completely refactor service generation

Far too many changes to list, but having a ton of redundant files like "type" were removed since they can be generated in the install script instead. cg support is also added to every longrun.
install.sh: use sed instead of cut
2024-04-26 12:30:33 -05:00 · 2024-03-14 19:56:04 -05:00 · 2024-03-14 19:37:31 -05:00 · 2024-03-14 19:24:57 -05:00 · 2024-03-14 14:57:02 -05:00 · 2023-12-31 17:50:36 -06:00
1580 changed files with 1363 additions and 2642 deletions
--- a/acpid/acpid-log/consumer-for
+++ b/acpid/acpid-log/consumer-for
@@ -1 +0,0 @@
-acpid-srv
--- a/acpid/acpid-log/pipeline-name
+++ b/acpid/acpid-log/pipeline-name
@@ -1 +0,0 @@
-acpid
--- a/acpid/acpid-log/run
+++ b/acpid/acpid-log/run
@@ -1,9 +0,0 @@
-#!/bin/execlineb -P
-envfile /etc/s6/config/acpid.conf
-importas -sCuD "n3 s2000000 T" DIRECTIVES DIRECTIVES
-ifelse { test -w /var/log } {
-	foreground { install -d -o s6log -g s6log /var/log/acpid }
-	s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /var/log/acpid
-}
-foreground { install -d -o s6log -g s6log /run/log/acpid }
-s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /run/log/acpid
--- a/acpid/acpid-log/type
+++ b/acpid/acpid-log/type
@@ -1 +0,0 @@
-longrun
--- a/acpid/acpid-srv/producer-for
+++ b/acpid/acpid-srv/producer-for
@@ -1 +0,0 @@
-acpid-log
--- a/acpid/acpid-srv/type
+++ b/acpid/acpid-srv/type
@@ -1 +0,0 @@
-longrun
--- a/acpid/acpid.conf
+++ b/acpid/acpid.conf
@@ -1,2 +0,0 @@
-# This configures the directives used for s6-log in the log service.
-DIRECTIVES="n3 s2000000 T"
--- a/alsa-utils/alsa/type
+++ b/alsa-utils/alsa/type
@@ -1 +0,0 @@
-oneshot
--- a/apache/apache-log/consumer-for
+++ b/apache/apache-log/consumer-for
@@ -1 +0,0 @@
-apache-srv
--- a/apache/apache-log/pipeline-name
+++ b/apache/apache-log/pipeline-name
@@ -1 +0,0 @@
-apache
--- a/apache/apache-log/type
+++ b/apache/apache-log/type
@@ -1 +0,0 @@
-longrun
--- a/apache/apache-srv/producer-for
+++ b/apache/apache-srv/producer-for
@@ -1 +0,0 @@
-apache-log
--- a/apache/apache-srv/type
+++ b/apache/apache-srv/type
@@ -1 +0,0 @@
-longrun
--- a/apache/apache.conf
+++ b/apache/apache.conf
@@ -1,2 +0,0 @@
-# This configures the directives used for s6-log in the log service.
-DIRECTIVES="n3 s2000000 T"
--- a/apcupsd/apcupsd-log/consumer-for
+++ b/apcupsd/apcupsd-log/consumer-for
@@ -1 +0,0 @@
-apcupsd-srv
--- a/apcupsd/apcupsd-log/pipeline-name
+++ b/apcupsd/apcupsd-log/pipeline-name
@@ -1 +0,0 @@
-apcupsd
--- a/apcupsd/apcupsd-log/run
+++ b/apcupsd/apcupsd-log/run
@@ -1,9 +0,0 @@
-#!/bin/execlineb -P
-envfile /etc/s6/config/apcupsd.conf
-importas -sCuD "n3 s2000000 T" DIRECTIVES DIRECTIVES
-ifelse { test -w /var/log } {
-	foreground { install -d -o s6log -g s6log /var/log/apcupsd }
-	s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /var/log/apcupsd
-}
-foreground { install -d -o s6log -g s6log /run/log/apcupsd }
-s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /run/log/apcupsd
--- a/apcupsd/apcupsd-log/type
+++ b/apcupsd/apcupsd-log/type
@@ -1 +0,0 @@
-longrun
--- a/apcupsd/apcupsd-srv/producer-for
+++ b/apcupsd/apcupsd-srv/producer-for
@@ -1 +0,0 @@
-apcupsd-log
--- a/apcupsd/apcupsd-srv/type
+++ b/apcupsd/apcupsd-srv/type
@@ -1 +0,0 @@
-longrun
--- a/apcupsd/apcupsd.conf
+++ b/apcupsd/apcupsd.conf
@@ -1,2 +0,0 @@
-# This configures the directives used for s6-log in the log service.
-DIRECTIVES="n3 s2000000 T"
--- a/apparmor/apparmor/type
+++ b/apparmor/apparmor/type
@@ -1 +0,0 @@
-oneshot
--- a/at/at.conf
+++ b/at/at.conf
@@ -1,2 +0,0 @@
-# This configures the directives used for s6-log in the log service.
-DIRECTIVES="n3 s2000000 T"
--- a/at/atd-log/consumer-for
+++ b/at/atd-log/consumer-for
@@ -1 +0,0 @@
-atd-srv
--- a/at/atd-log/pipeline-name
+++ b/at/atd-log/pipeline-name
@@ -1 +0,0 @@
-atd
--- a/at/atd-log/run
+++ b/at/atd-log/run
@@ -1,9 +0,0 @@
-#!/bin/execlineb -P
-envfile /etc/s6/config/at.conf
-importas -sCuD "n3 s2000000 T" DIRECTIVES DIRECTIVES
-ifelse { test -w /var/log } {
-	foreground { install -d -o s6log -g s6log /var/log/atd }
-	s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /var/log/atd
-}
-foreground { install -d -o s6log -g s6log /run/log/atd }
-s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /run/log/atd
--- a/at/atd-log/type
+++ b/at/atd-log/type
@@ -1 +0,0 @@
-longrun
--- a/at/atd-srv/producer-for
+++ b/at/atd-srv/producer-for
@@ -1 +0,0 @@
-atd-log
--- a/at/atd-srv/type
+++ b/at/atd-srv/type
@@ -1 +0,0 @@
-longrun
--- a/atftp/atftp.conf
+++ b/atftp/atftp.conf
@@ -1,2 +0,0 @@
-# This configures the directives used for s6-log in the log service.
-DIRECTIVES="n3 s2000000 T"
--- a/atftp/atftpd-log/consumer-for
+++ b/atftp/atftpd-log/consumer-for
@@ -1 +0,0 @@
-atftpd-srv
--- a/atftp/atftpd-log/pipeline-name
+++ b/atftp/atftpd-log/pipeline-name
@@ -1 +0,0 @@
-atftpd
--- a/atftp/atftpd-log/run
+++ b/atftp/atftpd-log/run
@@ -1,9 +0,0 @@
-#!/bin/execlineb -P
-envfile /etc/s6/config/atftp.conf
-importas -sCuD "n3 s2000000 T" DIRECTIVES DIRECTIVES
-ifelse { test -w /var/log } {
-	foreground { install -d -o s6log -g s6log /var/log/atftpd }
-	s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /var/log/atftpd
-}
-foreground { install -d -o s6log -g s6log /run/log/atftpd }
-s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /run/log/atftpd
--- a/atftp/atftpd-log/type
+++ b/atftp/atftpd-log/type
@@ -1 +0,0 @@
-longrun
--- a/atftp/atftpd-srv/producer-for
+++ b/atftp/atftpd-srv/producer-for
@@ -1 +0,0 @@
-atftpd-log
--- a/atftp/atftpd-srv/type
+++ b/atftp/atftpd-srv/type
@@ -1 +0,0 @@
-longrun
--- a/audit/audit.conf
+++ b/audit/audit.conf
@@ -1,12 +0,0 @@
-# This option is used to determine if rules & watches should be deleted on
-# shutdown by loading the audit-stop file. This is beneficial in most cases
-# so that a watch doesn't linger on a drive that is being unmounted. If
-# set to no, it will NOT be cleaned up.
-AUDITD_CLEAN_STOP=no
-
-# This option determines whether or not to call augenrules to compile the
-# audit rules from /etc/audit/rules.d. The default is "yes".
-USE_AUGENRULES=yes
-
-# This configures the directives used for s6-log in the log service.
-DIRECTIVES="n3 s2000000 T"
--- a/audit/auditctl/type
+++ b/audit/auditctl/type
@@ -1 +0,0 @@
-oneshot
--- a/audit/auditd-log/consumer-for
+++ b/audit/auditd-log/consumer-for
@@ -1 +0,0 @@
-auditd-srv
--- a/audit/auditd-log/pipeline-name
+++ b/audit/auditd-log/pipeline-name
@@ -1 +0,0 @@
-auditd
--- a/audit/auditd-log/run
+++ b/audit/auditd-log/run
@@ -1,9 +0,0 @@
-#!/bin/execlineb -P
-envfile /etc/s6/config/audit.conf
-importas -sCuD "n3 s2000000 T" DIRECTIVES DIRECTIVES
-ifelse { test -w /var/log } {
-	foreground { install -d -o s6log -g s6log /var/log/auditd }
-	s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /var/log/auditd
-}
-foreground { install -d -o s6log -g s6log /run/log/auditd }
-s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /run/log/auditd
--- a/audit/auditd-log/type
+++ b/audit/auditd-log/type
@@ -1 +0,0 @@
-longrun
--- a/audit/auditd-srv/producer-for
+++ b/audit/auditd-srv/producer-for
@@ -1 +0,0 @@
-auditd-log
--- a/audit/auditd-srv/type
+++ b/audit/auditd-srv/type
@@ -1 +0,0 @@
-longrun
--- a/autofs/autofs-log/consumer-for
+++ b/autofs/autofs-log/consumer-for
@@ -1 +0,0 @@
-autofs-srv
--- a/autofs/autofs-log/pipeline-name
+++ b/autofs/autofs-log/pipeline-name
@@ -1 +0,0 @@
-autofs
--- a/autofs/autofs-log/run
+++ b/autofs/autofs-log/run
@@ -1,9 +0,0 @@
-#!/bin/execlineb -P
-envfile /etc/s6/config/autofs.conf
-importas -sCuD "n3 s2000000 T" DIRECTIVES DIRECTIVES
-ifelse { test -w /var/log } {
-	foreground { install -d -o s6log -g s6log /var/log/autofs }
-	s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /var/log/autofs
-}
-foreground { install -d -o s6log -g s6log /run/log/autofs }
-s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /run/log/autofs
--- a/autofs/autofs-log/type
+++ b/autofs/autofs-log/type
@@ -1 +0,0 @@
-longrun
--- a/autofs/autofs-srv/producer-for
+++ b/autofs/autofs-srv/producer-for
@@ -1 +0,0 @@
-autofs-log
--- a/autofs/autofs-srv/type
+++ b/autofs/autofs-srv/type
@@ -1 +0,0 @@
-longrun
--- a/autofs/autofs.conf
+++ b/autofs/autofs.conf
@@ -1,2 +0,0 @@
-# This configures the directives used for s6-log in the log service.
-DIRECTIVES="n3 s2000000 T"
--- a/avahi/avahi-daemon-log/consumer-for
+++ b/avahi/avahi-daemon-log/consumer-for
@@ -1 +0,0 @@
-avahi-daemon-srv
--- a/avahi/avahi-daemon-log/pipeline-name
+++ b/avahi/avahi-daemon-log/pipeline-name
@@ -1 +0,0 @@
-avahi-daemon
--- a/avahi/avahi-daemon-log/run
+++ b/avahi/avahi-daemon-log/run
@@ -1,9 +0,0 @@
-#!/bin/execlineb -P
-envfile /etc/s6/config/avahi.conf
-importas -sCuD "n3 s2000000 T" DIRECTIVES DIRECTIVES
-ifelse { test -w /var/log } {
-	foreground { install -d -o s6log -g s6log /var/log/avahi-daemon }
-	s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /var/log/avahi-daemon
-}
-foreground { install -d -o s6log -g s6log /run/log/avahi-daemon }
-s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /run/log/avahi-daemon
--- a/avahi/avahi-daemon-log/type
+++ b/avahi/avahi-daemon-log/type
@@ -1 +0,0 @@
-longrun
--- a/avahi/avahi-daemon-srv/producer-for
+++ b/avahi/avahi-daemon-srv/producer-for
@@ -1 +0,0 @@
-avahi-daemon-log
--- a/avahi/avahi-daemon-srv/type
+++ b/avahi/avahi-daemon-srv/type
@@ -1 +0,0 @@
-longrun
--- a/avahi/avahi.conf
+++ b/avahi/avahi.conf
@@ -1,2 +0,0 @@
-# This configures the directives used for s6-log in the log service.
-DIRECTIVES="n3 s2000000 T"
--- a/backlight/backlight/type
+++ b/backlight/backlight/type
@@ -1 +0,0 @@
-oneshot
--- a/backuppc/backuppc/type
+++ b/backuppc/backuppc/type
@@ -1 +0,0 @@
-longrun
--- a/bftpd/bftpd/type
+++ b/bftpd/bftpd/type
@@ -1 +0,0 @@
-longrun
--- a/bind/named/type
+++ b/bind/named/type
@@ -1 +0,0 @@
-longrun
--- a/bitlbee/bitlbee-log/consumer-for
+++ b/bitlbee/bitlbee-log/consumer-for
@@ -1 +0,0 @@
-bitlbee-srv
--- a/bitlbee/bitlbee-log/pipeline-name
+++ b/bitlbee/bitlbee-log/pipeline-name
@@ -1 +0,0 @@
-bitlbee
--- a/bitlbee/bitlbee-log/run
+++ b/bitlbee/bitlbee-log/run
@@ -1,9 +0,0 @@
-#!/bin/execlineb -P
-envfile /etc/s6/config/bitlbee.conf
-importas -sCuD "n3 s2000000 T" DIRECTIVES DIRECTIVES
-ifelse { test -w /var/log } {
-	foreground { install -d -o s6log -g s6log /var/log/bitlbee }
-	s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /var/log/bitlbee
-}
-foreground { install -d -o s6log -g s6log /run/log/bitlbee }
-s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /run/log/bitlbee
--- a/bitlbee/bitlbee-log/type
+++ b/bitlbee/bitlbee-log/type
@@ -1 +0,0 @@
-longrun
--- a/bitlbee/bitlbee-srv/producer-for
+++ b/bitlbee/bitlbee-srv/producer-for
@@ -1 +0,0 @@
-bitlbee-log
--- a/bitlbee/bitlbee-srv/type
+++ b/bitlbee/bitlbee-srv/type
@@ -1 +0,0 @@
-longrun
--- a/bitlbee/bitlbee.conf
+++ b/bitlbee/bitlbee.conf
@@ -1,2 +0,0 @@
-# This configures the directives used for s6-log in the log service.
-DIRECTIVES="n3 s2000000 T"
--- a/bluez/bluetoothd-log/consumer-for
+++ b/bluez/bluetoothd-log/consumer-for
@@ -1 +0,0 @@
-bluetoothd-srv
--- a/bluez/bluetoothd-log/pipeline-name
+++ b/bluez/bluetoothd-log/pipeline-name
@@ -1 +0,0 @@
-bluetoothd
--- a/bluez/bluetoothd-log/run
+++ b/bluez/bluetoothd-log/run
@@ -1,9 +0,0 @@
-#!/bin/execlineb -P
-envfile /etc/s6/config/bluez.conf
-importas -sCuD "n3 s2000000 T" DIRECTIVES DIRECTIVES
-ifelse { test -w /var/log } {
-	foreground { install -d -o s6log -g s6log /var/log/bluetoothd }
-	s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /var/log/bluetoothd
-}
-foreground { install -d -o s6log -g s6log /run/log/bluetoothd }
-s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /run/log/bluetoothd
--- a/bluez/bluetoothd-log/type
+++ b/bluez/bluetoothd-log/type
@@ -1 +0,0 @@
-longrun
--- a/bluez/bluetoothd-srv/producer-for
+++ b/bluez/bluetoothd-srv/producer-for
@@ -1 +0,0 @@
-bluetoothd-log
--- a/bluez/bluetoothd-srv/type
+++ b/bluez/bluetoothd-srv/type
@@ -1 +0,0 @@
-longrun
--- a/bluez/bluez.conf
+++ b/bluez/bluez.conf
@@ -1,2 +0,0 @@
-# This configures the directives used for s6-log in the log service.
-DIRECTIVES="n3 s2000000 T"
--- a/boinc/boinc-log/consumer-for
+++ b/boinc/boinc-log/consumer-for
@@ -1 +0,0 @@
-boinc-srv
--- a/boinc/boinc-log/pipeline-name
+++ b/boinc/boinc-log/pipeline-name
@@ -1 +0,0 @@
-boinc
--- a/boinc/boinc-log/run
+++ b/boinc/boinc-log/run
@@ -1,9 +0,0 @@
-#!/bin/execlineb -P
-envfile /etc/s6/config/boinc.conf
-importas -sCuD "n3 s2000000 T" DIRECTIVES DIRECTIVES
-ifelse { test -w /var/log } {
-	foreground { install -d -o s6log -g s6log /var/log/boinc }
-	s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /var/log/boinc
-}
-foreground { install -d -o s6log -g s6log /run/log/boinc }
-s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /run/log/boinc
--- a/boinc/boinc-log/type
+++ b/boinc/boinc-log/type
@@ -1 +0,0 @@
-longrun
--- a/boinc/boinc-srv/producer-for
+++ b/boinc/boinc-srv/producer-for
@@ -1 +0,0 @@
-boinc-log
--- a/boinc/boinc-srv/type
+++ b/boinc/boinc-srv/type
@@ -1 +0,0 @@
-longrun
--- a/boinc/boinc.conf
+++ b/boinc/boinc.conf
@@ -1,2 +0,0 @@
-# This configures the directives used for s6-log in the log service.
-DIRECTIVES="n3 s2000000 T"
--- a/bolt/bolt.conf
+++ b/bolt/bolt.conf
@@ -1,2 +0,0 @@
-# This configures the directives used for s6-log in the log service.
-DIRECTIVES="n3 s2000000 T"
--- a/bolt/boltd-log/consumer-for
+++ b/bolt/boltd-log/consumer-for
@@ -1 +0,0 @@
-boltd-srv
--- a/bolt/boltd-log/pipeline-name
+++ b/bolt/boltd-log/pipeline-name
@@ -1 +0,0 @@
-boltd
--- a/bolt/boltd-log/run
+++ b/bolt/boltd-log/run
@@ -1,9 +0,0 @@
-#!/bin/execlineb -P
-envfile /etc/s6/config/bolt.conf
-importas -sCuD "n3 s2000000 T" DIRECTIVES DIRECTIVES
-ifelse { test -w /var/log } {
-	foreground { install -d -o s6log -g s6log /var/log/boltd }
-	s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /var/log/boltd
-}
-foreground { install -d -o s6log -g s6log /run/log/boltd }
-s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /run/log/boltd
--- a/bolt/boltd-log/type
+++ b/bolt/boltd-log/type
@@ -1 +0,0 @@
-longrun
--- a/bolt/boltd-srv/producer-for
+++ b/bolt/boltd-srv/producer-for
@@ -1 +0,0 @@
-boltd-log
--- a/bolt/boltd-srv/type
+++ b/bolt/boltd-srv/type
@@ -1 +0,0 @@
-longrun
--- a/brltty/brltty-log/consumer-for
+++ b/brltty/brltty-log/consumer-for
@@ -1 +0,0 @@
-brltty-srv
--- a/brltty/brltty-log/pipeline-name
+++ b/brltty/brltty-log/pipeline-name
@@ -1 +0,0 @@
-brltty
--- a/brltty/brltty-log/run
+++ b/brltty/brltty-log/run
@@ -1,9 +0,0 @@
-#!/bin/execlineb -P
-envfile /etc/s6/config/brltty.conf
-importas -sCuD "n3 s2000000 T" DIRECTIVES DIRECTIVES
-ifelse { test -w /var/log } {
-	foreground { install -d -o s6log -g s6log /var/log/brltty }
-	s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /var/log/brltty
-}
-foreground { install -d -o s6log -g s6log /run/log/brltty }
-s6-setuidgid s6log exec -c s6-log -d3 -b -- ${DIRECTIVES} /run/log/brltty
--- a/brltty/brltty-log/type
+++ b/brltty/brltty-log/type
@@ -1 +0,0 @@
-longrun
--- a/brltty/brltty-srv/producer-for
+++ b/brltty/brltty-srv/producer-for
@@ -1 +0,0 @@
-brltty-log
--- a/brltty/brltty-srv/type
+++ b/brltty/brltty-srv/type
@@ -1 +0,0 @@
-longrun
--- a/brltty/brltty.conf
+++ b/brltty/brltty.conf
@@ -1,2 +0,0 @@
-# This configures the directives used for s6-log in the log service.
-DIRECTIVES="n3 s2000000 T"
--- a/bumblebee/bumblebee.conf
+++ b/bumblebee/bumblebee.conf
@@ -1,2 +0,0 @@
-# This configures the directives used for s6-log in the log service.
-DIRECTIVES="n3 s2000000 T"
--- a/bumblebee/bumblebeed-log/consumer-for
+++ b/bumblebee/bumblebeed-log/consumer-for
@@ -1 +0,0 @@
-bumblebeed-srv
--- a/bumblebee/bumblebeed-log/pipeline-name
+++ b/bumblebee/bumblebeed-log/pipeline-name
@@ -1 +0,0 @@
-bumblebeed
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Dudemanguy	13c0fc85d9	completely refactor service generation Far too many changes to list, but having a ton of redundant files like "type" were removed since they can be generated in the install script instead. cg support is also added to every longrun.	2024-04-26 12:30:33 -05:00
Dudemanguy	131347b788	install.sh: use sed instead of cut Better fix for the avahi-daemon edge case than as opposed to forcing an extra log directory. -srv should only ever be at the end.	2024-03-14 19:56:04 -05:00
Dudemanguy	bdc85eb6ac	install.sh: also check log directory count	2024-03-14 19:37:31 -05:00
Dudemanguy	441ce81954	avahi: add custom logging service Missed in the -log refactor	2024-03-14 19:24:57 -05:00
Dudemanguy	e43dbfc803	avahi-daemon-srv: add hostname dependency Fixes a race condition reported on the forum.	2024-03-14 14:57:02 -05:00
Alexander	09a504e555	cpupower/up: fix up script Several command line switches were missing and the if blocks need to be wrapped by foreground calls.	2023-12-31 17:50:36 -06:00
Dudemanguy	8f5148af0d	mailman-srv: sort of fix Well it was definitely broken before at least.	2023-08-29 20:57:25 -05:00
Edmund Noble	ef91b7b77c	containerd-srv: set ulimit like in docker-srv Patch from IRC.	2023-08-28 16:19:48 -05:00
Dudemanguy	8cb0a36d34	lxdm: add dependencies on tmpfiles Reported in IRC.	2023-08-04 10:05:41 -05:00
Dudemanguy	653ff33a52	install.sh: install the conf even if there is no log It's possible for a service to not have a log service but still need a conf file (wireguard). Be sure to install the file in this case.	2023-08-04 10:02:16 -05:00
Dudemanguy	32c68f886d	install.sh: allow custom log directories For those few services that deviate from the template.	2023-08-03 22:25:25 -05:00
Dudemanguy	333c555768	install.sh: allow custom .conf files If found, the template one won't be installed.	2023-08-03 22:25:25 -05:00
Dudemanguy	596d587c13	refactor log and conf installation from template Since most of the log services and conf files are exactly the same, use a template instead with the install script to ease handling instead of copy and pasting. The special cases will need individual handling.	2023-08-03 21:50:43 -05:00