Update ChangeLog

X-Gentoo-Bug: 634634
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=634634

.gitignore

@@ -1,4 +1,4 @@
-*.bz2
+*.gz
 
 *.diff
 *.patch

AUTHORS

@@ -0,0 +1,99 @@
+Alessio Ababilov <ilovedevlinux@gmail.com>
+Alexander Berntsen <alexander@plaimi.net>
+Alexander Mezin <mezin.alexander@gmail.com>
+Alexander Tsoy <alexander@tsoy.me>
+Alexander Vershilov <alexander.vershilov@gmail.com>
+Alexander Vershilov <qnikst@gentoo.org>
+Alexander V Vershilov <qnikst@gentoo.org>
+Alexey Shvetsov <alexxy@gentoo.org>
+Alon Bar-Lev <alon.barlev@gmail.com>
+Amadeusz Żołnowski <aidecoe@aidecoe.name>
+Andrew Gregory <andrew.gregory.8@gmail.com>
+Anthony Donnelly <Amzo@archbsd.com>
+Anthony G. Basile <basile@opensource.dyc.edu>
+Anthony G. Basile <blueness@gentoo.org>
+Austin S. Hemmelgarn <ahferroin7@gmail.com>
+Benda Xu <heroxbd@gentoo.org>
+Björn Baumbach <bb@sernet.de>
+Charlie <root@uberlaptop.development.ltl>
+Chris Richards <gizmo@giz-works.com>
+Christian <christian@ch-sc.de>
+Christian Ruppert <idl0r@gentoo.org>
+Christian Wetzig <gentoo@wetzig.de>
+Christopher Head <chead@telus.net>
+Consus <consus@gmx.com>
+Daniel Mierswa <impulze@impulze.org>
+Daniel Robbins <drobbins@funtoo.org>
+Diego Elio Pettenò <flameeyes@flameeyes.eu>
+Diego Elio Pettenò <flameeyes@gmail.com>
+Diego <flameeyes@gentoo.org>
+Dirk Sondermann <ds-gentoo@dyximaq.de>
+Doug Freed <dwfreed@mtu.edu>
+Doug Goldstein <cardoe@cardoe.com>
+Ed Wildgoose <gentoo@wildgooses.com>
+Eray Aslan <eras@gentoo.org>
+Eugeny Shkrigunov <eshkrig@gmail.com>
+Fedja Beader <specing@contact.me.on.irc.freenode.net>
+Flex <frostynova@gmail.com>
+Gabriele Giacone <1o5g4r8o@gmail.com>
+Gary <admin@garyshood.com>
+Gilles Oivier <g.olivier@wanadoo.fr>
+Hank Leininger <hlein@korelogic.com>
+Ian Stakenvicius <axs@gentoo.org>
+Jakob Drexel <jake42@rommel.stw.uni-erlangen.de>
+James Le Cuirot <chewi@aura-online.co.uk>
+Jan Psota <jasiu@belsznica.pl>
+Jason Zaman <jason@perfinion.com>
+Joe Harvell <jharvell@dogpad.net>
+Joe M <joe9mail@gmail.com>
+Johan Bergström <bugs@bergstroem.nu>
+Jory A. Pratt <anarchy@gentoo.org>
+Juan RP <xtraeme@gmail.com>
+Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
+Kfir Lavi <lavi.kfir@gmail.com>
+Kirill Elagin <kirelagin@gmail.com>
+Lars Wendler <polynomial-c@gentoo.org>
+Lorand Kelemen <lorand.kelemen@indgroup.eu>
+Marc Joliet <marcec@gmx.de>
+Marien Zwart <marienz@gentoo.org>
+Michal Gorny <gentoo@mgorny.alt.pl>
+Mihai Moldovan <ionic@ionic.de>
+Mike Frysinger <vapier@gentoo.org>
+Mike Gilbert <floppym@gentoo.org>
+Nao Nakashima <nao.nakashima@gmail.com>
+Natanael Copa <natanael.copa@gmail.com>
+Nathan Phillip Brink <ohnobinki@ohnopublishing.net>
+Ned Ludd <solar@gentoo.org>
+Olivier Huber <oli.huber@gmail.com>
+Patrick Lauer <patrick@gentoo.org>
+Petre Rodan <petre.rodan@simplex.ro>
+Piotr Karbowski <piotr.karbowski@gmail.com>
+Ralph Sennhauser <sera@gentoo.org>
+Richard Yao <ryao@cs.stonybrook.edu>
+Rick Farina (ZeroChaos) <sidhayn@gmail.com>
+Rick Farina (Zero_Chaos) <zerochaos@gentoo.org>
+Robin H. Johnson <robbat2@gentoo.org>
+Robin H. Johnson <robbat2@orbis-terrarum.net>
+Robin Johnson <robbat2@gentoo.org>
+Roy Marples <roy@marples.name>
+Salah Coronya <salah.coronya@gmail.com>
+Sebastian Thorarensen <indigo176@blinkenshell.org>
+Semen Maryasin <marsoft@ya.ru>
+Sergei Trofimovich <slyfox@gentoo.org>
+Seth Robertson <in-gentoo@baka.org>
+S. Gilles <sgilles@umd.edu>
+Stefan Knoblich <s.knoblich@axsentis.de>
+Stef Simoens <stef.simoens@scarlet.be>
+Steve L <slong@rathaus.eclipse.co.uk>
+Steven Chamberlain <steven@pyro.eu.org>
+Svante Signell <svante.signell@gmail.com>
+Sven Vermeulen <sven.vermeulen@siphos.be>
+Thomas D <whissi@whissi.de>
+Thomas Pfaff <tpfaff@gmx.net>
+Trevor Summers Smith <trevorsummerssmith@gmail.com>
+Walter <walter@pratyeka.org>
+William Hubbs <w.d.hubbs@gmail.com>
+William Hubbs <williamh@gentoo.org>
+Will Miles <wmiles@sgl.com>
+Yun Zheng Hu <hu@fox-it.com>
+Yuta SATOH <nigoro.gentoo@0x100.com>

BUSYBOX.md

@@ -1,6 +1,4 @@
-Using Busybox as your Default Shell
------------------------------------
-
+# Using Busybox as your Default Shell with OpenRC
 
 If you have/bin/sh linked to busybox, you need to be aware of several
 incompatibilities between busybox's applets and the standalone
@@ -24,8 +22,8 @@ or recognize the nofail option in fstab.
 
 CONFIG_SETFONT -- The setfont applet does not support the -u option from kbd.
 
-CONFIG_IP -- The ip applet  doesn't support the "scope" modifier for
-"ip route add" and "ip address add".
+CONFIG_BB_SYSCTL -- The sysctl applet does not support the --system command
+line switch.
 
 There is work to get most of these supported by busybox, so this file
 will be updated as things change.

FEATURE-REMOVAL-SCHEDULE

@@ -1,72 +0,0 @@
-The following is a list of files and features that are going to be removed in
-the source tree.  Every entry should contain what exactly is going away, why it
-is happening, and who is going to be doing the work.  When the feature is
-removed, it should also be removed from this file.
-
----------------------------
-
-What: Service pause action
-
-When: 1.0
-
-Why: ...
-
-Who:
-
----------------------------
-
-What: start-stop-daemon options --startas, --chuid , --oknodo
-
-When: 1.0
-
-Why: Obsolete or replaced by other options.
-	 --startas => use --name or --exec
-	 --chuid => use --user
-	 --oknodo => ignore return code instead
-
-Who:
-
----------------------------
-
-What: runscript and rc symbolic links
-
-When: 1.0
-
-Why: Deprecated in favor of openrc-run and openrc due to naming
-	 conflicts with other software.
-
-Who:
-
----------------------------
-
-What: support for the opts variable in service scripts
-
-When: 1.0
-
-Why: Depprecated in favor of extra_commands, extra_started_commands
-	 and extra_stopped_commands.
-
-Who:
-
----------------------------
-
-What: support for local_start and local_stop
-
-When: 1.0
-
-Why: Depprecated in favor of executable scripts in @SYSCONFDIR@/local.d
-
-Who:
-
----------------------------
-
-What: the mtab service script
-
-When: make warnings more visible in 1.0, remove in 2.0
-
-Why: /etc/mtab should be a symbolic link to /proc/self/mounts on modern
-	 Linux systems
-
-Who:
-
----------------------------

FEATURE-REMOVAL-SCHEDULE.md

@@ -0,0 +1,78 @@
+# Features Scheduled for Removal
+
+The following is a list of files and features that are going to be removed in
+the source tree.  Every entry should contain what exactly is going away, why it
+is happening, and who is going to be doing the work.  When the feature is
+removed, it should also be removed from this file.
+
+## Service pause action
+
+When: 1.0
+
+Why: The same affect can be obtained with the --nodeps option to stop.
+
+Who:
+
+## start-stop-daemon options --startas, --chuid , --oknodo
+
+When: 1.0
+
+Why: Obsolete or replaced by other options.
+
+* --startas => use --name or --exec
+* --chuid => use --user
+* --oknodo => ignore return code instead
+
+Who:
+
+## runscript and rc symbolic links
+
+When: 1.0
+
+Why: Deprecated in favor of openrc-run and openrc due to naming
+	 conflicts with other software.
+
+Who:
+
+## support for the opts variable in service scripts
+
+When: 1.0
+
+Why: Deprecated in favor of extra_commands, extra_started_commands
+	 and extra_stopped_commands.
+
+Who:
+
+## support for local_start and local_stop
+
+When: 1.0
+
+Why: Deprecated in favor of executable scripts in @SYSCONFDIR@/local.d
+
+Who:
+
+## the mtab service script
+
+When: force /etc/mtab to link to /proc/self/mounts in 1.0, remove
+	  service in 2.0
+
+Why: /etc/mtab should be a symbolic link to /proc/self/mounts on modern
+	 Linux systems
+
+Who:
+
+## C API Functions in rc.h
+
+If you have a c program that links to librc and uses functions from
+there, this section will list API functions which are deprecated and
+will be removed along with the reason they are being removed.
+
+### rc_getline()
+
+When: 1.0
+
+Why: The getline() function was standardized in POSIX.1-2008, so it
+	 should be available on POSIX systems.
+
+Who:
+

HISTORY.md

@@ -1,3 +1,5 @@
+# OpenRC History
+
 This history of OpenRC was written by Daniel Robbins, Roy Marples, William
 Hubbs and others.
 
@@ -52,4 +54,9 @@ Daniel Robbins continues to maintain an independent, forked
 version of OpenRC for Funtoo Linux, which includes a Funtoo-specific network
 configuration system. 
 
+On 17-Dec-2015 utc, Roy gave the OpenRC developers permission to replace his
+copyrights in all source files with a generic Copyright assertion for
+the OpenRC developers as long as we keep the original copyright in the
+binaries and  LICENSE file.
+
 [1] http://www.gentoo.org/news/en/gwn/20040426-newsletter.xml

LICENSE

@@ -0,0 +1,24 @@
+Copyright (c) 2007-2008, Roy Marples <roy@marples.name>
+Copyright (c) 2007-2015, the OpenRC authors
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice,
+   this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.

Makefile

@@ -1,10 +1,19 @@
-# OpenRC Makefile
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
-include Makefile.inc
+TOP:=		${dir ${realpath ${firstword ${MAKEFILE_LIST}}}}
+MK=			${TOP}/mk
 
-SUBDIR=		conf.d etc init.d local.d man scripts sh src sysctl.d
+include ${TOP}/Makefile.inc
+
+SUBDIR=		conf.d etc init.d local.d man scripts sh src support sysctl.d
 
 # Build pkgconfig or not
 MKPKGCONFIG?=	yes
@@ -17,12 +26,11 @@ SUBDIR+=	runlevels
 
 INSTALLAFTER=	_installafter
 
-MK= 		mk
 include ${MK}/sys.mk
 include ${MK}/os.mk
 include ${MK}/subdir.mk
 include ${MK}/dist.mk
-include ${MK}/git.mk
+include ${MK}/gitver.mk
 
 _installafter:
 ifeq (${MKPREFIX},yes)

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.13.9
+VERSION=	0.34
 PKG=		${NAME}-${VERSION}

NEWS

@@ -1,44 +0,0 @@
-OpenRC NEWS
-
-This file will contain a list of notable changes for each release.
-
-OpenRC-0.13.2
-=============
-
-A chroot variable has been added to the service script variables.
-This fixes the support for running a service in a chroot.
-This is documented in man 8 openrc-run.
-
-The netmount service now mounts nfs file systems.
-This change was made to correct a fix for an earlier bug.
-
-OpenRC-0.13
-===========
-
-/sbin/rc was renamed to /sbin/openrc and /sbin/runscript was renamed to
-/sbin/openrc-run due to naming conflicts with other software.
-
-Backward compatible symbolic links are currently in place so your
-system will keep working if you are using the old names; however, it is
-strongly advised that you migrate to the new names because the symbolic
-links will be removed in the future.
-Warnings have been added to assist with this migration; however, due to the
-level of noise they produce, they only appear in verbose mode in this release.
-
-The devfs script now handles the initial mounting and setup of the
-/dev directory. If /dev has already been mounted by the kernel or an
-initramfs, devfs will remount /dev with the correct mount options
-instead of mounting a second /dev over the existing mount point.
-
-It attempts to mount /dev from fstab first if an entry exists there. If
-it doesn't it attempts to mount devtmpfs if it is configured in the
-kernel. If not, it attempts to mount tmpfs.
-If none of these is available, an error message is displayed and static
-/dev is assumed.
-
-OpenRC-0.12
-===========
-
-The net.* scripts, originally from Gentoo Linux, have
-been removed. If you need these scripts, look for a package called
-netifrc, which is maintained by them.

NEWS.md

@@ -0,0 +1,215 @@
+# OpenRC NEWS
+
+This file will contain a list of notable changes for each release. Note
+the information in this file is in reverse order.
+
+## OpenRC 0.33
+
+This version removes the "service" binary which was just a copy of
+"rc-service" provided for compatibility.
+
+If you still need the "service" binary, as opposed to "rc-service", it is
+recommended that you use something like Debian's init-system-helpers.
+Otherwise, just use "rc-service" in place of "service".
+
+## OpenRC 0.31
+
+This version adds support for Control Groups version 2, which is
+considered stable as of Linux-4.13. Please see /etc/rc.conf for
+documentation on how to configure control groups.
+
+## OpenRC-0.28
+
+This version mounts efivars read only due to concerns about changes in
+this file system making systems unbootable.  If you need to change something
+in this path, you will need to re-mount it read-write, make the change
+and re-mount it read-only.
+
+Also, you can override this behavior by adding a line for efivars to
+fstab if you want efivars mounted read-write.
+
+For more information on this issue, see the following url:
+
+https://github.com/openrc/openrc/issues/134
+
+## OpenRC-0.25
+
+This version contains an OpenRC-specific implementation of init for
+Linux which can be used in place of sysvinit or any other init process.
+For information on its usage, see the man pages for openrc-init (8) and
+openrc-shutdown (8).
+
+## OpenRC-0.24.1
+
+This version starts cleaning up the dependencies so that rc_parallel
+will work correctly.
+
+The first step in this process is to remove the 'before *' from the
+depend functions in the clock services. This means some  services not
+controlled by OpenRC may now start before instead of after the clock
+service. If it is important for these services to start after the clock
+service, they need to have 'after clock' added to their depend
+functions.
+
+## OpenRC-0.24
+
+Since the deptree2dot tool and the perl requirement are completely
+optional, the deptree2dot tool has been moved to the support directory.
+As a result, the MKTOOLS=yes/no switch has been removed from the makefiles.
+
+This version adds the agetty service which can be used to spawn
+agetty on a specific terminal. This is currently documented in the
+agetty-guide.md file at the top level of this distribution.
+
+## OpenRC-0.23
+
+The tmpfiles.d processing code, which was part of previous versions of
+OpenRC, has been separated into its own package [1]. If you need to
+process systemd style tmpfiles.d files, please install this package.
+
+[1] https://github.com/openrc/opentmpfiles
+
+## OpenRC-0.22
+
+In previous versions of OpenRC, configuration information was processed
+so that service-specific configuration stored in /etc/conf.d/* was
+overridden by global configuration stored in /etc/rc.conf. This release
+reverses that. Global configuration is now overridden by
+service-specific configuration.
+
+The swapfiles service, which was basically a copy of the swap service,
+has been removed. If you are only using swap partitions, this change
+will not affect you. If you are using swap files, please adjust the
+dependencies of the swap service as shown in /etc/conf.d/swap.
+
+## OpenRC-0.21
+
+This version adds a daemon supervisor which can start daemons and
+restart them if they crash. See supervise-daemon-guide.md in the
+distribution for details on its use.
+
+It is now possible to mark certain mount points as critical. If these
+mount points are unable to be mounted, localmount or netmount will fail.
+This is handled in /etc/conf.d/localmount and /etc/conf.d/netmount. See
+these files for the setup.
+
+The deprecation messages in 0.13.x for runscript and rc are now
+made visible in preparation for the removal of these binaries in 1.0.
+
+The steps you should take to get rid of these warnings is to run openrc
+in initialization steps instead of rc and change the shebang lines in
+service scripts to refer to "openrc-run" instead of "runscript".
+
+In 0.21.4, a modules-load service was added. This works like the
+equivalent service in systemd. It looks for files named *.conf first in
+/usr/lib/modules-load.d, then /run/modules-load.d, then
+/etc/modules-load.d. These files contain a list of modules, one per
+line, which should be loaded into the kernel. If a file name appears in
+/run/modules-load.d, it overrides a file of the same name in
+/usr/lib/modules-load.d. A file appearing in /etc/modules-load.d
+overrides a file of the same name in both previous directories.
+
+## OpenRC-0.19
+
+This version adds a net-online service. By default, this
+service will check all known network interfaces for a configured
+interface or a carrier. It will register as started only when all
+interfaces are configured and there is at least a carrier on one
+interface. The behaviour of this service can be modified in
+/etc/conf.d/net-online.
+
+Currently, this only works on Linux, but if anyone wants to port to
+*bsd, that would be welcomed.
+
+## OpenRC-0.18.3
+
+Modern Linux systems expect /etc/mtab to be a symbolic link to
+/proc/self/mounts. Reasons for this change include support for mount
+namespaces, which will not work if /etc/mtab is a file.
+By default, the mtab service enforces this on each reboot.
+
+If you find that this breaks your system in some way, please do the
+following:
+
+- Set mtab_is_file=yes in /etc/conf.d/mtab.
+
+- Restart mtab. This will recreate the /etc/mtab file.
+
+- Check for an issue on https://github.com/openrc/openrc/issues
+  explaining why you need /etc/mtab to be a file. If there isn't one,
+  please open one and explain in detail why you need this to be a file.
+  If there is one, please add your comments to it. Please give concrete
+  examples of why  it is important that /etc/mtab be a file instead of a
+  symbolic link. Those comments will be taken into consideration for how
+  long to keep supporting mtab as a file or when the support can be
+  removed.
+
+## OpenRC-0.18
+
+The behaviour of localmount and netmount in this version is changing. In
+the past, these services always started successfully. In this version,
+they will be able to fail if file systems they mount fail to mount. If
+you have file systems listed in fstab which should not be mounted at
+boot time, make sure to add noauto to the mount options. If you have
+file systems that you want to attempt to mount at boot time but failure
+should be allowed, add nofail to the mount options for these file
+systems in fstab.
+
+## OpenRC-0.14
+
+The binfmt service, which registers misc binary formats with the Linux
+kernel, has been separated from the procfs service. This service will be
+automatically added to the boot runlevel for new Linux installs. When
+you upgrade, you will need to use rc-update to add it to your boot
+runlevel.
+
+The procfs service no longer automounts the deprecated usbfs and
+usbdevfs file systems. Nothing should be using usbdevfs any longer, and
+if you still need usbfs it can be added to fstab.
+
+Related to the above change, the procfs service no longer attempts to
+modprobe the usbcore module. If your device manager does not load it,
+you will need to configure the modules service to do so.
+
+The override order of binfmt.d and tmpfiles.d directories has been
+changed to match systemd. Files in /run/binfmt.d and /run/tmpfiles.d
+override their /usr/lib counterparts, and files in the /etc counterparts
+override both /usr/lib and /run.
+
+## OpenRC-0.13.2
+
+A chroot variable has been added to the service script variables.
+This fixes the support for running a service in a chroot.
+This is documented in man 8 openrc-run.
+
+The netmount service now mounts nfs file systems.
+This change was made to correct a fix for an earlier bug.
+
+## OpenRC-0.13
+
+/sbin/rc was renamed to /sbin/openrc and /sbin/runscript was renamed to
+/sbin/openrc-run due to naming conflicts with other software.
+
+Backward compatible symbolic links are currently in place so your
+system will keep working if you are using the old names; however, it is
+strongly advised that you migrate to the new names because the symbolic
+links will be removed in the future.
+Warnings have been added to assist with this migration; however, due to the
+level of noise they produce, they only appear in verbose mode in this release.
+
+The devfs script now handles the initial mounting and setup of the
+/dev directory. If /dev has already been mounted by the kernel or an
+initramfs, devfs will remount /dev with the correct mount options
+instead of mounting a second /dev over the existing mount point.
+
+It attempts to mount /dev from fstab first if an entry exists there. If
+it doesn't it attempts to mount devtmpfs if it is configured in the
+kernel. If not, it attempts to mount tmpfs.
+If none of these is available, an error message is displayed and static
+/dev is assumed.
+
+## OpenRC-0.12
+
+The net.* scripts, originally from Gentoo Linux, have
+been removed. If you need these scripts, look for a package called
+netifrc, which is maintained by them.

README

@@ -1,66 +0,0 @@
-OpenRC README
-
-
-Installation
-------------
-make install
-Yup, that simple. Works with GNU make.
-
-You may wish to tweak the installation with the below arguments
-PROGLDFLAGS=-static
-LIBNAME=lib64
-DESTDIR=/tmp/openrc-image
-MKNET=no
-MKPAM=pam
-MKPREFIX=yes
-MKPKGCONFIG=no
-MKSELINUX=yes
-MKSTATICLIBS=no
-MKTERMCAP=ncurses
-MKTERMCAP=termcap
-MKTOOLS=yes
-PKG_PREFIX=/usr/pkg
-LOCAL_PREFIX=/usr/local
-PREFIX=/usr/local
-
-We don't support building a static OpenRC with PAM.
-You may need to use PROGLDFLAGS=-Wl,-Bstatic on glibc instead of just -static.
-If you debug memory under valgrind, add -DDEBUG_MEMORY to your CPPFLAGS
-so that all malloc memory should be freed at exit.
-If you are building OpenRC for a Gentoo Prefix installation, add
-MKPREFIX=yes.
-
-You can also brand OpenRC if you so wish like so
-BRANDING=\"Gentoo/$(uname -s)\"
-
-PKG_PREFIX should be set to where packages install to by default.
-LOCAL_PREFIX should be set when to where user maintained packages are.
-Only set LOCAL_PREFIX if different from PKG_PREFIX.
-PREFIX should be set when OpenRC is not installed to /.
-
-If any of the following files exist then we do not overwrite them
-/etc/devd.conf
-/etc/rc
-/etc/rc.shutdown
-/etc/conf.d/*
-
-rc and rc.shutdown are the hooks from the BSD init into OpenRC.
-devd.conf is modified from FreeBSD to call /etc/rc.devd which is a generic
-hook into OpenRC.
-inittab is the same, but for SysVInit as used by most Linux distributions.
-This can be found in the support folder.
-Obviously, if you're installing this onto a system that does not use OpenRC
-by default then you may wish to backup the above listed files, remove them
-and then install so that the OS hooks into OpenRC.
-
-init.d.misc is not installed by default as the scripts will need
-tweaking on a per distro basis. They are also non essential to the operation
-of the system.
-
-Reporting Bugs
---------------
-Since Gentoo Linux is hosting OpenRC development, Bugs should go to
-the Gentoo Bugzilla:
-	http://bugs.gentoo.org/
-They should be filed under the "Gentoo Hosted Projects" product and
-the "openrc" component.

README.md

@@ -0,0 +1,92 @@
+# OpenRC README
+
+OpenRC is a dependency-based init system that works with the
+system-provided init program, normally `/sbin/init`. Currently, it does
+not have an init program of its own.
+
+## Installation
+
+OpenRC requires GNU make.
+
+Once you have GNU Make installed, the default OpenRC installation can be
+executed using this command:
+
+make install
+
+## Configuration
+
+You may wish to configure the installation by passing one or more of the
+below arguments to the make command
+
+```
+PROGLDFLAGS=-static
+LIBNAME=lib64
+DESTDIR=/tmp/openrc-image
+MKNET=no
+MKPAM=pam
+MKPREFIX=yes
+MKPKGCONFIG=no
+MKSELINUX=yes
+MKSTATICLIBS=no
+MKSYSVINIT=yes
+MKTERMCAP=ncurses
+MKTERMCAP=termcap
+PKG_PREFIX=/usr/pkg
+LOCAL_PREFIX=/usr/local
+PREFIX=/usr/local
+BRANDING=\"Gentoo/$(uname -s)\"
+```
+
+## Notes
+
+We don't support building a static OpenRC with PAM.
+
+You may need to use `PROGLDFLAGS=-Wl,-Bstatic` on glibc instead of just `-static`.
+
+If you are building OpenRC for a Gentoo Prefix installation, add `MKPREFIX=yes`.
+
+`PKG_PREFIX` should be set to where packages install to by default.
+
+`LOCAL_PREFIX` should be set when to where user maintained packages are.
+Only set `LOCAL_PREFIX` if different from `PKG_PREFIX`.
+
+`PREFIX` should be set when OpenRC is not installed to /.
+
+If any of the following files exist then we do not overwrite them
+
+```
+/etc/devd.conf
+/etc/rc
+/etc/rc.shutdown
+/etc/conf.d/*
+```
+
+`rc` and `rc.shutdown` are the hooks from the BSD init into OpenRC.
+
+`devd.conf` is modified from FreeBSD to call `/etc/rc.devd` which is a
+generic hook into OpenRC.
+
+`inittab` is the same, but for SysVInit as used by most Linux distributions.
+This can be found in the support folder.
+
+Obviously, if you're installing this onto a system that does not use
+OpenRC by default then you may wish to backup the above listed files,
+remove them and then install so that the OS hooks into OpenRC.
+
+## Reporting Bugs
+
+If you are using Gentoo Linux, bugs can be filed on their bugzilla under
+the `gentoo hosted projects` product and the `openrc` component [1].
+Otherwise, you can report issues on our github [2].
+
+Better yet, if you can contribute code, please feel free to submit pull
+requests [3].
+
+## IRC Channel
+
+We have an official irc channel, #openrc on freenode, feel free to join
+us there.
+
+[1]	https://bugs.gentoo.org/
+[2]	https://github.com/openrc/openrc/issues
+[3]	https://github.com/openrc/openrc/pulls

STYLE-GUIDE.md

@@ -1,23 +1,23 @@
+# OpenRC Style Guide
+
 This is the openrc style manual.  It governs the coding style of all code
 in this repository.  Follow it.  Contact openrc@gentoo.org for any questions
 or fixes you might notice.
 
-##########
-# C CODE #
-##########
+## C CODE
 
-The BSD Kernel Normal Form (KNF) style is used:
-	http://en.wikipedia.org/wiki/Indent_style#BSD_KNF_style
-Basically, it's like K&R/LKML, but wrapped lines that are indented use 4 spaces.
+The BSD Kernel Normal Form (KNF) style is used [1]. Basically, it is like
+K&R/LKML, but wrapped lines that are indented use 4 spaces. Here are the
+highlights.
 
-Highlights:
-	- no trailing whitespace
-	- indented code use tabs (not line wrapped)
-	- cuddle the braces (except for functions)
-	- space after native statements and before paren (for/if/while/...)
-	- no space between function and paren
-	- pointer asterisk cuddles the variable, not the type
+- no trailing whitespace
+- indented code use tabs (not line wrapped)
+- cuddle the braces (except for functions)
+- space after native statements and before paren (for/if/while/...)
+- no space between function and paren
+- pointer asterisk cuddles the variable, not the type
 
+```
 void foo(int c)
 {
 	int ret = 0;
@@ -32,16 +32,15 @@ void foo(int c)
 
 	return ret;
 }
+```
 
-##################
-# COMMIT MESSAGES #
-##################
+## COMMIT MESSAGES
 
 The following is an example of a correctly formatted git commit message
 for this repository. Most of this information came from this blog post
-[1], so I would like to thank the author.
+[2], so I would like to thank the author.
 
-### cut here ###
+```
 Capitalized, short (50 chars or less) summary
 
 More detailed explanatory text, if necessary.  Wrap it to about 72
@@ -67,7 +66,7 @@ Further paragraphs come after blank lines.
 Reported-by: User Name <email>
 X-[Distro]-Bug: BugID
 X-[Distro]-Bug-URL: URL for the bug (on the distribution's web site typically)
-### cut here ###
+```
 
 If you did not write the code and the patch does not include authorship
 information in a format git can use, please use the --author option of the
@@ -81,5 +80,5 @@ different from the author and committer.
   *BSD. Also, [Distro] should be replaced with the name of the
   distribution, e.g. X-Gentoo-Bug.
 
-[1] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html
-
+[1]	http://en.wikipedia.org/wiki/Indent_style#BSD_KNF_style
+[2] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html

agetty-guide.md

@@ -0,0 +1,18 @@
+# Setting up the agetty service in OpenRC
+
+The agetty service is an OpenRC specific way to monitor and respawn a
+getty, using agetty, on Linux. To use this method, make sure you aren't
+spawning a getty manager for this port some other way (such as through
+sysvinit/inittab), then run the following commands as root.
+
+Note that [port] refers to the port you are spawning the getty on, for
+example, tty1 or ttyS0. The full path to it, for example, /dev/tty1
+should not be used.
+
+```
+# cd /etc/init.d
+# ln -s agetty agetty.[port]
+# cd /etc/conf.d
+# cp agetty agetty.[port]
+#rc-update add agetty.[port] [runlevel]
+```

conf.d/.gitignore

@@ -1,2 +0,0 @@
-network
-staticroute

conf.d/Makefile

@@ -1,28 +1,20 @@
 include ../mk/net.mk
 
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount netmount urandom tmpfiles \
-		${CONF-${OS}}
+CONF=	bootmisc fsck hostname localmount netmount swap urandom ${CONF-${OS}}
 
 ifeq (${MKNET},yes)
 CONF+= network staticroute
-TARGETS+=	network staticroute
-CLEANFILES+=	network staticroute
 endif
 
 MK=	../mk
 include ${MK}/os.mk
 
-CONF-FreeBSD=	ipfw moused powerd rarpd savecore syscons
+CONF-FreeBSD=	ipfw modules moused powerd rarpd savecore syscons
 
-CONF-Linux=	consolefont devfs dmesg hwclock keymaps killprocs modules
+CONF-Linux=	agetty consolefont devfs dmesg hwclock keymaps killprocs modules \
+	mtab net-online
 
 CONF-NetBSD=	moused rarpd savecore
 
 include ${MK}/scripts.mk
-
-network: network.in network${SFX}
-	cat $^ > $@
-
-staticroute: staticroute${SFX}
-	cp $@${SFX} $@

conf.d/agetty

@@ -0,0 +1,11 @@
+# make agetty quiet
+#quiet="yes"
+
+# Set the baud rate of the terminal line
+#baud=""
+
+# set the terminal type
+#term_type="linux"
+
+# extra options to pass to agetty for this port
+#agetty_options=""

conf.d/bootmisc

@@ -8,3 +8,8 @@ wipe_tmp="YES"
 # Write the initial dmesg log into /var/log/dmesg after boot
 # This may be useful if you need the kernel boot log afterwards
 log_dmesg="YES"
+
+# Save the previous dmesg log to dmesg.old
+# This may be useful if you need to compare the current boot to the
+# previous one.
+#previous_dmesg=no

conf.d/fsck

@@ -32,3 +32,9 @@ fsck_on_battery="YES"
 # This is useful when periodic filesystem checks are causing undesirable
 # delays at startup, but such delays at shutdown are acceptable.
 fsck_shutdown="NO"
+
+# fsck_abort_on_errors can be set to no to cause fsck to not abort on
+# errors.
+# This is useful when periodic filesystem checks are causing undesirable
+# aborts.
+fsck_abort_on_errors="YES"

conf.d/killprocs

@@ -1,3 +1,6 @@
-# If you wish to pass any options to killall5 during shutdown,
+# If you wish to pass any options to kill_all during shutdown,
 # you should do so here.
+#
+# The setting is called killall5_opts because the options here are meant
+# to be identical to those you could pass to killall5.
 killall5_opts=""

conf.d/localmount

@@ -1,3 +1,10 @@
 # Stop the unmounting of certain points.
 # This could be useful for some NFS related work.
 #no_umounts="/dir1:/var/dir2"
+#
+# Mark certain mount points as critical.
+# This contains a space separated list of mount points which should be
+# considered critical. If one of these mount points cannot be mounted,
+# localmount will fail.
+# By default, this is empty.
+#critical_mounts="/home /var"

conf.d/modules

@@ -1,18 +1,22 @@
-# You can define a list modules for a specific kernel version,
-# a released kernel version, a main kernel version or just a list.
+# Linux users can define a list of modules for a specific kernel version,
+# a released kernel version, a main kernel version or all kernel versions.
 # The most specific versioned variable will take precedence.
+# FreeBSD users can only use the modules="foo bar" setting.
 #modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
 #modules_2_6_23="tun ieee1394"
 #modules_2_6="tun"
 #modules_2="ipv6"
 #modules="ohci1394"
 
-# You can give modules a different name when they load - the new name
+# Linux users can give modules a different name when they load - the new name
 # will also be used to pick arguments below.
+# This is not supported on FreeBSD.
 #modules="dummy:dummy1"
 
-# Give the modules some arguments if needed, per version if necessary.
+# Linux users can give the modules some arguments if needed, per version
+# if necessary.
 # Again, the most specific versioned variable will take precedence.
+# This is not supported on FreeBSD.
 #module_ieee1394_args="debug"
 #module_ieee1394_args_2_6_23_gentoo_r5="debug2"
 #module_ieee1394_args_2_6_23="debug3"

conf.d/mtab

@@ -0,0 +1,5 @@
+# This setting controls whether /etc/mtab is a file or symbolic link.
+# Most of the time, you shouldn't touch this. However, if the default
+# breaks your system in some way, please see the NEWS.md file that comes
+# with OpenRC for the actions to take.
+# mtab_is_file=no

conf.d/net-online

@@ -0,0 +1,18 @@
+# The interfaces setting controls which interfaces the net-online
+# service considers in deciding whether the network is active. The
+# default is all interfaces that support ethernet.
+#interfaces=""
+
+# This setting controls whether a ping test is included in the test for
+# network connectivity after all interfaces are active.
+#include_ping_test=no
+
+# This setting is the host to attempt to ping if the above is yes.
+# The default is google.com.
+#ping_test_host=some.host.name
+
+# The timeout setting controls how long the net-online service waits
+# for the network to be configured.
+# The default is 120 seconds.
+# if this is set to 0, the wait is infinite.
+#timeout=120

conf.d/netmount

@@ -25,11 +25,11 @@
 #rc_need="net.eth1 net.eth2"
 #
 # If you are using a dynamic network management tool like
-# networkmanager, dhcpcd in standalone mode, wicd, badvpn-ncd, etc, to
+# NetworkManager, dhcpcd in standalone mode, wicd, badvpn-ncd, etc, to
 # manage the network interfaces with the routes to your netmounts, you
 # should list that tool.
 #
-#rc_need="networkmanager"
+#rc_need="NetworkManager"
 #rc_need="dhcpcd"
 #rc_need="wicd"
 #
@@ -38,3 +38,10 @@
 # other words, please change it to be more suited to your system.
 #
 rc_need="net"
+#
+# Mark certain mount points as critical.
+# This contains aspace separated list of mount points which should be
+# considered critical. If one of these mount points cannot be mounted,
+# netmount will fail.
+# By default, this is empty.
+#critical_mounts="/home /var"

conf.d/network

@@ -0,0 +1,80 @@
+# Assign static IP addresses and run custom scripts per interface.
+# Seperate commands with ;
+# Prefix with ! to run a shell script.
+# Use \$int to represent the interface
+#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
+
+# You also have ifup_eth0 and ifdown_eth0 to run other commands when
+# eth0 is started and stopped.
+# You should note that we don't stop the network at system shutdown by default.
+# If you really need this, then set keep_network=NO
+
+# Lastly, the interfaces variable pulls in virtual interfaces that cannot
+# be automatically detected.
+#interfaces="br0 bond0 vlan0"
+
+# You can also use files instead of variables here if you like:
+# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0
+# /etc/ip.eth0 is equivalent to ifconfig_eth0
+# /etc/ifup.eth0 is equivalent to ifup_eth0
+# /etc/ifdown.eth0 is equivalent to ifdown_eth0
+# Any files found will automatically be put into the interfaces variable.
+# You don't need to escape variables in files, so use $int instead of \$int.
+
+# If you require DHCP, you should install dhcpcd and add it to the boot or
+# default runlevel.
+
+# NIS users can set the domain name here
+#domainname="foobar"
+
+# You can add a default route.
+# The way this is done is slightly different depending on the operating system.
+#
+# *BSD:
+#defaultroute="192.168.0.1"
+#defaultroute6="2001:a:b:c"
+#Hurd/Linux (ifconfig):
+#defaultroute="gw 192.168.0.1"
+#defaultroute6="gw 2001:a:b:c"
+
+# The remainder of this file applies to Linux only and shows how
+# iproute2 is supported along with other examples.
+
+# ifconfig under Linux is not that powerful and doesn't easily handle
+# multiple addresses
+# On the other hand, iproute2 is quite powerful and is also supported
+#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
+
+# You can also use iproute2 to add the default route.
+#defaultiproute="via 192.168.0.1"
+#defaultiproute6="via 2001:a:b:c"
+
+# ip doesn't handle MTU like ifconfig, but we can do it like so
+#ifup_eth0="ip link set \$int mtu 1500"
+
+# Create a bonded interface
+#interfaces="bond0"
+#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
+#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
+#ifdown_bond0="rmmod bonding"
+
+# Create tap interface and a bridge interface.
+# We add the tap to the bridge.
+# An external program, like dhcpcd, will configure the IP on the bridge
+#interfaces="tun0 br0"
+#ifup_tun0="tunctl -t \$int"
+#ifdown_tun0="tunctl -d \$int"
+#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
+#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
+
+# Create VLAN
+#interfaces="eth0_2 eth0_3 eth0_4"
+#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
+#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
+#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
+#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
+#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
+
+# Normally you would use wpa_supplicant to configure wireless, but you can
+# use iwconfig also
+#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

conf.d/network.BSD.in

@@ -1,4 +0,0 @@
-
-# You can assign a default route
-#defaultroute="192.168.0.1"
-#defaultroute6="2001:a:b:c"

conf.d/network.GNU-kFreeBSD.in

@@ -1,4 +0,0 @@
-
-# You can assign a default route
-#defaultroute="192.168.0.1"
-#defaultroute6="2001:a:b:c"

conf.d/network.GNU.in

@@ -1,4 +0,0 @@
-
-# You can assign a default route
-#defaultroute="gw 192.168.0.1"
-#defaultroute6="gw 2001:a:b:c"

conf.d/network.Linux.in

@@ -1,43 +0,0 @@
-
-# You can assign a default route
-#defaultroute="gw 192.168.0.1"
-#defaultroute6="gw 2001:a:b:c"
-
-# ifconfig under Linux is not that powerful and doesn't easily handle
-# multiple addresses
-# On the other hand, ip (iproute2) is quite powerful and is also supported
-#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
-
-# You can also use ip to add the default route.
-#defaultiproute="via 192.168.0.1"
-#defaultiproute6="via 2001:a:b:c"
-
-# ip doesn't handle MTU like ifconfig, but we can do it like so
-#ifup_eth0="ip link set \$int mtu 1500"
-
-# Create a bonded interface
-#interfaces="bond0"
-#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
-#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
-#ifdown_bond0="rmmod bonding"
-
-# Create tap interface and a bridge interface.
-# We add the tap to the bridge.
-# An external program, like dhcpcd, will configure the IP on the bridge
-#interfaces="tun0 br0"
-#ifup_tun0="tunctl -t \$int"
-#ifdown_tun0="tunctl -d \$int"
-#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
-#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
-
-# Create VLAN
-#interfaces="eth0_2 eth0_3 eth0_4"
-#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
-#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
-#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
-#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
-#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
-
-# Normally you would use wpa_supplicant to configure wireless, but you can
-# use iwconfig also
-#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

conf.d/network.in

@@ -1,28 +0,0 @@
-# Assign static IP addresses and run custom scripts per interface.
-# Seperate commands with ;
-# Prefix with ! to run a shell script.
-# Use \$int to represent the interface
-#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
-
-# You also have ifup_eth0 and ifdown_eth0 to run other commands when
-# eth0 is started and stopped.
-# You should note that we don't stop the network at system shutdown by default.
-# If you really need this, then set keep_network=NO
-
-# Lastly, the interfaces variable pulls in virtual interfaces that cannot
-# be automatically detected.
-#interfaces="br0 bond0 vlan0"
-
-# You can also use files instead of variables here if you like:
-# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0
-# /etc/ip.eth0 is equivalent to ifconfig_eth0
-# /etc/ifup.eth0 is equivalent to ifup_eth0
-# /etc/ifdown.eth0 is equivalent to ifdown_eth0
-# Any files found will automatically be put into the interfaces variable.
-# You don't need to escape variables in files, so use $int instead of \$int.
-
-# If you require DHCP, you should install dhcpcd and it to the boot or
-# default runlevel.
-
-# NIS users can set the domain name here
-#domainname="foobar"

conf.d/staticroute

@@ -0,0 +1,26 @@
+# Static routes are defined differently depending on your operating
+# system, so please be sure to use the correct syntax.
+# Do not use this file to define the default route.
+# In all settings, multiple routes should be separated using ; or new lines.
+
+# Define static routes on Linux using route. See route(8) for syntax.
+#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
+#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
+
+# Define static routes on Linux using iproute2. See ip(8) for syntax.
+#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"
+
+# Define static routes on GNU/Hurd. See route(8) for syntax.
+# /etc/route.conf(5) takes precedence over this configuration.
+# FIXME: "net ..." not supported
+#staticroute="net 192.168.0.0 -netmask 255.255.255.0 --address 10.73.1.1
+#net 192.168.1.0 -netmask 255.255.255.0 --address 10.73.1.1"
+
+# Define static routes on GNU/KFreeBSD. See route(8) for syntax.
+#staticroute="net 192.168.0.0 10.73.1.1 netmask 255.255.255.0
+#net 192.168.1.0 10.73.1.1 netmask 255.255.255.0"
+
+# Define static routes on other BSD systems. See route(8) for syntax.
+# /etc/route.conf(5) takes precedence over this configuration.
+#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
+#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.BSD.in

@@ -1,6 +0,0 @@
-# Separate multiple routes using ; or new lines.
-# /etc/route.conf(5) takes precedence over this configuration.
-
-# Example static routes. See route(8) for syntax.
-#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
-#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.GNU-kFreeBSD.in

@@ -1,5 +0,0 @@
-# Separate multiple routes using ; or new lines.
-
-# Example static routes. See route(8) for syntax.
-#staticroute="net 192.168.0.0 10.73.1.1 netmask 255.255.255.0
-#net 192.168.1.0 10.73.1.1 netmask 255.255.255.0"

conf.d/staticroute.GNU.in

@@ -1,7 +0,0 @@
-# Separate multiple routes using ; or new lines.
-# /etc/route.conf(5) takes precedence over this configuration.
-
-# Example static routes. See route(8) for syntax.
-# FIXME: "net ..." not supported
-#staticroute="net 192.168.0.0 -netmask 255.255.255.0 --address 10.73.1.1
-#net 192.168.1.0 -netmask 255.255.255.0 --address 10.73.1.1"

conf.d/staticroute.Linux.in

@@ -1,8 +0,0 @@
-# Separate multiple routes using ; or new lines.
-
-# Example static routes. See route(8) for syntax.
-#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
-#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
-
-# Example static routes using iproute2. See ip(8) for syntax.
-#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"

conf.d/swap

@@ -0,0 +1,13 @@
+# If you are only using local swap partitions, you should not change
+# this file. Otherwise, you need to uncomment the below rc_before line
+# followed by the appropriate rc_need line.
+#rc_before="!localmount"
+#
+# If you are using swap files stored on local file systems, uncomment
+# this line.
+#rc_need="localmount"
+#
+# If you are using swap files stored on network file systems or swap
+# partitions stored on network block devices such as iSCSI, uncomment
+# this line.
+#rc_need="netmount"

conf.d/tmpfiles

@@ -1,3 +0,0 @@
-# Extra options for tmpfiles.sh
-#tmpfiles_opts="--verbose"
-tmpfiles_opts=""

etc/.gitignore

@@ -1,3 +1,2 @@
-rc.conf
 rc
 rc.shutdown

etc/Makefile

@@ -1,10 +1,8 @@
 DIR=	${SYSCONFDIR}
-SRCS=	rc.conf.in rc.in rc.shutdown.in
+SRCS=	rc.in rc.shutdown.in
 BIN=	${BIN-${OS}}
 CONF=	rc.conf ${BIN-${OS}}
 
-CLEANFILES+=	rc.conf
-
 MK=	../mk
 include ${MK}/os.mk
 
@@ -23,6 +21,3 @@ CONF-NetBSD=
 SED_EXTRA=	${SED_EXTRA-${OS}}
 
 include ${MK}/scripts.mk
-
-rc.conf: rc.conf.in rc.conf.${OS}
-	${SED} ${SED_REPLACE} ${SED_EXTRA} $^ > $@

etc/rc.conf

@@ -0,0 +1,309 @@
+# Global OpenRC configuration settings
+
+# Set to "YES" if you want the rc system to try and start services
+# in parallel for a slight speed improvement. When running in parallel we
+# prefix the service output with its name as the output will get
+# jumbled up.
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
+#rc_parallel="NO"
+
+# Set rc_interactive to "YES" and you'll be able to press the I key during
+# boot so you can choose to start specific services. Set to "NO" to disable
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
+#rc_interactive="YES"
+
+# If we need to drop to a shell, you can specify it here.
+# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
+# otherwise /bin/sh
+# Linux users could specify /sbin/sulogin
+#rc_shell=/bin/sh
+
+# Do we allow any started service in the runlevel to satisfy the dependency
+# or do we want all of them regardless of state? For example, if net.eth0
+# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
+# both will be started, but services that depend on 'net' will work if either
+# one comes up. With rc_depend_strict="YES" we would require them both to
+# come up.
+#rc_depend_strict="YES"
+
+# rc_hotplug controls which services we allow to be hotplugged.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# Hotplugged services appear in the "hotplugged" runlevel.
+# If rc_hotplug is set to any value, we compare the name of this service
+# to every pattern in the value, from left to right, and we allow the
+# service to be hotplugged if it matches a pattern, or if it matches no
+# patterns. Patterns can include shell wildcards.
+# To disable services from being hotplugged, prefix patterns with "!".
+#If rc_hotplug is not set or is empty, all hotplugging is disabled.
+# Example - rc_hotplug="net.wlan !net.*"
+# This allows net.wlan and any service not matching net.* to be hotplugged.
+# Example - rc_hotplug="!net.*"
+# This allows services that do not match "net.*" to be hotplugged.
+
+# rc_logger launches a logging daemon to log the entire rc process to
+# /var/log/rc.log
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+#rc_logger="NO"
+
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+#rc_log_path="/var/log/rc.log"
+
+# If you want verbose output for OpenRC, set this to yes. If you want
+# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
+#rc_verbose=no
+
+# By default we filter the environment for our running scripts. To allow other
+# variables through, add them here. Use a * to allow all variables through.
+#rc_env_allow="VAR1 VAR2"
+
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+#rc_start_wait=100
+
+# rc_nostop is a list of services which will not stop when changing runlevels.
+# This still allows the service itself to be stopped when called directly.
+#rc_nostop=""
+
+# rc will attempt to start crashed services by default.
+# However, it will not stop them by default as that could bring down other
+# critical services.
+#rc_crashed_stop=NO
+#rc_crashed_start=YES
+
+# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
+# output.
+#rc_nocolor=NO
+
+##############################################################################
+# MISC CONFIGURATION VARIABLES
+# There variables are shared between many init scripts
+
+# Set unicode to YES to turn on unicode support for keyboards and screens.
+#unicode="NO"
+
+# This is how long fuser should wait for a remote server to respond. The
+# default is 60 seconds, but  it can be adjusted here.
+#rc_fuser_timeout=60
+
+# Below is the default list of network fstypes.
+#
+# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
+
+##############################################################################
+# SERVICE CONFIGURATION VARIABLES
+# These variables are documented here, but should be configured in
+# /etc/conf.d/foo for service foo and NOT enabled here unless you
+# really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
+
+# Some daemons are started and stopped via start-stop-daemon.
+# We can set some things on a per service basis, like the nicelevel.
+#SSD_NICELEVEL="-19"
+# Or the ionice level. The format is class[:data] , just like the
+# --ionice start-stop-daemon parameter.
+#SSD_IONICELEVEL="2:2"
+
+# Pass ulimit parameters
+# If you are using bash in POSIX mode for your shell, note that the
+# ulimit command uses a block size of 512 bytes for the -c and -f
+# options
+#rc_ulimit="-u 30"
+
+# It's possible to define extra dependencies for services like so
+#rc_config="/etc/foo"
+#rc_need="openvpn"
+#rc_use="net.eth0"
+#rc_after="clock"
+#rc_before="local"
+#rc_provide="!net"
+
+# You can also enable the above commands here for each service. Below is an
+# example for service foo.
+#rc_foo_config="/etc/foo"
+#rc_foo_need="openvpn"
+#rc_foo_after="clock"
+
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
+# You can also remove dependencies.
+# This is mainly used for saying which services do NOT provide net.
+#rc_net_tap0_provide="!net"
+
+# This is the subsystem type.
+# It is used to match against keywords set by the keyword call in the
+# depend function of service scripts.
+#
+# It should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+# If it is commented out, automatic detection will be used.
+#
+# The list below shows all possible settings as well as the host
+# operating systems where they can be used and autodetected.
+#
+# ""               - nothing special
+# "docker"         - Docker container manager (Linux)
+# "jail"           - Jail (DragonflyBSD or FreeBSD)
+# "lxc"            - Linux Containers
+# "openvz"         - Linux OpenVZ
+# "prefix"         - Prefix
+# "rkt"            - CoreOS container management system (Linux)
+# "subhurd"        - Hurd subhurds (to be checked)
+# "systemd-nspawn" - Container created by systemd-nspawn (Linux)
+# "uml"            - Usermode Linux
+# "vserver"        - Linux vserver
+# "xen0"           - Xen0 Domain (Linux and NetBSD)
+# "xenU"           - XenU Domain (Linux and NetBSD)
+#rc_sys=""
+
+# if  you use openrc-init, which is currently only available on Linux,
+# this is the default runlevel to activate after "sysinit" and "boot"
+# when booting.
+#rc_default_runlevel="default"
+
+# on Linux and Hurd, this is the number of ttys allocated for logins
+# It is used in the consolefont, keymaps, numlock and termencoding
+# service scripts.
+rc_tty_number=12
+
+##############################################################################
+# LINUX CGROUPS RESOURCE MANAGEMENT
+
+# This sets the mode used to mount cgroups.
+# "hybrid" mounts cgroups version 2 on /sys/fs/cgroup/unified and
+# cgroups version 1 on /sys/fs/cgroup.
+# "legacy" mounts cgroups version 1 on /sys/fs/cgroup
+# "unified" mounts cgroups version 2 on /sys/fs/cgroup
+#rc_cgroup_mode="hybrid"
+
+# This is a list of controllers which should be enabled for cgroups version 2.
+# If hybrid mode is being used, controllers listed here will not be
+# available for cgroups version 1.
+# This is a global setting.
+#rc_cgroup_controllers=""
+
+# This variable contains the cgroups version 2 settings for your services.
+# If this is set in this file, the settings will apply to all services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the setting and value followed by a newline.
+# Multiple settings and values can be specified.
+# For example, you would use this to set the maximum memory and maximum
+# number of pids for a service.
+#rc_cgroup_settings="
+#memory.max 10485760
+#pids.max max
+#"
+#
+# For more information about the adjustments that can be made with
+# cgroups version 2, see Documentation/cgroups-v2.txt in the linux kernel
+# source tree.
+#rc_cgroup_settings=""
+
+# This switch controls whether or not cgroups version 1 controllers are
+# individually mounted under
+# /sys/fs/cgroup in hybrid or legacy mode.
+#rc_controller_cgroups="YES"
+
+# The following settings allow you to set up values for the cgroups version 1
+# controllers for your services.
+# They can be set in this file;, however, if you do this, the settings
+# will apply to all of your services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the names of the settings followed by their
+# values. Each variable can hold multiple settings.
+# For example, you would use this to set the cpu.shares setting in the
+# cpu controller to 512 for your service.
+# rc_cgroup_cpu="
+# cpu.shares 512
+# "
+#
+# For more information about the adjustments that can be made with
+# cgroups version 1, see Documentation/cgroups-v1/* in the linux kernel
+# source tree.
+
+# Set the blkio controller settings for this service.
+#rc_cgroup_blkio=""
+
+# Set the cpu controller settings for this service.
+#rc_cgroup_cpu=""
+
+# Add this service to the cpuacct controller (any value means yes).
+#rc_cgroup_cpuacct=""
+
+# Set the cpuset controller settings for this service.
+#rc_cgroup_cpuset=""
+
+# Set the devices controller settings for this service.
+#rc_cgroup_devices=""
+
+# Set the hugetlb controller settings for this service.
+#rc_cgroup_hugetlb=""
+
+# Set the memory controller settings for this service.
+#rc_cgroup_memory=""
+
+# Set the net_cls controller settings for this service.
+#rc_cgroup_net_cls=""
+
+# Set the net_prio controller settings for this service.
+#rc_cgroup_net_prio=""
+
+# Set the pids controller settings for this service.
+#rc_cgroup_pids=""
+
+# Set this to YES if you want all of the processes in a service's cgroup
+# killed when the service is stopped or restarted.
+# Be aware that setting this to yes means all of a service's
+# child processes will be killed. Keep this in mind if you set this to
+# yes here instead of for the individual services in
+# /etc/conf.d/<service>.
+# To perform this cleanup manually for a stopped service, you can
+# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
+# rc-service <service> cgroup_cleanup.
+# The process followed in this cleanup is the following:
+# 1. send stopsig (sigterm if it isn't set) to all processes left in the
+# cgroup immediately followed by sigcont.
+# 2. Send sighup to all processes in the cgroup if rc_send_sighup is
+# yes.
+# 3. delay for rc_timeout_stopsec seconds.
+# 4. send sigkill to all processes in the cgroup unless disabled by
+# setting rc_send_sigkill to no.
+# rc_cgroup_cleanup="NO"
+
+# If this is yes, we will send sighup to the processes in the cgroup
+# immediately after stopsig and sigcont.
+#rc_send_sighup="NO"
+
+# This is the amount of time in seconds that we delay after sending sigcont
+# and optionally sighup, before we optionally send sigkill to all
+# processes in the # cgroup.
+# The default is 90 seconds.
+#rc_timeout_stopsec="90"
+
+# If this is set to no, we do not send sigkill to all processes in the
+# cgroup.
+#rc_send_sigkill="YES"

etc/rc.conf.DragonFly

@@ -1,13 +0,0 @@
-##############################################################################
-# DragonFly BSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on DragonFly BSD:
-# ""        - nothing special
-# "jail"    - DragonFly BSD jails
-# "prefix"  - Prefix
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-

etc/rc.conf.FreeBSD

@@ -1,13 +0,0 @@
-##############################################################################
-# FreeBSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on FreeBSD:
-# ""        - nothing special
-# "jail"    - FreeBSD jails
-# "prefix"  - Prefix
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-

etc/rc.conf.GNU

@@ -1,14 +0,0 @@
-##############################################################################
-# GNU/Hurd SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on GNU/Hurd:
-# ""        - nothing special
-# "subhurd" - Hurd subhurds (to be checked)
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-# This is the number of tty's used in most of the rc-scripts (like
-# consolefont, numlock, etc ...)
-#rc_tty_number=6?

etc/rc.conf.GNU-kFreeBSD

@@ -1,11 +0,0 @@
-##############################################################################
-# GNU/kFreeBSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on GNU/kFreeBSD:
-# ""        - nothing special
-# "jail"    - FreeBSD jails (not yet implemented)
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""

etc/rc.conf.Linux

@@ -1,78 +0,0 @@
-##############################################################################
-# LINUX SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on Linux:
-# ""        - nothing special
-# "lxc"     - Linux Containers
-# "openvz"  - Linux OpenVZ
-# "prefix"  - Prefix
-# "uml"     - Usermode Linux
-# "vserver" - Linux vserver
-# "xen0"    - Xen0 Domain
-# "xenU"    - XenU Domain
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-
-# This is the number of tty's used in most of the rc-scripts (like
-# consolefont, numlock, etc ...)
-rc_tty_number=12
-
-##############################################################################
-# CGROUPS RESOURCE MANAGEMENT
-
-# If you have cgroups turned on in your kernel, this switch controls
-# whether or not a group for each controller is mounted under
-# /sys/fs/cgroup.
-# None of the other options in this section work if this is set to "NO".
-#rc_controller_cgroups="YES"
-
-# The following settings allow you to set up values for the cgroup
-# controllers for your services.
-# They can be set in this file;, however, if you do this, the settings
-# will apply to all of your services.
-# If you want different settings for each service, place the settings in
-# /etc/conf.d/foo for service foo.
-# The format is to specify the names of the settings followed by their
-# values. Each variable can hold multiple settings.
-# For example, you would use this to set the cpu.shares setting in the
-# cpu controller to 512 for your service.
-# rc_cgroup_cpu="
-# cpu.shares 512
-# "
-#
-#For more information about the adjustments that can be made with
-#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
-
-# Set the blkio controller settings for this service.
-#rc_cgroup_blkio=""
-
-# Set the cpu controller settings for this service.
-#rc_cgroup_cpu=""
-
-# Add this service to the cpuacct controller (any value means yes).
-#rc_cgroup_cpuacct=""
-
-# Set the cpuset controller settings for this service.
-#rc_cgroup_cpuset=""
-
-# Set the devices controller settings for this service.
-#rc_cgroup_devices=""
-
-# Set the memory controller settings for this service.
-#rc_cgroup_memory=""
-
-# Set the net_prio controller settings for this service.
-#rc_cgroup_net_prio=""
-
-# Set this to YES if yu want all of the processes in a service's cgroup
-# killed when the service is stopped or restarted.
-# This should not be set globally because it kills all of the service's
-# child processes, and most of the time this is undesirable. Please set
-# it in /etc/conf.d/<service>.
-# To perform this cleanup manually for a stopped service, you can
-# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
-# rc-service <service> cgroup_cleanup.
-# rc_cgroup_cleanup="NO"

etc/rc.conf.NetBSD

@@ -1,14 +0,0 @@
-##############################################################################
-# NetBSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on NetBSD:
-# ""        - nothing special
-# "prefix"  - Prefix
-# "xen0"    - Xen0 Domain
-# "xenU"    - XenU Domain
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-

etc/rc.conf.in

@@ -1,145 +0,0 @@
-# Global OpenRC configuration settings
-
-# Set to "YES" if you want the rc system to try and start services
-# in parallel for a slight speed improvement. When running in parallel we
-# prefix the service output with its name as the output will get
-# jumbled up.
-# WARNING: whilst we have improved parallel, it can still potentially lock
-# the boot process. Don't file bugs about this unless you can supply
-# patches that fix it without breaking other things!
-#rc_parallel="NO"
-
-# Set rc_interactive to "YES" and you'll be able to press the I key during
-# boot so you can choose to start specific services. Set to "NO" to disable
-# this feature. This feature is automatically disabled if rc_parallel is
-# set to YES.
-#rc_interactive="YES"
-
-# If we need to drop to a shell, you can specify it here.
-# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
-# otherwise /bin/sh
-# Linux users could specify /sbin/sulogin
-#rc_shell=/bin/sh
-
-# Do we allow any started service in the runlevel to satisfy the dependency
-# or do we want all of them regardless of state? For example, if net.eth0
-# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
-# both will be started, but services that depend on 'net' will work if either
-# one comes up. With rc_depend_strict="YES" we would require them both to
-# come up.
-#rc_depend_strict="YES"
-
-# rc_hotplug is a list of services that we allow to be hotplugged.
-# By default we do not allow hotplugging.
-# A hotplugged service is one started by a dynamic dev manager when a matching
-# hardware device is found.
-# This service is intrinsically included in the boot runlevel.
-# To disable services, prefix with a !
-# Example - rc_hotplug="net.wlan !net.*"
-# This allows net.wlan and any service not matching net.* to be plugged.
-# Example - rc_hotplug="*"
-# This allows all services to be hotplugged
-#rc_hotplug="*"
-
-# rc_logger launches a logging daemon to log the entire rc process to
-# /var/log/rc.log
-# NOTE: Linux systems require the devfs service to be started before
-# logging can take place and as such cannot log the sysinit runlevel.
-#rc_logger="YES"
-
-# Through rc_log_path you can specify a custom log file.
-# The default value is: /var/log/rc.log
-#rc_log_path="/var/log/rc.log"
-
-# If you want verbose output for OpenRC, set this to yes. If you want
-# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
-#rc_verbose=no
-
-# By default we filter the environment for our running scripts. To allow other
-# variables through, add them here. Use a * to allow all variables through.
-#rc_env_allow="VAR1 VAR2"
-
-# By default we assume that all daemons will start correctly.
-# However, some do not - a classic example is that they fork and return 0 AND
-# then child barfs on a configuration error. Or the daemon has a bug and the
-# child crashes. You can set the number of milliseconds start-stop-daemon
-# waits to check that the daemon is still running after starting here.
-# The default is 0 - no checking.
-#rc_start_wait=100
-
-# rc_nostop is a list of services which will not stop when changing runlevels.
-# This still allows the service itself to be stopped when called directly.
-#rc_nostop=""
-
-# rc will attempt to start crashed services by default.
-# However, it will not stop them by default as that could bring down other
-# critical services.
-#rc_crashed_stop=NO
-#rc_crashed_start=YES
-
-# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
-# output.
-#rc_nocolor=NO
-
-##############################################################################
-# MISC CONFIGURATION VARIABLES
-# There variables are shared between many init scripts
-
-# Set unicode to YES to turn on unicode support for keyboards and screens.
-#unicode="NO"
-
-# This is how long fuser should wait for a remote server to respond. The
-# default is 60 seconds, but  it can be adjusted here.
-#rc_fuser_timeout=60
-
-# Below is the default list of network fstypes.
-#
-# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
-# nfs nfs4 ocfs2 shfs smbfs
-#
-# If you would like to add to this list, you can do so by adding your
-# own fstypes to the following variable.
-#extra_net_fs_list=""
-
-##############################################################################
-# SERVICE CONFIGURATION VARIABLES
-# These variables are documented here, but should be configured in
-# /etc/conf.d/foo for service foo and NOT enabled here unless you
-# really want them to work on a global basis.
-# If your service has characters in its name which are not legal in
-# shell variable names and you configure the variables for it in this
-# file, those characters should be replaced with underscores in the
-# variable names as shown below.
-
-# Some daemons are started and stopped via start-stop-daemon.
-# We can set some things on a per service basis, like the nicelevel.
-#SSD_NICELEVEL="-19"
-
-# Pass ulimit parameters
-#rc_ulimit="-u 30"
-
-# It's possible to define extra dependencies for services like so
-#rc_config="/etc/foo"
-#rc_need="openvpn"
-#rc_use="net.eth0"
-#rc_after="clock"
-#rc_before="local"
-#rc_provide="!net"
-
-# You can also enable the above commands here for each service. Below is an
-# example for service foo.
-#rc_foo_config="/etc/foo"
-#rc_foo_need="openvpn"
-#rc_foo_after="clock"
-
-# Below is an example for service foo-bar. Note that the '-' is illegal
-# in a shell variable name, so we convert it to an underscore.
-# example for service foo-bar.
-#rc_foo_bar_config="/etc/foo-bar"
-#rc_foo_bar_need="openvpn"
-#rc_foo_bar_after="clock"
-
-# You can also remove dependencies.
-# This is mainly used for saying which servies do NOT provide net.
-#rc_net_tap0_provide="!net"
-

etc/rc.devd

@@ -1,6 +1,13 @@
 #!/bin/sh
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+#    except according to the terms contained in the LICENSE file.
 
 # Inform RC that we are in the background and hotplugged
 IN_BACKGROUND=yes

etc/rc.in

@@ -1,6 +1,13 @@
 #!@SHELL@
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+#    except according to the terms contained in the LICENSE file.
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)
@@ -10,9 +17,9 @@
 trap : SIGINT
 trap "echo 'Boot interrupted'; exit 1" SIGQUIT
 
-/sbin/rc sysinit || exit 1
-/sbin/rc boot || exit 1
-/sbin/rc default
+/sbin/openrc sysinit || exit 1
+/sbin/openrc boot || exit 1
+/sbin/openrc default
 
 # We don't actually care if rc default worked or not, we should exit 0
 # to allow logins

etc/rc.shutdown.in

@@ -1,17 +1,24 @@
 #!@SHELL@
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+#    except according to the terms contained in the LICENSE file.
 
 # Handle interrupts
 trap : SIGINT SIGQUIT
 
 # Try and use stuff in /lib over anywhere else so we can shutdown
 # local mounts correctly.
-LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}" ; export LD_LIBRARY_PATH
+LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LD_LIBRARY_PATH}" ; export LD_LIBRARY_PATH
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)
 [ -z "$TERM" -o "$TERM" = "dumb" ] && TERM="@TERM@" && export TERM
 
 action=${1:-shutdown}
-exec /sbin/rc "${action}"
+exec /sbin/openrc "${action}"

guide.md

@@ -0,0 +1,285 @@
+# Purpose and description
+
+OpenRC is an init system for Unixoid operating systems. It takes care of 
+startup and shutdown of the whole system, including services.
+
+It evolved out of the Gentoo "Baselayout" package which was a custom pure-shell 
+startup solution. (This was both hard to maintain and debug, and not very 
+performant)
+
+Most of the core parts are written in C99 for performance and flexibility 
+reasons, while everything else is posix sh.
+The License is 2-clause BSD
+
+Current size is about 10k LoC C, and about 4k LoC shell.
+
+OpenRC is known to work on Linux, many BSDs (FreeBSD, OpenBSD, DragonFlyBSD at 
+least) and HURD.
+
+Services are stateful (i.e. `start`; `start` will lead to "it's already started")
+
+# Startup
+
+Usually PID1 (aka. `init`) calls the OpenRC binary (`/sbin/openrc` by default).
+(The default setup assumes sysvinit for this)
+
+openrc scans the runlevels (default: `/etc/runlevels`) and builds a dependency
+graph, then starts the needed service scripts, either serialized (default) or in 
+parallel.
+
+When all the init scripts are started openrc terminates. There is no persistent 
+daemon. (Integration with tools like monit, runit or s6 can be done)
+
+# Shutdown
+
+On change to runlevel 0/6 or running `reboot`, `halt` etc., openrc stops all
+services that are started and runs the services in the `shutdown` runlevel.
+
+# Modifying Service Scripts
+
+Any service can, at any time, be started/stopped/restarted by executing 
+`rc-service someservice start`, `rc-service someservice stop`, etc.
+Another, less preferred method, is to run the service script directly,
+e.g. `/etc/init.d/service start`, `/etc/init.d/service stop`, etc.
+
+OpenRC will take care of dependencies, e.g starting apache will start network 
+first, and stopping network will stop apache first.
+
+There is a special command `zap` that makes OpenRC 'forget' that a service is
+started; this is mostly useful to reset a crashed service to stopped state 
+without invoking the (possibly broken) stop function of the service script.
+
+Calling `openrc` without any arguments will try to reset all services so
+that the current runlevel is satisfied; if you manually started apache it will be 
+stopped, and if squid died but is in the current runlevel it'll be restarted.
+
+# Runlevels
+
+OpenRC has a concept of runlevels, similar to what sysvinit historically 
+offered. A runlevel is basically a collection of services that needs to be 
+started. Instead of random numbers they are named, and users can create their 
+own if needed. This allows, for example, to have a default runlevel with 
+"everything" enabled, and a "powersaving" runlevel where some services are 
+disabled.
+
+The `rc-status` helper will print all currently active runlevels and the state
+of init scripts in them:
+
+```
+# rc-status
+ * Caching service dependencies ... [ ok ]
+Runlevel: default
+ modules                     [  started  ]
+ lvm                         [  started  ]
+```
+
+All runlevels are represented as folders in `/etc/runlevels/` with symlinks to 
+the actual init scripts.
+
+Calling openrc with an argument (`openrc default`) will switch to that
+runlevel; this will start and stop services as needed.
+
+Managing runlevels is usually done through the `rc-update` helper, but could of 
+course be done by hand if desired.
+e.g. `rc-update add nginx default` - add nginx to the default runlevel
+Note: This will not auto-start nginx! You'd still have to trigger `rc` or run 
+the initscript by hand.
+
+FIXME: Document stacked runlevels
+
+The default startup uses the runlevels `boot`, `sysinit` and `default`, in that 
+order. Shutdown uses the `shutdown` runlevel.
+
+
+# Syntax of Service Scripts
+
+Service scripts are shell scripts. OpenRC aims at using only the standardized 
+POSIX sh subset for portability reasons. The default interpreter (build-time 
+toggle) is `/bin/sh`, so using for example mksh is not a problem.
+
+OpenRC has been tested with busybox sh, ash, dash, bash, mksh, zsh and possibly 
+others. Using busybox sh has been difficult as it replaces commands with 
+builtins that don't offer the expected features.
+
+The interpreter for initscripts is `#!/sbin/openrc-run`.
+Not using this interpreter will break the use of dependencies and is not 
+supported. (iow: if you insist on using `#!/bin/sh` you're on your own)
+
+A `depend` function declares the dependencies of this service script.
+All scripts must have start/stop/status functions, but defaults are provided.
+Extra functions can be added easily:
+
+```
+extra_commands="checkconfig"
+checkconfig() {
+	doSomething
+}
+```
+
+This exports the checkconfig function so that `/etc/init.d/someservice 
+checkconfig` will be available, and it "just" runs this function.
+
+While commands defined in `extra_commands` are always available, commands
+defined in `extra_started_commands` will only work when the service is started
+and those defined in `extra_stopped_commands` will only work when the service is
+stopped. This can be used for implementing graceful reload and similar
+behaviour.
+
+Adding a restart function will not work, this is a design decision within 
+OpenRC. Since there may be dependencies involved (e.g. network -> apache) a 
+restart function is in general not going to work. 
+restart is internally mapped to `stop()` + `start()` (plus handling dependencies).
+If a service needs to behave differently when it is being restarted vs
+started or stopped, it should test the `$RC_CMD` variable, for example:
+
+```
+[ "$RC_CMD" = restart ] && do_something
+```
+
+# The Depend Function
+
+This function declares the dependencies for a service script. This
+determines the order the service scripts start.
+
+```
+depend() {
+	need net
+	use dns logger netmount
+	want coolservice
+}
+```
+
+`need` declares a hard dependency - net always needs to be started before this 
+	service does
+
+`use` is a soft dependency - if dns, logger or netmount is in this runlevel 
+	start it before, but we don't care if it's not in this runlevel.
+	`want` is between need and use - try to start coolservice if it is
+	installed on the system, regardless of whether it is in the
+	runlevel, but we don't care if it starts.
+
+`before` declares that we need to be started before another service
+
+`after` declares that we need to be started after another service, without 
+	creating a dependency (so on calling stop the two are independent)
+
+`provide` allows multiple implementations to provide one service type, e.g.:
+	`provide cron` is set in all cron-daemons, so any one of them started 
+	satisfies a cron dependency
+
+`keyword` allows platform-specific overrides, e.g. `keyword -lxc` makes this 
+	service script a noop in lxc containers. Useful for things like keymaps, 
+	module loading etc. that are either platform-specific or not available 
+	in containers/virtualization/...
+
+FIXME: Anything missing in this list?
+
+# The Default Functions
+
+All service scripts are assumed to have the following functions:
+
+```
+start()
+stop()
+status()
+```
+
+There are default implementations in `lib/rc/sh/openrc-run.sh` - this allows very 
+compact service scripts. These functions can be overridden per service script as 
+needed.
+
+The default functions assume the following variables to be set in the service 
+script:
+
+```
+command=
+command_args=
+pidfile=
+```
+
+Thus the 'smallest' service scripts can be half a dozen lines long
+
+# The Magic of `conf.d`
+
+Most service scripts need default values. It would be fragile to
+explicitly source some arbitrary files. By convention `openrc-run` will source
+the matching file in `/etc/conf.d/` for any script in `/etc/init.d/`
+
+This allows you to set random startup-related things easily. Example:
+
+```
+conf.d/foo:
+START_OPTS="--extraparameter sausage"
+
+init.d/foo:
+start() {
+	/usr/sbin/foo-daemon ${STARTOPTS}
+}
+```
+
+The big advantage of this split is that most of the time editing of the init 
+script can be avoided.
+
+# Start-Stop-Daemon
+
+OpenRC has its own modified version of s-s-d, which is historically related and 
+mostly syntax-compatible to Debian's s-s-d, but has been rewritten from scratch.
+
+It helps with starting daemons, backgrounding, creating PID files and many 
+other convenience functions related to managing daemons.
+
+# `/etc/rc.conf`
+
+This file manages the default configuration for OpenRC, and it has examples of 
+per-service-script variables.
+
+Among these are `rc_parallel` (for parallelized startup), `rc_log` (logs all boot 
+messages to a file), and a few others.
+
+# ulimit and CGroups
+
+Setting `ulimit` and `nice` values per service can be done through the
+`rc_ulimit` variable.
+
+Under Linux, OpenRC can use cgroups for process management as well. Once
+the kernel is configured appropriately, the `rc_cgroup_mode` setting in
+/etc/rc.conf should be used to control whether cgroups version one,,
+two, or both are used. The default is to use both if they are available.
+
+By changing certain settings in the service's `conf.d` file limits can be
+enforced per service. These settings are documented in detail in the
+default /etc/rc.conf under `LINUX CGROUPS RESOURCE MANAGEMENT`.
+
+# Dealing with Orphaned Processes
+
+It is possible to get into a state where there are orphaned processes
+running which were part of a service. For example, if you are monitoring
+a service with supervise-daemon and supervise-daemon dies for an unknown
+reason. The way to deal with this will be different for each system.
+
+On Linux systems with cgroups enabled, the cgroup_cleanup command is
+added to all services. You can run it manually, when the service is
+stopped, by using:
+
+```
+# rc-service someservice cgroup_cleanup
+```
+
+The `rc_cgroup_cleanup` setting can be changed to yes to make this
+happen automatically when the service is stopped.
+
+
+# Caching
+
+For performance reasons OpenRC keeps a cache of pre-parsed initscript metadata
+(e.g. `depend`). The default location for this is `/${RC_SVCDIR}/cache`.
+
+The cache uses `mtime` to check for file staleness. Should any service script
+change it'll re-source the relevant files and update the cache
+
+# Convenience functions
+
+OpenRC has wrappers for many common output tasks in libeinfo.
+This allows to print colour-coded status notices and other things.
+To make the output consistent the bundled initscripts all use ebegin/eend to 
+print nice messages.

init.d.misc/avahi-dnsconfd.in

@@ -1,15 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
-
-command=@PKG_PREFIX@/sbin/avahi-dnsconfd
-command_args="$avahi_dnsconfd_args -D"
-pidfile=@VARBASE@/run/avahi-dnsconfd.pid
-name="Avahi DNS Configuration Daemon"
-
-depend()
-{
-	use dns
-	need localmount dbus
-	after bootmisc
-}

init.d.misc/avahid.in

@@ -1,15 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
-
-command=@PKG_PREFIX@/sbin/avahi-daemon
-command_args="$avahid_args -D"
-pidfile=@VARBASE@/run/avahi-daemon/pid
-name="Avahi Service Advertisement Daemon"
-
-depend()
-{
-	use dns
-	need localmount dbus
-	after bootmisc
-}

init.d.misc/dbus.in

@@ -1,19 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
-
-command=@PKG_PREFIX@/bin/dbus-daemon
-pidfile=@VARBASE@/run/dbus/pid
-command_args="${dbusd_args---system}"
-name="Message Bus Daemon"
-
-depend()
-{
-	need localmount net
-	after bootmisc
-}
-
-start_pre()
-{
-	mkdir -p $(dirname $pidfile)
-}

init.d.misc/dhcpcd.in

@@ -1,27 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
-
-command=/sbin/dhcpcd
-pidfile=/var/run/dhcpcd.pid
-command_args=-q
-name="DHCP Client Daemon"
-
-depend()
-{
-	provide net
-	need localmount
-	use logger
-	after bootmisc modules
-	before dns
-}
-
-stop_pre()
-{
-	# When shutting down, kill dhcpcd but preserve network
-	# We do this as /var/run/dhcpcd could be cleaned out when we
-	# return to multiuser.
-	if yesno $RC_GOINGDOWN; then
-		: ${stopsig:=SIGKILL}
-	fi
-}

init.d.misc/dnsmasq.in

@@ -1,24 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
-
-command=@PKG_PREFIX@/sbin/dnsmasq
-command_args=$dnsmasq_args
-pidfile=@VARBASE@/run/dnsmasq.pid
-required_files=/etc/dnsmasq.conf
-
-extra_started_commands="reload"
-
-depend()
-{
-	provide dns
-	need localmount net
-	after bootmisc
-}
-
-reload()
-{
-	ebegin "Reloading $RC_SVCNAME"
-	start-stop-daemon --signal SIGHUP --pidfile "$pidfile"
-	eend $?
-}

init.d.misc/hald.in

@@ -1,13 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
-
-command=@PKG_PREFIX@/sbin/hald
-pidfile=@VARBASE@/run/hald/hald.pid
-command_args=$hald_args
-name="Hardware Abstraction Layer Daemon"
-
-depend()
-{
-	need dbus
-}

init.d.misc/polkitd.in

@@ -1,13 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
-
-command=@PKG_PREFIX@/sbin/polkitd
-pidfile=@VARBASE@/run/polkitd/polkitd.pid
-command_args="$polkitd_args"
-name="PolicyKit Daemon"
-
-depend()
-{
-	need dbus
-}

init.d/.gitignore

@@ -1,3 +1,6 @@
+agetty
+binfmt
+modules-load
 bootmisc
 fsck
 hostname
@@ -10,7 +13,6 @@ network
 root
 savecache
 swap
-swapfiles
 sysctl
 urandom
 devfs
@@ -22,8 +24,11 @@ killprocs
 modules
 mount-ro
 mtab
+net-online
 numlock
+osclock
 procfs
+s6-svscan
 staticroute
 sysfs
 devdb
@@ -33,6 +38,7 @@ pf
 rarpd
 rc-enabled
 rpcbind
+runsvdir
 savecore
 swap-blk
 swclock
@@ -40,5 +46,3 @@ syslogd
 termencoding
 ttys
 wscons
-tmpfiles.dev
-tmpfiles.setup

init.d/Makefile

@@ -2,8 +2,8 @@ include ../mk/net.mk
 
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in loopback.in \
-	netmount.in root.in savecache.in swap.in swapfiles.in \
-	tmpfiles.setup.in swclock.in sysctl.in urandom.in ${SRCS-${OS}}
+	netmount.in osclock.in root.in savecache.in swap.in swclock.in \
+	sysctl.in runsvdir.in urandom.in s6-svscan.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
 # Are we installing our network scripts?
@@ -15,15 +15,15 @@ MK=	../mk
 include ${MK}/os.mk
 
 # Generic BSD scripts
-SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-		rpcbind.in savecore.in syslogd.in
+SRCS-FreeBSD=	hostid.in modules.in moused.in newsyslog.in pf.in rarpd.in \
+		rc-enabled.in rpcbind.in savecore.in syslogd.in
 # These are FreeBSD specific
 SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in encswap.in ipfw.in \
-		mixer.in nscd.in powerd.in syscons.in
+		modules-load.in mixer.in nscd.in powerd.in syscons.in
 
-SRCS-Linux=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
-		killprocs.in modules.in mount-ro.in mtab.in numlock.in \
-		procfs.in sysfs.in termencoding.in tmpfiles.dev.in
+SRCS-Linux=	agetty.in binfmt.in devfs.in dmesg.in hwclock.in consolefont.in \
+	keymaps.in killprocs.in modules.in modules-load.in mount-ro.in mtab.in \
+	numlock.in procfs.in net-online.in sysfs.in termencoding.in
 
 # Generic BSD scripts
 SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
@@ -31,9 +31,6 @@ SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 # These are NetBSD specific
 SRCS-NetBSD+=	devdb.in swap-blk.in ttys.in wscons.in
 
-%.in: %${SFX}
-	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@
-
 include ${MK}/scripts.mk
 
 _installafter_: realinstall

init.d/adjkerntz.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 extra_commands="save"
 
@@ -16,6 +23,7 @@ fi
 
 depend()
 {
+	after swclock
 	provide clock
 	# BSD adjkerntz needs to be able to write to /etc
 	if [ "$clock" = "UTC" -a -e /etc/wall_cmos_clock ] ||

init.d/agetty.in

@@ -0,0 +1,33 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2017 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+description="start agetty on a terminal line"
+supervisor=supervise-daemon
+port="${RC_SVCNAME#*.}"
+term_type="${term_type:-linux}"
+command=/sbin/agetty
+command_args_foreground="${agetty_options} ${port} ${baud} ${term_type}"
+pidfile="/run/${RC_SVCNAME}.pid"
+export EINFO_QUIET="${quiet:-yes}"
+
+depend() {
+	after local
+	keyword -prefix
+}
+
+start_pre() {
+	if [ -z "$port" ]; then
+		eerror "${RC_SVCNAME} cannot be started directly. You must create"
+		eerror "symbolic links to it for the ports you want to start"
+		eerror "agetty on and add those to the appropriate runlevels."
+		return 1
+	fi
+}

init.d/binfmt.in

@@ -0,0 +1,27 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+description="Register misc binary format handlers"
+
+depend()
+{
+	after clock procfs
+	use modules devfs
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
+}
+
+start()
+{
+	ebegin "Loading custom binary format handlers"
+	"$RC_LIBEXECDIR"/sh/binfmt.sh
+	eend $?
+	return 0
+}

init.d/bootmisc.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 depend()
 {
@@ -64,7 +71,8 @@ cleanup_var_run_dir()
 	ebegin "Cleaning /var/run"
 	for x in $(find /var/run ! -type d ! -name utmp \
 		! -name random-seed ! -name dev.db \
-		! -name ld-elf.so.hints ! -name ld.so.hints);
+		! -name ld-elf.so.hints ! -name ld-elf32.so.hints \
+		! -name ld.so.hints);
 	do
 		# Clean stale sockets
 		if [ -S "$x" ]; then
@@ -119,11 +127,31 @@ clean_run()
 {
 	[ "$RC_SYS" = VSERVER -o "$RC_SYS" = LXC ] && return 0
 	local dir
+	# If / is still read-only due to a problem, this will fail!
+	if ! checkpath -W /; then
+		ewarn "/ is not writable; unable to clean up underlying /run"
+		return 1
+	fi
+	if ! checkpath -W /tmp; then
+		ewarn "/tmp is not writable; unable to clean up underlying /run"
+		return 1
+	fi
+	# Now we know that we can modify /tmp and /
+	# if mktemp -d fails, it returns an EMPTY string
+	# STDERR: mktemp: failed to create directory via template ‘/tmp/tmp.XXXXXXXXXX’: Read-only file system
+	# STDOUT: ''
+	rc=0
 	dir=$(mktemp -d)
-	mount --bind / $dir
-	rm -rf $dir/run/*
-	umount $dir
-	rm -rf $dir
+	if [ -n "$dir" -a -d $dir -a -w $dir ]; then
+		mount --bind / $dir && rm -rf $dir/run/* || rc=1
+		umount $dir && rmdir $dir
+	else
+		rc=1
+	fi
+	if [ $rc -ne 0 ]; then
+		ewarn "Could not clean up underlying /run on /"
+		return 1
+	fi
 }
 
 start()
@@ -193,10 +221,16 @@ start()
 	if yesno $log_dmesg; then
 		if $logw || checkpath -W /var/log; then
 			# Create an 'after-boot' dmesg log
-			if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ -a "$RC_SYS" != LXC ]; then
-				dmesg > /var/log/dmesg
-				chmod 640 /var/log/dmesg
-			fi
+			case "$RC_SYS" in
+				VSERVER|OPENVZ|LXC|SYSTEMD-NSPAWN) ;;
+				*)
+					if yesno ${previous_dmesg:-no}; then
+						mv /var/log/dmesg /var/log/dmesg.old
+					fi
+					dmesg > /var/log/dmesg
+					chmod 640 /var/log/dmesg
+					;;
+			esac
 		fi
 	fi
 
@@ -207,7 +241,7 @@ stop()
 {
 	# Write a halt record if we're shutting down
 	if [ "$RC_RUNLEVEL" = shutdown ]; then
-		[ "$RC_UNAME" = Linux ] && halt -w
+		[ "$RC_UNAME" = Linux ] && openrc-shutdown -w
 		if [ "$RC_SYS" = OPENVZ ]; then
 			yesno $RC_REBOOT && printf "" >/reboot
 		fi

init.d/consolefont.in

@@ -1,14 +1,21 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Sets a font for the consoles."
 
 depend()
 {
 	need localmount termencoding
-	after hotplug bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	after hotplug bootmisc modules
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
 
 start()

init.d/devd.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 command=/sbin/devd
 command_args=$devd_args

init.d/devdb.in

@@ -1,11 +1,19 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2008-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Creates the dev database"
 
 depend()
 {
+	after clock
 	need localmount
 }
 

init.d/devfs.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Set up the /dev directory"
 
@@ -8,7 +15,7 @@ depend()
 {
 	provide dev-mount
 	before dev
-	keyword -prefix -vserver -lxc
+	keyword -docker -lxc -prefix -systemd-nspawn -vserver
 }
 
 mount_dev()

init.d/dmesg.in

@@ -1,13 +1,20 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Set the dmesg level for a cleaner boot"
 
 depend()
 {
 	before dev modules
-	keyword -lxc -prefix -vserver
+	keyword -docker -lxc -prefix -systemd-nspawn -vserver
 }
 
 start()

init.d/dumpon.in

@@ -1,10 +1,18 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Configures a specific kernel dump device."
 
 depend() {
+	after clock
 	need swap
 	keyword -jail -prefix
 }

init.d/fsck.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Check and repair filesystems according to /etc/fstab"
 _IFS="
@@ -8,12 +15,13 @@ _IFS="
 
 depend()
 {
+	after clock
 	use dev clock modules
-	keyword -jail -openvz -prefix -timeout -vserver -lxc -uml
+	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -timeout -vserver -uml
 }
 
 _abort() {
-	rc-abort
+	yesno ${fsck_abort_on_errors:-yes} && rc-abort
 	return 1
 }
 

init.d/hostid.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 extra_commands="reset"
 : ${hostid_file:=/etc/hostid}
@@ -8,6 +15,7 @@ extra_commands="reset"
 depend()
 {
 	use root
+	after clock
 	before devd net
 	keyword -jail -prefix
 }

init.d/hostname.in

@@ -1,19 +1,38 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Sets the hostname of the machine."
 
-depend() {
-	keyword -prefix -lxc
+depend()
+{
+	after clock
+	keyword -docker -lxc -prefix -systemd-nspawn
 }
 
 start()
 {
-	# HOSTNAME variable used to be defined in caps in conf.d/hostname.
-	# It is also a magic variable in bash.
-	hostname=${hostname-${HOSTNAME-localhost}} # checkbashisms: false positive
-	ebegin "Setting hostname to $hostname"
-	hostname "$hostname"
+	local h source x
+	if [ -s @SYSCONFDIR@/hostname ] && [ -r @SYSCONFDIR@/hostname ]; then
+		read h x <@SYSCONFDIR@/hostname
+		source="from @SYSCONFDIR@/hostname"
+	else
+		# HOSTNAME variable used to be defined in caps in conf.d/hostname.
+		# It is also a magic variable in bash.
+		h=${hostname:-${HOSTNAME}} # checkbashisms: false positive (HOSTNAME var)
+	fi
+	if [ -z "$h" ]; then
+		einfo "Using default system hostname"
+		return 0
+	fi
+	ebegin "Setting hostname to $h $source"
+	hostname "$h"
 	eend $? "Failed to set the hostname"
 }

init.d/hwclock.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 extra_commands="save show"
 
@@ -23,12 +30,11 @@ fi
 depend()
 {
 	provide clock
+	want modules
 	if yesno $clock_adjfile; then
 		use root
-	else
-		before *
 	fi
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
 
 setupopts()
@@ -62,9 +68,28 @@ _hwclock()
 	return 1
 }
 
+get_noadjfile()
+{
+	if ! yesno $clock_adjfile; then
+		# Some implementations don't handle adjustments
+		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
+			echo --noadjfile
+		fi
+	fi
+}
+
+rtc_exists()
+{
+	local rtc=
+	for rtc in /dev/rtc /dev/rtc[0-9]*; do
+		[ -e "$rtc" ] && break
+	done
+	[ -e "$rtc" ]
+}
+
 start()
 {
-	local retval=0 errstr=""
+	local retval=0 errstr="" modname
 	setupopts
 
 	if [ -z "$utc_cmd" ]; then
@@ -74,26 +99,27 @@ start()
 
 	ebegin "Setting system clock using the hardware clock [$utc]"
 	if [ -e /proc/modules ]; then
-		local rtc=
-		for rtc in /dev/rtc /dev/rtc[0-9]*; do
-			[ -e "$rtc" ] && break
-		done
-		if [ ! -e "${rtc}" ]; then
-			modprobe -q rtc-cmos || modprobe -q rtc || modprobe -q genrtc
+		if ! rtc_exists; then
+			for x in rtc-cmos rtc genrtc; do
+				modprobe -q $x && rtc_exists && modname="$x" && break
+			done
+			[ -n "$modname" ] &&
+				ewarn "The $modname module needs to be configured in" \
+					"@SYSCONFDIR@/conf.d/modules or built in."
 		fi
 	fi
 
 	# Always set the kernel's time zone.
-	_hwclock --systz $utc_cmd $clock_args
+	_hwclock --systz $utc_cmd $(get_noadjfile) $clock_args
 	: $(( retval += $? ))
 
 	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
-		_hwclock --adjust $utc_cmd
+		_hwclock --adjust $utc_cmd $(get_noadjfile)
 		: $(( retval += $? ))
 	fi
 
 	if yesno ${clock_hctosys:-YES}; then
-		_hwclock --hctosys $utc_cmd $clock_args
+		_hwclock --hctosys $utc_cmd $(get_noadjfile) $clock_args
 		: $(( retval += $? ))
 	fi
 
@@ -115,14 +141,7 @@ stop()
 
 	ebegin "Setting hardware clock using the system clock" "[$utc]"
 
-	if ! yesno $clock_adjfile; then
-		# Some implementations don't handle adjustments
-		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
-			utc_cmd="$utc_cmd --noadjfile"
-		fi
-	fi
-
-	_hwclock --systohc $utc_cmd $clock_args
+	_hwclock --systohc $utc_cmd $(get_noadjfile) $clock_args
 	retval=$?
 
 	eend $retval "Failed to sync clocks"
@@ -137,5 +156,5 @@ save()
 show()
 {
 	setupopts
-	hwclock --show "$utc_cmd" $clock_args
+	hwclock --show "$utc_cmd" $(get_noadjfile) $clock_args
 }

init.d/ipfw.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 # This is based on /etc/rc.firewall and /etc/rc.firewall6 from FreeBSD
 

init.d/keymaps.in

@@ -1,14 +1,21 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Applies a keymap for the consoles."
 
 depend()
 {
 	need localmount termencoding
-	after bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	after bootmisc clock
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
 
 start()

init.d/killprocs.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Kill all processes so we can unmount disks cleanly."
 
@@ -12,11 +19,9 @@ depend()
 start()
 {
 	ebegin "Terminating remaining processes"
-	killall5 -15 ${killall5_opts}
-	sleep 1
+	kill_all 15 ${killall5_opts}
 	eend 0
 	ebegin "Killing remaining processes"
-	killall5 -9 ${killall5_opts}
-	sleep 1
+	kill_all 9 ${killall5_opts}
 	eend 0
 }

init.d/local.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Executes user programs in @SYSCONFDIR@/local.d"
 
@@ -14,12 +21,13 @@ start()
 {
 	ebegin "Starting local"
 
-	local file has_errors=0 retval
+	local file has_errors=0 redirect retval
+	yesno $rc_verbose || redirect='> /dev/null 2>&1'
 	eindent
 	for file in @SYSCONFDIR@/local.d/*.start; do
 		if [ -x "${file}" ]; then
 			vebegin "Executing \"${file}\""
-			"${file}" 2>&1 >/dev/null
+			eval "${file}" $redirect
 			retval=$?
 			if [ ${retval} -ne 0 ]; then
 				has_errors=1
@@ -52,12 +60,13 @@ stop()
 {
 	ebegin "Stopping local"
 
-	local file has_errors=0 retval
+	local file has_errors=0 redirect retval
+	yesno $rc_verbose || redirect='> /dev/null 2>&1'
 	eindent
 	for file in @SYSCONFDIR@/local.d/*.stop; do
 		if [ -x "${file}" ]; then
 			vebegin "Executing \"${file}\""
-			"${file}" 2>&1 >/dev/null
+			eval "${file}" $redirect
 			retval=$?
 			if [ ${retval} -ne 0 ]; then
 				has_errors=1

init.d/localmount.in

@@ -1,23 +1,31 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Mounts disks and swap according to /etc/fstab."
 
 depend()
 {
 	need fsck
-	use lvm modules mtab
-	after lvm modules
-	keyword -jail -prefix -vserver -lxc
+	use lvm modules mtab root
+	after clock lvm modules root
+	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
 }
 
 start()
 {
 	# Mount local filesystems in /etc/fstab.
-	local types="noproc" x= no_netdev=
+	# The types variable must start with no, and must be a type
+	local critical= types="noproc" x= no_netdev= rc=
 	for x in $net_fs_list $extra_net_fs_list; do
-		types="${types},no${x}"
+		types="${types},${x}"
 	done
 
 	if [ "$RC_UNAME" = Linux ]; then
@@ -29,9 +37,20 @@ start()
 	ebegin "Mounting local filesystems"
 	mount -at "$types" $no_netdev
 	eend $? "Some local filesystem failed to mount"
-
-	# Always return 0 - some local mounts may not be critical for boot
-	return 0
+	rc=$?
+	if [ -z "$critical_mounts" ]; then
+		rc=0
+	else
+		for x in ${critical_mounts}; do
+		fstabinfo -q $x || continue
+		if ! mountinfo -q $x; then
+			critical=x
+			eerror "Failed to mount $x"
+		fi
+		done
+		[ -z "$critical" ] && rc=0
+	fi
+	return $rc
 }
 
 stop()
@@ -70,17 +89,19 @@ stop()
 			sync
 		fi
 
-		local aufs_branch aufs_mount_dir aufs_mount_point aufs_si_dir aufs_si_id
-		for aufs_si_dir in /sys/fs/aufs/*; do
-			aufs_mount_dir=${aufs_si_dir#/sys/fs/aufs/}
-			aufs_si_id="$(printf "%s" $aufs_mount_dir | sed 's/_/=/g')"
+		local aufs_branch aufs_mount_point aufs_si_id aufs_br_id branches
+		for aufs_si_dir in /sys/fs/aufs/si*; do
+			[ -d "${aufs_si_dir}" ] || continue
+			aufs_si_id="si=${aufs_si_dir#/sys/fs/aufs/si_}"
 			aufs_mount_point="$(mountinfo -o ${aufs_si_id})"
-			for x in $aufs_si_dir/br[0-9][0-9][0-9]; do
+			branches="$aufs_si_dir/br[0-9] $aufs_si_dir/br[0-9][0-9] $aufs_si_dir/br[0-9][0-9][0-9]"
+			for x in $branches; do
+				[ -e "${x}" ] || continue
 				aufs_branch=$(sed 's/=.*//g' $x)
 				eindent
 				if ! mount -o "remount,del:$aufs_branch" "$aufs_mount_point" > /dev/null 2>&1; then
-					ewarn "Failed to remove branch $aufs_branch from aufs \
-						$aufs_mount_point"
+					ewarn "Failed to remove branch $aufs_branch from aufs" \
+					"$aufs_mount_point"
 				fi
 				eoutdent
 				sync

init.d/loopback.in

@@ -1,12 +1,20 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2013 William Hubbs <w.d.hubbs@gmail.com>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2013-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Configures the loopback interface."
 
 depend()
 {
-	keyword -jail -prefix -vserver
+	after clock
+	keyword -jail -prefix -systemd-nspawn -vserver
 }
 
 start()
@@ -14,22 +22,14 @@ start()
 	if [ "$RC_UNAME" = Linux ]; then
 		ebegin "Bringing up network interface lo"
 		if command -v ip > /dev/null 2>&1; then
-			ip addr add 127.0.0.1/8 dev lo brd + scope host
-			ip route add 127.0.0.0/8 dev lo scope host
+			ip addr add 127.0.0.1/8 dev lo brd +
 			ip link set lo up
 		else
 			ifconfig lo 127.0.0.1 netmask 255.0.0.0
-			route add -net 127.0.0.0 netmask 255.0.0.0 gw 127.0.0.1
 		fi
 	else
 		ebegin "Bringing up network interface lo0"
 		ifconfig lo0 127.0.0.1 netmask 255.0.0.0
-		route -q add -inet 127.0.0.0 -netmask 255.0.0.0 127.0.0.1
 	fi
 	eend $?
 }
-
-stop()
-{
-	return 0
-}

init.d/mixer.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 extra_commands="restore"
 

init.d/modules-load.in

@@ -0,0 +1,72 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2016 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+description="Loads a list of modules from systemd-compatible locations."
+
+depend()
+{
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
+}
+
+find_modfiles()
+{
+	local dirs="/usr/lib/modules-load.d /run/modules-load.d /etc/modules-load.d"
+	local basenames files fn x y
+	for x in $dirs; do
+		[ ! -d $x ] && continue
+		for y in $x/*.conf; do
+			[ -f $y ] && basenames="${basenames}\n${y##*/}"
+		done
+	done
+	basenames=$(printf "$basenames" | sort -u)
+	for x in $basenames; do
+		for y in $dirs; do
+			[ -r $y/$x ] &&
+				fn=$y/$x
+		done
+		files="$files $fn"
+	done
+	echo $files
+}
+
+load_modules()
+{
+	local file m modules rc x
+	file=$1
+	[ -z "$file" ] && return 0
+	while read m x; do
+		case $m in
+			\;*) continue ;;
+			\#*) continue ;;
+			*) modules="$modules $m"
+			;;
+		esac
+	done < $file
+	for x in $modules; do
+		ebegin "Loading module $x"
+		case "$RC_UNAME" in
+			FreeBSD) kldload "$x"; rc=$? ;;
+			Linux) modprobe --use-blacklist -q "$x"; rc=$? ;;
+			*) ;;
+		esac
+		eend $rc "Failed to load $x"
+	done
+}
+
+start()
+{
+	local x
+	files=$(find_modfiles)
+	for x in $files; do
+		load_modules $x
+	done
+	return 0
+}

init.d/modules.in

@@ -1,18 +1,37 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Loads a user defined list of kernel modules."
 
 depend()
 {
 	use isapnp
-	keyword -openvz -prefix -vserver -lxc
+	want modules-load
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
-start()
+FreeBSD_modules()
 {
-	# Should not fail if kernel do not have module
+	local cnt=0 x
+	for x in $modules; do
+		ebegin "Loading module $x"
+		kldload "$x"
+		eend $? "Failed to load $x" && : $(( cnt += 1 ))
+	done
+	einfo "Autoloaded $cnt module(s)"
+}
+
+Linux_modules()
+{
+	# Should not fail if kernel does not have module
 	# support compiled in ...
 	[ ! -f /proc/modules ] && return 0
 
@@ -29,22 +48,21 @@ start()
 		x=${x%.*}
 	done
 
-	local list= x= xx= y= args= mpargs= cnt=0 a=
+	local list= x= xx= y= args= mpargs= a=
 	for x in $kv_variant_list ; do
 		eval list=\$modules_$(shell_var "$x")
 		[ -n "$list" ] && break
 	done
 	[ -z "$list" ] && list=$modules
 
+	[ -n "$list" ] && ebegin "Loading kernel modules"
 	for x in $list; do
 		a=${x#*:}
 		if [ "$a" = "$x" ]; then
 			unset mpargs
-			ebegin "Loading module $x"
 		else
 			x=${x%%:*}
 			mpargs="-o $a"
-			ebegin "Loading module $x as $a"
 		fi
 		aa=$(shell_var "$a")
 		xx=$(shell_var "$x")
@@ -56,8 +74,16 @@ start()
 		done
 		[ -z "$args" ] && eval args=\$module_${aa}_args
 		[ -z "$args" ] && eval args=\$module_${xx}_args
-		eval modprobe -q "$mpargs" "$x" "$args"
-		eend $? "Failed to load $x" && : $(( cnt += 1 ))
+		eval modprobe --use-blacklist --verbose "$mpargs" "$x" "$args"
 	done
-	einfo "Autoloaded $cnt module(s)"
+	[ -n "$list" ] && eend
+}
+
+start()
+{
+	case "$RC_UNAME" in
+		FreeBSD|Linux) ${RC_UNAME}_modules ;;
+		*) ;;
+	esac
+	return 0
 }

init.d/mount-ro.in

@@ -1,13 +1,20 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Re-mount filesytems read-only for a clean reboot."
 
 depend()
 {
-	need killprocs savecache
-	keyword -openvz -prefix -vserver -lxc
+	after killprocs savecache
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()
@@ -27,6 +34,9 @@ start()
 
 	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|/run|${rc_svcdir}" x= fs=
 	m="$m|/bin|/sbin|/lib(32|64)?|/libexec"
+	if [ -e "$rc_svcdir"/usr_premounted ]; then
+		m="$m|/usr"
+	fi
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
 	local IFS="$IFS:"
 	for x in $no_umounts $RC_NO_UMOUNTS; do

init.d/moused.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 mouse=${RC_SVCNAME##*.}
 if [ -n "$mouse" -a "$mouse" != "moused" ]; then

init.d/mtab.in

@@ -1,39 +1,47 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Update /etc/mtab to match what the kernel knows about"
 
 depend()
 {
+	after clock
 	need root
-	keyword -prefix
+	keyword -prefix -systemd-nspawn
 }
 
 start()
 {
-	if [ -L /etc/mtab ]; then
-		return 0
-	fi
-
+	local rc=0
 	ebegin "Updating /etc/mtab"
-	vewarn "The support for updating /etc/mtab as a file is"
-	vewarn "deprecated and will be removed in the future."
-	vewarn "Please run the following command as root on your system."
-	vewarn
-	vewarn "ln -snf /proc/self/mounts /etc/mtab"
-	if ! echo 2>/dev/null >/etc/mtab; then
-		ewend 1 "/etc/mtab is not updateable"
-		return 0
+	if ! checkpath -W /etc; then
+		rc=1
+	elif ! yesno ${mtab_is_file:-no}; then
+		[ ! -L /etc/mtab ] && [ -f /etc/mtab ] &&
+			ewarn "Removing /etc/mtab file"
+		einfo "Creating mtab symbolic link"
+		ln -snf /proc/self/mounts /etc/mtab
+	else
+		[ -L /etc/mtab ] && ewarn "Removing /etc/mtab symbolic link"
+		rm -f /etc/mtab
+		einfo "Creating mtab file"
+		# With / as tmpfs we cannot umount -at tmpfs in localmount as that
+		# makes / readonly and dismounts all tmpfs even if in use which is
+		# not good. Luckily, umount uses /etc/mtab instead of /proc/mounts
+		# which allows this hack to work.
+		grep -v "^[! ]* / tmpfs " /proc/mounts > /etc/mtab
+
+		# Remove stale backups
+		rm -f /etc/mtab~ /etc/mtab~~
 	fi
-
-	# With / as tmpfs we cannot umount -at tmpfs in localmount as that
-	# makes / readonly and dismounts all tmpfs even if in use which is
-	# not good. Luckily, umount uses /etc/mtab instead of /proc/mounts
-	# which allows this hack to work.
-	grep -v "^[! ]* / tmpfs " /proc/mounts > /etc/mtab
-
-	# Remove stale backups
-	rm -f /etc/mtab~ /etc/mtab~~
-	eend 0
+	eend $rc "/etc is not writable; unable to create /etc/mtab"
+	return 0
 }

init.d/net-online.in

@@ -0,0 +1,69 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+description="Delays until the network is online or a specific timeout"
+
+depend()
+{
+	after modules
+	need sysfs
+	provide network-online
+	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -uml -vserver
+}
+
+get_interfaces()
+{
+	local ifname iftype
+	for ifname in /sys/class/net/*; do
+		read iftype < ${ifname}/type
+		[ "$iftype" = "1" ] && printf "%s " ${ifname##*/}
+	done
+}
+
+start ()
+{
+	local carriers configured dev gateway ifcount infinite
+	local rc state x
+
+	ebegin "Checking to see if the network is online"
+	rc=0
+	interfaces=${interfaces:-$(get_interfaces)}
+	timeout=${timeout:-120}
+ [ $timeout -eq 0 ] && infinite=true || infinite=false
+ while $infinite || [ $timeout -gt 0 ]; do
+	carriers=0
+	configured=0
+	ifcount=0
+ 	for dev in ${interfaces}; do
+		: $((ifcount += 1))
+		read x < /sys/class/net/$dev/carrier
+		[ $x -eq 1 ] && : $((carriers += 1))
+		read x < /sys/class/net/$dev/operstate
+		[ "$x" = up ] && : $((configured += 1))
+	done
+	[ $configured -eq $ifcount ] && [ $carriers -ge 1 ] && break
+	sleep 1
+	: $((timeout -= 1))
+ done
+ ! $infinite && [ $timeout -eq 0 ] && rc=1
+ include_ping_test=${include_ping_test:-${ping_default_gateway}}
+ if [ -n "${ping_default_gateway}" ]; then
+ ewarn "ping_default_gateway is deprecated, please use include_ping_test"
+ fi
+ if [ $rc -eq 0 ] && yesno ${include_ping_test:-no}; then
+ 	ping_test_host="${ping_test_host:-google.com}"
+ 	if [ -n "$ping_test_host" ]; then
+		ping -c 1 $ping_test_host > /dev/null 2>&1
+		rc=$?
+	fi
+ fi
+ eend $rc "The network is offline"
+}

init.d/netmount.in

@@ -1,15 +1,32 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Mounts network shares according to /etc/fstab."
 
 depend()
 {
-	config /etc/fstab
-	use afc-client amd nfsclient autofs openvpn
+	local opts mywant=""
+	for opts in $(fstabinfo -o -t nfs,nfs4); do
+		case $opts in
+			noauto) ;;
+			*) mywant="$mywant nfsclient"; break ;;
+		esac
+	done
+	after root
+ 	config /etc/fstab
+	want $mywant
+	use afc-client amd openvpn
 	use dns
-	keyword -jail -prefix -vserver -lxc
+	use root
+	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
 }
 
 start()
@@ -22,12 +39,24 @@ start()
 	ebegin "Mounting network filesystems"
 	mount -at $fs
 	rc=$?
-	if [ "$RC_UNAME" = Linux ]; then
+	if [ "$RC_UNAME" = Linux ] && [ $rc = 0 ]; then
 		mount -a -O _netdev
 		rc=$?
 	fi
 	ewend $rc "Could not mount all network filesystems"
-	return 0
+	if [ -z "$critical_mounts" ]; then
+		rc=0
+	else
+		for x in ${critical_mounts}; do
+		fstabinfo -q $x || continue
+		if ! mountinfo -q $x; then
+			critical=x
+			eerror "Failed to mount $x"
+		fi
+		done
+		[ -z "$critical" ] && rc=0
+	fi
+	return $rc
 }
 
 stop()
@@ -54,7 +83,7 @@ stop()
 	retval=$?
 
 	eoutdent
-	if [ "$RC_UNAME" = Linux ]; then
+	if [ "$RC_UNAME" = Linux ] && [ $retval = 0 ]; then
 		umount -a -O _netdev
 		retval=$?
 	fi

init.d/network.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2009-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 # This script was inspired by the equivalent rc.d network from NetBSD.
 
@@ -11,7 +18,7 @@ __nl="
 depend()
 {
 	need localmount
-	after bootmisc
+	after bootmisc clock
 	if [ -n "$(interfaces)" ]; then
 		provide net
 	fi

init.d/newsyslog.in

@@ -1,11 +1,19 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 required_files="/etc/newsyslog.conf"
 
 depend()
 {
+	after clock
 	need localmount
 	keyword -prefix
 }

init.d/nscd.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 command=/usr/sbin/nscd
 command_args=$nscd_args

init.d/numlock.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Turns numlock on for the consoles."
 
@@ -9,7 +16,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 depend()
 {
 	need localmount
-	keyword -openvz -prefix -vserver -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 _setleds()

init.d/osclock.in

@@ -0,0 +1,19 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2014-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+# Can be used on OSs that take care of the clock.
+
+description="Provides clock"
+
+depend()
+{
+	provide clock
+}

init.d/pf.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 name="Packet Filter"
 : ${pf_conf:=${pf_rules:-/etc/pf.conf}}

init.d/powerd.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 command=/usr/sbin/powerd
 command_args=$powerd_args

init.d/procfs.in

@@ -1,73 +1,41 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 description="Mounts misc filesystems in /proc."
 
 depend()
 {
-	use modules devfs
+	after clock
+	use devfs
+	want modules
 	need localmount
-	keyword -openvz -prefix -vserver -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()
 {
-	# Make sure we insert usbcore if it's a module
-	if [ -f /proc/modules -a ! -d /sys/module/usbcore -a ! -d /proc/bus/usb ]; then
-		modprobe -q usbcore
-	fi
-
-	[ -e /proc/filesystems ] || return 0
-
 	# Setup Kernel Support for miscellaneous Binary Formats
-	if [ -d /proc/sys/fs/binfmt_misc -a ! -e /proc/sys/fs/binfmt_misc/register ]; then
+	if [ -d /proc/sys/fs/binfmt_misc ] &&
+		[ ! -e /proc/sys/fs/binfmt_misc/register ]; then
+		if ! grep -qs binfmt_misc /proc/filesystems &&
+			modprobe -q binfmt-misc; then
+			ewarn "The binfmt-misc module needs to be configured in" \
+				"@SYSCONFDIR@/conf.d/modules or built in."
+		fi
 		if grep -qs binfmt_misc /proc/filesystems; then
 			ebegin "Mounting misc binary format filesystem"
 			mount -t binfmt_misc -o nodev,noexec,nosuid \
 				binfmt_misc /proc/sys/fs/binfmt_misc
-			if eend $? ; then
-				local fmts
-				ebegin "Loading custom binary format handlers"
-				fmts=$(grep -hsv -e '^[#;]' -e '^[[:space:]]*$' \
-					/run/binfmt.d/*.conf \
-					/etc/binfmt.d/*.conf \
-					""/usr/lib/binfmt.d/*.conf)
-				if [ -n "${fmts}" ]; then
-					echo "${fmts}" > /proc/sys/fs/binfmt_misc/register
-				fi
 				eend $?
-			fi
 		fi
 	fi
-
-	[ "$RC_SYS" = "OPENVZ" ] && return 0
-
-	# Check what USB fs the kernel support.  Currently
-	# 2.5+ kernels, and later 2.4 kernels have 'usbfs',
-	# while older kernels have 'usbdevfs'.
-	if [ -d /proc/bus/usb -a ! -e /proc/bus/usb/devices ]; then
-		local usbfs=$(grep -Fow usbfs /proc/filesystems ||
-			grep -Fow usbdevfs /proc/filesystems)
-		if [ -n "$usbfs" ]; then
-			ebegin "Mounting USB device filesystem [$usbfs]"
-			local usbgid="$(getent group usb | \
-				sed -e 's/.*:.*:\(.*\):.*/\1/')"
-			mount -t $usbfs \
-				-o ${usbgid:+devmode=0664,devgid=$usbgid,}noexec,nosuid \
-				usbfs /proc/bus/usb
-			eend $?
-		fi
-	fi
-
-	# Setup Kernel Support for SELinux
-	if [ -d /sys/fs/selinux ] && ! mountinfo -q /sys/fs/selinux; then
-		if grep -qs selinuxfs /proc/filesystems; then
-			ebegin "Mounting SELinux filesystem"
-			mount -t selinuxfs selinuxfs /sys/fs/selinux
-			eend $?
-		fi
-	fi
-
 	return 0
 }

init.d/rarpd.in

@@ -1,6 +1,13 @@
 #!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# Copyright (c) 2007-2015 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
 
 command=/usr/sbin/rarpd
 command_args="-f $rarpd_args"