Revert "Make einfo routines private"

This reverts commit de88aff0a8.

Makefile

@@ -6,11 +6,6 @@ include Makefile.inc
 
 SUBDIR=		conf.d etc init.d local.d man scripts sh src sysctl.d
 
-# Build our old net foo or not
-ifeq (${MKNET},oldnet)
-SUBDIR+=	net doc
-endif
-
 # Build pkgconfig or not
 MKPKGCONFIG?=	yes
 ifeq (${MKPKGCONFIG},yes)

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.11.1
+VERSION=	0.12.1
 PKG=		${NAME}-${VERSION}

README

@@ -10,7 +10,7 @@ You may wish to tweak the installation with the below arguments
 PROGLDFLAGS=-static
 LIBNAME=lib64
 DESTDIR=/tmp/openrc-image
-MKNET=oldnet
+MKNET=no
 MKPAM=pam
 MKPREFIX=yes
 MKPKGCONFIG=no
@@ -18,6 +18,7 @@ MKSELINUX=yes
 MKSTATICLIBS=no
 MKTERMCAP=ncurses
 MKTERMCAP=termcap
+MKTOOLS=yes
 PKG_PREFIX=/usr/pkg
 LOCAL_PREFIX=/usr/local
 PREFIX=/usr/local
@@ -56,6 +57,9 @@ init.d.misc is not installed by default as the scripts will need
 tweaking on a per distro basis. They are also non essential to the operation
 of the system.
 
+As of OpenRC-0.12, the net.* scripts, originally from Gentoo Linux, have
+been removed. If you need these scripts, look for a package called
+netifrc, which is maintained by them.
 
 Reporting Bugs
 --------------

README.busybox

@@ -0,0 +1,28 @@
+Using Busybox as your Default Shell
+-----------------------------------
+
+
+If you have/bin/sh linked to busybox, you need to be aware of several
+incompatibilities between busybox's applets and the standalone
+counterparts. Since it is possible to configure busybox to not include
+these applets or to prefer the standalone counterparts, OpenRC does not
+attempt to support the busybox applets.
+
+All of these apply to busybox 1.20.2, which is the current version of
+busybox as of this writing.
+
+1. The start-stop-daemon applet is not compatible with start-stop-daemon
+in OpenRC. Please make sure CONFIG_START_STOP_DAEMON is not set to y in
+the configuration file you use to build busybox.
+
+2. The -O option for the mount applet does not support the [no]_netdev
+options from util-linux for handling network file systems.
+
+3. The umount applet does not support the -O option from util-linux.
+
+4. The swapon applet does not support the -e option from util-linux.
+
+5. the setfont applet does not support the -u option from kbd.
+
+There is work to get most of these supported by busybox, so this file
+will be updated as things change.

README.newnet

@@ -1,7 +1,3 @@
-The following applies only to the newnet stack, which is not presently
-maintained in OpenRC. The oldnet stack is maintained instead.
-- Robin H. Johnson <robbat2@gentoo.org>, 2011/02/21
-
 OpenRC Network Ideals
 ---------------------
 

STYLE

@@ -51,7 +51,7 @@ line separating the summary from the body is critical (unless you omit
 the body entirely); tools like rebase can get confused if you run the
 two together.
 
-Write your commit message in the present tense: "Fix bug" and not "Fixed
+Write your commit message in the imperative: "Fix bug" and not "Fixed
 bug."  This convention matches up with commit messages generated by
 commands like git merge and git revert.
 

conf.d/Makefile

@@ -1,7 +1,10 @@
-DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount urandom tmpfilesd ${CONF-${OS}}
+include ../mk/net.mk
 
-ifeq (${MKNET},)
+DIR=	${CONFDIR}
+CONF=	bootmisc fsck hostname localmount netmount urandom tmpfiles \
+		${CONF-${OS}}
+
+ifeq (${MKNET},yes)
 CONF+= network staticroute
 TARGETS+=	network staticroute
 CLEANFILES+=	network staticroute

conf.d/hostname

@@ -1,2 +1,2 @@
-# Set to the hostname of this machine
+# Set to the fully-qualified hostname of this machine
 hostname="localhost"

conf.d/net

@@ -1,4 +0,0 @@
-# This blank configuration will automatically use DHCP for any net.*
-# scripts in /etc/init.d.  To create a more complete configuration,
-# please review /usr/share/doc/openrc*/net.example* and save your configuration
-# in /etc/conf.d/net (this file :]!).

conf.d/netmount

@@ -0,0 +1,40 @@
+# You will need to set the dependencies in the netmount script to match
+# the network configuration tools you are using. This should be done in
+# this file by following the examples below, and not by changing the
+# service script itself.
+#
+# Each of these examples is meant to be used separately. So, for
+# example, do not set rc_need to something like "net.eth0 dhcpcd".
+#
+# If you are using newnet and configuring your interfaces with static
+# addresses with the network script, you  should use this setting.
+#
+#rc_need="network"
+#
+# If you are using oldnet, you must list the specific net.* services you
+# need.
+#
+# This example assumes all of your netmounts can be reached on
+# eth0.
+#
+#rc_need="net.eth0"
+#
+# This example assumes some of your netmounts are on eth1 and some
+# are on eth2.
+#
+#rc_need="net.eth1 net.eth2"
+#
+# If you are using a dynamic network management tool like
+# networkmanager, dhcpcd in standalone mode, wicd, badvpn-ncd, etc, to
+# manage the network interfaces with the routes to your netmounts, you
+# should list that tool.
+#
+#rc_need="networkmanager"
+#rc_need="dhcpcd"
+#rc_need="wicd"
+#
+# The default setting is designed to be backward compatible with our
+# current setup, but you are highly discouraged from using this. In
+# other words, please change it to be more suited to your system.
+#
+rc_need="net"

conf.d/network.in

@@ -7,7 +7,7 @@
 # You also have ifup_eth0 and ifdown_eth0 to run other commands when
 # eth0 is started and stopped.
 # You should note that we don't stop the network at system shutdown by default.
-# If you really need this, then set shutdown_network=YES
+# If you really need this, then set keep_network=NO
 
 # Lastly, the interfaces variable pulls in virtual interfaces that cannot
 # be automatically detected.

doc/.gitignore

@@ -1 +0,0 @@
-net.example

doc/Makefile

@@ -1,11 +0,0 @@
-DIR=	${DOCDIR}/openrc
-SRCS=	net.example.in
-INC=	net.example
-
-MK=	../mk
-include ${MK}/os.mk
-
-%.example.in: %.example${SFX}
-	${CP} $< $@
-
-include ${MK}/scripts.mk

doc/net.example.BSD.in

@@ -1,442 +0,0 @@
-##############################################################################
-# QUICK-START
-#
-# The quickest start is if you want to use DHCP.
-# In that case, everything should work out of the box, no configuration
-# necessary, though the startup script will warn you that you haven't
-# specified anything.
-
-# WARNING :- some examples have a mixture of IPv4 (ie 192.168.0.1) and IPv6
-# (ie 4321:0:1:2:3:4:567:89ab) internet addresses. They only work if you have
-# the relevant kernel option enabled. So if you don't have an IPv6 enabled
-# kernel then remove the IPv6 address from your config.
-
-# If you want to use a static address or use DHCP explicitly, jump
-# down to the section labeled INTERFACE HANDLERS.
-#
-# If you want to do anything more fancy, you should take the time to
-# read through the rest of this file.
-
-##############################################################################
-# MODULES
-#
-# We now support modular networking scripts which means we can easily
-# add support for new interface types and modules while keeping
-# compatibility with existing ones.
-#
-# Modules load by default if the package they need is installed.  If
-# you specify a module here that doesn't have its package installed
-# then you get an error stating which package you need to install.
-# Ideally, you only use the modules setting when you have two or more
-# packages installed that supply the same service.
-#
-# In other words, you probably should DO NOTHING HERE...
-
-##############################################################################
-# INTERFACE HANDLERS
-
-# For a static configuration, use something like this
-#config_eth0="192.168.0.2/24"
-
-# If you need more than one address, you can use something like this
-# NOTE: ifconfig creates an aliased device for each extra IPv4 address
-#       (eth0:1, eth0:2, etc)
-#       iproute2 does not do this as there is no need to
-#config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
-
-# You can also use IPv6 addresses
-# (you should always specify a prefix length with IPv6 here)
-#config_eth0="192.168.0.2/24 4321:0:1:2:3:4:567:89ab/64 4321:0:1:2:3:4:567:89ac/64"
-
-# If you wish to keep existing addresses + routing and the interface is up,
-# you can specify a noop (no operation). If the interface is down or there
-# are no addresses assigned, then we move onto the next step (default dhcp)
-# This is useful when configuring your interface with a kernel command line
-# or similar
-#config_eth0="noop 192.168.0.2/24"
-
-# If you don't want ANY address (only useful when calling for advanced stuff)
-#config_eth0="null"
-
-# Here's how to do routing if you need it
-# We add an IPv4 default route, IPv4 subnet route and an IPv6 unicast route
-#routes_eth0="default via 192.168.0.1
-#10.0.0.0/8 via 192.168.0.1
-#::/0"
-
-# If a specified module fails (like dhcp - see below), you can specify a
-# fallback like so
-#fallback_eth0="192.168.0.2 netmask 255.255.255.0"
-#fallback_routes_eth0="default via 192.168.0.1"
-
-# NOTE: fallback entry must match the entry location in config_eth0
-# As such you can only have one fallback route.
-# Also, if you do not set a fallback_routes entry for an interface, the
-# routes entry will be used if that is set.
-
-# Some users may need to alter the MTU - here's how
-#mtu_eth0="1500"
-
-# Most drivers that report carrier status function correctly, but some do not
-# One of these faulty drivers is for the Intel e1000 network card, but only
-# at boot time. To get around this you may alter the carrier_timeout value for
-# the interface. -1 is disable, 0 is infinite and any other number of seconds
-# is how long we wait for carrier. The current default is 3 seconds
-#carrier_timeout_eth0=-1
-
-# You may wish to disable the interface being brought down when stopping.
-# This is only of use for WakeOnLan.
-#ifdown_eth0="NO"
-
-##############################################################################
-# OPTIONAL MODULES
-
-#-----------------------------------------------------------------------------
-# WIRELESS (802.11 support)
-# Wireless can be provided by BSDs ifconfig (iwconfig) or wpa_supplicant
-# wpa_supplicant is preferred, use the modules directive to prefer iwconfig.
-#modules="iwconfig"
-
-# ifconfig (iwconig) support is a one shot script - wpa_supplicant is daemon
-# that scans, associates and re-configures if association is lost.
-# We call it iwconfig to separate the wireless setup from ifconfig.
-####################################
-# HINTS
-#
-# Most users will just need to set the following options
-# key_SSID1="s:yourkeyhere enc open" # s: means a text key
-# key_SSID2="aaaa-bbbb-cccc-dd"      # no s: means a hex key
-# preferred_aps="SSID1 SSID2"
-#
-# Clear? Good. Now configure your wireless network below
-
-####################################
-# SETTINGS
-# Hard code an SSID to an interface - leave this unset if you wish the driver
-# to scan for available Access Points
-# I would only set this as a last resort really - use the preferred_aps
-# setting at the bottom of this file
-#essid_eth0='foo'
-
-# Some drivers/hardware don't scan all that well. We have no control over this
-# but we can say how many scans we want to do to try and get a better sweep of
-# the area. The default is 1.
-#scans_eth0="1"
-
-#Channel can be set (1-14), but defaults to 3 if not set.
-#
-# The below is taken verbatim from the BSD wavelan documentation found at
-# http://www.netbsd.org/Documentation/network/wavelan.html
-# There are 14 channels possible; We are told that channels 1-11 are legal for
-# North America, channels 1-13 for most of Europe, channels 10-13 for France,
-# and only channel 14 for Japan. If in doubt, please refer to the documentation
-# that came with your card or access point. Make sure that the channel you
-# select is the same channel your access point (or the other card in an ad-hoc
-# network) is on. The default for cards sold in North America and most of Europe
-# is 3; the default for cards sold in France is 11, and the default for cards
-# sold in Japan is 14.
-#channel_eth0="3"
-
-# Setup any other config commands. This is basically the ifconfig argument
-# without the ifconfig $iface.
-#ifconfig_eth0=""
-# You can do the same per SSID too.
-#ifconfig_SSID=""
-
-# Seconds to wait until associated. The default is to wait 10 seconds.
-# 0 means wait indefinitely. WARNING: this can cause an infinite delay when
-# booting.
-#associate_timeout_eth0="5"
-
-# Define a WEP key per SSID or MAC address (of the AP, not your card)
-# The encryption type (open or restricted) must match the
-# encryption type on the Access Point.
-# To set a hex key, prefix with 0x
-#key_SSID="0x12341234123412341234123456"
-# or you can use strings. Passphrase IS NOT supported
-#key_SSID="foobar"
-#key_SSID="foobar"
-
-# WEP key for the AP with MAC address 001122334455
-#mac_key_001122334455="foobar"
-
-# You can also override the interface settings found in /etc/conf.d/net
-# per SSID - which is very handy if you use different networks a lot
-#config_SSID="dhcp"
-#routes_SSID=
-#fallback_SSID=
-
-# Setting name/domain server causes /etc/resolv.conf to be overwritten
-# Note that if DHCP is used, and you want this to take precedence then
-# please put -R in your dhcpcd options
-#dns_servers_SSID="192.168.0.1 192.168.0.2"
-#dns_domain_SSID="some.domain"
-#dns_search_SSID="search.this.domain search.that.domain"
-# Please check the man page for resolv.conf for more information
-# as domain and search (searchdomains) are mutually exclusive and
-# searchdomains takes precedence
-
-# You can also set any of the /etc/conf.d/net variables per MAC address
-# incase you use Access Points with the same SSID but need different
-# networking configs. Below is an example - of course you use the same
-# method with other variables
-#config_001122334455="dhcp"
-#dns_servers_001122334455="192.168.0.1 192.168.0.2"
-
-# Map a MAC address to an SSID
-# This is used when the Access Point is not broadcasting its SSID
-# WARNING: This will override the SSID being broadcast due to some
-# Access Points sending an SSID even when they have been configured
-# not to!
-# Change 001122334455 to the MAC address and SSID to the SSID
-# it should map to
-#mac_essid_001122334455="SSID"
-
-# This lists the preferred SSIDs to connect to in order
-# SSID's can contain any characters here as they must match the broadcast
-# SSID exactly.
-# Surround each SSID with the " character and separate them with a space
-# If the first SSID isn't found then it moves onto the next
-# If this isn't defined then it connects to the first one found
-#preferred_aps="SSID1 SSID2"
-
-# You can also define a preferred_aps list per interface
-#preferred_aps_eth0="SSID3 SSID4"
-
-# You can also say whether we only connect to preferred APs or not
-# Values are "any", "preferredonly", "forcepreferred", "forcepreferredonly"
-# and "forceany"
-# "any" means it will connect to visible APs in the preferred list and then
-# any other available AP
-# "preferredonly" means it will only connect to visible APs in the preferred
-# list
-# "forcepreferred" means it will forcibly connect to APs in order if it does
-# not find them in a scan
-# "forcepreferredonly" means it forcibly connects to the APs in order and
-# does not bother to scan
-# "forceany" does the same as forcepreferred + connects to any other
-# available AP
-# Default is "any"
-#associate_order="any"
-#associate_order_eth0="any"
-
-# You can define blacklisted Access Points in the same way
-#blacklist_aps="SSID1 SSID2"
-#blacklist_aps_eth0="SSID3 SSID4"
-
-# If you have more than one wireless card, you can say if you want
-# to allow each card to associate with the same Access Point or not
-# Values are "yes" and "no"
-# Default is "yes"
-#unique_ap="yes"
-#unique_ap_eth0="yes"
-
-# IMPORTANT: preferred_only, blacklisted_aps and unique_ap only work when
-# essid_eth0 is not set and your card is capable of scanning
-
-# NOTE: preferred_aps  list ignores blacklisted_aps - so if you have
-# the same SSID in both, well, you're a bit silly :p
-
-##################################################
-# wpa_supplicant
-# emerge net-wireless/wpa_supplicant
-# Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Consult the wpa_supplicant.conf.example that is installed in
-# /usr/share/doc/wpa_supplicant
-
-# By default we don't wait for wpa_supplicant to associate and authenticate.
-# If you would like to, so can specify how long in seconds
-#associate_timeout_eth0=60
-# A value of 0 means wait forever.
-
-# You can also override any settings found here per SSID - which is very
-# handy if you use different networks a lot. See below for using the SSID
-# in our variables
-#config_SSID="dhcp"
-# See the System module below for setting dns/nis/ntp per SSID
-
-# You can also override any settings found here per MAC address of the AP
-# in case you use Access Points with the same SSID but need different
-# networking configs. Below is an example - of course you use the same
-# method with other variables
-#mac_config_001122334455="dhcp"
-#mac_dns_servers_001122334455="192.168.0.1 192.168.0.2"
-
-# When an interface has been associated with an Access Point, a global
-# variable called SSID is set to the Access Point's SSID for use in the
-# pre/post user functions below (although it's not available in preup as you
-# won't have associated then)
-
-# If you're using anything else to configure wireless on your interface AND
-# you have installed wpa_supplicant, you need to disable wpa_supplicant
-#modules="!iwconfig !wpa_supplicant"
-#or
-#modules="!wireless"
-
-##############################################################################
-# WIRELESS SSID IN VARIABLES
-##############################################################################
-# Remember to change SSID to your SSID.
-# Say that your SSID is My NET - the line
-#      #key_SSID="s:passkey"
-# becomes
-#      #key_My_NET="s:passkey"
-# Notice that the space has changed to an underscore - do the same with all
-# characters not in a-z A-Z (English alphabet) 0-9. This only applies to
-# variables and not values.
-#
-# Any SSID's in values like essid_eth0="My NET" may need to be escaped
-# This means placing the character \ before the character
-# \" need to be escaped for example
-# So if your SSID is
-#      My "\ NET
-# it becomes
-#      My \"\\ NET
-# for example
-#      #essid_eth0="My\"\\NET"
-#
-# So using the above we can use
-#      #dns_domain_My____NET="My\"\\NET"
-# which is an invalid dns domain, but shows the how to use the variable
-# structure
-#########################################################
-
-#-----------------------------------------------------------------------------
-# DHCP
-# DHCP can be provided by dhclient.
-#
-# dhcpcd:   emerge net-misc/dhcpcd
-# dhclient: emerge net-misc/dhcp
-
-# Regardless of which DHCP client you prefer, you configure them the
-# same way using one of following depending on which interface modules
-# you're using.
-#config_eth0="dhcp"
-
-# For passing custom options to dhcpcd use something like the following.  This
-# example reduces the timeout for retrieving an address from 60 seconds (the
-# default) to 10 seconds.
-#dhcpcd_eth0="-t 10"
-
-# GENERIC DHCP OPTIONS
-# Set generic DHCP options like so
-#dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
-
-# This tells the dhcp client to release its lease when it stops, not to
-# overwrite dns, ntp and nis settings, not to set a default route and not to
-# send the current hostname to the dhcp server and when it starts.
-# You can use any combination of the above options - the default is not to
-# use any of them.
-
-
-#-----------------------------------------------------------------------------
-# System
-# For configuring system specifics such as domain, dns, ntp and nis servers
-# It's rare that you would need todo this, but you can anyway.
-# This is most benefit to wireless users who don't use DHCP so they can change
-# their configs based on SSID.
-
-# If you omit the _eth0 suffix, then it applies to all interfaces unless
-# overridden by the interface suffix.
-#dns_domain_eth0="your.domain"
-#dns_servers_eth0="192.168.0.2 192.168.0.3"
-#dns_search_eth0="this.domain that.domain"
-#dns_options_eth0="timeout:1 rotate"
-#dns_sortlist_eth0="130.155.160.0/255.255.240.0 130.155.0.0"
-# See the man page for resolv.conf for details about the options and sortlist
-# directives
-
-#ntp_servers_eth0="192.168.0.2 192.168.0.3"
-
-#nis_domain_eth0="domain"
-#nis_servers_eth0="192.168.0.2 192.168.0.3"
-
-# NOTE: Setting any of these will stamp on the files in question. So if you
-# don't specify dns_servers but you do specify dns_domain then no nameservers
-# will be listed in /etc/resolv.conf even if there were any there to start
-# with.
-# If this is an issue for you then maybe you should look into a resolv.conf
-# manager like resolvconf-gentoo to manage this file for you. All packages
-# that baselayout supports use resolvconf-gentoo if installed.
-
-#-----------------------------------------------------------------------------
-# Cable in/out detection
-# Sometimes the cable is in, others it's out. Obviously you don't want to
-# restart net.eth0 every time when you plug it in either.
-# BSD has the Device State Change Daemon - or devd for short
-# To enable this,  simple add devd to the boot runlevel
-#rc-update add devd boot
-#rc
-
-##############################################################################
-# ADVANCED CONFIGURATION
-#
-# Four functions can be defined which will be called surrounding the
-# start/stop operations.  The functions are called with the interface
-# name first so that one function can control multiple adapters. An extra two
-# functions can be defined when an interface fails to start or stop.
-#
-# The return values for the preup and predown functions should be 0
-# (success) to indicate that configuration or deconfiguration of the
-# interface can continue.  If preup returns a non-zero value, then
-# interface configuration will be aborted.  If predown returns a
-# non-zero value, then the interface will not be allowed to continue
-# deconfiguration.
-#
-# The return values for the postup, postdown, failup and faildown functions are
-# ignored since there's nothing to do if they indicate failure.
-#
-# ${IFACE} is set to the interface being brought up/down
-# ${IFVAR} is ${IFACE} converted to variable name bash allows
-#
-# For historical and compatibility reasons, preup is actually normally called
-# in the following sequence: up ; preup ; up.
-# The first up causes the kernel to initialize the device, so
-# that it is available for use in the preup function.  However, for some
-# hardware, e.g. CAN devices, some configuration is needed before trying to up
-# the interface will actually work. For such hardware, the
-# up_before_preup variables will allow skipping the first up call if set
-# to yes.
-#up_before_preup_IFVAR="NO"
-#up_before_preup="NO"
-
-#preup() {
-#	# Remember to return 0 on success
-#	return 0
-#}
-
-#predown() {
-#	# The default in the script is to test for NFS root and disallow
-#	# downing interfaces in that case.  Note that if you specify a
-#	# predown() function you will override that logic.  Here it is, in
-#	# case you still want it...
-#	if is_net_fs /; then
-#		eerror "root filesystem is network mounted -- can't stop ${IFACE}"
-#		return 1
-#	fi
-#
-#	# Remember to return 0 on success
-#	return 0
-#}
-
-#postup() {
-#	# This function could be used, for example, to register with a
-#	# dynamic DNS service.  Another possibility would be to
-#	# send/receive mail once the interface is brought up.
-
-#}
-
-#postdown() {
-#	# Return 0 always
-#	return 0
-#}
-
-#failup() {
-#       # This function is mostly here for completeness... I haven't
-#       # thought of anything nifty to do with it yet ;-)
-#}
-
-#faildown() {
-#       # This function is mostly here for completeness... I haven't
-#       # thought of anything nifty to do with it yet ;-)
-#}

etc/rc.conf.DragonFly

@@ -0,0 +1,13 @@
+##############################################################################
+# DragonFly BSD SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on DragonFly BSD:
+# ""        - nothing special
+# "jail"    - DragonFly BSD jails
+# "prefix"  - Prefix
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+

etc/rc.conf.Linux

@@ -20,10 +20,59 @@
 # consolefont, numlock, etc ...)
 rc_tty_number=12
 
+##############################################################################
+# CGROUPS RESOURCE MANAGEMENT
+
 # If you have cgroups turned on in your kernel, this switch controls
-# whether or not a group for each controler is mounted under
+# whether or not a group for each controller is mounted under
 # /sys/fs/cgroup.
-# Support for process management by cgroups is planned in the future,
-# so if you turn this off, be aware that you may not be able to use that
-# feature.
+# None of the other options in this section work if this is set to "NO".
 #rc_controller_cgroups="YES"
+
+# The following settings allow you to set up values for the cgroup
+# controllers for your services.
+# They can be set in this file;, however, if you do this, the settings
+# will apply to all of your services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the names of the settings followed by their
+# values. Each variable can hold multiple settings.
+# For example, you would use this to set the cpu.shares setting in the
+# cpu controller to 512 for your service.
+# rc_cgroup_cpu="
+# cpu.shares 512
+# "
+#
+#For more information about the adjustments that can be made with
+#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
+
+# Set the blkio controller settings for this service.
+#rc_cgroup_blkio=""
+
+# Set the cpu controller settings for this service.
+#rc_cgroup_cpu=""
+
+# Add this service to the cpuacct controller (any value means yes).
+#rc_cgroup_cpuacct=""
+
+# Set the cpuset controller settings for this service.
+#rc_cgroup_cpuset=""
+
+# Set the devices controller settings for this service.
+#rc_cgroup_devices=""
+
+# Set the memory controller settings for this service.
+#rc_cgroup_memory=""
+
+# Set the net_prio controller settings for this service.
+#rc_cgroup_net_prio=""
+
+# Set this to YES if yu want all of the processes in a service's cgroup
+# killed when the service is stopped or restarted.
+# This should not be set globally because it kills all of the service's
+# child processes, and most of the time this is undesirable. Please set
+# it in /etc/conf.d/<service>.
+# To perform this cleanup manually for a stopped service, you can
+# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
+# rc-service <service> cgroup_cleanup.
+# rc_cgroup_cleanup="NO"

etc/rc.conf.in

@@ -80,6 +80,10 @@
 # Set unicode to YES to turn on unicode support for keyboards and screens.
 #unicode="NO"
 
+# This is how long fuser should wait for a remote server to respond. The
+# default is 60 seconds, but  it can be adjusted here.
+#rc_fuser_timeout=60
+
 # Below is the default list of network fstypes.
 #
 # afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
@@ -94,10 +98,14 @@
 # These variables are documented here, but should be configured in
 # /etc/conf.d/foo for service foo and NOT enabled here unless you
 # really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
 
 # Some daemons are started and stopped via start-stop-daemon.
 # We can set some things on a per service basis, like the nicelevel.
-#export SSD_NICELEVEL="-19"
+#SSD_NICELEVEL="-19"
 
 # Pass ulimit parameters
 #rc_ulimit="-u 30"
@@ -116,6 +124,13 @@
 #rc_foo_need="openvpn"
 #rc_foo_after="clock"
 
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
 # You can also remove dependencies.
 # This is mainly used for saying which servies do NOT provide net.
 #rc_net_tap0_provide="!net"

etc/rc.devd

@@ -3,8 +3,9 @@
 # Released under the 2-clause BSD license.
 
 # Inform RC that we are in the background and hotplugged
-export IN_BACKGROUND=yes
-export IN_HOTPLUG=yes
+IN_BACKGROUND=yes
+IN_HOTPLUG=yes
+export IN_BACKGROUND IN_HOTPLUG
 
 getmedia() {
 	ifconfig "$1" | while read line; do

etc/rc.in

@@ -4,7 +4,7 @@
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)
-[ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@"
+[ -z "$TERM" -o "$TERM" = "dumb" ] && TERM="@TERM@" && export TERM
 
 # Handle interrupts
 trap : SIGINT

etc/rc.shutdown.in

@@ -7,11 +7,11 @@ trap : SIGINT SIGQUIT
 
 # Try and use stuff in /lib over anywhere else so we can shutdown
 # local mounts correctly.
-export LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}"
+LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}" ; export LD_LIBRARY_PATH
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)
-[ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@"
+[ -z "$TERM" -o "$TERM" = "dumb" ] && TERM="@TERM@" && export TERM
 
 action=${1:-shutdown}
 exec /sbin/rc "${action}"

init.d.misc/avahi-dnsconfd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/avahid.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/dbus.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/dhcpcd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/dnsmasq.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/hald.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/named.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/ntpd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/openvpn.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/polkitd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/sshd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/wpa_supplicant.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/.gitignore

@@ -4,8 +4,6 @@ hostname
 local
 localmount
 moused
-net.lo
-net.lo0
 netmount
 network
 root
@@ -41,5 +39,5 @@ syslogd
 termencoding
 ttys
 wscons
-tmpfilesd.boot
-tmpfilesd.sysinit
+tmpfiles.dev
+tmpfiles.setup

init.d/Makefile

@@ -1,24 +1,19 @@
+include ../mk/net.mk
+
 DIR=	${INITDIR}
-SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
-	root.in savecache.in swap.in swapfiles.in \
-	tmpfilesd.boot.in tmpfilesd.sysinit.in \
-	swclock.in sysctl.in urandom.in ${SRCS-${OS}}
+SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in \
+	netmount.in root.in savecache.in swap.in swapfiles.in \
+	tmpfiles.setup.in swclock.in sysctl.in urandom.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
-# Build our old net foo or not
-ifeq (${MKNET},)
+# Are we installing our network scripts?
+ifeq (${MKNET},yes)
 SRCS+= network.in staticroute.in
 endif
 
-ifeq (${MKNET},oldnet)
-INSTALLAFTER=	_installafter_net.lo
-SRCS+= net.lo.in
-endif
-
 MK=	../mk
 include ${MK}/os.mk
 
-NET_LO-FreeBSD=	net.lo0
 # Generic BSD scripts
 SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 		rpcbind.in savecore.in syslogd.in
@@ -26,12 +21,10 @@ SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in encswap.in ipfw.in \
 		mixer.in nscd.in powerd.in syscons.in
 
-NET_LO-Linux=	net.lo
 SRCS-Linux=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
 		killprocs.in modules.in mount-ro.in mtab.in numlock.in \
-		procfs.in sysfs.in termencoding.in
+		procfs.in sysfs.in termencoding.in tmpfiles.dev.in
 
-NET_LO-NetBSD=	net.lo0
 # Generic BSD scripts
 SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 		rpcbind.in savecore.in syslogd.in
@@ -44,6 +37,3 @@ SRCS-NetBSD+=	devdb.in swap-blk.in ttys.in wscons.in
 include ${MK}/scripts.mk
 
 _installafter_: realinstall
-
-_installafter_net.lo: realinstall
-	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO-${OS}}

init.d/adjkerntz.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/bootmisc.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -27,9 +27,9 @@ cleanup_tmp_dir()
 		ebegin "Wiping $dir directory"
 
 		# Faster than raw find
-		if ! rm -rf -- [^ajlq\.]* 2>/dev/null ; then
+		if ! rm -rf -- [!ajlq\.]* 2>/dev/null ; then
 			# Blah, too many files
-			find . -maxdepth 1 -name '[^ajlq\.]*' -exec rm -rf -- {} +
+			find . -maxdepth 1 -name '[!ajlq\.]*' -exec rm -rf -- {} +
 		fi
 
 		# pam_mktemp creates a .private directory within which
@@ -59,6 +59,34 @@ cleanup_tmp_dir()
 	fi
 }
 
+cleanup_var_run_dir()
+{
+	ebegin "Cleaning /var/run"
+	for x in $(find /var/run ! -type d ! -name utmp \
+		! -name random-seed ! -name dev.db \
+		! -name ld-elf.so.hints ! -name ld.so.hints);
+	do
+		# Clean stale sockets
+		if [ -S "$x" ]; then
+			if type fuser >/dev/null 2>&1; then
+				fuser "$x" >/dev/null 2>&1 || rm -- "$x"
+			else
+				rm -- "$x"
+			fi
+		fi
+		[ ! -f "$x" ] && continue
+		# Do not remove pidfiles of already running daemons
+		case "$x" in
+			*.pid)
+				start-stop-daemon --test --quiet \
+				--stop --pidfile "$x" && continue
+			;;
+		esac
+		rm -f -- "$x"
+	done
+	eend 0
+}
+
 mkutmp()
 {
 	: >"$1"
@@ -87,6 +115,16 @@ migrate_to_run()
  	fi
 }
 
+clean_run()
+{
+	local dir
+	dir=$(mktemp -d)
+	mount --bind / $dir
+	rm -rf $dir/run/*
+	umount $dir
+	rm -rf $dir
+}
+
 start()
 {
 	# Remove any added console dirs
@@ -115,6 +153,7 @@ start()
 	if [ "$RC_UNAME" = Linux -a -d /run ]; then
 		migrate_to_run	/var/lock /run/lock
 		migrate_to_run	/var/run /run
+		clean_run
 	fi
 
 	if checkpath -W /var/run; then
@@ -127,36 +166,13 @@ start()
 		[ -e /var/log/wtmp ] || mkutmp /var/log/wtmp
 		eend 0
 
-		ebegin "Cleaning /var/run"
-		for x in $(find /var/run ! -type d ! -name utmp \
-			! -name random-seed ! -name dev.db \
-			! -name ld-elf.so.hints ! -name ld.so.hints);
-		do
-			# Clean stale sockets
-			if [ -S "$x" ]; then
-				if type fuser >/dev/null 2>&1; then
-					fuser "$x" >/dev/null 2>&1 || rm -- "$x"
-				else
-					rm -- "$x"
-				fi
-			fi
-			[ ! -f "$x" ] && continue
-			# Do not remove pidfiles of already running daemons
-			case "$x" in
-				*.pid)
-					start-stop-daemon --test --quiet \
-					--stop --pidfile "$x" && continue
-				;;
-			esac
-			rm -f -- "$x"
-		done
-		eend 0
+		mountinfo -q -f tmpfs /var/run || cleanup_var_run_dir
 	fi
 
 	# Clean up /tmp directories
 	local tmp=
 	for tmp in ${clean_tmp_dirs:-${wipe_tmp_dirs-/tmp}}; do
-		cleanup_tmp_dir "$tmp"
+		mountinfo -q -f tmpfs "$tmp" || cleanup_tmp_dir "$tmp"
 	done
 
 	if checkpath -W /tmp; then
@@ -174,7 +190,7 @@ start()
 	if yesno $log_dmesg; then
 		if $logw || checkpath -W /var/log; then
 			# Create an 'after-boot' dmesg log
-			if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ ]; then
+			if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ -a "$RC_SYS" != LXC ]; then
 				dmesg > /var/log/dmesg
 				chmod 640 /var/log/dmesg
 			fi

init.d/consolefont.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -53,14 +53,10 @@ start()
 	done
 	eend $retval
 
-	# Store the last font so we can use it ASAP on boot
+	# Store the font so we can use it ASAP on boot
 	if [ $retval -eq 0 ] && checkpath -W "$RC_LIBEXECDIR"; then
 		mkdir -p "$RC_LIBEXECDIR"/console
-		for font in /usr/share/consolefonts/"$consolefont".*; do
-			:
-		done
-		cp "$font" "$RC_LIBEXECDIR"/console
-		echo "${font##*/}" >"$RC_LIBEXECDIR"/console/font
+		setfont -O "$RC_LIBEXECDIR"/console/font
 	fi
 
 	return $retval

init.d/devd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/devdb.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/devfs.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -7,12 +7,13 @@ description="Mount system critical filesystems in /dev."
 depend() {
 	use dev-mount
 	before dev
-	keyword -prefix -vserver
+	keyword -prefix -vserver -lxc
 }
 
 start() {
 	# Mount required stuff as user may not have then in /etc/fstab
 	for x in \
+		"mqueue /dev/mqueue 1777 ,nodev mqueue" \
 		"devpts /dev/pts 0755 ,gid=5,mode=0620 devpts" \
 		"tmpfs /dev/shm 1777 ,nodev shm" \
 	; do

init.d/dmesg.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/dumpon.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/encswap.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright 1992-2012 FreeBSD Project
 # Released under the 2-clause BSD license
 

init.d/fsck.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -71,14 +71,12 @@ start()
 	done
 
 	if [ "$RC_UNAME" = Linux ]; then
-		local skiptypes x
-		for x in $net_fs_list $extra_net_fs_list; do
-			skiptypes="${skiptypes}no${x},"
-		done
-		skiptypes="${skiptypes}noopts=_netdev"
-		fsck_opts="$fsck_opts -C0 -T -t $skiptypes"
+		local skiptypes
+		skiptypes=$(printf 'no%s,' ${net_fs_list} ${extra_net_fs_list})
+		[ "${skiptypes}" = "no," ] && skiptypes=""
+		fsck_opts="$fsck_opts -C0 -T -t ${skiptypes}noopts=_netdev"
 		if [ -z "$fsck_passno" -a -z "$fsck_mnt" ]; then
-			fsck_args=${fsck_args--A -p}
+			fsck_args=${fsck_args:--A -p}
 			if echo 2>/dev/null >/.test.$$; then
 				rm -f /.test.$$
 				fsck_opts="$fsck_opts -R"
@@ -87,7 +85,7 @@ start()
 	fi
 
 	trap : INT QUIT
-	fsck ${fsck_args--p} $fsck_opts "$@"
+	fsck ${fsck_args:--p} $fsck_opts "$@"
 	case $? in
 	0)	eend 0; return 0;;
 	1)	ewend 1 "Filesystems repaired"; return 0;;

init.d/hostid.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/hostname.in

@@ -5,12 +5,38 @@
 description="Sets the hostname of the machine."
 
 depend() {
-	keyword -prefix -lxc
+	need root
 }
 
 start()
 {
 	hostname=${hostname-${HOSTNAME-localhost}}
+	out=$hostname
+	short=${hostname%%.*}
+	if [ "$short" != "$hostname" ]; then
+		out="$out $short"
+	fi
+	if [ "$nisdomainname" != "" ]; then
+		ebegin "Setting NIS domain name to $nisdomainname"
+		nisdomainname $nisdomainname
+		eend $? "Failed to set the NIS domain name"
+	fi
+	if [ "$short" != "localhost" ]; then
+		out="$out localhost"
+	fi
+	if [ "$hostname" != "localhost.localdomain" ]; then
+		out="$out localhost.localdomain"
+	fi
+	[ -n "$aliases" ] && out="$out $aliases"
+	ebegin "Configuring /etc/hosts"
+	[ -e /etc/hosts ] && sed -i -e '/[[:space:]]*127.0.0.1[[:space:]]/d' -e '/[[:space:]]*::1[[:space:]]/d' /etc/hosts
+	cat <<END >> /etc/hosts
+127.0.0.1	$out
+::1		$out
+END
+	chmod 0644 /etc/hosts
+	eend $?
+	[ "$RC_SYS" = "LXC" ] && return 0
 	ebegin "Setting hostname to $hostname"
 	hostname "$hostname"
 	eend $? "Failed to set the hostname"

init.d/hwclock.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/ipfw.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -8,7 +8,7 @@ ipfw_ip_in=${ipfw_ip_in-any}
 ipfw_ports_in=${ipfw_ports_in-auth ssh}
 ipfw_ports_nolog=${ipfw_ports_nolog-135-139,445 1026,1027 1433,1434}
 
-opts="panic showstatus"
+extra_commands="panic showstatus"
 
 depend() {
 	before net

init.d/keymaps.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -58,7 +58,7 @@ start()
 	if yesno $fix_euro; then
 		ebegin "Fixing font for euro symbol"
 		# Fix some fonts displaying the Euro, #173528.
-		echo "altgr keycode 18 = U+20AC" | loadkeys -q
+		echo "altgr keycode 18 = U+20AC" | loadkeys -q -
 		eend $?
 	fi
 

init.d/killprocs.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/local.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/localmount.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -9,7 +9,7 @@ depend()
 	need fsck
 	use lvm modules mtab
 	after lvm modules
-	keyword -jail -openvz -prefix -vserver -lxc
+	keyword -jail -prefix -vserver -lxc
 }
 
 start()
@@ -17,11 +17,14 @@ start()
 	# Mount local filesystems in /etc/fstab.
 	local types="noproc" x= no_netdev=
 	for x in $net_fs_list $extra_net_fs_list; do
-		types="${types},${x}"
+		types="${types},no${x}"
 	done
 
 	if [ "$RC_UNAME" = Linux ]; then
 		no_netdev="-O no_netdev"
+		if mountinfo -q /usr; then
+			touch "$RC_SVCDIR"/usr_premounted
+		fi
 	fi
 	ebegin "Mounting local filesystems"
 	mount -at "$types" $no_netdev
@@ -37,7 +40,7 @@ stop()
 	# We never unmount / or /dev or $RC_SVCDIR
 
 	# Bug 381783
-	local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
+	local rc_svcdir=$(printf '%s\n' "$RC_SVCDIR" | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
 
 	local x= no_umounts_r="/|/dev|/dev/.*|${rc_svcdir}"
 	no_umounts_r="${no_umounts_r}|/bin|/sbin|/lib(32|64)?|/libexec"
@@ -48,7 +51,10 @@ stop()
 	done
 
 	if [ "$RC_UNAME" = Linux ]; then
-		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*|/usr"
+		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*"
+		if [ -e "$rc_svcdir"/usr_premounted ]; then
+			no_umounts_r="$no_umounts_r|/usr"
+		fi
 	fi
 	no_umounts_r="^($no_umounts_r)$"
 

init.d/mixer.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/modules.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/mount-ro.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/moused.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/mtab.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -28,7 +28,7 @@ start()
 	# makes / readonly and dismounts all tmpfs even if in use which is
 	# not good. Luckily, umount uses /etc/mtab instead of /proc/mounts
 	# which allows this hack to work.
-	grep -v "^[^ ]* / tmpfs " /proc/mounts > /etc/mtab
+	grep -v "^[! ]* / tmpfs " /proc/mounts > /etc/mtab
 
 	# Remove stale backups
 	rm -f /etc/mtab~ /etc/mtab~~

init.d/net.lo.in

@@ -1,772 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
-
-MODULESDIR="${RC_LIBEXECDIR}/net"
-MODULESLIST="${RC_SVCDIR}/nettree"
-_config_vars="config routes"
-
-[ -z "${IN_BACKGROUND}" ] && IN_BACKGROUND="NO"
-
-description="Configures network interfaces."
-
-# Handy var so we don't have to embed new lines everywhere for array splitting
-__IFS="
-"
-depend()
-{
-	local IFACE=${RC_SVCNAME#*.}
-	local IFVAR=$(shell_var "${IFACE}")
-
-	need localmount
-	if [ "$RC_UNAME" = Linux -a "$IFACE" != lo ]; then
-		need sysfs
-	fi
-	after bootmisc
-	keyword -jail -prefix -vserver
-
-	case "${IFACE}" in
-		lo|lo0) ;;
-		*)
-			after net.lo net.lo0 dbus
-			provide net
-			;;
-	esac
-
-	if [ "$(command -v "depend_${IFVAR}")" = "depend_${IFVAR}" ]; then
-		depend_${IFVAR}
-	fi
-
-	local dep= prov=
-	for dep in need use before after provide keyword; do
-		eval prov=\$rc_${dep}_${IFVAR}
-		if [ -n "${prov}" ]; then
-			${dep} ${prov}
-			ewarn "rc_${dep}_${IFVAR} is deprecated."
-			ewarn "Please use rc_net_${IFVAR}_${dep} instead."
-		fi
-	done
-}
-
-# Support bash arrays - sigh
-_array_helper()
-{
-	local _a=
-
-	eval _a=\$$1
-	_a=$(echo "${_a}" | sed -e 's:^[[:space:]]*::' -e 's:[[:space:]]*$::' -e '/^$/d' -e 's:[[:space:]]\{1,\}: :g')
-
-	[ -n "${_a}" ] && printf "%s\n" "${_a}"
-}
-
-_get_array()
-{
-	local _a=
-	if [ -n "${BASH}" ]; then
-		case "$(declare -p "$1" 2>/dev/null)" in
-			"declare -a "*)
-				ewarn "You are using a bash array for $1."
-				ewarn "This feature will be removed in the future."
-				ewarn "Please see net.example for the correct format for $1."
-				eval "set -- \"\${$1[@]}\""
-				for _a; do
-					printf "%s\n" "${_a}"
-				done
-				return 0
-				;;
-		esac
-	fi
-
-	_array_helper $1
-}
-
-# Flatten bash arrays to simple strings
-_flatten_array()
-{
-	if [ -n "${BASH}" ]; then
-		case "$(declare -p "$1" 2>/dev/null)" in
-			"declare -a "*)
-				ewarn "You are using a bash array for $1."
-				ewarn "This feature will be removed in the future."
-				ewarn "Please see net.example for the correct format for $1."
-				eval "set -- \"\${$1[@]}\""
-				for x; do
-					printf "'%s' " "$(printf "$x" | sed "s:':'\\\'':g")"
-				done
-				return 0
-				;;
-		esac
-	fi
-
-	_array_helper $1
-}
-
-_wait_for_carrier()
-{
-	local timeout= efunc=einfon
-
-	_has_carrier  && return 0
-
-	eval timeout=\$carrier_timeout_${IFVAR}
-	timeout=${timeout:-${carrier_timeout:-5}}
-
-	# Incase users don't want this nice feature ...
-	[ ${timeout} -le 0 ] && return 0
-
-	yesno ${RC_PARALLEL} && efunc=einfo
-	${efunc} "Waiting for carrier (${timeout} seconds) "
-	while [ ${timeout} -gt 0 ]; do
-		sleep 1
-		if _has_carrier; then
-			[ "${efunc}" = "einfon" ] && echo
-			eend 0
-			return 0
-		fi
-		: $(( timeout -= 1 ))
-		[ "${efunc}" = "einfon" ] && printf "."
-	done
-
-	[ "${efunc}" = "einfon" ] && echo
-	eend 1
-	return 1
-}
-
-_netmask2cidr()
-{
-	# Some shells cannot handle hex arithmetic, so we massage it slightly
-	# Buggy shells include FreeBSD sh, dash and busybox.
-	# bash and NetBSD sh don't need this.
-	case $1 in
-		0x*)
-		local hex=${1#0x*} quad=
-		while [ -n "${hex}" ]; do
-			local lastbut2=${hex#??*}
-			quad=${quad}${quad:+.}0x${hex%${lastbut2}*}
-			hex=${lastbut2}
-		done
-		set -- ${quad}
-		;;
-	esac
-
-	local i= len=
-	local IFS=.
-	for i in $1; do
-		while [ ${i} -ne 0 ]; do
-			: $(( len += i % 2 ))
-			: $(( i >>= 1 ))
-		done
-	done
-
-	echo "${len}"
-}
-
-_configure_variables()
-{
-	local var= v= t=
-
-	for var in ${_config_vars}; do
-		local v=
-		for t; do
-			eval v=\$${var}_${t}
-			if [ -n "${v}" ]; then
-				eval ${var}_${IFVAR}=\$${var}_${t}
-				continue 2
-			fi
-		done
-	done
-}
-
-_which()
-{
-	local i OIFS
-	# Empty
-	[ -z "$1" ] && return
-	# check paths
-	OIFS="$IFS"
-	IFS=:
-	for i in $PATH ; do
-		[ -x $i/$1 ] && echo $i/$1 && break
-	done
-	IFS=$OIFS
-}
-
-# Like _which, but also consider shell builtins, and multiple alternatives
-_program_available()
-{
-	[ -z "$1" ] && return 0
-	local x=
-	for x; do
-		case "${x}" in
-			/*) [ -x "${x}" ] && break;;
-			*) type "${x}" >/dev/null 2>&1 && break;;
-		esac
-		unset x
-	done
-	[ -n "${x}" ] && echo $x && return 0
-	return 1
-}
-
-_show_address()
-{
-	einfo "received address $(_get_inet_address "${IFACE}")"
-}
-
-# Basically sorts our modules into order and saves the list
-_gen_module_list()
-{
-	local x= f= force=$1
-	if ! ${force} && [ -s "${MODULESLIST}" -a "${MODULESLIST}" -nt "${MODULESDIR}" ]; then
-		local update=false
-		for x in "${MODULESDIR}"/*.sh; do
-			[ -e "${x}" ] || continue
-			if [ "${x}" -nt "${MODULESLIST}" ]; then
-				update=true
-				break
-			fi
-		done
-		${update} || return 0
-	fi
-
-	einfo "Caching network module dependencies"
-	# Run in a subshell to protect the main script
-	(
-	after() {
-		eval ${MODULE}_after="\"\${${MODULE}_after}\${${MODULE}_after:+ }$*\""
-	}
-
-	before() {
-		local mod=${MODULE}
-		local MODULE=
-		for MODULE; do
-			after "${mod}"
-		done
-	}
-
-	program() {
-		if [ "$1" = "start" -o "$1" = "stop" ]; then
-			local s="$1"
-			shift
-			eval ${MODULE}_program_${s}="\"\${${MODULE}_program_${s}}\${${MODULE}_program_${s}:+ }$*\""
-		else
-			eval ${MODULE}_program="\"\${${MODULE}_program}\${${MODULE}_program:+ }$*\""
-		fi
-	}
-
-	provide() {
-		eval ${MODULE}_provide="\"\${${MODULE}_provide}\${${MODULE}_provide:+ }$*\""
-		local x
-		for x in $*; do
-			eval ${x}_providedby="\"\${${MODULE}_providedby}\${${MODULE}_providedby:+ }${MODULE}\""
-		done
-	}
-
-	for MODULE in "${MODULESDIR}"/*.sh; do
-		sh -n "${MODULE}" || continue
-		. "${MODULE}" || continue
-		MODULE=${MODULE#${MODULESDIR}/}
-		MODULE=${MODULE%.sh}
-		eval ${MODULE}_depend
-		MODULES="${MODULES} ${MODULE}"
-	done
-
-	VISITED=
-	SORTED=
-	visit() {
-		case " ${VISITED} " in
-			*" $1 "*) return;;
-		esac
-		VISITED="${VISITED} $1"
-
-		eval AFTER=\$${1}_after
-		for MODULE in ${AFTER}; do
-			eval PROVIDEDBY=\$${MODULE}_providedby
-			if [ -n "${PROVIDEDBY}" ]; then
-				for MODULE in ${PROVIDEDBY}; do
-					visit "${MODULE}"
-				done
-			else
-				visit "${MODULE}"
-			fi
-		done
-
-		eval PROVIDE=\$${1}_provide
-		for MODULE in ${PROVIDE}; do
-			visit "${MODULE}"
-		done
-
-		eval PROVIDEDBY=\$${1}_providedby
-		[ -z "${PROVIDEDBY}" ] && SORTED="${SORTED} $1"
-	}
-
-	for MODULE in ${MODULES}; do
-		visit "${MODULE}"
-	done
-
-	printf "" > "${MODULESLIST}"
-	i=0
-	for MODULE in ${SORTED}; do
-		eval PROGRAM=\$${MODULE}_program
-		eval PROGRAM_START=\$${MODULE}_program_start
-		eval PROGRAM_STOP=\$${MODULE}_program_stop
-		eval PROVIDE=\$${MODULE}_provide
-		echo "module_${i}='${MODULE}'" >> "${MODULESLIST}"
-		echo "module_${i}_program='${PROGRAM}'" >> "${MODULESLIST}"
-		echo "module_${i}_program_start='${PROGRAM_START}'" >> "${MODULESLIST}"
-		echo "module_${i}_program_stop='${PROGRAM_STOP}'" >> "${MODULESLIST}"
-		echo "module_${i}_provide='${PROVIDE}'" >> "${MODULESLIST}"
-		: $(( i += 1 ))
-	done
-	echo "module_${i}=" >> "${MODULESLIST}"
-	)
-
-	return 0
-}
-
-_load_modules()
-{
-	local starting=$1 mymods=
-
-	# Ensure our list is up to date
-	_gen_module_list false
-	if ! . "${MODULESLIST}"; then
-		_gen_module_list true
-		. "${MODULESLIST}"
-	fi
-
-	MODULES=
-	if [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
-		eval mymods=\$modules_${IFVAR}
-		[ -z "${mymods}" ] && mymods=${modules}
-	fi
-
-	local i=-1 x= mod= f= provides=
-	while true; do
-		: $(( i += 1 ))
-		eval mod=\$module_${i}
-		[ -z "${mod}" ] && break
-		[ -e "${MODULESDIR}/${mod}.sh" ] || continue
-
-		eval set -- \$module_${i}_program
-		if [ -n "$1" ]; then
-			if ! _program_available "$@" >/dev/null; then
-				vewarn "Skipping module $mod due to missing program: $@"
-				continue
-			fi
-		fi
-		if ${starting}; then
-			eval set -- \$module_${i}_program_start
-		else
-			eval set -- \$module_${i}_program_stop
-		fi
-		if [ -n "$1" ]; then
-			if ! _program_available "$@" >/dev/null; then
-				vewarn "Skipping module $mod due to missing program: $@"
-				continue
-			fi
-		fi
-
-		eval provides=\$module_${i}_provide
-		if ${starting}; then
-			case " ${mymods} " in
-				*" !${mod} "*) continue;;
-				*" !${provides} "*) [ -n "${provides}" ] && continue;;
-			esac
-		fi
-		MODULES="${MODULES}${MODULES:+ }${mod}"
-
-		# Now load and wrap our functions
-		if ! . "${MODULESDIR}/${mod}.sh"; then
-			eend 1 "${RC_SVCNAME}: error loading module \`${mod}'"
-			exit 1
-		fi
-
-		[ -z "${provides}" ] && continue
-
-		# Wrap our provides
-		local f=
-		for f in pre_start start post_start; do
-			eval "${provides}_${f}() { [ "$(command -v "${mod}_${f}")" = "${mod}_${f}" ] || return 0; ${mod}_${f} \"\$@\"; }"
-		done
-
-		eval module_${mod}_provides="${provides}"
-		eval module_${provides}_providedby="${mod}"
-	done
-
-	# Wrap our preferred modules
-	for mod in ${mymods}; do
-		case " ${MODULES} " in
-			*" ${mod} "*)
-			eval x=\$module_${mod}_provides
-			[ -z "${x}" ] && continue
-			for f in pre_start start post_start; do
-				eval "${x}_${f}() { [ "$(command -v "${mod}_${f}")" = "${mod}_${f}" ] || return 0; ${mod}_${f} \"\$@\"; }"
-			done
-			eval module_${x}_providedby="${mod}"
-			;;
-		esac
-	done
-
-	# Finally remove any duplicated provides from our list if we're starting
-	# Otherwise reverse the list
-	local LIST="${MODULES}" p=
-	MODULES=
-	if ${starting}; then
-		for mod in ${LIST}; do
-			eval x=\$module_${mod}_provides
-			if [ -n "${x}" ]; then
-				eval p=\$module_${x}_providedby
-				[ "${mod}" != "${p}" ] && continue
-			fi
-			MODULES="${MODULES}${MODULES:+ }${mod}"
-		done
-	else
-		for mod in ${LIST}; do
-			MODULES="${mod}${MODULES:+ }${MODULES}"
-		done
-	fi
-
-	veinfo "Loaded modules: ${MODULES}"
-}
-
-_load_config()
-{
-	local config="$(_get_array "config_${IFVAR}")"
-	local fallback="$(_get_array fallback_${IFVAR})"
-
-	config_index=0
-	local IFS="$__IFS"
-	set -- ${config}
-
-	# We should support a space separated array for cidr configs
-	# But only as long as they do not contain other parameters for the address
-	if [ $# = 1 ]; then
-		unset IFS
-		set -- ${config}
-		# Of course, we may have a single address added old style.
-		# If the NEXT argument is a v4 or v6 address, it's the next config.
-		# Otherwise, it's arguments to the first config...
-		if [ "${2#*.*}" = "${2}" -a "${2#*:*}" = "${2}" ]; then
-			# Not an IPv4/IPv6
-			local IFS="$__IFS"
-			set -- ${config}
-		fi
-	fi
-
-	# Ensure that loopback has the correct address
-	if [ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ]; then
-		if [ "$1" != "null" ]; then
-		   	config_0="127.0.0.1/8"
-			config_index=1
-		fi
-	else
-		if [ -z "$1" ]; then
-			ewarn "No configuration specified; defaulting to DHCP"
-			config_0="dhcp"
-			config_index=1
-		fi
-	fi
-
-
-	# We store our config in an array like vars
-	# so modules can influence it
-	for cmd; do
-		eval config_${config_index}="'${cmd}'"
-		: $(( config_index += 1 ))
-	done
-	# Terminate the list
-	eval config_${config_index}=
-
-	config_index=0
-	for cmd in ${fallback}; do
-		eval fallback_${config_index}="'${cmd}'"
-		: $(( config_index += 1 ))
-	done
-	# Terminate the list
-	eval fallback_${config_index}=
-
-	# Don't set to zero, so any net modules don't have to do anything extra
-	config_index=-1
-}
-
-# Support functions
-_run_if()
-{
-	local cmd=$1 iface=$2 ifr=${IFACE} ifv=${IFVAR}
-	# Ensure that we don't stamp on real values
-	local IFACE= IFVAR=
-	shift
-	if [ -n "${iface}" ]; then
-		IFACE="${iface}"
-		[ "${iface}" != "${ifr}" ] && IFVAR=$(shell_var "${IFACE}")
-	else
-		IFACE=${ifr}
-		IFVAR=${ifv}
-	fi
-	${cmd}
-}
-interface_exists()
-{
-	_run_if _exists "$@"
-}
-interface_up()
-{
-	_run_if _up "$@"
-}
-interface_down()
-{
-	_run_if _down "$@"
-}
-
-start()
-{
-	local IFACE=${RC_SVCNAME#*.} oneworked=false fallback=false module=
-	local IFVAR=$(shell_var "${IFACE}") cmd= our_metric=
-	local metric=0 _up_before_preup
-	eval _up_before_preup="\$up_before_preup_${IFVAR}"
-	[ -z "${_up_before_preup}" ] && _up_before_preup=$up_before_preup
-
-	einfo "Bringing up interface ${IFACE}"
-	eindent
-
-	if [ -z "${MODULES}" ]; then
-		local MODULES=
-		_load_modules true
-	fi
-
-	# We up the iface twice if we have a preup to ensure it's up if
-	# available in preup and afterwards incase the user inadvertently
-	# brings it down
-	if [ "$(command -v preup)" = "preup" ]; then
-		yesno "${_up_before_preup:-yes}" && _up 2>/dev/null
-		ebegin "Running preup"
-		eindent
-		preup || return 1
-		eoutdent
-	fi
-
-	_up 2>/dev/null
-
-	for module in ${MODULES}; do
-		if [ "$(command -v "${module}_pre_start")" = "${module}_pre_start" ]; then
-			${module}_pre_start || exit $?
-		fi
-	done
-
-	if ! _exists; then
-		eerror "ERROR: interface ${IFACE} does not exist"
-		eerror "Ensure that you have loaded the correct kernel module for your hardware"
-		return 1
-	fi
-
-	if ! _wait_for_carrier; then
-		if service_started devd; then
-			ewarn "no carrier, but devd will start us when we have one"
-			mark_service_inactive "${RC_SVCNAME}"
-		else
-			eerror "no carrier"
-		fi
-		return 1
-	fi
-
-	local config= config_index=
-	_load_config
-	config_index=0
-
-	eval our_metric=\$metric_${IFVAR}
-	if [ -n "${our_metric}" ]; then
-		metric=${our_metric}
-	elif [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
-		: $(( metric += $(_ifindex) ))
-	fi
-
-	while true; do
-		eval config=\$config_${config_index}
-		[ -z "${config}" ] && break
-
-		set -- ${config}
-		if [ "$1" != "null" -a "$1" != "noop" ]; then
-			ebegin "$1"
-		fi
-		eindent
-		case "$1" in
-			noop)
-				if [ -n "$(_get_inet_address)" ]; then
-					oneworked=true
-					break
-				fi
-				;;
-			null) :;;
-			[0-9]*|*:*) _add_address ${config};;
-			*)
-				if [ "$(command -v "${config}_start")" = "${config}_start" ]; then
-					"${config}"_start
-				else
-					eerror "nothing provides \`${config}'"
-				fi
-				;;
-		esac
-		if eend $?; then
-			oneworked=true
-		else
-			eval config=\$fallback_${config_index}
-			if [ -n "${config}" ]; then
-				fallback=true
-				eoutdent
-				ewarn "Trying fallback configuration ${config}"
-				eindent
-				eval config_${config_index}=\$config
-				unset fallback_${config_index}
-				: $(( config_index -= 1 ))
-			fi
-		fi
-		eoutdent
-		: $(( config_index += 1 ))
-	done
-
-	if ! ${oneworked}; then
-		if [ "$(command -v failup)" = "failup" ]; then
-			ebegin "Running failup"
-			eindent
-			failup
-			eoutdent
-		fi
-		return 1
-	fi
-
-	local hidefirstroute=false first=true routes=
-	if ${fallback}; then
-		routes="$(_get_array "fallback_routes_${IFVAR}")"
-	fi
-	if [ -z "${routes}" ]; then
-		routes="$(_get_array "routes_${IFVAR}")"
-	fi
-	if [ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ]; then
-		if [ "${config_0}" != "null" ]; then
-			routes="127.0.0.0/8 via 127.0.0.1
-${routes}"
-			hidefirstroute=true
-		fi
-	fi
-
-	local OIFS="${IFS}" SIFS="${IFS-y}"
-	local IFS="$__IFS"
-	for cmd in ${routes}; do
-		unset IFS
-		if ${first}; then
-			first=false
-			einfo "Adding routes"
-		fi
-		eindent
-		ebegin ${cmd}
-		# Work out if we're a host or a net if not told
-		case ${cmd} in
-			-net" "*|-host" "*);;
-			*" "netmask" "*)                   cmd="-net ${cmd}";;
-			*.*.*.*/32*)                       cmd="-host ${cmd}";;
-			*.*.*.*/*|0.0.0.0|0.0.0.0" "*)     cmd="-net ${cmd}";;
-			default|default" "*)               cmd="-net ${cmd}";;
-			*)                                 cmd="-host ${cmd}";;
-		esac
-		if ${hidefirstroute}; then
-			_add_route ${cmd} >/dev/null 2>&1
-			hidefirstroute=false
-		else
-			_add_route ${cmd} >/dev/null
-		fi
-		eend $?
-		eoutdent
-	done
-	if [ "${SIFS}" = "y" ]; then
-		unset IFS
-	else
-		IFS="${OIFS}"
-	fi
-
-	for module in ${MODULES}; do
-		if [ "$(command -v "${module}_post_start")" = "${module}_post_start" ]; then
-			${module}_post_start || exit $?
-		fi
-	done
-
-	if [ "$(command -v postup)" = "postup" ]; then
-		ebegin "Running postup"
-		eindent
-		postup
-		eoutdent
-	fi
-
-	return 0
-}
-
-stop()
-{
-	local IFACE=${RC_SVCNAME#*.} module=
-	local IFVAR=$(shell_var "${IFACE}") opts=
-
-	einfo "Bringing down interface ${IFACE}"
-	eindent
-
-	if [ -z "${MODULES}" ]; then
-		local MODULES=
-		_load_modules false
-	fi
-
-	if [ "$(command -v predown)" = "predown" ]; then
-		ebegin "Running predown"
-		eindent
-		predown || return 1
-		eoutdent
-	else
-		if is_net_fs /; then
-			eerror "root filesystem is network mounted -- can't stop ${IFACE}"
-			return 1
-		fi
-	fi
-
-	for module in ${MODULES}; do
-		if [ "$(command -v "${module}_pre_stop")" = "${module}_pre_stop" ]; then
-			${module}_pre_stop || exit $?
-		fi
-	done
-
-	for module in ${MODULES}; do
-		if [ "$(command -v "${module}_stop")" = "${module}_stop" ]; then
-			${module}_stop
-		fi
-	done
-
-	# Only delete addresses for interfaces that exist
-	if _exists; then
-		# PPP can manage it's own addresses when IN_BACKGROUND
-		# Important in case "demand" set on the ppp link
-		if ! (yesno ${IN_BACKGROUND} && is_ppp) ; then
-			_delete_addresses "${IFACE}"
-		fi
-	fi
-
-	for module in ${MODULES}; do
-		if [ "$(command -v "${module}_post_stop")" = "${module}_post_stop" ]; then
-			${module}_post_stop
-		fi
-	done
-
-	# If not in background, and not loopback then bring the interface down
-	# unless overridden.
-	if ! yesno ${IN_BACKGROUND} && \
-	[ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
-		eval module=\$ifdown_${IFVAR}
-		module=${module:-${ifdown:-YES}}
-		yesno ${module} && _down 2>/dev/null
-	fi
-
-	type resolvconf >/dev/null 2>&1 && resolvconf -d "${IFACE}" 2>/dev/null
-
-	if [ "$(command -v "postdown")" = "postdown" ]; then
-		ebegin "Running postdown"
-		eindent
-		postdown
-		eoutdent
-	fi
-
-	return 0
-}

init.d/netmount.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -10,10 +10,9 @@ description="Mounts network shares, other than NFS, according to /etc/fstab."
 depend()
 {
 	config /etc/fstab
-	need net
 	use afc-client amd autofs openvpn
 	use dns
-	keyword -jail -prefix -vserver
+	keyword -jail -prefix -vserver -lxc
 }
 
 start()

init.d/network.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -223,15 +223,6 @@ start()
 
 	einfo "Starting network"
 	routeflush
-	if [ "$RC_UNAME" = "Linux" ]; then
-		ifconfig lo 127.0.0.1 netmask 255.0.0.0 || cr=1
-		route add -net 127.0.0.0 netmask 255.0.0.0 \
-			gw 127.0.0.1 reject 2>/dev/null
-	else
-		ifconfig lo0 127.0.0.1 netmask 255.0.0.0 || cr=1
-		route -q add -inet 127.0.0.0 -netmask 255.0.0.0 \
-			127.0.0.1 -reject || cr=1
-	fi
 	eindent
 	for int in $(interfaces); do
 		local func= cf=
@@ -323,13 +314,17 @@ stop()
 	# Don't stop the network at shutdown.
  	# We don't use the noshutdown keyword so that we are started again
 	# correctly if we go back to multiuser.
-	yesno ${shutdown_network:-YES} && yesno $RC_GOINGDOWN && return 0
+	yesno ${keep_network:-YES} && yesno $RC_GOINGDOWN && return 0
 
 	local int= intv= cmd= downcmd= r=
 	einfo "Stopping network"
 	routeflush
 	eindent
 	for int in $(reverse $(interfaces u)); do
+		case "$int" in
+			lo|lo0) continue ;;
+			*) ;;
+		esac
 		intv=$(shell_var "$int")
 		eval downcmd=\$ifdown_$intv
 		eval cmd=\$ip_$intv

init.d/newsyslog.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/nscd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/numlock.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/pf.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/powerd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/procfs.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -31,7 +31,7 @@ start()
 				ebegin "Loading custom binary format handlers"
 				fmts=$(grep -hsv -e '^[#;]' -e '^[[:space:]]*$' \
 					/run/binfmt.d/*.conf \
-					@SYSCONFDIR@/binfmt.d/*.conf \
+					/etc/binfmt.d/*.conf \
 					""/usr/lib/binfmt.d/*.conf)
 				if [ -n "${fmts}" ]; then
 					echo "${fmts}" > /proc/sys/fs/binfmt_misc/register

init.d/rarpd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/rc-enabled.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/root.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/rpcbind.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/savecache.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/savecore.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/staticroute.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/swap-blk.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/swap.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/swapfiles.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -21,14 +21,6 @@ start()
 stop()
 {
 	ebegin "Deactivating additional swap space"
-
-	# Try to unmount all tmpfs filesystems not in use, else a deadlock may
-	# occur. As $RC_SVCDIR may also be tmpfs we cd to it to lock it
-	# fixme: Do we need this here since we are only unmounting swap files
-	# and loopback swap?
-	cd "$RC_SVCDIR"
-	umount -a -t tmpfs 2>/dev/null
-
 	case "$RC_UNAME" in
 		Linux)
 			if [ -e /proc/swaps ]; then

init.d/swclock.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -17,7 +17,7 @@ start()
 {
 	ebegin "Setting the local clock based on last shutdown time"
 	if ! swclock 2> /dev/null; then
-	swclock --warn @PREFIX@/sbin/runscript
+	swclock --warn @SBINDIR@/runscript
 	fi
 	eend $?
 }

init.d/syscons.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/sysctl.BSD.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/sysctl.Linux.in

@@ -5,7 +5,7 @@
 depend()
 {
 	before bootmisc logger
-	keyword -lxc -prefix -vserver
+	keyword -lxc -vserver
 }
 
 start()
@@ -15,6 +15,14 @@ start()
 	ebegin "Configuring kernel parameters"
 	eindent
 
+	# default sysctl System V max shared memory to 1/4 of RAM:
+	mem_bytes=`awk '/MemTotal:/ { printf "%0.f",$2 * 1024}' /proc/meminfo`
+	mem_max=`expr $mem_bytes / 4`
+	page_size=`getconf PAGE_SIZE`
+	shmall=`expr $mem_bytes / $page_size`
+	sysctl kernel.shmmax=$mem_max > /dev/null
+	sysctl kernel.shmall=$shmall > /dev/null
+
 	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
 		if [ -r "$conf" ]; then
 			vebegin "applying $conf"

init.d/sysfs.in

@@ -1,9 +1,11 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
 description="Mount the sys filesystem."
 
+sysfs_opts=nodev,noexec,nosuid
+
 depend()
 {
 	keyword -lxc -prefix -vserver
@@ -23,7 +25,7 @@ mount_sys()
 
 	ebegin "Mounting /sys"
 	if ! fstabinfo --mount /sys; then
-		mount -n -t sysfs -o noexec,nosuid,nodev sysfs /sys
+		mount -n -t sysfs -o ${sysfs_opts} sysfs /sys
 	fi
 	eend $?
 }
@@ -35,7 +37,7 @@ mount_misc()
 		! mountinfo -q /sys/kernel/security; then
 		if grep -qs securityfs /proc/filesystems; then
 			ebegin "Mounting security filesystem"
-			mount -n -t securityfs -o nodev,noexec,nosuid \
+			mount -n -t securityfs -o ${sysfs_opts} \
 				securityfs /sys/kernel/security
 			eend $?
 		fi
@@ -45,8 +47,7 @@ mount_misc()
 	if [ -d /sys/kernel/debug ] && ! mountinfo -q /sys/kernel/debug; then
 		if grep -qs debugfs /proc/filesystems; then
 			ebegin "Mounting debug filesystem"
-			mount -n -t debugfs -o nodev,noexec,nosuid \
-				debugfs /sys/kernel/debug
+			mount -n -t debugfs -o ${sysfs_opts} debugfs /sys/kernel/debug
 			eend $?
 		fi
 	fi
@@ -55,8 +56,7 @@ mount_misc()
 	if [ -d /sys/kernel/config ] && ! mountinfo -q /sys/kernel/config; then
 		if grep -qs configfs /proc/filesystems; then
 			ebegin "Mounting config filesystem"
-			mount -n -t configfs -o  nodev,noexec,nosuid \
-				configfs /sys/kernel/config
+			mount -n -t configfs -o  ${sysfs_opts} configfs /sys/kernel/config
 			eend $?
 		fi
 	fi
@@ -65,11 +65,36 @@ mount_misc()
 	if [ -d /sys/fs/cgroup ] && ! mountinfo -q /sys/fs/cgroup; then
 		if grep -qs cgroup /proc/filesystems; then
 			ebegin "Mounting cgroup filesystem"
-			local opts="nodev,noexec,nosuid,mode=755,size=${rc_cgroupsize:-10m}"
+			local opts="${sysfs_opts},mode=755,size=${rc_cgroupsize:-10m}"
 			mount -n -t tmpfs -o ${opts} cgroup_root /sys/fs/cgroup
 			eend $?
 		fi
 	fi
+
+	# set up kernel support for fusectl
+	if [ -d /sys/fs/fuse/connections ] \
+		&& ! mountinfo -q /sys/fs/fuse/connections; then
+		if grep -qs fusectl /proc/filesystems; then
+			ebegin "Mounting fuse control filesystem"
+			mount -n -t fusectl -o ${sysfs_opts} \
+				fusectl /sys/fs/fuse/connections
+			eend $?
+		fi
+	fi
+
+	# setup up kernel support for efivarfs
+	# slightly complicated, as if it's build as a module but NOT yet loaded,
+	# it will NOT appear in /proc/filesystems yet
+	if [ -d /sys/firmware/efi/efivars ] \
+		&& ! mountinfo -q /sys/firmware/efi/efivars; then
+		modprobe -q efivarfs
+		if grep -qs efivarfs /proc/filesystems; then
+			ebegin "Mounting efivarfs filesystem"
+			mount -n -t efivarfs -o ${sysfs_opts} \
+				efivarfs /sys/firmware/efi/efivars
+			eend $?
+		fi
+	fi
 }
 
 mount_cgroups()
@@ -79,7 +104,7 @@ mount_cgroups()
 	local agent="@LIBEXECDIR@/sh/cgroup-release-agent.sh"
 	mkdir /sys/fs/cgroup/openrc
 	mount -n -t cgroup \
-		-o none,nodev,noexec,nosuid,name=openrc,release_agent="$agent" \
+		-o none,${sysfs_opts},name=openrc,release_agent="$agent" \
 		openrc /sys/fs/cgroup/openrc
 	echo 1 > /sys/fs/cgroup/openrc/notify_on_release
 
@@ -87,7 +112,7 @@ mount_cgroups()
 	while read name hier groups enabled rest; do
 		case "${enabled}" in
 			1)	mkdir /sys/fs/cgroup/${name}
-				mount -n -t cgroup -o nodev,noexec,nosuid,${name} \
+				mount -n -t cgroup -o ${sysfs_opts},${name} \
 					${name} /sys/fs/cgroup/${name}
 				;;
 		esac

init.d/syslogd.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/termencoding.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2008-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/tmpfiles.dev.in

@@ -0,0 +1,21 @@
+#!@SBINDIR@/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Released under the 2-clause BSD license.
+
+description="set up tmpfiles.d entries"
+
+depend()
+{
+	use dev-mount
+	before dev
+	keyword -prefix -vserver
+}
+
+start()
+{
+	ebegin "setting up tmpfiles.d entries for /dev"
+	@LIBEXECDIR@/sh/tmpfiles.sh --prefix=/dev --create --remove \
+		${tmpfiles_opts}
+	eend $?
+	return 0
+}

init.d/tmpfiles.setup.in

@@ -0,0 +1,19 @@
+#!@SBINDIR@/runscript
+# Copyright 1999-2012 Gentoo Foundation
+# Released under the 2-clause BSD license.
+
+description="set up tmpfiles.d entries"
+
+depend()
+{
+	need localmount
+}
+
+start()
+{
+	ebegin "setting up tmpfiles.d entries"
+	@LIBEXECDIR@/sh/tmpfiles.sh --exclude-prefix=/dev --create --remove \
+		${tmpfiles_opts}
+	eend $?
+	return 0
+}

init.d/tmpfilesd.boot.in

@@ -1,18 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright 1999-2012 Gentoo Foundation
-# Released under the 2-clause BSD license.
-
-description="Create tmpfiles.d entries (boot)"
-
-depend()
-{
-	need localmount
-}
-
-start()
-{
-	ebegin "Creating ${description#Create }"
-	@LIBEXECDIR@/sh/tmpfiles.sh --create ${tmpfiles_opts}
-	eend $?
-	return 0
-}

init.d/tmpfilesd.sysinit.in

@@ -1,20 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright 1999-2012 Gentoo Foundation
-# Released under the 2-clause BSD license.
-
-description="Create tmpfiles.d entries (sysinit)"
-
-depend()
-{
-	# Convert to 'need dev' when the new udev is ready, for OpenRC 0.11
-	#need dev-mount
-	use dev
-}
-
-start()
-{
-	ebegin "Creating ${description#Create }"
-	@LIBEXECDIR@/sh/tmpfiles.sh --create ${tmpfiles_opts}
-	eend $?
-	return 0
-}

init.d/ttys.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/urandom.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/wscons.in

@@ -1,4 +1,4 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2008-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

local.d/README

@@ -7,3 +7,8 @@ executable and it has a .stop extension, it will be run when the local
 service is stopped.
 
 All files are processed in lexical order.
+
+Keep in mind that files in this directory are processed sequencially,
+and the local service is not considered started or stopped until
+everything is processed, so if you have a process which takes a long
+time to run, it can delay your boot or shutdown processing.

man/Makefile

@@ -2,7 +2,7 @@ MAN3=		einfo.3 \
 		rc_config.3 rc_deptree.3 rc_find_pids.3 rc_plugin_hook.3 \
 		rc_runlevel.3 rc_service.3 rc_stringlist.3
 MAN8=		rc-service.8 rc-status.8 rc-update.8 rc.8 runscript.8 \
-		start-stop-daemon.8
+		service.8 start-stop-daemon.8
 
 # Handy macro to create symlinks
 # This does rely on correctly formatting our manpages!

man/einfo.3

@@ -105,7 +105,8 @@ and
 respectively, but only work when
 .Va EINFO_VERBOSE
 is true. You can also make the
-.Fn einfo
+.Fn einfo ,
+.Fn ewarn ,
 and
 .Fn ebegin
 functions silent by setting
@@ -184,6 +185,12 @@ when set to true makes the
 and
 .Fn einfon
 family of functions quiet, so nothing is printed.
+.Va EERROR_QUIET
+when set to true makes the
+.Fn eerror
+and
+.Fn eerrorn
+family of functions quiet, so nothing is printed.
 .Pp
 .Va EINFO_VERBOSE
 when set to true makes the

man/rc-status.8

@@ -46,7 +46,7 @@ Show all runlevels and their services.
 List all services that have crashed.
 .It Fl l , -list
 List all defined runlevels.
-.It fl r , -runlevel
+.It Fl r , -runlevel
 Print the current runlevel name.
 .It Fl s , -servicelist
 Show all services.

man/rc.8

@@ -29,16 +29,17 @@
 .Nd stops and starts services for the specified runlevel
 .Sh SYNOPSIS
 .Nm
+.Op Fl n , -no-stop
 .Op Fl o , -override
 .Op Ar runlevel
 .Sh DESCRIPTION
 .Nm
-first stops any services that are not for the runlevel and then starts any
-services in the runlevel and from stacked runlevels added by
+first stops any services that are not in the specified runlevel unless
+--no-stop is specified, then starts any services in the runlevel and
+stacked runlevels added by
 .Nm rc-update
 that are not currently started.
-If no runlevel is specified then we use the current runlevel the system
-is currently in.
+If no runlevel is specified, we use the current runlevel.
 .Pp
 There are some special runlevels that you should be aware of:
 .Bl -tag -width "shutdown"

man/runscript.8

@@ -60,9 +60,12 @@ First we ensure that any services that depend on us are stopped. If any
 services that need us fail to stop then we exit with a suitable error,
 otherwise call the supplied stop function if it exists.
 .It Ar restart
-Stop and start the service, including dependencies.
+Stops and starts the service, including dependencies. This cannot be
+overridden. See the description of the RC_CMD variable below for the
+method to make your service behave differently when restart is being
+executed.
 .It Ar status
-Show the status of the service. The return code matches the status, with the
+Shows the status of the service. The return code matches the status, with the
 exception of "started" returning 0 to match standard command behaviour.
 .It Ar zap
 Resets the service state to stopped and removes all saved data about the
@@ -85,8 +88,8 @@ Output from any non OpenRC commands is not affected.
 .It Fl v , -verbose
 Turns on any extra informational output the service generates.
 .It Fl Z , -dry-run
-Shows what services would be stopped and/or started without actually starting
-or stopping them.
+Shows which services would be stopped and/or started without actually stopping
+or starting them.
 .El
 .Pp
 The following variables affect the service script:
@@ -153,6 +156,9 @@ The service will start after these services and stop before these services.
 The service will start before these services and stop after these services.
 .It Ic provide
 We provide this virtual service. For example, named provides dns.
+Virtual services take precedence over real services, so it is highly
+recommended that you do not have a real service that has the same name
+as a virtual service.
 .It Ic config
 We should recalculate our dependencies if the listed files have changed.
 .It Ic keyword
@@ -359,7 +365,8 @@ offset. Otherwise it is undefined.
 The result of `uname -s`.
 .It Va RC_CMD
 This contains the name of the command the service script is executing, such
-as start, stop, restart etc.
+as start, stop, restart etc. One example of using this is to make a
+service script behave differently when restart is being executed.
 .El
 .Sh FILES
 .Pp
@@ -464,7 +471,7 @@ start_pre()
 		# stop_post.
 	fi
     # Ensure that our dirs are correct
-    checkpath --dir --owner foo:foo --mode 0664 \\
+    checkpath --directory --owner foo:foo --mode 0775 \\
 	/var/run/foo /var/cache/foo
 }
 

man/service.8

@@ -0,0 +1 @@
+.so rc-service.8

mk/net.mk

@@ -0,0 +1 @@
+MKNET?= no