openrc-0.2.5

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

.gitignore

@@ -1 +1,3 @@
 openrc-0.1.tar.bz2
+.gdb_history
+.gdbinit

Makefile

@@ -1,9 +1,9 @@
 # OpenRC Makefile
-# Copyright 2007-2008 Roy Marples 
-# Distributed under the terms of the GNU General Public License v2
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 NAME=		openrc
-VERSION=	0.1
+VERSION=	0.2.5
 PKG=		${NAME}-${VERSION}
 
 SUBDIR=		conf.d doc etc init.d man net sh src

conf.d.BSD/Makefile

@@ -1,5 +0,0 @@
-DIR=	${CONFDIR}
-CONF=	localmount moused powerd rarpd
-
-MK=	../mk
-include ${MK}/scripts.mk

conf.d.FreeBSD/Makefile

@@ -1,5 +0,0 @@
-DIR=	${CONFDIR}
-CONF=	syscons
-
-MK=	../mk
-include ${MK}/scripts.mk

conf.d.Linux/Makefile

@@ -1,6 +0,0 @@
-DIR=		${CONFDIR}
-CONF=		consolefont keymaps modules
-CONF_APPEND=	clock
-
-MK=		../mk
-include ${MK}/scripts.mk

conf.d.Linux/clock

@@ -1,9 +0,0 @@
-
-# Set clock_adjtime if you wish hwclock to try and handle clock drift.
-# Don't set this if you run a ntp service or anything else that handles
-# clock drift.
-clock_adjtime="NO"
-
-# If you wish to pass any other arguments to hwclock during bootup,
-# you may do so here. Alpha users may wish to use --arc or --srm here.
-clock_args=""

conf.d/Makefile

@@ -1,5 +1,7 @@
 DIR=	${CONFDIR}
-CONF=	bootmisc clock fsck hostname local net urandom
+CONF=	bootmisc fsck hostname local net urandom
 
 MK=	../mk
+include ${MK}/os.mk
+include Makefile.${OS}
 include ${MK}/scripts.mk

conf.d/Makefile.FreeBSD

@@ -0,0 +1 @@
+CONF+=	moused powerd rarpd savecore syscons

conf.d/Makefile.Linux

@@ -0,0 +1 @@
+CONF+=	consolefont hwclock keymaps modules

conf.d/Makefile.NetBSD

@@ -0,0 +1 @@
+CONF+=	moused rarpd savecore

conf.d/hwclock

@@ -0,0 +1,14 @@
+# Set CLOCK to "UTC" if your system clock is set to UTC (also known as
+# Greenwich Mean Time).  If your clock is set to the local time, then 
+# set CLOCK to "local".  Note that if you dual boot with Windows, then 
+# you should set it to "local".
+clock="UTC"
+
+# If you want to set the Hardware Clock to the current System Time 
+# during shutdown, then say "YES" here.
+# You normally don't need to do this if you run a ntp daemon.
+clock_systohc="NO"
+
+# If you wish to pass any other arguments to hwclock during bootup,
+# you may do so here. Alpha users may wish to use --arc or --srm here.
+clock_args=""

conf.d/modules

@@ -5,8 +5,11 @@
 #modules_2_6="tun"
 #modules="ohci1394"
 
-# Give the modules some arguments if needed.
-# module_ieee1394_args="debug"
+# Give the modules some arguments if needed, per version if necessary.
+#module_ieee1394_args="debug"
+#module_ieee1394_args_2_6_23_gentoo_r5="ieee1394 ohci1394"
+#module_ieee1394_args_2_6_23="tun ieee1394"
+#module_ieee1394_args_2_6="tun"
 
 # You should consult your kernel documentation and configuration
 # for a list of modules and their options.

conf.d/savecore

@@ -1,29 +1,25 @@
-# Kernel core dump options for FreeBSD kernel.
-# Unless you're a FreeBSD kernel developer or driver writer then this won't
+# Unless you're a kernel developer or driver writer then this won't
 # be of any interest to you at all.
-
 # The following options allow to configure the kernel's core dump
-# facilities. Please read
-# http://www.freebsd.org/doc/en_US.ISO8859-1/books/developers-handbook/kerneldebug.html
-# for more information about Kernel core dumps and kernel debugging.
+# facilities.
 
-# KERNEL_DUMP_DEVICE variable is used to specify which device will be
+# The dump_device variable is used to specify which device will be
 # used by the kernel to write the dump down. This has to be a swap
 # partition, and has to be at least big enough to contain the whole
 # physical memory (see hw.physmem sysctl(8) variable).
 # When the variable is commented out, no core dump will be enabled for
 # the kernel.
-#KERNEL_DUMP_DEVICE="/dev/ad0s1b"
+#dump_device=/dev/ad0s1b
 
-# KERNEL_DUMP_DIR variable is used to tell savecore(8) utility where
+# The dump_dir variable is used to tell savecore(8) utility where
 # to save the kernel core dump once it's restored from the dump
 # device. If unset, /var/crash will be used, as the default of
 # FreeBSD.
-#KERNEL_DUMP_DIR="/var/crash"
+#dump_dir=/var/crash
 
-# KERNEL_DUMP_COMPRESS variable decide whether to compress with
+# The dump_compress variable decide whether to compress with
 # gzip(1) the dump or leave it of its original size (the size of the
 # physical memory present on the system). If set to yes, the -z option
 # will be passed to savecore(8) that will proceed on compressing the
 # dump.
-#KERNEL_DUMP_COMPRESS="NO"
+#dump_compress=NO

doc.Linux/Makefile

@@ -1,5 +0,0 @@
-DIR=	${DOCDIR}/openrc
-INC=	net.example
-
-MK=	../mk
-include ${MK}/scripts.mk

doc/.gitignore

@@ -0,0 +1 @@
+net.example

doc/Makefile

@@ -2,4 +2,6 @@ DIR=	${DOCDIR}/openrc
 INC=	net.example
 
 MK=	../mk
+include ${MK}/os.mk
+include Makefile.${OS}
 include ${MK}/scripts.mk

doc/Makefile.FreeBSD

@@ -0,0 +1,5 @@
+SRCS+=		net.example.in
+
+.SUFFIXES:	.BSD.in
+.BSD.in:
+	${CP} $< $@

doc/Makefile.Linux

@@ -0,0 +1,5 @@
+SRCS+=		net.example.in
+
+.SUFFIXES:	.Linux.in
+.Linux.in:
+	${CP} $< $@

doc/Makefile.NetBSD

@@ -0,0 +1,5 @@
+SRCS+=		net.example.in
+
+.SUFFIXES:	.BSD.in
+.BSD.in:
+	${CP} $< $@

doc/net.example.BSD.in

@@ -87,6 +87,10 @@
 # is how long we wait for carrier. The current default is 3 seconds
 #carrier_timeout_eth0=-1
 
+# You may wish to disable the interface being brought down when stopping.
+# This is only of use for WakeOnLan.
+#ifdown_eth0="NO"
+
 ##############################################################################
 # OPTIONAL MODULES
 

doc/net.example.Linux.in

@@ -120,6 +120,10 @@
 # tables you may have to set a global metric as the due to a simple read of
 # the routing table taking over a minute at a time.
 
+# You may wish to disable the interface being brought down when stopping.
+# This is only of use for WakeOnLan.
+#ifdown_eth0="NO"
+
 ##############################################################################
 # OPTIONAL MODULES
 

etc.BSD/Makefile

@@ -1,10 +0,0 @@
-DIR=		${SYSCONFDIR}
-CONF=		rc rc.shutdown
-
-MK=		../mk
-include ${MK}/scripts.mk
-include Makefile.${OS}
-
-.SUFFIXES:	.in
-.in:
-	sed -e 's:@SHELL@:${SHELL}:' -e 's:@TERM@:${DEFTERM}:' $< > $@

etc.BSD/Makefile.FreeBSD

@@ -1 +0,0 @@
-DEFTERM=	cons25

etc.BSD/Makefile.NetBSD

@@ -1 +0,0 @@
-DEFTERM=	wsvt25

etc.FreeBSD/Makefile

@@ -1,6 +0,0 @@
-DIR=	/etc
-CONF=	devd.conf
-BIN=	rc.devd
-
-MK=	../mk
-include ${MK}/scripts.mk

etc.Linux/Makefile

@@ -1,5 +0,0 @@
-DIR=		${SYSCONFDIR}
-CONF_APPEND=	rc.conf
-
-MK=		../mk
-include ${MK}/scripts.mk

etc/.gitignore

@@ -1,2 +1,3 @@
+rc.conf
 rc
 rc.shutdown

etc/Makefile

@@ -2,4 +2,6 @@ DIR=	${SYSCONFDIR}
 CONF=	rc.conf
 
 MK=	../mk
+include ${MK}/os.mk
+include Makefile.${OS}
 include ${MK}/scripts.mk

etc/Makefile.FreeBSD

@@ -0,0 +1,4 @@
+SED_EXTRA=	-e 's:@TERM@:cons25:g'
+SRCS+=		rc.conf.in rc.in rc.shutdown.in
+CONF+=		devd.conf
+BIN+=		rc rc.shutdown rc.devd

etc/Makefile.Linux

@@ -0,0 +1,6 @@
+SED_EXTRA=	-e 's:@TERM@:wsvt25:g'
+SRCS+=		rc.in rc.shutdown.in
+
+rc.conf:
+	cp rc.conf.in rc.conf
+	cat rc.conf.Linux >> rc.conf

etc/Makefile.NetBSD

@@ -0,0 +1,3 @@
+SED_EXTRA=	-e 's:@TERM@:wsvt25:g'
+SRCS+=		rc.conf.in rc.in rc.shutdown.in
+BIN+=		rc rc.shutdown

init.d.BSD/.gitignore

@@ -1,10 +0,0 @@
-hostid
-moused
-newsyslog
-pf
-rarpd
-rc-enabled
-rpcbind
-savecore
-sysctl
-syslogd

init.d.BSD/Makefile

@@ -1,7 +0,0 @@
-DIR=	${INITDIR}
-SRCS=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-	rpcbind.in savecore.in sysctl.in syslogd.in
-BIN=	${OBJS}
-
-MK=	../mk
-include ${MK}/scripts.mk

init.d.FreeBSD/.gitignore

@@ -1,8 +0,0 @@
-clock
-devd
-dumpon
-ipfw
-mixer
-nscd
-powerd
-syscons

init.d.FreeBSD/Makefile

@@ -1,6 +0,0 @@
-DIR=	${INITDIR}
-SRCS=	clock.in devd.in dumpon.in ipfw.in mixer.in nscd.in powerd.in syscons.in
-BIN=	${OBJS}
-
-MK=	../mk
-include ${MK}/scripts.mk

init.d.Linux/.gitignore

@@ -1,8 +0,0 @@
-clock
-consolefont
-keymaps
-modules
-mtab
-numlock
-procfs
-sysctl

init.d.Linux/Makefile

@@ -1,7 +0,0 @@
-DIR=	${INITDIR}
-SRCS=	clock.in consolefont.in keymaps.in modules.in mtab.in numlock.in \
-	procfs.in sysctl.in
-BIN=${OBJS}
-
-MK=	../mk
-include ${MK}/scripts.mk

init.d.NetBSD/.gitignore

@@ -1,3 +0,0 @@
-swap-blk
-ttys
-wscons

init.d.NetBSD/Makefile

@@ -1,6 +0,0 @@
-DIR=	${INITDIR}	
-SRCS=	swap-blk.in ttys.in wscons.in
-BIN=	${OBJS}
-
-MK=	../mk
-include ${MK}/scripts.mk

init.d.misc/Makefile

@@ -3,5 +3,8 @@ SRCS=	avahi-dnsconfd.in avahid.in dbus.in hald.in named.in ntpd.in \
 	openvpn.in polkitd.in sshd.in
 
 MK=	../mk
+
+SED_EXTRA+= -e 's:@VARBASE@:/var:g'
+
 include ${MK}/scripts.mk
 include Makefile.${OS}

init.d.misc/dbus.in

@@ -3,7 +3,7 @@
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/bin/dbus-daemon
-pidfile=@VARBASE@/run/dbus/dbus.pid
+pidfile=@VARBASE@/run/dbus/pid
 command_args="${dbusd_args---system}"
 name="Message Bus Daemon"
 
@@ -15,5 +15,5 @@ depend()
 
 start_pre()
 {
-    mkdir -p $(dirname $pidfile)
+	mkdir -p $(dirname $pidfile)
 }

init.d.misc/dnsmasq.in

@@ -18,7 +18,7 @@ depend()
 
 reload()
 {
-	ebegin "Reloading ${SVCNAME}"
+	ebegin "Reloading ${RC_SVCNAME}"
 	start-stop-daemon --signal SIGHUP --pidfile "${pidfile}"
 	eend $?
 }

init.d.misc/named.in

@@ -4,12 +4,22 @@
 
 command=/usr/sbin/named
 command_args=${named_args}
-pidfile=@VARBASE@/run/named/pid
+pidfile=@VARBASE@/run/named.pid
 name="Domain Name server"
 extra_started_commands="reload"
 
 namedb=/etc/namedb
-named_uid=${named_uid:-bind}
+uid=named
+case "${RC_UNAME}" in
+	FreeBSD)
+		uid=bind
+		pidfile=@VARBASE@/run/named/pid
+		;;
+	Linux)
+		uid=bind
+		;;
+esac
+named_uid=${named_uid:-${uid}}
 
 depend()
 {
@@ -62,7 +72,7 @@ start_pre()
 		# Copy local timezone information if it is not up to date.
 		if [ -r /etc/localtime ]; then
 			cmp -s /etc/localtime "${named_chroot}/etc/localtime" ||
-		    	cp -p /etc/localtime "${named_chroot}/etc/localtime"
+			cp -p /etc/localtime "${named_chroot}/etc/localtime"
 		fi
 
 		command_args="${command_args} -t ${named_chroot}"
@@ -72,7 +82,7 @@ start_pre()
 
 	if [ ! -s "${named_chroot}${namedb}/rndc.conf" ]; then
 		local confgen="${command%/named}/rndc-confgen -a -b256 -u ${named_uid} \
-	    	-c ${named_chrootdir}/etc/namedb/rndc.key"
+			-c ${named_chrootdir}/etc/namedb/rndc.key"
 		if [ -s "${named_chroot}${namedb}/rndc.key" ]; then
 			local getuser="stat -f%Su"
 			[ "${RC_UNAME}" = "Linux" ] && getuser="stat -c%U"

init.d.misc/openvpn.in

@@ -2,12 +2,12 @@
 # Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
-vpn=${SVCNAME#*.}
+vpn=${RC_SVCNAME#*.}
 name="OpenVPN"
 [ "${vpn}" != "openvpn" ] && name="${name} (${vpn})"
 command=@PKG_PREFIX@/sbin/openvpn
 
-pidfile=@VARBASE@/run/"${SVCNAME}".pid
+pidfile=@VARBASE@/run/"${RC_SVCNAME}".pid
 openvpn_dir=${openvpn_dir:-@PKG_PREFIX@/etc/openvpn}
 openvpn_config=${openvpn_config:-${openvpn_dir}/${vpn}.conf}
 command_args="${openvpn_args} --daemon --config ${openvpn_config} --writepid ${pidfile}"

init.d/.gitignore

@@ -7,4 +7,35 @@ localmount
 netmount
 root
 swap
+sysctl
 urandom
+hostid
+moused
+newsyslog
+pf
+rarpd
+rc-enabled
+rpcbind
+savecore
+syslogd
+adjkerntz
+devd
+dumpon
+ipfw
+mixer
+nscd
+powerd
+syscons
+net.lo
+ttys
+swap-blk
+wscons
+consolefont
+hwclock
+keymaps
+modules
+mtab
+numlock
+procfs
+termencoding
+devdb

init.d/Makefile

@@ -1,7 +1,16 @@
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in halt.sh.in hostname.in local.in localmount.in \
-	netmount.in root.in swap.in urandom.in
+	netmount.in root.in swap.in sysctl.in urandom.in
 BIN=	${OBJS}
 
+INSTALLAFTER=	_installafter
+CLEANFILES+=	net.lo
+TARGETS+=	net.lo
+
 MK=	../mk
+include ${MK}/os.mk
+include Makefile.${OS}
 include ${MK}/scripts.mk
+
+_installafter: realinstall
+	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO}

init.d/Makefile.FreeBSD

@@ -0,0 +1,13 @@
+NET_LO=	net.lo0
+
+# Generic BSD scripts
+SRCS+=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
+	rpcbind.in savecore.in syslogd.in
+
+# These are FreeBSD specific
+SRCS+=	adjkerntz.in devd.in dumpon.in ipfw.in mixer.in nscd.in \
+	powerd.in syscons.in
+
+.SUFFIXES:	.BSD.in
+.BSD.in:
+	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/Makefile.Linux

@@ -0,0 +1,8 @@
+NET_LO=	net.lo
+
+SRCS+=	hwclock.in consolefont.in keymaps.in modules.in mtab.in numlock.in \
+	procfs.in termencoding.in
+
+.SUFFIXES:	.Linux.in
+.Linux.in:
+	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/Makefile.NetBSD

@@ -0,0 +1,12 @@
+NET_LO=	net.lo0
+
+# Generic BSD scripts
+SRCS+=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
+	rpcbind.in savecore.in syslogd.in
+
+# These are NetBSD specific
+SRCS+=	devdb.in swap-blk.in ttys.in wscons.in
+
+.SUFFIXES:	.BSD.in
+.BSD.in:
+	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/adjkerntz.in

@@ -16,6 +16,7 @@ fi
 
 depend()
 {
+	provide clock
 	# BSD adjkerntz needs to be able to write to /etc
 	if [ "${clock}" = "UTC" -a -e /etc/wall_cmos_clock ] ||
 	   [ "${clock}" != "UTC" -a ! -e /etc/wall_cmos_clock ]; then
@@ -46,7 +47,7 @@ save()
 
 stop()
 {
-    # Don't tweak the hardware clock on LiveCD halt.
+	# Don't tweak the hardware clock on LiveCD halt.
 	if yesno "${clock_systohc:-${CLOCK_SYSTOHC}}"; then
 	   [ -z "${CDBOOT}" ] && save
 	fi

init.d/bootmisc.in

@@ -11,40 +11,45 @@ depend()
 	keyword noprefix
 }
 
+dir_writeable()
+{
+	mkdir "$1"/.test.$$ 2>/dev/null && rmdir "$1"/.test.$$
+}
+
 cleanup_tmp_dir()
 {
-	local dir=$1
+	local dir="$1"
 
-	mkdir -p "${dir}"
+	if ! [ -d "${dir}" ]; then
+		mkdir -p "${dir}" || return $?
+	fi
+	dir_writeable "${dir}" || return 1
+	chmod +t "${dir}"
 	cd "${dir}"
 	if yesno ${wipe_tmp:-${WIPE_TMP:-yes}}; then
 		ebegin "Wiping ${dir} directory"
-		local startopts="-x . -depth" delete="-exec rm -rf -- {} ;"
-
-		if [ "${RC_UNAME}" = "Linux" ]; then
-			startopts=". -xdev -depth"
-			# busybox find / rm cannot handle --
-			delete="-delete"
-		fi
+		local startopts="-x . -depth"
+		[ "${RC_UNAME}" = "Linux" ] && startopts=". -xdev -depth"
 
 		# Faster than find
 		rm -rf -- [b-ikm-pr-zA-Z0-9\.]*
 
 		find ${startopts} ! -name . \
-			! -path ./lost+found \
+			! -path "./lost+found" \
 			! -path "./lost+found/*" \
-			! -path ./quota.user \
+			! -path "./quota.user" \
 			! -path "./quota.user/*" \
-			! -path ./aquota.user \
+			! -path "./aquota.user" \
 			! -path "./aquota.user/*" \
-			! -path ./quota.group \
+			! -path "./quota.group" \
 			! -path "./quota.group/*" \
-			! -path ./aquota.group \
+			! -path "./aquota.group" \
 			! -path "./aquota.group/*" \
-			! -path ./journal \
+			! -path "./journal" \
 			! -path "./journal/*" \
-			${delete} \
-			-type d -prune
+			! -path "./.private" \
+			! -path "./.private/*" \
+			-exec rm -rf {} \;
 		eend 0
 	else
 		ebegin "Cleaning ${dir} directory"
@@ -58,12 +63,7 @@ cleanup_tmp_dir()
 
 start()
 {
-	if ! mkdir /.test.$$ 2>/dev/null; then
-		ewarn "Skipping /var and /tmp initialization (ro root?)"
-		return 0
-	fi
-	rmdir /.test.$$
-
+	local logw=false
 	# Ensure that our basic dirs exist
 	for x in /var/log /var/run /tmp; do
 		if ! [ -d "${x}" ]; then
@@ -74,57 +74,66 @@ start()
 		fi 
 	done
 
-	ebegin "Creating user login records"
-	cp /dev/null /var/run/utmp
-	[ -e /var/log/wtmp ] || cp /dev/null /var/log/wtmp
-	chmod 0644 /var/run/utmp /var/log/wtmp
-	eend 0
+	if dir_writeable /var/run; then
+		ebegin "Creating user login records"
+		cp /dev/null /var/run/utmp
+		if dir_writeable /var/log; then
+			logw=true
+			[ -e /var/log/wtmp ] || cp /dev/null /var/log/wtmp
+			chmod 0644 /var/run/utmp /var/log/wtmp
+		fi
+		eend 0
 
-	ebegin "Cleaning /var/run"
-	for x in $(find /var/run ! -type d ! -name utmp ! -name random-seed \
-		   ! -name ld-elf.so.hints ! -name ld.so.hints);
-	do	
-		[ ! -f "${x}" ] && continue
-		# Do not remove pidfiles of already running daemons
-		case "${x}" in
-			*.pid)
-				start-stop-daemon --test --quiet --stop \
-				--pidfile "${x}"
-				[ $? -eq 0 ] && continue
+		ebegin "Cleaning /var/run"
+		for x in $(find /var/run ! -type d ! -name utmp \
+			! -name random-seed ! -name dev.db \
+			! -name ld-elf.so.hints ! -name ld.so.hints);
+		do	
+			[ ! -f "${x}" ] && continue
+			# Do not remove pidfiles of already running daemons
+			case "${x}" in
+				*.pid)
+					start-stop-daemon --test --quiet \
+					--stop --pidfile "${x}" && continue
 				;;
-		esac
-		rm -f -- "${x}"
-	done
-	eend 0
+			esac
+			rm -f -- "${x}"
+		done
+		eend 0
+	fi
 
 	# Clean up /tmp directories
 	local tmp=
 	for tmp in ${wipe_tmp_dirs-/tmp}; do
 		cleanup_tmp_dir "${tmp}"
 	done
-	chmod +t /tmp /var/tmp
 
-	# Make sure our X11 stuff have the correct permissions
-	# Omit the chown as bootmisc is run before network is up
-	# and users may be using lame LDAP auth #139411
-	rm -rf /tmp/.ICE-unix /tmp/.X11-unix 
-	mkdir -p /tmp/.ICE-unix /tmp/.X11-unix
-	chmod 1777 /tmp/.ICE-unix /tmp/.X11-unix
-	[ -x /sbin/restorecon ] && restorecon /tmp/.ICE-unix /tmp/.X11-unix
+	if dir_writeable /tmp; then
+		# Make sure our X11 stuff have the correct permissions
+		# Omit the chown as bootmisc is run before network is up
+		# and users may be using lame LDAP auth #139411
+		rm -rf /tmp/.ICE-unix /tmp/.X11-unix 
+		mkdir -p /tmp/.ICE-unix /tmp/.X11-unix
+		chmod 1777 /tmp/.ICE-unix /tmp/.X11-unix
+		[ -x /sbin/restorecon ] && restorecon /tmp/.ICE-unix /tmp/.X11-unix
+	fi
 
-	# Create an 'after-boot' dmesg log
-	if [ "${RC_SYS}" != "VSERVER" -a "${RC_SYS}" != "OPENVZ" ]; then
-		dmesg > /var/log/dmesg
-		chmod 640 /var/log/dmesg
+	if ${logw} || dir_writeable /var/log; then
+		# Create an 'after-boot' dmesg log
+		if [ "${RC_SYS}" != "VSERVER" -a "${RC_SYS}" != "OPENVZ" ]; then
+			dmesg > /var/log/dmesg
+			chmod 640 /var/log/dmesg
+		fi
 	fi
 
 	rm -f /etc/nologin
+	return 0
 }
 
 stop()
 {
 	# Write a halt record if we're shutting down
-	case "${RC_SOFTLEVEL}" in
+	case "${RC_RUNLEVEL}" in
 		reboot|shutdown) [ "${RC_UNAME}" = "Linux" ] && halt -w;;
 	esac
 

init.d/consolefont.in

@@ -6,8 +6,7 @@ description="Sets a font for the consoles."
 
 depend()
 {
-	need localmount
-	need keymaps    # sets up terminal encoding scheme
+	need localmount termencoding
 	after hotplug
 	keyword noopenvz noprefix nouml novserver noxenu
 }
@@ -34,7 +33,7 @@ start()
 		return 0
 	fi
 
-	local x= param= sf_param= retval=0 ttydev=
+	local x= param= sf_param= retval=0 ttydev=/dev/tty
 
 	# Get additional parameters
 	if [ -n "${consoletranslation}" ]; then
@@ -45,11 +44,8 @@ start()
 	fi
 
 	# Set the console font
-	ebegin "Setting user font"
-	[ -d /dev/vc ] \
-		&& ttydev=/dev/vc/ \
-		|| ttydev=/dev/tty
-
+	ebegin "Setting console font [${consolefont}]"
+	[ -d /dev/vc ] && ttydev=/dev/vc/
 	x=1
 	while [ ${x} -le ${ttyn} ]; do
 		setfont ${consolefont} ${param} -C ${ttydev}${x} >/dev/null 
@@ -61,17 +57,17 @@ start()
 	# Store the last font so we can use it ASAP on boot
 	if [ ${retval} -eq 0 -a -w "${RC_LIBDIR}" ]; then
 		mkdir -p "${RC_LIBDIR}"/console
-
 		for font in /usr/share/consolefonts/"${consolefont}".*; do
 			:
-	     	done
+		done
 		cp "${font}" "${RC_LIBDIR}"/console
 		echo "${font##*/}" > "${RC_LIBDIR}"/console/font
 		if yesno ${unicode:-${UNICODE}}; then
-			cp /dev/null "${RC_LIBDIR}"/console/unicode
+			echo "" > "${RC_LIBDIR}"/console/unicode
 		else
 			rm -f "${RC_LIBDIR}"/console/unicode
 		fi
+
 	fi
 
 	return ${retval}

init.d/devd.in

@@ -14,9 +14,9 @@ depend() {
 }
 
 start_pre() {
-    sysctl hw.bus.devctl_disable=0 >/dev/null
+	sysctl hw.bus.devctl_disable=0 >/dev/null
 }
 
 stop_post() {
-    sysctl hw.bus.devctl_disable=1 >/dev/null
+	sysctl hw.bus.devctl_disable=1 >/dev/null
 }

init.d/devdb.in

@@ -0,0 +1,21 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Creates the dev database"
+
+depend()
+{
+	need localmount
+}
+
+start()
+{
+	ebegin "Bulding the dev database"
+	if [ /var/run/dev.db -nt /dev ]; then
+		:
+	else
+		dev_mkdb
+	fi
+	eend $?
+}

init.d/fsck.in

@@ -3,7 +3,7 @@
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Check and repair filesystems according to /etc/fstab"
-_ISF="
+_IFS="
 "
 
 depend()
@@ -19,7 +19,7 @@ _abort() {
 
 # We should only reboot when first booting
 _reboot() {
-	if [ "${RC_SOFTLEVEL}" = "${RC_BOOTLEVEL}" ]; then
+	if [ "${RC_RUNLEVEL}" = "${RC_BOOTLEVEL}" ]; then
 		reboot "$@"
 		_abort || return 1
 	fi
@@ -27,20 +27,32 @@ _reboot() {
 
 start()
 {
-	local reboot_opts= fsck_opts= p=
+	local reboot_opts= fsck_opts= p= check_extra=
 
-	ebegin "Checking local filesystems"
+	if [ -e /fastboot ]; then
+		ewarn "Skipping fsck due to /fastboot"
+		return 0
+	fi
+	if [ -e /forcefsck ]; then
+		fsck_opts="${fsck_opts} -f"
+		check_extra="(check forced)"
+	fi
+
+	if [ -n "${fsck_passno}" ]; then
+		check_extra="[passno ${fsck_passno}] ${check_extra}"
+	fi
+	ebegin "Checking local filesystems ${check_extra}"
 	for p in ${fsck_passno}; do
 		local IFS="${_IFS}"
 		case "${p}" in
 			[0-9]*) p="=${p}";;
 		esac
-		set -- "$@" "$(fstabinfo --passno "${p}")"
+		set -- "$@" $(fstabinfo --passno "${p}")
 		unset IFS
 	done
 
 	if [ "${RC_UNAME}" = "Linux" ]; then
-		fsck_opts="-C0 -T"
+		fsck_opts="${fsck_opts} -C0 -T"
 		if [ -z "${fsck_passno}" ]; then
 			fsck_args=${fsck_args--A -p}
 			if echo 2>/dev/null >/.test.$$; then
@@ -51,7 +63,7 @@ start()
 		reboot_opts="-f"
 	fi
 
-	trap : QUIT
+	trap : INT QUIT
 	fsck ${fsck_args--p} ${fsck_opts} "$@"
 	case $? in
 		0)       eend 0; return 0;;

init.d/halt.sh.in

@@ -28,6 +28,7 @@ sync; sync
 #   1) we don't need (and by default can't) umount anything (VServer) or
 #   2) the host utils take care of all umounting stuff (OpenVZ)
 if [ "${RC_SYS}" = "VSERVER" -o "${RC_SYS}" = "OPENVZ" ]; then
+	[ "${RC_SYS}" = "OPENVZ" -a "$1" = "reboot" ] && echo "" > /reboot
 	if [ -e @SYSCONFDIR@/init.d/"$1".sh ]; then
 		. @SYSCONFDIR@/init.d/"$1".sh
 	else

init.d/hwclock.in

@@ -23,6 +23,7 @@ fi
 
 depend()
 {
+	provide clock
 	if yesno ${clock_adjfile}; then
 		use root
 	else

init.d/ipfw.in

@@ -87,7 +87,7 @@ start() {
 	# Only IPs and nets in firewall_allowservices is allowed in.
 	for i in ${ipfw_ip_in}; do
 		for p in ${ipfw_ports_in}; do
-	    	ipfw add pass tcp from ${i} to me ${p}
+			ipfw add pass tcp from ${i} to me ${p}
 		done
 	done
 

init.d/keymaps.in

@@ -8,13 +8,13 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 unicode=${unicode:-${UNICODE}}
 keymap=${keymap:-${KEYMAP}}
 extended_keymaps=${extended_keymaps:-${EXTENDED_KEYMAPS}}
-windowskeys=${windowskeys:-${SET_WINDOWSKEYS}} 
+windowkeys=${windowkeys:-${SET_WINDOWSKEYS}} 
 fix_euro=${fix_euro:-${FIX_EURO}}
 dumpkeys_charset=${dumpkeys_charset:-${DUMPKEYS_CHARSET}}
 
 depend()
 {
-	need localmount
+	need localmount termencoding
 	keyword noopenvz noprefix nouml novserver noxenu
 }
 
@@ -25,43 +25,41 @@ start()
 		return 1
 	fi
 
-	local ttydev= n=
-	[ -d /dev/vc ] \
-		&& ttydev=/dev/vc/ \
-		|| ttydev=/dev/tty
+	local ttydev=/dev/tty n=
+	[ -d /dev/vc ] && ttydev=/dev/vc/
 
 	# Force linux keycodes for PPC.
 	if [ -f /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes ]; then
 		echo 1 > /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
 	fi
 
-	ebegin "Loading key mappings"
-	local loadkeys_uni= wkeys= 
-	yesno ${unicode} && loadkeys_uni="--unicode"
-	yesno ${windowskeys} && wkeys="windowkeys"
+	ebegin "Loading key mappings [${keymap}]"
+	local loadkeys_uni= wkeys= kmode="-a" msg="ASCII"
+	if yesno ${unicode}; then
+		loadkeys_uni="--unicode"
+		kmode="-u"
+		msg="UTF-8"
+	fi
+	yesno ${windowkeys} && wkeys="windowkeys"
 	loadkeys -q ${loadkeys_uni} ${wkeys} ${keymap} ${extended_keymaps} 
 	eend $? "Error loading key mappings" || return $?
 
 	if yesno ${fix_euro}; then
+		ebegin "Fixing font for euro symbol"
 		# Fix some fonts displaying the Euro, #173528.
 		echo "altgr keycode 18 = U+20AC" | loadkeys -q
+		eend $?
 	fi
 
 	# Set terminal encoding to either ASCII or UNICODE.
 	# See utf-8(7) for more information.
-	local termencoding="%@" termmsg="ASCII" kmode="-a"
+	ebegin "Setting keyboard mode [${msg}]"
 	if yesno ${unicode}; then
 		dumpkeys ${dumpkeys_charset:+-c} \
 			${dumpkeys_charset} | loadkeys --unicode
-		termencoding="%G"
-		termmsg="UTF-8"
-		kmode="-u"
 	fi
-
-	ebegin "Setting terminal encoding to" ${termmsg}
 	n=1
 	while [ ${n} -le "${ttyn}" ]; do
-		printf "\033%s" "${termencoding}" >"${ttydev}${n}"
 		kbd_mode "${kmode}" -C "${ttydev}${n}"
 		n=$((${n} + 1))
 	done

init.d/modules.in

@@ -23,7 +23,7 @@ start()
 	x=${KV#*.*.}
 	local KV_MICRO=${x%%-*}
 
-	local list= x= args= cnt=0
+	local list= x= xx= y= args= cnt=0
 	for x in "${KV}" \
 		${KV_MAJOR}.${KV_MINOR}.${KV_MICRO} \
 		${KV_MAJOR}.${KV_MINOR} \
@@ -35,7 +35,15 @@ start()
 
 	for x in ${list}; do
 		ebegin "Loading module ${x}"
-		eval args=\$module_$(shell_var "${x}")_args
+		xx=$(shell_var "${x}")
+		for y in "${KV}" \
+			${KV_MAJOR}.${KV_MINOR}.${KV_MICRO} \
+			${KV_MAJOR}.${KV_MINOR} \
+		; do
+			eval args=\$module_${xx}_args_$(shell_var "${y}")
+			[ -n "${args}" ] && break
+		done
+		[ -z "${args}" ] && eval args=\$module_${xx}_args
 		eval modprobe -q "${x}" "${args}"
 		eend $? "Failed to load ${x}" && cnt=$((${cnt} + 1))
 	done

init.d/moused.in

@@ -2,7 +2,7 @@
 # Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
-mouse=${SVCNAME##*.}
+mouse=${RC_SVCNAME##*.}
 if [ -n "${name}" -a "${mouse}" != "moused" ]; then
 	moused_device=/dev/"${mouse}"
 	pidfile=/var/run/moused-"${mouse}".pid

init.d/net.lo.in

@@ -15,7 +15,7 @@ __IFS="
 "
 depend()
 {
-	local IFACE=${SVCNAME#*.}
+	local IFACE=${RC_SVCNAME#*.}
 	local IFVAR=$(shell_var "${IFACE}")
 
 	need localmount
@@ -28,7 +28,7 @@ depend()
 		*) after net.lo net.lo0;;
 	esac
 
-	if type depend_${IFVAR} >/dev/null 2>&1; then
+	if [ "$(command -v "depend_${IFVAR}")" = "depend_${IFVAR}" ]; then
 		depend_${IFVAR}
 	fi
 
@@ -335,7 +335,7 @@ _load_modules()
 
 		# Now load and wrap our functions
 		if ! . "${MODULESDIR}/${mod}.sh"; then
-			eend 1 "${SVCNAME}: error loading module \`${mod}'"
+			eend 1 "${RC_SVCNAME}: error loading module \`${mod}'"
 			exit 1
 		fi
 
@@ -344,7 +344,7 @@ _load_modules()
 		# Wrap our provides
 		local f=
 		for f in pre_start start post_start; do 
-			eval "${provides}_${f}() { type ${mod}_${f} >/dev/null 2>&1 || return 0; ${mod}_${f} \"\$@\"; }"
+			eval "${provides}_${f}() { [ "$(command -v "${mod}_${f}")" = "${mod}_${f}" ] || return 0; ${mod}_${f} \"\$@\"; }"
 		done
 
 		eval module_${mod}_provides="${provides}"
@@ -358,7 +358,7 @@ _load_modules()
 			eval x=\$module_${mod}_provides
 			[ -z "${x}" ] && continue
 			for f in pre_start start post_start; do 
-				eval "${x}_${f}() { type ${mod}_${f} >/dev/null 2>&1 || return 0; ${mod}_${f} \"\$@\"; }"
+				eval "${x}_${f}() { [ "$(command -v "${mod}_${f}")" = "${mod}_${f}" ] || return 0; ${mod}_${f} \"\$@\"; }"
 			done
 			eval module_${x}_providedby="${mod}"
 			;;
@@ -447,7 +447,7 @@ _load_config()
 
 start()
 {
-	local IFACE=${SVCNAME#*.} oneworked=false module=
+	local IFACE=${RC_SVCNAME#*.} oneworked=false module=
 	local IFVAR=$(shell_var "${IFACE}") cmd= our_metric=
 	local metric=0
 
@@ -462,7 +462,7 @@ start()
 	# We up the iface twice if we have a preup to ensure it's up if
 	# available in preup and afterwards incase the user inadvertently
 	# brings it down
-	if type preup >/dev/null 2>&1; then
+	if [ "$(command -v preup)" = "preup" ]; then
 		_up 2>/dev/null
 		ebegin "Running preup"
 		eindent
@@ -473,7 +473,7 @@ start()
 	_up 2>/dev/null
 	
 	for module in ${MODULES}; do
-		if type "${module}_pre_start" >/dev/null 2>&1; then
+		if [ "$(command -v "${module}_pre_start")" = "${module}_pre_start" ]; then
 			${module}_pre_start || exit $?
 		fi
 	done
@@ -487,7 +487,7 @@ start()
 	if ! _wait_for_carrier; then
 		if service_started devd; then
 			ewarn "no carrier, but devd will start us when we have one"
-			mark_service_inactive "${SVCNAME}"
+			mark_service_inactive "${RC_SVCNAME}"
 		else
 			eerror "no carrier"
 		fi
@@ -522,7 +522,7 @@ start()
 			null) :;;
 			[0-9]*|*:*) _add_address ${config};;
 			*)
-				if type "${config}_start" >/dev/null 2>&1; then
+				if [ "$(command -v "${config}_start")" = "${config}_start" ]; then
 					"${config}"_start
 				else
 					eerror "nothing provides \`${config}'"
@@ -547,7 +547,7 @@ start()
 	done
 
 	if ! ${oneworked}; then
-		if type failup >/dev/null 2>&1; then
+		if [ "$(command -v failup)" = "failup" ]; then
 			ebegin "Running failup"
 			eindent
 			failup
@@ -600,12 +600,12 @@ ${routes}"
 	fi
 
 	for module in ${MODULES}; do
-		if type "${module}_post_start" >/dev/null 2>&1; then
+		if [ "$(command -v "${module}_post_start")" = "${module}_post_start" ]; then
 			${module}_post_start || exit $?
 		fi
 	done
 
-	if type postup >/dev/null 2>&1; then
+	if [ "$(command -v postup)" = "postup" ]; then
 		ebegin "Running postup"
 		eindent
 		postup 
@@ -617,7 +617,7 @@ ${routes}"
 
 stop()
 {
-	local IFACE=${SVCNAME#*.} module=
+	local IFACE=${RC_SVCNAME#*.} module=
 	local IFVAR=$(shell_var "${IFACE}") opts=
 
 	einfo "Bringing down interface ${IFACE}"
@@ -628,7 +628,7 @@ stop()
 		_load_modules false
 	fi
 
-	if type predown >/dev/null 2>&1; then
+	if [ "$(command -v predown)" = "predown" ]; then
 		ebegin "Running predown"
 		eindent
 		predown || return 1
@@ -641,35 +641,40 @@ stop()
 	fi
 
 	for module in ${MODULES}; do
-		if type "${module}_pre_stop" >/dev/null 2>&1; then
+		if [ "$(command -v "${module}_pre_stop")" = "${module}_pre_stop" ]; then
 			${module}_pre_stop || exit $?
 		fi
 	done
 
 	for module in ${MODULES}; do
-		if type "${module}_stop" >/dev/null 2>&1; then
+		if [ "$(command -v "${module}_stop")" = "${module}_stop" ]; then
 			${module}_stop
 		fi
 	done
 
 	# Only delete addresses for non PPP interfaces
-	if ! type is_ppp >/dev/null 2>&1 || ! is_ppp; then
+	if ! [ "$(command -v is_ppp)" = "is_ppp" ] || ! is_ppp; then
 		_delete_addresses "${IFACE}"
 	fi
 
 	for module in ${MODULES}; do
-		if type "${module}_post_stop" >/dev/null 2>&1; then
+		if [ "$(command -v "${module}_post_stop")" = "${module}_post_stop" ]; then
 			${module}_post_stop
 		fi
 	done
 
-	! yesno ${IN_BACKGROUND} && \
-	[ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ] && \
-	_down 2>/dev/null
+	# If not in background, and not loopback then bring the interface down
+	# unless overridden.
+	if ! yesno ${IN_BACKGROUND} && \
+	[ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
+		eval module=\$ifdown_${IFVAR}
+		module=${module:-YES}
+		yesno ${module} && _down 2>/dev/null
+	fi
 
 	type resolvconf >/dev/null 2>&1 && resolvconf -d "${IFACE}" 2>/dev/null
 
-	if type postdown >/dev/null 2>&1; then
+	if [ "$(command -v "postdown")" = "postdown" ]; then
 		ebegin "Running postdown"
 		eindent
 		postdown

init.d/netmount.in

@@ -23,17 +23,18 @@ depend()
 {
 	# Only have portmap as a dependency if there is a nfs mount in fstab
 	# that is set to mount at boot
-	local pmap=""
+	local pmap=
 	if need_portmap; then
-		pmap="${pmap} rpc.statd"
+		pmap="rpc.statd"
 		[ -x @SYSCONFDIR@/init.d/rpcbind ] \
-			&& pmap="rpcbind" \
-			|| pmap="portmap"
+			&& pmap="${pmap} rpcbind" \
+			|| pmap="${pmap} portmap"
 	fi
 
 	config /etc/fstab
 	need net ${pmap}
-	use afc-client amd autofs dns nfs nfsmount portmap rpcbind rpc.statd
+	use afc-client amd autofs openvpn
+	use dns nfs nfsmount portmap rpcbind rpc.statd
 	keyword nojail noopenvz noprefix novserver
 }
 
@@ -46,14 +47,14 @@ start()
 	for x in ${net_fs_list}; do
 		case "${x}" in
 			nfs|nfs4)
-    			# If the nfsmount script took care of the nfs
+			# If the nfsmount script took care of the nfs
 			# filesystems, then there's no point in trying
 			# them twice
 			service_started nfsmount && continue
 
-        		# Only try to mount NFS filesystems if portmap was
+			# Only try to mount NFS filesystems if portmap was
 			# started. This is to fix "hang" problems for new
-		        # users who do not add portmap to the default runlevel.
+			# users who do not add portmap to the default runlevel.
 			if need_portmap && ! service_started "${pmap}"; then
 				continue
 			fi

init.d/procfs.in

@@ -26,7 +26,7 @@ start()
 		local usbfs=$(grep -Fow usbfs /proc/filesystems ||
 					  grep -Fow usbdevfs /proc/filesystems)
 		if [ -n "${usbfs}" ]; then
-			ebegin "Mounting USB device filesystem (${usbfs})"
+			ebegin "Mounting USB device filesystem [${usbfs}]"
 			local usbgid="$(getent group usb | \
 				sed -e 's/.*:.*:\(.*\):.*/\1/')"
 			mount -t ${usbfs} \

init.d/rc-enabled.in

@@ -24,9 +24,7 @@ start()
 		done
 
 		# If we have an init script for this service, continue
-		[ -x @SYSCONFDIR@/init.d/"${service}" ] && continue
-		[ -x @PKG_PREFIX@/@SYSCONFDIR@/init.d/"${service}" ] && continue
-		[ -x @LOCAL_PREFIX@/@SYSCONFDIR@/init.d/"${service}" ] && continue
+		rc-service --exists "${service}" && continue
 
 		# Ensure that the users rc.conf will start us - ignore the defaults
 		eval enabled=\$${svc##*/}_enable

init.d/root.in

@@ -13,7 +13,7 @@ depend()
 start()
 {
 	if echo 2>/dev/null >/.test.$$; then
-		rm -f /.test.$$
+		rm -f /.test.$$ /fastboot /forcefsck
 		return 0
 	fi
 
@@ -22,5 +22,7 @@ start()
 		Linux)	mount -n -o remount,rw /;;
 		*)	mount -u -o rw /;;
 	esac
-	eend $? "Root filesystem could not be mounted read/write"
+	if eend $? "Root filesystem could not be mounted read/write"; then
+		rm -f /fastboot /forcefsck
+	fi
 }

init.d/syscons.in

@@ -49,10 +49,10 @@ start() {
 
 	local v= f=
 	for v in font8x16 font8x14 font8x8; do
-		f=$(eval \$"${v}")
+		eval f=\$${v}
 		if [ -n "${f}" ]; then
 			ebegin "Setting font ${f}"
-			vidcontrol -f ${v##FONT} ${f}
+			vidcontrol -f ${v##font} ${f}
 			eend $?
 		fi
 	done

init.d/sysctl.BSD.in

@@ -12,9 +12,8 @@ depend()
 start()
 {
 	[ -e /etc/sysctl.conf ] || return 0
-	
-	ebegin "Configuring kernel parameters"
 	local retval=0 var= comments=
+	ebegin "Configuring kernel parameters"
 	while read var comments; do
 		case "${var}" in
 			""|"#"*) continue;;
@@ -22,5 +21,4 @@ start()
 		sysctl -w "${var}" >/dev/null || retval=1
 	done < /etc/sysctl.conf
 	eend ${retval} "Some errors were encountered"
-	eend $?
 }

init.d/sysctl.Linux.in

@@ -13,6 +13,6 @@ start()
 {
 	[ -e /etc/sysctl.conf ] || return 0
 	ebegin "Configuring kernel parameters"
-	sysctl -p /etc/sysctl.conf >/dev/null
-	eend $?
+	sysctl -p >/dev/null
+	eend $? "Some errors were encountered"
 }

init.d/termencoding.in

@@ -0,0 +1,35 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Configures terminal encoding."
+
+ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
+unicode=${unicode:-${UNICODE}}
+
+depend()
+{
+	keyword noopenvz noprefix nouml novserver noxenu
+}
+
+start()
+{
+	local ttydev=/dev/tty n=
+	[ -d /dev/vc ] && ttydev=/dev/vc/
+
+	# Set terminal encoding to either ASCII or UNICODE.
+	# See utf-8(7) for more information.
+	local termencoding="%@" termmsg="ASCII"
+	if yesno ${unicode}; then
+		termencoding="%G"
+		termmsg="UTF-8"
+	fi
+
+	ebegin "Setting terminal encoding [${termmsg}]"
+	n=1
+	while [ ${n} -le "${ttyn}" ]; do
+		printf "\033%s" "${termencoding}" >"${ttydev}${n}"
+		n=$((${n} + 1))
+	done
+	eend 0
+}

init.d/wscons.in

@@ -61,15 +61,15 @@ start()
 			mapfile)
 				local entry=
 				while read entry; do
-				    case "${entry}" in
+					case "${entry}" in
 					\#*|"")
-					    continue
-					    ;;
+						continue
+						;;
 					*)
-					    cmd="${wsctl} -w \"map+=${entry}\""
-					    eval "${cmd} >/dev/null"
-					    ;;
-				    esac
+						cmd="${wsctl} -w \"map+=${entry}\""
+						eval "${cmd} >/dev/null"
+						;;
+					esac
 				done < "${arg1}"
 				;;
 

man/Makefile

@@ -1,7 +1,8 @@
 MAN3=		einfo.3 \
 		rc_config.3 rc_deptree.3 rc_find_pids.3 rc_plugin_hook.3 \
-		rc_runlevel.3 rc_service.3 rc_strcatpaths.3 rc_strlist.3
-MAN8=		rc-status.8 rc-update.8 rc.8 runscript.8 start-stop-daemon.8
+		rc_runlevel.3 rc_service.3 rc_stringlist.3
+MAN8=		rc-service.8 rc-status.8 rc-update.8 rc.8 runscript.8 \
+		start-stop-daemon.8
 
 # Handy macro to create symlinks
 # This does rely on correctly formatting our manpages!
@@ -11,7 +12,7 @@ MAKE_LINKS=	suffix=$${man\#*.}; \
 		-n -e '/^\.Sh NAME$$/,/\.Sh/ s/\.Nm //p' $${man}`; do \
 		if test "$${link}" != "$${prefix}" ; then \
 		ln -sf $${man} \
-		${DESTDIR}/${MANDIR}$${suffix}/$${link}.$${suffix} ; \
+		${DESTDIR}/${MANDIR}/man$${suffix}/$${link}.$${suffix} ; \
 		fi; \
 		done;
 
@@ -22,15 +23,17 @@ include ${MK}/gitignore.mk
 all:
 
 install:
-	${INSTALL} -d ${DESTDIR}/${MANDIR}3
+	${INSTALL} -d ${DESTDIR}/${MANDIR}/man3
 	for man in ${MAN3}; do \
-		${INSTALL} -m ${MANMODE} "$$man" ${DESTDIR}/${MANDIR}3 || exit $$?; \
+		${INSTALL} -m ${MANMODE} "$$man" ${DESTDIR}/${MANDIR}/man3 || exit $$?; \
 		${MAKE_LINKS} \
 	done	
-	${INSTALL} -d ${DESTDIR}/${MANDIR}8
+	${INSTALL} -d ${DESTDIR}/${MANDIR}/man8
 	for man in ${MAN8}; do \
-		${INSTALL} -m ${MANMODE} "$$man" ${DESTDIR}/${MANDIR}8 || exit $$?; \
+		${INSTALL} -m ${MANMODE} "$$man" ${DESTDIR}/${MANDIR}/man8 || exit $$?; \
 		${MAKE_LINKS} \
 	done
 
+check test::
+
 clean: