Remove leading and trailing space on the ctrl_interface line.

are not being used.

.gitignore

@@ -1,3 +0,0 @@
-openrc-0.1.tar.bz2
-.gdb_history
-.gdbinit

Makefile

@@ -3,7 +3,7 @@
 # All rights reserved. Released under the 2-clause BSD license.
 
 NAME=		openrc
-VERSION=	0.2
+VERSION=	0.4.1
 PKG=		${NAME}-${VERSION}
 
 SUBDIR=		conf.d doc etc init.d man net sh src
@@ -17,7 +17,6 @@ include ${MK}/sys.mk
 include ${MK}/os.mk
 include ${MK}/subdir.mk
 include ${MK}/dist.mk
-include ${MK}/gitignore.mk
 
 _installafter:
 	${INSTALL} -d ${DESTDIR}/${PREFIX}/${RC_LIB}/init.d

README

@@ -19,6 +19,8 @@ PREFIX=/usr/local
 
 We don't support building a static OpenRC with PAM.
 You may need to use PROGLDFLAGS=-Wl,-Bstatic on glibc instead of just -static.
+If you debug memory under valgrind, add -DDEBUG_MEMORY to your CPPFLAGS
+so that all malloc memory should be freed at exit.
 
 You can also brand OpenRC if you so wish like so
 BRANDING=\"Gentoo/$(uname -s)\"

conf.d/Makefile

@@ -1,5 +1,5 @@
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname local net urandom
+CONF=	bootmisc fsck hostname local localmount net urandom
 
 MK=	../mk
 include ${MK}/os.mk

conf.d/Makefile.FreeBSD

@@ -1 +1 @@
-CONF+=	moused powerd rarpd savecore syscons
+CONF+=	ipfw moused powerd rarpd savecore syscons

conf.d/Makefile.Linux

@@ -1 +1 @@
-CONF+=	consolefont hwclock keymaps modules
+CONF+=	consolefont dmesg hwclock keymaps modules

conf.d/Makefile.NetBSD

@@ -1 +1 @@
-CONF+=	moused powerd rarpd savecore
+CONF+=	moused rarpd savecore

conf.d/dmesg

@@ -0,0 +1,3 @@
+# Sets the level at which logging of messages is done to the
+# console.  See dmesg(8) for more info.
+dmesg_level="1"

conf.d/ipfw

@@ -0,0 +1,14 @@
+# ipfw provides a stateful firewall.
+# This means we allow everything out, and if we have a connection we allow it
+# back in. This is very flexable and quite secure.
+
+# For ease of use, we allow auth and ssh ports through as well.
+# To override the list of allowed ports
+#ipfw_ports_in="auth ssh"
+
+# You may want to enable logging of denied connections
+#ipfw_log_deny="YES"
+
+# This ports not logged
+#ipfw_ports_nolog="135-139,445 1026,1027 1433,1434"
+

conf.d/localmount

@@ -0,0 +1,3 @@
+# Stop the unmounting of certain points.
+# This could be useful for some NFS related work.
+#no_umounts="/dir1:/var/dir2"

conf.d/modules

@@ -5,6 +5,10 @@
 #modules_2_6="tun"
 #modules="ohci1394"
 
+# You can give modules a different name when they load - the new name
+# will also be used to pick arguments below.
+#modules="dummy:dummy1"
+
 # Give the modules some arguments if needed, per version if necessary.
 #module_ieee1394_args="debug"
 #module_ieee1394_args_2_6_23_gentoo_r5="ieee1394 ohci1394"

doc/.gitignore

@@ -1 +0,0 @@
-net.example

doc/net.example.BSD.in

@@ -87,6 +87,10 @@
 # is how long we wait for carrier. The current default is 3 seconds
 #carrier_timeout_eth0=-1
 
+# You may wish to disable the interface being brought down when stopping.
+# This is only of use for WakeOnLan.
+#ifdown_eth0="NO"
+
 ##############################################################################
 # OPTIONAL MODULES
 

doc/net.example.Linux.in

@@ -120,6 +120,10 @@
 # tables you may have to set a global metric as the due to a simple read of
 # the routing table taking over a minute at a time.
 
+# You may wish to disable the interface being brought down when stopping.
+# This is only of use for WakeOnLan.
+#ifdown_eth0="NO"
+
 ##############################################################################
 # OPTIONAL MODULES
 
@@ -565,12 +569,18 @@
 
 #-----------------------------------------------------------------------------
 # Bonding
-# For link bonding/trunking emerge net-misc/ifenslave
+# For link bonding/trunking on 2.4 kernels, or kernels without sysfs
+# emerge net-misc/ifenslave
 
 # To bond interfaces together
 #slaves_bond0="eth0 eth1 eth2"
 #config_bond0="null" # You may not want to assign an IP the the bond
 
+# You can also configure the bond here, which must be done via sysfs on 2.6
+# kernels or newer. See the kernel bonding documention for a description of
+# these options.
+#arp_ip_target_bond0="+26.0.0.0"
+
 # If any of the slaves require extra configuration - for example wireless or
 # ppp devices - we need to depend function on the bonded interfaces
 #rc_need_bond0="net.eth0 net.eth1"
@@ -1006,7 +1016,7 @@
 
 #postdown() {
 #	# Enable Wake-On-LAN for every interface except for lo
-#	# Probably a good idea to set RC_DOWN_INTERFACE="no" in /etc/conf.d/rc
+#	# Probably a good idea to set ifdown="no" in /etc/conf.d/net
 #	# as well ;)
 #	[ "${IFACE}" != "lo" ] && ethtool -s "${IFACE}" wol g
 

etc/.gitignore

@@ -1,3 +0,0 @@
-rc.conf
-rc
-rc.shutdown

etc/Makefile

@@ -1,6 +1,8 @@
 DIR=	${SYSCONFDIR}
 CONF=	rc.conf
 
+CLEANFILES+=	rc.conf
+
 MK=	../mk
 include ${MK}/os.mk
 include Makefile.${OS}

etc/Makefile.FreeBSD

@@ -1,4 +1,4 @@
 SED_EXTRA=	-e 's:@TERM@:cons25:g'
 SRCS+=		rc.conf.in rc.in rc.shutdown.in
 CONF+=		devd.conf
-BIN+=		rc.devd
+BIN+=		rc rc.shutdown rc.devd

etc/Makefile.NetBSD

@@ -1,2 +1,3 @@
 SED_EXTRA=	-e 's:@TERM@:wsvt25:g'
 SRCS+=		rc.conf.in rc.in rc.shutdown.in
+BIN+=		rc rc.shutdown

etc/rc.conf.Linux

@@ -6,20 +6,3 @@
 # consolefont, numlock, etc ...)
 rc_tty_number=12
 
-# Use this variable to control the /dev management behavior.
-#  devfs  - use devfs (requires sys-fs/devfsd)
-#  mdev   - use mdev (requires sys-apps/busybox)
-#  udev   - use udev (requires sys-fs/udev)
-#  static - let the user manage /dev (YOU need to create ALL device nodes)
-# Leave it blank to let rc work it out (udev, mdev, devfs, static)
-#rc_devices=""
-
-# UDEV OPTION:
-# Set to "yes" if you want to save /dev to a tarball on shutdown
-# and restore it on startup.  This is useful if you have a lot of
-# custom device nodes that udev does not handle/know about.
-rc_device_tarball="NO"
-
-# Sets the level at which logging of messages is done to the
-# console.  See dmesg(8) for more info.
-dmesg_level="1"

etc/rc.conf.in

@@ -4,6 +4,9 @@
 # in parallel for a slight speed improvement. When running in parallel we
 # prefix the service output with it's name as the output will get
 # jumbled up.
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
 rc_parallel="NO"
 
 # Set rc_interactive to "YES" and you'll be able to press the I key during
@@ -19,36 +22,36 @@ rc_interactive="YES"
 # come up.
 rc_depend_strict="YES"
 
-# Do we allow services to be hotplugged? If not, set to rc_hotplug="NO"
-# NOTE: This does not affect anything hotplug/udev/devd related, just the
-# starting/stopping of the init.d service triggered by it.
-rc_hotplug="YES"
-
-# Dynamic /dev managers can trigger coldplug events which cause services to
-# start before we are ready for them. If this happens, we can defer these
-# services to start in the boot runlevel. Set rc_coldplug="NO" if you don't
-# want this.
-# NOTE: This also affects module coldplugging in udev-096 and higher
-# If you want module coldplugging but not coldplugging of services then you
-# can set rc_coldplug="YES" and rc_plug_services="!*"
-rc_coldplug="YES"
-
-# Some people want a finer grain over hotplug/coldplug. rc_plug_services is a
-# list of services that are matched in order, either allowing or not. By
-# default we allow services through as rc_coldplug/rc_hotplug has to be YES
-# anyway.
-# Example - rc_plug_services="net.wlan !net.*"
+# rc_hotplug is a list of services that we allow to be hotplugged.
+# By default we do not allow hotplugging.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# This service is intrinsically included in the boot runlevel.
+# To disable services, prefix with a !
+# Example - rc_hotplug="net.wlan !net.*"
 # This allows net.wlan and any service not matching net.* to be plugged.
-rc_plug_services=""
+# Example - rc_hotplug="*"
+# This allows all services to be hotplugged
+#rc_hotplug="*"
 
 # rc_logger launches a logging daemon to log the entire rc process to
 # /var/log/rc.log
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
 rc_logger="NO"
 
 # By default we filter the environment for our running scripts. To allow other
 # variables through, add them here. Use a * to allow all variables through.
 # rc_env_allow="VAR1 VAR2"
 
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+# rc_start_wait=100
+
 ##############################################################################
 # MISC CONFIGURATION VARIABLES
 # There variables are shared between many init scripts

etc/rc.in

@@ -10,12 +10,9 @@
 trap : SIGINT
 trap "echo 'Boot interrupted'; exit 1" SIGQUIT
 
-# BSD's init works somewhat differently to sysvinit.
-# This block should 'translate' from the way init calls it to the way it would
-# be called by sysvinit on linux.
-RUNLEVEL="1" /sbin/rc sysinit || exit 1
-RUNLEVEL="1" /sbin/rc boot || exit 1
-PREVLEVEL="1" /sbin/rc default
+/sbin/rc sysinit || exit 1
+/sbin/rc boot || exit 1
+/sbin/rc default
 
 # We don't actually care if rc default worked or not, we should exit 0
 # to allow logins

etc/rc.shutdown.in

@@ -14,13 +14,4 @@ export LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}"
 [ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@"
 
 action=${1:-shutdown}
-
-# BSD's init works somewhat differently to sysvinit.
-# This block should 'translate' from the way init calls it to the way it would
-# be called by sysvinit on linux.
-case "${action}" in
-	reboot) 	export RUNLEVEL=6;;
-	single)		export RUNLEVEL=S;;
-	*)		export RUNLEVEL=0;;
-esac
 exec /sbin/rc "${action}"

init.d.misc/.gitignore

@@ -1,9 +0,0 @@
-avahi-dnsconfd
-avahid
-dbus
-hald
-named
-ntpd
-openvpn
-polkitd
-sshd

init.d.misc/Makefile

@@ -3,5 +3,8 @@ SRCS=	avahi-dnsconfd.in avahid.in dbus.in hald.in named.in ntpd.in \
 	openvpn.in polkitd.in sshd.in
 
 MK=	../mk
+
+SED_EXTRA+= -e 's:@VARBASE@:/var:g'
+
 include ${MK}/scripts.mk
 include Makefile.${OS}

init.d.misc/dbus.in

@@ -3,7 +3,7 @@
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/bin/dbus-daemon
-pidfile=@VARBASE@/run/dbus/dbus.pid
+pidfile=@VARBASE@/run/dbus/pid
 command_args="${dbusd_args---system}"
 name="Message Bus Daemon"
 

init.d.misc/named.in

@@ -4,12 +4,22 @@
 
 command=/usr/sbin/named
 command_args=${named_args}
-pidfile=@VARBASE@/run/named/pid
+pidfile=@VARBASE@/run/named.pid
 name="Domain Name server"
 extra_started_commands="reload"
 
 namedb=/etc/namedb
-named_uid=${named_uid:-bind}
+uid=named
+case "${RC_UNAME}" in
+	FreeBSD)
+		uid=bind
+		pidfile=@VARBASE@/run/named/pid
+		;;
+	Linux)
+		uid=bind
+		;;
+esac
+named_uid=${named_uid:-${uid}}
 
 depend()
 {

init.d/.gitignore

@@ -1,28 +0,0 @@
-bootmisc
-fsck
-halt.sh
-hostname
-local
-localmount
-netmount
-root
-swap
-sysctl
-urandom
-hostid
-moused
-newsyslog
-pf
-rarpd
-rc-enabled
-rpcbind
-savecore
-syslogd
-adjkerntz
-devd
-dumpon
-ipfw
-mixer
-nscd
-powerd
-syscons

init.d/Makefile

@@ -1,9 +1,16 @@
 DIR=	${INITDIR}
-SRCS=	bootmisc.in fsck.in halt.sh.in hostname.in local.in localmount.in \
-	netmount.in root.in swap.in sysctl.in urandom.in
+SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in \
+	netmount.in root.in savecache.in swap.in sysctl.in urandom.in
 BIN=	${OBJS}
 
+INSTALLAFTER=	_installafter
+CLEANFILES+=	net.lo
+TARGETS+=	net.lo
+
 MK=	../mk
 include ${MK}/os.mk
 include Makefile.${OS}
 include ${MK}/scripts.mk
+
+_installafter: realinstall
+	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO}

init.d/Makefile.FreeBSD

@@ -1,3 +1,5 @@
+NET_LO=	net.lo0
+
 # Generic BSD scripts
 SRCS+=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 	rpcbind.in savecore.in syslogd.in

init.d/Makefile.Linux

@@ -1,5 +1,8 @@
-SRCS+=	hwclock.in consolefont.in keymaps.in modules.in mtab.in numlock.in \
-	procfs.in
+NET_LO=	net.lo
+
+SRCS+=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in killprocs.in \
+	modules.in mount-ro.in mtab.in numlock.in procfs.in sysfs.in \
+	termencoding.in
 
 .SUFFIXES:	.Linux.in
 .Linux.in:

init.d/Makefile.NetBSD

@@ -1,9 +1,11 @@
+NET_LO=	net.lo0
+
 # Generic BSD scripts
 SRCS+=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 	rpcbind.in savecore.in syslogd.in
 
 # These are NetBSD specific
-SRCS+=	swap-blk.in ttys.in wscons.in
+SRCS+=	devdb.in swap-blk.in ttys.in wscons.in
 
 .SUFFIXES:	.BSD.in
 .BSD.in:

init.d/bootmisc.in

@@ -11,21 +11,25 @@ depend()
 	keyword noprefix
 }
 
+dir_writeable()
+{
+	mkdir "$1"/.test.$$ 2>/dev/null && rmdir "$1"/.test.$$
+}
+
 cleanup_tmp_dir()
 {
-	local dir=$1
+	local dir="$1"
 
-	mkdir -p "${dir}"
+	if ! [ -d "${dir}" ]; then
+		mkdir -p "${dir}" || return $?
+	fi
+	dir_writeable "${dir}" || return 1
+	chmod +t "${dir}"
 	cd "${dir}"
 	if yesno ${wipe_tmp:-${WIPE_TMP:-yes}}; then
 		ebegin "Wiping ${dir} directory"
-		local startopts="-x . -depth" delete="-exec rm -rf -- {} ;"
-
-		if [ "${RC_UNAME}" = "Linux" ]; then
-			startopts=". -xdev -depth"
-			# busybox find / rm cannot handle --
-			delete="-delete"
-		fi
+		local startopts="-x . -depth"
+		[ "${RC_UNAME}" = "Linux" ] && startopts=". -xdev -depth"
 
 		# Faster than find
 		rm -rf -- [b-ikm-pr-zA-Z0-9\.]*
@@ -45,8 +49,7 @@ cleanup_tmp_dir()
 			! -path "./journal/*" \
 			! -path "./.private" \
 			! -path "./.private/*" \
-			${delete} \
-			-type d -prune
+			-exec rm -rf {} \;
 		eend 0
 	else
 		ebegin "Cleaning ${dir} directory"
@@ -60,12 +63,7 @@ cleanup_tmp_dir()
 
 start()
 {
-	if ! mkdir /.test.$$ 2>/dev/null; then
-		ewarn "Skipping /var and /tmp initialization (ro root?)"
-		return 0
-	fi
-	rmdir /.test.$$
-
+	local logw=false
 	# Ensure that our basic dirs exist
 	for x in /var/log /var/run /tmp; do
 		if ! [ -d "${x}" ]; then
@@ -76,51 +74,71 @@ start()
 		fi 
 	done
 
-	ebegin "Creating user login records"
-	cp /dev/null /var/run/utmp
-	[ -e /var/log/wtmp ] || cp /dev/null /var/log/wtmp
-	chmod 0644 /var/run/utmp /var/log/wtmp
-	eend 0
+	if dir_writeable /var/run; then
+		ebegin "Creating user login records"
+		cp /dev/null /var/run/utmp
+		chgrp utmp /var/run/utmp
+		chmod 0664 /var/run/utmp
+		if dir_writeable /var/log; then
+			logw=true
+			[ -e /var/log/wtmp ] || cp /dev/null /var/log/wtmp
+			chgrp utmp /var/log/wtmp
+			chmod 0664 /var/log/wtmp
+		fi
+		eend 0
 
-	ebegin "Cleaning /var/run"
-	for x in $(find /var/run ! -type d ! -name utmp ! -name random-seed \
-		   ! -name ld-elf.so.hints ! -name ld.so.hints);
-	do	
-		[ ! -f "${x}" ] && continue
-		# Do not remove pidfiles of already running daemons
-		case "${x}" in
-			*.pid)
-				start-stop-daemon --test --quiet --stop \
-				--pidfile "${x}"
-				[ $? -eq 0 ] && continue
+		ebegin "Cleaning /var/run"
+		for x in $(find /var/run ! -type d ! -name utmp \
+			! -name random-seed ! -name dev.db \
+			! -name ld-elf.so.hints ! -name ld.so.hints);
+		do
+			# Clean stale sockets
+			if [ -S "${x}" ]; then
+				if type fuser >/dev/null 2>&1; then
+					fuser "${x}" 2>/dev/null || rm "${x}"
+				else
+					rm "${x}"
+				fi
+			fi
+			[ ! -f "${x}" ] && continue
+			# Do not remove pidfiles of already running daemons
+			case "${x}" in
+				*.pid)
+					start-stop-daemon --test --quiet \
+					--stop --pidfile "${x}" && continue
 				;;
-		esac
-		rm -f -- "${x}"
-	done
-	eend 0
+			esac
+			rm -f -- "${x}"
+		done
+		eend 0
+	fi
 
 	# Clean up /tmp directories
 	local tmp=
 	for tmp in ${wipe_tmp_dirs-/tmp}; do
 		cleanup_tmp_dir "${tmp}"
 	done
-	chmod +t /tmp /var/tmp
 
-	# Make sure our X11 stuff have the correct permissions
-	# Omit the chown as bootmisc is run before network is up
-	# and users may be using lame LDAP auth #139411
-	rm -rf /tmp/.ICE-unix /tmp/.X11-unix 
-	mkdir -p /tmp/.ICE-unix /tmp/.X11-unix
-	chmod 1777 /tmp/.ICE-unix /tmp/.X11-unix
-	[ -x /sbin/restorecon ] && restorecon /tmp/.ICE-unix /tmp/.X11-unix
+	if dir_writeable /tmp; then
+		# Make sure our X11 stuff have the correct permissions
+		# Omit the chown as bootmisc is run before network is up
+		# and users may be using lame LDAP auth #139411
+		rm -rf /tmp/.ICE-unix /tmp/.X11-unix 
+		mkdir -p /tmp/.ICE-unix /tmp/.X11-unix
+		chmod 1777 /tmp/.ICE-unix /tmp/.X11-unix
+		[ -x /sbin/restorecon ] && restorecon /tmp/.ICE-unix /tmp/.X11-unix
+	fi
 
-	# Create an 'after-boot' dmesg log
-	if [ "${RC_SYS}" != "VSERVER" -a "${RC_SYS}" != "OPENVZ" ]; then
-		dmesg > /var/log/dmesg
-		chmod 640 /var/log/dmesg
+	if ${logw} || dir_writeable /var/log; then
+		# Create an 'after-boot' dmesg log
+		if [ "${RC_SYS}" != "VSERVER" -a "${RC_SYS}" != "OPENVZ" ]; then
+			dmesg > /var/log/dmesg
+			chmod 640 /var/log/dmesg
+		fi
 	fi
 
 	rm -f /etc/nologin
+	return 0
 }
 
 stop()

init.d/consolefont.in

@@ -6,8 +6,7 @@ description="Sets a font for the consoles."
 
 depend()
 {
-	need localmount
-	need keymaps    # sets up terminal encoding scheme
+	need localmount termencoding
 	after hotplug
 	keyword noopenvz noprefix nouml novserver noxenu
 }
@@ -34,7 +33,7 @@ start()
 		return 0
 	fi
 
-	local x= param= sf_param= retval=0 ttydev=
+	local x= param= sf_param= retval=0 ttydev=/dev/tty
 
 	# Get additional parameters
 	if [ -n "${consoletranslation}" ]; then
@@ -45,11 +44,8 @@ start()
 	fi
 
 	# Set the console font
-	ebegin "Setting user font"
-	[ -d /dev/vc ] \
-		&& ttydev=/dev/vc/ \
-		|| ttydev=/dev/tty
-
+	ebegin "Setting console font [${consolefont}]"
+	[ -d /dev/vc ] && ttydev=/dev/vc/
 	x=1
 	while [ ${x} -le ${ttyn} ]; do
 		setfont ${consolefont} ${param} -C ${ttydev}${x} >/dev/null 
@@ -61,17 +57,17 @@ start()
 	# Store the last font so we can use it ASAP on boot
 	if [ ${retval} -eq 0 -a -w "${RC_LIBDIR}" ]; then
 		mkdir -p "${RC_LIBDIR}"/console
-
 		for font in /usr/share/consolefonts/"${consolefont}".*; do
 			:
 		done
 		cp "${font}" "${RC_LIBDIR}"/console
 		echo "${font##*/}" > "${RC_LIBDIR}"/console/font
 		if yesno ${unicode:-${UNICODE}}; then
-			cp /dev/null "${RC_LIBDIR}"/console/unicode
+			echo "" > "${RC_LIBDIR}"/console/unicode
 		else
 			rm -f "${RC_LIBDIR}"/console/unicode
 		fi
+
 	fi
 
 	return ${retval}

init.d/devdb.in

@@ -0,0 +1,21 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Creates the dev database"
+
+depend()
+{
+	need localmount
+}
+
+start()
+{
+	ebegin "Bulding the dev database"
+	if [ /var/run/dev.db -nt /dev ]; then
+		:
+	else
+		dev_mkdb
+	fi
+	eend $?
+}

init.d/devfs.in

@@ -0,0 +1,36 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Mount system critical filesystems in /dev."
+
+depend() {
+	use dev
+	keyword noprefix
+}
+
+start() {
+	# Mount required stuff as user may not have then in /etc/fstab
+	for x in \
+		"devpts /dev/pts 0755 ,gid=5,mode=0620 devpts" \
+		"tmpfs /dev/shm 1777 ,nodev shm" \
+	; do
+		set -- ${x}
+		grep -Eq "[[:space:]]+$1$" /proc/filesystems || continue
+		mountinfo -q "$2" && continue
+
+		if [ ! -d "$2" ]; then
+			mkdir -m "$3" -p "$2" >/dev/null 2>&1 || \
+				ewarn "Could not create $2!"
+		fi
+
+		if [ -d "$2" ]; then
+			ebegin "Mounting $2"
+			if ! fstabinfo --mount "$2"; then
+				mount -n -t "$1" -o noexec,nosuid"$4" "$5" "$2"
+			fi
+			eend $?
+		fi
+	done
+	return 0
+}

init.d/dmesg.in

@@ -0,0 +1,18 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Set the dmesg level for a cleaner boot"
+
+depend()
+{
+	before dev modules
+	keyword novserver
+}
+
+start()
+{
+	if [ -n "${dmesg_level}" ]; then
+		dmesg -n"${dmesg_level}"
+	fi
+}

init.d/fsck.in

@@ -3,12 +3,12 @@
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Check and repair filesystems according to /etc/fstab"
-_ISF="
+_IFS="
 "
 
 depend()
 {
-	after clock modules
+	use dev clock modules
 	keyword nojail noopenvz noprefix notimeout novserver
 }
 
@@ -25,22 +25,39 @@ _reboot() {
 	fi
 }
 
+_forcefsck()
+{
+	[ -e /forcefsck ] || get_bootparam forcefsck
+}
+
 start()
 {
-	local reboot_opts= fsck_opts= p=
+	local fsck_opts= p= check_extra=
 
-	ebegin "Checking local filesystems"
+	if [ -e /fastboot ]; then
+		ewarn "Skipping fsck due to /fastboot"
+		return 0
+	fi
+	if _forcefsck; then
+		fsck_opts="${fsck_opts} -f"
+		check_extra="(check forced)"
+	fi
+
+	if [ -n "${fsck_passno}" ]; then
+		check_extra="[passno ${fsck_passno}] ${check_extra}"
+	fi
+	ebegin "Checking local filesystems ${check_extra}"
 	for p in ${fsck_passno}; do
 		local IFS="${_IFS}"
 		case "${p}" in
 			[0-9]*) p="=${p}";;
 		esac
-		set -- "$@" "$(fstabinfo --passno "${p}")"
+		set -- "$@" $(fstabinfo --passno "${p}")
 		unset IFS
 	done
 
 	if [ "${RC_UNAME}" = "Linux" ]; then
-		fsck_opts="-C0 -T"
+		fsck_opts="${fsck_opts} -C0 -T"
 		if [ -z "${fsck_passno}" ]; then
 			fsck_args=${fsck_args--A -p}
 			if echo 2>/dev/null >/.test.$$; then
@@ -48,21 +65,31 @@ start()
 				fsck_opts="${fsck_opts} -R"
 			fi
 		fi
-		reboot_opts="-f"
 	fi
 
-	trap : QUIT
+	trap : INT QUIT
 	fsck ${fsck_args--p} ${fsck_opts} "$@"
 	case $? in
-		0)       eend 0; return 0;;
-		1)       ewend 1 "Filesystems repaired"; return 0;;
-		2|3|4)   ewend 1 "Filesystems repaired, but reboot needed"
-		         _reboot ${reboot_opts} || return 1;;
-		8)       ewend 1 "Operational error"; return 0;;
-		12)      ewend 1 "fsck interupted"; return 1;;
-		*)       eend 2 "Filesystems couldn't be fixed"
-		         _abort || return 1;;
+	0)	eend 0; return 0;;
+	1)	ewend 1 "Filesystems repaired"; return 0;;
+	2|3)	if [ "${RC_UNAME}" = "Linux" ]; then
+		 	ewend 1 "Filesystems repaired, but reboot needed"
+	         	_reboot -f
+		else
+			ewend 1 "Filesystems still have errors; manual fsck required"
+		fi;;
+	4)	if [ "${RC_UNAME}" = "Linux" ]; then
+			ewend 1 "Fileystem errors left uncorrected"
+			return 0
+		else
+		 	ewend 1 "Filesystems repaired, but reboot needed"
+			_reboot
+		fi;;
+	8)	ewend 1 "Operational error"; return 0;;
+	12)	ewend 1 "fsck interupted";;
+	*)	eend 2 "Filesystems couldn't be fixed";;
 	esac
+	_abort || return 1
 }
 
 stop()
@@ -70,6 +97,7 @@ stop()
 	# Fake function so we always shutdown correctly.
 	_abort() { return 0; }
 	_reboot() { return 0; }
+	_forcefsck() { return 1; }
 
 	yesno "${fsck_shutdown}" && start
 	return 0

init.d/halt.sh.in

@@ -1,99 +0,0 @@
-#!@SHELL@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-. @SYSCONFDIR@/init.d/functions.sh
-. "${RC_LIBDIR}"/sh/rc-functions.sh
-[ -r @SYSCONFDIR@/rc.conf ] && . @SYSCONFDIR@/rc.conf
-
-# Support LiveCD foo
-if [ -r /sbin/livecd-functions.sh ]; then
-	. /sbin/livecd-functions.sh
-	livecd_read_commandline
-fi
-
-stop_addon devfs
-stop_addon udev
-
-# Really kill things off before unmounting
-if [ -x /sbin/killall5 ]; then
-	killall5 -15
-	killall5 -9
-fi
-
-# Flush all pending disk writes now
-sync; sync
-
-# If we are in a VPS, we don't need anything below here, because
-#   1) we don't need (and by default can't) umount anything (VServer) or
-#   2) the host utils take care of all umounting stuff (OpenVZ)
-if [ "${RC_SYS}" = "VSERVER" -o "${RC_SYS}" = "OPENVZ" ]; then
-	if [ -e @SYSCONFDIR@/init.d/"$1".sh ]; then
-		. @SYSCONFDIR@/init.d/"$1".sh
-	else
-		exit 0
-	fi
-fi
-
-# If $svcdir is still mounted, preserve it if we can
-mnt=$(mountinfo --node "${RC_SVCDIR}")
-if [ -n "${mnt}" -a -w "${RC_LIBDIR}" ]; then
-	f_opts="-m -c"
-	[ "${RC_UNAME}" = "Linux" ] && f_opts="-c"
-	if type fuser >/dev/null 2>&1; then
-		if [ -n "$(fuser ${f_opts} "${svcdir}" 2>/dev/null)" ]; then
-			fuser -k ${f_opts} "${svcdir}" >/dev/null 2>&1
-			sleep 2
-		fi
-	fi
-	cp -p "${RC_SVCDIR}"/deptree "${RC_SVCDIR}"/depconfig \
-		"${RC_SVCDIR}"/softlevel "${RC_SVCDIR}"/nettree \
-		"${RC_SVCDIR}"/rc.log \
-		"${RC_LIBDIR}" 2>/dev/null
-	umount "${RC_SVCDIR}"
-	rm -rf "${RC_SVCDIR}"/*
-	# Pipe errors to /dev/null as we may have future timestamps
-	cp -p "${RC_LIBDIR}"/deptree "${RC_LIBDIR}"/depconfig \
-		"${RC_LIBDIR}"/softlevel "${RC_LIBDIR}"/nettree \
-		"${RC_LIBDIR}"/rc.log \
-		"${RC_SVCDIR}" 2>/dev/null
-	rm -f "${RC_LIBDIR}"/deptree "${RC_LIBDIR}"/depconfig \
-		"${RC_LIBDIR}"/softlevel "${RC_LIBDIR}"/nettree \
-		"${RC_LIBDIR}"/rc.log
-	# Release the memory disk if we used it
-	case "${mnt}" in
-		"/dev/md"[0-9]*) mdconfig -d -u "${mnt#/dev/md*}";;
-	esac
-fi
-
-unmounted=0
-# Remount the remaining filesystems read-only
-# Most BSD's don't need this as the kernel handles it nicely
-if [ "${RC_UNAME}" = "Linux" ]; then
-	ebegin "Remounting remaining filesystems read-only"
-	# We need the do_unmount function
-	. "${RC_LIBDIR}"/sh/rc-mount.sh
-	eindent
-	fs=
-	for x in ${net_fs_list}; do
-		fs="${fs}${fs:+|}${x}"
-	done
-	[ -n "${fs}" ] && fs="^(${fs})$"
-	do_unmount "mount -n -o remount,ro" \
-		--skip-point-regex "^(/dev|/dev/.*|/proc|/proc/.*|/sys|/sys/.*)$" \
-		${fs:+--skip-fstype-regex} ${fs} --nonetdev
-	eoutdent
-	eend $?
-	unmounted=$?
-fi
-
-if [ ${unmounted} -ne 0 ]; then
-	[ -x /sbin/sulogin ] && sulogin -t 10 /dev/console
-	exit 1
-fi
-
-# Load the final script - not needed on BSD so they should not exist
-[ -e @SYSCONFDIR@/init.d/"$1".sh ] && . @SYSCONFDIR@/init.d/"$1".sh
-
-# Always exit 0 here
-exit 0

init.d/hostid.in

@@ -38,9 +38,11 @@ _set()
 # otherwise we generate a random UUID.
 reset()
 {
-	local uuid=$(kenv smbios.system.uuid 2>/dev/null)
-	local x="[0-9a-f]"
-	local y="${x}${x}${x}${x}"
+	local uuid= x="[0-9a-f]" y="${x}${x}${x}${x}"
+
+	if type kenv >/dev/null 2>&1; then
+		uuid=$(kenv smbios.system.uuid 2>/dev/null)
+	fi
 	case "${uuid}" in
 		${y}${y}-${y}-${y}-${y}-${y}${y}${y});;
 		*) uuid=;;

init.d/hwclock.in

@@ -74,8 +74,14 @@ start()
 	fi
 
 	ebegin "Setting system clock using the hardware clock [${utc}]"
-	if [ -e /proc/modules -a ! -e /dev/rtc ]; then
-		modprobe -q rtc || modprobe -q genrtc
+	if [ -e /proc/modules ]; then
+		local rtc=
+		for rtc in /dev/rtc /dev/rtc[0-9]*; do
+			[ -e "${rtc}" ] && break
+		done
+		if [ ! -e "${rtc}" ]; then
+			modprobe -q rtc-cmos || modprobe -q rtc || modprobe -q genrtc
+		fi
 	fi
 
 	if [ -e /etc/adjtime ] && yesno ${clock_adjfile}; then

init.d/ipfw.in

@@ -20,6 +20,10 @@ ipfw() {
 	/sbin/ipfw -f -q "$@"
 }
 
+have_ip6() {
+	sysctl net.ipv6 2>/dev/null
+}
+
 init() {
 	# Load the kernel module
 	if ! sysctl net.inet.ip.fw.enable=1 >/dev/null 2>&1; then
@@ -36,13 +40,15 @@ init() {
 	ipfw add deny all from any to 127.0.0.0/8
 	ipfw add deny ip from 127.0.0.0/8 to any
 
-	ipfw add pass ip6 from any to any via lo0
-	ipfw add deny ip6 from any to ::1
-	ipfw add deny ip6 from ::1 to any
+	if have_ip6; then 
+		ipfw add pass ip6 from any to any via lo0
+		ipfw add deny ip6 from any to ::1
+		ipfw add deny ip6 from ::1 to any
 	
-	ipfw add pass ip6 from :: to ff02::/16 proto ipv6-icmp
-	ipfw add pass ip6 from fe80::/10 to fe80::/10 proto ipv6-icmp
-	ipfw add pass ip6 from fe80::/10 to ff02::/16 proto ipv6-icmp
+		ipfw add pass ip6 from :: to ff02::/16 proto ipv6-icmp
+		ipfw add pass ip6 from fe80::/10 to fe80::/10 proto ipv6-icmp
+		ipfw add pass ip6 from fe80::/10 to ff02::/16 proto ipv6-icmp
+	fi
 }
 
 start() {
@@ -62,9 +68,11 @@ start() {
 	ipfw add pass udp  from me  to any       keep-state
 	ipfw add pass icmp from me  to any       keep-state
 
-	ipfw add pass tcp  from me6 to any setup keep-state
-	ipfw add pass udp  from me6 to any       keep-state
-	ipfw add pass icmp from me6 to any       keep-state
+	if have_ip6; then
+		ipfw add pass tcp  from me6 to any setup keep-state
+		ipfw add pass udp  from me6 to any       keep-state
+		ipfw add pass icmp from me6 to any       keep-state
+	fi
 
 	# Allow DHCP.
 	ipfw add pass udp  from 0.0.0.0 68 to 255.255.255.255 67 out
@@ -77,11 +85,13 @@ start() {
 	# Allow "mandatory" ICMP in.
 	ipfw add pass icmp from any to any icmptype 3,4,11
 
-	# Allow ICMPv6 destination unreach
-	ipfw add pass ip6 from any to any icmp6types 1 proto ipv6-icmp
-
-	# Allow NS/NA/toobig (don't filter it out)
-	ipfw add pass ip6 from any to any icmp6types 2,135,136 proto ipv6-icmp
+	if have_ip6; then
+		# Allow ICMPv6 destination unreach
+		ipfw add pass ip6 from any to any icmp6types 1 proto ipv6-icmp
+	
+		# Allow NS/NA/toobig (don't filter it out)
+		ipfw add pass ip6 from any to any icmp6types 2,135,136 proto ipv6-icmp
+	fi
 	
 	# Add permits for this workstations published services below
 	# Only IPs and nets in firewall_allowservices is allowed in.

init.d/keymaps.in

@@ -8,13 +8,13 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 unicode=${unicode:-${UNICODE}}
 keymap=${keymap:-${KEYMAP}}
 extended_keymaps=${extended_keymaps:-${EXTENDED_KEYMAPS}}
-windowskeys=${windowskeys:-${SET_WINDOWSKEYS}} 
+windowkeys=${windowkeys:-${SET_WINDOWSKEYS}} 
 fix_euro=${fix_euro:-${FIX_EURO}}
 dumpkeys_charset=${dumpkeys_charset:-${DUMPKEYS_CHARSET}}
 
 depend()
 {
-	need localmount
+	need localmount termencoding
 	keyword noopenvz noprefix nouml novserver noxenu
 }
 
@@ -25,43 +25,41 @@ start()
 		return 1
 	fi
 
-	local ttydev= n=
-	[ -d /dev/vc ] \
-		&& ttydev=/dev/vc/ \
-		|| ttydev=/dev/tty
+	local ttydev=/dev/tty n=
+	[ -d /dev/vc ] && ttydev=/dev/vc/
 
 	# Force linux keycodes for PPC.
 	if [ -f /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes ]; then
 		echo 1 > /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
 	fi
 
-	ebegin "Loading key mappings"
-	local loadkeys_uni= wkeys= 
-	yesno ${unicode} && loadkeys_uni="--unicode"
-	yesno ${windowskeys} && wkeys="windowkeys"
+	ebegin "Loading key mappings [${keymap}]"
+	local loadkeys_uni= wkeys= kmode="-a" msg="ASCII"
+	if yesno ${unicode}; then
+		loadkeys_uni="--unicode"
+		kmode="-u"
+		msg="UTF-8"
+	fi
+	yesno ${windowkeys} && wkeys="windowkeys"
 	loadkeys -q ${loadkeys_uni} ${wkeys} ${keymap} ${extended_keymaps} 
 	eend $? "Error loading key mappings" || return $?
 
 	if yesno ${fix_euro}; then
+		ebegin "Fixing font for euro symbol"
 		# Fix some fonts displaying the Euro, #173528.
 		echo "altgr keycode 18 = U+20AC" | loadkeys -q
+		eend $?
 	fi
 
 	# Set terminal encoding to either ASCII or UNICODE.
 	# See utf-8(7) for more information.
-	local termencoding="%@" termmsg="ASCII" kmode="-a"
+	ebegin "Setting keyboard mode [${msg}]"
 	if yesno ${unicode}; then
 		dumpkeys ${dumpkeys_charset:+-c} \
 			${dumpkeys_charset} | loadkeys --unicode
-		termencoding="%G"
-		termmsg="UTF-8"
-		kmode="-u"
 	fi
-
-	ebegin "Setting terminal encoding to" ${termmsg}
 	n=1
 	while [ ${n} -le "${ttyn}" ]; do
-		printf "\033%s" "${termencoding}" >"${ttydev}${n}"
 		kbd_mode "${kmode}" -C "${ttydev}${n}"
 		n=$((${n} + 1))
 	done

init.d/killprocs.in

@@ -0,0 +1,22 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Kill all processes so we can unmount disks cleanly."
+
+depend()
+{
+	keyword noprefix
+}
+
+start()
+{
+	ebegin "Terminating remaining processes"
+	killall5 -15
+	sleep 1
+	eend 0
+	ebegin "Killing remaining processes"	
+	killall5 -9
+	sleep 1
+	eend 0
+}

init.d/local.in

@@ -39,5 +39,5 @@ stop()
 		. @SYSCONFDIR@/conf.d/local.stop
 	fi
 
-	eend $? $"Failed to stop local"
+	eend $? "Failed to stop local"
 }

init.d/localmount.in

@@ -30,13 +30,13 @@ start()
 stop()
 {
 	# We never unmount / or /dev or $RC_SVCDIR
-	local x= no_umounts="/|/dev|/dev/.*|${RC_SVCDIR}"
+	local x= no_umounts_r="/|/dev|/dev/.*|${RC_SVCDIR}"
 
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
 	OIFS=${IFS} SIFS=${IFS-y}
 	IFS=$IFS:
 	for x in ${no_umounts} ${RC_NO_UMOUNTS}; do
-		no_umounts="${no_umounts}|${x}"
+		no_umounts_r="${no_umounts_r}|${x}"
 	done
 	if [ "${SIFS}" = "y" ]; then
 		IFS=$OIFS
@@ -45,9 +45,9 @@ stop()
 	fi
 
 	if [ "${RC_UNAME}" = "Linux" ]; then
-		no_umounts="${no_umounts}|/proc|/proc/.*|/sys|/sys/.*"
+		no_umounts_r="${no_umounts_r}|/proc|/proc/.*|/sys|/sys/.*"
 	fi
-	no_umounts="^(${no_umounts})$"
+	no_umounts_r="^(${no_umounts_r})$"
 
 	# Flush all pending disk writes now
 	sync; sync
@@ -63,7 +63,7 @@ stop()
 	# Umount loopback devices
 	einfo "Unmounting loopback devices"
 	eindent
-	do_unmount "umount -d" --skip-point-regex "${no_umounts}" \
+	do_unmount "umount -d" --skip-point-regex "${no_umounts_r}" \
 		--node-regex "^/dev/loop"
 	eoutdent
 
@@ -76,7 +76,7 @@ stop()
 		fs="${fs}${fs:+|}${x}"
 	done
 	[ -n "${fs}" ] && fs="^(${fs})$"
-	do_unmount "umount" --skip-point-regex "${no_umounts}" \
+	do_unmount "umount" --skip-point-regex "${no_umounts_r}" \
 		${fs:+--skip-fstype-regex} ${fs} --nonetdev
 	eoutdent
 

init.d/modules.in

@@ -23,7 +23,7 @@ start()
 	x=${KV#*.*.}
 	local KV_MICRO=${x%%-*}
 
-	local list= x= xx= y= args= cnt=0
+	local list= x= xx= y= args= mpargs= cnt=0 a=
 	for x in "${KV}" \
 		${KV_MAJOR}.${KV_MINOR}.${KV_MICRO} \
 		${KV_MAJOR}.${KV_MINOR} \
@@ -34,25 +34,30 @@ start()
 	[ -z "${list}" ] && list=${modules}
 
 	for x in ${list}; do
-		ebegin "Loading module ${x}"
+		a=${x#*:}
+		if [ "${a}" = "${x}" ]; then
+			unset mpargs
+			ebegin "Loading module ${x}"
+		else
+			x=${x%%:*}
+			mpargs="-o ${a}"
+			ebegin "Loading module ${x} as ${a}"
+		fi
+		aa=$(shell_var "${a}")
 		xx=$(shell_var "${x}")
 		for y in "${KV}" \
 			${KV_MAJOR}.${KV_MINOR}.${KV_MICRO} \
 			${KV_MAJOR}.${KV_MINOR} \
 		; do
+			eval args=\$module_${aa}_args_$(shell_var "${y}")
+			[ -n "${args}" ] && break
 			eval args=\$module_${xx}_args_$(shell_var "${y}")
 			[ -n "${args}" ] && break
 		done
+		[ -z "${args}" ] && eval args=\$module_${aa}_args
 		[ -z "${args}" ] && eval args=\$module_${xx}_args
-		eval modprobe -q "${x}" "${args}"
+		eval modprobe -q "${mpargs}" "${x}" "${args}"
 		eend $? "Failed to load ${x}" && cnt=$((${cnt} + 1))
 	done
 	einfo "Autoloaded ${cnt} module(s)"
-
-	# Just in case a sysadmin prefers generic symbolic links in
-	# /lib/modules/boot for boot time modules we will load these modules
-	[ -n "$(modprobe -l -t boot)" ] && modprobe -a -t boot \* 2>/dev/null
-	
-	# Above test clobbers the return
-	return 0
 }

init.d/mount-ro.in

@@ -0,0 +1,45 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Re-mount filesytems read-only for a clean reboot."
+
+depend()
+{
+	need killprocs savecache
+	keyword noprefix noopenvz novserver
+}
+
+start()
+{
+	# Flush all pending disk writes now
+	sync; sync
+
+	ebegin "Remounting remaining filesystems read-only"
+	# We need the do_unmount function
+	. "${RC_LIBDIR}"/sh/rc-mount.sh
+	eindent
+	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|${RC_SVCDIR}" x= fs=
+	# RC_NO_UMOUNTS is an env var that can be set by plugins
+	local OIFS=$IFS SIFS=${IFS-y} IFS=$IFS
+	IFS=$IFS:
+	for x in ${no_umounts} ${RC_NO_UMOUNTS}; do
+		m="${m}|${x}"
+	done
+	if [ "${SIFS}" = y ]; then
+		IFS=$OIFS
+	else
+		unset IFS
+	fi
+	m="^(${m})$"
+	fs=
+	for x in ${net_fs_list}; do
+		fs="${fs}${fs:+|}${x}"
+	done
+	[ -n "${fs}" ] && fs="^(${fs})$"
+	do_unmount "umount -r" \
+		--skip-point-regex "${m}" \
+		${fs:+--skip-fstype-regex} ${fs} --nonetdev
+	eoutdent
+	eend $?
+}

init.d/net.lo.in

@@ -28,7 +28,7 @@ depend()
 		*) after net.lo net.lo0;;
 	esac
 
-	if type depend_${IFVAR} >/dev/null 2>&1; then
+	if [ "$(command -v "depend_${IFVAR}")" = "depend_${IFVAR}" ]; then
 		depend_${IFVAR}
 	fi
 
@@ -344,7 +344,7 @@ _load_modules()
 		# Wrap our provides
 		local f=
 		for f in pre_start start post_start; do 
-			eval "${provides}_${f}() { type ${mod}_${f} >/dev/null 2>&1 || return 0; ${mod}_${f} \"\$@\"; }"
+			eval "${provides}_${f}() { [ "$(command -v "${mod}_${f}")" = "${mod}_${f}" ] || return 0; ${mod}_${f} \"\$@\"; }"
 		done
 
 		eval module_${mod}_provides="${provides}"
@@ -358,7 +358,7 @@ _load_modules()
 			eval x=\$module_${mod}_provides
 			[ -z "${x}" ] && continue
 			for f in pre_start start post_start; do 
-				eval "${x}_${f}() { type ${mod}_${f} >/dev/null 2>&1 || return 0; ${mod}_${f} \"\$@\"; }"
+				eval "${x}_${f}() { [ "$(command -v "${mod}_${f}")" = "${mod}_${f}" ] || return 0; ${mod}_${f} \"\$@\"; }"
 			done
 			eval module_${x}_providedby="${mod}"
 			;;
@@ -445,6 +445,35 @@ _load_config()
 	config_index=-1
 }
 
+# Support functions
+_run_if()
+{
+	local cmd=$1 iface=$2 ifr=${IFACE} ifv=${IFVAR}
+	# Ensure that we don't stamp on real values
+	local IFACE= IFVAR=
+	shift
+	if [ -n "${iface}" ]; then
+		IFACE="${iface}"
+		[ "${iface}" != "${ifr}" ] && IFVAR=$(shell_var "${IFACE}")
+	else
+		IFACE=${ifr}
+		IFVAR=${ifv}
+	fi
+	${cmd}
+}
+interface_exists()
+{
+	_run_if _exists "$@"
+}
+interface_up()
+{
+	_run_if _up "$@"
+}
+interface_down()
+{
+	_run_if _down "$@"
+}
+
 start()
 {
 	local IFACE=${RC_SVCNAME#*.} oneworked=false module=
@@ -462,7 +491,7 @@ start()
 	# We up the iface twice if we have a preup to ensure it's up if
 	# available in preup and afterwards incase the user inadvertently
 	# brings it down
-	if type preup >/dev/null 2>&1; then
+	if [ "$(command -v preup)" = "preup" ]; then
 		_up 2>/dev/null
 		ebegin "Running preup"
 		eindent
@@ -473,7 +502,7 @@ start()
 	_up 2>/dev/null
 	
 	for module in ${MODULES}; do
-		if type "${module}_pre_start" >/dev/null 2>&1; then
+		if [ "$(command -v "${module}_pre_start")" = "${module}_pre_start" ]; then
 			${module}_pre_start || exit $?
 		fi
 	done
@@ -522,7 +551,7 @@ start()
 			null) :;;
 			[0-9]*|*:*) _add_address ${config};;
 			*)
-				if type "${config}_start" >/dev/null 2>&1; then
+				if [ "$(command -v "${config}_start")" = "${config}_start" ]; then
 					"${config}"_start
 				else
 					eerror "nothing provides \`${config}'"
@@ -547,7 +576,7 @@ start()
 	done
 
 	if ! ${oneworked}; then
-		if type failup >/dev/null 2>&1; then
+		if [ "$(command -v failup)" = "failup" ]; then
 			ebegin "Running failup"
 			eindent
 			failup
@@ -566,7 +595,7 @@ ${routes}"
 		fi
 	fi
 
-	local OIFS="${IFS}" SIFS=${IFS-y}
+	local OIFS="${IFS}" SIFS="${IFS-y}"
 	local IFS="$__IFS"
 	for cmd in ${routes}; do
 		unset IFS
@@ -581,7 +610,8 @@ ${routes}"
 			-net" "*|-host" "*);;
 			*" "netmask" "*)                   cmd="-net ${cmd}";;
 			*.*.*.*/32*)                       cmd="-host ${cmd}";;
-			*.*.*.*/*|0.0.0.0" "*|default" "*) cmd="-net ${cmd}";;
+			*.*.*.*/*|0.0.0.0|0.0.0.0" "*)     cmd="-net ${cmd}";;
+			default|default" "*)               cmd="-net ${cmd}";;
 			*)                                 cmd="-host ${cmd}";;
 		esac
 		if ${hidefirstroute}; then
@@ -600,12 +630,12 @@ ${routes}"
 	fi
 
 	for module in ${MODULES}; do
-		if type "${module}_post_start" >/dev/null 2>&1; then
+		if [ "$(command -v "${module}_post_start")" = "${module}_post_start" ]; then
 			${module}_post_start || exit $?
 		fi
 	done
 
-	if type postup >/dev/null 2>&1; then
+	if [ "$(command -v postup)" = "postup" ]; then
 		ebegin "Running postup"
 		eindent
 		postup 
@@ -628,7 +658,7 @@ stop()
 		_load_modules false
 	fi
 
-	if type predown >/dev/null 2>&1; then
+	if [ "$(command -v predown)" = "predown" ]; then
 		ebegin "Running predown"
 		eindent
 		predown || return 1
@@ -641,35 +671,40 @@ stop()
 	fi
 
 	for module in ${MODULES}; do
-		if type "${module}_pre_stop" >/dev/null 2>&1; then
+		if [ "$(command -v "${module}_pre_stop")" = "${module}_pre_stop" ]; then
 			${module}_pre_stop || exit $?
 		fi
 	done
 
 	for module in ${MODULES}; do
-		if type "${module}_stop" >/dev/null 2>&1; then
+		if [ "$(command -v "${module}_stop")" = "${module}_stop" ]; then
 			${module}_stop
 		fi
 	done
 
 	# Only delete addresses for non PPP interfaces
-	if ! type is_ppp >/dev/null 2>&1 || ! is_ppp; then
+	if ! [ "$(command -v is_ppp)" = "is_ppp" ] || ! is_ppp; then
 		_delete_addresses "${IFACE}"
 	fi
 
 	for module in ${MODULES}; do
-		if type "${module}_post_stop" >/dev/null 2>&1; then
+		if [ "$(command -v "${module}_post_stop")" = "${module}_post_stop" ]; then
 			${module}_post_stop
 		fi
 	done
 
-	! yesno ${IN_BACKGROUND} && \
-	[ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ] && \
-	_down 2>/dev/null
+	# If not in background, and not loopback then bring the interface down
+	# unless overridden.
+	if ! yesno ${IN_BACKGROUND} && \
+	[ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
+		eval module=\$ifdown_${IFVAR}
+		module=${module:-${ifdown:-YES}}
+		yesno ${module} && _down 2>/dev/null
+	fi
 
 	type resolvconf >/dev/null 2>&1 && resolvconf -d "${IFACE}" 2>/dev/null
 
-	if type postdown >/dev/null 2>&1; then
+	if [ "$(command -v "postdown")" = "postdown" ]; then
 		ebegin "Running postdown"
 		eindent
 		postdown

init.d/netmount.in

@@ -23,18 +23,19 @@ depend()
 {
 	# Only have portmap as a dependency if there is a nfs mount in fstab
 	# that is set to mount at boot
-	local pmap=""
+	local pmap=
 	if need_portmap; then
-		pmap="${pmap} rpc.statd"
+		pmap="rpc.statd"
 		[ -x @SYSCONFDIR@/init.d/rpcbind ] \
-			&& pmap="rpcbind" \
-			|| pmap="portmap"
+			&& pmap="${pmap} rpcbind" \
+			|| pmap="${pmap} portmap"
 	fi
 
 	config /etc/fstab
 	need net ${pmap}
-	use afc-client amd autofs dns nfs nfsmount portmap rpcbind rpc.statd
-	keyword nojail noopenvz noprefix novserver
+	use afc-client amd autofs openvpn
+	use dns nfs nfsmount portmap rpcbind rpc.statd rpc.lockd
+	keyword nojail noprefix novserver
 }
 
 start()

init.d/procfs.in

@@ -6,6 +6,7 @@ description="Mounts misc filesystems in /proc."
 
 depend()
 {
+	use devfs
 	need localmount
 	keyword noopenvz noprefix novserver
 }
@@ -26,7 +27,7 @@ start()
 		local usbfs=$(grep -Fow usbfs /proc/filesystems ||
 					  grep -Fow usbdevfs /proc/filesystems)
 		if [ -n "${usbfs}" ]; then
-			ebegin "Mounting USB device filesystem (${usbfs})"
+			ebegin "Mounting USB device filesystem [${usbfs}]"
 			local usbgid="$(getent group usb | \
 				sed -e 's/.*:.*:\(.*\):.*/\1/')"
 			mount -t ${usbfs} \
@@ -39,7 +40,7 @@ start()
 	# Setup Kernel Support for the NFS daemon status
 	if [ -d /proc/fs/nfsd ] && ! mountinfo -q /proc/fs/nfsd; then
 		if grep -qs nfsd /proc/filesystems; then
-			ebegin "Mounting nfsd filesystem"
+			ebegin "Mounting NFS filesystem"
 			mount -t nfsd -o nodev,noexec,nosuid \
 				nfsd /proc/fs/nfsd
 			eend $?
@@ -56,26 +57,6 @@ start()
 		fi
 	fi
 
-	# Setup Kernel Support for securityfs
-	if [ -d /sys/kernel/security ] && ! mountinfo -q /sys/kernel/security; then
-		if grep -qs securityfs /proc/filesystems; then
-			ebegin "Mounting security filesystem"
-			mount -t securityfs -o nodev,noexec,nosuid \
-				securityfs /sys/kernel/security
-			eend $?
-		fi
-	fi
-
-	# Setup Kernel Support for debugfs
-	if [ -d /sys/kernel/debug ] && ! mountinfo -q /sys/kernel/debug; then
-		if grep -qs debugfs /proc/filesystems; then
-			ebegin "Mounting debug filesystem"
-			mount -t debugfs -o nodev,noexec,nosuid \
-				debugfs /sys/kernel/debug
-			eend $?
-		fi
-	fi
-
 	# Setup Kernel Support for SELinux
 	if [ -d /selinux ] && ! mountinfo -q /selinux; then
 		if grep -qs selinuxfs /proc/filesystems; then

init.d/root.in

@@ -13,7 +13,7 @@ depend()
 start()
 {
 	if echo 2>/dev/null >/.test.$$; then
-		rm -f /.test.$$
+		rm -f /.test.$$ /fastboot /forcefsck
 		return 0
 	fi
 
@@ -22,5 +22,7 @@ start()
 		Linux)	mount -n -o remount,rw /;;
 		*)	mount -u -o rw /;;
 	esac
-	eend $? "Root filesystem could not be mounted read/write"
+	if eend $? "Root filesystem could not be mounted read/write"; then
+		rm -f /fastboot /forcefsck
+	fi
 }

init.d/savecache.in

@@ -0,0 +1,25 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Saves the caches OpenRC uses to non volatile storage"
+
+start()
+{
+	ebegin "Saving dependency cache"
+	if [ ! -d "${RC_LIBDIR}"/cache ]; then
+		rm -rf "${RC_LIBDIR}"/cache
+		if ! mkdir "${RC_LIBDIR}"/cache; then
+			eend $?
+			return $?
+		fi
+	fi
+	local save=
+	for x in deptree depconfig softlevel nettree rc.log; do
+		[ -e "${RC_SVCDIR}/${x}" ] && save="${save} ${RC_SVCDIR}/${x}"
+	done
+	if [ -n "${save}" ]; then
+		cp -p ${save} "${RC_LIBDIR}"/cache 2>/dev/null
+	fi
+	eend $?
+}

init.d/syscons.in

@@ -49,10 +49,10 @@ start() {
 
 	local v= f=
 	for v in font8x16 font8x14 font8x8; do
-		f=$(eval \$"${v}")
+		eval f=\$${v}
 		if [ -n "${f}" ]; then
 			ebegin "Setting font ${f}"
-			vidcontrol -f ${v##FONT} ${f}
+			vidcontrol -f ${v##font} ${f}
 			eend $?
 		fi
 	done

init.d/sysctl.Linux.in

@@ -6,7 +6,7 @@ depend()
 {
 	use hostname
 	before bootmisc logger
-	keyword noprefix
+	keyword noopenvz noprefix novserver
 }
 
 start()

init.d/sysfs.in

@@ -0,0 +1,63 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Mount the sys filesystem."
+
+depend()
+{
+	keyword noprefix novserver
+}
+
+mount_sys()
+{
+	grep -Eq "[[:space:]]+sysfs$" /proc/filesystems || return 1
+	mountinfo -q /sys && return 0
+
+	if [ ! -d /sys ]; then
+		if ! mkdir -m 0755 /sys; then
+			ewarn "Could not create /sys!"
+			return 1
+		fi
+	fi
+
+	ebegin "Mounting /sys"
+	if ! fstabinfo --mount /sys; then
+		mount -n -t sysfs -o noexec,nosuid,nodev sysfs /sys
+	fi
+	eend $?
+}
+
+mount_misc()
+{
+	# Setup Kernel Support for securityfs
+	if [ -d /sys/kernel/security ] && ! mountinfo -q /sys/kernel/security; then
+		if grep -qs securityfs /proc/filesystems; then
+			ebegin "Mounting security filesystem"
+			mount -n -t securityfs -o nodev,noexec,nosuid \
+				securityfs /sys/kernel/security
+			eend $?
+		fi
+	fi
+
+	# Setup Kernel Support for debugfs
+	if [ -d /sys/kernel/debug ] && ! mountinfo -q /sys/kernel/debug; then
+		if grep -qs debugfs /proc/filesystems; then
+			ebegin "Mounting debug filesystem"
+			mount -n -t debugfs -o nodev,noexec,nosuid \
+				debugfs /sys/kernel/debug
+			eend $?
+		fi
+	fi
+}
+
+start()
+{
+	local retval
+	mount_sys
+	retval=$?
+	if [ ${retval} -eq 0 ]; then
+		mount_misc
+	fi
+	return ${retval}
+}

init.d/termencoding.in

@@ -0,0 +1,35 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Configures terminal encoding."
+
+ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
+unicode=${unicode:-${UNICODE}}
+
+depend()
+{
+	keyword noopenvz noprefix nouml novserver noxenu
+}
+
+start()
+{
+	local ttydev=/dev/tty n=
+	[ -d /dev/vc ] && ttydev=/dev/vc/
+
+	# Set terminal encoding to either ASCII or UNICODE.
+	# See utf-8(7) for more information.
+	local termencoding="%@" termmsg="ASCII"
+	if yesno ${unicode}; then
+		termencoding="%G"
+		termmsg="UTF-8"
+	fi
+
+	ebegin "Setting terminal encoding [${termmsg}]"
+	n=1
+	while [ ${n} -le "${ttyn}" ]; do
+		printf "\033%s" "${termencoding}" >"${ttydev}${n}"
+		n=$((${n} + 1))
+	done
+	eend 0
+}

man/Makefile

@@ -18,7 +18,7 @@ MAKE_LINKS=	suffix=$${man\#*.}; \
 
 MK=		../mk
 include ${MK}/sys.mk
-include ${MK}/gitignore.mk
+include ${MK}/svnignore.mk
 
 all:
 

man/einfo.3

@@ -202,4 +202,4 @@ Rinse and repeat for the other verbose functions.
 .Sh SEE ALSO
 .Xr printf 3 ,
 .Sh AUTHORS
-.An "Roy Marples" Aq roy@marples.name
+.An Roy Marples <roy@marples.name>

man/rc-service.8

@@ -61,4 +61,4 @@ does the same and also prints the full path of the service to stdout.
 .Xr rc 8 ,
 .Xr stdout 3
 .Sh AUTHORS
-.An "Roy Marples" Aq roy@marples.name
+.An Roy Marples <roy@marples.name>

man/rc-status.8

@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd Feb 22, 2008
+.Dd Arp 9, 2008
 .Dt RC-STATUS 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -36,7 +36,8 @@
 .Nm
 gathers and displays information about the status of services 
 in different runlevels.  The default behavior is to show information 
-about the current runlevel, but any runlevel can be quickly examined.
+about the current runlevel and any unassgined services that are not stopped,
+but any runlevel can be quickly examined.
 .Pp
 The options are as follows:
 .Bl -tag -width ".Fl test , test string"
@@ -60,4 +61,4 @@ Show information only for the named
 .Xr rc 8 ,
 .Xr rc-update 8
 .Sh AUTHORS
-.An "Roy Marples" Aq roy@marples.name
+.An Roy Marples <roy@marples.name>

man/rc-update.8

@@ -77,4 +77,4 @@ Show all services.
 .Xr rc 8 ,
 .Xr rc-status 8
 .Sh AUTHORS
-.An "Roy Marples" Aq roy@marples.name
+.An Roy Marples <roy@marples.name>

man/rc.8

@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd Feb 22, 2008
+.Dd November 03, 2008
 .Dt RC 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -60,18 +60,25 @@ sysinit always runs when the host first starts should not be run again.
 Generally the only services you should add to the boot runlevel are those
 which deal with the mounting of filesystems, set the initial state of attached
 peripherals and logging.
-Coldplugged services are added to the boot runlevel by the system.
-All services in the boot runlevel are automatically included in all other
-runlevels except for those listed here.
+Hotplugged services are added to the boot runlevel by the system.
+All services in the boot and sysinit runlevels are automatically included
+in all other runlevels except for those listed here.
 .It Ar single
-Stops all services and enters single user mode.
-.It Ar reboot
-Changes to the single runlevel and then reboots the host.
+Stops all services except for those in the sysinit runlevel.
 .It Ar shutdown
 Changes to the single runlevel and then halts the host.
 .El
+.Pp
+You should not call any of these runlevels yourself.
+Instead you should use
+.Xr init 8
+and
+.Xr shutdown 8
+and let them call these special runlevels.
 .Sh SEE ALSO
 .Xr rc-status 8 ,
-.Xr rc-update 8
+.Xr rc-update 8 ,
+.Xr init 8 ,
+.Xr shutdown 8
 .Sh AUTHORS
-.An "Roy Marples" Aq roy@marples.name
+.An Roy Marples <roy@marples.name>

man/rc_config.3

@@ -70,4 +70,4 @@ is set to
 .Xr rc_stringlist_free 3 ,
 .Xr sh 1
 .Sh AUTHORS
-.An "Roy Marples" Aq roy@marples.name
+.An Roy Marples <roy@marples.name>

man/rc_deptree.3

@@ -110,4 +110,4 @@ when done.
 .Xr rc_stringlist_free 3 ,
 .Xr runscript 8
 .Sh AUTHORS
-.An "Roy Marples" Aq roy@marples.name
+.An Roy Marples <roy@marples.name>

man/rc_find_pids.3

@@ -67,4 +67,4 @@ Each RC_PID should be freed in the list as well as the list itself when done.
 .Xr free 3 ,
 .Xr queue 3
 .Sh AUTHORS
-.An "Roy Marples" Aq roy@marples.name
+.An Roy Marples <roy@marples.name>

man/rc_plugin_hook.3

@@ -48,4 +48,4 @@ Plugins can affect the parent environemnt by writing NULL separated strings to
 .Xr rc 8 ,
 .Xr runscript 8
 .Sh AUTHORS
-.An "Roy Marples" Aq roy@marples.name
+.An Roy Marples <roy@marples.name>

man/rc_runlevel.3

@@ -63,4 +63,4 @@ Rinse and repeat for the other verbose functions.
 .Xr free 3
 .Xr rc_stringlist_free 3
 .Sh AUTHORS
-.An "Roy Marples" Aq roy@marples.name
+.An Roy Marples <roy@marples.name>

man/rc_service.3

@@ -31,11 +31,10 @@
 .Nm rc_service_mark , rc_service_extra_commands , rc_service_plugable ,
 .Nm rc_service_resolve , rc_service_schedule_start , rc_services_scheduled_by ,
 .Nm rc_service_schedule_clear , rc_service_state ,
-.Nm rc_service_start , rc_service_stop ,
 .Nm rc_service_started_daemon , rc_service_value_get , rc_service_value_set ,
 .Nm rc_services_in_runlevel , rc_services_in_state , rc_services_scheduled ,
 .Nm rc_service_daemons_crashed
-.Nd functions to start, stop and query OpenRC services
+.Nd functions to query OpenRC services
 .Sh LIBRARY
 Run Command library (librc, -lrc)
 .Sh SYNOPSIS
@@ -66,8 +65,6 @@ Run Command library (librc, -lrc)
 .Ft "RC_STRINGLIST *" Fn rc_services_scheduled_by "const char *service"
 .Ft bool Fn rc_service_schedule_clear "const char *service"
 .Ft RC_SERVICE Fn rc_service_state "const char *service"
-.Ft pid_t Fn rc_service_start "const char *service"
-.Ft pid_t Fn rc_service_stop "const char *service"
 .Ft bool Fo rc_service_started_daemon
 .Fa "const char *service"
 .Fa "const char *exec"
@@ -176,16 +173,6 @@ clears these scheduled services for
 .Fa service .
 The return value is a bitmask, where more than one state can apply.
 .Pp
-.Fn rc_service_start
-starts
-.Fa service ,
-returning the pid of new process.
-.Pp
-.Fn rc_service_stop
-stops
-.Fa service ,
-returning the pid of new process.
-.Pp
 .Fn rc_service_started_daemon
 checks to see if
 .Fa service
@@ -240,4 +227,4 @@ normally holds the volatile state data for services on a RAM backed disk.
 .Xr rc_stringlist_free 3 ,
 .Xr start-stop-daemon 8
 .Sh AUTHORS
-.An "Roy Marples" Aq roy@marples.name
+.An Roy Marples <roy@marples.name>

man/rc_stringlist.3

@@ -85,4 +85,4 @@ itself.
 .Xr queue 3 ,
 .Xr strcmp 3
 .Sh AUTHORS
-.An "Roy Marples" Aq roy@marples.name
+.An Roy Marples <roy@marples.name>

man/runscript.8

@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd Mar 19, 2008
+.Dd September 19, 2008
 .Dt RUNSCRIPT 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -111,11 +111,11 @@ You should define a
 function for the service so that
 .Nm
 will start and stop it in the right order in relation to other services.
-As it's a function it can be very flexable, see the example below.
+As it's a function it can be very flexible, see the example below.
 Here is a list of the functions you can use in a
 .Ic depend
 function. You simply pass the names of the services to it to add to that
-dpendency type, or prefix it with ! to remove it.
+dependency type, or prefix it with ! to remove it.
 .Bl -tag -width "RC_DEFAULTLEVEL" 
 .It Ic need
 The service will refuse to start until needed services have started and it
@@ -173,8 +173,9 @@ If
 does not equal 0 then output the string using
 .Ic eerror
 and !! in square brackets
-at the end of the line. Otherwise output ok in square brackets at the end of
-the line. The value of
+at the end of the line.
+Otherwise output ok in square brackets at the end of the line.
+The value of
 .Ar retval
 is returned.
 .It Ic ewend Ar retval Op Ar string
@@ -193,6 +194,14 @@ output when the environment variable
 .Va EINFO_VERBOSE
 is true.
 .Bl -tag -width indent
+.It Ic ewaitfile Ar timeout Ar file1 Ar file2 ...
+Wait for
+.Ar timeout
+seconds until all files exist.
+Returns 0 if all files exist, otherwise non zero.
+If
+.Ar timeout
+is less then 1 then we wait indefinitely.
 .It Ic is_newer_than Ar file1 Ar file2 ...
 If
 .Ar file1
@@ -205,7 +214,7 @@ is a directory, then check all it's contents too.
 .It Ic is_older_than Ar file1 Ar file2 ...
 If
 .Ar file1
-is older than
+is newer than
 .Ar file2
 return 0, otherwise 1.
 If
@@ -432,6 +441,16 @@ show()
 }
 
 .Ed
+.Sh BUGS
+Because of the way we load our configuration files and the need to handle
+more than one service directory, you can only use symlinks in service
+directories to other services in the same directory.
+You cannot symlink to a service in a different directory even if it is
+another service directory.
+.Pp
+is_older_than should return 0 on success.
+Instead we return 1 to be compliant with Gentoo baselayout.
+Users are encouraged to use the is_newer_than function which returns correctly.
 .Sh SEE ALSO
 .Xr einfo 3 ,
 .Xr rc 8 ,
@@ -442,4 +461,4 @@ show()
 .Xr start-stop-daemon 8 ,
 .Xr uname 1
 .Sh AUTHORS
-.An "Roy Marples" Aq roy@marples.name
+.An Roy Marples <roy@marples.name>

man/start-stop-daemon.8

@@ -1,4 +1,4 @@
-.\" Copyright 2007-2008 Roy Marples
+.\" Copyright 2007-2009 Roy Marples
 .\" All rights reserved
 .\"
 .\" Redistribution and use in source and binary forms, with or without
@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd Feb 24, 2008
+.Dd January 1, 2009
 .Dt START-STOP-DAEMON 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -44,6 +44,11 @@
 .Sh DESCRIPTION
 .Nm
 provides a consistent method of starting, stopping and signalling daemons.
+If neither
+.Fl K , -stop
+nor
+.Fl s , -signal
+are provided, then we assume we are starting the daemon.
 If a daemon cannot background by itself, nor create a pidfile,
 .Nm
 can do it for the daemon in a secure fashion.
@@ -67,16 +72,8 @@ Here are the options to specify the daemon and how it should start or stop:
 The
 .Ar daemon
 we start or stop.
-If the
-.Ar daemon
-is a script and you are not using the pidfile or process name options,
-then you should replace
-.Ar daemon
-with the interpreter and pass
-.Ar daemon
-as an argument. Below is an example:
-.Pp
-start-stop-daemon -Sx /usr/bin/perl -- /usr/bin/daemon.pl
+If this option is not specified, then the first non option argument
+is used.
 .It Fl p , -pidfile Ar pidfile
 When starting, we expect the daemon to create a valid
 .Ar pidfile
@@ -97,10 +94,17 @@ name here also.
 .It Fl t , -test
 Print the action(s) that would be taken, but don't actually do anything.
 The return value is set as if the command was taken and worked.
+.It Fl v , -verbose
+P
+Print the action(s) that are taken just before doing them.
 .El
 .Pp
 These options are only used for starting daemons:
 .Bl -tag -width indent
+.It Fl a , -startas Ar name
+Change the process name of the daemon to
+.Ar name .
+This just changes the first argument passed to the daemon.
 .It Fl b , -background
 Force the daemon into the background. Some daemons don't create pidfiles, so a
 good trick is to get the daemon to run in the foreground, and use the this
@@ -112,10 +116,16 @@ chdir to this directory before starting the daemon.
 .It Fl r , -chroot Ar path
 chroot to this directory before starting the daemon. All other paths, such
 as the path to the daemon, chdir and pidfile, should be relative to the chroot.
+.It Fl c , -chuid Ar user
+Same as the
+.Fl u , -user
+option.
 .It Fl e , -env Ar VAR=VALUE
 Set the environment variable VAR to VALUE.
 .It Fl g , -group Ar group
 Start the daemon as in the group.
+.It Fl k , -umask Ar mode
+Set the umask of the daemon.
 .It Fl m , -make-pidfile
 Saves the pid of the daemon in the file specified by the
 .Fl p , -pidfile
@@ -123,7 +133,7 @@ option. Only useful when used with daemons that run in the foreground and
 forced into the background with the
 .Fl -b , -background
 option.
-.It Fl n , -nice Ar level
+.It Fl N , -nice Ar level
 Modifies the scheduling priority of the daemon.
 .It Fl 1 , -stdout Ar logfile
 Redirect the standard output of the process to logfile when started with
@@ -142,9 +152,19 @@ These options are only used for stopping daemons:
 .It Fl R , -retry Ar timeout | Ar signal Ns / Ns Ar timeout
 You can either specify a timeout or a multiple signal/timeout pairs as a
 stopping schedule.
-If not specified then a default value of SIGTERM/5 is
+If not specified then a default value of SIGTERM/0 is
 assumed.
 .El
+.Sh ENVIRONMENT
+.Va SSD_NICELEVEL
+can also set the scheduling priority of the daemon, but the command line
+option takes precedence.
+.Pp
+.Va SSD_STARTWAIT
+overrides the number of milliseconds set in
+.Pa /etc/rc.conf
+.Nm
+waits for to check the daemon is still running.
 .Sh NOTE
 .Nm
 uses
@@ -159,6 +179,9 @@ to stop or signal.
 .Xr getopt 3 ,
 .Xr nice 2 ,
 .Xr rc_find_pids 3
+.Sh BUGS
+.Nm
+cannot stop an interpreted daemon that no longer exists without a pidfile.
 .Sh HISTORY
 .Nm
 first appeared in Debian.
@@ -166,4 +189,4 @@ first appeared in Debian.
 This is a complete re-implementation with the process finding code in the
 OpenRC library (librc, -lrc) so other programs can make use of it.
 .Sh AUTHORS
-.An "Roy Marples" Aq roy@marples.name
+.An Roy Marples <roy@marples.name>

mk/cc.mk

@@ -1,5 +1,4 @@
 # Copyright 2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
 
 # Setup some good default CFLAGS
 CFLAGS?=	-O2
@@ -10,15 +9,25 @@ _CSTD_SH=	if test -n "${CSTD}"; then echo "-std=${CSTD}"; else echo ""; fi
 _CSTD!=		${_CSTD_SH}
 CFLAGS+=	${_CSTD}$(shell ${_CSTD_SH})
 
-# Try and use some good cc flags
-_CC_FLAGS=	-pedantic -Wall -Wunused -Wimplicit -Wshadow -Wformat=2 \
-		-Wmissing-declarations -Wno-missing-prototypes -Wwrite-strings \
-		-Wbad-function-cast -Wnested-externs -Wcomment -Winline \
-		-Wchar-subscripts -Wcast-align -Wno-format-nonliteral \
-		-Wdeclaration-after-statement -Wsequence-point -Wextra
-_CC_FLAGS_SH=	for f in ${_CC_FLAGS}; do \
-		if ${CC} $$f -S -o /dev/null -xc /dev/null >/dev/null 2>&1; \
+# Try and use some good cc flags if we're building from git
+# We don't use -pedantic as it will warn about our perfectly valid
+# use of %m in our logger.
+_CCFLAGS=	-Wall -Wextra -Wimplicit -Wshadow -Wformat=2 \
+		-Wmissing-prototypes -Wmissing-declarations \
+		-Wmissing-noreturn -Wmissing-format-attribute \
+		-Wnested-externs \
+		-Winline -Wwrite-strings -Wcast-align -Wcast-qual \
+		-Wpointer-arith \
+		-Wdeclaration-after-statement -Wsequence-point
+
+# We should be using -Wredundant-decls, but our library hidden proto stuff
+# gives loads of warnings. I don't fully understand it (the hidden proto,
+# not the warning) so we just silence the warning.
+
+_CC_FLAGS_SH=	for f in ${_CCFLAGS}; do \
+		if echo "int main(void) { return 0;} " | \
+		${CC} $$f -S -xc -o /dev/null - ; \
 		then printf "%s" "$$f "; fi \
-		done
+		done;
 _CC_FLAGS!=	${_CC_FLAGS_SH}
-CFLAGS+=	${_CC_FLAGS}$(shell ${CC_FLAGS_SH})
+CFLAGS+=	${_CC_FLAGS}$(shell ${_CC_FLAGS_SH})

mk/debug.mk

@@ -4,7 +4,7 @@
 
 _RC_DEBUG_SH=	case "${DEBUG}" in "") echo "";; *) echo "-DRC_DEBUG";; esac
 _RC_DEBUG!=	${_RC_DEBUG_SH}
-CFLAGS+=	${_RC_DEBUG}$(shell ${_RC_DEBUG_SH})
+CPPFLAGS+=	${_RC_DEBUG}$(shell ${_RC_DEBUG_SH})
 
 # Should we enable this with a different flag?
 _LD_DEBUG_SH=	case "${DEBUG}" in "") echo "";; *) echo "-Wl,--rpath=../librc -Wl,--rpath=../libeinfo";; esac

mk/depend-.mk

@@ -0,0 +1,2 @@
+# This space left intentionally blank because gmake does not load .depend
+# by default

mk/depend-gmake.mk

@@ -0,0 +1,3 @@
+# Tell gmake to include the optional dependency file.
+# This sucks, but I don't know any other way of portably making this work.
+-include .depend

mk/depend.mk

@@ -1,13 +1,17 @@
-# This only works for make implementations that always include a .depend if
-# it exists. Only GNU make does not do this.
-
+# Generate .depend
 # Copyright 2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
 
 CLEANFILES+=	.depend
 IGNOREFILES+=	.depend
 
 .depend: ${SRCS}
-	${CC} ${CFLAGS} -MM ${SRCS} > .depend
+	${CC} ${CPPFLAGS} -MM ${SRCS} > .depend
 
-depend: .depend
+depend: .depend extra_depend
+
+# Nasty hack. depend-.mk is a blank file, depend-gmake.mk has a gmake specific
+# command to optionally include .depend.
+# Someone should patch gmake to optionally include .depend if it exists.
+_INC_DEP=	$(shell if ${MAKE} --version | grep -q "^GNU "; then \
+		echo "gmake"; else echo ""; fi)
+include ${MK}/depend-${_INC_DEP}.mk

mk/dist.mk

@@ -2,11 +2,12 @@
 # Copyright 2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
-GITREF?=	HEAD
 DISTPREFIX?=	${NAME}-${VERSION}
 DISTFILE?=	${DISTPREFIX}.tar.bz2
 
 CLEANFILES+=	${DISTFILE}
 
 dist:
-	git archive --prefix=${DISTPREFIX}/ ${GITREF} | bzip2 > ${DISTFILE}
+	svn export . ${DISTPREFIX}
+	tar cjpf ${DISTFILE} ${DISTPREFIX}
+	rm -rf ${DISTPREFIX}

mk/gitignore.mk

@@ -1,15 +0,0 @@
-# rules to make .gitignore files
-# Copyright 2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-IGNOREFILES+=	${CLEANFILES}
-
-.PHONY:		.gitignore
-
-.gitignore:
-	@if test -n "${IGNOREFILES}"; then \
-		echo "Ignoring ${IGNOREFILES}"; \
-		echo ${IGNOREFILES} | tr ' ' '\n' > .gitignore; \
-	fi
-
-gitignore: .gitignore

mk/lib.mk

@@ -16,8 +16,11 @@ CLEANFILES+=		${OBJS} ${SOBJS} ${_LIBS} ${SHLIB_LINK}
 
 .SUFFIXES:		.So
 
+.c.o:
+	${CC} ${CFLAGS} ${CPPFLAGS} -c $< -o $@
+
 .c.So:
-	${CC} ${PICFLAG} -DPIC ${CFLAGS} -c $< -o $@
+	${CC} ${PICFLAG} -DPIC ${CPPFLAGS} ${CFLAGS} -c $< -o $@
 
 all: depend ${_LIBS}
 
@@ -53,7 +56,12 @@ check test::
 clean:
 	rm -f ${OBJS} ${SOBJS} ${_LIBS} ${SHLIB_LINK} ${CLEANFILES}
 
+extra_depend:
+	@TMP=depend.$$$$; \
+	${SED} -e 's/^\([^\.]*\).o[ ]*:/\1.o \1.So:/' .depend > $${TMP}; \
+	mv $${TMP} .depend
+
 include ${MK}/sys.mk
 include ${MK}/os.mk
 include ${MK}/depend.mk
-include ${MK}/gitignore.mk
+include ${MK}/svnignore.mk

mk/ncurses.mk

@@ -1,3 +1,3 @@
 LIBTERMCAP?=	-lncurses
-CFLAGS+=	-DHAVE_TERMCAP
+CPPFLAGS+=	-DHAVE_TERMCAP
 LDADD+=		${LIBTERMCAP}

mk/os-Linux.mk

@@ -1,5 +1,5 @@
 # Copyright 2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
-CFLAGS+=	-D_BSD_SOURCE -D_XOPEN_SOURCE=600
+CPPFLAGS+=	-D_BSD_SOURCE -D_XOPEN_SOURCE=600
 LIBDL=		-Wl,-Bdynamic -ldl

mk/os.mk

@@ -10,14 +10,3 @@ include ${MK}/os-${OS}.mk
 
 RC_LIB=		/$(LIBNAME)/rc
 
-_PREFIX_SH=	if test -n "${PREFIX}" && test "${PREFIX}" != "/"; then echo "-DPREFIX=\\\"${PREFIX}\\\""; else echo ""; fi
-_PREFIX!=	${_PREFIX_SH}
-CFLAGS+=	${_PREFIX}$(shell ${_PREFIX_SH})
-
-_PKG_PREFIX_SH=	if test -n "${PKG_PREFIX}" && test "${PKG_PREFIX}" != "/" && test "${PKG_PREFIX}" != "${PREFIX}"; then echo "-DPKG_PREFIX=\\\"${PKG_PREFIX}\\\""; else echo ""; fi
-_PKG_PREFIX!=	${_PKG_PREFIX_SH}
-CFLAGS+=	${_PKG_PREFIX}$(shell ${_PKG_PREFIX_SH})
-
-_LCL_PREFIX_SH=	if test -n "${LOCAL_PREFIX}" && test "${LOCAL_PREFIX}" != "/" && test "${LOCAL_PREFIX}" != "${PREFIX}"; then echo "-DLOCAL_PREFIX=\\\"${LOCAL_PREFIX}\\\""; else echo ""; fi
-_LCL_PREFIX!=	${_LCL_PREFIX_SH}
-CFLAGS+=	${_LCL_PREFIX}$(shell ${_LCL_PREFIX_SH})

mk/pam.mk

@@ -1,5 +1,5 @@
 LIBPAM?=	-lpam
-CFLAGS+=	-DHAVE_PAM
+CPPFLAGS+=	-DHAVE_PAM
 LDADD+=		${LIBPAM}
 
 PAMDIR?=	/etc/pam.d

mk/prog.mk

@@ -24,13 +24,18 @@ CLEANFILES+=		${OBJS} ${PROG}
 
 all: depend ${PROG}
 
+.c.o:
+	${CC} ${CFLAGS} ${CPPFLAGS} -c $< -o $@
+
 ${PROG}: ${SCRIPTS} ${OBJS}
 	${CC} ${LDFLAGS} -o $@ ${OBJS} ${LDADD}
 
 clean:
 	rm -f ${CLEANFILES}
 
+extra_depend:
+
 include ${MK}/sys.mk
 include ${MK}/os.mk
 include ${MK}/depend.mk
-include ${MK}/gitignore.mk
+include ${MK}/svnignore.mk

mk/scripts.mk

@@ -22,9 +22,9 @@ SED_REPLACE=		-e 's:@SHELL@:${SH}:g' -e 's:@LIB@:${LIBNAME}:g' -e 's:@SYSCONFDIR
 .in:
 	${SED} ${SED_REPLACE} ${SED_EXTRA} $< > $@
 
-all: ${OBJS}
+all: ${OBJS} ${TARGETS}
 
-realinstall: ${BIN} ${CONF} ${CONF_APPEND}
+realinstall: ${BIN} ${CONF} ${INC}
 	@if test -n "${DIR}"; then \
 		${ECHO} ${INSTALL} -d ${DESTDIR}/${DIR}; \
 		${INSTALL} -d ${DESTDIR}/${DIR} || exit $$?; \
@@ -56,4 +56,4 @@ CLEANFILES+=	${OBJS}
 clean:
 	@if test -n "${CLEANFILES}"; then echo "rm -f ${CLEANFILES}"; rm -f ${CLEANFILES}; fi 
 
-include ${MK}/gitignore.mk
+include ${MK}/svnignore.mk

mk/subdir.mk

@@ -27,5 +27,5 @@ check test::
 	${_SUBDIR}
 depend:
 	${_SUBDIR}
-gitignore:
+ignore:
 	${_SUBDIR}

mk/svnignore.mk

@@ -0,0 +1,14 @@
+# rules to make svn ignore files 
+# Copyright 2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+IGNOREFILES+=	${CLEANFILES}
+
+ignore:
+	@if test -n "${IGNOREFILES}"; then \
+		echo "=> Ignoring ${IGNOREFILES}"; \
+		files="$$(echo "${IGNOREFILES}" | tr ' ' '\n')"; \
+		efiles="$$(svn propget svn:ignore .)"; \
+		sfiles="$$(printf "$${files}\n$${efiles}" | sort -u)"; \
+		eval svn propset svn:ignore \'"$${sfiles}"\' .; \
+	fi

mk/termcap.mk

@@ -1,3 +1,3 @@
 LIBTERMCAP?=	-ltermcap
-CFLAGS+=	-DHAVE_TERMCAP
+CPPFLAGS+=	-DHAVE_TERMCAP
 LDADD+=		${LIBTERMCAP}

net/.gitignore

@@ -1,2 +0,0 @@
-ifconfig.sh
-iwconfig.sh

net/bonding.sh

@@ -4,7 +4,6 @@
 bonding_depend()
 {
 	before interface macchanger
-	program /sbin/ifenslave
 }
 
 _config_vars="$_config_vars slaves"
@@ -16,7 +15,7 @@ _is_bond()
 
 bonding_pre_start()
 {
-	local s= slaves="$(_get_array "slaves_${IFVAR}")" 
+	local x= s= slaves="$(_get_array "slaves_${IFVAR}")" 
 
 	[ -z "${slaves}" ] && return 0
 
@@ -40,6 +39,16 @@ bonding_pre_start()
 		return 1
 	fi
 
+	# Configure the bond.
+	# Nice and dynamic :)
+	for x in /sys/class/net/"${IFACE}"/bonding/*; do
+		[ -f "${x}" ] || continue
+		eval s=\$${x##*/}_${IFVAR}
+		if [ -n "${s}" ]; then
+			echo "${s}" >"${x}"
+		fi
+	done
+
 	ebegin "Adding slaves to ${IFACE}"
 	eindent
 	einfo "${slaves}"
@@ -53,7 +62,7 @@ bonding_pre_start()
 	# Must force the slaves to a particular state before adding them
 	for IFACE in ${slaves}; do
 		_delete_addresses
-		_up
+		_down
 	done
 	)
 
@@ -62,7 +71,13 @@ bonding_pre_start()
 
 	# finally add in slaves
 	eoutdent
-	/sbin/ifenslave "${IFACE}" ${slaves} >/dev/null
+	if [ -d /sys/class/net ]; then
+		for s in ${slaves}; do
+			echo "+${s}" >/sys/class/net/"${IFACE}"/bonding/slaves
+		done
+	else
+		/sbin/ifenslave "${IFACE}" ${slaves} >/dev/null
+	fi
 	eend $?
 
 	return 0 #important
@@ -84,7 +99,13 @@ bonding_stop()
 	eindent
 	einfo "${slaves}"
 	eoutdent
-	/sbin/ifenslave -d "${IFACE}" ${slaves}
+	if [ -d /sys/class/net ]; then
+		for s in ${slaves}; do
+			echo -"${s}" > /sys/class/net/"${IFACE}"/bonding/slaves
+		done
+	else
+		/sbin/ifenslave -d "${IFACE}" ${slaves}
+	fi
 
 	# reset all slaves
 	(

net/bridge.sh

@@ -16,12 +16,15 @@ _is_bridge()
 
 bridge_pre_start()
 {
-	local ports= brif= iface="${IFACE}" e= x=
+	local brif= iface="${IFACE}" e= x=
 	local ports="$(_get_array "bridge_${IFVAR}")"
 	local opts="$(_get_array "brctl_${IFVAR}")"
 	
 	eval brif=\$bridge_add_${IFVAR}
-	[ -z "${ports}" -a -z "${brif}" -a -z "${opts}" ] && return 0
+	eval x=\${bridge_${IFVAR}-y\}
+	if [ -z "${brif}" -a -z "${opts}" ]; then
+		[ -n "${ports}" -o "${x}" != "y" ] || return 0
+	fi
 
 	[ -n "${ports}" ] && bridge_post_stop
 

net/dhcpcd.sh

@@ -15,20 +15,42 @@ _config_vars="$_config_vars dhcp dhcpcd"
 
 dhcpcd_start()
 {
-	local args= opt= opts= pidfile="/var/run/dhcpcd-${IFACE}.pid"
-
+	local args= opt= opts= pidfile="/var/run/dhcpcd-${IFACE}.pid" new=true
 	eval args=\$dhcpcd_${IFVAR}
+	[ -z "${args}" ] && args=${dhcpcd}
 
 	# Get our options
 	eval opts=\$dhcp_${IFVAR}
 	[ -z "${opts}" ] && opts=${dhcp}
 
+	case "$(dhcpcd --version)" in
+		"dhcpcd "[123]*) new=false;;
+	esac
+
 	# Map some generic options to dhcpcd
 	for opt in ${opts}; do
 		case "${opt}" in
-			nodns) args="${args} -R";;
-			nontp) args="${args} -N";;
-			nonis) args="${args} -Y";;
+			nodns)
+				if ${new}; then
+					args="${args} -C resolv.conf"
+				else
+					args="${args} -R"
+				fi
+				;;
+			nontp)
+				if ${new}; then
+					args="${args} -C ntp.conf"
+				else
+					args="${args} -N"
+				fi
+				;;
+			nonis)
+				if ${new}; then
+					args="${args} -C yp.conf"
+				else
+					args="${args} -Y"
+				fi
+				;;
 			nogateway) args="${args} -G";;
 			nosendhost) args="${args} -h ''";
 		esac

net/ifconfig.sh.BSD.in

@@ -151,9 +151,12 @@ _delete_addresses()
 {
 	einfo "Removing addresses"
 	eindent
-	LC_ALL=C ifconfig "${IFACE}" | while read inet address rest; do
+	LC_ALL=C ifconfig "${IFACE}" | while read inet address ali rest; do
 		case "${inet}" in
 			inet|inet6)
+				if [ "${address}" = "alias" ]; then
+					address="${ali}"
+				fi
 				case "${address}" in
 					*"%${IFACE}"|::1) continue;;
 					127.0.0.1) [ "${IFACE}" = "lo0" ] && continue;;

net/ifconfig.sh.Linux.in

@@ -56,7 +56,7 @@ _set_flag()
 _get_mac_address()
 {
 	local mac=$(LC_ALL=C ifconfig "${IFACE}" | \
-	sed -n -e 's/.* HWaddr \(..:..:..:..:..:..\).*/\1/p')
+	sed -n -e 's/.* \(HWaddr\|ether\) \(..:..:..:..:..:..\).*/\2/p')
 
 	case "${mac}" in
 		00:00:00:00:00:00);;
@@ -77,7 +77,7 @@ _set_mac_address()
 _get_inet_address()
 {
 	set -- $(LC_ALL=C ifconfig "${IFACE}" |
-	sed -n -e 's/.*inet addr:\([^ ]*\).*Mask:\([^ ]*\).*/\1 \2/p')
+	sed -n -e 's/.*\(inet addr:\|inet \)\([^ ]*\).*\(Mask:\|netmask \)\([^ ]*\).*/\2 \4/p')
 	[ -z "$1" ] && return 1
 
 	echo -n "$1"
@@ -145,7 +145,7 @@ _add_address()
 	# IPv4 is tricky - ifconfig requires an aliased device
 	# for multiple addresses
 	local iface="${IFACE}"
-	if LC_ALL=C ifconfig "${iface}" | grep -Eq "\<inet addr:.*"; then
+	if LC_ALL=C ifconfig "${iface}" | grep -Eq '\<inet (addr:)?.*'; then
 		# Get the last alias made for the interface and add 1 to it
 		i=$(ifconfig | sed '1!G;h;$!d' | grep -m 1 -o "^${iface}:[0-9]*" \
 			| sed -n -e 's/'"${iface}"'://p')
@@ -234,8 +234,12 @@ _delete_addresses()
 	# Remove IPv6 addresses
 	local addr=
 	for addr in $(LC_ALL=C ifconfig "${IFACE}" | \
-		sed -n -e 's/^.*inet6 addr: \([^ ]*\) Scope:[^L].*/\1/p'); do
-		[ "${addr}" = "::1/128" -a "${IFACE}" = "lo" ] && continue
+		sed -n -e 's/^.*\(inet6 addr:\|inet6\) \([^ ]*\) .*\(Scope:[^L]\|scopeid [^<]*<[^l]\).*/\2/p'); do
+		if [ "${IFACE}" = "lo" ]; then
+			case "${addr}" in
+				"::1/128"|"/128") continue;;
+			esac
+		fi
 		einfo "${addr}"
 		ifconfig "${IFACE}" inet6 del "${addr}"
 	done
@@ -274,7 +278,7 @@ ifconfig_pre_start()
 	metric=1000
 	
 	ebegin "Creating tunnel ${IFVAR}"
-	iptunnel add "${tunnel}"
+	iptunnel add ${tunnel}
 	eend $?
 }
 

net/ifplugd.sh

@@ -31,13 +31,13 @@ ifplugd_pre_start()
 	for f in bond bridge tuntap vlan wireless; do
 		if type "_is_${f}" >/dev/null 2>&1; then
 			if _is_${f}; then
-				veinfo "netplug does not work with" "${f}"
+				veinfo "ifplugd does not work with ${f}"
 				return 0
 			fi
 		fi
 	done
 
-	ebegin "Starting ifplugd on" "${IFACE}"
+	ebegin "Starting ifplugd on ${IFACE}"
 
 	eval args=\$ifplugd_${IFVAR}
 
@@ -47,7 +47,7 @@ ifplugd_pre_start()
 	# Start ifplugd
 	eval start-stop-daemon --start --exec /usr/sbin/ifplugd \
 		--pidfile "${pidfile}" -- "${args}" --iface="${IFACE}"
-	eend "$?" || return 1
+	eend $? || return 1
 
 	eindent
 
@@ -85,7 +85,7 @@ ifplugd_stop()
 	local pidfile="/var/run/ifplugd.${IFACE}.pid"
 	[ ! -e "${pidfile}" ] && return 0
 	
-	ebegin "Stopping ifplugd on" "${IFACE}"
+	ebegin "Stopping ifplugd on ${IFACE}"
 	start-stop-daemon --stop --quiet --exec /usr/sbin/ifplugd \
 		--pidfile "${pidfile}" --signal QUIT
 	eend $?

net/ifwatchd.sh

@@ -54,7 +54,6 @@ ifwatchd_stop()
 	ebegin "Stopping ifwatchd on" "${IFACE}"
 	start-stop-daemon --stop --exec /usr/sbin/ifwatchd \
 		-- -c "${RC_LIBDIR}/sh/ifwatchd-carrier.sh" \
-		-n "${RC_LIBDIR}/sh/ifwatchd-nocarrier.sh" "${IFACE}" \
-		&& return 0
+		-n "${RC_LIBDIR}/sh/ifwatchd-nocarrier.sh" "${IFACE}"
 	eend $?
 }

net/iproute2.sh

@@ -10,12 +10,12 @@ iproute2_depend()
 
 _up()
 {
-	ip link set up dev "${IFACE}"
+	ip link set "${IFACE}" up
 }
 
 _down()
 {
-	ip link set down dev "${IFACE}"
+	ip link set "${IFACE}" down
 }
 
 _exists()
@@ -78,7 +78,7 @@ _get_mac_address()
 
 _set_mac_address()
 {
-	ip link set address "$1" dev "${IFACE}"
+	ip link set "${IFACE}" address "$1"
 }
 
 _get_inet_addresses()
@@ -126,7 +126,7 @@ _add_address()
 			;;
 	esac
 
-	ip addr add dev "${IFACE}" "$@"
+	ip addr add "$@" dev "${IFACE}"
 }
 
 _add_route()
@@ -184,12 +184,12 @@ iproute2_pre_start()
 	# MTU support
 	local mtu=
 	eval mtu=\$mtu_${IFVAR}
-	[ -n "${mtu}" ] && ip link set mtu "${mtu}" dev "${IFACE}"
+	[ -n "${mtu}" ] && ip link set "${IFACE}" mtu "${mtu}"
 
 	# TX Queue Length support
 	local len=
 	eval len=\$txqueuelen_${IFVAR}
-	[ -n "${len}" ] && ip link set txqueuelen "${len}" dev "${IFACE}"
+	[ -n "${len}" ] && ip link set "${IFACE}" txqueuelen "${len}"
 
 	local tunnel=
 	eval tunnel=\$iptunnel_${IFVAR}
@@ -208,6 +208,8 @@ iproute2_pre_start()
 
 _iproute2_ipv6_tentative()
 {
+	# Only check tentative when we have a carrier.
+	LC_ALL=C ip link show dev "${IFACE}" | grep -q "NO-CARRIER" && return 1
 	LC_ALL=C ip addr show dev "${IFACE}" | \
 		grep -q "^[[:space:]]*inet6 .* tentative"
 }

net/iwconfig.sh.BSD.in

@@ -137,7 +137,7 @@ iwconfig_associate()
 	case "${caps}" in
 		[EI]P*)
 		if [ "${key}" = "-" ] ; then
-			ewarn "WEP key is not set for \"${SSID}\"; not connecting"
+			ewarn "WEP key is not set for \"${SSID}\""
 			return 1
 		fi
 		;;
@@ -145,7 +145,7 @@ iwconfig_associate()
 		*)
 		if [ "${key}" != "-" ] ; then
 			key="-"
-			ewarn "\"${SSID}\" is not WEP enabled; ignoring setting"
+			ewarn "\"${SSID}\" is not WEP enabled"
 		fi
 		;;
 	esac
@@ -414,8 +414,9 @@ iwconfig_connect_preferred()
 	[ $# = 0 ] && eval set -- $(_flatten_array "preferred_aps")
 	[ $# = 0 ] && return 1
 
-	local ssid= i=0 mode= mac= caps= freq= chan=
+	local ssid= i= mode= mac= caps= freq= chan=
 	for ssid; do
+		i=0
 		while [ ${i} -le ${APS} ]  ; do
 			eval e=\$SSID_${i}
 			if [ "${e}" = "${ssid}" ] ; then
@@ -484,7 +485,7 @@ iwconfig_defaults()
 
 iwconfig_configure()
 {
-	local x APS
+	local x= APS=-1
 	eval SSID=\$ssid_${IFVAR}
 
 	# Setup ad-hoc mode?

net/iwconfig.sh.Linux.in

@@ -206,9 +206,13 @@ iwconfig_wait_for_association()
 		# Use sysfs if we can
 		if [ -e /sys/class/net/"${IFACE}"/carrier ]; then
 			if [ "$(cat /sys/class/net/"${IFACE}"/carrier)" = "1" ]; then
-				# Double check we have an ssid. This is mainly for buggy
-				# prism54 drivers that always set their carrier on :/
-				[ -n "$(iwgetid --raw "${IFACE}")" ] && return 0
+				# Double check we have an ssid and a non-zero
+				# mac address.  This is mainly for buggy
+				# prism54 drivers that always set their
+				# carrier on or buggy madwifi drivers that
+				# sometimes have carrier on and ssid set
+				# without being associated.  :/
+				[ -n "$(iwgetid --raw "${IFACE}")" ] && [ "$(iwgetid --ap --raw "${IFACE}")" != "00:00:00:00:00:00" ] && return 0
 			fi
 		else
 			local atest=
@@ -246,12 +250,12 @@ iwconfig_associate()
 		SSIDVAR=$(shell_var "${SSID}")
 		key="$(iwconfig_get_wep_key "${mac}")"
 		if [ "${wep_required}" = "on" -a "${key}" = "off" ]; then
-			ewarn "WEP key is not set for \"${SSID}\" - not connecting"
+			ewarn "WEP key is not set for \"${SSID}\""
 			return 1
 		fi
 		if [ "${wep_required}" = "off" -a "${key}" != "off" ]; then
 			key="off"
-			ewarn "\"${SSID}\" is not WEP enabled - ignoring setting"
+			ewarn "\"${SSID}\" is not WEP enabled"
 		fi
 
 		if ! eval iwconfig "${IFACE}" key "${key}"; then
@@ -429,7 +433,7 @@ iwconfig_scan()
 		[ -z "${a}" ] && break
 		eval b=\$QUALITY_${k}
 		if [ -n "${b}" -a "${a}" -lt "${b}" ]; then
-		    for x in MAC SSID CHAN QUALITY ENC; do
+		    for x in MAC SSID MODE CHAN QUALITY ENC; do
 			eval t=\$${x}_${i}
 			eval ${x}_${i}=\$${x}_${k}
 			eval ${x}_${k}=\$t
@@ -453,7 +457,7 @@ iwconfig_scan()
 				local u=${k}
 				# We need to split this into two tests, otherwise bash errors 
 				[ -n "${a}" -a -n "${b}" ] && [ "${a}" -lt "${b}" ] && u=${i}
-				unset MAC_${u} SSID_${u} CHAN_${u} QUALITY_${u} ENC_${u}
+				unset MAC_${u} SSID_${u} MODE_${u} CHAN_${u} QUALITY_${u} ENC_${u}
 			fi
 			k=$((${k} + 1))
 		done
@@ -499,7 +503,7 @@ iwconfig_scan()
 		for x; do
 			if [ "${x}" = "${s}" ]; then
 				ewarn "${s} has been blacklisted - not connecting"
-				unset SSID_${i} MAC_${i} CHAN_${i} QUALITY_${i} ENC_${i}
+				unset SSID_${i} MAC_${i} ${MODE}_${i} CHAN_${i} QUALITY_${i} ENC_${i}
 			fi
 		done
 		i=$((${i} + 1))
@@ -525,7 +529,7 @@ iwconfig_force_preferred()
 			i=$((${i} + 1))
 		done
 		if ! ${found_AP}; then
-			SSID=${e}
+			SSID=${ssid}
 			iwconfig_associate && return 0
 		fi
 	done
@@ -597,10 +601,8 @@ iwconfig_connect_not_preferred()
 
 iwconfig_defaults()
 {
-	local x=
-	for x in txpower rate rts frag; do
-	    iwconfig "${IFACE}" "${x}" auto 2>/dev/null
-	done
+	# Turn on the radio
+	iwconfig "${IFACE}" txpower on 2>/dev/null
 
 	# Release the AP forced
 	# Must do ap and then ssid otherwise scanning borks
@@ -610,7 +612,7 @@ iwconfig_defaults()
 
 iwconfig_configure()
 {
-	local x= APS=
+	local x= APS=-1
 	eval SSID=\$ssid_${IFVAR}
 
 	# Support old variable
@@ -735,7 +737,7 @@ iwconfig_pre_start()
 	# which reports NOT READY!
 	x="$(iwconfig_get_type)"
 	if [ "${x}" = "NOT READY!" ]; then
-		eerror "Looks like there was a probem loading the firmware for ${IFACE}"
+		eerror "Looks like there was a problem loading the firmware for ${IFACE}"
 		return 1
 	fi
 

net/system.sh

@@ -58,8 +58,8 @@ _system_ntp()
 	local servers= buffer= x=
 
 	eval servers=\$ntp_servers_${IFVAR}
-	[ -z ${servers} ] && servers=${ntp_servers}
-	[ -z ${servers} ] && return 0
+	[ -z "${servers}" ] && servers=${ntp_servers}
+	[ -z "${servers}" ] && return 0
 
 	buffer="# Generated by net-scripts for interface ${IFACE}\n"
 	buffer="${buffer}restrict default noquery notrust nomodify\n"