release openrc-0.6.2

This fixes bug 327059, thanks to Jonathan for reporting this and for the patch.

.gitignore

@@ -1 +1 @@
-openrc-0.1.tar.bz2
+*.bz2

Makefile

@@ -1,12 +1,27 @@
 # OpenRC Makefile
-# Copyright 2007-2008 Roy Marples 
-# Distributed under the terms of the GNU General Public License v2
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
-NAME=		openrc
-VERSION=	0.1
-PKG=		${NAME}-${VERSION}
+include Makefile.inc
+
+SUBDIR=		conf.d etc init.d man scripts sh src
+
+# Build our old net foo or not
+_OLDNET_SH=	case "${MKOLDNET}" in \
+		[Yy][Ee][Ss]) echo "net doc";; \
+		*) echo "";; \
+		esac
+_OLDNET!=	${_OLDNET_SH}
+SUBDIR+=	${_OLDNET}$(shell ${_OLDNET_SH})
+
+# Build pkgconfig or not
+_PKGCONFIG_SH=	case "${MKPKGCONFIG}" in \
+		[Yy][Ee][Ss]|"") echo "pkgconfig";; \
+		*) echo "";; \
+		esac
+_PKGCONFIG!=	${_PKGCONFIG_SH}
+SUBDIR+=	${_PKGCONFIG}$(shell ${_PKGCONFIG_SH})
 
-SUBDIR=		conf.d doc etc init.d man net sh src
 # We need to ensure that runlevels is done last
 SUBDIR+=	runlevels
 
@@ -17,8 +32,9 @@ include ${MK}/sys.mk
 include ${MK}/os.mk
 include ${MK}/subdir.mk
 include ${MK}/dist.mk
-include ${MK}/gitignore.mk
+include ${MK}/git.mk
 
 _installafter:
-	${INSTALL} -d ${DESTDIR}/${PREFIX}/${RC_LIB}/init.d
-	${INSTALL} -d ${DESTDIR}/${PREFIX}/${RC_LIB}/tmp
+	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/init.d
+	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/tmp
+	${ECHO} "${VERSION}${GITVER}" > ${DESTDIR}/${LIBEXECDIR}/version

Makefile.inc

@@ -0,0 +1,3 @@
+NAME=		openrc
+VERSION=	0.6.2
+PKG=		${NAME}-${VERSION}

README

@@ -11,14 +11,18 @@ PROGLDFLAGS=-static
 LIBNAME=lib64
 DESTDIR=/tmp/openrc-image
 MKPAM=pam
+MKPKGCONFIG=no
 MKTERMCAP=ncurses
 MKTERMCAP=termcap
+MKOLDNET=yes
 PKG_PREFIX=/usr/pkg
 LOCAL_PREFIX=/usr/local
 PREFIX=/usr/local
 
 We don't support building a static OpenRC with PAM.
 You may need to use PROGLDFLAGS=-Wl,-Bstatic on glibc instead of just -static.
+If you debug memory under valgrind, add -DDEBUG_MEMORY to your CPPFLAGS
+so that all malloc memory should be freed at exit.
 
 You can also brand OpenRC if you so wish like so
 BRANDING=\"Gentoo/$(uname -s)\"
@@ -37,7 +41,7 @@ If any of the following files exist then we do not overwrite them
 rc and rc.shutdown are the hooks from the BSD init into OpenRC.
 devd.conf is modified from FreeBSD to call /etc/rc.devd which is a generic
 hook into OpenRC.
-inittab is the same, but for SysVInit as used by most Linux distrubtions.
+inittab is the same, but for SysVInit as used by most Linux distributions.
 This can be found in the support folder.
 Obviously, if you're installing this onto a system that does not use OpenRC
 by default then you may wish to backup the above listed files, remove them
@@ -54,14 +58,15 @@ If you installed OpenRC from your chosen distribution, you should report
 bugs directly to them. For example, if you use Gentoo and emerged OpenRC
 then you should reports bugs to http://bugs.gentoo.org.
 
-Otherwise, you can report them directly to me at http://bugs.marples.name
+Otherwise, you can report them directly to me at
+http://roy.marples.name/projects/openrc
 
 
 History - by Roy Marples
 ------------------------
 I became a Gentoo/Linux developer in 2004 and wrote the modular network
 scripts for the Gentoo baselayout package. baselayout is a collection of
-bash scripts to bring up your computer and it's services.
+bash scripts to bring up your computer and its services.
 Then towards the end of 2005 I found myself as the primary maintainer
 for baselayout.
 

README.net

@@ -0,0 +1,36 @@
+OpenRC Network Ideals
+---------------------
+
+The new style networking for OpenRC is very simplistic - provide a basic means
+of configuring static interface address and routes whilst allowing the
+possibility to run any command at any point.
+
+In a nutshell, init.d/network is a wrapper around ifconfig(8) and
+init.d/staticroute is wrapper around route(8).
+
+In the Perfect World (TM) ifconfig should be able to configure everything
+about the interface easily * . The BSD family almost get this right and Linux
+epically fails.
+
+* Only static configuration, including link setup.
+For dynamic, static, IPv4LL, arping and per ssid IPv4 setup dhcpcd-5.x
+provides your needs.
+
+It fails because there are many tools to do the same job and often have
+vastly different syntax where they could be similar. In other words, there
+is no coherence.
+
+OpenRC-0.4.x and older (inc Gentoo baselayout-1) had a collection of scripts
+for each tool and allowed a script per interface. Over the years, this design
+has proven very hard to maintain as each user has their own idea of how
+things should work. Also, there were (and still are) race conditions.
+
+So where do we go from here?
+Well, it's possible to use the new network scripts using the tools
+currently available. It's just harder as you have to know them and their
+documentation can be lacking at times.
+The correct end goal is a BSD style ifconfig tool.
+I've started work on it, but the project has stalled somewhat.
+It's display only right now and the source is not yet publicly available.
+If you have the skills and share the vision then contact me privately and
+we'll take it from there.

conf.d.BSD/Makefile

@@ -1,5 +0,0 @@
-DIR=	${CONFDIR}
-CONF=	localmount moused powerd rarpd
-
-MK=	../mk
-include ${MK}/scripts.mk

conf.d.FreeBSD/Makefile

@@ -1,5 +0,0 @@
-DIR=	${CONFDIR}
-CONF=	syscons
-
-MK=	../mk
-include ${MK}/scripts.mk

conf.d.Linux/Makefile

@@ -1,6 +0,0 @@
-DIR=		${CONFDIR}
-CONF=		consolefont keymaps modules
-CONF_APPEND=	clock
-
-MK=		../mk
-include ${MK}/scripts.mk

conf.d.Linux/clock

@@ -1,9 +0,0 @@
-
-# Set clock_adjtime if you wish hwclock to try and handle clock drift.
-# Don't set this if you run a ntp service or anything else that handles
-# clock drift.
-clock_adjtime="NO"
-
-# If you wish to pass any other arguments to hwclock during bootup,
-# you may do so here. Alpha users may wish to use --arc or --srm here.
-clock_args=""

conf.d.Linux/modules

@@ -1,12 +0,0 @@
-# You can define a list modules for a specific kernel version,
-# a released kernel version, a main kernel version or just a list.
-#modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
-#modules_2_6_23="tun ieee1394"
-#modules_2_6="tun"
-#modules="ohci1394"
-
-# Give the modules some arguments if needed.
-# module_ieee1394_args="debug"
-
-# You should consult your kernel documentation and configuration
-# for a list of modules and their options.

conf.d/.gitignore

@@ -0,0 +1,2 @@
+network
+staticroute

conf.d/Makefile

@@ -1,5 +1,19 @@
 DIR=	${CONFDIR}
-CONF=	bootmisc clock fsck hostname local net urandom
+CONF=	bootmisc fsck hostname local localmount network staticroute urandom
+
+TARGETS+=	network staticroute
+CLEANFILES+=	network staticroute
 
 MK=	../mk
+include ${MK}/os.mk
+include Makefile.${OS}
 include ${MK}/scripts.mk
+
+SOS?=	BSD
+
+network: network.in network.${SOS}
+	cp $@.in $@
+	[ -e $@.${SOS} ] && cat $@.${SOS} >> $@ || true
+
+staticroute: staticroute.${SOS}
+	cp $@.${SOS} $@

conf.d/Makefile.FreeBSD

@@ -0,0 +1 @@
+CONF+=	ipfw moused powerd rarpd savecore syscons

conf.d/Makefile.Linux

@@ -0,0 +1,2 @@
+CONF+=	consolefont dmesg hwclock keymaps modules
+SOS=	Linux

conf.d/Makefile.NetBSD

@@ -0,0 +1 @@
+CONF+=	moused rarpd savecore

conf.d/bootmisc

@@ -1,5 +1,5 @@
 # List of /tmp directories we should clean up
-wipe_tmp_dirs="/tmp"
+clean_tmp_dirs="/tmp"
 
 # Should we wipe the tmp paths completely or just selectively remove known
 # locks / files / etc... ?

conf.d/dmesg

@@ -0,0 +1,3 @@
+# Sets the level at which logging of messages is done to the
+# console.  See dmesg(8) for more info.
+dmesg_level="1"

conf.d/fsck

@@ -13,6 +13,11 @@
 #fsck_passno=">1"
 #fsck_passno="<2"
 
+# Most modern fs's don't require a full fsck on boot, but for those that do
+# it may be advisable to skip this when running on battery.
+# WARNING: Do not turn this off if you have any JFS partitions.
+fsck_on_battery="YES"
+
 # fsck_shutdown causes fsck to trigger during shutdown as well as startup.
 # The end result of this is that if any periodic non-root filesystem checks are
 # scheduled, under normal circumstances the actual check will happen during

conf.d/hwclock

@@ -0,0 +1,14 @@
+# Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
+# Greenwich Mean Time).  If that clock is set to the local time, then 
+# set CLOCK to "local".  Note that if you dual boot with Windows, then 
+# you should set it to "local".
+clock="UTC"
+
+# If you want to set the Hardware Clock to the current System Time 
+# (software clock) during shutdown, then say "YES" here.
+# You normally don't need to do this if you run a ntp daemon.
+clock_systohc="NO"
+
+# If you wish to pass any other arguments to hwclock during bootup,
+# you may do so here. Alpha users may wish to use --arc or --srm here.
+clock_args=""

conf.d/ipfw

@@ -0,0 +1,14 @@
+# ipfw provides a stateful firewall.
+# This means we allow everything out, and if we have a connection we allow it
+# back in. This is very flexable and quite secure.
+
+# For ease of use, we allow auth and ssh ports through as well.
+# To override the list of allowed ports
+#ipfw_ports_in="auth ssh"
+
+# You may want to enable logging of denied connections
+#ipfw_log_deny="YES"
+
+# This ports not logged
+#ipfw_ports_nolog="135-139,445 1026,1027 1433,1434"
+

conf.d/localmount

@@ -0,0 +1,3 @@
+# Stop the unmounting of certain points.
+# This could be useful for some NFS related work.
+#no_umounts="/dir1:/var/dir2"

conf.d/modules

@@ -0,0 +1,19 @@
+# You can define a list modules for a specific kernel version,
+# a released kernel version, a main kernel version or just a list.
+#modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
+#modules_2_6_23="tun ieee1394"
+#modules_2_6="tun"
+#modules="ohci1394"
+
+# You can give modules a different name when they load - the new name
+# will also be used to pick arguments below.
+#modules="dummy:dummy1"
+
+# Give the modules some arguments if needed, per version if necessary.
+#module_ieee1394_args="debug"
+#module_ieee1394_args_2_6_23_gentoo_r5="ieee1394 ohci1394"
+#module_ieee1394_args_2_6_23="tun ieee1394"
+#module_ieee1394_args_2_6="tun"
+
+# You should consult your kernel documentation and configuration
+# for a list of modules and their options.

conf.d/network.BSD

@@ -0,0 +1,4 @@
+
+# You can assign a default route
+#defaultroute="192.168.0.1"
+#defaultroute6="2001:a:b:c"

conf.d/network.Linux

@@ -0,0 +1,43 @@
+
+# You can assign a default route
+#defaultroute="gw 192.168.0.1"
+#defaultroute6="gw 2001:a:b:c"
+
+# ifconfig under Linux is not that powerful and doesn't easily handle
+# multiple addresses
+# On the other hand, ip (iproute2) is quite powerful and is also supported
+#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
+
+# You can also use ip to add the default route.
+#defaultiproute="via 192.168.0.1"
+#defaultiproute6="via 2001:a:b:c"
+
+# ip doesn't handle MTU like ifconfig, but we can do it like so
+#ifup_eth0="ip link set \$int mtu 1500"
+
+# Create a bonded interface
+#interfaces="bond0"
+#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
+#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
+#ifdown_bond0="rmmod bonding"
+
+# Create tap interface and a bridge interface.
+# We add the tap to the bridge.
+# An external program, like dhcpcd, will configure the IP on the bridge
+#interfaces="tun0 br0"
+#ifup_tun0="tunctl -t \$int"
+#ifdown_tun0="tunctl -d \$int"
+#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
+#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
+
+# Create VLAN
+#interfaces="eth0_2 eth0_3 eth0_4"
+#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
+#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
+#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
+#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
+#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
+
+# Normally you would use wpa_supplicant to configure wireless, but you can
+# use iwconfig also
+#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

conf.d/network.in

@@ -0,0 +1,28 @@
+# Assign static IP addresses and run custom scripts per interface.
+# Seperate commands with ;
+# Prefix with ! to run a shell script.
+# Use \$int to represent the interface
+#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
+
+# You also have ifup_eth0 and ifdown_eth0 to run other commands when
+# eth0 is started and stopped.
+# You should note that we don't stop the network at system shutdown by default.
+# If you really need this, then set shutdown_network=YES
+
+# Lastly, the interfaces variable pulls in virtual interfaces that cannot
+# be automatically detected.
+#interfaces="br0 bond0 vlan0"
+
+# You can also use files instead of variables here if you like:
+# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0
+# /etc/ip.eth0 is equivalent to ifconfig_eth0
+# /etc/ifup.eth0 is equivalent to ifup_eth0
+# /etc/ifdown.eth0 is equivalent to ifdown_eth0
+# Any files found will automatically be put into the interfaces variable.
+# You don't need to escape variables in files, so use $int instead of \$int.
+
+# If you require DHCP, you should install dhcpcd and it to the boot or
+# default runlevel.
+
+# NIS users can set the domain name here
+#domainname="foobar"

conf.d/savecore

@@ -1,29 +1,25 @@
-# Kernel core dump options for FreeBSD kernel.
-# Unless you're a FreeBSD kernel developer or driver writer then this won't
+# Unless you're a kernel developer or driver writer then this won't
 # be of any interest to you at all.
-
 # The following options allow to configure the kernel's core dump
-# facilities. Please read
-# http://www.freebsd.org/doc/en_US.ISO8859-1/books/developers-handbook/kerneldebug.html
-# for more information about Kernel core dumps and kernel debugging.
+# facilities.
 
-# KERNEL_DUMP_DEVICE variable is used to specify which device will be
+# The dump_device variable is used to specify which device will be
 # used by the kernel to write the dump down. This has to be a swap
 # partition, and has to be at least big enough to contain the whole
 # physical memory (see hw.physmem sysctl(8) variable).
 # When the variable is commented out, no core dump will be enabled for
 # the kernel.
-#KERNEL_DUMP_DEVICE="/dev/ad0s1b"
+#dump_device=/dev/ad0s1b
 
-# KERNEL_DUMP_DIR variable is used to tell savecore(8) utility where
+# The dump_dir variable is used to tell savecore(8) utility where
 # to save the kernel core dump once it's restored from the dump
 # device. If unset, /var/crash will be used, as the default of
 # FreeBSD.
-#KERNEL_DUMP_DIR="/var/crash"
+#dump_dir=/var/crash
 
-# KERNEL_DUMP_COMPRESS variable decide whether to compress with
+# The dump_compress variable decide whether to compress with
 # gzip(1) the dump or leave it of its original size (the size of the
 # physical memory present on the system). If set to yes, the -z option
 # will be passed to savecore(8) that will proceed on compressing the
 # dump.
-#KERNEL_DUMP_COMPRESS="NO"
+#dump_compress=NO

conf.d/staticroute.BSD

@@ -0,0 +1,6 @@
+# Separate multiple routes using ; or new lines.
+# /etc/route.conf(5) takes precedence over this configuration.
+
+# Example static routes. See route(8) for syntax.
+#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
+#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.Linux

@@ -0,0 +1,8 @@
+# Separate multiple routes using ; or new lines.
+
+# Example static routes. See route(8) for syntax.
+#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
+#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
+
+# Example static routes using iproute2. See ip(8) for syntax.
+#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"

doc.Linux/Makefile

@@ -1,5 +0,0 @@
-DIR=	${DOCDIR}/openrc
-INC=	net.example
-
-MK=	../mk
-include ${MK}/scripts.mk

doc/.gitignore

@@ -0,0 +1 @@
+net.example

doc/Makefile

@@ -2,4 +2,6 @@ DIR=	${DOCDIR}/openrc
 INC=	net.example
 
 MK=	../mk
+include ${MK}/os.mk
+include Makefile.${OS}
 include ${MK}/scripts.mk

doc/Makefile.FreeBSD

@@ -0,0 +1,5 @@
+SRCS+=		net.example.in
+
+.SUFFIXES:	.BSD.in
+.BSD.in:
+	${CP} $< $@

doc/Makefile.Linux

@@ -0,0 +1,5 @@
+SRCS+=		net.example.in
+
+.SUFFIXES:	.Linux.in
+.Linux.in:
+	${CP} $< $@

doc/Makefile.NetBSD

@@ -0,0 +1,5 @@
+SRCS+=		net.example.in
+
+.SUFFIXES:	.BSD.in
+.BSD.in:
+	${CP} $< $@

doc/net.example.BSD.in

@@ -12,7 +12,7 @@
 # kernel then remove the IPv6 address from your config.
 
 # If you want to use a static address or use DHCP explicitly, jump
-# down to the section labelled INTERFACE HANDLERS.
+# down to the section labeled INTERFACE HANDLERS.
 #
 # If you want to do anything more fancy, you should take the time to
 # read through the rest of this file.
@@ -22,10 +22,10 @@
 #
 # We now support modular networking scripts which means we can easily
 # add support for new interface types and modules while keeping
-# compatability with existing ones.
+# compatibility with existing ones.
 # 
 # Modules load by default if the package they need is installed.  If
-# you specify a module here that doesn't have it's package installed
+# you specify a module here that doesn't have its package installed
 # then you get an error stating which package you need to install.
 # Ideally, you only use the modules setting when you have two or more
 # packages installed that supply the same service.
@@ -43,11 +43,6 @@
 #       (eth0:1, eth0:2, etc)
 #       iproute2 does not do this as there is no need to
 #config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
-# Or you can use sequence expressions
-#config_eth0="192.168.0.{2..4}/24"  FIXME - may not work with baselayout2
-# which does the same as above. Be careful though as if you use this and
-# fallbacks, you have to ensure that both end up with the same number of
-# values otherwise your fallback won't work correctly.
 
 # You can also use IPv6 addresses
 # (you should always specify a prefix length with IPv6 here)
@@ -87,6 +82,10 @@
 # is how long we wait for carrier. The current default is 3 seconds
 #carrier_timeout_eth0=-1
 
+# You may wish to disable the interface being brought down when stopping.
+# This is only of use for WakeOnLan.
+#ifdown_eth0="NO"
+
 ##############################################################################
 # OPTIONAL MODULES
 
@@ -97,8 +96,8 @@
 #modules="iwconfig"
 
 # ifconfig (iwconig) support is a one shot script - wpa_supplicant is daemon
-# that scans, assoicates and re-configures if assocation is lost.
-# We call it iwconfig to seperate the wireless setup from ifconfig.
+# that scans, associates and re-configures if association is lost.
+# We call it iwconfig to separate the wireless setup from ifconfig.
 ####################################
 # HINTS
 #
@@ -183,7 +182,7 @@
 #dns_servers_001122334455="192.168.0.1 192.168.0.2"
 
 # Map a MAC address to an SSID
-# This is used when the Access Point is not broadcasting it's SSID
+# This is used when the Access Point is not broadcasting its SSID
 # WARNING: This will override the SSID being broadcast due to some
 # Access Points sending an SSID even when they have been configured
 # not to!
@@ -194,7 +193,7 @@
 # This lists the preferred SSIDs to connect to in order
 # SSID's can contain any characters here as they must match the broadcast
 # SSID exactly.
-# Surround each SSID with the " character and seperate them with a space
+# Surround each SSID with the " character and separate them with a space
 # If the first SSID isn't found then it moves onto the next
 # If this isn't defined then it connects to the first one found
 #preferred_aps="SSID1 SSID2"
@@ -209,9 +208,9 @@
 # any other available AP
 # "preferredonly" means it will only connect to visible APs in the preferred
 # list
-# "forcepreferred" means it will forceably connect to APs in order if it does
+# "forcepreferred" means it will forcibly connect to APs in order if it does
 # not find them in a scan
-# "forcepreferredonly" means it forceably connects to the APs in order and
+# "forcepreferredonly" means it forcibly connects to the APs in order and
 # does not bother to scan
 # "forceany" does the same as forcepreferred + connects to any other 
 # available AP
@@ -238,12 +237,12 @@
 
 ##################################################
 # wpa_supplicant
-# emerge net-wireless/wpa-supplicant
+# emerge net-wireless/wpa_supplicant
 # Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Console the wpa_supplicant.conf.example that is installed in
+# Consult the wpa_supplicant.conf.example that is installed in
 # /usr/share/doc/wpa_supplicant
 
-# By default we don't wait for wpa_suppliant to associate and authenticate.
+# By default we don't wait for wpa_supplicant to associate and authenticate.
 # If you would like to, so can specify how long in seconds
 #associate_timeout_eth0=60
 # A value of 0 means wait forever.
@@ -321,7 +320,7 @@
 # Set generic DHCP options like so
 #dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
 
-# This tells the dhcp client to release it's lease when it stops, not to
+# This tells the dhcp client to release its lease when it stops, not to
 # overwrite dns, ntp and nis settings, not to set a default route and not to
 # send the current hostname to the dhcp server and when it starts.
 # You can use any combination of the above options - the default is not to

doc/net.example.Linux.in

@@ -12,7 +12,7 @@
 # kernel then remove the IPv6 address from your config.
 
 # If you want to use a static address or use DHCP explicitly, jump
-# down to the section labelled INTERFACE HANDLERS.
+# down to the section labeled INTERFACE HANDLERS.
 #
 # If you want to do anything more fancy, you should take the time to
 # read through the rest of this file.
@@ -23,10 +23,10 @@
 #
 # We now support modular networking scripts which means we can easily
 # add support for new interface types and modules while keeping
-# compatability with existing ones.
+# compatibility with existing ones.
 # 
 # Modules load by default if the package they need is installed.  If
-# you specify a module here that doesn't have it's package installed
+# you specify a module here that doesn't have its package installed
 # then you get an error stating which package you need to install.
 # Ideally, you only use the modules setting when you have two or more
 # packages installed that supply the same service.
@@ -70,11 +70,6 @@
 #       iproute2 does not do this as there is no need to
 #config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
 # However, that only works with CIDR addresses, so you can't use netmask.
-# Or you can use sequence expressions
-#config_eth0="192.168.0.{2..4}/24"
-# which does the same as above. Be careful though as if you use this and
-# fallbacks, you have to ensure that both end up with the same number of
-# values otherwise your fallback won't work correctly.
 
 # You can also use IPv6 addresses
 # (you should always specify a prefix length with IPv6 here)
@@ -111,7 +106,7 @@
 
 # Each module described below can set a default base metric, lower is
 # preferred over higher. This is so we can prefer a wired route over a
-# wireless route automaticaly. You can override this by setting
+# wireless route automatically. You can override this by setting
 #metric_eth0="100"
 # or on a global basis
 #metric="100"
@@ -120,6 +115,10 @@
 # tables you may have to set a global metric as the due to a simple read of
 # the routing table taking over a minute at a time.
 
+# You may wish to disable the interface being brought down when stopping.
+# This is only of use for WakeOnLan.
+#ifdown_eth0="NO"
+
 ##############################################################################
 # OPTIONAL MODULES
 
@@ -254,7 +253,7 @@
 #key_SSID="s:foobar enc open"
 #key_SSID="1234-5678-9012 enc open"
 
-# You may want to set muliple keys - here's an example
+# You may want to set multiple keys - here's an example
 # It sets 4 keys on the card and instructs to use key 2 by default
 #key_SSID="[1] s:passkey1 key [2] s:passkey2 key [3] s:passkey3 key [4] s:passkey4 key [2]"
 
@@ -284,7 +283,7 @@
 #dns_servers_001122334455="192.168.0.1 192.168.0.2"
 
 # Map a MAC address to an SSID
-# This is used when the Access Point is not broadcasting it's SSID
+# This is used when the Access Point is not broadcasting its SSID
 # WARNING: This will override the SSID being broadcast due to some
 # Access Points sending an SSID even when they have been configured
 # not to!
@@ -295,7 +294,7 @@
 # This lists the preferred SSIDs to connect to in order
 # SSID's can contain any characters here as they must match the broadcast
 # SSID exactly.
-# Surround each SSID with the " character and seperate them with a space
+# Surround each SSID with the " character and separate them with a space
 # If the first SSID isn't found then it moves onto the next
 # If this isn't defined then it connects to the first one found
 #preferred_aps="SSID1 SSID2" 
@@ -308,9 +307,9 @@
 # "any" means it will connect to visible APs in the preferred list and then any
 # other available AP
 # "preferredonly" means it will only connect to visible APs in the preferred list
-# "forcepreferred" means it will forceably connect to APs in order if it does not find
+# "forcepreferred" means it will forcibly connect to APs in order if it does not find
 # them in a scan
-# "forcepreferredonly" means it forceably connects to the APs in order and does not bother
+# "forcepreferredonly" means it forcibly connects to the APs in order and does not bother
 # to scan
 # "forceany" does the same as forcepreferred + connects to any other available AP
 # Default is "any"
@@ -337,16 +336,16 @@
 
 ############################################################
 # wpa_supplicant
-# emerge net-wireless/wpa-supplicant
+# emerge net-wireless/wpa_supplicant
 # Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Console the wpa_supplicant.conf.example that is installed in
+# Consult the wpa_supplicant.conf.example that is installed in
 # /usr/share/doc/wpa_supplicant
 # To configure wpa_supplicant
 #wpa_supplicant_ath0="-Dmadwifi" # For Atheros based cards
 # Consult wpa_supplicant for more drivers - the default is -Dwext which should
 # work for most cards.
 
-# By default we don't wait for wpa_suppliant to associate and authenticate.
+# By default we don't wait for wpa_supplicant to associate and authenticate.
 # If you need to change this behaviour then you don't know how our scripts work
 # and setting this value could cause strange things to happen.
 # If you would like to, so can specify how long in seconds.
@@ -449,7 +448,7 @@
 # Set generic DHCP options like so
 #dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
 
-# This tells the dhcp client to release it's lease when it stops, not to
+# This tells the dhcp client to release its lease when it stops, not to
 # overwrite dns, ntp and nis settings, not to set a default route and not to
 # send the current hostname to the dhcp server and when it starts.
 # You can use any combination of the above options - the default is not to
@@ -565,12 +564,18 @@
 
 #-----------------------------------------------------------------------------
 # Bonding
-# For link bonding/trunking emerge net-misc/ifenslave
+# For link bonding/trunking on 2.4 kernels, or kernels without sysfs
+# emerge net-misc/ifenslave
 
 # To bond interfaces together
 #slaves_bond0="eth0 eth1 eth2"
 #config_bond0="null" # You may not want to assign an IP the the bond
 
+# You can also configure the bond here, which must be done via sysfs on 2.6
+# kernels or newer. See the kernel bonding documentation for a description of
+# these options.
+#arp_ip_target_bond0="+26.0.0.0"
+
 # If any of the slaves require extra configuration - for example wireless or
 # ppp devices - we need to depend function on the bonded interfaces
 #rc_need_bond0="net.eth0 net.eth1"
@@ -653,7 +658,7 @@
 #
 # Dead peer detection
 #	lcp-echo-interval 15	# Send a LCP echo every 15 seconds
-#	lcp-echo-failure 3	# Make peer dead after 3 consective
+#	lcp-echo-failure 3	# Make peer dead after 3 consecutive
 #				# echo-requests
 #	
 # Compression options - use these to completely disable compression
@@ -817,8 +822,8 @@
 #config_nas0="'192.168.0.1/24'"
 
 #-----------------------------------------------------------------------------
-# Tunnelling
-# WARNING: For tunnelling it is highly recommended that you
+# Tunneling
+# WARNING: For tunneling it is highly recommended that you
 # emerge sys-apps/iproute2
 #
 # For GRE tunnels
@@ -833,7 +838,7 @@
 
 # 6to4 Tunnels allow IPv6 to work over IPv4 addresses, provided you
 # have a non-private address configured on an interface.
-# link_6to4="eth0"		# Interface to base it's addresses on
+# link_6to4="eth0"		# Interface to base its addresses on
 # config_6to4="ip6to4"
 # You may want to depend on eth0 like so
 #rc_need_6to4="net.eth0"
@@ -843,7 +848,7 @@
 # sit0 - otherwise use a different name like 6to4 in the example above.
 
 # You can also specify a relay and suffix if you like.
-# The default relay is 192.88.99.1 and the defualt suffix is :1
+# The default relay is 192.88.99.1 and the default suffix is :1
 #relay_6to4="192.168.3.2"
 #suffix_6to4=":ff"
 
@@ -891,7 +896,7 @@
 # and you're done :)
 
 # By default we don't wait for netplug/ifplugd to configure the interface.
-# If you would like it to wait so that other services now that network is up
+# If you would like it to wait so that other services know that network is up
 # then you can specify a timeout here.
 #plug_timeout="10"
 # A value of 0 means wait forever.
@@ -931,8 +936,8 @@
 
 #preup() {
 #	# Test for link on the interface prior to bringing it up.  This
-#	# only works on some network adapters and requires the mii-diag
-#	# package to be installed.
+#	# only works on some network adapters and requires the
+#	# sys-apps/net-tools package to be installed.
 #	if mii-tool "${IFACE}" 2> /dev/null | grep -q 'no link'; then
 #		ewarn "No link on ${IFACE}, aborting configuration"
 #		return 1
@@ -982,7 +987,7 @@
 #	#	'from 24.80.102.112/32 to 192.168.1.0/24 table localnet priority 100' \
 #	#	'from 216.113.223.51/32 to 192.168.1.0/24 table localnet priority 100' \
 #	#"
-#	eval set -- $\rules_${IFVAR}
+#	eval set -- \$rules_${IFVAR}
 #	if [ $# != 0 ]; then
 #		einfo "Adding IP policy routing rules"
 #		eindent
@@ -993,7 +998,7 @@
 #		else
 #			for x; do
 #				ebegin "${x}"
-#				ip rule add ${x} dev "${IFACE}"
+#				ip rule add ${x}
 #				eend $?
 #			done
 #		fi
@@ -1006,7 +1011,7 @@
 
 #postdown() {
 #	# Enable Wake-On-LAN for every interface except for lo
-#	# Probably a good idea to set RC_DOWN_INTERFACE="no" in /etc/conf.d/rc
+#	# Probably a good idea to set ifdown="no" in /etc/conf.d/net
 #	# as well ;)
 #	[ "${IFACE}" != "lo" ] && ethtool -s "${IFACE}" wol g
 

etc.BSD/Makefile

@@ -1,10 +0,0 @@
-DIR=		${SYSCONFDIR}
-CONF=		rc rc.shutdown
-
-MK=		../mk
-include ${MK}/scripts.mk
-include Makefile.${OS}
-
-.SUFFIXES:	.in
-.in:
-	sed -e 's:@SHELL@:${SHELL}:' -e 's:@TERM@:${DEFTERM}:' $< > $@

etc.BSD/Makefile.FreeBSD

@@ -1 +0,0 @@
-DEFTERM=	cons25

etc.BSD/Makefile.NetBSD

@@ -1 +0,0 @@
-DEFTERM=	wsvt25

etc.FreeBSD/Makefile

@@ -1,6 +0,0 @@
-DIR=	/etc
-CONF=	devd.conf
-BIN=	rc.devd
-
-MK=	../mk
-include ${MK}/scripts.mk

etc.Linux/Makefile

@@ -1,5 +0,0 @@
-DIR=		${SYSCONFDIR}
-CONF_APPEND=	rc.conf
-
-MK=		../mk
-include ${MK}/scripts.mk

etc.Linux/rc.conf

@@ -1,25 +0,0 @@
-
-##############################################################################
-# LINUX SPECIFIC OPTIONS
-
-# This is the number of tty's used in most of the rc-scripts (like
-# consolefont, numlock, etc ...)
-rc_tty_number=12
-
-# Use this variable to control the /dev management behavior.
-#  devfs  - use devfs (requires sys-fs/devfsd)
-#  mdev   - use mdev (requires sys-apps/busybox)
-#  udev   - use udev (requires sys-fs/udev)
-#  static - let the user manage /dev (YOU need to create ALL device nodes)
-# Leave it blank to let rc work it out (udev, mdev, devfs, static)
-#rc_devices=""
-
-# UDEV OPTION:
-# Set to "yes" if you want to save /dev to a tarball on shutdown
-# and restore it on startup.  This is useful if you have a lot of
-# custom device nodes that udev does not handle/know about.
-rc_device_tarball="NO"
-
-# Sets the level at which logging of messages is done to the
-# console.  See dmesg(8) for more info.
-dmesg_level="1"

etc/.gitignore

@@ -1,2 +1,3 @@
+rc.conf
 rc
 rc.shutdown

etc/Makefile

@@ -1,5 +1,9 @@
 DIR=	${SYSCONFDIR}
 CONF=	rc.conf
 
+CLEANFILES+=	rc.conf
+
 MK=	../mk
+include ${MK}/os.mk
+include Makefile.${OS}
 include ${MK}/scripts.mk

etc/Makefile.FreeBSD

@@ -0,0 +1,4 @@
+SED_EXTRA=	-e 's:@TERM@:cons25:g'
+SRCS+=		rc.conf.in rc.in rc.shutdown.in
+CONF+=		devd.conf
+BIN+=		rc rc.shutdown rc.devd

etc/Makefile.Linux

@@ -0,0 +1,6 @@
+SED_EXTRA=	-e 's:@TERM@:wsvt25:g'
+SRCS+=		rc.in rc.shutdown.in
+
+rc.conf:
+	cp rc.conf.in rc.conf
+	cat rc.conf.Linux >> rc.conf

etc/Makefile.NetBSD

@@ -0,0 +1,3 @@
+SED_EXTRA=	-e 's:@TERM@:wsvt25:g'
+SRCS+=		rc.conf.in rc.in rc.shutdown.in
+BIN+=		rc rc.shutdown

etc/rc.conf.Linux

@@ -0,0 +1,8 @@
+
+##############################################################################
+# LINUX SPECIFIC OPTIONS
+
+# This is the number of tty's used in most of the rc-scripts (like
+# consolefont, numlock, etc ...)
+rc_tty_number=12
+

etc/rc.conf.in

@@ -2,14 +2,23 @@
 
 # Set to "YES" if you want the rc system to try and start services
 # in parallel for a slight speed improvement. When running in parallel we
-# prefix the service output with it's name as the output will get
+# prefix the service output with its name as the output will get
 # jumbled up.
-rc_parallel="NO"
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
+#rc_parallel="NO"
 
 # Set rc_interactive to "YES" and you'll be able to press the I key during
 # boot so you can choose to start specific services. Set to "NO" to disable
 # this feature.
-rc_interactive="YES"
+#rc_interactive="YES"
+
+# If we need to drop to a shell, you can specify it here.
+# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
+# otherwise /bin/sh
+# Linux users could specify /sbin/sulogin
+#rc_shell=/bin/sh
 
 # Do we allow any started service in the runlevel to satisfy the depedency
 # or do we want all of them regardless of state? For example, if net.eth0
@@ -17,47 +26,57 @@ rc_interactive="YES"
 # both will be started, but services that depend on 'net' will work if either
 # one comes up. With rc_depend_strict="YES" we would require them both to
 # come up.
-rc_depend_strict="YES"
+#rc_depend_strict="YES"
 
-# Do we allow services to be hotplugged? If not, set to rc_hotplug="NO"
-# NOTE: This does not affect anything hotplug/udev/devd related, just the
-# starting/stopping of the init.d service triggered by it.
-rc_hotplug="YES"
-
-# Dynamic /dev managers can trigger coldplug events which cause services to
-# start before we are ready for them. If this happens, we can defer these
-# services to start in the boot runlevel. Set rc_coldplug="NO" if you don't
-# want this.
-# NOTE: This also affects module coldplugging in udev-096 and higher
-# If you want module coldplugging but not coldplugging of services then you
-# can set rc_coldplug="YES" and rc_plug_services="!*"
-rc_coldplug="YES"
-
-# Some people want a finer grain over hotplug/coldplug. rc_plug_services is a
-# list of services that are matched in order, either allowing or not. By
-# default we allow services through as rc_coldplug/rc_hotplug has to be YES
-# anyway.
-# Example - rc_plug_services="net.wlan !net.*"
+# rc_hotplug is a list of services that we allow to be hotplugged.
+# By default we do not allow hotplugging.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# This service is intrinsically included in the boot runlevel.
+# To disable services, prefix with a !
+# Example - rc_hotplug="net.wlan !net.*"
 # This allows net.wlan and any service not matching net.* to be plugged.
-rc_plug_services=""
+# Example - rc_hotplug="*"
+# This allows all services to be hotplugged
+#rc_hotplug="*"
 
 # rc_logger launches a logging daemon to log the entire rc process to
 # /var/log/rc.log
-rc_logger="NO"
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+#rc_logger="YES"
 
 # By default we filter the environment for our running scripts. To allow other
 # variables through, add them here. Use a * to allow all variables through.
-# rc_env_allow="VAR1 VAR2"
+#rc_env_allow="VAR1 VAR2"
+
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+#rc_start_wait=100
+
+# rc_nostop is a list of services which will not stop when changing runlevels.
+# This still allows the service itself to be stopped when called directly.
+#rc_nostop=""
+
+# rc will attempt to start crashed services by default.
+# However, it will not stop them by default as that could bring down other
+# critical services.
+#rc_crashed_stop=NO
+#rc_crashed_start=YES
 
 ##############################################################################
 # MISC CONFIGURATION VARIABLES
 # There variables are shared between many init scripts
 
 # Set unicode to YES to turn on unicode support for keyboards and screens.
-unicode="NO"
+#unicode="NO"
 
 # Network fstypes. Below is the default.
-net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
+net_fs_list="afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs nfs nfs4 ocfs2 shfs smbfs"
 
 ##############################################################################
 # SERVICE CONFIGURATION VARIABLES

etc/rc.devd

@@ -1,5 +1,5 @@
 #!/bin/sh
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 # Inform RC that we are in the background and hotplugged

etc/rc.in

@@ -1,5 +1,5 @@
 #!@SHELL@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 # If $TERM is not set then assume default of @TERM@
@@ -10,12 +10,9 @@
 trap : SIGINT
 trap "echo 'Boot interrupted'; exit 1" SIGQUIT
 
-# BSD's init works somewhat differently to sysvinit.
-# This block should 'translate' from the way init calls it to the way it would
-# be called by sysvinit on linux.
-RUNLEVEL="1" /sbin/rc sysinit || exit 1
-RUNLEVEL="1" /sbin/rc boot || exit 1
-PREVLEVEL="1" /sbin/rc default
+/sbin/rc sysinit || exit 1
+/sbin/rc boot || exit 1
+/sbin/rc default
 
 # We don't actually care if rc default worked or not, we should exit 0
 # to allow logins

etc/rc.shutdown.in

@@ -1,5 +1,5 @@
 #!@SHELL@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 # Handle interrupts 
@@ -14,13 +14,4 @@ export LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}"
 [ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@"
 
 action=${1:-shutdown}
-
-# BSD's init works somewhat differently to sysvinit.
-# This block should 'translate' from the way init calls it to the way it would
-# be called by sysvinit on linux.
-case "${action}" in
-	reboot) 	export RUNLEVEL=6;;
-	single)		export RUNLEVEL=S;;
-	*)		export RUNLEVEL=0;;
-esac
 exec /sbin/rc "${action}"

init.d.BSD/.gitignore

@@ -1,10 +0,0 @@
-hostid
-moused
-newsyslog
-pf
-rarpd
-rc-enabled
-rpcbind
-savecore
-sysctl
-syslogd

init.d.BSD/Makefile

@@ -1,7 +0,0 @@
-DIR=	${INITDIR}
-SRCS=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-	rpcbind.in savecore.in sysctl.in syslogd.in
-BIN=	${OBJS}
-
-MK=	../mk
-include ${MK}/scripts.mk

init.d.BSD/moused.in

@@ -1,62 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-mouse=${SVCNAME##*.}
-if [ -n "${name}" -a "${mouse}" != "moused" ]; then
-	moused_device=/dev/"${mouse}"
-	pidfile=/var/run/moused-"${mouse}".pid
-else
-	pidfile=/var/run/moused.pid
-fi
-name="Console Mouse Daemon"
-[ -n "${moused_device}" ] && name="${name} (${moused_device})"
-
-depend()
-{
-	need localmount
-	after bootmisc
-	keyword nojail noprefix
-}
-
-start()
-{
-	ebegin "Starting ${name}" 
-
-	if [ -z "${moused_device}" ]; then
-		local dev=
-		for dev in /dev/psm[0-9]* /dev/ums[0-9]*; do
-			[ -c "${dev}" ] || continue
-			[ -e /var/run/moused-"${dev##*/}".pid ] && continue 
-			moused_device=${dev}
-			eindent
-			einfo "Using mouse on ${moused_device}"
-			eoutdent
-			break
-		done
-	fi
-
-	if [ -z "${moused_device}" ]; then
-		eend 1 "No mouse device found" 
-		return 1
-	fi
-
-	local args=
-	eval args=\$moused_args_${moused_device##*/}
-	[ -z "${args}" ] && args=${moused_args}
-
-	start-stop-daemon --start --exec /usr/sbin/moused \
-		--pidfile "${pidfile}" \
-		-- ${args} -p "${moused_device}" -I "${pidfile}"
-	local retval=$?
-	
-	if [ ${retval} = 0 ]; then
-		local ttyv=
-		for ttyv in /dev/ttyv*; do
-			vidcontrol < "${ttyv}" -m on
-			: $((retval+= $?))
-		done
-	fi
-	
-	eend ${retval} "Failed to start moused"
-}

init.d.BSD/rarpd.in

@@ -1,28 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-command=/usr/sbin/rarpd
-command_args="-f ${rarpd_args}"
-pidfile=/var/run/rarpd.pid
-name="Reverse ARP Daemon"
-required_files="/etc/ethers"
-
-if [ -z "${rarpd_interface}" ]; then
-	command_args="${command_args} -a"
-else
-	command_args="${command_args} ${rarpd_interface}"
-fi
-command_background="YES"
-
-depend()
-{
-	need localmount
-	after bootmisc
-
-	if [ -z "${rarpd_interface}" ]; then
-		need net
-	else
-		net net."${rarpd_interface}"
-	fi
-}

init.d.BSD/savecore.in

@@ -1,36 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-description="Saves a kernel dump."
-
-depend()
-{
-	need localmount
-	keyword nojail noprefix
-}
-
-start()
-{
-	local dump_dir=${dump_dir:-/var/crash}
-	if ! [ -d "${dump_dir}" ]; then
-		mkdir -p "${dump_dir}"
-		chmod 700 "${dump_dir}"
-	fi
-
-	if [ "${RC_UNAME}" = "FreeBSD" ]; then
-		# Don't quote ${dump_device}, so that if it's unset,
-		# savecore will check on the partitions listed in fstab
-		# without errors in the output
-		savecore -C "${dump_dir}" ${dump_device} >/dev/null
-	else
-		ls "${dump_dir}"/bsd* > /dev/null 2>&1
-	fi
-	[ $? = 0 ] || return 0
-
-	local sopts="${dump_dir} ${dump_device}"
-	yesno ${dump_compress} && sopts="-z ${sopts}"
-	ebegin "Saving kernel core dump in ${dump_dir}"
-	savecore ${sopts} >/dev/null
-	eend $?
-}

init.d.BSD/sysctl.in

@@ -1,26 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-depend()
-{
-	use hostname
-	before bootmisc logger
-	keyword noprefix
-}
-
-start()
-{
-	[ -e /etc/sysctl.conf ] || return 0
-	
-	ebegin "Configuring kernel parameters"
-	local retval=0 var= comments=
-	while read var comments; do
-		case "${var}" in
-			""|"#"*) continue;;
-		esac
-		sysctl -w "${var}" >/dev/null || retval=1
-	done < /etc/sysctl.conf
-	eend ${retval} "Some errors were encountered"
-	eend $?
-}

init.d.FreeBSD/.gitignore

@@ -1,8 +0,0 @@
-clock
-devd
-dumpon
-ipfw
-mixer
-nscd
-powerd
-syscons

init.d.FreeBSD/Makefile

@@ -1,6 +0,0 @@
-DIR=	${INITDIR}
-SRCS=	clock.in devd.in dumpon.in ipfw.in mixer.in nscd.in powerd.in syscons.in
-BIN=	${OBJS}
-
-MK=	../mk
-include ${MK}/scripts.mk

init.d.FreeBSD/syscons.in

@@ -1,83 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-depend() {
-	need localmount
-	keyword nojail noprefix
-}
-
-start() {
-	if [ -n "${allscreen_flags}" ]; then
-		ebegin "Setting mode to ${allscreen_flags} for all screens"
-		for v in /dev/ttyv*; do
-			vidcontrol ${allscreen_flags} <"${v}"
-		done
-		eend $?
-	fi
-	
-	if [ -n "${keymap}" ]; then
-		ebegin "Setting keymap to ${keymap}"
-		kbdcontrol -l ${keymap} </dev/console
-		eend $?
-	fi
-	
-	if [ -n "${keyrate}" ]; then
-		ebegin "Setting keyrate to ${keyrate}"
-		kbdcontrol -r ${keyrate} </dev/console
-		eend $?
-	fi
-
-	if [ -n "${keychange}" ]; then
-		ebegin "Changing function keys"
-		eval set -- "${keychange}"
-		eindent
-		while [ $# -gt 0 ]; do
-			veinfo "F$1 -> \`$2'"
-			kbdcontrol -f "$1" "$2" </dev/console
-			veend $?
-			shift; shift
-		done
-		eoutdent
-	fi
-	
-	if [ -n "${cursor}" ]; then
-		ebegin "Setting cursor"
-		vidcontrol -c ${cursor}
-		eend $?
-	fi
-
-	local v= f=
-	for v in font8x16 font8x14 font8x8; do
-		f=$(eval \$"${v}")
-		if [ -n "${f}" ]; then
-			ebegin "Setting font ${f}"
-			vidcontrol -f ${v##FONT} ${f}
-			eend $?
-		fi
-	done
-
-	if [ -n "${blanktime}" ]; then
-		ebegin "Setting blanktime"
-		vidcontrol -t ${blanktime}
-		eend $?
-	fi
-
-	if [ -n "${saver}" ]; then
-		local i=
-		for i in $(kldstat | sed -n -e 's/.* \(splash_.*\)/\1/p'); do
-			kldunload "${i}"
-		done
-		kldstat -v | grep -q _saver || kldload ${saver}_saver
-	fi
-
-	if [ -n "${kbdflags}" ]; then
-		ebegin "Setting keyboard flags for all screens"
-		for v in /dev/ttyv*; do
-			kbdcontrol ${kbdflags} <${v}
-		done
-		eend $?
-	fi
-
-	return 0
-}

init.d.Linux/.gitignore

@@ -1,8 +0,0 @@
-clock
-consolefont
-keymaps
-modules
-mtab
-numlock
-procfs
-sysctl

init.d.Linux/Makefile

@@ -1,7 +0,0 @@
-DIR=	${INITDIR}
-SRCS=	clock.in consolefont.in keymaps.in modules.in mtab.in numlock.in \
-	procfs.in sysctl.in
-BIN=${OBJS}
-
-MK=	../mk
-include ${MK}/scripts.mk

init.d.Linux/clock.in

@@ -1,136 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-extra_commands="save show"
-
-description="Sets the local clock to UTC or Local Time." 
-description_save="Saves the current time in the BIOS."
-description_show="Displays the current time in the BIOS."
-
-clock_adjfile=${clock_adjfile:-${CLOCK_ADJFILE}}
-clock_args=${clock_args:-${CLOCK_OPTS}}
-clock_systohc=${clock_systohc:-${CLOCK_SYSTOHC}}
-
-clock=${clock:-${CLOCK:-UTC}}
-if [ "${clock}" = "UTC" ]; then
-	utc="UTC"
-	utc_cmd="--utc"
-else
-	utc="Local Time"
-	utc_cmd="--localtime"
-fi
-
-depend()
-{
-	if yesno ${clock_adjfile}; then
-		use root
-	else
-		before *
-	fi
-	keyword noopenvz noprefix nouml novserver noxenu
-}
-
-setupopts()
-{
-	case "$(uname -m)" in
-		s390*)
-			utc="s390"
-			;;
-		*)
-			if [ -e /proc/devices ] && \
-				grep -q " cobd$" /proc/devices
-			then
-				utc="coLinux"
-			fi
-			;;
-	esac
-
-	case "${utc}" in
-		UTC|Local" "Time);;
-		*) unset utc_cmd;;
-	esac
-}
-
-# hwclock doesn't always return non zero on error
-_hwclock()
-{
-	local err="$(hwclock "$@" 2>&1 >/dev/null)"
-
-	[ -z "${err}" ] && return 0
-	echo "${err}" >&2
-	return 1
-}
-
-start()
-{
-	local retval=0 errstr=""
-	setupopts
-
-	if [ -z "${utc_cmd}" ]; then
-		ewarn "Not setting clock for ${utc} system"
-		return 0
-	fi
-
-	ebegin "Setting system clock using the hardware clock [${utc}]"
-	if [ -e /proc/modules -a ! -e /dev/rtc ]; then
-		modprobe -q rtc || modprobe -q genrtc
-	fi
-
-	if [ -e /etc/adjtime ] && yesno ${clock_adjfile}; then
-		_hwclock --adjust ${utc_cmd}
-		retval=$((${retval} + $?))
-	fi
-	
-	# If setting UTC, don't bother to run hwclock when first booting
-	# as that's the default
-	if [ "${PREVLEVEL}" != "N" -o \
-		"${utc_cmd}" != "--utc" -o \
-		-n "${clock_args}" ];
-	then
-		_hwclock --hctosys ${utc_cmd} ${clock_args}
-		retval=$((${retval} + $?))
-	fi
-	
-	eend ${retval} "Failed to set the system clock"
-
-	return 0
-}
-
-stop()
-{
-	# Don't tweak the hardware clock on LiveCD halt.
-	[ -n "${CDBOOT}" ] && return 0
-	yesno ${clock_systohc} || return 0
-
-	local retval=0 errstr=""
-	setupopts
-
-	[ -z "${utc_cmd}" ] && return 0
-
-	ebegin "Setting hardware clock using the system clock" "[${utc}]"
-
-	if ! yesno "${clock_adjfile}"; then
-		# Some implementations don't handle adjustments
-		if LC_ALL=C hwclock --help | grep -q "\-\-noadjfile"; then
-			utc_cmd="${utc_cmd} --noadjfile"
-		fi
-	fi
-
-	_hwclock --systohc ${utc_cmd} ${clock_args}
-	retval=$?
-
-	eend ${retval} "Failed to sync clocks" 
-}
-
-save()
-{
-	clock_systohc="yes"
-	stop
-}
-
-show()
-{
-	setupopts
-	hwclock --show "${utc_cmd}" ${clock_args} 
-}

init.d.Linux/consolefont.in

@@ -1,78 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-description="Sets a font for the consoles."
-
-depend()
-{
-	need localmount
-	need keymaps    # sets up terminal encoding scheme
-	after hotplug
-	keyword noopenvz noprefix nouml novserver noxenu
-}
-
-start()
-{
-	# Forget about any font until we are successful
-	rm -rf "${RC_LIBDIR}"/console
-
-	ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
-	consolefont=${consolefont:-${CONSOLEFONT}}
-	unicodemap=${unicodemap:-${UNICODEMAP}}
-	consoletranslation=${consoletranslation:-${CONSOLETRANSLATION}}
-
-	if [ -z "${consolefont}" ]; then
-		ebegin "Using the default console font"
-		eend 0
-		return 0
-	fi
-
-	if [ "${ttyn}" = 0 ]; then
-		ebegin "Skipping font setup (rc_tty_number == 0)"
-		eend 0
-		return 0
-	fi
-
-	local x= param= sf_param= retval=0 ttydev=
-
-	# Get additional parameters
-	if [ -n "${consoletranslation}" ]; then
-		param="${param} -m ${consoletranslation}"
-	fi
-	if [ -n "${unicodemap}" ]; then
-		param="${param} -u ${unicodemap}"
-	fi
-
-	# Set the console font
-	ebegin "Setting user font"
-	[ -d /dev/vc ] \
-		&& ttydev=/dev/vc/ \
-		|| ttydev=/dev/tty
-
-	x=1
-	while [ ${x} -le ${ttyn} ]; do
-		setfont ${consolefont} ${param} -C ${ttydev}${x} >/dev/null 
-		retval=$((${retval} + $?))
-		x=$((${x} + 1))
-	done
-	eend ${retval}
-
-	# Store the last font so we can use it ASAP on boot
-	if [ ${retval} -eq 0 -a -w "${RC_LIBDIR}" ]; then
-		mkdir -p "${RC_LIBDIR}"/console
-
-		for font in /usr/share/consolefonts/"${consolefont}".*; do
-			:
-	     	done
-		cp "${font}" "${RC_LIBDIR}"/console
-		echo "${font##*/}" > "${RC_LIBDIR}"/console/font
-		if yesno ${unicode:-${UNICODE}}; then
-			cp /dev/null "${RC_LIBDIR}"/console/unicode
-		else
-			rm -f "${RC_LIBDIR}"/console/unicode
-		fi
-	fi
-
-	return ${retval}
-}

init.d.Linux/keymaps.in

@@ -1,69 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-description="Applies a keymap for the consoles."
-
-ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
-unicode=${unicode:-${UNICODE}}
-keymap=${keymap:-${KEYMAP}}
-extended_keymaps=${extended_keymaps:-${EXTENDED_KEYMAPS}}
-windowskeys=${windowskeys:-${SET_WINDOWSKEYS}} 
-fix_euro=${fix_euro:-${FIX_EURO}}
-dumpkeys_charset=${dumpkeys_charset:-${DUMPKEYS_CHARSET}}
-
-depend()
-{
-	need localmount
-	keyword noopenvz noprefix nouml novserver noxenu
-}
-
-start()
-{
-	if [ -z "${keymap}" ]; then
-		eerror "You need to setup keymap in /etc/conf.d/keymaps first"
-		return 1
-	fi
-
-	local ttydev= n=
-	[ -d /dev/vc ] \
-		&& ttydev=/dev/vc/ \
-		|| ttydev=/dev/tty
-
-	# Force linux keycodes for PPC.
-	if [ -f /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes ]; then
-		echo 1 > /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
-	fi
-
-	ebegin "Loading key mappings"
-	local loadkeys_uni= wkeys= 
-	yesno ${unicode} && loadkeys_uni="--unicode"
-	yesno ${windowskeys} && wkeys="windowkeys"
-	loadkeys -q ${loadkeys_uni} ${wkeys} ${keymap} ${extended_keymaps} 
-	eend $? "Error loading key mappings" || return $?
-
-	if yesno ${fix_euro}; then
-		# Fix some fonts displaying the Euro, #173528.
-		echo "altgr keycode 18 = U+20AC" | loadkeys -q
-	fi
-
-	# Set terminal encoding to either ASCII or UNICODE.
-	# See utf-8(7) for more information.
-	local termencoding="%@" termmsg="ASCII" kmode="-a"
-	if yesno ${unicode}; then
-		dumpkeys ${dumpkeys_charset:+-c} \
-			${dumpkeys_charset} | loadkeys --unicode
-		termencoding="%G"
-		termmsg="UTF-8"
-		kmode="-u"
-	fi
-
-	ebegin "Setting terminal encoding to" ${termmsg}
-	n=1
-	while [ ${n} -le "${ttyn}" ]; do
-		printf "\033%s" "${termencoding}" >"${ttydev}${n}"
-		kbd_mode "${kmode}" -C "${ttydev}${n}"
-		n=$((${n} + 1))
-	done
-	eend 0
-}

init.d.Linux/modules.in

@@ -1,50 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-description="Loads a user defined list of kernel modules."
-
-depend()
-{
-	use isapnp
-	keyword noopenvz noprefix novserver
-}
-
-start()
-{
-	# Should not fail if kernel do not have module
-	# support compiled in ...
-	[ ! -f /proc/modules ] && return 0
-
-	local KV=$(uname -r)
-	local KV_MAJOR=${KV%%.*}
-	local x=${KV#*.}
-	local KV_MINOR=${x%%.*}
-	x=${KV#*.*.}
-	local KV_MICRO=${x%%-*}
-
-	local list= x= args= cnt=0
-	for x in "${KV}" \
-		${KV_MAJOR}.${KV_MINOR}.${KV_MICRO} \
-		${KV_MAJOR}.${KV_MINOR} \
-	; do
-		eval list=\$modules_$(shell_var "${x}")
-		[ -n "${list}" ] && break
-	done
-	[ -z "${list}" ] && list=${modules}
-
-	for x in ${list}; do
-		ebegin "Loading module ${x}"
-		eval args=\$module_$(shell_var "${x}")_args
-		eval modprobe -q "${x}" "${args}"
-		eend $? "Failed to load ${x}" && cnt=$((${cnt} + 1))
-	done
-	einfo "Autoloaded ${cnt} module(s)"
-
-	# Just in case a sysadmin prefers generic symbolic links in
-	# /lib/modules/boot for boot time modules we will load these modules
-	[ -n "$(modprobe -l -t boot)" ] && modprobe -a -t boot \* 2>/dev/null
-	
-	# Above test clobbers the return
-	return 0
-}

init.d.Linux/sysctl.in

@@ -1,18 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-depend()
-{
-	use hostname
-	before bootmisc logger
-	keyword noopenvz noprefix novserver
-}
-
-start()
-{
-	[ -e /etc/sysctl.conf ] || return 0
-	ebegin "Configuring kernel parameters"
-	sysctl -p /etc/sysctl.conf >/dev/null
-	eend $?
-}

init.d.NetBSD/.gitignore

@@ -1,3 +0,0 @@
-swap-blk
-ttys
-wscons

init.d.NetBSD/Makefile

@@ -1,6 +0,0 @@
-DIR=	${INITDIR}	
-SRCS=	swap-blk.in ttys.in wscons.in
-BIN=	${OBJS}
-
-MK=	../mk
-include ${MK}/scripts.mk

init.d.NetBSD/wscons.in

@@ -1,100 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright 2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-depend()
-{
-	need localmount
-	keyword noprefix
-}
-
-start()
-{
-	wscfg=/usr/sbin/wsconscfg
-	wsfld=/usr/sbin/wsfontload
-	wsctl=/sbin/wsconsctl
-	config=/etc/wscons.conf
-
-	# args mean:
-	#	screen idx scr emul
-	#	font   name width height enc file
-	while read type arg1 arg2 arg3 arg4 arg5; do
-		case "${type}" in
-			\#*|"")
-				continue
-				;;
-
-			font)
-				cmd=${wsfld}
-				[ "${arg2}" != "-" ] && cmd="${cmd} -w ${arg2}"
-				[ "${arg3}" != "-" ] && cmd="${cmd} -h ${arg3}" 
-				[ "${arg4}" != "-" ] && cmd="${cmd} -e ${arg4}"
-				cmd="${cmd} -N ${arg1} ${arg5}"
-				eval "${cmd}"				
-				;;
-
-			screen)
-				cmd=${wscfg}
-				[ "${arg2}" != "-" ] && cmd="${cmd} -t ${arg2}"
-				[ "${arg3}" != "-" ] && cmd="${cmd} -e ${arg3}"
-				cmd="${cmd} ${arg1}"
-				eval "${cmd}"
-				;;
-
-			keyboard)
-				cmd=${wscfg}
-				case "${arg1}" in
-					-|auto)
-						cmd="${cmd} -k"
-						;;
-					*)
-						cmd="${cmd} -k ${arg1}"
-						;;
-				esac
-				${cmd}
-				;;
-
-			encoding)
-				eval ${wsctl} -w "\"encoding=${arg1}\""
-				;;
-
-			mapfile)
-				local entry=
-				while read entry; do
-				    case "${entry}" in
-					\#*|"")
-					    continue
-					    ;;
-					*)
-					    cmd="${wsctl} -w \"map+=${entry}\""
-					    eval "${cmd} >/dev/null"
-					    ;;
-				    esac
-				done < "${arg1}"
-				;;
-
-			mux)
-				eval "${wscfg} -m ${arg1}"
-				;;
-
-			setvar)
-				case "${arg1}" in
-				keyboard)
-					cmd="${wsctl} -kw ${arg2}"
-					;;
-				display)
-					cmd="${wsctl} -dw ${arg2}"
-					;;
-				mouse)
-					cmd="${wsctl} -mw ${arg2}"
-					;;
-				*)
-					cmd="${wsctl} -w ${arg1}"
-					;;
-				esac
-				eval "${cmd}"
-				;;
-
-		esac
-	done < "${config}"
-}

init.d.misc/.gitignore

@@ -1,5 +1,6 @@
 avahi-dnsconfd
 avahid
+dhcpcd
 dbus
 hald
 named
@@ -7,3 +8,4 @@ ntpd
 openvpn
 polkitd
 sshd
+wpa_supplicant

init.d.misc/Makefile

@@ -1,7 +1,11 @@
 DIR=	${INITDIR}
-SRCS=	avahi-dnsconfd.in avahid.in dbus.in hald.in named.in ntpd.in \
-	openvpn.in polkitd.in sshd.in
+SRCS=	avahi-dnsconfd.in avahid.in dhcpcd.in dbus.in \
+	hald.in named.in ntpd.in \
+	openvpn.in polkitd.in sshd.in wpa_supplicant.in
 
 MK=	../mk
+
+SED_EXTRA+= -e 's:@VARBASE@:/var:g'
+
 include ${MK}/scripts.mk
 include Makefile.${OS}

init.d.misc/Makefile.FreeBSD

@@ -1 +1 @@
-PREFIX?=	/usr/local
+PKG_PREFIX?=	/usr/local

init.d.misc/Makefile.Linux

@@ -1 +1 @@
-PREFIX=/usr
+PKG_PREFIX?=/usr

init.d.misc/Makefile.NetBSD

@@ -1 +1 @@
-PREFIX?=	/usr/pkg
+PKG_PREFIX?=	/usr/pkg

init.d.misc/avahi-dnsconfd.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/avahi-dnsconfd
-command_args="${avahi_dnsconfd_args} -D"
+command_args="$avahi_dnsconfd_args -D"
 pidfile=@VARBASE@/run/avahi-dnsconfd.pid
 name="Avahi DNS Configuration Daemon"
 

init.d.misc/avahid.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/avahi-daemon
-command_args="${avahid_args} -D"
+command_args="$avahid_args -D"
 pidfile=@VARBASE@/run/avahi-daemon/pid
 name="Avahi Service Advertisement Daemon"
 

init.d.misc/dbus.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/bin/dbus-daemon
-pidfile=@VARBASE@/run/dbus/dbus.pid
+pidfile=@VARBASE@/run/dbus/pid
 command_args="${dbusd_args---system}"
 name="Message Bus Daemon"
 
@@ -15,5 +15,5 @@ depend()
 
 start_pre()
 {
-    mkdir -p $(dirname $pidfile)
+	mkdir -p $(dirname $pidfile)
 }

init.d.misc/dhcpcd.in

@@ -0,0 +1,27 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+command=/sbin/dhcpcd
+pidfile=/var/run/dhcpcd.pid
+command_args=-q
+name="DHCP Client Daemon"
+
+depend()
+{
+	provide net
+	need localmount
+	use logger
+	after bootmisc modules
+	before dns
+}
+
+stop_pre()
+{
+	# When shutting down, kill dhcpcd but preserve network
+	# We do this as /var/run/dhcpcd could be cleaned out when we
+	# return to multiuser.
+	if yesno $RC_GOINGDOWN; then
+		: ${stopsig:=SIGKILL}
+	fi
+}

init.d.misc/dnsmasq.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/dnsmasq
-command_args=${dnsmasq_args}
+command_args=$dnsmasq_args
 pidfile=@VARBASE@/run/dnsmasq.pid
 required_files=/etc/dnsmasq.conf
 
@@ -18,7 +18,7 @@ depend()
 
 reload()
 {
-	ebegin "Reloading ${SVCNAME}"
-	start-stop-daemon --signal SIGHUP --pidfile "${pidfile}"
+	ebegin "Reloading $RC_SVCNAME"
+	start-stop-daemon --signal SIGHUP --pidfile "$pidfile"
 	eend $?
 }

init.d.misc/hald.in

@@ -1,10 +1,10 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/hald
 pidfile=@VARBASE@/run/hald/hald.pid
-command_args="${hald_args}"
+command_args=$hald_args
 name="Hardware Abstraction Layer Daemon"
 
 depend()

init.d.misc/named.in

@@ -1,15 +1,25 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/named
-command_args=${named_args}
-pidfile=@VARBASE@/run/named/pid
+command_args=$named_args
+pidfile=@VARBASE@/run/named.pid
 name="Domain Name server"
 extra_started_commands="reload"
 
 namedb=/etc/namedb
-named_uid=${named_uid:-bind}
+uid=named
+case "$RC_UNAME" in
+	FreeBSD)
+		uid=bind
+		pidfile=@VARBASE@/run/named/pid
+		;;
+	Linux)
+		uid=bind
+		;;
+esac
+: ${named_uid:=${uid}}
 
 depend()
 {
@@ -20,68 +30,71 @@ depend()
 
 start_pre()
 {
-	if [ -n "${named_chroot}" ]; then
+	if [ -n "$named_chroot" ]; then
 		# Create (or update) the chroot directory structure
 		if [ -r /etc/mtree/BIND.chroot.dist ]; then
-			mtree -deU -f /etc/mtree/BIND.chroot.dist -p "${named_chroot}"
+			mtree -deU -f /etc/mtree/BIND.chroot.dist -p "$named_chroot"
 		else
 			ewarn "/etc/mtree/BIND.chroot.dist missing,"
 			ewarn "chroot directory structure not updated"
 		fi
 
-		if [ ! -d "${named_chroot}"/. ]; then
-			eerror "chroot directory ${named_chroot} missing"
+		if [ ! -d "$named_chroot"/. ]; then
+			eerror "chroot directory $named_chroot missing"
 			exit 1
 		fi
 
 		# Create /etc/namedb symlink
-		if [ ! -L "${namedb}" ]; then
-			if [ -d "${namedb}" ]; then
-				ewarn "named chroot: ${namedb} is a directory!"
-			elif [ -e "${namedb}" ]; then
-				ewarn "named chroot: ${namedb} exists!"
+		if [ ! -L "$namedb" ]; then
+			if [ -d "$namedb" ]; then
+				ewarn "named chroot: $namedb is a directory!"
+			elif [ -e "$namedb" ]; then
+				ewarn "named chroot: $namedb exists!"
 			else
-				ln -s "${named_chroot}${namedb}" "${namedb}"
+				ln -s "$named_chroot$namedb" "$namedb"
 			fi
 		else
 			# Make sure it points to the right place.
-			ln -shf "${named_chroot}${namedb}" "${namedb}"
+			ln -shf "$named_chroot$namedb" "$namedb"
 		fi
 
-		case "${RC_UNAME}" in
+		case "$RC_UNAME" in
 			*BSD|DragonFly)
 				# Mount a devfs in the chroot directory if needed
-				umount "${named_chroot}"/dev 2>/dev/null
-				mount -t devfs dev "${named_chroot}"/dev
-				devfs -m "${named_chroot}"/dev ruleset devfsrules_hide_all
-				devfs -m "${named_chroot}"/dev rule apply path null unhide
-				devfs -m "${named_chroot}"/dev rule apply path random unhide
+				umount "$named_chroot"/dev 2>/dev/null
+				mount -t devfs dev "$named_chroot"/dev
+				devfs -m "$named_chroot"/dev \
+					ruleset devfsrules_hide_all
+				devfs -m "$named_chroot"/dev \
+					rule apply path null unhide
+				devfs -m "$named_chroot"/dev \
+					rule apply path random unhide
 				;;
 		esac
 
 		# Copy local timezone information if it is not up to date.
 		if [ -r /etc/localtime ]; then
-			cmp -s /etc/localtime "${named_chroot}/etc/localtime" ||
-		    	cp -p /etc/localtime "${named_chroot}/etc/localtime"
+			cmp -s /etc/localtime "$named_chroot/etc/localtime" ||
+			cp -p /etc/localtime "$named_chroot/etc/localtime"
 		fi
 
-		command_args="${command_args} -t ${named_chroot}"
+		command_args="$command_args -t $named_chroot"
 
-		ln -fs "${named_chroot}${pidfile}" "${pidfile}"
+		ln -fs "$named_chroot$pidfile" "$pidfile"
 	fi
 
-	if [ ! -s "${named_chroot}${namedb}/rndc.conf" ]; then
-		local confgen="${command%/named}/rndc-confgen -a -b256 -u ${named_uid} \
-	    	-c ${named_chrootdir}/etc/namedb/rndc.key"
-		if [ -s "${named_chroot}${namedb}/rndc.key" ]; then
+	if [ ! -s "$named_chroot$namedb/rndc.conf" ]; then
+		local confgen="${command%/named}/rndc-confgen -a -b256 -u $named_uid \
+			-c $named_chrootdir/etc/namedb/rndc.key"
+		if [ -s "$named_chroot$namedb/rndc.key" ]; then
 			local getuser="stat -f%Su"
-			[ "${RC_UNAME}" = "Linux" ] && getuser="stat -c%U"
-			case $(${getuser} "${named_chroot}${namedb}"/rndc.key) in
-				root|"${named_uid}");;
-				*) ${confgen};;
+			[ "$RC_UNAME" = Linux ] && getuser="stat -c%U"
+			case $(${getuser} "$named_chroot$namedb"/rndc.key) in
+				root|"$named_uid");;
+				*) $confgen;;
 			esac
 		else
-			${confgen}
+			$confgen
 		fi
 	fi
 }
@@ -93,7 +106,7 @@ reload()
 
 stop_post()
 {
-	if [ -n "${named_chroot}" -a -c "${named_chroot}"/dev/null ]; then
-		umount "${named_chroot}"/dev 2>/dev/null || true
+	if [ -n "$named_chroot" -a -c "$named_chroot"/dev/null ]; then
+		umount "$named_chroot"/dev 2>/dev/null || true
 	fi
 }

init.d.misc/ntpd.in

@@ -1,13 +1,14 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
-ntpd_config=${ntpd_config:-/etc/ntp.conf}
-ntpd_drift=${ntpd_drift:-/var/db/ntpd.drift}
+: ${ntpd_config:=/etc/ntp.conf}
+: ${ntpd_drift:=/var/db/ntpd.drift}
 
 command=/usr/sbin/ntpd
+required_files=$ntpd_config
 pidfile=/var/run/ntpd.pid
-command_args="${ntpd_args} -c ${ntpd_config} -f ${ntpd_drift} -p ${pidfile}"
+command_args="$ntpd_args -c $ntpd_config -f $ntpd_drift -p $pidfile"
 name="Network Time Protocol Daemon"
 
 depend()
@@ -19,22 +20,18 @@ depend()
 
 start_pre()
 {
-	if [ ! -r "${ntpd_config}" ]; then
-		eerror "${ntpd_config} is not readable"
-		return 1
-	fi
-
-	if [ -n "${ntpd_chroot}" ]; then
-		case "${RC_UNAME}" in
+	if [ -n "$ntpd_chroot" ]; then
+		case "$RC_UNAME" in
 			*BSD|DragonFly)
-				if [ ! -c "${ntpd_chroot}/dev/clockctl" ]; then
-					rm -f "${ntpd_chroot}/dev/clockctl"
-					(cd /dev; /bin/pax -rw -pe clockctl "${ntpd_chroot}/dev")
+				if [ ! -c "$ntpd_chroot/dev/clockctl" ]; then
+					rm -f "$ntpd_chroot/dev/clockctl"
+					(cd /dev; /bin/pax -rw -pe clockctl \
+					 "$ntpd_chroot/dev")
 				fi
 				;;
 		esac
-		ln -fs "${ntpd_chroot}${ntpd_drift}" "${ntpd_drift}"
+		ln -fs "$ntpd_chroot$ntpd_drift" "$ntpd_drift"
 
-		command_args="${command_args} -u ntpd:ntpd -i ${ntpd_chroot}"
+		command_args="$command_args -u ntpd:ntpd -i $ntpd_chroot"
 	fi
 }

init.d.misc/openvpn.in

@@ -1,31 +1,32 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
-vpn=${SVCNAME#*.}
+vpn=${RC_SVCNAME#*.}
 name="OpenVPN"
-[ "${vpn}" != "openvpn" ] && name="${name} (${vpn})"
+[ "$vpn" != openvpn ] && name="$name ($vpn)"
 command=@PKG_PREFIX@/sbin/openvpn
 
-pidfile=@VARBASE@/run/"${SVCNAME}".pid
-openvpn_dir=${openvpn_dir:-@PKG_PREFIX@/etc/openvpn}
-openvpn_config=${openvpn_config:-${openvpn_dir}/${vpn}.conf}
-command_args="${openvpn_args} --daemon --config ${openvpn_config} --writepid ${pidfile}"
-required_dirs="${openvpn_dir}"
-required_files="${openvpn_config}"
+pidfile=@VARBASE@/run/"$RC_SVCNAME".pid
+: ${openvpn_dir:=@PKG_PREFIX@/etc/openvpn}
+: ${openvpn_config:=$openvpn_dir/$vpn.conf}
+command_args="$openvpn_args --daemon --config $openvpn_config"
+command_args="$command_args --writepid $pidfile"
+required_dirs=$openvpn_dir
+required_files=$openvpn_config
 
 # If we're an openvpn client, then supply a nice default config
 # You can find sample up/down scripts in the OpenRC support/openvpn dir
-if yesno "${openvpn_client}"; then
-	openvpn_up=${openvpn_up:-${openvpn_dir}/up.sh}
-	openvpn_down=${openvpn_down:-${openvpn_dir}/down.sh}
-	command_args="${command_args} --nobind --up-delay --up-restart --down-pre"
-	command_args="${command_args} --up ${openvpn_up}"
-	command_args="${command_args} --down ${openvpn_down}"
-	required_files="${required_files} ${openvpn_up} ${openvpn_down}"
+if yesno $openvpn_client; then
+	: ${openvpn_up:=${openvpn_dir}/up.sh}
+	: ${openvpn_down:=${openvpn_dir}/down.sh}
+	command_args="$command_args --nobind --up-delay --up-restart --down-pre"
+	command_args="$command_args --up $openvpn_up"
+	command_args="$command_args --down $openvpn_down"
+	required_files="$required_files $openvpn_up $openvpn_down"
 	
 	in_background_fake="start stop"
-	start_inactive="YES"
+	start_inactive=YES
 fi
 
 depend()
@@ -38,7 +39,7 @@ depend()
 start_pre()
 {
 	# Linux has good dynamic tun/tap creation
-	if [ "${RC_UNAME}" = "Linux" ]; then
+	if [ "$RC_UNAME" = Linux ]; then
 		if [ ! -e /dev/net/tun ]; then
 			if ! modprobe tun; then
 				eerror "TUN/TAP support is not available in this kernel"
@@ -60,8 +61,7 @@ start_pre()
 	fi
 	
 	# If the config file does not specify the cd option, we do
-	# But if we specify it, we override the config option which we do not want
-	if ! grep -q "^[ \t]*cd[ \t].*" "${openvpn_config}"; then
-		command_args="${command_args} --cd ${openvpn_dir}"
+	if ! grep -q "^[ \t]*cd[ \t].*" "$openvpn_config"; then
+		command_args="$command_args --cd $openvpn_dir"
 	fi
 }

init.d.misc/polkitd.in

@@ -1,10 +1,10 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/polkitd
 pidfile=@VARBASE@/run/polkitd/polkitd.pid
-command_args="${polkitd_args}"
+command_args="$polkitd_args"
 name="PolicyKit Daemon"
 
 depend()

init.d.misc/sshd.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/sshd
-command_args=${sshd_args}
+command_args=$sshd_args
 pidfile=@VARBASE@/run/sshd.pid
 required_files=/etc/ssh/sshd_config
 
@@ -31,5 +31,5 @@ start_pre()
 		eend $? || return 1
 	fi
 
-	${command} -t	
+	$command -t	
 }

init.d.misc/wpa_supplicant.in

@@ -0,0 +1,70 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+command=/usr/sbin/wpa_supplicant
+: ${wpa_supplicant_conf:=/etc/wpa_supplicant.conf}
+wpa_supplicant_if=${wpa_supplicant_if:+-i}$wpa_supplicant_if
+command_args="$wpa_supplicant_args -B -c$wpa_supplicant_conf $wpa_supplicant_if"
+name="WPA Supplicant Daemon"
+
+depend()
+{
+	need localmount
+	use logger
+	after bootmisc modules
+	before dns dhcpcd net
+	keyword -shutdown
+}
+
+find_wireless()
+{
+	local iface=
+
+	case "$RC_UNAME" in
+	Linux)
+		for iface in /sys/class/net/*; do
+			if [ -e "$iface"/wireless -o \
+				-e "$iface"/phy80211 ]
+			then
+				echo "${iface##*/}"
+				return 0
+			fi
+		done
+		;;
+	*)
+		for iface in /dev/net/* $(ifconfig -l 2>/dev/null); do
+			if ifconfig "${iface##*/}" 2>/dev/null | \
+				grep -q "[ ]*ssid "
+			then
+				echo "${iface##*/}"
+				return 0
+			fi
+		done
+		;;
+	esac
+	
+	return 1
+}
+
+append_wireless()
+{
+	local iface= i=
+
+	iface=$(find_wireless)
+	if [ -n "$iface" ]; then
+		for i in $iface; do
+			command_args="$command_args -i$i"
+		done
+	else
+		eerror "Could not find a wireless interface"
+	fi
+}
+
+start_pre()
+{
+	case " $command_args" in
+	*" -i"*) ;;
+	*) append_wireless;;
+	esac
+}

init.d/.gitignore

@@ -1,10 +1,42 @@
 bootmisc
 fsck
-halt.sh
 hostname
 local
 localmount
+moused
+net.lo
+net.lo0
 netmount
+network
 root
+savecache
 swap
+sysctl
 urandom
+devfs
+dmesg
+hwclock
+consolefont
+keymaps
+killprocs
+modules
+mount-ro
+mtab
+numlock
+procfs
+staticroute
+sysfs
+devdb
+hostid
+newsyslog
+pf
+rarpd
+rc-enabled
+rpcbind
+savecore
+swap-blk
+swclock
+syslogd
+termencoding
+ttys
+wscons

init.d/Makefile

@@ -1,7 +1,27 @@
 DIR=	${INITDIR}
-SRCS=	bootmisc.in fsck.in halt.sh.in hostname.in local.in localmount.in \
-	netmount.in root.in swap.in urandom.in
+SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
+	network.in root.in savecache.in staticroute.in swap.in swclock.in \
+	sysctl.in urandom.in
 BIN=	${OBJS}
 
+# Build our old net foo or not
+_OLDNET_SH=	case "${MKOLDNET}" in \
+		[Yy][Ee][Ss]) echo "net.lo";; \
+		*) echo "";; \
+		esac
+_OLDNET!=	${_OLDNET_SH}
+_NET_LO=	${_OLDNET}$(shell ${_OLDNET_SH})
+
+INSTALLAFTER=	_installafter_${_NET_LO}
+CLEANFILES+=	${_NET_LO}
+TARGETS+=	${_NET_LO}
+
 MK=	../mk
+include ${MK}/os.mk
+include Makefile.${OS}
 include ${MK}/scripts.mk
+
+_installafter_: realinstall
+
+_installafter_net.lo: realinstall
+	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO}

init.d/Makefile.FreeBSD

@@ -0,0 +1,13 @@
+NET_LO=	net.lo0
+
+# Generic BSD scripts
+SRCS+=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
+	rpcbind.in savecore.in syslogd.in
+
+# These are FreeBSD specific
+SRCS+=	adjkerntz.in devd.in dumpon.in ipfw.in mixer.in nscd.in \
+	powerd.in syscons.in
+
+.SUFFIXES:	.BSD.in
+.BSD.in:
+	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/Makefile.Linux

@@ -0,0 +1,9 @@
+NET_LO=	net.lo
+
+SRCS+=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in killprocs.in \
+	modules.in mount-ro.in mtab.in numlock.in procfs.in sysfs.in \
+	termencoding.in
+
+.SUFFIXES:	.Linux.in
+.Linux.in:
+	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@