Merge remote-tracking branch 'gentoo/master'

This fixes bug #342825.

Makefile

@@ -1,10 +1,15 @@
 # OpenRC Makefile
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 include Makefile.inc
 
-SUBDIR=		conf.d doc etc init.d local.d man net scripts sh src
+SUBDIR=		conf.d etc init.d local.d man scripts sh src
+
+# Build our old net foo or not
+ifeq (${MKOLDNET},yes)
+SUBDIR+=	net doc
+endif
 
 # Build pkgconfig or not
 MKPKGCONFIG?=	yes

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.9.6
+VERSION=	0.8.2
 PKG=		${NAME}-${VERSION}

README

@@ -1,8 +1,9 @@
 OpenRC README
-
+=============
 
 Installation
 ------------
+
 make install
 Yup, that simple. Works with GNU make.
 
@@ -14,9 +15,9 @@ MKPAM=pam
 MKPKGCONFIG=no
 MKRCSYS=prefix
 MKSELINUX=yes
-MKSTATICLIBS=no
 MKTERMCAP=ncurses
 MKTERMCAP=termcap
+MKOLDNET=yes
 PKG_PREFIX=/usr/pkg
 LOCAL_PREFIX=/usr/local
 PREFIX=/usr/local
@@ -67,33 +68,54 @@ init.d.misc is not installed by default as the scripts will need
 tweaking on a per distro basis. They are also non essential to the operation
 of the system.
 
-
 Reporting Bugs
---------------
-Since Gentoo Linux is hosting OpenRC development, Bugs should go to
-the Gentoo Bugzilla:
-	http://bugs.gentoo.org/
-They should be filed under the "Gentoo Hosted Projects" product and
-the "openrc" component.
 
+If you installed OpenRC from your chosen distribution, you should report
+bugs directly to them. For example, if you use Gentoo and emerged OpenRC
+then you should reports bugs to http://bugs.gentoo.org.
 
-History - by Roy Marples
-------------------------
-I became a Gentoo/Linux developer in 2004 and wrote the modular network
-scripts for the Gentoo baselayout package. baselayout is a collection of
-bash scripts to bring up your computer and its services.
-Then towards the end of 2005 I found myself as the primary maintainer
-for baselayout.
+History - by Daniel Robbins
+---------------------------
 
-At the start of 2007, baselayout-2 is announced to the world, re-writing the
-core of baselayout in C and allowing POSIX sh init scripts instead of
-forcing the use of bash. By Mid 2007 I have re-written everything, including
-init scripts, and alpha and pre baselayout-2 snapshots where put into Gentoo.
-Towards the end of 2007 I retired as a Gentoo developer for reasons I won't
-go into here. baselayout-2 was still in the pre stage, and aside from the
-fbsd users, it was masked everywhere. However, I also desired to keep the
-baselayout-2 project alive, but outside of Gentoo and into other projects
-such as FreeBSD.
+The Gentoo modular network scripts were created by Daniel Robbins for
+Gentoo Linux 1.0_rc6, in development during most of 2001 and released
+in September 2001. After their development, the dependency-based initscript
+system was maintained by a number of senior developers (add names here....
+need to look at baselayout cvs logs.)
 
-As such, the Gentoo Council have allowed the creation of OpenRC under the
-2 clause BSD license, managed by me as an external project.
+excerpt from http://www.gentoo.org/news/en/gwn/20040426-newsletter.xml
+by Grant Goodyear:
+
+"My recollection is that one of woodchip's more impressive early feats was the
+complete replacement of all of the init scripts in Portage for Gentoo Linux
+1.0_rc6. Through 1.0_rc5 Gentoo had used fairly standard rc scripts modified
+from Stampede Linux, but for 1.0_rc6 Daniel Robbins (drobbins) and Martin
+Schlemmer (azarah) had created a new dependency-based init script system that
+is still used today. Within a span of days Donny rewrote every single init
+script in the Portage tree and committed new masked packages to await the
+release of 1.0_rc6. Thanks to woodchip (and drobbins and azarah, of course) the
+transition to the new init scripts was nearly painless."
+
+Roy Marples became a Gentoo/Linux developer in 2004 and maintained the modular
+network scripts for the Gentoo baselayout package.  Then towards the end of
+2005, he became the the primary maintainer for baselayout.
+
+At the start of 2007, Roy Marples announced the ongoing development of
+baselayout-2, containing a rewritten initscript code in C and allowing POSIX sh
+init scripts instead of forcing the use of bash. By Mid 2007 Roy Marples had
+re-implemented the Gentoo initscript design created by Daniel Robbins, using an
+entirely new code base.  Alpha and pre-release baselayout-2 snapshots were
+added to Gentoo's Portage tree as an optional component.
+
+Towards the end of 2007, Roy Marples retired as a Gentoo developer Baselayout-2
+was still in the pre stage, and aside from the fbsd users, it was masked
+everywhere. However, Roy Marples desired to keep the baselayout-2 project
+alive, but outside of Gentoo and into other projects such as FreeBSD.
+
+As such, the Gentoo Council permitted Roy Marples to release OpenRC under the 2
+clause BSD license, managed by him as an external project. Around mid-2010, Roy
+Marples decided to no longer maintain OpenRC. At this point, he transferred
+development back to Gentoo, which continues to maintain the scripts. In
+addition, Daniel Robbins continues to maintain an independent version OpenRC
+for Funtoo Linux, which includes a Funtoo-specific network configuration
+system.

README.newnet

@@ -0,0 +1,40 @@
+The following applies only to the newnet stack, which is not presently
+maintained in OpenRC. The oldnet stack is maintained instead.
+- Robin H. Johnson <robbat2@gentoo.org>, 2011/02/21
+
+OpenRC Network Ideals
+---------------------
+
+The new style networking for OpenRC is very simplistic - provide a basic means
+of configuring static interface address and routes whilst allowing the
+possibility to run any command at any point.
+
+In a nutshell, init.d/network is a wrapper around ifconfig(8) and
+init.d/staticroute is wrapper around route(8).
+
+In the Perfect World (TM) ifconfig should be able to configure everything
+about the interface easily * . The BSD family almost get this right and Linux
+epically fails.
+
+* Only static configuration, including link setup.
+For dynamic, static, IPv4LL, arping and per ssid IPv4 setup dhcpcd-5.x
+provides your needs.
+
+It fails because there are many tools to do the same job and often have
+vastly different syntax where they could be similar. In other words, there
+is no coherence.
+
+OpenRC-0.4.x and older (inc Gentoo baselayout-1) had a collection of scripts
+for each tool and allowed a script per interface. Over the years, this design
+has proven very hard to maintain as each user has their own idea of how
+things should work. Also, there were (and still are) race conditions.
+
+So where do we go from here?
+Well, it's possible to use the new network scripts using the tools
+currently available. It's just harder as you have to know them and their
+documentation can be lacking at times.
+The correct end goal is a BSD style ifconfig tool.
+I've started work on it, but the project has stalled somewhat.
+It's display only right now and the source is not yet publicly available.
+If you have the skills and share the vision then contact me privately and
+we'll take it from there.

STYLE

@@ -32,54 +32,3 @@ void foo(int c)
 
 	return ret;
 }
-
-##################
-# COMMIT MESSAGES #
-##################
-
-The following is an example of a correctly formatted git commit message
-for this repository. Most of this information came from this blog post
-[1], so I would like to thank the author.
-
-### cut here ###
-Capitalized, short (50 chars or less) summary
-
-More detailed explanatory text, if necessary.  Wrap it to about 72
-characters or so.  In some contexts, the first line is treated as the
-subject of an email and the rest of the text as the body.  The blank
-line separating the summary from the body is critical (unless you omit
-the body entirely); tools like rebase can get confused if you run the
-two together.
-
-Write your commit message in the present tense: "Fix bug" and not "Fixed
-bug."  This convention matches up with commit messages generated by
-commands like git merge and git revert.
-
-Further paragraphs come after blank lines.
-
-- Bullet points are okay, too
-
-- Typically a hyphen or asterisk is used for the bullet, preceded by a
-  single space, with blank lines in between, but conventions vary here
-
-- Use a hanging indent
-
-Reported-by: User Name <email>
-X-[Distro]-Bug: BugID
-X-[Distro]-Bug-URL: URL for the bug (on the distribution's web site typically)
-### cut here ###
-
-If you did not write the code and the patch does not include authorship
-information in a format git can use, please use the --author option of the
-git commit command to make the authorship correct.
-
-The Reported-by tag is required if the person who reported the bug is
-different from the author and committer.
-
-  The X-[Distro]-Bug/Bug-URL tags are required if this commit is related
-  to a bug reported to us by a specific distribution   of linux or a
-  *BSD. Also, [Distro] should be replaced with the name of the
-  distribution, e.g. X-Gentoo-Bug.
-
-[1] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html
-

conf.d/Makefile

@@ -1,23 +1,19 @@
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount network staticroute urandom \
-	${CONF-${OS}}
+CONF=	bootmisc fsck hostname localmount network staticroute urandom
 
 TARGETS+=	network staticroute
 CLEANFILES+=	network staticroute
 
 MK=	../mk
 include ${MK}/os.mk
-
-CONF-FreeBSD=	ipfw moused powerd rarpd savecore syscons
-
-CONF-Linux=	consolefont dmesg hwclock keymaps killprocs modules
-
-CONF-NetBSD=	moused rarpd savecore
-
+include Makefile.${OS}
 include ${MK}/scripts.mk
 
-network: network.in network${SFX}
-	cat $^ > $@
+SOS?=	BSD
 
-staticroute: staticroute${SFX}
-	cp $@${SFX} $@
+network: network.in network.${SOS}
+	cp $@.in $@
+	[ -e $@.${SOS} ] && cat $@.${SOS} >> $@ || true
+
+staticroute: staticroute.${SOS}
+	cp $@.${SOS} $@

conf.d/Makefile.FreeBSD

@@ -0,0 +1 @@
+CONF+=	ipfw moused powerd rarpd savecore syscons

conf.d/Makefile.Linux

@@ -0,0 +1,2 @@
+CONF+=	consolefont dmesg hwclock keymaps modules
+SOS=	Linux

conf.d/Makefile.NetBSD

@@ -0,0 +1 @@
+CONF+=	moused rarpd savecore

conf.d/bootmisc

@@ -4,7 +4,3 @@ clean_tmp_dirs="/tmp"
 # Should we wipe the tmp paths completely or just selectively remove known
 # locks / files / etc... ?
 wipe_tmp="YES"
-
-# Write the initial dmesg log into /var/log/dmesg after boot
-# This may be useful if you need the kernel boot log afterwards
-log_dmesg="YES"

conf.d/consolefont

@@ -3,7 +3,7 @@
 # you shouldn't specify the trailing ".psf.gz", just the font name below.
 # To use the default console font, comment out the CONSOLEFONT setting below.
 # This setting is used by the /etc/init.d/consolefont script (NOTE: if you do
-# not want to use it, run "rc-update del consolefont boot" as root).
+# not want to use it, run "rc-update del consolefont" as root).
 consolefont="default8x16"
 
 # consoletranslation is the charset map file to use.  Leave commented to use

conf.d/fsck

@@ -13,13 +13,6 @@
 #fsck_passno=">1"
 #fsck_passno="<2"
 
-# If passno is not enough granularity, you can also specify mountpoints to
-# check. This should NOT be used for the default non-multiplexed fsck, or your
-# system might not be checked. Additionally, it is mutually exclusive with
-# the fsck_passno setting.
-#fsck_mnt=""
-#fsck_mnt="/home"
-
 # Most modern fs's don't require a full fsck on boot, but for those that do
 # it may be advisable to skip this when running on battery.
 # WARNING: Do not turn this off if you have any JFS partitions.

conf.d/killprocs

@@ -1,3 +0,0 @@
-# If you wish to pass any options to killall5 during shutdown,
-# you should do so here.
-killall5_opts=""

conf.d/modules

@@ -1,10 +1,8 @@
 # You can define a list modules for a specific kernel version,
 # a released kernel version, a main kernel version or just a list.
-# The most specific versioned variable will take precedence.
 #modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
 #modules_2_6_23="tun ieee1394"
 #modules_2_6="tun"
-#modules_2="ipv6"
 #modules="ohci1394"
 
 # You can give modules a different name when they load - the new name
@@ -12,12 +10,10 @@
 #modules="dummy:dummy1"
 
 # Give the modules some arguments if needed, per version if necessary.
-# Again, the most specific versioned variable will take precedence.
 #module_ieee1394_args="debug"
-#module_ieee1394_args_2_6_23_gentoo_r5="debug2"
-#module_ieee1394_args_2_6_23="debug3"
-#module_ieee1394_args_2_6="debug4"
-#module_ieee1394_args_2="debug5"
+#module_ieee1394_args_2_6_23_gentoo_r5="ieee1394 ohci1394"
+#module_ieee1394_args_2_6_23="tun ieee1394"
+#module_ieee1394_args_2_6="tun"
 
 # You should consult your kernel documentation and configuration
 # for a list of modules and their options.

conf.d/net

@@ -1,4 +1,4 @@
 # This blank configuration will automatically use DHCP for any net.*
 # scripts in /etc/init.d.  To create a more complete configuration,
-# please review /usr/share/doc/openrc*/net.example* and save your configuration
+# please review /usr/share/doc/openrc/net.example and save your configuration
 # in /etc/conf.d/net (this file :]!).

doc/Makefile

@@ -1,11 +1,7 @@
 DIR=	${DOCDIR}/openrc
-SRCS=	net.example.in
 INC=	net.example
 
 MK=	../mk
 include ${MK}/os.mk
-
-%.example.in: %.example${SFX}
-	${CP} $< $@
-
+include Makefile.${OS}
 include ${MK}/scripts.mk

doc/Makefile.FreeBSD

@@ -0,0 +1,5 @@
+SRCS+=		net.example.in
+
+.SUFFIXES:	.BSD.in
+.BSD.in:
+	${CP} $< $@

doc/Makefile.Linux

@@ -0,0 +1,5 @@
+SRCS+=		net.example.in
+
+.SUFFIXES:	.Linux.in
+.Linux.in:
+	${CP} $< $@

doc/Makefile.NetBSD

@@ -0,0 +1,5 @@
+SRCS+=		net.example.in
+
+.SUFFIXES:	.BSD.in
+.BSD.in:
+	${CP} $< $@

doc/net.example.Linux.in

@@ -350,7 +350,7 @@
 # By default we don't wait for wpa_supplicant to associate and authenticate.
 # If you need to change this behaviour then you don't know how our scripts work
 # and setting this value could cause strange things to happen.
-# If you would like it to wait, you can specify how long in seconds.
+# If you would like to, so can specify how long in seconds.
 #associate_timeout_eth0=60
 # A value of 0 means wait forever.
 
@@ -581,18 +581,6 @@
 # NOTE: depend functions only work in /etc/conf.d/net
 # and not in profile configs such as /etc/conf.d/net.foo
 
-# MAC-VLAN support
-# The following configuration can be used to create a new interface 'macvlan0'
-# linked to 'eth0'
-#macvlan_macvlan0="eth0"
-
-# MAC-VLAN mode (private, vepa, bridge, passtru)
-#mode_macvlan0="private"
-
-# IP address, MAC address, ... are configured as a normal interface
-#config_macvlan0="192.168.20.20/24"
-#mac_macvlan0="00:50:06:20:20:20"
-
 #-----------------------------------------------------------------------------
 # Bonding
 # For link bonding/trunking on 2.4 kernels, or kernels without sysfs
@@ -839,9 +827,9 @@
 
 # Below is an example of configuring the bridge
 # Consult "man brctl" for more details
-#brctl_br0="setfd 15
-#sethello 2
-#stp on"
+#brctl_br0="setfd 0
+#sethello 0
+#stp off"
 
 # You can also configure the bridge or bridge members via sysfs on 2.6 kernels
 # or newer. See the kernel bridge documentation for a description of these

etc/Makefile

@@ -1,33 +1,17 @@
 DIR=	${SYSCONFDIR}
-SRCS=	rc.conf.in rc.in rc.shutdown.in
-BIN=	${BIN-${OS}}
-CONF=	rc.conf ${BIN-${OS}}
+CONF=	rc.conf
 
 CLEANFILES+=	rc.conf
 
 MK=	../mk
 include ${MK}/os.mk
-
-SED_EXTRA-FreeBSD=	-e 's:@TERM@:cons25:g'
-BIN-FreeBSD=		rc rc.shutdown rc.devd
-CONF-FreeBSD=		devd.conf
-
-SED_EXTRA-Linux=	-e 's:@TERM@:wsvt25:g'
-BIN-Linux=
-CONF-Linux=
-
-SED_EXTRA-NetBSD=	-e 's:@TERM@:wsvt25:g'
-BIN-NetBSD=		rc rc.shutdown
-CONF-NetBSD=
-
-SED_EXTRA=	${SED_EXTRA-${OS}}
-
+include Makefile.${OS}
 include ${MK}/scripts.mk
 
 # We can't use "ifndef" here because that treats set-but-empty
 # as not-set which is not what we want
 MKRCSYS ?= automagicplease
-ifeq (${MKRCSYS},automagicplease)
+ifeq ($(MKRCSYS),automagicplease)
 # If the user isn't picking a default, then have the
 # config go with runtime automagic detection #357247
 rc.conf: SED_EXTRA += -e '/^rc_sys=""/s:^:\#:'

etc/Makefile.FreeBSD

@@ -0,0 +1,4 @@
+SED_EXTRA=	-e 's:@TERM@:cons25:g'
+SRCS+=		rc.conf.in rc.in rc.shutdown.in
+CONF+=		devd.conf
+BIN+=		rc rc.shutdown rc.devd

etc/Makefile.Linux

@@ -0,0 +1,2 @@
+SED_EXTRA=	-e 's:@TERM@:wsvt25:g'
+SRCS+=		rc.conf.in rc.in rc.shutdown.in

etc/Makefile.NetBSD

@@ -0,0 +1,3 @@
+SED_EXTRA=	-e 's:@TERM@:wsvt25:g'
+SRCS+=		rc.conf.in rc.in rc.shutdown.in
+BIN+=		rc rc.shutdown

etc/rc.conf.in

@@ -47,10 +47,6 @@
 # logging can take place and as such cannot log the sysinit runlevel.
 #rc_logger="YES"
 
-# Through rc_log_path you can specify a custom log file.
-# The default value is: /var/log/rc.log
-#rc_log_path="/var/log/rc.log"
-
 # By default we filter the environment for our running scripts. To allow other
 # variables through, add them here. Use a * to allow all variables through.
 #rc_env_allow="VAR1 VAR2"

etc/rc.devd

@@ -1,6 +1,6 @@
 #!/bin/sh
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 # Inform RC that we are in the background and hotplugged
 export IN_BACKGROUND=yes

etc/rc.in

@@ -1,6 +1,6 @@
 #!@SHELL@
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)

etc/rc.shutdown.in

@@ -1,6 +1,6 @@
 #!@SHELL@
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 # Handle interrupts
 trap : SIGINT SIGQUIT

init.d.misc/Makefile

@@ -7,5 +7,5 @@ MK=	../mk
 
 SED_EXTRA+= -e 's:@VARBASE@:/var:g'
 
-include ${MK}/os.mk
 include ${MK}/scripts.mk
+include Makefile.${OS}

init.d.misc/Makefile.FreeBSD

@@ -0,0 +1 @@
+PKG_PREFIX?=	/usr/local

init.d.misc/Makefile.Linux

@@ -0,0 +1 @@
+PKG_PREFIX?=/usr

init.d.misc/Makefile.NetBSD

@@ -0,0 +1 @@
+PKG_PREFIX?=	/usr/pkg

init.d.misc/avahi-dnsconfd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/avahi-dnsconfd
 command_args="$avahi_dnsconfd_args -D"

init.d.misc/avahid.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/avahi-daemon
 command_args="$avahid_args -D"

init.d.misc/dbus.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/bin/dbus-daemon
 pidfile=@VARBASE@/run/dbus/pid

init.d.misc/dhcpcd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=/sbin/dhcpcd
 pidfile=/var/run/dhcpcd.pid

init.d.misc/dnsmasq.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/dnsmasq
 command_args=$dnsmasq_args

init.d.misc/hald.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/hald
 pidfile=@VARBASE@/run/hald/hald.pid

init.d.misc/named.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/named
 command_args=$named_args

init.d.misc/ntpd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 : ${ntpd_config:=/etc/ntp.conf}
 : ${ntpd_drift:=/var/db/ntpd.drift}

init.d.misc/openvpn.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 vpn=${RC_SVCNAME#*.}
 name="OpenVPN"

init.d.misc/polkitd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/polkitd
 pidfile=@VARBASE@/run/polkitd/polkitd.pid

init.d.misc/sshd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/sshd
 command_args=$sshd_args

init.d.misc/wpa_supplicant.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/wpa_supplicant
 : ${wpa_supplicant_conf:=/etc/wpa_supplicant.conf}

init.d/Makefile

@@ -1,42 +1,25 @@
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
 	network.in root.in savecache.in staticroute.in swap.in swclock.in \
-	sysctl.in urandom.in ${SRCS-${OS}}
+	sysctl.in urandom.in
 BIN=	${OBJS}
 
-INSTALLAFTER=	_installafter_net.lo
-CLEANFILES+=	net.lo
-TARGETS+=	net.lo
+# Build our old net foo or not
+ifeq (${MKOLDNET},yes)
+_OLDNET=	net.lo
+endif
+_NET_LO=	${_OLDNET}
+
+INSTALLAFTER=	_installafter_${_NET_LO}
+CLEANFILES+=	${_NET_LO}
+TARGETS+=	${_NET_LO}
 
 MK=	../mk
 include ${MK}/os.mk
-
-NET_LO-FreeBSD=	net.lo0
-# Generic BSD scripts
-SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-		rpcbind.in savecore.in syslogd.in
-# These are FreeBSD specific
-SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in ipfw.in mixer.in nscd.in \
-		powerd.in syscons.in
-
-NET_LO-Linux=	net.lo
-SRCS-Linux=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
-		killprocs.in modules.in mount-ro.in mtab.in numlock.in \
-		procfs.in sysfs.in termencoding.in migrate-run.in
-
-NET_LO-NetBSD=	net.lo0
-# Generic BSD scripts
-SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-		rpcbind.in savecore.in syslogd.in
-# These are NetBSD specific
-SRCS-NetBSD+=	devdb.in swap-blk.in ttys.in wscons.in
-
-%.in: %${SFX}
-	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@
-
+include Makefile.${OS}
 include ${MK}/scripts.mk
 
 _installafter_: realinstall
 
 _installafter_net.lo: realinstall
-	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO-${OS}}
+	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO}

init.d/Makefile.FreeBSD

@@ -0,0 +1,13 @@
+NET_LO=	net.lo0
+
+# Generic BSD scripts
+SRCS+=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
+	rpcbind.in savecore.in syslogd.in
+
+# These are FreeBSD specific
+SRCS+=	adjkerntz.in devd.in dumpon.in ipfw.in mixer.in nscd.in \
+	powerd.in syscons.in
+
+.SUFFIXES:	.BSD.in
+.BSD.in:
+	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/Makefile.Linux

@@ -0,0 +1,9 @@
+NET_LO=	net.lo
+
+SRCS+=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in killprocs.in \
+	modules.in mount-ro.in mtab.in numlock.in procfs.in sysfs.in \
+	termencoding.in
+
+.SUFFIXES:	.Linux.in
+.Linux.in:
+	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/Makefile.NetBSD

@@ -0,0 +1,12 @@
+NET_LO=	net.lo0
+
+# Generic BSD scripts
+SRCS+=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
+	rpcbind.in savecore.in syslogd.in
+
+# These are NetBSD specific
+SRCS+=	devdb.in swap-blk.in ttys.in wscons.in
+
+.SUFFIXES:	.BSD.in
+.BSD.in:
+	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/adjkerntz.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 extra_commands="save"
 

init.d/bootmisc.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {
@@ -10,13 +10,12 @@ depend()
 	keyword -prefix -timeout
 }
 
-dir_writable()
+dir_writeable()
 {
 	mkdir "$1"/.test.$$ 2>/dev/null && rmdir "$1"/.test.$$
 }
 
 : ${wipe_tmp:=${WIPE_TMP:-yes}}
-: ${log_dmesg:=${LOG_DMESG:-yes}}
 
 cleanup_tmp_dir()
 {
@@ -25,7 +24,7 @@ cleanup_tmp_dir()
 	if ! [ -d "$dir" ]; then
 		mkdir -p "$dir" || return $?
 	fi
-	dir_writable "$dir" || return 1
+	dir_writeable "$dir" || return 1
 	chmod a+rwt "$dir" 2> /dev/null
 	cd "$dir" || return 1
 	if yesno $wipe_tmp; then
@@ -69,7 +68,7 @@ mkutmp()
 	: >"$1"
 	# Not all systems have the utmp group
 	chgrp utmp "$1" 2>/dev/null
-	chmod 0664 "$1"
+	chmod 0660 "$1"
 }
 
 start()
@@ -89,7 +88,7 @@ start()
 		fi
 	done
 
-	if dir_writable /var/run; then
+	if dir_writeable /var/run; then
 		ebegin "Creating user login records"
 		local xtra=
 		[ "$RC_UNAME" = NetBSD ] && xtra=x
@@ -131,7 +130,7 @@ start()
 		cleanup_tmp_dir "$tmp"
 	done
 
-	if dir_writable /tmp; then
+	if dir_writeable /tmp; then
 		# Make sure our X11 stuff have the correct permissions
 		# Omit the chown as bootmisc is run before network is up
 		# and users may be using lame LDAP auth #139411
@@ -143,13 +142,11 @@ start()
 		fi
 	fi
 
-	if yesno $log_dmesg; then
-		if $logw || dir_writable /var/log; then
-			# Create an 'after-boot' dmesg log
-			if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ ]; then
-				dmesg > /var/log/dmesg
-				chmod 640 /var/log/dmesg
-			fi
+	if $logw || dir_writeable /var/log; then
+		# Create an 'after-boot' dmesg log
+		if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ ]; then
+			dmesg > /var/log/dmesg
+			chmod 640 /var/log/dmesg
 		fi
 	fi
 

init.d/consolefont.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Sets a font for the consoles."
 
@@ -49,7 +49,7 @@ start()
 			retval=1
 			break
 		fi
-		: $(( x += 1 ))
+		x=$(($x + 1))
 	done
 	eend $retval
 

init.d/devd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=/sbin/devd
 command_args=$devd_args

init.d/devdb.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Creates the dev database"
 
@@ -11,7 +11,7 @@ depend()
 
 start()
 {
-	ebegin "Building the dev database"
+	ebegin "Bulding the dev database"
 	if [ /var/run/dev.db -nt /dev ]; then
 		:
 	else

init.d/devfs.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Mount system critical filesystems in /dev."
 

init.d/dmesg.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Set the dmesg level for a cleaner boot"
 

init.d/dumpon.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Configures a specific kernel dump device."
 
@@ -19,7 +19,7 @@ start() {
 }
 
 stop() {
-	ebegin "Deactivating kernel core dump device"
+	ebegin "Deactiving kernel core dump device"
 	dumpon off
 	eend $?
 }

init.d/fsck.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Check and repair filesystems according to /etc/fstab"
 _IFS="
@@ -48,13 +48,8 @@ start()
 
 	if [ -n "$fsck_passno" ]; then
 		check_extra="[passno $fsck_passno] $check_extra"
-		if -n "$fsck_mnt" ]; then
-			eerror "Only 1 of fsck_passno and fsck_mnt must be set!"
-			return 1
-		fi
 	fi
 	ebegin "Checking local filesystems $check_extra"
-	# Append passno mounts
 	for p in $fsck_passno; do
 		local IFS="$_IFS"
 		case "$p" in
@@ -63,16 +58,10 @@ start()
 		set -- "$@" $(fstabinfo --passno "$p")
 		unset IFS
 	done
-	# Append custom mounts
-	for m in $fsck_mnt ; do
-		local IFS="$_IFS"
-		set -- "$@" "$m"
-		unset IFS
-	done
 
 	if [ "$RC_UNAME" = Linux ]; then
 		fsck_opts="$fsck_opts -C0 -T"
-		if [ -z "$fsck_passno" -a -z "$fsck_mnt" ]; then
+		if [ -z "$fsck_passno" ]; then
 			fsck_args=${fsck_args--A -p}
 			if echo 2>/dev/null >/.test.$$; then
 				rm -f /.test.$$
@@ -102,7 +91,7 @@ start()
 			_reboot
 		fi;;
 	8)	ewend 1 "Operational error"; return 0;;
-	12)	ewend 1 "fsck interrupted";;
+	12)	ewend 1 "fsck interupted";;
 	*)	eend 2 "Filesystems couldn't be fixed";;
 	esac
 	_abort || return 1

init.d/hostid.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 extra_commands="reset"
 : ${hostid_file:=/etc/hostid}

init.d/hostname.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Sets the hostname of the machine."
 

init.d/hwclock.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 extra_commands="save show"
 
@@ -85,7 +85,7 @@ start()
 
 	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
 		_hwclock --adjust $utc_cmd
-		: $(( retval += $? ))
+		retval=$(($retval + $?))
 	fi
 
 	# If setting UTC, don't bother to run hwclock when first booting
@@ -99,7 +99,7 @@ start()
 		else
 			_hwclock --systz $utc_cmd $clock_args
 		fi
-		: $(( retval += $? ))
+		retval=$(($retval + $?))
 	fi
 
 	eend $retval "Failed to set the system clock"

init.d/ipfw.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 # This is based on /etc/rc.firewall and /etc/rc.firewall6 from FreeBSD
 
@@ -59,7 +59,7 @@ start() {
 		return 1
 	fi
 
-	# Use a stateful firewall
+	# Use a statefull firewall
 	ipfw add check-state
 	ipfw add pass tcp from me to any established
 
@@ -123,7 +123,7 @@ start() {
 	ipfw add deny udp from any to any 520 in
 
 	# Noise from webbrowsing.
-	# The stateful filter is a bit aggressive, and will cause some
+	# The statefull filter is a bit agressive, and will cause some
 	# connection teardowns to be logged.
 	ipfw add deny tcp from any 80,443 to any 1024-65535 in
 

init.d/keymaps.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Applies a keymap for the consoles."
 
@@ -47,7 +47,7 @@ start()
 	n=1
 	while [ $n -le $ttyn ]; do
 		kbd_mode $kmode -C $ttydev$n
-		: $(( n += 1 ))
+		n=$(($n + 1))
 	done
 	eend 0
 

init.d/killprocs.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Kill all processes so we can unmount disks cleanly."
 
@@ -12,11 +12,11 @@ depend()
 start()
 {
 	ebegin "Terminating remaining processes"
-	killall5 -15 ${killall5_opts}
+	killall5 -15
 	sleep 1
 	eend 0
 	ebegin "Killing remaining processes"
-	killall5 -9 ${killall5_opts}
+	killall5 -9
 	sleep 1
 	eend 0
 }

init.d/local.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Executes user programs in @SYSCONFDIR@/local.d"
 

init.d/localmount.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Mounts disks and swap according to /etc/fstab."
 
@@ -16,7 +16,7 @@ start()
 {
 	# Mount local filesystems in /etc/fstab.
 	local types="noproc" x= no_netdev=
-	for x in $net_fs_list $extra_net_fs_list; do
+	for x in $net_fs_list; do
 		types="${types},${x}"
 	done
 
@@ -34,17 +34,19 @@ start()
 stop()
 {
 	# We never unmount / or /dev or $RC_SVCDIR
-
-	# Bug 381783
-	local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
-
-	local x= no_umounts_r="/|/dev|/dev/.*|${rc_svcdir}"
-	no_umounts_r="${no_umounts_r}|/bin|/sbin|/lib(32|64)?|/libexec"
+	local x= no_umounts_r="/|/dev|/dev/.*|${RC_SVCDIR}"
+	no_umounts_r="${no_umounts_r}|/bin|/sbin|/lib|/libexec"
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
-	local IFS="$IFS:"
+	OIFS=$IFS SIFS=${IFS-y}
+	IFS=$IFS:
 	for x in $no_umounts $RC_NO_UMOUNTS; do
 		no_umounts_r="$no_umounts_r|$x"
 	done
+	if [ "$SIFS" = y ]; then
+		IFS=$OIFS
+	else
+		unset IFS
+	fi
 
 	if [ "$RC_UNAME" = Linux ]; then
 		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*"
@@ -68,12 +70,12 @@ stop()
 	einfo "Unmounting filesystems"
 	eindent
 	local fs=
-	for x in $net_fs_list $extra_net_fs_list; do
+	for x in $net_fs_list; do
 		fs="$fs${fs:+|}$x"
 	done
 	[ -n "$fs" ] && fs="^($fs)$"
 	do_unmount umount --skip-point-regex "$no_umounts_r" \
-		"${fs:+--skip-fstype-regex}" $fs --nonetdev
+		${fs:+--skip-fstype-regex} $fs --nonetdev
 	eoutdent
 
 	return 0

init.d/migrate-run.in

@@ -1,28 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright 1999-2011 Gentoo Foundation
-# Released under the 2-clause BSD license.
-
-description="Migrate /var/run and /var/lock to /run"
-
-depend()
-{
-	before *
-	after localmount
-}
-
-start()
-{
-	return 0
-}
-
-stop()
-{
-	if [ -d /run -a ! -L /var/lock -a ! -L /var/run ]; then
-		ebegin "Migrating /var/lock and /var/run to /run"
-		rm -rf /var/lock /var/run
-		ln -s /var/lock /run/lock
-		ln -s /var/run /run
-		eend 0
-	fi
-	return 0
-}

init.d/mixer.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 extra_commands="restore"
 
@@ -21,7 +21,7 @@ restore()
 			mixer -f "$mixer" \
 			$(cat "/var/db/${mixer#/dev/}-state") >/dev/null
 			veend $?
-			: $(( retval += $? ))
+			: $((retval += $?))
 		fi
 	done
 }
@@ -40,7 +40,7 @@ stop()
 		vebegin "$mixer"
 		mixer -f "$mixer" -s >/var/db/"${mixer#/dev/}"-state
 		veend $?
-		: $(( retval += $? ))
+		: $((retval += $?))
 	done
 	eoutdent
 	eend $retval

init.d/modules.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Loads a user defined list of kernel modules."
 
@@ -16,21 +16,18 @@ start()
 	# support compiled in ...
 	[ ! -f /proc/modules ] && return 0
 
-	local KV x y kv_variant_list
-	KV=$(uname -r)
-	# full $KV
-	kv_variant_list="${KV}"
-	# remove any KV_EXTRA options to just get the full version
-	x=${KV%%-*}
-	# now slowly strip them
-	while [ -n "$x" ] && [ "$x" != "$y" ]; do
-		kv_variant_list="${kv_variant_list} $x"
-		y=$x
-		x=${x%.*}
-	done
+	local KV=$(uname -r)
+	local KV_MAJOR=${KV%%.*}
+	local x=${KV#*.}
+	local KV_MINOR=${x%%.*}
+	x=${KV#*.*.}
+	local KV_MICRO=${x%%-*}
 
 	local list= x= xx= y= args= mpargs= cnt=0 a=
-	for x in $kv_variant_list ; do
+	for x in "$KV" \
+		$KV_MAJOR.$KV_MINOR.$KV_MICRO \
+		$KV_MAJOR.$KV_MINOR \
+	; do
 		eval list=\$modules_$(shell_var "$x")
 		[ -n "$list" ] && break
 	done
@@ -48,7 +45,10 @@ start()
 		fi
 		aa=$(shell_var "$a")
 		xx=$(shell_var "$x")
-		for y in $kv_variant_list ; do
+		for y in "$KV" \
+			$KV_MAJOR.$KV_MINOR.$KV_MICRO \
+			$KV_MAJOR.$KV_MINOR \
+		; do
 			eval args=\$module_${aa}_args_$(shell_var "$y")
 			[ -n "${args}" ] && break
 			eval args=\$module_${xx}_args_$(shell_var "$y")
@@ -57,7 +57,7 @@ start()
 		[ -z "$args" ] && eval args=\$module_${aa}_args
 		[ -z "$args" ] && eval args=\$module_${xx}_args
 		eval modprobe -q "$mpargs" "$x" "$args"
-		eend $? "Failed to load $x" && : $(( cnt += 1 ))
+		eend $? "Failed to load $x" && cnt=$(($cnt + 1))
 	done
 	einfo "Autoloaded $cnt module(s)"
 }

init.d/mount-ro.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Re-mount filesytems read-only for a clean reboot."
 
@@ -19,26 +19,28 @@ start()
 	# We need the do_unmount function
 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 	eindent
-
-	# Bug 381783
-	local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
-
-	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|${rc_svcdir}" x= fs=
-	m="$m|/bin|/sbin|/lib(32|64)?|/libexec"
+	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|${RC_SVCDIR}" x= fs=
+	m="$m|/bin|/sbin|/lib|/libexec"
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
-	local IFS="$IFS:"
+	local OIFS=$IFS SIFS=${IFS-y} IFS=$IFS
+	IFS=$IFS:
 	for x in $no_umounts $RC_NO_UMOUNTS; do
 		m="$m|$x"
 	done
+	if [ "$SIFS" = y ]; then
+		IFS=$OIFS
+	else
+		unset IFS
+	fi
 	m="^($m)$"
 	fs=
-	for x in $net_fs_list $extra_net_fs_list; do
+	for x in $net_fs_list; do
 		fs="$fs${fs:+|}$x"
 	done
 	[ -n "$fs" ] && fs="^($fs)$"
 	do_unmount "umount -r" \
 		--skip-point-regex "$m" \
-		"${fs:+--skip-fstype-regex}" $fs --nonetdev
+		${fs:+--skip-fstype-regex} $fs --nonetdev
 	eoutdent
 	eend $?
 }

init.d/moused.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 mouse=${RC_SVCNAME##*.}
 if [ -n "$mouse" -a "$mouse" != "moused" ]; then
@@ -54,7 +54,7 @@ start()
 		local ttyv=
 		for ttyv in /dev/ttyv*; do
 			vidcontrol < "$ttyv" -m on
-			: $(( retval += $? ))
+			: $((retval+= $?))
 		done
 	fi
 

init.d/mtab.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Update /etc/mtab to match what the kernel knows about"
 
@@ -12,9 +12,9 @@ depend()
 
 start()
 {
-	if [ -L /etc/mtab ]
-	then
-		einfo "Skipping mtab update (mtab is a symbolic link)"
+	# /etc/mtab could be a symlink to /proc/mounts
+	if [ ! -w /etc/mtab -a -L /etc/mtab ]; then
+		eeinfo "Skipping mtab update (non writeable symlink)"
 		return 0
 	fi
 

init.d/net.lo.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 MODULESDIR="${RC_LIBEXECDIR}/net"
 MODULESLIST="${RC_SVCDIR}/nettree"
@@ -42,25 +42,12 @@ depend()
 }
 
 # Support bash arrays - sigh
-_array_helper()
-{
-	local _a=
-
-	eval _a=\$$1
-	_a=$(echo "${_a}" | sed -e 's:^[[:space:]]*::' -e 's:[[:space:]]*$::' -e '/^$/d' -e 's:[[:space:]]\{1,\}: :g')
-
-	[ -n "${_a}" ] && printf "%s\n" "${_a}"
-}
-
 _get_array()
 {
 	local _a=
 	if [ -n "${BASH}" ]; then
 		case "$(declare -p "$1" 2>/dev/null)" in
 			"declare -a "*)
-				ewarn "You are using a bash array for $1."
-				ewarn "This feature will be removed in the future."
-				ewarn "Please see net.example for the correct format for $1."
 				eval "set -- \"\${$1[@]}\""
 				for _a; do
 					printf "%s\n" "${_a}"
@@ -70,7 +57,10 @@ _get_array()
 		esac
 	fi
 
-	_array_helper $1
+	eval _a=\$$1
+	printf "%s" "${_a}"
+	printf "\n"
+	[ -n "${_a}" ]
 }
 
 # Flatten bash arrays to simple strings
@@ -79,9 +69,6 @@ _flatten_array()
 	if [ -n "${BASH}" ]; then
 		case "$(declare -p "$1" 2>/dev/null)" in
 			"declare -a "*)
-				ewarn "You are using a bash array for $1."
-				ewarn "This feature will be removed in the future."
-				ewarn "Please see net.example for the correct format for $1."
 				eval "set -- \"\${$1[@]}\""
 				for x; do
 					printf "'%s' " "$(printf "$x" | sed "s:':'\\\'':g")"
@@ -91,7 +78,10 @@ _flatten_array()
 		esac
 	fi
 
-	_array_helper $1
+	eval _a=\$$1
+	printf "%s" "${_a}"
+	printf "\n"
+	[ -n "${_a}" ]
 }
 
 _wait_for_carrier()
@@ -115,7 +105,7 @@ _wait_for_carrier()
 			eend 0
 			return 0
 		fi
-		: $(( timeout -= 1 ))
+		timeout=$((${timeout} - 1))
 		[ "${efunc}" = "einfon" ] && printf "."
 	done
 
@@ -144,9 +134,9 @@ _netmask2cidr()
 	local i= len=
 	local IFS=.
 	for i in $1; do
-		while [ ${i} -ne 0 ]; do
-			: $(( len += i % 2 ))
-			: $(( i >>= 1 ))
+		while [ ${i} != "0" ]; do
+			len=$((${len} + ${i} % 2))
+			i=$((${i} >> 1))
 		done
 	done
 
@@ -277,7 +267,7 @@ _gen_module_list()
 		echo "module_${i}_program_start='${PROGRAM_START}'" >> "${MODULESLIST}"
 		echo "module_${i}_program_stop='${PROGRAM_STOP}'" >> "${MODULESLIST}"
 		echo "module_${i}_provide='${PROVIDE}'" >> "${MODULESLIST}"
-		: $(( i += 1 ))
+		i=$((${i} + 1))
 	done
 	echo "module_${i}=" >> "${MODULESLIST}"
 	)
@@ -304,7 +294,7 @@ _load_modules()
 
 	local i=-1 x= mod= f= provides=
 	while true; do
-		: $(( i += 1 ))
+		i=$((${i} + 1))
 		eval mod=\$module_${i}
 		[ -z "${mod}" ] && break
 		[ -e "${MODULESDIR}/${mod}.sh" ] || continue
@@ -438,7 +428,7 @@ _load_config()
 	# so modules can influence it
 	for cmd; do
 		eval config_${config_index}="'${cmd}'"
-		: $(( config_index += 1 ))
+		config_index=$((${config_index} + 1))
 	done
 	# Terminate the list
 	eval config_${config_index}=
@@ -446,7 +436,7 @@ _load_config()
 	config_index=0
 	for cmd in ${fallback}; do
 		eval fallback_${config_index}="'${cmd}'"
-		: $(( config_index += 1 ))
+		config_index=$((${config_index} + 1))
 	done
 	# Terminate the list
 	eval fallback_${config_index}=
@@ -541,7 +531,7 @@ start()
 	if [ -n "${our_metric}" ]; then
 		metric=${our_metric}
 	elif [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
-		: $(( metric += $(_ifindex) ))
+		metric=$((${metric} + $(_ifindex)))
 	fi
 
 	while true; do
@@ -549,9 +539,7 @@ start()
 		[ -z "${config}" ] && break
 
 		set -- ${config}
-		if [ "$1" != "null" -a "$1" != "noop" ]; then
-			ebegin "$1"
-		fi
+		ebegin "$1"
 		eindent
 		case "$1" in
 			noop)
@@ -581,11 +569,11 @@ start()
 				eindent
 				eval config_${config_index}=\$config
 				unset fallback_${config_index}
-				: $(( config_index -= 1 ))
+				config_index=$((${config_index} - 1))
 			fi
 		fi
 		eoutdent
-		: $(( config_index += 1 ))
+		config_index=$((${config_index} + 1))
 	done
 
 	if ! ${oneworked}; then

init.d/netmount.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Mounts network shares according to /etc/fstab."
 
@@ -44,7 +44,7 @@ start()
 	[ -x @SYSCONFDIR@/init.d/rpcbind ] && pmap="rpcbind"
 
 	local x= fs= rc=
-	for x in $net_fs_list $extra_net_fs_list; do
+	for x in $net_fs_list; do
 		case "$x" in
 			nfs|nfs4)
 			# If the nfsmount script took care of the nfs
@@ -81,7 +81,7 @@ stop()
 	ebegin "Unmounting network filesystems"
 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 
-	for x in $net_fs_list $extra_net_fs_list; do
+	for x in $net_fs_list; do
 		fs="$fs${fs:+,}$x"
 	done
 	if [ -n "$fs" ]; then
@@ -90,7 +90,7 @@ stop()
 
 	eindent
 	fs=
-	for x in $net_fs_list $extra_net_fs_list; do
+	for x in $net_fs_list; do
 		fs="$fs${fs:+|}$x"
 	done
 	[ -n "$fs" ] && fs="^($fs)$"

init.d/network.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 # This script was inspired by the equivalent rc.d network from NetBSD.
 
@@ -219,12 +219,6 @@ start()
 		eend $?
 	fi
 
-	ewarn
-	ewarn "The $RC_SVCNAME script is deprecated and will be"
-	ewarn "removed in the future."
-	ewarn "Please use the net.* scripts to manage your network interfaces."
-	ewarn
-
 	einfo "Starting network"
 	routeflush
 	if [ "$RC_UNAME" = "Linux" ]; then
@@ -287,7 +281,7 @@ start()
 		tentative || break
 		[ $r = 5 ] && vebegin "Waiting for tentative addresses"
 		sleep 1
-		: $(( r -= 1 ))
+		r=$(($r - 1))
 	done
 	if [ $r != 5 ]; then
 		[ $r != 0 ]

init.d/newsyslog.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 required_files="/etc/newsyslog.conf"
 

init.d/nscd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/nscd
 command_args=$nscd_args

init.d/numlock.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Turns numlock on for the consoles."
 
@@ -21,7 +21,7 @@ _setleds()
 
 	while [ $i -le $ttyn ]; do
 		setleds -D "$1"num < $dev$i || retval=1
-		: $(( i += 1 ))
+		i=$(($i + 1))
 	done
 
 	return $retval

init.d/pf.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 name="Packet Filter"
 : ${pf_conf:=${pf_rules:-/etc/pf.conf}}

init.d/powerd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/powerd
 command_args=$powerd_args

init.d/procfs.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Mounts misc filesystems in /proc."
 
@@ -37,24 +37,24 @@ start()
 		fi
 	fi
 
+	# Setup Kernel Support for the NFS daemon status
+	if [ -d /proc/fs/nfsd ] && ! mountinfo -q /proc/fs/nfsd; then
+		if grep -qs nfsd /proc/filesystems; then
+			ebegin "Mounting NFS filesystem"
+			mount -t nfsd -o nodev,noexec,nosuid \
+				nfsd /proc/fs/nfsd
+			eend $?
+		fi
+	fi
+
 	# Setup Kernel Support for miscellaneous Binary Formats
-	if [ -d /proc/sys/fs/binfmt_misc -a ! -e /proc/sys/fs/binfmt_misc/register ]; then
+	if [ -d /proc/sys/fs/binfmt_misc ] \
+		&& ! mountinfo -q /proc/sys/fs/binfmt_misc; then
 		if grep -qs binfmt_misc /proc/filesystems; then
 			ebegin "Mounting misc binary format filesystem"
 			mount -t binfmt_misc -o nodev,noexec,nosuid \
 				binfmt_misc /proc/sys/fs/binfmt_misc
-			if eend $? ; then
-				local fmts
-				ebegin "Loading custom binary format handlers"
-				fmts=$(grep -hsv -e '^[#;]' -e '^[[:space:]]*$' \
-					/run/binfmt.d/*.conf \
-					"/etc"/binfmt.d/*.conf \
-					""/usr/lib/binfmt.d/*.conf)
-				if [ -n "${fmts}" ]; then
-					echo "${fmts}" > /proc/sys/fs/binfmt_misc/register
-				fi
-				eend $?
-			fi
+			eend $?
 		fi
 	fi
 

init.d/rarpd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/rarpd
 command_args="-f $rarpd_args"

init.d/rc-enabled.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {
@@ -33,7 +33,7 @@ start()
 
 		# Good to go!
 		"$svc" start && started="$started $svc"
-		: $(( retval += $? ))
+		: $((retval += $?))
 	done
 	service_set_value started "$started"
 	eend $retval "Some local rc services failed to start"
@@ -46,7 +46,7 @@ stop()
 	local svc= retval=0
 	for svc in $(rcorder $(service_get_value started) 2>/dev/null | sort -r); do
 		"$svc" stop
-		: $(( retval += $? ))
+		: $((retval += $?))
 	done
 	eend $retval "Some local rc services failed to stop"
 	return 0

init.d/root.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Mount the root fs read/write"
 

init.d/rpcbind.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/rpcbind
 command_args=$rpcbind_args

init.d/savecache.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Saves the caches OpenRC uses to non volatile storage"
 

init.d/savecore.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Saves a kernel dump."
 

init.d/staticroute.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 # This script was inspired by the equivalent rc.d staticroute from NetBSD.
 
@@ -93,11 +93,6 @@ do_routes()
 
 start()
 {
-	ewarn
-	ewarn "The $RC_SVCNAME script is deprecated and will be"
-	ewarn "removed in the future."
-	ewarn "Please use the net.* scripts to manage your network interfaces."
-	ewarn
 	do_routes "Adding" "add"
 }
 

init.d/swap-blk.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {

init.d/swap.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {

init.d/swclock.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Sets the local clock to the mtime of a given file."
 
@@ -16,9 +16,7 @@ depend()
 start()
 {
 	ebegin "Setting the local clock based on last shutdown time"
-	if ! swclock 2> /dev/null; then
-	swclock --warn @PREFIX@/sbin/runscript
-	fi
+	swclock --warn
 	eend $?
 }
 

init.d/syscons.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 depend() {
 	need localmount

init.d/sysctl.BSD.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {

init.d/sysctl.Linux.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {
@@ -10,25 +10,16 @@ depend()
 
 start()
 {
-	local conf= retval=0 err errs
-
+	local conf= retval=0
 	ebegin "Configuring kernel parameters"
 	eindent
-
 	for conf in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
 		if [ -r "$conf" ]; then
 			vebegin "applying $conf"
-			if ! err=$(sysctl -q -p "$conf" 2>&1) ; then
-				errs="${errs} ${err}"
-				sysctl -q -e -p "${conf}"
-			fi
+			sysctl -p "$conf" >/dev/null
 			veend $? || retval=1
 		fi
 	done
-
 	eoutdent
-	if [ ${retval} -eq 0 ] && [ -n "${errs}" ] ; then
-		ewarn "Unknown keys:${errs}"
-	fi
-	eend $retval "Some errors were encountered: ${errs}"
+	eend $retval "Some errors were encountered"
 }

init.d/sysfs.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Mount the sys filesystem."
 
@@ -50,37 +50,6 @@ mount_misc()
 			eend $?
 		fi
 	fi
-
-	# Setup Kernel Support for configfs
-	if [ -d /sys/kernel/config ] && ! mountinfo -q /sys/kernel/config; then
-		if grep -qs configfs /proc/filesystems; then
-			ebegin "Mounting config filesystem"
-			mount -n -t configfs -o  nodev,noexec,nosuid \
-				configfs /sys/kernel/config
-			eend $?
-		fi
-	fi
-
-	# Setup Kernel Support for cgroup
-	if [ -d /sys/fs/cgroup ]; then
-		if grep -qs cgroup /proc/filesystems && \
-			! mountinfo -q /sys/fs/cgroup; then
-			ebegin "Mounting cgroup filesystem"
-			mount -n -t tmpfs -o  nodev,noexec,nosuid \
-				cgroup /sys/fs/cgroup
-			eend $?
-		fi
-		if ! mountinfo -q /sys/fs/cgroup/openrc; then
-			ebegin "creating openrc control group"
-			mkdir /sys/fs/cgroup/openrc
-			mount -n -t cgroup -o  nodev,noexec,nosuid \
-				openrc /sys/fs/cgroup/openrc
-			echo 1 > /sys/fs/cgroup/openrc/notify_on_release
-			echo @LIBEXECDIR@/sh/cgroup-release-agent.sh \
-				> /sys/fs/cgroup/openrc/release_agent
-			eend
-		fi
-	fi
 }
 
 start()

init.d/syslogd.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/syslogd
 command_args=$syslogd_args

init.d/termencoding.in

@@ -1,6 +1,6 @@
 #!@PREFIX@/sbin/runscript
 # Copyright (c) 2008-2009 Roy Marples <roy@marples.name>
-# Released under the 2-clause BSD license.
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Configures terminal encoding."
 
@@ -31,7 +31,7 @@ start()
 	n=1
 	while [ ${n} -le "$ttyn" ]; do
 		printf "\033%s" "$termencoding" >$ttydev$n
-		: $(( n += 1 ))
+		n=$(($n + 1))
 	done
 
 	# Save the encoding for use immediately at boot