release openrc-0.6.8

The _netdev option in fstab on linux systems indicates
that a filesystem should only be mounted if the network is available.

This commit fixes netmount to support this.

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.6.1
+VERSION=	0.6.8
 PKG=		${NAME}-${VERSION}

doc/net.example.Linux.in

@@ -896,7 +896,7 @@
 # and you're done :)
 
 # By default we don't wait for netplug/ifplugd to configure the interface.
-# If you would like it to wait so that other services now that network is up
+# If you would like it to wait so that other services know that network is up
 # then you can specify a timeout here.
 #plug_timeout="10"
 # A value of 0 means wait forever.
@@ -936,8 +936,8 @@
 
 #preup() {
 #	# Test for link on the interface prior to bringing it up.  This
-#	# only works on some network adapters and requires the mii-diag
-#	# package to be installed.
+#	# only works on some network adapters and requires the
+#	# sys-apps/net-tools package to be installed.
 #	if mii-tool "${IFACE}" 2> /dev/null | grep -q 'no link'; then
 #		ewarn "No link on ${IFACE}, aborting configuration"
 #		return 1

etc/rc.conf.in

@@ -11,7 +11,8 @@
 
 # Set rc_interactive to "YES" and you'll be able to press the I key during
 # boot so you can choose to start specific services. Set to "NO" to disable
-# this feature.
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
 #rc_interactive="YES"
 
 # If we need to drop to a shell, you can specify it here.
@@ -75,8 +76,14 @@
 # Set unicode to YES to turn on unicode support for keyboards and screens.
 #unicode="NO"
 
-# Network fstypes. Below is the default.
-net_fs_list="afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs nfs nfs4 ocfs2 shfs smbfs"
+# Below is the default list of network fstypes.
+#
+# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
 
 ##############################################################################
 # SERVICE CONFIGURATION VARIABLES

init.d/bootmisc.in

@@ -4,7 +4,6 @@
 
 depend()
 {
-	use hostname
 	need localmount
 	before logger
 	after clock sysctl
@@ -36,6 +35,12 @@ cleanup_tmp_dir()
 		# Faster than find
 		rm -rf -- [^ajlq\.]*
 
+		# pam_mktemp creates a .private directory within which
+		# each user gets a private directory with immutable
+		# bit set; remove the immutable bit before trying to
+		# remove it.
+		[ -d /tmp/.private ] && chattr -R -a /tmp/.private 2> /dev/null
+
 		find $startopts ! -name . \
 			! -path "./lost+found" \
 			! -path "./lost+found/*" \
@@ -49,8 +54,6 @@ cleanup_tmp_dir()
 			! -path "./aquota.group/*" \
 			! -path "./journal" \
 			! -path "./journal/*" \
-			! -path "./.private" \
-			! -path "./.private/*" \
 			-exec rm -rf {} \;
 		eend 0
 	else

init.d/consolefont.in

@@ -8,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after hotplug bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 start()

init.d/keymaps.in

@@ -8,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 start()

init.d/local.in

@@ -18,11 +18,6 @@ start()
 		local_start
 	fi
 
-	# Support old configs
-	if [ -e @SYSCONFDIR@/conf.d/local.start ]; then
-		. @SYSCONFDIR@/conf.d/local.start
-	fi
-
 	eend $? "Failed to start local"
 }
 
@@ -34,10 +29,5 @@ stop()
 		local_stop
 	fi
 
-	# Support old configs
-	if [ -e @SYSCONFDIR@/conf.d/local.stop ]; then
-		. @SYSCONFDIR@/conf.d/local.stop
-	fi
-
 	eend $? "Failed to stop local"
 }

init.d/localmount.in

@@ -14,13 +14,16 @@ depend()
 start()
 {
 	# Mount local filesystems in /etc/fstab.
-	local types="noproc" x=
+	local types="noproc" x= no_netdev=
 	for x in $net_fs_list; do
 		types="${types},${x}"
 	done
 
+	if [ "$RC_UNAME" = Linux ]; then
+		no_netdev="-O no_netdev"
+	fi
 	ebegin "Mounting local filesystems"
-	mount -at "$types"
+	mount -at "$types" $no_netdev
 	eend $? "Some local filesystem failed to mount"
 
 	# Always return 0 - some local mounts may not be critical for boot

init.d/netmount.in

@@ -43,7 +43,7 @@ start()
 	local myneed= myuse= pmap="portmap" nfsmounts=
 	[ -x @SYSCONFDIR@/init.d/rpcbind ] && pmap="rpcbind"
 
-	local x= fs=
+	local x= fs= rc=
 	for x in $net_fs_list; do
 		case "$x" in
 			nfs|nfs4)
@@ -65,7 +65,12 @@ start()
 
 	ebegin "Mounting network filesystems"
 	mount -at $fs
-	ewend $? "Could not mount all network filesystems"
+	rc=$?
+	if [ "$RC_UNAME" = Linux ]; then
+		mount -a -O _netdev
+		rc=$?
+	fi
+	ewend $rc "Could not mount all network filesystems"
 	return 0
 }
 
@@ -93,5 +98,9 @@ stop()
 	retval=$?
 
 	eoutdent
+	if [ "$RC_UNAME" = Linux ]; then
+		umount -a -O _netdev
+		retval=$?
+	fi
 	eend $retval "Failed to unmount network filesystems"
 }

init.d/network.in

@@ -63,17 +63,9 @@ tentative()
 
 	case "$RC_UNAME" in
 	Linux)
-		[ -x /sbin/ip ] || return 1
-		LC_ALL=C ip addr show | while read inet address rest; do
-	 		case "${inet}" in
-			inet6)
-				case "${rest}" in
-				*" "tentative*) return 2;;
-				esac
-				;;
-			esac
-		done
-		[ $? = 2 ]
+		[ -x /sbin/ip ] || [ -x /bin/ip ] || return 1
+		[ -n "$(ip -f inet6 addr show tentative)" ]
+		;;
 	*)
 		local inet= address= rest=
 		LC_ALL=C ifconfig -a | while read inet address rest; do
@@ -169,7 +161,7 @@ runip()
 routeflush()
 {
 	if [ "$RC_UNAME" = Linux ]; then
-		if [ -x /sbin/ip ]; then
+		if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
 			ip route flush scope global
 			ip route delete default 2>/dev/null
 		else
@@ -231,8 +223,6 @@ start()
 	routeflush
 	if [ "$RC_UNAME" = "Linux" ]; then
 		ifconfig lo 127.0.0.1 netmask 255.0.0.0 || cr=1 
-		route add -net 127.0.0.0 netmask 255.0.0.0 \
-			gw 127.0.0.1 2>/dev/null
 		route add -net 127.0.0.0 netmask 255.0.0.0 \
 			gw 127.0.0.1 reject 2>/dev/null
 	else
@@ -289,9 +279,14 @@ start()
 	r=5
 	while [ $r -gt 0 ]; do
 		tentative || break
+		[ $r = 5 ] && vebegin "Waiting for tentative addresses"
 		sleep 1
 		r=$(($r - 1))
 	done
+	if [ $r != 5 ]; then
+		[ $r != 0 ]
+		veend $?
+	fi
 	
 	if [ -n "$defaultroute" ]; then
 		ebegin "Setting default route $defaultroute"
@@ -343,7 +338,7 @@ stop()
 		then
 			veinfo "$int"
 			runargs /etc/ifdown."$int" "$downcmd"
-			if [ -x /sbin/ip ]; then
+			if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
 				# We need to do this, otherwise we may
 				# fail to add things correctly on restart
 				ip address flush dev "$int" 2>/dev/null

init.d/sysctl.BSD.in

@@ -4,7 +4,6 @@
 
 depend()
 {
-	use hostname
 	before bootmisc logger
 	keyword -prefix
 }

init.d/sysctl.Linux.in

@@ -4,7 +4,6 @@
 
 depend()
 {
-	use hostname
 	before bootmisc logger
 	keyword -openvz -prefix -vserver
 }

net/bonding.sh

@@ -15,7 +15,14 @@ _is_bond()
 
 bonding_pre_start()
 {
-	local x= s= slaves="$(_get_array "slaves_${IFVAR}")" 
+	local x= s= n= slaves= primary=
+
+	slaves="$(_get_array "slaves_${IFVAR}")"
+	unset slaves_${IFVAR}
+
+	eval primary="\$primary_${IFVAR}"
+	unset primary_${IFVAR}
+
 
 	[ -z "${slaves}" ] && return 0
 
@@ -39,13 +46,31 @@ bonding_pre_start()
 		return 1
 	fi
 
-	# Configure the bond.
-	# Nice and dynamic :)
+	# Interface must be down in order to configure
+	_down
+
+	# Configure the bond mode, then we can reloop to ensure we configure
+	# All other options
+	for x in /sys/class/net/"${IFACE}"/bonding/mode; do
+		[ -f "${x}" ] || continue
+		n=${x##*/}
+		eval s=\$${n}_${IFVAR}
+		if [ -n "${s}" ]; then
+			einfo "Setting ${n}: ${s}"
+			echo "${s}" >"${x}" || \
+			eerror "Failed to configure $n (${n}_${IFVAR})"
+		fi
+	done
+	# Nice and dynamic for remaining options:)
 	for x in /sys/class/net/"${IFACE}"/bonding/*; do
 		[ -f "${x}" ] || continue
-		eval s=\$${x##*/}_${IFVAR}
+		n=${x##*/}
+		eval s=\$${n}_${IFVAR}
+		[ "${n}" != "mode" ] || continue
 		if [ -n "${s}" ]; then
-			echo "${s}" >"${x}"
+			einfo "Setting ${n}: ${s}"
+			echo "${s}" >"${x}" || \
+			eerror "Failed to configure $n (${n}_${IFVAR})"
 		fi
 	done
 
@@ -72,6 +97,11 @@ bonding_pre_start()
 	# finally add in slaves
 	eoutdent
 	if [ -d /sys/class/net ]; then
+		if [ -n "${primary}" ]; then
+			echo "+${primary}" >/sys/class/net/"${IFACE}"/bonding/slaves
+			echo "${primary}" >/sys/class/net/"${IFACE}"/bonding/primary
+			slaves="${slaves/${primary}/}"
+		fi
 		for s in ${slaves}; do
 			echo "+${s}" >/sys/class/net/"${IFACE}"/bonding/slaves
 		done
@@ -117,6 +147,12 @@ bonding_stop()
 	done
 	)
 
+	_down
+
+	if [ -d /sys/class/net ]; then
+		echo "-${IFACE}" > /sys/class/net/bonding_masters
+	fi
+
 	eend 0
 	return 0
 }

net/dhclient.sh

@@ -17,6 +17,7 @@ dhclient_start()
 
 	# Get our options
 	# These options only work in Gentoo, and maybe RedHat
+	eval args=\$dhclient_${IFVAR}
 	eval opts=\$dhcp_${IFVAR}
 	[ -z "${opts}" ] && opts=${dhcp}
 

net/iproute2.sh

@@ -1,9 +1,18 @@
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
+_ip()
+{
+	if [ -x /bin/ip ]; then
+		echo /bin/ip
+	else
+		echo /sbin/ip
+	fi
+}
+
 iproute2_depend()
 {
-	program /sbin/ip
+	program $(_ip)
 	provide interface
 	after ifconfig
 }
@@ -160,7 +169,8 @@ _add_route()
 
 	# We cannot use a metric if we're using a nexthop
 	if ! ${have_metric} && \
-		[ -n "${metric}" -a -z "${cmd##* nexthop }" ]
+		[ -n "${metric}" -a \
+			"${cmd##* nexthop }" = "$cmd" ]
 	then
 		cmd="${cmd} metric ${metric}"
 	fi

net/vlan.sh

@@ -20,7 +20,7 @@ _is_vlan()
 _get_vlans()
 {
 	[ -e /proc/net/vlan/config ] || return 1
-	sed -n -e 's/^\(.*[0-9]\) \(.* \) .*'"${IFACE}"'$/\1/p' /proc/net/vlan/config
+	sed -n -e 's/^\W*\([^ ]*\) \(.* \) .*'"${IFACE}"'$/\1/p' /proc/net/vlan/config
 }
 
 _check_vlan()

net/wpa_supplicant.sh

@@ -3,10 +3,14 @@
 
 wpa_supplicant_depend()
 {
-	if [ -x /usr/sbin/wpa_supplicant ]; then
-		program start /usr/sbin/wpa_supplicant
-	else
-		program start /sbin/wpa_supplicant
+	wpas=/usr/sbin/wpa_supplicant
+	[ -x ${wpas} ] || wpas=/sbin/wpa_supplicant
+	if [ -x ${wpas} ]; then
+		program start ${wpas}
+		# bug 345281: if wpa_supplicant is built w/ USE=dbus, we need to start
+		# dbus before we can start wpa_supplicant.
+		${wpas} -h |grep DBus -sq
+		[ $? -eq 0 ] && need dbus
 	fi
 	after macnet plug
 	before interface

pkgconfig/Makefile

@@ -2,7 +2,8 @@ DIR=	${LIBDIR}/pkgconfig
 SRCS=	einfo.pc.in openrc.pc.in
 INC=	einfo.pc openrc.pc
 
-sed -n -e 's/^VERSION=[[:space:]]*\([^[:space:]]*\).*/#define VERSION "\1${GITVER}\"/p' ../../Makefile > version.h
+.DEFAULT:
+	${SED} -n -e 's/^VERSION=[[:space:]]*\([^[:space:]]*\).*/#define VERSION "\1${GITVER}\"/p' ../../Makefile > version.h
 
 SED_EXTRA=	-e 's:@VERSION@:${VERSION}:g'
 

scripts/on_ac_power

@@ -6,26 +6,30 @@
 if [ -f /proc/acpi/ac_adapter/AC*/state ]; then
 	cat /proc/acpi/ac_adapter/AC*/state | while read line; do
 		case "$line" in
-		"state:"*"off-line") return 128;;
+		"state:"*"off-line") exit 128;;
 		esac
 	done
+elif [ -f /sys/class/power_supply/AC*/online ]; then
+	cat /sys/class/power_supply/AC*/online | while read line; do
+		[ "${line}" = 0 ] && exit 128
+	done
 elif [ -f /proc/pmu/info ]; then
 	cat /proc/pmu/info | while read line; do
 		case "$line" in
-		"AC Power"*": 0") return 128;;
+		"AC Power"*": 0") exit 128;;
 		esac
 	done
 elif type envstat >/dev/null 2>&1; then
 	# NetBSD has envstat
 	envstat -d acpiacad0 2>/dev/null | while read line; do
 		case "$line" in
-		"connected:"*"OFF") return 128;;
+		"connected:"*"OFF") exit 128;;
 		esac
 	done
 elif sysctl -q hw.acpi.acline >/dev/null 2>/dev/null; then
 	case $(sysctl -n hw.acpi.acline) in
-	0) return 1;;
-	*) return 0;;
+	0) exit 1;;
+	*) exit 0;;
 	esac
 else
 	exit 255

sh/init-early.sh.Linux.in

@@ -17,7 +17,7 @@ fi
 if [ -e /etc/runlevels/"$RC_DEFAULTLEVEL"/consolefont \
 	 -o -e /etc/runlevels/"$RC_BOOTLEVEL"/consolefont ]; then
 	printf "\033%s" "$termencoding" >"$CONSOLE" 2>/dev/null
-	if [ -r "$RC_LIBEXECDIR"/console/font -a -x /bin/setfont ]; then
+	if [ -r "$RC_LIBEXECDIR"/console/font -a -x /usr/bin/setfont ]; then
 		font="$(cat "$RC_LIBEXECDIR"/console/font)"
 		[ -c "$CONSOLE" ] && cons="-C $CONSOLE"
 		setfont $cons "$RC_LIBEXECDIR"/console/"$font" 2>/dev/null
@@ -29,7 +29,7 @@ if [ -e /etc/runlevels/"$RC_DEFAULTLEVEL"/keymaps \
 	 -o -e /etc/runlevels/"$RC_BOOTLEVEL"/keymaps ]; then
 	kbd_mode $kmode -C "$CONSOLE" 2>/dev/null
 	if [ -r "$RC_LIBEXECDIR"/console/keymap ]; then
-		loadkeys "$RC_LIBEXECDIR"/console/keymap 2>/dev/null
+		loadkeys -q "$RC_LIBEXECDIR"/console/keymap 2>/dev/null
 	fi
 fi
 

sh/init.sh.Linux.in

@@ -6,6 +6,17 @@
 # This basically mounts $RC_SVCDIR as a ramdisk.
 # The tricky part is finding something our kernel supports
 # tmpfs and ramfs are easy, so force one or the other.
+svcdir_restorecon()
+{
+	local rc=0
+	if [ -x /usr/sbin/selinuxenabled -a -c /selinux/null ] &&
+	  selinuxenabled; then
+		restorecon $RC_SVCDIR
+		rc=$?
+	fi
+	return $rc
+}
+
 mount_svcdir()
 {
 	# mount from fstab if we can
@@ -16,8 +27,12 @@ mount_svcdir()
 
 	# Some buggy kernels report tmpfs even when not present :(
 	if grep -Eq "[[:space:]]+tmpfs$" /proc/filesystems; then
-		mount -n -t tmpfs $fsopts,mode=755,size=${svcsize}k \
-			rc-svcdir "$RC_SVCDIR" && return 0
+		local tmpfsopts="${fsopts},mode=755,size=${svcsize}k"
+		mount -n -t tmpfs $tmpfsopts rc-svcdir "$RC_SVCDIR"
+		if [ $? -eq 0 ]; then
+			svcdir_restorecon
+			[ $? -eq 0 ] && return 0
+		fi
 	fi
 	
 	if grep -Eq "[[:space:]]+ramfs$" /proc/filesystems; then
@@ -38,6 +53,10 @@ mount_svcdir()
 	fi
 
 	mount -n -t "$fs" $fsopts rc-svcdir "$RC_SVCDIR"
+	if [ $? -eq 0 ]; then
+		svcdir_restorecon
+		[ $? -eq 0 ] && return 0
+	fi
 }
 
 . "$RC_LIBEXECDIR"/sh/functions.sh

sh/rc-functions.sh.in

@@ -38,7 +38,8 @@ stop_addon()
 	( import_addon "$1-stop" )
 }
 
-net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
+net_fs_list="afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre
+ncpfs nfs nfs4 ocfs2 shfs smbfs $extra_net_fs_list"
 is_net_fs()
 {
 	[ -z "$1" ] && return 1

sh/rc-mount.sh

@@ -26,6 +26,8 @@ do_unmount()
 		# Unmounting a shared mount can unmount other mounts, so
 		# we need to check the mount is still valid
 		mountinfo --quiet "$mnt" || continue
+		# Ensure we interpret all characters properly.
+		mnt=$(printf "$mnt")
 
 		case "$cmd" in
 			umount)

src/libeinfo/libeinfo.c

@@ -643,7 +643,7 @@ static int EINFO_PRINTF(3, 0)
 		fprintf(f, "\n");
 	if (_eprefix)
 		fprintf(f, "%s%s%s|", _ecolor(f, color), _eprefix, _ecolor(f, ECOLOR_NORMAL));
-	fprintf(f, "%s*%s ", _ecolor(f, color), _ecolor(f, ECOLOR_NORMAL));
+	fprintf(f, " %s*%s ", _ecolor(f, color), _ecolor(f, ECOLOR_NORMAL));
 	retval += _eindent(f);
 	va_copy(ap, va);
 	retval += vfprintf(f, fmt, ap) + 3;
@@ -800,7 +800,7 @@ ebegin(const char *EINFO_RESTRICT fmt, ...)
 	va_start(ap, fmt);
 	retval = _einfovn(fmt, ap);
 	va_end(ap);
-	retval += printf("...");
+	retval += printf(" ...");
 	if (colour_terminal(stdout))
 		retval += printf("\n");
 	LASTCMD("ebegin");
@@ -817,7 +817,7 @@ _eend(FILE * EINFO_RESTRICT fp, int col, ECOLOR color, const char *msg)
 	if (!msg)
 		return;
 
-	cols = get_term_columns(fp) - (strlen(msg) + 3);
+	cols = get_term_columns(fp) - (strlen(msg) + 5);
 
 	/* cons25 is special - we need to remove one char, otherwise things
 	 * do not align properly at all. */
@@ -831,18 +831,15 @@ _eend(FILE * EINFO_RESTRICT fp, int col, ECOLOR color, const char *msg)
 	if (term_is_cons25)
 		cols--;
 
-	/* If extra spacing is required around msg, then please change
-	 * via a runtime knob and leave this default as is as it saves 2 
-	 * valuable columns when running on 80 column screens. */
 	if (cols > 0 && colour_terminal(fp)) {
-		fprintf(fp, "%s%s %s[%s%s%s]%s\n", up, tgoto(goto_column, 0, cols),
+		fprintf(fp, "%s%s %s[%s %s %s]%s\n", up, tgoto(goto_column, 0, cols),
 		    ecolor(ECOLOR_BRACKET), ecolor(color), msg,
 		    ecolor(ECOLOR_BRACKET), ecolor(ECOLOR_NORMAL));
 	} else {
 		if (col > 0)
 			for (i = 0; i < cols - col; i++)
 				fprintf(fp, " ");
-		fprintf(fp, " [%s]\n", msg);
+		fprintf(fp, " [ %s ]\n", msg);
 	}
 }
 
@@ -1030,7 +1027,7 @@ ebeginv(const char *EINFO_RESTRICT fmt, ...)
 
 	va_start(ap, fmt);
 	retval = _einfovn(fmt, ap);
-	retval += printf("...");
+	retval += printf(" ...");
 	if (colour_terminal(stdout))
 		retval += printf("\n");
 	va_end(ap);

src/rc/rc.c

@@ -773,7 +773,7 @@ handle_bad_signal(int sig)
 #endif
 
 #include "_usage.h"
-#define getoptstring "o:" getoptstring_COMMON
+#define getoptstring "o:s:S" getoptstring_COMMON
 static const struct option longopts[] = {
 	{ "override", 1, NULL, 'o' },
 	{ "service",  1, NULL, 's' },

src/rc/runscript.c

@@ -350,6 +350,8 @@ svc_exec(const char *arg1, const char *arg2)
 	size_t bytes;
 	bool prefixed = false;
 	int slave_tty;
+	sigset_t sigchldmask;
+	sigset_t oldmask;
 
 	/* Setup our signal pipe */
 	if (pipe(signal_pipe) == -1)
@@ -439,10 +441,17 @@ svc_exec(const char *arg1, const char *arg2)
 	}
 
 	free(buffer);
+
+	sigemptyset (&sigchldmask);
+	sigaddset (&sigchldmask, SIGCHLD);
+	sigprocmask (SIG_BLOCK, &sigchldmask, &oldmask);
+
 	close(signal_pipe[0]);
 	close(signal_pipe[1]);
 	signal_pipe[0] = signal_pipe[1] = -1;
 
+	sigprocmask (SIG_SETMASK, &oldmask, NULL);
+	
 	if (master_tty >= 0) {
 		/* Why did we do this? */
 		/* signal (SIGWINCH, SIG_IGN); */
@@ -1318,6 +1327,12 @@ runscript(int argc, char **argv)
 			prefix = NULL;
 			retval = svc_exec("status", NULL);
 		} else {
+			if (strcmp(optarg, "pause") == 0) {
+				ewarn("WARNING: 'pause' is deprecated; please use '--nodeps stop'");
+				deps = false;
+				optarg = "stop";
+			}
+
 			if (strcmp(optarg, "conditionalrestart") == 0 ||
 			    strcmp(optarg, "condrestart") == 0)
 			{