release openrc-0.6.7

Under normal conditions, runscript creates one child and waits for its
termination, which is signaled by a pipe write from the SIGCHLD
sighandler.

When running killprocs however more than one SIGHCLD signal is generated, at
least on all of my amd64 boxes running on real hardware and in vmware.

When the first SIGCHLD occurs svc_exec leaves the loop and closes the pipe.
Subsequent SIGCHLDs during the close can lead to a race condition and create an
EBADF error in the pipe write (pipe is closed but the file handle is still !=
-1).

We avoid this by blocking SIGHCHLD during the pipe close.

Makefile

@@ -4,7 +4,7 @@
 
 include Makefile.inc
 
-SUBDIR=		conf.d etc init.d man sh src
+SUBDIR=		conf.d etc init.d man scripts sh src
 
 # Build our old net foo or not
 _OLDNET_SH=	case "${MKOLDNET}" in \

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.5.1
+VERSION=	0.6.7
 PKG=		${NAME}-${VERSION}

README

@@ -41,7 +41,7 @@ If any of the following files exist then we do not overwrite them
 rc and rc.shutdown are the hooks from the BSD init into OpenRC.
 devd.conf is modified from FreeBSD to call /etc/rc.devd which is a generic
 hook into OpenRC.
-inittab is the same, but for SysVInit as used by most Linux distrubtions.
+inittab is the same, but for SysVInit as used by most Linux distributions.
 This can be found in the support folder.
 Obviously, if you're installing this onto a system that does not use OpenRC
 by default then you may wish to backup the above listed files, remove them
@@ -58,14 +58,15 @@ If you installed OpenRC from your chosen distribution, you should report
 bugs directly to them. For example, if you use Gentoo and emerged OpenRC
 then you should reports bugs to http://bugs.gentoo.org.
 
-Otherwise, you can report them directly to me at http://bugs.marples.name
+Otherwise, you can report them directly to me at
+http://roy.marples.name/projects/openrc
 
 
 History - by Roy Marples
 ------------------------
 I became a Gentoo/Linux developer in 2004 and wrote the modular network
 scripts for the Gentoo baselayout package. baselayout is a collection of
-bash scripts to bring up your computer and it's services.
+bash scripts to bring up your computer and its services.
 Then towards the end of 2005 I found myself as the primary maintainer
 for baselayout.
 

README.net

@@ -0,0 +1,36 @@
+OpenRC Network Ideals
+---------------------
+
+The new style networking for OpenRC is very simplistic - provide a basic means
+of configuring static interface address and routes whilst allowing the
+possibility to run any command at any point.
+
+In a nutshell, init.d/network is a wrapper around ifconfig(8) and
+init.d/staticroute is wrapper around route(8).
+
+In the Perfect World (TM) ifconfig should be able to configure everything
+about the interface easily * . The BSD family almost get this right and Linux
+epically fails.
+
+* Only static configuration, including link setup.
+For dynamic, static, IPv4LL, arping and per ssid IPv4 setup dhcpcd-5.x
+provides your needs.
+
+It fails because there are many tools to do the same job and often have
+vastly different syntax where they could be similar. In other words, there
+is no coherence.
+
+OpenRC-0.4.x and older (inc Gentoo baselayout-1) had a collection of scripts
+for each tool and allowed a script per interface. Over the years, this design
+has proven very hard to maintain as each user has their own idea of how
+things should work. Also, there were (and still are) race conditions.
+
+So where do we go from here?
+Well, it's possible to use the new network scripts using the tools
+currently available. It's just harder as you have to know them and their
+documentation can be lacking at times.
+The correct end goal is a BSD style ifconfig tool.
+I've started work on it, but the project has stalled somewhat.
+It's display only right now and the source is not yet publicly available.
+If you have the skills and share the vision then contact me privately and
+we'll take it from there.

conf.d/.gitignore

@@ -1 +1,2 @@
 network
+staticroute

conf.d/Makefile

@@ -1,14 +1,19 @@
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname local localmount network urandom
+CONF=	bootmisc fsck hostname local localmount network staticroute urandom
 
-TARGETS+=	network
-CLEANFILES+=	network
+TARGETS+=	network staticroute
+CLEANFILES+=	network staticroute
 
 MK=	../mk
 include ${MK}/os.mk
 include Makefile.${OS}
 include ${MK}/scripts.mk
 
-network: network.in network.${OS}
-	cp network.in network
-	[ -e network.${OS} ] && cat network.${OS} >> network || true
+SOS?=	BSD
+
+network: network.in network.${SOS}
+	cp $@.in $@
+	[ -e $@.${SOS} ] && cat $@.${SOS} >> $@ || true
+
+staticroute: staticroute.${SOS}
+	cp $@.${SOS} $@

conf.d/Makefile.FreeBSD

@@ -1,3 +1 @@
 CONF+=	ipfw moused powerd rarpd savecore syscons
-
-network.${OS}:

conf.d/Makefile.Linux

@@ -1 +1,2 @@
 CONF+=	consolefont dmesg hwclock keymaps modules
+SOS=	Linux

conf.d/Makefile.NetBSD

@@ -1,3 +1 @@
 CONF+=	moused rarpd savecore
-
-network.${OS}:

conf.d/fsck

@@ -13,6 +13,11 @@
 #fsck_passno=">1"
 #fsck_passno="<2"
 
+# Most modern fs's don't require a full fsck on boot, but for those that do
+# it may be advisable to skip this when running on battery.
+# WARNING: Do not turn this off if you have any JFS partitions.
+fsck_on_battery="YES"
+
 # fsck_shutdown causes fsck to trigger during shutdown as well as startup.
 # The end result of this is that if any periodic non-root filesystem checks are
 # scheduled, under normal circumstances the actual check will happen during

conf.d/hwclock

@@ -1,11 +1,11 @@
-# Set CLOCK to "UTC" if your system clock is set to UTC (also known as
-# Greenwich Mean Time).  If your clock is set to the local time, then 
+# Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
+# Greenwich Mean Time).  If that clock is set to the local time, then 
 # set CLOCK to "local".  Note that if you dual boot with Windows, then 
 # you should set it to "local".
 clock="UTC"
 
 # If you want to set the Hardware Clock to the current System Time 
-# during shutdown, then say "YES" here.
+# (software clock) during shutdown, then say "YES" here.
 # You normally don't need to do this if you run a ntp daemon.
 clock_systohc="NO"
 

conf.d/network.BSD

@@ -0,0 +1,4 @@
+
+# You can assign a default route
+#defaultroute="192.168.0.1"
+#defaultroute6="2001:a:b:c"

conf.d/network.Linux

@@ -1,8 +1,20 @@
+
+# You can assign a default route
+#defaultroute="gw 192.168.0.1"
+#defaultroute6="gw 2001:a:b:c"
+
 # ifconfig under Linux is not that powerful and doesn't easily handle
 # multiple addresses
 # On the other hand, ip (iproute2) is quite powerful and is also supported
 #ip_eth0="192.168.0.10/24; 192.168.10.10/24"
 
+# You can also use ip to add the default route.
+#defaultiproute="via 192.168.0.1"
+#defaultiproute6="via 2001:a:b:c"
+
+# ip doesn't handle MTU like ifconfig, but we can do it like so
+#ifup_eth0="ip link set \$int mtu 1500"
+
 # Create a bonded interface
 #interfaces="bond0"
 #ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"

conf.d/network.in

@@ -9,8 +9,6 @@
 # You should note that we don't stop the network at system shutdown by default.
 # If you really need this, then set shutdown_network=YES
 
-# You can assign a default route
-#defaultroute="192.168.0.1"
 # Lastly, the interfaces variable pulls in virtual interfaces that cannot
 # be automatically detected.
 #interfaces="br0 bond0 vlan0"
@@ -26,3 +24,5 @@
 # If you require DHCP, you should install dhcpcd and it to the boot or
 # default runlevel.
 
+# NIS users can set the domain name here
+#domainname="foobar"

conf.d/staticroute.BSD

@@ -0,0 +1,6 @@
+# Separate multiple routes using ; or new lines.
+# /etc/route.conf(5) takes precedence over this configuration.
+
+# Example static routes. See route(8) for syntax.
+#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
+#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.Linux

@@ -0,0 +1,8 @@
+# Separate multiple routes using ; or new lines.
+
+# Example static routes. See route(8) for syntax.
+#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
+#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
+
+# Example static routes using iproute2. See ip(8) for syntax.
+#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"

doc/net.example.BSD.in

@@ -12,7 +12,7 @@
 # kernel then remove the IPv6 address from your config.
 
 # If you want to use a static address or use DHCP explicitly, jump
-# down to the section labelled INTERFACE HANDLERS.
+# down to the section labeled INTERFACE HANDLERS.
 #
 # If you want to do anything more fancy, you should take the time to
 # read through the rest of this file.
@@ -22,10 +22,10 @@
 #
 # We now support modular networking scripts which means we can easily
 # add support for new interface types and modules while keeping
-# compatability with existing ones.
+# compatibility with existing ones.
 # 
 # Modules load by default if the package they need is installed.  If
-# you specify a module here that doesn't have it's package installed
+# you specify a module here that doesn't have its package installed
 # then you get an error stating which package you need to install.
 # Ideally, you only use the modules setting when you have two or more
 # packages installed that supply the same service.
@@ -43,11 +43,6 @@
 #       (eth0:1, eth0:2, etc)
 #       iproute2 does not do this as there is no need to
 #config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
-# Or you can use sequence expressions
-#config_eth0="192.168.0.{2..4}/24"  FIXME - may not work with baselayout2
-# which does the same as above. Be careful though as if you use this and
-# fallbacks, you have to ensure that both end up with the same number of
-# values otherwise your fallback won't work correctly.
 
 # You can also use IPv6 addresses
 # (you should always specify a prefix length with IPv6 here)
@@ -101,8 +96,8 @@
 #modules="iwconfig"
 
 # ifconfig (iwconig) support is a one shot script - wpa_supplicant is daemon
-# that scans, assoicates and re-configures if assocation is lost.
-# We call it iwconfig to seperate the wireless setup from ifconfig.
+# that scans, associates and re-configures if association is lost.
+# We call it iwconfig to separate the wireless setup from ifconfig.
 ####################################
 # HINTS
 #
@@ -187,7 +182,7 @@
 #dns_servers_001122334455="192.168.0.1 192.168.0.2"
 
 # Map a MAC address to an SSID
-# This is used when the Access Point is not broadcasting it's SSID
+# This is used when the Access Point is not broadcasting its SSID
 # WARNING: This will override the SSID being broadcast due to some
 # Access Points sending an SSID even when they have been configured
 # not to!
@@ -198,7 +193,7 @@
 # This lists the preferred SSIDs to connect to in order
 # SSID's can contain any characters here as they must match the broadcast
 # SSID exactly.
-# Surround each SSID with the " character and seperate them with a space
+# Surround each SSID with the " character and separate them with a space
 # If the first SSID isn't found then it moves onto the next
 # If this isn't defined then it connects to the first one found
 #preferred_aps="SSID1 SSID2"
@@ -213,9 +208,9 @@
 # any other available AP
 # "preferredonly" means it will only connect to visible APs in the preferred
 # list
-# "forcepreferred" means it will forceably connect to APs in order if it does
+# "forcepreferred" means it will forcibly connect to APs in order if it does
 # not find them in a scan
-# "forcepreferredonly" means it forceably connects to the APs in order and
+# "forcepreferredonly" means it forcibly connects to the APs in order and
 # does not bother to scan
 # "forceany" does the same as forcepreferred + connects to any other 
 # available AP
@@ -242,12 +237,12 @@
 
 ##################################################
 # wpa_supplicant
-# emerge net-wireless/wpa-supplicant
+# emerge net-wireless/wpa_supplicant
 # Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Console the wpa_supplicant.conf.example that is installed in
+# Consult the wpa_supplicant.conf.example that is installed in
 # /usr/share/doc/wpa_supplicant
 
-# By default we don't wait for wpa_suppliant to associate and authenticate.
+# By default we don't wait for wpa_supplicant to associate and authenticate.
 # If you would like to, so can specify how long in seconds
 #associate_timeout_eth0=60
 # A value of 0 means wait forever.
@@ -325,7 +320,7 @@
 # Set generic DHCP options like so
 #dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
 
-# This tells the dhcp client to release it's lease when it stops, not to
+# This tells the dhcp client to release its lease when it stops, not to
 # overwrite dns, ntp and nis settings, not to set a default route and not to
 # send the current hostname to the dhcp server and when it starts.
 # You can use any combination of the above options - the default is not to

doc/net.example.Linux.in

@@ -12,7 +12,7 @@
 # kernel then remove the IPv6 address from your config.
 
 # If you want to use a static address or use DHCP explicitly, jump
-# down to the section labelled INTERFACE HANDLERS.
+# down to the section labeled INTERFACE HANDLERS.
 #
 # If you want to do anything more fancy, you should take the time to
 # read through the rest of this file.
@@ -23,10 +23,10 @@
 #
 # We now support modular networking scripts which means we can easily
 # add support for new interface types and modules while keeping
-# compatability with existing ones.
+# compatibility with existing ones.
 # 
 # Modules load by default if the package they need is installed.  If
-# you specify a module here that doesn't have it's package installed
+# you specify a module here that doesn't have its package installed
 # then you get an error stating which package you need to install.
 # Ideally, you only use the modules setting when you have two or more
 # packages installed that supply the same service.
@@ -70,11 +70,6 @@
 #       iproute2 does not do this as there is no need to
 #config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
 # However, that only works with CIDR addresses, so you can't use netmask.
-# Or you can use sequence expressions
-#config_eth0="192.168.0.{2..4}/24"
-# which does the same as above. Be careful though as if you use this and
-# fallbacks, you have to ensure that both end up with the same number of
-# values otherwise your fallback won't work correctly.
 
 # You can also use IPv6 addresses
 # (you should always specify a prefix length with IPv6 here)
@@ -111,7 +106,7 @@
 
 # Each module described below can set a default base metric, lower is
 # preferred over higher. This is so we can prefer a wired route over a
-# wireless route automaticaly. You can override this by setting
+# wireless route automatically. You can override this by setting
 #metric_eth0="100"
 # or on a global basis
 #metric="100"
@@ -258,7 +253,7 @@
 #key_SSID="s:foobar enc open"
 #key_SSID="1234-5678-9012 enc open"
 
-# You may want to set muliple keys - here's an example
+# You may want to set multiple keys - here's an example
 # It sets 4 keys on the card and instructs to use key 2 by default
 #key_SSID="[1] s:passkey1 key [2] s:passkey2 key [3] s:passkey3 key [4] s:passkey4 key [2]"
 
@@ -288,7 +283,7 @@
 #dns_servers_001122334455="192.168.0.1 192.168.0.2"
 
 # Map a MAC address to an SSID
-# This is used when the Access Point is not broadcasting it's SSID
+# This is used when the Access Point is not broadcasting its SSID
 # WARNING: This will override the SSID being broadcast due to some
 # Access Points sending an SSID even when they have been configured
 # not to!
@@ -299,7 +294,7 @@
 # This lists the preferred SSIDs to connect to in order
 # SSID's can contain any characters here as they must match the broadcast
 # SSID exactly.
-# Surround each SSID with the " character and seperate them with a space
+# Surround each SSID with the " character and separate them with a space
 # If the first SSID isn't found then it moves onto the next
 # If this isn't defined then it connects to the first one found
 #preferred_aps="SSID1 SSID2" 
@@ -312,9 +307,9 @@
 # "any" means it will connect to visible APs in the preferred list and then any
 # other available AP
 # "preferredonly" means it will only connect to visible APs in the preferred list
-# "forcepreferred" means it will forceably connect to APs in order if it does not find
+# "forcepreferred" means it will forcibly connect to APs in order if it does not find
 # them in a scan
-# "forcepreferredonly" means it forceably connects to the APs in order and does not bother
+# "forcepreferredonly" means it forcibly connects to the APs in order and does not bother
 # to scan
 # "forceany" does the same as forcepreferred + connects to any other available AP
 # Default is "any"
@@ -341,16 +336,16 @@
 
 ############################################################
 # wpa_supplicant
-# emerge net-wireless/wpa-supplicant
+# emerge net-wireless/wpa_supplicant
 # Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Console the wpa_supplicant.conf.example that is installed in
+# Consult the wpa_supplicant.conf.example that is installed in
 # /usr/share/doc/wpa_supplicant
 # To configure wpa_supplicant
 #wpa_supplicant_ath0="-Dmadwifi" # For Atheros based cards
 # Consult wpa_supplicant for more drivers - the default is -Dwext which should
 # work for most cards.
 
-# By default we don't wait for wpa_suppliant to associate and authenticate.
+# By default we don't wait for wpa_supplicant to associate and authenticate.
 # If you need to change this behaviour then you don't know how our scripts work
 # and setting this value could cause strange things to happen.
 # If you would like to, so can specify how long in seconds.
@@ -453,7 +448,7 @@
 # Set generic DHCP options like so
 #dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
 
-# This tells the dhcp client to release it's lease when it stops, not to
+# This tells the dhcp client to release its lease when it stops, not to
 # overwrite dns, ntp and nis settings, not to set a default route and not to
 # send the current hostname to the dhcp server and when it starts.
 # You can use any combination of the above options - the default is not to
@@ -577,7 +572,7 @@
 #config_bond0="null" # You may not want to assign an IP the the bond
 
 # You can also configure the bond here, which must be done via sysfs on 2.6
-# kernels or newer. See the kernel bonding documention for a description of
+# kernels or newer. See the kernel bonding documentation for a description of
 # these options.
 #arp_ip_target_bond0="+26.0.0.0"
 
@@ -663,7 +658,7 @@
 #
 # Dead peer detection
 #	lcp-echo-interval 15	# Send a LCP echo every 15 seconds
-#	lcp-echo-failure 3	# Make peer dead after 3 consective
+#	lcp-echo-failure 3	# Make peer dead after 3 consecutive
 #				# echo-requests
 #	
 # Compression options - use these to completely disable compression
@@ -827,8 +822,8 @@
 #config_nas0="'192.168.0.1/24'"
 
 #-----------------------------------------------------------------------------
-# Tunnelling
-# WARNING: For tunnelling it is highly recommended that you
+# Tunneling
+# WARNING: For tunneling it is highly recommended that you
 # emerge sys-apps/iproute2
 #
 # For GRE tunnels
@@ -843,7 +838,7 @@
 
 # 6to4 Tunnels allow IPv6 to work over IPv4 addresses, provided you
 # have a non-private address configured on an interface.
-# link_6to4="eth0"		# Interface to base it's addresses on
+# link_6to4="eth0"		# Interface to base its addresses on
 # config_6to4="ip6to4"
 # You may want to depend on eth0 like so
 #rc_need_6to4="net.eth0"
@@ -853,7 +848,7 @@
 # sit0 - otherwise use a different name like 6to4 in the example above.
 
 # You can also specify a relay and suffix if you like.
-# The default relay is 192.88.99.1 and the defualt suffix is :1
+# The default relay is 192.88.99.1 and the default suffix is :1
 #relay_6to4="192.168.3.2"
 #suffix_6to4=":ff"
 
@@ -901,7 +896,7 @@
 # and you're done :)
 
 # By default we don't wait for netplug/ifplugd to configure the interface.
-# If you would like it to wait so that other services now that network is up
+# If you would like it to wait so that other services know that network is up
 # then you can specify a timeout here.
 #plug_timeout="10"
 # A value of 0 means wait forever.
@@ -941,8 +936,8 @@
 
 #preup() {
 #	# Test for link on the interface prior to bringing it up.  This
-#	# only works on some network adapters and requires the mii-diag
-#	# package to be installed.
+#	# only works on some network adapters and requires the
+#	# sys-apps/net-tools package to be installed.
 #	if mii-tool "${IFACE}" 2> /dev/null | grep -q 'no link'; then
 #		ewarn "No link on ${IFACE}, aborting configuration"
 #		return 1
@@ -1003,7 +998,7 @@
 #		else
 #			for x; do
 #				ebegin "${x}"
-#				ip rule add ${x} dev "${IFACE}"
+#				ip rule add ${x}
 #				eend $?
 #			done
 #		fi

etc/rc.conf.in

@@ -2,7 +2,7 @@
 
 # Set to "YES" if you want the rc system to try and start services
 # in parallel for a slight speed improvement. When running in parallel we
-# prefix the service output with it's name as the output will get
+# prefix the service output with its name as the output will get
 # jumbled up.
 # WARNING: whilst we have improved parallel, it can still potentially lock
 # the boot process. Don't file bugs about this unless you can supply
@@ -11,7 +11,8 @@
 
 # Set rc_interactive to "YES" and you'll be able to press the I key during
 # boot so you can choose to start specific services. Set to "NO" to disable
-# this feature.
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
 #rc_interactive="YES"
 
 # If we need to drop to a shell, you can specify it here.
@@ -75,8 +76,14 @@
 # Set unicode to YES to turn on unicode support for keyboards and screens.
 #unicode="NO"
 
-# Network fstypes. Below is the default.
-net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
+# Below is the default list of network fstypes.
+#
+# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
 
 ##############################################################################
 # SERVICE CONFIGURATION VARIABLES

init.d.misc/.gitignore

@@ -0,0 +1,11 @@
+avahi-dnsconfd
+avahid
+dhcpcd
+dbus
+hald
+named
+ntpd
+openvpn
+polkitd
+sshd
+wpa_supplicant

init.d/.gitignore

@@ -24,6 +24,7 @@ mount-ro
 mtab
 numlock
 procfs
+staticroute
 sysfs
 devdb
 hostid
@@ -34,6 +35,7 @@ rc-enabled
 rpcbind
 savecore
 swap-blk
+swclock
 syslogd
 termencoding
 ttys

init.d/Makefile

@@ -1,6 +1,7 @@
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
-	network.in root.in savecache.in swap.in sysctl.in urandom.in
+	network.in root.in savecache.in staticroute.in swap.in swclock.in \
+	sysctl.in urandom.in
 BIN=	${OBJS}
 
 # Build our old net foo or not

init.d/bootmisc.in

@@ -4,7 +4,6 @@
 
 depend()
 {
-	use hostname
 	need localmount
 	before logger
 	after clock sysctl
@@ -36,6 +35,12 @@ cleanup_tmp_dir()
 		# Faster than find
 		rm -rf -- [^ajlq\.]*
 
+		# pam_mktemp creates a .private directory within which
+		# each user gets a private directory with immutable
+		# bit set; remove the immutable bit before trying to
+		# remove it.
+		[ -d /tmp/.private ] && chattr -R -a /tmp/.private 2> /dev/null
+
 		find $startopts ! -name . \
 			! -path "./lost+found" \
 			! -path "./lost+found/*" \
@@ -49,8 +54,6 @@ cleanup_tmp_dir()
 			! -path "./aquota.group/*" \
 			! -path "./journal" \
 			! -path "./journal/*" \
-			! -path "./.private" \
-			! -path "./.private/*" \
 			-exec rm -rf {} \;
 		eend 0
 	else
@@ -95,7 +98,7 @@ start()
 		for x in "" $xtra; do
 			mkutmp /var/run/utmp$x
 		done
-		[ -e /var/log/wtmp ] && mkutmp /var/log/wtmp
+		[ -e /var/log/wtmp ] || mkutmp /var/log/wtmp
 		eend 0
 
 		ebegin "Cleaning /var/run"

init.d/consolefont.in

@@ -8,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after hotplug bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 start()

init.d/fsck.in

@@ -9,7 +9,7 @@ _IFS="
 depend()
 {
 	use dev clock modules
-	keyword -jail -openvz -prefix -timeout -vserver
+	keyword -jail -openvz -prefix -timeout -vserver -lxc
 }
 
 _abort() {
@@ -30,38 +30,6 @@ _forcefsck()
 	[ -e /forcefsck ] || get_bootparam forcefsck
 }
 
-_on_ac_power()
-{
-	if [ -f /proc/acpi/ac_adapter/AC/state ]; then
-		cat /proc/acpi/ac_adapter/AC/state | while read line; do
-			case "$line" in
-			"state:"*"off-line") return 128;;
-			esac
-		done
-	elif [ -f /proc/pmu/info ]; then
-		cat /proc/pmu/info | while read line; do
-			case "$line" in
-			"AC Power"*": 0") return 128;;
-			esac
-		done
-	elif type envstat >/dev/null 2>&1; then
-		# NetBSD has envstat
-		envstat -d acpiacad0 2>/dev/null | while read line; do
-			case "$line" in
-			"connected:"*"OFF") return 128;;
-			esac
-		done
-	elif sysctl -q hw.acpi.acline >/dev/null 2>/dev/null; then
-		case $(sysctl -n hw.acpi.acline) in
-		0) return 1;;
-		*) return 0;;
-		esac
-	else
-		return 0
-	fi
-	[ $? != 128 ]
-}
-
 start()
 {
 	local fsck_opts= p= check_extra=
@@ -73,7 +41,7 @@ start()
 	if _forcefsck; then
 		fsck_opts="$fsck_opts -f"
 		check_extra="(check forced)"
-	elif ! _on_ac_power; then
+	elif ! yesno ${fsck_on_battery:-YES} && ! on_ac_power; then
 		ewarn "Skipping fsck due to not being on AC power"
 		return 0
 	fi

init.d/hwclock.in

@@ -28,7 +28,7 @@ depend()
 	else
 		before *
 	fi
-	keyword -openvz -prefix -uml -vserver -xenu
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 setupopts()

init.d/keymaps.in

@@ -8,14 +8,14 @@ depend()
 {
 	need localmount termencoding
 	after bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 start()
 {
 	ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 	: ${unicode:=$UNICODE}
-	: =${keymap:=$KEYMAP}
+	: ${keymap:=$KEYMAP}
 	: ${extended_keymaps:=$EXTENDED_KEYMAPS}
 	: ${windowkeys:=$SET_WINDOWSKEYS} 
 	: ${fix_euro:=$FIX_EURO}
@@ -34,15 +34,25 @@ start()
 		echo 1 > /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
 	fi
 
-	ebegin "Loading key mappings [$keymap]"
-	local loadkeys_uni= wkeys= kmode="-a" msg="ASCII"
+	local wkeys= kmode="-a" msg="ASCII"
 	if yesno $unicode; then
-		loadkeys_uni="--unicode"
 		kmode="-u"
 		msg="UTF-8"
 	fi
 	yesno $windowkeys && wkeys="windowkeys"
-	loadkeys -q $loadkeys_uni $wkeys $keymap $extended_keymaps
+
+	# Set terminal encoding to either ASCII or UNICODE.
+	# See utf-8(7) for more information.
+	ebegin "Setting keyboard mode [$msg]"
+	n=1
+	while [ $n -le $ttyn ]; do
+		kbd_mode $kmode -C $ttydev$n
+		n=$(($n + 1))
+	done
+	eend 0
+
+	ebegin "Loading key mappings [$keymap]"
+	loadkeys -q $wkeys $keymap $extended_keymaps
 	eend $? "Error loading key mappings" || return $?
 
 	if yesno $fix_euro; then
@@ -52,20 +62,6 @@ start()
 		eend $?
 	fi
 
-	# Set terminal encoding to either ASCII or UNICODE.
-	# See utf-8(7) for more information.
-	ebegin "Setting keyboard mode [$msg]"
-	if yesno $unicode; then
-		dumpkeys ${dumpkeys_charset:+-c} \
-			$dumpkeys_charset | loadkeys --unicode
-	fi
-	n=1
-	while [ $n -le $ttyn ]; do
-		kbd_mode $kmode -C $ttydev$n
-		n=$(($n + 1))
-	done
-	eend 0
-
 	# Save the keymapping for use immediately at boot
 	if [ -w "$RC_LIBEXECDIR" ]; then
 		mkdir -p "$RC_LIBEXECDIR"/console

init.d/local.in

@@ -18,11 +18,6 @@ start()
 		local_start
 	fi
 
-	# Support old configs
-	if [ -e @SYSCONFDIR@/conf.d/local.start ]; then
-		. @SYSCONFDIR@/conf.d/local.start
-	fi
-
 	eend $? "Failed to start local"
 }
 
@@ -34,10 +29,5 @@ stop()
 		local_stop
 	fi
 
-	# Support old configs
-	if [ -e @SYSCONFDIR@/conf.d/local.stop ]; then
-		. @SYSCONFDIR@/conf.d/local.stop
-	fi
-
 	eend $? "Failed to stop local"
 }

init.d/localmount.in

@@ -8,19 +8,22 @@ depend()
 {
 	need fsck
 	use lvm modules mtab
-	keyword -jail -openvz -prefix -vserver
+	keyword -jail -openvz -prefix -vserver -lxc
 }
 
 start()
 {
 	# Mount local filesystems in /etc/fstab.
-	local types="noproc" x=
+	local types="noproc" x= no_netdev=
 	for x in $net_fs_list; do
 		types="${types},${x}"
 	done
 
+	if [ "$RC_UNAME" = Linux ]; then
+		no_netdev="-O no_netdev"
+	fi
 	ebegin "Mounting local filesystems"
-	mount -at "$types"
+	mount -at "$types" $no_netdev
 	eend $? "Some local filesystem failed to mount"
 
 	# Always return 0 - some local mounts may not be critical for boot

init.d/modules.in

@@ -7,7 +7,7 @@ description="Loads a user defined list of kernel modules."
 depend()
 {
 	use isapnp
-	keyword -openvz -prefix -vserver
+	keyword -openvz -prefix -vserver -lxc
 }
 
 start()

init.d/mount-ro.in

@@ -7,7 +7,7 @@ description="Re-mount filesytems read-only for a clean reboot."
 depend()
 {
 	need killprocs savecache
-	keyword -prefix -openvz -vserver
+	keyword -prefix -openvz -vserver -lxc
 }
 
 start()

init.d/network.in

@@ -57,6 +57,32 @@ sys_interfaces()
 	esac
 }
 
+tentative()
+{
+	local inet= address= rest=
+
+	case "$RC_UNAME" in
+	Linux)
+		[ -x /sbin/ip ] || [ -x /bin/ip ] || return 1
+		[ -n "$(ip -f inet6 addr show tentative)" ]
+		;;
+	*)
+		local inet= address= rest=
+		LC_ALL=C ifconfig -a | while read inet address rest; do
+	 		case "${inet}" in
+			inet6)
+				case "${rest}" in
+				*" "tentative*) return 2;;
+				esac
+				;;
+			esac
+		done
+		[ $? = 2 ]
+		;;
+	esac
+}
+
+
 auto_interfaces()
 {
 	local ifs= c= f=
@@ -103,13 +129,28 @@ dumpargs()
 	esac
 }
 
+intup=false
 runip()
 {
 	local int="$1" err=
-
 	shift
+
+	# Ensure we have a valid broadcast address
+	case "$@" in
+	*" broadcast "*|*" brd "*) ;;
+	*:*) ;; # Ignore IPv6
+	*) set -- "$@" brd +;;
+	esac
+
 	err=$(LC_ALL=C ip address add "$@" dev "$int" 2>&1)
-	[ -z "$err" ] && return 0
+	if [ -z "$err" ]; then
+		# ip does not bring up the interface when adding addresses
+		if ! $intup; then
+			ip link set "$int" up
+			intup=true
+		fi
+		return 0
+	fi
 	if [ "$err" = "RTNETLINK answers: File exists" ]; then
 		ip address del "$@" dev "$int" 2>/dev/null
 	fi
@@ -120,8 +161,9 @@ runip()
 routeflush()
 {
 	if [ "$RC_UNAME" = Linux ]; then
-		if [ -x /sbin/ip ]; then
+		if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
 			ip route flush scope global
+			ip route delete default 2>/dev/null
 		else
 			# Sadly we also delete some link routes, but
 			# this cannot be helped
@@ -141,6 +183,8 @@ routeflush()
 				esac
 				route del $flags $dest $netmask $xtra
 			done
+			# Erase any default dev eth0 routes
+			route del default 2>/dev/null
 		fi
 	else
 		route -qn flush
@@ -165,12 +209,20 @@ runargs()
 start()
 {
 	local cr=0 r= int= intv= cmd= args= upcmd=
+
+	if [ -z "$domainname" -a -s /etc/defaultdomain ]; then
+		domainname=$(cat /etc/defaultdomain)
+	fi
+	if [ -n "$domainname" ]; then
+		ebegin "Setting NIS domainname: $domainname"
+		domainname "$domainname"
+		eend $?
+	fi
+
 	einfo "Starting network"
 	routeflush
 	if [ "$RC_UNAME" = "Linux" ]; then
 		ifconfig lo 127.0.0.1 netmask 255.0.0.0 || cr=1 
-		route add -net 127.0.0.0 netmask 255.0.0.0 \
-			gw 127.0.0.1 2>/dev/null
 		route add -net 127.0.0.0 netmask 255.0.0.0 \
 			gw 127.0.0.1 reject 2>/dev/null
 	else
@@ -194,7 +246,7 @@ start()
 			-f /etc/ifup."$int" -o -f "$cf" ] || continue
 		veinfo "$int"
 		case "$func" in
-		ip)	func=runip;;
+		ip)	func=runip; intup=false;;
 		esac
 		eindent
 		runargs /etc/ifup."$int" "$upcmd"
@@ -223,13 +275,41 @@ start()
 	eoutdent
 	eend $cr
 
+	# Wait for any inet6 tentative addresses
+	r=5
+	while [ $r -gt 0 ]; do
+		tentative || break
+		[ $r = 5 ] && vebegin "Waiting for tentative addresses"
+		sleep 1
+		r=$(($r - 1))
+	done
+	if [ $r != 5 ]; then
+		[ $r != 0 ]
+		veend $?
+	fi
+	
 	if [ -n "$defaultroute" ]; then
 		ebegin "Setting default route $defaultroute"
-		if [ "$RC_UNAME" = Linux ]; then
-			route add default gw $defaultroute
-		else
 		route add default $defaultroute
+		eend $?
+	elif [ -n "$defaultiproute" ]; then
+		ebegin "Setting default route $defaultiproute"
+		ip route add default $defaultiproute
+		eend $?
 	fi
+
+	if [ -n "$defaultroute6" ]; then
+		ebegin "Setting default route $defaultroute6"
+		if [ "$RC_UNAME" = Linux ]; then
+			routecmd="route -A inet6 add"
+		else
+			routecmd="route -inet6 add"
+		fi
+		$routecmd default $defaultroute6
+		eend $?
+	elif [ -n "$defaultiproute6" ]; then
+		ebegin "Setting default route $defaultiproute6"
+		ip -f inet6 route add default $defaultiproute6
 		eend $?
 	fi
 
@@ -258,6 +338,11 @@ stop()
 		then
 			veinfo "$int"
 			runargs /etc/ifdown."$int" "$downcmd"
+			if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
+				# We need to do this, otherwise we may
+				# fail to add things correctly on restart
+				ip address flush dev "$int" 2>/dev/null
+			fi
 			ifconfig "$int" down 2>/dev/null
 			ifconfig "$int" destroy 2>/dev/null
 		fi

init.d/numlock.in

@@ -9,7 +9,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 depend()
 {
 	need localmount
-	keyword -openvz -prefix -vserver
+	keyword -openvz -prefix -vserver -lxc
 }
 
 _setleds()

init.d/procfs.in

@@ -8,12 +8,12 @@ depend()
 {
 	use modules devfs
 	need localmount
-	keyword -openvz -prefix -vserver
+	keyword -openvz -prefix -vserver -lxc
 }
 
 start()
 {
-	# Make sure we insert usbcore if its a module
+	# Make sure we insert usbcore if it's a module
 	if [ -f /proc/modules -a ! -d /proc/bus/usb ]; then
 		modprobe -q usbcore
 	fi

init.d/root.in

@@ -7,7 +7,7 @@ description="Mount the root fs read/write"
 depend()
 {
 	need fsck
-	keyword -jail -openvz -prefix -vserver
+	keyword -jail -openvz -prefix -vserver -lxc
 }
 
 start()

init.d/savecache.in

@@ -22,7 +22,7 @@ start()
 		fi
 	fi
 	local save=
-	for x in deptree depconfig softlevel nettree rc.log; do
+	for x in deptree depconfig shutdowntime softlevel nettree rc.log; do
 		[ -e "$RC_SVCDIR/$x" ] && save="$save $RC_SVCDIR/$x"
 	done
 	if [ -n "$save" ]; then

init.d/staticroute.in

@@ -0,0 +1,104 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+# This script was inspired by the equivalent rc.d staticroute from NetBSD.
+
+description="Configures static routes."
+__nl="
+"
+
+depend()
+{
+	provide net
+	use network
+	keyword -jail -prefix -vserver
+}
+
+pre_flight_checks()
+{
+	route=route
+	[ -s /etc/route.conf ] && return 0
+
+	if [ -n "$staticiproute" ]; then
+		route="ip route"
+		staticroute="$staticiproute"
+	fi
+}
+
+dump_args()
+{
+	# Route configuration file, as used by the NetBSD RC system
+	if [ -s /etc/route.conf ]; then
+		cat /etc/route.conf
+		return $?
+	fi
+
+	case "$staticroute" in
+	*"$__nl"*)
+		echo "$staticroute"
+		;;
+	*)
+		(
+			set -o noglob
+			IFS=';'; set -- $staticroute
+			IFS="$__nl"; echo "$*"
+		)
+		;;
+	esac
+}
+
+do_routes()
+{
+	local xtra= family=
+	[ "$RC_UNAME" != Linux ] && xtra=-q
+
+	ebegin "$1 static routes"
+	eindent
+	pre_flight_checks
+	dump_args | while read args; do
+		[ -z "$args" ] && continue
+		case "$args" in
+		"#"*)
+			;;
+		"+"*)
+			[ $2 = "add" ] && eval ${args#*+}
+			;;
+		"-"*)
+			[ $2 = "del" -o $2 = "delete" ] && eval ${args#*-}
+			;;
+		*)
+			veinfo "$args"
+			case "$route" in
+			"ip route")
+				ip route $2 $args
+				;;
+			*)
+				# Linux route does cannot work it out ...
+				if [ "$RC_UNAME" = Linux ]; then
+					case "$args" in
+					*:*) family="-A inet6";;
+					*) family=;;
+					esac
+				fi
+				route $famly $xtra $2 -$args
+				;;
+			esac
+			veend $?
+		esac
+	done
+	eoutdent
+	eend 0
+}
+
+start()
+{
+	do_routes "Adding" "add"
+}
+
+stop()
+{
+	local cmd="delete"
+	[ "$RC_UNAME" = Linux ] && cmd="del"
+	do_routes "Deleting" "$cmd"
+}

init.d/swap.in

@@ -5,7 +5,7 @@
 depend()
 {
 	need localmount
-	keyword -jail -openvz -prefix -vserver
+	keyword -jail -openvz -prefix -vserver -lxc
 }
 
 start()

init.d/swclock.in

@@ -0,0 +1,28 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Sets the local clock to the mtime of a given file."
+
+depend()
+{
+	before *
+	provide clock
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
+}
+
+# swclock is an OpenRC built in
+
+start()
+{
+	ebegin "Setting the local clock based on last shutdown time"
+	swclock --warn
+	eend $?
+}
+
+stop()
+{
+	ebegin "Saving the shutdown time"
+	swclock --save
+	eend $?
+}

init.d/sysctl.BSD.in

@@ -4,7 +4,6 @@
 
 depend()
 {
-	use hostname
 	before bootmisc logger
 	keyword -prefix
 }
@@ -12,13 +11,21 @@ depend()
 start()
 {
 	[ -e /etc/sysctl.conf ] || return 0
-	local retval=0 var= comments=
+	local retval=0 var= comments= conf=
 	ebegin "Configuring kernel parameters"
+	eindent
+	for conf in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
+		if [ -r "$conf" ]; then
+			vebegin "applying $conf"
 			while read var comments; do
 				case "$var" in
 				""|"#"*) continue;;
 				esac
 				sysctl -w "$var" >/dev/null || retval=1
-	done < /etc/sysctl.conf
+			done < "$conf"
+			veend $retval
+		fi
+	done
+	eoutdent
 	eend $retval "Some errors were encountered"
 }

init.d/sysctl.Linux.in

@@ -4,15 +4,22 @@
 
 depend()
 {
-	use hostname
 	before bootmisc logger
 	keyword -openvz -prefix -vserver
 }
 
 start()
 {
-	[ -e /etc/sysctl.conf ] || return 0
+	local conf= retval=0
 	ebegin "Configuring kernel parameters"
-	sysctl -p >/dev/null
-	eend $? "Some errors were encountered"
+	eindent
+	for conf in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
+		if [ -r "$conf" ]; then
+			vebegin "applying $conf"
+			sysctl -p "$conf" >/dev/null
+			veend $? || retval=1
+		fi
+	done
+	eoutdent
+	eend $retval "Some errors were encountered"
 }

man/einfo.3

@@ -39,7 +39,7 @@
 .Nm eprefix
 .Nd colorful informational output
 .Sh LIBRARY
-Enhanced Informatation output library (libeinfo, -leinfo)
+Enhanced Information output library (libeinfo, -leinfo)
 .Sh SYNOPSIS
 .In einfo.h
 .Ft int Fn einfo "const char * restrict format" ...

man/rc-status.8

@@ -36,7 +36,7 @@
 .Nm
 gathers and displays information about the status of services 
 in different runlevels.  The default behavior is to show information 
-about the current runlevel and any unassgined services that are not stopped,
+about the current runlevel and any unassigned services that are not stopped,
 but any runlevel can be quickly examined.
 .Pp
 The options are as follows:

man/rc_find_pids.3

@@ -54,7 +54,7 @@ owned by
 .Fa uid ,
 all of which are optional.
 .Pp
-The retuned list should be freed when done.
+The returned list should be freed when done.
 .Sh IMPLEMENTATION NOTES
 On BSD systems we use
 .Lb libkvm

man/rc_plugin_hook.3

@@ -42,7 +42,7 @@ is set to the hook running, and
 .Fa name
 is set to the name of the runlevel or name of the service.
 .Pp
-Plugins can affect the parent environemnt by writing NULL separated strings to
+Plugins can affect the parent environment by writing NULL separated strings to
 .Va rc_environ_fd .
 .Sh SEE ALSO
 .Xr rc 8 ,

man/runscript.8

@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd July 1, 2009
+.Dd November 4, 2009
 .Dt RUNSCRIPT 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -39,8 +39,8 @@
 .Nm
 is basically an interpreter for shell scripts which provide an easy interface
 to the often complex system commands and daemons.
-When a service runs a command it first loads it's mulitplexed configuration
-file, then it's master configuration file, then
+When a service runs a command it first loads its multiplexed configuration
+file, then its master configuration file, then
 .Pa /etc/rc.conf
 and finally the script itself. At this point
 .Nm
@@ -79,7 +79,7 @@ Ignore all dependency information the service supplies.
 Only run the command if the service has been started.
 .It Fl q , -quiet
 Turns off all informational output the service generates.
-Output from any non OpenRC comands is not affected.
+Output from any non OpenRC commands is not affected.
 .It Fl v , -verbose
 Turns on any extra informational output the service generates.
 .It Fl Z , -dry-run
@@ -90,9 +90,9 @@ or stopping them.
 The following variables affect the service script:
 .Bl -tag -width "RC_DEFAULTLEVEL"
 .It Ar extra_commands
-Space seperated list of extra commands the service defines.
+Space separated list of extra commands the service defines.
 .It Ar extra_started_commands
-Space seperated list of extra commands the service defines. These only work if
+Space separated list of extra commands the service defines. These only work if
 the service has already been started.
 .It Ar description
 String describing the service.
@@ -128,7 +128,7 @@ will refuse to stop until any services that need it have stopped.
 The service will attempt to start any services we use that have been added
 to the runlevel.
 .It Ic after
-The service will start after thse services and stop before these services.
+The service will start after these services and stop before these services.
 .It Ic before
 The service will start before these services and stop after these services.
 .It Ic provide
@@ -143,6 +143,8 @@ When in a jail, exclude this service from any dependencies. The service can
 still be run directly.
 .It Dv -openvz
 Same as -jail, but for OpenVZ systems.
+.It Dv -lxc
+Same as -jail, but for Linux Resource Containers (LXC).
 .It Dv -shutdown
 Don't stop this service when shutting the system down.
 This normally quite safe as remaining daemons will be sent a SIGTERM just
@@ -223,7 +225,7 @@ is newer than
 return 0, otherwise 1.
 If
 .Ar file2
-is a directory, then check all it's contents too.
+is a directory, then check all its contents too.
 .It Ic is_older_than Ar file1 Ar file2 ...
 If
 .Ar file1
@@ -232,7 +234,7 @@ is newer than
 return 0, otherwise 1.
 If
 .Ar file2
-is a directory, then check all it's contents too.
+is a directory, then check all its contents too.
 .It Ic service_set_value Ar name Ar value
 Saves the
 .Ar name
@@ -318,7 +320,7 @@ Configuration files, relative to the location of the service.
 If a file ending with .${RC_RUNLEVEL} exists then we use that instead.
 .Bl -ohang
 .It Pa ../conf.d/${RC_SVCNAME%%.*}
-mulitplexed configuration file.
+multiplexed configuration file.
 Example: if ${RC_SVCNAME} is net.eth1 then look for
 .Pa ../conf.d/net .
 .It Pa ../conf.d/${RC_SVCNAME}

man/start-stop-daemon.8

@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd September 4, 2009
+.Dd December 14, 2009
 .Dt START-STOP-DAEMON 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -43,7 +43,7 @@
 .Ar daemon
 .Sh DESCRIPTION
 .Nm
-provides a consistent method of starting, stopping and signalling daemons.
+provides a consistent method of starting, stopping and signaling daemons.
 If neither
 .Fl K , -stop
 nor
@@ -85,7 +85,7 @@ then
 .Nm
 matches the process
 .D1 /usr/bin/perl -w foo
-If an interpreted daemon changes it's process name then this won't work.
+If an interpreted daemon changes its process name then this won't work.
 .It Fl u , -user Ar user Ns Op : Ns Ar group
 Start the daemon as the
 .Ar user
@@ -136,6 +136,10 @@ option. Only useful when used with daemons that run in the foreground and
 forced into the background with the
 .Fl -b , -background
 option.
+.It Fl I , -ionice Ar class Ns Op : Ns Ar data
+Modifies the IO scheduling priority of the daemon.
+Class can be 0 for none, 1 for real time, 2 for best effort and 3 for idle.
+Data can be from 0 to 7 inclusive.
 .It Fl N , -nice Ar level
 Modifies the scheduling priority of the daemon.
 .It Fl 1 , -stdout Ar logfile
@@ -144,9 +148,9 @@ Redirect the standard output of the process to logfile when started with
 Must be an absolute pathname, but relative to the path optionally given with
 .Fl r , -chroot .
 The logfile can also be a named pipe.
-.It Fl w , -wait Ar seconds
+.It Fl w , -wait Ar milliseconds
 Wait
-.Ar seconds
+.Ar milliseconds
 after starting and check that daemon is still running.
 Useful for daemons that check configuration after forking or stopping race
 conditions where the pidfile is written out after forking.

net/bonding.sh

@@ -15,7 +15,14 @@ _is_bond()
 
 bonding_pre_start()
 {
-	local x= s= slaves="$(_get_array "slaves_${IFVAR}")" 
+	local x= s= n= slaves= primary=
+
+	slaves="$(_get_array "slaves_${IFVAR}")"
+	unset slaves_${IFVAR}
+
+	eval primary="\$primary_${IFVAR}"
+	unset primary_${IFVAR}
+
 
 	[ -z "${slaves}" ] && return 0
 
@@ -39,13 +46,31 @@ bonding_pre_start()
 		return 1
 	fi
 
-	# Configure the bond.
-	# Nice and dynamic :)
+	# Interface must be down in order to configure
+	_down
+
+	# Configure the bond mode, then we can reloop to ensure we configure
+	# All other options
+	for x in /sys/class/net/"${IFACE}"/bonding/mode; do
+		[ -f "${x}" ] || continue
+		n=${x##*/}
+		eval s=\$${n}_${IFVAR}
+		if [ -n "${s}" ]; then
+			einfo "Setting ${n}: ${s}"
+			echo "${s}" >"${x}" || \
+			eerror "Failed to configure $n (${n}_${IFVAR})"
+		fi
+	done
+	# Nice and dynamic for remaining options:)
 	for x in /sys/class/net/"${IFACE}"/bonding/*; do
 		[ -f "${x}" ] || continue
-		eval s=\$${x##*/}_${IFVAR}
+		n=${x##*/}
+		eval s=\$${n}_${IFVAR}
+		[ "${n}" != "mode" ] || continue
 		if [ -n "${s}" ]; then
-			echo "${s}" >"${x}"
+			einfo "Setting ${n}: ${s}"
+			echo "${s}" >"${x}" || \
+			eerror "Failed to configure $n (${n}_${IFVAR})"
 		fi
 	done
 
@@ -72,6 +97,11 @@ bonding_pre_start()
 	# finally add in slaves
 	eoutdent
 	if [ -d /sys/class/net ]; then
+		if [ -n "${primary}" ]; then
+			echo "+${primary}" >/sys/class/net/"${IFACE}"/bonding/slaves
+			echo "${primary}" >/sys/class/net/"${IFACE}"/bonding/primary
+			slaves="${slaves/${primary}/}"
+		fi
 		for s in ${slaves}; do
 			echo "+${s}" >/sys/class/net/"${IFACE}"/bonding/slaves
 		done
@@ -117,6 +147,12 @@ bonding_stop()
 	done
 	)
 
+	_down
+
+	if [ -d /sys/class/net ]; then
+		echo "-${IFACE}" > /sys/class/net/bonding_masters
+	fi
+
 	eend 0
 	return 0
 }

net/bridge.sh

@@ -11,7 +11,8 @@ _config_vars="$_config_vars bridge bridge_add brctl"
 
 _is_bridge()
 {
-	brctl show 2>/dev/null | grep -q "^${IFACE}[[:space:]]"
+	# Ignore header line so as to allow for bridges named 'bridge'
+	brctl show 2>/dev/null | sed '1,1d' | grep -q "^${IFACE}[[:space:]]"
 }
 
 bridge_pre_start()
@@ -88,14 +89,16 @@ bridge_post_stop()
 	if _is_bridge; then
 		ebegin "Destroying bridge ${IFACE}"
 		_down
+		# Ignore header line so as to allow for bridges named 'bridge'
 		ports="$(brctl show 2>/dev/null | \
-			sed -n -e '/^'"${IFACE}"'[[:space:]]/,/^\S/ { /^\('"${IFACE}"'[[:space:]]\|\t\)/s/^.*\t//p }')"
+			sed -n -e '1,1d' -e '/^'"${IFACE}"'[[:space:]]/,/^\S/ { /^\('"${IFACE}"'[[:space:]]\|\t\)/s/^.*\t//p }')"
 		delete=true
 		iface=${IFACE}
 		eindent
 	else
 		# Work out if we're added to a bridge for removal or not
-		eval set -- $(brctl show 2>/dev/null | sed -e "s/'/'\\\\''/g" -e "s/$/'/g" -e "s/^/'/g")
+		# Ignore header line so as to allow for bridges named 'bridge'
+		eval set -- $(brctl show 2>/dev/null | sed -e '1,1d' -e "s/'/'\\\\''/g" -e "s/$/'/g" -e "s/^/'/g")
 		local line=
 		for line; do
 			set -- ${line}

net/dhclient.sh

@@ -17,6 +17,7 @@ dhclient_start()
 
 	# Get our options
 	# These options only work in Gentoo, and maybe RedHat
+	eval args=\$dhclient_${IFVAR}
 	eval opts=\$dhcp_${IFVAR}
 	[ -z "${opts}" ] && opts=${dhcp}
 

net/dhcpcd.sh

@@ -56,8 +56,11 @@ dhcpcd_start()
 		esac
 	done
 
-	# Add our route metric
-	[ "${metric:-0}" != "0" ] && args="${args} -m ${metric}"
+	# Add our route metric if not given
+	case " $args " in
+	*" -m "*) ;;
+	*) [ "${metric:-0}" != 0 ] && args="$args -m $metric";;
+	esac
 
 	# Bring up DHCP for this interface
 	ebegin "Running dhcpcd"

net/ifconfig.sh.Linux.in

@@ -42,7 +42,8 @@ _ifindex()
 _is_wireless()
 {
 	# Support new sysfs layout
-	[ -d /sys/class/net/"${IFACE}"/wireless ] && return 0
+	[ -d /sys/class/net/"${IFACE}"/wireless -o \
+		-d /sys/class/net/"${IFACE}"/phy80211 ] && return 0
 
 	[ ! -e /proc/net/wireless ] && return 1
 	grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/wireless

net/iproute2.sh

@@ -1,9 +1,18 @@
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
+_ip()
+{
+	if [ -x /bin/ip ]; then
+		echo /bin/ip
+	else
+		echo /sbin/ip
+	fi
+}
+
 iproute2_depend()
 {
-	program /sbin/ip
+	program $(_ip)
 	provide interface
 	after ifconfig
 }
@@ -43,7 +52,8 @@ _ifindex()
 _is_wireless()
 {
 	# Support new sysfs layout
-	[ -d /sys/class/net/"${IFACE}"/wireless ] && return 0
+	[ -d /sys/class/net/"${IFACE}"/wireless -o \
+		-d /sys/class/net/"${IFACE}"/phy80211 ] && return 0
 
 	[ ! -e /proc/net/wireless ] && return 1
 	grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/wireless
@@ -159,7 +169,8 @@ _add_route()
 
 	# We cannot use a metric if we're using a nexthop
 	if ! ${have_metric} && \
-		[ -n "${metric}" -a -z "${cmd##* nexthop }" ]
+		[ -n "${metric}" -a \
+			"${cmd##* nexthop }" = "$cmd" ]
 	then
 		cmd="${cmd} metric ${metric}"
 	fi

net/pppd.sh

@@ -90,7 +90,7 @@ pppd_pre_start()
 	eval passwordset=\$\{password_${IFVAR}-x\}
 	if [ -n "${username}" ] \
 	&& [ -n "${password}" -o -z "${passwordset}" ]; then
-		opts="${opts} plugin passwordfd.so passwordfd 0"
+		opts="plugin passwordfd.so ${opts} passwordfd 0"
 	fi
 	
 	if ! ${hasdefaultmetric}; then
@@ -155,7 +155,7 @@ pppd_pre_start()
 			opts="${opts} connect true"
 			set -- "$@" "${link}"
 		fi
-		opts="${opts} plugin $1.so"
+		opts="plugin $1.so ${opts}"
 		shift
 		opts="${opts} $@"
 	done

net/tuntap.sh

@@ -26,7 +26,7 @@ tuntap_pre_start()
 			return 1
 		fi
 		vebegin "Waiting for /dev/net/tun"
-		# /dev/net/tun can take it's time to appear
+		# /dev/net/tun can take its time to appear
 		local timeout=10
 		while [ ! -e /dev/net/tun -a ${timeout} -gt 0 ]; do
 			sleep 1

net/vlan.sh

@@ -20,7 +20,7 @@ _is_vlan()
 _get_vlans()
 {
 	[ -e /proc/net/vlan/config ] || return 1
-	sed -n -e 's/^\(.*[0-9]\) \(.* \) .*'"${IFACE}"'$/\1/p' /proc/net/vlan/config
+	sed -n -e 's/^\W*\([^ ]*\) \(.* \) .*'"${IFACE}"'$/\1/p' /proc/net/vlan/config
 }
 
 _check_vlan()
@@ -87,7 +87,7 @@ vlan_post_start()
 
 		# We need to work out the interface name of our new vlan id
 		local ifname="$(sed -n -e \
-			's/^\([^[:space:]]*\) *| '"${vlan}"' *| .*'"${iface}"'$/\1/p' \
+			's/^\([^[:space:]]*\) *| '"${vlan}"' *| .*'"${IFACE}"'$/\1/p' \
 			/proc/net/vlan/config )"
 		mark_service_started "net.${ifname}"
 		(

pkgconfig/Makefile

@@ -2,7 +2,8 @@ DIR=	${LIBDIR}/pkgconfig
 SRCS=	einfo.pc.in openrc.pc.in
 INC=	einfo.pc openrc.pc
 
-sed -n -e 's/^VERSION=[[:space:]]*\([^[:space:]]*\).*/#define VERSION "\1${GITVER}\"/p' ../../Makefile > version.h
+.DEFAULT:
+	${SED} -n -e 's/^VERSION=[[:space:]]*\([^[:space:]]*\).*/#define VERSION "\1${GITVER}\"/p' ../../Makefile > version.h
 
 SED_EXTRA=	-e 's:@VERSION@:${VERSION}:g'
 

runlevels/Makefile

@@ -1,5 +1,5 @@
 BOOT=		bootmisc fsck hostname localmount network \
-		root swap sysctl urandom
+		root staticroute swap sysctl urandom
 DEFAULT=	local netmount
 SHUTDOWN=	savecache
 

scripts/Makefile

@@ -0,0 +1,5 @@
+DIR=	${LIBEXECDIR}/bin
+BIN=	on_ac_power
+
+MK=	../mk
+include ${MK}/scripts.mk

scripts/on_ac_power

@@ -0,0 +1,37 @@
+#!/bin/sh
+# Detect AC power or not in a portable way
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+
+# Exit 0 if on AC power, 1 if not and 255 if we don't know how to work it out
+if [ -f /proc/acpi/ac_adapter/AC*/state ]; then
+	cat /proc/acpi/ac_adapter/AC*/state | while read line; do
+		case "$line" in
+		"state:"*"off-line") exit 128;;
+		esac
+	done
+elif [ -f /sys/class/power_supply/AC*/online ]; then
+	cat /sys/class/power_supply/AC*/online | while read line; do
+		[ "${line}" = 0 ] && exit 128
+	done
+elif [ -f /proc/pmu/info ]; then
+	cat /proc/pmu/info | while read line; do
+		case "$line" in
+		"AC Power"*": 0") exit 128;;
+		esac
+	done
+elif type envstat >/dev/null 2>&1; then
+	# NetBSD has envstat
+	envstat -d acpiacad0 2>/dev/null | while read line; do
+		case "$line" in
+		"connected:"*"OFF") exit 128;;
+		esac
+	done
+elif sysctl -q hw.acpi.acline >/dev/null 2>/dev/null; then
+	case $(sysctl -n hw.acpi.acline) in
+	0) exit 1;;
+	*) exit 0;;
+	esac
+else
+	exit 255
+fi
+[ $? != 128 ]

sh/gendepends.sh.in

@@ -5,6 +5,7 @@
 # All rights reserved. Released under the 2-clause BSD license.
 
 . @SYSCONFDIR@/init.d/functions.sh
+. @LIBEXECDIR@/sh/rc-functions.sh
 
 config() {
 	[ -n "$*" ] && echo "$RC_SVCNAME config $*" >&3
@@ -82,24 +83,7 @@ do
 
 		if . "$_dir/$RC_SVCNAME"; then
 			echo "$RC_SVCNAME" >&3
-			depend
-			_rc_svcname=$(shell_var "$RC_SVCNAME")
-
-			# Add any user defined depends
-			for _deptype in config:CONFIG need:NEED use:USE \
-			after:AFTER before:BEFORE \
-			provide:PROVIDE keyword:KEYWORD; do
-				IFS=:
-				set -- $_deptype
-				unset IFS
-				eval _depends=\$rc_$_rc_svcname_$1
-				[ -z "$_depends" ] && eval _depends=\$rc_$1
-				[ -z "$_depends" ] && \
-					eval _depends=\$RC_$_rc_svcname_$2
-				[ -z "$_depends" ] && eval _depends=\$RC_$2
-
-				$1 ${_depends}
-			done
+			_depend
 		fi
 		)
 	done

sh/init-early.sh.Linux.in

@@ -17,7 +17,7 @@ fi
 if [ -e /etc/runlevels/"$RC_DEFAULTLEVEL"/consolefont \
 	 -o -e /etc/runlevels/"$RC_BOOTLEVEL"/consolefont ]; then
 	printf "\033%s" "$termencoding" >"$CONSOLE" 2>/dev/null
-	if [ -r "$RC_LIBEXECDIR"/console/font -a -x /bin/setfont ]; then
+	if [ -r "$RC_LIBEXECDIR"/console/font -a -x /usr/bin/setfont ]; then
 		font="$(cat "$RC_LIBEXECDIR"/console/font)"
 		[ -c "$CONSOLE" ] && cons="-C $CONSOLE"
 		setfont $cons "$RC_LIBEXECDIR"/console/"$font" 2>/dev/null
@@ -29,7 +29,7 @@ if [ -e /etc/runlevels/"$RC_DEFAULTLEVEL"/keymaps \
 	 -o -e /etc/runlevels/"$RC_BOOTLEVEL"/keymaps ]; then
 	kbd_mode $kmode -C "$CONSOLE" 2>/dev/null
 	if [ -r "$RC_LIBEXECDIR"/console/keymap ]; then
-		loadkeys "$RC_LIBEXECDIR"/console/keymap 2>/dev/null
+		loadkeys -q "$RC_LIBEXECDIR"/console/keymap 2>/dev/null
 	fi
 fi
 

sh/init.sh.Linux.in

@@ -8,14 +8,19 @@
 # tmpfs and ramfs are easy, so force one or the other.
 mount_svcdir()
 {
+	# mount from fstab if we can
+	fstabinfo --mount "$RC_SVCDIR" && return 0
+
 	local fs= fsopts="-o rw,noexec,nodev,nosuid"
-	local devdir="rc-svcdir" x=
 	local svcsize=${rc_svcsize:-1024}
 
+	# Some buggy kernels report tmpfs even when not present :(
 	if grep -Eq "[[:space:]]+tmpfs$" /proc/filesystems; then
-		fs="tmpfs"
-		fsopts="$fsopts,mode=0755,size=${svcsize}k"
-	elif grep -Eq "[[:space:]]+ramfs$" /proc/filesystems; then
+		mount -n -t tmpfs $fsopts,mode=755,size=${svcsize}k \
+			rc-svcdir "$RC_SVCDIR" && return 0
+	fi
+	
+	if grep -Eq "[[:space:]]+ramfs$" /proc/filesystems; then
 		fs="ramfs"
 		# ramfs has no special options
 	elif [ -e /dev/ram0 ] \
@@ -32,10 +37,7 @@ mount_svcdir()
 		return 1
 	fi
 
-	# If we have no entry in fstab for $RC_SVCDIR, provide our own
-	if ! fstabinfo --mount "$RC_SVCDIR"; then
-		mount -n -t "$fs" $fsopts "$devdir" "$RC_SVCDIR"
-	fi
+	mount -n -t "$fs" $fsopts rc-svcdir "$RC_SVCDIR"
 }
 
 . "$RC_LIBEXECDIR"/sh/functions.sh
@@ -68,4 +70,14 @@ if $mountproc; then
 	eend $?
 fi
 
+# Try to mount xenfs as early as possible, otherwise rc_sys() will always
+# return RC_SYS_XENU and will think that we are in a domU while it's not.
+if grep -Eq "[[:space:]]+xenfs$" /proc/filesystems; then
+	ebegin "Mounting xenfs"
+	if ! fstabinfo --mount /proc/xen; then
+		mount -n -t xenfs xenfs /proc/xen -o nosuid,nodev,noexec
+	fi
+	eend $?
+fi
+
 . "$RC_LIBEXECDIR"/sh/init-common-post.sh

sh/rc-functions.sh.in

@@ -38,7 +38,8 @@ stop_addon()
 	( import_addon "$1-stop" )
 }
 
-net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
+net_fs_list="afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre
+ncpfs nfs nfs4 ocfs2 shfs smbfs $extra_net_fs_list"
 is_net_fs()
 {
 	[ -z "$1" ] && return 1
@@ -84,6 +85,27 @@ get_bootparam()
 	return 1
 }
 
+# Called from runscript.sh or gendepends.sh
+_depend() {
+	depend
+	local _rc_svcname=$(shell_var "$RC_SVCNAME") _deptype= _depends=
+
+	# Add any user defined depends
+	for _deptype in config:CONFIG need:NEED use:USE \
+	after:AFTER before:BEFORE \
+	provide:PROVIDE keyword:KEYWORD; do
+		IFS=:
+		set -- $_deptype
+		unset IFS
+		eval _depends=\$rc_${_rc_svcname}_$1
+		[ -z "$_depends" ] && eval _depends=\$rc_$1
+		[ -z "$_depends" ] && eval _depends=\$RC_${_rc_svcname}_$2
+		[ -z "$_depends" ] && eval _depends=\$RC_$2
+
+		$1 $_depends
+	done
+}
+
 # Add our sbin to $PATH
 case "$PATH" in
 	"$RC_LIBEXECDIR"/sbin|"$RC_LIBEXECDIR"/sbin:*);;

sh/rc-mount.sh

@@ -26,6 +26,8 @@ do_unmount()
 		# Unmounting a shared mount can unmount other mounts, so
 		# we need to check the mount is still valid
 		mountinfo --quiet "$mnt" || continue
+		# Ensure we interpret all characters properly.
+		mnt=$(printf "$mnt")
 
 		case "$cmd" in
 			umount)
@@ -36,7 +38,7 @@ do_unmount()
 				;;
 		esac
 
-		retry=3
+		retry=4 # Effectively TERM, sleep 1, TERM, sleep 1, KILL, sleep 1
 		while ! LC_ALL=C $cmd "$mnt" 2>/dev/null; do
 			if type fuser >/dev/null 2>&1; then
 				pids="$(fuser $f_opts "$mnt" 2>/dev/null)"
@@ -53,13 +55,16 @@ do_unmount()
 					eend 1 "in use but fuser finds nothing"
 					retry=0;;
 				*)
-					local sig="KILL"
-					[ $retry -gt 0 ] && sig="TERM"
+					if [ $retry -le 0 ]; then
+						eend 1
+					else
+						local sig="TERM"
+						retry=$(($retry - 1))
+						[ $retry = 1 ] && sig="KILL"
 						fuser $f_kill$sig -k $f_opts \
 							"$mnt" >/dev/null 2>&1
 						sleep 1
-					retry=$(($retry - 1))
-					[ $retry -le 0 ] && eend 1
+					fi
 					;;
 			esac
 			[ $retry -le 0 ] && break

sh/runscript.sh.in

@@ -187,8 +187,14 @@ done
 unset _f
 
 while [ -n "$1" ]; do
+	# Sepcial case depend
+	if [ "$1" = depend ]; then
+		shift
+		_depend
+		continue
+	fi
 	# See if we have the required function and run it
-	for _cmd in describe start stop status depend ${extra_commands:-$opts} \
+	for _cmd in describe start stop status ${extra_commands:-$opts} \
 		$extra_started_commands
 	do
 		if [ "$_cmd" = "$1" ]; then

src/includes/rc-misc.h

@@ -35,6 +35,7 @@
 #include <sys/stat.h>
 #include <errno.h>
 #include <stdbool.h>
+#include <stdlib.h>
 #include <string.h>
 
 #define RC_LEVEL_BOOT           "boot"

src/libeinfo/libeinfo.c

@@ -643,7 +643,7 @@ static int EINFO_PRINTF(3, 0)
 		fprintf(f, "\n");
 	if (_eprefix)
 		fprintf(f, "%s%s%s|", _ecolor(f, color), _eprefix, _ecolor(f, ECOLOR_NORMAL));
-	fprintf(f, "%s*%s ", _ecolor(f, color), _ecolor(f, ECOLOR_NORMAL));
+	fprintf(f, " %s*%s ", _ecolor(f, color), _ecolor(f, ECOLOR_NORMAL));
 	retval += _eindent(f);
 	va_copy(ap, va);
 	retval += vfprintf(f, fmt, ap) + 3;
@@ -800,7 +800,7 @@ ebegin(const char *EINFO_RESTRICT fmt, ...)
 	va_start(ap, fmt);
 	retval = _einfovn(fmt, ap);
 	va_end(ap);
-	retval += printf("...");
+	retval += printf(" ...");
 	if (colour_terminal(stdout))
 		retval += printf("\n");
 	LASTCMD("ebegin");
@@ -817,7 +817,7 @@ _eend(FILE * EINFO_RESTRICT fp, int col, ECOLOR color, const char *msg)
 	if (!msg)
 		return;
 
-	cols = get_term_columns(fp) - (strlen(msg) + 3);
+	cols = get_term_columns(fp) - (strlen(msg) + 5);
 
 	/* cons25 is special - we need to remove one char, otherwise things
 	 * do not align properly at all. */
@@ -831,18 +831,15 @@ _eend(FILE * EINFO_RESTRICT fp, int col, ECOLOR color, const char *msg)
 	if (term_is_cons25)
 		cols--;
 
-	/* If extra spacing is required around msg, then please change
-	 * via a runtime knob and leave this default as is as it saves 2 
-	 * valuable columns when running on 80 column screens. */
 	if (cols > 0 && colour_terminal(fp)) {
-		fprintf(fp, "%s%s %s[%s%s%s]%s\n", up, tgoto(goto_column, 0, cols),
+		fprintf(fp, "%s%s %s[%s %s %s]%s\n", up, tgoto(goto_column, 0, cols),
 		    ecolor(ECOLOR_BRACKET), ecolor(color), msg,
 		    ecolor(ECOLOR_BRACKET), ecolor(ECOLOR_NORMAL));
 	} else {
 		if (col > 0)
 			for (i = 0; i < cols - col; i++)
 				fprintf(fp, " ");
-		fprintf(fp, " [%s]\n", msg);
+		fprintf(fp, " [ %s ]\n", msg);
 	}
 }
 
@@ -1030,7 +1027,7 @@ ebeginv(const char *EINFO_RESTRICT fmt, ...)
 
 	va_start(ap, fmt);
 	retval = _einfovn(fmt, ap);
-	retval += printf("...");
+	retval += printf(" ...");
 	if (colour_terminal(stdout))
 		retval += printf("\n");
 	va_end(ap);

src/librc/librc-depend.c

@@ -346,8 +346,9 @@ get_provided(const RC_DEPINFO *depinfo, const char *runlevel, int options)
 	    get_provided1(runlevel, providers, dt, bootlevel, false, RC_SERVICE_STOPPED))
 		return providers;
 
-	/* Still nothing? OK, list all services */
-	TAILQ_FOREACH(service, dt->services, entries)
+	/* Still nothing? OK, list our first provided service. */
+	service = TAILQ_FIRST(dt->services);
+	if (service != NULL)
 		rc_stringlist_add(providers, service->value);
 
 	return providers;

src/librc/librc.c

@@ -233,6 +233,8 @@ rc_sys(void)
 		return RC_SYS_VSERVER;
 	else if (exists("/proc/vz/veinfo") && !exists("/proc/vz/version"))
 		return RC_SYS_OPENVZ;
+	else if (file_regex("/proc/self/cgroup", ":/.+$"))
+		return RC_SYS_LXC;
 	else if (file_regex("/proc/self/status",
 		"envID:[[:space:]]*[1-9]"))
 		return RC_SYS_OPENVZ; /* old test */
@@ -375,7 +377,7 @@ rc_runlevel_stacks(const char *runlevel)
 }
 librc_hidden_def(rc_runlevel_stacks)
 
-/* Resolve a service name to it's full path */
+/* Resolve a service name to its full path */
 char *
 rc_service_resolve(const char *service)
 {

src/librc/rc.h.in

@@ -117,7 +117,7 @@ bool rc_runlevel_stopping(void);
 
 /*! @name RC
  * A service can be given as a full path or just its name.
- * If its just a name then we try to resolve the service to a full path.
+ * If it's just a name then we try to resolve the service to a full path.
  * This should allow the use if local init.d directories in the future. */
 
 /*! @brief States a service can be in */
@@ -268,6 +268,7 @@ bool rc_service_daemons_crashed(const char *);
  * Some services cannot work in these systems, or we do something else. */
 #define RC_SYS_JAIL    "JAIL"
 #define RC_SYS_OPENVZ  "OPENVZ"
+#define RC_SYS_LXC     "LXC"
 #define RC_SYS_PREFIX  "PREFIX"
 #define RC_SYS_UML     "UML"
 #define RC_SYS_VSERVER "VSERVER"
@@ -325,7 +326,7 @@ typedef void *RC_DEPTREE;
 #endif
 
 /*! Check to see if source is newer than target.
- * If target is a directory then we traverse it and it's children.
+ * If target is a directory then we traverse it and its children.
  * @param source
  * @param target
  * @param mtime of newest target
@@ -334,7 +335,7 @@ typedef void *RC_DEPTREE;
 bool rc_newer_than(const char *, const char *, time_t *, char *);
 
 /*! Check to see if source is older than target.
- * If target is a directory then we traverse it and it's children.
+ * If target is a directory then we traverse it and its children.
  * @param source
  * @param target
  * @param mtime of oldest target
@@ -445,7 +446,7 @@ RC_STRINGLIST *rc_config_load(const char *);
 /*! Return the value of the entry from a key=value list. */
 char *rc_config_value(RC_STRINGLIST *, const char *);
 
-/*! Check if a variable is a boolean and return it's value.
+/*! Check if a variable is a boolean and return its value.
  * If variable is not a boolean then we set errno to be ENOENT when it does
  * not exist or EINVAL if it's not a boolean.
  * @param variable to check
@@ -484,9 +485,9 @@ bool rc_stringlist_delete(RC_STRINGLIST *, const char *);
  * @return pointer to item */
 RC_STRING *rc_stringlist_find(RC_STRINGLIST *, const char *);
 
-/*! Split a string into a stringlist based on seperator.
+/*! Split a string into a stringlist based on separator.
  * @param string to split
- * @param seperator
+ * @param separator
  * @return new list */
 RC_STRINGLIST *rc_stringlist_split(const char *, const char *);
 

src/rc/.gitignore

@@ -38,6 +38,7 @@ service_crashed
 checkpath
 fstabinfo
 mountinfo
+swclock
 rc-depend
 service_get_value
 service_set_value
@@ -59,6 +60,7 @@ checkpath.o
 fstabinfo.o
 mountinfo.o
 start-stop-daemon.o
+swclock.o
 rc-applets.o
 rc-depend.o
 rc-logger.o

src/rc/Makefile

@@ -2,7 +2,7 @@ PROG=		rc
 SRCS=		checkpath.c fstabinfo.c mountinfo.c start-stop-daemon.c \
 		rc-applets.c rc-depend.c rc-logger.c \
 		rc-misc.c rc-plugin.c rc-service.c rc-status.c rc-update.c \
-		runscript.c rc.c
+		runscript.c rc.c swclock.c
 
 CLEANFILES=	version.h
 
@@ -26,7 +26,7 @@ RC_SBINLINKS=	mark_service_starting mark_service_started \
 		mark_service_stopping mark_service_stopped \
 		mark_service_inactive mark_service_wasinactive \
 		mark_service_hotplugged mark_service_failed \
-		rc-abort
+		rc-abort swclock
 ALL_LINKS=	${BINLINKS} ${SBINLINKS} ${RC_BINLINKS} ${RC_SBINLINKS}
 CLEANFILES+=	${ALL_LINKS}
 
@@ -46,12 +46,17 @@ LDADD+=		${LIBDL} ${LIBKVM}
 include ${MK}/${MKPAM}.mk
 
 ${SRCS}: version.h
-version.h:
-	echo "#define VERSION \"${VERSION}${GITVER}\"" >version.h
+
+.PHONY:	version.h.tmp
+version.h.tmp:
+	echo "#define VERSION \"${VERSION}${GITVER}\"" >$@
 	if test -n "${BRANDING}"; then \
-		echo "#define BRANDING \"${BRANDING}\"" >> version.h; \
+		echo "#define BRANDING \"${BRANDING}\"" >> $@; \
 	fi
 
+version.h: version.h.tmp
+	cmp -s $@.tmp $@ && rm $@.tmp || mv $@.tmp $@
+
 install: all
 	${INSTALL} -d ${DESTDIR}${SBINDIR}
 	${INSTALL} -m ${BINMODE} ${PROG} ${DESTDIR}${SBINDIR}

src/rc/builtins.h

@@ -35,6 +35,7 @@ int rc_status(int, char **);
 int rc_update(int, char **);
 int runscript(int, char **);
 int start_stop_daemon(int, char **);
+int swclock(int, char **);
 
 void run_applets(int, char **);
 

src/rc/fstabinfo.c

@@ -38,7 +38,7 @@
 #include <string.h>
 #include <unistd.h>
 
-/* Yay for linux and it's non liking of POSIX functions.
+/* Yay for linux and its non liking of POSIX functions.
    Okay, we could use getfsent but the man page says use getmntent instead
    AND we don't have getfsent on uclibc or dietlibc for some odd reason. */
 #ifdef __linux__

src/rc/rc-applets.c

@@ -449,6 +449,8 @@ run_applets(int argc, char **argv)
 		exit(start_stop_daemon(argc, argv));
 	else if (strcmp (applet, "checkpath") == 0)
 		exit(checkpath(argc, argv));
+	else if (strcmp(applet, "swclock") == 0)
+		exit(swclock(argc, argv));
 
 	/* These could also be applications in their own right */
 	if (strcmp(applet, "shell_var") == 0)
@@ -465,7 +467,7 @@ run_applets(int argc, char **argv)
 		}
 		exit(EXIT_FAILURE);
 	};
-	/* This tets is correct as it's not present in baselayout */
+	/* This test is correct as it's not present in baselayout */
 	if (strcmp(applet, "is_newer_than") == 0) {
 		if (argc < 3)
 			exit (EXIT_FAILURE);

src/rc/rc-update.c

@@ -219,6 +219,7 @@ static const char * const longopts_help[] = {
 int
 rc_update(int argc, char **argv)
 {
+	RC_DEPTREE *deptree;
 	RC_STRINGLIST *runlevels;
 	RC_STRING *runlevel;
 	char *service = NULL;
@@ -238,7 +239,9 @@ rc_update(int argc, char **argv)
 		    stack = true;
 		break;
 		case 'u':
-			_rc_deptree_load(-1, &ret);
+			deptree = _rc_deptree_load(-1, &ret);
+			if (deptree)
+				rc_deptree_free(deptree);
 			return ret;
 			case_RC_COMMON_GETOPT;
 		}

src/rc/rc.c

@@ -773,7 +773,7 @@ handle_bad_signal(int sig)
 #endif
 
 #include "_usage.h"
-#define getoptstring "o:" getoptstring_COMMON
+#define getoptstring "o:s:S" getoptstring_COMMON
 static const struct option longopts[] = {
 	{ "override", 1, NULL, 'o' },
 	{ "service",  1, NULL, 's' },

src/rc/runscript.c

@@ -350,6 +350,8 @@ svc_exec(const char *arg1, const char *arg2)
 	size_t bytes;
 	bool prefixed = false;
 	int slave_tty;
+	sigset_t sigchldmask;
+	sigset_t oldmask;
 
 	/* Setup our signal pipe */
 	if (pipe(signal_pipe) == -1)
@@ -439,10 +441,17 @@ svc_exec(const char *arg1, const char *arg2)
 	}
 
 	free(buffer);
+
+	sigemptyset (&sigchldmask);
+	sigaddset (&sigchldmask, SIGCHLD);
+	sigprocmask (SIG_BLOCK, &sigchldmask, &oldmask);
+
 	close(signal_pipe[0]);
 	close(signal_pipe[1]);
 	signal_pipe[0] = signal_pipe[1] = -1;
 
+	sigprocmask (SIG_SETMASK, &oldmask, NULL);
+	
 	if (master_tty >= 0) {
 		/* Why did we do this? */
 		/* signal (SIGWINCH, SIG_IGN); */
@@ -739,6 +748,8 @@ svc_start_deps(void)
 		free(tmp);
 	}
 
+	rc_stringlist_free(tmplist);
+	tmplist = NULL;
 	rc_stringlist_free(services);
 	services = NULL;
 }
@@ -998,7 +1009,7 @@ svc_restart(void)
 	 * dns via resolvconf, so you could have openvpn trying to restart
 	 * dnsmasq which in turn is waiting on net which in turn is waiting
 	 * on dnsmasq.
-	 * The work around is for resolvconf to restart it's services with
+	 * The work around is for resolvconf to restart its services with
 	 * --nodeps which means just that.
 	 * The downside is that there is a small window when our status is
 	 * invalid.
@@ -1106,7 +1117,7 @@ runscript(int argc, char **argv)
 	atexit(cleanup);
 
 	/* We need to work out the real full path to our service.
-	 * This works fine, provided that we ONLY allow mulitplexed services
+	 * This works fine, provided that we ONLY allow multiplexed services
 	 * to exist in the same directory as the master link.
 	 * Also, the master link as to be a real file in the init dir. */
 	if (!realpath(argv[1], path)) {
@@ -1192,7 +1203,7 @@ runscript(int argc, char **argv)
 
 	deps = true;
 	
-	/* Punt the first arg as it's our service name */
+	/* Punt the first arg as its our service name */
 	argc--;
 	argv++;
 
@@ -1316,6 +1327,12 @@ runscript(int argc, char **argv)
 			prefix = NULL;
 			retval = svc_exec("status", NULL);
 		} else {
+			if (strcmp(optarg, "pause") == 0) {
+				ewarn("WARNING: 'pause' is deprecated; please use '--nodeps stop'");
+				deps = false;
+				optarg = "stop";
+			}
+
 			if (strcmp(optarg, "conditionalrestart") == 0 ||
 			    strcmp(optarg, "condrestart") == 0)
 			{

src/rc/start-stop-daemon.c

@@ -37,6 +37,7 @@
 #define POLL_INTERVAL   20000000
 #define WAIT_PIDFILE   500000000
 #define ONE_SECOND    1000000000
+#define ONE_MS           1000000
 
 #include <sys/types.h>
 #include <sys/ioctl.h>
@@ -46,6 +47,10 @@
 #include <sys/time.h>
 #include <sys/wait.h>
 
+#ifdef __linux__
+#include <sys/syscall.h> /* For io priority */
+#endif
+
 #include <ctype.h>
 #include <errno.h>
 #include <fcntl.h>
@@ -103,6 +108,13 @@ static char *changeuser, *ch_root, *ch_dir;
 
 extern char **environ;
 
+#ifdef __linux__
+static inline int ioprio_set(int which, int who, int ioprio)
+{
+	return syscall(SYS_ioprio_set, which, who, ioprio);
+}
+#endif
+
 static void
 free_schedulelist(void)
 {
@@ -588,8 +600,9 @@ expand_home(const char *home, const char *path)
 }
 
 #include "_usage.h"
-#define getoptstring "KN:PR:Sbc:d:e:g:ik:mn:op:s:tu:r:w:x:1:2:" getoptstring_COMMON
+#define getoptstring "I:KN:PR:Sbc:d:e:g:ik:mn:op:s:tu:r:w:x:1:2:" getoptstring_COMMON
 static const struct option longopts[] = {
+	{ "ionice",       1, NULL, 'I'},
 	{ "stop",         0, NULL, 'K'},
 	{ "nicelevel",    1, NULL, 'N'},
 	{ "retry",        1, NULL, 'R'},
@@ -618,6 +631,7 @@ static const struct option longopts[] = {
 	longopts_COMMON
 };
 static const char * const longopts_help[] = {
+	"Set an ionice class:data when starting", 
 	"Stop daemon",
 	"Set a nicelevel when starting",
 	"Retry schedule to use when stopping",
@@ -638,7 +652,7 @@ static const char * const longopts_help[] = {
 	"Test actions, don't do them",
 	"Change the process user",
 	"Chroot to this directory",
-	"Seconds to wait for daemon start",
+	"Milliseconds to wait for daemon start",
 	"Binary to start/stop",
 	"Redirect stdout to file",
 	"Redirect stderr to file",
@@ -674,7 +688,7 @@ start_stop_daemon(int argc, char **argv)
 	char *pidfile = NULL;
 	char *retry = NULL;
 	int sig = -1;
-	int nicelevel = 0;
+	int nicelevel = 0, ionicec = -1, ioniced = 0;
 	bool background = false;
 	bool makepidfile = false;
 	bool interpreted = false;
@@ -737,6 +751,17 @@ start_stop_daemon(int argc, char **argv)
 	while ((opt = getopt_long(argc, argv, getoptstring, longopts,
 		    (int *) 0)) != -1)
 		switch (opt) {
+		case 'I': /* --ionice */
+			if (sscanf(optarg, "%d:%d", &ionicec, &ioniced) == 0)
+				eerrorx("%s: invalid ionice `%s'",
+				    applet, optarg);
+			if (ionicec == 0)
+				ioniced = 0;
+			else if (ionicec == 3)
+				ioniced = 7;
+			ionicec <<= 13; /* class shift */
+			break;
+
 		case 'K':  /* --stop */
 			stop = true;
 			break;
@@ -1120,6 +1145,14 @@ start_stop_daemon(int argc, char **argv)
 				    strerror(errno));
 		}
 
+/* Only linux suports setting an IO priority */
+#ifdef __linux__
+		if (ionicec != -1 &&
+		    ioprio_set(1, mypid, ionicec | ioniced) == -1)
+			eerrorx("%s: ioprio_set %d %d: %s", applet,
+			    ionicec, ioniced, strerror(errno));
+#endif
+
 		if (ch_root && chroot(ch_root) < 0)
 			eerrorx("%s: chroot `%s': %s",
 			    applet, ch_root, strerror(errno));
@@ -1311,8 +1344,8 @@ start_stop_daemon(int argc, char **argv)
 		struct timespec ts;
 		bool alive = false;
 		
-		ts.tv_sec = start_wait;
-		ts.tv_nsec = 0;
+		ts.tv_sec = start_wait / 1000;
+		ts.tv_nsec = (start_wait % 1000) * ONE_MS;
 		if (nanosleep(&ts, NULL) == -1) {
 			if (errno == EINTR)
 				eerror("%s: caught an interrupt", applet);

src/rc/swclock.c

@@ -0,0 +1,120 @@
+/*
+  swclock.c
+  Sets the system time from the mtime of the given file.
+  This is useful for systems who do not have a working RTC and rely on ntp.
+  OpenRC relies on the correct system time for a lot of operations so this is needed
+  quite early.
+*/
+
+/*
+ * Copyright (c) 2009 Roy Marples <roy@marples.name>
+ * All rights reserved
+
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/time.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#include <errno.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <unistd.h>
+#include <utime.h>
+
+#include "builtins.h"
+#include "einfo.h"
+#include "rc-misc.h"
+
+#define RC_SHUTDOWNTIME    RC_SVCDIR "/shutdowntime"
+
+extern const char *applet;
+
+#include "_usage.h"
+#define extraopts "file"
+#define getoptstring "sw" getoptstring_COMMON
+static const struct option longopts[] = {
+	{ "save", 0, NULL, 's' },
+	{ "warn", 0, NULL, 'w' },
+	longopts_COMMON
+};
+static const char * const longopts_help[] = {
+	"saves the time",
+	"no error if no reference file",
+	longopts_help_COMMON
+};
+#include "_usage.c"
+
+int
+swclock(int argc, char **argv)
+{
+	int opt, sflag = 0, wflag = 0;
+	const char *file = RC_SHUTDOWNTIME;
+	struct stat sb;
+	struct timeval tv;
+
+	while ((opt = getopt_long(argc, argv, getoptstring,
+		    longopts, (int *) 0)) != -1)
+	{
+		switch (opt) {
+		case 's':
+			sflag = 1;
+			break;
+		case 'w':
+			wflag = 1;
+			break;
+		case_RC_COMMON_GETOPT;
+		}
+	}
+
+	if (optind < argc)
+		file = argv[optind++];
+
+	if (sflag) {
+		if (stat(file, &sb) == -1) {
+			opt = open(file, O_WRONLY | O_CREAT, 0644);
+			if (opt == -1)
+				eerrorx("swclock: open: %s", strerror(errno));
+			close(opt);
+		} else
+			if (utime(file, NULL) == -1)
+				eerrorx("swclock: utime: %s", strerror(errno));
+		return 0;
+	}
+
+	if (stat(file, &sb) == -1) {
+		if (wflag != 0 && errno == ENOENT)
+			ewarn("swclock: `%s': %s", file, strerror(errno));
+		else
+			eerrorx("swclock: `%s': %s", file, strerror(errno));
+		return 0;
+	}
+
+	tv.tv_sec = sb.st_mtime;
+	tv.tv_usec = 0;
+
+	if (settimeofday(&tv, NULL) == -1)
+		eerrorx("swclock: settimeofday: %s", strerror(errno));
+
+	return 0;
+}