release openrc-0.6.6

This fixes bug #347307.

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.6.0
+VERSION=	0.6.6
 PKG=		${NAME}-${VERSION}

README

@@ -41,7 +41,7 @@ If any of the following files exist then we do not overwrite them
 rc and rc.shutdown are the hooks from the BSD init into OpenRC.
 devd.conf is modified from FreeBSD to call /etc/rc.devd which is a generic
 hook into OpenRC.
-inittab is the same, but for SysVInit as used by most Linux distrubtions.
+inittab is the same, but for SysVInit as used by most Linux distributions.
 This can be found in the support folder.
 Obviously, if you're installing this onto a system that does not use OpenRC
 by default then you may wish to backup the above listed files, remove them
@@ -66,7 +66,7 @@ History - by Roy Marples
 ------------------------
 I became a Gentoo/Linux developer in 2004 and wrote the modular network
 scripts for the Gentoo baselayout package. baselayout is a collection of
-bash scripts to bring up your computer and it's services.
+bash scripts to bring up your computer and its services.
 Then towards the end of 2005 I found myself as the primary maintainer
 for baselayout.
 

README.net

@@ -12,8 +12,8 @@ In the Perfect World (TM) ifconfig should be able to configure everything
 about the interface easily * . The BSD family almost get this right and Linux
 epically fails.
 
-* Only static confguration, including link setup.
-For dynmaic, static, IPv4LL, arping and per ssid IPv4 setup dhcpcd-5.x
+* Only static configuration, including link setup.
+For dynamic, static, IPv4LL, arping and per ssid IPv4 setup dhcpcd-5.x
 provides your needs.
 
 It fails because there are many tools to do the same job and often have
@@ -31,6 +31,6 @@ currently available. It's just harder as you have to know them and their
 documentation can be lacking at times.
 The correct end goal is a BSD style ifconfig tool.
 I've started work on it, but the project has stalled somewhat.
-It's display only right now and the source is not yet publically available.
+It's display only right now and the source is not yet publicly available.
 If you have the skills and share the vision then contact me privately and
 we'll take it from there.

conf.d/Makefile

@@ -11,7 +11,7 @@ include ${MK}/scripts.mk
 
 SOS?=	BSD
 
-network: network.in network.${OS}
+network: network.in network.${SOS}
 	cp $@.in $@
 	[ -e $@.${SOS} ] && cat $@.${SOS} >> $@ || true
 

doc/net.example.BSD.in

@@ -12,7 +12,7 @@
 # kernel then remove the IPv6 address from your config.
 
 # If you want to use a static address or use DHCP explicitly, jump
-# down to the section labelled INTERFACE HANDLERS.
+# down to the section labeled INTERFACE HANDLERS.
 #
 # If you want to do anything more fancy, you should take the time to
 # read through the rest of this file.
@@ -22,10 +22,10 @@
 #
 # We now support modular networking scripts which means we can easily
 # add support for new interface types and modules while keeping
-# compatability with existing ones.
+# compatibility with existing ones.
 # 
 # Modules load by default if the package they need is installed.  If
-# you specify a module here that doesn't have it's package installed
+# you specify a module here that doesn't have its package installed
 # then you get an error stating which package you need to install.
 # Ideally, you only use the modules setting when you have two or more
 # packages installed that supply the same service.
@@ -96,8 +96,8 @@
 #modules="iwconfig"
 
 # ifconfig (iwconig) support is a one shot script - wpa_supplicant is daemon
-# that scans, assoicates and re-configures if assocation is lost.
-# We call it iwconfig to seperate the wireless setup from ifconfig.
+# that scans, associates and re-configures if association is lost.
+# We call it iwconfig to separate the wireless setup from ifconfig.
 ####################################
 # HINTS
 #
@@ -182,7 +182,7 @@
 #dns_servers_001122334455="192.168.0.1 192.168.0.2"
 
 # Map a MAC address to an SSID
-# This is used when the Access Point is not broadcasting it's SSID
+# This is used when the Access Point is not broadcasting its SSID
 # WARNING: This will override the SSID being broadcast due to some
 # Access Points sending an SSID even when they have been configured
 # not to!
@@ -193,7 +193,7 @@
 # This lists the preferred SSIDs to connect to in order
 # SSID's can contain any characters here as they must match the broadcast
 # SSID exactly.
-# Surround each SSID with the " character and seperate them with a space
+# Surround each SSID with the " character and separate them with a space
 # If the first SSID isn't found then it moves onto the next
 # If this isn't defined then it connects to the first one found
 #preferred_aps="SSID1 SSID2"
@@ -208,9 +208,9 @@
 # any other available AP
 # "preferredonly" means it will only connect to visible APs in the preferred
 # list
-# "forcepreferred" means it will forceably connect to APs in order if it does
+# "forcepreferred" means it will forcibly connect to APs in order if it does
 # not find them in a scan
-# "forcepreferredonly" means it forceably connects to the APs in order and
+# "forcepreferredonly" means it forcibly connects to the APs in order and
 # does not bother to scan
 # "forceany" does the same as forcepreferred + connects to any other 
 # available AP
@@ -320,7 +320,7 @@
 # Set generic DHCP options like so
 #dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
 
-# This tells the dhcp client to release it's lease when it stops, not to
+# This tells the dhcp client to release its lease when it stops, not to
 # overwrite dns, ntp and nis settings, not to set a default route and not to
 # send the current hostname to the dhcp server and when it starts.
 # You can use any combination of the above options - the default is not to

doc/net.example.Linux.in

@@ -12,7 +12,7 @@
 # kernel then remove the IPv6 address from your config.
 
 # If you want to use a static address or use DHCP explicitly, jump
-# down to the section labelled INTERFACE HANDLERS.
+# down to the section labeled INTERFACE HANDLERS.
 #
 # If you want to do anything more fancy, you should take the time to
 # read through the rest of this file.
@@ -23,10 +23,10 @@
 #
 # We now support modular networking scripts which means we can easily
 # add support for new interface types and modules while keeping
-# compatability with existing ones.
+# compatibility with existing ones.
 # 
 # Modules load by default if the package they need is installed.  If
-# you specify a module here that doesn't have it's package installed
+# you specify a module here that doesn't have its package installed
 # then you get an error stating which package you need to install.
 # Ideally, you only use the modules setting when you have two or more
 # packages installed that supply the same service.
@@ -106,7 +106,7 @@
 
 # Each module described below can set a default base metric, lower is
 # preferred over higher. This is so we can prefer a wired route over a
-# wireless route automaticaly. You can override this by setting
+# wireless route automatically. You can override this by setting
 #metric_eth0="100"
 # or on a global basis
 #metric="100"
@@ -253,7 +253,7 @@
 #key_SSID="s:foobar enc open"
 #key_SSID="1234-5678-9012 enc open"
 
-# You may want to set muliple keys - here's an example
+# You may want to set multiple keys - here's an example
 # It sets 4 keys on the card and instructs to use key 2 by default
 #key_SSID="[1] s:passkey1 key [2] s:passkey2 key [3] s:passkey3 key [4] s:passkey4 key [2]"
 
@@ -283,7 +283,7 @@
 #dns_servers_001122334455="192.168.0.1 192.168.0.2"
 
 # Map a MAC address to an SSID
-# This is used when the Access Point is not broadcasting it's SSID
+# This is used when the Access Point is not broadcasting its SSID
 # WARNING: This will override the SSID being broadcast due to some
 # Access Points sending an SSID even when they have been configured
 # not to!
@@ -294,7 +294,7 @@
 # This lists the preferred SSIDs to connect to in order
 # SSID's can contain any characters here as they must match the broadcast
 # SSID exactly.
-# Surround each SSID with the " character and seperate them with a space
+# Surround each SSID with the " character and separate them with a space
 # If the first SSID isn't found then it moves onto the next
 # If this isn't defined then it connects to the first one found
 #preferred_aps="SSID1 SSID2" 
@@ -307,9 +307,9 @@
 # "any" means it will connect to visible APs in the preferred list and then any
 # other available AP
 # "preferredonly" means it will only connect to visible APs in the preferred list
-# "forcepreferred" means it will forceably connect to APs in order if it does not find
+# "forcepreferred" means it will forcibly connect to APs in order if it does not find
 # them in a scan
-# "forcepreferredonly" means it forceably connects to the APs in order and does not bother
+# "forcepreferredonly" means it forcibly connects to the APs in order and does not bother
 # to scan
 # "forceany" does the same as forcepreferred + connects to any other available AP
 # Default is "any"
@@ -448,7 +448,7 @@
 # Set generic DHCP options like so
 #dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
 
-# This tells the dhcp client to release it's lease when it stops, not to
+# This tells the dhcp client to release its lease when it stops, not to
 # overwrite dns, ntp and nis settings, not to set a default route and not to
 # send the current hostname to the dhcp server and when it starts.
 # You can use any combination of the above options - the default is not to
@@ -572,7 +572,7 @@
 #config_bond0="null" # You may not want to assign an IP the the bond
 
 # You can also configure the bond here, which must be done via sysfs on 2.6
-# kernels or newer. See the kernel bonding documention for a description of
+# kernels or newer. See the kernel bonding documentation for a description of
 # these options.
 #arp_ip_target_bond0="+26.0.0.0"
 
@@ -658,7 +658,7 @@
 #
 # Dead peer detection
 #	lcp-echo-interval 15	# Send a LCP echo every 15 seconds
-#	lcp-echo-failure 3	# Make peer dead after 3 consective
+#	lcp-echo-failure 3	# Make peer dead after 3 consecutive
 #				# echo-requests
 #	
 # Compression options - use these to completely disable compression
@@ -822,8 +822,8 @@
 #config_nas0="'192.168.0.1/24'"
 
 #-----------------------------------------------------------------------------
-# Tunnelling
-# WARNING: For tunnelling it is highly recommended that you
+# Tunneling
+# WARNING: For tunneling it is highly recommended that you
 # emerge sys-apps/iproute2
 #
 # For GRE tunnels
@@ -838,7 +838,7 @@
 
 # 6to4 Tunnels allow IPv6 to work over IPv4 addresses, provided you
 # have a non-private address configured on an interface.
-# link_6to4="eth0"		# Interface to base it's addresses on
+# link_6to4="eth0"		# Interface to base its addresses on
 # config_6to4="ip6to4"
 # You may want to depend on eth0 like so
 #rc_need_6to4="net.eth0"
@@ -848,7 +848,7 @@
 # sit0 - otherwise use a different name like 6to4 in the example above.
 
 # You can also specify a relay and suffix if you like.
-# The default relay is 192.88.99.1 and the defualt suffix is :1
+# The default relay is 192.88.99.1 and the default suffix is :1
 #relay_6to4="192.168.3.2"
 #suffix_6to4=":ff"
 
@@ -896,7 +896,7 @@
 # and you're done :)
 
 # By default we don't wait for netplug/ifplugd to configure the interface.
-# If you would like it to wait so that other services now that network is up
+# If you would like it to wait so that other services know that network is up
 # then you can specify a timeout here.
 #plug_timeout="10"
 # A value of 0 means wait forever.
@@ -936,8 +936,8 @@
 
 #preup() {
 #	# Test for link on the interface prior to bringing it up.  This
-#	# only works on some network adapters and requires the mii-diag
-#	# package to be installed.
+#	# only works on some network adapters and requires the
+#	# sys-apps/net-tools package to be installed.
 #	if mii-tool "${IFACE}" 2> /dev/null | grep -q 'no link'; then
 #		ewarn "No link on ${IFACE}, aborting configuration"
 #		return 1

etc/rc.conf.in

@@ -2,7 +2,7 @@
 
 # Set to "YES" if you want the rc system to try and start services
 # in parallel for a slight speed improvement. When running in parallel we
-# prefix the service output with it's name as the output will get
+# prefix the service output with its name as the output will get
 # jumbled up.
 # WARNING: whilst we have improved parallel, it can still potentially lock
 # the boot process. Don't file bugs about this unless you can supply
@@ -11,7 +11,8 @@
 
 # Set rc_interactive to "YES" and you'll be able to press the I key during
 # boot so you can choose to start specific services. Set to "NO" to disable
-# this feature.
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
 #rc_interactive="YES"
 
 # If we need to drop to a shell, you can specify it here.
@@ -75,8 +76,14 @@
 # Set unicode to YES to turn on unicode support for keyboards and screens.
 #unicode="NO"
 
-# Network fstypes. Below is the default.
-net_fs_list="afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs nfs nfs4 ocfs2 shfs smbfs"
+# Below is the default list of network fstypes.
+#
+# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
 
 ##############################################################################
 # SERVICE CONFIGURATION VARIABLES

init.d/bootmisc.in

@@ -4,7 +4,6 @@
 
 depend()
 {
-	use hostname
 	need localmount
 	before logger
 	after clock sysctl
@@ -36,6 +35,12 @@ cleanup_tmp_dir()
 		# Faster than find
 		rm -rf -- [^ajlq\.]*
 
+		# pam_mktemp creates a .private directory within which
+		# each user gets a private directory with immutable
+		# bit set; remove the immutable bit before trying to
+		# remove it.
+		[ -d /tmp/.private ] && chattr -R -a /tmp/.private 2> /dev/null
+
 		find $startopts ! -name . \
 			! -path "./lost+found" \
 			! -path "./lost+found/*" \
@@ -49,8 +54,6 @@ cleanup_tmp_dir()
 			! -path "./aquota.group/*" \
 			! -path "./journal" \
 			! -path "./journal/*" \
-			! -path "./.private" \
-			! -path "./.private/*" \
 			-exec rm -rf {} \;
 		eend 0
 	else

init.d/consolefont.in

@@ -8,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after hotplug bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 start()

init.d/keymaps.in

@@ -8,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 start()

init.d/local.in

@@ -18,11 +18,6 @@ start()
 		local_start
 	fi
 
-	# Support old configs
-	if [ -e @SYSCONFDIR@/conf.d/local.start ]; then
-		. @SYSCONFDIR@/conf.d/local.start
-	fi
-
 	eend $? "Failed to start local"
 }
 
@@ -34,10 +29,5 @@ stop()
 		local_stop
 	fi
 
-	# Support old configs
-	if [ -e @SYSCONFDIR@/conf.d/local.stop ]; then
-		. @SYSCONFDIR@/conf.d/local.stop
-	fi
-
 	eend $? "Failed to stop local"
 }

init.d/localmount.in

@@ -14,13 +14,16 @@ depend()
 start()
 {
 	# Mount local filesystems in /etc/fstab.
-	local types="noproc" x=
+	local types="noproc" x= no_netdev=
 	for x in $net_fs_list; do
 		types="${types},${x}"
 	done
 
+	if [ "$RC_UNAME" = Linux ]; then
+		no_netdev="-O no_netdev"
+	fi
 	ebegin "Mounting local filesystems"
-	mount -at "$types"
+	mount -at "$types" $no_netdev
 	eend $? "Some local filesystem failed to mount"
 
 	# Always return 0 - some local mounts may not be critical for boot

init.d/network.in

@@ -57,6 +57,32 @@ sys_interfaces()
 	esac
 }
 
+tentative()
+{
+	local inet= address= rest=
+
+	case "$RC_UNAME" in
+	Linux)
+		[ -x /sbin/ip ] || [ -x /bin/ip ] || return 1
+		[ -n "$(ip -f inet6 addr show tentative)" ]
+		;;
+	*)
+		local inet= address= rest=
+		LC_ALL=C ifconfig -a | while read inet address rest; do
+	 		case "${inet}" in
+			inet6)
+				case "${rest}" in
+				*" "tentative*) return 2;;
+				esac
+				;;
+			esac
+		done
+		[ $? = 2 ]
+		;;
+	esac
+}
+
+
 auto_interfaces()
 {
 	local ifs= c= f=
@@ -135,7 +161,7 @@ runip()
 routeflush()
 {
 	if [ "$RC_UNAME" = Linux ]; then
-		if [ -x /sbin/ip ]; then
+		if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
 			ip route flush scope global
 			ip route delete default 2>/dev/null
 		else
@@ -197,8 +223,6 @@ start()
 	routeflush
 	if [ "$RC_UNAME" = "Linux" ]; then
 		ifconfig lo 127.0.0.1 netmask 255.0.0.0 || cr=1 
-		route add -net 127.0.0.0 netmask 255.0.0.0 \
-			gw 127.0.0.1 2>/dev/null
 		route add -net 127.0.0.0 netmask 255.0.0.0 \
 			gw 127.0.0.1 reject 2>/dev/null
 	else
@@ -251,6 +275,19 @@ start()
 	eoutdent
 	eend $cr
 
+	# Wait for any inet6 tentative addresses
+	r=5
+	while [ $r -gt 0 ]; do
+		tentative || break
+		[ $r = 5 ] && vebegin "Waiting for tentative addresses"
+		sleep 1
+		r=$(($r - 1))
+	done
+	if [ $r != 5 ]; then
+		[ $r != 0 ]
+		veend $?
+	fi
+	
 	if [ -n "$defaultroute" ]; then
 		ebegin "Setting default route $defaultroute"
 		route add default $defaultroute
@@ -301,7 +338,7 @@ stop()
 		then
 			veinfo "$int"
 			runargs /etc/ifdown."$int" "$downcmd"
-			if [ -x /sbin/ip ]; then
+			if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
 				# We need to do this, otherwise we may
 				# fail to add things correctly on restart
 				ip address flush dev "$int" 2>/dev/null

init.d/procfs.in

@@ -13,7 +13,7 @@ depend()
 
 start()
 {
-	# Make sure we insert usbcore if its a module
+	# Make sure we insert usbcore if it's a module
 	if [ -f /proc/modules -a ! -d /proc/bus/usb ]; then
 		modprobe -q usbcore
 	fi

init.d/sysctl.BSD.in

@@ -4,7 +4,6 @@
 
 depend()
 {
-	use hostname
 	before bootmisc logger
 	keyword -prefix
 }

init.d/sysctl.Linux.in

@@ -4,7 +4,6 @@
 
 depend()
 {
-	use hostname
 	before bootmisc logger
 	keyword -openvz -prefix -vserver
 }

man/einfo.3

@@ -39,7 +39,7 @@
 .Nm eprefix
 .Nd colorful informational output
 .Sh LIBRARY
-Enhanced Informatation output library (libeinfo, -leinfo)
+Enhanced Information output library (libeinfo, -leinfo)
 .Sh SYNOPSIS
 .In einfo.h
 .Ft int Fn einfo "const char * restrict format" ...

man/rc-status.8

@@ -36,7 +36,7 @@
 .Nm
 gathers and displays information about the status of services 
 in different runlevels.  The default behavior is to show information 
-about the current runlevel and any unassgined services that are not stopped,
+about the current runlevel and any unassigned services that are not stopped,
 but any runlevel can be quickly examined.
 .Pp
 The options are as follows:

man/rc_find_pids.3

@@ -54,7 +54,7 @@ owned by
 .Fa uid ,
 all of which are optional.
 .Pp
-The retuned list should be freed when done.
+The returned list should be freed when done.
 .Sh IMPLEMENTATION NOTES
 On BSD systems we use
 .Lb libkvm

man/rc_plugin_hook.3

@@ -42,7 +42,7 @@ is set to the hook running, and
 .Fa name
 is set to the name of the runlevel or name of the service.
 .Pp
-Plugins can affect the parent environemnt by writing NULL separated strings to
+Plugins can affect the parent environment by writing NULL separated strings to
 .Va rc_environ_fd .
 .Sh SEE ALSO
 .Xr rc 8 ,

man/runscript.8

@@ -39,8 +39,8 @@
 .Nm
 is basically an interpreter for shell scripts which provide an easy interface
 to the often complex system commands and daemons.
-When a service runs a command it first loads it's mulitplexed configuration
-file, then it's master configuration file, then
+When a service runs a command it first loads its multiplexed configuration
+file, then its master configuration file, then
 .Pa /etc/rc.conf
 and finally the script itself. At this point
 .Nm
@@ -79,7 +79,7 @@ Ignore all dependency information the service supplies.
 Only run the command if the service has been started.
 .It Fl q , -quiet
 Turns off all informational output the service generates.
-Output from any non OpenRC comands is not affected.
+Output from any non OpenRC commands is not affected.
 .It Fl v , -verbose
 Turns on any extra informational output the service generates.
 .It Fl Z , -dry-run
@@ -90,9 +90,9 @@ or stopping them.
 The following variables affect the service script:
 .Bl -tag -width "RC_DEFAULTLEVEL"
 .It Ar extra_commands
-Space seperated list of extra commands the service defines.
+Space separated list of extra commands the service defines.
 .It Ar extra_started_commands
-Space seperated list of extra commands the service defines. These only work if
+Space separated list of extra commands the service defines. These only work if
 the service has already been started.
 .It Ar description
 String describing the service.
@@ -128,7 +128,7 @@ will refuse to stop until any services that need it have stopped.
 The service will attempt to start any services we use that have been added
 to the runlevel.
 .It Ic after
-The service will start after thse services and stop before these services.
+The service will start after these services and stop before these services.
 .It Ic before
 The service will start before these services and stop after these services.
 .It Ic provide
@@ -225,7 +225,7 @@ is newer than
 return 0, otherwise 1.
 If
 .Ar file2
-is a directory, then check all it's contents too.
+is a directory, then check all its contents too.
 .It Ic is_older_than Ar file1 Ar file2 ...
 If
 .Ar file1
@@ -234,7 +234,7 @@ is newer than
 return 0, otherwise 1.
 If
 .Ar file2
-is a directory, then check all it's contents too.
+is a directory, then check all its contents too.
 .It Ic service_set_value Ar name Ar value
 Saves the
 .Ar name
@@ -320,7 +320,7 @@ Configuration files, relative to the location of the service.
 If a file ending with .${RC_RUNLEVEL} exists then we use that instead.
 .Bl -ohang
 .It Pa ../conf.d/${RC_SVCNAME%%.*}
-mulitplexed configuration file.
+multiplexed configuration file.
 Example: if ${RC_SVCNAME} is net.eth1 then look for
 .Pa ../conf.d/net .
 .It Pa ../conf.d/${RC_SVCNAME}

man/start-stop-daemon.8

@@ -43,7 +43,7 @@
 .Ar daemon
 .Sh DESCRIPTION
 .Nm
-provides a consistent method of starting, stopping and signalling daemons.
+provides a consistent method of starting, stopping and signaling daemons.
 If neither
 .Fl K , -stop
 nor
@@ -85,7 +85,7 @@ then
 .Nm
 matches the process
 .D1 /usr/bin/perl -w foo
-If an interpreted daemon changes it's process name then this won't work.
+If an interpreted daemon changes its process name then this won't work.
 .It Fl u , -user Ar user Ns Op : Ns Ar group
 Start the daemon as the
 .Ar user

net/bonding.sh

@@ -15,7 +15,14 @@ _is_bond()
 
 bonding_pre_start()
 {
-	local x= s= slaves="$(_get_array "slaves_${IFVAR}")" 
+	local x= s= n= slaves= primary=
+
+	slaves="$(_get_array "slaves_${IFVAR}")"
+	unset slaves_${IFVAR}
+
+	eval primary="\$primary_${IFVAR}"
+	unset primary_${IFVAR}
+
 
 	[ -z "${slaves}" ] && return 0
 
@@ -39,13 +46,31 @@ bonding_pre_start()
 		return 1
 	fi
 
-	# Configure the bond.
-	# Nice and dynamic :)
+	# Interface must be down in order to configure
+	_down
+
+	# Configure the bond mode, then we can reloop to ensure we configure
+	# All other options
+	for x in /sys/class/net/"${IFACE}"/bonding/mode; do
+		[ -f "${x}" ] || continue
+		n=${x##*/}
+		eval s=\$${n}_${IFVAR}
+		if [ -n "${s}" ]; then
+			einfo "Setting ${n}: ${s}"
+			echo "${s}" >"${x}" || \
+			eerror "Failed to configure $n (${n}_${IFVAR})"
+		fi
+	done
+	# Nice and dynamic for remaining options:)
 	for x in /sys/class/net/"${IFACE}"/bonding/*; do
 		[ -f "${x}" ] || continue
-		eval s=\$${x##*/}_${IFVAR}
+		n=${x##*/}
+		eval s=\$${n}_${IFVAR}
+		[ "${n}" != "mode" ] || continue
 		if [ -n "${s}" ]; then
-			echo "${s}" >"${x}"
+			einfo "Setting ${n}: ${s}"
+			echo "${s}" >"${x}" || \
+			eerror "Failed to configure $n (${n}_${IFVAR})"
 		fi
 	done
 
@@ -72,6 +97,11 @@ bonding_pre_start()
 	# finally add in slaves
 	eoutdent
 	if [ -d /sys/class/net ]; then
+		if [ -n "${primary}" ]; then
+			echo "+${primary}" >/sys/class/net/"${IFACE}"/bonding/slaves
+			echo "${primary}" >/sys/class/net/"${IFACE}"/bonding/primary
+			slaves="${slaves/${primary}/}"
+		fi
 		for s in ${slaves}; do
 			echo "+${s}" >/sys/class/net/"${IFACE}"/bonding/slaves
 		done
@@ -117,6 +147,12 @@ bonding_stop()
 	done
 	)
 
+	_down
+
+	if [ -d /sys/class/net ]; then
+		echo "-${IFACE}" > /sys/class/net/bonding_masters
+	fi
+
 	eend 0
 	return 0
 }

net/bridge.sh

@@ -11,7 +11,8 @@ _config_vars="$_config_vars bridge bridge_add brctl"
 
 _is_bridge()
 {
-	brctl show 2>/dev/null | grep -q "^${IFACE}[[:space:]]"
+	# Ignore header line so as to allow for bridges named 'bridge'
+	brctl show 2>/dev/null | sed '1,1d' | grep -q "^${IFACE}[[:space:]]"
 }
 
 bridge_pre_start()
@@ -88,14 +89,16 @@ bridge_post_stop()
 	if _is_bridge; then
 		ebegin "Destroying bridge ${IFACE}"
 		_down
+		# Ignore header line so as to allow for bridges named 'bridge'
 		ports="$(brctl show 2>/dev/null | \
-			sed -n -e '/^'"${IFACE}"'[[:space:]]/,/^\S/ { /^\('"${IFACE}"'[[:space:]]\|\t\)/s/^.*\t//p }')"
+			sed -n -e '1,1d' -e '/^'"${IFACE}"'[[:space:]]/,/^\S/ { /^\('"${IFACE}"'[[:space:]]\|\t\)/s/^.*\t//p }')"
 		delete=true
 		iface=${IFACE}
 		eindent
 	else
 		# Work out if we're added to a bridge for removal or not
-		eval set -- $(brctl show 2>/dev/null | sed -e "s/'/'\\\\''/g" -e "s/$/'/g" -e "s/^/'/g")
+		# Ignore header line so as to allow for bridges named 'bridge'
+		eval set -- $(brctl show 2>/dev/null | sed -e '1,1d' -e "s/'/'\\\\''/g" -e "s/$/'/g" -e "s/^/'/g")
 		local line=
 		for line; do
 			set -- ${line}

net/dhclient.sh

@@ -17,6 +17,7 @@ dhclient_start()
 
 	# Get our options
 	# These options only work in Gentoo, and maybe RedHat
+	eval args=\$dhclient_${IFVAR}
 	eval opts=\$dhcp_${IFVAR}
 	[ -z "${opts}" ] && opts=${dhcp}
 

net/iproute2.sh

@@ -1,9 +1,18 @@
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
+_ip()
+{
+	if [ -x /bin/ip ]; then
+		echo /bin/ip
+	else
+		echo /sbin/ip
+	fi
+}
+
 iproute2_depend()
 {
-	program /sbin/ip
+	program $(_ip)
 	provide interface
 	after ifconfig
 }
@@ -160,7 +169,8 @@ _add_route()
 
 	# We cannot use a metric if we're using a nexthop
 	if ! ${have_metric} && \
-		[ -n "${metric}" -a -z "${cmd##* nexthop }" ]
+		[ -n "${metric}" -a \
+			"${cmd##* nexthop }" = "$cmd" ]
 	then
 		cmd="${cmd} metric ${metric}"
 	fi

net/tuntap.sh

@@ -26,7 +26,7 @@ tuntap_pre_start()
 			return 1
 		fi
 		vebegin "Waiting for /dev/net/tun"
-		# /dev/net/tun can take it's time to appear
+		# /dev/net/tun can take its time to appear
 		local timeout=10
 		while [ ! -e /dev/net/tun -a ${timeout} -gt 0 ]; do
 			sleep 1

net/vlan.sh

@@ -20,7 +20,7 @@ _is_vlan()
 _get_vlans()
 {
 	[ -e /proc/net/vlan/config ] || return 1
-	sed -n -e 's/^\(.*[0-9]\) \(.* \) .*'"${IFACE}"'$/\1/p' /proc/net/vlan/config
+	sed -n -e 's/^\W*\([^ ]*\) \(.* \) .*'"${IFACE}"'$/\1/p' /proc/net/vlan/config
 }
 
 _check_vlan()
@@ -87,7 +87,7 @@ vlan_post_start()
 
 		# We need to work out the interface name of our new vlan id
 		local ifname="$(sed -n -e \
-			's/^\([^[:space:]]*\) *| '"${vlan}"' *| .*'"${iface}"'$/\1/p' \
+			's/^\([^[:space:]]*\) *| '"${vlan}"' *| .*'"${IFACE}"'$/\1/p' \
 			/proc/net/vlan/config )"
 		mark_service_started "net.${ifname}"
 		(

pkgconfig/Makefile

@@ -2,7 +2,8 @@ DIR=	${LIBDIR}/pkgconfig
 SRCS=	einfo.pc.in openrc.pc.in
 INC=	einfo.pc openrc.pc
 
-sed -n -e 's/^VERSION=[[:space:]]*\([^[:space:]]*\).*/#define VERSION "\1${GITVER}\"/p' ../../Makefile > version.h
+.DEFAULT:
+	${SED} -n -e 's/^VERSION=[[:space:]]*\([^[:space:]]*\).*/#define VERSION "\1${GITVER}\"/p' ../../Makefile > version.h
 
 SED_EXTRA=	-e 's:@VERSION@:${VERSION}:g'
 

scripts/on_ac_power

@@ -6,26 +6,30 @@
 if [ -f /proc/acpi/ac_adapter/AC*/state ]; then
 	cat /proc/acpi/ac_adapter/AC*/state | while read line; do
 		case "$line" in
-		"state:"*"off-line") return 128;;
+		"state:"*"off-line") exit 128;;
 		esac
 	done
+elif [ -f /sys/class/power_supply/AC*/online ]; then
+	cat /sys/class/power_supply/AC*/online | while read line; do
+		[ "${line}" = 0 ] && exit 128
+	done
 elif [ -f /proc/pmu/info ]; then
 	cat /proc/pmu/info | while read line; do
 		case "$line" in
-		"AC Power"*": 0") return 128;;
+		"AC Power"*": 0") exit 128;;
 		esac
 	done
 elif type envstat >/dev/null 2>&1; then
 	# NetBSD has envstat
 	envstat -d acpiacad0 2>/dev/null | while read line; do
 		case "$line" in
-		"connected:"*"OFF") return 128;;
+		"connected:"*"OFF") exit 128;;
 		esac
 	done
 elif sysctl -q hw.acpi.acline >/dev/null 2>/dev/null; then
 	case $(sysctl -n hw.acpi.acline) in
-	0) return 1;;
-	*) return 0;;
+	0) exit 1;;
+	*) exit 0;;
 	esac
 else
 	exit 255

sh/gendepends.sh.in

@@ -5,6 +5,7 @@
 # All rights reserved. Released under the 2-clause BSD license.
 
 . @SYSCONFDIR@/init.d/functions.sh
+. @LIBEXECDIR@/sh/rc-functions.sh
 
 config() {
 	[ -n "$*" ] && echo "$RC_SVCNAME config $*" >&3
@@ -82,24 +83,7 @@ do
 
 		if . "$_dir/$RC_SVCNAME"; then
 			echo "$RC_SVCNAME" >&3
-			depend
-			_rc_svcname=$(shell_var "$RC_SVCNAME")
-
-			# Add any user defined depends
-			for _deptype in config:CONFIG need:NEED use:USE \
-			after:AFTER before:BEFORE \
-			provide:PROVIDE keyword:KEYWORD; do
-				IFS=:
-				set -- $_deptype
-				unset IFS
-				eval _depends=\$rc_$_rc_svcname_$1
-				[ -z "$_depends" ] && eval _depends=\$rc_$1
-				[ -z "$_depends" ] && \
-					eval _depends=\$RC_$_rc_svcname_$2
-				[ -z "$_depends" ] && eval _depends=\$RC_$2
-
-				$1 ${_depends}
-			done
+			_depend
 		fi
 		)
 	done

sh/init-early.sh.Linux.in

@@ -17,7 +17,7 @@ fi
 if [ -e /etc/runlevels/"$RC_DEFAULTLEVEL"/consolefont \
 	 -o -e /etc/runlevels/"$RC_BOOTLEVEL"/consolefont ]; then
 	printf "\033%s" "$termencoding" >"$CONSOLE" 2>/dev/null
-	if [ -r "$RC_LIBEXECDIR"/console/font -a -x /bin/setfont ]; then
+	if [ -r "$RC_LIBEXECDIR"/console/font -a -x /usr/bin/setfont ]; then
 		font="$(cat "$RC_LIBEXECDIR"/console/font)"
 		[ -c "$CONSOLE" ] && cons="-C $CONSOLE"
 		setfont $cons "$RC_LIBEXECDIR"/console/"$font" 2>/dev/null
@@ -29,7 +29,7 @@ if [ -e /etc/runlevels/"$RC_DEFAULTLEVEL"/keymaps \
 	 -o -e /etc/runlevels/"$RC_BOOTLEVEL"/keymaps ]; then
 	kbd_mode $kmode -C "$CONSOLE" 2>/dev/null
 	if [ -r "$RC_LIBEXECDIR"/console/keymap ]; then
-		loadkeys "$RC_LIBEXECDIR"/console/keymap 2>/dev/null
+		loadkeys -q "$RC_LIBEXECDIR"/console/keymap 2>/dev/null
 	fi
 fi
 

sh/init.sh.Linux.in

@@ -70,4 +70,14 @@ if $mountproc; then
 	eend $?
 fi
 
+# Try to mount xenfs as early as possible, otherwise rc_sys() will always
+# return RC_SYS_XENU and will think that we are in a domU while it's not.
+if grep -Eq "[[:space:]]+xenfs$" /proc/filesystems; then
+	ebegin "Mounting xenfs"
+	if ! fstabinfo --mount /proc/xen; then
+		mount -n -t xenfs xenfs /proc/xen -o nosuid,nodev,noexec
+	fi
+	eend $?
+fi
+
 . "$RC_LIBEXECDIR"/sh/init-common-post.sh

sh/rc-functions.sh.in

@@ -38,7 +38,8 @@ stop_addon()
 	( import_addon "$1-stop" )
 }
 
-net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
+net_fs_list="afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre
+ncpfs nfs nfs4 ocfs2 shfs smbfs $extra_net_fs_list"
 is_net_fs()
 {
 	[ -z "$1" ] && return 1
@@ -84,6 +85,27 @@ get_bootparam()
 	return 1
 }
 
+# Called from runscript.sh or gendepends.sh
+_depend() {
+	depend
+	local _rc_svcname=$(shell_var "$RC_SVCNAME") _deptype= _depends=
+
+	# Add any user defined depends
+	for _deptype in config:CONFIG need:NEED use:USE \
+	after:AFTER before:BEFORE \
+	provide:PROVIDE keyword:KEYWORD; do
+		IFS=:
+		set -- $_deptype
+		unset IFS
+		eval _depends=\$rc_${_rc_svcname}_$1
+		[ -z "$_depends" ] && eval _depends=\$rc_$1
+		[ -z "$_depends" ] && eval _depends=\$RC_${_rc_svcname}_$2
+		[ -z "$_depends" ] && eval _depends=\$RC_$2
+
+		$1 $_depends
+	done
+}
+
 # Add our sbin to $PATH
 case "$PATH" in
 	"$RC_LIBEXECDIR"/sbin|"$RC_LIBEXECDIR"/sbin:*);;

sh/rc-mount.sh

@@ -26,6 +26,8 @@ do_unmount()
 		# Unmounting a shared mount can unmount other mounts, so
 		# we need to check the mount is still valid
 		mountinfo --quiet "$mnt" || continue
+		# Ensure we interpret all characters properly.
+		mnt=$(printf "$mnt")
 
 		case "$cmd" in
 			umount)
@@ -36,7 +38,7 @@ do_unmount()
 				;;
 		esac
 
-		retry=3
+		retry=4 # Effectively TERM, sleep 1, TERM, sleep 1, KILL, sleep 1
 		while ! LC_ALL=C $cmd "$mnt" 2>/dev/null; do
 			if type fuser >/dev/null 2>&1; then
 				pids="$(fuser $f_opts "$mnt" 2>/dev/null)"
@@ -53,13 +55,16 @@ do_unmount()
 					eend 1 "in use but fuser finds nothing"
 					retry=0;;
 				*)
-					local sig="KILL"
-					[ $retry -gt 0 ] && sig="TERM"
-					fuser $f_kill$sig -k $f_opts \
-						"$mnt" >/dev/null 2>&1
-					sleep 1
-					retry=$(($retry - 1))
-					[ $retry -le 0 ] && eend 1
+					if [ $retry -le 0 ]; then
+						eend 1
+					else
+						local sig="TERM"
+						retry=$(($retry - 1))
+						[ $retry = 1 ] && sig="KILL"
+						fuser $f_kill$sig -k $f_opts \
+							"$mnt" >/dev/null 2>&1
+						sleep 1
+					fi
 					;;
 			esac
 			[ $retry -le 0 ] && break

sh/runscript.sh.in

@@ -187,8 +187,14 @@ done
 unset _f
 
 while [ -n "$1" ]; do
+	# Sepcial case depend
+	if [ "$1" = depend ]; then
+		shift
+		_depend
+		continue
+	fi
 	# See if we have the required function and run it
-	for _cmd in describe start stop status depend ${extra_commands:-$opts} \
+	for _cmd in describe start stop status ${extra_commands:-$opts} \
 		$extra_started_commands
 	do
 		if [ "$_cmd" = "$1" ]; then

src/libeinfo/libeinfo.c

@@ -643,7 +643,7 @@ static int EINFO_PRINTF(3, 0)
 		fprintf(f, "\n");
 	if (_eprefix)
 		fprintf(f, "%s%s%s|", _ecolor(f, color), _eprefix, _ecolor(f, ECOLOR_NORMAL));
-	fprintf(f, "%s*%s ", _ecolor(f, color), _ecolor(f, ECOLOR_NORMAL));
+	fprintf(f, " %s*%s ", _ecolor(f, color), _ecolor(f, ECOLOR_NORMAL));
 	retval += _eindent(f);
 	va_copy(ap, va);
 	retval += vfprintf(f, fmt, ap) + 3;
@@ -800,7 +800,7 @@ ebegin(const char *EINFO_RESTRICT fmt, ...)
 	va_start(ap, fmt);
 	retval = _einfovn(fmt, ap);
 	va_end(ap);
-	retval += printf("...");
+	retval += printf(" ...");
 	if (colour_terminal(stdout))
 		retval += printf("\n");
 	LASTCMD("ebegin");
@@ -817,7 +817,7 @@ _eend(FILE * EINFO_RESTRICT fp, int col, ECOLOR color, const char *msg)
 	if (!msg)
 		return;
 
-	cols = get_term_columns(fp) - (strlen(msg) + 3);
+	cols = get_term_columns(fp) - (strlen(msg) + 5);
 
 	/* cons25 is special - we need to remove one char, otherwise things
 	 * do not align properly at all. */
@@ -831,18 +831,15 @@ _eend(FILE * EINFO_RESTRICT fp, int col, ECOLOR color, const char *msg)
 	if (term_is_cons25)
 		cols--;
 
-	/* If extra spacing is required around msg, then please change
-	 * via a runtime knob and leave this default as is as it saves 2 
-	 * valuable columns when running on 80 column screens. */
 	if (cols > 0 && colour_terminal(fp)) {
-		fprintf(fp, "%s%s %s[%s%s%s]%s\n", up, tgoto(goto_column, 0, cols),
+		fprintf(fp, "%s%s %s[%s %s %s]%s\n", up, tgoto(goto_column, 0, cols),
 		    ecolor(ECOLOR_BRACKET), ecolor(color), msg,
 		    ecolor(ECOLOR_BRACKET), ecolor(ECOLOR_NORMAL));
 	} else {
 		if (col > 0)
 			for (i = 0; i < cols - col; i++)
 				fprintf(fp, " ");
-		fprintf(fp, " [%s]\n", msg);
+		fprintf(fp, " [ %s ]\n", msg);
 	}
 }
 
@@ -1030,7 +1027,7 @@ ebeginv(const char *EINFO_RESTRICT fmt, ...)
 
 	va_start(ap, fmt);
 	retval = _einfovn(fmt, ap);
-	retval += printf("...");
+	retval += printf(" ...");
 	if (colour_terminal(stdout))
 		retval += printf("\n");
 	va_end(ap);

src/librc/librc.c

@@ -377,7 +377,7 @@ rc_runlevel_stacks(const char *runlevel)
 }
 librc_hidden_def(rc_runlevel_stacks)
 
-/* Resolve a service name to it's full path */
+/* Resolve a service name to its full path */
 char *
 rc_service_resolve(const char *service)
 {

src/librc/rc.h.in

@@ -117,7 +117,7 @@ bool rc_runlevel_stopping(void);
 
 /*! @name RC
  * A service can be given as a full path or just its name.
- * If its just a name then we try to resolve the service to a full path.
+ * If it's just a name then we try to resolve the service to a full path.
  * This should allow the use if local init.d directories in the future. */
 
 /*! @brief States a service can be in */
@@ -326,7 +326,7 @@ typedef void *RC_DEPTREE;
 #endif
 
 /*! Check to see if source is newer than target.
- * If target is a directory then we traverse it and it's children.
+ * If target is a directory then we traverse it and its children.
  * @param source
  * @param target
  * @param mtime of newest target
@@ -335,7 +335,7 @@ typedef void *RC_DEPTREE;
 bool rc_newer_than(const char *, const char *, time_t *, char *);
 
 /*! Check to see if source is older than target.
- * If target is a directory then we traverse it and it's children.
+ * If target is a directory then we traverse it and its children.
  * @param source
  * @param target
  * @param mtime of oldest target
@@ -446,7 +446,7 @@ RC_STRINGLIST *rc_config_load(const char *);
 /*! Return the value of the entry from a key=value list. */
 char *rc_config_value(RC_STRINGLIST *, const char *);
 
-/*! Check if a variable is a boolean and return it's value.
+/*! Check if a variable is a boolean and return its value.
  * If variable is not a boolean then we set errno to be ENOENT when it does
  * not exist or EINVAL if it's not a boolean.
  * @param variable to check
@@ -485,9 +485,9 @@ bool rc_stringlist_delete(RC_STRINGLIST *, const char *);
  * @return pointer to item */
 RC_STRING *rc_stringlist_find(RC_STRINGLIST *, const char *);
 
-/*! Split a string into a stringlist based on seperator.
+/*! Split a string into a stringlist based on separator.
  * @param string to split
- * @param seperator
+ * @param separator
  * @return new list */
 RC_STRINGLIST *rc_stringlist_split(const char *, const char *);
 

src/rc/fstabinfo.c

@@ -38,7 +38,7 @@
 #include <string.h>
 #include <unistd.h>
 
-/* Yay for linux and it's non liking of POSIX functions.
+/* Yay for linux and its non liking of POSIX functions.
    Okay, we could use getfsent but the man page says use getmntent instead
    AND we don't have getfsent on uclibc or dietlibc for some odd reason. */
 #ifdef __linux__

src/rc/rc-applets.c

@@ -467,7 +467,7 @@ run_applets(int argc, char **argv)
 		}
 		exit(EXIT_FAILURE);
 	};
-	/* This tets is correct as it's not present in baselayout */
+	/* This test is correct as it's not present in baselayout */
 	if (strcmp(applet, "is_newer_than") == 0) {
 		if (argc < 3)
 			exit (EXIT_FAILURE);

src/rc/rc-update.c

@@ -219,6 +219,7 @@ static const char * const longopts_help[] = {
 int
 rc_update(int argc, char **argv)
 {
+	RC_DEPTREE *deptree;
 	RC_STRINGLIST *runlevels;
 	RC_STRING *runlevel;
 	char *service = NULL;
@@ -238,7 +239,9 @@ rc_update(int argc, char **argv)
 		    stack = true;
 		break;
 		case 'u':
-			_rc_deptree_load(-1, &ret);
+			deptree = _rc_deptree_load(-1, &ret);
+			if (deptree)
+				rc_deptree_free(deptree);
 			return ret;
 			case_RC_COMMON_GETOPT;
 		}

src/rc/rc.c

@@ -773,7 +773,7 @@ handle_bad_signal(int sig)
 #endif
 
 #include "_usage.h"
-#define getoptstring "o:" getoptstring_COMMON
+#define getoptstring "o:s:S" getoptstring_COMMON
 static const struct option longopts[] = {
 	{ "override", 1, NULL, 'o' },
 	{ "service",  1, NULL, 's' },

src/rc/runscript.c

@@ -739,6 +739,8 @@ svc_start_deps(void)
 		free(tmp);
 	}
 
+	rc_stringlist_free(tmplist);
+	tmplist = NULL;
 	rc_stringlist_free(services);
 	services = NULL;
 }
@@ -998,7 +1000,7 @@ svc_restart(void)
 	 * dns via resolvconf, so you could have openvpn trying to restart
 	 * dnsmasq which in turn is waiting on net which in turn is waiting
 	 * on dnsmasq.
-	 * The work around is for resolvconf to restart it's services with
+	 * The work around is for resolvconf to restart its services with
 	 * --nodeps which means just that.
 	 * The downside is that there is a small window when our status is
 	 * invalid.
@@ -1106,7 +1108,7 @@ runscript(int argc, char **argv)
 	atexit(cleanup);
 
 	/* We need to work out the real full path to our service.
-	 * This works fine, provided that we ONLY allow mulitplexed services
+	 * This works fine, provided that we ONLY allow multiplexed services
 	 * to exist in the same directory as the master link.
 	 * Also, the master link as to be a real file in the init dir. */
 	if (!realpath(argv[1], path)) {
@@ -1192,7 +1194,7 @@ runscript(int argc, char **argv)
 
 	deps = true;
 	
-	/* Punt the first arg as it's our service name */
+	/* Punt the first arg as its our service name */
 	argc--;
 	argv++;
 
@@ -1316,6 +1318,12 @@ runscript(int argc, char **argv)
 			prefix = NULL;
 			retval = svc_exec("status", NULL);
 		} else {
+			if (strcmp(optarg, "pause") == 0) {
+				ewarn("WARNING: 'pause' is deprecated; please use '--nodeps stop'");
+				deps = false;
+				optarg = "stop";
+			}
+
 			if (strcmp(optarg, "conditionalrestart") == 0 ||
 			    strcmp(optarg, "condrestart") == 0)
 			{