The current check only tries to detect whether /sys/fs/cgroup exists and
whether it is writable or not. But when the init system doesn't mount
cgroups then /sys/fs/cgroup will just be an empty directory. When paired
with unprivileged containers that mount sysfs this will cause misleading
errors to be printed since /sys/fs/cgroup will be owned by user
nobody:nogroup in this case. Independent of this specific problem this
check will also be misleading when the /sys/fs/cgroup exists and is in
fact writable by the init system but isn't actually a mountpoint.
Note from William. "grep -qs" doesn't need to redirect output to
/dev/null since it is completely silent.
This fixes#209.
This is our own version of asprintf(). This original code was written by
Mike Frysinger, and I was able to modify it to use our memory helper
functions.
We need a version of this code because it is not available on glibc at
least without defining _GNU_SOURCE, and I would rather not do that.
This is the first step in improving string handling in OpenRC for #207.
The "Ar" tag for the mountinfo command contained a typo (leading
space) that resulted in the tag being output verbatim; that is,
mountinfo ... .Ar mount1 mount2
rather than e.g.
mountinfo ... <mount1> <mount2>
This commit deletes the leading space to fix the output.
This fixes#204.
The BUILTINS are all surrounded by Xo...Xc tags, but the opening "Xo"
was missing from the two commands fstabinfo and mountinfo. This commit
adds them, and thereby fixes the spacing when viewed by man.
This is for #204.
Refer to /var/run in the documentation instead of /run, and make it
clear at the top of the pidfile section that we use /run under Linux.
This is for #202.
This is related to #195.
This is an attempt to shorten the window for the first two issues
discussed by using a file descriptor which does not follow symbolic
links and using the fchmod and fchown calls instead of chown and chmod.
with.
rc_deptree_update_needed would return early as soon as it found
any file newer than the existing dependency cache. Unfortunately,
the first file found may not be the newest one there; so the
clock skew workaround in rc-misc:_rc_deptree_load would be given
a timestamp that was still too old.
This fix forces a full scan of all relevant files, so as to
ensure that we return a timestamp that will allow the clock skew
fix to operate. The runtime cost is no worse than the case where
the cache is up to date (ie. we must check every possible file).
This fixes#161.
Add the following variables to expose more arguments that can be passed
to start-stop-daemon or supervise-daemon:
- directory will be passed to --chdir
- error_log will be passed to --stderr
- output_log will be passed to --stdout
- umask will be passed to umask
This is for #184.
Add the ability to force-kill a service if it does not go down
successfully. Also, adjust the default wait time for an s6 service to go
down to 60 seconds.
The OpenRC team does not currently know of any modern linux tools that
require /etc/mtab to be a flat file, so this puts users on notice that
the mtab service will be removed in the future.
localmount had mtab in its "use" dependencies; however, it makes more
sense to add "before localmount" to the mtab service and remove
"use mtab" from the localmount service.
Ignore namespaces if there are errors reading either the pid namespace
for the current process or the process we aare testing.
This fixes https://github.com/openrc/openrc/issues/180.
This is to be used if the service is being supervised and the
supervisor is somehow killed.
Currently, this is very linux specific, but I will expand to other
platforms, patches are welcome.
- Harden against dying by handling all signals that would terminate the
program and adding --reexec support
- factor the supervisor into its own function
- fix test for whether we are already running
Prior to this change, we were logging unexpected terminations of daemons
we were supervising at the info level. This change moves the logs to
warnings.
The sysfs init script referred to @LIBEXECDIR@ before this change, but
it is better to refer to RC_LIBEXECDIR so that we get rid of a sed
substitution.
The service binary was just a synonym for rc-service, so use rc-service
instead of service. If you want a "service" binary, it should be
something that can determine which service manager you are running and
run the appropriate service manager commands.
rc-selinux.c: In function ‘selinux_setup’:
rc-selinux.c:361:9: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
curr_t = context_type_get(curr_con);
^
Instead of looping and sending multiple signals to child processes in
cgroup_cleanup, we send sigterm followed by sleeping one second then
sigkill.
This brings us more in line with systemd's "control group" killmode
setting.
Also, this commit includes several shellcheck cleanups.
The --retry option for supervise-daemon defines how the supervisor will
attempt to stop the child process it is monitoring. It is defined when
the supervisor is started since stopping the supervisor just sends a
signal to the active supervisor.
This fixes#160.
This makes the halt wrapper sysvinit compatible. It ignores several
command line switches which are not currently implemented; however,
those can be implemented if we need to do so.
This fixes https://github.com/openrc/openrc/issues/146.
The syntax for expanding a variable with a default value is
${parameter:-word}
not
${parameter-word}
although the latter still works for a reason I could not explain.
This fixes#143.
Sysvinit shutdown has a default of single user mode, but openrc-shutdown
makes you choose a default action. Because of this, the shutdown wrapper
needs to pass --single to openrc-shutdown.
How to reproduce 1-byte overflow:
```
$ FEATURES=-test CFLAGS="-fsanitize=address -O0 -ggdb3" emerge -1 openrc
=================================================================
==1==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7fff0efd8710
at pc 0x000000402076 bp 0x7fff0efd7d50 sp 0x7fff0efd7d40
WRITE of size 1 at 0x7fff0efd8710 thread T0
#0 0x402075 (/sbin/openrc-init+0x402075)
#1 0x3cf6e2070f in __libc_start_main (/lib64/libc.so.6+0x3cf6e2070f)
#2 0x4013b8 (/sbin/openrc-init+0x4013b8)
Address 0x7fff0efd8710 is located in stack of thread T0 at offset 2432 in frame
#0 0x401cfb (/sbin/openrc-init+0x401cfb)
This frame has 3 object(s):
[32, 160) 'signals'
[192, 344) 'sa'
[384, 2432) 'buf' <== Memory access at offset 2432 overflows this variable
HINT: this may be a false positive if your program uses some custom stack unwind mechanism or swapcontext
(longjmp and C++ exceptions *are* supported)
SUMMARY: AddressSanitizer: stack-buffer-overflow ??:0 ??
```
The problem here is in the code handling reads from 'init.ctl':
```
int main(int argc, char **argv) {
...
char buf[2048];
for (;;) {
/* This will block until a command is sent down the pipe... */
fifo = fopen(RC_INIT_FIFO, "r");
count = fread(buf, 1, 2048, fifo);
buf[count] = 0;
...
}
```
`buf[count] = 0;` writes outside the buffer when `fread()` returns non-truncated read.
This fixes#138.
rc-status now shows the amount of time a supervised daemon has been
active as well as the number of times it has been respawned during the
current respawn period.
This creates --respawn-delay, --respawn-max and --respawn-period. It was
suggested that it would be easier to follow if the options were
separated.
This is for #126.
Allow limiting the number of times supervise-daemon will attempt to respawn a
daemon once it has died to prevent infinite respawning. Also, set a
reasonable default limit (10 times in a 5 second period).
This is for issue #126.
openrc-init.c and openrc-shutdown.c are based on code which was written by
James Hammons <jlhamm@acm.org>, so I would like to publically
thank him for his work.
We do not need to care about the path on the shebang line of a service
script as long as the shebang line ends with "openrc-run".
This fixes#119 and #120.
The clock services had a very long list of "before" dependencies that
referred to other services within OpenRC. For ease of maintenance,
convert these to "after clock" dependencies in the individual services.
Using wildcards in dependencies causes issues when rc_parallel is set to
yes because it can lead to deadlocks.
All dependencies need to be explicit rather than implicit.
This is the first stage of moving this direction.
Since we check for /sys/firmware/efi/efivars, we do not need to check
for /sys/firmware/efi
Since Failing to mount efivarfs is not critical, we silence the error
message from mount.
My understanding is that the kernel can autoload this module. If it
doesn't, the module should be built in or loaded from an initramfs.
This fixes https://github.com/openrc/openrc/pulls/112.
- switch from attempting to ping the default gateway to a host outside
the local network, defaulting to google.com.
- along with this, change the name of the variable that requests a ping
test to include_ping_test so the meaning is more clear.
These files have been in the distribution for some time but haven't been
installed. They are good examples of how to do things, so we should
install them.
Since deptree2dot and the perl requirement are completely optional, we
can move this tool to the support folder. This gives the user the option
of using it if they have perl installed, and means we do not have an
optional runtime dependency on perl.
Documentation for this tool has also been added to the support folder.
X-Gentoo-Bug: 600742
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=600742
The test environment previously used the system default paths instead of installing the necessary $PATH environment
variable to make finding eval_ecolors work.
This closes#117.
X-Gentoo-Bug: 374191.
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=374191.
This path should not be hard coded in the open call.
Linux prior to 2.4.19 did not have /proc/self/mounts, so for now I'm
making this value /proc/mounts everywhere, but that may change to
/proc/self/mounts on linux; I'm not sure we should care about <2.4.19.
X-Gentoo-Bug: 604646
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=604646
Now that we respect the module blacklists, don't print every module we
try to load, because it might not end up loaded due to the blacklist,
and modprobe doesn't consider that a failure.
Supervisor setups break easily when start/stop/status functions are not
default.
Applications that write multiple PIDs to a pidfile (eg HAProxy as
described in bug 601540), can also benefit from being able to call the
default start/stop/status with modified environment variables.
Expose the default start/stop/status functions as
default_start/stop/status, and use them for the defaults
start/stop/status.
Trivial usage example:
```
stop()
{
t=$(mktemp)
for pid in $(cat $pidfile) ; do
echo $pid >$t
pidfile=$t default_stop
done
rm -f $t
}
```
X-Gentoo-Bug: 601540
X-Gentoo-Bug-URL: https://bugs.gentoo.org/601540
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
The /etc/init.d/localmount script has a syntax error that causes it to
attempt to mount remote filesystems, causing the boot to fail. The
script appends a "no" to each remote filesystem type, but it should only
be append the "no" to the beginning of the list. This patch fixes
localmount on FreeBSD 12.0. A review of the mount(8) manpage on Ubuntu
12.04 suggests that this patch is correct for Linux, too.
The documentation implied that if you stop a daemon we handle multiple
pids in a pid file. This is not correct. We only handle the first pid.
X-Gentoo-Bug: https://bugs.gentoo.org/show_bug.cgi?id=601540
Busybox does not support the 'scope' argument on 'ip address add' or 'ip
route add', this is documented in BUSYBOX.md, but is no longer actually
needed, as the kernel does get it right without manual specification,
and the ifconfig variant already relies on the kernel to get it right.
This is part of #103.
X-Gentoo-Bug: 487208
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=487208
Separate loading the module, if it isn't built in or loaded, from
mounting the file system.
This also makes sure the warning about configuring the module in
/etc/conf.d/modules or building it in is displayed only if it is loaded
successfully.
X-Gentoo-Bug: 595836
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=595836
This allows us to avoid the warnings from bash-4.4 about null bytes in
command substitutions.
If you have separate /usr, are not using an initramfs, and have a file
called /proc/self/environ on your root file system, this will break.
X-Gentoo-Bug: 594534
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=594534
This reverts commit 8b4fc05ff2.
The original commit did not explain why this feature was disabled, and I
now have a request to enable it.
This fixes#24.
The $RC_UNAME "Linux" had been misspelled as "linux".
As a consequence, entries in e.g. /etc/modules-load.d failed to
load any module succesfully under Linux(!)
In the hwclock, procfs and sysfs service scripts, we automatically
attempt to load the kernel modules we need before we take any action. We
shouldn't do this, because there are systems which do not use kernel
modules and do not have the kmod package installed.
With this change, we continue to load the modules ourselves, but we warn
the admin that they need to be added to /etc/conf.d/modules or built
into the kernel.
In the future, this automatic loading will be dropped.
X-Gentoo-Bug: 342313
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=342313
The original auto detection of Docker containers assumed the presence of
a container environment variable. However, Docker-1.12 does not
implement this, and I'm not sure which versions of docker implemented
it.
The new test is for the presence of a file named .dockerenv in the
root directory.
btrfs support is not implemented yet (for q Q v), but at least tmpfiles.sh
no longer chokes about tmpfiles.d lines of recent systemd versions
This fixes#87.
We had separate sysctl scripts for each operating system. However, there
is no need to do this since we can detect the operating system at
runtime with $RC_UNAME.
When we use the --utc or --localtime switch, also use --noadjfile if it
is available. This means hwclock will not use a drift file.
X-Gentoo-Bug: 584722
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=584722
1. remove default /bin:/sbin:/usr/bin:/usr/sbin
2. PKG_PREFIX should be defaulted to $(PREFIX)/usr
3. LOCAL_PREFIX should be defaulted to $(PREFIX)/usr/local
X-Gentoo-Bug:583634
X-Gentoo-Bug-URL:https://bugs.gentoo.org/show_bug.cgi?id=583634
These warnings were inserted in verbose only mode in OpenRC-0.13.A
Now, we are making them more visible in preparation for removing these
compatibility binaries in the future.
Traditional System V reserves runlevel 2 for multiuser with no
networking. We add support for this which is already defined in
the inittab as
l2:2:wait:/sbin/rc nonetwork
X-Gentoo-Bug: 533828
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=533828
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
In previous releases, we either treated no mount points as critical or
all of them.
Now both localmount and netmount support a critical_mounts setting. If
mount points listed in this setting fail to mount, localmount and
netmount will fail.
Before this commit, on Linux, we were always trying to mount file
systems marked with _netdev, even when the previous mount command
failed. Now, we do not run the second mount if the first fails.
X-Gentoo-Bug: 579876
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=579876
The read builtin in most shells will interpret backslash characters
as escapes, and they are lost when reading binfmt files line-by-line.
This causes magic strings containing backslashes to be mangled and
become invalid, resulting in erroneous 'invalid entry' messages.
The -r option to read disables special handling of backslashes and
keeps all lines intact.
X-Gentoo-Bug: 575114
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=575114
Netifrc is no longer part of OpenRC, so we shouldn't save its dep tree
as part of savecache.
This should have been removed when netifrc was split out. also, it
might be related to the following bug.
X-Gentoo-Bug: 563720
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=563720
The s6-svc syntax changed for wait-up, wait-ready, wait-down, and
wait-finished. This changes the s6 handling script to use the current
valid syntax.
This fixes#65.
The whitelist of environment variables we pass to service scripts
included several unnecessary variables.
The default whitelist now includes EERROR_QUIET, EINFO_QUIET,
IN_BACKGROUND and IN_HOTPLUG.
X-Gentoo-Bug: 569542
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=569542
In the past, OpenRC was a hybrid of a centralized and file-scope
license/copyright structure.
I followed the instructions from the Software Freedom Law Center [1] to
convert to a Centralized structure where possible, for easier future
maintenance.
[1] https://softwarefreedom.org/resources/2012/ManagingCopyrightInformation.html
add in parsing of fstab to determine if nfsclient should be automatically
started so that netmount can mount nfs without adding nfsclient
to the default runlevel
This fixes#71.
- gendepends.sh needs to read this directory to allow dependencies to be
overridden
- init.sh for Linux and Bsd need to read it to allow config settings
they use to be overridden.
These functions replace rc_sys so that we can detect containers and vms
separately.
Also, we copy file_regex() to rc-misc.c and open it to all operating
systems.
In src/rc/_usage.c, we were using bootlevel as the variable to hold the
return value of rc_sys.
This changes the variable name to systype because this function returns
a system type, not a runlevel.
These functions were never meant to be used outside of OpenRC, and they
were added when we thought we were going to do away with the automatic
detection of subsystems. Since the autodetection is not going away, we
can combine these functions into rc_sys.
The want dependency is similar to the use dependency. If a service
script, for example called service1, adds "want service2" to its depend
function, OpenRC will attempt to start service2, if it exists on the
system, when service1 is started.
However, service1 will start regardless of the status of
service2.
X-Gentoo-Bug: 406021
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=406021
Rename the rc_conf_override function to describe its purpose better,
drop one conditional compile by making it available everywhere, and move
the call to it after the optional rc.conf.d directory is processed.
This makes it possible to override settings in rc.conf by adding a
directory @SYSCONFDIR@/rc.conf.d and putting files in this directory.
The files will be processed in lexical order, and the last setting in
these files will be used.
This advises users to remove mtab from their runlevels if /etc/mtab is a
symlink, and it creates the symlink if /etc/mtab does not exist on a
system.
X-Gentoo-Bug: 560060
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=560060
We were starting the value we write to the cgroup setting file with
leading spaces and this was causing issues. This change makes sure that
we aren't adding leading spaces to the value.
X-Gentoo-Bug: 562354
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=562354
On Linux, the --netdev and --nonetdev switches were not working. They
were both returning false. After this change, they operate based on the
presence or abscence of the _netdev option in mount options.
The default start-stop-daemon start function expects the command
variable to be defined to point to the daemon we want to start.
If the variable is undefined, this means that there will be nothing to
start, and in this case we should complain because it is possible that
the script writer made a typo in the variable name.
All of the dependency type lists had the types_ prefix in their names;
this has been changed to deptypes_ to make them more self documenting.
Along the same lines, the setup_types function was renamed
setup_deptypes.
The following return codes are returned by mount -a:
0: all file systems mounted.
32: no file systems mounted.
64: some file systems mounted.
The localmount/netmount services should fail if all file systems that
should mount did not mount.
The tmpfiles "d" entry will create a full path and only the last dir in
the path will have its SELinux label set correctly. This patch will
restorecon the parents as well so that the selinux labels are correct.
eg, "d /run/libvirt/lxc", then "lxc" would have the correct SELinux
label but "libvirt" would not.
Signed-off-by: Jason Zaman <jason@perfinion.com>
This change does NOT implement btrfs subvol creation. Instead, it
treats 'v' the same as 'd', which is an acceptable fallback
according to the manual.
Fixes#58
When bash is used in posix mode for the shell, the ulimit command uses
a block size of 512 bytes for the -c and -f options.
X-Gentoo-Bug: 549238
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=549238
This changes the default s6 service directory to /var/svc.d, also
it changes the code to work with the individual services instead of
forcing a rescan when a service is started or stopped.
The original way of doing this allowed users to change the supervisor in
conf.d/*. This changes this so that the supervisor setup can be done in
the service script itself.
If a service has the same name as the runlevel it is in, openrc will
crash on changing to such runlevel. It goes in a recursive madness and
eventually gets a SEGV while in snprintf (don't know why).
This fixes two errors:
1. ls_dir stats files not with full path -> stat always returns != 0
2. ls_dir adds files to list if stat failed
This fixes#53.
X-Gentoo-Bug: 537304
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=537304
This adds the -systemd-nspawn keyword to service scripts which are not
intended to run in systemd-nspawn containers.
This fixes#52.
X-Gentoo-Bug: 548058
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=548058
The dist target now creates an archive based on the version setting.
This makes it possible to create an archive identical to the ones github
generates once the release is tagged.
This changes the mtab service in the following way:
- If /etc/mtab is a symbolic link, success is returned.
- If /etc is not writable, we warn that we could not update /etc/mtab
and return success.
- If /etc/mtab does not exist, we create a symbolic link from
/etc/mtab to /proc/self/mounts.
- Otherwise, we warn that updating /etc/mtab as a file is
deprecated and continue to update it after outputting instructions to
the user for how to move it to a symbolic link.
The cache directory should be created via mkdir -p instead of
mkdir. This makes sure all parent directories are created.
Also, we now display an error message explaining that we were unable to
create the cache directory if creation fails.
We were originally checking to see if $RC_LIBEXECDIR/cache was writable. For
a new install, this check will fail since this path does not exist. This
is also incorrect because later we create $RC_LIBEXECDIR/cache.
The correct check is checkpath -W $RC_LIBEXECDIR, and this fixes the
issue.
X-Gentoo-Bug: 544632
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=544632
This makes binfmt processing behave like tmpfiles processing which
follows the same specification as systemd.
This fixes#48.
X-Gentoo-Bug: 545162
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=545162
It appears that the only reason we were force loading the usbcore
module was to facilitate mounting usbfs. Since we no longer mount
usbfs, this is no longer necessary.
X-Gentoo-Bug: 480312
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=480312
The usbfs and usbdevfs file systems have been deprecated since
Linux-2.6.32, so we remove the code to automount them.
X-Gentoo-Bug: 480312
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=480312
The selinux file system is mounted under /sys, so move the code for it
to the appropriate service.
X-Gentoo-Bug: 546290
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=546290
Tmpfiles.d processing had /run overriding /usr/lib and /etc, but this is
not correct. The correct order, from lowest to highest, for tmpfiles
processing is:
* /usr/lib/tmpfiles.d/*.conf
* /run/tmpfiles.d/*.conf
* /etc/tmpfiles.d
This means /run/tmpfiles.d/*.conf can override /etc/tmpfiles.d/*.conf,
but /etc/tmpfiles.d/*.conf can override both of them.
This fixes#49.
The local service should use eval when it executes scripts since it has
the redirection set up in a variable.
This fixes#50.
X-Gentoo-Bug: 545012
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=545012
If selinux is disabled, then stub methods will be provided instead of
calling the real methods. This removes some warnings about unused
parameters which used to be covered up with #ifdef HAVE_SELINUX.
Signed-off-by: Jason Zaman <jason@perfinion.com>
The previous fix to --test (PR #34) prevented reading one too many
arguments when --exec -or --name was not specified, but created a
regression where the last argument would not print if either of those
arguments was specified. This corrects the issue.
Fixes#41.
checkpath -W can fail if the specified path doesn't actually exist yet.
In this case savecache script should attempt to create the path if it is
missing, however it is pre-empted by the checkpath call. This patch adds
an explicit existence test before executing checkpath.
This fixes#36.
If /tmp or / are read-only, the clean_run function can fail in some very
bad ways.
1. dir=$(mktemp -d) returns an EMPTY string on error.
2. "mount -o bind / $dir", and don't check the result of that,
3. "rm -rf $dir/run/*", which removes the REAL /run contents
4. box gets very weird from this point forward
Signed-Off-By: Robin H. Johnson <robbat2@gentoo.org>
Signed-Off-By: Chip Parker <infowolfe@gmail.com>
Reported-by: Chip Parker <infowolfe@gmail.com>
Tested-by: Chip Parker <infowolfe@gmail.com>
This is another security fix. If you use chown() or chmod() on a
symbolic link, it affects the referenced file, not the symbolic link
itself.
X-Gentoo-Bug: 540006
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=540006
The local service now redirects stdout and stderr for the scripts it
runs to /dev/null unless it is run in verbose mode.
X-Gentoo-Bug: 537444
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=537444
Do not change permissions on the target if it is a file and has multiple
hard links. This is necessary because a hard link can be an attack
vector to gain privilege escalation.
X-Gentoo-Bug: 540006
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=540006
sysfs now mounts all related sysfs file systems and returns success,
like netmount and localmount.
Also, we now check to make sure the cgroups are not mounted before we
mount them.
X-Gentoo-Bug: 530138
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=530138
runscript used to dlopen() runscript_selinux.so. This adds equivalent
functionality directly in to runscript instead. It authenticates with
either PAM or shadow and optionally has a dep on audit.
X-Gentoo-Bug: 517450
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=517450
Fixes#25
Note from William Hubbs:
The original patch overwrote CFLAGS. I modified this patch to add the
ncurses cflags to CPPFLAGS instead of overwriting CFLAGS.
Check for __FreeBSD_kernel instead of __GLIBC__ in source files.
note from William Hubbs:
I was told this is a better check for GNU/kFreeBSD than checking the
C library the source is being compiled against.
GNU/kFreeBSD than checking which library we are using.
This adds support for a chroot variable which will be passed to the
start-stop-daemon --chroot switch to runscript.sh when starting a
daemon. This also needs to be saved so it can be used in locating the
pid file when stopping the daemon.
X-Gentoo-Bug: 524388
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=524388
Fix gentoo bug #427996 correctly.
We should attempt to mount the file systems, but not try to start the
daemons. The previous fix removed mounting the file systems as well as
starting the daemons.
X-Gentoo-Bug: 508574
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=508574
Note from William Hubbs:
I spoke with Roy about this, and he pointed out that user-defined
functions may need the limits applied, so it is better to go with a
method that uses exceptions to determine which functions apply the
limits.
X-Gentoo-Bug: 522408
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=522408
Originally, we aborted all of the cgroup setup if /sys/fs/cgroup/openrc
was already mounted. This caused an issue in lxc containers, so we
should always allow the subsystems to be mounted.
X-Gentoo-Bug: 520606
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=520606
I was informed that the previous explanation of the devfs changes could
be interpreted to mean that we mount a second /dev on top of the one
that was mounted by the kernel or initramfs. This change makes it clear
that is not the case.
Device nodes are normally never device_t so this type does not
have many permissions. After the mknod, the device should have
its label corrected before any other operations (like chmod).
The clock_hctosys variable should be set to YES if you are not using NTP to
synchronize your system time; it doesn't have anything to do with the
kernel configuration.
According to the sysctl man page, the --system option causes sysctl to
process all system configuration files, which include the following:
/run/sysctl.d/*.conf
/etc/sysctl.d/*.conf
/usr/local/lib/sysctl.d/*.conf
/usr/lib/sysctl.d/*.conf
/lib/sysctl.d/*.conf
/etc/sysctl.conf
X-Gentoo-Bug: 484796
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=484796
- Rename the static_dev switch in conf.d/devfs to skip_mount_dev since
this is a better description of what the switch does.
- Clarify the error messages in the devfs service script based on the
new name of the switch.
install is in /usr which causes problems if /usr is not mounted.
Instead, checkpath and "mkdir -p" can do everything required and are
both available before /usr is mounted.
Since checkpath also handles selinux labels correctly,
_restorecon after is not required.
X-Gentoo-Bug: 503408
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=503408
The stat structure was not being initialized correctly in do_check. This
was causing the owner adjustment to be skipped if the first path had the
correct owner.
Also, the "correcting owner" message should always be printed when the
owner is being changed.
X-Gentoo-Bug: 518042
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=518042
The hwclock service should set the time zone regardless of the setting
of the clock_hctosys variable. This needs to be done to prevent issues
when the system time is being synchronized using ntp.
X-Gentoo-Bug: 434410
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=434410
Remove the recursive call in print_stacked_services which was causing an
infinite loop when using stacked runlevels.
I would like to thank Doug Freed and Jason Zaman for assisting with
tracking this down.
X-Gentoo-Bug: 514972
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=514972
The -W option does not need an argument of its own; it can take the
first path after all other options are processed on the command line.
Also, move the processing for the -W option out of the switch so it will
be in the same loop as the other processing.
Before this commit, not specifying -d, -f, -p or -W in a checkpath
command meant the command exited successfully but actually did nothing.
This is an error condition, so report it as such.
Status call should not set limits as it requires root permissions,
also this is not safe, as current process may reach limitation.
Solution is to set limits and move process to service cgroup only
on start.
X-GENTOO-BUG: 500364
X-GENTOO-BUG-URL: https://bugs.gentoo.org/show_bug.cgi?id=500364
- remove the has_executables variable since it isn't used.
- Convert the conditional calls to ewend/vewend to a single call to veend.
- Always call eend after all scripts are executed passing the appropriate
error code.
Because of this change, you will see only an overall status when
starting or stopping local unless you are using verbose mode.
With this patch, the "local" service runscript will be verbose like the
"sysctl" service when 'rc_verbose="yes"' is set.
Example output successful start:
* Stopping local ...
* Executing "/etc/local.d/00will-stop.stop" ... [ ok ]
* Starting local ...
* Executing "/etc/local.d/00will-start.start" ... [ ok ]
* Executing "/etc/local.d/01 test.start" ... [ ok ]
Example output with failing executables:
* Stopping local ...
* Executing "/etc/local.d/00will-stop.stop" ... [ ok ]
* Executing "/etc/local.d/will-fail.stop" ...
mount: can't find foo in /etc/fstab
* Execution of "/etc/local.d/will-fail.stop" failed. [ !! ]
* Starting local ...
* Executing "/etc/local.d/00will-start.start" ... [ ok ]
* Executing "/etc/local.d/01 test.start" ... [ ok ]
* Executing "/etc/local.d/will-fail2.start" ...
mount: can't find bar in /etc/fstab
* Execution of "/etc/local.d/will-fail2.start" failed. [ !! ]
* Executing "/etc/local.d/will-fail.start" ...
mount: can't find foo in /etc/fstab
* Execution of "/etc/local.d/will-fail.start" failed. [ !! ]
X-Gentoo-Bug: 489274
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=489274
We were not checking to see if /sys/fs/cgroup/openrc was already mounted
before we mounted it. This fixes that issue.
Thanks to Robin Johnson <robbat2@gentoo.org> for pointing this out.
Move the additional history information from Daniel Robbins' wiki
page along with the history from README to a separate file,
README.history.
X-Gentoo-Bug: 513024
X-Gentoo-Bug-URL: https://bugs.gentoo.org/513024
The SELinux filesystem has been moved to /sys/fs/selinux for quite some
time. We kept supporting /selinux for backwards compatibility, but it's
time to move forward on this.
X-Gentoo-Bug: 511718
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=511718
Signed-off-by: Sven Vermeulen <sven.vermeulen@siphos.be>
As the author of our tmpfiles.sh script, I hereby license it under
2-clause BSD, like the rest of openrc.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Thanks to info and testing done by Daniel Robbins <drobbins@funtoo.org>,
there is now a fix for this. Below is his description of the steps
OpenRC needed to use.
1) See if /proc/<pid>/status exists
2) If it does, see if it has a "envID:" field
3) If it does, see if "envID:" is set to "0"
4) If so, then it's one of the host's processes and should be a
candidate for the list. Otherwise, it is one of the container's
processes and should be ignored.
This should fix the bug and allow start-stop-daemon to work properly on
OpenVZ hosts.
X-Gentoo-Bug: 376817
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=376817
The current code relies on the tmpfs mount defaulting to 1777
permissions. If it doesn't, things break badly.
This can come up when tmpfs is disabled in the kernel and ramfs
is being used instead (the kernel will alias tmpfs to ramfs).
The default permissions for ramfs is 0755.
- Remove the netifrc related items since netifrc is now a separate
package.
- State that the features we are planning to remove will be removed
in version 1.0.
- Clarify the last entry; we are refering to start-stop-daemon options.
The mount and remount options should always be processed. They were only
being processed if -q was not on the command line.
X-Gentoo-Bug: 498206
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=498206
The -a option,which only applies to the del command, is used to remove a
service from all runlevels.
X-Gentoo-Bug: 497740
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=497740
This code is no longer part of the initialization script for Linux, so
we can move it into the init script for *BSD which is the only place it
is used.
A comment in this file had the actual currency and euro symbols, which
were not utf-8, so I was requested to remove them.
X-Gentoo-Bug: 494936
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=494936
Add documentation for the RC_SERVICE, RC_GOINGDOWN, RC_LIBEXECDIR and
RC_NO_UMOUNTS environment variables.
X-Gentoo-Bug: 489344
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=489344
All Linux systems need /dev to be set up,so add code to devfs to do
this. The process devfs follows is below.
1. If static_dev is yes, nothing is done.
2. if /dev is an entry in fstab it is mounted or remounted based on that
entry.
3. If /dev is not in fstab, it attempts to mount /dev as a devtmpfs or
tmpfs depending on which is defined in the kernel; devtmpfs is
preferred.
4. If neither devtmpfs nor tmpfs is defined, it assumes the user wants
static /dev and prints a warning.
X-Gentoo-Bug: 492694
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=492694
This was requested by Debian, because the minicom software, which is
available on Debian and other distros, has a binary named runscript. We
are keeping a backward compatibility symlink for now, but this allows
Debian or any other distro to safely remove the symlink.
X-Gentoo-Bug: 494220
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=494220
The message about a service being scheduled to start was confusing to
some of our users; I was told this wording is more clear.
X-Gentoo-Bug: 493070
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=493070
Debian requested this rename due to the "rc" binary conflicting with the
"rc" binary from the plan 9 shell.
We also add a deprecation warning to the binary when it is run as rc to
encourage users to switch to openrc instead.
X-Gentoo-Bug: 493958
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=493958
Bootmisc was running before the root file system was remounted rw in
some situations. This fixes that issue.
X-Gentoo-Bug: 493442
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=493442
The loopback interface is supposed to be handled by the loopback
service, but sys_interfaces includes it. This causes network to try to
start it and means that network provides net even if lo is the only
interface configured.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
The posix equivalent of the type command is "command -v", so now we use
that. Thanks to Jonathan Callen <jcallen@gentoo.org> for informing me
wrt the fix.
This commit fixes the rc_verbose setting so that it is honored if it is
set for an individual service.
Thanks to whissi@whissi.de for the original patch; this one is slightly
modified to be more posix.
X-Gentoo-Bug: 489358
X-Gentoo-Bug: https://bugs.gentoo.org/show_bug.cgi?id=489358
The rc_runlevel_exists function was attempting to treat "." and ".." as
valid runlevels; however, this should not be allowed.
X-Gentoo-Bug: 488710
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=488710
The localmount and mount-ro scripts were flushing pending disk writes by
calling sync twice in succession. This is no longer necessary; see the
bug report and blog post for reasons we were still doing this.
Reported-by: Patrick Lauer <patrick@gentoo.org>
X-Gentoo-Bug: 487382
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=487382
Convert these messages to warnings that are only displayed if
EINFO_VERBOSE is set to yes in the environment.
This is based on a suggestion from Patrick Lauer <patrick@gentoo.org>.
X-Gentoo-Bug: 487588
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=487588
Several calls to do_stop were forcing the test parameter to be true,
which was causing extra output to the terminal, such as:
* Would send signal 0 to pid xxxxx
This should only happen if the --test command line option was used.
We should first check if we are within bounds and then read rather than
the opposite.
This makes valgrind happy.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
The eerror calls in this function make it too verbose, so change them to
ewarnv() calls instead. This means that they will only print if the
--verbose option is used or EINFO_VERBOSE=yes is set in the environment.
The yesno test for rc_cgroup_cleanup belongs at the point where this
function is called from runscript, not in the function itself.
X-Gentoo-Bug: 486210
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=486210
The libeinfo library has no consumers other than OpenRC, so there is no
reason for it to be maintained as a library. The einfo routines are now
an object that links with the rc binary.
Along the same lines as the quiet variable, this is controlled by an
environment variable for the einfo code, so we do not need a separate
boolean flag.
The suppression of output is controlled in the e* functions themselves,
so there is no need for a variable to test in start-stop-daemon.
X-Gentoo-Bug: 482396
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=482396
Patch was provided by Max Hacking <max.gentoo.bugzilla@hacking.co.uk>
and slightly fixed by Alexander Vershilov <qnikst@gentoo.org> and
William Hubbs <williamh@gentoo.org>.
Fixes:
1). Rebase to newest OpenRC version.
2). Remove code style fixes. Port to currect code style.
3). Fix rc_runlevel_stack instead of introducing new function.
4). Make get_runlevel_chain a private function.
X-Gentoo-Bug: 467368
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=467368
Add an EERROR_QUIET environment variable which works like EINFO_QUIET
but for the eerror functions. This will allow library consumers to
choose whether to suppress eerror messages separately from einfo and
ewarn messages.
X-Gentoo-Bug: 482396
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=482396
This makes the eerror* functions honor the EINFO_QUIET environment
variable like the einfo* and ewarn* functions.
X-Gentoo-Bug: 482396
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=482396
This reverts commit 4ee62c7903.
The previously referenced commit broke consistency because ewarnx() was
respecting the EINFO_QUIET environment setting, but after this commit,
ewarn() was not.
Also, due to discussion on the below referenced bugs, I think we do
want to suppress warnings when EINFO_QUIET=yes.
X-Gentoo-Bug: 482396
X-Gentoo-Bug: 439174
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=482396
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=439174
The einfo() function tests for the EINFO_QUIET environment variable
directly, and this is the variable that is set by the --quiet flag, so
there was no reason for this test to exist.
The example code had an invalid checkpath option (--dir instead of
--directory) and a mode that does not make sense for directories (664
instead of 775).
X-Gentoo-Bug: 481034
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=481034
It has been determined that it will be best for gentoo's net.* scripts
to be in a separate package to allow independent development.
This package will be called netifrc and maintained by Gentoo.
Restart has never been able to be overridden in OpenRc, but there is a
way to make your service script behave differently when restart is being
executed.
X-Gentoo-Bug: 480866
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=480866
This change will fix unwanted cgroup inheriting from user cgroups,
and fixes issues with systemd cgroup tracking by logind.
However this fix can lead to incorrect work for some user cgroup
controllers - so more advanced solution, that coveres such cases
will be created later.
Thanks to Fabio Erculiani (lxnay) for testing and general idea.
The systemd cgroup hierarchy support is being added so we can run
logind outside of systemd. This is needed because software that was
using consolekit is now migrating to logind.
We do not create this hierarchy, we just add services to it if it
exists.
In the 3.10 kernel, EFI variables are now provided by a dedicated
filesystem that needs to be mounted.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
In the 3.10 kernel, EFI variables are now provided by a dedicated
filesystem that needs to be mounted.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Most of the time, setfont is an external command (part of the kbd
package), but it can also be a builtin if busybox is being used. This
corrects the test in early startup to work for both cases. I would like
to thank Steve L. for pointing this out.
OpenRC, by default, stops all services that are not listed in a runlevel
when rc is used to switch runlevels. This adds a -n/--no-stop command
line option to rc which tells it to skip stopping the services which are
not in the runlevel.
Reported-by: gentoo@thoth.purplefrog.com
X-Gentoo-Bug: 372585
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=372585
The /proc/1/environ contains various \0 terminated strings. The current
code will only work when the search string is in the first of those.
To fix this we look for strings in entire buffer.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
This script originally tested the file system type for the source
location of the data we were migrating to determine if the migration was
complete. Now we test the destination, and if the softlevel file is
there the migration was successful.
Reported-by: Piotr Karbowski <piotr.karbowski@gmail.com>
Explain that virtual services take precedence over real services and
recommend that virtual services have different names from real services.
Reported-by: me@2gw.net
X-Gentoo-Bug: 461818
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=461818
This avoids situations in which fuser hangs because of open files on
remote file systems when the remote system goes down.
I have also passed this bug on to the maintainers of psmisc since it
should really be fixed in fuser.
This is based on a patch submitted by evermind@tuxfamily.org
Reported-by: evermind@tuxfamily.org
X-Gentoo-Bug: 455458
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=455458
tmpfiles now has a new line type, X, which is similar to the x line type
used by the cleanup function.
This is not supported yet by OpenRc, because we do not have the cleanup
function in tmpfiles.sh, so I have added a dummy procedure for it so
we don't get complaints about this line type.
Reported-by: mgorny@gentoo.org
X-Gentoo-Bug: 460880
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=460880
Free BSD's ifconfig outputs a netmask in the form 0xffffff00, which
was translating to 0xff.0xff.0xff.0x00,. Now we convert this to decimal
numbers before we convert it to cidr notation.
Reported-by: 4glitch@gmail.com
X-Gentoo-Bug: 460268
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=460268
The old message did not indicate that the runlevel argument was optional
for add and del or that it could be used with show.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
SBINDIR and BINDIR can be set independently of PREFIX. This fixes
broken shebangs in service files when SBINDIR is set to something other
than PREFIX/sbin
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
BINDIR and SBINDIR can be set independently of PREFIX and may not be set
to PREFIX/bin as scripts currently assume.
Note from William Hubbs:
This adds @BINDIR@ and @SBINDIR@ macros to the sed commands run to
convert *.in files to the executable form.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
BINDIR was pointing to PREFIX/sbin which was confusing and inconsistent
with src/rc/Makefile. Add SBINDIR and redefine BINDIR appropriately.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
If ncurses was built with the --with-termlib switch enabled, tgoto, tgetent
and tgetstr move to libtinfo. Fortunately, ncurses provides a pkg-config
file which we can use if pkg-config is installed. If it is not, we still
link to -lncurses for now, so pkg-config is not a hard requirement.
Reported-by: jan.paesmans@gmail.com
X-Gentoo-Bug: 455912
X-Gentoo-Bug: https://bugs.gentoo.org/show_bug.cgi?id=455912
This reworks cgroups support so we have one variable in rc.conf for each
controller instead of each setting.
Also we add support for all of the possible cgroup controllers.
I would like to thank Alexander Vershilov for his help with testing and
reworking this code.
This makes binfmt.d consistent with tmpfiles.d and systemd which uses
hard coded paths for both.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Certain services were not being enabled by default if PREFIX was set.
This appears to have been intended for Gentoo Prefix systems which are
indicated by MKPREFIX not PREFIX.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Fixes hardcoded paths that break when built with SYSCONFDIR
set to anything other than /etc/
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Using setfont directly to save the font prevents breakage
when a distro stores consolefonts in a location other than
/usr/share/consolefonts such as Arch which stores them in
/usr/share/kbd/consolefonts
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
sh/rc-cgroup.sh.in: new script to handle cgroup processing
sh/rc-cgroup.sh.in: do not use grep or cut (modification by William Hubbs)
sh/runscript.sh.in: use the cgroup script
The loadkeys man page states that if you don't pass a filename loadkeys
will read from stdin. However, this is not correct, so we now pass "-"
as the filename to explicitly request stdin.
Reported-by: andi@grois.info
X-Gentoo-Bug: 457524
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=457524
We were telling users that setting shutdown_network=YES would shut down
the network interfaces during shutdown, but this was exactly the
opposite of what we were doing. The default was YES, which was keeping
the interfaces active.
This keeps the default behavior, but renames the setting to keep_network
which more accurately describes its function, and instructs users to set
it to NO if they want the network interfaces to go down.
This setting, already in use in newnet, allows the user to control
whether network interfaces are stopped when the system shuts down. By
default, under newnet, they are not, so I am making oldnet have the same
default.
A side-affect of this is that in the default configuration this fixes
bugs like the one below.
Reported-by: jerryfleming2006@gmail.com
X-Gentoo-Bug: 259183
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=259183
rkhunter thinks OpenRC is a rootkit because of the hidefirstrout
variable. This has been renamed to hideFirstroute in order to get past
rkhunter.
I realize this is not an openrc bug. In this case though I do not have a
problem renaming the variable.
Reported-by: ago@gentoo.org
X-Gentoo-Bug: 339714
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=339714
The /run directory is a mount point for a tmpfs and should not contain
any files or directories. This cleans out the /run/openrc
symlink and any other files which were incorrectly placed in /run.
Thanks to Ian Stakenvicius for pointing out this solution.
If an init script or service was upgraded while it was running and the
settings for the pid file, command and process name were changed, it
would not be possible to stop the old service.
Runscript now saves the values it used to start the service and re-uses
them to stop the service.
Reported-by: flameeyes@gentoo.org
X-Gentoo-Bug: 434032
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=434032
This directory will contain tools which are not necessary for OpenRC to
run, but which some users have found useful.
The first of these is deptree2dot, which converts /run/openrc/deptree to
a .dot file for use with graphviz. This can assist in finding circular
dependencies.
miimon & mode must be set before other parameters, and then not changed
again. Prior commit f671e0a28 per bug #421757 introduced a small logic
error. Fixed & refactored to prevent it happening as easily.
X-Gentoo-Bug: 447790
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=447790
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
In order to make migration from /lib*/rc/init.d to /run/openrc possible
without rebooting, the migration script creates a symlink from
/run/openrc to /lib*/rc/init.d. We were trying to remove it on the next
reboot, but this is not possible since / is ro when /run is mounted.
Reported-by: fturco@fastmail.fm
X-Gentoo-Bug: 447678
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=447678
For devices that are always connected (e.g. ethernet cards), the current
carrier always wastes time by sleeping for 1 second. This is because the
code sleeps first, then checks for carrier. Invert the order so that we
return quickly for devices already active. For devices which are not yet
up, there shouldn't be any real difference.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This doesn't affect us on gentoo, but on archlinux, which has done the
/usr merge, OpenRC was looking for /run under PREFIX. /run is always at
the root level, so it shouldn't have prefix appended to it.
Reported-by: udeved@openrc4arch.site40.net
Currently, we have the net virtual, so we should use it as the default
in this instance so that netmount comes up after it thinks the network
is up. However, this is technically eroneous, because there is no way to
know from the init system that we really have network connectivity.
Reported-by: cheepeero@gmx.net
X-Gentoo-Bug: 445116
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=445116
Add a test when localmount is started to determine if /usr is mounted
from inside an initramfs for Linux systems. If it is not, we can unmount it when
localmount stops.
On *bsd systems, we always unmount /usr if it is separate.
Reported-by: ryao@gentoo.org
This commit was modified by William Hubbs as follows:
- The paths in the cgroup fs were put into variables to ease
maintenance.
- Documentation was added to rc.conf.Linux.
- The services were added originally to openrc/svcname cgroups under the
controller cgroups, but this left an "openrc" cgroup which was unused.
Now they are added to individual cgroups with the name openrc_${RC_SVCNAME}.
In a pathname expansion, specifically single-character match, the pure
POSIX specification uses '!' as the Negation character where a regular
expression would normally be '^'.
Regular expression: "a[^a]a"
Pathname expansion pattern: "a[!a]a"
Reference:
IEEE Std 1003.1, 2004 Edition
2. Shell Command Language
2.13 Pattern Matching Notation
2.13.1 Patterns Matching a Single Character
> The description of basic regular expression bracket expressions in the
> Base Definitions volume of IEEE Std 1003.1-2001, Section 9.3.5, RE
> Bracket Expression shall also apply to the pattern bracket expression,
> except that the exclamation mark character ( '!' ) shall replace the
> circumflex character ( '^' ) in its role in a "non-matching list" in
> the regular expression notation. A bracket expression starting with an
> unquoted circumflex character produces unspecified results.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
I have learned that it is better to increment the version early. This
way keeps track of the version that is being worked on on the branch and
the tag marks when the release actually happens.
Initially, we were creating tmpfiles entries in the sysinit runlevel and
again in the boot runlevel. Systemd runs the --create and --remove
options in one service called systemd-tmpfiles-setup after the local
file systems are mounted. Now we have a service called tmpfiles.setup
which emulates this.
This also closes the bug mentioned below, since we were originally
writing to files that were on read-only file systems and that were not
available.
Reported-by: <devurandom@gmx.net>
X-Gentoo-Bug: 439012
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=439012
The original documentation for these variables did not give an example
of what to do if the service had a name that had illegal characters in
it, so this commit adds an example. There was no bug report; this was
suggested by Tobias Klausmann.
Checkpath was printing the path it was working with unless it was
correcting the owner. In this case, it was printing "checkpath", which
is not very useful.
Reported-by: <devurandom@gmx.net>
X-Gentoo-Bug: 439014
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=439014
Previously, we were setting the quiet flag before the command line was
parsed. Since the flag is only used once, we can just read the
environment variable which is set by the parsing process.
Reported-by: <devurandom@gmx.net>
X-Gentoo-Bug: 439010
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=439010
systemd allows the final arg in tmpfiles to contain spaces. Using the read()
call to set the variables includes all trailing components in $arg so it
doesn't get cut off.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
'[ -n "$arg" ] && _w' causes _f/_F to return the failure from the test when
$arg is empty. Inverting the test causes the test and _f/_F to return success.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
There were references in the devfs script to mdev, udev and
udev-mount. These all provide the virtuals dev and dev-mount; that is
how we should refer to them.
I believe in the discussion I had with Tony and Robin about this, we
were going to change the "use" line to "need". However, after thinking
that over, I'm not comfortable doing so because someone could be running
a static /dev with no device manager.
Reported-by: <tokiclover@gmail.com>
X-Gentoo-Bug: 438932
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=438932
When the test suite is being run, we need our local directories in PATH
and LD_LIBRARY_PATH before the system directories. This makes sure we
run our tests using the currently built tree.
We should use the "command" shell builtin to execute a binary from
within the wrapper with the same name. Hard coding the path to the
binary makes our test suite fail.
If sysfs is not available, you might still be able to create bond
interfaces, but only in very specific configurations, and you must have
the ifenslave binary instead to call ioctls.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
If the kernel is NFS-booting, it is critical that we don't down the
slave interfaces when we activate the bond. To do so will break the root
filesystem when networking is temporarily lost.
Reported-by: Walter <walter@pratyeka.org>
X-Gentoo-Bug: 428604
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=428604
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
runlevels/Makefile currently uses ${PREFIX} when creating the initial
runlevel symlinks, but the init files are installed to ${INITDIR},
which results in broken symlinks if ${SYSCONFDIR} is set to something
other than ${PREFIX}/etc
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Gentoo adds a "-k" option to the reboot command in inittab. This is a
Gentoo-specific option, so it is being removed.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
This is needed because the network script uses this variable in the
depend() function but it wasn't exported when this was run.
Reported-by: <aaly90@gmail.com>
Now that the tmpfiles.d code is more tested, actually call it from
init.d. It assumes that /run is already available when it runs.
Please note it runs TWICE.
- During sysinit, ideally just after /dev/shm is created, but before
udev has started. After udev is also acceptable, but not ideal.
- During boot, ideally just after localmount has completed.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Using the new dev-mount virtual, with udev-mount included until new udev
version is rolled out, we run devfs earlier now, before udev/mdev.
It only needs (u)dev-mount before it, so that /dev is mounted.
This opens the way for tmpfiles.d, which needs to be sandwiched in the
middle.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
net.* and module loading require sysfs now, and if udev is not in use,
it is not always loaded early enough, esp for net.lo. Force it to come
up during sysinit instead.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
By design, restart is hard coded to run stop followed by start along
with all of the pre/post functions associated with them. Restart doesn't
need its own pre/post functions since it is possible to make any
function in an init script behave differently for a restart command by
testing against the RC_CMD environment variable.
The Gentoo developer manual covers how to handle restarts in init
scripts, but this was not officially covered in OpenRc's Documentation.
This commit adds an example to the runscript man page that shows how
this works.
On prefix systems, RC_SVCDIR was being defined based on the host
operating system. This is not correct because there will not be a /run
directory in a prefix.
This commit moves RC_SVCDIR on prefix systems to the same location as on
non-Linux systems.
Since nfs and nfs4 file systems require extra daemons to be running on
the client to function properly, netmount should not try to handle these
file systems.
Reported-by: <devurandom@gmx.net>
X-Gentoo-Bug: 427996
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=427996
The OpenRC upstream default network stack was changed, but there was no
reason to change it. Now since we have the MKNET build switch, it is
easy for the gentoo ebuild to install oldnet by default.
The upstream default is newnet.
The MKNET variable can be used to select the network stack you want to
build and install with OpenRC.
The current default is the gentoo "oldnet" stack. If you want to install
the OpenRC newnet stack, use MKNET=newnet on the make command line.
This reverts commit 5994e55937.
There are situations where these scripts can be useful, so I am bringing
them back. Also, I want to start discussions about simplifying the
OpenRC network stack.
Mount can't be used in vservers, but /run is still needed. So we create
the directory and clear it out instead of mounting a tmpfs in that
situation.
reported-by: <patrick@gentoo.org>
X-Gentoo-Bug: 423739
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=423739
We want to lookup the service based on the applet name.
Reported-by: Christian Ruppert <idl0r@gentoo.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
If you are not using linux, this should not affect you.
If you are using linux, from this point forward, openrc requires the
/run directory to be a mounted tmpfs. If it is, you can run
@LIBEXECDIR@/sh/migrate-to-run.sh as root to migrate your dependency
tree and state information to the new location. If it is not, you must
create the /run directory as root with permissions 755 then reboot your
system.
reported-by: Maxim Kammerer <mk@dee.su>
X-Gentoo-Bug: 401059
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=401059
Many of these helpers are not special to librc, so split them out so they
can be used in all source trees (including libeinfo).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This message was being taken by some users as an error, so I have
removed the part about "skipping..." Hopefully this will make the
message less alarming.
There were a couple of places where we were sourcing functions.sh in
@SYSCONFDIR@/init.d. This is only a backward compatibility symlink, so
it should not be used for openrc. The correct place to source this from
is @LIBEXECDIR@/sh.
We already have a special case for depend processing, so we should
change the working directory there only. This prevents us from forcing
all init scripts to be run in the init directory.
Enter the service directory, like gendeps.sh does, to make sure globs are
expanded in it rather than in /. That makes sure that globbing like "need *"
will end up in all files of the init.d directory.
Signed-off-by: Christian Ruppert <idl0r@gentoo.org>
Reported-by: Guenther Brunthaler <gb_about_gnu@gmx.net>
X-Gentoo-Bug: 412677
X-Gentoo-Bug-URL: https://bugs.gentoo.org/412677
Caused by bug 412589 I was looking at the do_mark_service() function and quickly
found that the segfault is caused by a strlen() call against a NULL pointer.
I also noticed it's using "/exclusive/%s.%s" so svcname.pid, all other functions
are just using the svcname.. So it seems that svcname.pid was/is never used and
thus not necessary at all.
In relation to the above, the if statement in the do_mark_service() function
("if (ok && svcname && strcmp(svcname, service) == 0) {") needs to be
fixed/improved as svcname and service are almost always equal, see my comment in
the function for further details.
Signed-off-by: Christian Ruppert <idl0r@gentoo.org>
Reported-by: Patrick McLean <chutzpah@gentoo.org>
X-Gentoo-Bug: 412589
X-Gentoo-Bug-URL: https://bugs.gentoo.org/412589
sysfs needs to be available before we can check interfaces. On udev
systems this was not a problem, but with mdev/static-dev, there is no
other need for sysfs until later in the init.
X-Gentoo-Bug: 410701
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=410701
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
On linux systems running >=linux-3.2, the /proc/net/dev file cannot be
relied on to show the order network interfaces were added to the system.
Also, there is currently a bug in the implementation of the seek call
for this file which can cause a system to go into an infinite loop.
This commit changes the _ifindex function to retreive the value of
/sys/class/net/${IFACE}/ifindex and use that value instead of attempting
to calculate one from the interface's position in /proc/net/dev.
reported-by: John Keeping <john.keeping@lineone.net>
X-Gentoo-Bug: 410127
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=410127
On linux systems, fsck was not taking into account which filesystems
were local or remote. This commit adds the -t option, with an
appropriate value, to the fsck call so that remote file systems are not
checked.
reported-by: Vladimir Berezhnoy <non7top@gmail.com>
X-Gentoo-Bug: 408363
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=408363
The -q option is not implemented by BusyBox, so instead of using that, make
it so that the standard error is caught, but standard output is thrown
away.
Note: the ordered behaviour of redirection is part of POSIX so we should be
on the safe side with this change, as first we duplicate the output
descriptor to be used as stderr, then we change the output descriptor to
point to NULL.
Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu>
In most cases, changing the MAC on a bond manually is wrong. The bonding
module will do it as needed to failover between interfaces, or to get
multiple interfaces to correctly have the same MAC.
We cannot however enforce it, as there are some corner cases where it is
actually valid (hardware that requires specific MAC configuration, like
some quad-port NICs).
Suggested-by: Martin Mokrejs <mmokrejs@fold.natur.cuni.cz>
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
The newer bonding code using sysfs does not clearly show the most common
bond parameter: mode
Also include a path to the referenced kernel documentation for the other
settings.
X-Gentoo-Bug: 408333
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=408333
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Upstream has clarified via IRC:
- hardcoding /usr/lib/ is an explicit choice. It should NOT consider
$libdir at all.
- The z/Z relabel types should call restorecon, not chcon.
- Whitespace is not allowed in tmpfiles.d/*.conf path entries,
but is allowed in globs results. Fixed quoting of path arguments for
this.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
This is the baseline support for tmpfiles.d.
Still missing:
- SELinux relabel, pending upstream clarification
- LIBDIR vs multilib systems, pending upstream clarification
- Whitespace in paths?
- Clean support not implemented
- "x" exclude type not implemented
X-Gentoo-Bug: 396003
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=396003
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
The location of the ifconfig binary has changed in
net-tools-1.60_p20120127084908, and if we do not check both locations
for it, the user will get errors like:
_is_wireless: command not found
_exists: command not found
X-Gentoo-Bug: 407757
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=407757
The commands defined in the extra_commands variable do not depend on
whether the service is stopped or started, so it is valid to run them in
chroot environments.
Also, add a note to the runscript man page about the commands in
extra_commands being able to run whether or not the service is started.
Reported-by: Robin Johnson <robbat2@gentoo.org>
X-Gentoo-Bug: 406713
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=406713
This looks up an option on the kernel command line. For now, itworks on
linux and returns NULL on the bsds, but we are definitely open to
patches for that side.
This reverts commit 06d6701785.
After researching this further, we do need this commit. The other issue
is a bug in fstabinfo which will also need to be fixed.
There are several reasons for going back to this:
- fstabinfo doesn't work with labels in fstab
- when a device is passed to swapon individually, the swap priority from
fstab is not honored.
- We also add the -e option to only activate available swap devices.
reported-by: Duncan <1i5t5.duncan@cox.net>
X-Gentoo-Bug: 405021
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=405021
The network script had a separate case for handling network interface
dependencies using variables of the form
rc_before/after/use/need/provide_ifname. This is unnecessary since
openrc already supports rc_net_ifname_need/use/before/after/provide.
This commit updates the documentation to use this more generally
supported form.
I was informed that "provide net" should mean that there is network
communication outside the local computer. In this case, the loopback
interface can't "provide net", but there needs to be a way for other
processes to know that the loopback interface is active.
To this end, this commit makes the loopback "provide lo" and all other
interfaces "provide net".
Previously, the default on linux systems was to not set the hardware
clock to match the system clock during shutdown.
This changes that default to be consistent with *bsd and swclock.
The clock_hctosys and clock_systohc settings really do not have anything
to do with running an ntp daemon, so remove that reference from the
documentation.
Reported-by: Milos Ivanovic <milosivanovic@orcon.net.nz>
X-Gentoo-Bug: 401433
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=401433
Modify the swap script so it starts before and stops after localmount.
Also, on linux, this script should skip mounting swap on loopback.
Add a swapfiles script which runs after localmount and is designed to
activate additional swap space which could not be activated before
localmount was run. This includes loopback swap on linux and swapfiles
which are on local file systems that were not mounted when swap was
activated initially.
The start code does reactivate swap that is already active, but this is
not an error condition.
Reported-by: Giampaolo Tomassoni <giampaolo@tomassoni.biz>
X-Gentoo-Bug: 401003
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=401003
This allows root to be removed from the boot runlevel which is needed
sometimes when the root fs is mounted read-only.
Reported-By: Maxim Kammerer <mk@dee.su>
X-Gentoo-Bug: 400921
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=400921
During early boot, the keywords were not being checked for
consolefont/termencoding and they were running anyway when they should
not be.
X-Gentoo-Bug: 400549
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=400549
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Our sysctl script has read from /etc/sysctl.d/ but the directory was not
created by default, and we didn't document it.
X-Gentoo-Bug: 398189
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=398189
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
This was modified by William Hubbs to use the checkpath helper and to
improve readability.
Signed-off-by: William Hubbs <williamh@gentoo.org>
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
(tested with genkernel /usr mount changes);
This adds a --remount/-R option to fstabinfo. This new option works like
--mount, but it adds the necessary options to remount a file system
that is already mounted.
Reported-by: Piotr Karbowski <piotr.karbowski@gmail.com>
X-Gentoo-Bug: 401573
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=401573
Openrc was quietly loading this file if it existed and this was causing
some issues, so now openrc loads the file and complains about it.
Hopefully the warning message will convince everyone to remove this file
and migrate the settings to @SYSCONFDIR@/rc.conf where they belong.
This reverts commit 6d5a2d5f9e.
There are interfaces, such as adsl and ppp interfaces which need to be
brought down. Also, the WOL setting is a good case for bringingdown
interfaces.
Also ignore errors in case of EROFS (Read-Only file systems)
Reported-by: Maxim Kammerer
X-Gentoo-Bug: 401115
X-Gentoo-Bug-URL: https://bugs.gentoo.org/401115
There's no need to loop until flock was successfully as flock() would simply
block till a previous lock has been released.
There's more to do to fix it properly, see my comments in the patch.
Reported-by: James Le Cuirot <chewi@aura-online.co.uk>
X-Gentoo-Bug: 360013
X-Gentoo-Bug-URL: https://bugs.gentoo.org/360013
This is based on a patch submitted by the reporter; however, there was
another mount command which needed -n as well so it was added to the
patch.
Reported-by: Ben Kohler <bkohler@gmail.com>
X-Gentoo-Bug: 400967
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=400967
Checkpath -W will use access(3p) to determine whether or not a path is
writable. This is more accurate than test(1p) because it also takes into
account whether or not the filesystem is mounted read-only.
Modified by William Hubbs to add the man page update.
Baselayout-1.x used to have a DELAYLOGIN option where it would setup
/etc/nologin automatically and then delete it later on. OpenRC did
not keep that feature, and during the rewrites, ended up just punting
it all the time. This isn't what we intended, so drop the rm.
X-Gentoo-Bug: 400837
X-Gentoo-Bug-URL: https://bugs.gentoo.org/400837
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
The previous bonding change of ensuring interfaces were down to add
slave interfaces, but it clobbered the IFACE variable, because it was
being passed to a bash function rather than a command.
X-Gentoo-Bug: 400613
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=400613
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
The following information is taken from the feature_test_macros man
page:
<features.h> is a Linux/glibc-specific header file. Other systems have
an analogous file, but typically with a different name. This header
file is automatically included by other header files as required: it is
not necessary to explicitly include it in order to employ feature test
macros.
Reported-by: Tibor Vago <tibor.vago@gmail.com>
X-Gentoo-Bug: 399635
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=399635
The start-stop-daemon "--make-pidfile" option is now used by default when using
command_background, this requires a pidfile to be specified.
Document command_background option.
Reported-by: Giampaolo Tomassoni <giampaolo@tomassoni.biz>
X-Gentoo-Bug: 399165
X-Gentoo-Bug-URL: https://bugs.gentoo.org/399165
This adds a new function that allows us to override some specific rc.conf
options via the kernel cmdline aka /proc/cmdline.
This makes esp. sense in cases where a rc_parallel enabled system has boot
issues. Simply disable rc_parallel by appending rc_parallel=no to your kernel
cmdline.
In the case of a single line of configuration, where the address has
parameters, the parameters were being treated as seperate addresses.
Eg:
config_eth0="4321:0:1:2:3:4:567:89ab/64 nodad home preferred_lft 0"
Also document usage of parameters in the net example, and note that
multiple addresses on a single line cannot be mixed with parameters.
Newlines are required to seperate the addresses.
X-Gentoo-Bug: 398827
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=398827
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
This commit provides the checkpath applet with feature parity to
systemd's tmpfiles.c create_item function.
Very similarly to the systemd function, it does NOT do any of the
cleanup work in this function.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
The program function in depend blocks is now able to search paths by
itself. If passed multiple arguments or multiple calls, at least one of
the arguments passed must be a program or a shell builtin (eg ip built
into busybox). If a qualified path is specified, only that path will be
checked, otherwise it will be checked as a builtin, then $PATH will be
checked for the named binary (via type).
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Some of the networking tools, such as iproute2, can be stored in one of
several locations. This function gives us a standard way to find these
tools.
I would like to thankRobin Johnson <robbat2@gentoo.org> for his input on
this function.
The old behaviour was to exit(EXIT_SUCCESS) in case the service has been stopped
already, even if further commands has been passed to the init script
(like zap, start).
So using for example /etc/init.d/foo stop zap start would abort immediately
after "stop" if the service has been stopped already. Though there may be cases
were we need it to proceed with the remaining commands, zap and start in this
case.
This patch fixes the behaviour to continue and proceed with the remaining
commands whenever necessary.
X-Gentoo-Bug: 371845
X-Gentoo-Bug-URL: https://bugs.gentoo.org/371845
This test is incorrect, and we do not need the modprobe. If macvlan is a
module, it is automatically modprobed when the first macvlan link is
added. Also, the /sys directory referred to in the test does not exist
if macvlan is built into the kernel.
Reported-by: Marien Zwart <marienz@gentoo.org>
X-Gentoo-Bug: 396427
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=396427
During the sysinit and shutdown runlevels the logfile destination may be
read-only. Skip the error messages in this case.
X-Gentoo-Bug: 390645
X-Gentoo-Bug-URL: https://bugs.gentoo.org/390645
The logfile or its basedir may be read-only during shutdown because the
directory may be umounted or read-only remounted already. In this case we simply
skip this error.
This is related to a comment in bug 390645 but the initial bug is not fixed
through this commit.
X-Gentoo-Bug: 390645
X-Gentoo-Bug-URL: https://bugs.gentoo.org/390645
Since commit 683a21b0a in Feburary 2011, iproute2 has been required for
new VLAN configuration. MACVLAN is also impossible to configure without
iproute2. However we did not check if iproute2 was actually in the
modules for a given interface, so it could end up hanging or giving
weird errors. Check for iproute2 before usage now.
X-Gentoo-Bug: 389437
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=389437
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
We need to create interfaces of custom names before we can sucessfully
start them. To do this, we have to add tunnels during prestart instead
of start. Split up the ip6to4 script to do this, saving the computed
variables for use in start with the new service data commands.
X-Gentoo-Bug: 372575
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=372575
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Historically, we have tried to up interfaces before running preup, so
that the kernel setups up the device and makes things like ethtool work
(some hardware cannot be correct probed until then). However this ends
up breaking other hardware, so a variable has been introduced to allow
the up prior to preup to be disabled: up_before_preup_IFVAR=no
X-Gentoo-Bug: 389475
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=389475
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Broadcast and IPv6 should not be used together. Do not try to set the
keyword for auto-generation of the broadcast address. If the user passes
a broadcast address for IPv6, throw an error.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Several of the optional flags were not being handled correctly, they
were being passed as values only, without the keyword before them.
Affected keywords: anycast, label, scope, valid_lft, preferred_lft
Also change the handling of keywords to a common setup now, making
broadcast and peer strings the same as the above keywords.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Currently, cgroups are still in development, so we are not setting them
up by default. However, this default will be changed in the future.
This commit message and patch were updated by
William Hubbs <williamh@gentoo.org>.
X-Gentoo-Bug: 395079
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=395079
The linux kernel documentation suggests mounting a separate cgroup
hierarchy for each subsystem you want to control/monitor. This changes
the cgroups mounting code to do this.
For creation of routing policy entries for IPv6, the family must be
explicitly specified to 'ip'.
X-Gentoo-Bug: 385833
X-Gentoo-Bug-URL: https://bugs.gentoo.org/385833
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Provide consistent methods using iproute2/ifconfig to check operational
and administrative up/down state of interfaces. This is not the same as
ethtool's "Link detected" field, which is the state of the layer 2
medium.
TODO: How to check operational state in BSD?
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
The old ifenslave binary forcibly set new slave interface to down before
adding into the kernel, as a way of show it's version to the kernel. We
need to duplicate this so that the kernel doesn't think it's an old
ifenslave version using the bonding setup interface.
X-Gentoo-Bug: 391881
X-Gentoo-Bug-URL: https://bugs.gentoo.org/391881
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Thanks-to: Yun Zheng Hu <hu@fox-it.com>
The migrate-run service was hanging when parallel startup was enabled
because of its dependencies. This integrates the logic for this service
into bootmisc, which will avoid the issues with parallel startup.
I would like to thank Robin H. Johnson <robbat2@gentoo.org> for his
input on this patch
rc_parallel has never been considered a stable feature of openrc. To
that end, I am removing the documentation for this feature from
rc.conf.
It is still available, but bugs against it are not considered stable
blockers, and it should only be used currently by developers and users
who are willing to test the feature.
X-Gentoo-Bug: 391945
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=391945
Openrc will create a cgroup hierarchy called openrc which will have all
services it starts and all subsystems attached to it. If you need other
groups/hierarchies, please use libcgroup.
The kernel documentation states that a cgroup file system should not be
mounted here, but a tmpfs.
This also means that we should not create a group for each process, but
we should allow the user to specify which group a process should be
assigned to. The rc_cgroup variable will be used for this purpose.
For more information, see /usr/src/linux/Documentation/cgroups/cgroups.txt.
The MKSTATICLIBS switch, which defaults to yes, controls whether or not
static libraries are built and installed.
Reported-by: Agostino Sarubbo <ago@autistici.org>
x-Gentoo-Bug: 378267
x-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=378267
When a CGroup is created, we need to copy cpuset.cpus and cpuset.mems
from the new group's parent into the new group before we can attach any
processes to it.
On several machines, a file corresponding to AC adapter can be named
ADP1. The on_ac_power script checked for AC*, which does not match
ADP1, so the script always considered the adapter to be off.
X-Gentoo-Bug: 380933
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=380933
These scripts are not supported, and they have several major design
issues such as not being able to stop, start or allow a dependency on a
single interface.
The example of how to configure the bridge was invalid. It showed
invalid timer settings along with turning off stp. This update shows how
to turn on stp and set the timer settings to the defaults.
Reported-by: Sergey S. Starikoff < Ikonta@yandex.ru>
X-Gentoo-Bug: 389209
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=389209
Some variable references were written as $(foo), but the majority were
written as ${foo}. This commit changes all of the variable references
to using braces.
The tree contained many operating system specific Makefiles which were
being included in other Makefiles. This commit removes those and adds
the code to the makefiles which included them using make's conditional
processing.
X-Gentoo-Bug: 387441
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=387441
Make sure the VLAN interfaces as well as its rules will be removed prior
to the actual/parent interface.
The VLAN configs are gone in vlan_post_stop() already so we have to use
vlan_pre_stop() instead.
Reported-by: Bernd Bednarz <bernd.bednarz@avira.com>
X-Gentoo-Bug: 380603
X-Gentoo-Bug-URL: https://bugs.gentoo.org/380603
A new helper function (_array_helper) since both, the _flatten_array and
_get_array function share partially the same code.
We also reduce multiple whitespace to a single space, remove leading newlines
as well as skipping "empty" lines.
This makes the data returned by _{flatten,get}_array much nicer than before.
It also fixes bug 366677 where net-tools having trouble with the whitespace
mentioned above. iproute2 was not affected.
Reported-by: Andrew Maltsev <am@ejelta.com>
X-Gentoo-Bug: 366677
X-Gentoo-Bug-URL: https://bugs.gentoo.org/366677
iproute2_post_stop() does now check if the network interface still exist.
Reported-by: Yun Zheng Hu <hu@fox-it.com>
X-Gentoo-Bug: 379575
X-Gentoo-Bug-URL: https://bugs.gentoo.org/379575
The dedicated nfs init.d script takes care of mounting this when
necessary, and we want it there since mounting it isn't terribly
useful if you can't actually start up the nfs daemons (which the
nfs-utils package provides).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This is a KISS version. Let's see where we go from here in terms of
complexity. Maybe nowhere!
X-Gentoo-Bug: 382723
X-Gentoo-Bug-URL: https://bugs.gentoo.org/382723
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
ethtool.sh didn't reset the Internal Field Seperator (IFS) properly.
It now does, by storing the old IFS to OIFS, which will be used later
in the for loop.
It also fixes the "ethtool_ring_<if>" option.
Reported-by: Alois Schmid <alois.schmid@gmx.de>
X-Gentoo-Bug: 368525
X-Gentoo-Bug-URL: https://bugs.gentoo.org/368525
ARP replies may/do contain two MAC addresses when using iputils's
arping so we have to use the first one because it's always the "From"
address - which is what we want.
Thanks to Stefan Knoblich <s.knoblich@axsentis.de> for the fixed pattern.
Reported-by: cl@exomail.to
X-Gentoo-Bug: 379181
X-Gentoo-Bug-URL: https://bugs.gentoo.org/379181
This patch fixes the regex pattern for /lib -> /lib(32|64)?
as well as the pattern for RC_SVCDIR if it contains /lib(32|64)?/.
This fixes bug 381783.
X-Gentoo-Bug: 381783
X-Gentoo-Bug-URL: https://bugs.gentoo.org/381783
The ewarn() function was affected by the EINFO_QUIET environment
variable which lead to warning messages being suppressed. Warnings
should not be suppressed.
Reported-by: Hanno Boeck <hanno@gentoo.org>
X-Gentoo-Bug: 380073
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=380073
symbolic links should not be followed in an attempt to work out the name
of the service we are running. Also, @sysconfdir@/conf.d should be tried
as a backup directory for configuration files.
I would like to thank Robin Johnson for his input on this change.
X-Gentoo-Bug: 350910
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=350910
If $RC_SVCDIR/shutdowntime does not exist, we need a default reference
file. It is safe to use @PREFIX@/sbin/runscript for this purpose.
Reported-By: Robin H. Johnson <robbat2@gentoo.org>
X-Gentoo-Bug: 376249
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=376249
Openrc uses the extra_commands and extra_started_commands variables to
list extra commands for services. Also, it supports the opts variable
which is used to assist migration from baselayout-1.
I am adding this warning to encourage switching from opts to
extra_commands/extra_started_commands.
I would like to remove support for opts eventually.
/etc/mtab can be a link to a file in /proc. If it is, we should not
attempt to update /etc/mtab.
The original test used "! -w" as part of the test. This does not
work since everything is writeable by root.
Thanks to Robin Johnson for the suggestion of using readlink -f and the
regular expression.
Reported-By: junkmailnotread@yahoo.com
X-Gentoo-Bug: 370037
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=370037
This was originally to fix the fact that our code did not handle certain
orders of arguments in conversion, but it was easier to rewrite the
entire argument handling to support more options at the same time.
Now supports all options documented in the ip manpage, including the
IPv6-specific options that must be passed after the interface argument.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Reported-by: Tony Vroon <chainsaw@gentoo.org>
X-Gentoo-Bug: 366905
X-Gentoo-Bug-URL: https://bugs.gentoo.org/366905
Currently, we allow the use of bash arrays for some configuration settings.
This is undocumented, so I want to remove the support from openrc.
The first phase of this removal will be this commit which adds warnings
to encourage people not to use bash arrays.
X-Gentoo-Bug: 374875
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=374875
As introduced in bug 372547 using service_get_value() in the init scripts
or using rc_service_value_get() directly will only return one line.
This patch fixes it by using the new rc_getfile() function, it returns even
multiple lines. We're still using a char *, so the lines will be appended
instead of added into new element.
X-Gentoo-Bug: 372547
X-Gentoo-Bug-URL: http://bugs.gentoo.org/372547
<snip>
Read the entire @file into the buffer and set @len to the
size of the buffer when finished. For C strings, this will
be strlen(buffer) + 1.
Don't forget to free the buffer afterwards!
</snip>
We also fix bug 374899 by adding this new function.
X-Gentoo-Bug: 374899
X-Gentoo-Bug-URL: http://bugs.gentoo.org/374899
OpenRC goes through the config and checks each option for duplicates.
Lets say we're on "rc_logger" currently and its the last option in the config
file and we previously defined rc_logger_path.
It now goes through all previous config options and compares those against the
current one "rc_logger" *but* it compares only the first N bytes, in this
case strlen("rc_logger"). So it strips the _path from "rc_logger_path" which
ends up into "rc_logger" and it compares that against the current one (also
"rc_logger"), it would then simply override the previous definition.
This patch fixes this behaviour to always compare the full option / variable
names.
The extra_net_fs_list variable was not being included as it should have
been for the net file systems because it was being expanded before it
was set by the user.
X-Gentoo-Bug: 374133
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=374133
Add "e" (O_CLOEXEC) to all fopen() calls.
Remove system() call and replace it by fopen() and friends.
This also fixes bug 368933
X-Gentoo-Bug: 368933
X-Gentoo-Bug-URL: https://bugs.gentoo.org/368933
The version iteration code missed certain combinations:
KV=1.2.3.4
skips: 1.2.3, 1
KV=1.2.3
skips: 1
Simplify the code to use a loop and build the list of versions directly
instead of unique variables per version component.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
We need to bring the link up ourselves after we've properly configured
the device. The common code tries to bring the link up itself, but it
does so before things are configured, and so it ends up failing.
When shutting down, we need to wait for the kernel to finish destroying
the interface. Otherwise, when doing a restart, openrc is quick enough
to tell the kernel to destroy things, but then start trying to bring it
back up before the kernel has finished.
X-Gentoo-Bug: 367467
X-Gentoo-Bug-URL: http://bugs.gentoo.org/367467
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This allows options to be passed to killall5 by the killprocs script.
This was added so that certain processes will not be killed during
shutdown.
x-Gentoo-Bug: 371625
x-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=371625
If unknown keys are found, currently sysctl would add all of its valid
settings, but then leave itself marked as "stopped". Since this is not
really what we want, make unknown keys a non-fatal error.
Reported-by: Christian Ruppert <idl0r@gentoo.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Rather than listing explicit object files, ignore all of them in
the whole tree.
Also ignore patch/gdb related files throughout.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
LXC already provides a means to set the utsname/hostname of the system, so
avoid overriding the user's configuration through hostname here.
Signed-off-by: Diego Elio Pettenò <flameeyes@gmail.com>
Since we always want debug.mk whenever we include cc.mk, move the include
out of the Makefiles and into cc.mk itself. This also fixes an include
order bug in rc/Makefile where debug.mk is included before cc.mk and
breaks the default CFLAGS setup in cc.mk.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
runscript will try to get the dir and basename of a file/link in case it
contains at least one slash. This patch gives a temporary copy of the path to
the dirname() function since dirname() can modify its argument.
The automagic detection isn't really problematic, and we allow people to
easily override this when detection isn't possible. On the other hand,
if people haven't configured rc_sys in their rc.conf, the lack of auto
detection can easily lead to an unbootable system.
Further, we're attempting to have a stable shared library ABI, which
dropping funcs from is not feasible.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Quite a bit of work happened in baselayout-1 on the ccwgroup module, but
seems it didn't make it into openrc. So forward port all the existing
code so we can work with more than just qeth and layer2 options.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
If there were no extra commands, rc_service_extra_commands returned a
list containing a single empty string. This changes that to return an
empty list, which is more consistent with what you would expect.
X-Gentoo-Bug: 360013
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=360013
This function was returning the setting of the variable $opts, which is
not correct. $opts was used in baselayout-1, but it is replaced by
$extra_commands and $extra_started_commands in openrc.
This does not appear to break backward compatibility since this function
does not appear to be used anywhere in the openrc code.
Thanks to James Le Cuirot for the original patch.
X-Gentoo-Bug: 360013
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=360013
This updates the udhcpc support to use busybox's udhcpc instead of the
stand alone version.
I would like to thank jackieku <kjackie@gmail.com> for assisting with
this update.
X-Gentoo-Bug: 205286
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=205286
This was added back due to a user request. It will always be on a line
of its ownbecause I'm considering adding more verbose info messages to
local that show when each service is run if local is run with the -v
option.
X-Gentoo-Bug: 363343
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=363343
- Add support for a global plug_timeout setting to match the
documentation.
- Update the documentation to also show per-interface configuration.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
This rearranges the configuration files so it is more clear that the
rc_sys setting is system specific.
X-Gentoo-Bug: 363957
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=363957
The use of /proc/bus/usb to mount usbfs has been deprecated, but
the option is still available in the kernel. The new approach is
to use /sys. We should not modprobe usbcore if either /proc/bus/usb
or /sys/module/usbcore exist.
X-Gentoo-Bug: 363551
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=363551
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
This is being done because these dependency changes caused a regression.
We will need to revisit the previously mentioned bug.
X-Gentoo-Bug: 363693
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=363693
For most situations, the loopback interface can depend on root instead
of localmount, so this patch makes that happen. It also adds comments to
the net.example files explaining when a user might want to change this
and giving an example.
I would like to thank Robin Johnson for the original patch and suggested
examples.
X-Gentoo-Bug: 292894
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=292894
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Add support for optional fallback_routes_* variables in the network scripts.
This is similar to the fallback_route_* support in baselayout-1.
However, if you do not have fallback_routes set for an interface but you
do have routes set, that setting will be used, so you do not need this
variable unless you want the fallback routes to be different from the
primary routes.
X-Gentoo-Bug: 250978
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=250978
It is possible for bootmisc to take longer than 60 seconds to complete
and services should not time out waiting for it.
X-Gentoo-Bug: 360405
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=360405
This is primarily for users with set_name_type settings from previous
sysadmins can easily see what changes to make.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Make sure that the `cd` into the $dir actually happened. This we don't
have to worry about relative paths deleting stuff it shouldn't. This
step shouldn't fail, but who knows, and better to be sane than to wipe
out someone's valuables.
When wiping, automatically fall back to a dedicated `find` if the initial
`rm` failed on us. This should help with the speed issues related to the
later `find`.
Have the later find only search the top level allowing `rm` to walk the
directory contents. This means that -xdev no longer applies, but since
the earlier `rm` wasn't doing -xdev either and no one has complained thus
far, let's assume it isn't an issue. Also convert to the -exec...+ form
so that we don't have to worry about long argument lists, and add -- to
the `rm` that was previously missing. In practice, this shouldn't matter
as we've already deleted all those files, but better safe than sorry.
When cleaning, since we've already done a `cd` into the $dir, no point in
prefixing all the paths with $dir too. Go with the relative loving.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
X-Gentoo-Bug: 359831
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=359831
The previous test assumed that we could always rely on the minor fault
counter to change between reads of /proc/self/stat, but we found that
this is not the case.
The new test compares two reads of /proc/self/environ for which we have
set the same environment variable to two different values.
If the comparison shows the two reads have the same contents, we know
that /proc is not working.
I would like to thank Robin Johnson and Mike Frysinger for their input
for this patch.
X-Gentoo-Bug: 348416
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=348416
The documentation makes a recommendation for the setting but does not
state the purpose of the variable.
X-Gentoo-Bug: 357869
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=357869
Originally the plan was to deprecate this code, but this will not be
happening. There are some subsystems which can still be autodetected, so
we are keeping this code and allowing users to override the automatic
detection with this variable as well as set it to other subtypes we
cannot autodetect.
X-Gentoo-Bug: 357247
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=357247
The default rc_sys behavior was changed to always require manual
intervention by users. This pretty much breaks all of the diff
system variants out there if people don't explicitly edit their
rc.conf file ahead of time. We should have things work "out of
the box" as much as possible and reasonable.
X-Gentoo-Bug: 357247
X-Gentoo-Bug-URL: http://bugs.gentoo.org/357247
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Since mount-ro needs to run unconditionally, we need to have savecache
report that it ran successfully when the system is shutting down.
X-Gentoo-Bug: 356393
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=356393
This allows the default value of rc_sys to be set when openrc is
compiled. This will allow openrc to be installed, e.g. on vserver guests
and will allow them to be rebooted without the need to edit rc.conf.
This patch is a combined effort between myself and Robin Johnson.
X-Gentoo-Bug: 357247
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=357247
Implement a consistent interface for changing ethtool parameters, as
suggested in bug 195479. All variable names are based on the long option
to ethtool to set each group of parameters. Multiple entries seperated
by newlines are permitted for variable values.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
X-Gentoo-Bug: 195479
Tunnel modes ipip6 and ip6ip6 require an explicit family selection for
the ip tunnel call.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
X-Gentoo-Bug: 347657
This replaces the vlan setup code that previously used the old vconfig
binary with a new implementation using the iproute2 interface.
vconfig does not handle many of the newer setups. No automatic migration
path is provided, as altering the configuration is non-trivial.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Written-by: Guillaume Castagnino <casta@xwing.info>
X-Gentoo-Bug: 346365
This reworks the implementation of the --applet option so that it is
processed in run_applets() and does not require two calls to the
getopts_long() function. It is based on code by Robin Johnson and Chris
Richards.
X-Gentoo-Bug: 351712
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=351712
Parisc generates a few relocs against internal symbols which are OK.
X-Gentoo-Bug: 258913
X-Gentoo-Bug-URL: http://bugs.gentoo.org/258913
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
We need to set the timezone for the system clock even when we allow the
kernel to set the time.
X-Gentoo-Bug: 248131
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=248131
The target for the symlinks in ${SBINDIR} (the same directory as the rc
binary) was "rc". This is not correct; the target should be
${SBINDIR}/rc instead.
This allows error checking inside the included files instead of either
including the appropriate file or a blank file.
Also the blank file named .mk gets removed by this change.
The main makefile, init.d/Makefile and src/librc/Makefile all contain
several shell calls which can be handled as make conditionals. This
switches them to conditionals.
This reworks the shell calls in the makefiles to use immediate
evaluation and should improve parallel building.
X-Gentoo-Bug: 289264
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=289264
Update the documentation to state that openrc only works with gnu make.
This needs to be done in order to address the parallel build issue.
X-Gentoo-Bug: 289264
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=289264
This commit adds the clock_hctosys option which is used to skip setting
the system clock on boot and can be used with a modern linux kernel
which has the CONFIG_RTC_HCTOSYS option set to y.
I would like to thank Dimitris Mandalidis for the report and for the
patch to baselayout-1 on which my changes to openrc are based.
X-Gentoo-Bug: 248131
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=248131
This changes the local service so that it will run programs located in
@sysconfdir@/local.d instead of the local_start and local_stop functions
from @sysconfdir@/conf.d/local.
The advantage for the user is that these programs are not part
of the openrc package, so the user does not have to worry about them
being overwritten when openrc is upgraded.
X-Gentoo-Bug: 351465
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=351465
Previously we checked if /proc was alive by reading /proc/uptime twice
with a 1 second sleep between calls, so that it had time to update.
This got a complaint of an entire 1 second delay, so we improve the
check to be much faster without sleep. We cannot continue to use
/proc/uptime as it only has a 10ms resolution.
X-Gentoo-Bug: 348416
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=348416
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Refactor rc_conf_value into librc for use in library context.
Also requires moving:
- rc_conf internal static
- Defines: PROFILE_ENV, SYS_WHITELIST, USR_WHITELIST, RC_PATH_PREFIX
moved to rc.h with new RC_ prefix added.
- Defines: RC_CONF, RC_CONF_OLD moved to rc.h.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
In addition to detecting what multicall applet we want via argv[0],
provide an explicit override mode with a --applet initial argument.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
The deprecation notice for automatic detection of the system type stated
that the automatic detection will be removed no later than 2010/03/01,
but it should state 2011/03/01.
* status on a stopped service now has a return code of 3 (was 1)
* starting an already started service now has a return code of 0 (was 1)
* stopping an already stopped service now has a return code of 0 (was 1)
runscript.sh needs to abort if the . command used to load
conf.d files and the service script does not execute successfully.
I would like to thank Mike Frysinger for his input wrt style on this
patch.
- delete the contents of the $RC_LIBEXECDIR/console directory but not
the directory itself.
- direct error output from the chmod call for /tmp to /dev/null.
Any system using cgroups was being detected as an LXC system. This was
triggering on OpenVZ under RHEL6 as well as the "automated per tty task
groups" as discussed on the LKML.
All LXC users should now switch to the new rc_sys variable introduced in
the previous patch.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
- Fixes bugs #347583, #349389, both of which were triggered by cgroups
being detected as the LXC subsystem type.
- Makes it much easier to select "prefix" type.
- "rc -S" will now print a warning if you have not configured rc_sys in
/etc/rc.conf
- All other semantics of rc_sys are unchanged in this patch.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Specifically document how to handle the case of explicitly starting a
bridge and then dynamically adding interfaces to it.
brctl_br0=''
bridge_add_eth0='br0'
This can be used for multi-homed connections and other advanced routing
in Linux. See the documentation links for more information about doing
this in linux.
The code was a originally pure addon into the conf.d/net files, written
in mid-2004 for doing multi-homing between two internet connections. I
have finally cleaned this up and integrated it. Thanks to Jonathan Kwan
for giving me the original impetus to develop this for Gentoo (it was
his dual internet connections...).
In the intervening years, it was a example of postup/postdown in the
net.example file, however that suffered from a few corner case issues.
If you were using the code from net.example, please see the updated
section 'Advanced Routing' on syntax, and drop your old function blocks.
Additionally, note that the rules added are now directly saved for
removal when the interface is taken down.
- Use sysfs to read bridge information from the system instead of
parsing the brctl outputs.
- Allow setting of all bridge configuration parameters using new sysfs
methods, modelled after bonding configuration. Also works for per-port
bridge interface parameters.
- Document pre-starting an empty bridge for dynamic add.
- Check for interface existence before adding to bridge.
- Should fix bug #293046, #309185.
The _netdev option in fstab on linux systems indicates
that a filesystem should only be mounted if the network is available.
This commit fixes netmount to support this.
Under normal conditions, runscript creates one child and waits for its
termination, which is signaled by a pipe write from the SIGCHLD
sighandler.
When running killprocs however more than one SIGHCLD signal is generated, at
least on all of my amd64 boxes running on real hardware and in vmware.
When the first SIGCHLD occurs svc_exec leaves the loop and closes the pipe.
Subsequent SIGCHLDs during the close can lead to a race condition and create an
EBADF error in the pipe write (pipe is closed but the file handle is still !=
-1).
We avoid this by blocking SIGHCHLD during the pipe close.
This reverts commit 4ea75dd1d6.
This caused a regression, see bug #345795.
Ifplugd is only designed to support wireless interfaces that use the
older wireless extentions.
We need to warn users that they should be using /etc/conf.d/local
instead of /etc/conf.d/local.start and /etc/conf.d/local.stop. This adds
those warnings.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
