Pass ncurses cflags to build

Fixes #25
Note from William Hubbs:
The original patch overwrote CFLAGS. I modified this patch to add the
ncurses cflags to CPPFLAGS instead of overwriting CFLAGS.

FEATURE-REMOVAL-SCHEDULE

@@ -5,29 +5,9 @@ removed, it should also be removed from this file.
 
 ---------------------------
 
-What: oldnet ADSL rp-pppoe mode
-
-When: undecided
-
-Why: Replaced by the oldnet PPP module
-
-Who:  Robin H. Johnson <robbat2@gentoo.org>
-
----------------------------
-
-What: oldnet /etc/conf.d/wireless
-
-When: undecided
-
-Why: All configuration moved to /etc/conf.d/net
-
-Who:  Robin H. Johnson <robbat2@gentoo.org>
-
----------------------------
-
 What: Service pause action
 
-When: Removed already, compatbility warning in place.
+When: 1.0
 
 Why: ...
 
@@ -35,9 +15,9 @@ Who:
 
 ---------------------------
 
-What: Service --startas, --chuid , --oknodo
+What: start-stop-daemon options --startas, --chuid , --oknodo
 
-When: undecided
+When: 1.0
 
 Why: Obsolete or replaced by other options.
 	 --startas => use --name or --exec
@@ -47,3 +27,46 @@ Why: Obsolete or replaced by other options.
 Who:
 
 ---------------------------
+
+What: runscript and rc symbolic links
+
+When: 1.0
+
+Why: Deprecated in favor of openrc-run and openrc due to naming
+	 conflicts with other software.
+
+Who:
+
+---------------------------
+
+What: support for the opts variable in service scripts
+
+When: 1.0
+
+Why: Depprecated in favor of extra_commands, extra_started_commands
+	 and extra_stopped_commands.
+
+Who:
+
+---------------------------
+
+What: support for local_start and local_stop
+
+When: 1.0
+
+Why: Depprecated in favor of executable scripts in @SYSCONFDIR@/local.d
+
+Who:
+
+---------------------------
+
+What: the mtab service script
+
+When: make warnings more visible in 1.0, remove in 2.0
+
+Why: /etc/mtab should be a symbolic link to /proc/self/mounts on modern
+	 Linux systems
+
+Who:
+
+---------------------------

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.12.4
+VERSION=	0.13.2
 PKG=		${NAME}-${VERSION}

NEWS

@@ -0,0 +1,44 @@
+OpenRC NEWS
+
+This file will contain a list of notable changes for each release.
+
+OpenRC-0.13.2
+=============
+
+A chroot variable has been added to the service script variables.
+This fixes the support for running a service in a chroot.
+This is documented in man 8 openrc-run.
+
+The netmount service now mounts nfs file systems.
+This change was made to correct a fix for an earlier bug.
+
+OpenRC-0.13
+===========
+
+/sbin/rc was renamed to /sbin/openrc and /sbin/runscript was renamed to
+/sbin/openrc-run due to naming conflicts with other software.
+
+Backward compatible symbolic links are currently in place so your
+system will keep working if you are using the old names; however, it is
+strongly advised that you migrate to the new names because the symbolic
+links will be removed in the future.
+Warnings have been added to assist with this migration; however, due to the
+level of noise they produce, they only appear in verbose mode in this release.
+
+The devfs script now handles the initial mounting and setup of the
+/dev directory. If /dev has already been mounted by the kernel or an
+initramfs, devfs will remount /dev with the correct mount options
+instead of mounting a second /dev over the existing mount point.
+
+It attempts to mount /dev from fstab first if an entry exists there. If
+it doesn't it attempts to mount devtmpfs if it is configured in the
+kernel. If not, it attempts to mount tmpfs.
+If none of these is available, an error message is displayed and static
+/dev is assumed.
+
+OpenRC-0.12
+===========
+
+The net.* scripts, originally from Gentoo Linux, have
+been removed. If you need these scripts, look for a package called
+netifrc, which is maintained by them.

README

@@ -57,10 +57,6 @@ init.d.misc is not installed by default as the scripts will need
 tweaking on a per distro basis. They are also non essential to the operation
 of the system.
 
-As of OpenRC-0.12, the net.* scripts, originally from Gentoo Linux, have
-been removed. If you need these scripts, look for a package called
-netifrc, which is maintained by them.
-
 Reporting Bugs
 --------------
 Since Gentoo Linux is hosting OpenRC development, Bugs should go to
@@ -68,25 +64,3 @@ the Gentoo Bugzilla:
 	http://bugs.gentoo.org/
 They should be filed under the "Gentoo Hosted Projects" product and
 the "openrc" component.
-
-
-History - by Roy Marples
-------------------------
-I became a Gentoo/Linux developer in 2004 and wrote the modular network
-scripts for the Gentoo baselayout package. baselayout is a collection of
-bash scripts to bring up your computer and its services.
-Then towards the end of 2005 I found myself as the primary maintainer
-for baselayout.
-
-At the start of 2007, baselayout-2 is announced to the world, re-writing the
-core of baselayout in C and allowing POSIX sh init scripts instead of
-forcing the use of bash. By Mid 2007 I have re-written everything, including
-init scripts, and alpha and pre baselayout-2 snapshots where put into Gentoo.
-Towards the end of 2007 I retired as a Gentoo developer for reasons I won't
-go into here. baselayout-2 was still in the pre stage, and aside from the
-fbsd users, it was masked everywhere. However, I also desired to keep the
-baselayout-2 project alive, but outside of Gentoo and into other projects
-such as FreeBSD.
-
-As such, the Gentoo Council have allowed the creation of OpenRC under the
-2 clause BSD license, managed by me as an external project.

README.busybox

@@ -8,21 +8,24 @@ counterparts. Since it is possible to configure busybox to not include
 these applets or to prefer the standalone counterparts, OpenRC does not
 attempt to support the busybox applets.
 
-All of these apply to busybox 1.20.2, which is the current version of
-busybox as of this writing.
+For now, it is recommended that you disable the following busybox
+configuration settings for best results with OpenRC.
 
-1. The start-stop-daemon applet is not compatible with start-stop-daemon
-in OpenRC. Please make sure CONFIG_START_STOP_DAEMON is not set to y in
-the configuration file you use to build busybox.
+CONFIG_START_STOP_DAEMON -- The start-stop-daemon applet is not compatible with
+start-stop-daemon in OpenRC.
 
-2. The -O option for the mount applet does not support the [no]_netdev
-options from util-linux for handling network file systems.
+CONFIG_MOUNT -- The mount applet does not support the -O [no]_netdev options to
+skip over or include network file systems when the -a option is present.
 
-3. The umount applet does not support the -O option from util-linux.
+CONFIG_UMOUNT -- The umount applet does not support the -O option along with -a.
 
-4. The swapon applet does not support the -e option from util-linux.
+CONFIG_SWAPONOFF -- The swapon applet does not support the -e option
+or recognize the nofail option in fstab.
 
-5. the setfont applet does not support the -u option from kbd.
+CONFIG_SETFONT -- The setfont applet does not support the -u option from kbd.
+
+CONFIG_IP -- The ip applet  doesn't support the "scope" modifier for
+"ip route add" and "ip address add".
 
 There is work to get most of these supported by busybox, so this file
 will be updated as things change.

README.history

@@ -0,0 +1,55 @@
+This history of OpenRC was written by Daniel Robbins, Roy Marples, William
+Hubbs and others.
+
+The Gentoo modular init scripts were developed by Daniel Robbins for Gentoo
+Linux 1.0_rc6 during most of 2001 and released in September 2001. After their
+development, the dependency-based init script system was maintained by a
+number of senior developers, starting with Azarah (Martin Schlemmer), with
+migration to the new init system assisted by Woodchip (Donnie Davies) who
+converted all ebuild init scripts to work with the new system. As Grant
+Goodyear notes: 
+
+"My recollection is that one of woodchip's more impressive early feats
+was the complete replacement of all of the init scripts in Portage
+for Gentoo Linux 1.0_rc6. Through 1.0_rc5 Gentoo had used fairly
+standard rc scripts modified from Stampede Linux, but for 1.0_rc6 Daniel
+Robbins (drobbins) and Martin Schlemmer (azarah) had created a new
+dependency-based init script system that is still used today. Within a
+span of days Donny rewrote every single init script in the Portage tree
+and committed new masked packages to await the release of 1.0_rc6. Thanks to
+woodchip (and drobbins and azarah, of course) the
+transition to the new init scripts was nearly painless." [1] 
+
+Roy Marples became a Gentoo/Linux developer in 2004 and wrote the modular
+network scripts for the Gentoo baselayout package. Towards the end of 2005,
+he became the primary maintainer for baselayout and the init scripts. 
+
+At the start of 2007, He announced the ongoing development of
+baselayout-2, containing a rewritten core coded in C and allowing POSIX sh
+init scripts instead of forcing the use of bash. By mid 2007, He had
+re-implemented the Gentoo init script design created by Daniel Robbins,
+using an entirely new code base. Alpha and pre-release baselayout-2
+snapshots were added to Gentoo's Portage tree as an optional component.
+
+Toward the end of 2007, Roy retired as a Gentoo developer.
+Baselayout-2 was still in the pre stage, and aside from the gentoo-fbsd
+users, it was masked. However, He desired to keep the baselayout-2
+project moving forward as an independent project. The Gentoo Council
+permitted Him to release OpenRC under the 2-clause BSD license,
+managed by him as an external project. 
+
+Around mid-2010, Roy decided to no longer maintain OpenRC. At this
+point, he transferred development back to Gentoo.
+
+William Hubbs, and several other Gentoo developers,  started working on
+OpenRC around this point and brought OpenRC-0.8.x to Gentoo Linux's stable
+tree in 2011.
+
+In 2013 the OpenRC team became independent from Gentoo again and moved primary
+development to github.
+
+Daniel Robbins continues to maintain an independent, forked
+version of OpenRC for Funtoo Linux, which includes a Funtoo-specific network
+configuration system. 
+
+[1] http://www.gentoo.org/news/en/gwn/20040426-newsletter.xml

conf.d/Makefile

@@ -15,7 +15,7 @@ include ${MK}/os.mk
 
 CONF-FreeBSD=	ipfw moused powerd rarpd savecore syscons
 
-CONF-Linux=	consolefont dmesg hwclock keymaps killprocs modules
+CONF-Linux=	consolefont devfs dmesg hwclock keymaps killprocs modules
 
 CONF-NetBSD=	moused rarpd savecore
 

conf.d/devfs

@@ -0,0 +1,8 @@
+# OpenRC will attempt each of the following in succession to mount /dev.
+#
+# 1. If there is an entry for /dev in fstab, it will be used.
+# 2. If devtmpfs is defined in the kernel, it will be used.
+# 3. If tmpfs is defined in the kernel, it will be used.
+#
+# Set this to yes if you do not want OpenRC to attempt to mount /dev.
+# skip_mount_dev="NO"

conf.d/hwclock

@@ -7,8 +7,8 @@ clock="UTC"
 # If you want the hwclock script to set the system time (software clock)
 # to match the current hardware clock during bootup, leave this
 # commented out.
-# However, you can set this to "NO" ifyou are running a modern kernel
-# with CONFIG_RTC_HCTOSYS set to y and your hardware clock set to UTC.
+# However, you can set this to "NO" if you are running a modern kernel
+# and using NTP to synchronize your system clock.
 #clock_hctosys="YES"
 
 # If you do not want to set the hardware clock to the current system

conf.d/keymaps

@@ -18,6 +18,6 @@ extended_keymaps=""
 # For a list of valid sets, run `dumpkeys --help`
 dumpkeys_charset=""
 
-# Some fonts map AltGr-E to the currency symbol ¤ instead of the Euro €
+# Some fonts map AltGr-E to the currency symbol instead of the Euro.
 # To fix this, set to "yes"
 fix_euro="NO"

conf.d/network.GNU-kFreeBSD.in

@@ -0,0 +1,4 @@
+
+# You can assign a default route
+#defaultroute="192.168.0.1"
+#defaultroute6="2001:a:b:c"

conf.d/network.GNU.in

@@ -0,0 +1,4 @@
+
+# You can assign a default route
+#defaultroute="gw 192.168.0.1"
+#defaultroute6="gw 2001:a:b:c"

conf.d/staticroute.GNU-kFreeBSD.in

@@ -0,0 +1,5 @@
+# Separate multiple routes using ; or new lines.
+
+# Example static routes. See route(8) for syntax.
+#staticroute="net 192.168.0.0 10.73.1.1 netmask 255.255.255.0
+#net 192.168.1.0 10.73.1.1 netmask 255.255.255.0"

conf.d/staticroute.GNU.in

@@ -0,0 +1,7 @@
+# Separate multiple routes using ; or new lines.
+# /etc/route.conf(5) takes precedence over this configuration.
+
+# Example static routes. See route(8) for syntax.
+# FIXME: "net ..." not supported
+#staticroute="net 192.168.0.0 -netmask 255.255.255.0 --address 10.73.1.1
+#net 192.168.1.0 -netmask 255.255.255.0 --address 10.73.1.1"

etc/rc.conf.GNU

@@ -0,0 +1,14 @@
+##############################################################################
+# GNU/Hurd SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on GNU/Hurd:
+# ""        - nothing special
+# "subhurd" - Hurd subhurds (to be checked)
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+# This is the number of tty's used in most of the rc-scripts (like
+# consolefont, numlock, etc ...)
+#rc_tty_number=6?

etc/rc.conf.in

@@ -51,6 +51,10 @@
 # The default value is: /var/log/rc.log
 #rc_log_path="/var/log/rc.log"
 
+# If you want verbose output for OpenRC, set this to yes. If you want
+# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
+#rc_verbose=no
+
 # By default we filter the environment for our running scripts. To allow other
 # variables through, add them here. Use a * to allow all variables through.
 #rc_env_allow="VAR1 VAR2"
@@ -73,6 +77,10 @@
 #rc_crashed_stop=NO
 #rc_crashed_start=YES
 
+# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
+# output.
+#rc_nocolor=NO
+
 ##############################################################################
 # MISC CONFIGURATION VARIABLES
 # There variables are shared between many init scripts
@@ -86,7 +94,7 @@
 
 # Below is the default list of network fstypes.
 #
-# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
 # nfs nfs4 ocfs2 shfs smbfs
 #
 # If you would like to add to this list, you can do so by adding your

init.d.misc/avahi-dnsconfd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/avahid.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/dbus.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/dhcpcd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/dnsmasq.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/hald.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/named.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/ntpd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/openvpn.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -53,7 +53,7 @@ start_pre()
 			eend $?
 		fi
 	else
-		if type kldload >/dev/null 2>&1; then
+		if command -v kldload >/dev/null 2>&1; then
 			# Hammer the modules home by default
 			sysctl -a | grep -q '\.tun\.' || kldload if_tun
 			sysctl -a | grep -q '\.tap\.' || kldload if_tap

init.d.misc/polkitd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/sshd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d.misc/wpa_supplicant.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/.gitignore

@@ -3,9 +3,8 @@ fsck
 hostname
 local
 localmount
+loopback
 moused
-net.lo
-net.lo0
 netmount
 network
 root
@@ -41,4 +40,5 @@ syslogd
 termencoding
 ttys
 wscons
+tmpfiles.dev
 tmpfiles.setup

init.d/adjkerntz.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/bootmisc.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -6,7 +6,7 @@ depend()
 {
 	need localmount
 	before logger
-	after clock sysctl
+	after clock root sysctl
 	keyword -prefix -timeout
 }
 
@@ -68,7 +68,7 @@ cleanup_var_run_dir()
 	do
 		# Clean stale sockets
 		if [ -S "$x" ]; then
-			if type fuser >/dev/null 2>&1; then
+			if command -v fuser >/dev/null 2>&1; then
 				fuser "$x" >/dev/null 2>&1 || rm -- "$x"
 			else
 				rm -- "$x"
@@ -117,7 +117,7 @@ migrate_to_run()
 
 clean_run()
 {
-	[ "$RC_SYS" = VSERVER ] && return 0
+	[ "$RC_SYS" = VSERVER -o "$RC_SYS" = LXC ] && return 0
 	local dir
 	dir=$(mktemp -d)
 	mount --bind / $dir
@@ -129,7 +129,9 @@ clean_run()
 start()
 {
 	# Remove any added console dirs
-	rm -rf "$RC_LIBEXECDIR"/console/*
+	if checkpath -W "$RC_LIBEXECDIR"; then
+		rm -rf "$RC_LIBEXECDIR"/console/*
+	fi
 
 	local logw=false runw=false extra=
 	# Ensure that our basic dirs exist

init.d/consolefont.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/devd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/devdb.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/devfs.in

@@ -1,21 +1,79 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
-description="Mount system critical filesystems in /dev."
+description="Set up the /dev directory"
 
-depend() {
-	use dev-mount
+depend()
+{
+	provide dev-mount
 	before dev
 	keyword -prefix -vserver -lxc
 }
 
-start() {
+mount_dev()
+{
+	local action=--mount devfstype msg=Mounting
+	# Some devices require exec, Bug #92921
+	local mountopts="exec,nosuid,mode=0755"
+	if yesno ${skip_mount_dev:-no} ; then
+		einfo "/dev will not be mounted due to user request"
+		return 0
+	fi
+	if mountinfo -q /dev; then
+		action=--remount
+		mountopts="remount,$mountopts"
+		msg=Remounting
+	fi
+	if fstabinfo -q /dev; then
+		ebegin "$msg /dev according to @SYSCONFDIR@/fstab"
+		fstabinfo -q $action /dev
+		eend $?
+		return 0
+	fi
+	if grep -q devtmpfs /proc/filesystems; then
+		devfstype=devtmpfs
+		mountopts="$mountopts,size=10M"
+	elif grep -q tmpfs /proc/filesystems; then
+		devfstype=tmpfs
+		mountopts="$mountopts,size=10M"
+	fi
+	if [ -n "$devfstype" ]; then
+		ebegin "$msg $devfstype on /dev"
+		mount -n -t $devfstype -o $mountopts dev /dev
+		eend $?
+	else
+		ewarn "This kernel does not have devtmpfs or tmpfs support, and there"
+		ewarn "is no entry for /dev in fstab."
+		ewarn "This means /dev will not be mounted."
+		ewarn "To avoid this message, set CONFIG_DEVTMPFS or CONFIG_TMPFS to y"
+		ewarn "in your kernel configuration or see @SYSCONFDIR@/conf.d/devfs"
+	fi
+	return 0
+}
+
+seed_dev()
+{
+	# Seed /dev with some things that we know we need
+
+	# creating /dev/console, /dev/tty and /dev/tty1 to be able to write
+	# to $CONSOLE with/without bootsplash before udevd creates it
+	[ -c /dev/console ] || mknod -m 600 /dev/console c 5 1
+	[ -c /dev/tty1 ] || mknod -m 620 /dev/tty1 c 4 1
+	[ -c /dev/tty ] || mknod -m 666 /dev/tty c 5 0
+
+	# udevd will dup its stdin/stdout/stderr to /dev/null
+	# and we do not want a file which gets buffered in ram
+	[ -c /dev/null ] || mknod -m 666 /dev/null c 1 3
+
+	# so udev can add its start-message to dmesg
+	[ -c /dev/kmsg ] || mknod -m 660 /dev/kmsg c 1 11
+
 	# Mount required stuff as user may not have then in /etc/fstab
 	for x in \
 		"mqueue /dev/mqueue 1777 ,nodev mqueue" \
 		"devpts /dev/pts 0755 ,gid=5,mode=0620 devpts" \
-		"tmpfs /dev/shm 1777 ,nodev shm" \
+		"tmpfs /dev/shm 1777 ,nodev,mode=1777 shm" \
 	; do
 		set -- $x
 		grep -Eq "[[:space:]]+$1$" /proc/filesystems || continue
@@ -34,5 +92,23 @@ start() {
 			eend $?
 		fi
 	done
+}
+
+restorecon_dev()
+{
+	if [ -x /sbin/restorecon ]; then
+		ebegin "Restoring SELinux contexts in /dev"
+		restorecon -rF /dev >/dev/null 2>&1
+		eend $?
+	fi
+
+	return 0
+}
+
+start()
+{
+	mount_dev
+	seed_dev
+	restorecon_dev
 	return 0
 }

init.d/dmesg.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/dumpon.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/encswap.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright 1992-2012 FreeBSD Project
 # Released under the 2-clause BSD license
 

init.d/fsck.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/hostid.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -40,7 +40,7 @@ reset()
 {
 	local uuid= x="[0-9a-f]" y="$x$x$x$x"
 
-	if type kenv >/dev/null 2>&1; then
+	if command -v kenv >/dev/null 2>&1; then
 		uuid=$(kenv smbios.system.uuid 2>/dev/null)
 	fi
 	case "$uuid" in

init.d/hostname.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/hwclock.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -83,22 +83,17 @@ start()
 		fi
 	fi
 
+	# Always set the kernel's time zone.
+	_hwclock --systz $utc_cmd $clock_args
+	: $(( retval += $? ))
+
 	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
 		_hwclock --adjust $utc_cmd
 		: $(( retval += $? ))
 	fi
 
-	# If setting UTC, don't bother to run hwclock when first booting
-	# as that's the default
-	if [ "$PREVLEVEL" != N -o \
-		"$utc_cmd" != --utc -o \
-		-n "$clock_args" ];
-	then
-		if yesno ${clock_hctosys:-YES}; then
-			_hwclock --hctosys $utc_cmd $clock_args
-		else
-			_hwclock --systz $utc_cmd $clock_args
-		fi
+	if yesno ${clock_hctosys:-YES}; then
+		_hwclock --hctosys $utc_cmd $clock_args
 		: $(( retval += $? ))
 	fi
 

init.d/ipfw.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/keymaps.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/killprocs.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/local.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -12,40 +12,73 @@ depend()
 
 start()
 {
-	einfo "Starting local"
+	ebegin "Starting local"
 
-	local file
-	for file in @SYSCONFDIR@/local.d/*.start ; do
-		[ -x "$file" ] && "$file"
+	local file has_errors=0 retval
+	eindent
+	for file in @SYSCONFDIR@/local.d/*.start; do
+		if [ -x "${file}" ]; then
+			vebegin "Executing \"${file}\""
+			"${file}" 2>&1 >/dev/null
+			retval=$?
+			if [ ${retval} -ne 0 ]; then
+				has_errors=1
+			fi
+			veend ${retval} "Execution of \"${file}\" failed."
+		fi
 	done
+	eoutdent
 
-	if type local_start >/dev/null 2>&1; then
-		ewarn "@SYSCONFDIR@/conf.d/local should be removed."
+	if command -v local_start >/dev/null 2>&1; then
+		ewarn "\"@SYSCONFDIR@/conf.d/local\" should be removed."
 		ewarn "Please move the code from the local_start function"
-		ewarn "to scripts with an .start extension"
-		ewarn "in @SYSCONFDIR@/local.d"
+		ewarn "to executable scripts with an .start extension"
+		ewarn "in \"@SYSCONFDIR@/local.d\""
 		local_start
 	fi
 
-	eend 0
+	eend ${has_errors}
+
+	# We have to end with a zero exit code, because a failed execution
+	# of an executable @SYSCONFDIR@/local.d/*.start file shouldn't result in
+	# marking the local service as failed. Otherwise we are unable to
+	# execute any executable @SYSCONFDIR@/local.d/*.stop file, because a failed
+	# marked service cannot be stopped (and the stop function would
+	# actually call the executable @SYSCONFDIR@/local.d/*.stop file(s)).
+	return 0
 }
 
 stop()
 {
-	einfo "Stopping local"
+	ebegin "Stopping local"
 
-	local file
+	local file has_errors=0 retval
+	eindent
 	for file in @SYSCONFDIR@/local.d/*.stop; do
-		[ -x "$file" ] && "$file"
+		if [ -x "${file}" ]; then
+			vebegin "Executing \"${file}\""
+			"${file}" 2>&1 >/dev/null
+			retval=$?
+			if [ ${retval} -ne 0 ]; then
+				has_errors=1
+			fi
+			veend ${retval} "Execution of \"${file}\" failed."
+		fi
 	done
+	eoutdent
 
-	if type local_start >/dev/null 2>&1; then
-		ewarn "@SYSCONFDIR@/conf.d/local should be removed."
+	if command -v local_stop >/dev/null 2>&1; then
+		ewarn "\"@SYSCONFDIR@/conf.d/local\" should be removed."
 		ewarn "Please move the code from the local_stop function"
-		ewarn "to scripts with an .stop extension"
-		ewarn "in @SYSCONFDIR@/local.d"
+		ewarn "to executable scripts with an .stop extension"
+		ewarn "in \"@SYSCONFDIR@/local.d\""
 		local_stop
 	fi
 
-	eend 0
+	eend ${has_errors}
+
+	# An executable @SYSCONFDIR@/local.d/*.stop file which failed with a
+	# non-zero exit status is not a reason to mark this service
+	# as failed, therefore we have to end with a zero exit code.
+	return 0
 }

init.d/localmount.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -59,10 +59,35 @@ stop()
 	no_umounts_r="^($no_umounts_r)$"
 
 	# Flush all pending disk writes now
-	sync; sync
+	sync
 
 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 
+	if [ "$RC_UNAME" = Linux ] && [ -d /sys/fs/aufs ] ; then
+		#if / is aufs we remount it noxino during shutdown
+		if mountinfo -q -f '^aufs$' / ; then
+			mount -o remount,noxino,rw /
+			sync
+		fi
+
+		local aufs_branch aufs_mount_dir aufs_mount_point aufs_si_dir aufs_si_id
+		for aufs_si_dir in /sys/fs/aufs/*; do
+			aufs_mount_dir=${aufs_si_dir#/sys/fs/aufs/}
+			aufs_si_id="$(printf "%s" $aufs_mount_dir | sed 's/_/=/g')"
+			aufs_mount_point="$(mountinfo -o ${aufs_si_id})"
+			for x in $aufs_si_dir/br[0-9][0-9][0-9]; do
+				aufs_branch=$(sed 's/=.*//g' $x)
+				eindent
+				if ! mount -o "remount,del:$aufs_branch" "$aufs_mount_point" > /dev/null 2>&1; then
+					ewarn "Failed to remove branch $aufs_branch from aufs \
+						$aufs_mount_point"
+				fi
+				eoutdent
+				sync
+			done
+		done
+	fi
+
 	# Umount loop devices
 	einfo "Unmounting loop devices"
 	eindent

init.d/loopback.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2013 William Hubbs <w.d.hubbs@gmail.com>
 # Released under the 2-clause BSD license.
 
@@ -13,7 +13,7 @@ start()
 {
 	if [ "$RC_UNAME" = Linux ]; then
 		ebegin "Bringing up network interface lo"
-		if type ip > /dev/null 2>&1; then
+		if command -v ip > /dev/null 2>&1; then
 			ip addr add 127.0.0.1/8 dev lo brd + scope host
 			ip route add 127.0.0.0/8 dev lo scope host
 			ip link set lo up

init.d/mixer.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/modules.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/mount-ro.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -15,7 +15,7 @@ start()
 	local ret=0
 
 	# Flush all pending disk writes now
-	sync; sync
+	sync
 
 	ebegin "Remounting remaining filesystems read-only"
 	# We need the do_unmount function

init.d/moused.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/mtab.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -12,13 +12,16 @@ depend()
 
 start()
 {
-	if [ -L /etc/mtab ]
-	then
-		einfo "Skipping mtab update (mtab is a symbolic link)"
+	if [ -L /etc/mtab ]; then
 		return 0
 	fi
 
 	ebegin "Updating /etc/mtab"
+	vewarn "The support for updating /etc/mtab as a file is"
+	vewarn "deprecated and will be removed in the future."
+	vewarn "Please run the following command as root on your system."
+	vewarn
+	vewarn "ln -snf /proc/self/mounts /etc/mtab"
 	if ! echo 2>/dev/null >/etc/mtab; then
 		ewend 1 "/etc/mtab is not updateable"
 		return 0

init.d/netmount.in

@@ -1,11 +1,8 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
-description="Mounts network shares, other than NFS, according to /etc/fstab."
-# We skip all NFS shares in this script because they require extra
-# daemons to be running on the client in order to work correctly.
-# It is best to allow nfs-utils to handle all nfs shares.
+description="Mounts network shares according to /etc/fstab."
 
 depend()
 {
@@ -19,11 +16,6 @@ start()
 {
 	local x= fs= rc=
 	for x in $net_fs_list $extra_net_fs_list; do
-		case "$x" in
-			nfs|nfs4)
-			continue
-			;;
-		esac
 		fs="$fs${fs:+,}$x"
 	done
 
@@ -46,14 +38,7 @@ stop()
 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 
 	for x in $net_fs_list $extra_net_fs_list; do
-		case "$x" in
-			nfs|nfs4)
-				continue
-				;;
-			*)
-				fs="$fs${fs:+,}$x"
-				;;
-		esac
+		fs="$fs${fs:+,}$x"
 	done
 	if [ -n "$fs" ]; then
 		umount -at $fs || eerror "Failed to simply unmount filesystems"

init.d/network.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -46,7 +46,11 @@ sys_interfaces()
 		local w= rest= i= cmd=$1
 		while read w rest; do
 			i=${w%%:*}
-			[ "$i" != "$w" ] || continue
+			case "$i" in
+				"$w") continue ;;
+				lo|lo0) continue ;;
+				*) ;;
+			esac
 			if [ "$cmd" = u ]; then
 				ifconfig "$i" | grep -q "[ ]*UP" || continue
 			fi

init.d/newsyslog.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/nscd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/numlock.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/pf.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -17,7 +17,7 @@ depend() {
 start()
 {
 	ebegin "Starting $name"
-	if type kldload >/dev/null 2>&1; then
+	if command -v kldload >/dev/null 2>&1; then
 		kldload pf 2>/dev/null
 	fi
 	pfctl -q -F all

init.d/powerd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/procfs.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -61,10 +61,10 @@ start()
 	fi
 
 	# Setup Kernel Support for SELinux
-	if [ -d /selinux ] && ! mountinfo -q /selinux; then
+	if [ -d /sys/fs/selinux ] && ! mountinfo -q /sys/fs/selinux; then
 		if grep -qs selinuxfs /proc/filesystems; then
 			ebegin "Mounting SELinux filesystem"
-			mount -t selinuxfs selinuxfs /selinux
+			mount -t selinuxfs selinuxfs /sys/fs/selinux
 			eend $?
 		fi
 	fi

init.d/rarpd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/rc-enabled.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/root.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/rpcbind.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/savecache.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -13,8 +13,8 @@ start()
 			return 1
 		fi
 	fi
-	if ! checkpath -W "$RC_LIBEXECDIR"; then
-		ewarn "WARNING: ${RC_LIBEXECDIR} is not writable!"
+	if ! checkpath -W "$RC_LIBEXECDIR"/cache; then
+		ewarn "WARNING: ${RC_LIBEXECDIR}/cache is not writable!"
 		if ! yesno "${RC_GOINGDOWN}"; then
 			ewarn "Unable to save deptree cache"
 			return 1

init.d/savecore.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/staticroute.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/swap-blk.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/swap.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/swapfiles.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/swclock.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -17,7 +17,7 @@ start()
 {
 	ebegin "Setting the local clock based on last shutdown time"
 	if ! swclock 2> /dev/null; then
-	swclock --warn @SBINDIR@/runscript
+	swclock --warn @SBINDIR@/openrc-run
 	fi
 	eend $?
 }

init.d/syscons.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/sysctl.BSD.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/sysctl.GNU-kFreeBSD.in

@@ -0,0 +1,31 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+depend()
+{
+	before bootmisc logger
+	keyword -prefix
+}
+
+start()
+{
+	[ -e /etc/sysctl.conf ] || return 0
+	local retval=0 var= comments= conf=
+	ebegin "Configuring kernel parameters"
+	eindent
+	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
+		if [ -r "$conf" ]; then
+			vebegin "applying $conf"
+			while read var comments; do
+				case "$var" in
+				""|"#"*) continue;;
+				esac
+				sysctl -w "$var" >/dev/null || retval=1
+			done < "$conf"
+			veend $retval
+		fi
+	done
+	eoutdent
+	eend $retval "Some errors were encountered"
+}

init.d/sysctl.GNU.in

@@ -0,0 +1,32 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+#FIXME: Modify for GNU/Hurd
+
+depend()
+{
+	before bootmisc logger
+	keyword -prefix
+}
+
+start()
+{
+	[ -e /etc/sysctl.conf ] || return 0
+	local retval=0 var= comments= conf=
+	ebegin "Configuring kernel parameters"
+	eindent
+	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
+		if [ -r "$conf" ]; then
+			vebegin "applying $conf"
+			while read var comments; do
+				case "$var" in
+				""|"#"*) continue;;
+				esac
+				sysctl -w "$var" >/dev/null || retval=1
+			done < "$conf"
+			veend $retval
+		fi
+	done
+	eoutdent
+	eend $retval "Some errors were encountered"
+}

init.d/sysctl.Linux.in

@@ -1,34 +1,16 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
 depend()
 {
 	before bootmisc logger
-	keyword -lxc -prefix -vserver
+	keyword -prefix -vserver
 }
 
 start()
 {
-	local conf= retval=0 err errs
-
 	ebegin "Configuring kernel parameters"
-	eindent
-
-	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
-		if [ -r "$conf" ]; then
-			vebegin "applying $conf"
-			if ! err=$(sysctl -p "$conf" 2>&1 >/dev/null) ; then
-				errs="${errs} ${err}"
-				sysctl -e -p "${conf}" >/dev/null
-			fi
-			veend $? || retval=1
-		fi
-	done
-
-	eoutdent
-	if [ ${retval} -eq 0 ] && [ -n "${errs}" ] ; then
-		ewarn "Unknown keys:${errs}"
-	fi
-	eend $retval "Some errors were encountered: ${errs}"
+	sysctl --system
+	eend $? "Unable to configure some kernel parameters"
 }

init.d/sysfs.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
@@ -99,14 +99,16 @@ mount_misc()
 
 mount_cgroups()
 {
-		mountinfo -q /sys/fs/cgroup || return 0
+	mountinfo -q /sys/fs/cgroup || return 0
 
-	local agent="@LIBEXECDIR@/sh/cgroup-release-agent.sh"
-	mkdir /sys/fs/cgroup/openrc
-	mount -n -t cgroup \
-		-o none,${sysfs_opts},name=openrc,release_agent="$agent" \
-		openrc /sys/fs/cgroup/openrc
-	echo 1 > /sys/fs/cgroup/openrc/notify_on_release
+	if ! mountinfo -q /sys/fs/cgroup/openrc; then
+		local agent="@LIBEXECDIR@/sh/cgroup-release-agent.sh"
+		mkdir /sys/fs/cgroup/openrc
+		mount -n -t cgroup \
+			-o none,${sysfs_opts},name=openrc,release_agent="$agent" \
+			openrc /sys/fs/cgroup/openrc
+		echo 1 > /sys/fs/cgroup/openrc/notify_on_release
+	fi
 
 	yesno ${rc_controller_cgroups:-YES} && [ -e /proc/cgroups ] || return 0
 	while read name hier groups enabled rest; do
@@ -119,6 +121,18 @@ mount_cgroups()
 	done < /proc/cgroups
 }
 
+restorecon_sys()
+{
+	if [ -x /sbin/restorecon ]; then
+		ebegin "Restoring SELinux contexts in /sys"
+		restorecon -F /sys/devices/system/cpu/online >/dev/null 2>&1
+		restorecon -rF /sys/fs/cgroup >/dev/null 2>&1
+		eend $?
+	fi
+
+	return 0
+}
+
 start()
 {
 	local retval
@@ -132,5 +146,8 @@ start()
 		mount_cgroups
 		retval=$?
 	fi
+
+	restorecon_sys
+
 	return $retval
 }

init.d/syslogd.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/termencoding.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2008-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/tmpfiles.dev.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright 1999-2012 Gentoo Foundation
 # Released under the 2-clause BSD license.
 
@@ -14,8 +14,7 @@ depend()
 start()
 {
 	ebegin "setting up tmpfiles.d entries for /dev"
-	@LIBEXECDIR@/sh/tmpfiles.sh --prefix=/dev --create --remove \
-		${tmpfiles_opts}
+	@LIBEXECDIR@/sh/tmpfiles.sh --prefix=/dev --create ${tmpfiles_opts}
 	eend $?
 	return 0
 }

init.d/tmpfiles.setup.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright 1999-2012 Gentoo Foundation
 # Released under the 2-clause BSD license.
 
@@ -12,7 +12,7 @@ depend()
 start()
 {
 	ebegin "setting up tmpfiles.d entries"
-	@LIBEXECDIR@/sh/tmpfiles.sh --exclude-prefix=/dev --create --remove \
+	@LIBEXECDIR@/sh/tmpfiles.sh --exclude-prefix=/dev --create --remove --boot \
 		${tmpfiles_opts}
 	eend $?
 	return 0

init.d/ttys.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/urandom.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

init.d/wscons.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/runscript
+#!@SBINDIR@/openrc-run
 # Copyright (c) 2008-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 

man/Makefile

@@ -1,7 +1,7 @@
 MAN3=		einfo.3 \
 		rc_config.3 rc_deptree.3 rc_find_pids.3 rc_plugin_hook.3 \
 		rc_runlevel.3 rc_service.3 rc_stringlist.3
-MAN8=		rc-service.8 rc-status.8 rc-update.8 rc.8 runscript.8 \
+MAN8=		rc-service.8 rc-status.8 rc-update.8 openrc.8 openrc-run.8 \
 		service.8 start-stop-daemon.8
 
 # Handy macro to create symlinks

man/einfo.3

@@ -105,7 +105,8 @@ and
 respectively, but only work when
 .Va EINFO_VERBOSE
 is true. You can also make the
-.Fn einfo
+.Fn einfo ,
+.Fn ewarn ,
 and
 .Fn ebegin
 functions silent by setting
@@ -184,6 +185,12 @@ when set to true makes the
 and
 .Fn einfon
 family of functions quiet, so nothing is printed.
+.Va EERROR_QUIET
+when set to true makes the
+.Fn eerror
+and
+.Fn eerrorn
+family of functions quiet, so nothing is printed.
 .Pp
 .Va EINFO_VERBOSE
 when set to true makes the

man/openrc-run.8

@@ -22,10 +22,10 @@
 .\" SUCH DAMAGE.
 .\"
 .Dd December 31, 2011
-.Dt RUNSCRIPT 8 SMM
+.Dt openrc-run 8 SMM
 .Os OpenRC
 .Sh NAME
-.Nm runscript
+.Nm openrc-run
 .Nd a means of hooking shell commands into a service
 .Sh SYNOPSIS
 .Nm
@@ -47,7 +47,7 @@ and finally the script itself. At this point
 then runs the command given.
 .Pp
 Commands are defined as shell functions within the script. Here is a list of
-some functions that all runscripts have by default:
+some functions that all scripts have by default:
 .Bl -tag -width "RC_DEFAULTLEVEL"
 .It Ar describe
 Describes what the service does and each command the service defines.
@@ -60,12 +60,12 @@ First we ensure that any services that depend on us are stopped. If any
 services that need us fail to stop then we exit with a suitable error,
 otherwise call the supplied stop function if it exists.
 .It Ar restart
-Stop and start the service, including dependencies. This cannot be
+Stops and starts the service, including dependencies. This cannot be
 overridden. See the description of the RC_CMD variable below for the
 method to make your service behave differently when restart is being
 executed.
 .It Ar status
-Show the status of the service. The return code matches the status, with the
+Shows the status of the service. The return code matches the status, with the
 exception of "started" returning 0 to match standard command behaviour.
 .It Ar zap
 Resets the service state to stopped and removes all saved data about the
@@ -88,8 +88,8 @@ Output from any non OpenRC commands is not affected.
 .It Fl v , -verbose
 Turns on any extra informational output the service generates.
 .It Fl Z , -dry-run
-Shows what services would be stopped and/or started without actually starting
-or stopping them.
+Shows which services would be stopped and/or started without actually stopping
+or starting them.
 .El
 .Pp
 The following variables affect the service script:
@@ -120,6 +120,9 @@ Set this to "true", "yes" or "1" (case-insensitive) to force the daemon into
 the background. This implies the "--make-pidfile" and "--pidfile" option of
 .Xr start-stop-daemon 8
 so the pidfile variable must be set.
+.It Ar chroot
+.Xr start-stop-daemon 8
+will chroot into this path before writing the pid file or starting the daemon.
 .It Ar pidfile
 Pidfile to use for the above defined command.
 .It Ar name
@@ -131,6 +134,12 @@ timeout in seconds or multiple signal/timeout pairs (like SIGTERM/5).
 A list of directories which must exist for the service to start.
 .It Ar required_files
 A list of files which must exist for the service to start.
+.It Ar start_inactive
+Set to yes to have the service marked inactive when it starts. This is
+used along with in_background_fake to support re-entrant services.
+.It Ar in_background_fake
+Space separated list of commands which should always succeed when
+in_background is yes.
 .El
 .Sh DEPENDENCIES
 You should define a
@@ -321,16 +330,36 @@ Mark the service as inactive.
 .Op Fl f , -file
 .Op Fl p , -pipe
 .Op Fl m , -mode Ar mode
-.Op Fl o , owner Ar owner
+.Op Fl o , -owner Ar owner
+.Op Fl W , -writable
+.Op Fl q , -quiet
 .Ar path ...
 .Xc
-Checks to see if the path exists, is of the right type, owned by the right
-people and has the correct access modes. If not, then it corrects the path.
-.It Ic checkpath
-.Op Fl W , -writable
-.Ar path
-.Xc
-checks to see if the path is writable.
+If -d, -f or -p is specified, checkpath checks to see if the path
+exists, is the right type and has the correct owner and access modes. If
+any of these tests fail, the path is created and set up as specified. If
+more than one of -d, -f or -p are specified, the last one will be used.
+
+The argument to -m is a three or four digit octal number. If this option
+is not provided, the value defaults to 0644 for files and 0775 for
+directories.
+
+The argument to -o is a representation of the user and/or group which
+should own the path. The user and group can be represented numerically
+or with names, and are separated by a colon.
+
+The truncate options (-D and -F) cause the directory or file to be
+cleared of all contents.
+
+If -W is specified, checkpath checks to see if the first path given on
+the command line is writable.  This is different from how the test
+command in the shell works, because it also checks to make sure the file
+system is not read only.
+
+Also, the -d, -f or -p options should not be specified along with this option.
+
+The -q option suppresses all informational output. If it is specified
+twice, all error messages are suppressed as well.
 .It Ic yesno Ar value
 If
 .Ar value
@@ -342,8 +371,10 @@ sets the following environment variables for use in the service scripts:
 .Bl -tag -width "RC_DEFAULTLEVEL"
 .It Va RC_SVCNAME
 Name of the service.
+.It Va RC_SERVICE
+Full path to the service.
 .It Va RC_RUNLEVEL
-Current runlevel that rc is in. Note that, in OpenRC, the reboot
+Current runlevel that OpenRC is in. Note that, in OpenRC, the reboot
 runlevel is mapped to the shutdown runlevel. This was done because most
 services do not need to know if a system is shutting down or rebooting.
 If you are writing a service that does need to know this, see the
@@ -367,6 +398,15 @@ The result of `uname -s`.
 This contains the name of the command the service script is executing, such
 as start, stop, restart etc. One example of using this is to make a
 service script behave differently when restart is being executed.
+.It Va RC_GOINGDOWN
+This variable contains YES if the system is going into single user mode
+or shutting down.
+.It Va RC_LIBEXECDIR
+The value of libexecdir which OpenRC was configured with during build
+time.
+.It Va RC_NO_UMOUNTS
+This variable is used by plugins to contain a list of directories which
+should not be unmounted.
 .El
 .Sh FILES
 .Pp
@@ -411,7 +451,7 @@ rc_keyword="!-prefix"
 .Pp
 An example service script for foo.
 .Bd -literal -offset indent
-#!/sbin/runscript
+#!/sbin/openrc-run
 command=/usr/bin/foo
 command_args="${foo_args} --bar"
 pidfile=/var/run/foo.pid
@@ -471,7 +511,7 @@ start_pre()
 		# stop_post.
 	fi
     # Ensure that our dirs are correct
-    checkpath --dir --owner foo:foo --mode 0664 \\
+    checkpath --directory --owner foo:foo --mode 0775 \\
 	/var/run/foo /var/cache/foo
 }
 
@@ -536,7 +576,7 @@ Instead we return 1 to be compliant with Gentoo baselayout.
 Users are encouraged to use the is_newer_than function which returns correctly.
 .Sh SEE ALSO
 .Xr einfo 3 ,
-.Xr rc 8 ,
+.Xr openrc 8 ,
 .Xr rc-status 8 ,
 .Xr rc-update 8 ,
 .Xr rc_plugin_hook 3 ,

man/openrc.8

@@ -22,10 +22,10 @@
 .\" SUCH DAMAGE.
 .\"
 .Dd May 2, 2009
-.Dt RC 8 SMM
+.Dt OPENRC 8 SMM
 .Os OpenRC
 .Sh NAME
-.Nm rc
+.Nm openrc
 .Nd stops and starts services for the specified runlevel
 .Sh SYNOPSIS
 .Nm

man/rc-service.8

@@ -63,7 +63,7 @@ otherwise -1.
 .Fl r , -resolve
 does the same and also prints the full path of the service to stdout.
 .Sh SEE ALSO
-.Xr rc 8 ,
+.Xr openrc 8 ,
 .Xr stdout 3
 .Sh AUTHORS
 .An Roy Marples <roy@marples.name>

man/rc-status.8

@@ -66,7 +66,7 @@ exits 0, except when checking for crashed services and it doesn't find any.
 tries to list services within each runlevel in the presently resolved
 dependency order if the dependency tree is available.
 .Sh SEE ALSO
-.Xr rc 8 ,
+.Xr openrc 8 ,
 .Xr rc-update 8
 .Sh AUTHORS
 .An Roy Marples <roy@marples.name>

man/rc-update.8

@@ -21,7 +21,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd May 2, 2009
+.Dd Jan 13, 2014
 .Dt RC-UPDATE 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -35,6 +35,7 @@
 .Op Ar runlevel ...
 .Nm
 .Op Fl s , -stack
+.Op Fl a , -all
 .Ar delete
 .Ar service
 .Op Ar runlevel ...
@@ -53,7 +54,8 @@ All services must reside in the
 or
 .Pa /usr/local/etc/init.d
 directories.
-They must also conform to the OpenRC runscript standard.
+They must also be standard OpenRC scripts, meaning they must use
+openrc-run.
 .Pp
 .Bl -tag -width "Fl a , -delete service"
 .It Ar add Ar service
@@ -85,8 +87,16 @@ If the
 .Fl s , -stack
 option is given then we either add or remove the runlevel from the runlevel.
 This allows inheritance of runlevels.
+
+If the
+.Fl a, -all
+option is given, we remove the service from all runlevels. This is
+useful, for example, to clean up the dangling symlinks after a service
+is removed.
 .Sh SEE ALSO
-.Xr rc 8 ,
+.Xr openrc 8 ,
+.Xr openrc-run 8 ,
 .Xr rc-status 8
 .Sh AUTHORS
 .An Roy Marples <roy@marples.name>
+.An The OpenRC Team <openrc@gentoo.org>

man/rc_deptree.3

@@ -107,6 +107,6 @@ when done.
 .Xr malloc 3 ,
 .Xr free 3 ,
 .Xr rc_stringlist_free 3 ,
-.Xr runscript 8
+.Xr openrc-run 8
 .Sh AUTHORS
 .An Roy Marples <roy@marples.name>

man/rc_plugin_hook.3

@@ -44,7 +44,7 @@ is set to the name of the runlevel or name of the service.
 Plugins can affect the parent environment by writing NULL separated strings to
 .Va rc_environ_fd .
 .Sh SEE ALSO
-.Xr rc 8 ,
-.Xr runscript 8
+.Xr openrc 8 ,
+.Xr openrc-run 8
 .Sh AUTHORS
 .An Roy Marples <roy@marples.name>

man/rc_service.3

@@ -141,7 +141,7 @@ is lost.
 returns a list of extra commands the
 .Fa service
 supports beyond the default ones. See
-.Nm runscript
+.Nm openrc-run
 for default commands.
 .Pp
 .Fn rc_service_plugable

man/start-stop-daemon.8

@@ -139,7 +139,7 @@ option.
 Modifies the IO scheduling priority of the daemon.
 Class can be 0 for none, 1 for real time, 2 for best effort and 3 for idle.
 Data can be from 0 to 7 inclusive.
-.It Fl N , -nice Ar level
+.It Fl N , -nicelevel Ar level
 Modifies the scheduling priority of the daemon.
 .It Fl 1 , -stdout Ar logfile
 Redirect the standard output of the process to logfile when started with

mk/os-GNU-kFreeBSD.mk

@@ -3,7 +3,9 @@
 
 # Generic definitions
 
+SFX=		.GNU-kFreeBSD.in
+PKG_PREFIX?=	/usr
+
 CPPFLAGS+=	-D_BSD_SOURCE -D_XOPEN_SOURCE=700
 LIBDL=		-Wl,-Bdynamic -ldl
 LIBKVM?=
-include ${MK}/os-BSD.mk

mk/os-GNU.mk

@@ -0,0 +1,8 @@
+# Copyright (c) 2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+SFX=		.GNU.in
+PKG_PREFIX?=	/usr
+
+CPPFLAGS+=	-D_BSD_SOURCE -D_XOPEN_SOURCE=700 -DMAXPATHLEN=4096 -DMAX_PATH=4096
+LIBDL=		-Wl,-Bdynamic -ldl

mk/os-Linux.mk

@@ -6,3 +6,9 @@ PKG_PREFIX?=	/usr
 
 CPPFLAGS+=	-D_BSD_SOURCE -D_XOPEN_SOURCE=700
 LIBDL=		-Wl,-Bdynamic -ldl
+
+ifeq (${MKSELINUX},yes)
+CPPFLAGS+= -DHAVE_SELINUX
+LIBSELINUX= -lselinux
+LDADD += $(LIBSELINUX)
+endif

mk/termcap.mk

@@ -1,11 +1,12 @@
 ifeq (${MKTERMCAP},ncurses)
-	LTERMCAP:=	$(shell pkg-config ncurses --libs 2> /dev/null)
+TERMCAP_CFLAGS:=	$(shell pkg-config ncurses --cflags 2> /dev/null)
+LTERMCAP:=			$(shell pkg-config ncurses --libs 2> /dev/null)
 ifeq ($(LTERMCAP),)
 LIBTERMCAP?=	-lncurses
 else
 LIBTERMCAP?= $(LTERMCAP)
 endif
-CPPFLAGS+=	-DHAVE_TERMCAP
+CPPFLAGS+=	-DHAVE_TERMCAP ${TERMCAP_CFLAGS}
 LDADD+=		${LIBTERMCAP}
 else ifeq (${MKTERMCAP},termcap)
 LIBTERMCAP?=	-ltermcap