Release openrc-0.5.3

Fixes Gentoo #294312

.gitignore

@@ -1,3 +1 @@
-openrc-0.1.tar.bz2
-.gdb_history
-.gdbinit
+*.bz2

Makefile

@@ -1,12 +1,27 @@
 # OpenRC Makefile
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
-NAME=		openrc
-VERSION=	0.3.0
-PKG=		${NAME}-${VERSION}
+include Makefile.inc
+
+SUBDIR=		conf.d etc init.d man sh src
+
+# Build our old net foo or not
+_OLDNET_SH=	case "${MKOLDNET}" in \
+		[Yy][Ee][Ss]) echo "net doc";; \
+		*) echo "";; \
+		esac
+_OLDNET!=	${_OLDNET_SH}
+SUBDIR+=	${_OLDNET}$(shell ${_OLDNET_SH})
+
+# Build pkgconfig or not
+_PKGCONFIG_SH=	case "${MKPKGCONFIG}" in \
+		[Yy][Ee][Ss]|"") echo "pkgconfig";; \
+		*) echo "";; \
+		esac
+_PKGCONFIG!=	${_PKGCONFIG_SH}
+SUBDIR+=	${_PKGCONFIG}$(shell ${_PKGCONFIG_SH})
 
-SUBDIR=		conf.d doc etc init.d man net sh src
 # We need to ensure that runlevels is done last
 SUBDIR+=	runlevels
 
@@ -17,8 +32,9 @@ include ${MK}/sys.mk
 include ${MK}/os.mk
 include ${MK}/subdir.mk
 include ${MK}/dist.mk
-include ${MK}/gitignore.mk
+include ${MK}/git.mk
 
 _installafter:
-	${INSTALL} -d ${DESTDIR}/${PREFIX}/${RC_LIB}/init.d
-	${INSTALL} -d ${DESTDIR}/${PREFIX}/${RC_LIB}/tmp
+	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/init.d
+	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/tmp
+	${ECHO} "${VERSION}${GITVER}" > ${DESTDIR}/${LIBEXECDIR}/version

Makefile.inc

@@ -0,0 +1,3 @@
+NAME=		openrc
+VERSION=	0.5.3
+PKG=		${NAME}-${VERSION}

README

@@ -11,14 +11,18 @@ PROGLDFLAGS=-static
 LIBNAME=lib64
 DESTDIR=/tmp/openrc-image
 MKPAM=pam
+MKPKGCONFIG=no
 MKTERMCAP=ncurses
 MKTERMCAP=termcap
+MKOLDNET=yes
 PKG_PREFIX=/usr/pkg
 LOCAL_PREFIX=/usr/local
 PREFIX=/usr/local
 
 We don't support building a static OpenRC with PAM.
 You may need to use PROGLDFLAGS=-Wl,-Bstatic on glibc instead of just -static.
+If you debug memory under valgrind, add -DDEBUG_MEMORY to your CPPFLAGS
+so that all malloc memory should be freed at exit.
 
 You can also brand OpenRC if you so wish like so
 BRANDING=\"Gentoo/$(uname -s)\"

README.net

@@ -0,0 +1,36 @@
+OpenRC Network Ideals
+---------------------
+
+The new style networking for OpenRC is very simplistic - provide a basic means
+of configuring static interface address and routes whilst allowing the
+possibility to run any command at any point.
+
+In a nutshell, init.d/network is a wrapper around ifconfig(8) and
+init.d/staticroute is wrapper around route(8).
+
+In the Perfect World (TM) ifconfig should be able to configure everything
+about the interface easily * . The BSD family almost get this right and Linux
+epically fails.
+
+* Only static confguration, including link setup.
+For dynmaic, static, IPv4LL, arping and per ssid IPv4 setup dhcpcd-5.x
+provides your needs.
+
+It fails because there are many tools to do the same job and often have
+vastly different syntax where they could be similar. In other words, there
+is no coherence.
+
+OpenRC-0.4.x and older (inc Gentoo baselayout-1) had a collection of scripts
+for each tool and allowed a script per interface. Over the years, this design
+has proven very hard to maintain as each user has their own idea of how
+things should work. Also, there were (and still are) race conditions.
+
+So where do we go from here?
+Well, it's possible to use the new network scripts using the tools
+currently available. It's just harder as you have to know them and their
+documentation can be lacking at times.
+The correct end goal is a BSD style ifconfig tool.
+I've started work on it, but the project has stalled somewhat.
+It's display only right now and the source is not yet publically available.
+If you have the skills and share the vision then contact me privately and
+we'll take it from there.

conf.d/.gitignore

@@ -0,0 +1,2 @@
+network
+staticroute

conf.d/Makefile

@@ -1,7 +1,19 @@
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname local localmount net urandom
+CONF=	bootmisc fsck hostname local localmount network staticroute urandom
+
+TARGETS+=	network staticroute
+CLEANFILES+=	network staticroute
 
 MK=	../mk
 include ${MK}/os.mk
 include Makefile.${OS}
 include ${MK}/scripts.mk
+
+SOS?=	BSD
+
+network: network.in network.${OS}
+	cp $@.in $@
+	[ -e $@.${OS} ] && cat $@.${OS} >> $@ || true
+
+staticroute: staticroute.${SOS}
+	cp $@.${SOS} $@

conf.d/Makefile.FreeBSD

@@ -1 +1,3 @@
 CONF+=	ipfw moused powerd rarpd savecore syscons
+
+network.${OS}:

conf.d/Makefile.Linux

@@ -1 +1,2 @@
-CONF+=	consolefont hwclock keymaps modules
+CONF+=	consolefont dmesg hwclock keymaps modules
+SOS=	Linux

conf.d/Makefile.NetBSD

@@ -1 +1,3 @@
 CONF+=	moused rarpd savecore
+
+network.${OS}:

conf.d/bootmisc

@@ -1,5 +1,5 @@
 # List of /tmp directories we should clean up
-wipe_tmp_dirs="/tmp"
+clean_tmp_dirs="/tmp"
 
 # Should we wipe the tmp paths completely or just selectively remove known
 # locks / files / etc... ?

conf.d/dmesg

@@ -0,0 +1,3 @@
+# Sets the level at which logging of messages is done to the
+# console.  See dmesg(8) for more info.
+dmesg_level="1"

conf.d/fsck

@@ -13,6 +13,11 @@
 #fsck_passno=">1"
 #fsck_passno="<2"
 
+# Most modern fs's don't require a full fsck on boot, but for those that do
+# it may be adivisable to skip this when running on battery.
+# WARNING: Do not turn this off if you have any JFS partitions.
+fsck_on_battery="YES"
+
 # fsck_shutdown causes fsck to trigger during shutdown as well as startup.
 # The end result of this is that if any periodic non-root filesystem checks are
 # scheduled, under normal circumstances the actual check will happen during

conf.d/hwclock

@@ -1,11 +1,11 @@
-# Set CLOCK to "UTC" if your system clock is set to UTC (also known as
-# Greenwich Mean Time).  If your clock is set to the local time, then 
+# Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
+# Greenwich Mean Time).  If that clock is set to the local time, then 
 # set CLOCK to "local".  Note that if you dual boot with Windows, then 
 # you should set it to "local".
 clock="UTC"
 
 # If you want to set the Hardware Clock to the current System Time 
-# during shutdown, then say "YES" here.
+# (software clock) during shutdown, then say "YES" here.
 # You normally don't need to do this if you run a ntp daemon.
 clock_systohc="NO"
 

conf.d/network.Linux

@@ -0,0 +1,34 @@
+# ifconfig under Linux is not that powerful and doesn't easily handle
+# multiple addresses
+# On the other hand, ip (iproute2) is quite powerful and is also supported
+#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
+
+# ip doesn't handle MTU like ifconfig, but we can do it like so
+#ifup_eth0="ip link set \$int mtu 1500"
+
+# Create a bonded interface
+#interfaces="bond0"
+#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
+#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
+#ifdown_bond0="rmmod bonding"
+
+# Create tap interface and a bridge interface.
+# We add the tap to the bridge.
+# An external program, like dhcpcd, will configure the IP on the bridge
+#interfaces="tun0 br0"
+#ifup_tun0="tunctl -t \$int"
+#ifdown_tun0="tunctl -d \$int"
+#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
+#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
+
+# Create VLAN
+#interfaces="eth0_2 eth0_3 eth0_4"
+#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
+#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
+#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
+#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
+#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
+
+# Normally you would use wpa_supplicant to configure wireless, but you can
+# use iwconfig also
+#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

conf.d/network.in

@@ -0,0 +1,30 @@
+# Assign static IP addresses and run custom scripts per interface.
+# Seperate commands with ;
+# Prefix with ! to run a shell script.
+# Use \$int to represent the interface
+#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
+
+# You also have ifup_eth0 and ifdown_eth0 to run other commands when
+# eth0 is started and stopped.
+# You should note that we don't stop the network at system shutdown by default.
+# If you really need this, then set shutdown_network=YES
+
+# You can assign a default route
+#defaultroute="192.168.0.1"
+# Lastly, the interfaces variable pulls in virtual interfaces that cannot
+# be automatically detected.
+#interfaces="br0 bond0 vlan0"
+
+# You can also use files instead of variables here if you like:
+# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0
+# /etc/ip.eth0 is equivalent to ifconfig_eth0
+# /etc/ifup.eth0 is equivalent to ifup_eth0
+# /etc/ifdown.eth0 is equivalent to ifdown_eth0
+# Any files found will automatically be put into the interfaces variable.
+# You don't need to escape variables in files, so use $int instead of \$int.
+
+# If you require DHCP, you should install dhcpcd and it to the boot or
+# default runlevel.
+
+# NIS users can set the domain name here
+#domainname="foobar"

conf.d/staticroute.BSD

@@ -0,0 +1,2 @@
+# Example static route. See route(8) for syntax.
+staticroute="net 192.168.0.0 -netmask 255.255.0.0 10.73.1.1"

conf.d/staticroute.Linux

@@ -0,0 +1,2 @@
+# Example static route. See route(8) for syntax.
+staticroute="net 192.168.0.0 netmask 255.255.0.0 gw 10.73.1.1"

doc/net.example.Linux.in

@@ -992,7 +992,7 @@
 #	#	'from 24.80.102.112/32 to 192.168.1.0/24 table localnet priority 100' \
 #	#	'from 216.113.223.51/32 to 192.168.1.0/24 table localnet priority 100' \
 #	#"
-#	eval set -- $\rules_${IFVAR}
+#	eval set -- \$rules_${IFVAR}
 #	if [ $# != 0 ]; then
 #		einfo "Adding IP policy routing rules"
 #		eindent
@@ -1003,7 +1003,7 @@
 #		else
 #			for x; do
 #				ebegin "${x}"
-#				ip rule add ${x} dev "${IFACE}"
+#				ip rule add ${x}
 #				eend $?
 #			done
 #		fi

etc/Makefile

@@ -1,6 +1,8 @@
 DIR=	${SYSCONFDIR}
 CONF=	rc.conf
 
+CLEANFILES+=	rc.conf
+
 MK=	../mk
 include ${MK}/os.mk
 include Makefile.${OS}

etc/rc.conf.Linux

@@ -6,20 +6,3 @@
 # consolefont, numlock, etc ...)
 rc_tty_number=12
 
-# Use this variable to control the /dev management behavior.
-#  devfs  - use devfs (requires sys-fs/devfsd)
-#  mdev   - use mdev (requires sys-apps/busybox)
-#  udev   - use udev (requires sys-fs/udev)
-#  static - let the user manage /dev (YOU need to create ALL device nodes)
-# Leave it blank to let rc work it out (udev, mdev, devfs, static)
-#rc_devices=""
-
-# UDEV OPTION:
-# Set to "yes" if you want to save /dev to a tarball on shutdown
-# and restore it on startup.  This is useful if you have a lot of
-# custom device nodes that udev does not handle/know about.
-rc_device_tarball="NO"
-
-# Sets the level at which logging of messages is done to the
-# console.  See dmesg(8) for more info.
-dmesg_level="1"

etc/rc.conf.in

@@ -7,12 +7,18 @@
 # WARNING: whilst we have improved parallel, it can still potentially lock
 # the boot process. Don't file bugs about this unless you can supply
 # patches that fix it without breaking other things!
-rc_parallel="NO"
+#rc_parallel="NO"
 
 # Set rc_interactive to "YES" and you'll be able to press the I key during
 # boot so you can choose to start specific services. Set to "NO" to disable
 # this feature.
-rc_interactive="YES"
+#rc_interactive="YES"
+
+# If we need to drop to a shell, you can specify it here.
+# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
+# otherwise /bin/sh
+# Linux users could specify /sbin/sulogin
+#rc_shell=/bin/sh
 
 # Do we allow any started service in the runlevel to satisfy the depedency
 # or do we want all of them regardless of state? For example, if net.eth0
@@ -20,37 +26,29 @@ rc_interactive="YES"
 # both will be started, but services that depend on 'net' will work if either
 # one comes up. With rc_depend_strict="YES" we would require them both to
 # come up.
-rc_depend_strict="YES"
+#rc_depend_strict="YES"
 
-# Do we allow services to be hotplugged? If not, set to rc_hotplug="NO"
-# NOTE: This does not affect anything hotplug/udev/devd related, just the
-# starting/stopping of the init.d service triggered by it.
-rc_hotplug="YES"
-
-# Dynamic /dev managers can trigger coldplug events which cause services to
-# start before we are ready for them. If this happens, we can defer these
-# services to start in the boot runlevel. Set rc_coldplug="NO" if you don't
-# want this.
-# NOTE: This also affects module coldplugging in udev-096 and higher
-# If you want module coldplugging but not coldplugging of services then you
-# can set rc_coldplug="YES" and rc_plug_services="!*"
-rc_coldplug="YES"
-
-# Some people want a finer grain over hotplug/coldplug. rc_plug_services is a
-# list of services that are matched in order, either allowing or not. By
-# default we allow services through as rc_coldplug/rc_hotplug has to be YES
-# anyway.
-# Example - rc_plug_services="net.wlan !net.*"
+# rc_hotplug is a list of services that we allow to be hotplugged.
+# By default we do not allow hotplugging.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# This service is intrinsically included in the boot runlevel.
+# To disable services, prefix with a !
+# Example - rc_hotplug="net.wlan !net.*"
 # This allows net.wlan and any service not matching net.* to be plugged.
-rc_plug_services=""
+# Example - rc_hotplug="*"
+# This allows all services to be hotplugged
+#rc_hotplug="*"
 
 # rc_logger launches a logging daemon to log the entire rc process to
 # /var/log/rc.log
-rc_logger="NO"
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+#rc_logger="YES"
 
 # By default we filter the environment for our running scripts. To allow other
 # variables through, add them here. Use a * to allow all variables through.
-# rc_env_allow="VAR1 VAR2"
+#rc_env_allow="VAR1 VAR2"
 
 # By default we assume that all daemons will start correctly.
 # However, some do not - a classic example is that they fork and return 0 AND
@@ -58,17 +56,27 @@ rc_logger="NO"
 # child crashes. You can set the number of milliseconds start-stop-daemon
 # waits to check that the daemon is still running after starting here.
 # The default is 0 - no checking.
-# rc_start_wait=100
+#rc_start_wait=100
+
+# rc_nostop is a list of services which will not stop when changing runlevels.
+# This still allows the service itself to be stopped when called directly.
+#rc_nostop=""
+
+# rc will attempt to start crashed services by default.
+# However, it will not stop them by default as that could bring down other
+# critical services.
+#rc_crashed_stop=NO
+#rc_crashed_start=YES
 
 ##############################################################################
 # MISC CONFIGURATION VARIABLES
 # There variables are shared between many init scripts
 
 # Set unicode to YES to turn on unicode support for keyboards and screens.
-unicode="NO"
+#unicode="NO"
 
 # Network fstypes. Below is the default.
-net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
+net_fs_list="afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs nfs nfs4 ocfs2 shfs smbfs"
 
 ##############################################################################
 # SERVICE CONFIGURATION VARIABLES

etc/rc.devd

@@ -1,5 +1,5 @@
 #!/bin/sh
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 # Inform RC that we are in the background and hotplugged

etc/rc.in

@@ -1,5 +1,5 @@
 #!@SHELL@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 # If $TERM is not set then assume default of @TERM@
@@ -10,12 +10,9 @@
 trap : SIGINT
 trap "echo 'Boot interrupted'; exit 1" SIGQUIT
 
-# BSD's init works somewhat differently to sysvinit.
-# This block should 'translate' from the way init calls it to the way it would
-# be called by sysvinit on linux.
-RUNLEVEL="1" /sbin/rc sysinit || exit 1
-RUNLEVEL="1" /sbin/rc boot || exit 1
-PREVLEVEL="1" /sbin/rc default
+/sbin/rc sysinit || exit 1
+/sbin/rc boot || exit 1
+/sbin/rc default
 
 # We don't actually care if rc default worked or not, we should exit 0
 # to allow logins

etc/rc.shutdown.in

@@ -1,5 +1,5 @@
 #!@SHELL@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 # Handle interrupts 
@@ -14,13 +14,4 @@ export LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}"
 [ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@"
 
 action=${1:-shutdown}
-
-# BSD's init works somewhat differently to sysvinit.
-# This block should 'translate' from the way init calls it to the way it would
-# be called by sysvinit on linux.
-case "${action}" in
-	reboot) 	export RUNLEVEL=6;;
-	single)		export RUNLEVEL=S;;
-	*)		export RUNLEVEL=0;;
-esac
 exec /sbin/rc "${action}"

init.d.misc/.gitignore

@@ -1,5 +1,6 @@
 avahi-dnsconfd
 avahid
+dhcpcd
 dbus
 hald
 named
@@ -7,3 +8,4 @@ ntpd
 openvpn
 polkitd
 sshd
+wpa_supplicant

init.d.misc/Makefile

@@ -1,6 +1,7 @@
 DIR=	${INITDIR}
-SRCS=	avahi-dnsconfd.in avahid.in dbus.in hald.in named.in ntpd.in \
-	openvpn.in polkitd.in sshd.in
+SRCS=	avahi-dnsconfd.in avahid.in dhcpcd.in dbus.in \
+	hald.in named.in ntpd.in \
+	openvpn.in polkitd.in sshd.in wpa_supplicant.in
 
 MK=	../mk
 

init.d.misc/Makefile.FreeBSD

@@ -1 +1 @@
-PREFIX?=	/usr/local
+PKG_PREFIX?=	/usr/local

init.d.misc/Makefile.Linux

@@ -1 +1 @@
-PREFIX=/usr
+PKG_PREFIX?=/usr

init.d.misc/Makefile.NetBSD

@@ -1 +1 @@
-PREFIX?=	/usr/pkg
+PKG_PREFIX?=	/usr/pkg

init.d.misc/avahi-dnsconfd.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/avahi-dnsconfd
-command_args="${avahi_dnsconfd_args} -D"
+command_args="$avahi_dnsconfd_args -D"
 pidfile=@VARBASE@/run/avahi-dnsconfd.pid
 name="Avahi DNS Configuration Daemon"
 

init.d.misc/avahid.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/avahi-daemon
-command_args="${avahid_args} -D"
+command_args="$avahid_args -D"
 pidfile=@VARBASE@/run/avahi-daemon/pid
 name="Avahi Service Advertisement Daemon"
 

init.d.misc/dbus.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/bin/dbus-daemon

init.d.misc/dhcpcd.in

@@ -0,0 +1,27 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+command=/sbin/dhcpcd
+pidfile=/var/run/dhcpcd.pid
+command_args=-q
+name="DHCP Client Daemon"
+
+depend()
+{
+	provide net
+	need localmount
+	use logger
+	after bootmisc modules
+	before dns
+}
+
+stop_pre()
+{
+	# When shutting down, kill dhcpcd but preserve network
+	# We do this as /var/run/dhcpcd could be cleaned out when we
+	# return to multiuser.
+	if yesno $RC_GOINGDOWN; then
+		: ${stopsig:=SIGKILL}
+	fi
+}

init.d.misc/dnsmasq.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/dnsmasq
-command_args=${dnsmasq_args}
+command_args=$dnsmasq_args
 pidfile=@VARBASE@/run/dnsmasq.pid
 required_files=/etc/dnsmasq.conf
 
@@ -18,7 +18,7 @@ depend()
 
 reload()
 {
-	ebegin "Reloading ${RC_SVCNAME}"
-	start-stop-daemon --signal SIGHUP --pidfile "${pidfile}"
+	ebegin "Reloading $RC_SVCNAME"
+	start-stop-daemon --signal SIGHUP --pidfile "$pidfile"
 	eend $?
 }

init.d.misc/hald.in

@@ -1,10 +1,10 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/hald
 pidfile=@VARBASE@/run/hald/hald.pid
-command_args="${hald_args}"
+command_args=$hald_args
 name="Hardware Abstraction Layer Daemon"
 
 depend()

init.d.misc/named.in

@@ -1,16 +1,16 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/named
-command_args=${named_args}
+command_args=$named_args
 pidfile=@VARBASE@/run/named.pid
 name="Domain Name server"
 extra_started_commands="reload"
 
 namedb=/etc/namedb
 uid=named
-case "${RC_UNAME}" in
+case "$RC_UNAME" in
 	FreeBSD)
 		uid=bind
 		pidfile=@VARBASE@/run/named/pid
@@ -19,7 +19,7 @@ case "${RC_UNAME}" in
 		uid=bind
 		;;
 esac
-named_uid=${named_uid:-${uid}}
+: ${named_uid:=${uid}}
 
 depend()
 {
@@ -30,68 +30,71 @@ depend()
 
 start_pre()
 {
-	if [ -n "${named_chroot}" ]; then
+	if [ -n "$named_chroot" ]; then
 		# Create (or update) the chroot directory structure
 		if [ -r /etc/mtree/BIND.chroot.dist ]; then
-			mtree -deU -f /etc/mtree/BIND.chroot.dist -p "${named_chroot}"
+			mtree -deU -f /etc/mtree/BIND.chroot.dist -p "$named_chroot"
 		else
 			ewarn "/etc/mtree/BIND.chroot.dist missing,"
 			ewarn "chroot directory structure not updated"
 		fi
 
-		if [ ! -d "${named_chroot}"/. ]; then
-			eerror "chroot directory ${named_chroot} missing"
+		if [ ! -d "$named_chroot"/. ]; then
+			eerror "chroot directory $named_chroot missing"
 			exit 1
 		fi
 
 		# Create /etc/namedb symlink
-		if [ ! -L "${namedb}" ]; then
-			if [ -d "${namedb}" ]; then
-				ewarn "named chroot: ${namedb} is a directory!"
-			elif [ -e "${namedb}" ]; then
-				ewarn "named chroot: ${namedb} exists!"
+		if [ ! -L "$namedb" ]; then
+			if [ -d "$namedb" ]; then
+				ewarn "named chroot: $namedb is a directory!"
+			elif [ -e "$namedb" ]; then
+				ewarn "named chroot: $namedb exists!"
 			else
-				ln -s "${named_chroot}${namedb}" "${namedb}"
+				ln -s "$named_chroot$namedb" "$namedb"
 			fi
 		else
 			# Make sure it points to the right place.
-			ln -shf "${named_chroot}${namedb}" "${namedb}"
+			ln -shf "$named_chroot$namedb" "$namedb"
 		fi
 
-		case "${RC_UNAME}" in
+		case "$RC_UNAME" in
 			*BSD|DragonFly)
 				# Mount a devfs in the chroot directory if needed
-				umount "${named_chroot}"/dev 2>/dev/null
-				mount -t devfs dev "${named_chroot}"/dev
-				devfs -m "${named_chroot}"/dev ruleset devfsrules_hide_all
-				devfs -m "${named_chroot}"/dev rule apply path null unhide
-				devfs -m "${named_chroot}"/dev rule apply path random unhide
+				umount "$named_chroot"/dev 2>/dev/null
+				mount -t devfs dev "$named_chroot"/dev
+				devfs -m "$named_chroot"/dev \
+					ruleset devfsrules_hide_all
+				devfs -m "$named_chroot"/dev \
+					rule apply path null unhide
+				devfs -m "$named_chroot"/dev \
+					rule apply path random unhide
 				;;
 		esac
 
 		# Copy local timezone information if it is not up to date.
 		if [ -r /etc/localtime ]; then
-			cmp -s /etc/localtime "${named_chroot}/etc/localtime" ||
-			cp -p /etc/localtime "${named_chroot}/etc/localtime"
+			cmp -s /etc/localtime "$named_chroot/etc/localtime" ||
+			cp -p /etc/localtime "$named_chroot/etc/localtime"
 		fi
 
-		command_args="${command_args} -t ${named_chroot}"
+		command_args="$command_args -t $named_chroot"
 
-		ln -fs "${named_chroot}${pidfile}" "${pidfile}"
+		ln -fs "$named_chroot$pidfile" "$pidfile"
 	fi
 
-	if [ ! -s "${named_chroot}${namedb}/rndc.conf" ]; then
-		local confgen="${command%/named}/rndc-confgen -a -b256 -u ${named_uid} \
-			-c ${named_chrootdir}/etc/namedb/rndc.key"
-		if [ -s "${named_chroot}${namedb}/rndc.key" ]; then
+	if [ ! -s "$named_chroot$namedb/rndc.conf" ]; then
+		local confgen="${command%/named}/rndc-confgen -a -b256 -u $named_uid \
+			-c $named_chrootdir/etc/namedb/rndc.key"
+		if [ -s "$named_chroot$namedb/rndc.key" ]; then
 			local getuser="stat -f%Su"
-			[ "${RC_UNAME}" = "Linux" ] && getuser="stat -c%U"
-			case $(${getuser} "${named_chroot}${namedb}"/rndc.key) in
-				root|"${named_uid}");;
-				*) ${confgen};;
+			[ "$RC_UNAME" = Linux ] && getuser="stat -c%U"
+			case $(${getuser} "$named_chroot$namedb"/rndc.key) in
+				root|"$named_uid");;
+				*) $confgen;;
 			esac
 		else
-			${confgen}
+			$confgen
 		fi
 	fi
 }
@@ -103,7 +106,7 @@ reload()
 
 stop_post()
 {
-	if [ -n "${named_chroot}" -a -c "${named_chroot}"/dev/null ]; then
-		umount "${named_chroot}"/dev 2>/dev/null || true
+	if [ -n "$named_chroot" -a -c "$named_chroot"/dev/null ]; then
+		umount "$named_chroot"/dev 2>/dev/null || true
 	fi
 }

init.d.misc/ntpd.in

@@ -1,13 +1,14 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
-ntpd_config=${ntpd_config:-/etc/ntp.conf}
-ntpd_drift=${ntpd_drift:-/var/db/ntpd.drift}
+: ${ntpd_config:=/etc/ntp.conf}
+: ${ntpd_drift:=/var/db/ntpd.drift}
 
 command=/usr/sbin/ntpd
+required_files=$ntpd_config
 pidfile=/var/run/ntpd.pid
-command_args="${ntpd_args} -c ${ntpd_config} -f ${ntpd_drift} -p ${pidfile}"
+command_args="$ntpd_args -c $ntpd_config -f $ntpd_drift -p $pidfile"
 name="Network Time Protocol Daemon"
 
 depend()
@@ -19,22 +20,18 @@ depend()
 
 start_pre()
 {
-	if [ ! -r "${ntpd_config}" ]; then
-		eerror "${ntpd_config} is not readable"
-		return 1
-	fi
-
-	if [ -n "${ntpd_chroot}" ]; then
-		case "${RC_UNAME}" in
+	if [ -n "$ntpd_chroot" ]; then
+		case "$RC_UNAME" in
 			*BSD|DragonFly)
-				if [ ! -c "${ntpd_chroot}/dev/clockctl" ]; then
-					rm -f "${ntpd_chroot}/dev/clockctl"
-					(cd /dev; /bin/pax -rw -pe clockctl "${ntpd_chroot}/dev")
+				if [ ! -c "$ntpd_chroot/dev/clockctl" ]; then
+					rm -f "$ntpd_chroot/dev/clockctl"
+					(cd /dev; /bin/pax -rw -pe clockctl \
+					 "$ntpd_chroot/dev")
 				fi
 				;;
 		esac
-		ln -fs "${ntpd_chroot}${ntpd_drift}" "${ntpd_drift}"
+		ln -fs "$ntpd_chroot$ntpd_drift" "$ntpd_drift"
 
-		command_args="${command_args} -u ntpd:ntpd -i ${ntpd_chroot}"
+		command_args="$command_args -u ntpd:ntpd -i $ntpd_chroot"
 	fi
 }

init.d.misc/openvpn.in

@@ -1,31 +1,32 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 vpn=${RC_SVCNAME#*.}
 name="OpenVPN"
-[ "${vpn}" != "openvpn" ] && name="${name} (${vpn})"
+[ "$vpn" != openvpn ] && name="$name ($vpn)"
 command=@PKG_PREFIX@/sbin/openvpn
 
-pidfile=@VARBASE@/run/"${RC_SVCNAME}".pid
-openvpn_dir=${openvpn_dir:-@PKG_PREFIX@/etc/openvpn}
-openvpn_config=${openvpn_config:-${openvpn_dir}/${vpn}.conf}
-command_args="${openvpn_args} --daemon --config ${openvpn_config} --writepid ${pidfile}"
-required_dirs="${openvpn_dir}"
-required_files="${openvpn_config}"
+pidfile=@VARBASE@/run/"$RC_SVCNAME".pid
+: ${openvpn_dir:=@PKG_PREFIX@/etc/openvpn}
+: ${openvpn_config:=$openvpn_dir/$vpn.conf}
+command_args="$openvpn_args --daemon --config $openvpn_config"
+command_args="$command_args --writepid $pidfile"
+required_dirs=$openvpn_dir
+required_files=$openvpn_config
 
 # If we're an openvpn client, then supply a nice default config
 # You can find sample up/down scripts in the OpenRC support/openvpn dir
-if yesno "${openvpn_client}"; then
-	openvpn_up=${openvpn_up:-${openvpn_dir}/up.sh}
-	openvpn_down=${openvpn_down:-${openvpn_dir}/down.sh}
-	command_args="${command_args} --nobind --up-delay --up-restart --down-pre"
-	command_args="${command_args} --up ${openvpn_up}"
-	command_args="${command_args} --down ${openvpn_down}"
-	required_files="${required_files} ${openvpn_up} ${openvpn_down}"
+if yesno $openvpn_client; then
+	: ${openvpn_up:=${openvpn_dir}/up.sh}
+	: ${openvpn_down:=${openvpn_dir}/down.sh}
+	command_args="$command_args --nobind --up-delay --up-restart --down-pre"
+	command_args="$command_args --up $openvpn_up"
+	command_args="$command_args --down $openvpn_down"
+	required_files="$required_files $openvpn_up $openvpn_down"
 	
 	in_background_fake="start stop"
-	start_inactive="YES"
+	start_inactive=YES
 fi
 
 depend()
@@ -38,7 +39,7 @@ depend()
 start_pre()
 {
 	# Linux has good dynamic tun/tap creation
-	if [ "${RC_UNAME}" = "Linux" ]; then
+	if [ "$RC_UNAME" = Linux ]; then
 		if [ ! -e /dev/net/tun ]; then
 			if ! modprobe tun; then
 				eerror "TUN/TAP support is not available in this kernel"
@@ -60,8 +61,7 @@ start_pre()
 	fi
 	
 	# If the config file does not specify the cd option, we do
-	# But if we specify it, we override the config option which we do not want
-	if ! grep -q "^[ \t]*cd[ \t].*" "${openvpn_config}"; then
-		command_args="${command_args} --cd ${openvpn_dir}"
+	if ! grep -q "^[ \t]*cd[ \t].*" "$openvpn_config"; then
+		command_args="$command_args --cd $openvpn_dir"
 	fi
 }

init.d.misc/polkitd.in

@@ -1,10 +1,10 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/polkitd
 pidfile=@VARBASE@/run/polkitd/polkitd.pid
-command_args="${polkitd_args}"
+command_args="$polkitd_args"
 name="PolicyKit Daemon"
 
 depend()

init.d.misc/sshd.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/sshd
-command_args=${sshd_args}
+command_args=$sshd_args
 pidfile=@VARBASE@/run/sshd.pid
 required_files=/etc/ssh/sshd_config
 
@@ -31,5 +31,5 @@ start_pre()
 		eend $? || return 1
 	fi
 
-	${command} -t	
+	$command -t	
 }

init.d.misc/wpa_supplicant.in

@@ -0,0 +1,70 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+command=/usr/sbin/wpa_supplicant
+: ${wpa_supplicant_conf:=/etc/wpa_supplicant.conf}
+wpa_supplicant_if=${wpa_supplicant_if:+-i}$wpa_supplicant_if
+command_args="$wpa_supplicant_args -B -c$wpa_supplicant_conf $wpa_supplicant_if"
+name="WPA Supplicant Daemon"
+
+depend()
+{
+	need localmount
+	use logger
+	after bootmisc modules
+	before dns dhcpcd net
+	keyword -shutdown
+}
+
+find_wireless()
+{
+	local iface=
+
+	case "$RC_UNAME" in
+	Linux)
+		for iface in /sys/class/net/*; do
+			if [ -e "$iface"/wireless -o \
+				-e "$iface"/phy80211 ]
+			then
+				echo "${iface##*/}"
+				return 0
+			fi
+		done
+		;;
+	*)
+		for iface in /dev/net/* $(ifconfig -l 2>/dev/null); do
+			if ifconfig "${iface##*/}" 2>/dev/null | \
+				grep -q "[ ]*ssid "
+			then
+				echo "${iface##*/}"
+				return 0
+			fi
+		done
+		;;
+	esac
+	
+	return 1
+}
+
+append_wireless()
+{
+	local iface= i=
+
+	iface=$(find_wireless)
+	if [ -n "$iface" ]; then
+		for i in $iface; do
+			command_args="$command_args -i$i"
+		done
+	else
+		eerror "Could not find a wireless interface"
+	fi
+}
+
+start_pre()
+{
+	case " $command_args" in
+	*" -i"*) ;;
+	*) append_wireless;;
+	esac
+}

init.d/.gitignore

@@ -1,41 +1,42 @@
 bootmisc
 fsck
-halt.sh
 hostname
 local
 localmount
+moused
+net.lo
+net.lo0
 netmount
+network
 root
+savecache
 swap
 sysctl
 urandom
+devfs
+dmesg
+hwclock
+consolefont
+keymaps
+killprocs
+modules
+mount-ro
+mtab
+numlock
+procfs
+staticroute
+sysfs
+devdb
 hostid
-moused
 newsyslog
 pf
 rarpd
 rc-enabled
 rpcbind
 savecore
-syslogd
-adjkerntz
-devd
-dumpon
-ipfw
-mixer
-nscd
-powerd
-syscons
-net.lo
-ttys
 swap-blk
-wscons
-consolefont
-hwclock
-keymaps
-modules
-mtab
-numlock
-procfs
+swclock
+syslogd
 termencoding
-devdb
+ttys
+wscons

init.d/Makefile

@@ -1,16 +1,27 @@
 DIR=	${INITDIR}
-SRCS=	bootmisc.in fsck.in halt.sh.in hostname.in local.in localmount.in \
-	netmount.in root.in swap.in sysctl.in urandom.in
+SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
+	network.in root.in savecache.in staticroute.in swap.in swclock.in \
+	sysctl.in urandom.in
 BIN=	${OBJS}
 
-INSTALLAFTER=	_installafter
-CLEANFILES+=	net.lo
-TARGETS+=	net.lo
+# Build our old net foo or not
+_OLDNET_SH=	case "${MKOLDNET}" in \
+		[Yy][Ee][Ss]) echo "net.lo";; \
+		*) echo "";; \
+		esac
+_OLDNET!=	${_OLDNET_SH}
+_NET_LO=	${_OLDNET}$(shell ${_OLDNET_SH})
+
+INSTALLAFTER=	_installafter_${_NET_LO}
+CLEANFILES+=	${_NET_LO}
+TARGETS+=	${_NET_LO}
 
 MK=	../mk
 include ${MK}/os.mk
 include Makefile.${OS}
 include ${MK}/scripts.mk
 
-_installafter: realinstall
+_installafter_: realinstall
+
+_installafter_net.lo: realinstall
 	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO}

init.d/Makefile.Linux

@@ -1,7 +1,8 @@
 NET_LO=	net.lo
 
-SRCS+=	hwclock.in consolefont.in keymaps.in modules.in mtab.in numlock.in \
-	procfs.in termencoding.in
+SRCS+=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in killprocs.in \
+	modules.in mount-ro.in mtab.in numlock.in procfs.in sysfs.in \
+	termencoding.in
 
 .SUFFIXES:	.Linux.in
 .Linux.in:

init.d/adjkerntz.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 extra_commands="save"
@@ -7,8 +7,8 @@ extra_commands="save"
 description="Sets the local clock to UTC or Local Time." 
 description_save="Saves the current time in the BIOS."
 
-clock=${clock:-${CLOCK:-UTC}}
-if [ "${clock}" = "UTC" ]; then
+: ${clock:=${CLOCK:-UTC}}
+if [ "$clock" = "UTC" ]; then
 	utc="UTC"
 else
 	utc="Local Time"
@@ -18,17 +18,17 @@ depend()
 {
 	provide clock
 	# BSD adjkerntz needs to be able to write to /etc
-	if [ "${clock}" = "UTC" -a -e /etc/wall_cmos_clock ] ||
-	   [ "${clock}" != "UTC" -a ! -e /etc/wall_cmos_clock ]; then
+	if [ "$clock" = "UTC" -a -e /etc/wall_cmos_clock ] ||
+	   [ "$clock" != "UTC" -a ! -e /etc/wall_cmos_clock ]; then
 		need root
 	fi
-	keyword nojail noprefix
+	keyword -jail -prefix
 }
 
 start()
 {	
 	ebegin "Starting the System Clock Adjuster [${utc}]"
-	if [ "${clock}" != "UTC" ]; then
+	if [ "$clock" != "UTC" ]; then
 		echo >/etc/wall_cmos_clock
 		start-stop-daemon --start --exec /sbin/adjkerntz -- -i
 	else
@@ -48,8 +48,8 @@ save()
 stop()
 {
 	# Don't tweak the hardware clock on LiveCD halt.
-	if yesno "${clock_systohc:-${CLOCK_SYSTOHC}}"; then
-	   [ -z "${CDBOOT}" ] && save
+	if yesno "${clock_systohc:-$CLOCK_SYSTOHC}"; then
+	   [ -z "$CDBOOT" ] && save
 	fi
 
 	ebegin "Stopping the System Clock Adjuster"

init.d/bootmisc.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend()
@@ -8,7 +8,7 @@ depend()
 	need localmount
 	before logger
 	after clock sysctl
-	keyword noprefix
+	keyword -prefix
 }
 
 dir_writeable()
@@ -16,25 +16,27 @@ dir_writeable()
 	mkdir "$1"/.test.$$ 2>/dev/null && rmdir "$1"/.test.$$
 }
 
+: ${wipe_tmp:=${WIPE_TMP:-yes}}
+
 cleanup_tmp_dir()
 {
 	local dir="$1"
 
-	if ! [ -d "${dir}" ]; then
-		mkdir -p "${dir}" || return $?
+	if ! [ -d "$dir" ]; then
+		mkdir -p "$dir" || return $?
 	fi
-	dir_writeable "${dir}" || return 1
-	chmod +t "${dir}"
-	cd "${dir}"
-	if yesno ${wipe_tmp:-${WIPE_TMP:-yes}}; then
-		ebegin "Wiping ${dir} directory"
+	dir_writeable "$dir" || return 1
+	chmod a+rwt "$dir"
+	cd "$dir"
+	if yesno $wipe_tmp; then
+		ebegin "Wiping $dir directory"
 		local startopts="-x . -depth"
-		[ "${RC_UNAME}" = "Linux" ] && startopts=". -xdev -depth"
+		[ "$RC_UNAME" = Linux ] && startopts=". -xdev -depth"
 
 		# Faster than find
-		rm -rf -- [b-ikm-pr-zA-Z0-9\.]*
+		rm -rf -- [^ajlq\.]*
 
-		find ${startopts} ! -name . \
+		find $startopts ! -name . \
 			! -path "./lost+found" \
 			! -path "./lost+found/*" \
 			! -path "./quota.user" \
@@ -52,23 +54,35 @@ cleanup_tmp_dir()
 			-exec rm -rf {} \;
 		eend 0
 	else
-		ebegin "Cleaning ${dir} directory"
-		rm -rf -- "${dir}"/.X*-lock "${dir}"/esrv* "${dir}"/kio* \
-			"${dir}"/jpsock.* "${dir}"/.fam* "${dir}"/.esd* \
-			"${dir}"/orbit-* "${dir}"/ssh-* "${dir}"/ksocket-* \
-			"${dir}"/.*-unix
+		ebegin "Cleaning $dir directory"
+		rm -rf -- "$dir"/.X*-lock "$dir"/esrv* "$dir"/kio* \
+			"$dir"/jpsock.* "$dir"/.fam* "$dir"/.esd* \
+			"$dir"/orbit-* "$dir"/ssh-* "$dir"/ksocket-* \
+			"$dir"/.*-unix
 		eend 0
 	fi
 }
 
+mkutmp()
+{
+	: >"$1"
+	# Not all systems have the utmp group
+	chgrp utmp "$1" 2>/dev/null
+	chmod 0664 "$1"
+}
+
 start()
 {
-	local logw=false
+	# Remove any added console dirs
+	rm -rf "$RC_LIBEXECDIR"/console
+
+	local logw=false runw=false extra=
 	# Ensure that our basic dirs exist
-	for x in /var/log /var/run /tmp; do
-		if ! [ -d "${x}" ]; then
-			if ! mkdir -p "${x}"; then
-				eend 1 "failed to create needed directory ${x}"
+	[ "$RC_UNAME" = Linux ] && extra=/var/lib/misc # Satisfy Linux FHS
+	for x in /var/log /var/run /tmp $extra; do
+		if ! [ -d $x ]; then
+			if ! mkdir -p $x; then
+				eend 1 "failed to create needed directory $x"
 				return 1
 			fi
 		fi 
@@ -76,12 +90,12 @@ start()
 
 	if dir_writeable /var/run; then
 		ebegin "Creating user login records"
-		cp /dev/null /var/run/utmp
-		if dir_writeable /var/log; then
-			logw=true
-			[ -e /var/log/wtmp ] || cp /dev/null /var/log/wtmp
-			chmod 0644 /var/run/utmp /var/log/wtmp
-		fi
+		local xtra=
+		[ "$RC_UNAME" = NetBSD ] && xtra=x
+		for x in "" $xtra; do
+			mkutmp /var/run/utmp$x
+		done
+		[ -e /var/log/wtmp ] || mkutmp /var/log/wtmp
 		eend 0
 
 		ebegin "Cleaning /var/run"
@@ -90,26 +104,30 @@ start()
 			! -name ld-elf.so.hints ! -name ld.so.hints);
 		do
 			# Clean stale sockets
-			if [ -S "${x}" ] && type fuser >/dev/null 2>&1; then
-				fuser -s "${x}" || rm "${x}"
+			if [ -S "$x" ]; then
+				if type fuser >/dev/null 2>&1; then
+					fuser "$x" >/dev/null 2>&1 || rm -- "$x"
+				else
+					rm -- "$x"
+				fi
 			fi
-			[ ! -f "${x}" ] && continue
+			[ ! -f "$x" ] && continue
 			# Do not remove pidfiles of already running daemons
-			case "${x}" in
+			case "$x" in
 				*.pid)
 					start-stop-daemon --test --quiet \
-					--stop --pidfile "${x}" && continue
+					--stop --pidfile "$x" && continue
 				;;
 			esac
-			rm -f -- "${x}"
+			rm -f -- "$x"
 		done
 		eend 0
 	fi
 
 	# Clean up /tmp directories
 	local tmp=
-	for tmp in ${wipe_tmp_dirs-/tmp}; do
-		cleanup_tmp_dir "${tmp}"
+	for tmp in ${clean_tmp_dirs:-${wipe_tmp_dirs-/tmp}}; do
+		cleanup_tmp_dir "$tmp"
 	done
 
 	if dir_writeable /tmp; then
@@ -119,27 +137,32 @@ start()
 		rm -rf /tmp/.ICE-unix /tmp/.X11-unix 
 		mkdir -p /tmp/.ICE-unix /tmp/.X11-unix
 		chmod 1777 /tmp/.ICE-unix /tmp/.X11-unix
-		[ -x /sbin/restorecon ] && restorecon /tmp/.ICE-unix /tmp/.X11-unix
+		if [ -x /sbin/restorecon ]; then
+			restorecon /tmp/.ICE-unix /tmp/.X11-unix
+		fi
 	fi
 
-	if ${logw} || dir_writeable /var/log; then
+	if $logw || dir_writeable /var/log; then
 		# Create an 'after-boot' dmesg log
-		if [ "${RC_SYS}" != "VSERVER" -a "${RC_SYS}" != "OPENVZ" ]; then
+		if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ ]; then
 			dmesg > /var/log/dmesg
 			chmod 640 /var/log/dmesg
 		fi
 	fi
 
-	rm -f /etc/nologin
+	[ -w /etc/nologin ] && rm -f /etc/nologin
 	return 0
 }
 
 stop()
 {
 	# Write a halt record if we're shutting down
-	case "${RC_RUNLEVEL}" in
-		reboot|shutdown) [ "${RC_UNAME}" = "Linux" ] && halt -w;;
-	esac
+	if [ "$RC_RUNLEVEL" = shutdown ]; then
+		[ "$RC_UNAME" = Linux ] && halt -w
+		if [ "$RC_SYS" = OPENVZ ]; then
+			yesno $RC_REBOOT && printf "" >/reboot
+		fi
+	fi
 
 	return 0
 }

init.d/consolefont.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Sets a font for the consoles."
@@ -7,27 +7,24 @@ description="Sets a font for the consoles."
 depend()
 {
 	need localmount termencoding
-	after hotplug
-	keyword noopenvz noprefix nouml novserver noxenu
+	after hotplug bootmisc
+	keyword -openvz -prefix -uml -vserver -xenu
 }
 
 start()
 {
-	# Forget about any font until we are successful
-	rm -rf "${RC_LIBDIR}"/console
-
 	ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 	consolefont=${consolefont:-${CONSOLEFONT}}
 	unicodemap=${unicodemap:-${UNICODEMAP}}
 	consoletranslation=${consoletranslation:-${CONSOLETRANSLATION}}
 
-	if [ -z "${consolefont}" ]; then
+	if [ -z "$consolefont" ]; then
 		ebegin "Using the default console font"
 		eend 0
 		return 0
 	fi
 
-	if [ "${ttyn}" = 0 ]; then
+	if [ "$ttyn" = 0 ]; then
 		ebegin "Skipping font setup (rc_tty_number == 0)"
 		eend 0
 		return 0
@@ -36,39 +33,41 @@ start()
 	local x= param= sf_param= retval=0 ttydev=/dev/tty
 
 	# Get additional parameters
-	if [ -n "${consoletranslation}" ]; then
-		param="${param} -m ${consoletranslation}"
+	if [ -n "$consoletranslation" ]; then
+		param="$param -m $consoletranslation"
 	fi
 	if [ -n "${unicodemap}" ]; then
-		param="${param} -u ${unicodemap}"
+		param="$param -u $unicodemap"
 	fi
 
 	# Set the console font
-	ebegin "Setting console font [${consolefont}]"
+	ebegin "Setting console font [$consolefont]"
 	[ -d /dev/vc ] && ttydev=/dev/vc/
 	x=1
-	while [ ${x} -le ${ttyn} ]; do
-		setfont ${consolefont} ${param} -C ${ttydev}${x} >/dev/null 
-		retval=$((${retval} + $?))
-		x=$((${x} + 1))
+	while [ $x -le $ttyn ]; do
+		if ! setfont $consolefont $param -C $ttydev$x >/dev/null; then
+			retval=1
+			break
+		fi
+		x=$(($x + 1))
 	done
-	eend ${retval}
+	eend $retval
 
 	# Store the last font so we can use it ASAP on boot
-	if [ ${retval} -eq 0 -a -w "${RC_LIBDIR}" ]; then
-		mkdir -p "${RC_LIBDIR}"/console
-		for font in /usr/share/consolefonts/"${consolefont}".*; do
+	if [ $retval -eq 0 -a -w "$RC_LIBEXECDIR" ]; then
+		mkdir -p "$RC_LIBEXECDIR"/console
+		for font in /usr/share/consolefonts/"$consolefont".*; do
 			:
 		done
-		cp "${font}" "${RC_LIBDIR}"/console
-		echo "${font##*/}" > "${RC_LIBDIR}"/console/font
+		cp "$font" "$RC_LIBEXECDIR"/console
+		echo "${font##*/}" >"$RC_LIBEXECDIR"/console/font
 		if yesno ${unicode:-${UNICODE}}; then
-			echo "" > "${RC_LIBDIR}"/console/unicode
+			echo "" > "$RC_LIBEXECDIR"/console/unicode
 		else
-			rm -f "${RC_LIBDIR}"/console/unicode
+			rm -f "$RC_LIBEXECDIR"/console/unicode
 		fi
 
 	fi
 
-	return ${retval}
+	return $retval
 }

init.d/devd.in

@@ -1,16 +1,16 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/sbin/devd
-command_args=${devd_args}
+command_args=$devd_args
 name="Device State Change Daemon"
 
 depend() {
 	need localmount
 	after bootmisc
 	before net.lo0
-	keyword nojail noprefix
+	keyword -jail -prefix
 }
 
 start_pre() {

init.d/devdb.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Creates the dev database"

init.d/devfs.in

@@ -0,0 +1,36 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Mount system critical filesystems in /dev."
+
+depend() {
+	use dev
+	keyword -prefix -vserver
+}
+
+start() {
+	# Mount required stuff as user may not have then in /etc/fstab
+	for x in \
+		"devpts /dev/pts 0755 ,gid=5,mode=0620 devpts" \
+		"tmpfs /dev/shm 1777 ,nodev shm" \
+	; do
+		set -- $x
+		grep -Eq "[[:space:]]+$1$" /proc/filesystems || continue
+		mountinfo -q $2 && continue
+
+		if [ ! -d $2 ]; then
+			mkdir -m $3 -p $2 >/dev/null 2>&1 || \
+				ewarn "Could not create $2!"
+		fi
+
+		if [ -d $2 ]; then
+			ebegin "Mounting $2"
+			if ! fstabinfo --mount $2; then
+				mount -n -t $1 -o noexec,nosuid$4 $5 $2
+			fi
+			eend $?
+		fi
+	done
+	return 0
+}

init.d/dmesg.in

@@ -0,0 +1,18 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Set the dmesg level for a cleaner boot"
+
+depend()
+{
+	before dev modules
+	keyword -vserver
+}
+
+start()
+{
+	if [ -n "$dmesg_level" ]; then
+		dmesg -n$dmesg_level
+	fi
+}

init.d/dumpon.in

@@ -1,18 +1,18 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Configures a specific kernel dump device."
 
 depend() {
 	need swap
-	keyword nojail noprefix
+	keyword -jail -prefix
 }
 
 start() {
 	# Setup any user requested dump device
-	if [ -n "${dump_device}" ]; then
-		ebegin "Activating kernel core dump device (${dump_device})"
+	if [ -n "$dump_device" ]; then
+		ebegin "Activating kernel core dump device ($dump_device)"
 		dumpon ${dump_device}
 		eend $?
 	fi

init.d/fsck.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Check and repair filesystems according to /etc/fstab"
@@ -8,8 +8,8 @@ _IFS="
 
 depend()
 {
-	after clock modules
-	keyword nojail noopenvz noprefix notimeout novserver
+	use dev clock modules
+	keyword -jail -openvz -prefix -timeout -vserver -lxc
 }
 
 _abort() {
@@ -19,62 +19,114 @@ _abort() {
 
 # We should only reboot when first booting
 _reboot() {
-	if [ "${RC_RUNLEVEL}" = "${RC_BOOTLEVEL}" ]; then
+	if [ "$RC_RUNLEVEL" = "$RC_BOOTLEVEL" ]; then
 		reboot "$@"
 		_abort || return 1
 	fi
 }
 
+_forcefsck()
+{
+	[ -e /forcefsck ] || get_bootparam forcefsck
+}
+
+_on_ac_power()
+{
+	if [ -f /proc/acpi/ac_adapter/AC*/state ]; then
+		cat /proc/acpi/ac_adapter/AC*/state | while read line; do
+			case "$line" in
+			"state:"*"off-line") return 128;;
+			esac
+		done
+	elif [ -f /proc/pmu/info ]; then
+		cat /proc/pmu/info | while read line; do
+			case "$line" in
+			"AC Power"*": 0") return 128;;
+			esac
+		done
+	elif type envstat >/dev/null 2>&1; then
+		# NetBSD has envstat
+		envstat -d acpiacad0 2>/dev/null | while read line; do
+			case "$line" in
+			"connected:"*"OFF") return 128;;
+			esac
+		done
+	elif sysctl -q hw.acpi.acline >/dev/null 2>/dev/null; then
+		case $(sysctl -n hw.acpi.acline) in
+		0) return 1;;
+		*) return 0;;
+		esac
+	else
+		return 0
+	fi
+	[ $? != 128 ]
+}
+
 start()
 {
-	local reboot_opts= fsck_opts= p= check_extra=
+	local fsck_opts= p= check_extra=
 
 	if [ -e /fastboot ]; then
 		ewarn "Skipping fsck due to /fastboot"
 		return 0
 	fi
-	if [ -e /forcefsck ] || get_bootparam forcefsck; then
-		fsck_opts="${fsck_opts} -f"
+	if _forcefsck; then
+		fsck_opts="$fsck_opts -f"
 		check_extra="(check forced)"
+	elif ! yesno ${fsck_on_battery:-YES} && ! _on_ac_power; then
+		ewarn "Skipping fsck due to not being on AC power"
+		return 0
 	fi
 
-	if [ -n "${fsck_passno}" ]; then
-		check_extra="[passno ${fsck_passno}] ${check_extra}"
+	if [ -n "$fsck_passno" ]; then
+		check_extra="[passno $fsck_passno] $check_extra"
 	fi
-	ebegin "Checking local filesystems ${check_extra}"
-	for p in ${fsck_passno}; do
-		local IFS="${_IFS}"
-		case "${p}" in
-			[0-9]*) p="=${p}";;
+	ebegin "Checking local filesystems $check_extra"
+	for p in $fsck_passno; do
+		local IFS="$_IFS"
+		case "$p" in
+			[0-9]*) p="=$p";;
 		esac
-		set -- "$@" $(fstabinfo --passno "${p}")
+		set -- "$@" $(fstabinfo --passno "$p")
 		unset IFS
 	done
 
-	if [ "${RC_UNAME}" = "Linux" ]; then
-		fsck_opts="${fsck_opts} -C0 -T"
-		if [ -z "${fsck_passno}" ]; then
+	if [ "$RC_UNAME" = Linux ]; then
+		fsck_opts="$fsck_opts -C0 -T"
+		if [ -z "$fsck_passno" ]; then
 			fsck_args=${fsck_args--A -p}
 			if echo 2>/dev/null >/.test.$$; then
 				rm -f /.test.$$
-				fsck_opts="${fsck_opts} -R"
+				fsck_opts="$fsck_opts -R"
 			fi
 		fi
-		reboot_opts="-f"
 	fi
 
 	trap : INT QUIT
-	fsck ${fsck_args--p} ${fsck_opts} "$@"
+	fsck ${fsck_args--p} $fsck_opts "$@"
 	case $? in
-		0)       eend 0; return 0;;
-		1)       ewend 1 "Filesystems repaired"; return 0;;
-		2|3|4)   ewend 1 "Filesystems repaired, but reboot needed"
-		         _reboot ${reboot_opts} || return 1;;
-		8)       ewend 1 "Operational error"; return 0;;
-		12)      ewend 1 "fsck interupted"; return 1;;
-		*)       eend 2 "Filesystems couldn't be fixed"
-		         _abort || return 1;;
+	0)	eend 0; return 0;;
+	1)	ewend 1 "Filesystems repaired"; return 0;;
+	2|3)	if [ "$RC_UNAME" = Linux ]; then
+		 	ewend 1 "Filesystems repaired, but reboot needed"
+	         	_reboot -f
+		else
+			ewend 1 "Filesystems still have errors;" \
+				"manual fsck required"
+			_abort
+		fi;;
+	4)	if [ "$RC_UNAME" = Linux ]; then
+			ewend 1 "Fileystem errors left uncorrected, aborting"
+			_abort
+		else
+		 	ewend 1 "Filesystems repaired, but reboot needed"
+			_reboot
+		fi;;
+	8)	ewend 1 "Operational error"; return 0;;
+	12)	ewend 1 "fsck interupted";;
+	*)	eend 2 "Filesystems couldn't be fixed";;
 	esac
+	_abort || return 1
 }
 
 stop()
@@ -82,7 +134,8 @@ stop()
 	# Fake function so we always shutdown correctly.
 	_abort() { return 0; }
 	_reboot() { return 0; }
+	_forcefsck() { return 1; }
 
-	yesno "${fsck_shutdown}" && start
+	yesno $fsck_shutdown && start
 	return 0
 }

init.d/halt.sh.in

@@ -1,119 +0,0 @@
-#!@SHELL@
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-. @SYSCONFDIR@/init.d/functions.sh
-. "${RC_LIBDIR}"/sh/rc-functions.sh
-[ -r @SYSCONFDIR@/conf.d/localmount ] && . @SYSCONFDIR@/conf.d/localmount
-[ -r @SYSCONFDIR@/rc.conf ] && . @SYSCONFDIR@/rc.conf
-
-# Support LiveCD foo
-if [ -r /sbin/livecd-functions.sh ]; then
-	. /sbin/livecd-functions.sh
-	livecd_read_commandline
-fi
-
-stop_addon devfs
-stop_addon udev
-
-# Really kill things off before unmounting
-if [ -x /sbin/killall5 ]; then
-	killall5 -15
-	killall5 -9
-fi
-
-# Flush all pending disk writes now
-sync; sync
-
-# If we are in a VPS, we don't need anything below here, because
-#   1) we don't need (and by default can't) umount anything (VServer) or
-#   2) the host utils take care of all umounting stuff (OpenVZ)
-if [ "${RC_SYS}" = "VSERVER" -o "${RC_SYS}" = "OPENVZ" ]; then
-	[ "${RC_SYS}" = "OPENVZ" -a "$1" = "reboot" ] && echo "" > /reboot
-	if [ -e @SYSCONFDIR@/init.d/"$1".sh ]; then
-		. @SYSCONFDIR@/init.d/"$1".sh
-	else
-		exit 0
-	fi
-fi
-
-# If $svcdir is still mounted, preserve it if we can
-mnt=$(mountinfo --node "${RC_SVCDIR}")
-if [ -n "${mnt}" ] && \
-	rm -rf "${RC_LIBDIR}/tmp.$$" && \
-	mkdir -p "${RC_LIBDIR}/tmp.$$" 2>/dev/null \
-; then
-	rmdir "${RC_LIBDIR}/tmp.$$"
-	f_opts="-m -c"
-	[ "${RC_UNAME}" = "Linux" ] && f_opts="-c"
-	if type fuser >/dev/null 2>&1; then
-		if [ -n "$(fuser ${f_opts} "${svcdir}" 2>/dev/null)" ]; then
-			fuser -k ${f_opts} "${svcdir}" >/dev/null 2>&1
-			sleep 2
-		fi
-	fi
-	cp -p "${RC_SVCDIR}"/deptree "${RC_SVCDIR}"/depconfig \
-		"${RC_SVCDIR}"/softlevel "${RC_SVCDIR}"/nettree \
-		"${RC_SVCDIR}"/rc.log \
-		"${RC_LIBDIR}" 2>/dev/null
-	umount "${RC_SVCDIR}"
-	rm -rf "${RC_SVCDIR}"/*
-	# Pipe errors to /dev/null as we may have future timestamps
-	cp -p "${RC_LIBDIR}"/deptree "${RC_LIBDIR}"/depconfig \
-		"${RC_LIBDIR}"/softlevel "${RC_LIBDIR}"/nettree \
-		"${RC_LIBDIR}"/rc.log \
-		"${RC_SVCDIR}" 2>/dev/null
-	rm -f "${RC_LIBDIR}"/deptree "${RC_LIBDIR}"/depconfig \
-		"${RC_LIBDIR}"/softlevel "${RC_LIBDIR}"/nettree \
-		"${RC_LIBDIR}"/rc.log
-	# Release the memory disk if we used it
-	case "${mnt}" in
-		"/dev/md"[0-9]*) mdconfig -d -u "${mnt#/dev/md*}";;
-	esac
-fi
-
-unmounted=0
-# Remount the remaining filesystems read-only
-# Most BSD's don't need this as the kernel handles it nicely
-if [ "${RC_UNAME}" = "Linux" ]; then
-	ebegin "Remounting remaining filesystems read-only"
-	# We need the do_unmount function
-	. "${RC_LIBDIR}"/sh/rc-mount.sh
-	eindent
-	no_umounts_r="/dev|/dev/.*|${RC_SVCDIR}"
-	# RC_NO_UMOUNTS is an env var that can be set by plugins
-	OIFS=${IFS} SIFS=${IFS-y}
-	IFS=$IFS:
-	for x in ${no_umounts} ${RC_NO_UMOUNTS}; do
-		no_umounts_r="${no_umounts_r}|${x}"
-	done
-	if [ "${SIFS}" = "y" ]; then
-		IFS=$OIFS
-	else
-		unset IFS
-	fi
-	no_umounts_r="${no_umounts_r}|/proc|/proc/.*|/sys|/sys/.*"
-	no_umounts_r="^(${no_umounts_r})$"
-	fs=
-	for x in ${net_fs_list}; do
-		fs="${fs}${fs:+|}${x}"
-	done
-	[ -n "${fs}" ] && fs="^(${fs})$"
-	do_unmount "mount -n -o remount,ro" \
-		--skip-point-regex "${no_umounts_r}" \
-		${fs:+--skip-fstype-regex} ${fs} --nonetdev
-	eoutdent
-	eend $?
-	unmounted=$?
-fi
-
-if [ ${unmounted} -ne 0 ]; then
-	[ -x /sbin/sulogin ] && sulogin -t 10 /dev/console
-	exit 1
-fi
-
-# Load the final script - not needed on BSD so they should not exist
-[ -e @SYSCONFDIR@/init.d/"$1".sh ] && . @SYSCONFDIR@/init.d/"$1".sh
-
-# Always exit 0 here
-exit 0

init.d/hostid.in

@@ -1,15 +1,15 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 extra_commands="reset"
-hostid_file=${hostid_file:-/etc/hostid}
+: ${hostid_file:=/etc/hostid}
 
 depend()
 {
-	need root
+	use root
 	before devd net
-	keyword nojail noprefix
+	keyword -jail -prefix
 }
 
 _set()
@@ -20,14 +20,14 @@ _set()
 		id=$(echo "$1" | md5)
 		id="0x${id%????????????????????????}"
 	fi
-	ebegin "Setting Host ID: ${id}"
-	sysctl -w kern.hostid="${id}" >/dev/null
+	ebegin "Setting Host ID: $id"
+	sysctl -w kern.hostid="$id" >/dev/null
 	eend $? || return 1
 
 	if sysctl -n kern.hostuuid >/dev/null 2>&1; then
 		[ -n "$1" ] && id=$1
-		ebegin "Setting Host UUID: ${id}"
-		sysctl kern.hostuuid="${id}" >/dev/null
+		ebegin "Setting Host UUID: $id"
+		sysctl kern.hostuuid="$id" >/dev/null
 		eend $? || return 1
 	fi
 
@@ -38,35 +38,37 @@ _set()
 # otherwise we generate a random UUID.
 reset()
 {
-	local uuid=$(kenv smbios.system.uuid 2>/dev/null)
-	local x="[0-9a-f]"
-	local y="${x}${x}${x}${x}"
-	case "${uuid}" in
-		${y}${y}-${y}-${y}-${y}-${y}${y}${y});;
+	local uuid= x="[0-9a-f]" y="$x$x$x$x"
+
+	if type kenv >/dev/null 2>&1; then
+		uuid=$(kenv smbios.system.uuid 2>/dev/null)
+	fi
+	case "$uuid" in
+		$y$y-$y-$y-$y-$y$y$y);;
 		*) uuid=;;
 	esac
 
-	if [ -n "${uuid}" ]; then
-		rm -f "${hostid_file}"
+	if [ -n "$uuid" ]; then
+		rm -f "$hostid_file"
 	else
 		uuid=$(uuidgen)
-		if [ -z "${uuid}" ]; then
+		if [ -z "$uuid" ]; then
 			eerror "Unable to generate a UUID"
 			return 1
 		fi
-		if ! echo "${uuid}" > "${hostid_file}"; then
-			eerror "Failed to store UUID in \`${hostid_file}'"
+		if ! echo "$uuid" >"$hostid_file"; then
+			eerror "Failed to store UUID in \`$hostid_file'"
 			return 1
 		fi
 	fi
 
-	_set "${uuid}"
+	_set "$uuid"
 }
 
 start()
 {
-	if [ -r "${hostid_file}" ]; then
-		_set $(cat "${hostid_file}") 
+	if [ -r "$hostid_file" ]; then
+		_set $(cat "$hostid_file") 
 	else
 		reset
 	fi

init.d/hostname.in

@@ -1,17 +1,17 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Sets the hostname of the machine."
 
 depend() {
-	keyword noprefix
+	keyword -prefix
 }
 
 start()
 {
 	hostname=${hostname-${HOSTNAME-localhost}}
-	ebegin "Setting hostname to ${hostname}"
-	hostname "${hostname}"
+	ebegin "Setting hostname to $hostname"
+	hostname "$hostname"
 	eend $? "Failed to set the hostname"
 }

init.d/hwclock.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 extra_commands="save show"
@@ -8,12 +8,11 @@ description="Sets the local clock to UTC or Local Time."
 description_save="Saves the current time in the BIOS."
 description_show="Displays the current time in the BIOS."
 
-clock_adjfile=${clock_adjfile:-${CLOCK_ADJFILE}}
-clock_args=${clock_args:-${CLOCK_OPTS}}
-clock_systohc=${clock_systohc:-${CLOCK_SYSTOHC}}
-
-clock=${clock:-${CLOCK:-UTC}}
-if [ "${clock}" = "UTC" ]; then
+: ${clock_adjfile:=${CLOCK_ADJFILE}}
+: ${clock_args:=${CLOCK_OPTS}}
+: ${clock_systohc:=${CLOCK_SYSTOHC}}
+: ${clock:=${CLOCK:-UTC}}
+if [ "$clock" = "UTC" ]; then
 	utc="UTC"
 	utc_cmd="--utc"
 else
@@ -24,12 +23,12 @@ fi
 depend()
 {
 	provide clock
-	if yesno ${clock_adjfile}; then
+	if yesno $clock_adjfile; then
 		use root
 	else
 		before *
 	fi
-	keyword noopenvz noprefix nouml novserver noxenu
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 setupopts()
@@ -47,7 +46,7 @@ setupopts()
 			;;
 	esac
 
-	case "${utc}" in
+	case "$utc" in
 		UTC|Local" "Time);;
 		*) unset utc_cmd;;
 	esac
@@ -58,7 +57,7 @@ _hwclock()
 {
 	local err="$(hwclock "$@" 2>&1 >/dev/null)"
 
-	[ -z "${err}" ] && return 0
+	[ -z "$err" ] && return 0
 	echo "${err}" >&2
 	return 1
 }
@@ -68,36 +67,38 @@ start()
 	local retval=0 errstr=""
 	setupopts
 
-	if [ -z "${utc_cmd}" ]; then
-		ewarn "Not setting clock for ${utc} system"
+	if [ -z "$utc_cmd" ]; then
+		ewarn "Not setting clock for $utc system"
 		return 0
 	fi
 
-	ebegin "Setting system clock using the hardware clock [${utc}]"
-	local rtc=
-	for rtc in /dev/rtc /dev/rtc[0-9]*; do
-		[ -e "${rtc}" ] && break
-	done
-	if [ ! -e "${rtc}" -a -e /proc/modules ]; then
-		modprobe -q rtc-cmos || modprobe -q rtc || modprobe -q genrtc
+	ebegin "Setting system clock using the hardware clock [$utc]"
+	if [ -e /proc/modules ]; then
+		local rtc=
+		for rtc in /dev/rtc /dev/rtc[0-9]*; do
+			[ -e "$rtc" ] && break
+		done
+		if [ ! -e "${rtc}" ]; then
+			modprobe -q rtc-cmos || modprobe -q rtc || modprobe -q genrtc
+		fi
 	fi
 
-	if [ -e /etc/adjtime ] && yesno ${clock_adjfile}; then
-		_hwclock --adjust ${utc_cmd}
-		retval=$((${retval} + $?))
+	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
+		_hwclock --adjust $utc_cmd
+		retval=$(($retval + $?))
 	fi
 	
 	# If setting UTC, don't bother to run hwclock when first booting
 	# as that's the default
-	if [ "${PREVLEVEL}" != "N" -o \
-		"${utc_cmd}" != "--utc" -o \
-		-n "${clock_args}" ];
+	if [ "$PREVLEVEL" != N -o \
+		"$utc_cmd}" != --utc -o \
+		-n "$clock_args" ];
 	then
-		_hwclock --hctosys ${utc_cmd} ${clock_args}
-		retval=$((${retval} + $?))
+		_hwclock --hctosys $utc_cmd $clock_args
+		retval=$(($retval + $?))
 	fi
 	
-	eend ${retval} "Failed to set the system clock"
+	eend $retval "Failed to set the system clock"
 
 	return 0
 }
@@ -105,37 +106,37 @@ start()
 stop()
 {
 	# Don't tweak the hardware clock on LiveCD halt.
-	[ -n "${CDBOOT}" ] && return 0
-	yesno ${clock_systohc} || return 0
+	[ -n "$CDBOOT" ] && return 0
+	yesno $clock_systohc || return 0
 
 	local retval=0 errstr=""
 	setupopts
 
-	[ -z "${utc_cmd}" ] && return 0
+	[ -z "$utc_cmd" ] && return 0
 
-	ebegin "Setting hardware clock using the system clock" "[${utc}]"
+	ebegin "Setting hardware clock using the system clock" "[$utc]"
 
-	if ! yesno "${clock_adjfile}"; then
+	if ! yesno $clock_adjfile; then
 		# Some implementations don't handle adjustments
-		if LC_ALL=C hwclock --help | grep -q "\-\-noadjfile"; then
-			utc_cmd="${utc_cmd} --noadjfile"
+		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
+			utc_cmd="$utc_cmd --noadjfile"
 		fi
 	fi
 
-	_hwclock --systohc ${utc_cmd} ${clock_args}
+	_hwclock --systohc $utc_cmd $clock_args
 	retval=$?
 
-	eend ${retval} "Failed to sync clocks" 
+	eend $retval "Failed to sync clocks" 
 }
 
 save()
 {
-	clock_systohc="yes"
+	clock_systohc=yes
 	stop
 }
 
 show()
 {
 	setupopts
-	hwclock --show "${utc_cmd}" ${clock_args} 
+	hwclock --show "$utc_cmd" $clock_args
 }

init.d/ipfw.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 # This is based on /etc/rc.firewall and /etc/rc.firewall6 from FreeBSD
@@ -13,7 +13,7 @@ opts="panic showstatus"
 depend() {
 	before net
 	provide firewall
-	keyword nojail
+	keyword -jail
 }
 
 ipfw() {
@@ -95,24 +95,24 @@ start() {
 	
 	# Add permits for this workstations published services below
 	# Only IPs and nets in firewall_allowservices is allowed in.
-	for i in ${ipfw_ip_in}; do
-		for p in ${ipfw_ports_in}; do
-			ipfw add pass tcp from ${i} to me ${p}
+	for i in $ipfw_ip_in; do
+		for p in $ipfw_ports_in; do
+			ipfw add pass tcp from $i to me $p
 		done
 	done
 
 	# Allow all connections from trusted IPs.
 	# Playing with the content of firewall_trusted could seriously
 	# degrade the level of protection provided by the firewall.
-	for i in ${ipfw_ip_trust}; do
-		ipfw add pass ip from ${i} to me
+	for i in $ipfw_ip_trust; do
+		ipfw add pass ip from $i to me
 	done
 	
 	ipfw add 65000 count ip from any to any
 
 	# Drop packets to ports where we don't want logging
-	for p in ${ipfw_ports_nolog}; do
-		ipfw add deny { tcp or udp } from any to any ${p} in
+	for p in $ipfw_ports_nolog; do
+		ipfw add deny { tcp or udp } from any to any $p in
 	done
 
 	# Broadcasts and muticasts
@@ -129,10 +129,10 @@ start() {
 
 	# Deny and (if wanted) log the rest unconditionally.
 	if yesno ${ipfw_log_deny:-no}; then
-		log="log"
+		log=log
 		sysctl net.inet.ip.fw.verbose=1 >/dev/null
 	fi
-	ipfw add deny ${log} ip from any to any
+	ipfw add deny $log ip from any to any
 
 	eend 0
 }

init.d/keymaps.in

@@ -1,26 +1,27 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Applies a keymap for the consoles."
 
-ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
-unicode=${unicode:-${UNICODE}}
-keymap=${keymap:-${KEYMAP}}
-extended_keymaps=${extended_keymaps:-${EXTENDED_KEYMAPS}}
-windowkeys=${windowkeys:-${SET_WINDOWSKEYS}} 
-fix_euro=${fix_euro:-${FIX_EURO}}
-dumpkeys_charset=${dumpkeys_charset:-${DUMPKEYS_CHARSET}}
-
 depend()
 {
 	need localmount termencoding
-	keyword noopenvz noprefix nouml novserver noxenu
+	after bootmisc
+	keyword -openvz -prefix -uml -vserver -xenu
 }
 
 start()
 {
-	if [ -z "${keymap}" ]; then
+	ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
+	: ${unicode:=$UNICODE}
+	: ${keymap:=$KEYMAP}
+	: ${extended_keymaps:=$EXTENDED_KEYMAPS}
+	: ${windowkeys:=$SET_WINDOWSKEYS} 
+	: ${fix_euro:=$FIX_EURO}
+	: ${dumpkeys_charset:=${DUMPKEYS_CHARSET}}
+
+	if [ -z "$keymap" ]; then
 		eerror "You need to setup keymap in /etc/conf.d/keymaps first"
 		return 1
 	fi
@@ -33,35 +34,37 @@ start()
 		echo 1 > /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
 	fi
 
-	ebegin "Loading key mappings [${keymap}]"
-	local loadkeys_uni= wkeys= kmode="-a" msg="ASCII"
-	if yesno ${unicode}; then
-		loadkeys_uni="--unicode"
+	local wkeys= kmode="-a" msg="ASCII"
+	if yesno $unicode; then
 		kmode="-u"
 		msg="UTF-8"
 	fi
-	yesno ${windowkeys} && wkeys="windowkeys"
-	loadkeys -q ${loadkeys_uni} ${wkeys} ${keymap} ${extended_keymaps} 
+	yesno $windowkeys && wkeys="windowkeys"
+
+	# Set terminal encoding to either ASCII or UNICODE.
+	# See utf-8(7) for more information.
+	ebegin "Setting keyboard mode [$msg]"
+	n=1
+	while [ $n -le $ttyn ]; do
+		kbd_mode $kmode -C $ttydev$n
+		n=$(($n + 1))
+	done
+	eend 0
+
+	ebegin "Loading key mappings [$keymap]"
+	loadkeys -q $wkeys $keymap $extended_keymaps
 	eend $? "Error loading key mappings" || return $?
 
-	if yesno ${fix_euro}; then
+	if yesno $fix_euro; then
 		ebegin "Fixing font for euro symbol"
 		# Fix some fonts displaying the Euro, #173528.
 		echo "altgr keycode 18 = U+20AC" | loadkeys -q
 		eend $?
 	fi
 
-	# Set terminal encoding to either ASCII or UNICODE.
-	# See utf-8(7) for more information.
-	ebegin "Setting keyboard mode [${msg}]"
-	if yesno ${unicode}; then
-		dumpkeys ${dumpkeys_charset:+-c} \
-			${dumpkeys_charset} | loadkeys --unicode
+	# Save the keymapping for use immediately at boot
+	if [ -w "$RC_LIBEXECDIR" ]; then
+		mkdir -p "$RC_LIBEXECDIR"/console
+		dumpkeys >"$RC_LIBEXECDIR"/console/keymap
 	fi
-	n=1
-	while [ ${n} -le "${ttyn}" ]; do
-		kbd_mode "${kmode}" -C "${ttydev}${n}"
-		n=$((${n} + 1))
-	done
-	eend 0
 }

init.d/killprocs.in

@@ -0,0 +1,22 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Kill all processes so we can unmount disks cleanly."
+
+depend()
+{
+	keyword -prefix
+}
+
+start()
+{
+	ebegin "Terminating remaining processes"
+	killall5 -15
+	sleep 1
+	eend 0
+	ebegin "Killing remaining processes"	
+	killall5 -9
+	sleep 1
+	eend 0
+}

init.d/local.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Executes user commands in /etc/conf.d/local"
@@ -7,7 +7,7 @@ description="Executes user commands in /etc/conf.d/local"
 depend()
 {
 	after *
-	keyword notimeout
+	keyword -timeout
 }
 
 start()
@@ -39,5 +39,5 @@ stop()
 		. @SYSCONFDIR@/conf.d/local.stop
 	fi
 
-	eend $? $"Failed to stop local"
+	eend $? "Failed to stop local"
 }

init.d/localmount.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Mounts disks and swap according to /etc/fstab."
@@ -8,19 +8,19 @@ depend()
 {
 	need fsck
 	use lvm modules mtab
-	keyword nojail noopenvz noprefix novserver
+	keyword -jail -openvz -prefix -vserver -lxc
 }
 
 start()
 {
 	# Mount local filesystems in /etc/fstab.
 	local types="noproc" x=
-	for x in ${net_fs_list}; do
+	for x in $net_fs_list; do
 		types="${types},${x}"
 	done
 
 	ebegin "Mounting local filesystems"
-	mount -at "${types}"
+	mount -at "$types"
 	eend $? "Some local filesystem failed to mount"
 
 	# Always return 0 - some local mounts may not be critical for boot
@@ -31,39 +31,33 @@ stop()
 {
 	# We never unmount / or /dev or $RC_SVCDIR
 	local x= no_umounts_r="/|/dev|/dev/.*|${RC_SVCDIR}"
-
+	no_umounts_r="${no_umounts_r}|/bin|/sbin|/lib|/libexec"
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
-	OIFS=${IFS} SIFS=${IFS-y}
+	OIFS=$IFS SIFS=${IFS-y}
 	IFS=$IFS:
-	for x in ${no_umounts} ${RC_NO_UMOUNTS}; do
-		no_umounts_r="${no_umounts_r}|${x}"
+	for x in $no_umounts $RC_NO_UMOUNTS; do
+		no_umounts_r="$no_umounts_r|$x"
 	done
-	if [ "${SIFS}" = "y" ]; then
+	if [ "$SIFS" = y ]; then
 		IFS=$OIFS
 	else
 		unset IFS
 	fi
 
-	if [ "${RC_UNAME}" = "Linux" ]; then
-		no_umounts_r="${no_umounts_r}|/proc|/proc/.*|/sys|/sys/.*"
+	if [ "$RC_UNAME" = Linux ]; then
+		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/sys|/sys/.*"
 	fi
-	no_umounts_r="^(${no_umounts_r})$"
+	no_umounts_r="^($no_umounts_r)$"
 
 	# Flush all pending disk writes now
 	sync; sync
 
-	# Try to unmount all tmpfs filesystems not in use, else a deadlock may
-	# occure, bug #13599.
-	# As $RC_SVCDIR may also be tmpfs we cd to it to lock it
-	cd "${RC_SVCDIR}"
-	umount -a -t tmpfs 2>/dev/null
-
-	. "${RC_LIBDIR}"/sh/rc-mount.sh
+	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 
 	# Umount loopback devices
 	einfo "Unmounting loopback devices"
 	eindent
-	do_unmount "umount -d" --skip-point-regex "${no_umounts_r}" \
+	do_unmount "umount -d" --skip-point-regex "$no_umounts_r" \
 		--node-regex "^/dev/loop"
 	eoutdent
 
@@ -72,12 +66,12 @@ stop()
 	einfo "Unmounting filesystems"
 	eindent
 	local fs=
-	for x in ${net_fs_list}; do
-		fs="${fs}${fs:+|}${x}"
+	for x in $net_fs_list; do
+		fs="$fs${fs:+|}$x"
 	done
-	[ -n "${fs}" ] && fs="^(${fs})$"
-	do_unmount "umount" --skip-point-regex "${no_umounts_r}" \
-		${fs:+--skip-fstype-regex} ${fs} --nonetdev
+	[ -n "$fs" ] && fs="^($fs)$"
+	do_unmount umount --skip-point-regex "$no_umounts_r" \
+		${fs:+--skip-fstype-regex} $fs --nonetdev
 	eoutdent
 
 	return 0

init.d/mixer.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 extra_commands="restore"
@@ -7,7 +7,7 @@ extra_commands="restore"
 depend()
 {
 	need localmount
-	keyword nojail noprefix
+	keyword -jail -prefix
 }
 
 restore()
@@ -17,8 +17,8 @@ restore()
 	eindent
 	for mixer in /dev/mixer*; do
 		if [ -r "/var/db/${mixer#/dev/}-state" ]; then
-			vebegin "${mixer}"
-			mixer -f "${mixer}" \
+			vebegin "$mixer"
+			mixer -f "$mixer" \
 			$(cat "/var/db/${mixer#/dev/}-state") >/dev/null
 			veend $?
 			: $((retval += $?))
@@ -37,11 +37,11 @@ stop()
 	ebegin "Saving mixer settings"
 	eindent
 	for mixer in /dev/mixer*; do
-		vebegin "${mixer}"
-		mixer -f "${mixer}" -s >/var/db/"${mixer#/dev/}"-state
+		vebegin "$mixer"
+		mixer -f "$mixer" -s >/var/db/"${mixer#/dev/}"-state
 		veend $?
 		: $((retval += $?))
 	done
 	eoutdent
-	eend ${retval}
+	eend $retval
 }

init.d/modules.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Loads a user defined list of kernel modules."
@@ -7,7 +7,7 @@ description="Loads a user defined list of kernel modules."
 depend()
 {
 	use isapnp
-	keyword noopenvz noprefix novserver
+	keyword -openvz -prefix -vserver -lxc
 }
 
 start()
@@ -24,47 +24,40 @@ start()
 	local KV_MICRO=${x%%-*}
 
 	local list= x= xx= y= args= mpargs= cnt=0 a=
-	for x in "${KV}" \
-		${KV_MAJOR}.${KV_MINOR}.${KV_MICRO} \
-		${KV_MAJOR}.${KV_MINOR} \
+	for x in "$KV" \
+		$KV_MAJOR.$KV_MINOR.$KV_MICRO \
+		$KV_MAJOR.$KV_MINOR \
 	; do
-		eval list=\$modules_$(shell_var "${x}")
-		[ -n "${list}" ] && break
+		eval list=\$modules_$(shell_var "$x")
+		[ -n "$list" ] && break
 	done
-	[ -z "${list}" ] && list=${modules}
+	[ -z "$list" ] && list=$modules
 
-	for x in ${list}; do
+	for x in $list; do
 		a=${x#*:}
-		if [ "${a}" = "${x}" ]; then
+		if [ "$a" = "$x" ]; then
 			unset mpargs
-			ebegin "Loading module ${x}"
+			ebegin "Loading module $x"
 		else
 			x=${x%%:*}
-			mpargs="-o ${a}"
-			ebegin "Loading module ${x} as ${a}"
+			mpargs="-o $a"
+			ebegin "Loading module $x as $a"
 		fi
-		aa=$(shell_var "${a}")
-		xx=$(shell_var "${x}")
-		for y in "${KV}" \
-			${KV_MAJOR}.${KV_MINOR}.${KV_MICRO} \
-			${KV_MAJOR}.${KV_MINOR} \
+		aa=$(shell_var "$a")
+		xx=$(shell_var "$x")
+		for y in "$KV" \
+			$KV_MAJOR.$KV_MINOR.$KV_MICRO \
+			$KV_MAJOR.$KV_MINOR \
 		; do
-			eval args=\$module_${aa}_args_$(shell_var "${y}")
+			eval args=\$module_${aa}_args_$(shell_var "$y")
 			[ -n "${args}" ] && break
-			eval args=\$module_${xx}_args_$(shell_var "${y}")
+			eval args=\$module_${xx}_args_$(shell_var "$y")
 			[ -n "${args}" ] && break
 		done
-		[ -z "${args}" ] && eval args=\$module_${aa}_args
-		[ -z "${args}" ] && eval args=\$module_${xx}_args
-		eval modprobe -q "${mpargs}" "${x}" "${args}"
-		eend $? "Failed to load ${x}" && cnt=$((${cnt} + 1))
+		[ -z "$args" ] && eval args=\$module_${aa}_args
+		[ -z "$args" ] && eval args=\$module_${xx}_args
+		eval modprobe -q "$mpargs" "$x" "$args"
+		eend $? "Failed to load $x" && cnt=$(($cnt + 1))
 	done
-	einfo "Autoloaded ${cnt} module(s)"
-
-	# Just in case a sysadmin prefers generic symbolic links in
-	# /lib/modules/boot for boot time modules we will load these modules
-	[ -n "$(modprobe -l -t boot)" ] && modprobe -a -t boot \* 2>/dev/null
-	
-	# Above test clobbers the return
-	return 0
+	einfo "Autoloaded $cnt module(s)"
 }

init.d/mount-ro.in

@@ -0,0 +1,46 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Re-mount filesytems read-only for a clean reboot."
+
+depend()
+{
+	need killprocs savecache
+	keyword -prefix -openvz -vserver -lxc
+}
+
+start()
+{
+	# Flush all pending disk writes now
+	sync; sync
+
+	ebegin "Remounting remaining filesystems read-only"
+	# We need the do_unmount function
+	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
+	eindent
+	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|${RC_SVCDIR}" x= fs=
+	m="$m|/bin|/sbin|/lib|/libexec"
+	# RC_NO_UMOUNTS is an env var that can be set by plugins
+	local OIFS=$IFS SIFS=${IFS-y} IFS=$IFS
+	IFS=$IFS:
+	for x in $no_umounts $RC_NO_UMOUNTS; do
+		m="$m|$x"
+	done
+	if [ "$SIFS" = y ]; then
+		IFS=$OIFS
+	else
+		unset IFS
+	fi
+	m="^($m)$"
+	fs=
+	for x in $net_fs_list; do
+		fs="$fs${fs:+|}$x"
+	done
+	[ -n "$fs" ] && fs="^($fs)$"
+	do_unmount "umount -r" \
+		--skip-point-regex "$m" \
+		${fs:+--skip-fstype-regex} $fs --nonetdev
+	eoutdent
+	eend $?
+}

init.d/moused.in

@@ -1,62 +1,62 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 mouse=${RC_SVCNAME##*.}
-if [ -n "${name}" -a "${mouse}" != "moused" ]; then
-	moused_device=/dev/"${mouse}"
-	pidfile=/var/run/moused-"${mouse}".pid
+if [ -n "$mouse" -a "$mouse" != "moused" ]; then
+	moused_device=/dev/"$mouse"
+	pidfile=/var/run/moused-"$mouse".pid
 else
 	pidfile=/var/run/moused.pid
 fi
 name="Console Mouse Daemon"
-[ -n "${moused_device}" ] && name="${name} (${moused_device})"
+[ -n "$moused_device" ] && name="$name ($moused_device)"
 
 depend()
 {
 	need localmount
 	after bootmisc
-	keyword nojail noprefix
+	keyword -jail -prefix
 }
 
 start()
 {
-	ebegin "Starting ${name}" 
+	ebegin "Starting $name" 
 
-	if [ -z "${moused_device}" ]; then
+	if [ -z "$moused_device" ]; then
 		local dev=
 		for dev in /dev/psm[0-9]* /dev/ums[0-9]*; do
-			[ -c "${dev}" ] || continue
+			[ -c "$dev" ] || continue
 			[ -e /var/run/moused-"${dev##*/}".pid ] && continue 
-			moused_device=${dev}
+			moused_device=$dev
 			eindent
-			einfo "Using mouse on ${moused_device}"
+			einfo "Using mouse on $moused_device"
 			eoutdent
 			break
 		done
 	fi
 
-	if [ -z "${moused_device}" ]; then
+	if [ -z "$moused_device" ]; then
 		eend 1 "No mouse device found" 
 		return 1
 	fi
 
 	local args=
 	eval args=\$moused_args_${moused_device##*/}
-	[ -z "${args}" ] && args=${moused_args}
+	[ -z "$args" ] && args=$moused_args
 
 	start-stop-daemon --start --exec /usr/sbin/moused \
-		--pidfile "${pidfile}" \
-		-- ${args} -p "${moused_device}" -I "${pidfile}"
+		--pidfile "$pidfile" \
+		-- $args -p "$moused_device" -I "$pidfile"
 	local retval=$?
 	
-	if [ ${retval} = 0 ]; then
+	if [ $retval = 0 ]; then
 		local ttyv=
 		for ttyv in /dev/ttyv*; do
-			vidcontrol < "${ttyv}" -m on
+			vidcontrol < "$ttyv" -m on
 			: $((retval+= $?))
 		done
 	fi
 	
-	eend ${retval} "Failed to start moused"
+	eend $retval "Failed to start moused"
 }

init.d/mtab.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Update /etc/mtab to match what the kernel knows about"
@@ -7,11 +7,17 @@ description="Update /etc/mtab to match what the kernel knows about"
 depend()
 {
 	need root
-	keyword noprefix
+	keyword -prefix
 }
 
 start()
 {
+	# /etc/mtab could be a symlink to /proc/mounts
+	if [ ! -w /etc/mtab -a -L /etc/mtab ]; then
+		eeinfo "Skipping mtab update (non writeable symlink)"
+		return 0
+	fi
+
 	ebegin "Updating /etc/mtab"
 	if ! echo 2>/dev/null >/etc/mtab; then
 		ewend 1 "/etc/mtab is not updateable"

init.d/net.lo.in

@@ -1,8 +1,8 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
-MODULESDIR="${RC_LIBDIR}/net"
+MODULESDIR="${RC_LIBEXECDIR}/net"
 MODULESLIST="${RC_SVCDIR}/nettree"
 _config_vars="config routes"
 
@@ -21,7 +21,7 @@ depend()
 	need localmount
 	after bootmisc
 	provide net
-	keyword nojail noprefix novserver
+	keyword -jail -prefix -vserver
 
 	case "${IFACE}" in
 		lo|lo0);;
@@ -445,6 +445,35 @@ _load_config()
 	config_index=-1
 }
 
+# Support functions
+_run_if()
+{
+	local cmd=$1 iface=$2 ifr=${IFACE} ifv=${IFVAR}
+	# Ensure that we don't stamp on real values
+	local IFACE= IFVAR=
+	shift
+	if [ -n "${iface}" ]; then
+		IFACE="${iface}"
+		[ "${iface}" != "${ifr}" ] && IFVAR=$(shell_var "${IFACE}")
+	else
+		IFACE=${ifr}
+		IFVAR=${ifv}
+	fi
+	${cmd}
+}
+interface_exists()
+{
+	_run_if _exists "$@"
+}
+interface_up()
+{
+	_run_if _up "$@"
+}
+interface_down()
+{
+	_run_if _down "$@"
+}
+
 start()
 {
 	local IFACE=${RC_SVCNAME#*.} oneworked=false module=
@@ -566,7 +595,7 @@ ${routes}"
 		fi
 	fi
 
-	local OIFS="${IFS}" SIFS=${IFS-y}
+	local OIFS="${IFS}" SIFS="${IFS-y}"
 	local IFS="$__IFS"
 	for cmd in ${routes}; do
 		unset IFS
@@ -581,7 +610,8 @@ ${routes}"
 			-net" "*|-host" "*);;
 			*" "netmask" "*)                   cmd="-net ${cmd}";;
 			*.*.*.*/32*)                       cmd="-host ${cmd}";;
-			*.*.*.*/*|0.0.0.0" "*|default" "*) cmd="-net ${cmd}";;
+			*.*.*.*/*|0.0.0.0|0.0.0.0" "*)     cmd="-net ${cmd}";;
+			default|default" "*)               cmd="-net ${cmd}";;
 			*)                                 cmd="-host ${cmd}";;
 		esac
 		if ${hidefirstroute}; then
@@ -652,8 +682,8 @@ stop()
 		fi
 	done
 
-	# Only delete addresses for non PPP interfaces
-	if ! [ "$(command -v is_ppp)" = "is_ppp" ] || ! is_ppp; then
+	# Only delete addresses for interfaces that exist
+	if _exists; then
 		_delete_addresses "${IFACE}"
 	fi
 

init.d/netmount.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Mounts network shares according to /etc/fstab."
@@ -11,7 +11,7 @@ need_portmap()
 "
 	set -- $(fstabinfo --options --fstype nfs,nfs4)
 	for opts; do
-		case ,${opts}, in
+		case ,$opts, in
 			*,noauto,*|*,nolock,*);;
 			*) return 0;;
 		esac
@@ -27,15 +27,15 @@ depend()
 	if need_portmap; then
 		pmap="rpc.statd"
 		[ -x @SYSCONFDIR@/init.d/rpcbind ] \
-			&& pmap="${pmap} rpcbind" \
-			|| pmap="${pmap} portmap"
+			&& pmap="$pmap rpcbind" \
+			|| pmap="$pmap portmap"
 	fi
 
 	config /etc/fstab
-	need net ${pmap}
+	need net $pmap
 	use afc-client amd autofs openvpn
 	use dns nfs nfsmount portmap rpcbind rpc.statd rpc.lockd
-	keyword nojail noprefix novserver
+	keyword -jail -prefix -vserver
 }
 
 start()
@@ -44,8 +44,8 @@ start()
 	[ -x @SYSCONFDIR@/init.d/rpcbind ] && pmap="rpcbind"
 
 	local x= fs=
-	for x in ${net_fs_list}; do
-		case "${x}" in
+	for x in $net_fs_list; do
+		case "$x" in
 			nfs|nfs4)
 			# If the nfsmount script took care of the nfs
 			# filesystems, then there's no point in trying
@@ -55,16 +55,16 @@ start()
 			# Only try to mount NFS filesystems if portmap was
 			# started. This is to fix "hang" problems for new
 			# users who do not add portmap to the default runlevel.
-			if need_portmap && ! service_started "${pmap}"; then
+			if need_portmap && ! service_started "$pmap"; then
 				continue
 			fi
 			;;
 		esac
-		fs="${fs}${fs:+,}${x}"
+		fs="$fs${fs:+,}$x"
 	done
 
 	ebegin "Mounting network filesystems"
-	mount -at ${fs}
+	mount -at $fs
 	ewend $? "Could not mount all network filesystems"
 	return 0
 }
@@ -74,24 +74,24 @@ stop()
 	local x= fs=
 
 	ebegin "Unmounting network filesystems"
-	. "${RC_LIBDIR}/sh/rc-mount.sh"
+	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 
-	for x in ${net_fs_list}; do
-		fs="${fs}${fs:+,}${x}"
+	for x in $net_fs_list; do
+		fs="$fs${fs:+,}$x"
 	done
-	if [ -n "${fs}" ]; then
-		umount -at ${fs} || eerror "Failed to simply unmount filesystems"
+	if [ -n "$fs" ]; then
+		umount -at $fs || eerror "Failed to simply unmount filesystems"
 	fi
 
 	eindent
 	fs=
-	for x in ${net_fs_list}; do
-		fs="${fs}${fs:+|}${x}"
+	for x in $net_fs_list; do
+		fs="$fs${fs:+|}$x"
 	done
-	[ -n "${fs}" ] && fs="^(${fs})$"
-	do_unmount "umount" ${fs:+--fstype-regex} ${fs} --netdev
+	[ -n "$fs" ] && fs="^($fs)$"
+	do_unmount umount ${fs:+--fstype-regex} $fs --netdev
 	retval=$?
 
 	eoutdent
-	eend ${retval} "Failed to unmount network filesystems"
+	eend $retval "Failed to unmount network filesystems"
 }

init.d/network.in

@@ -0,0 +1,291 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+# This script was inspired by the equivalent rc.d network from NetBSD.
+
+description="Configures network interfaces."
+__nl="
+"
+
+depend()
+{
+	need localmount
+	after bootmisc
+	provide net
+	keyword -jail -prefix -vserver
+}
+
+uniqify()
+{
+	local result= i=
+	for i; do
+		case " $result " in
+		*" $i "*);;
+		*) result="$result $i";;
+		esac
+	done
+	echo "${result# *}"
+}
+
+reverse()
+{
+	local result= i=
+	for i; do
+		result="$i $result"
+	done
+	echo "${result# *}"
+}
+
+sys_interfaces()
+{
+	case "$RC_UNAME" in
+	Linux)
+		local w= rest= i= cmd=$1
+		while read w rest; do
+			i=${w%%:*}
+			[ "$i" != "$w" ] || continue
+			if [ "$cmd" = u ]; then
+				ifconfig "$i" | grep -q "[ ]*UP" || continue
+			fi
+			printf "%s " "$i"
+		done </proc/net/dev
+		;;
+	*)
+		ifconfig -l$1
+		;;
+	esac
+}
+
+auto_interfaces()
+{
+	local ifs= c= f=
+
+	case "$RC_UNAME" in
+	NetBSD)
+		for c in $(ifconfig -C 2>/dev/null); do
+			for f in /etc/ifconfig.${c}[0-9]*; do
+				[ -f "$f" ] && printf "%s" "$f{##*.} "
+			done
+		done
+		;;
+	*)
+		for f in /etc/ifconfig.*; do
+			[ -f "$f" ] && printf "%s" "${f##*.} "
+		done
+		for f in /etc/ip.*; do
+			[ -f "$f" ] && printf "%s" "${f##*.} "
+		done
+		;;
+	esac
+	echo
+}
+
+interfaces()
+{
+	uniqify $(sys_interfaces "$@") $interfaces $(auto_interfaces)
+}
+
+dumpargs()
+{
+	local f="$1"
+
+	shift
+	case "$@" in
+	'')		[ -f "$f" ] && cat "$f";;
+	*"$__nl"*)	echo "$@";;
+	*)
+		(
+		 	set -o noglob
+			IFS=';'; set -- $@
+			IFS="$__nl"; echo "$*"
+		);;
+	esac
+}
+
+intup=false
+runip()
+{
+	local int="$1" err=
+	shift
+
+	# Ensure we have a valid broadcast address
+	case "$@" in
+	*" broadcast "*|*" brd "*) ;;
+	*) set -- "$@" brd +;;
+	esac
+
+	err=$(LC_ALL=C ip address add "$@" dev "$int" 2>&1)
+	if [ -z "$err" ]; then
+		# ip does not bring up the interface when adding addresses
+		if ! $intup; then
+			ip link set "$int" up
+			intup=true
+		fi
+		return 0
+	fi
+	if [ "$err" = "RTNETLINK answers: File exists" ]; then
+		ip address del "$@" dev "$int" 2>/dev/null
+	fi
+	# Localise the error
+	ip address add "$@" dev "$int"
+}
+
+routeflush()
+{
+	if [ "$RC_UNAME" = Linux ]; then
+		if [ -x /sbin/ip ]; then
+			ip route flush scope global
+		else
+			# Sadly we also delete some link routes, but
+			# this cannot be helped
+			local dest= gate= net= flags= rest=
+			route -n | while read dest gate net flags rest; do
+				[ -z "$net" ] && continue
+				case "$dest" in
+				[0-9]*)	;;
+				*)	continue;;
+				esac
+				local xtra= netmask="netmask $net"
+				case "$flags" in
+				U)	continue;;
+				*H*)	flags=-host; netmask=;;
+				*!*)	flags=-net; xtra=reject;;
+				*)	flags=-net;;
+				esac
+				route del $flags $dest $netmask $xtra
+			done
+		fi
+	else
+		route -qn flush
+	fi
+}
+
+runargs()
+{
+	dumpargs "$@" | while read -r args; do
+		case "$args" in
+		''|"#"*)	;;
+		*)
+				(
+				 	eval vebegin "${args#*!}"
+					eval "${args#*!}"
+					veend $?
+				);;
+		esac
+	done
+}
+
+start()
+{
+	local cr=0 r= int= intv= cmd= args= upcmd=
+
+	if [ -z "$domainname" -a -s /etc/defaultdomain ]; then
+		domainname=$(cat /etc/defaultdomain)
+	fi
+	if [ -n "$domainname" ]; then
+		ebegin "Setting NIS domainname: $domainname"
+		domainname "$domainname"
+		eend $?
+	fi
+
+	einfo "Starting network"
+	routeflush
+	if [ "$RC_UNAME" = "Linux" ]; then
+		ifconfig lo 127.0.0.1 netmask 255.0.0.0 || cr=1 
+		route add -net 127.0.0.0 netmask 255.0.0.0 \
+			gw 127.0.0.1 2>/dev/null
+		route add -net 127.0.0.0 netmask 255.0.0.0 \
+			gw 127.0.0.1 reject 2>/dev/null
+	else
+		ifconfig lo0 127.0.0.1 netmask 255.0.0.0 || cr=1
+		route -q add -inet 127.0.0.0 -netmask 255.0.0.0 \
+			127.0.0.1 -reject || cr=1
+	fi
+	eindent
+	for int in $(interfaces); do
+		local func= cf=
+		intv=$(shell_var "$int")
+		eval upcmd=\$ifup_$intv
+		for func in ip ifconfig; do
+			eval cmd=\$${func}_$intv
+			if [ -n "$cmd" -o -f /etc/"$func.$int" ]; then
+				cf=/etc/"$func.$int"
+				break
+			fi
+		done
+		[ -n "$cf" -o -n "$upcmd" -o \
+			-f /etc/ifup."$int" -o -f "$cf" ] || continue
+		veinfo "$int"
+		case "$func" in
+		ip)	func=runip; intup=false;;
+		esac
+		eindent
+		runargs /etc/ifup."$int" "$upcmd"
+		r=0
+		dumpargs "$cf" "$cmd" | while read -r args; do
+			case "$args" in
+			''|"#"*)	;;
+			"!"*)
+					(
+					 	eval vebegin "${args#*!}"
+						eval "${args#*!}"
+						veend $?
+					);;
+			*)
+					(
+					 	set -o noglob
+						eval set -- "$args"
+						vebegin "$@"
+						$func "$int" "$@"
+						veend $?
+					);;
+			esac
+		done
+		eoutdent
+	done
+	eoutdent
+	eend $cr
+
+	if [ -n "$defaultroute" ]; then
+		ebegin "Setting default route $defaultroute"
+		if [ "$RC_UNAME" = Linux ]; then
+			route add default gw $defaultroute
+		else
+			route add default $defaultroute
+		fi
+		eend $?
+	fi
+
+	return 0
+}
+
+stop()
+{
+	# Don't stop the network at shutdown.
+ 	# We don't use the noshutdown keyword so that we are started again
+	# correctly if we go back to multiuser.
+	yesno ${shutdown_network:-YES} && yesno $RC_GOINGDOWN && return 0
+
+	local int= intv= cmd= downcmd= r=
+	einfo "Stopping network"
+	routeflush
+	eindent
+	for int in $(reverse $(interfaces u)); do
+		intv=$(shell_var "$int")
+		eval downcmd=\$ifdown_$intv
+		eval cmd=\$ip_$intv
+		[ -z "$cmd" ] && eval cmd=\$ifconfig_$intv
+		if [ -n "$cmd" -o -f /etc/ip."$int" -o \
+			-f /etc/ifconfig."$int" -o \
+			-n "$downcmd" -o -f /etc/ifdown."$int" ];
+		then
+			veinfo "$int"
+			runargs /etc/ifdown."$int" "$downcmd"
+			ifconfig "$int" down 2>/dev/null
+			ifconfig "$int" destroy 2>/dev/null
+		fi
+	done
+	eoutdent
+	eend 0
+}

init.d/newsyslog.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 required_files="/etc/newsyslog.conf"
@@ -7,12 +7,12 @@ required_files="/etc/newsyslog.conf"
 depend()
 {
 	need localmount
-	keyword noprefix
+	keyword -prefix
 }
 
 start()
 {
 	ebegin "Creating and/or trimming log files"
-	newsyslog -s ${newsyslog_args}
+	newsyslog -s $newsyslog_args
 	eend $?
 }

init.d/nscd.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/nscd
-command_args="${nscd_args}"
+command_args=$nscd_args
 pidfile=/var/run/nscd.pid
 name="Name Service Cache Daemon"
 
@@ -16,7 +16,7 @@ depend() {
 }
 
 flush() {
-	ebegin "Flushing ${name}"
+	ebegin "Flushing $name"
 	nscd -I all >/dev/null
 	eend $?
 }

init.d/numlock.in

@@ -1,15 +1,15 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Turns numlock on for the consoles."
 
-ttyn=${rc_tty_number:-${RC_TTY_NUMBER}:-12}
+ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 
 depend()
 {
 	need localmount
-	keyword noopenvz noprefix novserver
+	keyword -openvz -prefix -vserver -lxc
 }
 
 _setleds()
@@ -19,12 +19,12 @@ _setleds()
 	local dev=/dev/tty t= i=1 retval=0
 	[ -d /dev/vc ] && dev=/dev/vc/
 
-	while [ ${i} -le ${ttyn} ]; do
-		setleds -D "$1"num < ${dev}${i} || retval=1
-		i=$((${i} + 1))
+	while [ $i -le $ttyn ]; do
+		setleds -D "$1"num < $dev$i || retval=1
+		i=$(($i + 1))
 	done
 
-	return ${retval}
+	return $retval
 }
 
 start()

init.d/pf.in

@@ -1,54 +1,54 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 name="Packet Filter"
-pf_conf=${pf_conf:-${pf_rules:-/etc/pf.conf}}
-required_files=${pf_conf}
+: ${pf_conf:=${pf_rules:-/etc/pf.conf}}
+required_files=$pf_conf
 
 extra_commands="checkconfig showstatus"
 extra_started_commands="reload"
 
 depend() {
 	need localmount
-	keyword nojail noprefix
+	keyword -jail -prefix
 }
 
 start()
 {
-	ebegin "Starting ${name}"
+	ebegin "Starting $name"
 	if type kldload >/dev/null 2>&1; then
 		kldload pf 2>/dev/null
 	fi
 	pfctl -q -F all
-	pfctl -q -f "${pf_conf}" ${pf_args}
+	pfctl -q -f "$pf_conf" $pf_args
 	pfctl -q -e
 	eend $?
 }
 
 stop()
 {
-	ebegin "Stopping ${name}"
+	ebegin "Stopping $name"
 	pfctl -q -d
 	eend $?
 }
 
 checkconfig()
 {
-	ebegin "Checking ${name} configuration"
-	pfctl -n -f "${pf_conf}"
+	ebegin "Checking $name configuration"
+	pfctl -n -f "$pf_conf"
 	eend $?
 }
 
 reload()
 {
-	ebegin "Reloading ${name} rules."
-	pfctl -q -n -f "${pf_conf}" && \
+	ebegin "Reloading $name rules."
+	pfctl -q -n -f "$pf_conf" && \
 	{ 
 		# Flush everything but existing state entries that way when
 		# rules are read in, it doesn't break established connections.
 		pfctl -q -Fnat -Fqueue -Frules -FSources -Finfo -FTables -Fosfp
-		pfctl -q -f "${pf_conf}" ${pf_args}
+		pfctl -q -f "$pf_conf" $pf_args
 	}
 	eend $?
 }

init.d/powerd.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/powerd
-command_args=${powerd_args}
+command_args=$powerd_args
 pidfile=/var/run/powerd.pid
 name="Power Control Daemon"
 
@@ -12,16 +12,16 @@ depend()
 	need localmount
 	use logger
 	after bootmisc
-	keyword nojail noprefix
+	keyword -jail -prefix
 }
 
 start_pre()
 {
-	if [ -n "${powerd_battery_mode}" ]; then
-		command_args="${command_args} -b ${powerd_battery_mode}"
+	if [ -n "$powerd_battery_mode" ]; then
+		command_args="$command_args -b $powerd_battery_mode"
 	fi
 	if [ -n "${powerd_ac_mode}" ]; then
-		command_args="${command_args} -a ${powerd_ac_mode}"
+		command_args="$command_args -a $powerd_ac_mode"
 	fi
 }
 
@@ -29,7 +29,7 @@ stop_post()
 {
 	local level=$(sysctl -n dev.cpu.0.freq_levels |
 	    sed -e 's:/.*::')
-	if [ -n "${level}" ]; then
-		sysctl dev.cpu.0.freq="${level}" >/dev/null
+	if [ -n "$level" ]; then
+		sysctl dev.cpu.0.freq="$level" >/dev/null
 	fi
 }

init.d/procfs.in

@@ -1,13 +1,14 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Mounts misc filesystems in /proc."
 
 depend()
 {
+	use modules devfs
 	need localmount
-	keyword noopenvz noprefix novserver
+	keyword -openvz -prefix -vserver -lxc
 }
 
 start()
@@ -24,13 +25,13 @@ start()
 	# while older kernels have 'usbdevfs'.
 	if [ -d /proc/bus/usb -a ! -e /proc/bus/usb/devices ]; then
 		local usbfs=$(grep -Fow usbfs /proc/filesystems ||
-					  grep -Fow usbdevfs /proc/filesystems)
-		if [ -n "${usbfs}" ]; then
-			ebegin "Mounting USB device filesystem [${usbfs}]"
+			grep -Fow usbdevfs /proc/filesystems)
+		if [ -n "$usbfs" ]; then
+			ebegin "Mounting USB device filesystem [$usbfs]"
 			local usbgid="$(getent group usb | \
 				sed -e 's/.*:.*:\(.*\):.*/\1/')"
-			mount -t ${usbfs} \
-				-o ${usbgid:+devmode=0664,devgid=${usbgid},}noexec,nosuid \
+			mount -t $usbfs \
+				-o ${usbgid:+devmode=0664,devgid=$usbgid,}noexec,nosuid \
 				usbfs /proc/bus/usb
 			eend $?
 		fi
@@ -39,7 +40,7 @@ start()
 	# Setup Kernel Support for the NFS daemon status
 	if [ -d /proc/fs/nfsd ] && ! mountinfo -q /proc/fs/nfsd; then
 		if grep -qs nfsd /proc/filesystems; then
-			ebegin "Mounting nfsd filesystem"
+			ebegin "Mounting NFS filesystem"
 			mount -t nfsd -o nodev,noexec,nosuid \
 				nfsd /proc/fs/nfsd
 			eend $?
@@ -47,7 +48,8 @@ start()
 	fi
 
 	# Setup Kernel Support for miscellaneous Binary Formats
-	if [ -d /proc/sys/fs/binfmt_misc ] && ! mountinfo -q /proc/sys/fs/binfmt_misc; then
+	if [ -d /proc/sys/fs/binfmt_misc ] \
+		&& ! mountinfo -q /proc/sys/fs/binfmt_misc; then
 		if grep -qs binfmt_misc /proc/filesystems; then
 			ebegin "Mounting misc binary format filesystem"
 			mount -t binfmt_misc -o nodev,noexec,nosuid \
@@ -56,26 +58,6 @@ start()
 		fi
 	fi
 
-	# Setup Kernel Support for securityfs
-	if [ -d /sys/kernel/security ] && ! mountinfo -q /sys/kernel/security; then
-		if grep -qs securityfs /proc/filesystems; then
-			ebegin "Mounting security filesystem"
-			mount -t securityfs -o nodev,noexec,nosuid \
-				securityfs /sys/kernel/security
-			eend $?
-		fi
-	fi
-
-	# Setup Kernel Support for debugfs
-	if [ -d /sys/kernel/debug ] && ! mountinfo -q /sys/kernel/debug; then
-		if grep -qs debugfs /proc/filesystems; then
-			ebegin "Mounting debug filesystem"
-			mount -t debugfs -o nodev,noexec,nosuid \
-				debugfs /sys/kernel/debug
-			eend $?
-		fi
-	fi
-
 	# Setup Kernel Support for SELinux
 	if [ -d /selinux ] && ! mountinfo -q /selinux; then
 		if grep -qs selinuxfs /proc/filesystems; then

init.d/rarpd.in

@@ -1,28 +1,23 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/rarpd
-command_args="-f ${rarpd_args}"
+command_args="-f $rarpd_args"
 pidfile=/var/run/rarpd.pid
 name="Reverse ARP Daemon"
-required_files="/etc/ethers"
+required_files=/etc/ethers
 
-if [ -z "${rarpd_interface}" ]; then
-	command_args="${command_args} -a"
+if [ -z "$rarpd_interface" ]; then
+	command_args="$command_args -a"
 else
-	command_args="${command_args} ${rarpd_interface}"
+	command_args="$command_args $rarpd_interface"
 fi
-command_background="YES"
+command_background=YES
 
 depend()
 {
 	need localmount
 	after bootmisc
-
-	if [ -z "${rarpd_interface}" ]; then
-		need net
-	else
-		net net."${rarpd_interface}"
-	fi
+	need net
 }

init.d/rc-enabled.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend()
@@ -7,34 +7,35 @@ depend()
 	need localmount net
 	after *
 	before local
-	keyword noprefix
+	keyword -prefix
 }
 
 start()
 {
 	ebegin "Starting local rc services"
-	local svc= enabled= retval=0 service=
-	for svc in $(rcorder /etc/rc.d/* @PKG_PREFIX@/etc/rc.d/* 2>/dev/null); do
+	local svc= enabled= retval=0 service= pkgdir=
+	[ -n "@PKG_PREFIX@" ] && pkgdir="@PKG_PREFIX@/etc/rc.d/*"
+	for svc in $(rcorder /etc/rc.d/* $pkgdir 2>/dev/null); do
 		[ -x "$svc" ] || continue
 		service=${svc##*/}
 
 		# Skip these services
 		for s in cleartmp moused; do
-			[ "${s}" = "${service}" ] && continue 2
+			[ "$s" = "$service" ] && continue 2
 		done
 
 		# If we have an init script for this service, continue
-		rc-service --exists "${service}" && continue
+		rc-service --exists "$service" && continue
 
-		# Ensure that the users rc.conf will start us - ignore the defaults
+		# Ensure that the users rc.conf will start us
 		eval enabled=\$${svc##*/}_enable
-		yesno ${enabled} || yesno ${svc##*/} || continue
+		yesno $enabled || yesno ${svc##*/} || continue
 
 		# Good to go!
-		"$svc" start && started="${started} ${svc}"
+		"$svc" start && started="$started $svc"
 		: $((retval += $?))
 	done
-	service_set_value started "${started}"
+	service_set_value started "$started"
 	eend $retval "Some local rc services failed to start"
 	return 0
 }
@@ -44,7 +45,7 @@ stop()
 	ebegin "Stopping local rc services"
 	local svc= retval=0
 	for svc in $(rcorder $(service_get_value started) 2>/dev/null | sort -r); do
-		"${svc}" stop
+		"$svc" stop
 		: $((retval += $?))
 	done
 	eend $retval "Some local rc services failed to stop"

init.d/root.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Mount the root fs read/write"
@@ -7,18 +7,22 @@ description="Mount the root fs read/write"
 depend()
 {
 	need fsck
-	keyword nojail noopenvz noprefix novserver
+	keyword -jail -openvz -prefix -vserver -lxc
 }
 
 start()
 {
+	case ",$(fstabinfo -o /)," in
+	*,ro,*) return 0;;
+	esac
+
 	if echo 2>/dev/null >/.test.$$; then
 		rm -f /.test.$$ /fastboot /forcefsck
 		return 0
 	fi
 
 	ebegin "Remounting root filesystem read/write"
-	case "${RC_UNAME}" in
+	case "$RC_UNAME" in
 		Linux)	mount -n -o remount,rw /;;
 		*)	mount -u -o rw /;;
 	esac

init.d/rpcbind.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/rpcbind
-command_args=${rpcbind_args}
+command_args=$rpcbind_args
 name="RPC program number mapper"
 
 depend()

init.d/savecache.in

@@ -0,0 +1,32 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Saves the caches OpenRC uses to non volatile storage"
+
+start()
+{
+	if [ -e "$RC_SVCDIR"/clock-skewed ]; then
+		ewarn "WARNING: clock skew detected!"
+		if ! yesno "savecache_skewed"; then
+			eerror "Not saving deptree cache"
+			return 1
+		fi
+	fi
+	ebegin "Saving dependency cache"
+	if [ ! -d "$RC_LIBEXECDIR"/cache ]; then
+		rm -rf "$RC_LIBEXECDIR"/cache
+		if ! mkdir "$RC_LIBEXECDIR"/cache; then
+			eend $?
+			return $?
+		fi
+	fi
+	local save=
+	for x in deptree depconfig shutdowntime softlevel nettree rc.log; do
+		[ -e "$RC_SVCDIR/$x" ] && save="$save $RC_SVCDIR/$x"
+	done
+	if [ -n "$save" ]; then
+		cp -p $save "$RC_LIBEXECDIR"/cache 2>/dev/null
+	fi
+	eend $?
+}

init.d/savecore.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Saves a kernel dump."
@@ -7,30 +7,30 @@ description="Saves a kernel dump."
 depend()
 {
 	need localmount
-	keyword nojail noprefix
+	keyword -jail -prefix
 }
 
 start()
 {
-	local dump_dir=${dump_dir:-/var/crash}
-	if ! [ -d "${dump_dir}" ]; then
-		mkdir -p "${dump_dir}"
-		chmod 700 "${dump_dir}"
+	: ${dump_dir:=/var/crash}
+	if ! [ -d "$dump_dir" ]; then
+		mkdir -p "$dump_dir"
+		chmod 700 "$dump_dir"
 	fi
 
-	if [ "${RC_UNAME}" = "FreeBSD" ]; then
+	if [ "$RC_UNAME" = FreeBSD ]; then
 		# Don't quote ${dump_device}, so that if it's unset,
 		# savecore will check on the partitions listed in fstab
 		# without errors in the output
-		savecore -C "${dump_dir}" ${dump_device} >/dev/null
+		savecore -C "$dump_dir" $dump_device >/dev/null
 	else
-		ls "${dump_dir}"/bsd* > /dev/null 2>&1
+		ls "$dump_dir"/bsd* > /dev/null 2>&1
 	fi
 	[ $? = 0 ] || return 0
 
-	local sopts="${dump_dir} ${dump_device}"
-	yesno ${dump_compress} && sopts="-z ${sopts}"
-	ebegin "Saving kernel core dump in ${dump_dir}"
-	savecore ${sopts} >/dev/null
+	local sopts="$dump_dir $dump_device"
+	yesno $dump_compress && sopts="-z $sopts"
+	ebegin "Saving kernel core dump in $dump_dir"
+	savecore $sopts >/dev/null
 	eend $?
 }

init.d/staticroute.in

@@ -0,0 +1,73 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+# This script was inspired by the equivalent rc.d staticroute from NetBSD.
+
+description="Configures static routes."
+__nl="
+"
+
+depend()
+{
+	provide net
+	use network
+	keyword -jail -prefix -vserver
+}
+
+dump_args()
+{
+	if [ -s /etc/route.conf ]; then
+		cat /etc/route.conf
+	else
+		case "$staticroute" in
+		*"$__nl"*)
+			echo "$staticroute"
+			;;
+		*)
+			(
+		 		set -o noglob
+				IFS=';'; set -- $staticroute
+				IFS="$__nl"; echo "$*"
+			)
+			;;
+		esac
+	fi
+}
+
+do_routes()
+{
+	local xtra=
+	[ "$RC_UNAME" != Linux ] && xtra=-q
+
+	ebegin "$1 static routes"
+	dump_args | while read args; do
+		[ -z "$args" ] && continue
+		case "$args" in
+		"#"*)
+			;;
+		"+"*)
+			[ $2 = "add" ] && eval ${args#*+}
+			;;
+		"-"*)
+			[ $2 = "del" -o $2 = "delete" ] && eval ${args#*-}
+			;;
+		*)
+			route $xtra $2 -$args
+			;;
+		esac
+	done
+	eend 0
+}
+
+start()
+{
+	do_routes "Adding" "add"
+}
+
+stop()
+{
+	local cmd="delete"
+	[ "$RC_UNAME" = Linux ] && cmd="del"
+	do_routes "Deleting" "$cmd"
+}

init.d/swap-blk.in

@@ -1,11 +1,11 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {
 	before fsck
-	keyword nojail noprefix
+	keyword -jail -prefix
 }
 
 start()

init.d/swap.in

@@ -1,17 +1,17 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {
 	need localmount
-	keyword nojail noopenvz noprefix novserver
+	keyword -jail -openvz -prefix -vserver -lxc
 }
 
 start()
 {
 	ebegin "Activating swap devices"
-	case "${RC_UNAME}" in
+	case "$RC_UNAME" in
 		NetBSD|OpenBSD) swapctl -A -t noblk >/dev/null;;
 		*)		swapon -a >/dev/null;;
 	esac
@@ -21,7 +21,13 @@ start()
 stop()
 {
 	ebegin "Deactivating swap devices"
-	case "${RC_UNAME}" in
+
+	# Try to unmount all tmpfs filesystems not in use, else a deadlock may
+	# occure. As $RC_SVCDIR may also be tmpfs we cd to it to lock it
+	cd "$RC_SVCDIR"
+	umount -a -t tmpfs 2>/dev/null
+
+	case "$RC_UNAME" in
 		NetBSD|OpenBSD)	swapctl -U -t noblk >/dev/null;;
 		*)		swapoff -a >/dev/null;;
 	esac

init.d/swclock.in

@@ -0,0 +1,28 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Sets the local clock to the mtime of a given file."
+
+depend()
+{
+	before *
+	provide clock
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
+}
+
+# swclock is an OpenRC built in
+
+start()
+{
+	ebegin "Setting the local clock based on last shutdown time"
+	swclock --warn
+	eend $?
+}
+
+stop()
+{
+	ebegin "Saving the shutdown time"
+	swclock --save
+	eend $?
+}

init.d/syscons.in

@@ -1,36 +1,36 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend() {
 	need localmount
-	keyword nojail noprefix
+	keyword -jail -prefix
 }
 
 start() {
-	if [ -n "${allscreen_flags}" ]; then
-		ebegin "Setting mode to ${allscreen_flags} for all screens"
+	if [ -n "$allscreen_flags" ]; then
+		ebegin "Setting mode to $allscreen_flags for all screens"
 		for v in /dev/ttyv*; do
-			vidcontrol ${allscreen_flags} <"${v}"
+			vidcontrol $allscreen_flags <$v
 		done
 		eend $?
 	fi
 	
-	if [ -n "${keymap}" ]; then
-		ebegin "Setting keymap to ${keymap}"
-		kbdcontrol -l ${keymap} </dev/console
+	if [ -n "$keymap" ]; then
+		ebegin "Setting keymap to $keymap"
+		kbdcontrol -l $keymap </dev/console
 		eend $?
 	fi
 	
-	if [ -n "${keyrate}" ]; then
-		ebegin "Setting keyrate to ${keyrate}"
-		kbdcontrol -r ${keyrate} </dev/console
+	if [ -n "$keyrate" ]; then
+		ebegin "Setting keyrate to $keyrate"
+		kbdcontrol -r $keyrate </dev/console
 		eend $?
 	fi
 
-	if [ -n "${keychange}" ]; then
+	if [ -n "$keychange" ]; then
 		ebegin "Changing function keys"
-		eval set -- "${keychange}"
+		eval set -- "$keychange"
 		eindent
 		while [ $# -gt 0 ]; do
 			veinfo "F$1 -> \`$2'"
@@ -41,40 +41,40 @@ start() {
 		eoutdent
 	fi
 	
-	if [ -n "${cursor}" ]; then
+	if [ -n "$cursor" ]; then
 		ebegin "Setting cursor"
-		vidcontrol -c ${cursor}
+		vidcontrol -c $cursor
 		eend $?
 	fi
 
 	local v= f=
 	for v in font8x16 font8x14 font8x8; do
-		eval f=\$${v}
-		if [ -n "${f}" ]; then
-			ebegin "Setting font ${f}"
-			vidcontrol -f ${v##font} ${f}
+		eval f=\$$v
+		if [ -n "$f" ]; then
+			ebegin "Setting font $f"
+			vidcontrol -f ${v##font} $f
 			eend $?
 		fi
 	done
 
-	if [ -n "${blanktime}" ]; then
+	if [ -n "$blanktime" ]; then
 		ebegin "Setting blanktime"
-		vidcontrol -t ${blanktime}
+		vidcontrol -t $blanktime
 		eend $?
 	fi
 
-	if [ -n "${saver}" ]; then
+	if [ -n "$saver" ]; then
 		local i=
 		for i in $(kldstat | sed -n -e 's/.* \(splash_.*\)/\1/p'); do
-			kldunload "${i}"
+			kldunload "$i"
 		done
 		kldstat -v | grep -q _saver || kldload ${saver}_saver
 	fi
 
-	if [ -n "${kbdflags}" ]; then
+	if [ -n "$kbdflags" ]; then
 		ebegin "Setting keyboard flags for all screens"
 		for v in /dev/ttyv*; do
-			kbdcontrol ${kbdflags} <${v}
+			kbdcontrol $kbdflags <$v
 		done
 		eend $?
 	fi

init.d/sysctl.BSD.in

@@ -1,24 +1,32 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {
 	use hostname
 	before bootmisc logger
-	keyword noprefix
+	keyword -prefix
 }
 
 start()
 {
 	[ -e /etc/sysctl.conf ] || return 0
-	local retval=0 var= comments=
+	local retval=0 var= comments= conf=
 	ebegin "Configuring kernel parameters"
-	while read var comments; do
-		case "${var}" in
-			""|"#"*) continue;;
-		esac
-		sysctl -w "${var}" >/dev/null || retval=1
-	done < /etc/sysctl.conf
-	eend ${retval} "Some errors were encountered"
+	eindent
+	for conf in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
+		if [ -r "$conf" ]; then
+			vebegin "applying $conf"
+			while read var comments; do
+				case "$var" in
+				""|"#"*) continue;;
+				esac
+				sysctl -w "$var" >/dev/null || retval=1
+			done < "$conf"
+			veend $retval
+		fi
+	done
+	eoutdent
+	eend $retval "Some errors were encountered"
 }

init.d/sysctl.Linux.in

@@ -1,18 +1,26 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {
 	use hostname
 	before bootmisc logger
-	keyword noopenvz noprefix novserver
+	keyword -openvz -prefix -vserver
 }
 
 start()
 {
-	[ -e /etc/sysctl.conf ] || return 0
+	local conf= retval=0
 	ebegin "Configuring kernel parameters"
-	sysctl -p >/dev/null
-	eend $? "Some errors were encountered"
+	eindent
+	for conf in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
+		if [ -r "$conf" ]; then
+			vebegin "applying $conf"
+			sysctl -p "$conf" >/dev/null
+			veend $? || retval=1
+		fi
+	done
+	eoutdent
+	eend $retval "Some errors were encountered"
 }

init.d/sysfs.in

@@ -0,0 +1,64 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Mount the sys filesystem."
+
+depend()
+{
+	keyword -prefix -vserver
+}
+
+mount_sys()
+{
+	grep -Eq "[[:space:]]+sysfs$" /proc/filesystems || return 1
+	mountinfo -q /sys && return 0
+
+	if [ ! -d /sys ]; then
+		if ! mkdir -m 0755 /sys; then
+			ewarn "Could not create /sys!"
+			return 1
+		fi
+	fi
+
+	ebegin "Mounting /sys"
+	if ! fstabinfo --mount /sys; then
+		mount -n -t sysfs -o noexec,nosuid,nodev sysfs /sys
+	fi
+	eend $?
+}
+
+mount_misc()
+{
+	# Setup Kernel Support for securityfs
+	if [ -d /sys/kernel/security ] && \
+		! mountinfo -q /sys/kernel/security; then
+		if grep -qs securityfs /proc/filesystems; then
+			ebegin "Mounting security filesystem"
+			mount -n -t securityfs -o nodev,noexec,nosuid \
+				securityfs /sys/kernel/security
+			eend $?
+		fi
+	fi
+
+	# Setup Kernel Support for debugfs
+	if [ -d /sys/kernel/debug ] && ! mountinfo -q /sys/kernel/debug; then
+		if grep -qs debugfs /proc/filesystems; then
+			ebegin "Mounting debug filesystem"
+			mount -n -t debugfs -o nodev,noexec,nosuid \
+				debugfs /sys/kernel/debug
+			eend $?
+		fi
+	fi
+}
+
+start()
+{
+	local retval
+	mount_sys
+	retval=$?
+	if [ $retval -eq 0 ]; then
+		mount_misc
+	fi
+	return $retval
+}

init.d/syslogd.in

@@ -1,10 +1,10 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/syslogd
-command_args=${syslogd_args}
-case "${RC_UNAME}" in
+command_args=$syslogd_args
+case "$RC_UNAME" in
 	FreeBSD|DragonFly)	pidfile=/var/run/syslog.pid;;
 	*)			pidfile=/var/run/syslogd.pid;;
 esac
@@ -16,5 +16,5 @@ depend()
 	use net newsyslog
 	need localmount
 	after bootmisc
-	keyword noprefix
+	keyword -prefix
 }

init.d/termencoding.in

@@ -1,15 +1,15 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2008-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Configures terminal encoding."
 
 ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
-unicode=${unicode:-${UNICODE}}
+: ${unicode:=${UNICODE}}
 
 depend()
 {
-	keyword noopenvz noprefix nouml novserver noxenu
+	keyword -openvz -prefix -uml -vserver -xenu
 }
 
 start()
@@ -25,11 +25,11 @@ start()
 		termmsg="UTF-8"
 	fi
 
-	ebegin "Setting terminal encoding [${termmsg}]"
+	ebegin "Setting terminal encoding [$termmsg]"
 	n=1
-	while [ ${n} -le "${ttyn}" ]; do
-		printf "\033%s" "${termencoding}" >"${ttydev}${n}"
-		n=$((${n} + 1))
+	while [ ${n} -le "$ttyn" ]; do
+		printf "\033%s" "$termencoding" >$ttydev$n
+		n=$(($n + 1))
 	done
 	eend 0
 }

init.d/ttys.in

@@ -1,11 +1,11 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend() 
 {
 	after fsck
-	keyword noprefix
+	keyword -prefix
 }
 
 start()

init.d/urandom.in

@@ -1,15 +1,14 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
-urandom_seed=${urandom_seed:-${URANDOM_SEED:-/var/run/random-seed}}
-
+: ${urandom_seed:=${URANDOM_SEED:-/var/run/random-seed}}
 description="Initializes the random number generator."
 
 depend()
 {
 	need localmount
-	keyword nojail noprefix
+	keyword -jail -openvz -prefix
 }
 
 save_seed()
@@ -22,19 +21,19 @@ save_seed()
 
 	(	# sub shell to prevent umask pollution
 		umask 077
-		dd if=/dev/urandom of="${urandom_seed}" count=${psz} 2>/dev/null
+		dd if=/dev/urandom of="$urandom_seed" count=${psz} 2>/dev/null
 	)
 }
 
 start()
 {
 	[ -c /dev/urandom ] || return
-	if [ -f "${urandom_seed}" ]; then
+	if [ -f "$urandom_seed" ]; then
 		ebegin "Initializing random number generator"
-		cat "${urandom_seed}" > /dev/urandom
+		cat "$urandom_seed" > /dev/urandom
 		eend $? "Error initializing random number generator"
 	fi
-	rm -f "${urandom_seed}" && save_seed
+	rm -f "$urandom_seed" && save_seed
 	return 0
 }
 

init.d/wscons.in

@@ -1,11 +1,11 @@
 #!@PREFIX@/sbin/runscript
-# Copyright 2008 Roy Marples <roy@marples.name>
+# Copyright (c) 2008-2009 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {
 	need localmount
-	keyword noprefix
+	keyword -prefix
 }
 
 start()
@@ -19,82 +19,82 @@ start()
 	#	screen idx scr emul
 	#	font   name width height enc file
 	while read type arg1 arg2 arg3 arg4 arg5; do
-		case "${type}" in
+		case "$type" in
 			\#*|"")
 				continue
 				;;
 
 			font)
-				cmd=${wsfld}
-				[ "${arg2}" != "-" ] && cmd="${cmd} -w ${arg2}"
-				[ "${arg3}" != "-" ] && cmd="${cmd} -h ${arg3}" 
-				[ "${arg4}" != "-" ] && cmd="${cmd} -e ${arg4}"
-				cmd="${cmd} -N ${arg1} ${arg5}"
-				eval "${cmd}"				
+				cmd=$wsfld
+				[ "$arg2" != "-" ] && cmd="$cmd -w $arg2"
+				[ "$arg3" != "-" ] && cmd="$cmd -h $arg3" 
+				[ "$arg4" != "-" ] && cmd="$cmd -e $arg4"
+				cmd="$cmd -N $arg1 $arg5"
+				eval "$cmd"				
 				;;
 
 			screen)
-				cmd=${wscfg}
-				[ "${arg2}" != "-" ] && cmd="${cmd} -t ${arg2}"
-				[ "${arg3}" != "-" ] && cmd="${cmd} -e ${arg3}"
-				cmd="${cmd} ${arg1}"
-				eval "${cmd}"
+				cmd=$wscfg
+				[ "$arg2" != "-" ] && cmd="$cmd -t $arg2"
+				[ "$arg3" != "-" ] && cmd="$cmd -e $arg3"
+				cmd="$cmd $arg1"
+				eval "$cmd"
 				;;
 
 			keyboard)
-				cmd=${wscfg}
-				case "${arg1}" in
+				cmd=$wscfg
+				case "$arg1" in
 					-|auto)
-						cmd="${cmd} -k"
+						cmd="$cmd -k"
 						;;
 					*)
-						cmd="${cmd} -k ${arg1}"
+						cmd="$cmd -k $arg1"
 						;;
 				esac
-				${cmd}
+				$cmd
 				;;
 
 			encoding)
-				eval ${wsctl} -w "\"encoding=${arg1}\""
+				eval $wsctl -w "\"encoding=$arg1\""
 				;;
 
 			mapfile)
 				local entry=
 				while read entry; do
-					case "${entry}" in
+					case "$entry" in
 					\#*|"")
 						continue
 						;;
 					*)
-						cmd="${wsctl} -w \"map+=${entry}\""
-						eval "${cmd} >/dev/null"
+						cmd="$wsctl -w \"map+=$entry\""
+						eval "$cmd >/dev/null"
 						;;
 					esac
-				done < "${arg1}"
+				done < "$arg1"
 				;;
 
 			mux)
-				eval "${wscfg} -m ${arg1}"
+				eval "$wscfg -m $arg1"
 				;;
 
 			setvar)
-				case "${arg1}" in
+				case "$arg1" in
 				keyboard)
-					cmd="${wsctl} -kw ${arg2}"
+					cmd="$wsctl -kw $arg2"
 					;;
 				display)
-					cmd="${wsctl} -dw ${arg2}"
+					cmd="$wsctl -dw $arg2"
 					;;
 				mouse)
-					cmd="${wsctl} -mw ${arg2}"
+					cmd="$wsctl -mw $arg2"
 					;;
 				*)
-					cmd="${wsctl} -w ${arg1}"
+					cmd="$wsctl -w $arg1"
 					;;
 				esac
-				eval "${cmd}"
+				eval "$cmd"
 				;;
 
 		esac
-	done < "${config}"
+	done < "$config"
 }

man/einfo.3

@@ -1,4 +1,4 @@
-.\" Copyright 2007-2008 Roy Marples
+.\" Copyright (c) 2007-2008 Roy Marples
 .\" All rights reserved
 .\"
 .\" Redistribution and use in source and binary forms, with or without

man/rc-service.8

@@ -1,4 +1,4 @@
-.\" Copyright 2008 Roy Marples
+.\" Copyright (c) 2008-2009 Roy Marples
 .\" All rights reserved
 .\"
 .\" Redistribution and use in source and binary forms, with or without
@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd Mar 26, 2008
+.Dd May 1, 2009
 .Dt RC-SERVICE 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -30,20 +30,26 @@
 .Nd locate and run an OpenRC service with the given arguments 
 .Sh SYNOPSIS
 .Nm
+.Op Fl i , -ifexists
 .Ar service cmd
 .Op Ar ...
 .Nm
-.Fl l , -list
-.Nm
 .Fl e , -exists
 .Ar service
 .Nm
+.Fl l , -list
+.Nm
 .Fl r , -resolve
 .Ar service
 .Sh DESCRIPTION
 Service scripts could be in different places on different systems. 
 .Nm
 locates the specified service and runs it with the given arguments.
+If
+.Fl i , -ifexists
+is given then
+.Nm
+returns 0 even if the service does not exist.
 .Pp
 If given the
 .Fl l , -list
@@ -51,14 +57,14 @@ argument then
 .Nm
 will list all available services.
 .Pp
-.Fl -e , exists
+.Fl e , -exists
 return 0 if it can find
 .Ar service ,
 otherwise -1.
-.Fl -r , resolve
+.Fl r , -resolve
 does the same and also prints the full path of the service to stdout.
 .Sh SEE ALSO
 .Xr rc 8 ,
 .Xr stdout 3
 .Sh AUTHORS
-.An Roy Marples" <roy@marples.name>
+.An Roy Marples <roy@marples.name>

man/rc-status.8

@@ -1,4 +1,4 @@
-.\" Copyright 2007-2008 Roy Marples
+.\" Copyright (c) 2007-2009 Roy Marples
 .\" All rights reserved
 .\"
 .\" Redistribution and use in source and binary forms, with or without
@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd Arp 9, 2008
+.Dd April 24, 2008
 .Dt RC-STATUS 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -30,7 +30,7 @@
 .Nd show status info about runlevels
 .Sh SYNOPSIS
 .Nm
-.Op Fl alsuC
+.Op Fl aclsuC
 .Op Ar runlevel
 .Sh DESCRIPTION
 .Nm
@@ -43,6 +43,8 @@ The options are as follows:
 .Bl -tag -width ".Fl test , test string"
 .It Fl a , -all
 Show all runlevels and their services.
+.It Fl c , -crashed
+List all services that have crashed.
 .It Fl l , -list
 List all defined runlevels.
 .It fl r , -runlevel
@@ -57,8 +59,11 @@ Disable color output.
 Show information only for the named
 .Ar runlevel .
 .El
+.Sh EXIT STATUS
+.Nm
+exits 0, except when checking for crashed services and it doesn't find any.
 .Sh SEE ALSO
 .Xr rc 8 ,
 .Xr rc-update 8
 .Sh AUTHORS
-.An Roy Marples" <roy@marples.name>
+.An Roy Marples <roy@marples.name>

man/rc-update.8

@@ -1,4 +1,4 @@
-.\" Copyright 2007-2008 Roy Marples
+.\" Copyright (c) 2007-2009 Roy Marples
 .\" All rights reserved
 .\"
 .\" Redistribution and use in source and binary forms, with or without
@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd Jan 15, 2008
+.Dd May 2, 2009
 .Dt RC-UPDATE 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -30,14 +30,17 @@
 .Nd add and remove services to and from a runlevel 
 .Sh SYNOPSIS
 .Nm
+.Op Fl s , -stack
 .Ar add
 .Ar service
 .Op Ar runlevel ...
 .Nm
+.Op Fl s , -stack
 .Ar delete
 .Ar service
 .Op Ar runlevel ...
 .Nm
+.Op Fl u , -update
 .Op Fl v , -verbose
 .Ar show
 .Op Ar runlevel ...
@@ -50,10 +53,11 @@ All services must reside in the
 .Pa /etc/init.d
 or
 .Pa /usr/local/etc/init.d
-directories. They must also conform to the OpenRC runscript standard.
+directories.
+They must also conform to the OpenRC runscript standard.
 .Pp
 .Bl -tag -width "Fl a , -delete service"
-.It Fl a , -add Ar service
+.It Ar add Ar service
 Add the
 .Ar service
 to the
@@ -72,9 +76,18 @@ Show all enabled services and the runlevels they belong to.  If you specify
 runlevels to show, then only those will be included in the output.
 .It Fl v , -verbose
 Show all services.
+.It Fl u , -update
+Forces an update of the dependency tree cache.
+This may be needed in the event of clock skew (a file in /etc is newer than the
+system clock).
 .El
+.Pp
+If the
+.Fl s , -stack
+option is given then we either add or remove the runlevel from the runlevel.
+This allows inheritance of runlevels.
 .Sh SEE ALSO
 .Xr rc 8 ,
 .Xr rc-status 8
 .Sh AUTHORS
-.An Roy Marples" <roy@marples.name>
+.An Roy Marples <roy@marples.name>