroute
 
 MK=	../mk
 include ${MK}/os.mk
-include Makefile.${OS}
+
+CONF-FreeBSD=	ipfw moused powerd rarpd savecore syscons
+
+CONF-Linux=	consolefont dmesg hwclock keymaps killprocs modules
+
+CONF-NetBSD=	moused rarpd savecore
+
 include ${MK}/scripts.mk
 
-SOS?=	BSD
+network: network.in network${SFX}
+	cat $^ > $@
 
-network: network.in network.${SOS}
-	cp $@.in $@
-	[ -e $@.${SOS} ] && cat $@.${SOS} >> $@ || true
-
-staticroute: staticroute.${SOS}
-	cp $@.${SOS} $@
+staticroute: staticroute${SFX}
+	cp $@${SFX} $@

conf.d/Makefile.FreeBSD

@@ -1 +0,0 @@
-CONF+=	ipfw moused powerd rarpd savecore syscons

conf.d/Makefile.Linux

@@ -1,2 +0,0 @@
-CONF+=	consolefont dmesg hwclock keymaps modules
-SOS=	Linux

conf.d/Makefile.NetBSD

@@ -1 +0,0 @@
-CONF+=	moused rarpd savecore

conf.d/bootmisc

@@ -4,3 +4,7 @@ clean_tmp_dirs="/tmp"
 # Should we wipe the tmp paths completely or just selectively remove known
 # locks / files / etc... ?
 wipe_tmp="YES"
+
+# Write the initial dmesg log into /var/log/dmesg after boot
+# This may be useful if you need the kernel boot log afterwards
+log_dmesg="YES"

conf.d/consolefont

@@ -3,7 +3,7 @@
 # you shouldn't specify the trailing ".psf.gz", just the font name below.
 # To use the default console font, comment out the CONSOLEFONT setting below.
 # This setting is used by the /etc/init.d/consolefont script (NOTE: if you do
-# not want to use it, run "rc-update del consolefont" as root).
+# not want to use it, run "rc-update del consolefont boot" as root).
 consolefont="default8x16"
 
 # consoletranslation is the charset map file to use.  Leave commented to use

conf.d/fsck

@@ -13,6 +13,13 @@
 #fsck_passno=">1"
 #fsck_passno="<2"
 
+# If passno is not enough granularity, you can also specify mountpoints to
+# check. This should NOT be used for the default non-multiplexed fsck, or your
+# system might not be checked. Additionally, it is mutually exclusive with
+# the fsck_passno setting.
+#fsck_mnt=""
+#fsck_mnt="/home"
+
 # Most modern fs's don't require a full fsck on boot, but for those that do
 # it may be advisable to skip this when running on battery.
 # WARNING: Do not turn this off if you have any JFS partitions.

conf.d/killprocs

@@ -0,0 +1,3 @@
+# If you wish to pass any options to killall5 during shutdown,
+# you should do so here.
+killall5_opts=""

conf.d/modules

@@ -1,8 +1,10 @@
 # You can define a list modules for a specific kernel version,
 # a released kernel version, a main kernel version or just a list.
+# The most specific versioned variable will take precedence.
 #modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
 #modules_2_6_23="tun ieee1394"
 #modules_2_6="tun"
+#modules_2="ipv6"
 #modules="ohci1394"
 
 # You can give modules a different name when they load - the new name
@@ -10,10 +12,12 @@
 #modules="dummy:dummy1"
 
 # Give the modules some arguments if needed, per version if necessary.
+# Again, the most specific versioned variable will take precedence.
 #module_ieee1394_args="debug"
-#module_ieee1394_args_2_6_23_gentoo_r5="ieee1394 ohci1394"
-#module_ieee1394_args_2_6_23="tun ieee1394"
-#module_ieee1394_args_2_6="tun"
+#module_ieee1394_args_2_6_23_gentoo_r5="debug2"
+#module_ieee1394_args_2_6_23="debug3"
+#module_ieee1394_args_2_6="debug4"
+#module_ieee1394_args_2="debug5"
 
 # You should consult your kernel documentation and configuration
 # for a list of modules and their options.

conf.d/net

@@ -1,4 +1,4 @@
 # This blank configuration will automatically use DHCP for any net.*
 # scripts in /etc/init.d.  To create a more complete configuration,
-# please review /usr/share/doc/openrc/net.example and save your configuration
+# please review /usr/share/doc/openrc*/net.example* and save your configuration
 # in /etc/conf.d/net (this file :]!).

conf.d/urandom

@@ -2,4 +2,4 @@
 # (say for crypt swap), so you will need to customize this
 # behavior.  If you have /var on a separate partition, then
 # make sure this path lives on your root device somewhere.
-urandom_seed="/var/run/random-seed"
+urandom_seed="/var/lib/misc/random-seed"

doc/Makefile

@@ -1,7 +1,11 @@
 DIR=	${DOCDIR}/openrc
+SRCS=	net.example.in
 INC=	net.example
 
 MK=	../mk
 include ${MK}/os.mk
-include Makefile.${OS}
+
+%.example.in: %.example${SFX}
+	${CP} $< $@
+
 include ${MK}/scripts.mk

doc/Makefile.FreeBSD

@@ -1,5 +0,0 @@
-SRCS+=		net.example.in
-
-.SUFFIXES:	.BSD.in
-.BSD.in:
-	${CP} $< $@

doc/Makefile.Linux

@@ -1,5 +0,0 @@
-SRCS+=		net.example.in
-
-.SUFFIXES:	.Linux.in
-.Linux.in:
-	${CP} $< $@

doc/Makefile.NetBSD

@@ -1,5 +0,0 @@
-SRCS+=		net.example.in
-
-.SUFFIXES:	.BSD.in
-.BSD.in:
-	${CP} $< $@

doc/net.example.BSD.in

@@ -388,6 +388,17 @@
 #
 # ${IFACE} is set to the interface being brought up/down
 # ${IFVAR} is ${IFACE} converted to variable name bash allows
+#
+# For historical and compatibility reasons, preup is actually normally called
+# in the following sequence: up ; preup ; up.
+# The first up causes the kernel to initialize the device, so
+# that it is available for use in the preup function.  However, for some
+# hardware, e.g. CAN devices, some configuration is needed before trying to up
+# the interface will actually work. For such hardware, the
+# up_before_preup variables will allow skipping the first up call if set
+# to yes.
+#up_before_preup_IFVAR="NO"
+#up_before_preup="NO"
 
 #preup() {
 #	# Remember to return 0 on success

doc/net.example.Linux.in

@@ -350,7 +350,7 @@
 # By default we don't wait for wpa_supplicant to associate and authenticate.
 # If you need to change this behaviour then you don't know how our scripts work
 # and setting this value could cause strange things to happen.
-# If you would like to, so can specify how long in seconds.
+# If you would like it to wait, you can specify how long in seconds.
 #associate_timeout_eth0=60
 # A value of 0 means wait forever.
 
@@ -581,6 +581,18 @@
 # NOTE: depend functions only work in /etc/conf.d/net
 # and not in profile configs such as /etc/conf.d/net.foo
 
+# MAC-VLAN support
+# The following configuration can be used to create a new interface 'macvlan0'
+# linked to 'eth0'
+#macvlan_macvlan0="eth0"
+
+# MAC-VLAN mode (private, vepa, bridge, passtru)
+#mode_macvlan0="private"
+
+# IP address, MAC address, ... are configured as a normal interface
+#config_macvlan0="192.168.20.20/24"
+#mac_macvlan0="00:50:06:20:20:20"
+
 #-----------------------------------------------------------------------------
 # Bonding
 # For link bonding/trunking on 2.4 kernels, or kernels without sysfs
@@ -778,7 +790,7 @@
 
 #-----------------------------------------------------------------------------
 # TUN/TAP
-# For TUN/TAP support emerge net-misc/openvpn or sys-apps/usermode-utilities
+# For TUN/TAP support install iproute2, openvpn or usermode-utilities
 #
 # You must specify if we're a tun or tap device. Then you can give it any
 # name you like - such as vpn
@@ -789,6 +801,9 @@
 #tuntap_tap0="tap"
 #config_tap0="192.168.0.1/24"
 
+# Use something like this to pass custom options to iproute2 during
+# tunnel creation. This sets the user and group ownership of the node.
+#iproute2_tun1="user foo group bar"
 # For passing custom options to tunctl use something like the following.  This
 # example sets the owner to adm
 #tunctl_tun1="-u adm"
@@ -827,9 +842,9 @@
 
 # Below is an example of configuring the bridge
 # Consult "man brctl" for more details
-#brctl_br0="setfd 0
-#sethello 0
-#stp off"
+#brctl_br0="setfd 15
+#sethello 2
+#stp on"
 
 # You can also configure the bridge or bridge members via sysfs on 2.6 kernels
 # or newer. See the kernel bridge documentation for a description of these
@@ -917,6 +932,8 @@
 # /etc/iproute2/rt_tables, an example follows:
 # 2 oob
 # 3 external
+#
+# IPv6 RPDB entries are to be found in the rules6_IFVAR variables:
 
 #rules_eth0="
 #from ZZZ.ZZZ.200.128/27 table oob priority 500
@@ -931,6 +948,11 @@
 #XXX.XXX.112.0/24 dev eth1 table external scope link
 #default via XXX.XXX.112.1 dev eth1"
 
+# IPv6 example:
+#rules6_eth0="
+#from 2001:0DB8:AAAA:BBBB::/64 table vpn priority 100
+#to 2001:0DB8:AAAA:BBBB::/64 table vpn priority 150"
+
 
 #-----------------------------------------------------------------------------
 # System
@@ -1080,6 +1102,17 @@
 #
 # ${IFACE} is set to the interface being brought up/down
 # ${IFVAR} is ${IFACE} converted to variable name bash allows
+#
+# For historical and compatibility reasons, preup is actually normally called
+# in the following sequence: up ; preup ; up.
+# The first up causes the kernel to initialize the device, so
+# that it is available for use in the preup function.  However, for some
+# hardware, e.g. CAN devices, some configuration is needed before trying to up
+# the interface will actually work. For such hardware, the
+# up_before_preup variables will allow skipping the first up call if set
+# to yes.
+#up_before_preup_IFVAR="NO"
+#up_before_preup="NO"
 
 #preup() {
 #	# Test for link on the interface prior to bringing it up.  This

etc/Makefile

@@ -1,17 +1,33 @@
 DIR=	${SYSCONFDIR}
-CONF=	rc.conf
+SRCS=	rc.conf.in rc.in rc.shutdown.in
+BIN=	${BIN-${OS}}
+CONF=	rc.conf ${BIN-${OS}}
 
 CLEANFILES+=	rc.conf
 
 MK=	../mk
 include ${MK}/os.mk
-include Makefile.${OS}
+
+SED_EXTRA-FreeBSD=	-e 's:@TERM@:cons25:g'
+BIN-FreeBSD=		rc rc.shutdown rc.devd
+CONF-FreeBSD=		devd.conf
+
+SED_EXTRA-Linux=	-e 's:@TERM@:wsvt25:g'
+BIN-Linux=
+CONF-Linux=
+
+SED_EXTRA-NetBSD=	-e 's:@TERM@:wsvt25:g'
+BIN-NetBSD=		rc rc.shutdown
+CONF-NetBSD=
+
+SED_EXTRA=	${SED_EXTRA-${OS}}
+
 include ${MK}/scripts.mk
 
 # We can't use "ifndef" here because that treats set-but-empty
 # as not-set which is not what we want
 MKRCSYS ?= automagicplease
-ifeq ($(MKRCSYS),automagicplease)
+ifeq (${MKRCSYS},automagicplease)
 # If the user isn't picking a default, then have the
 # config go with runtime automagic detection #357247
 rc.conf: SED_EXTRA += -e '/^rc_sys=""/s:^:\#:'

etc/Makefile.FreeBSD

@@ -1,4 +0,0 @@
-SED_EXTRA=	-e 's:@TERM@:cons25:g'
-SRCS+=		rc.conf.in rc.in rc.shutdown.in
-CONF+=		devd.conf
-BIN+=		rc rc.shutdown rc.devd

etc/Makefile.Linux

@@ -1,2 +0,0 @@
-SED_EXTRA=	-e 's:@TERM@:wsvt25:g'
-SRCS+=		rc.conf.in rc.in rc.shutdown.in

etc/Makefile.NetBSD

@@ -1,3 +0,0 @@
-SED_EXTRA=	-e 's:@TERM@:wsvt25:g'
-SRCS+=		rc.conf.in rc.in rc.shutdown.in
-BIN+=		rc rc.shutdown

etc/rc.conf.Linux

@@ -21,4 +21,3 @@ rc_sys="@RC_SYS_DEFAULT@"
 # This is the number of tty's used in most of the rc-scripts (like
 # consolefont, numlock, etc ...)
 rc_tty_number=12
-

etc/rc.conf.in

@@ -1,18 +1,8 @@
 # Global OpenRC configuration settings
 
-# Set to "YES" if you want the rc system to try and start services
-# in parallel for a slight speed improvement. When running in parallel we
-# prefix the service output with its name as the output will get
-# jumbled up.
-# WARNING: whilst we have improved parallel, it can still potentially lock
-# the boot process. Don't file bugs about this unless you can supply
-# patches that fix it without breaking other things!
-#rc_parallel="NO"
-
 # Set rc_interactive to "YES" and you'll be able to press the I key during
 # boot so you can choose to start specific services. Set to "NO" to disable
-# this feature. This feature is automatically disabled if rc_parallel is
-# set to YES.
+# this feature.
 #rc_interactive="YES"
 
 # If we need to drop to a shell, you can specify it here.
@@ -47,6 +37,10 @@
 # logging can take place and as such cannot log the sysinit runlevel.
 #rc_logger="YES"
 
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+#rc_log_path="/var/log/rc.log"
+
 # By default we filter the environment for our running scripts. To allow other
 # variables through, add them here. Use a * to allow all variables through.
 #rc_env_allow="VAR1 VAR2"

etc/rc.devd

@@ -1,6 +1,6 @@
 #!/bin/sh
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # Inform RC that we are in the background and hotplugged
 export IN_BACKGROUND=yes

etc/rc.in

@@ -1,6 +1,6 @@
 #!@SHELL@
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)

etc/rc.shutdown.in

@@ -1,6 +1,6 @@
 #!@SHELL@
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # Handle interrupts
 trap : SIGINT SIGQUIT

init.d.misc/Makefile

@@ -7,5 +7,5 @@ MK=	../mk
 
 SED_EXTRA+= -e 's:@VARBASE@:/var:g'
 
+include ${MK}/os.mk
 include ${MK}/scripts.mk
-include Makefile.${OS}

init.d.misc/Makefile.FreeBSD

@@ -1 +0,0 @@
-PKG_PREFIX?=	/usr/local

init.d.misc/Makefile.Linux

@@ -1 +0,0 @@
-PKG_PREFIX?=/usr

init.d.misc/Makefile.NetBSD

@@ -1 +0,0 @@
-PKG_PREFIX?=	/usr/pkg

init.d.misc/avahi-dnsconfd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/avahi-dnsconfd
 command_args="$avahi_dnsconfd_args -D"

init.d.misc/avahid.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/avahi-daemon
 command_args="$avahid_args -D"

init.d.misc/dbus.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/bin/dbus-daemon
 pidfile=@VARBASE@/run/dbus/pid

init.d.misc/dhcpcd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/sbin/dhcpcd
 pidfile=/var/run/dhcpcd.pid

init.d.misc/dnsmasq.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/dnsmasq
 command_args=$dnsmasq_args

init.d.misc/hald.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/hald
 pidfile=@VARBASE@/run/hald/hald.pid

init.d.misc/named.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/named
 command_args=$named_args

init.d.misc/ntpd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 : ${ntpd_config:=/etc/ntp.conf}
 : ${ntpd_drift:=/var/db/ntpd.drift}

init.d.misc/openvpn.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 vpn=${RC_SVCNAME#*.}
 name="OpenVPN"

init.d.misc/polkitd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/polkitd
 pidfile=@VARBASE@/run/polkitd/polkitd.pid

init.d.misc/sshd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/sshd
 command_args=$sshd_args

init.d.misc/wpa_supplicant.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/wpa_supplicant
 : ${wpa_supplicant_conf:=/etc/wpa_supplicant.conf}

init.d/Makefile

@@ -1,25 +1,42 @@
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
 	network.in root.in savecache.in staticroute.in swap.in swclock.in \
-	sysctl.in urandom.in
+	sysctl.in urandom.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
-# Build our old net foo or not
-ifeq (${MKOLDNET},yes)
-_OLDNET=	net.lo
-endif
-_NET_LO=	${_OLDNET}
-
-INSTALLAFTER=	_installafter_${_NET_LO}
-CLEANFILES+=	${_NET_LO}
-TARGETS+=	${_NET_LO}
+INSTALLAFTER=	_installafter_net.lo
+CLEANFILES+=	net.lo
+TARGETS+=	net.lo
 
 MK=	../mk
 include ${MK}/os.mk
-include Makefile.${OS}
+
+NET_LO-FreeBSD=	net.lo0
+# Generic BSD scripts
+SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
+		rpcbind.in savecore.in syslogd.in
+# These are FreeBSD specific
+SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in ipfw.in mixer.in nscd.in \
+		powerd.in syscons.in
+
+NET_LO-Linux=	net.lo
+SRCS-Linux=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
+		killprocs.in modules.in mount-ro.in mtab.in numlock.in \
+		procfs.in sysfs.in termencoding.in
+
+NET_LO-NetBSD=	net.lo0
+# Generic BSD scripts
+SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
+		rpcbind.in savecore.in syslogd.in
+# These are NetBSD specific
+SRCS-NetBSD+=	devdb.in swap-blk.in ttys.in wscons.in
+
+%.in: %${SFX}
+	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@
+
 include ${MK}/scripts.mk
 
 _installafter_: realinstall
 
 _installafter_net.lo: realinstall
-	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO}
+	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO-${OS}}

init.d/Makefile.FreeBSD

@@ -1,13 +0,0 @@
-NET_LO=	net.lo0
-
-# Generic BSD scripts
-SRCS+=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-	rpcbind.in savecore.in syslogd.in
-
-# These are FreeBSD specific
-SRCS+=	adjkerntz.in devd.in dumpon.in ipfw.in mixer.in nscd.in \
-	powerd.in syscons.in
-
-.SUFFIXES:	.BSD.in
-.BSD.in:
-	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/Makefile.Linux

@@ -1,9 +0,0 @@
-NET_LO=	net.lo
-
-SRCS+=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in killprocs.in \
-	modules.in mount-ro.in mtab.in numlock.in procfs.in sysfs.in \
-	termencoding.in
-
-.SUFFIXES:	.Linux.in
-.Linux.in:
-	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/Makefile.NetBSD

@@ -1,12 +0,0 @@
-NET_LO=	net.lo0
-
-# Generic BSD scripts
-SRCS+=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-	rpcbind.in savecore.in syslogd.in
-
-# These are NetBSD specific
-SRCS+=	devdb.in swap-blk.in ttys.in wscons.in
-
-.SUFFIXES:	.BSD.in
-.BSD.in:
-	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/adjkerntz.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 extra_commands="save"
 

init.d/bootmisc.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 depend()
 {
@@ -10,12 +10,13 @@ depend()
 	keyword -prefix -timeout
 }
 
-dir_writeable()
+dir_writable()
 {
 	mkdir "$1"/.test.$$ 2>/dev/null && rmdir "$1"/.test.$$
 }
 
 : ${wipe_tmp:=${WIPE_TMP:-yes}}
+: ${log_dmesg:=${LOG_DMESG:-yes}}
 
 cleanup_tmp_dir()
 {
@@ -24,7 +25,7 @@ cleanup_tmp_dir()
 	if ! [ -d "$dir" ]; then
 		mkdir -p "$dir" || return $?
 	fi
-	dir_writeable "$dir" || return 1
+	dir_writable "$dir" || return 1
 	chmod a+rwt "$dir" 2> /dev/null
 	cd "$dir" || return 1
 	if yesno $wipe_tmp; then
@@ -71,6 +72,26 @@ mkutmp()
 	chmod 0664 "$1"
 }
 
+migrate_to_run()
+{
+	src="$1"
+	dst="$2"
+ 	if [ -L $src -a "$(readlink -f $src)" != $dst ]; then
+ 		ewarn "$src does not point to $dst."
+ 		ewarn "Setting $src to point to $dst."
+ 		rm $src
+ 	elif [ ! -L $src -a -d $src ]; then
+ 		ebegin "Migrating $src to $dst"
+ 		cp -a $src/* $dst/
+ 		rm -rf $src
+ 		eend $?
+ 	fi
+ 	# If $src doesn't exist at all, just run this
+ 	if [ ! -e $src ]; then
+ 		ln -s $dst $src
+ 	fi
+}
+
 start()
 {
 	# Remove any added console dirs
@@ -78,8 +99,16 @@ start()
 
 	local logw=false runw=false extra=
 	# Ensure that our basic dirs exist
-	[ "$RC_UNAME" = Linux ] && extra=/var/lib/misc # Satisfy Linux FHS
-	for x in /var/log /var/run /tmp $extra; do
+	if [ "$RC_UNAME" = Linux ]; then
+		# Satisfy Linux FHS
+		extra=/var/lib/misc
+		if [ ! -d /run ]; then
+			extra="/var/run $extra"
+		fi
+	else
+		extra=/var/run
+	fi
+	for x in /var/log /tmp $extra; do
 		if ! [ -d $x ]; then
 			if ! mkdir -p $x; then
 				eend 1 "failed to create needed directory $x"
@@ -88,7 +117,12 @@ start()
 		fi
 	done
 
-	if dir_writeable /var/run; then
+	if [ "$RC_UNAME" = Linux -a -d /run ] && false; then
+		migrate_to_run	/var/lock /run/lock
+		migrate_to_run	/var/run /run
+	fi
+
+	if dir_writable /var/run; then
 		ebegin "Creating user login records"
 		local xtra=
 		[ "$RC_UNAME" = NetBSD ] && xtra=x
@@ -130,7 +164,7 @@ start()
 		cleanup_tmp_dir "$tmp"
 	done
 
-	if dir_writeable /tmp; then
+	if dir_writable /tmp; then
 		# Make sure our X11 stuff have the correct permissions
 		# Omit the chown as bootmisc is run before network is up
 		# and users may be using lame LDAP auth #139411
@@ -142,11 +176,13 @@ start()
 		fi
 	fi
 
-	if $logw || dir_writeable /var/log; then
-		# Create an 'after-boot' dmesg log
-		if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ ]; then
-			dmesg > /var/log/dmesg
-			chmod 640 /var/log/dmesg
+	if yesno $log_dmesg; then
+		if $logw || dir_writable /var/log; then
+			# Create an 'after-boot' dmesg log
+			if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ ]; then
+				dmesg > /var/log/dmesg
+				chmod 640 /var/log/dmesg
+			fi
 		fi
 	fi
 

init.d/consolefont.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Sets a font for the consoles."
 
@@ -49,7 +49,7 @@ start()
 			retval=1
 			break
 		fi
-		x=$(($x + 1))
+		: $(( x += 1 ))
 	done
 	eend $retval
 

init.d/devd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/sbin/devd
 command_args=$devd_args

init.d/devdb.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Creates the dev database"
 
@@ -11,7 +11,7 @@ depend()
 
 start()
 {
-	ebegin "Bulding the dev database"
+	ebegin "Building the dev database"
 	if [ /var/run/dev.db -nt /dev ]; then
 		:
 	else

init.d/devfs.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Mount system critical filesystems in /dev."
 

init.d/dmesg.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Set the dmesg level for a cleaner boot"
 

init.d/dumpon.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Configures a specific kernel dump device."
 
@@ -19,7 +19,7 @@ start() {
 }
 
 stop() {
-	ebegin "Deactiving kernel core dump device"
+	ebegin "Deactivating kernel core dump device"
 	dumpon off
 	eend $?
 }

init.d/fsck.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Check and repair filesystems according to /etc/fstab"
 _IFS="
@@ -48,8 +48,13 @@ start()
 
 	if [ -n "$fsck_passno" ]; then
 		check_extra="[passno $fsck_passno] $check_extra"
+		if [ -n "$fsck_mnt" ]; then
+			eerror "Only 1 of fsck_passno and fsck_mnt must be set!"
+			return 1
+		fi
 	fi
 	ebegin "Checking local filesystems $check_extra"
+	# Append passno mounts
 	for p in $fsck_passno; do
 		local IFS="$_IFS"
 		case "$p" in
@@ -58,10 +63,16 @@ start()
 		set -- "$@" $(fstabinfo --passno "$p")
 		unset IFS
 	done
+	# Append custom mounts
+	for m in $fsck_mnt ; do
+		local IFS="$_IFS"
+		set -- "$@" "$m"
+		unset IFS
+	done
 
 	if [ "$RC_UNAME" = Linux ]; then
 		fsck_opts="$fsck_opts -C0 -T"
-		if [ -z "$fsck_passno" ]; then
+		if [ -z "$fsck_passno" -a -z "$fsck_mnt" ]; then
 			fsck_args=${fsck_args--A -p}
 			if echo 2>/dev/null >/.test.$$; then
 				rm -f /.test.$$
@@ -91,7 +102,7 @@ start()
 			_reboot
 		fi;;
 	8)	ewend 1 "Operational error"; return 0;;
-	12)	ewend 1 "fsck interupted";;
+	12)	ewend 1 "fsck interrupted";;
 	*)	eend 2 "Filesystems couldn't be fixed";;
 	esac
 	_abort || return 1

init.d/hostid.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 extra_commands="reset"
 : ${hostid_file:=/etc/hostid}

init.d/hostname.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Sets the hostname of the machine."
 

init.d/hwclock.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 extra_commands="save show"
 
@@ -85,7 +85,7 @@ start()
 
 	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
 		_hwclock --adjust $utc_cmd
-		retval=$(($retval + $?))
+		: $(( retval += $? ))
 	fi
 
 	# If setting UTC, don't bother to run hwclock when first booting
@@ -99,7 +99,7 @@ start()
 		else
 			_hwclock --systz $utc_cmd $clock_args
 		fi
-		retval=$(($retval + $?))
+		: $(( retval += $? ))
 	fi
 
 	eend $retval "Failed to set the system clock"

init.d/ipfw.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # This is based on /etc/rc.firewall and /etc/rc.firewall6 from FreeBSD
 
@@ -59,7 +59,7 @@ start() {
 		return 1
 	fi
 
-	# Use a statefull firewall
+	# Use a stateful firewall
 	ipfw add check-state
 	ipfw add pass tcp from me to any established
 
@@ -123,7 +123,7 @@ start() {
 	ipfw add deny udp from any to any 520 in
 
 	# Noise from webbrowsing.
-	# The statefull filter is a bit agressive, and will cause some
+	# The stateful filter is a bit aggressive, and will cause some
 	# connection teardowns to be logged.
 	ipfw add deny tcp from any 80,443 to any 1024-65535 in
 

init.d/keymaps.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Applies a keymap for the consoles."
 
@@ -47,7 +47,7 @@ start()
 	n=1
 	while [ $n -le $ttyn ]; do
 		kbd_mode $kmode -C $ttydev$n
-		n=$(($n + 1))
+		: $(( n += 1 ))
 	done
 	eend 0
 

init.d/killprocs.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Kill all processes so we can unmount disks cleanly."
 
@@ -12,11 +12,11 @@ depend()
 start()
 {
 	ebegin "Terminating remaining processes"
-	killall5 -15
+	killall5 -15 ${killall5_opts}
 	sleep 1
 	eend 0
 	ebegin "Killing remaining processes"
-	killall5 -9
+	killall5 -9 ${killall5_opts}
 	sleep 1
 	eend 0
 }

init.d/local.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Executes user programs in @SYSCONFDIR@/local.d"
 

init.d/localmount.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Mounts disks and swap according to /etc/fstab."
 
@@ -16,7 +16,7 @@ start()
 {
 	# Mount local filesystems in /etc/fstab.
 	local types="noproc" x= no_netdev=
-	for x in $net_fs_list; do
+	for x in $net_fs_list $extra_net_fs_list; do
 		types="${types},${x}"
 	done
 
@@ -34,19 +34,17 @@ start()
 stop()
 {
 	# We never unmount / or /dev or $RC_SVCDIR
-	local x= no_umounts_r="/|/dev|/dev/.*|${RC_SVCDIR}"
-	no_umounts_r="${no_umounts_r}|/bin|/sbin|/lib|/libexec"
+
+	# Bug 381783
+	local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
+
+	local x= no_umounts_r="/|/dev|/dev/.*|${rc_svcdir}"
+	no_umounts_r="${no_umounts_r}|/bin|/sbin|/lib(32|64)?|/libexec"
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
-	OIFS=$IFS SIFS=${IFS-y}
-	IFS=$IFS:
+	local IFS="$IFS:"
 	for x in $no_umounts $RC_NO_UMOUNTS; do
 		no_umounts_r="$no_umounts_r|$x"
 	done
-	if [ "$SIFS" = y ]; then
-		IFS=$OIFS
-	else
-		unset IFS
-	fi
 
 	if [ "$RC_UNAME" = Linux ]; then
 		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*"
@@ -70,12 +68,12 @@ stop()
 	einfo "Unmounting filesystems"
 	eindent
 	local fs=
-	for x in $net_fs_list; do
+	for x in $net_fs_list $extra_net_fs_list; do
 		fs="$fs${fs:+|}$x"
 	done
 	[ -n "$fs" ] && fs="^($fs)$"
 	do_unmount umount --skip-point-regex "$no_umounts_r" \
-		${fs:+--skip-fstype-regex} $fs --nonetdev
+		"${fs:+--skip-fstype-regex}" $fs --nonetdev
 	eoutdent
 
 	return 0

init.d/mixer.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 extra_commands="restore"
 
@@ -21,7 +21,7 @@ restore()
 			mixer -f "$mixer" \
 			$(cat "/var/db/${mixer#/dev/}-state") >/dev/null
 			veend $?
-			: $((retval += $?))
+			: $(( retval += $? ))
 		fi
 	done
 }
@@ -40,7 +40,7 @@ stop()
 		vebegin "$mixer"
 		mixer -f "$mixer" -s >/var/db/"${mixer#/dev/}"-state
 		veend $?
-		: $((retval += $?))
+		: $(( retval += $? ))
 	done
 	eoutdent
 	eend $retval

init.d/modules.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Loads a user defined list of kernel modules."
 
@@ -16,18 +16,21 @@ start()
 	# support compiled in ...
 	[ ! -f /proc/modules ] && return 0
 
-	local KV=$(uname -r)
-	local KV_MAJOR=${KV%%.*}
-	local x=${KV#*.}
-	local KV_MINOR=${x%%.*}
-	x=${KV#*.*.}
-	local KV_MICRO=${x%%-*}
+	local KV x y kv_variant_list
+	KV=$(uname -r)
+	# full $KV
+	kv_variant_list="${KV}"
+	# remove any KV_EXTRA options to just get the full version
+	x=${KV%%-*}
+	# now slowly strip them
+	while [ -n "$x" ] && [ "$x" != "$y" ]; do
+		kv_variant_list="${kv_variant_list} $x"
+		y=$x
+		x=${x%.*}
+	done
 
 	local list= x= xx= y= args= mpargs= cnt=0 a=
-	for x in "$KV" \
-		$KV_MAJOR.$KV_MINOR.$KV_MICRO \
-		$KV_MAJOR.$KV_MINOR \
-	; do
+	for x in $kv_variant_list ; do
 		eval list=\$modules_$(shell_var "$x")
 		[ -n "$list" ] && break
 	done
@@ -45,10 +48,7 @@ start()
 		fi
 		aa=$(shell_var "$a")
 		xx=$(shell_var "$x")
-		for y in "$KV" \
-			$KV_MAJOR.$KV_MINOR.$KV_MICRO \
-			$KV_MAJOR.$KV_MINOR \
-		; do
+		for y in $kv_variant_list ; do
 			eval args=\$module_${aa}_args_$(shell_var "$y")
 			[ -n "${args}" ] && break
 			eval args=\$module_${xx}_args_$(shell_var "$y")
@@ -57,7 +57,7 @@ start()
 		[ -z "$args" ] && eval args=\$module_${aa}_args
 		[ -z "$args" ] && eval args=\$module_${xx}_args
 		eval modprobe -q "$mpargs" "$x" "$args"
-		eend $? "Failed to load $x" && cnt=$(($cnt + 1))
+		eend $? "Failed to load $x" && : $(( cnt += 1 ))
 	done
 	einfo "Autoloaded $cnt module(s)"
 }

init.d/mount-ro.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Re-mount filesytems read-only for a clean reboot."
 
@@ -19,28 +19,26 @@ start()
 	# We need the do_unmount function
 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 	eindent
-	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|${RC_SVCDIR}" x= fs=
-	m="$m|/bin|/sbin|/lib|/libexec"
+
+	# Bug 381783
+	local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
+
+	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|${rc_svcdir}" x= fs=
+	m="$m|/bin|/sbin|/lib(32|64)?|/libexec"
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
-	local OIFS=$IFS SIFS=${IFS-y} IFS=$IFS
-	IFS=$IFS:
+	local IFS="$IFS:"
 	for x in $no_umounts $RC_NO_UMOUNTS; do
 		m="$m|$x"
 	done
-	if [ "$SIFS" = y ]; then
-		IFS=$OIFS
-	else
-		unset IFS
-	fi
 	m="^($m)$"
 	fs=
-	for x in $net_fs_list; do
+	for x in $net_fs_list $extra_net_fs_list; do
 		fs="$fs${fs:+|}$x"
 	done
 	[ -n "$fs" ] && fs="^($fs)$"
 	do_unmount "umount -r" \
 		--skip-point-regex "$m" \
-		${fs:+--skip-fstype-regex} $fs --nonetdev
+		"${fs:+--skip-fstype-regex}" $fs --nonetdev
 	eoutdent
 	eend $?
 }

init.d/moused.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 mouse=${RC_SVCNAME##*.}
 if [ -n "$mouse" -a "$mouse" != "moused" ]; then
@@ -54,7 +54,7 @@ start()
 		local ttyv=
 		for ttyv in /dev/ttyv*; do
 			vidcontrol < "$ttyv" -m on
-			: $((retval+= $?))
+			: $(( retval += $? ))
 		done
 	fi
 

init.d/mtab.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Update /etc/mtab to match what the kernel knows about"
 
@@ -12,9 +12,9 @@ depend()
 
 start()
 {
-	# /etc/mtab could be a symlink to /proc/mounts
-	if [ ! -w /etc/mtab -a -L /etc/mtab ]; then
-		eeinfo "Skipping mtab update (non writeable symlink)"
+	if [ -L /etc/mtab ]
+	then
+		einfo "Skipping mtab update (mtab is a symbolic link)"
 		return 0
 	fi
 

init.d/net.lo.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 MODULESDIR="${RC_LIBEXECDIR}/net"
 MODULESLIST="${RC_SVCDIR}/nettree"
@@ -21,11 +21,11 @@ depend()
 	need localmount
 	after bootmisc
 	provide net
-	keyword -jail -prefix -vserver
+	keyword -shutdown -jail -prefix -vserver
 
 	case "${IFACE}" in
 		lo|lo0);;
-		*) after net.lo net.lo0;;
+		*) after net.lo net.lo0 dbus;;
 	esac
 
 	if [ "$(command -v "depend_${IFVAR}")" = "depend_${IFVAR}" ]; then
@@ -42,12 +42,25 @@ depend()
 }
 
 # Support bash arrays - sigh
+_array_helper()
+{
+	local _a=
+
+	eval _a=\$$1
+	_a=$(echo "${_a}" | sed -e 's:^[[:space:]]*::' -e 's:[[:space:]]*$::' -e '/^$/d' -e 's:[[:space:]]\{1,\}: :g')
+
+	[ -n "${_a}" ] && printf "%s\n" "${_a}"
+}
+
 _get_array()
 {
 	local _a=
 	if [ -n "${BASH}" ]; then
 		case "$(declare -p "$1" 2>/dev/null)" in
 			"declare -a "*)
+				ewarn "You are using a bash array for $1."
+				ewarn "This feature will be removed in the future."
+				ewarn "Please see net.example for the correct format for $1."
 				eval "set -- \"\${$1[@]}\""
 				for _a; do
 					printf "%s\n" "${_a}"
@@ -57,10 +70,7 @@ _get_array()
 		esac
 	fi
 
-	eval _a=\$$1
-	printf "%s" "${_a}"
-	printf "\n"
-	[ -n "${_a}" ]
+	_array_helper $1
 }
 
 # Flatten bash arrays to simple strings
@@ -69,6 +79,9 @@ _flatten_array()
 	if [ -n "${BASH}" ]; then
 		case "$(declare -p "$1" 2>/dev/null)" in
 			"declare -a "*)
+				ewarn "You are using a bash array for $1."
+				ewarn "This feature will be removed in the future."
+				ewarn "Please see net.example for the correct format for $1."
 				eval "set -- \"\${$1[@]}\""
 				for x; do
 					printf "'%s' " "$(printf "$x" | sed "s:':'\\\'':g")"
@@ -78,10 +91,7 @@ _flatten_array()
 		esac
 	fi
 
-	eval _a=\$$1
-	printf "%s" "${_a}"
-	printf "\n"
-	[ -n "${_a}" ]
+	_array_helper $1
 }
 
 _wait_for_carrier()
@@ -105,7 +115,7 @@ _wait_for_carrier()
 			eend 0
 			return 0
 		fi
-		timeout=$((${timeout} - 1))
+		: $(( timeout -= 1 ))
 		[ "${efunc}" = "einfon" ] && printf "."
 	done
 
@@ -134,9 +144,9 @@ _netmask2cidr()
 	local i= len=
 	local IFS=.
 	for i in $1; do
-		while [ ${i} != "0" ]; do
-			len=$((${len} + ${i} % 2))
-			i=$((${i} >> 1))
+		while [ ${i} -ne 0 ]; do
+			: $(( len += i % 2 ))
+			: $(( i >>= 1 ))
 		done
 	done
 
@@ -267,7 +277,7 @@ _gen_module_list()
 		echo "module_${i}_program_start='${PROGRAM_START}'" >> "${MODULESLIST}"
 		echo "module_${i}_program_stop='${PROGRAM_STOP}'" >> "${MODULESLIST}"
 		echo "module_${i}_provide='${PROVIDE}'" >> "${MODULESLIST}"
-		i=$((${i} + 1))
+		: $(( i += 1 ))
 	done
 	echo "module_${i}=" >> "${MODULESLIST}"
 	)
@@ -294,7 +304,7 @@ _load_modules()
 
 	local i=-1 x= mod= f= provides=
 	while true; do
-		i=$((${i} + 1))
+		: $(( i += 1 ))
 		eval mod=\$module_${i}
 		[ -z "${mod}" ] && break
 		[ -e "${MODULESDIR}/${mod}.sh" ] || continue
@@ -428,7 +438,7 @@ _load_config()
 	# so modules can influence it
 	for cmd; do
 		eval config_${config_index}="'${cmd}'"
-		config_index=$((${config_index} + 1))
+		: $(( config_index += 1 ))
 	done
 	# Terminate the list
 	eval config_${config_index}=
@@ -436,7 +446,7 @@ _load_config()
 	config_index=0
 	for cmd in ${fallback}; do
 		eval fallback_${config_index}="'${cmd}'"
-		config_index=$((${config_index} + 1))
+		: $(( config_index += 1 ))
 	done
 	# Terminate the list
 	eval fallback_${config_index}=
@@ -478,7 +488,9 @@ start()
 {
 	local IFACE=${RC_SVCNAME#*.} oneworked=false fallback=false module=
 	local IFVAR=$(shell_var "${IFACE}") cmd= our_metric=
-	local metric=0
+	local metric=0 _up_before_preup
+	eval _up_before_preup="\$up_before_preup_${IFVAR}"
+	[ -z "${_up_before_preup}" ] && _up_before_preup=$up_before_preup
 
 	einfo "Bringing up interface ${IFACE}"
 	eindent
@@ -492,7 +504,7 @@ start()
 	# available in preup and afterwards incase the user inadvertently
 	# brings it down
 	if [ "$(command -v preup)" = "preup" ]; then
-		_up 2>/dev/null
+		yesno "${_up_before_preup:-yes}" && _up 2>/dev/null
 		ebegin "Running preup"
 		eindent
 		preup || return 1
@@ -531,7 +543,7 @@ start()
 	if [ -n "${our_metric}" ]; then
 		metric=${our_metric}
 	elif [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
-		metric=$((${metric} + $(_ifindex)))
+		: $(( metric += $(_ifindex) ))
 	fi
 
 	while true; do
@@ -539,7 +551,9 @@ start()
 		[ -z "${config}" ] && break
 
 		set -- ${config}
-		ebegin "$1"
+		if [ "$1" != "null" -a "$1" != "noop" ]; then
+			ebegin "$1"
+		fi
 		eindent
 		case "$1" in
 			noop)
@@ -569,11 +583,11 @@ start()
 				eindent
 				eval config_${config_index}=\$config
 				unset fallback_${config_index}
-				config_index=$((${config_index} - 1))
+				: $(( config_index -= 1 ))
 			fi
 		fi
 		eoutdent
-		config_index=$((${config_index} + 1))
+		: $(( config_index += 1 ))
 	done
 
 	if ! ${oneworked}; then

init.d/netmount.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Mounts network shares according to /etc/fstab."
 
@@ -44,7 +44,7 @@ start()
 	[ -x @SYSCONFDIR@/init.d/rpcbind ] && pmap="rpcbind"
 
 	local x= fs= rc=
-	for x in $net_fs_list; do
+	for x in $net_fs_list $extra_net_fs_list; do
 		case "$x" in
 			nfs|nfs4)
 			# If the nfsmount script took care of the nfs
@@ -81,7 +81,7 @@ stop()
 	ebegin "Unmounting network filesystems"
 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 
-	for x in $net_fs_list; do
+	for x in $net_fs_list $extra_net_fs_list; do
 		fs="$fs${fs:+,}$x"
 	done
 	if [ -n "$fs" ]; then
@@ -90,7 +90,7 @@ stop()
 
 	eindent
 	fs=
-	for x in $net_fs_list; do
+	for x in $net_fs_list $extra_net_fs_list; do
 		fs="$fs${fs:+|}$x"
 	done
 	[ -n "$fs" ] && fs="^($fs)$"

init.d/network.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # This script was inspired by the equivalent rc.d network from NetBSD.
 
@@ -219,6 +219,12 @@ start()
 		eend $?
 	fi
 
+	ewarn
+	ewarn "The $RC_SVCNAME script is deprecated and will be"
+	ewarn "removed in the future."
+	ewarn "Please use the net.* scripts to manage your network interfaces."
+	ewarn
+
 	einfo "Starting network"
 	routeflush
 	if [ "$RC_UNAME" = "Linux" ]; then
@@ -281,7 +287,7 @@ start()
 		tentative || break
 		[ $r = 5 ] && vebegin "Waiting for tentative addresses"
 		sleep 1
-		r=$(($r - 1))
+		: $(( r -= 1 ))
 	done
 	if [ $r != 5 ]; then
 		[ $r != 0 ]

init.d/newsyslog.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 required_files="/etc/newsyslog.conf"
 

init.d/nscd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/nscd
 command_args=$nscd_args

init.d/numlock.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Turns numlock on for the consoles."
 
@@ -21,7 +21,7 @@ _setleds()
 
 	while [ $i -le $ttyn ]; do
 		setleds -D "$1"num < $dev$i || retval=1
-		i=$(($i + 1))
+		: $(( i += 1 ))
 	done
 
 	return $retval

init.d/pf.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 name="Packet Filter"
 : ${pf_conf:=${pf_rules:-/etc/pf.conf}}

init.d/powerd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/powerd
 command_args=$powerd_args

init.d/procfs.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Mounts misc filesystems in /proc."
 
@@ -37,24 +37,24 @@ start()
 		fi
 	fi
 
-	# Setup Kernel Support for the NFS daemon status
-	if [ -d /proc/fs/nfsd ] && ! mountinfo -q /proc/fs/nfsd; then
-		if grep -qs nfsd /proc/filesystems; then
-			ebegin "Mounting NFS filesystem"
-			mount -t nfsd -o nodev,noexec,nosuid \
-				nfsd /proc/fs/nfsd
-			eend $?
-		fi
-	fi
-
 	# Setup Kernel Support for miscellaneous Binary Formats
-	if [ -d /proc/sys/fs/binfmt_misc ] \
-		&& ! mountinfo -q /proc/sys/fs/binfmt_misc; then
+	if [ -d /proc/sys/fs/binfmt_misc -a ! -e /proc/sys/fs/binfmt_misc/register ]; then
 		if grep -qs binfmt_misc /proc/filesystems; then
 			ebegin "Mounting misc binary format filesystem"
 			mount -t binfmt_misc -o nodev,noexec,nosuid \
 				binfmt_misc /proc/sys/fs/binfmt_misc
-			eend $?
+			if eend $? ; then
+				local fmts
+				ebegin "Loading custom binary format handlers"
+				fmts=$(grep -hsv -e '^[#;]' -e '^[[:space:]]*$' \
+					/run/binfmt.d/*.conf \
+					"/etc"/binfmt.d/*.conf \
+					""/usr/lib/binfmt.d/*.conf)
+				if [ -n "${fmts}" ]; then
+					echo "${fmts}" > /proc/sys/fs/binfmt_misc/register
+				fi
+				eend $?
+			fi
 		fi
 	fi
 

init.d/rarpd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/rarpd
 command_args="-f $rarpd_args"

init.d/rc-enabled.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 depend()
 {
@@ -33,7 +33,7 @@ start()
 
 		# Good to go!
 		"$svc" start && started="$started $svc"
-		: $((retval += $?))
+		: $(( retval += $? ))
 	done
 	service_set_value started "$started"
 	eend $retval "Some local rc services failed to start"
@@ -46,7 +46,7 @@ stop()
 	local svc= retval=0
 	for svc in $(rcorder $(service_get_value started) 2>/dev/null | sort -r); do
 		"$svc" stop
-		: $((retval += $?))
+		: $(( retval += $? ))
 	done
 	eend $retval "Some local rc services failed to stop"
 	return 0

init.d/root.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Mount the root fs read/write"
 

init.d/rpcbind.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/rpcbind
 command_args=$rpcbind_args

init.d/savecache.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Saves the caches OpenRC uses to non volatile storage"
 

init.d/savecore.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Saves a kernel dump."
 

init.d/staticroute.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # This script was inspired by the equivalent rc.d staticroute from NetBSD.
 
@@ -93,6 +93,11 @@ do_routes()
 
 start()
 {
+	ewarn
+	ewarn "The $RC_SVCNAME script is deprecated and will be"
+	ewarn "removed in the future."
+	ewarn "Please use the net.* scripts to manage your network interfaces."
+	ewarn
 	do_routes "Adding" "add"
 }
 

init.d/swap-blk.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 depend()
 {

init.d/swap.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 depend()
 {

init.d/swclock.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Sets the local clock to the mtime of a given file."
 
@@ -16,7 +16,9 @@ depend()
 start()
 {
 	ebegin "Setting the local clock based on last shutdown time"
-	swclock --warn
+	if ! swclock 2> /dev/null; then
+	swclock --warn @PREFIX@/sbin/runscript
+	fi
 	eend $?
 }
 

init.d/syscons.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 depend() {
 	need localmount

init.d/sysctl.BSD.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 depend()
 {

init.d/sysctl.Linux.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 depend()
 {
@@ -10,16 +10,25 @@ depend()
 
 start()
 {
-	local conf= retval=0
+	local conf= retval=0 err errs
+
 	ebegin "Configuring kernel parameters"
 	eindent
+
 	for conf in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
 		if [ -r "$conf" ]; then
 			vebegin "applying $conf"
-			sysctl -p "$conf" >/dev/null
+			if ! err=$(sysctl -q -p "$conf" 2>&1) ; then
+				errs="${errs} ${err}"
+				sysctl -q -e -p "${conf}"
+			fi
 			veend $? || retval=1
 		fi
 	done
+
 	eoutdent
-	eend $retval "Some errors were encountered"
+	if [ ${retval} -eq 0 ] && [ -n "${errs}" ] ; then
+		ewarn "Unknown keys:${errs}"
+	fi
+	eend $retval "Some errors were encountered: ${errs}"
 }

init.d/sysfs.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Mount the sys filesystem."
 
@@ -50,6 +50,43 @@ mount_misc()
 			eend $?
 		fi
 	fi
+
+	# Setup Kernel Support for configfs
+	if [ -d /sys/kernel/config ] && ! mountinfo -q /sys/kernel/config; then
+		if grep -qs configfs /proc/filesystems; then
+			ebegin "Mounting config filesystem"
+			mount -n -t configfs -o  nodev,noexec,nosuid \
+				configfs /sys/kernel/config
+			eend $?
+		fi
+	fi
+
+	# set up kernel support for cgroups
+	if [ -d /sys/fs/cgroup ] && ! mountinfo -q /sys/fs/cgroup; then
+		if grep -qs cgroup /proc/filesystems; then
+			ebegin "Mounting cgroup filesystem"
+			local opts="nodev,noexec,nosuid,mode=755,size=${rc_cgroupsize:-10m}"
+			mount -n -t tmpfs -o ${opts} cgroup_root /sys/fs/cgroup
+			eend $?
+		fi
+	fi
+}
+
+mount_cgroups()
+{
+	yesno ${rc_cgroups:-YES} || return 0
+	if [ ! -e /proc/cgroups ]; then
+		return 0
+	fi
+
+	while read name hier groups enabled rest; do
+		case "${enabled}" in
+			1)	mkdir /sys/fs/cgroup/${name}
+				mount -t cgroup -o nodev,noexec,nosuid,${name} \
+					${name} /sys/fs/cgroup/${name}
+				;;
+		esac
+	done < /proc/cgroups
 }
 
 start()
@@ -59,6 +96,11 @@ start()
 	retval=$?
 	if [ $retval -eq 0 ]; then
 		mount_misc
+		retval=$?
+	fi
+	if [ $retval -eq 0 ]; then
+		mount_cgroups
+		retval=$?
 	fi
 	return $retval
 }