Release openrc-0.6.0

Fixes #204

Makefile

@@ -4,7 +4,7 @@
 
 include Makefile.inc
 
-SUBDIR=		conf.d etc init.d man sh src
+SUBDIR=		conf.d etc init.d man scripts sh src
 
 # Build our old net foo or not
 _OLDNET_SH=	case "${MKOLDNET}" in \

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.5.1
+VERSION=	0.6.0
 PKG=		${NAME}-${VERSION}

README

@@ -58,7 +58,8 @@ If you installed OpenRC from your chosen distribution, you should report
 bugs directly to them. For example, if you use Gentoo and emerged OpenRC
 then you should reports bugs to http://bugs.gentoo.org.
 
-Otherwise, you can report them directly to me at http://bugs.marples.name
+Otherwise, you can report them directly to me at
+http://roy.marples.name/projects/openrc
 
 
 History - by Roy Marples

README.net

@@ -0,0 +1,36 @@
+OpenRC Network Ideals
+---------------------
+
+The new style networking for OpenRC is very simplistic - provide a basic means
+of configuring static interface address and routes whilst allowing the
+possibility to run any command at any point.
+
+In a nutshell, init.d/network is a wrapper around ifconfig(8) and
+init.d/staticroute is wrapper around route(8).
+
+In the Perfect World (TM) ifconfig should be able to configure everything
+about the interface easily * . The BSD family almost get this right and Linux
+epically fails.
+
+* Only static confguration, including link setup.
+For dynmaic, static, IPv4LL, arping and per ssid IPv4 setup dhcpcd-5.x
+provides your needs.
+
+It fails because there are many tools to do the same job and often have
+vastly different syntax where they could be similar. In other words, there
+is no coherence.
+
+OpenRC-0.4.x and older (inc Gentoo baselayout-1) had a collection of scripts
+for each tool and allowed a script per interface. Over the years, this design
+has proven very hard to maintain as each user has their own idea of how
+things should work. Also, there were (and still are) race conditions.
+
+So where do we go from here?
+Well, it's possible to use the new network scripts using the tools
+currently available. It's just harder as you have to know them and their
+documentation can be lacking at times.
+The correct end goal is a BSD style ifconfig tool.
+I've started work on it, but the project has stalled somewhat.
+It's display only right now and the source is not yet publically available.
+If you have the skills and share the vision then contact me privately and
+we'll take it from there.

conf.d/.gitignore

@@ -1 +1,2 @@
 network
+staticroute

conf.d/Makefile

@@ -1,14 +1,19 @@
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname local localmount network urandom
+CONF=	bootmisc fsck hostname local localmount network staticroute urandom
 
-TARGETS+=	network
-CLEANFILES+=	network
+TARGETS+=	network staticroute
+CLEANFILES+=	network staticroute
 
 MK=	../mk
 include ${MK}/os.mk
 include Makefile.${OS}
 include ${MK}/scripts.mk
 
+SOS?=	BSD
+
 network: network.in network.${OS}
-	cp network.in network
-	[ -e network.${OS} ] && cat network.${OS} >> network || true
+	cp $@.in $@
+	[ -e $@.${SOS} ] && cat $@.${SOS} >> $@ || true
+
+staticroute: staticroute.${SOS}
+	cp $@.${SOS} $@

conf.d/Makefile.FreeBSD

@@ -1,3 +1 @@
 CONF+=	ipfw moused powerd rarpd savecore syscons
-
-network.${OS}:

conf.d/Makefile.Linux

@@ -1 +1,2 @@
 CONF+=	consolefont dmesg hwclock keymaps modules
+SOS=	Linux

conf.d/Makefile.NetBSD

@@ -1,3 +1 @@
 CONF+=	moused rarpd savecore
-
-network.${OS}:

conf.d/fsck

@@ -13,6 +13,11 @@
 #fsck_passno=">1"
 #fsck_passno="<2"
 
+# Most modern fs's don't require a full fsck on boot, but for those that do
+# it may be advisable to skip this when running on battery.
+# WARNING: Do not turn this off if you have any JFS partitions.
+fsck_on_battery="YES"
+
 # fsck_shutdown causes fsck to trigger during shutdown as well as startup.
 # The end result of this is that if any periodic non-root filesystem checks are
 # scheduled, under normal circumstances the actual check will happen during

conf.d/hwclock

@@ -1,11 +1,11 @@
-# Set CLOCK to "UTC" if your system clock is set to UTC (also known as
-# Greenwich Mean Time).  If your clock is set to the local time, then 
+# Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
+# Greenwich Mean Time).  If that clock is set to the local time, then 
 # set CLOCK to "local".  Note that if you dual boot with Windows, then 
 # you should set it to "local".
 clock="UTC"
 
 # If you want to set the Hardware Clock to the current System Time 
-# during shutdown, then say "YES" here.
+# (software clock) during shutdown, then say "YES" here.
 # You normally don't need to do this if you run a ntp daemon.
 clock_systohc="NO"
 

conf.d/network.BSD

@@ -0,0 +1,4 @@
+
+# You can assign a default route
+#defaultroute="192.168.0.1"
+#defaultroute6="2001:a:b:c"

conf.d/network.Linux

@@ -1,8 +1,20 @@
+
+# You can assign a default route
+#defaultroute="gw 192.168.0.1"
+#defaultroute6="gw 2001:a:b:c"
+
 # ifconfig under Linux is not that powerful and doesn't easily handle
 # multiple addresses
 # On the other hand, ip (iproute2) is quite powerful and is also supported
 #ip_eth0="192.168.0.10/24; 192.168.10.10/24"
 
+# You can also use ip to add the default route.
+#defaultiproute="via 192.168.0.1"
+#defaultiproute6="via 2001:a:b:c"
+
+# ip doesn't handle MTU like ifconfig, but we can do it like so
+#ifup_eth0="ip link set \$int mtu 1500"
+
 # Create a bonded interface
 #interfaces="bond0"
 #ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"

conf.d/network.in

@@ -9,8 +9,6 @@
 # You should note that we don't stop the network at system shutdown by default.
 # If you really need this, then set shutdown_network=YES
 
-# You can assign a default route
-#defaultroute="192.168.0.1"
 # Lastly, the interfaces variable pulls in virtual interfaces that cannot
 # be automatically detected.
 #interfaces="br0 bond0 vlan0"
@@ -26,3 +24,5 @@
 # If you require DHCP, you should install dhcpcd and it to the boot or
 # default runlevel.
 
+# NIS users can set the domain name here
+#domainname="foobar"

conf.d/staticroute.BSD

@@ -0,0 +1,6 @@
+# Separate multiple routes using ; or new lines.
+# /etc/route.conf(5) takes precedence over this configuration.
+
+# Example static routes. See route(8) for syntax.
+#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
+#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.Linux

@@ -0,0 +1,8 @@
+# Separate multiple routes using ; or new lines.
+
+# Example static routes. See route(8) for syntax.
+#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
+#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
+
+# Example static routes using iproute2. See ip(8) for syntax.
+#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"

doc/net.example.BSD.in

@@ -43,11 +43,6 @@
 #       (eth0:1, eth0:2, etc)
 #       iproute2 does not do this as there is no need to
 #config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
-# Or you can use sequence expressions
-#config_eth0="192.168.0.{2..4}/24"  FIXME - may not work with baselayout2
-# which does the same as above. Be careful though as if you use this and
-# fallbacks, you have to ensure that both end up with the same number of
-# values otherwise your fallback won't work correctly.
 
 # You can also use IPv6 addresses
 # (you should always specify a prefix length with IPv6 here)
@@ -242,12 +237,12 @@
 
 ##################################################
 # wpa_supplicant
-# emerge net-wireless/wpa-supplicant
+# emerge net-wireless/wpa_supplicant
 # Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Console the wpa_supplicant.conf.example that is installed in
+# Consult the wpa_supplicant.conf.example that is installed in
 # /usr/share/doc/wpa_supplicant
 
-# By default we don't wait for wpa_suppliant to associate and authenticate.
+# By default we don't wait for wpa_supplicant to associate and authenticate.
 # If you would like to, so can specify how long in seconds
 #associate_timeout_eth0=60
 # A value of 0 means wait forever.

doc/net.example.Linux.in

@@ -70,11 +70,6 @@
 #       iproute2 does not do this as there is no need to
 #config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
 # However, that only works with CIDR addresses, so you can't use netmask.
-# Or you can use sequence expressions
-#config_eth0="192.168.0.{2..4}/24"
-# which does the same as above. Be careful though as if you use this and
-# fallbacks, you have to ensure that both end up with the same number of
-# values otherwise your fallback won't work correctly.
 
 # You can also use IPv6 addresses
 # (you should always specify a prefix length with IPv6 here)
@@ -341,16 +336,16 @@
 
 ############################################################
 # wpa_supplicant
-# emerge net-wireless/wpa-supplicant
+# emerge net-wireless/wpa_supplicant
 # Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Console the wpa_supplicant.conf.example that is installed in
+# Consult the wpa_supplicant.conf.example that is installed in
 # /usr/share/doc/wpa_supplicant
 # To configure wpa_supplicant
 #wpa_supplicant_ath0="-Dmadwifi" # For Atheros based cards
 # Consult wpa_supplicant for more drivers - the default is -Dwext which should
 # work for most cards.
 
-# By default we don't wait for wpa_suppliant to associate and authenticate.
+# By default we don't wait for wpa_supplicant to associate and authenticate.
 # If you need to change this behaviour then you don't know how our scripts work
 # and setting this value could cause strange things to happen.
 # If you would like to, so can specify how long in seconds.
@@ -1003,7 +998,7 @@
 #		else
 #			for x; do
 #				ebegin "${x}"
-#				ip rule add ${x} dev "${IFACE}"
+#				ip rule add ${x}
 #				eend $?
 #			done
 #		fi

etc/rc.conf.in

@@ -76,7 +76,7 @@
 #unicode="NO"
 
 # Network fstypes. Below is the default.
-net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
+net_fs_list="afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs nfs nfs4 ocfs2 shfs smbfs"
 
 ##############################################################################
 # SERVICE CONFIGURATION VARIABLES

init.d.misc/.gitignore

@@ -0,0 +1,11 @@
+avahi-dnsconfd
+avahid
+dhcpcd
+dbus
+hald
+named
+ntpd
+openvpn
+polkitd
+sshd
+wpa_supplicant

init.d/.gitignore

@@ -24,6 +24,7 @@ mount-ro
 mtab
 numlock
 procfs
+staticroute
 sysfs
 devdb
 hostid
@@ -34,6 +35,7 @@ rc-enabled
 rpcbind
 savecore
 swap-blk
+swclock
 syslogd
 termencoding
 ttys

init.d/Makefile

@@ -1,6 +1,7 @@
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
-	network.in root.in savecache.in swap.in sysctl.in urandom.in
+	network.in root.in savecache.in staticroute.in swap.in swclock.in \
+	sysctl.in urandom.in
 BIN=	${OBJS}
 
 # Build our old net foo or not

init.d/bootmisc.in

@@ -95,7 +95,7 @@ start()
 		for x in "" $xtra; do
 			mkutmp /var/run/utmp$x
 		done
-		[ -e /var/log/wtmp ] && mkutmp /var/log/wtmp
+		[ -e /var/log/wtmp ] || mkutmp /var/log/wtmp
 		eend 0
 
 		ebegin "Cleaning /var/run"

init.d/fsck.in

@@ -9,7 +9,7 @@ _IFS="
 depend()
 {
 	use dev clock modules
-	keyword -jail -openvz -prefix -timeout -vserver
+	keyword -jail -openvz -prefix -timeout -vserver -lxc
 }
 
 _abort() {
@@ -30,38 +30,6 @@ _forcefsck()
 	[ -e /forcefsck ] || get_bootparam forcefsck
 }
 
-_on_ac_power()
-{
-	if [ -f /proc/acpi/ac_adapter/AC/state ]; then
-		cat /proc/acpi/ac_adapter/AC/state | while read line; do
-			case "$line" in
-			"state:"*"off-line") return 128;;
-			esac
-		done
-	elif [ -f /proc/pmu/info ]; then
-		cat /proc/pmu/info | while read line; do
-			case "$line" in
-			"AC Power"*": 0") return 128;;
-			esac
-		done
-	elif type envstat >/dev/null 2>&1; then
-		# NetBSD has envstat
-		envstat -d acpiacad0 2>/dev/null | while read line; do
-			case "$line" in
-			"connected:"*"OFF") return 128;;
-			esac
-		done
-	elif sysctl -q hw.acpi.acline >/dev/null 2>/dev/null; then
-		case $(sysctl -n hw.acpi.acline) in
-		0) return 1;;
-		*) return 0;;
-		esac
-	else
-		return 0
-	fi
-	[ $? != 128 ]
-}
-
 start()
 {
 	local fsck_opts= p= check_extra=
@@ -73,7 +41,7 @@ start()
 	if _forcefsck; then
 		fsck_opts="$fsck_opts -f"
 		check_extra="(check forced)"
-	elif ! _on_ac_power; then
+	elif ! yesno ${fsck_on_battery:-YES} && ! on_ac_power; then
 		ewarn "Skipping fsck due to not being on AC power"
 		return 0
 	fi

init.d/hwclock.in

@@ -28,7 +28,7 @@ depend()
 	else
 		before *
 	fi
-	keyword -openvz -prefix -uml -vserver -xenu
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 setupopts()

init.d/keymaps.in

@@ -15,7 +15,7 @@ start()
 {
 	ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 	: ${unicode:=$UNICODE}
-	: =${keymap:=$KEYMAP}
+	: ${keymap:=$KEYMAP}
 	: ${extended_keymaps:=$EXTENDED_KEYMAPS}
 	: ${windowkeys:=$SET_WINDOWSKEYS} 
 	: ${fix_euro:=$FIX_EURO}
@@ -34,15 +34,25 @@ start()
 		echo 1 > /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
 	fi
 
-	ebegin "Loading key mappings [$keymap]"
-	local loadkeys_uni= wkeys= kmode="-a" msg="ASCII"
+	local wkeys= kmode="-a" msg="ASCII"
 	if yesno $unicode; then
-		loadkeys_uni="--unicode"
 		kmode="-u"
 		msg="UTF-8"
 	fi
 	yesno $windowkeys && wkeys="windowkeys"
-	loadkeys -q $loadkeys_uni $wkeys $keymap $extended_keymaps
+
+	# Set terminal encoding to either ASCII or UNICODE.
+	# See utf-8(7) for more information.
+	ebegin "Setting keyboard mode [$msg]"
+	n=1
+	while [ $n -le $ttyn ]; do
+		kbd_mode $kmode -C $ttydev$n
+		n=$(($n + 1))
+	done
+	eend 0
+
+	ebegin "Loading key mappings [$keymap]"
+	loadkeys -q $wkeys $keymap $extended_keymaps
 	eend $? "Error loading key mappings" || return $?
 
 	if yesno $fix_euro; then
@@ -52,20 +62,6 @@ start()
 		eend $?
 	fi
 
-	# Set terminal encoding to either ASCII or UNICODE.
-	# See utf-8(7) for more information.
-	ebegin "Setting keyboard mode [$msg]"
-	if yesno $unicode; then
-		dumpkeys ${dumpkeys_charset:+-c} \
-			$dumpkeys_charset | loadkeys --unicode
-	fi
-	n=1
-	while [ $n -le $ttyn ]; do
-		kbd_mode $kmode -C $ttydev$n
-		n=$(($n + 1))
-	done
-	eend 0
-
 	# Save the keymapping for use immediately at boot
 	if [ -w "$RC_LIBEXECDIR" ]; then
 		mkdir -p "$RC_LIBEXECDIR"/console

init.d/localmount.in

@@ -8,7 +8,7 @@ depend()
 {
 	need fsck
 	use lvm modules mtab
-	keyword -jail -openvz -prefix -vserver
+	keyword -jail -openvz -prefix -vserver -lxc
 }
 
 start()

init.d/modules.in

@@ -7,7 +7,7 @@ description="Loads a user defined list of kernel modules."
 depend()
 {
 	use isapnp
-	keyword -openvz -prefix -vserver
+	keyword -openvz -prefix -vserver -lxc
 }
 
 start()

init.d/mount-ro.in

@@ -7,7 +7,7 @@ description="Re-mount filesytems read-only for a clean reboot."
 depend()
 {
 	need killprocs savecache
-	keyword -prefix -openvz -vserver
+	keyword -prefix -openvz -vserver -lxc
 }
 
 start()

init.d/network.in

@@ -103,13 +103,28 @@ dumpargs()
 	esac
 }
 
+intup=false
 runip()
 {
 	local int="$1" err=
-
 	shift
+
+	# Ensure we have a valid broadcast address
+	case "$@" in
+	*" broadcast "*|*" brd "*) ;;
+	*:*) ;; # Ignore IPv6
+	*) set -- "$@" brd +;;
+	esac
+
 	err=$(LC_ALL=C ip address add "$@" dev "$int" 2>&1)
-	[ -z "$err" ] && return 0
+	if [ -z "$err" ]; then
+		# ip does not bring up the interface when adding addresses
+		if ! $intup; then
+			ip link set "$int" up
+			intup=true
+		fi
+		return 0
+	fi
 	if [ "$err" = "RTNETLINK answers: File exists" ]; then
 		ip address del "$@" dev "$int" 2>/dev/null
 	fi
@@ -122,6 +137,7 @@ routeflush()
 	if [ "$RC_UNAME" = Linux ]; then
 		if [ -x /sbin/ip ]; then
 			ip route flush scope global
+			ip route delete default 2>/dev/null
 		else
 			# Sadly we also delete some link routes, but
 			# this cannot be helped
@@ -141,6 +157,8 @@ routeflush()
 				esac
 				route del $flags $dest $netmask $xtra
 			done
+			# Erase any default dev eth0 routes
+			route del default 2>/dev/null
 		fi
 	else
 		route -qn flush
@@ -165,6 +183,16 @@ runargs()
 start()
 {
 	local cr=0 r= int= intv= cmd= args= upcmd=
+
+	if [ -z "$domainname" -a -s /etc/defaultdomain ]; then
+		domainname=$(cat /etc/defaultdomain)
+	fi
+	if [ -n "$domainname" ]; then
+		ebegin "Setting NIS domainname: $domainname"
+		domainname "$domainname"
+		eend $?
+	fi
+
 	einfo "Starting network"
 	routeflush
 	if [ "$RC_UNAME" = "Linux" ]; then
@@ -194,7 +222,7 @@ start()
 			-f /etc/ifup."$int" -o -f "$cf" ] || continue
 		veinfo "$int"
 		case "$func" in
-		ip)	func=runip;;
+		ip)	func=runip; intup=false;;
 		esac
 		eindent
 		runargs /etc/ifup."$int" "$upcmd"
@@ -225,11 +253,26 @@ start()
 
 	if [ -n "$defaultroute" ]; then
 		ebegin "Setting default route $defaultroute"
+		route add default $defaultroute
+		eend $?
+	elif [ -n "$defaultiproute" ]; then
+		ebegin "Setting default route $defaultiproute"
+		ip route add default $defaultiproute
+		eend $?
+	fi
+
+	if [ -n "$defaultroute6" ]; then
+		ebegin "Setting default route $defaultroute6"
 		if [ "$RC_UNAME" = Linux ]; then
-			route add default gw $defaultroute
+			routecmd="route -A inet6 add"
 		else
-			route add default $defaultroute
+			routecmd="route -inet6 add"
 		fi
+		$routecmd default $defaultroute6
+		eend $?
+	elif [ -n "$defaultiproute6" ]; then
+		ebegin "Setting default route $defaultiproute6"
+		ip -f inet6 route add default $defaultiproute6
 		eend $?
 	fi
 
@@ -258,6 +301,11 @@ stop()
 		then
 			veinfo "$int"
 			runargs /etc/ifdown."$int" "$downcmd"
+			if [ -x /sbin/ip ]; then
+				# We need to do this, otherwise we may
+				# fail to add things correctly on restart
+				ip address flush dev "$int" 2>/dev/null
+			fi
 			ifconfig "$int" down 2>/dev/null
 			ifconfig "$int" destroy 2>/dev/null
 		fi

init.d/numlock.in

@@ -9,7 +9,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 depend()
 {
 	need localmount
-	keyword -openvz -prefix -vserver
+	keyword -openvz -prefix -vserver -lxc
 }
 
 _setleds()

init.d/procfs.in

@@ -8,7 +8,7 @@ depend()
 {
 	use modules devfs
 	need localmount
-	keyword -openvz -prefix -vserver
+	keyword -openvz -prefix -vserver -lxc
 }
 
 start()

init.d/root.in

@@ -7,7 +7,7 @@ description="Mount the root fs read/write"
 depend()
 {
 	need fsck
-	keyword -jail -openvz -prefix -vserver
+	keyword -jail -openvz -prefix -vserver -lxc
 }
 
 start()

init.d/savecache.in

@@ -22,7 +22,7 @@ start()
 		fi
 	fi
 	local save=
-	for x in deptree depconfig softlevel nettree rc.log; do
+	for x in deptree depconfig shutdowntime softlevel nettree rc.log; do
 		[ -e "$RC_SVCDIR/$x" ] && save="$save $RC_SVCDIR/$x"
 	done
 	if [ -n "$save" ]; then

init.d/staticroute.in

@@ -0,0 +1,104 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+# This script was inspired by the equivalent rc.d staticroute from NetBSD.
+
+description="Configures static routes."
+__nl="
+"
+
+depend()
+{
+	provide net
+	use network
+	keyword -jail -prefix -vserver
+}
+
+pre_flight_checks()
+{
+	route=route
+	[ -s /etc/route.conf ] && return 0
+
+	if [ -n "$staticiproute" ]; then
+		route="ip route"
+		staticroute="$staticiproute"
+	fi
+}
+
+dump_args()
+{
+	# Route configuration file, as used by the NetBSD RC system
+	if [ -s /etc/route.conf ]; then
+		cat /etc/route.conf
+		return $?
+	fi
+
+	case "$staticroute" in
+	*"$__nl"*)
+		echo "$staticroute"
+		;;
+	*)
+		(
+			set -o noglob
+			IFS=';'; set -- $staticroute
+			IFS="$__nl"; echo "$*"
+		)
+		;;
+	esac
+}
+
+do_routes()
+{
+	local xtra= family=
+	[ "$RC_UNAME" != Linux ] && xtra=-q
+
+	ebegin "$1 static routes"
+	eindent
+	pre_flight_checks
+	dump_args | while read args; do
+		[ -z "$args" ] && continue
+		case "$args" in
+		"#"*)
+			;;
+		"+"*)
+			[ $2 = "add" ] && eval ${args#*+}
+			;;
+		"-"*)
+			[ $2 = "del" -o $2 = "delete" ] && eval ${args#*-}
+			;;
+		*)
+			veinfo "$args"
+			case "$route" in
+			"ip route")
+				ip route $2 $args
+				;;
+			*)
+				# Linux route does cannot work it out ...
+				if [ "$RC_UNAME" = Linux ]; then
+					case "$args" in
+					*:*) family="-A inet6";;
+					*) family=;;
+					esac
+				fi
+				route $famly $xtra $2 -$args
+				;;
+			esac
+			veend $?
+		esac
+	done
+	eoutdent
+	eend 0
+}
+
+start()
+{
+	do_routes "Adding" "add"
+}
+
+stop()
+{
+	local cmd="delete"
+	[ "$RC_UNAME" = Linux ] && cmd="del"
+	do_routes "Deleting" "$cmd"
+}

init.d/swap.in

@@ -5,7 +5,7 @@
 depend()
 {
 	need localmount
-	keyword -jail -openvz -prefix -vserver
+	keyword -jail -openvz -prefix -vserver -lxc
 }
 
 start()

init.d/swclock.in

@@ -0,0 +1,28 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+description="Sets the local clock to the mtime of a given file."
+
+depend()
+{
+	before *
+	provide clock
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
+}
+
+# swclock is an OpenRC built in
+
+start()
+{
+	ebegin "Setting the local clock based on last shutdown time"
+	swclock --warn
+	eend $?
+}
+
+stop()
+{
+	ebegin "Saving the shutdown time"
+	swclock --save
+	eend $?
+}

init.d/sysctl.BSD.in

@@ -12,13 +12,21 @@ depend()
 start()
 {
 	[ -e /etc/sysctl.conf ] || return 0
-	local retval=0 var= comments=
+	local retval=0 var= comments= conf=
 	ebegin "Configuring kernel parameters"
-	while read var comments; do
-		case "$var" in
-			""|"#"*) continue;;
-		esac
-		sysctl -w "$var" >/dev/null || retval=1
-	done < /etc/sysctl.conf
+	eindent
+	for conf in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
+		if [ -r "$conf" ]; then
+			vebegin "applying $conf"
+			while read var comments; do
+				case "$var" in
+				""|"#"*) continue;;
+				esac
+				sysctl -w "$var" >/dev/null || retval=1
+			done < "$conf"
+			veend $retval
+		fi
+	done
+	eoutdent
 	eend $retval "Some errors were encountered"
 }

init.d/sysctl.Linux.in

@@ -11,8 +11,16 @@ depend()
 
 start()
 {
-	[ -e /etc/sysctl.conf ] || return 0
+	local conf= retval=0
 	ebegin "Configuring kernel parameters"
-	sysctl -p >/dev/null
-	eend $? "Some errors were encountered"
+	eindent
+	for conf in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
+		if [ -r "$conf" ]; then
+			vebegin "applying $conf"
+			sysctl -p "$conf" >/dev/null
+			veend $? || retval=1
+		fi
+	done
+	eoutdent
+	eend $retval "Some errors were encountered"
 }

man/runscript.8

@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd July 1, 2009
+.Dd November 4, 2009
 .Dt RUNSCRIPT 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -143,6 +143,8 @@ When in a jail, exclude this service from any dependencies. The service can
 still be run directly.
 .It Dv -openvz
 Same as -jail, but for OpenVZ systems.
+.It Dv -lxc
+Same as -jail, but for Linux Resource Containers (LXC).
 .It Dv -shutdown
 Don't stop this service when shutting the system down.
 This normally quite safe as remaining daemons will be sent a SIGTERM just

man/start-stop-daemon.8

@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd September 4, 2009
+.Dd December 14, 2009
 .Dt START-STOP-DAEMON 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -136,6 +136,10 @@ option. Only useful when used with daemons that run in the foreground and
 forced into the background with the
 .Fl -b , -background
 option.
+.It Fl I , -ionice Ar class Ns Op : Ns Ar data
+Modifies the IO scheduling priority of the daemon.
+Class can be 0 for none, 1 for real time, 2 for best effort and 3 for idle.
+Data can be from 0 to 7 inclusive.
 .It Fl N , -nice Ar level
 Modifies the scheduling priority of the daemon.
 .It Fl 1 , -stdout Ar logfile
@@ -144,9 +148,9 @@ Redirect the standard output of the process to logfile when started with
 Must be an absolute pathname, but relative to the path optionally given with
 .Fl r , -chroot .
 The logfile can also be a named pipe.
-.It Fl w , -wait Ar seconds
+.It Fl w , -wait Ar milliseconds
 Wait
-.Ar seconds
+.Ar milliseconds
 after starting and check that daemon is still running.
 Useful for daemons that check configuration after forking or stopping race
 conditions where the pidfile is written out after forking.

net/dhcpcd.sh

@@ -56,8 +56,11 @@ dhcpcd_start()
 		esac
 	done
 
-	# Add our route metric
-	[ "${metric:-0}" != "0" ] && args="${args} -m ${metric}"
+	# Add our route metric if not given
+	case " $args " in
+	*" -m "*) ;;
+	*) [ "${metric:-0}" != 0 ] && args="$args -m $metric";;
+	esac
 
 	# Bring up DHCP for this interface
 	ebegin "Running dhcpcd"

net/ifconfig.sh.Linux.in

@@ -42,7 +42,8 @@ _ifindex()
 _is_wireless()
 {
 	# Support new sysfs layout
-	[ -d /sys/class/net/"${IFACE}"/wireless ] && return 0
+	[ -d /sys/class/net/"${IFACE}"/wireless -o \
+		-d /sys/class/net/"${IFACE}"/phy80211 ] && return 0
 
 	[ ! -e /proc/net/wireless ] && return 1
 	grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/wireless

net/iproute2.sh

@@ -43,7 +43,8 @@ _ifindex()
 _is_wireless()
 {
 	# Support new sysfs layout
-	[ -d /sys/class/net/"${IFACE}"/wireless ] && return 0
+	[ -d /sys/class/net/"${IFACE}"/wireless -o \
+		-d /sys/class/net/"${IFACE}"/phy80211 ] && return 0
 
 	[ ! -e /proc/net/wireless ] && return 1
 	grep -Eq "^[[:space:]]*${IFACE}:" /proc/net/wireless

net/pppd.sh

@@ -90,7 +90,7 @@ pppd_pre_start()
 	eval passwordset=\$\{password_${IFVAR}-x\}
 	if [ -n "${username}" ] \
 	&& [ -n "${password}" -o -z "${passwordset}" ]; then
-		opts="${opts} plugin passwordfd.so passwordfd 0"
+		opts="plugin passwordfd.so ${opts} passwordfd 0"
 	fi
 	
 	if ! ${hasdefaultmetric}; then
@@ -155,7 +155,7 @@ pppd_pre_start()
 			opts="${opts} connect true"
 			set -- "$@" "${link}"
 		fi
-		opts="${opts} plugin $1.so"
+		opts="plugin $1.so ${opts}"
 		shift
 		opts="${opts} $@"
 	done

runlevels/Makefile

@@ -1,5 +1,5 @@
 BOOT=		bootmisc fsck hostname localmount network \
-		root swap sysctl urandom
+		root staticroute swap sysctl urandom
 DEFAULT=	local netmount
 SHUTDOWN=	savecache
 

scripts/Makefile

@@ -0,0 +1,5 @@
+DIR=	${LIBEXECDIR}/bin
+BIN=	on_ac_power
+
+MK=	../mk
+include ${MK}/scripts.mk

scripts/on_ac_power

@@ -0,0 +1,33 @@
+#!/bin/sh
+# Detect AC power or not in a portable way
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+
+# Exit 0 if on AC power, 1 if not and 255 if we don't know how to work it out
+if [ -f /proc/acpi/ac_adapter/AC*/state ]; then
+	cat /proc/acpi/ac_adapter/AC*/state | while read line; do
+		case "$line" in
+		"state:"*"off-line") return 128;;
+		esac
+	done
+elif [ -f /proc/pmu/info ]; then
+	cat /proc/pmu/info | while read line; do
+		case "$line" in
+		"AC Power"*": 0") return 128;;
+		esac
+	done
+elif type envstat >/dev/null 2>&1; then
+	# NetBSD has envstat
+	envstat -d acpiacad0 2>/dev/null | while read line; do
+		case "$line" in
+		"connected:"*"OFF") return 128;;
+		esac
+	done
+elif sysctl -q hw.acpi.acline >/dev/null 2>/dev/null; then
+	case $(sysctl -n hw.acpi.acline) in
+	0) return 1;;
+	*) return 0;;
+	esac
+else
+	exit 255
+fi
+[ $? != 128 ]

sh/init.sh.Linux.in

@@ -8,14 +8,19 @@
 # tmpfs and ramfs are easy, so force one or the other.
 mount_svcdir()
 {
+	# mount from fstab if we can
+	fstabinfo --mount "$RC_SVCDIR" && return 0
+
 	local fs= fsopts="-o rw,noexec,nodev,nosuid"
-	local devdir="rc-svcdir" x=
 	local svcsize=${rc_svcsize:-1024}
 
+	# Some buggy kernels report tmpfs even when not present :(
 	if grep -Eq "[[:space:]]+tmpfs$" /proc/filesystems; then
-		fs="tmpfs"
-		fsopts="$fsopts,mode=0755,size=${svcsize}k"
-	elif grep -Eq "[[:space:]]+ramfs$" /proc/filesystems; then
+		mount -n -t tmpfs $fsopts,mode=755,size=${svcsize}k \
+			rc-svcdir "$RC_SVCDIR" && return 0
+	fi
+	
+	if grep -Eq "[[:space:]]+ramfs$" /proc/filesystems; then
 		fs="ramfs"
 		# ramfs has no special options
 	elif [ -e /dev/ram0 ] \
@@ -32,10 +37,7 @@ mount_svcdir()
 		return 1
 	fi
 
-	# If we have no entry in fstab for $RC_SVCDIR, provide our own
-	if ! fstabinfo --mount "$RC_SVCDIR"; then
-		mount -n -t "$fs" $fsopts "$devdir" "$RC_SVCDIR"
-	fi
+	mount -n -t "$fs" $fsopts rc-svcdir "$RC_SVCDIR"
 }
 
 . "$RC_LIBEXECDIR"/sh/functions.sh

src/includes/rc-misc.h

@@ -35,6 +35,7 @@
 #include <sys/stat.h>
 #include <errno.h>
 #include <stdbool.h>
+#include <stdlib.h>
 #include <string.h>
 
 #define RC_LEVEL_BOOT           "boot"

src/librc/librc-depend.c

@@ -346,8 +346,9 @@ get_provided(const RC_DEPINFO *depinfo, const char *runlevel, int options)
 	    get_provided1(runlevel, providers, dt, bootlevel, false, RC_SERVICE_STOPPED))
 		return providers;
 
-	/* Still nothing? OK, list all services */
-	TAILQ_FOREACH(service, dt->services, entries)
+	/* Still nothing? OK, list our first provided service. */
+	service = TAILQ_FIRST(dt->services);
+	if (service != NULL)
 		rc_stringlist_add(providers, service->value);
 
 	return providers;

src/librc/librc.c

@@ -233,6 +233,8 @@ rc_sys(void)
 		return RC_SYS_VSERVER;
 	else if (exists("/proc/vz/veinfo") && !exists("/proc/vz/version"))
 		return RC_SYS_OPENVZ;
+	else if (file_regex("/proc/self/cgroup", ":/.+$"))
+		return RC_SYS_LXC;
 	else if (file_regex("/proc/self/status",
 		"envID:[[:space:]]*[1-9]"))
 		return RC_SYS_OPENVZ; /* old test */

src/librc/rc.h.in

@@ -268,6 +268,7 @@ bool rc_service_daemons_crashed(const char *);
  * Some services cannot work in these systems, or we do something else. */
 #define RC_SYS_JAIL    "JAIL"
 #define RC_SYS_OPENVZ  "OPENVZ"
+#define RC_SYS_LXC     "LXC"
 #define RC_SYS_PREFIX  "PREFIX"
 #define RC_SYS_UML     "UML"
 #define RC_SYS_VSERVER "VSERVER"

src/rc/.gitignore

@@ -38,6 +38,7 @@ service_crashed
 checkpath
 fstabinfo
 mountinfo
+swclock
 rc-depend
 service_get_value
 service_set_value
@@ -59,6 +60,7 @@ checkpath.o
 fstabinfo.o
 mountinfo.o
 start-stop-daemon.o
+swclock.o
 rc-applets.o
 rc-depend.o
 rc-logger.o

src/rc/Makefile

@@ -2,7 +2,7 @@ PROG=		rc
 SRCS=		checkpath.c fstabinfo.c mountinfo.c start-stop-daemon.c \
 		rc-applets.c rc-depend.c rc-logger.c \
 		rc-misc.c rc-plugin.c rc-service.c rc-status.c rc-update.c \
-		runscript.c rc.c
+		runscript.c rc.c swclock.c
 
 CLEANFILES=	version.h
 
@@ -26,7 +26,7 @@ RC_SBINLINKS=	mark_service_starting mark_service_started \
 		mark_service_stopping mark_service_stopped \
 		mark_service_inactive mark_service_wasinactive \
 		mark_service_hotplugged mark_service_failed \
-		rc-abort
+		rc-abort swclock
 ALL_LINKS=	${BINLINKS} ${SBINLINKS} ${RC_BINLINKS} ${RC_SBINLINKS}
 CLEANFILES+=	${ALL_LINKS}
 
@@ -46,12 +46,17 @@ LDADD+=		${LIBDL} ${LIBKVM}
 include ${MK}/${MKPAM}.mk
 
 ${SRCS}: version.h
-version.h:
-	echo "#define VERSION \"${VERSION}${GITVER}\"" >version.h
+
+.PHONY:	version.h.tmp
+version.h.tmp:
+	echo "#define VERSION \"${VERSION}${GITVER}\"" >$@
 	if test -n "${BRANDING}"; then \
-		echo "#define BRANDING \"${BRANDING}\"" >> version.h; \
+		echo "#define BRANDING \"${BRANDING}\"" >> $@; \
 	fi
 
+version.h: version.h.tmp
+	cmp -s $@.tmp $@ && rm $@.tmp || mv $@.tmp $@
+
 install: all
 	${INSTALL} -d ${DESTDIR}${SBINDIR}
 	${INSTALL} -m ${BINMODE} ${PROG} ${DESTDIR}${SBINDIR}

src/rc/builtins.h

@@ -35,6 +35,7 @@ int rc_status(int, char **);
 int rc_update(int, char **);
 int runscript(int, char **);
 int start_stop_daemon(int, char **);
+int swclock(int, char **);
 
 void run_applets(int, char **);
 

src/rc/rc-applets.c

@@ -449,6 +449,8 @@ run_applets(int argc, char **argv)
 		exit(start_stop_daemon(argc, argv));
 	else if (strcmp (applet, "checkpath") == 0)
 		exit(checkpath(argc, argv));
+	else if (strcmp(applet, "swclock") == 0)
+		exit(swclock(argc, argv));
 
 	/* These could also be applications in their own right */
 	if (strcmp(applet, "shell_var") == 0)

src/rc/start-stop-daemon.c

@@ -37,6 +37,7 @@
 #define POLL_INTERVAL   20000000
 #define WAIT_PIDFILE   500000000
 #define ONE_SECOND    1000000000
+#define ONE_MS           1000000
 
 #include <sys/types.h>
 #include <sys/ioctl.h>
@@ -46,6 +47,10 @@
 #include <sys/time.h>
 #include <sys/wait.h>
 
+#ifdef __linux__
+#include <sys/syscall.h> /* For io priority */
+#endif
+
 #include <ctype.h>
 #include <errno.h>
 #include <fcntl.h>
@@ -103,6 +108,13 @@ static char *changeuser, *ch_root, *ch_dir;
 
 extern char **environ;
 
+#ifdef __linux__
+static inline int ioprio_set(int which, int who, int ioprio)
+{
+	return syscall(SYS_ioprio_set, which, who, ioprio);
+}
+#endif
+
 static void
 free_schedulelist(void)
 {
@@ -588,8 +600,9 @@ expand_home(const char *home, const char *path)
 }
 
 #include "_usage.h"
-#define getoptstring "KN:PR:Sbc:d:e:g:ik:mn:op:s:tu:r:w:x:1:2:" getoptstring_COMMON
+#define getoptstring "I:KN:PR:Sbc:d:e:g:ik:mn:op:s:tu:r:w:x:1:2:" getoptstring_COMMON
 static const struct option longopts[] = {
+	{ "ionice",       1, NULL, 'I'},
 	{ "stop",         0, NULL, 'K'},
 	{ "nicelevel",    1, NULL, 'N'},
 	{ "retry",        1, NULL, 'R'},
@@ -618,6 +631,7 @@ static const struct option longopts[] = {
 	longopts_COMMON
 };
 static const char * const longopts_help[] = {
+	"Set an ionice class:data when starting", 
 	"Stop daemon",
 	"Set a nicelevel when starting",
 	"Retry schedule to use when stopping",
@@ -638,7 +652,7 @@ static const char * const longopts_help[] = {
 	"Test actions, don't do them",
 	"Change the process user",
 	"Chroot to this directory",
-	"Seconds to wait for daemon start",
+	"Milliseconds to wait for daemon start",
 	"Binary to start/stop",
 	"Redirect stdout to file",
 	"Redirect stderr to file",
@@ -674,7 +688,7 @@ start_stop_daemon(int argc, char **argv)
 	char *pidfile = NULL;
 	char *retry = NULL;
 	int sig = -1;
-	int nicelevel = 0;
+	int nicelevel = 0, ionicec = -1, ioniced = 0;
 	bool background = false;
 	bool makepidfile = false;
 	bool interpreted = false;
@@ -737,6 +751,17 @@ start_stop_daemon(int argc, char **argv)
 	while ((opt = getopt_long(argc, argv, getoptstring, longopts,
 		    (int *) 0)) != -1)
 		switch (opt) {
+		case 'I': /* --ionice */
+			if (sscanf(optarg, "%d:%d", &ionicec, &ioniced) == 0)
+				eerrorx("%s: invalid ionice `%s'",
+				    applet, optarg);
+			if (ionicec == 0)
+				ioniced = 0;
+			else if (ionicec == 3)
+				ioniced = 7;
+			ionicec <<= 13; /* class shift */
+			break;
+
 		case 'K':  /* --stop */
 			stop = true;
 			break;
@@ -1120,6 +1145,14 @@ start_stop_daemon(int argc, char **argv)
 				    strerror(errno));
 		}
 
+/* Only linux suports setting an IO priority */
+#ifdef __linux__
+		if (ionicec != -1 &&
+		    ioprio_set(1, mypid, ionicec | ioniced) == -1)
+			eerrorx("%s: ioprio_set %d %d: %s", applet,
+			    ionicec, ioniced, strerror(errno));
+#endif
+
 		if (ch_root && chroot(ch_root) < 0)
 			eerrorx("%s: chroot `%s': %s",
 			    applet, ch_root, strerror(errno));
@@ -1311,8 +1344,8 @@ start_stop_daemon(int argc, char **argv)
 		struct timespec ts;
 		bool alive = false;
 		
-		ts.tv_sec = start_wait;
-		ts.tv_nsec = 0;
+		ts.tv_sec = start_wait / 1000;
+		ts.tv_nsec = (start_wait % 1000) * ONE_MS;
 		if (nanosleep(&ts, NULL) == -1) {
 			if (errno == EINTR)
 				eerror("%s: caught an interrupt", applet);

src/rc/swclock.c

@@ -0,0 +1,120 @@
+/*
+  swclock.c
+  Sets the system time from the mtime of the given file.
+  This is useful for systems who do not have a working RTC and rely on ntp.
+  OpenRC relies on the correct system time for a lot of operations so this is needed
+  quite early.
+*/
+
+/*
+ * Copyright (c) 2009 Roy Marples <roy@marples.name>
+ * All rights reserved
+
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/time.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+
+#include <errno.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <unistd.h>
+#include <utime.h>
+
+#include "builtins.h"
+#include "einfo.h"
+#include "rc-misc.h"
+
+#define RC_SHUTDOWNTIME    RC_SVCDIR "/shutdowntime"
+
+extern const char *applet;
+
+#include "_usage.h"
+#define extraopts "file"
+#define getoptstring "sw" getoptstring_COMMON
+static const struct option longopts[] = {
+	{ "save", 0, NULL, 's' },
+	{ "warn", 0, NULL, 'w' },
+	longopts_COMMON
+};
+static const char * const longopts_help[] = {
+	"saves the time",
+	"no error if no reference file",
+	longopts_help_COMMON
+};
+#include "_usage.c"
+
+int
+swclock(int argc, char **argv)
+{
+	int opt, sflag = 0, wflag = 0;
+	const char *file = RC_SHUTDOWNTIME;
+	struct stat sb;
+	struct timeval tv;
+
+	while ((opt = getopt_long(argc, argv, getoptstring,
+		    longopts, (int *) 0)) != -1)
+	{
+		switch (opt) {
+		case 's':
+			sflag = 1;
+			break;
+		case 'w':
+			wflag = 1;
+			break;
+		case_RC_COMMON_GETOPT;
+		}
+	}
+
+	if (optind < argc)
+		file = argv[optind++];
+
+	if (sflag) {
+		if (stat(file, &sb) == -1) {
+			opt = open(file, O_WRONLY | O_CREAT, 0644);
+			if (opt == -1)
+				eerrorx("swclock: open: %s", strerror(errno));
+			close(opt);
+		} else
+			if (utime(file, NULL) == -1)
+				eerrorx("swclock: utime: %s", strerror(errno));
+		return 0;
+	}
+
+	if (stat(file, &sb) == -1) {
+		if (wflag != 0 && errno == ENOENT)
+			ewarn("swclock: `%s': %s", file, strerror(errno));
+		else
+			eerrorx("swclock: `%s': %s", file, strerror(errno));
+		return 0;
+	}
+
+	tv.tv_sec = sb.st_mtime;
+	tv.tv_usec = 0;
+
+	if (settimeofday(&tv, NULL) == -1)
+		eerrorx("swclock: settimeofday: %s", strerror(errno));
+
+	return 0;
+}