Bump pacman versions

Signed-off-by: Dan McGee <dan@archlinux.org>

.gitignore

@@ -1,30 +1,21 @@
-Makefile
-Makefile.in
-mkinstalldirs
+*~
+*.o
 aclocal.m4
 autom4te.cache
-config.guess
 config.h
 config.h.in
 config.log
 config.status
 config.status.lineno
-config.rpath
-config.sub
 configure
 configure.lineno
-depcomp
-install-sh
-libtool
-ltmain.sh
-missing
-stamp-h1
-
-*.o
-*~
-root
-tags
-cscope.out
 cscope.in.out
+cscope.out
 cscope.po.out
+libtool
+Makefile
+Makefile.in
 pacman-*.tar.gz
+root
+stamp-h1
+tags

.mailmap

@@ -0,0 +1,28 @@
+Aaron Griffin <aaron@archlinux.org> <aaronmgriffin@gmail.com>
+Allan McRae <allan@archlinux.org> <mcrae_allan@hotmail.com>
+Allan McRae <allan@archlinux.org> <mcrae_allan at hotmail.com>
+Allan McRae <allan@archlinux.org> <allan.mcrae@qimr.edu.au>
+Andres P <aepd87@gmail.com> <stderr@mail.com>
+Bryan Ischo <bryan@ischo.com> <bji-keyword-pacman.3644cb@www.ischo.com>
+Christos Nouskas <nous@archlinux.us> <nouskas@gmail.com>
+Daenyth Blank <daenyth+arch@gmail.com> <Daenyth+Arch@gmail.com>
+Daenyth Blank <Daenyth+Arch@gmail.com> <Daenyth+git@gmail.com>
+甘露(Gan Lu) <rhythm.gan@gmail.com>
+Giovanni Scafora <giovanni@archlinux.org> <linuxmania@gmail.com>
+Jaroslaw Swierczynski <swiergot@gmail.com> <swiergot@juvepoland.com>
+Juan Pablo González Tognarelli <lord_jotape@yahoo.com.ar>
+Juan Pablo González Tognarelli <lord_jotape@yahoo.com.ar> <jotapesan@gmail.com>
+Manuel Tortosa <manutortosa@chakra-project.org> <manutortosa@gmail.com>
+Marc - A. Dahlhaus <mad@wol.de>
+Matthias Gorissen <matthias@archlinux.de> <siquame@web.de>
+Laszlo Papp <djszapi@archlinux.us> <djszapi2@gmail.com>
+Nagy Gabor <ngaba@bibl.u-szeged.hu> <ngaba@petra.hos.u-szeged.hu>
+Nagy Gabor <ngaba@bibl.u-szeged.hu> <ngaba at bibl.u-szeged.hu>
+Nezmer <git@nezmer.info> <Nezmer@allurelinux.org>
+Roman Kyrylych <roman@archlinux.org> <roman.kyrylych@gmail.com>
+Sebastian Nowicki <sebnow@gmail.com> <xilonmu@gmail.com>
+Vojtěch Gondžala <vojtech.gondzala@gmail.com> <vogo@seznam.cz>
+Vojtěch Gondžala <vojtech.gondzala@gmail.com> Vojtech Gondzala <vojtech.gondzala@gmail.com>
+Xavier Chantry <shiningxc@gmail.com>
+Xavier Chantry <shiningxc@gmail.com> <chantry.xavier@gmail.com>
+Xavier Chantry <shiningxc@gmail.com> <xav@chantry.homelinux.org>

.tx/config

@@ -0,0 +1,13 @@
+[main]
+host = https://www.transifex.net
+
+[archlinux-pacman.libalpm-pot]
+file_filter = lib/libalpm/po/<lang>.po
+source_file = lib/libalpm/po/libalpm.pot
+source_lang = en
+
+[archlinux-pacman.pacman-pot]
+file_filter = po/<lang>.po
+source_file = po/pacman.pot
+source_lang = en
+

HACKING

@@ -12,10 +12,10 @@ Coding style
 1.  All code should be indented with tabs. (Ignore the use of only spaces in
     this file) By default, source files contain the following VIM modeline:
 +
-[code,C]
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+[source,C]
+-------------------------------------------
 /* vim: set ts=2 sw=2 noet: */
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-------------------------------------------
 
 2.  When opening new blocks such as 'while', 'if', or 'for', leave the opening
     brace on the same line as the beginning of the codeblock. The closing brace
@@ -24,8 +24,8 @@ Coding style
     braces, even if it's just a one-line block. This reduces future error when
     blocks are expanded beyond one line.
 +
-[code,C]
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+[source,C]
+-------------------------------------------
 for(lp = list; lp; lp = lp->next) {
   newlist = _alpm_list_add(newlist, strdup(lp->data));
 }
@@ -40,14 +40,14 @@ while(it) {
   free(it);
   it = ptr;
 }
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-------------------------------------------
 
 3.  When declaring a new function, put the opening and closing braces on their
     own line. Also, when declaring a pointer, do not put a space between the
     asterisk and the variable name.
 +
-[code,C]
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+[source,C]
+-------------------------------------------
 alpm_list_t *alpm_list_add(alpm_list_t *list, void *data)
 {
   alpm_list_t *ptr, *lp;
@@ -58,7 +58,7 @@ alpm_list_t *alpm_list_add(alpm_list_t *list, void *data)
   }
   ...
 }
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-------------------------------------------
 
 4.  Comments should be ANSI-C89 compliant. That means no `// Comment` style;
     use only `/* Comment */` style.
@@ -101,37 +101,50 @@ Currently our #include usage is in messy shape, but this is no reason to
 continue down this messy path. When adding an include to a file, follow this
 general pattern, including blank lines:
 
-[code,C]
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+[source,C]
+-------------------------------------------
 #include "config.h"
 
 #include <standardheader.h>
 #include <another.h>
 #include <...>
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-------------------------------------------
 
 Follow this with some more headers, depending on whether the file is in libalpm
 or pacman proper. For libalpm:
 
-[code,C]
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+[source,C]
+-------------------------------------------
 /* libalpm */
 #include "yourfile.h"
 #include "alpm_list.h"
 #include "anythingelse.h"
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-------------------------------------------
 
 For pacman:
 
-[code,C]
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+[source,C]
+-------------------------------------------
 #include <alpm.h>
 #include <alpm_list.h>
 
 /* pacman */
 #include "yourfile.h"
 #include "anythingelse.h"
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+-------------------------------------------
+
+GDB and Valgrind Usage
+~~~~~~~~~~~~~~~~~~~~~~
+
+When using GDB or valgrind on pacman, you will want to run it on the actual
+binary rather than the shell script wrapper produced by libtool. The actual
+binary lives at `src/pacman/.libs/lt-pacman`, and will exist after running
+`./src/pacman/pacman` at least once.
+
+For example, to run valgrind:
+
+    ./src/pacman/pacman
+    valgrind --leak-check=full -- src/pacman/.libs/lt-pacman -Syu
 
 /////
 vim: set ts=2 sw=2 syntax=asciidoc et:

Makefile.am

@@ -1,8 +1,10 @@
-SUBDIRS = lib/libalpm src/util src/pacman scripts etc po pactest contrib
+SUBDIRS = lib/libalpm src/util src/pacman scripts etc po test/pacman test/util contrib
 if WANT_DOC
 SUBDIRS += doc
 endif
 
+ACLOCAL_AMFLAGS = -I m4 --install
+
 # Make sure we test and build manpages when doing distcheck
 DISTCHECK_CONFIGURE_FLAGS = --enable-doc --disable-git-version
 
@@ -15,12 +17,12 @@ pkgdatadir = ${datadir}/${PACKAGE}
 dist_pkgdata_DATA = PKGBUILD.proto PKGBUILD-split.proto proto.install ChangeLog.proto
 
 # run the pactest test suite and vercmp tests
-check-local: pactest src/pacman src/util
-	$(PYTHON) $(top_srcdir)/pactest/pactest.py --debug=1 \
-		--test $(top_srcdir)/pactest/tests/*.py \
+check-local: test/pacman test/util src/pacman src/util
+	$(PYTHON) $(top_srcdir)/test/pacman/pactest.py --debug=1 \
+		--test $(top_srcdir)/test/pacman/tests/*.py \
 		-p $(top_builddir)/src/pacman/pacman
 	rm -rf $(top_builddir)/root
-	$(SH) $(top_srcdir)/pactest/vercmptest.sh \
+	$(SH) $(top_srcdir)/test/util/vercmptest.sh \
 		$(top_builddir)/src/util/vercmp
 
 # create the pacman DB and cache directories upon install

NEWS

@@ -1,5 +1,141 @@
 VERSION         DESCRIPTION
 -----------------------------------------------------------------------------
+3.5.0         - sync DBs read directly from the database tarball
+                (FS#8586, FS#20233)
+              - local DB "depends" file has been merged into the "desc" file
+                - pacman-db-upgrade script provided to update the local
+                  database format
+              - sync database extension is .db (without compression suffix)
+                - requires repo-add from pacman-3.4+
+              - package versions can have an 'epoch' value defined that will
+                overrule any version comparison
+                - this replaces the use of the "force" option in allowing for
+                  package updates with versions that do not conform to the
+                  default version comparison operations
+                - package versions have the format [epoch:]pkgver-pkgrel
+              - check available disk space before installing packages (FS#11639)
+                - enabled by the "CheckSpace" option in pacman.conf
+                - attempt to stop install if we hit an extraction issue
+                  (FS#7692, FS#22034)
+              - improved interactive selection for groups/provides
+                (FS#19704, FS#19853)
+              - finer grained control of ignoring dependency resolution
+                - -Sd to ignore dependency versions only
+                - -Sdd to ignore all dependency information
+              - clean-up of --help output (FS#19526)
+              - CleanMethod for package cache cleaning can use both
+                KeepInstalled and KeepCurrent simultaneously
+              - various speed-ups:
+                - improved internal storage of the package cache
+                - faster pkgname/depends searches
+              - use OpenSSL crypto functions if available
+              - makepkg:
+                - add support for running testsuites in a check() function
+                  (FS#15145)
+                  - controlled by BUILDENV option 'check' in makepkg.conf
+                    which may be overridden by --check/--nocheck on the
+                    command-line
+                - extract any file bsdtar recognizes
+                - STRIP_DIRS has been removed in favor of stripping all
+                  recognized files
+                - improve $srcdir/$pkgdir check to reduce false positives
+                - $pkgname can be used in split package() functions (FS#22174)
+                - added '!buildflags' option to allow unsetting of CFLAGS,
+                  CXXFLAGS and LDFLAGS
+              - repo-add: added -f/--files to create files database (FS#11302)
+              - pactree: rewritten in C using libalpm
+3.4.3         - fix attempted double remove of all files issue during upgrades
+              - respect IgnorePkg/IgnoreGroup for group members (FS#19854)
+              - back out epoch changes; 3.5.X will handle them differently
+3.4.2         - fix progress bar display with empty packages
+              - make pactest testsuite Python 2.7 compatible
+              - write epoch values in preparation for 3.5.X releases
+              - fix null pointer dereference in architecture check (FS#21668)
+              - documentation: remove unnecessary "|| return 1"
+              - contrib/bacman: update package compression selection
+              - contrib/PKGBUILD.vim: add a few more license options
+              - translations: es, kk, sv, pt, ru updated
+3.4.1         - fix interaction of --needed and multiple repo groups (FS#20221)
+              - bash completion: small fixes to prevent alias problems
+              - rankmirrors: fix bogus/empty variable assignment (FS#19911)
+              - repo-add: ensure bare DB symlinks are relative (FS#20498)
+              - repo-add: fallback to copy if symlink not permitted (FS#19907)
+              - makepkg:
+                - use absolute path to 'du' to exclude wrapper progs (FS#19932)
+                - ensure $startdir check doesn't stall indefinitely (FS#19975)
+                - fix repackaging with multiple passed packages (FS#20272)
+              - translations:
+                - zh_CN: fix crash when using during install (FS#20188)
+                - sk: new Slovak translation
+                - pt: new European Portuguese translation
+                - other small updates to various translations
+3.4.0         - new "Architecture" option that will restrict pacman to
+                installing only packages from the given architecture. Can be
+                set to "auto" in which case the output of "uname -m" is used
+              - use "$arch" when specifying a mirror url to automatically
+                select the correct architecture
+              - Installing packages with -U can handle installing
+                dependencies, conflict resolution and replacing packages
+                (FS#3492, FS#5798)
+              - can upgrade the system and install a new package using 
+                "pacman -Syu <pkg>" (FS#15581)
+              - new -D/--database operation for modifying package install
+                reasons (FS#12950)
+              - new --print and --print-format options to output information
+                in suitable format for wrapper scripts (FS#14208)
+              - only extract new entries when updating a repo database
+              - show "Required by" in -Sii output (FS#16244)
+              - -U and -R options always ask for confirmation
+              - allow -Qo to perform a functional 'which' (FS#8798)
+              - cache cleaning cleans all directories, not just first
+              - cleanupdelta: new utility to help remove unused deltas from
+                a repo database 
+              - bash completion: rewrite for size and performance (FS#16630)
+              - repo-add: handle removing the final package from a repo
+              - rankmirrors: rewrite using bash
+              - vercmp: does not link to libalpm to prevent upgrade issues
+              - makepkg:
+                - automatically aborts on any errors during packaging
+                - changelogs are now included via the "changelog" variable
+                - override pkgver, pkgrel and arch in split packages (FS#15955)
+                - repackaging without a package() function is deprecated
+                - stricter syntax checking for backup and optdepends entries
+                - file stripping options are configurable
+                - New --pkg flag to allow building specific package(s) from
+                  split PKGBUILDs (FS#15956)
+                - build() function is now optional (FS#15147)
+                - warn about reference to build root in a package (FS#14751)
+                - configure source package destination with SRCPKGDEST
+                - major internal refactoring of handling tests ("[" to "[[")
+              - contrib/pactree: print reverse dependency tree
+3.3.3         - correctly check the return code from opendir()
+              - fix possible infinite loop in alpm_list_remove()
+              - makepkg:
+                - quote arrays to preserve spaces in arrays (FS#16871)
+                - allow passing arguments with spaces
+                - adjust preselected option for clearing cache
+              - translations:
+                - zh_CN: fix positional parameter usage in makepkg (FS#16983)
+                - el: fix Y/N response translation (FS#16568)
+3.3.2         - fix infinite filesize download issue (FS#16359)
+              - fix bogus download size on TotalDownload
+              - documentation updates
+              - small translation updates
+              - repo-add: use size of target files and not symlinks
+              - repo-remove: create empty DB when all packages are removed
+3.3.1         - use full path to ldconfig when calling in chroot
+              - optimize the check for modified databases during sync
+              - ensure installed libfetch is new enough
+              - have -Q ops return 1 when no package matches (FS#15938)
+              - skip SyncFirst dialog if unnecessary (FS#15810)
+              - misc documentation updates (FS#15870, FS#15984)
+              - testdb: be less verbose during checks
+              - existing translation updates
+              - two new translations: Norwegian, Swedish
+              - makepkg:
+                - add --skipinteg option (FS#15830)
+                - fix .PKGINFO creation with -R option (FS#15851)
+                - always keep symlinks to sources when unpacking
 3.3.0         - xdelta: many fixes and improvements
                 - new pkgdelta script to create deltas
                 - repo-add can add both deltas and packages to a database

PKGBUILD-split.proto

@@ -3,11 +3,12 @@
 # see 'man PKGBUILD'. NOTE: Please fill out the license field for your package!
 # If it is unknown, then please put 'unknown'.
 
-# Contributor: Your Name <youremail@domain.com>
+# Maintainer: Your Name <youremail@domain.com>
 pkgname=('pkg1' 'pkg2')
-pkgbase=""
+pkgbase=BASE
 pkgver=VERSION
 pkgrel=1
+epoch=
 pkgdesc=""
 arch=()
 url=""
@@ -15,12 +16,14 @@ license=('GPL')
 groups=()
 depends=()
 makedepends=()
+checkdepends=()
 provides=()
 conflicts=()
 replaces=()
 backup=()
 options=()
 install=
+changelog=
 source=($pkgbase-$pkgver.tar.gz)
 noextract=()
 md5sums=() #generate with 'makepkg -g'
@@ -28,12 +31,20 @@ md5sums=() #generate with 'makepkg -g'
 build() {
   cd "$srcdir/$pkgbase-$pkgver"
   ./configure --prefix=/usr
-  make || return 1
+  make
+}
+
+check() {
+  cd "$srcdir/$pkgname-$pkgver"
+  make -k check
 }
 
 package_pkg1() {
   # options and directives that can be overridden
+  pkgver=
+  pkgrel=
   pkgdesc=""
+  arch=()
   license=()
   groups=()
   depends=()
@@ -44,6 +55,7 @@ package_pkg1() {
   backup=()
   options=()
   install=
+  changelog=
 
   cd "$srcdir/$pkgbase-$pkgver"
   make DESTDIR="$pkgdir/" install-pkg1

PKGBUILD.proto

@@ -3,10 +3,11 @@
 # NOTE: Please fill out the license field for your package! If it is unknown,
 # then please put 'unknown'.
 
-# Contributor: Your Name <youremail@domain.com>
+# Maintainer: Your Name <youremail@domain.com>
 pkgname=NAME
 pkgver=VERSION
 pkgrel=1
+epoch=
 pkgdesc=""
 arch=()
 url=""
@@ -14,6 +15,7 @@ license=('GPL')
 groups=()
 depends=()
 makedepends=()
+checkdepends=()
 optdepends=()
 provides=()
 conflicts=()
@@ -21,15 +23,24 @@ replaces=()
 backup=()
 options=()
 install=
+changelog=
 source=($pkgname-$pkgver.tar.gz)
 noextract=()
 md5sums=() #generate with 'makepkg -g'
 
 build() {
   cd "$srcdir/$pkgname-$pkgver"
-
   ./configure --prefix=/usr
-  make || return 1
+  make
+}
+
+check() {
+  cd "$srcdir/$pkgname-$pkgver"
+  make -k check
+}
+
+package() {
+  cd "$srcdir/$pkgname-$pkgver"
   make DESTDIR="$pkgdir/" install
 }
 

README

@@ -57,7 +57,6 @@ library is initialized.
 * dbpath: The toplevel database directory (Default: /var/lib/pacman)
 * logfile: The base path to pacman's log file (Default: /var/log/pacman.log)
 * usesyslog: Log to syslog instead of `logfile` for file-base logging.
-* nopassiveftp: Do not use passive FTP commands for ftp connections.
 
 The following options also have `alpm_option_{add,remove}_*` functions, as the
 values are list structures.
@@ -296,3 +295,73 @@ API CHANGES BETWEEN 3.2 AND 3.3
 - error codes:
     PM_ERR_SERVER_NONE, PM_ERR_TRANS_NOT_LOCKED, PM_ERR_PKG_IGNORED and
     PM_ERR_LIBFETCH
+
+
+API CHANGES BETWEEN 3.3 AND 3.4
+===============================
+
+[REMOVED]
+- pmtranstype_t struct (transaction type), alpm_trans_get_type()
+- alpm_option_get_nopassiveftp(), alpm_option_set_nopassiveftp()
+
+[CHANGED]
+- interface for target loading:
+  - alpm_trans_addtarget() and alpm_trans_sysupgrade() were removed
+  - alpm_sync_target() and alpm_sync_dbtarget() can be used to add a sync target
+  - alpm_sync_sysupgrade() can be used to add outdated packages (for sysupgrade)
+  - alpm_add_target() can be used to add an add/upgrade target
+  - alpm_remove_target() can be used to add a remove target
+- interface for target listing:
+  - alpm_trans_get_pkgs() was removed
+  - alpm_pkg_get_removes() was removed
+  - alpm_trans_get_add() can be used to list add/upgrade/sync targets
+  - alpm_trans_get_remove() can be used to list to-be-removed packages
+- the type parameter of alpm_trans_init() was removed
+- the type of alpm_db_fetch callback function: mtimeold and mtimenew parameters
+  were replaced by force parameter
+- unsigned short -> int changes for Boolean variables
+
+[ADDED]
+- alpm_db_set_pkgreason()
+- alpm_option_get_arch(), alpm_option_set_arch()
+- alpm_option_get_usedelta()
+- alpm_pkg_unused_deltas()
+- alpm_conflict_get_reason()
+- error code: PM_ERR_PKG_INVALID_ARCH
+
+
+API CHANGES BETWEEN 3.4 AND 3.5
+===============================
+
+[REMOVED]
+- alpm_db_register_local()
+- alpm_pkg_has_force()
+- alpm_depcmp()
+
+[CHANGED]
+- alpm_trans_cb_progress type had some types changed from int to size_t
+- alpm_cb_log format string is now const char *
+- the interface to add/remove targets:
+  - functions take pmpkg_t * rather than char *.
+  - alpm_sync_target() and alpm_sync_dbtarget() are replaced by alpm_add_pkg()
+  - alpm_add_target() is replaced by alpm_add_pkg()
+  - alpm_remove_target() is replaced by alpm_remove_pkg()
+  - packages can come from:
+     - alpm_db_get_pkg() for normal targets
+     - alpm_find_dbs_satisfier() for versioned provisions
+     - alpm_find_grp_pkgs() for groups
+- alpm_deptest() is replaced by the more flexibile alpm_find_satisfier()
+- size_t used for alpm_list_t sizes
+  - return type for alpm_list_count()
+  - parameter type in alpm_list_msort() and alpm_list_nth()
+
+[ADDED]
+- alpm_option_get_checkspace(), alpm_option_set_checkspace()
+- alpm_find_grp_pkgs()
+- alpm_trans_get_flags()
+- error codes:
+   PM_ERR_DISK_SPACE, PM_ERR_WRITE
+- flags
+   PM_TRANS_FLAG_NODEPVERSION, PM_TRANS_EVT_DISKSPACE_START,
+   PM_TRANS_EVT_DISKSPACE_DONE, PM_TRANS_CONV_SELECT_PROVIDER,
+   PM_TRANS_PROGRESS_DISKSPACE_START, PM_TRANS_PROGRESS_INTEGRITY_START

TRANSLATORS

@@ -10,10 +10,14 @@ If your language is not listed here and you wish it was, let the pacman mailing
 list know you are interested in making a translation. We will be happy to add
 your language to the mix.
 
+Catalan (ca):
+	Manuel Tortosa <manutortosa@chakra-project.org>
 Czech (cs):
 	Vojtěch Gondžala <vojtech.gondzala@gmail.com>
 German (de):
 	Matthias Gorissen <matthias@archlinux.de>
+Greek (el):
+	Christos Nouskas <nouskas@gmail.com>
 British English (en_GB):
 	Jeff Bailes <thepizzaking@gmail.com>
 Spanish (es):
@@ -28,6 +32,8 @@ Italian (it):
 	Giovanni Scafora <giovanni@archlinux.org>
 Kazakh (kk):
 	Baurzhan Muftakhidinov <baurthefirst@gmail.com>
+Norwegian (nb):
+	Hans-Kristian Arntzen <maister@archlinux.us>
 Polish (pl):
 	Mateusz Herych <heniekk@gmail.com>
 	Jaroslaw Swierczynski <swiergot@gmail.com>
@@ -43,6 +49,8 @@ Russian (ru):
 	Vitaly Dolgov <ferhiord@gmail.com>
 	Oleg Finkelshteyn <olegfink@gmail.com>
 	Vladimir Bayrakovskiy <4rayven@gmail.com>
+Swedish (sv):
+	Christian Larsson <congacx@gmail.com>
 Turkish (tr):
 	Samed Beyribey <ras0ir@eventualis.org>
 	Alper KANAT <alperkanat@gmail.com>

autoclean.sh

@@ -18,11 +18,11 @@ rm -f scripts/{Makefile.in,Makefile}
 rm -f etc/{Makefile.in,Makefile}
 rm -f etc/pacman.d/{Makefile.in,Makefile}
 rm -f etc/abs/{Makefile.in,Makefile}
-rm -f pactest{,/tests}/{Makefile.in,Makefile}
+rm -f test/{pacman,util}{,/tests}/{Makefile.in,Makefile}
 rm -f contrib/{Makefile.in,Makefile}
 rm -f doc/{Makefile.in,Makefile}
 
-rm -f pactest/*.pyc
+rm -f test/pacman/*.pyc
 rm -f doc/html/*.html
 rm -f doc/man3/*.3
 

autogen.sh

@@ -1,6 +1,6 @@
 #!/bin/sh -xu
 
-aclocal
+aclocal -I m4 --install
 autoheader
 automake --foreign
 autoconf

config.guess

@@ -1,10 +1,10 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
 #   Free Software Foundation, Inc.
 
-timestamp='2008-01-23'
+timestamp='2010-08-21'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -27,16 +27,16 @@ timestamp='2008-01-23'
 # the same distribution terms that you use for the rest of that program.
 
 
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
+# Originally written by Per Bothner.  Please send patches (context
+# diff format) to <config-patches@gnu.org> and include a ChangeLog
+# entry.
 #
 # This script attempts to guess a canonical system name similar to
 # config.sub.  If it succeeds, it prints the system name on stdout, and
 # exits with 0.  Otherwise, it exits with 1.
 #
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
 
 me=`echo "$0" | sed -e 's,.*/,,'`
 
@@ -56,8 +56,9 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
+Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -91,7 +92,7 @@ if test $# != 0; then
   exit 1
 fi
 
-trap 'exit 1' 1 2 15
+trap 'exit 1' HUP INT TERM
 
 # CC_FOR_BUILD -- compiler used by this script. Note that the use of a
 # compiler to aid in system detection is discouraged as it requires
@@ -105,7 +106,7 @@ trap 'exit 1' 1 2 15
 
 set_cc_for_build='
 trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" HUP INT PIPE TERM ;
 : ${TMPDIR=/tmp} ;
  { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
  { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
@@ -170,7 +171,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
 		eval $set_cc_for_build
 		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-			| grep __ELF__ >/dev/null
+			| grep -q __ELF__
 		then
 		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
 		    # Return netbsd for either.  FIX?
@@ -324,14 +325,33 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	case `/usr/bin/uname -p` in
 	    sparc) echo sparc-icl-nx7; exit ;;
 	esac ;;
+    s390x:SunOS:*:*)
+	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
     sun4H:SunOS:5.*:*)
 	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+	echo i386-pc-auroraux${UNAME_RELEASE}
+	exit ;;
     i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
-	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	eval $set_cc_for_build
+	SUN_ARCH="i386"
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH="x86_64"
+	    fi
+	fi
+	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     sun4*:SunOS:6*:*)
 	# According to config.sub, this is the proper way to canonicalize
@@ -532,7 +552,7 @@ EOF
 		echo rs6000-ibm-aix3.2
 	fi
 	exit ;;
-    *:AIX:*:[456])
+    *:AIX:*:[4567])
 	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
 	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
 		IBM_ARCH=rs6000
@@ -640,7 +660,7 @@ EOF
 	    # => hppa64-hp-hpux11.23
 
 	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
-		grep __LP64__ >/dev/null
+		grep -q __LP64__
 	    then
 		HP_ARCH="hppa2.0w"
 	    else
@@ -791,12 +811,12 @@ EOF
     i*:PW*:*)
 	echo ${UNAME_MACHINE}-pc-pw32
 	exit ;;
-    *:Interix*:[3456]*)
+    *:Interix*:*)
     	case ${UNAME_MACHINE} in
 	    x86)
 		echo i586-pc-interix${UNAME_RELEASE}
 		exit ;;
-	    EM64T | authenticamd)
+	    authenticamd | genuineintel | EM64T)
 		echo x86_64-unknown-interix${UNAME_RELEASE}
 		exit ;;
 	    IA64)
@@ -806,6 +826,9 @@ EOF
     [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
 	echo i${UNAME_MACHINE}-pc-mks
 	exit ;;
+    8664:Windows_NT:*)
+	echo x86_64-pc-mks
+	exit ;;
     i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
 	# How do we know it's Interix rather than the generic POSIX subsystem?
 	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
@@ -835,6 +858,20 @@ EOF
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+        esac
+	objdump --private-headers /bin/sh | grep -q ld.so.1
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	exit ;;
     arm*:Linux:*:*)
 	eval $set_cc_for_build
 	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
@@ -857,6 +894,17 @@ EOF
     frv:Linux:*:*)
     	echo frv-unknown-linux-gnu
 	exit ;;
+    i*86:Linux:*:*)
+	LIBC=gnu
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#ifdef __dietlibc__
+	LIBC=dietlibc
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+	exit ;;
     ia64:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
@@ -866,74 +914,33 @@ EOF
     m68*:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
-    mips:Linux:*:*)
+    mips:Linux:*:* | mips64:Linux:*:*)
 	eval $set_cc_for_build
 	sed 's/^	//' << EOF >$dummy.c
 	#undef CPU
-	#undef mips
-	#undef mipsel
+	#undef ${UNAME_MACHINE}
+	#undef ${UNAME_MACHINE}el
 	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mipsel
+	CPU=${UNAME_MACHINE}el
 	#else
 	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips
+	CPU=${UNAME_MACHINE}
 	#else
 	CPU=
 	#endif
 	#endif
 EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
-	;;
-    mips64:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef mips64
-	#undef mips64el
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mips64el
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips64
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
 	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
 	;;
     or32:Linux:*:*)
 	echo or32-unknown-linux-gnu
 	exit ;;
-    ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-gnu
 	exit ;;
-    ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
-	exit ;;
-    alpha:Linux:*:*)
-	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-	  EV5)   UNAME_MACHINE=alphaev5 ;;
-	  EV56)  UNAME_MACHINE=alphaev56 ;;
-	  PCA56) UNAME_MACHINE=alphapca56 ;;
-	  PCA57) UNAME_MACHINE=alphapca56 ;;
-	  EV6)   UNAME_MACHINE=alphaev6 ;;
-	  EV67)  UNAME_MACHINE=alphaev67 ;;
-	  EV68*) UNAME_MACHINE=alphaev68 ;;
-        esac
-	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-gnu
 	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
@@ -943,8 +950,11 @@ EOF
 	  *)    echo hppa-unknown-linux-gnu ;;
 	esac
 	exit ;;
-    parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-gnu
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-gnu
 	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
 	echo ${UNAME_MACHINE}-ibm-linux
@@ -958,6 +968,9 @@ EOF
     sparc:Linux:*:* | sparc64:Linux:*:*)
 	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
+    tile*:Linux:*:*)
+	echo ${UNAME_MACHINE}-tilera-linux-gnu
+	exit ;;
     vax:Linux:*:*)
 	echo ${UNAME_MACHINE}-dec-linux-gnu
 	exit ;;
@@ -965,71 +978,8 @@ EOF
 	echo x86_64-unknown-linux-gnu
 	exit ;;
     xtensa*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
 	exit ;;
-    i*86:Linux:*:*)
-	# The BFD linker knows what the default object file format is, so
-	# first see if it will tell us. cd to the root directory to prevent
-	# problems with other programs or directories called `ld' in the path.
-	# Set LC_ALL=C to ensure ld outputs messages in English.
-	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
-			 | sed -ne '/supported targets:/!d
-				    s/[ 	][ 	]*/ /g
-				    s/.*supported targets: *//
-				    s/ .*//
-				    p'`
-        case "$ld_supported_targets" in
-	  elf32-i386)
-		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
-		;;
-	  a.out-i386-linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit ;;
-	  coff-i386)
-		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit ;;
-	  "")
-		# Either a pre-BFD a.out linker (linux-gnuoldld) or
-		# one that does not give us useful --help.
-		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
-		exit ;;
-	esac
-	# Determine whether the default compiler is a.out or elf
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <features.h>
-	#ifdef __ELF__
-	# ifdef __GLIBC__
-	#  if __GLIBC__ >= 2
-	LIBC=gnu
-	#  else
-	LIBC=gnulibc1
-	#  endif
-	# else
-	LIBC=gnulibc1
-	# endif
-	#else
-	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
-	LIBC=gnu
-	#else
-	LIBC=gnuaout
-	#endif
-	#endif
-	#ifdef __dietlibc__
-	LIBC=dietlibc
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^LIBC/{
-		s: ::g
-		p
-	    }'`"
-	test x"${LIBC}" != x && {
-		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
-		exit
-	}
-	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
-	;;
     i*86:DYNIX/ptx:4*:*)
 	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
 	# earlier versions are messed up and put the nodename in both
@@ -1058,7 +1008,7 @@ EOF
     i*86:syllable:*:*)
 	echo ${UNAME_MACHINE}-pc-syllable
 	exit ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
 	echo i386-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
     i*86:*DOS:*:*)
@@ -1102,8 +1052,11 @@ EOF
     pc:*:*:*)
 	# Left here for compatibility:
         # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i386.
-	echo i386-pc-msdosdjgpp
+        # the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configury will decide that
+	# this is a cross-build.
+	echo i586-pc-msdosdjgpp
         exit ;;
     Intel:Mach:3*:*)
 	echo i386-pc-mach3
@@ -1141,6 +1094,16 @@ EOF
     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
         /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
           && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
     m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
 	echo m68k-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
@@ -1153,7 +1116,7 @@ EOF
     rs6000:LynxOS:2.*:*)
 	echo rs6000-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
 	echo powerpc-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
     SM[BE]S:UNIX_SV:*:*)
@@ -1216,6 +1179,9 @@ EOF
     BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
 	echo i586-pc-beos
 	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
 	exit ;;
@@ -1243,6 +1209,16 @@ EOF
     *:Darwin:*:*)
 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
 	case $UNAME_PROCESSOR in
+	    i386)
+		eval $set_cc_for_build
+		if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+		  if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		      (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		      grep IS_64BIT_ARCH >/dev/null
+		  then
+		      UNAME_PROCESSOR="x86_64"
+		  fi
+		fi ;;
 	    unknown) UNAME_PROCESSOR=powerpc ;;
 	esac
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
@@ -1324,6 +1300,9 @@ EOF
     i*86:rdos:*:*)
 	echo ${UNAME_MACHINE}-pc-rdos
 	exit ;;
+    i*86:AROS:*:*)
+	echo ${UNAME_MACHINE}-pc-aros
+	exit ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2

config.sub

@@ -1,10 +1,10 @@
 #! /bin/sh
 # Configuration validation subroutine script.
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
 #   Free Software Foundation, Inc.
 
-timestamp='2008-01-16'
+timestamp='2010-09-11'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -32,13 +32,16 @@ timestamp='2008-01-16'
 
 
 # Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
+# diff and a properly formatted GNU ChangeLog entry.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
 # If it is invalid, we print an error message on stderr and exit with code 1.
 # Otherwise, we print the canonical config type on stdout and succeed.
 
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
 # This file is supposed to be the same for all GNU packages
 # and recognize all the CPU types, system types and aliases
 # that are meaningful with *any* GNU software.
@@ -72,8 +75,9 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
+Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -120,8 +124,10 @@ esac
 # Here we must recognize all the valid KERNEL-OS combinations.
 maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
-  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+  linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  knetbsd*-gnu* | netbsd*-gnu* | \
+  kopensolaris*-gnu* | \
   storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
@@ -148,10 +154,13 @@ case $os in
 	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
 	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
 	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray)
+	-apple | -axis | -knuth | -cray | -microblaze)
 		os=
 		basic_machine=$1
 		;;
+        -bluegene*)
+	        os=-cnk
+		;;
 	-sim | -cisco | -oki | -wec | -winbond)
 		os=
 		basic_machine=$1
@@ -249,13 +258,16 @@ case $basic_machine in
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
+	| lm32 \
 	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore | mep \
+	| maxq | mb | microblaze | mcore | mep | metag \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
-	| mips64vr | mips64vrel \
+	| mips64octeon | mips64octeonel \
 	| mips64orion | mips64orionel \
+	| mips64r5900 | mips64r5900el \
+	| mips64vr | mips64vrel \
 	| mips64vr4100 | mips64vr4100el \
 	| mips64vr4300 | mips64vr4300el \
 	| mips64vr5000 | mips64vr5000el \
@@ -268,28 +280,41 @@ case $basic_machine in
 	| mipsisa64sr71k | mipsisa64sr71kel \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
+	| moxie \
 	| mt \
 	| msp430 \
+	| nds32 | nds32le | nds32be \
 	| nios | nios2 \
 	| ns16k | ns32k \
 	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
+	| rx \
 	| score \
-	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
 	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
 	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
 	| spu | strongarm \
-	| tahoe | thumb | tic4x | tic80 | tron \
+	| tahoe | thumb | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+	| ubicom32 \
 	| v850 | v850e \
 	| we32k \
 	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
-	| z8k)
+	| z8k | z80)
 		basic_machine=$basic_machine-unknown
 		;;
-	m6811 | m68hc11 | m6812 | m68hc12)
+	c54x)
+		basic_machine=tic54x-unknown
+		;;
+	c55x)
+		basic_machine=tic55x-unknown
+		;;
+	c6x)
+		basic_machine=tic6x-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12 | picochip)
 		# Motorola 68HC11/12.
 		basic_machine=$basic_machine-unknown
 		os=-none
@@ -320,7 +345,7 @@ case $basic_machine in
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
 	| avr-* | avr32-* \
 	| bfin-* | bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* \
 	| clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
 	| elxsi-* \
@@ -329,14 +354,17 @@ case $basic_machine in
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
+	| lm32-* \
 	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
-	| mips64vr-* | mips64vrel-* \
+	| mips64octeon-* | mips64octeonel-* \
 	| mips64orion-* | mips64orionel-* \
+	| mips64r5900-* | mips64r5900el-* \
+	| mips64vr-* | mips64vrel-* \
 	| mips64vr4100-* | mips64vr4100el-* \
 	| mips64vr4300-* | mips64vr4300el-* \
 	| mips64vr5000-* | mips64vr5000el-* \
@@ -351,27 +379,30 @@ case $basic_machine in
 	| mmix-* \
 	| mt-* \
 	| msp430-* \
+	| nds32-* | nds32le-* | nds32be-* \
 	| nios-* | nios2-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
-	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| romp-* | rs6000-* | rx-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
 	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
 	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
 	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tile-* | tilegx-* \
 	| tron-* \
+	| ubicom32-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
 	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
 	| xstormy16-* | xtensa*-* \
 	| ymp-* \
-	| z8k-*)
+	| z8k-* | z80-*)
 		;;
 	# Recognize the basic CPU types without company name, with glob match.
 	xtensa*)
@@ -439,6 +470,10 @@ case $basic_machine in
 		basic_machine=m68k-apollo
 		os=-bsd
 		;;
+	aros)
+		basic_machine=i386-pc
+		os=-aros
+		;;
 	aux)
 		basic_machine=m68k-apple
 		os=-aux
@@ -455,10 +490,27 @@ case $basic_machine in
 		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
 		os=-linux
 		;;
+	bluegene*)
+		basic_machine=powerpc-ibm
+		os=-cnk
+		;;
+	c54x-*)
+		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c55x-*)
+		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c6x-*)
+		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
 	c90)
 		basic_machine=c90-cray
 		os=-unicos
 		;;
+        cegcc)
+		basic_machine=arm-unknown
+		os=-cegcc
+		;;
 	convex-c1)
 		basic_machine=c1-convex
 		os=-bsd
@@ -526,6 +578,10 @@ case $basic_machine in
 		basic_machine=m88k-motorola
 		os=-sysv3
 		;;
+	dicos)
+		basic_machine=i686-pc
+		os=-dicos
+		;;
 	djgpp)
 		basic_machine=i586-pc
 		os=-msdosdjgpp
@@ -699,6 +755,9 @@ case $basic_machine in
 		basic_machine=ns32k-utek
 		os=-sysv
 		;;
+        microblaze)
+		basic_machine=microblaze-xilinx
+		;;
 	mingw32)
 		basic_machine=i386-pc
 		os=-mingw32
@@ -803,6 +862,12 @@ case $basic_machine in
 	np1)
 		basic_machine=np1-gould
 		;;
+        neo-tandem)
+		basic_machine=neo-tandem
+		;;
+        nse-tandem)
+		basic_machine=nse-tandem
+		;;
 	nsr-tandem)
 		basic_machine=nsr-tandem
 		;;
@@ -1037,17 +1102,10 @@ case $basic_machine in
 		basic_machine=t90-cray
 		os=-unicos
 		;;
-	tic54x | c54x*)
-		basic_machine=tic54x-unknown
-		os=-coff
-		;;
-	tic55x | c55x*)
-		basic_machine=tic55x-unknown
-		os=-coff
-		;;
-	tic6x | c6x*)
-		basic_machine=tic6x-unknown
-		os=-coff
+        # This must be matched before tile*.
+        tilegx*)
+		basic_machine=tilegx-unknown
+		os=-linux-gnu
 		;;
 	tile*)
 		basic_machine=tile-unknown
@@ -1128,6 +1186,10 @@ case $basic_machine in
 		basic_machine=z8k-unknown
 		os=-sim
 		;;
+	z80-*-coff)
+		basic_machine=z80-unknown
+		os=-sim
+		;;
 	none)
 		basic_machine=none-none
 		os=-none
@@ -1166,7 +1228,7 @@ case $basic_machine in
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
+	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
 	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
@@ -1216,6 +1278,9 @@ case $os in
         # First match some system type aliases
         # that might get confused with valid system types.
 	# -solaris* is a basic system type, with this one exception.
+        -auroraux)
+	        os=-auroraux
+		;;
 	-solaris1 | -solaris1.*)
 		os=`echo $os | sed -e 's|solaris1|sunos4|'`
 		;;
@@ -1236,10 +1301,11 @@ case $os in
 	# Each alternative MUST END IN A *, to match a version number.
 	# -sysv* is not here because it comes later, after sysvr4.
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
-	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+	      | -sym* | -kopensolaris* \
 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* \
+	      | -aos* | -aros* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
 	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
@@ -1248,9 +1314,10 @@ case $os in
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* \
+	      | -chorusos* | -chorusrdb* | -cegcc* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+	      | -mingw32* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-uclibc* \
 	      | -uxpv* | -beos* | -mpeix* | -udk* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
@@ -1258,7 +1325,7 @@ case $os in
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1388,6 +1455,11 @@ case $os in
 	-zvmoe)
 		os=-zvmoe
 		;;
+	-dicos*)
+		os=-dicos
+		;;
+        -nacl*)
+	        ;;
 	-none)
 		;;
 	*)
@@ -1428,6 +1500,15 @@ case $basic_machine in
         c4x-* | tic4x-*)
         	os=-coff
 		;;
+	tic54x-*)
+		os=-coff
+		;;
+	tic55x-*)
+		os=-coff
+		;;
+	tic6x-*)
+		os=-coff
+		;;
 	# This must come before the *-dec entry.
 	pdp10-*)
 		os=-tops20
@@ -1585,7 +1666,7 @@ case $basic_machine in
 			-sunos*)
 				vendor=sun
 				;;
-			-aix*)
+			-cnk*|-aix*)
 				vendor=ibm
 				;;
 			-beos*)

configure.ac

@@ -1,7 +1,7 @@
 #                                               -*- Autoconf -*-
 # Process this file with autoconf to produce a configure script.
 # Minimum version of autoconf required
-AC_PREREQ(2.60)
+AC_PREREQ(2.62)
 
 # UPDATING VERSION NUMBERS FOR RELEASES
 #
@@ -41,12 +41,12 @@ AC_PREREQ(2.60)
 #   Bugfix releases:
 #     pacman_version_micro += 1
 
-m4_define([lib_current], [4])
+m4_define([lib_current], [6])
 m4_define([lib_revision], [0])
 m4_define([lib_age], [0])
 
 m4_define([pacman_version_major], [3])
-m4_define([pacman_version_minor], [3])
+m4_define([pacman_version_minor], [5])
 m4_define([pacman_version_micro], [0])
 m4_define([pacman_version],
           [pacman_version_major.pacman_version_minor.pacman_version_micro])
@@ -70,7 +70,7 @@ AC_DEFINE_UNQUOTED([LIB_VERSION], ["$LIB_VERSION"], [libalpm version number])
 
 # Help line for root directory
 AC_ARG_WITH(root-dir,
-	AS_HELP_STRING([--with-root-dir=path], [set the location of pacman's root operating directory]),
+	AS_HELP_STRING([--with-root-dir=path], [set the location of the root operating directory]),
 	[ROOTDIR=$withval], [ROOTDIR=/])
 
 # Help line for package extension
@@ -83,20 +83,20 @@ AC_ARG_WITH(src-ext,
 	AS_HELP_STRING([--with-src-ext=ext], [set the file extension used by source packages]),
 	[SRCEXT=$withval], [SRCEXT=.src.tar.gz])
 
-# Help line for database extension
-AC_ARG_WITH(db-ext,
-	AS_HELP_STRING([--with-db-ext=ext], [set the file extension used by the database]),
-	[DBEXT=$withval], [DBEXT=.db.tar.gz])
-
 # Help line for buildscript filename
 AC_ARG_WITH(buildscript,
 	AS_HELP_STRING([--with-buildscript=name], [set the build script name used by makepkg]),
 	[BUILDSCRIPT=$withval], [BUILDSCRIPT=PKGBUILD])
 
+# Help line for using OpenSSL
+AC_ARG_WITH(openssl,
+	AS_HELP_STRING([--with-openssl], [use OpenSSL crypto implementations instead of internal routines]),
+	[], [with_openssl=check])
+
 # Help line for libfetch
-AC_ARG_ENABLE(internal-download,
-	AS_HELP_STRING([--disable-internal-download], [do not build with libfetch support]),
-	[internaldownload=$enableval], [internaldownload=yes])
+AC_ARG_WITH(fetch,
+	AS_HELP_STRING([--with-fetch], [use libfetch as an internal downloader]),
+	[], [with_fetch=check])
 
 # Help line for documentation
 AC_ARG_ENABLE(doc,
@@ -126,7 +126,8 @@ AC_PROG_INSTALL
 AC_PROG_LN_S
 AC_PROG_MAKE_SET
 AC_PROG_LIBTOOL
-AC_CHECK_PROGS([PYTHON], [python2.6 python2.5 python], [false])
+AC_CHECK_PROGS([PYTHON], [python2.7 python2.6 python2.5 python2 python], [false])
+AC_PATH_PROGS([BASH_SHELL], [bash bash4 bash3], [false])
 
 # find installed gettext
 AM_GNU_GETTEXT([external])
@@ -136,21 +137,41 @@ AM_GNU_GETTEXT_VERSION(0.13.1)
 AC_CHECK_LIB([archive], [archive_read_data], ,
 	AC_MSG_ERROR([libarchive is needed to compile pacman!]))
 
+# Check for OpenSSL
+AC_MSG_CHECKING(whether to link with libssl)
+AS_IF([test "x$with_openssl" != "xno"],
+	[AC_MSG_RESULT(yes)
+	AC_CHECK_LIB([ssl], [MD5_Final], ,
+	[if test "x$with_openssl" != "xcheck"; then
+		AC_MSG_FAILURE([--with-openssl was given, but -lssl was not found])
+	fi],
+	[-lcrypto])],
+	AC_MSG_RESULT(no))
+AM_CONDITIONAL([HAVE_LIBSSL], [test "x$ac_cv_lib_ssl_MD5_Final" = "xyes"])
+
 # Enable or disable usage of libfetch
 AC_MSG_CHECKING(whether to link with libfetch)
-if test "x$internaldownload" = "xyes" ; then
-	AC_MSG_RESULT(yes)
-	AC_DEFINE([INTERNAL_DOWNLOAD], , [Use internal download library])
-	# Check for a download library if it was actually requested
+AS_IF([test "x$with_fetch" != "xno"],
+	[AC_MSG_RESULT(yes)
 	AC_CHECK_LIB([fetch], [fetchParseURL], ,
-		AC_MSG_ERROR([libfetch is needed to compile with internal download support]) )
-else
-	AC_MSG_RESULT(no)
-fi
-AM_CONDITIONAL(INTERNAL_DOWNLOAD, test "x$internaldownload" = "xyes")
+	[if test "x$with_fetch" != "xcheck"; then
+		AC_MSG_FAILURE([--with-fetch was given, but -lfetch was not found])
+	fi],
+	[-lcrypto -ldl])
+	# Check if libfetch supports connnection caching which we use
+	AS_IF([test "x$ac_cv_lib_fetch_fetchParseURL" = "xyes"],
+	[AC_CHECK_DECL(fetchConnectionCacheInit, ,
+		AC_MSG_ERROR([libfetch must be version 2.28 or greater]),
+		[#include <fetch.h>])
+	])
+	],
+	AC_MSG_RESULT(no))
+AM_CONDITIONAL([HAVE_LIBFETCH], [test "x$ac_cv_lib_fetch_fetchParseURL" = "xyes"])
 
 # Checks for header files.
-AC_CHECK_HEADERS([fcntl.h libintl.h limits.h locale.h string.h strings.h sys/ioctl.h sys/param.h sys/statvfs.h sys/syslimits.h sys/time.h syslog.h wchar.h])
+AC_CHECK_HEADERS([fcntl.h glob.h libintl.h locale.h mntent.h string.h \
+                  sys/ioctl.h sys/mount.h sys/param.h sys/statvfs.h \
+                  sys/time.h sys/types.h sys/ucred.h syslog.h wchar.h])
 
 # Checks for typedefs, structures, and compiler characteristics.
 AC_C_INLINE
@@ -160,15 +181,22 @@ AC_TYPE_PID_T
 AC_TYPE_SIZE_T
 AC_STRUCT_TM
 AC_TYPE_UID_T
+AC_STRUCT_DIRENT_D_TYPE
+PATH_MAX_DEFINED
 
 # Checks for library functions.
 AC_FUNC_FORK
+AC_FUNC_GETMNTENT
 AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK
 AC_FUNC_MKTIME
-AC_TYPE_SIGNAL
-AC_CHECK_FUNCS([geteuid realpath regcomp strcasecmp \
+AC_CHECK_FUNCS([geteuid getmntinfo realpath regcomp strcasecmp \
                 strndup strrchr strsep swprintf \
                 wcwidth uname])
+# For the diskspace code
+FS_STATS_TYPE
+AC_CHECK_MEMBERS([struct statvfs.f_flag],,,[[#include <sys/statvfs.h>]])
+AC_CHECK_MEMBERS([struct statfs.f_flags],,,[[#include <sys/param.h>
+                  #include <sys/mount.h>]])
 
 # Enable large file support if available
 AC_SYS_LARGEFILE
@@ -179,11 +207,14 @@ GCC_VISIBILITY_CC
 GCC_GNU89_INLINE_CC
 
 # Host-dependant definitions
-SIZECMD="stat -c %s"
+SIZECMD="stat -L -c %s"
 SEDINPLACE="sed -i"
+STRIP_BINARIES="--strip-all"
+STRIP_SHARED="--strip-unneeded"
+STRIP_STATIC="--strip-debug"
 case "${host_os}" in
 	*bsd*)
-		SIZECMD="stat -f %z"
+		SIZECMD="stat -L -f %z"
 		SEDINPLACE="sed -i ''"
 		;;
 	cygwin*)
@@ -192,15 +223,22 @@ case "${host_os}" in
 		;;
 	darwin*)
 		host_os_darwin=yes
-		SIZECMD="/usr/bin/stat -f %z"
+		SIZECMD="/usr/bin/stat -L -f %z"
 		SEDINPLACE="/usr/bin/sed -i ''"
+		STRIP_BINARIES=""
+		STRIP_SHARED="-S"
+		STRIP_STATIC="-S"
 		;;
 esac
 
 AM_CONDITIONAL([CYGWIN], test "x$host_os_cygwin" = "xyes")
 AM_CONDITIONAL([DARWIN], test "x$host_os_darwin" = "xyes")
+AC_PATH_PROGS([DUPATH], [du], [du], [/usr/bin$PATH_SEPARATOR/bin] )
 AC_SUBST(SIZECMD)
 AC_SUBST(SEDINPLACE)
+AC_SUBST(STRIP_BINARIES)
+AC_SUBST(STRIP_SHARED)
+AC_SUBST(STRIP_STATIC)
 
 # Check for architecture, used in default makepkg.conf
 # (Note single space left after CARCHFLAGS)
@@ -247,9 +285,15 @@ AC_SUBST(CARCHFLAGS)
 AC_SUBST(CHOST)
 
 # Check for documentation support and status
+AC_CHECK_PROGS([ASCIIDOC], [asciidoc])
 AC_MSG_CHECKING([for building documentation])
 if test "x$wantdoc" = "xyes" ; then
-	AC_MSG_RESULT([yes])
+	if test $ASCIIDOC ; then
+		AC_MSG_RESULT([yes, enabled by configure])
+	else
+		asciidoc="(warning : asciidoc not installed)"
+		AC_MSG_RESULT([yes $asciidoc])
+	fi
 	wantdoc=yes
 else
 	AC_MSG_RESULT([no, disabled by configure])
@@ -284,17 +328,18 @@ if test "x$debug" = "xyes" ; then
 	# Check for -fstack-protector availability
 	GCC_STACK_PROTECT_LIB
 	GCC_STACK_PROTECT_CC
-	CFLAGS="$CFLAGS -Wall -Werror"
+	GCC_FORTIFY_SOURCE_CC
+	CFLAGS="$CFLAGS -g -Wall -Werror"
 else
 	AC_MSG_RESULT(no)
 	CFLAGS="$CFLAGS -Wall"
 fi
 
 # Enable or disable use of git version in pacman version string
-AC_CHECK_PROGS([GIT], [git])
-AC_CHECK_FILE([.git/], hasgitdir=yes)
 AC_MSG_CHECKING(whether to use git version if available)
 if test "x$wantgitver" = "xyes" ; then
+	AC_CHECK_PROGS([GIT], [git])
+	AC_CHECK_FILE([.git/], hasgitdir=yes)
 	if test $GIT -a "x$hasgitdir" = "xyes"; then
 		AC_MSG_RESULT([yes])
 		usegitver=yes
@@ -317,9 +362,6 @@ AC_DEFINE_UNQUOTED([PKGEXT], "$PKGEXT", [The file extension used by pacman packa
 # Set source package file extension
 AC_SUBST(SRCEXT)
 AC_DEFINE_UNQUOTED([SRCEXT], "$SRCEXT", [The file extension used by pacman source packages])
-# Set database file extension
-AC_SUBST(DBEXT)
-AC_DEFINE_UNQUOTED([DBEXT], "$DBEXT", [The file extension used by pacman databases])
 # Set makepkg build script name
 AC_SUBST(BUILDSCRIPT)
 AC_DEFINE_UNQUOTED([BUILDSCRIPT], "$BUILDSCRIPT", [The build script name used by makepkg])
@@ -334,8 +376,9 @@ scripts/Makefile
 doc/Makefile
 etc/Makefile
 po/Makefile.in
-pactest/Makefile
-pactest/tests/Makefile
+test/pacman/Makefile
+test/pacman/tests/Makefile
+test/util/Makefile
 contrib/Makefile
 Makefile
 ])
@@ -371,12 +414,10 @@ ${PACKAGE_NAME}:
     root working directory : ${ROOTDIR}
     package extension      : ${PKGEXT}
     source pkg extension   : ${SRCEXT}
-    database extension     : ${DBEXT}
     build script name      : ${BUILDSCRIPT}
 
   Compilation options:
-    Run make in doc/ dir   : ${wantdoc}
-    Use download library   : ${internaldownload}
+    Run make in doc/ dir   : ${wantdoc} ${asciidoc}
     Doxygen support        : ${usedoxygen}
     debug support          : ${debug}
 "

contrib/.gitignore

@@ -0,0 +1,8 @@
+bacman
+bash_completion
+pacdiff
+paclist
+pacscripts
+pacsearch
+wget-xdelta.sh
+zsh_completion

contrib/Makefile.am

@@ -1,17 +1,61 @@
-EXTRA_DIST = \
-	PKGBUILD.vim \
+OURSCRIPTS = \
 	bacman \
-	bash_completion \
-	gensync \
 	pacdiff \
 	paclist \
 	pacscripts \
 	pacsearch \
-	pactree \
-	updatesync \
+	wget-xdelta.sh
+
+OURFILES = \
+	bash_completion \
+	zsh_completion
+
+EXTRA_DIST = \
+	PKGBUILD.vim \
+	bacman.in \
+	bash_completion.in \
+	pacdiff.in \
+	paclist.in \
+	pacscripts.in \
+	pacsearch.in \
 	vimprojects \
-	wget-xdelta.sh \
-	zsh_completion \
+	wget-xdelta.sh.in \
+	zsh_completion.in \
 	README
 
+# Files that should be removed, but which Automake does not know.
+MOSTLYCLEANFILES = $(OURSCRIPTS) $(OURFILES) *.tmp
+
+edit = sed \
+	-e 's|@sysconfdir[@]|$(sysconfdir)|g' \
+	-e 's|@localstatedir[@]|$(localstatedir)|g' \
+	-e 's|@BASH_SHELL[@]|$(BASH_SHELL)|g'
+
+$(OURSCRIPTS): Makefile
+	@echo '    ' GEN $@;
+	@rm -f $@ $@.tmp
+	@$(edit) $(srcdir)/$@.in >$@.tmp
+	@chmod +x $@.tmp
+	@chmod a-w $@.tmp
+	@mv $@.tmp $@
+
+$(OURFILES): Makefile
+	@echo '    ' GEN $@;
+	@rm -f $@ $@.tmp
+	@$(edit) $(srcdir)/$@.in >$@.tmp
+	@chmod a-w $@.tmp
+	@mv $@.tmp $@
+
+all-am: $(OURSCRIPTS) $(OURFILES)
+
+bacman: $(srcdir)/bacman.in
+bash_completion: $(srcdir)/bash_completion.in
+pacdiff: $(srcdir)/pacdiff.in
+paclist: $(srcdir)/paclist.in
+pacscripts: $(srcdir)/pacscripts.in
+pacsearch: $(srcdir)/pacsearch.in
+pactree: $(srcdir)/pactree.in
+wget-xdelta.sh: $(srcdir)/wget-xdelta.sh.in
+zsh_completion: $(srcdir)/zsh_completion.in
+
 # vim:set ts=2 sw=2 noet:

contrib/PKGBUILD.vim

@@ -25,6 +25,13 @@ syn match pbValidPkgname /\([[:alnum:]]\|+\|-\|_\){,32}/ contained contains=pbIl
 syn match pbIllegalPkgname /[[:upper:]]\|[^[:alnum:]-+_=]\|=.*=\|=['"]\?.\{33,\}['"]\?/ contained
 syn match pbPkgnameGroup /^pkgname=.*/ contains=pbIllegalPkgname,pb_k_pkgname,shDoubleQuote,shSingleQuote
 
+" pkgbase
+" FIXME if '=' is in pkgbase/pkgname/pkgver, it highlights whole string, not just '='
+syn keyword pb_k_pkgbase pkgbase contained
+syn match pbValidPkgbase /\([[:alnum:]]\|+\|-\|_\){,32}/ contained contains=pbIllegalPkgbase
+syn match pbIllegalPkgbase /[[:upper:]]\|[^[:alnum:]-+_=]\|=.*=\|=['"]\?.\{33,\}['"]\?/ contained
+syn match pbPkgbaseGroup /^pkgbase=.*/ contains=pbIllegalPkgbase,pb_k_pkgbase,shDoubleQuote,shSingleQuote
+
 " pkgver
 syn keyword pb_k_pkgver pkgver contained
 syn match pbValidPkgver /\([[:alnum:]]\|\.\|+\|_\)/ contained contains=pbIllegalPkgver
@@ -33,7 +40,7 @@ syn match pbPkgverGroup /^pkgver=.*/ contains=pbIllegalPkgver,pbValidPkgver,pb_k
 
 " pkgrel
 syn keyword pb_k_pkgrel pkgrel contained
-syn match pbValidPkgrel /[[:digit:]]*/ contained contains=pbIllegalPkgver
+syn match pbValidPkgrel /[[:digit:]]*/ contained contains=pbIllegalPkgrel
 syn match pbIllegalPkgrel /[^[:digit:]=]\|=.*=/ contained
 syn match pbPkgrelGroup /^pkgrel=.*/ contains=pbIllegalPkgrel,pbValidPkgrel,pb_k_pkgrel,shDoubleQuote,shSingleQuote
 
@@ -45,6 +52,12 @@ syn match pbValidPkgdesc /[^='"]\.\{,80}/ contained contains=pbIllegalPkgdesc
 syn match pbPkgdescGroup /^pkgdesc=.*/ contains=pbIllegalPkgdesc,pb_k_desc,pbValidPkgdesc,shDoubleQuote,shSingleQuote
 syn match pbPkgdescSign /[='"]/ contained
 
+" epoch
+syn keyword pb_k_epoch epoch contained
+syn match pbValidEpoch /[[:digit:]]*/ contained contains=pbIllegalEpoch
+syn match pbIllegalEpoch /[^[:digit:]=]\|=.*=/ contained
+syn match pbEpochGroup /^epoch=.*/ contains=pbIllegalEpoch,pbValidEpoch,pb_k_epoch,shDoubleQuote,shSingleQuote
+
 " url
 syn keyword pb_k_url url contained
 syn match pbValidUrl /['"]*\(https\|http\|ftp\)\:\/.*\.\+.*/ contained
@@ -54,10 +67,13 @@ syn match pbUrlGroup /^url=.*/ contains=pbValidUrl,pb_k_url,pbIllegalUrl,shDoubl
 
 " license
 syn keyword pb_k_license license contained
-syn keyword pbLicense  APACHE CDDL EPL FDL GPL LGPL MPL PHP RUBY ZLIB ISC MIT BSD contained
+" echo $(pacman -Ql licenses | grep '/usr/share/licenses/common/' | cut -d'/' -f6 | sort -u)
+syn keyword pbLicense  APACHE CCPL CDDL CPL EPL FDL FDL1.2 FDL1.3 GPL GPL2 GPL3 LGPL LGPL2.1 LGPL3 LPPL MPL PerlArtistic PHP PSF RALINK RUBY ZPL contained
+" special cases from http://wiki.archlinux.org/index.php/Arch_Packaging_Standards
+syn keyword pbLicenseSpecial  BSD MIT ZLIB Python contained
 syn match pbLicenseCustom /custom\(:[[:alnum:]]*\)*/ contained
-syn match pbIllegalLicense /[^='"() ]/ contained contains=pbLicenseCustom,pbLicense
-syn region pbLicenseGroup start=/^license=(/ end=/)/ contains=pb_k_license,pbLicenseCustom,pbLicense,pbIllegalLicense
+syn match pbIllegalLicense /[^='"() ]/ contained contains=pbLicenseCustom,pbLicenseSpecial,pbLicense
+syn region pbLicenseGroup start=/^license=(/ end=/)/ contains=pb_k_license,pbLicenseCustom,pbLicenseSpecial,pbLicense,pbIllegalLicense
 
 " backup
 syn keyword pb_k_backup backup contained
@@ -66,7 +82,7 @@ syn region pbBackupGroup start=/^backup=(/ end=/)/ contains=pb_k_backup,pbValidB
 
 " arch
 syn keyword pb_k_arch arch contained
-syn keyword pbArch i686 x86_64 ppc contained
+syn keyword pbArch i686 x86_64 ppc any contained
 syn match pbIllegalArch /[^='"() ]/ contained contains=pbArch
 syn region pbArchGroup start=/^arch=(/ end=/)/ contains=pb_k_arch,pbArch,pbIllegalArch
 
@@ -115,6 +131,12 @@ syn match pbValidInstall /\([[:alnum:]]\|\$\|+\|-\|_\)*\.install/ contained
 syn match pbIllegalInstall /[^=]/ contained contains=pbValidInstall
 syn match pbInstallGroup /^install=.*/ contains=pb_k_install,pbValidInstall,pbIllegalInstall,shDeref,shDoubleQuote,shSingleQuote
 
+" changelog
+syn keyword pb_k_changelog changelog contained
+syn match pbValidChangelog /\([[:alnum:]]\|\$\|+\|-\|_\)*/ contained
+syn match pbIllegalChangelog /[^=]/ contained contains=pbValidChangelog
+syn match pbChangelogGroup /^changelog=.*/ contains=pb_k_changelog,pbValidChangelog,pbIllegalChangelog,shDeref,shDoubleQuote,shSingleQuote
+
 " source:
 " XXX remove source from shStatement, fix strange bug
 syn clear shStatement
@@ -127,13 +149,12 @@ syn match pbDerefEmulation /\$[{]\?[[:alnum:]_]*[}]\?/ contained
 hi def link pbDerefEmulation PreProc
 
 " md5sums
-
 syn keyword pb_k_md5sums md5sums contained
 syn match pbIllegalMd5sums /[^='"()\/ ]/ contained contains=pbValidMd5sums
-syn match pbValidMd5sums /[[:alnum:]]\{32\}/ contained
+syn match pbValidMd5sums /\x\{32\}/ contained
 syn region pbMd5sumsGroup start=/^md5sums/ end=/)/ contains=pb_k_md5sums,pbMd5Quotes,pbMd5Hash,pbIllegalMd5sums keepend
 syn match pbMd5Quotes /'.*'\|".*"/ contained contains=pbMd5Hash,pbIllegalMd5sums
-syn match pbMd5Hash /[[:alnum:]]\+/ contained contains=pbValidMd5sums
+syn match pbMd5Hash /\x\+/ contained contains=pbValidMd5sums
 hi def link pbMd5Quotes Keyword
 hi def link pbMd5Hash Error
 hi def link pbValidMd5sums  Number
@@ -141,17 +162,17 @@ hi def link pbValidMd5sums  Number
 " sha1sums
 syn keyword pb_k_sha1sums sha1sums contained
 syn match pbIllegalSha1sums /[^='"()\/ ]/ contained contains=pbValidSha1sums
-syn match pbValidSha1sums /[[:alnum:]]\{40\}/ contained
+syn match pbValidSha1sums /\x\{40\}/ contained
 syn region pbSha1sumsGroup start=/^sha1sums/ end=/)/ contains=pb_k_sha1sums,pbSha1Quotes,pbSha1Hash,pbIllegalSha1sums keepend
 syn match pbSha1Quotes /'.*'\|".*"/ contained contains=pbSha1Hash,pbIllegalSha1sums
-syn match pbSha1Hash /[[:alnum:]]\+/ contained contains=pbValidSha1sums
+syn match pbSha1Hash /\x\+/ contained contains=pbValidSha1sums
 hi def link pbSha1Quotes Keyword
 hi def link pbSha1Hash Error
 hi def link pbValidSha1sums  Number
 
 " options
 syn keyword pb_k_options options contained
-syn match pbOptions /\(no\)\?\(strip\|docs\|libtool\|emptydirs\|zipman\|ccache\|distcc\|makeflags\|force\)/ contained
+syn match pbOptions /\(no\)\?\(strip\|docs\|libtool\|emptydirs\|zipman\|ccache\|distcc\|makeflags\|buildflags\)/ contained
 syn match   pbOptionsNeg     /\!/ contained
 syn match   pbOptionsDeprec  /no/ contained
 syn region pbOptionsGroup start=/^options=(/ end=/)/ contains=pb_k_options,pbOptions,pbOptionsNeg,pbOptionsDeprec,pbIllegalOption,shDoubleQuote,shSingleQuote
@@ -181,6 +202,9 @@ hi def link pbTodo Todo
 hi def link pbIllegalPkgname Error
 hi def link pb_k_pkgname pbKeywords
 
+hi def link pbIllegalPkgbase Error
+hi def link pb_k_pkgbase pbKeywords
+
 hi def link pbIllegalPkgver Error
 hi def link pb_k_pkgver pbKeywords
 
@@ -212,6 +236,9 @@ hi def link pb_k_provides pbKeywords
 hi def link pbIllegalInstall Error
 hi def link pb_k_install pbKeywords
 
+hi def link pbIllegalChangelog Error
+hi def link pb_k_changelog pbKeywords
+
 hi def link pb_k_source pbKeywords
 hi def link pbIllegalSource Error
 

contrib/README

@@ -23,9 +23,6 @@ pacsearch - a colorized search combining both -Ss and -Qs output. Installed
 packages are easily identified with a *** and local-only packages are also
 listed.
 
-pactree - generate a dependency tree of an installed package in textual or
-graphical form (using graphviz).
-
 bacman - regenerate a pacman package based on installed files and the pacman
 database entries. Useful for reuse, or possible config file extension.
 
@@ -34,7 +31,3 @@ vimprojects - a project file for the vim project plugin.
 wget-xdelta.sh - A download script for pacman which allows binary deltas
 generated with makepkg to be used instead of downloading full binary packages.
 This should cut download sizes for some package upgrades significantly.
-
-gensync, updatesync - The former repository management scripts that have since
-been superseded by repo-add and repo-remove. They are here for posterity's
-sake, and to show how repo-add and repo-remove can be wrapped in other scripts.

contrib/bacman.in

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!@BASH_SHELL@
 #
 #   bacman: recreate a package from a running system
 #   This script rebuilds an already installed package using metadata
@@ -21,7 +21,7 @@
 #
 
 readonly progname="bacman"
-readonly progver="0.2.0"
+readonly progver="0.2.1"
 
 #
 # User Friendliness
@@ -67,27 +67,26 @@ fi
 #
 # Setting environmental variables
 #
-if [ ! -r /etc/pacman.conf ]; then
-    echo "ERROR: unable to read /etc/pacman.conf"
+if [ ! -r @sysconfdir@/pacman.conf ]; then
+    echo "ERROR: unable to read @sysconfdir@/pacman.conf"
     exit 1
 fi
 
-eval $(awk '/DBPath/ {print $1$2$3}' /etc/pacman.conf)
-pac_db="${DBPath:-/var/lib/pacman/}/local"
+eval $(awk '/DBPath/ {print $1$2$3}' @sysconfdir@/pacman.conf)
+pac_db="${DBPath:-@localstatedir@/lib/pacman/}/local"
 
-if [ ! -r /etc/makepkg.conf ]; then
-    echo "ERROR: unable to read /etc/makepkg.conf"
+if [ ! -r @sysconfdir@/makepkg.conf ]; then
+    echo "ERROR: unable to read @sysconfdir@/makepkg.conf"
     exit 1
 fi
 
-source "/etc/makepkg.conf"
+source "@sysconfdir@/makepkg.conf"
 if [ -r ~/.makepkg.conf ]; then
     source ~/.makepkg.conf
 fi
 
 pkg_arch=${CARCH:-'unknown'}
 pkg_dest="${PKGDEST:-$PWD}"
-pkg_ext=${PKGEXT:-'.pkg.tar.gz'}
 pkg_pkger=${PACKAGER:-'Unknown Packager'}
 
 pkg_name="$1"
@@ -137,7 +136,7 @@ while read i; do
                 bsdtar -cnf - "/$i" 2> /dev/null | bsdtar -xpf -
 
                 # Workaround to bsdtar not reporting a missing file as an error
-                if [ ! -e "$work_dir/$i" ] && [ -L "$work_dir/$i"]; then
+                if [ ! -e "$work_dir/$i" -a ! -L "$work_dir/$i" ]; then
                     echo ""
                     echo "ERROR: unable to add /$i to the package"
                     echo "       If your user does not have permssion to read this file then"
@@ -164,13 +163,6 @@ fi
 
 pkg_size=$(du -sk | awk '{print $1 * 1024}')
 
-if [ -f "$pkg_dir/install" ] ; then
-    cp "$pkg_dir/install" "$work_dir/.INSTALL"
-fi
-if  [ -f $pkg_dir/changelog ] ; then
-    cp "$pkg_dir/changelog" "$work_dir/.CHANGELOG"
-fi
-
 #
 # .PKGINFO stuff
 #
@@ -228,9 +220,6 @@ while read i; do
         %REPLACES%)
             echo "replaces = $i"    >> .PKGINFO
         ;;
-        %FORCE%)
-            echo "force = true" >> .PKGINFO
-        ;;
 
         # files
         %BACKUP%)
@@ -254,6 +243,17 @@ while read i; do
     esac
 done
 
+comp_files=".PKGINFO"
+
+if [ -f "$pkg_dir/install" ] ; then
+    cp "$pkg_dir/install" "$work_dir/.INSTALL"
+    comp_files+=" .INSTALL"
+fi
+if  [ -f $pkg_dir/changelog ] ; then
+    cp "$pkg_dir/changelog" "$work_dir/.CHANGELOG"
+    comp_files+=" .CHANGELOG"
+fi
+
 #
 # Fixes owner:group and permissions for .PKGINFO, .CHANGELOG, .INSTALL
 #
@@ -265,8 +265,31 @@ chmod 644 "$work_dir"/{.PKGINFO,.CHANGELOG,.INSTALL} 2> /dev/null
 #
 echo "Generating the package..."
 
+case "$PKGEXT" in
+	*tar.gz)  EXT=${PKGEXT%.gz} ;;
+	*tar.bz2) EXT=${PKGEXT%.bz2} ;;
+	*tar.xz)  EXT=${PKGEXT%.xz} ;;
+	*tar)     EXT=${PKGEXT} ;;
+	*) echo "WARNING: '%s' is not a valid archive extension." \
+	"$PKGEXT" ; EXT=$PKGEXT ;;
+esac
+
+pkg_file="$pkg_dest/$pkg_namver-$pkg_arch${PKGEXT}"
 ret=0
-bsdtar -czf "$pkg_dest/$pkg_namver-$pkg_arch$pkg_ext" $(ls -A) || ret=$?
+
+# when fileglobbing, we want * in an empty directory to expand to
+# the null string rather than itself
+shopt -s nullglob
+# TODO: Maybe this can be set globally for robustness
+shopt -s -o pipefail
+bsdtar -cf - $comp_files * |
+case "$PKGEXT" in
+    *tar.gz)  gzip -c -f -n ;;
+    *tar.bz2) bzip2 -c -f ;;
+    *tar.xz)  xz -c -z - ;;
+    *tar)     cat ;;
+esac > ${pkg_file} || ret=$?
+
 if [ $ret -ne 0 ]; then
     echo "ERROR: unable to write package to $pkg_dest"
     echo "       Maybe the disk is full or you do not have write access"

contrib/bash_completion

@@ -1,365 +0,0 @@
-# vim: set ft=sh ts=2 sw=2 et:
-# file: /etc/bash_completion.d/pacman
-
-# Bash completion for pacman
-# Original: Manolis Tzanidakis <mtzanidakis@freemail.gr>
-#
-# Distributed under the terms of the GNU General Public License, v2 or later.
-#
-
-## initial functions
-
-rem_selected ()
-{
-  # (Adapted from bash_completion by Ian Macdonald <ian@caliban.org>)
-  # This removes any options from the list of completions that have
-  # already been specified on the command line.
-  COMPREPLY=($(echo "${COMP_WORDS[@]}" | \
-    (while read -d ' ' i; do
-      [ "${i}" == "" ] && continue
-      # flatten array with spaces on either side,
-      # otherwise we cannot grep on word boundaries of
-      # first and last word
-      COMPREPLY=" ${COMPREPLY[@]} "
-      # remove word from list of completions
-      COMPREPLY=(${COMPREPLY/ ${i%% *} / })
-    done
-    echo ${COMPREPLY[@]})))
-  return 0
-}
-
-_available_repos ()
-{
-  COMPREPLY=( $( compgen -W "$(grep '\[' /etc/pacman.conf | grep -v -e 'options' -e '^#' | tr -d '[]' )" -- $cur ) )
-}
-
-_installed_pkgs ()
-{
-  local installed_pkgs
-  installed_pkgs=$( ls /var/lib/pacman/local/ )
-  COMPREPLY=( $( compgen -W "$( for i in $installed_pkgs; do echo ${i%-*-*}; done )" -- $cur ) )
-}
-
-_available_pkgs ()
-{
-  #find balks easilly on a find /foo/*/* type dir, especially one like
-  #   /var/lib/pacman/*/*
-  # This little change-up removes the find *and* only uses enabled repos
-  local available_pkgs
-  local enabled_repos
-  enabled_repos=$( grep '\[' /etc/pacman.conf | grep -v -e 'options' -e '^#' | tr -d '[]' )
-  available_pkgs=$( for r in $enabled_repos; do echo /var/lib/pacman/sync/$r/*; done )
-  COMPREPLY=( $( compgen -W "$( for i in $available_pkgs; do j=${i##*/}; echo ${j%-*-*}; done )" -- $cur ) )
-}
-
-_installed_groups ()
-{
-  local installed_groups
-  installed_groups=$( find /var/lib/pacman/local -name desc -exec sed -ne '/%GROUPS%/,/^$/{//d; p}' {} \; | sort -u )
-  COMPREPLY=( $( compgen -W "$( for i in $installed_groups; do echo ${i%-*-*}; done )" -- $cur ) )
-}
-
-_available_groups ()
-{
-  #find balks easilly on a find /foo/*/* type dir, especially one like
-  #   /var/lib/pacman/*/*
-  # This little change-up removes the find *and* only uses enabled repos
-  local available_groups
-  local enabled_repos
-  enabled_repos=$( grep '\[' /etc/pacman.conf | grep -v -e 'options' -e '^#' | tr -d '[]' )
-  available_groups=$( for r in $enabled_repos; do sed '/%GROUPS%/,/^$/{//d; p}' /var/lib/pacman/sync/$r/*/desc | sort -u; done )
-  COMPREPLY=( $( compgen -W "$( for i in $available_groups; do echo ${i%-*-*}; done )" -- $cur ) )
-}
-
-## makepkg completion
-
-_makepkg ()
-{
-  local cur prev
-  COMPREPLY=()
-  cur=${COMP_WORDS[COMP_CWORD]}
-  prev=${COMP_WORDS[COMP_CWORD-1]}
-
-  case "$prev" in
-    -p)
-      _filedir
-      return 0
-    ;;
-    --help|--cleancache)
-      COMPREPLY=''
-      return 0
-    ;;
-  esac
-
-  if [[ "$cur" == -* ]]; then
-    COMPREPLY=( $( compgen -W '\
-      -A --ignorearch \
-      -b --builddeps \
-      -c --clean \
-      -C --cleancache \
-      -d --nodeps \
-      -e --noextract \
-      -f --force \
-      -g --geninteg \
-      -h --help \
-      -i --install \
-      -L --log \
-      -m --nocolor \
-      -o --nobuild \
-      -p \
-      -r --rmdeps \
-      -s --syncdeps \
-      --asroot \
-      --source \
-      --noconfirm \
-      --noprogressbar' -- $cur ) )
-  fi
-
-  rem_selected
-}
-complete -o default -F _makepkg makepkg
-
-## pacman completion
-
-_instring ()
-{
-  str="${1}"
-  shift 1
-  for c in "${@}"; do
-    if [ $(expr index "${str}" "${c}") -gt 0 ]; then
-      return 0
-    fi
-  done
-  return 1
-}
-
-_pacman ()
-{
-  local a arg toparse op mod cur
-  COMPREPLY=()
-
-  # This argument parsing is done so we can check for flag existance later
-  #  right now it's a tad crappy, but does the job
-  for (( i=1; i < ${#COMP_WORDS[@]}-1; i++ )); do
-    a=${COMP_WORDS[i]}
-    arg="${a:0:2}"
-    toparse="${a:2}"
-
-    case "${arg}" in
-      -@(U|R|S|Q|h|V))
-        op="${arg/-}"
-        mod="${mod}${a:2}"
-        ;;
-      --)
-        arg="${a:2}"
-        case "${arg}" in
-          remove) op="R" ;;
-          upgrade) op="U" ;;
-          query) op="Q" ;;
-          sync) op="S" ;;
-          help) op="h" ;;
-          version) op="V" ;;
-          verbose) mod="${mod}v" ;;
-          root) mod="${mod}r" ;;
-          dbpath) mod="${mod}b" ;;
-          nodeps) mod="${mod}d" ;;
-          force) mod="${mod}f" ;;
-          groups) mod="${mod}g" ;;
-          info) mod="${mod}i" ;;
-          list) mod="${mod}l" ;;
-          print-uris) mod="${mod}p" ;;
-          search) mod="${mod}s" ;;
-          sysupgrade) mod="${mod}u" ;;
-          upgrades) mod="${mod}u" ;;
-          downloadonly) mod="${mod}w" ;;
-          refresh) mod="${mod}y" ;;
-          changelog) mod="${mod}c" ;;
-          deps) mod="${mod}d" ;;
-          explicit) mod="${mod}e" ;;
-          unrequired) mod="${mod}t" ;;
-          foreign) mod="${mod}m" ;;
-          owns) mod="${mod}o" ;;
-          file) mod="${mod}p" ;;
-          search) mod="${mod}s" ;;
-          upgrades) mod="${mod}u" ;;
-          cascade) mod="${mod}c" ;;
-          check) mod="${mod}k" ;;
-          dbonly) mod="${mod}k" ;;
-          nosave) mod="${mod}n" ;;
-          recursive) mod="${mod}s" ;;
-          unneeded) mod="${mod}u" ;;
-        esac ;;
-      *) toparse="${a}" ;;
-    esac
-
-    arglen=$(( ${#toparse}-1 ))
-    for c in $(seq 0 "${arglen}"); do
-      arg=${toparse:$c:1}
-      [ "${arg}" != "-" ] && mod="${mod}${arg}"
-    done
-  done
-
-  cur=${COMP_WORDS[COMP_CWORD]}
-
-  if [ $COMP_CWORD -eq 1 ] && [[ "$cur" == -* ]]; then
-    COMPREPLY=( $( compgen -W '\
-      -h --help \
-      -Q --query \
-      -R --remove \
-      -S --sync \
-      -U --upgrade \
-      -V --version \
-      ' -- $cur ) )
-    rem_selected
-    return 0
-  fi
-
-  if [[ "$cur" == -* ]]; then
-    case "${op}" in
-      U)
-        COMPREPLY=( $( compgen -W '\
-          --asdeps \
-          --asexplicit \
-          -d --nodeps \
-          -f --force \
-          -h --help \
-          --config \
-          --logfile \
-          --noconfirm \
-          --noprogressbar \
-          --noscriptlet \
-          -v --verbose \
-          -r --root \
-          -b --dbpath \
-          --cachedir \
-          ' -- $cur ) )
-        return 0
-        ;;
-      R)
-        COMPREPLY=( $( compgen -W '\
-          -c --cascade \
-          -d --nodeps \
-          -h --help \
-          -k --dbonly \
-          -n --nosave \
-          -s --recursive \
-          -u --unneeded \
-          --config \
-          --logfile \
-          --noconfirm \
-          --noprogressbar \
-          --noscriptlet \
-          -v --verbose \
-          -r --root \
-          -b --dbpath \
-          --cachedir \
-          ' -- $cur ) )
-        return 0
-        ;;
-      S)
-        COMPREPLY=( $( compgen -W '\
-          --asdeps \
-          --asexplicit \
-          -c --clean \
-          -d --nodeps \
-          -f --force \
-          -g --groups \
-          -h --help \
-          -i --info \
-          -l --list \
-          -p --print-uris \
-          -s --search \
-          -u --sysupgrade \
-          -w --downloadonly \
-          -y --refresh \
-          --needed \
-          --ignore \
-          --ignoregroup \
-          --config \
-          --logfile \
-          --noconfirm \
-          --noprogressbar \
-          --noscriptlet \
-          -v --verbose \
-          -r --root \
-          -b --dbpath \
-          --cachedir \
-          ' -- $cur ) )
-        return 0
-        ;;
-      Q)
-        COMPREPLY=( $( compgen -W '\
-          -c --changelog \
-          -d --deps \
-          -e --explicit \
-          -g --groups \
-          -h --help \
-          -i --info \
-          -k --check \
-          -l --list \
-          -m --foreign \
-          -o --owns \
-          -p --file \
-          -s --search \
-          -t --unrequired \
-          -u --upgrades \
-          --config \
-          --logfile \
-          --noconfirm \
-          --noprogressbar \
-          --noscriptlet \
-          -v --verbose \
-          -r --root \
-          -b --dbpath \
-          --cachedir \
-          ' -- $cur ) )
-        return 0
-        ;;
-    esac
-    rem_selected
-  else
-    case "${op}" in
-      U)
-        COMPREPLY=( $( compgen -d -- "$cur" ) \
-                    $( compgen -f -X '!*.pkg.tar.gz' -- "$cur" ) )
-        return 0
-        ;;
-      h|V)
-        COMPREPLY=''
-        return 0
-        ;;
-      Q)
-        if _instring $mod g; then
-          _installed_groups
-        elif _instring $mod o; then
-          COMPREPLY=( $( compgen -d -- "$cur" ) \
-                      $( compgen -f -- "$cur" ) )
-        elif _instring $mod p; then
-          COMPREPLY=( $( compgen -d -- "$cur" ) \
-                      $( compgen -f -X '!*.pkg.tar.gz' -- "$cur" ) )
-        elif _instring $mod u; then
-          COMPREPLY=''
-          return 0
-        else
-          _installed_pkgs
-        fi
-        return 0
-        ;;
-      R)
-        _installed_pkgs
-        return 0
-        ;;
-      S)
-        if _instring $mod l; then
-          _available_repos
-        else
-          _available_pkgs
-        fi
-        return 0
-        ;;
-    esac
-  fi
-
-  rem_selected
-}
-complete -o filenames -F _pacman pacman

contrib/bash_completion.in

@@ -0,0 +1,113 @@
+# This file is in the public domain.
+
+_arch_compgen() {
+  local i r
+  COMPREPLY=($(compgen -W '$*' -- "$cur"))
+  for ((i=1; i < ${#COMP_WORDS[@]}-1; i++)); do
+    for r in ${!COMPREPLY[@]}; do
+      if [[ ${COMP_WORDS[i]} = ${COMPREPLY[r]} ]]; then
+        unset 'COMPREPLY[r]'; break
+      fi
+    done
+  done
+}
+
+_arch_ptr2comp() {
+  local list= x y
+  for x; do
+    for y in '0 --' '1 -'; do
+      eval 'set -- ${'$x'[${y% *}]}'
+      list+=\ ${@/#/${y#* }}
+    done
+  done
+  _arch_compgen $list
+}
+
+_arch_incomp() {
+  local r="\s-(-${1#* }\s|\w*${1% *})"; [[ $COMP_LINE =~ $r ]]
+}
+
+_makepkg() {
+  local cur opts prev
+  COMPREPLY=()
+  _get_comp_words_by_ref cur prev
+  if [[ $cur = -* && ! $prev =~ ^-(-(cleancache|config|help)$|\w*[Chp]) ]]; then
+    opts=('allsource asroot clean cleancache config force geninteg help holdver
+           ignorearch install log nobuild nocolor noconfirm nodeps noextract
+           noprogressbar pkg repackage rmdeps skipinteg source syncdeps'
+          'A C L R c d e f g h i m o p r s')
+    _arch_ptr2comp opts
+  fi
+  true
+}
+
+_pacman_pkg() {
+  _arch_compgen "$(
+    if [[ $2 ]]; then
+      \pacman -$1 | \cut -d' ' -f1 | \sort -u
+    else
+      \pacman -$1
+    fi
+  )"
+}
+
+_pacman() {
+  local common core cur database prev query remove sync upgrade o
+  COMPREPLY=()
+  _get_comp_words_by_ref cur prev
+  database=('asdeps asexplicit')
+  query=('changelog check deps explicit file foreign groups info list owns
+          search unrequired upgrades' 'c e g i k l m o p s t u')
+  remove=('cascade dbonly nodeps nosave print recursive unneeded' 'c k n p s u')
+  sync=('asdeps asexplicit clean downloadonly force groups ignore ignoregroup
+         info list needed nodeps print refresh search sysupgrade'
+        'c f g i l p s u w y')
+  upgrade=('asdeps asexplicit force nodeps print' 'f p')
+  common=('arch cachedir config dbpath debug help logfile noconfirm
+           noprogressbar noscriptlet quiet root verbose' 'b d h q r v')
+  core=('database help query remove sync upgrade version' 'D Q R S U V h')
+
+  for o in 'D database' 'Q query' 'R remove' 'S sync' 'U upgrade'; do
+    _arch_incomp "$o" && break
+  done
+
+  if [[ $? != 0 ]]; then
+    _arch_ptr2comp core
+  elif [[ ! $prev =~ ^-\w*[Vbhr] &&
+    ! $prev = --@(cachedir|config|dbpath|help|logfile|root|version) ]]
+  then
+    [[ $cur = -* ]] && _arch_ptr2comp ${o#* } common ||
+      case ${o% *} in
+      D|R)
+          _pacman_pkg Qq;;
+      Q)
+        { _arch_incomp 'g groups' && _pacman_pkg Qg sort; }    ||
+        { _arch_incomp 'p file'   && _pacman_file; }           ||
+          _arch_incomp 'o owns'   || _arch_incomp 'u upgrades' ||
+          _pacman_pkg Qq;;
+      S)
+        { _arch_incomp 'g groups' && _pacman_pkg Sg; }      ||
+        { _arch_incomp 'l list'   && _pacman_pkg Sl sort; } ||
+          _pacman_pkg Slq;;
+      U)
+          _pacman_file;;
+      esac
+  fi
+  true
+}
+
+if [[ $(type -t compopt) = "builtin" ]]; then
+  _pacman_file() {
+    compopt -o filenames; _filedir 'pkg.tar.*'
+  }
+  complete -F _pacman -o default pacman
+else
+  _pacman_file() {
+    _filedir 'pkg.tar.*'
+  }
+  complete -F _pacman -o filenames -o default pacman
+fi
+
+complete -F _makepkg -o default makepkg
+
+# ex:et ts=2 sw=2 ft=sh

contrib/gensync

@@ -1,134 +0,0 @@
-#!/bin/bash
-#
-#   gensync
-#
-#   Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
-#
-#   This program is free software; you can redistribute it and/or modify
-#   it under the terms of the GNU General Public License as published by
-#   the Free Software Foundation; either version 2 of the License, or
-#   (at your option) any later version.
-#
-#   This program is distributed in the hope that it will be useful,
-#   but WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#   GNU General Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License
-#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-myver='3.1.1'
-
-# functions
-
-usage() {
-	printf "gensync (pacman) %s\n\n" "$myver"
-	printf "Usage: %s <root> <destfile> [package_directory]\n\n" "$0"
-	printf "\
-gensync will generate a sync database by reading all PKGBUILD files\n\
-from <root>. gensync builds the database in a temporary directory\n\
-and then compresses it to <destfile>.\n\n"
-	printf "\
-gensync will calculate md5sums of packages in the same directory as\n\
-<destfile>, unless an alternate [package_directory] is specified.\n\n"
-	printf "\
-note: The <destfile> name is important. It must be of the form\n\
-      {treename}.db.tar.gz where {treename} is the name of the custom\n\
-      package repository you configured in /etc/pacman.conf. The\n\
-      generated database must reside in the same directory as your\n\
-      custom packages (also configured in /etc/pacman.conf)\n\n"
-	echo "Example:  gensync /var/abs/local /home/mypkgs/custom.db.tar.gz"
-}
-
-version() {
-	printf "gensync (pacman) %s\n" "$myver"
-	printf "\
-Copyright (C) 2002-2006 Judd Vinet <jvinet@zeroflux.org>.\n\n\
-This is free software; see the source for copying conditions.\n\
-There is NO WARRANTY, to the extent permitted by law.\n"
-}
-
-error () {
-	local mesg=$1; shift
-	printf "==> ERROR: ${mesg}\n" "$@" >&2
-}
-
-die () {
-	error $*
-	exit 1
-}
-
-# PROGRAM START
-
-if [ "$1" = "-h" -o "$1" = "--help" ]; then
-	usage
-	exit 0
-fi
-
-if [ "$1" = "-V" -o "$1" = "--version" ]; then
-	version
-	exit 0
-fi
-
-if [ $# -lt 2 ]; then
-	usage
-	exit 1
-fi
-
-# source system and user makepkg.conf
-if [ -r /etc/makepkg.conf ]; then
-	source /etc/makepkg.conf
-else
-	die "/etc/makepkg.conf not found. Cannot continue."
-fi
-
-if [ -r ~/.makepkg.conf ]; then
-	source ~/.makepkg.conf
-fi
-
-
-d=$(dirname $1)
-rootdir="$(cd $d && pwd)/$(basename $1)"
-d="$(dirname $2)"
-destdir="$(cd $d && pwd)"
-destfile="$destdir/$(basename $2)"
-pkgdir=""
-if [ "$3" != "" ]; then
-	pkgdir="$3"
-fi
-
-[ ! -d "$rootdir" ] && die "invalid root dir: $rootdir"
-
-echo "gensync: building database entries, generating md5sums..." >&2
-cd "$destdir"
-
-pkgs=""
-
-for file in $(find "$rootdir"/* -name "$BUILDSCRIPT"); do
-	unset pkgname pkgver pkgrel options
-
-	source $file || die "failed to parse $file"
-	if [ "$arch" = 'any' ]; then
-		CARCH='any'
-	fi
-	if [ "$pkgdir" != "" ]; then
-		pkgfile="$pkgdir/$pkgname-$pkgver-$pkgrel-${CARCH}${PKGEXT}"
-	else
-		pkgfile="$destdir/$pkgname-$pkgver-$pkgrel-${CARCH}${PKGEXT}"
-	fi
-
-	if [ ! -f "$pkgfile" ]; then
-		error "could not find %s-%s-%s-%s%s - skipping" $pkgname $pkgver $pkgrel $CARCH $PKGEXT
-	else
-		pkgs="$pkgs $pkgfile"
-	fi
-done
-
-echo "creating repo DB..."
-
-# we'll trim the output just a tad, as gensync may be used on large repos
-repo-add $destfile $pkgs \
-		| grep -e "package" -e "database"
-
-# vim: set ts=2 sw=2 noet:

contrib/pacdiff.in

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!@BASH_SHELL@
 #   pacdiff : a simple pacnew/pacorig/pacsave updater
 #
 #   Copyright (c) 2007 Aaron Griffin <aaronmgriffin@gmail.com>
@@ -18,19 +18,23 @@
 #
 
 diffprog=${DIFFPROG:-vimdiff}
+diffsearchpath=${DIFFSEARCHPATH:-/etc}
 locate=0
 
 usage() {
 	echo "pacdiff : a simple pacnew/pacorig/pacsave updater"
 	echo "Usage : pacdiff [-l]"
-	echo "The -l/--locate flag makes pacdiff use locate rather than find"
+	echo "  -l/--locate makes pacdiff use locate rather than find"
+	echo "  DIFFPROG variable allows to override the default vimdiff"
+	echo "  DIFFSEARCHPATH allows to override the default /etc path"
+	echo "Example : DIFFPROG=meld DIFFSEARCHPATH=\"/boot /etc /usr\" pacdiff"
 }
 
 cmd() {
 	if [ $locate -eq 1 ]; then
 		locate -0 -e -b \*.pacnew \*.pacorig \*.pacsave
 	else
-		find /etc/ \( -name \*.pacnew -o -name \*.pacorig -o -name \*.pacsave \) -print0
+		find $diffsearchpath \( -name \*.pacnew -o -name \*.pacorig -o -name \*.pacsave \) -print0
 	fi
 }
 

contrib/pacscripts.in

@@ -1,4 +1,4 @@
-#!/bin/bash
+#!@BASH_SHELL@
 #
 #   pacscripts : tries to print out the {pre,post}_{install,remove,upgrade}
 #   scripts of a given package
@@ -27,7 +27,7 @@ set -o errexit
 progname=$(basename $0)
 progver="0.4"
 
-conf="/etc/pacman.conf"
+conf="@sysconfdir@/pacman.conf"
 
 if [ ! -r "$conf" ]; then
 	echo "ERROR: unable to read $conf"
@@ -36,8 +36,8 @@ fi
 
 eval $(awk '/DBPath/ {print $1$2$3}' "$conf")
 eval $(awk '/CacheDir/ {print $1$2$3}' "$conf")
-pac_db="${DBPath:-/var/lib/pacman}/local"
-pac_cache="${CacheDir:-/var/cache/pacman/pkg}"
+pac_db="${DBPath:-@localstatedir@/lib/pacman}/local"
+pac_cache="${CacheDir:-@localstatedir@/cache/pacman/pkg}"
 
 error() {
 	local mesg=$1; shift

contrib/pacsearch.in

@@ -1,10 +1,10 @@
 #!/usr/bin/perl
 # pacsearch - Adds color and install information to a 'pacman -Ss' search
 #
-# Copyright (C) 2008 Dan McGee <dpmcgee@gmail.com>
+# Copyright (C) 2008-2011 Dan McGee <dan@archlinux.org>
 #
 # Based off original shell script version:
-# Copyright (C) 2006-2007 Dan McGee <dpmcgee@gmail.com>
+# Copyright (C) 2006-2007 Dan McGee <dan@archlinux.org>
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License
@@ -39,7 +39,7 @@ if ($#ARGV lt 0 || $ARGV[0] eq "--help" || $ARGV[0] eq "-h") {
 
 if ($ARGV[0] eq "--version" || $ARGV[0] eq "-v") {
 	print "$progname version $version\n";
-	print "Copyright (C) 2006-2008 Dan McGee\n";
+	print "Copyright (C) 2006-2011 Dan McGee\n";
 	exit 0;
 }
 
@@ -53,17 +53,19 @@ my $CLR6 = "\e[0;33m";
 my $CLR7 = "\e[1;36m";
 my $INST = "\e[1;31m";
 my $BASE = "\e[0m";
-my $INSTMARK = $INST."***";
 
-# color a "repo/pkgname pkgver" line based on the respository name
+# color a "repo/pkgname pkgver" line based on the repository name
 sub to_color {
 	my $line = shift;
+	# get the installed text colored first
+	$line =~ s/(\[.*\]$)/$INST$1$BASE/;
+	# and now the repo and dealings
 	$line =~ s/(^core\/.*)/$CLR1$1$BASE/;
 	$line =~ s/(^extra\/.*)/$CLR2$1$BASE/;
 	$line =~ s/(^community\/.*)/$CLR3$1$BASE/;
 	$line =~ s/(^testing\/.*)/$CLR4$1$BASE/;
-	$line =~ s/(^unstable\/.*)/$CLR5$1$BASE/;
-	$line =~ s/(^custom\/.*)/$CLR6$1$BASE/;
+	$line =~ s/(^community-testing\/.*)/$CLR5$1$BASE/;
+	$line =~ s/(^multilib\/.*)/$CLR6$1$BASE/;
 	$line =~ s/(^local\/.*)/$CLR7$1$BASE/;
 	# any other unknown repository
 	$line =~ s/(^[\w-]*\/.*)/$CLR6$1$BASE/;
@@ -83,10 +85,15 @@ if ($#syncpkgs >= 0) {
 # counter var for packages, used here and in the query loop too
 my $cnt = 0;
 foreach $_ (@syncpkgs) {
-	# we grab 3 fields here: repo, name/ver, and desc
-	my @pkgfields = /^(.*?)\/(.*?)\n(.*)$/s;
-	# add a fourth field that will indicate install status
-	push (@pkgfields, "");
+	# we grab 4 fields here: repo, name/ver, installed, and desc
+	my @pkgfields = /^(.*?)\/(.*?) ?(\[.*\])?\n(.*)$/s;
+	if(not @pkgfields) {
+		# skip any non-matching line and just print it for the user
+		print $_, "\n";
+		next;
+	}
+	# since installed is optional, we should fill it in if necessary
+	$pkgfields[2] = "" if not defined $pkgfields[2];
 	# add a fifth field that indicates original order
 	push (@pkgfields, $cnt++);
 	# add each sync pkg by name/ver to a hash table for quick lookup
@@ -102,16 +109,13 @@ if ($#querypkgs >= 0) {
 }
 
 foreach $_ (@querypkgs) {
-	# we grab 3 fields here: repo, name/ver, and desc
-	my @pkgfields = /^(.*?)\/(.*?)\n(.*)$/s;
+	# we grab 4 fields here: repo, name/ver, installed, and desc
+	my @pkgfields = /^(.*?)\/(.*?) ?(\[.*\])?\n(.*)$/s;
+	# since installed is optional, we should fill it in if necessary
+	$pkgfields[2] = "" if not defined $pkgfields[2];
 	# check if the package was listed in the sync out
-	# if it is we want to mark it with a *** marker
-	if (exists $allpkgs{$pkgfields[1]}) {
-		# mark it in our fourth field as installed
-		@{ $allpkgs{$pkgfields[1]} }[3] = $INSTMARK;
-	} else {
-		# add a fourth field that will indicate install status
-		push (@pkgfields, $INSTMARK);
+	if (not exists $allpkgs{$pkgfields[1]}) {
+		$pkgfields[2] = "[installed]";
 		# add a fifth field that indicates original order (after sync)
 		push (@pkgfields, $cnt++);
 		# add our local-only package to the hash
@@ -122,11 +126,11 @@ foreach $_ (@querypkgs) {
 # sort by original order (the fifth field) and print
 foreach $_ ( sort{ @{$allpkgs{$a}}[4] <=> @{$allpkgs{$b}}[4] } keys %allpkgs) {
 	my @v = @{$allpkgs{$_}};
-	my $line = "$v[0]/$v[1]";
+	my $line = "$v[0]/$v[1] $v[2]";
 	$line = to_color($line);
-	# print install marker + colorized "repo/pkgname pkgver" string
-	print "$v[3]$line\n";
-	print "$v[2]\n";
+	# print colorized "repo/pkgname pkgver" string with possible installed text
+	print "$line\n";
+	print "$v[3]\n";
 }
 
 #vim: set noet:

contrib/pactree

@@ -1,300 +0,0 @@
-#!/bin/bash
-# pactree : a simple dependency tree viewer
-#
-# Copyright (C) 2008 Carlo "carlocci" Bersani <carlocci@gmail.com>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version 2
-# of the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# Original http://carlocci.ngi.it/arch/pactree
-# Credit to scj for the graphviz idea
-
-# set the colors
-branch1_color="\033[0;33m"    #Brown
-branch2_color="\033[0;37m"    #Gray
-leaf_color="\033[1;32m"       #Light green
-leaf2_color="\033[0;32m"      #Green
-
-# set the separators
-separator="   "
-branch_tip1="|--"
-branch_tip2="+--"
-provides="provides "
-
-# set the graphviz options
-# http://www.graphviz.org/doc/info/output.html for available output formats
-# http://www.graphviz.org/doc/info/colors.html for available colors
-gformat="png"                 #output format
-start_color="red"             #START color
-nodes_color="green"           #color of the nodes
-arrow1_color="chocolate4"     #color of the normal arrow
-arrow2_color="grey"           #color of the "provided by" headless arrow
-
-readonly prog_name="pactree"
-readonly prog_ver="0.2"
-
-_usage(){
-	echo "This program generates the dependency tree of an installed package"
-	echo "Usage:   $prog_name [OPTIONS] <installed packages>"
-	echo
-	echo " OPTIONS:"
-	echo "  -c, --color                Enable color output"
-	echo "  -d, --depth INT            Limit the shown dependencies depth"
-	echo "  -g, --graph                Use graphviz to make an image of the tree"
-	echo "  -l, --linear               Enable linear output"
-	echo "  -s, --silent               Shh, let me hear those errors!"
-	echo "  -u, --unique               Print the dependency list with no duplicates"
-	echo
-	echo "  -h, --help                 Print this help message"
-	echo "  -v, --version              Print the program name and version"
-	echo
-	echo "Example: $prog_name -c -d 2 readline"
-}
-
-_version(){
-	echo "$prog_name version $prog_ver"
-	echo "Copyright (C) 2008 Carlo \"carlocci\" Bersani <carlocci@gmail.com>"
-}
-# end of the friendliness
-
-
-# grab a field from the database: $1=path/to/file, $2=field to grab
-_grabfield(){
-	for line in $(cat "$1" 2>/dev/null ); do
-		if [ -z "$line" ]; then
-			continue;
-		fi;
-		if [[ "$line" =~ %[A-Z]*% ]]; then
-			current="$line"
-			continue;
-		fi;
-		if [ "$current" = "$2" ]; then
-			echo "$line"
-		fi;
-	done
-}
-
-
-# find a dep in the db: $1=dep, $2=field, $3=dbfile, ret=file list
-_finddep(){
-	for line in $(awk 'BEGIN{RS=""}
-	                   {
-	                   if ($1=="'"$2"'"){
-	                     for (i=2 ; i<=NF ; ++i){
-	                       if ($i ~ /^'"$1"'([<>=]+.*|)$/ ){
-	                         print FILENAME}
-	                       }
-	                     }
-	                   }' $(find $pac_db -name $3)); do
-		echo "${line%/*}"
-	done
-}
-
-
-# Recursive function: does all of the work, pays all of the taxes     #
-_tree(){
-	pkg_name="$1"
-	pkg_dirs="$(echo $pac_db/$pkg_name-[0-9]*)"
-
-	# Is $pkg_name real or provided?
-	[ ! -d "$pkg_dirs" ] && pkg_dirs="$(_finddep $pkg_name %PROVIDES% depends)"
-
-	for pkg_dir in $pkg_dirs ; do
-		spaces="$2"
-		unset provided
-		branch_tip="$branch_tip1"
-		branch_color="$branch1_color"
-		pkg_name="$(_grabfield "$pkg_dir/desc" %NAME%)"
-		if [ ! "$pkg_name" = "$1" ]; then
-			provided="$leaf2_color $provides$leaf_color$1"
-			branch_tip="$branch_tip2"
-			branch_color="$branch2_color"
-			if [ $graphviz -eq 1 ] && [[ ! "${dep_list[@]}" =~ _$1_ ]] && [ $spaces -ne $((max_depth+1)) ]; then
-				echo "\"$1\" -> \"$pkg_name\" [arrowhead=none, color=$arrow2_color];"
-				dep_list=( "${dep_list[@]}" "_$1_" )
-				_tree "$pkg_name" $((spaces+1))
-				continue
-			fi
-		fi
-
-		# Generate the spacer
-		spacer=""
-		for each in $(seq 1 $spaces); do
-			spacer="$spacer$separator"
-		done
-		spacer="$spacer$branch_tip"
-
-		[ $silent -ne 1 ] &&	echo -e "$branch_color$spacer$leaf_color$pkg_name$provided"
-
-		[ ! -d "$pkg_dir" ] && echo "No $pkg_name in the database (inconsistent database?)" >&2
-
-		if [[ ! " ${dep_list[@]} " =~ " $pkg_name " ]] && [ $spaces -ne $max_depth ]; then
-			dep_list=( "${dep_list[@]}" "$pkg_name" )
-			for dep_pkg in $(_grabfield "$pkg_dir/depends" %DEPENDS%); do
-				spaces=$2		#Bash scoping ;_;
-				if [ $graphviz -eq 1 ]; then
-					echo "\"$1\" -> \"${dep_pkg%%[<>=]*}\" [color=$arrow1_color];"
-				fi
-				_tree "${dep_pkg%%[<>=]*}" $((spaces+1))
-			done
-		fi
-	done
-}
-
-
-# Main program: gets all of the money, pays none of the taxes
-
-# Command line parameters parser
-if [ $# -eq 0 ]; then
-	_usage
-	exit 1
-fi
-
-options=( "$@" )
-len_options=${#options[@]}
-for (( n=0 ; n < $len_options ; n++ )); do
-	if [ "${options[$n]}" = "--" ]; then
-		unset options[$n]
-		break
-	fi
-	if [ "${options[$n]}" = "-h" -o "${options[$n]}" = "--help" ]; then
-		_usage
-		exit 0
-	fi
-
-	if [ "${options[$n]}" = "-v" -o "${options[$n]}" = "--version" ]; then
-		_version
-		exit 0
-	fi
-
-	if [ "${options[$n]}" = "-l" -o "${options[$n]}" = "--linear" ]; then
-		unset options[$n]
-		linear=1
-		continue
-	fi
-
-	if [ "${options[$n]}" = "-s" -o "${options[$n]}" = "--silent" ]; then
-		unset options[$n]
-		silent=1
-		continue
-	fi
-
-	if [ "${options[$n]}" = "-u" -o "${options[$n]}" = "--unique" ]; then
-		unset options[$n]
-		silent=1
-		nodup=1
-		continue
-	fi
-
-	if [ "${options[$n]}" = "-g" -o "${options[$n]}" = "--graph" ]; then
-		unset options[$n]
-		graphviz=1
-		continue
-	fi
-
-	if [ "${options[$n]}" = "-c" -o "${options[$n]}" = "--color" ]; then
-		unset options[$n]
-		colored=1
-		continue
-	fi
-
-	if [[ "${options[$n]}" =~ -d[[:digit:]]+ || "${options[$n]}" == "--depth" ]]; then
-		if [[ "${options[$n]#-d}" =~ [[:digit:]]+ ]]; then
-			max_depth="${options[$n]#-d}"
-		elif [[ ${options[$((n+1))]} =~ [[:digit:]]+ ]]; then
-			max_depth="${options[$((n+1))]}"
-			unset options[$((n+1))]
-			((++n))
-		fi
-		unset options[$n]
-		continue
-	fi
-done
-# End of the dumb command line parser
-
-# Env
-colored=${colored:-0}
-max_depth=${max_depth:--10}
-linear=${linear:-0}
-silent=${silent:-0}
-nodup=${nodup:-0}
-graphviz=${graphviz:-0}
-
-if [ $colored -ne 1 ]; then
-	unset branch1_color
-	unset leaf_color
-	unset leaf2_color
-	unset branch2_color
-fi
-
-if [ $linear -eq 1 ]; then
-	unset separator
-	unset branch_tip1
-	unset branch_tip2
-	unset provides
-fi
-
-if [ $graphviz -eq 1 ]; then
-	silent=1
-	nodup=0
-	if [ ! -f /usr/bin/dot ]; then
-		echo "ERROR: package graphviz is not installed"
-		echo "       Run pacman -S graphviz to install it"
-		exit 1
-	fi
-fi
-
-if [ ! -r /etc/pacman.conf ]; then
-	echo "ERROR: unable to read /etc/pacman.conf"
-	exit 1
-else
-	eval $(awk '/DBPath/ {print $1$2$3}' /etc/pacman.conf)
-fi
-
-pac_db="${DBPath:-/var/lib/pacman}/local"
-
-if [ ! -d "$pac_db" ] ; then
-	echo "ERROR: pacman database directory ${pac_db} not found"
-	exit 1
-fi
-# Env End
-
-
-# Program starts
-_main(){
-	for pkg_name in ${options[@]} ; do
-		[ $graphviz -eq 1 ] && echo -e "\"START\" -> \"$pkg_name\" ;"
-		_tree "$pkg_name" 0
-		if [ $nodup -eq 1 ]; then
-			for pkg_tree in ${dep_list[@]} ; do
-				echo "$pkg_tree"
-			done
-		fi
-	done
-	if [ $silent -eq 0 ]; then
-		echo -ne '\033[0m' # return colors to normal?
-		echo -ne '\033[?25h' #return cursor to normal?
-	fi
-}
-
-
-if [ $graphviz -eq 1 ]; then
-	root_pkgs="${options[@]}"
-	# Uncomment for the "generated by pactree" node in graphviz
-	#advert="xyz [height=0.07, fontsize=8.0, label=\"GENERATED WITH PACTREE\",shape=box,color="black",style=filled,fontcolor="white"];\n"
-
-	echo -e "digraph G { START [color=$start_color, style=filled];\n node [style=filled, color=$nodes_color];\n$(_main)\n$advert}" | dot -T$gformat -o "${root_pkgs// /_}.deps.$gformat"
-else _main
-fi
-
-# vim: set ts=2 sw=2 noet:

contrib/updatesync

@@ -1,137 +0,0 @@
-#!/bin/bash
-#
-#   updatesync
-#
-#   Copyright (c) 2004 by Jason Chu <jason@archlinux.org>
-#   Derived from gensync (c) 2002-2006 Judd Vinet <jvinet@zeroflux.org>
-#
-#   This program is free software; you can redistribute it and/or modify
-#   it under the terms of the GNU General Public License as published by
-#   the Free Software Foundation; either version 2 of the License, or
-#   (at your option) any later version.
-#
-#   This program is distributed in the hope that it will be useful,
-#   but WITHOUT ANY WARRANTY; without even the implied warranty of
-#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#   GNU General Public License for more details.
-#
-#   You should have received a copy of the GNU General Public License
-#   along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-
-myver='3.1.1'
-
-# functions
-
-usage() {
-	printf "updatesync (pacman) %s\n\n" "$myver"
-	printf "Usage: %s <action> <destfile> <option> [package_directory]\n\n" "$0"
-	printf "\
-updatesync will update a sync database by reading a PKGBUILD and\n\
-modifying the destfile. updatesync updates the database in a temporary\n\
-directory and then compresses it to <destfile>.\n\n"
-	printf "There are two types of actions:\n\n"
-	printf "upd - Will update a package's entry or create it if it doesn't exist.\n      It takes the package's PKGBUILD as an option.\n"
-	printf "del - Will remove a package's entry from the db. It takes the package's\n      name as an option.\n"
-	echo
-	printf "\
-updatesync will calculate md5sums of packages in the same directory as\n\
-<destfile>, unless an alternate [package_directory] is specified.\n\n"
-	echo "Example:  updatesync upd /home/mypkgs/custom.db.tar.gz PKGBUILD"
-}
-
-version() {
-	printf "updatesync (pacman) %s\n" "$myver"
-	printf "\
-Copyright (C) 2004 Jason Chu <jason@archlinux.org>.\n\n\
-This is free software; see the source for copying conditions.\n\
-There is NO WARRANTY, to the extent permitted by law.\n"
-}
-
-error () {
-	local mesg=$1; shift
-	printf "==> ERROR: ${mesg}\n" "$@" >&2
-}
-
-die () {
-	error $*
-	exit 1
-}
-
-# PROGRAM START
-
-if [ "$1" = "-h" -o "$1" = "--help" ]; then
-	usage
-	exit 0
-fi
-
-if [ "$1" = "-V" -o "$1" = "--version" ]; then
-	version
-	exit 0
-fi
-
-if [ $# -lt 3 ]; then
-	usage
-	exit 1
-fi
-
-# source system and user makepkg.conf
-if [ -r /etc/makepkg.conf ]; then
-	source /etc/makepkg.conf
-else
-	die "/etc/makepkg.conf not found. Cannot continue."
-fi
-
-if [ -r ~/.makepkg.conf ]; then
-	source ~/.makepkg.conf
-fi
-
-if [ "$1" != "upd" -a "$1" != "del" ]; then
-	usage
-	exit 1
-fi
-
-action=$1
-pkgdb=$2
-option=$3
-pkgdir="$(pwd)"
-if [ "$4" != "" ]; then
-	pkgdir="$4"
-fi
-
-if [ "$action" = "upd" ]; then # INSERT / UPDATE
-	if [ ! -f "$option" ]; then
-		die "$option not found"
-	fi
-
-	unset pkgname pkgver pkgrel options
-
-	source $option || die "failed to parse $option"
-	if [ "$arch" = 'any' ]; then
-		CARCH='any'
-	fi
-	pkgfile="$pkgdir/$pkgname-$pkgver-$pkgrel-${CARCH}${PKGEXT}"
-
-	if [ ! -f "$pkgfile" ]; then
-		die "could not find %s-%s-%s-%s%s - aborting" $pkgname $pkgver $pkgrel $CARCH $PKGEXT
-	fi
-
-	repo-add "$pkgdb" "$pkgfile"
-else # DELETE
-	fname="$(basename $option)"
-	if [ "$fname" = "PKGBUILD" ]; then
-		if [ ! -f "$option" ]; then
-			die "%s not found" $option
-		fi
-
-		unset pkgname pkgver pkgrel options
-		source $option
-	else
-		pkgname=$option
-	fi
-
-	repo-remove "$pkgdb" "$pkgname"
-fi
-
-exit 0
-# vim: set ts=2 sw=2 noet:

contrib/wget-xdelta.sh.in

@@ -1,7 +1,7 @@
-#!/bin/bash
+#!@BASH_SHELL@
 
-if [ -r "/etc/makepkg.conf" ]; then
-	source /etc/makepkg.conf
+if [ -r "@sysconfdir@/makepkg.conf" ]; then
+	source @sysconfdir@/makepkg.conf
 else
 	echo "wget-xdelta: Unable to find makepkg.conf"
 	exit 1
@@ -30,11 +30,11 @@ new_version=$(echo $pkg_data | cut -d ' ' -f 2)
 base_url=${file_url%/*}
 
 # Look for the last version
-for file in $(ls -r /var/cache/pacman/pkg/${pkgname}-*-*{,-$CARCH}$PKGEXT 2>/dev/null); do
+for file in $(ls -r @localstatedir@/cache/pacman/pkg/${pkgname}-*-*{,-$CARCH}$PKGEXT 2>/dev/null); do
 	[[ "$file" =~ "$CARCH" ]] && arch="-$CARCH" || arch=""
 	check_version=$(echo $file | \
 		sed "s|^.*/${pkgname}-\([[:alnum:]_\.]*-[[:alnum:]_\.]*\)${arch}$PKGEXT$|\1|" | \
-		grep -v "^/var/cache/pacman/pkg")
+		grep -v "^@localstatedir@/cache/pacman/pkg")
 
 	[ "$check_version" = "" ] && continue
 

contrib/zsh_completion.in

@@ -26,13 +26,14 @@ _pacman_opts_common=(
 	'--noconfirm[Do not ask for confirmation]'
 	'--noprogressbar[Do not show a progress bar when downloading files]'
 	'--noscriptlet[Do not execute the install scriptlet if one exists]'
+	'--print[Only print the targets instead of performing the operation]'
 )
 
 # options for passing to _arguments: options for --upgrade commands
 _pacman_opts_pkgfile=(
 	'-d[Skip dependency checks]'
 	'-f[Overwrite conflicting files]'
-	'*:package file:_files -g "*.pkg.tar.gz(.)"'
+	'*:package file:_files -g "*.pkg.tar.*(.)"'
 )
 
 # options for passing to _arguments: subactions for --query command
@@ -120,7 +121,7 @@ _pacman_action_query() {
 			_arguments -s : \
 				"$_pacman_opts_common[@]" \
 				"$_pacman_opts_query_modifiers[@]" \
-				'*:package file:_files -g "*.pkg.tar.gz"'
+				'*:package file:_files -g "*.pkg.tar.*"'
 				;;
 		query_group)
 			_arguments -s : \
@@ -221,20 +222,20 @@ _pacman_completions_all_groups() {
 _pacman_completions_all_packages() {
 	local -a cmd packages repositories packages_long
 
-	repositories=(${(o)${${${(M)${(f)"$(</etc/pacman.conf)"}:#\[*}/\[/}/\]/}:#options})
+	repositories=(${(o)${${${(M)${(f)"$(<@sysconfdir@/pacman.conf)"}:#\[*}/\[/}/\]/}:#options})
 	typeset -U repositories
-	packages_long=(/var/lib/pacman/sync/${^repositories}/*(/))
-	packages=(${(o)${${packages_long/\/var\/lib\/pacman\/sync\//}#*/}%-*-*} )
+	packages_long=(@localstatedir@/lib/pacman/sync/${^repositories}/*(/))
+	packages=(${(o)${${packages_long#@localstatedir@/lib/pacman/sync/}#*/}%-*-*} )
 	typeset -U packages
 	_wanted packages expl "packages" compadd - "${(@)packages}"
 	if [[ $PREFIX != */* ]] ; then
-		repositories=(${(o)${${${(M)${(f)"$(</etc/pacman.conf)"}:#\[*}/\[/}/\]/}:#options})
+		repositories=(${(o)${${${(M)${(f)"$(<@sysconfdir@/pacman.conf)"}:#\[*}/\[/}/\]/}:#options})
 		typeset -U repositories
 		_wanted repo_packages expl "repository/package" compadd -S "/" $repositories
 	else
 		compset -P '*/'
-		packages_long=(/var/lib/pacman/sync/$IPREFIX*(/))
-		packages=(${(o)${${packages_long/\/var\/lib\/pacman\/sync\//}#*/}%-*-*} )
+		packages_long=(@localstatedir@/lib/pacman/sync/$IPREFIX*(/))
+		packages=(${(o)${${packages_long#@localstatedir@/lib/pacman/sync/}#*/}%-*-*} )
 		typeset -U packages
 		_wanted repo_packages expl "repository/package" compadd ${(@)packages}
 	fi
@@ -252,15 +253,15 @@ _pacman_completions_installed_groups() {
 # provides completions for installed packages
 _pacman_completions_installed_packages() {
 	local -a cmd packages packages_long
-	packages_long=(/var/lib/pacman/local/*(/))
-	packages=( ${${packages_long/\/var\/lib\/pacman\/local\//}%-*-*} )
+	packages_long=(@localstatedir@/lib/pacman/local/*(/))
+	packages=( ${${packages_long#@localstatedir@/lib/pacman/local/}%-*-*} )
 	compadd "$@" -a packages
 }
 
 # provides completions for repository names
 _pacman_completions_repositories() {
 	local -a cmd repositories
-	repositories=(${(o)${${${(M)${(f)"$(</etc/pacman.conf)"}:#\[*}/\[/}/\]/}:#options})
+	repositories=(${(o)${${${(M)${(f)"$(<@sysconfdir@/pacman.conf)"}:#\[*}/\[/}/\]/}:#options})
 	# Uniq the array
 	typeset -U repositories
 	compadd "$@" -a repositories
@@ -295,11 +296,11 @@ _pacman() {
 				"$_pacman_opts_query_modifiers[@]" \
 				'*:package file:_files'
 				;;
-		-Q*p*) # file *.pkg.tar.gz
+		-Q*p*) # file *.pkg.tar.*
 			_arguments -s : \
 				"$_pacman_opts_common[@]" \
 				"$_pacman_opts_query_modifiers[@]" \
-				'*:package file:_files -g "*.pkg.tar.gz"'
+				'*:package file:_files -g "*.pkg.tar.*"'
 				;;
 		-Q*)  _pacman_action_query    ;;
 		-R*)  _pacman_action_remove   ;;

depcomp

@@ -1,10 +1,10 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2006-10-15.18
+scriptversion=2009-04-28.21; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
-# Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
+# Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -17,9 +17,7 @@ scriptversion=2006-10-15.18
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -87,6 +85,15 @@ if test "$depmode" = dashXmstdout; then
    depmode=dashmstdout
 fi
 
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+   # This is just like msvisualcpp but w/o cygpath translation.
+   # Just convert the backslash-escaped backslashes to single forward
+   # slashes to satisfy depend.m4
+   cygpath_u="sed s,\\\\\\\\,/,g"
+   depmode=msvisualcpp
+fi
+
 case "$depmode" in
 gcc3)
 ## gcc 3 implements dependency tracking that does exactly what
@@ -192,14 +199,14 @@ sgi)
 ' < "$tmpdepfile" \
     | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
     tr '
-' ' ' >> $depfile
-    echo >> $depfile
+' ' ' >> "$depfile"
+    echo >> "$depfile"
 
     # The second pass generates a dummy entry for each header file.
     tr ' ' '
 ' < "$tmpdepfile" \
    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
+   >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -215,34 +222,39 @@ aix)
   # current directory.  Also, the AIX compiler puts `$object:' at the
   # start of each line; $object doesn't have directory information.
   # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
   if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
     "$@" -Wc,-M
   else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
     "$@" -M
   fi
   stat=$?
 
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
   if test $stat -eq 0; then :
   else
-    rm -f "$tmpdepfile"
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
     exit $stat
   fi
 
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
   if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
     # Each line is of the form `foo.o: dependent.h'.
     # Do two passes, one to just change these to
     # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+    # That's a tab and a space in the [].
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -323,7 +335,12 @@ hp2)
   if test -f "$tmpdepfile"; then
     sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
     # Add `dependent.h:' lines.
-    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+    sed -ne '2,${
+	       s/^ *//
+	       s/ \\*$//
+	       s/$/:/
+	       p
+	     }' "$tmpdepfile" >> "$depfile"
   else
     echo "#dummy" > "$depfile"
   fi
@@ -399,7 +416,7 @@ dashmstdout)
 
   # Remove the call to Libtool.
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
@@ -450,32 +467,39 @@ makedepend)
   "$@" || exit $?
   # Remove any Libtool call
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
   fi
   # X makedepend
   shift
-  cleared=no
-  for arg in "$@"; do
+  cleared=no eat=no
+  for arg
+  do
     case $cleared in
     no)
       set ""; shift
       cleared=yes ;;
     esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
     case "$arg" in
     -D*|-I*)
       set fnord "$@" "$arg"; shift ;;
     # Strip any option that makedepend may not understand.  Remove
     # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
     -*|$object)
       ;;
     *)
       set fnord "$@" "$arg"; shift ;;
     esac
   done
-  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
   touch "$tmpdepfile"
   ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
   rm -f "$depfile"
@@ -495,7 +519,7 @@ cpp)
 
   # Remove the call to Libtool.
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
@@ -533,13 +557,27 @@ cpp)
 
 msvisualcpp)
   # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
+  # always write the preprocessed file to stdout.
   "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
   IFS=" "
   for arg
   do
     case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
     "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
 	set fnord "$@"
 	shift
@@ -552,16 +590,23 @@ msvisualcpp)
 	;;
     esac
   done
-  "$@" -E |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
   echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
 none)
   exec "$@"
   ;;
@@ -580,5 +625,6 @@ exit 0
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:

doc/.gitignore

@@ -6,7 +6,9 @@ pacman.8
 pacman.conf.5
 repo-add.8
 repo-remove.8
+vercmp.8
 *.css
 *.html
 *.xml
 man3
+website.tar.gz

doc/Makefile.am

@@ -7,6 +7,7 @@ ASCIIDOC_MANS = \
 	pacman.8 \
 	makepkg.8 \
 	repo-add.8 \
+	vercmp.8 \
 	PKGBUILD.5 \
 	makepkg.conf.5 \
 	pacman.conf.5 \
@@ -18,6 +19,7 @@ HTML_MANPAGES = \
 	pacman.8.html \
 	makepkg.8.html \
 	repo-add.8.html \
+	vercmp.8.html \
 	PKGBUILD.5.html \
 	makepkg.conf.5.html \
 	pacman.conf.5.html \
@@ -26,7 +28,8 @@ HTML_MANPAGES = \
 HTML_OTHER = \
 	index.html \
 	submitting-patches.html \
-	translation-help.html
+	translation-help.html \
+	HACKING.html
 
 HTML_DOCS = \
 	$(HTML_MANPAGES) \
@@ -37,6 +40,7 @@ EXTRA_DIST = \
 	pacman.8.txt \
 	makepkg.8.txt \
 	repo-add.8.txt \
+	vercmp.8.txt \
 	PKGBUILD.5.txt \
 	PKGBUILD-example.txt \
 	makepkg.conf.5.txt \
@@ -51,7 +55,7 @@ EXTRA_DIST = \
 	$(DOXYGEN_MANS)
 
 # Files that should be removed, but which Automake does not know.
-MOSTLYCLEANFILES = *.xml $(ASCIIDOC_MANS) $(HTML_DOCS) repo-remove.8
+MOSTLYCLEANFILES = *.xml $(ASCIIDOC_MANS) $(HTML_DOCS) repo-remove.8 website.tar.gz
 
 # Ensure manpages are fresh when building a dist tarball
 dist-hook:
@@ -59,7 +63,7 @@ dist-hook:
 	$(MAKE) $(AM_MAKEFLAGS) all
 
 if USE_GIT_VERSION
-GIT_VERSION := $(shell sh -c 'git describe --abbrev=4 | sed s/^v//')-dirty
+GIT_VERSION := $(shell sh -c 'git describe --abbrev=4 --dirty | sed s/^v//')
 REAL_PACKAGE_VERSION = $(GIT_VERSION)
 else
 REAL_PACKAGE_VERSION = $(PACKAGE_VERSION)
@@ -79,29 +83,47 @@ endif
 
 html: $(HTML_DOCS)
 
+website: html
+	bsdtar czf website.tar.gz $(HTML_DOCS) \
+		-C /etc/asciidoc/stylesheets/ \
+		xhtml11.css xhtml11-manpage.css xhtml11-quirks.css \
+		-C /etc/asciidoc/javascripts/ \
+		asciidoc-xhtml11.js \
+		-C /etc/asciidoc/ \
+		images
+
+pkgdatadir = ${datadir}/${PACKAGE}
+
 ASCIIDOC_OPTS = \
 	-f asciidoc.conf \
 	-a pacman_version="$(REAL_PACKAGE_VERSION)" \
 	-a pacman_date="`date +%Y-%m-%d`" \
+	-a pkgdatadir=$(pkgdatadir) \
+	-a localstatedir=$(localstatedir) \
 	-a sysconfdir=$(sysconfdir)
+
 A2X_OPTS = \
 	--no-xmllint \
 	-d manpage \
 	-f manpage \
-	--xsltproc-opts='-param man.endnotes.list.enabled 0' \
-	--xsltproc-opts='-param man.endnotes.are.numbered 0'
+	--xsltproc-opts='-param man.endnotes.list.enabled 0 -param man.endnotes.are.numbered 0'
 
 # These rules are due to the includes and files of the asciidoc text
 $(ASCIIDOC_MANS): asciidoc.conf footer.txt
 	a2x $(A2X_OPTS) --asciidoc-opts="$(ASCIIDOC_OPTS)" $@.txt
 
 %.html: %.txt
-	asciidoc $(ASCIIDOC_OPTS) -a linkcss $*.txt
+	asciidoc $(ASCIIDOC_OPTS) $*.txt
+	dos2unix $@
+
+HACKING.html: ../HACKING
+	asciidoc $(ASCIIDOC_OPTS) -o $@ ../HACKING
 	dos2unix $@
 
 # Customizations for certain HTML docs
 $(HTML_MANPAGES): asciidoc.conf footer.txt
 $(HTML_OTHER): asciidoc.conf
+%.html: ASCIIDOC_OPTS += -a linkcss -a toc -a icons
 %.8.html: ASCIIDOC_OPTS += -d manpage
 %.5.html: ASCIIDOC_OPTS += -d manpage
 %.3.html: ASCIIDOC_OPTS += -d manpage
@@ -110,6 +132,7 @@ $(HTML_OTHER): asciidoc.conf
 pacman.8 pacman.8.html: pacman.8.txt
 makepkg.8 makepkg.8.html: makepkg.8.txt
 repo-add.8 repo-add.8.html: repo-add.8.txt
+vercmp.8 vercmp.8.html: vercmp.8.txt
 PKGBUILD.5 PKGBUILD.5.html: PKGBUILD.5.txt PKGBUILD-example.txt
 makepkg.conf.5 makepkg.conf.5.html: makepkg.conf.5.txt
 pacman.conf.5 pacman.conf.5.html: pacman.conf.5.txt

doc/PKGBUILD-example.txt

@@ -15,6 +15,6 @@ md5sums=('ee5ae84d115f051d87fcaaef3b4ae782')
 build() {
   cd $srcdir/$pkgname-$pkgver
   ./configure --prefix=/usr
-  make || return 1
+  make
   make prefix=$pkgdir/usr install
 }

doc/PKGBUILD.5.txt

@@ -20,12 +20,10 @@ This manual page is meant to describe general rules about PKGBUILDs. Once a
 PKGBUILD is written, the actual package is built using makepkg and installed
 with pacman.
 
-NOTE: If you are using Arch Linux and have a local copy of the Arch Build
-System (ABS) tree on your computer, or are using another distribution that
-provides a similar tree of build files, you can copy the provided
-PKGBUILD.proto file to a new package build directory and make customizations to
-suit your needs. An up to date prototype file can also be found in the source
-distribution of this package.
+NOTE: An example PKGBUILD, useful for reference, is located in '{pkgdatadir}'.
+Also located there are other example files such as a ChangeLog and an install
+script. You can copy the provided PKGBUILD.proto file to a new package build
+directory and make customizations to suit your needs.
 
 
 Options and Directives
@@ -40,23 +38,35 @@ This will prevent any possible name clashes with internal makepkg variables.
 For example, to store the base kernel version in a variable, use something
 similar to `$_basekernver`.
 
-*pkgname*::
+*pkgname (array)*::
 	The name of the package. This has be a unix-friendly name as it will be
-	used in the package filename.
+	used in the package filename. Members of the array are not allowed to start
+	with hyphens.
 
 *pkgver*::
 	The version of the software as released from the author (e.g. '2.7.1').
+	The variable is not allowed to contain colons or hyphens.
 
 *pkgrel*::
 	This is the release number specific to the Arch Linux release. This
 	allows package maintainers to make updates to the package's configure
-	flags, for example. A pkgrel of 1 is typically used for each upstream
-	software release and is incremented for intermediate PKGBUILD updates.
+	flags, for example. A pkgrel of '1' is typically used for each upstream
+	software release and is incremented for intermediate PKGBUILD updates. The
+	variable is not allowed to contain hyphens.
 
 *pkgdesc*::
 	This should be a brief description of the package and its functionality.
 	Try to keep the description to one line of text.
 
+*epoch*::
+	Used to force the package to be seen as newer than any previous versions
+	with a lower epoch, even if the version number would normally not trigger
+	such an upgrade. This value is required to be a positive integer; the
+	default value if left unspecified is '0'. This is useful when the version
+	numbering scheme of a package changes (or is alphanumeric), breaking normal
+	version comparison logic. See linkman:pacman[8] for more information on
+	version comparisons.
+
 *url*::
 	This field contains a URL that is associated with the software being
 	packaged. This is typically the project's website.
@@ -79,6 +89,12 @@ similar to `$_basekernver`.
 	be copied into the package by makepkg. It does not need to be included
 	in the source array (e.g. `install=pkgname.install`).
 
+*changelog*::
+	Specifies a changelog file that is to be included in the package.
+	This file should reside in the same directory as the PKGBUILD, and will
+	be copied into the package by makepkg. It does not need to be included
+	in the source array (e.g. `changelog=$pkgname.changelog`).
+
 *source (array)*::
 	An array of source files required to build the package. Source files
 	must either reside in the same directory as the PKGBUILD file, or be a
@@ -118,7 +134,8 @@ name. The syntax is: `source=('filename::url')`.
 
 *arch (array)*::
 	Defines on which architectures the given package is available (e.g.
-	`arch=('i686' 'x86_64')`).
+	`arch=('i686' 'x86_64')`). Packages that contain no architecture specific
+	files may use arch=('any').
 
 *backup (array)*::
 	A space-delimited array of filenames, without preceding slashes, that
@@ -139,12 +156,18 @@ name. The syntax is: `source=('filename::url')`.
 	needed at runtime. Packages in this list follow the same format as
 	depends.
 
+*checkdepends (array)*::
+	An array of packages that this package depends on to run its test suite,
+	but are not needed at runtime. Packages in this list follow the same
+	format as depends. These dependencies are only considered when the
+	check() function is present and is to be run by makepkg.
+
 *optdepends (array)*::
 	An array of packages (and accompanying reasons) that are not essential for
 	base functionality, but may be necessary to make full use of the contents
 	of this package. optdepends are currently for informational purposes only
 	and are not utilized by pacman during dependency resolution. The format
-	should be similar to the following:
+	for specifying optdepends is:
 
 	optdepends=('fakeroot: for makepkg usage as normal user')
 
@@ -178,8 +201,8 @@ name. The syntax is: `source=('filename::url')`.
 	in the options array. To reverse the default behavior, place an ``!'' at
 	the front of the option. Only specify the options you specifically want
 	to override, the rest will be taken from linkman:makepkg.conf[5].
-	*NOTE:* 'force' is a special option only used in a linkman:PKGBUILD[5],
-	do not use it unless you know what you are doing.
+	*NOTE:* 'force' is a now-removed option in favor of the top level 'epoch'
+	variable.
 
 	*strip*;;
 		Strip symbols from binaries and libraries. If you frequently
@@ -210,26 +233,27 @@ name. The syntax is: `source=('filename::url')`.
 		form `!distcc` with select packages that have problems building
 		with distcc.
 
+	*buildflags*;;
+		Allow the use of user-specific buildflags (CFLAGS, CXXFLAGS, LDFLAGS)
+		during build as specified in linkman:makepkg.conf[5]. More useful in
+		its negative form `!buildflags` with select packages that have problems
+		building with custom buildflags.
+
 	*makeflags*;;
 		Allow the use of user-specific makeflags during build as specified
 		in linkman:makepkg.conf[5]. More useful in its negative form
 		`!makeflags` with select packages that have problems building with
 		custom makeflags such as `-j2` (or higher).
 
-	*force*;;
-		Force the package to be upgraded by a pacman system upgrade
-		operation, even if the version number would normally not trigger
-		such an upgrade. This is useful when the version numbering scheme
-		of a package changes (or is alphanumeric). See linkman:pacman[8] for
-		more information on version comparisons.
-
 
 build() Function
 ----------------
-In addition to the above directives, the build() bash function comprises the
-remainder of the PKGBUILD. This is directly sourced and executed by makepkg, so
-anything that bash or the system has available is available for use here. Be
-sure any exotic commands used are covered by `makedepends`.
+In addition to the above directives, the optional build() bash function usually
+comprises the remainder of the PKGBUILD. This is directly sourced and executed
+by makepkg, so anything that bash or the system has available is available for
+use here. The function is run in `bash -e` mode, meaning any command that exits
+with a non-zero status will cause the function to exit. Be sure any exotic
+commands used are covered by `makedepends`.
 
 All of the above variables such as `pkgname` and `pkgver` are available for use
 in the build function. In addition, makepkg defines three variables for your
@@ -251,33 +275,45 @@ If you create any variables of your own in the build function, it is
 recommended to use the bash `local` keyword to scope the variable to inside
 the build function.
 
+check() Function
+----------------
+An optional check() function can be specified in which a packages test-suite
+may be run. This function is run between the build() and package() functions.
+The function is run in `bash -e` mode, meaning any command that exits with a
+non-zero status will cause the function to exit. Be sure any exotic commands
+used are covered by `checkdepends`.
+
 package() Function
 ------------------
-An optional package() function can be specified in addition to the build() function.
-This function is run immediately after the build() function. When specified in
-combination with the fakeroot BUILDENV option in linkman:makepkg.conf[5], fakeroot
-usage will be limited to running the packaging stage. The build() function will be
-run as the user calling makepkg.
+An optional package() function can be specified in addition to the build()
+function. This function is run after the build() and check() functions. The
+function is run in `bash -e` mode, meaning any command that exits with a
+non-zero status will cause the function to exit. When specified in combination
+with the fakeroot BUILDENV option in linkman:makepkg.conf[5], fakeroot usage
+will be limited to running the packaging stage. An existing build() function
+will be run as the user calling makepkg.
 
 Package Splitting
 -----------------
-makepkg supports building multiple packages from a single PKGBUILD. This is achieved
-by assigning an array of package names to the `pkgname` directive. Each split package
-uses a corresponding packaging function with name `package_foo()`, where `foo` is the
-name of the split package.
+makepkg supports building multiple packages from a single PKGBUILD. This is
+achieved by assigning an array of package names to the `pkgname` directive.
+Each split package uses a corresponding packaging function with name
+`package_foo()`, where `foo` is the name of the split package.
 
-All options and directives for the split packages default to the global values given
-within the PKGBUILD. However, some of these can be overridden within each split
-package's packaging function. The following variables can be overridden: `pkgdesc`,
-`license`, `groups`, `depends`, `optdepends`, `provides`, `conflicts`, `replaces`,
-`backup`, `options` and `install`.
+All options and directives for the split packages default to the global values
+given within the PKGBUILD. However, some of these can be overridden within each
+split package's packaging function. The following variables can be overridden:
+`pkgver`, `pkgrel`, `pkgdesc`, `arch`, `license`, `groups`, `depends`,
+`optdepends`, `provides`, `conflicts`, `replaces`, `backup`, `options`,
+`install` and `changelog`.
 
 An optional global directive is available when building a split package:
 
 *pkgbase*::
 	The name used to refer to the group of packages in the output of makepkg
 	and in the naming of source-only tarballs.  If not specified, the first
-	element in the `pkgname` array is used.
+	element in the `pkgname` array is used.  The variable is not allowed to
+	begin with a hyphen.
 
 Install/Upgrade/Remove Scripting
 --------------------------------
@@ -317,9 +353,8 @@ same directory as the PKGBUILD script. Then use the install directive:
 	install=pkgname.install
 
 The install script does not need to be specified in the source array. A
-template install file is available with the source distribution of this
-program, or one may be provided by your distribution. For example, Arch Linux
-provides prototype install files in the ABS tree.
+template install file is available in '{pkgdatadir}' as 'proto.install' for
+reference with all of the available functions defined.
 
 
 Development Directives

doc/footer.txt

@@ -18,13 +18,14 @@ Authors
 
 Current maintainers:
 
+* Allan McRae <allan@archlinux.org>
 * Dan McGee <dan@archlinux.org>
 * Xavier Chantry <shiningxc@gmail.com>
-* Aaron Griffin <aaron@archlinux.org>
 
 Past contributors:
 
 * Judd Vinet <jvinet@zeroflux.org>
 * Aurelien Foret <aurelien@archlinux.org>
+* Aaron Griffin <aaron@archlinux.org>
 
 See the 'AUTHORS' file for additional contributors.

doc/index.txt

@@ -43,15 +43,16 @@ configuration files dealing with pacman.
 * linkman:pacman[8]
 * linkman:pacman.conf[5]
 * linkman:repo-add[8]
+* linkman:vercmp[8]
 
 Changelog
 ~~~~~~~~~
 For a good idea of what is going on in pacman development, take a look at the
-link:http://projects.archlinux.org/?p=pacman.git[Gitweb] summary
-page for the project.
+link:http://projects.archlinux.org/pacman.git/[Git summary page] for the
+project.
 
 See the most recent
-link:http://projects.archlinux.org/?p=pacman.git;a=blob_plain;f=NEWS;hb=HEAD[NEWS]
+link:http://projects.archlinux.org/pacman.git/tree/NEWS[NEWS]
 file for a not-as-frequently-updated list of changes. However, this should
 contain the biggest changes in a format more concise than the commit log.
 
@@ -62,6 +63,14 @@ Releases
 `------------`-------
 Date         Version
 ---------------------
+2011-01-22   v3.4.3
+2010-12-29   v3.4.2
+2010-09-03   v3.4.1
+2010-06-16   v3.4.0
+2009-11-10   v3.3.3
+2009-10-05   v3.3.2
+2009-09-22   v3.3.1
+2009-08-02   v3.3.0
 2009-01-05   v3.2.2
 2008-08-26   v3.2.1
 2008-07-30   v3.2.0
@@ -106,8 +115,8 @@ Development
 Mailing List
 ~~~~~~~~~~~~
 There is a mailing list devoted to pacman development, hosted by Arch Linux.
-link:http://www.archlinux.org/mailman/listinfo/pacman-dev/[Subscribe] or
-link:http://www.archlinux.org/pipermail/pacman-dev/[view the archives].
+link:http://mailman.archlinux.org/mailman/listinfo/pacman-dev/[Subscribe] or
+link:http://mailman.archlinux.org/pipermail/pacman-dev/[view the archives].
 
 Source Code
 ~~~~~~~~~~~
@@ -122,7 +131,8 @@ The current development tree can be fetched with the following command:
 
 which will fetch the full development history into a directory named pacman.
 You can browse the source as well using
-link:http://projects.archlinux.org/?p=pacman.git[Gitweb].
+link:http://projects.archlinux.org/pacman.git/[cgit]. HTTP/HTTPS URLs are also
+available for cloning purposes; these URLs are listed at the above page.
 
 If you are interested in hacking on pacman, it is highly recommended you join
 the mailing list mentioned above, as well as take a quick glance at our
@@ -138,17 +148,17 @@ Other Utilities
 ~~~~~~~~~~~~~~~
 Although the package manager itself is quite simple, many scripts have been
 developed that help automate building and installing packages. These are used
-extensively in link:http://archlinux.org[Arch Linux]. Most of these utilities
+extensively in link:http://archlinux.org/[Arch Linux]. Most of these utilities
 are available in the Arch Linux projects
-link:http://projects.archlinux.org/[Gitweb browser].
+link:http://projects.archlinux.org/[code browser].
 
 Utilities available:
 
-* link:http://projects.archlinux.org/?p=abs.git[abs] - ABS (Arch Build System), scripts to download  & use the Arch Linux PKGBUILD tree
-* link:http://projects.archlinux.org/?p=devtools.git[devtools] - tools to assist in packaging and dependency checking
-* link:http://projects.archlinux.org/?p=namcap.git[namcap] - a package analysis utility written in python
-* link:http://projects.archlinux.org/?p=pacbuild.git[pacbuild] - a package building system utilizing a daemon
-* link:http://projects.archlinux.org/?p=srcpac.git[srcpac] - a bash build-from-source pacman wrapper
+* link:http://projects.archlinux.org/abs.git/[abs] - ABS (Arch Build System), scripts to download  & use the Arch Linux PKGBUILD tree
+* link:http://projects.archlinux.org/dbscripts.git/[dbscripts] - scripts used by Arch Linux to manage the main package repositories
+* link:http://projects.archlinux.org/devtools.git/[devtools] - tools to assist in packaging and dependency checking
+* link:http://projects.archlinux.org/namcap.git/[namcap] - a package analysis utility written in python
+* link:http://projects.archlinux.org/srcpac.git/[srcpac] - a bash build-from-source pacman wrapper
 
 Bugs
 ----
@@ -157,7 +167,7 @@ mailing last at mailto:pacman-dev@archlinux.org[] with specific information
 such as your commandline, the nature of the bug, and even the package database
 if it helps.
 
-You can also post a bug to the Archlinux bug tracker
+You can also post a bug to the Arch Linux bug tracker
 link:http://bugs.archlinux.org/index.php?project=3[Flyspray]. Be sure to file
 bugs under the Pacman project.
 
@@ -185,7 +195,7 @@ Pacman/libalpm frontends:
 
 Copyright
 ---------
-pacman is Copyright (C) 2006-2009 Pacman Development Team
+pacman is Copyright (C) 2006-2011 Pacman Development Team
 <pacman-dev@archlinux.org> and Copyright (C) 2002-2006 Judd Vinet
 <jvinet@zeroflux.org> and is licensed through the GNU General Public License,
 version 2 or later.

doc/makepkg.8.txt

@@ -53,7 +53,7 @@ Options
 	in linkman:makepkg.conf[5].
 
 *--config* <`/path/to/config`>::
-	Use an alternate config file instead of the `/etc/makepkg.conf` default;
+	Use an alternate config file instead of the `{sysconfdir}/makepkg.conf` default;
 
 *-d, \--nodeps*::
 	Do not perform any dependency checks. This will let you override and
@@ -81,10 +81,14 @@ Options
 
 *-g, \--geninteg*::
 	For each source file in the source array of PKGBUILD, download the file
-	if required and generate integrity checks. The integrity checks
-	generated are determined by the value of the INTEGRITY_CHECK array in
-	linkman:makepkg.conf[5]. This output can be redirected into your
-	PKGBUILD for source validation using "`makepkg -g >> PKGBUILD`".
+	if required and generate integrity checks. The integrity checks generated
+	are determined by the checks present in the PKGBUILD, falling back to the
+	value of the INTEGRITY_CHECK array in makepkg.conf(5) if these are absent
+	This output can be redirected into your PKGBUILD for source validation
+	using "`makepkg -g >> PKGBUILD`".
+
+*--skipinteg*::
+	Do not perform any integrity checks, just print a warning instead.
 
 *-h, \--help*::
 	Output syntax and command line options.
@@ -142,7 +146,19 @@ Options
 	Do not actually build the package, but build a source-only tarball that
 	does not include sources that can be fetched via a download URL. This is
 	useful for passing a single tarball to another program such as a chroot,
-	remote builder, or a tarball upload.
+	remote builder, or a tarball upload. Because integrity checks are verified,
+	all source files of the package need to be present or downloadable.
+
+*\--pkg <`list`>*::
+	Only build listed packages from a split package. The use of quotes is
+	necessary when specifying multiple packages. e.g. `--pkg "pkg1 pkg3"`
+
+*\--check*::
+	Run the check() function in the PKGBUILD, overriding the setting in
+	linkman:makepkg.conf[5].
+
+*\--nocheck*::
+	Do not run the check() function in the PKGBUILD or handle the checkdepends.
 
 *\--noconfirm*::
 	(Passed to pacman) Prevent pacman from waiting for user input before
@@ -161,6 +177,23 @@ separate utility 'versionpkg'. See linkman:PKGBUILD[5] for details on how to
 set up a development PKGBUILD.
 
 
+Environment Variables
+---------------------
+*PACMAN*::
+	The command that will be used to check for missing dependencies and to
+	install and remove packages. Pacman's -Qq, -Rns, -S, -T, and -U
+	operations must be supported by this command. If the variable is not
+	set or empty, makepkg will fall back to `pacman'.
+
+**PKGDEST=**"/path/to/folder"::
+	Folder where the resulting packages will be stored. Overrides the
+	corresponding value defined in linkman:makepkg.conf[5].
+
+**SRCDEST=**"/path/to/folder"::
+	Folder where the downloaded sources will be stored. Overrides the
+	corresponding value defined in linkman:makepkg.conf[5].
+
+
 Configuration
 -------------
 See linkman:makepkg.conf[5] for more details on configuring makepkg using the

doc/makepkg.conf.5.txt

@@ -93,6 +93,11 @@ Options
 		be disabled for individual packages by placing `!ccache` in the
 		PKGBUILD options array.
 
+	*check*;;
+		Run the check() function if present in the PKGBUILD. This can be
+		enabled or disabled for individual packages through the use of
+		makepkg's `--check` and `--nocheck` options respectively.
+
 **DISTCC_HOSTS=**"host1 ..."::
 	If using DistCC, this is used to specify a space-delimited list of hosts
 	running in the DistCC cluster. In addition, you will want to modify your
@@ -135,6 +140,18 @@ Options
 	affects both generation and checking. The current valid options are:
 	`md5`, `sha1`, `sha256`, `sha384`, and `sha512`.
 
+**STRIP_BINARIES=**"--strip-all"::
+	Options to be used when stripping binaries. See linkman:strip[1]
+	for details.
+
+**STRIP_SHARED=**"--strip-unneeded"::
+	Options to be used when stripping shared libraries. See linkman:strip[1]
+	for details.
+
+**STRIP_STATIC=**"--strip-debug"::
+	Options to be used when stripping static libraries. See  linkman:strip[1]
+	for details.
+
 **MAN_DIRS=(**{usr{,/local}{,/share},opt/*}/{man,info} ...**)**::
 	If `zipman` is specified in the OPTIONS array, this variable will
 	instruct makepkg where to look to compress manual (man and info)
@@ -148,13 +165,6 @@ Options
 	that are located in opt/, you may need to add the directory to this
 	array. *NOTE:* Do not add the leading slash to the directory name.
 
-**STRIP_DIRS=(**bin lib sbin usr/{bin,lib} ...**)**::
-	If `strip` is specified in the OPTIONS array, this variable will
-	instruct makepkg where to look to for files to strip. If you build
-	packages that are located in opt/, you may need to add the directory
-	to this array. *NOTE:* Do not add the leading slash to the directory
-	name.
-
 **PURGE_TARGETS=(**usr/{,share}/info/dir .podlist *.pod...**)**::
 	If `purge` is specified in the OPTIONS array, this variable will
 	instruct makepkg which files to remove from the package. This is
@@ -171,14 +181,20 @@ Options
 	in the current directory. Many people like to keep all source files in
 	a central location for easy cleanup, so this path can be set here.
 
+**SRCPKGDEST=**"/path/to/folder"::
+	If this value is not set, source package files will be stored in
+	in the current directory. Many people like to keep all source package files
+	in a central location for easy cleanup, so this path can be set here.
+
 **PACKAGER=**"John Doe <john@example.com>"::
 	This value is used when querying a package to see who was the builder.
 	It is recommended you change this to your name and email address.
 
-*PKGEXT*, *SRCEXT*::
+**PKGEXT=**".pkg.tar.gz", **SRCEXT=**".src.tar.gz"::
+	Sets the compression used when making compiled or source packages. The
+	current valid suffixes are `.tar`, `.tar.gz`, `.tar,bz2` and `.tar.xz`.
 	Do not touch these unless you know what you are doing.
 
-
 See Also
 --------
 linkman:makepkg[8], linkman:pacman[8], linkman:PKGBUILD[5]

doc/pacman.8.txt

@@ -28,6 +28,12 @@ front ends to be written (for instance, a GUI front end).
 
 Operations
 ----------
+*-D, \--database*::
+	Modify the package database. This options allows you to modify certain
+	attributes of the installed packages in pacman's database. At the
+	moment, you can only change the install reason using '\--asdeps' and
+	'\--asexplicit' options.
+
 *-Q, \--query*::
 	Query the package database. This operation allows you to view installed
 	packages and their files, as well as meta-information about individual
@@ -73,6 +79,11 @@ to determine which packages need upgrading. This behavior operates as follows:
     1.0a < 1.0alpha < 1.0b < 1.0beta < 1.0p < 1.0pre < 1.0rc < 1.0
   Numeric:
     1 < 1.0 < 1.1 < 1.1.1 < 1.2 < 2.0 < 3.0.0
++
+Additionally, version strings can have an 'epoch' value defined that will
+overrule any version comparison (unless the epoch values are equal). This is
+specified in an `epoch:version-rel` format. For example, `2:1.0-1` is always
+greater than `1:3.6-1`.
 
 *-T, \--deptest*::
 	Check dependencies; this is useful in scripts such as makepkg to check
@@ -82,9 +93,11 @@ to determine which packages need upgrading. This behavior operates as follows:
 	"bash>=3.2"`.
 
 *-U, \--upgrade*::
-	Upgrade or add package(s) to the system. Either a URL or file path can be
-	specified. This is a ``remove-then-add'' process. See <<HCF,Handling Config
-	Files>> for an explanation on how pacman takes care of config files.
+	Upgrade or add package(s) to the system and install the required
+	dependencies from sync repos. Either a URL or file path can be
+	specified. This is a ``remove-then-add'' process. See <<UO,Upgrade
+	Options>> below; also see <<HCF,Handling Config Files>> for an explanation
+	on how pacman takes care of config files.
 
 *-V, \--version*::
 	Display version and exit.
@@ -96,35 +109,12 @@ to determine which packages need upgrading. This behavior operates as follows:
 
 Options
 -------
-*\--asdeps*::
-	Install packages non-explicitly; in other words, fake their install reason
-	to be installed as a dependency. This is useful for makepkg and other
-	build from source tools that need to install dependencies before building
-	the package.
-
-*\--asexplicit*::
-	Install packages explicitly; in other words, fake their install reason to
-	be explicitly installed. This is useful if you want to mark a dependency
-	as explicitly installed so it will not be removed by the '\--recursive'
-	remove operation.
-
 *-b, \--dbpath* <'path'>::
 	Specify an alternative database location (a typical default is
-	``/var/lib/pacman'').  This should not be used unless you know what you are
+	``{localstatedir}/lib/pacman'').  This should not be used unless you know what you are
 	doing. *NOTE*: if specified, this is an absolute path and the root path is
 	not automatically prepended.
 
-*-d, \--nodeps*::
-	Skips all dependency checks. Normally, pacman will always check a
-	package's dependency fields to ensure that all dependencies are
-	installed and there are no package conflicts in the system.
-
-*-f, \--force*::
-	Bypass file conflict checks and overwrite conflicting files. If the
-	package that is about to be installed contains files that are already
-	installed, this option will cause all those files to be overwritten.
-	This option should be used with care, ideally not at all.
-
 *-r, \--root* <'path'>::
 	Specify an alternative installation root (default is ``/''). This should
 	not be used as a way to install software into ``/usr/local'' instead of
@@ -137,19 +127,22 @@ Options
 *-v, \--verbose*::
 	Output paths such as as the Root, Conf File, DB Path, Cache Dirs, etc.
 
-*\--debug*::
-	Display debug messages. When reporting bugs, this option is recommended
-	to be used.
+*\--arch* <'arch'>::
+	Specify an alternate architecture.
 
 *\--cachedir* <'dir'>::
 	Specify an alternative package cache location (a typical default is
-	``/var/cache/pacman/pkg''). Multiple cache directories can be specified,
+	``{localstatedir}/cache/pacman/pkg''). Multiple cache directories can be specified,
 	and they are tried in the order they are passed to pacman. *NOTE*: this
 	is an absolute path, the root path is not automatically prepended.
 
 *\--config* <'file'>::
 	Specify an alternate configuration file.
 
+*\--debug*::
+	Display debug messages. When reporting bugs, this option is recommended
+	to be used.
+
 *\--logfile* <'file'>::
 	Specify an alternate log file. This is an absolute path, regardless of
 	the installation root setting.
@@ -158,6 +151,17 @@ Options
 	Bypass any and all ``Are you sure?'' messages. It's not a good idea to do
 	this unless you want to run pacman from a script.
 
+Transaction Options (apply to '-S', '-R' and '-U')
+--------------------------------------------------
+*-d, \--nodeps*::
+	Skips dependency version checks. Package names are still checked. Normally,
+	pacman will always check a package's dependency fields to ensure that all
+	dependencies are installed and there are no package conflicts in the
+	system. Specify this option twice to skip all dependency checks.
+
+*-k, \--dbonly*::
+	Adds/Removes the database entry only, leaves all files in place.
+
 *\--noprogressbar*::
 	Do not show a progress bar when downloading files. This can be useful
 	for scripts that call pacman and capture the output.
@@ -166,25 +170,62 @@ Options
 	If an install scriptlet exists, do not execute it. Do not use this
 	unless you know what you are doing.
 
+*-p, \--print*::
+	Only print the targets instead of performing the actual operation (sync,
+	remove or upgrade). Use '\--print-format' to specify how targets are
+	displayed. The default format string is "%l", which displays URLs with
+	'-S', filenames with '-U' and pkgname-pkgver with '-R'.
+
+*\--print-format* <'format'>::
+	Specify a printf-like format to control the output of the '\--print'
+	operation. The possible attributes are: %n for pkgname, %v for pkgver,
+	%l for location, %r for repo and %s for size.
+
+Upgrade Options (apply to '-S' and '-U')[[UO]]
+--------------------------------------------
+*-f, \--force*::
+	Bypass file conflict checks and overwrite conflicting files. If the
+	package that is about to be installed contains files that are already
+	installed, this option will cause all those files to be overwritten.
+	This option should be used with care, ideally not at all.
+
+*\--asdeps*::
+	Install packages non-explicitly; in other words, fake their install reason
+	to be installed as a dependency. This is useful for makepkg and other
+	build from source tools that need to install dependencies before building
+	the package.
+
+*\--asexplicit*::
+	Install packages explicitly; in other words, fake their install reason to
+	be explicitly installed. This is useful if you want to mark a dependency
+	as explicitly installed so it will not be removed by the '\--recursive'
+	remove operation.
+
+*\--ignore* <'package'>::
+	Directs pacman to ignore upgrades of package even if there is one
+	available. Multiple packages can be specified by separating them
+	with a comma.
+
+*\--ignoregroup* <'group'>::
+	Directs pacman to ignore upgrades of all packages in 'group' even if
+	there is one available. Multiple groups can be specified by
+	separating them with a comma.
 
 Query Options[[QO]]
 -------------------
 *-c, \--changelog*::
-	View the ChangeLog of a package. Not every package will provide one but
-	it will be shown if available.
+	View the ChangeLog of a package if it exists.
 
 *-d, \--deps*::
 	Restrict or filter output to packages installed as dependencies. This
-	option can be combined with '-t' for listing real orphans- packages that
+	option can be combined with '-t' for listing real orphans - packages that
 	were installed as dependencies but are no longer required by any
-	installed package. ('-Qdt' is equivalent to the pacman 3.0.X '-Qe'
-	option.)
+	installed package.
 
 *-e, \--explicit*::
-	Restrict or filter output to packages explicitly installed. This option
-	can be combined with '-t' to list top-level packages- those packages
-	that were explicitly installed but are not required by any other
-	package. ('-Qet' is equivalent to the pacman 2.9.X '-Qe' option.)
+	Restrict or filter output to explicitly installed packages. This option
+	can be combined with '-t' to list explicitly installed packages which
+	are not required by any other package.
 
 *-g, \--groups*::
 	Display all packages that are members of a named group. If a name is not
@@ -211,8 +252,8 @@ Query Options[[QO]]
 	and installed with '\--upgrade'.
 
 *-o, \--owns* <'file'>::
-	Search for the package that owns file. The path can be relative or
-	absolute.
+	Search for packages that own the specified file(s). The path can be
+	relative or absolute and one or more files can be specified.
 
 *-p, \--file*::
 	Signifies that the package supplied on the command line is a file and
@@ -230,10 +271,9 @@ Query Options[[QO]]
 	rather than names and versions.
 
 *-s, \--search* <'regexp'>::
-	This will search each locally-installed package for names or
-	descriptions that match `regexp`. When you include multiple search
-	terms, only packages with descriptions matching ALL of those terms will
-	be returned.
+	Search each locally-installed package for names or descriptions that
+	match `regexp`. When including multiple search terms, only packages
+	with descriptions matching ALL of those terms are returned.
 
 *-t, \--unrequired*::
 	Restrict or filter output to packages not required by any currently
@@ -253,9 +293,6 @@ Remove Options[[RO]]
 	or more target packages. This operation is recursive, and must be used
 	with care since it can remove many potentially needed packages.
 
-*-k, \--keep*::
-	Removes the database entry only. Leaves all files in place.
-
 *-n, \--nosave*::
 	Instructs pacman to ignore file backup designations. Normally, when a
 	file is removed from the system the database is checked to see if the
@@ -269,7 +306,7 @@ Remove Options[[RO]]
 	orphans. If you want to omit condition (B), pass this option twice.
 
 *-u, \--unneeded*::
-	Removes the targets that are not required by any other packages.
+	Removes targets that are not required by any other packages.
 	This is mostly useful when removing a group without using the '-c' option,
 	to avoid breaking any dependencies.
 
@@ -296,18 +333,14 @@ linkman:pacman.conf[5].
 	view all groups and their members.
 
 *-i, \--info*::
-	Display dependency and other information for a given package. This will
-	search through all repositories for a matching package.
+	Display information on a given sync database package. Passing two '\--info'
+	or '-i' flags will also display those packages in all repositories that
+	depend on this package.
 
 *-l, \--list*::
 	List all packages in the specified repositories. Multiple repositories
 	can be specified on the command line.
 
-*-p, \--print-uris*::
-	Print out URIs for each package that will be installed, including any
-	dependencies yet to be installed. These can be piped to a file and
-	downloaded at a later time, using a program like wget.
-
 *-q, \--quiet*::
 	Show less information for certain sync operations. (This is useful when
 	pacman's output is processed in a script.) Search will only show package
@@ -330,31 +363,22 @@ linkman:pacman.conf[5].
 	necessary. Pass this option twice to enable package downgrade; in this
 	case pacman will select sync packages whose version does not match with
 	the local version. This can be useful when the user switches from a testing
-	repo to a stable one.
+	repo to a stable one. Additional targets can also be specified manually, so
+	that '-Su foo' will do a system upgrade and install/upgrade the foo package in
+	the same operation.
 
 *-w, \--downloadonly*::
-	Retrieve all packages from the server, but do not install/upgrade
-	anything.
+	Retrieve all packages from the server, but do not install/upgrade anything.
 
 *-y, \--refresh*::
 	Download a fresh copy of the master package list from the server(s)
 	defined in linkman:pacman.conf[5]. This should typically be used each time
 	you use	'\--sysupgrade' or '-u'. Passing two '\--refresh' or '-y' flags
-	will force a refresh of all package lists even if they are thought to be up
+	will force a refresh of all package lists even if they appear to be up
 	to date.
 
 *\--needed*::
-	Don't reinstall the targets that are already up-to-date.
-
-*\--ignore* <'package'>::
-	Directs pacman to ignore upgrades of package even if there is one
-	available. Multiple packages can be specified by separating them
-	with a comma.
-
-*\--ignoregroup* <'group'>::
-	Directs pacman to ignore upgrades of all packages in 'group' even if
-	there is one available. Multiple groups can be specified by
-	separating them with a comma.
+	Don't reinstall the targets that are already up to date.
 
 
 Handling Config Files[[HCF]]
@@ -367,7 +391,7 @@ actual file existing on the filesystem. After comparing these 3 hashes, the
 follow scenarios can result:
 
 original=X, current=X, new=X::
-	All three files are the same, so overwrites are not an issue Install the
+	All three files are the same, so overwrites are not an issue. Install the
 	new file.
 
 original=X, current=X, new=Y::
@@ -388,6 +412,25 @@ original=X, current=Y, new=Z::
 	necessary changes into the original file.
 
 
+Examples
+--------
+
+pacman -Ss ne.hack::
+	Search for regexp "ne.hack" in package database.
+
+pacman -S gpm::
+	Download and install gpm including dependencies.
+
+pacman -U /home/user/ceofhack-0.6-1-x86_64.pkg.tar.gz::
+	Install ceofhack-0.6-1 package from a local file.
+
+pacman -Syu::
+	Update package list and upgrade all packages afterwards.
+
+pacman -Syu gpm::
+	Update package list, upgrade all packages, and then install gpm if it
+	wasn't already installed.
+
 Configuration
 -------------
 See linkman:pacman.conf[5] for more details on configuring pacman using the

doc/pacman.conf.5.txt

@@ -35,7 +35,7 @@ NoUpgrade = etc/passwd etc/group etc/shadow
 NoUpgrade = etc/fstab
 
 [core]
-Include = /etc/pacman.d/core
+Include = {sysconfdir}/pacman.d/core
 
 [custom]
 Server = file:///home/pkgs
@@ -57,13 +57,13 @@ Options
 
 *DBPath =* path/to/db/dir::
 	Overrides the default location of the toplevel database directory.  A
-	typical default is ``/var/lib/pacman/''. Most users will not need to set
+	typical default is ``{localstatedir}/lib/pacman/''. Most users will not need to set
 	this option. *NOTE*: if specified, this is an absolute path and the root
 	path is not automatically prepended.
 
 *CacheDir =* path/to/cache/dir::
 	Overrides the default location of the package cache directory. A typical
-	default is ``/var/cache/pacman/pkg/''. Multiple cache directories can be
+	default is ``{localstatedir}/cache/pacman/pkg/''. Multiple cache directories can be
 	specified, and they are tried in the order they are listed in the config
 	file. If a file is not found in any cache directory, it will be downloaded
 	to the first cache directory with write access. *NOTE*: this is an absolute
@@ -72,7 +72,7 @@ Options
 
 *LogFile =* '/path/to/file'::
 	Overrides the default location of the pacman log file. A typical default
-	is ``/var/log/pacman.log''. This is an absolute path and the root directory
+	is ``{localstatedir}/log/pacman.log''. This is an absolute path and the root directory
 	is not prepended.
 
 *HoldPkg =* package ...::
@@ -86,8 +86,11 @@ Options
 *SyncFirst =* package ...::
 	Instructs pacman to check for newer version of these packages before any
 	sync operation. The user will have the choice to either cancel the current
-	operation and upgrade these packages first or go on with the current operation.
-	This option is typically used with the 'pacman' package.
+	operation and upgrade these packages first or go on with the current
+	operation. This option is typically used with the 'pacman' package.
+	*NOTE*: when a `SyncFirst` transaction takes place, no command line flags
+	(e.g. '\--force') are honored. If this is not ideal, disabling `SyncFirst`
+	and performing a manual sync of the involved packages may be required.
 
 *IgnoreGroup =* group ...::
 	Instructs pacman to ignore any upgrades for all packages in this
@@ -95,7 +98,16 @@ Options
 
 *Include =* path::
 	Include another config file. This file can include repositories or
-	general configuration  options.
+	general configuration options. Wildcards in the specified paths will get
+	expanded based on linkman:glob[7] rules.
+
+*Architecture =* auto | i686 | x86_64 | ...::
+	If set, pacman will only allow installation of packages of the given
+	architecture (e.g. 'i686', 'x86_64', etc). The special value 'auto' will
+	use the system architecture, provided by in ``uname -m''.  If unset, no
+	architecture checks are made. *NOTE*: packages with the special
+	architecture 'any' can always be installed, as they are meant to be
+	architecture independent.
 
 *XferCommand =* /path/to/command %u::
 	If set, an external program will be used to download all remote files.
@@ -108,9 +120,6 @@ Options
 	http/ftp support, or need the more advanced proxy support that comes with
 	utilities like wget.
 
-*NoPassiveFtp*::
-	Disables passive ftp connections when downloading packages. (aka Active Mode)
-
 *NoUpgrade =* file ...::
 	All files listed with a `NoUpgrade` directive will never be touched during
 	a package install/upgrade, and the new files will be installed with a
@@ -127,18 +136,20 @@ Options
 	These files refer to files in the package archive, so do not include the
 	leading slash (the RootDir) when specifying them.
 
-*CleanMethod =* KeepInstalled | KeepCurrent::
+*CleanMethod =* KeepInstalled &| KeepCurrent::
 	If set to `KeepInstalled` (the default), the '-Sc' operation will clean
 	packages that are no longer installed (not present in the local database).
 	If set to `KeepCurrent`, '-Sc' will clean outdated packages (not present in
 	any sync database).
 	The second behavior is useful when the package cache is shared among
 	multiple machines, where the local databases are usually different, but the
-	sync databases in use could be the same.
+	sync databases in use could be the same. If both values are specified,
+	packages are only cleaned if not installed locally and not present in any
+	known sync database.
 
 *UseSyslog*::
 	Log action messages through syslog(). This will insert log entries into
-	``/var/log/messages'' or equivalent.
+	``{localstatedir}/log/messages'' or equivalent.
 
 *ShowSize*::
 	Display the size of individual packages for '\--sync' and '\--query' modes.
@@ -153,6 +164,10 @@ Options
 	than the percent of each individual download target. The progress
 	bar is still based solely on the current file download.
 
+*CheckSpace*::
+	Performs an approximate check for adequate available disk space before
+	installing packages.
+
 Repository Sections
 -------------------
 Each repository section defines a section name and at least one location where
@@ -171,15 +186,17 @@ contain a file that lists the servers for that repository.
 # use this repository first
 Server = ftp://ftp.archlinux.org/core/os/arch
 # next use servers as defined in the mirrorlist below
-Include = /etc/pacman.d/mirrorlist
+Include = {sysconfdir}/pacman.d/mirrorlist
 --------
 
 During parsing, pacman will define the `$repo` variable to the name of the
 current section. This is often utilized in files specified using the 'Include'
-directive so all repositories can use the same mirrorfile.
+directive so all repositories can use the same mirrorfile. pacman also defines
+the `$arch` variable to the value of `Architecture`, so the same mirrorfile can
+even be used for different architectures.
 
 --------
-Server = ftp://ftp.archlinux.org/$repo/os/arch
+Server = ftp://ftp.archlinux.org/$repo/os/$arch
 --------
 
 The order of repositories in the configuration files matters; repositories

doc/repo-add.8.txt

@@ -10,7 +10,7 @@ repo-add - package database maintenance utility
 
 Synopsis
 --------
-repo-add [-q] <path-to-db> <package1> [<package2> ...]
+repo-add [-d] [-f] [-q] <path-to-db> <package1> [<package2> ...]
 
 repo-remove [-q] <path-to-db> <packagename> [<packagename2> ...]
 
@@ -30,11 +30,19 @@ on the command line.
 
 Options
 -------
+*-d, \--delta*::
+	Automatically generate and add a delta file between the old entry and the
+	new one, if the old package file is found next to the new one.
+
+*-f, \--files*::
+	Tells repo-add also to create and include a list of the files in the
+	specified packages. This is useful for creating databases listing all files
+	in a given sync repository for tools that may use this information.
+
 *-q, \--quiet*::
 	Force this program to keep quiet and run silent except for warning and
 	error messages.
 
-
 See Also
 --------
 linkman:makepkg[8], linkman:pacman[8]

doc/translation-help.txt

@@ -4,13 +4,17 @@ Pacman - Translating
 This document is here to guide you in helping translate pacman messages,
 libalpm messages, and the manpages for the entire pacman package.
 
-A quick note- the gettext website is a very useful guide to read before
-embarking on translation work, as it describes many of the commands in more
-detail than I will here:
-http://www.gnu.org/software/gettext/manual/html_node/gettext.html[]
+We are currently using http://www.transifex.net/[Transifex] as the translation
+platform for pacman and libalpm. You will need to sign up for an account there
+and then register with a translation team on the
+http://www.transifex.net/projects/p/archlinux-pacman/[pacman project page].
 
-In addition, this site presents a small tutorial that I found useful:
-http://oriya.sarovar.org/docs/gettext/[]
+NOTE: This may be old information due to our switch to Transifex, but the
+gettext website is a very useful guide to read before embarking on translation
+work, as it describes many of the commands in more detail than I will here:
+http://www.gnu.org/software/gettext/manual/html_node/gettext.html[].  In
+addition, this site presents a small tutorial that I found useful:
+http://oriya.sarovar.org/docs/gettext/[].
 
 
 Translating Messages
@@ -28,35 +32,31 @@ original message and the corresponding translation. These po files can then
 either be hand edited, or modified with a tool such as poedit, gtranslator or
 kbabel. Using a translation tool tends to make the job easier.
 
+Please read up on Transifex usage using the
+http://help.transifex.net/[Transifex Help] if you are not familiar.
+
 See the <<Notes,Notes>> section for additional hints on translating.
 
 Pre-release Updates
 ~~~~~~~~~~~~~~~~~~~
 
 A week or two before each release, the codebase will go into a string freeze
-and an email will be sent by the 'translation lieutenant' to the
-mailto:pacman-dev@archlinux.org[pacman-dev] mailing list asking for
-translations. This email will have a prefix of *[translation]* for anyone
-looking to set up an email filter.
+and an email will be sent to the mailto:pacman-dev@archlinux.org[pacman-dev]
+mailing list asking for translations. This email will have a prefix of
+*[translation]* for anyone looking to set up an email filter.
 
-At this time, the `.po` language files will be made available at a URL
-specified in the email. Each language will have two files available (backend
-and frontend). Translators interested in helping are encouraged to send a
-follow-up message to the mailing list stating exactly what they intend to
-translate so efforts are not duplicated on the same language.
+At this time, the latest `.po` language files will be made available at the
+Transifex project page.  Each language will have two files available (backend
+and frontend). Translators interested in helping are encouraged to use the
+features of Transifex to let others know they are currently translating their
+language.
 
 Once a translator has completed the translation (*OR* realizes they do not have
-time to finish), please email the `.po` files back to the list with a subject
-such as '[translation] Updated German translation'. At this point, the
-'translation lieutenant' will gather the translations together for inclusion in
-the upcoming release.
+time to finish), please upload your progress back to the Transifex site.
 
-NOTE: Please email your translations back to the list as soon as possible- this
-will give other speakers of your language time to review your translations and
-update them as necessary.
-
-For those familiar with GIT, you may wish to follow the procedure outlined
-below as another alternative.
+NOTE: Please upload your translations as soon as possible- this will give other
+speakers of your language time to review your translations and update them as
+necessary.
 
 Incremental Updates
 ~~~~~~~~~~~~~~~~~~~

doc/vercmp.8.txt

@@ -0,0 +1,71 @@
+/////
+vim:set ts=4 sw=4 syntax=asciidoc noet:
+/////
+vercmp(8)
+=========
+
+Name
+----
+vercmp - version comparsion utility
+
+
+Synopsis
+--------
+'vercmp' <version1> <version2>
+
+
+Description
+-----------
+'vercmp' is used to determine the relationship between two given version
+numbers. It outputs values as follows:
+
+*  < 0 : if ver1 < ver2
+*  = 0 : if ver1 == ver2
+*  > 0 : if ver1 > ver2
+
+Version comparsion operates as follows:
+
+  Alphanumeric:
+    1.0a < 1.0alpha < 1.0b < 1.0beta < 1.0p < 1.0pre < 1.0rc < 1.0
+  Numeric:
+    1 < 1.0 < 1.1 < 1.1.1 < 1.2 < 2.0 < 3.0.0
+
+Additionally, version strings can have an 'epoch' value defined that will
+overrule any version comparison (unless the epoch values are equal). This is
+specified in an `epoch:version-rel` format. For example, `2:1.0-1` is always
+greater than `1:3.6-1`.
+
+
+Options
+-------
+*-h, \--help*::
+	Display syntax for the given operation. If no operation was supplied
+	then the general syntax is shown.
+
+Examples
+--------
+
+  $ vercmp 1 2
+  -1
+
+  $ vercmp 2 1
+  1
+
+  $ vercmp 2.0-1 1.7-6
+  1
+
+  $ vercmp 2.0 2.0-13
+  0
+
+  $ vercmp 4.34 1:001
+  -1
+
+Configuration
+-------------
+There is none.
+
+See Also
+--------
+linkman:pacman[8], linkman:makepkg[8], linkman:libalpm[3]
+
+include::footer.txt[]

etc/Makefile.am

@@ -13,6 +13,9 @@ edit = sed \
 	-e 's|@PACKAGE_NAME[@]|$(PACKAGE_NAME)|g' \
 	-e 's|@PKGEXT[@]|$(PKGEXT)|g' \
 	-e 's|@SRCEXT[@]|$(SRCEXT)|g' \
+	-e 's|@STRIP_BINARIES[@]|$(STRIP_BINARIES)|g' \
+	-e 's|@STRIP_SHARED[@]|$(STRIP_SHARED)|g' \
+	-e 's|@STRIP_STATIC[@]|$(STRIP_STATIC)|g' \
 	-e 's|@CARCH[@]|$(CARCH)|g' \
 	-e 's|@CHOST[@]|$(CHOST)|g' \
 	-e 's|@ARCHSWITCH[@]|$(ARCHSWITCH)|g' \

etc/makepkg.conf.in

@@ -26,7 +26,7 @@ DLAGENTS=('ftp::/usr/bin/wget -c --passive-ftp -t 3 --waitretry=3 -O %o %u'
 CARCH="@CARCH@"
 CHOST="@CHOST@"
 
-#-- Exclusive: will only run on @CARCHFLAGS@
+#-- Exclusive: will only run on @CARCH@
 # -march (or -mcpu) builds exclusively for an architecture
 # -mtune optimizes for an architecture, but builds for whole processor family
 CFLAGS="@CARCHFLAGS@-mtune=generic -O2 -pipe"
@@ -39,15 +39,16 @@ CXXFLAGS="@CARCHFLAGS@-mtune=generic -O2 -pipe"
 # BUILD ENVIRONMENT
 #########################################################################
 #
-# Defaults: BUILDENV=(fakeroot !distcc color !ccache)
+# Defaults: BUILDENV=(fakeroot !distcc color !ccache check)
 #  A negated environment option will do the opposite of the comments below.
 #
 #-- fakeroot: Allow building packages as a non-root user
 #-- distcc:   Use the Distributed C/C++/ObjC compiler
 #-- color:    Colorize output messages
 #-- ccache:   Use ccache to cache compilation
+#-- check:    Run the check() function if present in the PKGBUILD
 #
-BUILDENV=(fakeroot !distcc color !ccache)
+BUILDENV=(fakeroot !distcc color !ccache check)
 #
 #-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
 #-- specify a space-delimited list of hosts running in the DistCC cluster.
@@ -61,7 +62,7 @@ BUILDENV=(fakeroot !distcc color !ccache)
 # Default: OPTIONS=(strip docs libtool emptydirs zipman purge)
 #  A negated option will do the opposite of the comments below.
 #
-#-- strip:     Strip symbols from binaries/libraries in STRIP_DIRS
+#-- strip:     Strip symbols from binaries/libraries
 #-- docs:      Save doc directories specified by DOC_DIRS
 #-- libtool:   Leave libtool (.la) files in packages
 #-- emptydirs: Leave empty directories in packages
@@ -72,12 +73,16 @@ OPTIONS=(strip docs libtool emptydirs zipman purge)
 
 #-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
 INTEGRITY_CHECK=(md5)
+#-- Options to be used when stripping binaries. See `man strip' for details.
+STRIP_BINARIES="@STRIP_BINARIES@"
+#-- Options to be used when stripping shared libraries. See `man strip' for details.
+STRIP_SHARED="@STRIP_SHARED@"
+#-- Options to be used when stripping static libraries. See `man strip' for details.
+STRIP_STATIC="@STRIP_STATIC@"
 #-- Manual (man and info) directories to compress (if zipman is specified)
 MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
 #-- Doc directories to remove (if !docs is specified)
 DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
-#-- Directories to be searched for the strip option (if strip is specified)
-STRIP_DIRS=(bin lib sbin usr/{bin,lib,sbin,local/{bin,lib,sbin}} opt/*/{bin,lib,sbin})
 #-- Files to be removed from all packages (if purge is specified)
 PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
 
@@ -91,6 +96,8 @@ PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
 #PKGDEST=/home/packages
 #-- Source cache: specify a fixed directory where source files will be cached
 #SRCDEST=/home/sources
+#-- Source packages: specify a fixed directory where all src packages will be placed
+#SRCPKGDEST=/home/srcpackages
 #-- Packager: name/email of the person or organization building packages
 #PACKAGER="John Doe <john@doe.com>"
 

etc/pacman.conf.in

@@ -17,8 +17,9 @@ HoldPkg     = pacman glibc
 # If upgrades are available for these packages they will be asked for first
 SyncFirst   = pacman
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
-#XferCommand = /usr/bin/curl %u > %o
+#XferCommand = /usr/bin/curl -C - -f %u > %o
 #CleanMethod = KeepInstalled
+Architecture = auto
 
 # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
 #IgnorePkg   =
@@ -28,11 +29,11 @@ SyncFirst   = pacman
 #NoExtract   =
 
 # Misc options (all disabled by default)
-#NoPassiveFtp
 #UseSyslog
 #ShowSize
 #UseDelta
 #TotalDownload
+#CheckSpace
 
 #
 # REPOSITORIES
@@ -42,6 +43,7 @@ SyncFirst   = pacman
 #   - repositories listed first will take precedence when packages
 #     have identical names, regardless of version number
 #   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
 #
 # Repository entries are of the format:
 #       [repo-name]
@@ -57,7 +59,7 @@ SyncFirst   = pacman
 # servers immediately after the header and they will be used before the
 # default mirrors.
 #[core]
-#Server = ftp://ftp.example.com/foobar/$repo/os/i686/
+#Server = ftp://ftp.example.com/foobar/$repo/os/$arch/
 # The file referenced here should contain a list of 'Server = ' lines.
 #Include = @sysconfdir@/pacman.d/mirrorlist
 

install-sh

@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2006-10-14.15
+scriptversion=2010-02-06.18; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -48,7 +48,7 @@ IFS=" ""	$nl"
 # set DOITPROG to echo to test this script
 
 # Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
+doit=${DOITPROG-}
 if test -z "$doit"; then
   doit_exec=exec
 else
@@ -58,34 +58,49 @@ fi
 # Put in absolute file names if you don't have them in your path;
 # or use environment vars.
 
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
 
-posix_glob=
 posix_mkdir=
 
 # Desired mode of installed file.
 mode=0755
 
+chgrpcmd=
 chmodcmd=$chmodprog
 chowncmd=
-chgrpcmd=
-stripcmd=
+mvcmd=$mvprog
 rmcmd="$rmprog -f"
-mvcmd="$mvprog"
+stripcmd=
+
 src=
 dst=
 dir_arg=
-dstarg=
+dst_arg=
+
+copy_on_change=false
 no_target_directory=
 
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
    or: $0 [OPTION]... SRCFILES... DIRECTORY
    or: $0 [OPTION]... -t DIRECTORY SRCFILES...
    or: $0 [OPTION]... -d DIRECTORIES...
@@ -95,65 +110,55 @@ In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
 In the 4th, create DIRECTORIES.
 
 Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
 
 Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
 "
 
 while test $# -ne 0; do
   case $1 in
-    -c) shift
-        continue;;
+    -c) ;;
 
-    -d) dir_arg=true
-        shift
-        continue;;
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
     --help) echo "$usage"; exit $?;;
 
     -m) mode=$2
-        shift
-        shift
 	case $mode in
 	  *' '* | *'	'* | *'
 '*	  | *'*'* | *'?'* | *'['*)
 	    echo "$0: invalid mode: $mode" >&2
 	    exit 1;;
 	esac
-        continue;;
+	shift;;
 
     -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
+	shift;;
 
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
+    -s) stripcmd=$stripprog;;
 
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
+    -t) dst_arg=$2
+	shift;;
 
-    -T) no_target_directory=true
-	shift
-	continue;;
+    -T) no_target_directory=true;;
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
@@ -165,21 +170,22 @@ while test $# -ne 0; do
 
     *)  break;;
   esac
+  shift
 done
 
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
   # When -d is used, all remaining arguments are directories to create.
   # When -t is used, the destination is already specified.
   # Otherwise, the last argument is the destination.  Remove it from $@.
   for arg
   do
-    if test -n "$dstarg"; then
+    if test -n "$dst_arg"; then
       # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dstarg"
+      set fnord "$@" "$dst_arg"
       shift # fnord
     fi
     shift # arg
-    dstarg=$arg
+    dst_arg=$arg
   done
 fi
 
@@ -194,7 +200,11 @@ if test $# -eq 0; then
 fi
 
 if test -z "$dir_arg"; then
-  trap '(exit $?); exit' 1 2 13 15
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
 
   # Set umask so as not to create temps with too-generous modes.
   # However, 'strip' requires both read and write access to temps.
@@ -224,7 +234,7 @@ for src
 do
   # Protect names starting with `-'.
   case $src in
-    -*) src=./$src ;;
+    -*) src=./$src;;
   esac
 
   if test -n "$dir_arg"; then
@@ -242,22 +252,22 @@ do
       exit 1
     fi
 
-    if test -z "$dstarg"; then
+    if test -z "$dst_arg"; then
       echo "$0: no destination specified." >&2
       exit 1
     fi
 
-    dst=$dstarg
+    dst=$dst_arg
     # Protect names starting with `-'.
     case $dst in
-      -*) dst=./$dst ;;
+      -*) dst=./$dst;;
     esac
 
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
       if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
+	echo "$0: $dst_arg: Is a directory" >&2
 	exit 1
       fi
       dstdir=$dst
@@ -378,26 +388,19 @@ do
       # directory the slow way, step by step, checking for races as we go.
 
       case $dstdir in
-	/*) prefix=/ ;;
-	-*) prefix=./ ;;
-	*)  prefix= ;;
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
       esac
 
-      case $posix_glob in
-        '')
-	  if (set -f) 2>/dev/null; then
-	    posix_glob=true
-	  else
-	    posix_glob=false
-	  fi ;;
-      esac
+      eval "$initialize_posix_glob"
 
       oIFS=$IFS
       IFS=/
-      $posix_glob && set -f
+      $posix_glob set -f
       set fnord $dstdir
       shift
-      $posix_glob && set +f
+      $posix_glob set +f
       IFS=$oIFS
 
       prefixes=
@@ -459,41 +462,54 @@ do
     # ignore errors from any of these, just make sure not to ignore
     # errors from the above "$doit $cpprog $src $dsttmp" command.
     #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
 
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
 
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dst"; then
-	       $doit $rmcmd -f "$dst" 2>/dev/null \
-	       || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
-		     && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
-	       || {
-		 echo "$0: cannot unlink or rename $dst" >&2
-		 (exit 1); exit 1
-	       }
-	     else
-	       :
-	     fi
-	   } &&
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
 
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dst"
-	 }
-    } || exit 1
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
 
     trap '' 0
   fi
@@ -503,5 +519,6 @@ done
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:

lib/libalpm/Makefile.am

@@ -25,25 +25,32 @@ libalpm_la_SOURCES = \
 	alpm.h alpm.c \
 	alpm_list.h alpm_list.c \
 	backup.h backup.c \
-	be_files.c \
+	be_local.c \
 	be_package.c \
-	cache.h cache.c \
+	be_sync.c \
 	conflict.h conflict.c \
 	db.h db.c \
 	delta.h delta.c \
 	deps.h deps.c \
+	diskspace.h diskspace.c \
 	dload.h dload.c \
 	error.c \
 	graph.h \
 	group.h group.c \
 	handle.h handle.c \
 	log.h log.c \
-	md5.h md5.c \
 	package.h package.c \
+	pkghash.h pkghash.c \
 	remove.h remove.c \
 	sync.h sync.c \
 	trans.h trans.c \
-	util.h util.c
+	util.h util.c \
+	version.c
+
+if !HAVE_LIBSSL
+libalpm_la_SOURCES += \
+	md5.h md5.c
+endif
 
 libalpm_la_LDFLAGS = -no-undefined -version-info $(LIB_VERSION_INFO)
 libalpm_la_LIBADD = $(LTLIBINTL)

lib/libalpm/add.c

@@ -1,7 +1,7 @@
 /*
  *  add.c
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -40,7 +40,6 @@
 #include "alpm_list.h"
 #include "trans.h"
 #include "util.h"
-#include "cache.h"
 #include "log.h"
 #include "backup.h"
 #include "package.h"
@@ -50,222 +49,91 @@
 #include "remove.h"
 #include "handle.h"
 
-int _alpm_add_loadtarget(pmtrans_t *trans, pmdb_t *db, char *name)
+/** Add a package to the transaction.
+ * @param pkg the package to add
+ * @return 0 on success, -1 on error (pm_errno is set accordingly)
+ */
+int SYMEXPORT alpm_add_pkg(pmpkg_t *pkg)
 {
-	pmpkg_t *pkg = NULL;
 	const char *pkgname, *pkgver;
-	alpm_list_t *i;
+	pmtrans_t *trans;
+	pmdb_t *db_local;
+	pmpkg_t *local;
 
 	ALPM_LOG_FUNC;
 
+	/* Sanity checks */
+	ASSERT(pkg != NULL, RET_ERR(PM_ERR_WRONG_ARGS, -1));
+	ASSERT(handle != NULL, RET_ERR(PM_ERR_HANDLE_NULL, -1));
+	trans = handle->trans;
 	ASSERT(trans != NULL, RET_ERR(PM_ERR_TRANS_NULL, -1));
-	ASSERT(db != NULL, RET_ERR(PM_ERR_DB_NULL, -1));
-	ASSERT(name != NULL && strlen(name) != 0, RET_ERR(PM_ERR_WRONG_ARGS, -1));
+	ASSERT(trans->state == STATE_INITIALIZED, RET_ERR(PM_ERR_TRANS_NOT_INITIALIZED, -1));
+	ASSERT(trans != NULL, RET_ERR(PM_ERR_TRANS_NULL, -1));
+	db_local = handle->db_local;
 
-	_alpm_log(PM_LOG_DEBUG, "loading target '%s'\n", name);
-
-	if(alpm_pkg_load(name, 1, &pkg) != 0) {
-		goto error;
-	}
 	pkgname = alpm_pkg_get_name(pkg);
 	pkgver = alpm_pkg_get_version(pkg);
 
-	/* check if an older version of said package is already in transaction
-	 * packages.  if so, replace it in the list */
-	for(i = trans->packages; i; i = i->next) {
-		pmpkg_t *transpkg = i->data;
-		if(strcmp(transpkg->name, pkgname) == 0) {
-			if(alpm_pkg_vercmp(transpkg->version, pkgver) < 0) {
-				_alpm_log(PM_LOG_WARNING, _("replacing older version %s-%s by %s in target list\n"),
-				          transpkg->name, transpkg->version, pkgver);
-				_alpm_pkg_free(i->data);
-				i->data = pkg;
+	_alpm_log(PM_LOG_DEBUG, "adding package '%s'\n", pkgname);
+
+	if(_alpm_pkg_find(trans->add, pkgname)) {
+		RET_ERR(PM_ERR_TRANS_DUP_TARGET, -1);
+	}
+
+	local = _alpm_db_get_pkgfromcache(db_local, pkgname);
+	if(local) {
+		const char *localpkgname = alpm_pkg_get_name(local);
+		const char *localpkgver = alpm_pkg_get_version(local);
+		int cmp = _alpm_pkg_compare_versions(pkg, local);
+
+		if(cmp == 0) {
+			if(trans->flags & PM_TRANS_FLAG_NEEDED) {
+				/* with the NEEDED flag, packages up to date are not reinstalled */
+				_alpm_log(PM_LOG_WARNING, _("%s-%s is up to date -- skipping\n"),
+						localpkgname, localpkgver);
+				return(0);
 			} else {
-				_alpm_log(PM_LOG_WARNING, _("skipping %s-%s because newer version %s is in the target list\n"),
-				          pkgname, pkgver, transpkg->version);
-				_alpm_pkg_free(pkg);
+				_alpm_log(PM_LOG_WARNING, _("%s-%s is up to date -- reinstalling\n"),
+						localpkgname, localpkgver);
 			}
-			return(0);
+		} else if(cmp < 0) {
+			/* local version is newer */
+			_alpm_log(PM_LOG_WARNING, _("downgrading package %s (%s => %s)\n"),
+					localpkgname, localpkgver, pkgver);
 		}
 	}
 
 	/* add the package to the transaction */
-	trans->packages = alpm_list_add(trans->packages, pkg);
+	pkg->reason = PM_PKG_REASON_EXPLICIT;
+	_alpm_log(PM_LOG_DEBUG, "adding package %s-%s to the transaction targets\n",
+						pkgname, pkgver);
+	trans->add = alpm_list_add(trans->add, pkg);
 
 	return(0);
-
-error:
-	_alpm_pkg_free(pkg);
-	return(-1);
 }
 
-int _alpm_add_prepare(pmtrans_t *trans, pmdb_t *db, alpm_list_t **data)
+static int perform_extraction(struct archive *archive,
+		struct archive_entry *entry, const char *filename, const char *origname)
 {
-	alpm_list_t *lp = NULL;
+	int ret;
+	const int archive_flags = ARCHIVE_EXTRACT_OWNER |
+	                          ARCHIVE_EXTRACT_PERM |
+	                          ARCHIVE_EXTRACT_TIME;
 
-	ALPM_LOG_FUNC;
+	archive_entry_set_pathname(entry, filename);
 
-	ASSERT(trans != NULL, RET_ERR(PM_ERR_TRANS_NULL, -1));
-	ASSERT(db != NULL, RET_ERR(PM_ERR_DB_NULL, -1));
-
-	/* Check dependencies
-	 */
-	if(!(trans->flags & PM_TRANS_FLAG_NODEPS)) {
-		EVENT(trans, PM_TRANS_EVT_CHECKDEPS_START, NULL, NULL);
-
-		/* look for unsatisfied dependencies */
-		_alpm_log(PM_LOG_DEBUG, "looking for unsatisfied dependencies\n");
-		lp = alpm_checkdeps(_alpm_db_get_pkgcache(db), 1, NULL, trans->packages);
-		if(lp != NULL) {
-			if(data) {
-				*data = lp;
-			} else {
-				alpm_list_free_inner(lp, (alpm_list_fn_free)_alpm_depmiss_free);
-				alpm_list_free(lp);
-			}
-			RET_ERR(PM_ERR_UNSATISFIED_DEPS, -1);
-		}
-
-		/* no unsatisfied deps, so look for conflicts */
-		_alpm_log(PM_LOG_DEBUG, "looking for conflicts\n");
-		alpm_list_t *inner = _alpm_innerconflicts(trans->packages);
-		alpm_list_t *outer = _alpm_outerconflicts(db, trans->packages);
-		lp = alpm_list_join(inner, outer);
-
-		/* TODO : factorize the conflict resolving code from sync.c to use it here (FS#3492) */
-
-		if(lp != NULL) {
-			if(data) {
-				*data = lp;
-			} else {
-				alpm_list_free_inner(lp, (alpm_list_fn_free)_alpm_conflict_free);
-				alpm_list_free(lp);
-			}
-			if(inner) {
-				_alpm_log(PM_LOG_ERROR, _("conflicting packages were found in the target list\n"));
-				_alpm_log(PM_LOG_ERROR, _("you cannot install two conflicting packages at the same time\n"));
-			}
-			if(outer) {
-				_alpm_log(PM_LOG_ERROR, _("replacing packages with -U is not supported yet\n"));
-				_alpm_log(PM_LOG_ERROR, _("you can replace packages manually using -Rd and -U\n"));
-			}
-			RET_ERR(PM_ERR_CONFLICTING_DEPS, -1);
-		}
-
-		/* re-order w.r.t. dependencies */
-		_alpm_log(PM_LOG_DEBUG, "sorting by dependencies\n");
-		lp = _alpm_sortbydeps(trans->packages, 0);
-		/* free the old alltargs */
-		alpm_list_free(trans->packages);
-		trans->packages = lp;
-
-		EVENT(trans, PM_TRANS_EVT_CHECKDEPS_DONE, NULL, NULL);
+	ret = archive_read_extract(archive, entry, archive_flags);
+	if(ret == ARCHIVE_WARN && archive_errno(archive) != ENOSPC) {
+		/* operation succeeded but a "non-critical" error was encountered */
+		_alpm_log(PM_LOG_WARNING, _("warning given when extracting %s (%s)\n"),
+				origname, archive_error_string(archive));
+	} else if(ret != ARCHIVE_OK) {
+		_alpm_log(PM_LOG_ERROR, _("could not extract %s (%s)\n"),
+				origname, archive_error_string(archive));
+		alpm_logaction("error: could not extract %s (%s)\n",
+				origname, archive_error_string(archive));
+		return(1);
 	}
-
-	/* Check for file conflicts */
-	if(!(trans->flags & PM_TRANS_FLAG_FORCE)) {
-		EVENT(trans, PM_TRANS_EVT_FILECONFLICTS_START, NULL, NULL);
-
-		_alpm_log(PM_LOG_DEBUG, "looking for file conflicts\n");
-		lp = _alpm_db_find_fileconflicts(db, trans, trans->packages, NULL);
-		if(lp != NULL) {
-			if(data) {
-				*data = lp;
-			} else {
-				alpm_list_free_inner(lp, (alpm_list_fn_free)_alpm_fileconflict_free);
-				alpm_list_free(lp);
-			}
-			RET_ERR(PM_ERR_FILE_CONFLICTS, -1);
-		}
-
-		EVENT(trans, PM_TRANS_EVT_FILECONFLICTS_DONE, NULL, NULL);
-	}
-
-	return(0);
-}
-
-static int upgrade_remove(pmpkg_t *oldpkg, pmpkg_t *newpkg, pmtrans_t *trans, pmdb_t *db) {
-	/* this is kinda odd.  If the old package exists, at this point we make a
-	 * NEW transaction, unrelated to handle->trans, and instantiate a "remove"
-	 * with the type PM_TRANS_TYPE_REMOVEUPGRADE. TODO: kill this weird
-	 * behavior. */
-	pmtrans_t *tr = _alpm_trans_new();
-
-	ALPM_LOG_FUNC;
-
-	_alpm_log(PM_LOG_DEBUG, "removing old package first (%s-%s)\n",
-			oldpkg->name, oldpkg->version);
-
-	if(!tr) {
-		RET_ERR(PM_ERR_TRANS_ABORT, -1);
-	}
-
-	if(_alpm_trans_init(tr, PM_TRANS_TYPE_REMOVEUPGRADE, trans->flags,
-				NULL, NULL, NULL) == -1) {
-		_alpm_trans_free(tr);
-		tr = NULL;
-		RET_ERR(PM_ERR_TRANS_ABORT, -1);
-	}
-
-	if(_alpm_remove_loadtarget(tr, db, newpkg->name) == -1) {
-		_alpm_trans_free(tr);
-		tr = NULL;
-		RET_ERR(PM_ERR_TRANS_ABORT, -1);
-	}
-
-	/* copy the remove skiplist over */
-	tr->skip_remove = alpm_list_strdup(trans->skip_remove);
-	const alpm_list_t *b;
-
-	/* Add files in the NEW backup array to the NoUpgrade array
-	 * so this removal operation doesn't kill them */
-	alpm_list_t *old_noupgrade = alpm_list_strdup(handle->noupgrade);
-	/* old package backup list */
-	alpm_list_t *filelist = alpm_pkg_get_files(newpkg);
-	for(b = alpm_pkg_get_backup(newpkg); b; b = b->next) {
-		char *backup = _alpm_backup_file(b->data);
-		/* safety check (fix the upgrade026 pactest) */
-		if(!alpm_list_find_str(filelist, backup)) {
-			FREE(backup);
-			continue;
-		}
-		_alpm_log(PM_LOG_DEBUG, "adding %s to the NoUpgrade array temporarily\n",
-				backup);
-		handle->noupgrade = alpm_list_add(handle->noupgrade,
-				backup);
-	}
-
-	/* TODO: we could also add files in the OLD backup array, but this would
-	 * change the backup handling behavior, and break several pactests, and we
-	 * can't do this just before 3.1 release.
-	 * The unlink_file function in remove.c would also need to be reviewed. */
-#if 0
-	/* new package backup list */
-	for(b = alpm_pkg_get_backup(oldpkg); b; b = b->next) {
-		char *backup = _alpm_backup_file(b->data);
-		/* make sure we don't add duplicate entries */
-		if(!alpm_list_find_ptr(handle->noupgrade, backup)) {
-			_alpm_log(PM_LOG_DEBUG, "adding %s to the NoUpgrade array temporarily\n",
-					backup);
-			handle->noupgrade = alpm_list_add(handle->noupgrade,
-					backup);
-		}
-	}
-#endif
-
-	int ret = _alpm_remove_commit(tr, db);
-
-	_alpm_trans_free(tr);
-	tr = NULL;
-
-	/* restore our "NoUpgrade" list to previous state */
-	FREELIST(handle->noupgrade);
-	handle->noupgrade = old_noupgrade;
-
-	if(ret == -1) {
-		RET_ERR(PM_ERR_TRANS_ABORT, -1);
-	}
-
 	return(0);
 }
 
@@ -279,9 +147,6 @@ static int extract_single_file(struct archive *archive,
 	int needbackup = 0, notouch = 0;
 	char *hash_orig = NULL;
 	char *entryname_orig = NULL;
-	const int archive_flags = ARCHIVE_EXTRACT_OWNER |
-	                          ARCHIVE_EXTRACT_PERM |
-	                          ARCHIVE_EXTRACT_TIME;
 	int errors = 0;
 
 	entryname = archive_entry_pathname(entry);
@@ -291,13 +156,13 @@ static int extract_single_file(struct archive *archive,
 
 	if(strcmp(entryname, ".INSTALL") == 0) {
 		/* the install script goes inside the db */
-		snprintf(filename, PATH_MAX, "%s%s-%s/install", db->path,
-				newpkg->name, newpkg->version);
+		snprintf(filename, PATH_MAX, "%s%s-%s/install",
+				_alpm_db_path(db), newpkg->name, newpkg->version);
 		archive_entry_set_perm(entry, 0644);
 	} else if(strcmp(entryname, ".CHANGELOG") == 0) {
 		/* the changelog goes inside the db */
-		snprintf(filename, PATH_MAX, "%s%s-%s/changelog", db->path,
-				newpkg->name, newpkg->version);
+		snprintf(filename, PATH_MAX, "%s%s-%s/changelog",
+				_alpm_db_path(db), newpkg->name, newpkg->version);
 		archive_entry_set_perm(entry, 0644);
 	} else if(*entryname == '.') {
 		/* for now, ignore all files starting with '.' that haven't
@@ -320,14 +185,6 @@ static int extract_single_file(struct archive *archive,
 		return(0);
 	}
 
-	/* if a file is in the add skiplist we never extract it */
-	if(alpm_list_find_str(trans->skip_add, filename)) {
-		_alpm_log(PM_LOG_DEBUG, "%s is in trans->skip_add, skipping extraction\n",
-				entryname);
-		archive_read_data_skip(archive);
-		return(0);
-	}
-
 	/* Check for file existence. This is one of the more crucial parts
 	 * to get 'right'. Here are the possibilities, with the filesystem
 	 * on the left and the package on the top:
@@ -358,7 +215,7 @@ static int extract_single_file(struct archive *archive,
 				/* case 12: existing dir, ignore it */
 				if(lsbuf.st_mode != entrymode) {
 					/* if filesystem perms are different than pkg perms, warn user */
-					int mask = 07777;
+					mode_t mask = 07777;
 					_alpm_log(PM_LOG_WARNING, _("directory permissions differ on %s\n"
 								"filesystem: %o  package: %o\n"), entryname, lsbuf.st_mode & mask,
 							entrymode & mask);
@@ -436,18 +293,10 @@ static int extract_single_file(struct archive *archive,
 		int ret;
 
 		snprintf(checkfile, PATH_MAX, "%s.paccheck", filename);
-		archive_entry_set_pathname(entry, checkfile);
 
-		ret = archive_read_extract(archive, entry, archive_flags);
-		if(ret == ARCHIVE_WARN) {
-			/* operation succeeded but a non-critical error was encountered */
-			_alpm_log(PM_LOG_DEBUG, "warning extracting %s (%s)\n",
-					entryname_orig, archive_error_string(archive));
-		} else if(ret != ARCHIVE_OK) {
-			_alpm_log(PM_LOG_ERROR, _("could not extract %s (%s)\n"),
-					entryname_orig, archive_error_string(archive));
-			alpm_logaction("error: could not extract %s (%s)\n",
-					entryname_orig, archive_error_string(archive));
+		ret = perform_extraction(archive, entry, checkfile, entryname_orig);
+		if(ret == 1) {
+			/* error */
 			FREE(hash_orig);
 			FREE(entryname_orig);
 			return(1);
@@ -589,18 +438,9 @@ static int extract_single_file(struct archive *archive,
 			unlink(filename);
 		}
 
-		archive_entry_set_pathname(entry, filename);
-
-		ret = archive_read_extract(archive, entry, archive_flags);
-		if(ret == ARCHIVE_WARN) {
-			/* operation succeeded but a non-critical error was encountered */
-			_alpm_log(PM_LOG_DEBUG, "warning extracting %s (%s)\n",
-					entryname_orig, archive_error_string(archive));
-		} else if(ret != ARCHIVE_OK) {
-			_alpm_log(PM_LOG_ERROR, _("could not extract %s (%s)\n"),
-					entryname_orig, archive_error_string(archive));
-			alpm_logaction("error: could not extract %s (%s)\n",
-					entryname_orig, archive_error_string(archive));
+		ret = perform_extraction(archive, entry, filename, entryname_orig);
+		if(ret == 1) {
+			/* error */
 			FREE(entryname_orig);
 			return(1);
 		}
@@ -632,8 +472,8 @@ static int extract_single_file(struct archive *archive,
 	return(errors);
 }
 
-static int commit_single_pkg(pmpkg_t *newpkg, int pkg_current, int pkg_count,
-		pmtrans_t *trans, pmdb_t *db)
+static int commit_single_pkg(pmpkg_t *newpkg, size_t pkg_current,
+		size_t pkg_count, pmtrans_t *trans, pmdb_t *db)
 {
 	int i, ret = 0, errors = 0;
 	char scriptlet[PATH_MAX+1];
@@ -642,8 +482,11 @@ static int commit_single_pkg(pmpkg_t *newpkg, int pkg_current, int pkg_count,
 
 	ALPM_LOG_FUNC;
 
-	snprintf(scriptlet, PATH_MAX, "%s%s-%s/install", db->path,
-			alpm_pkg_get_name(newpkg), alpm_pkg_get_version(newpkg));
+	ASSERT(trans != NULL, RET_ERR(PM_ERR_TRANS_NULL, -1));
+
+	snprintf(scriptlet, PATH_MAX, "%s%s-%s/install",
+			_alpm_db_path(db), alpm_pkg_get_name(newpkg),
+			alpm_pkg_get_version(newpkg));
 
 	/* see if this is an upgrade. if so, remove the old package first */
 	pmpkg_t *local = _alpm_db_get_pkgfromcache(db, newpkg->name);
@@ -654,7 +497,7 @@ static int commit_single_pkg(pmpkg_t *newpkg, int pkg_current, int pkg_count,
 		oldpkg = _alpm_pkg_dup(local);
 		/* make sure all infos are loaded because the database entry
 		 * will be removed soon */
-		_alpm_db_read(oldpkg->origin_data.db, oldpkg, INFRQ_ALL);
+		_alpm_local_db_read(oldpkg->origin_data.db, oldpkg, INFRQ_ALL);
 
 		EVENT(trans, PM_TRANS_EVT_UPGRADE_START, newpkg, oldpkg);
 		_alpm_log(PM_LOG_DEBUG, "upgrading package %s-%s\n",
@@ -691,15 +534,16 @@ static int commit_single_pkg(pmpkg_t *newpkg, int pkg_current, int pkg_count,
 
 	if(oldpkg) {
 		/* set up fake remove transaction */
-		int ret = upgrade_remove(oldpkg, newpkg, trans, db);
-		if(ret != 0) {
+		if(_alpm_upgraderemove_package(oldpkg, newpkg, trans) == -1) {
+			pm_errno = PM_ERR_TRANS_ABORT;
+			ret = -1;
 			goto cleanup;
 		}
 	}
 
 	/* prepare directory for database entries so permission are correct after
 	   changelog/install script installation (FS#12263) */
-	if(_alpm_db_prepare(db, newpkg)) {
+	if(_alpm_local_db_prepare(db, newpkg)) {
 		alpm_logaction("error: could not create database entry %s-%s\n",
 				alpm_pkg_get_name(newpkg), alpm_pkg_get_version(newpkg));
 		pm_errno = PM_ERR_DB_WRITE;
@@ -711,6 +555,7 @@ static int commit_single_pkg(pmpkg_t *newpkg, int pkg_current, int pkg_count,
 		struct archive *archive;
 		struct archive_entry *entry;
 		char cwd[PATH_MAX] = "";
+		int restore_cwd = 0;
 
 		_alpm_log(PM_LOG_DEBUG, "extracting files\n");
 
@@ -734,11 +579,16 @@ static int commit_single_pkg(pmpkg_t *newpkg, int pkg_current, int pkg_count,
 		/* save the cwd so we can restore it later */
 		if(getcwd(cwd, PATH_MAX) == NULL) {
 			_alpm_log(PM_LOG_ERROR, _("could not get current working directory\n"));
-			cwd[0] = 0;
+		} else {
+			restore_cwd = 1;
 		}
 
 		/* libarchive requires this for extracting hard links */
-		chdir(handle->root);
+		if(chdir(handle->root) != 0) {
+			_alpm_log(PM_LOG_ERROR, _("could not change directory to %s (%s)\n"), handle->root, strerror(errno));
+			ret = -1;
+			goto cleanup;
+		}
 
 		/* call PROGRESS once with 0 percent, as we sort-of skip that here */
 		if(is_upgrade) {
@@ -750,31 +600,31 @@ static int commit_single_pkg(pmpkg_t *newpkg, int pkg_current, int pkg_count,
 		}
 
 		for(i = 0; archive_read_next_header(archive, &entry) == ARCHIVE_OK; i++) {
-			double percent;
+			int percent;
 
 			if(newpkg->size != 0) {
 				/* Using compressed size for calculations here, as newpkg->isize is not
 				 * exact when it comes to comparing to the ACTUAL uncompressed size
 				 * (missing metadata sizes) */
 				int64_t pos = archive_position_compressed(archive);
-				percent = (double)pos / (double)newpkg->size;
+				percent = (pos * 100) / newpkg->size;
 				_alpm_log(PM_LOG_DEBUG, "decompression progress: "
-						"%f%% (%"PRId64" / %jd)\n",
-						percent*100.0, pos, (intmax_t)newpkg->size);
-				if(percent >= 1.0) {
-					percent = 1.0;
+						"%d%% (%"PRId64" / %jd)\n",
+						percent, pos, (intmax_t)newpkg->size);
+				if(percent >= 100) {
+					percent = 100;
 				}
 			} else {
-				percent = 0.0;
+				percent = 0;
 			}
 
 			if(is_upgrade) {
 				PROGRESS(trans, PM_TRANS_PROGRESS_UPGRADE_START,
-						alpm_pkg_get_name(newpkg), (int)(percent * 100), pkg_count,
+						alpm_pkg_get_name(newpkg), percent, pkg_count,
 						pkg_current);
 			} else {
 				PROGRESS(trans, PM_TRANS_PROGRESS_ADD_START,
-						alpm_pkg_get_name(newpkg), (int)(percent * 100), pkg_count,
+						alpm_pkg_get_name(newpkg), percent, pkg_count,
 						pkg_current);
 			}
 
@@ -784,9 +634,9 @@ static int commit_single_pkg(pmpkg_t *newpkg, int pkg_current, int pkg_count,
 		}
 		archive_read_finish(archive);
 
-		/* restore the old cwd is we have it */
-		if(strlen(cwd)) {
-			chdir(cwd);
+		/* restore the old cwd if we have it */
+		if(restore_cwd && chdir(cwd) != 0) {
+			_alpm_log(PM_LOG_ERROR, _("could not change directory to %s (%s)\n"), cwd, strerror(errno));
 		}
 
 		if(errors) {
@@ -811,7 +661,7 @@ static int commit_single_pkg(pmpkg_t *newpkg, int pkg_current, int pkg_count,
 	_alpm_log(PM_LOG_DEBUG, "updating database\n");
 	_alpm_log(PM_LOG_DEBUG, "adding database entry '%s'\n", newpkg->name);
 
-	if(_alpm_db_write(db, newpkg, INFRQ_ALL)) {
+	if(_alpm_local_db_write(db, newpkg, INFRQ_ALL)) {
 		_alpm_log(PM_LOG_ERROR, _("could not update database entry %s-%s\n"),
 				alpm_pkg_get_name(newpkg), alpm_pkg_get_version(newpkg));
 		alpm_logaction("error: could not update database entry %s-%s\n",
@@ -858,9 +708,10 @@ cleanup:
 	return(ret);
 }
 
-int _alpm_add_commit(pmtrans_t *trans, pmdb_t *db)
+int _alpm_upgrade_packages(pmtrans_t *trans, pmdb_t *db)
 {
-	int pkg_count, pkg_current;
+	size_t pkg_count, pkg_current;
+	int skip_ldconfig = 0, ret = 0;
 	alpm_list_t *targ;
 
 	ALPM_LOG_FUNC;
@@ -868,28 +719,38 @@ int _alpm_add_commit(pmtrans_t *trans, pmdb_t *db)
 	ASSERT(trans != NULL, RET_ERR(PM_ERR_TRANS_NULL, -1));
 	ASSERT(db != NULL, RET_ERR(PM_ERR_DB_NULL, -1));
 
-	if(trans->packages == NULL) {
+	if(trans->add == NULL) {
 		return(0);
 	}
 
-	pkg_count = alpm_list_count(trans->packages);
+	pkg_count = alpm_list_count(trans->add);
 	pkg_current = 1;
 
 	/* loop through our package list adding/upgrading one at a time */
-	for(targ = trans->packages; targ; targ = targ->next) {
+	for(targ = trans->add; targ; targ = targ->next) {
 		if(handle->trans->state == STATE_INTERRUPTED) {
-			return(0);
+			return(ret);
 		}
 
 		pmpkg_t *newpkg = (pmpkg_t *)targ->data;
-		commit_single_pkg(newpkg, pkg_current, pkg_count, trans, db);
+		if(commit_single_pkg(newpkg, pkg_current, pkg_count, trans, db)) {
+			/* something screwed up on the commit, abort the trans */
+			trans->state = STATE_INTERRUPTED;
+			pm_errno = PM_ERR_TRANS_ABORT;
+			/* running ldconfig at this point could possibly screw system */
+			skip_ldconfig = 1;
+			ret = -1;
+		}
+
 		pkg_current++;
 	}
 
-	/* run ldconfig if it exists */
-	_alpm_ldconfig(handle->root);
+	if(!skip_ldconfig) {
+		/* run ldconfig if it exists */
+		_alpm_ldconfig(handle->root);
+	}
 
-	return(0);
+	return(ret);
 }
 
 /* vim: set ts=2 sw=2 noet: */

lib/libalpm/add.h

@@ -1,7 +1,7 @@
 /*
  *  add.h
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -24,9 +24,7 @@
 #include "alpm_list.h"
 #include "trans.h"
 
-int _alpm_add_loadtarget(pmtrans_t *trans, pmdb_t *db, char *name);
-int _alpm_add_prepare(pmtrans_t *trans, pmdb_t *db, alpm_list_t **data);
-int _alpm_add_commit(pmtrans_t *trans, pmdb_t *db);
+int _alpm_upgrade_packages(pmtrans_t *trans, pmdb_t *db);
 
 #endif /* _ALPM_ADD_H */
 

lib/libalpm/alpm.c

@@ -1,7 +1,7 @@
 /*
  *  alpm.c
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *  Copyright (c) 2005 by Aurelien Foret <orelien@chez.com>
  *  Copyright (c) 2005 by Christian Hamar <krics@linuxforum.hu>
@@ -23,6 +23,11 @@
 
 #include "config.h"
 
+/* connection caching setup */
+#ifdef HAVE_LIBFETCH
+#include <fetch.h>
+#endif
+
 /* libalpm */
 #include "alpm.h"
 #include "alpm_list.h"
@@ -49,11 +54,21 @@ int SYMEXPORT alpm_initialize(void)
 	if(handle == NULL) {
 		RET_ERR(PM_ERR_MEMORY, -1);
 	}
+	if(_alpm_db_register_local() == NULL) {
+		/* error code should be set */
+		_alpm_handle_free(handle);
+		handle = NULL;
+		return(-1);
+	}
 
 #ifdef ENABLE_NLS
 	bindtextdomain("libalpm", LOCALEDIR);
 #endif
 
+#ifdef HAVE_LIBFETCH
+	fetchConnectionCacheInit(5, 1);
+#endif
+
 	return(0);
 }
 
@@ -71,6 +86,11 @@ int SYMEXPORT alpm_release(void)
 	}
 
 	_alpm_handle_free(handle);
+	handle = NULL;
+
+#ifdef HAVE_LIBFETCH
+	fetchConnectionCacheClose();
+#endif
 
 	return(0);
 }

lib/libalpm/alpm.h

@@ -1,7 +1,7 @@
 /*
  * alpm.h
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *  Copyright (c) 2005 by Aurelien Foret <orelien@chez.com>
  *  Copyright (c) 2005 by Christian Hamar <krics@linuxforum.hu>
@@ -67,14 +67,14 @@ const char *alpm_version(void);
 
 /* Levels */
 typedef enum _pmloglevel_t {
-	PM_LOG_ERROR    = 0x01,
-	PM_LOG_WARNING  = 0x02,
-	PM_LOG_DEBUG    = 0x04,
-	PM_LOG_FUNCTION = 0x08
+	PM_LOG_ERROR    = 1,
+	PM_LOG_WARNING  = (1 << 1),
+	PM_LOG_DEBUG    = (1 << 2),
+	PM_LOG_FUNCTION = (1 << 3)
 } pmloglevel_t;
 
-typedef void (*alpm_cb_log)(pmloglevel_t, char *, va_list);
-int alpm_logaction(char *fmt, ...);
+typedef void (*alpm_cb_log)(pmloglevel_t, const char *, va_list);
+int alpm_logaction(const char *fmt, ...);
 
 /*
  * Downloading
@@ -86,84 +86,94 @@ typedef void (*alpm_cb_totaldl)(off_t total);
 /** A callback for downloading files
  * @param url the URL of the file to be downloaded
  * @param localpath the directory to which the file should be downloaded
- * @param mtimeold the modification time of the file previously downloaded
- * @param mtimenew the modification time of the newly downloaded file.
- * This should be set by the callback.
- * @return 0 on success, 1 if the modification times are identical, -1 on
+ * @param force whether to force an update, even if the file is the same
+ * @return 0 on success, 1 if the file exists and is identical, -1 on
  * error.
  */
 typedef int (*alpm_cb_fetch)(const char *url, const char *localpath,
-		time_t mtimeold, time_t *mtimenew);
+		int force);
 
 /*
  * Options
  */
 
-alpm_cb_log alpm_option_get_logcb();
+alpm_cb_log alpm_option_get_logcb(void);
 void alpm_option_set_logcb(alpm_cb_log cb);
 
-alpm_cb_download alpm_option_get_dlcb();
+alpm_cb_download alpm_option_get_dlcb(void);
 void alpm_option_set_dlcb(alpm_cb_download cb);
 
-alpm_cb_fetch alpm_option_get_fetchcb();
+alpm_cb_fetch alpm_option_get_fetchcb(void);
 void alpm_option_set_fetchcb(alpm_cb_fetch cb);
 
-alpm_cb_totaldl alpm_option_get_totaldlcb();
+alpm_cb_totaldl alpm_option_get_totaldlcb(void);
 void alpm_option_set_totaldlcb(alpm_cb_totaldl cb);
 
-const char *alpm_option_get_root();
+const char *alpm_option_get_root(void);
 int alpm_option_set_root(const char *root);
 
-const char *alpm_option_get_dbpath();
+const char *alpm_option_get_dbpath(void);
 int alpm_option_set_dbpath(const char *dbpath);
 
-alpm_list_t *alpm_option_get_cachedirs();
+alpm_list_t *alpm_option_get_cachedirs(void);
 int alpm_option_add_cachedir(const char *cachedir);
 void alpm_option_set_cachedirs(alpm_list_t *cachedirs);
 int alpm_option_remove_cachedir(const char *cachedir);
 
-const char *alpm_option_get_logfile();
+const char *alpm_option_get_logfile(void);
 int alpm_option_set_logfile(const char *logfile);
 
-const char *alpm_option_get_lockfile();
+const char *alpm_option_get_lockfile(void);
 /* no set_lockfile, path is determined from dbpath */
 
-unsigned short alpm_option_get_usesyslog();
-void alpm_option_set_usesyslog(unsigned short usesyslog);
+int alpm_option_get_usesyslog(void);
+void alpm_option_set_usesyslog(int usesyslog);
 
-alpm_list_t *alpm_option_get_noupgrades();
+alpm_list_t *alpm_option_get_noupgrades(void);
 void alpm_option_add_noupgrade(const char *pkg);
 void alpm_option_set_noupgrades(alpm_list_t *noupgrade);
 int alpm_option_remove_noupgrade(const char *pkg);
 
-alpm_list_t *alpm_option_get_noextracts();
+alpm_list_t *alpm_option_get_noextracts(void);
 void alpm_option_add_noextract(const char *pkg);
 void alpm_option_set_noextracts(alpm_list_t *noextract);
 int alpm_option_remove_noextract(const char *pkg);
 
-alpm_list_t *alpm_option_get_ignorepkgs();
+alpm_list_t *alpm_option_get_ignorepkgs(void);
 void alpm_option_add_ignorepkg(const char *pkg);
 void alpm_option_set_ignorepkgs(alpm_list_t *ignorepkgs);
 int alpm_option_remove_ignorepkg(const char *pkg);
 
-alpm_list_t *alpm_option_get_ignoregrps();
+alpm_list_t *alpm_option_get_ignoregrps(void);
 void alpm_option_add_ignoregrp(const char *grp);
 void alpm_option_set_ignoregrps(alpm_list_t *ignoregrps);
 int alpm_option_remove_ignoregrp(const char *grp);
 
-unsigned short alpm_option_get_nopassiveftp();
-void alpm_option_set_nopassiveftp(unsigned short nopasv);
-void alpm_option_set_usedelta(unsigned short usedelta);
+const char *alpm_option_get_arch(void);
+void alpm_option_set_arch(const char *arch);
 
-pmdb_t *alpm_option_get_localdb();
-alpm_list_t *alpm_option_get_syncdbs();
+int alpm_option_get_usedelta(void);
+void alpm_option_set_usedelta(int usedelta);
+
+int alpm_option_get_checkspace(void);
+void alpm_option_set_checkspace(int checkspace);
+
+pmdb_t *alpm_option_get_localdb(void);
+alpm_list_t *alpm_option_get_syncdbs(void);
+
+/*
+ * Install reasons -- ie, why the package was installed
+ */
+
+typedef enum _pmpkgreason_t {
+	PM_PKG_REASON_EXPLICIT = 0,  /* explicitly requested by the user */
+	PM_PKG_REASON_DEPEND = 1  /* installed as a dependency for another package */
+} pmpkgreason_t;
 
 /*
  * Databases
  */
 
-/* Preferred interfaces db_register_local and db_register_sync */
-pmdb_t *alpm_db_register_local(void);
 pmdb_t *alpm_db_register_sync(const char *treename);
 int alpm_db_unregister(pmdb_t *db);
 int alpm_db_unregister_all(void);
@@ -181,6 +191,7 @@ alpm_list_t *alpm_db_get_pkgcache(pmdb_t *db);
 pmgrp_t *alpm_db_readgrp(pmdb_t *db, const char *name);
 alpm_list_t *alpm_db_get_grpcache(pmdb_t *db);
 alpm_list_t *alpm_db_search(pmdb_t *db, const alpm_list_t* needles);
+int alpm_db_set_pkgreason(pmdb_t *db, const char *name, pmpkgreason_t reason);
 
 /*
  * Packages
@@ -188,13 +199,7 @@ alpm_list_t *alpm_db_search(pmdb_t *db, const alpm_list_t* needles);
 
 /* Info parameters */
 
-/* reasons -- ie, why the package was installed */
-typedef enum _pmpkgreason_t {
-	PM_PKG_REASON_EXPLICIT = 0,  /* explicitly requested by the user */
-	PM_PKG_REASON_DEPEND = 1  /* installed as a dependency for another package */
-} pmpkgreason_t;
-
-int alpm_pkg_load(const char *filename, unsigned short full, pmpkg_t **pkg);
+int alpm_pkg_load(const char *filename, int full, pmpkg_t **pkg);
 int alpm_pkg_free(pmpkg_t *pkg);
 int alpm_pkg_checkmd5sum(pmpkg_t *pkg);
 char *alpm_fetch_pkgurl(const char *url);
@@ -224,17 +229,16 @@ alpm_list_t *alpm_pkg_get_deltas(pmpkg_t *pkg);
 alpm_list_t *alpm_pkg_get_replaces(pmpkg_t *pkg);
 alpm_list_t *alpm_pkg_get_files(pmpkg_t *pkg);
 alpm_list_t *alpm_pkg_get_backup(pmpkg_t *pkg);
-alpm_list_t *alpm_pkg_get_removes(pmpkg_t *pkg);
 pmdb_t *alpm_pkg_get_db(pmpkg_t *pkg);
 void *alpm_pkg_changelog_open(pmpkg_t *pkg);
 size_t alpm_pkg_changelog_read(void *ptr, size_t size,
 		const pmpkg_t *pkg, const void *fp);
 /*int alpm_pkg_changelog_feof(const pmpkg_t *pkg, void *fp);*/
 int alpm_pkg_changelog_close(const pmpkg_t *pkg, void *fp);
-unsigned short alpm_pkg_has_scriptlet(pmpkg_t *pkg);
-unsigned short alpm_pkg_has_force(pmpkg_t *pkg);
+int alpm_pkg_has_scriptlet(pmpkg_t *pkg);
 
 off_t alpm_pkg_download_size(pmpkg_t *newpkg);
+alpm_list_t *alpm_pkg_unused_deltas(pmpkg_t *pkg);
 
 /*
  * Deltas
@@ -251,6 +255,7 @@ off_t alpm_delta_get_size(pmdelta_t *delta);
  */
 const char *alpm_grp_get_name(const pmgrp_t *grp);
 alpm_list_t *alpm_grp_get_pkgs(const pmgrp_t *grp);
+alpm_list_t *alpm_find_grp_pkgs(alpm_list_t *dbs, const char *name);
 
 /*
  * Sync
@@ -262,34 +267,27 @@ pmpkg_t *alpm_sync_newversion(pmpkg_t *pkg, alpm_list_t *dbs_sync);
  * Transactions
  */
 
-/* Types */
-typedef enum _pmtranstype_t {
-	PM_TRANS_TYPE_UPGRADE = 1,
-	PM_TRANS_TYPE_REMOVE,
-	PM_TRANS_TYPE_REMOVEUPGRADE,
-	PM_TRANS_TYPE_SYNC
-} pmtranstype_t;
 
 /* Flags */
 typedef enum _pmtransflag_t {
-	PM_TRANS_FLAG_NODEPS = 0x01,
-	PM_TRANS_FLAG_FORCE = 0x02,
-	PM_TRANS_FLAG_NOSAVE = 0x04,
-	/* 0x08 flag can go here */
-	PM_TRANS_FLAG_CASCADE = 0x10,
-	PM_TRANS_FLAG_RECURSE = 0x20,
-	PM_TRANS_FLAG_DBONLY = 0x40,
-	/* 0x80 flag can go here */
-	PM_TRANS_FLAG_ALLDEPS = 0x100,
-	PM_TRANS_FLAG_DOWNLOADONLY = 0x200,
-	PM_TRANS_FLAG_NOSCRIPTLET = 0x400,
-	PM_TRANS_FLAG_NOCONFLICTS = 0x800,
-	/* 0x1000 flag can go here */
-	PM_TRANS_FLAG_NEEDED = 0x2000,
-	PM_TRANS_FLAG_ALLEXPLICIT = 0x4000,
-	PM_TRANS_FLAG_UNNEEDED = 0x8000,
-	PM_TRANS_FLAG_RECURSEALL = 0x10000,
-	PM_TRANS_FLAG_NOLOCK = 0x20000
+	PM_TRANS_FLAG_NODEPS = 1,
+	PM_TRANS_FLAG_FORCE = (1 << 1),
+	PM_TRANS_FLAG_NOSAVE = (1 << 2),
+	PM_TRANS_FLAG_NODEPVERSION = (1 << 3),
+	PM_TRANS_FLAG_CASCADE = (1 << 4),
+	PM_TRANS_FLAG_RECURSE = (1 << 5),
+	PM_TRANS_FLAG_DBONLY = (1 << 6),
+	/* (1 << 7) flag can go here */
+	PM_TRANS_FLAG_ALLDEPS = (1 << 8),
+	PM_TRANS_FLAG_DOWNLOADONLY = (1 << 9),
+	PM_TRANS_FLAG_NOSCRIPTLET = (1 << 10),
+	PM_TRANS_FLAG_NOCONFLICTS = (1 << 11),
+	/* (1 << 12) flag can go here */
+	PM_TRANS_FLAG_NEEDED = (1 << 13),
+	PM_TRANS_FLAG_ALLEXPLICIT = (1 << 14),
+	PM_TRANS_FLAG_UNNEEDED = (1 << 15),
+	PM_TRANS_FLAG_RECURSEALL = (1 << 16),
+	PM_TRANS_FLAG_NOLOCK = (1 << 17)
 } pmtransflag_t;
 
 /**
@@ -371,17 +369,22 @@ typedef enum _pmtransevt_t {
 	 * The repository's tree name is passed to the callback.
 	 */
 	PM_TRANS_EVT_RETRIEVE_START,
+	/** Disk space usage will be computed for a package */
+	PM_TRANS_EVT_DISKSPACE_START,
+	/** Disk space usage was computed for a package */
+	PM_TRANS_EVT_DISKSPACE_DONE,
 } pmtransevt_t;
 /*@}*/
 
 /* Transaction Conversations (ie, questions) */
 typedef enum _pmtransconv_t {
-	PM_TRANS_CONV_INSTALL_IGNOREPKG = 0x01,
-	PM_TRANS_CONV_REPLACE_PKG = 0x02,
-	PM_TRANS_CONV_CONFLICT_PKG = 0x04,
-	PM_TRANS_CONV_CORRUPTED_PKG = 0x08,
-	PM_TRANS_CONV_LOCAL_NEWER = 0x10,
-	PM_TRANS_CONV_REMOVE_PKGS = 0x20,
+	PM_TRANS_CONV_INSTALL_IGNOREPKG = 1,
+	PM_TRANS_CONV_REPLACE_PKG = (1 << 1),
+	PM_TRANS_CONV_CONFLICT_PKG = (1 << 2),
+	PM_TRANS_CONV_CORRUPTED_PKG = (1 << 3),
+	PM_TRANS_CONV_LOCAL_NEWER = (1 << 4),
+	PM_TRANS_CONV_REMOVE_PKGS = (1 << 5),
+	PM_TRANS_CONV_SELECT_PROVIDER = (1 << 6),
 } pmtransconv_t;
 
 /* Transaction Progress */
@@ -389,7 +392,9 @@ typedef enum _pmtransprog_t {
 	PM_TRANS_PROGRESS_ADD_START,
 	PM_TRANS_PROGRESS_UPGRADE_START,
 	PM_TRANS_PROGRESS_REMOVE_START,
-	PM_TRANS_PROGRESS_CONFLICTS_START
+	PM_TRANS_PROGRESS_CONFLICTS_START,
+	PM_TRANS_PROGRESS_DISKSPACE_START,
+	PM_TRANS_PROGRESS_INTEGRITY_START,
 } pmtransprog_t;
 
 /* Transaction Event callback */
@@ -400,21 +405,23 @@ typedef void (*alpm_trans_cb_conv)(pmtransconv_t, void *, void *,
                                    void *, int *);
 
 /* Transaction Progress callback */
-typedef void (*alpm_trans_cb_progress)(pmtransprog_t, const char *, int, int, int);
+typedef void (*alpm_trans_cb_progress)(pmtransprog_t, const char *, int, size_t, size_t);
 
-pmtranstype_t alpm_trans_get_type();
-unsigned int alpm_trans_get_flags();
-alpm_list_t * alpm_trans_get_pkgs();
-int alpm_trans_init(pmtranstype_t type, pmtransflag_t flags,
+int alpm_trans_get_flags(void);
+alpm_list_t * alpm_trans_get_add(void);
+alpm_list_t * alpm_trans_get_remove(void);
+int alpm_trans_init(pmtransflag_t flags,
                     alpm_trans_cb_event cb_event, alpm_trans_cb_conv conv,
                     alpm_trans_cb_progress cb_progress);
-int alpm_trans_sysupgrade(int enable_downgrade);
-int alpm_trans_addtarget(char *target);
 int alpm_trans_prepare(alpm_list_t **data);
 int alpm_trans_commit(alpm_list_t **data);
 int alpm_trans_interrupt(void);
 int alpm_trans_release(void);
 
+int alpm_sync_sysupgrade(int enable_downgrade);
+int alpm_add_pkg(pmpkg_t *pkg);
+int alpm_remove_pkg(pmpkg_t *pkg);
+
 /*
  * Dependencies and conflicts
  */
@@ -428,10 +435,10 @@ typedef enum _pmdepmod_t {
 	PM_DEP_MOD_LT
 } pmdepmod_t;
 
-int alpm_depcmp(pmpkg_t *pkg, pmdepend_t *dep);
 alpm_list_t *alpm_checkdeps(alpm_list_t *pkglist, int reversedeps,
 		alpm_list_t *remove, alpm_list_t *upgrade);
-alpm_list_t *alpm_deptest(pmdb_t *db, alpm_list_t *targets);
+pmpkg_t *alpm_find_satisfier(alpm_list_t *pkgs, const char *depstring);
+pmpkg_t *alpm_find_dbs_satisfier(alpm_list_t *dbs, const char *depstring);
 
 const char *alpm_miss_get_target(const pmdepmissing_t *miss);
 pmdepend_t *alpm_miss_get_dep(pmdepmissing_t *miss);
@@ -441,6 +448,7 @@ alpm_list_t *alpm_checkconflicts(alpm_list_t *pkglist);
 
 const char *alpm_conflict_get_package1(pmconflict_t *conflict);
 const char *alpm_conflict_get_package2(pmconflict_t *conflict);
+const char *alpm_conflict_get_reason(pmconflict_t *conflict);
 
 pmdepmod_t alpm_dep_get_mod(const pmdepend_t *dep);
 const char *alpm_dep_get_name(const pmdepend_t *dep);
@@ -478,6 +486,7 @@ enum _pmerrno_t {
 	PM_ERR_NOT_A_FILE,
 	PM_ERR_NOT_A_DIR,
 	PM_ERR_WRONG_ARGS,
+	PM_ERR_DISK_SPACE,
 	/* Interface */
 	PM_ERR_HANDLE_NULL,
 	PM_ERR_HANDLE_NOT_NULL,
@@ -488,6 +497,7 @@ enum _pmerrno_t {
 	PM_ERR_DB_NULL,
 	PM_ERR_DB_NOT_NULL,
 	PM_ERR_DB_NOT_FOUND,
+	PM_ERR_DB_VERSION,
 	PM_ERR_DB_WRITE,
 	PM_ERR_DB_REMOVE,
 	/* Servers */
@@ -509,6 +519,7 @@ enum _pmerrno_t {
 	PM_ERR_PKG_OPEN,
 	PM_ERR_PKG_CANT_REMOVE,
 	PM_ERR_PKG_INVALID_NAME,
+	PM_ERR_PKG_INVALID_ARCH,
 	PM_ERR_PKG_REPO_NOT_FOUND,
 	/* Deltas */
 	PM_ERR_DLT_INVALID,
@@ -519,6 +530,7 @@ enum _pmerrno_t {
 	PM_ERR_FILE_CONFLICTS,
 	/* Misc */
 	PM_ERR_RETRIEVE,
+	PM_ERR_WRITE,
 	PM_ERR_INVALID_REGEX,
 	/* External library errors */
 	PM_ERR_LIBARCHIVE,

lib/libalpm/alpm_list.c

@@ -1,7 +1,7 @@
 /*
  *  alpm_list.c
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -269,7 +269,7 @@ alpm_list_t SYMEXPORT *alpm_list_mmerge(alpm_list_t *left, alpm_list_t *right, a
  *
  * @return the resultant list
  */
-alpm_list_t SYMEXPORT *alpm_list_msort(alpm_list_t *list, int n, alpm_list_fn_cmp fn)
+alpm_list_t SYMEXPORT *alpm_list_msort(alpm_list_t *list, size_t n, alpm_list_fn_cmp fn)
 {
 	if (n > 1) {
 		alpm_list_t *left = list;
@@ -285,6 +285,53 @@ alpm_list_t SYMEXPORT *alpm_list_msort(alpm_list_t *list, int n, alpm_list_fn_cm
 	return(list);
 }
 
+/**
+ * @brief Remove an item from the list.
+ * item is not freed; this is the respnsiblity of the caller.
+ *
+ * @param haystack the list to remove the item from
+ * @param item the item to remove from the list
+ *
+ * @return the resultant list
+ */
+alpm_list_t SYMEXPORT *alpm_list_remove_item(alpm_list_t *haystack,
+		alpm_list_t *item)
+{
+	if(haystack == NULL || item == NULL) {
+		return(haystack);
+	}
+
+	if(item == haystack) {
+		/* Special case: removing the head node which has a back reference to
+		 * the tail node */
+		haystack = item->next;
+		if(haystack) {
+			haystack->prev = item->prev;
+		}
+		item->prev = NULL;
+	} else if(item == haystack->prev) {
+		/* Special case: removing the tail node, so we need to fix the back
+		 * reference on the head node. We also know tail != head. */
+		if(item->prev) {
+			/* i->next should always be null */
+			item->prev->next = item->next;
+			haystack->prev = item->prev;
+			item->prev = NULL;
+		}
+	} else {
+		/* Normal case, non-head and non-tail node */
+		if(item->next) {
+			item->next->prev = item->prev;
+		}
+		if(item->prev) {
+			item->prev->next = item->next;
+		}
+	}
+
+	return(haystack);
+}
+
+
 /**
  * @brief Remove an item from the list.
  *
@@ -295,9 +342,10 @@ alpm_list_t SYMEXPORT *alpm_list_msort(alpm_list_t *list, int n, alpm_list_fn_cm
  *
  * @return the resultant list
  */
-alpm_list_t SYMEXPORT *alpm_list_remove(alpm_list_t *haystack, const void *needle, alpm_list_fn_cmp fn, void **data)
+alpm_list_t SYMEXPORT *alpm_list_remove(alpm_list_t *haystack,
+		const void *needle, alpm_list_fn_cmp fn, void **data)
 {
-	alpm_list_t *i = haystack, *tmp = NULL;
+	alpm_list_t *i = haystack;
 
 	if(data) {
 		*data = NULL;
@@ -309,46 +357,19 @@ alpm_list_t SYMEXPORT *alpm_list_remove(alpm_list_t *haystack, const void *needl
 
 	while(i) {
 		if(i->data == NULL) {
+			i = i->next;
 			continue;
 		}
-		tmp = i->next;
 		if(fn(i->data, needle) == 0) {
-			/* we found a matching item */
-			if(i == haystack) {
-				/* Special case: removing the head node which has a back reference to
-				 * the tail node */
-				haystack = i->next;
-				if(haystack) {
-					haystack->prev = i->prev;
-				}
-				i->prev = NULL;
-			} else if(i == haystack->prev) {
-				/* Special case: removing the tail node, so we need to fix the back
-				 * reference on the head node. We also know tail != head. */
-				if(i->prev) {
-					/* i->next should always be null */
-					i->prev->next = i->next;
-					haystack->prev = i->prev;
-					i->prev = NULL;
-				}
-			} else {
-				/* Normal case, non-head and non-tail node */
-				if(i->next) {
-					i->next->prev = i->prev;
-				}
-				if(i->prev) {
-					i->prev->next = i->next;
-				}
-			}
+			haystack = alpm_list_remove_item(haystack, i);
 
 			if(data) {
 				*data = i->data;
 			}
-			i->data = NULL;
 			free(i);
-			i = NULL;
+			break;
 		} else {
-			i = tmp;
+			i = i->next;
 		}
 	}
 
@@ -510,7 +531,7 @@ inline alpm_list_t SYMEXPORT *alpm_list_first(const alpm_list_t *list)
  *
  * @return an alpm_list_t node for index `n`
  */
-alpm_list_t SYMEXPORT *alpm_list_nth(const alpm_list_t *list, int n)
+alpm_list_t SYMEXPORT *alpm_list_nth(const alpm_list_t *list, size_t n)
 {
 	const alpm_list_t *i = list;
 	while(n--) {
@@ -573,9 +594,9 @@ void SYMEXPORT *alpm_list_getdata(const alpm_list_t *node)
  *
  * @return the number of list items
  */
-int SYMEXPORT alpm_list_count(const alpm_list_t *list)
+size_t SYMEXPORT alpm_list_count(const alpm_list_t *list)
 {
-	unsigned int i = 0;
+	size_t i = 0;
 	const alpm_list_t *lp = list;
 	while(lp) {
 		++i;
@@ -615,7 +636,7 @@ static int ptr_cmp(const void *p, const void *q)
 /**
  * @brief Find an item in a list.
  *
- * Search for the item whos data matches that of the `needle`.
+ * Search for the item whose data matches that of the `needle`.
  *
  * @param needle   the data to search for (== comparison)
  * @param haystack the list
@@ -643,11 +664,65 @@ char SYMEXPORT *alpm_list_find_str(const alpm_list_t *haystack,
 }
 
 /**
- * @brief Find the items in list `lhs` that are not present in list `rhs`.
+ * @brief Find the differences between list `left` and list `right`
  *
- * Entries are not duplicated. Operation is O(m*n). The first list is stepped
- * through one node at a time, and for each node in the first list, each node
- * in the second list is compared to it.
+ * The two lists must be sorted. Items only in list `left` are added to the
+ * `onlyleft` list. Items only in list `right` are added to the `onlyright`
+ * list.
+ *
+ * @param left      the first list
+ * @param right     the second list
+ * @param fn        the comparison function
+ * @param onlyleft  pointer to the first result list
+ * @param onlyright pointer to the second result list
+ *
+ */
+void SYMEXPORT alpm_list_diff_sorted(const alpm_list_t *left,
+		const alpm_list_t *right, alpm_list_fn_cmp fn,
+		alpm_list_t **onlyleft, alpm_list_t **onlyright)
+{
+	const alpm_list_t *l = left;
+	const alpm_list_t *r = right;
+
+	if(!onlyleft && !onlyright) {
+		return;
+	}
+
+	while (l != NULL && r != NULL) {
+		int cmp = fn(l->data, r->data);
+		if(cmp < 0) {
+			if(onlyleft) {
+				*onlyleft = alpm_list_add(*onlyleft, l->data);
+			}
+			l = l->next;
+		}
+		else if(cmp > 0) {
+			if(onlyright) {
+				*onlyright = alpm_list_add(*onlyright, r->data);
+			}
+			r = r->next;
+		} else {
+			l = l->next;
+			r = r->next;
+		}
+	}
+	while (l != NULL) {
+		if(onlyleft) {
+			*onlyleft = alpm_list_add(*onlyleft, l->data);
+		}
+		l = l->next;
+	}
+	while (r != NULL) {
+		if(onlyright) {
+			*onlyright = alpm_list_add(*onlyright, r->data);
+		}
+		r = r->next;
+	}
+}
+
+
+/**
+ * @brief Find the items in list `lhs` that are not present in list `rhs`.
  *
  * @param lhs the first list
  * @param rhs the second list
@@ -658,21 +733,18 @@ char SYMEXPORT *alpm_list_find_str(const alpm_list_t *haystack,
 alpm_list_t SYMEXPORT *alpm_list_diff(const alpm_list_t *lhs,
 		const alpm_list_t *rhs, alpm_list_fn_cmp fn)
 {
-	const alpm_list_t *i, *j;
+	alpm_list_t *left, *right;
 	alpm_list_t *ret = NULL;
-	for(i = lhs; i; i = i->next) {
-		int found = 0;
-		for(j = rhs; j; j = j->next) {
-			if(fn(i->data, j->data) == 0) {
-				found = 1;
-				break;
-			}
-		}
-		if(!found) {
-			ret = alpm_list_add(ret, i->data);
-		}
-	}
 
+	left = alpm_list_copy(lhs);
+	left = alpm_list_msort(left, alpm_list_count(left), fn);
+	right = alpm_list_copy(rhs);
+	right = alpm_list_msort(right, alpm_list_count(right), fn);
+
+	alpm_list_diff_sorted(left, right, fn, &ret, NULL);
+
+	alpm_list_free(left);
+	alpm_list_free(right);
 	return(ret);
 }
 

lib/libalpm/alpm_list.h

@@ -1,7 +1,7 @@
 /*
  *  alpm_list.h
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -56,7 +56,8 @@ alpm_list_t *alpm_list_add(alpm_list_t *list, void *data);
 alpm_list_t *alpm_list_add_sorted(alpm_list_t *list, void *data, alpm_list_fn_cmp fn);
 alpm_list_t *alpm_list_join(alpm_list_t *first, alpm_list_t *second);
 alpm_list_t *alpm_list_mmerge(alpm_list_t *left, alpm_list_t *right, alpm_list_fn_cmp fn);
-alpm_list_t *alpm_list_msort(alpm_list_t *list, int n, alpm_list_fn_cmp fn);
+alpm_list_t *alpm_list_msort(alpm_list_t *list, size_t n, alpm_list_fn_cmp fn);
+alpm_list_t *alpm_list_remove_item(alpm_list_t *haystack, alpm_list_t *item);
 alpm_list_t *alpm_list_remove(alpm_list_t *haystack, const void *needle, alpm_list_fn_cmp fn, void **data);
 alpm_list_t *alpm_list_remove_str(alpm_list_t *haystack, const char *needle, char **data);
 alpm_list_t *alpm_list_remove_dupes(const alpm_list_t *list);
@@ -67,17 +68,19 @@ alpm_list_t *alpm_list_reverse(alpm_list_t *list);
 
 /* item accessors */
 alpm_list_t *alpm_list_first(const alpm_list_t *list);
-alpm_list_t *alpm_list_nth(const alpm_list_t *list, int n);
+alpm_list_t *alpm_list_nth(const alpm_list_t *list, size_t n);
 alpm_list_t *alpm_list_next(const alpm_list_t *list);
 alpm_list_t *alpm_list_last(const alpm_list_t *list);
 void *alpm_list_getdata(const alpm_list_t *entry);
 
 /* misc */
-int alpm_list_count(const alpm_list_t *list);
+size_t alpm_list_count(const alpm_list_t *list);
 void *alpm_list_find(const alpm_list_t *haystack, const void *needle, alpm_list_fn_cmp fn);
 void *alpm_list_find_ptr(const alpm_list_t *haystack, const void *needle);
 char *alpm_list_find_str(const alpm_list_t *haystack, const char *needle);
 alpm_list_t *alpm_list_diff(const alpm_list_t *lhs, const alpm_list_t *rhs, alpm_list_fn_cmp fn);
+void alpm_list_diff_sorted(const alpm_list_t *left, const alpm_list_t *right,
+		alpm_list_fn_cmp fn, alpm_list_t **onlyleft, alpm_list_t **onlyright);
 
 #ifdef __cplusplus
 }

lib/libalpm/backup.c

@@ -1,7 +1,7 @@
 /*
  *  backup.c
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2005 by Judd Vinet <jvinet@zeroflux.org>
  *  Copyright (c) 2005 by Aurelien Foret <orelien@chez.com>
  *  Copyright (c) 2005 by Christian Hamar <krics@linuxforum.hu>
@@ -33,7 +33,7 @@
 #include "util.h"
 
 /* split a backup string "file\thash" into two strings : file and hash */
-int _alpm_backup_split(const char *string, char **file, char **hash)
+static int backup_split(const char *string, char **file, char **hash)
 {
 	char *str = strdup(string);
 	char *ptr;
@@ -65,14 +65,14 @@ int _alpm_backup_split(const char *string, char **file, char **hash)
 char *_alpm_backup_file(const char *string)
 {
 	char *file = NULL;
-	_alpm_backup_split(string, &file, NULL);
+	backup_split(string, &file, NULL);
 	return(file);
 }
 
 char *_alpm_backup_hash(const char *string)
 {
 	char *hash = NULL;
-	_alpm_backup_split(string, NULL, &hash);
+	backup_split(string, NULL, &hash);
 	return(hash);
 }
 
@@ -95,7 +95,7 @@ char *_alpm_needbackup(const char *file, const alpm_list_t *backup)
 		char *hash = NULL;
 
 		/* no hash found */
-		if(!_alpm_backup_split((char *)lp->data, &filename, &hash)) {
+		if(!backup_split((char *)lp->data, &filename, &hash)) {
 			FREE(filename);
 			continue;
 		}

lib/libalpm/backup.h

@@ -1,7 +1,7 @@
 /*
  *  backup.h
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify

lib/libalpm/be_files.c

@@ -1,921 +0,0 @@
-/*
- *  be_files.c
- *
- *  Copyright (c) 2006 by Christian Hamar <krics@linuxforum.hu>
- *  Copyright (c) 2006 by Miklos Vajna <vmiklos@frugalware.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "config.h"
-
-#include <unistd.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <string.h>
-#include <stdint.h> /* uintmax_t, intmax_t */
-#include <sys/stat.h>
-#include <dirent.h>
-#include <ctype.h>
-#include <time.h>
-#include <limits.h> /* PATH_MAX */
-#include <locale.h> /* setlocale */
-
-/* libalpm */
-#include "db.h"
-#include "alpm_list.h"
-#include "cache.h"
-#include "log.h"
-#include "util.h"
-#include "alpm.h"
-#include "handle.h"
-#include "package.h"
-#include "delta.h"
-#include "deps.h"
-#include "dload.h"
-
-
-/*
- * Return the last update time as number of seconds from the epoch.
- * Returns 0 if the value is unknown or can't be read.
- */
-static time_t getlastupdate(const pmdb_t *db)
-{
-	FILE *fp;
-	char *file;
-	time_t ret = 0;
-
-	ALPM_LOG_FUNC;
-
-	if(db == NULL) {
-		return(ret);
-	}
-
-	/* db->path + '.lastupdate' + NULL */
-	MALLOC(file, strlen(db->path) + 12, RET_ERR(PM_ERR_MEMORY, ret));
-	sprintf(file, "%s.lastupdate", db->path);
-
-	/* get the last update time, if it's there */
-	if((fp = fopen(file, "r")) == NULL) {
-		free(file);
-		return(ret);
-	} else {
-		char line[64];
-		if(fgets(line, sizeof(line), fp)) {
-			ret = atol(line);
-		}
-	}
-	fclose(fp);
-	free(file);
-	return(ret);
-}
-
-/*
- * writes the dbpath/.lastupdate file with the value in time
- */
-static int setlastupdate(const pmdb_t *db, time_t time)
-{
-	FILE *fp;
-	char *file;
-	int ret = 0;
-
-	ALPM_LOG_FUNC;
-
-	if(db == NULL || time == 0) {
-		return(-1);
-	}
-
-	/* db->path + '.lastupdate' + NULL */
-	MALLOC(file, strlen(db->path) + 12, RET_ERR(PM_ERR_MEMORY, ret));
-	sprintf(file, "%s.lastupdate", db->path);
-
-	if((fp = fopen(file, "w")) == NULL) {
-		free(file);
-		return(-1);
-	}
-	if(fprintf(fp, "%ju", (uintmax_t)time) <= 0) {
-		ret = -1;
-	}
-	fclose(fp);
-	free(file);
-	return(ret);
-}
-
-static int checkdbdir(pmdb_t *db)
-{
-	struct stat buf;
-	char *path = db->path;
-
-	if(stat(path, &buf) != 0) {
-		_alpm_log(PM_LOG_DEBUG, "database dir '%s' does not exist, creating it\n",
-				path);
-		if(_alpm_makepath(path) != 0) {
-			RET_ERR(PM_ERR_SYSTEM, -1);
-		}
-	} else if(!S_ISDIR(buf.st_mode)) {
-		_alpm_log(PM_LOG_WARNING, "removing bogus database: %s\n", path);
-		if(unlink(path) != 0 || _alpm_makepath(path) != 0) {
-			RET_ERR(PM_ERR_SYSTEM, -1);
-		}
-	}
-	return(0);
-}
-
-/** Update a package database
- *
- * An update of the package database \a db will be attempted. Unless
- * \a force is true, the update will only be performed if the remote
- * database was modified since the last update.
- *
- * A transaction is necessary for this operation, in order to obtain a
- * database lock. During this transaction the front-end will be informed
- * of the download progress of the database via the download callback.
- *
- * Example:
- * @code
- * pmdb_t *db;
- * int result;
- * db = alpm_list_getdata(alpm_option_get_syncdbs());
- * if(alpm_trans_init(PM_TRANS_TYPE_SYNC, 0, NULL, NULL, NULL) == 0) {
- *     result = alpm_db_update(0, db);
- *     alpm_trans_release();
- *
- *     if(result > 0) {
- *	       printf("Unable to update database: %s\n", alpm_strerrorlast());
- *     } else if(result < 0) {
- *         printf("Database already up to date\n");
- *     } else {
- *         printf("Database updated\n");
- *     }
- * }
- * @endcode
- *
- * @ingroup alpm_databases
- * @note After a successful update, the \link alpm_db_get_pkgcache()
- * package cache \endlink will be invalidated
- * @param force if true, then forces the update, otherwise update only in case
- * the database isn't up to date
- * @param db pointer to the package database to update
- * @return 0 on success, > 0 on error (pm_errno is set accordingly), < 0 if up
- * to date
- */
-int SYMEXPORT alpm_db_update(int force, pmdb_t *db)
-{
-	char *dbfile, *dbfilepath;
-	time_t newmtime = 0, lastupdate = 0;
-	const char *dbpath;
-	size_t len;
-
-	int ret;
-
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, RET_ERR(PM_ERR_HANDLE_NULL, -1));
-	ASSERT(db != NULL && db != handle->db_local, RET_ERR(PM_ERR_WRONG_ARGS, -1));
-	/* Verify we are in a transaction.  This is done _mainly_ because we need a DB
-	 * lock - if we update without a db lock, we may kludge some other pacman
-	 * process that _has_ a lock.
-	 */
-	ASSERT(handle->trans != NULL, RET_ERR(PM_ERR_TRANS_NULL, -1));
-	ASSERT(handle->trans->state == STATE_INITIALIZED, RET_ERR(PM_ERR_TRANS_NOT_INITIALIZED, -1));
-	ASSERT(handle->trans->type == PM_TRANS_TYPE_SYNC, RET_ERR(PM_ERR_TRANS_TYPE, -1));
-
-	if(!alpm_list_find_ptr(handle->dbs_sync, db)) {
-		RET_ERR(PM_ERR_DB_NOT_FOUND, -1);
-	}
-
-	if(!force) {
-		/* get the lastupdate time */
-		lastupdate = getlastupdate(db);
-		if(lastupdate == 0) {
-			_alpm_log(PM_LOG_DEBUG, "failed to get lastupdate time for %s\n",
-					db->treename);
-		}
-	}
-
-	len = strlen(db->treename) + strlen(DBEXT) + 1;
-	MALLOC(dbfile, len, RET_ERR(PM_ERR_MEMORY, -1));
-	sprintf(dbfile, "%s" DBEXT, db->treename);
-
-	dbpath = alpm_option_get_dbpath();
-
-	ret = _alpm_download_single_file(dbfile, db->servers, dbpath,
-			lastupdate, &newmtime);
-	free(dbfile);
-
-	if(ret == 1) {
-		/* mtimes match, do nothing */
-		pm_errno = 0;
-		return(1);
-	} else if(ret == -1) {
-		/* pm_errno was set by the download code */
-		_alpm_log(PM_LOG_DEBUG, "failed to sync db: %s\n", alpm_strerrorlast());
-		return(-1);
-	} else {
-		/* remove the old dir */
-		if(_alpm_rmrf(db->path) != 0) {
-			_alpm_log(PM_LOG_ERROR, _("could not remove database %s\n"), db->treename);
-			RET_ERR(PM_ERR_DB_REMOVE, -1);
-		}
-
-		/* Cache needs to be rebuilt */
-		_alpm_db_free_pkgcache(db);
-
-		/* form the path to the db location */
-		len = strlen(dbpath) + strlen(db->treename) + strlen(DBEXT) + 1;
-		MALLOC(dbfilepath, len, RET_ERR(PM_ERR_MEMORY, -1));
-		sprintf(dbfilepath, "%s%s" DBEXT, dbpath, db->treename);
-
-		/* uncompress the sync database */
-		checkdbdir(db);
-		ret = _alpm_unpack(dbfilepath, db->path, NULL);
-		if(ret) {
-			free(dbfilepath);
-			RET_ERR(PM_ERR_SYSTEM, -1);
-		}
-		unlink(dbfilepath);
-		free(dbfilepath);
-
-		/* if we have a new mtime, set the DB last update value */
-		if(newmtime) {
-			_alpm_log(PM_LOG_DEBUG, "sync: new mtime for %s: %ju\n",
-					db->treename, (uintmax_t)newmtime);
-			setlastupdate(db, newmtime);
-		}
-	}
-
-	return(0);
-}
-
-
-static int splitname(const char *target, pmpkg_t *pkg)
-{
-	/* the format of a db entry is as follows:
-	 *    package-version-rel/
-	 * package name can contain hyphens, so parse from the back- go back
-	 * two hyphens and we have split the version from the name.
-	 */
-	char *tmp, *p, *q;
-
-	if(target == NULL || pkg == NULL) {
-		return(-1);
-	}
-	STRDUP(tmp, target, RET_ERR(PM_ERR_MEMORY, -1));
-	p = tmp + strlen(tmp);
-
-	/* do the magic parsing- find the beginning of the version string
-	 * by doing two iterations of same loop to lop off two hyphens */
-	for(q = --p; *q && *q != '-'; q--);
-	for(p = --q; *p && *p != '-'; p--);
-	if(*p != '-' || p == tmp) {
-		return(-1);
-	}
-
-	/* copy into fields and return */
-	if(pkg->version) {
-		FREE(pkg->version);
-	}
-	STRDUP(pkg->version, p+1, RET_ERR(PM_ERR_MEMORY, -1));
-	/* insert a terminator at the end of the name (on hyphen)- then copy it */
-	*p = '\0';
-	if(pkg->name) {
-		FREE(pkg->name);
-	}
-	STRDUP(pkg->name, tmp, RET_ERR(PM_ERR_MEMORY, -1));
-
-	free(tmp);
-	return(0);
-}
-
-int _alpm_db_populate(pmdb_t *db)
-{
-	int count = 0;
-	struct dirent *ent = NULL;
-	struct stat sbuf;
-	char path[PATH_MAX];
-	DIR *dbdir;
-
-	ALPM_LOG_FUNC;
-
-	ASSERT(db != NULL, RET_ERR(PM_ERR_DB_NULL, -1));
-
-	dbdir = opendir(db->path);
-	if(dbdir == NULL) {
-		return(0);
-	}
-	while((ent = readdir(dbdir)) != NULL) {
-		const char *name = ent->d_name;
-		pmpkg_t *pkg;
-
-		if(strcmp(name, ".") == 0 || strcmp(name, "..") == 0) {
-			continue;
-		}
-		/* stat the entry, make sure it's a directory */
-		snprintf(path, PATH_MAX, "%s%s", db->path, name);
-		if(stat(path, &sbuf) != 0 || !S_ISDIR(sbuf.st_mode)) {
-			continue;
-		}
-
-		pkg = _alpm_pkg_new();
-		if(pkg == NULL) {
-			closedir(dbdir);
-			return(-1);
-		}
-		/* split the db entry name */
-		if(splitname(name, pkg) != 0) {
-			_alpm_log(PM_LOG_ERROR, _("invalid name for database entry '%s'\n"),
-					name);
-			_alpm_pkg_free(pkg);
-			continue;
-		}
-
-		/* explicitly read with only 'BASE' data, accessors will handle the rest */
-		if(_alpm_db_read(db, pkg, INFRQ_BASE) == -1) {
-			_alpm_log(PM_LOG_ERROR, _("corrupted database entry '%s'\n"), name);
-			_alpm_pkg_free(pkg);
-			continue;
-		}
-		pkg->origin = PKG_FROM_CACHE;
-		pkg->origin_data.db = db;
-		/* add to the collection */
-		_alpm_log(PM_LOG_FUNCTION, "adding '%s' to package cache for db '%s'\n",
-				pkg->name, db->treename);
-		db->pkgcache = alpm_list_add(db->pkgcache, pkg);
-		count++;
-	}
-
-	closedir(dbdir);
-	db->pkgcache = alpm_list_msort(db->pkgcache, count, _alpm_pkg_cmp);
-	return(count);
-}
-
-/* Note: the return value must be freed by the caller */
-static char *get_pkgpath(pmdb_t *db, pmpkg_t *info)
-{
-	size_t len;
-	char *pkgpath;
-
-	len = strlen(db->path) + strlen(info->name) + strlen(info->version) + 3;
-	MALLOC(pkgpath, len, RET_ERR(PM_ERR_MEMORY, NULL));
-	sprintf(pkgpath, "%s%s-%s/", db->path, info->name, info->version);
-	return(pkgpath);
-}
-
-int _alpm_db_read(pmdb_t *db, pmpkg_t *info, pmdbinfrq_t inforeq)
-{
-	FILE *fp = NULL;
-	char path[PATH_MAX];
-	char line[513];
-	char *pkgpath = NULL;
-
-	ALPM_LOG_FUNC;
-
-	if(db == NULL) {
-		RET_ERR(PM_ERR_DB_NULL, -1);
-	}
-
-	if(info == NULL || info->name == NULL || info->version == NULL) {
-		_alpm_log(PM_LOG_DEBUG, "invalid package entry provided to _alpm_db_read, skipping\n");
-		return(-1);
-	}
-
-	if(info->origin == PKG_FROM_FILE) {
-		_alpm_log(PM_LOG_DEBUG, "request to read database info for a file-based package '%s', skipping...\n", info->name);
-		return(-1);
-	}
-
-	/* bitmask logic here:
-	 * infolevel: 00001111
-	 * inforeq:   00010100
-	 * & result:  00000100
-	 * == to inforeq? nope, we need to load more info. */
-	if((info->infolevel & inforeq) == inforeq) {
-		/* already loaded this info, do nothing */
-		return(0);
-	}
-	_alpm_log(PM_LOG_FUNCTION, "loading package data for %s : level=0x%x\n",
-			info->name, inforeq);
-
-	/* clear out 'line', to be certain - and to make valgrind happy */
-	memset(line, 0, 513);
-
-	pkgpath = get_pkgpath(db, info);
-
-	if(access(pkgpath, F_OK)) {
-		/* directory doesn't exist or can't be opened */
-		_alpm_log(PM_LOG_DEBUG, "cannot find '%s-%s' in db '%s'\n",
-				info->name, info->version, db->treename);
-		goto error;
-	}
-
-	/* DESC */
-	if(inforeq & INFRQ_DESC) {
-		snprintf(path, PATH_MAX, "%sdesc", pkgpath);
-		if((fp = fopen(path, "r")) == NULL) {
-			_alpm_log(PM_LOG_ERROR, _("could not open file %s: %s\n"), path, strerror(errno));
-			goto error;
-		}
-		while(!feof(fp)) {
-			if(fgets(line, 256, fp) == NULL) {
-				break;
-			}
-			_alpm_strtrim(line);
-			if(strcmp(line, "%NAME%") == 0) {
-				if(fgets(line, 512, fp) == NULL) {
-					goto error;
-				}
-				if(strcmp(_alpm_strtrim(line), info->name) != 0) {
-					_alpm_log(PM_LOG_ERROR, _("%s database is inconsistent: name "
-								"mismatch on package %s\n"), db->treename, info->name);
-				}
-			} else if(strcmp(line, "%VERSION%") == 0) {
-				if(fgets(line, 512, fp) == NULL) {
-					goto error;
-				}
-				if(strcmp(_alpm_strtrim(line), info->version) != 0) {
-					_alpm_log(PM_LOG_ERROR, _("%s database is inconsistent: version "
-								"mismatch on package %s\n"), db->treename, info->name);
-				}
-			} else if(strcmp(line, "%FILENAME%") == 0) {
-				if(fgets(line, 512, fp) == NULL) {
-					goto error;
-				}
-				STRDUP(info->filename, _alpm_strtrim(line), goto error);
-			} else if(strcmp(line, "%DESC%") == 0) {
-				if(fgets(line, 512, fp) == NULL) {
-					goto error;
-				}
-				STRDUP(info->desc, _alpm_strtrim(line), goto error);
-			} else if(strcmp(line, "%GROUPS%") == 0) {
-				while(fgets(line, 512, fp) && strlen(_alpm_strtrim(line))) {
-					char *linedup;
-					STRDUP(linedup, _alpm_strtrim(line), goto error);
-					info->groups = alpm_list_add(info->groups, linedup);
-				}
-			} else if(strcmp(line, "%URL%") == 0) {
-				if(fgets(line, 512, fp) == NULL) {
-					goto error;
-				}
-				STRDUP(info->url, _alpm_strtrim(line), goto error);
-			} else if(strcmp(line, "%LICENSE%") == 0) {
-				while(fgets(line, 512, fp) && strlen(_alpm_strtrim(line))) {
-					char *linedup;
-					STRDUP(linedup, _alpm_strtrim(line), goto error);
-					info->licenses = alpm_list_add(info->licenses, linedup);
-				}
-			} else if(strcmp(line, "%ARCH%") == 0) {
-				if(fgets(line, 512, fp) == NULL) {
-					goto error;
-				}
-				STRDUP(info->arch, _alpm_strtrim(line), goto error);
-			} else if(strcmp(line, "%BUILDDATE%") == 0) {
-				if(fgets(line, 512, fp) == NULL) {
-					goto error;
-				}
-				_alpm_strtrim(line);
-
-				char first = tolower(line[0]);
-				if(first > 'a' && first < 'z') {
-					struct tm tmp_tm = {0}; /* initialize to null in case of failure */
-					setlocale(LC_TIME, "C");
-					strptime(line, "%a %b %e %H:%M:%S %Y", &tmp_tm);
-					info->builddate = mktime(&tmp_tm);
-					setlocale(LC_TIME, "");
-				} else {
-					info->builddate = atol(line);
-				}
-			} else if(strcmp(line, "%INSTALLDATE%") == 0) {
-				if(fgets(line, 512, fp) == NULL) {
-					goto error;
-				}
-				_alpm_strtrim(line);
-
-				char first = tolower(line[0]);
-				if(first > 'a' && first < 'z') {
-					struct tm tmp_tm = {0}; /* initialize to null in case of failure */
-					setlocale(LC_TIME, "C");
-					strptime(line, "%a %b %e %H:%M:%S %Y", &tmp_tm);
-					info->installdate = mktime(&tmp_tm);
-					setlocale(LC_TIME, "");
-				} else {
-					info->installdate = atol(line);
-				}
-			} else if(strcmp(line, "%PACKAGER%") == 0) {
-				if(fgets(line, 512, fp) == NULL) {
-					goto error;
-				}
-				STRDUP(info->packager, _alpm_strtrim(line), goto error);
-			} else if(strcmp(line, "%REASON%") == 0) {
-				if(fgets(line, 512, fp) == NULL) {
-					goto error;
-				}
-				info->reason = (pmpkgreason_t)atol(_alpm_strtrim(line));
-			} else if(strcmp(line, "%SIZE%") == 0 || strcmp(line, "%CSIZE%") == 0) {
-				/* NOTE: the CSIZE and SIZE fields both share the "size" field
-				 *       in the pkginfo_t struct.  This can be done b/c CSIZE
-				 *       is currently only used in sync databases, and SIZE is
-				 *       only used in local databases.
-				 */
-				if(fgets(line, 512, fp) == NULL) {
-					goto error;
-				}
-				info->size = atol(_alpm_strtrim(line));
-				/* also store this value to isize if isize is unset */
-				if(info->isize == 0) {
-					info->isize = info->size;
-				}
-			} else if(strcmp(line, "%ISIZE%") == 0) {
-				/* ISIZE (installed size) tag only appears in sync repositories,
-				 * not the local one. */
-				if(fgets(line, 512, fp) == NULL) {
-					goto error;
-				}
-				info->isize = atol(_alpm_strtrim(line));
-			} else if(strcmp(line, "%MD5SUM%") == 0) {
-				/* MD5SUM tag only appears in sync repositories,
-				 * not the local one. */
-				if(fgets(line, 512, fp) == NULL) {
-					goto error;
-				}
-				STRDUP(info->md5sum, _alpm_strtrim(line), goto error);
-			} else if(strcmp(line, "%REPLACES%") == 0) {
-				while(fgets(line, 512, fp) && strlen(_alpm_strtrim(line))) {
-					char *linedup;
-					STRDUP(linedup, _alpm_strtrim(line), goto error);
-					info->replaces = alpm_list_add(info->replaces, linedup);
-				}
-			} else if(strcmp(line, "%FORCE%") == 0) {
-				info->force = 1;
-			}
-		}
-		fclose(fp);
-		fp = NULL;
-	}
-
-	/* FILES */
-	if(inforeq & INFRQ_FILES) {
-		snprintf(path, PATH_MAX, "%sfiles", pkgpath);
-		if((fp = fopen(path, "r")) == NULL) {
-			_alpm_log(PM_LOG_ERROR, _("could not open file %s: %s\n"), path, strerror(errno));
-			goto error;
-		}
-		while(fgets(line, 256, fp)) {
-			_alpm_strtrim(line);
-			if(strcmp(line, "%FILES%") == 0) {
-				while(fgets(line, 512, fp) && strlen(_alpm_strtrim(line))) {
-					char *linedup;
-					STRDUP(linedup, _alpm_strtrim(line), goto error);
-					info->files = alpm_list_add(info->files, linedup);
-				}
-			} else if(strcmp(line, "%BACKUP%") == 0) {
-				while(fgets(line, 512, fp) && strlen(_alpm_strtrim(line))) {
-					char *linedup;
-					STRDUP(linedup, _alpm_strtrim(line), goto error);
-					info->backup = alpm_list_add(info->backup, linedup);
-				}
-			}
-		}
-		fclose(fp);
-		fp = NULL;
-	}
-
-	/* DEPENDS */
-	if(inforeq & INFRQ_DEPENDS) {
-		snprintf(path, PATH_MAX, "%sdepends", pkgpath);
-		if((fp = fopen(path, "r")) == NULL) {
-			_alpm_log(PM_LOG_ERROR, _("could not open file %s: %s\n"), path, strerror(errno));
-			goto error;
-		}
-		while(!feof(fp)) {
-			fgets(line, 255, fp);
-			_alpm_strtrim(line);
-			if(strcmp(line, "%DEPENDS%") == 0) {
-				while(fgets(line, 512, fp) && strlen(_alpm_strtrim(line))) {
-					pmdepend_t *dep = _alpm_splitdep(_alpm_strtrim(line));
-					info->depends = alpm_list_add(info->depends, dep);
-				}
-			} else if(strcmp(line, "%OPTDEPENDS%") == 0) {
-				while(fgets(line, 512, fp) && strlen(_alpm_strtrim(line))) {
-					char *linedup;
-					STRDUP(linedup, _alpm_strtrim(line), goto error);
-					info->optdepends = alpm_list_add(info->optdepends, linedup);
-				}
-			} else if(strcmp(line, "%CONFLICTS%") == 0) {
-				while(fgets(line, 512, fp) && strlen(_alpm_strtrim(line))) {
-					char *linedup;
-					STRDUP(linedup, _alpm_strtrim(line), goto error);
-					info->conflicts = alpm_list_add(info->conflicts, linedup);
-				}
-			} else if(strcmp(line, "%PROVIDES%") == 0) {
-				while(fgets(line, 512, fp) && strlen(_alpm_strtrim(line))) {
-					char *linedup;
-					STRDUP(linedup, _alpm_strtrim(line), goto error);
-					info->provides = alpm_list_add(info->provides, linedup);
-				}
-			}
-		}
-		fclose(fp);
-		fp = NULL;
-	}
-
-	/* DELTAS */
-	if(inforeq & INFRQ_DELTAS) {
-		snprintf(path, PATH_MAX, "%sdeltas", pkgpath);
-		if((fp = fopen(path, "r"))) {
-			while(!feof(fp)) {
-				fgets(line, 255, fp);
-				_alpm_strtrim(line);
-				if(strcmp(line, "%DELTAS%") == 0) {
-					while(fgets(line, 512, fp) && strlen(_alpm_strtrim(line))) {
-						pmdelta_t *delta = _alpm_delta_parse(line);
-						if(delta) {
-							info->deltas = alpm_list_add(info->deltas, delta);
-						}
-					}
-				}
-			}
-			fclose(fp);
-			fp = NULL;
-		}
-	}
-
-	/* INSTALL */
-	if(inforeq & INFRQ_SCRIPTLET) {
-		snprintf(path, PATH_MAX, "%sinstall", pkgpath);
-		if(access(path, F_OK) == 0) {
-			info->scriptlet = 1;
-		}
-	}
-
-	/* internal */
-	info->infolevel |= inforeq;
-
-	free(pkgpath);
-	return(0);
-
-error:
-	free(pkgpath);
-	if(fp) {
-		fclose(fp);
-	}
-	return(-1);
-}
-
-int _alpm_db_prepare(pmdb_t *db, pmpkg_t *info)
-{
-	mode_t oldmask;
-	int retval = 0;
-	char *pkgpath = NULL;
-
-	if(checkdbdir(db) != 0) {
-		return(-1);
-	}
-
-	oldmask = umask(0000);
-	pkgpath = get_pkgpath(db, info);
-
-	if((retval = mkdir(pkgpath, 0755)) != 0) {
-		_alpm_log(PM_LOG_ERROR, _("could not create directory %s: %s\n"),
-				pkgpath, strerror(errno));
-	}
-
-	free(pkgpath);
-	umask(oldmask);
-
-	return(retval);
-}
-
-int _alpm_db_write(pmdb_t *db, pmpkg_t *info, pmdbinfrq_t inforeq)
-{
-	FILE *fp = NULL;
-	char path[PATH_MAX];
-	mode_t oldmask;
-	alpm_list_t *lp = NULL;
-	int retval = 0;
-	int local = 0;
-	char *pkgpath = NULL;
-
-	ALPM_LOG_FUNC;
-
-	if(db == NULL || info == NULL) {
-		return(-1);
-	}
-
-	pkgpath = get_pkgpath(db, info);
-
-	/* make sure we have a sane umask */
-	oldmask = umask(0022);
-
-	if(strcmp(db->treename, "local") == 0) {
-		local = 1;
-	}
-
-	/* DESC */
-	if(inforeq & INFRQ_DESC) {
-		_alpm_log(PM_LOG_DEBUG, "writing %s-%s DESC information back to db\n",
-				info->name, info->version);
-		snprintf(path, PATH_MAX, "%sdesc", pkgpath);
-		if((fp = fopen(path, "w")) == NULL) {
-			_alpm_log(PM_LOG_ERROR, _("could not open file %s: %s\n"), path, strerror(errno));
-			retval = -1;
-			goto cleanup;
-		}
-		fprintf(fp, "%%NAME%%\n%s\n\n"
-						"%%VERSION%%\n%s\n\n", info->name, info->version);
-		if(info->desc) {
-			fprintf(fp, "%%DESC%%\n"
-							"%s\n\n", info->desc);
-		}
-		if(info->groups) {
-			fputs("%GROUPS%\n", fp);
-			for(lp = info->groups; lp; lp = lp->next) {
-				fprintf(fp, "%s\n", (char *)lp->data);
-			}
-			fprintf(fp, "\n");
-		}
-		if(info->replaces) {
-			fputs("%REPLACES%\n", fp);
-			for(lp = info->replaces; lp; lp = lp->next) {
-				fprintf(fp, "%s\n", (char *)lp->data);
-			}
-			fprintf(fp, "\n");
-		}
-		if(info->force) {
-			fprintf(fp, "%%FORCE%%\n\n");
-		}
-		if(local) {
-			if(info->url) {
-				fprintf(fp, "%%URL%%\n"
-								"%s\n\n", info->url);
-			}
-			if(info->licenses) {
-				fputs("%LICENSE%\n", fp);
-				for(lp = info->licenses; lp; lp = lp->next) {
-					fprintf(fp, "%s\n", (char *)lp->data);
-				}
-				fprintf(fp, "\n");
-			}
-			if(info->arch) {
-				fprintf(fp, "%%ARCH%%\n"
-								"%s\n\n", info->arch);
-			}
-			if(info->builddate) {
-				fprintf(fp, "%%BUILDDATE%%\n"
-								"%ju\n\n", (uintmax_t)info->builddate);
-			}
-			if(info->installdate) {
-				fprintf(fp, "%%INSTALLDATE%%\n"
-								"%ju\n\n", (uintmax_t)info->installdate);
-			}
-			if(info->packager) {
-				fprintf(fp, "%%PACKAGER%%\n"
-								"%s\n\n", info->packager);
-			}
-			if(info->isize) {
-				/* only write installed size, csize is irrelevant once installed */
-				fprintf(fp, "%%SIZE%%\n"
-								"%jd\n\n", (intmax_t)info->isize);
-			}
-			if(info->reason) {
-				fprintf(fp, "%%REASON%%\n"
-								"%u\n\n", info->reason);
-			}
-		} else {
-			if(info->size) {
-				fprintf(fp, "%%CSIZE%%\n"
-								"%jd\n\n", (intmax_t)info->size);
-			}
-			if(info->isize) {
-				fprintf(fp, "%%ISIZE%%\n"
-								"%jd\n\n", (intmax_t)info->isize);
-			}
-			if(info->md5sum) {
-				fprintf(fp, "%%MD5SUM%%\n"
-								"%s\n\n", info->md5sum);
-			}
-		}
-		fclose(fp);
-		fp = NULL;
-	}
-
-	/* FILES */
-	if(local && (inforeq & INFRQ_FILES)) {
-		_alpm_log(PM_LOG_DEBUG, "writing %s-%s FILES information back to db\n",
-				info->name, info->version);
-		snprintf(path, PATH_MAX, "%sfiles", pkgpath);
-		if((fp = fopen(path, "w")) == NULL) {
-			_alpm_log(PM_LOG_ERROR, _("could not open file %s: %s\n"), path, strerror(errno));
-			retval = -1;
-			goto cleanup;
-		}
-		if(info->files) {
-			fprintf(fp, "%%FILES%%\n");
-			for(lp = info->files; lp; lp = lp->next) {
-				fprintf(fp, "%s\n", (char *)lp->data);
-			}
-			fprintf(fp, "\n");
-		}
-		if(info->backup) {
-			fprintf(fp, "%%BACKUP%%\n");
-			for(lp = info->backup; lp; lp = lp->next) {
-				fprintf(fp, "%s\n", (char *)lp->data);
-			}
-			fprintf(fp, "\n");
-		}
-		fclose(fp);
-		fp = NULL;
-	}
-
-	/* DEPENDS */
-	if(inforeq & INFRQ_DEPENDS) {
-		_alpm_log(PM_LOG_DEBUG, "writing %s-%s DEPENDS information back to db\n",
-			info->name, info->version);
-		snprintf(path, PATH_MAX, "%sdepends", pkgpath);
-		if((fp = fopen(path, "w")) == NULL) {
-			_alpm_log(PM_LOG_ERROR, _("could not open file %s: %s\n"), path, strerror(errno));
-			retval = -1;
-			goto cleanup;
-		}
-		if(info->depends) {
-			fputs("%DEPENDS%\n", fp);
-			for(lp = info->depends; lp; lp = lp->next) {
-				char *depstring = alpm_dep_compute_string(lp->data);
-				fprintf(fp, "%s\n", depstring);
-				free(depstring);
-			}
-			fprintf(fp, "\n");
-		}
-		if(info->optdepends) {
-			fputs("%OPTDEPENDS%\n", fp);
-			for(lp = info->optdepends; lp; lp = lp->next) {
-				fprintf(fp, "%s\n", (char *)lp->data);
-			}
-			fprintf(fp, "\n");
-		}
-		if(info->conflicts) {
-			fputs("%CONFLICTS%\n", fp);
-			for(lp = info->conflicts; lp; lp = lp->next) {
-				fprintf(fp, "%s\n", (char *)lp->data);
-			}
-			fprintf(fp, "\n");
-		}
-		if(info->provides) {
-			fputs("%PROVIDES%\n", fp);
-			for(lp = info->provides; lp; lp = lp->next) {
-				fprintf(fp, "%s\n", (char *)lp->data);
-			}
-			fprintf(fp, "\n");
-		}
-		fclose(fp);
-		fp = NULL;
-	}
-
-	/* INSTALL */
-	/* nothing needed here (script is automatically extracted) */
-
-cleanup:
-	umask(oldmask);
-	free(pkgpath);
-
-	if(fp) {
-		fclose(fp);
-	}
-
-	return(retval);
-}
-
-int _alpm_db_remove(pmdb_t *db, pmpkg_t *info)
-{
-	int ret = 0;
-	char *pkgpath = NULL;
-
-	ALPM_LOG_FUNC;
-
-	if(db == NULL || info == NULL) {
-		RET_ERR(PM_ERR_DB_NULL, -1);
-	}
-
-	pkgpath = get_pkgpath(db, info);
-
-	ret = _alpm_rmrf(pkgpath);
-	free(pkgpath);
-	if(ret != 0) {
-		ret = -1;
-	}
-	return(ret);
-}
-
-/* vim: set ts=2 sw=2 noet: */

lib/libalpm/be_package.c

@@ -1,7 +1,7 @@
 /*
  *  be_package.c
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -24,8 +24,7 @@
 #include <stdlib.h>
 #include <string.h>
 #include <limits.h>
-#include <ctype.h>
-#include <locale.h> /* setlocale */
+#include <errno.h>
 
 /* libarchive */
 #include <archive.h>
@@ -38,6 +37,109 @@
 #include "package.h"
 #include "deps.h" /* _alpm_splitdep */
 
+/**
+ * Open a package changelog for reading. Similar to fopen in functionality,
+ * except that the returned 'file stream' is from an archive.
+ * @param pkg the package (file) to read the changelog
+ * @return a 'file stream' to the package changelog
+ */
+static void *_package_changelog_open(pmpkg_t *pkg)
+{
+	ALPM_LOG_FUNC;
+
+	ASSERT(pkg != NULL, return(NULL));
+
+	struct archive *archive = NULL;
+	struct archive_entry *entry;
+	const char *pkgfile = pkg->origin_data.file;
+
+	if((archive = archive_read_new()) == NULL) {
+		RET_ERR(PM_ERR_LIBARCHIVE, NULL);
+	}
+
+	archive_read_support_compression_all(archive);
+	archive_read_support_format_all(archive);
+
+	if (archive_read_open_filename(archive, pkgfile,
+				ARCHIVE_DEFAULT_BYTES_PER_BLOCK) != ARCHIVE_OK) {
+		RET_ERR(PM_ERR_PKG_OPEN, NULL);
+	}
+
+	while(archive_read_next_header(archive, &entry) == ARCHIVE_OK) {
+		const char *entry_name = archive_entry_pathname(entry);
+
+		if(strcmp(entry_name, ".CHANGELOG") == 0) {
+			return(archive);
+		}
+	}
+	/* we didn't find a changelog */
+	archive_read_finish(archive);
+	errno = ENOENT;
+
+	return(NULL);
+}
+
+/**
+ * Read data from an open changelog 'file stream'. Similar to fread in
+ * functionality, this function takes a buffer and amount of data to read.
+ * @param ptr a buffer to fill with raw changelog data
+ * @param size the size of the buffer
+ * @param pkg the package that the changelog is being read from
+ * @param fp a 'file stream' to the package changelog
+ * @return the number of characters read, or 0 if there is no more data
+ */
+static size_t _package_changelog_read(void *ptr, size_t size,
+		const pmpkg_t *pkg, const void *fp)
+{
+	ssize_t sret = archive_read_data((struct archive*)fp, ptr, size);
+	/* Report error (negative values) */
+	if(sret < 0) {
+		pm_errno = PM_ERR_LIBARCHIVE;
+		return(0);
+	} else {
+		return((size_t)sret);
+	}
+}
+
+/*
+static int _package_changelog_feof(const pmpkg_t *pkg, void *fp)
+{
+	// note: this doesn't quite work, no feof in libarchive
+	return( archive_read_data((struct archive*)fp, NULL, 0) );
+}
+*/
+
+/**
+ * Close a package changelog for reading. Similar to fclose in functionality,
+ * except that the 'file stream' is from an archive.
+ * @param pkg the package (file) that the changelog was read from
+ * @param fp a 'file stream' to the package changelog
+ * @return whether closing the package changelog stream was successful
+ */
+static int _package_changelog_close(const pmpkg_t *pkg, void *fp)
+{
+	return( archive_read_finish((struct archive *)fp) );
+}
+
+/** Package file operations struct accessor. We implement this as a method
+ * rather than a static struct as in be_files because we want to reuse the
+ * majority of the default_pkg_ops struct and add only a few operations of
+ * our own on top.
+ */
+static struct pkg_operations *get_file_pkg_ops(void)
+{
+	static struct pkg_operations file_pkg_ops;
+	static int file_pkg_ops_initialized = 0;
+	if(!file_pkg_ops_initialized) {
+		file_pkg_ops = default_pkg_ops;
+		file_pkg_ops.changelog_open  = _package_changelog_open;
+		file_pkg_ops.changelog_read  = _package_changelog_read;
+		file_pkg_ops.changelog_close = _package_changelog_close;
+		file_pkg_ops_initialized = 1;
+	}
+	return(&file_pkg_ops);
+}
+
 /**
  * Parses the package description file for a package into a pmpkg_t struct.
  * @param archive the archive to read from, pointed at the .PKGINFO entry
@@ -47,17 +149,22 @@
  */
 static int parse_descfile(struct archive *a, pmpkg_t *newpkg)
 {
-	char line[PATH_MAX];
 	char *ptr = NULL;
 	char *key = NULL;
 	int linenum = 0;
+	struct archive_read_buffer buf;
 
 	ALPM_LOG_FUNC;
 
-	/* loop until we reach EOF (where archive_fgets will return NULL) */
-	while(_alpm_archive_fgets(line, PATH_MAX, a) != NULL) {
+	memset(&buf, 0, sizeof(buf));
+	/* 512K for a line length seems reasonable */
+	buf.max_line_size = 512 * 1024;
+
+	/* loop until we reach EOF or other error */
+	while(_alpm_archive_fgets(a, &buf) == ARCHIVE_OK) {
+		char *line = _alpm_strtrim(buf.line);
+
 		linenum++;
-		_alpm_strtrim(line);
 		if(strlen(line) == 0 || line[0] == '#') {
 			continue;
 		}
@@ -68,53 +175,52 @@ static int parse_descfile(struct archive *a, pmpkg_t *newpkg)
 								newpkg->name ? newpkg->name : "error", linenum);
 		} else {
 			key = _alpm_strtrim(key);
+			while(*ptr == ' ') ptr++;
 			ptr = _alpm_strtrim(ptr);
-			if(!strcmp(key, "pkgname")) {
+			if(strcmp(key, "pkgname") == 0) {
 				STRDUP(newpkg->name, ptr, RET_ERR(PM_ERR_MEMORY, -1));
-			} else if(!strcmp(key, "pkgver")) {
+				newpkg->name_hash = _alpm_hash_sdbm(newpkg->name);
+			} else if(strcmp(key, "pkgbase") == 0) {
+				/* not used atm */
+			} else if(strcmp(key, "pkgver") == 0) {
 				STRDUP(newpkg->version, ptr, RET_ERR(PM_ERR_MEMORY, -1));
-			} else if(!strcmp(key, "pkgdesc")) {
+			} else if(strcmp(key, "pkgdesc") == 0) {
 				STRDUP(newpkg->desc, ptr, RET_ERR(PM_ERR_MEMORY, -1));
-			} else if(!strcmp(key, "group")) {
+			} else if(strcmp(key, "group") == 0) {
 				newpkg->groups = alpm_list_add(newpkg->groups, strdup(ptr));
-			} else if(!strcmp(key, "url")) {
+			} else if(strcmp(key, "url") == 0) {
 				STRDUP(newpkg->url, ptr, RET_ERR(PM_ERR_MEMORY, -1));
-			} else if(!strcmp(key, "license")) {
+			} else if(strcmp(key, "license") == 0) {
 				newpkg->licenses = alpm_list_add(newpkg->licenses, strdup(ptr));
-			} else if(!strcmp(key, "builddate")) {
-				char first = tolower(ptr[0]);
-				if(first > 'a' && first < 'z') {
-					struct tm tmp_tm = {0}; /* initialize to null in case of failure */
-					setlocale(LC_TIME, "C");
-					strptime(ptr, "%a %b %e %H:%M:%S %Y", &tmp_tm);
-					newpkg->builddate = mktime(&tmp_tm);
-					setlocale(LC_TIME, "");
-				} else {
-					newpkg->builddate = atol(ptr);
-				}
-			} else if(!strcmp(key, "packager")) {
+			} else if(strcmp(key, "builddate") == 0) {
+				newpkg->builddate = _alpm_parsedate(ptr);
+			} else if(strcmp(key, "packager") == 0) {
 				STRDUP(newpkg->packager, ptr, RET_ERR(PM_ERR_MEMORY, -1));
-			} else if(!strcmp(key, "arch")) {
+			} else if(strcmp(key, "arch") == 0) {
 				STRDUP(newpkg->arch, ptr, RET_ERR(PM_ERR_MEMORY, -1));
-			} else if(!strcmp(key, "size")) {
+			} else if(strcmp(key, "size") == 0) {
 				/* size in the raw package is uncompressed (installed) size */
 				newpkg->isize = atol(ptr);
-			} else if(!strcmp(key, "depend")) {
+			} else if(strcmp(key, "depend") == 0) {
 				pmdepend_t *dep = _alpm_splitdep(ptr);
 				newpkg->depends = alpm_list_add(newpkg->depends, dep);
-			} else if(!strcmp(key, "optdepend")) {
+			} else if(strcmp(key, "optdepend") == 0) {
 				newpkg->optdepends = alpm_list_add(newpkg->optdepends, strdup(ptr));
-			} else if(!strcmp(key, "conflict")) {
+			} else if(strcmp(key, "conflict") == 0) {
 				newpkg->conflicts = alpm_list_add(newpkg->conflicts, strdup(ptr));
-			} else if(!strcmp(key, "replaces")) {
+			} else if(strcmp(key, "replaces") == 0) {
 				newpkg->replaces = alpm_list_add(newpkg->replaces, strdup(ptr));
-			} else if(!strcmp(key, "provides")) {
+			} else if(strcmp(key, "provides") == 0) {
 				newpkg->provides = alpm_list_add(newpkg->provides, strdup(ptr));
-			} else if(!strcmp(key, "backup")) {
+			} else if(strcmp(key, "backup") == 0) {
 				newpkg->backup = alpm_list_add(newpkg->backup, strdup(ptr));
+			} else if(strcmp(key, "force") == 0) {
+				/* deprecated, skip it */
+			} else if(strcmp(key, "makepkgopt") == 0) {
+				/* not used atm */
 			} else {
-				_alpm_log(PM_LOG_DEBUG, "%s: syntax error in description file line %d\n",
-									newpkg->name ? newpkg->name : "error", linenum);
+				_alpm_log(PM_LOG_DEBUG, "%s: unknown key '%s' in description file line %d\n",
+									newpkg->name ? newpkg->name : "error", key, linenum);
 			}
 		}
 		line[0] = '\0';
@@ -130,7 +236,7 @@ static int parse_descfile(struct archive *a, pmpkg_t *newpkg)
  *             through the full archive
  * @return An information filled pmpkg_t struct
  */
-static pmpkg_t *pkg_load(const char *pkgfile, unsigned short full)
+static pmpkg_t *pkg_load(const char *pkgfile, int full)
 {
 	int ret = ARCHIVE_OK;
 	int config = 0;
@@ -170,6 +276,8 @@ static pmpkg_t *pkg_load(const char *pkgfile, unsigned short full)
 	newpkg->filename = strdup(pkgfile);
 	newpkg->size = st.st_size;
 
+	_alpm_log(PM_LOG_DEBUG, "starting package load for %s\n", pkgfile);
+
 	/* If full is false, only read through the archive until we find our needed
 	 * metadata. If it is true, read through the entire archive, which serves
 	 * as a verfication of integrity and allows us to create the filelist. */
@@ -198,7 +306,7 @@ static pmpkg_t *pkg_load(const char *pkgfile, unsigned short full)
 		} else if(*entry_name == '.') {
 			/* for now, ignore all files starting with '.' that haven't
 			 * already been handled (for future possibilities) */
-		} else {
+		} else if(full) {
 			/* Keep track of all files for filelist generation */
 			newpkg->files = alpm_list_add(newpkg->files, strdup(entry_name));
 		}
@@ -228,11 +336,13 @@ static pmpkg_t *pkg_load(const char *pkgfile, unsigned short full)
 		goto pkg_invalid;
 	}
 
-  archive_read_finish(archive);
+	archive_read_finish(archive);
 
 	/* internal fields for package struct */
 	newpkg->origin = PKG_FROM_FILE;
+	/* TODO eventually kill/move this? */
 	newpkg->origin_data.file = strdup(pkgfile);
+	newpkg->ops = get_file_pkg_ops();
 
 	if(full) {
 		/* "checking for conflicts" requires a sorted list, ensure that here */
@@ -243,7 +353,7 @@ static pmpkg_t *pkg_load(const char *pkgfile, unsigned short full)
 	} else {
 		/* get rid of any partial filelist we may have collected, it is invalid */
 		FREELIST(newpkg->files);
-		newpkg->infolevel = INFRQ_BASE | INFRQ_DESC | INFRQ_DEPENDS;
+		newpkg->infolevel = INFRQ_BASE | INFRQ_DESC;
 	}
 
 	return(newpkg);
@@ -267,8 +377,7 @@ error:
  * @param pkg address of the package pointer
  * @return 0 on success, -1 on error (pm_errno is set accordingly)
  */
-int SYMEXPORT alpm_pkg_load(const char *filename, unsigned short full,
-		pmpkg_t **pkg)
+int SYMEXPORT alpm_pkg_load(const char *filename, int full, pmpkg_t **pkg)
 {
 	ALPM_LOG_FUNC;
 

lib/libalpm/be_sync.c

@@ -0,0 +1,487 @@
+/*
+ *  be_sync.c
+ *
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "config.h"
+
+#include <errno.h>
+#include <limits.h>
+
+/* libarchive */
+#include <archive.h>
+#include <archive_entry.h>
+
+/* libalpm */
+#include "util.h"
+#include "log.h"
+#include "alpm.h"
+#include "alpm_list.h"
+#include "package.h"
+#include "handle.h"
+#include "delta.h"
+#include "deps.h"
+#include "dload.h"
+
+/** Update a package database
+ *
+ * An update of the package database \a db will be attempted. Unless
+ * \a force is true, the update will only be performed if the remote
+ * database was modified since the last update.
+ *
+ * A transaction is necessary for this operation, in order to obtain a
+ * database lock. During this transaction the front-end will be informed
+ * of the download progress of the database via the download callback.
+ *
+ * Example:
+ * @code
+ * alpm_list_t *syncs = alpm_option_get_syncdbs();
+ * if(alpm_trans_init(0, NULL, NULL, NULL) == 0) {
+ *     for(i = syncs; i; i = alpm_list_next(i)) {
+ *         pmdb_t *db = alpm_list_getdata(i);
+ *         result = alpm_db_update(0, db);
+ *         alpm_trans_release();
+ *
+ *         if(result < 0) {
+ *	           printf("Unable to update database: %s\n", alpm_strerrorlast());
+ *         } else if(result == 1) {
+ *             printf("Database already up to date\n");
+ *         } else {
+ *             printf("Database updated\n");
+ *         }
+ *     }
+ * }
+ * @endcode
+ *
+ * @ingroup alpm_databases
+ * @note After a successful update, the \link alpm_db_get_pkgcache()
+ * package cache \endlink will be invalidated
+ * @param force if true, then forces the update, otherwise update only in case
+ * the database isn't up to date
+ * @param db pointer to the package database to update
+ * @return 0 on success, -1 on error (pm_errno is set accordingly), 1 if up to
+ * to date
+ */
+int SYMEXPORT alpm_db_update(int force, pmdb_t *db)
+{
+	char *dbfile, *syncpath;
+	const char *dbpath;
+	struct stat buf;
+	size_t len;
+	int ret;
+
+	ALPM_LOG_FUNC;
+
+	/* Sanity checks */
+	ASSERT(handle != NULL, RET_ERR(PM_ERR_HANDLE_NULL, -1));
+	ASSERT(db != NULL && db != handle->db_local, RET_ERR(PM_ERR_WRONG_ARGS, -1));
+
+	if(!alpm_list_find_ptr(handle->dbs_sync, db)) {
+		RET_ERR(PM_ERR_DB_NOT_FOUND, -1);
+	}
+
+	len = strlen(db->treename) + 4;
+	MALLOC(dbfile, len, RET_ERR(PM_ERR_MEMORY, -1));
+	sprintf(dbfile, "%s.db", db->treename);
+
+	dbpath = alpm_option_get_dbpath();
+	len = strlen(dbpath) + 6;
+	MALLOC(syncpath, len, RET_ERR(PM_ERR_MEMORY, -1));
+	sprintf(syncpath, "%s%s", dbpath, "sync/");
+
+	if(stat(syncpath, &buf) != 0) {
+		_alpm_log(PM_LOG_DEBUG, "database dir '%s' does not exist, creating it\n",
+				syncpath);
+		if(_alpm_makepath(syncpath) != 0) {
+			free(dbfile);
+			free(syncpath);
+			RET_ERR(PM_ERR_SYSTEM, -1);
+		}
+	} else if(!S_ISDIR(buf.st_mode)) {
+		_alpm_log(PM_LOG_WARNING, _("removing invalid file: %s\n"), syncpath);
+		if(unlink(syncpath) != 0 || _alpm_makepath(syncpath) != 0) {
+			free(dbfile);
+			free(syncpath);
+			RET_ERR(PM_ERR_SYSTEM, -1);
+		}
+	}
+
+	ret = _alpm_download_single_file(dbfile, db->servers, syncpath, force);
+	free(dbfile);
+	free(syncpath);
+
+	if(ret == 1) {
+		/* files match, do nothing */
+		pm_errno = 0;
+		return(1);
+	} else if(ret == -1) {
+		/* pm_errno was set by the download code */
+		_alpm_log(PM_LOG_DEBUG, "failed to sync db: %s\n", alpm_strerrorlast());
+		return(-1);
+	}
+
+	/* Cache needs to be rebuilt */
+	_alpm_db_free_pkgcache(db);
+
+	return(0);
+}
+
+/* Forward decl so I don't reorganize the whole file right now */
+static int sync_db_read(pmdb_t *db, struct archive *archive,
+		struct archive_entry *entry, pmpkg_t *likely_pkg);
+
+/*
+ * This is the data table used to generate the estimating function below.
+ * "Weighted Avg" means averaging the bottom table values; thus each repo, big
+ * or small, will have equal influence.  "Unweighted Avg" means averaging the
+ * sums of the top table columns, thus each package has equal influence.  The
+ * final values are calculated by (surprise) averaging the averages, because
+ * why the hell not.
+ *
+ * Database   Pkgs  tar      bz2     gz      xz
+ * community  2096  5294080  256391  421227  301296
+ * core        180   460800   25257   36850   29356
+ * extra      2606  6635520  294647  470818  339392
+ * multilib    126   327680   16120   23261   18732
+ * testing      76   204800   10902   14348   12100
+ *
+ * Bytes Per Package
+ * community  2096  2525.80  122.32  200.97  143.75
+ * core        180  2560.00  140.32  204.72  163.09
+ * extra      2606  2546.25  113.06  180.67  130.23
+ * multilib    126  2600.63  127.94  184.61  148.67
+ * testing      76  2694.74  143.45  188.79  159.21
+
+ * Weighted Avg     2585.48  129.42  191.95  148.99
+ * Unweighted Avg   2543.39  118.74  190.16  137.93
+ * Average of Avgs  2564.44  124.08  191.06  143.46
+ */
+static size_t estimate_package_count(struct stat *st, struct archive *archive)
+{
+	unsigned int per_package;
+
+	switch(archive_compression(archive)) {
+		case ARCHIVE_COMPRESSION_NONE:
+			per_package = 2564;
+			break;
+		case ARCHIVE_COMPRESSION_GZIP:
+			per_package = 191;
+			break;
+		case ARCHIVE_COMPRESSION_BZIP2:
+			per_package = 124;
+			break;
+		case ARCHIVE_COMPRESSION_COMPRESS:
+			per_package = 193;
+			break;
+		case ARCHIVE_COMPRESSION_LZMA:
+		case ARCHIVE_COMPRESSION_XZ:
+			per_package = 143;
+			break;
+		case ARCHIVE_COMPRESSION_UU:
+			per_package = 3543;
+			break;
+		default:
+			/* assume it is at least somewhat compressed */
+			per_package = 200;
+	}
+	return((size_t)(st->st_size / per_package) + 1);
+}
+
+static int sync_db_populate(pmdb_t *db)
+{
+	size_t est_count;
+	int count = 0;
+	struct stat buf;
+	struct archive *archive;
+	struct archive_entry *entry;
+	pmpkg_t *pkg = NULL;
+
+	ALPM_LOG_FUNC;
+
+	ASSERT(db != NULL, RET_ERR(PM_ERR_DB_NULL, -1));
+
+	if((archive = archive_read_new()) == NULL)
+		RET_ERR(PM_ERR_LIBARCHIVE, 1);
+
+	archive_read_support_compression_all(archive);
+	archive_read_support_format_all(archive);
+
+	if(archive_read_open_filename(archive, _alpm_db_path(db),
+				ARCHIVE_DEFAULT_BYTES_PER_BLOCK) != ARCHIVE_OK) {
+		_alpm_log(PM_LOG_ERROR, _("could not open file %s: %s\n"), _alpm_db_path(db),
+				archive_error_string(archive));
+		archive_read_finish(archive);
+		RET_ERR(PM_ERR_DB_OPEN, 1);
+	}
+	if(stat(_alpm_db_path(db), &buf) != 0) {
+		RET_ERR(PM_ERR_DB_OPEN, 1);
+	}
+	est_count = estimate_package_count(&buf, archive);
+
+	/* initialize hash at 66% full */
+	db->pkgcache = _alpm_pkghash_create(est_count * 3 / 2);
+	if(db->pkgcache == NULL) {
+		RET_ERR(PM_ERR_MEMORY, -1);
+	}
+
+	while(archive_read_next_header(archive, &entry) == ARCHIVE_OK) {
+		const struct stat *st;
+
+		st = archive_entry_stat(entry);
+
+		if(S_ISDIR(st->st_mode)) {
+			const char *name;
+
+			pkg = _alpm_pkg_new();
+			if(pkg == NULL) {
+				archive_read_finish(archive);
+				RET_ERR(PM_ERR_MEMORY, -1);
+			}
+
+			name = archive_entry_pathname(entry);
+
+			if(_alpm_splitname(name, pkg) != 0) {
+				_alpm_log(PM_LOG_ERROR, _("invalid name for database entry '%s'\n"),
+						name);
+				_alpm_pkg_free(pkg);
+				continue;
+			}
+
+			/* duplicated database entries are not allowed */
+			if(_alpm_pkghash_find(db->pkgcache, pkg->name)) {
+				_alpm_log(PM_LOG_ERROR, _("duplicated database entry '%s'\n"), pkg->name);
+				_alpm_pkg_free(pkg);
+				continue;
+			}
+
+			pkg->origin = PKG_FROM_SYNCDB;
+			pkg->ops = &default_pkg_ops;
+			pkg->origin_data.db = db;
+
+			/* add to the collection */
+			_alpm_log(PM_LOG_FUNCTION, "adding '%s' to package cache for db '%s'\n",
+					pkg->name, db->treename);
+			db->pkgcache = _alpm_pkghash_add(db->pkgcache, pkg);
+			count++;
+		} else {
+			/* we have desc, depends or deltas - parse it */
+			sync_db_read(db, archive, entry, pkg);
+		}
+	}
+
+	if(count > 0) {
+		db->pkgcache->list = alpm_list_msort(db->pkgcache->list, (size_t)count, _alpm_pkg_cmp);
+	}
+	archive_read_finish(archive);
+
+	return(count);
+}
+
+#define READ_NEXT(s) do { \
+	if(_alpm_archive_fgets(archive, &buf) != ARCHIVE_OK) goto error; \
+	s = _alpm_strtrim(buf.line); \
+} while(0)
+
+#define READ_AND_STORE(f) do { \
+	READ_NEXT(line); \
+	STRDUP(f, line, goto error); \
+} while(0)
+
+#define READ_AND_STORE_ALL(f) do { \
+	char *linedup; \
+	READ_NEXT(line); \
+	if(strlen(line) == 0) break; \
+	STRDUP(linedup, line, goto error); \
+	f = alpm_list_add(f, linedup); \
+} while(1) /* note the while(1) and not (0) */
+
+static int sync_db_read(pmdb_t *db, struct archive *archive,
+		struct archive_entry *entry, pmpkg_t *likely_pkg)
+{
+	const char *entryname = NULL, *filename;
+	char *pkgname, *p, *q;
+	pmpkg_t *pkg;
+	struct archive_read_buffer buf;
+
+	ALPM_LOG_FUNC;
+
+	if(db == NULL) {
+		RET_ERR(PM_ERR_DB_NULL, -1);
+	}
+
+	if(entry != NULL) {
+		entryname = archive_entry_pathname(entry);
+	}
+	if(entryname == NULL) {
+		_alpm_log(PM_LOG_DEBUG, "invalid archive entry provided to _alpm_sync_db_read, skipping\n");
+		return(-1);
+	}
+
+	_alpm_log(PM_LOG_FUNCTION, "loading package data from archive entry %s\n",
+			entryname);
+
+	memset(&buf, 0, sizeof(buf));
+	/* 512K for a line length seems reasonable */
+	buf.max_line_size = 512 * 1024;
+
+	/* get package and db file names */
+	STRDUP(pkgname, entryname, RET_ERR(PM_ERR_MEMORY, -1));
+	p = pkgname + strlen(pkgname);
+	for(q = --p; *q && *q != '/'; q--);
+	filename = q + 1;
+	for(p = --q; *p && *p != '-'; p--);
+	for(q = --p; *q && *q != '-'; q--);
+	*q = '\0';
+
+	/* package is already in db due to parsing of directory name */
+	if(likely_pkg && strcmp(likely_pkg->name, pkgname) == 0) {
+		pkg = likely_pkg;
+	} else {
+		if(db->pkgcache == NULL) {
+			RET_ERR(PM_ERR_MEMORY, -1);
+		}
+		pkg = _alpm_pkghash_find(db->pkgcache, pkgname);
+	}
+	if(pkg == NULL) {
+		_alpm_log(PM_LOG_DEBUG, "package %s not found in %s sync database",
+					pkgname, db->treename);
+		return(-1);
+	}
+
+	if(strcmp(filename, "desc") == 0 || strcmp(filename, "depends") == 0
+			|| strcmp(filename, "deltas") == 0) {
+		while(_alpm_archive_fgets(archive, &buf) == ARCHIVE_OK) {
+			char *line = _alpm_strtrim(buf.line);
+
+			if(strcmp(line, "%NAME%") == 0) {
+				READ_NEXT(line);
+				if(strcmp(line, pkg->name) != 0) {
+					_alpm_log(PM_LOG_ERROR, _("%s database is inconsistent: name "
+								"mismatch on package %s\n"), db->treename, pkg->name);
+				}
+			} else if(strcmp(line, "%VERSION%") == 0) {
+				READ_NEXT(line);
+				if(strcmp(line, pkg->version) != 0) {
+					_alpm_log(PM_LOG_ERROR, _("%s database is inconsistent: version "
+								"mismatch on package %s\n"), db->treename, pkg->name);
+				}
+			} else if(strcmp(line, "%FILENAME%") == 0) {
+				READ_AND_STORE(pkg->filename);
+			} else if(strcmp(line, "%DESC%") == 0) {
+				READ_AND_STORE(pkg->desc);
+			} else if(strcmp(line, "%GROUPS%") == 0) {
+				READ_AND_STORE_ALL(pkg->groups);
+			} else if(strcmp(line, "%URL%") == 0) {
+				READ_AND_STORE(pkg->url);
+			} else if(strcmp(line, "%LICENSE%") == 0) {
+				READ_AND_STORE_ALL(pkg->licenses);
+			} else if(strcmp(line, "%ARCH%") == 0) {
+				READ_AND_STORE(pkg->arch);
+			} else if(strcmp(line, "%BUILDDATE%") == 0) {
+				READ_NEXT(line);
+				pkg->builddate = _alpm_parsedate(line);
+			} else if(strcmp(line, "%PACKAGER%") == 0) {
+				READ_AND_STORE(pkg->packager);
+			} else if(strcmp(line, "%CSIZE%") == 0) {
+				/* Note: the CSIZE and SIZE fields both share the "size" field in the
+				 * pkginfo_t struct. This can be done b/c CSIZE is currently only used
+				 * in sync databases, and SIZE is only used in local databases.
+				 */
+				READ_NEXT(line);
+				pkg->size = atol(line);
+				/* also store this value to isize if isize is unset */
+				if(pkg->isize == 0) {
+					pkg->isize = pkg->size;
+				}
+			} else if(strcmp(line, "%ISIZE%") == 0) {
+				READ_NEXT(line);
+				pkg->isize = atol(line);
+			} else if(strcmp(line, "%MD5SUM%") == 0) {
+				READ_AND_STORE(pkg->md5sum);
+			} else if(strcmp(line, "%REPLACES%") == 0) {
+				READ_AND_STORE_ALL(pkg->replaces);
+			} else if(strcmp(line, "%DEPENDS%") == 0) {
+				/* Different than the rest because of the _alpm_splitdep call. */
+				while(1) {
+					READ_NEXT(line);
+					if(strlen(line) == 0) break;
+					pkg->depends = alpm_list_add(pkg->depends, _alpm_splitdep(line));
+				}
+			} else if(strcmp(line, "%OPTDEPENDS%") == 0) {
+				READ_AND_STORE_ALL(pkg->optdepends);
+			} else if(strcmp(line, "%CONFLICTS%") == 0) {
+				READ_AND_STORE_ALL(pkg->conflicts);
+			} else if(strcmp(line, "%PROVIDES%") == 0) {
+				READ_AND_STORE_ALL(pkg->provides);
+			} else if(strcmp(line, "%DELTAS%") == 0) {
+				READ_AND_STORE_ALL(pkg->deltas);
+			}
+		}
+	} else if(strcmp(filename, "files") == 0) {
+		/* currently do nothing with this file */
+	} else {
+		/* unknown database file */
+		_alpm_log(PM_LOG_DEBUG, "unknown database file: %s\n", filename);
+	}
+
+error:
+	FREE(pkgname);
+	/* TODO: return 0 always? */
+	return(0);
+}
+
+static int sync_db_version(pmdb_t *db)
+{
+	return(2);
+}
+
+struct db_operations sync_db_ops = {
+	.populate         = sync_db_populate,
+	.unregister       = _alpm_db_unregister,
+	.version          = sync_db_version,
+};
+
+pmdb_t *_alpm_db_register_sync(const char *treename)
+{
+	pmdb_t *db;
+	alpm_list_t *i;
+
+	ALPM_LOG_FUNC;
+
+	for(i = handle->dbs_sync; i; i = i->next) {
+		pmdb_t *sdb = i->data;
+		if(strcmp(treename, sdb->treename) == 0) {
+			_alpm_log(PM_LOG_DEBUG, "attempt to re-register the '%s' database, using existing\n", sdb->treename);
+			return sdb;
+		}
+	}
+
+	_alpm_log(PM_LOG_DEBUG, "registering sync database '%s'\n", treename);
+
+	db = _alpm_db_new(treename, 0);
+	if(db == NULL) {
+		RET_ERR(PM_ERR_DB_CREATE, NULL);
+	}
+	db->ops = &sync_db_ops;
+
+	handle->dbs_sync = alpm_list_add(handle->dbs_sync, db);
+	return(db);
+}
+
+
+/* vim: set ts=2 sw=2 noet: */

lib/libalpm/cache.c

@@ -1,291 +0,0 @@
-/*
- *  cache.c
- *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
- *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "config.h"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <string.h>
-
-/* libalpm */
-#include "cache.h"
-#include "alpm_list.h"
-#include "log.h"
-#include "alpm.h"
-#include "util.h"
-#include "package.h"
-#include "group.h"
-#include "db.h"
-
-/* Returns a new package cache from db.
- * It frees the cache if it already exists.
- */
-int _alpm_db_load_pkgcache(pmdb_t *db)
-{
-	ALPM_LOG_FUNC;
-
-	if(db == NULL) {
-		return(-1);
-	}
-	_alpm_db_free_pkgcache(db);
-
-	_alpm_log(PM_LOG_DEBUG, "loading package cache for repository '%s'\n",
-			db->treename);
-	if(_alpm_db_populate(db) == -1) {
-		_alpm_log(PM_LOG_DEBUG,
-				"failed to load package cache for repository '%s'\n", db->treename);
-		return(-1);
-	}
-
-	db->pkgcache_loaded = 1;
-	return(0);
-}
-
-void _alpm_db_free_pkgcache(pmdb_t *db)
-{
-	ALPM_LOG_FUNC;
-
-	if(db == NULL || !db->pkgcache_loaded) {
-		return;
-	}
-
-	_alpm_log(PM_LOG_DEBUG, "freeing package cache for repository '%s'\n",
-	                        db->treename);
-
-	alpm_list_free_inner(db->pkgcache, (alpm_list_fn_free)_alpm_pkg_free);
-	alpm_list_free(db->pkgcache);
-	db->pkgcache = NULL;
-	db->pkgcache_loaded = 0;
-
-	_alpm_db_free_grpcache(db);
-}
-
-alpm_list_t *_alpm_db_get_pkgcache(pmdb_t *db)
-{
-	ALPM_LOG_FUNC;
-
-	if(db == NULL) {
-		return(NULL);
-	}
-
-	if(!db->pkgcache_loaded) {
-		_alpm_db_load_pkgcache(db);
-	}
-
-	/* hmmm, still NULL ?*/
-	if(!db->pkgcache) {
-		_alpm_log(PM_LOG_DEBUG, "warning: pkgcache is NULL for db '%s'\n", db->treename);
-	}
-
-	return(db->pkgcache);
-}
-
-/* "duplicate" pkg with BASE info (to spare some memory) then add it to pkgcache */
-int _alpm_db_add_pkgincache(pmdb_t *db, pmpkg_t *pkg)
-{
-	pmpkg_t *newpkg;
-
-	ALPM_LOG_FUNC;
-
-	if(db == NULL || !db->pkgcache_loaded || pkg == NULL) {
-		return(-1);
-	}
-
-	newpkg = _alpm_pkg_new();
-	if(newpkg == NULL) {
-		return(-1);
-	}
-	newpkg->name = strdup(pkg->name);
-	newpkg->version = strdup(pkg->version);
-	if(newpkg->name == NULL || newpkg->version == NULL) {
-		pm_errno = PM_ERR_MEMORY;
-		_alpm_pkg_free(newpkg);
-		return(-1);
-	}
-	newpkg->origin = PKG_FROM_CACHE;
-	newpkg->origin_data.db = db;
-	newpkg->infolevel = INFRQ_BASE; 
-
-	_alpm_log(PM_LOG_DEBUG, "adding entry '%s' in '%s' cache\n",
-						alpm_pkg_get_name(newpkg), db->treename);
-	db->pkgcache = alpm_list_add_sorted(db->pkgcache, newpkg, _alpm_pkg_cmp);
-
-	_alpm_db_free_grpcache(db);
-
-	return(0);
-}
-
-int _alpm_db_remove_pkgfromcache(pmdb_t *db, pmpkg_t *pkg)
-{
-	void *vdata;
-	pmpkg_t *data;
-
-	ALPM_LOG_FUNC;
-
-	if(db == NULL || !db->pkgcache_loaded || pkg == NULL) {
-		return(-1);
-	}
-
-	_alpm_log(PM_LOG_DEBUG, "removing entry '%s' from '%s' cache\n",
-						alpm_pkg_get_name(pkg), db->treename);
-
-	db->pkgcache = alpm_list_remove(db->pkgcache, pkg, _alpm_pkg_cmp, &vdata);
-	data = vdata;
-	if(data == NULL) {
-		/* package not found */
-		_alpm_log(PM_LOG_DEBUG, "cannot remove entry '%s' from '%s' cache: not found\n",
-							alpm_pkg_get_name(pkg), db->treename);
-		return(-1);
-	}
-
-	_alpm_pkg_free(data);
-
-	_alpm_db_free_grpcache(db);
-
-	return(0);
-}
-
-pmpkg_t *_alpm_db_get_pkgfromcache(pmdb_t *db, const char *target)
-{
-	ALPM_LOG_FUNC;
-
-	if(db == NULL) {
-		return(NULL);
-	}
-
-	alpm_list_t *pkgcache = _alpm_db_get_pkgcache(db);
-	if(!pkgcache) {
-		_alpm_log(PM_LOG_DEBUG, "warning: failed to get '%s' from NULL pkgcache\n",
-				target);
-		return(NULL);
-	}
-
-	return(_alpm_pkg_find(pkgcache, target));
-}
-
-/* Returns a new group cache from db.
- */
-int _alpm_db_load_grpcache(pmdb_t *db)
-{
-	alpm_list_t *lp;
-
-	ALPM_LOG_FUNC;
-
-	if(db == NULL) {
-		return(-1);
-	}
-
-	_alpm_log(PM_LOG_DEBUG, "loading group cache for repository '%s'\n",
-			db->treename);
-
-	for(lp = _alpm_db_get_pkgcache(db); lp; lp = lp->next) {
-		const alpm_list_t *i;
-		pmpkg_t *pkg = lp->data;
-
-		for(i = alpm_pkg_get_groups(pkg); i; i = i->next) {
-			const char *grpname = i->data;
-			alpm_list_t *j;
-			pmgrp_t *grp = NULL;
-			int found = 0;
-
-			/* first look through the group cache for a group with this name */
-			for(j = db->grpcache; j; j = j->next) {
-				grp = j->data;
-
-				if(strcmp(grp->name, grpname) == 0
-						&& !alpm_list_find_ptr(grp->packages, pkg)) {
-					grp->packages = alpm_list_add(grp->packages, pkg);
-					found = 1;
-					break;
-				}
-			}
-			if(found) {
-				continue;
-			}
-			/* we didn't find the group, so create a new one with this name */
-			grp = _alpm_grp_new(grpname);
-			grp->packages = alpm_list_add(grp->packages, pkg);
-			db->grpcache = alpm_list_add(db->grpcache, grp);
-		}
-	}
-
-	db->grpcache_loaded = 1;
-	return(0);
-}
-
-void _alpm_db_free_grpcache(pmdb_t *db)
-{
-	alpm_list_t *lg;
-
-	ALPM_LOG_FUNC;
-
-	if(db == NULL || !db->grpcache_loaded) {
-		return;
-	}
-
-	_alpm_log(PM_LOG_DEBUG, "freeing group cache for repository '%s'\n",
-	                        db->treename);
-
-	for(lg = db->grpcache; lg; lg = lg->next) {
-		_alpm_grp_free(lg->data);
-		lg->data = NULL;
-	}
-	FREELIST(db->grpcache);
-	db->grpcache_loaded = 0;
-}
-
-alpm_list_t *_alpm_db_get_grpcache(pmdb_t *db)
-{
-	ALPM_LOG_FUNC;
-
-	if(db == NULL) {
-		return(NULL);
-	}
-
-	if(!db->grpcache_loaded) {
-		_alpm_db_load_grpcache(db);
-	}
-
-	return(db->grpcache);
-}
-
-pmgrp_t *_alpm_db_get_grpfromcache(pmdb_t *db, const char *target)
-{
-	alpm_list_t *i;
-
-	ALPM_LOG_FUNC;
-
-	if(db == NULL || target == NULL || strlen(target) == 0) {
-		return(NULL);
-	}
-
-	for(i = _alpm_db_get_grpcache(db); i; i = i->next) {
-		pmgrp_t *info = i->data;
-
-		if(strcmp(info->name, target) == 0) {
-			return(info);
-		}
-	}
-
-	return(NULL);
-}
-
-/* vim: set ts=2 sw=2 noet: */

lib/libalpm/cache.h

@@ -1,44 +0,0 @@
-/*
- *  cache.h
- *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
- *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-#ifndef _ALPM_CACHE_H
-#define _ALPM_CACHE_H
-
-#include "db.h"
-#include "alpm_list.h"
-#include "group.h"
-#include "package.h"
-
-/* packages */
-int _alpm_db_load_pkgcache(pmdb_t *db);
-void _alpm_db_free_pkgcache(pmdb_t *db);
-int _alpm_db_add_pkgincache(pmdb_t *db, pmpkg_t *pkg);
-int _alpm_db_remove_pkgfromcache(pmdb_t *db, pmpkg_t *pkg);
-alpm_list_t *_alpm_db_get_pkgcache(pmdb_t *db);
-int _alpm_db_ensure_pkgcache(pmdb_t *db, pmdbinfrq_t infolevel);
-pmpkg_t *_alpm_db_get_pkgfromcache(pmdb_t *db, const char *target);
-/* groups */
-int _alpm_db_load_grpcache(pmdb_t *db);
-void _alpm_db_free_grpcache(pmdb_t *db);
-alpm_list_t *_alpm_db_get_grpcache(pmdb_t *db);
-pmgrp_t *_alpm_db_get_grpfromcache(pmdb_t *db, const char *target);
-
-#endif /* _ALPM_CACHE_H */
-
-/* vim: set ts=2 sw=2 noet: */

lib/libalpm/conflict.c

@@ -1,7 +1,7 @@
 /*
  *  conflict.c
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *  Copyright (c) 2005 by Aurelien Foret <orelien@chez.com>
  *  Copyright (c) 2006 by David Kimpe <dnaku@frugalware.org>
@@ -38,10 +38,10 @@
 #include "trans.h"
 #include "util.h"
 #include "log.h"
-#include "cache.h"
 #include "deps.h"
 
-pmconflict_t *_alpm_conflict_new(const char *package1, const char *package2)
+pmconflict_t *_alpm_conflict_new(const char *package1, const char *package2,
+		const char *reason)
 {
 	pmconflict_t *conflict;
 
@@ -51,6 +51,7 @@ pmconflict_t *_alpm_conflict_new(const char *package1, const char *package2)
 
 	STRDUP(conflict->package1, package1, RET_ERR(PM_ERR_MEMORY, NULL));
 	STRDUP(conflict->package2, package2, RET_ERR(PM_ERR_MEMORY, NULL));
+	STRDUP(conflict->reason, reason, RET_ERR(PM_ERR_MEMORY, NULL));
 
 	return(conflict);
 }
@@ -59,6 +60,7 @@ void _alpm_conflict_free(pmconflict_t *conflict)
 {
 	FREE(conflict->package2);
 	FREE(conflict->package1);
+	FREE(conflict->reason);
 	FREE(conflict);
 }
 
@@ -69,24 +71,25 @@ pmconflict_t *_alpm_conflict_dup(const pmconflict_t *conflict)
 
 	STRDUP(newconflict->package1, conflict->package1, RET_ERR(PM_ERR_MEMORY, NULL));
 	STRDUP(newconflict->package2, conflict->package2, RET_ERR(PM_ERR_MEMORY, NULL));
+	STRDUP(newconflict->reason, conflict->reason, RET_ERR(PM_ERR_MEMORY, NULL));
 
 	return(newconflict);
 }
 
-int _alpm_conflict_isin(pmconflict_t *needle, alpm_list_t *haystack)
+static int conflict_isin(pmconflict_t *needle, alpm_list_t *haystack)
 {
 	alpm_list_t *i;
+	const char *npkg1 = needle->package1;
+	const char *npkg2 = needle->package2;
 
 	ALPM_LOG_FUNC;
 
 	for(i = haystack; i; i = i->next) {
 		pmconflict_t *conflict = i->data;
-		char *cpkg1 = conflict->package1;
-		char *cpkg2 = conflict->package2;
-		char *npkg1 = needle->package1;
-		char *npkg2 = needle->package2;
-		if((!strcmp(cpkg1, npkg1)  && !strcmp(cpkg2, npkg2))
-				|| (!strcmp(cpkg1, npkg2) && !strcmp(cpkg2, npkg1))) {
+		const char *cpkg1 = conflict->package1;
+		const char *cpkg2 = conflict->package2;
+		if((strcmp(cpkg1, npkg1) == 0  && strcmp(cpkg2, npkg2) == 0)
+				|| (strcmp(cpkg1, npkg2) == 0 && strcmp(cpkg2, npkg1) == 0)) {
 			return(1);
 		}
 	}
@@ -94,38 +97,18 @@ int _alpm_conflict_isin(pmconflict_t *needle, alpm_list_t *haystack)
 	return(0);
 }
 
-/** Check if pkg1 conflicts with pkg2
- * @param pkg1 package we are looking at
- * @param conflict name of the possible conflict
- * @param pkg2 package to check
- * @return 0 for no conflict, non-zero otherwise
- */
-static int does_conflict(pmpkg_t *pkg1, const char *conflict, pmpkg_t *pkg2)
-{
-	const char *pkg1name = alpm_pkg_get_name(pkg1);
-	const char *pkg2name = alpm_pkg_get_name(pkg2);
-	pmdepend_t *conf = _alpm_splitdep(conflict);
-	int match = 0;
-
-	match = alpm_depcmp(pkg2, conf);
-	if(match) {
-		_alpm_log(PM_LOG_DEBUG, "package %s conflicts with %s (by %s)\n",
-				pkg1name, pkg2name, conflict);
-	}
-	_alpm_dep_free(conf);
-	return(match);
-}
-
 /** Adds the pkg1/pkg2 conflict to the baddeps list
  * @param *baddeps list to add conflict to
  * @param pkg1 first package
  * @param pkg2 package causing conflict
  */
 static void add_conflict(alpm_list_t **baddeps, const char *pkg1,
-		const char *pkg2)
+		const char *pkg2, const char *reason)
 {
-	pmconflict_t *conflict = _alpm_conflict_new(pkg1, pkg2);
-	if(conflict && !_alpm_conflict_isin(conflict, *baddeps)) {
+	pmconflict_t *conflict = _alpm_conflict_new(pkg1, pkg2, reason);
+	_alpm_log(PM_LOG_DEBUG, "package %s conflicts with %s (by %s)\n",
+			pkg1, pkg2, reason);
+	if(conflict && !conflict_isin(conflict, *baddeps)) {
 		*baddeps = alpm_list_add(*baddeps, conflict);
 	} else {
 		_alpm_conflict_free(conflict);
@@ -156,6 +139,7 @@ static void check_conflict(alpm_list_t *list1, alpm_list_t *list2,
 
 		for(j = alpm_pkg_get_conflicts(pkg1); j; j = j->next) {
 			const char *conflict = j->data;
+			pmdepend_t *parsed_conflict = _alpm_splitdep(conflict);
 
 			for(k = list2; k; k = k->next) {
 				pmpkg_t *pkg2 = k->data;
@@ -166,14 +150,15 @@ static void check_conflict(alpm_list_t *list1, alpm_list_t *list2,
 					continue;
 				}
 
-				if(does_conflict(pkg1, conflict, pkg2)) {
+				if(_alpm_depcmp(pkg2, parsed_conflict)) {
 					if(order >= 0) {
-						add_conflict(baddeps, pkg1name, pkg2name);
+						add_conflict(baddeps, pkg1name, pkg2name, conflict);
 					} else {
-						add_conflict(baddeps, pkg2name, pkg1name);
+						add_conflict(baddeps, pkg2name, pkg1name, conflict);
 					}
 				}
 			}
+			_alpm_dep_free(parsed_conflict);
 		}
 	}
 }
@@ -205,8 +190,8 @@ alpm_list_t *_alpm_outerconflicts(pmdb_t *db, alpm_list_t *packages)
 		return(NULL);
 	}
 
-	alpm_list_t *dblist = alpm_list_diff(_alpm_db_get_pkgcache(db), packages,
-			_alpm_pkg_cmp);
+	alpm_list_t *dblist = alpm_list_diff(_alpm_db_get_pkgcache(db),
+			packages, _alpm_pkg_cmp);
 
 	/* two checks to be done here for conflicts */
 	_alpm_log(PM_LOG_DEBUG, "check targets vs db\n");
@@ -318,7 +303,7 @@ static alpm_list_t *chk_filedifference(alpm_list_t *filesA, alpm_list_t *filesB)
  */
 static alpm_list_t *add_fileconflict(alpm_list_t *conflicts,
                     pmfileconflicttype_t type, const char *filestr,
-										const char* name1, const char* name2)
+                    const char* name1, const char* name2)
 {
 	pmfileconflict_t *conflict;
 	MALLOC(conflict, sizeof(pmfileconflict_t), RET_ERR(PM_ERR_MEMORY, NULL));
@@ -381,7 +366,7 @@ static int dir_belongsto_pkg(char *dirpath, pmpkg_t *pkg)
 				return(0);
 			}
 		} else {
-			if(alpm_list_find_str(alpm_pkg_get_files(pkg),path)) {
+			if(alpm_list_find_str(alpm_pkg_get_files(pkg), path)) {
 				continue;
 			} else {
 				closedir(dir);
@@ -400,12 +385,12 @@ alpm_list_t *_alpm_db_find_fileconflicts(pmdb_t *db, pmtrans_t *trans,
 		alpm_list_t *upgrade, alpm_list_t *remove)
 {
 	alpm_list_t *i, *j, *conflicts = NULL;
-	int numtargs = alpm_list_count(upgrade);
-	int current;
+	size_t numtargs = alpm_list_count(upgrade);
+	size_t current;
 
 	ALPM_LOG_FUNC;
 
-	if(db == NULL || upgrade == NULL) {
+	if(db == NULL || upgrade == NULL || trans == NULL) {
 		return(NULL);
 	}
 
@@ -413,7 +398,7 @@ alpm_list_t *_alpm_db_find_fileconflicts(pmdb_t *db, pmtrans_t *trans,
 	 * be possible with real transactions. Right now we only do half as much
 	 * here as we do when we actually extract files in add.c with our 12
 	 * different cases. */
-	for(current = 1, i = upgrade; i; i = i->next, current++) {
+	for(current = 0, i = upgrade; i; i = i->next, current++) {
 		alpm_list_t *k, *tmpfiles = NULL;
 		pmpkg_t *p1, *p2, *dbpkg;
 		char path[PATH_MAX+1];
@@ -423,8 +408,8 @@ alpm_list_t *_alpm_db_find_fileconflicts(pmdb_t *db, pmtrans_t *trans,
 			continue;
 		}
 
-		double percent = (double)current / numtargs;
-		PROGRESS(trans, PM_TRANS_PROGRESS_CONFLICTS_START, "", (percent * 100),
+		int percent = (current * 100) / numtargs;
+		PROGRESS(trans, PM_TRANS_PROGRESS_CONFLICTS_START, "", percent,
 		         numtargs, current);
 		/* CHECK 1: check every target against every target */
 		_alpm_log(PM_LOG_DEBUG, "searching for file conflicts: %s\n",
@@ -513,7 +498,7 @@ alpm_list_t *_alpm_db_find_fileconflicts(pmdb_t *db, pmtrans_t *trans,
 					/* skip removal of file, but not add. this will prevent a second
 					 * package from removing the file when it was already installed
 					 * by its new owner (whether the file is in backup array or not */
-					trans->skip_remove = alpm_list_add(trans->skip_remove, strdup(path));
+					trans->skip_remove = alpm_list_add(trans->skip_remove, strdup(filestr));
 					_alpm_log(PM_LOG_DEBUG, "file changed packages, adding to remove skiplist: %s\n", filestr);
 					resolved_conflict = 1;
 				}
@@ -552,6 +537,8 @@ alpm_list_t *_alpm_db_find_fileconflicts(pmdb_t *db, pmtrans_t *trans,
 		}
 		FREELIST(tmpfiles);
 	}
+	PROGRESS(trans, PM_TRANS_PROGRESS_CONFLICTS_START, "", 100,
+			numtargs, current);
 
 	return(conflicts);
 }
@@ -578,6 +565,17 @@ const char SYMEXPORT *alpm_conflict_get_package2(pmconflict_t *conflict)
 	return conflict->package2;
 }
 
+const char SYMEXPORT *alpm_conflict_get_reason(pmconflict_t *conflict)
+{
+	ALPM_LOG_FUNC;
+
+	/* Sanity checks */
+	ASSERT(handle != NULL, return(NULL));
+	ASSERT(conflict != NULL, return(NULL));
+
+	return conflict->reason;
+}
+
 const char SYMEXPORT *alpm_fileconflict_get_target(pmfileconflict_t *conflict)
 {
 	ALPM_LOG_FUNC;

lib/libalpm/conflict.h

@@ -1,7 +1,7 @@
 /*
  *  conflict.h
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -27,6 +27,7 @@
 struct __pmconflict_t {
 	char *package1;
 	char *package2;
+	char *reason;
 };
 
 struct __pmfileconflict_t {
@@ -36,10 +37,9 @@ struct __pmfileconflict_t {
 	char *ctarget;
 };
 
-pmconflict_t *_alpm_conflict_new(const char *package1, const char *package2);
+pmconflict_t *_alpm_conflict_new(const char *package1, const char *package2, const char *reason);
 pmconflict_t *_alpm_conflict_dup(const pmconflict_t *conflict);
 void _alpm_conflict_free(pmconflict_t *conflict);
-int _alpm_conflict_isin(pmconflict_t *needle, alpm_list_t *haystack);
 alpm_list_t *_alpm_innerconflicts(alpm_list_t *packages);
 alpm_list_t *_alpm_outerconflicts(pmdb_t *db, alpm_list_t *packages);
 alpm_list_t *_alpm_db_find_fileconflicts(pmdb_t *db, pmtrans_t *trans,

lib/libalpm/db.c

@@ -1,7 +1,7 @@
 /*
  *  db.c
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *  Copyright (c) 2005 by Aurelien Foret <orelien@chez.com>
  *  Copyright (c) 2005 by Christian Hamar <krics@linuxforum.hu>
@@ -29,7 +29,6 @@
 #include <errno.h>
 #include <string.h>
 #include <sys/stat.h>
-#include <dirent.h>
 #include <regex.h>
 #include <time.h>
 
@@ -39,8 +38,9 @@
 #include "log.h"
 #include "util.h"
 #include "handle.h"
-#include "cache.h"
 #include "alpm.h"
+#include "package.h"
+#include "group.h"
 
 /** \addtogroup alpm_databases Database Functions
  * @brief Functions to query and manipulate the database of libalpm
@@ -64,23 +64,8 @@ pmdb_t SYMEXPORT *alpm_db_register_sync(const char *treename)
 	return(_alpm_db_register_sync(treename));
 }
 
-/** Register the local package database.
- * @return a pmdb_t* representing the local database, or NULL on error
- */
-pmdb_t SYMEXPORT *alpm_db_register_local(void)
-{
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, RET_ERR(PM_ERR_HANDLE_NULL, NULL));
-	/* Do not register a database if a transaction is on-going */
-	ASSERT(handle->trans == NULL, RET_ERR(PM_ERR_TRANS_NOT_NULL, NULL));
-
-	return(_alpm_db_register_local());
-}
-
 /* Helper function for alpm_db_unregister{_all} */
-static void _alpm_db_unregister(pmdb_t *db)
+void _alpm_db_unregister(pmdb_t *db)
 {
 	if(db == NULL) {
 		return;
@@ -96,6 +81,7 @@ static void _alpm_db_unregister(pmdb_t *db)
 int SYMEXPORT alpm_db_unregister_all(void)
 {
 	alpm_list_t *i;
+	pmdb_t *db;
 
 	ALPM_LOG_FUNC;
 
@@ -105,13 +91,16 @@ int SYMEXPORT alpm_db_unregister_all(void)
 	ASSERT(handle->trans == NULL, RET_ERR(PM_ERR_TRANS_NOT_NULL, -1));
 
 	/* close local database */
-	_alpm_db_unregister(handle->db_local);
-	handle->db_local = NULL;
+	db = handle->db_local;
+	if(db) {
+		db->ops->unregister(db);
+		handle->db_local = NULL;
+	}
 
 	/* and also sync ones */
 	for(i = handle->dbs_sync; i; i = i->next) {
-		pmdb_t *db = i->data;
-		_alpm_db_unregister(db);
+		db = i->data;
+		db->ops->unregister(db);
 		i->data = NULL;
 	}
 	FREELIST(handle->dbs_sync);
@@ -154,7 +143,7 @@ int SYMEXPORT alpm_db_unregister(pmdb_t *db)
 		RET_ERR(PM_ERR_DB_NOT_FOUND, -1);
 	}
 
-	_alpm_db_unregister(db);
+	db->ops->unregister(db);
 	return(0);
 }
 
@@ -168,7 +157,7 @@ int SYMEXPORT alpm_db_setserver(pmdb_t *db, const char *url)
 	alpm_list_t *i;
 	int found = 0;
 	char *newurl;
-	int len = 0;
+	size_t len = 0;
 
 	ALPM_LOG_FUNC;
 
@@ -321,20 +310,51 @@ alpm_list_t SYMEXPORT *alpm_db_search(pmdb_t *db, const alpm_list_t* needles)
 	return(_alpm_db_search(db, needles));
 }
 
+/** Set install reason for a package in db
+ * @param db pointer to the package database
+ * @param name the name of the package
+ * @param reason the new install reason
+ * @return 0 on success, -1 on error (pm_errno is set accordingly)
+ */
+int SYMEXPORT alpm_db_set_pkgreason(pmdb_t *db, const char *name, pmpkgreason_t reason)
+{
+	ALPM_LOG_FUNC;
+
+	/* Sanity checks */
+	ASSERT(handle != NULL, RET_ERR(PM_ERR_HANDLE_NULL, -1));
+	ASSERT(db != NULL && name != NULL, RET_ERR(PM_ERR_WRONG_ARGS, -1));
+
+	pmpkg_t *pkg = _alpm_db_get_pkgfromcache(db, name);
+	if(pkg == NULL) {
+		RET_ERR(PM_ERR_PKG_NOT_FOUND, -1);
+	}
+
+	_alpm_log(PM_LOG_DEBUG, "setting install reason %u for %s/%s\n", reason, db->treename, name);
+	if(alpm_pkg_get_reason(pkg) == reason) {
+		/* we are done */
+		return(0);
+	}
+	/* set reason (in pkgcache) */
+	pkg->reason = reason;
+	/* write DESC */
+	if(_alpm_local_db_write(db, pkg, INFRQ_DESC)) {
+		return(-1);
+	}
+
+	return(0);
+}
+
 /** @} */
 
-pmdb_t *_alpm_db_new(const char *dbpath, const char *treename)
+pmdb_t *_alpm_db_new(const char *treename, int is_local)
 {
 	pmdb_t *db;
-	const size_t pathsize = strlen(dbpath) + strlen(treename) + 2;
 
 	ALPM_LOG_FUNC;
 
 	CALLOC(db, 1, sizeof(pmdb_t), RET_ERR(PM_ERR_MEMORY, NULL));
-	CALLOC(db->path, 1, pathsize, RET_ERR(PM_ERR_MEMORY, NULL));
-
-	sprintf(db->path, "%s%s/", dbpath, treename);
 	STRDUP(db->treename, treename, RET_ERR(PM_ERR_MEMORY, NULL));
+	db->is_local = is_local;
 
 	return(db);
 }
@@ -347,13 +367,52 @@ void _alpm_db_free(pmdb_t *db)
 	_alpm_db_free_pkgcache(db);
 	/* cleanup server list */
 	FREELIST(db->servers);
-	FREE(db->path);
+	FREE(db->_path);
 	FREE(db->treename);
 	FREE(db);
 
 	return;
 }
 
+const char *_alpm_db_path(pmdb_t *db)
+{
+	if(!db) {
+		return(NULL);
+	}
+	if(!db->_path) {
+		const char *dbpath;
+		size_t pathsize;
+
+		dbpath = alpm_option_get_dbpath();
+		if(!dbpath) {
+			_alpm_log(PM_LOG_ERROR, _("database path is undefined\n"));
+			RET_ERR(PM_ERR_DB_OPEN, NULL);
+		}
+
+		if(db->is_local) {
+			pathsize = strlen(dbpath) + strlen(db->treename) + 2;
+			CALLOC(db->_path, 1, pathsize, RET_ERR(PM_ERR_MEMORY, NULL));
+			sprintf(db->_path, "%s%s/", dbpath, db->treename);
+		} else {
+			pathsize = strlen(dbpath) + 5 + strlen(db->treename) + 4;
+			CALLOC(db->_path, 1, pathsize, RET_ERR(PM_ERR_MEMORY, NULL));
+			/* all sync DBs now reside in the sync/ subdir of the dbpath */
+			sprintf(db->_path, "%ssync/%s.db", dbpath, db->treename);
+		}
+		_alpm_log(PM_LOG_DEBUG, "database path for tree %s set to %s\n",
+				db->treename, db->_path);
+	}
+	return(db->_path);
+}
+
+int _alpm_db_version(pmdb_t *db)
+{
+	if(!db) {
+		return(-1);
+	}
+	return(db->ops->version(db));
+}
+
 int _alpm_db_cmp(const void *d1, const void *d2)
 {
 	pmdb_t *db1 = (pmdb_t *)d1;
@@ -437,69 +496,258 @@ alpm_list_t *_alpm_db_search(pmdb_t *db, const alpm_list_t *needles)
 	return(ret);
 }
 
-pmdb_t *_alpm_db_register_local(void)
+/* Returns a new package cache from db.
+ * It frees the cache if it already exists.
+ */
+int _alpm_db_load_pkgcache(pmdb_t *db)
 {
-	pmdb_t *db;
-	const char *dbpath;
+	ALPM_LOG_FUNC;
+
+	if(db == NULL) {
+		return(-1);
+	}
+	_alpm_db_free_pkgcache(db);
+
+	_alpm_log(PM_LOG_DEBUG, "loading package cache for repository '%s'\n",
+			db->treename);
+	if(db->ops->populate(db) == -1) {
+		_alpm_log(PM_LOG_DEBUG,
+				"failed to load package cache for repository '%s'\n", db->treename);
+		return(-1);
+	}
+
+	db->pkgcache_loaded = 1;
+	return(0);
+}
+
+void _alpm_db_free_pkgcache(pmdb_t *db)
+{
+	ALPM_LOG_FUNC;
+
+	if(db == NULL || !db->pkgcache_loaded) {
+		return;
+	}
+
+	_alpm_log(PM_LOG_DEBUG, "freeing package cache for repository '%s'\n",
+	                        db->treename);
+
+	alpm_list_free_inner(_alpm_db_get_pkgcache(db),
+				(alpm_list_fn_free)_alpm_pkg_free);
+	_alpm_pkghash_free(db->pkgcache);
+	db->pkgcache_loaded = 0;
+
+	_alpm_db_free_grpcache(db);
+}
+
+pmpkghash_t *_alpm_db_get_pkgcache_hash(pmdb_t *db)
+{
+	ALPM_LOG_FUNC;
+
+	if(db == NULL) {
+		return(NULL);
+	}
+
+	if(!db->pkgcache_loaded) {
+		_alpm_db_load_pkgcache(db);
+	}
+
+	/* hmmm, still NULL ?*/
+	if(!db->pkgcache) {
+		_alpm_log(PM_LOG_DEBUG, "warning: pkgcache is NULL for db '%s'\n", db->treename);
+	}
+
+	return(db->pkgcache);
+}
+
+alpm_list_t *_alpm_db_get_pkgcache(pmdb_t *db)
+{
+	ALPM_LOG_FUNC;
+
+	pmpkghash_t *hash = _alpm_db_get_pkgcache_hash(db);
+
+	if(hash == NULL) {
+		return(NULL);
+	}
+
+	return(hash->list);
+}
+
+/* "duplicate" pkg then add it to pkgcache */
+int _alpm_db_add_pkgincache(pmdb_t *db, pmpkg_t *pkg)
+{
+	pmpkg_t *newpkg;
 
 	ALPM_LOG_FUNC;
 
-	if(handle->db_local != NULL) {
-		_alpm_log(PM_LOG_WARNING, _("attempt to re-register the 'local' DB\n"));
-		RET_ERR(PM_ERR_DB_NOT_NULL, NULL);
+	if(db == NULL || !db->pkgcache_loaded || pkg == NULL) {
+		return(-1);
 	}
 
-	_alpm_log(PM_LOG_DEBUG, "registering local database\n");
-
-	dbpath = alpm_option_get_dbpath();
-	if(!dbpath) {
-		_alpm_log(PM_LOG_ERROR, _("database path is undefined\n"));
-			RET_ERR(PM_ERR_DB_OPEN, NULL);
+	newpkg = _alpm_pkg_dup(pkg);
+	if(newpkg == NULL) {
+		return(-1);
 	}
 
-	db = _alpm_db_new(dbpath, "local");
-	if(db == NULL) {
-		RET_ERR(PM_ERR_DB_CREATE, NULL);
-	}
+	_alpm_log(PM_LOG_DEBUG, "adding entry '%s' in '%s' cache\n",
+						alpm_pkg_get_name(newpkg), db->treename);
+	db->pkgcache = _alpm_pkghash_add_sorted(db->pkgcache, newpkg);
 
-	handle->db_local = db;
-	return(db);
+	_alpm_db_free_grpcache(db);
+
+	return(0);
 }
 
-pmdb_t *_alpm_db_register_sync(const char *treename)
+int _alpm_db_remove_pkgfromcache(pmdb_t *db, pmpkg_t *pkg)
+{
+	pmpkg_t *data = NULL;
+
+	ALPM_LOG_FUNC;
+
+	if(db == NULL || !db->pkgcache_loaded || pkg == NULL) {
+		return(-1);
+	}
+
+	_alpm_log(PM_LOG_DEBUG, "removing entry '%s' from '%s' cache\n",
+						alpm_pkg_get_name(pkg), db->treename);
+
+	db->pkgcache = _alpm_pkghash_remove(db->pkgcache, pkg, &data);
+	if(data == NULL) {
+		/* package not found */
+		_alpm_log(PM_LOG_DEBUG, "cannot remove entry '%s' from '%s' cache: not found\n",
+							alpm_pkg_get_name(pkg), db->treename);
+		return(-1);
+	}
+
+	_alpm_pkg_free(data);
+
+	_alpm_db_free_grpcache(db);
+
+	return(0);
+}
+
+pmpkg_t *_alpm_db_get_pkgfromcache(pmdb_t *db, const char *target)
+{
+	ALPM_LOG_FUNC;
+
+	if(db == NULL) {
+		return(NULL);
+	}
+
+	pmpkghash_t *pkgcache = _alpm_db_get_pkgcache_hash(db);
+	if(!pkgcache) {
+		_alpm_log(PM_LOG_DEBUG, "warning: failed to get '%s' from NULL pkgcache\n",
+				target);
+		return(NULL);
+	}
+
+	return(_alpm_pkghash_find(pkgcache, target));
+}
+
+/* Returns a new group cache from db.
+ */
+int _alpm_db_load_grpcache(pmdb_t *db)
+{
+	alpm_list_t *lp;
+
+	ALPM_LOG_FUNC;
+
+	if(db == NULL) {
+		return(-1);
+	}
+
+	_alpm_log(PM_LOG_DEBUG, "loading group cache for repository '%s'\n",
+			db->treename);
+
+	for(lp = _alpm_db_get_pkgcache(db); lp; lp = lp->next) {
+		const alpm_list_t *i;
+		pmpkg_t *pkg = lp->data;
+
+		for(i = alpm_pkg_get_groups(pkg); i; i = i->next) {
+			const char *grpname = i->data;
+			alpm_list_t *j;
+			pmgrp_t *grp = NULL;
+			int found = 0;
+
+			/* first look through the group cache for a group with this name */
+			for(j = db->grpcache; j; j = j->next) {
+				grp = j->data;
+
+				if(strcmp(grp->name, grpname) == 0
+						&& !alpm_list_find_ptr(grp->packages, pkg)) {
+					grp->packages = alpm_list_add(grp->packages, pkg);
+					found = 1;
+					break;
+				}
+			}
+			if(found) {
+				continue;
+			}
+			/* we didn't find the group, so create a new one with this name */
+			grp = _alpm_grp_new(grpname);
+			grp->packages = alpm_list_add(grp->packages, pkg);
+			db->grpcache = alpm_list_add(db->grpcache, grp);
+		}
+	}
+
+	db->grpcache_loaded = 1;
+	return(0);
+}
+
+void _alpm_db_free_grpcache(pmdb_t *db)
+{
+	alpm_list_t *lg;
+
+	ALPM_LOG_FUNC;
+
+	if(db == NULL || !db->grpcache_loaded) {
+		return;
+	}
+
+	_alpm_log(PM_LOG_DEBUG, "freeing group cache for repository '%s'\n",
+	                        db->treename);
+
+	for(lg = db->grpcache; lg; lg = lg->next) {
+		_alpm_grp_free(lg->data);
+		lg->data = NULL;
+	}
+	FREELIST(db->grpcache);
+	db->grpcache_loaded = 0;
+}
+
+alpm_list_t *_alpm_db_get_grpcache(pmdb_t *db)
+{
+	ALPM_LOG_FUNC;
+
+	if(db == NULL) {
+		return(NULL);
+	}
+
+	if(!db->grpcache_loaded) {
+		_alpm_db_load_grpcache(db);
+	}
+
+	return(db->grpcache);
+}
+
+pmgrp_t *_alpm_db_get_grpfromcache(pmdb_t *db, const char *target)
 {
-	pmdb_t *db;
-	const char *dbpath;
-	char path[PATH_MAX];
 	alpm_list_t *i;
 
 	ALPM_LOG_FUNC;
 
-	for(i = handle->dbs_sync; i; i = i->next) {
-		pmdb_t *sdb = i->data;
-		if(strcmp(treename, sdb->treename) == 0) {
-			_alpm_log(PM_LOG_DEBUG, "attempt to re-register the '%s' database, using existing\n", sdb->treename);
-			return sdb;
+	if(db == NULL || target == NULL || strlen(target) == 0) {
+		return(NULL);
+	}
+
+	for(i = _alpm_db_get_grpcache(db); i; i = i->next) {
+		pmgrp_t *info = i->data;
+
+		if(strcmp(info->name, target) == 0) {
+			return(info);
 		}
 	}
 
-	_alpm_log(PM_LOG_DEBUG, "registering sync database '%s'\n", treename);
-
-	dbpath = alpm_option_get_dbpath();
-	if(!dbpath) {
-		_alpm_log(PM_LOG_ERROR, _("database path is undefined\n"));
-			RET_ERR(PM_ERR_DB_OPEN, NULL);
-	}
-	/* all sync DBs now reside in the sync/ subdir of the dbpath */
-	snprintf(path, PATH_MAX, "%ssync/", dbpath);
-
-	db = _alpm_db_new(path, treename);
-	if(db == NULL) {
-		RET_ERR(PM_ERR_DB_CREATE, NULL);
-	}
-
-	handle->dbs_sync = alpm_list_add(handle->dbs_sync, db);
-	return(db);
+	return(NULL);
 }
 
 /* vim: set ts=2 sw=2 noet: */

lib/libalpm/db.h

@@ -1,7 +1,7 @@
 /*
  *  db.h
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *  Copyright (c) 2005 by Aurelien Foret <orelien@chez.com>
  *  Copyright (c) 2006 by Miklos Vajna <vmiklos@frugalware.org>
@@ -23,46 +23,80 @@
 #define _ALPM_DB_H
 
 #include "alpm.h"
-#include <limits.h>
+#include "pkghash.h"
+
 #include <time.h>
 
+/* libarchive */
+#include <archive.h>
+#include <archive_entry.h>
+
 /* Database entries */
 typedef enum _pmdbinfrq_t {
-	INFRQ_BASE = 0x01,
-	INFRQ_DESC = 0x02,
-	INFRQ_DEPENDS = 0x04,
-	INFRQ_FILES = 0x08,
-	INFRQ_SCRIPTLET = 0x10,
-	INFRQ_DELTAS = 0x20,
-	/* ALL should be sum of all above */
-	INFRQ_ALL = 0x3F
+	INFRQ_BASE = 1,
+	INFRQ_DESC = (1 << 1),
+	INFRQ_FILES = (1 << 2),
+	INFRQ_SCRIPTLET = (1 << 3),
+	INFRQ_DSIZE = (1 << 4),
+	/* ALL should be info stored in the package or database */
+	INFRQ_ALL = 0x1F
 } pmdbinfrq_t;
 
+struct db_operations {
+	int (*populate) (pmdb_t *);
+	void (*unregister) (pmdb_t *);
+	int (*version) (pmdb_t *);
+};
+
 /* Database */
 struct __pmdb_t {
-	char *path;
 	char *treename;
-	unsigned short pkgcache_loaded;
-	alpm_list_t *pkgcache;
-	unsigned short grpcache_loaded;
+	/* do not access directly, use _alpm_db_path(db) for lazy access */
+	char *_path;
+	int pkgcache_loaded;
+	int grpcache_loaded;
+	/* also indicates whether we are RO or RW */
+	int is_local;
+	pmpkghash_t *pkgcache;
 	alpm_list_t *grpcache;
 	alpm_list_t *servers;
+
+	struct db_operations *ops;
 };
 
+
 /* db.c, database general calls */
-pmdb_t *_alpm_db_new(const char *dbpath, const char *treename);
+pmdb_t *_alpm_db_new(const char *treename, int is_local);
 void _alpm_db_free(pmdb_t *db);
+const char *_alpm_db_path(pmdb_t *db);
+int _alpm_db_version(pmdb_t *db);
 int _alpm_db_cmp(const void *d1, const void *d2);
 alpm_list_t *_alpm_db_search(pmdb_t *db, const alpm_list_t *needles);
 pmdb_t *_alpm_db_register_local(void);
 pmdb_t *_alpm_db_register_sync(const char *treename);
+void _alpm_db_unregister(pmdb_t *db);
 
-/* be.c, backend specific calls */
-int _alpm_db_populate(pmdb_t *db);
-int _alpm_db_read(pmdb_t *db, pmpkg_t *info, pmdbinfrq_t inforeq);
-int _alpm_db_prepare(pmdb_t *db, pmpkg_t *info);
-int _alpm_db_write(pmdb_t *db, pmpkg_t *info, pmdbinfrq_t inforeq);
-int _alpm_db_remove(pmdb_t *db, pmpkg_t *info);
+/* be_*.c, backend specific calls */
+int _alpm_local_db_read(pmdb_t *db, pmpkg_t *info, pmdbinfrq_t inforeq);
+int _alpm_local_db_prepare(pmdb_t *db, pmpkg_t *info);
+int _alpm_local_db_write(pmdb_t *db, pmpkg_t *info, pmdbinfrq_t inforeq);
+int _alpm_local_db_remove(pmdb_t *db, pmpkg_t *info);
+
+/* cache bullshit */
+/* packages */
+int _alpm_db_load_pkgcache(pmdb_t *db);
+void _alpm_db_free_pkgcache(pmdb_t *db);
+int _alpm_db_add_pkgincache(pmdb_t *db, pmpkg_t *pkg);
+int _alpm_db_remove_pkgfromcache(pmdb_t *db, pmpkg_t *pkg);
+pmpkghash_t *_alpm_db_get_pkgcache_hash(pmdb_t *db);
+alpm_list_t *_alpm_db_get_pkgcache(pmdb_t *db);
+int _alpm_db_ensure_pkgcache(pmdb_t *db, pmdbinfrq_t infolevel);
+pmpkg_t *_alpm_db_get_pkgfromcache(pmdb_t *db, const char *target);
+/* groups */
+int _alpm_db_load_grpcache(pmdb_t *db);
+void _alpm_db_free_grpcache(pmdb_t *db);
+alpm_list_t *_alpm_db_get_grpcache(pmdb_t *db);
+pmgrp_t *_alpm_db_get_grpfromcache(pmdb_t *db, const char *target);
 
 #endif /* _ALPM_DB_H */
 

lib/libalpm/delta.c

@@ -1,7 +1,7 @@
 /*
  *  delta.c
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2007-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -71,34 +71,16 @@ off_t SYMEXPORT alpm_delta_get_size(pmdelta_t *delta)
 
 /** @} */
 
-static alpm_list_t *delta_graph_init(alpm_list_t *deltas)
+static alpm_list_t *graph_init(alpm_list_t *deltas, int reverse)
 {
 	alpm_list_t *i, *j;
 	alpm_list_t *vertices = NULL;
 	/* create the vertices */
 	for(i = deltas; i; i = i->next) {
-		char *fpath, *md5sum;
 		pmgraph_t *v = _alpm_graph_new();
 		pmdelta_t *vdelta = i->data;
 		vdelta->download_size = vdelta->delta_size;
 		v->weight = LONG_MAX;
-
-		/* determine whether the delta file already exists */
-		fpath = _alpm_filecache_find(vdelta->delta);
-		md5sum = alpm_compute_md5sum(fpath);
-		if(fpath && md5sum && strcmp(md5sum, vdelta->delta_md5) == 0) {
-			vdelta->download_size = 0;
-		}
-		FREE(fpath);
-		FREE(md5sum);
-
-		/* determine whether a base 'from' file exists */
-		fpath = _alpm_filecache_find(vdelta->from);
-		if(fpath) {
-			v->weight = vdelta->download_size;
-		}
-		FREE(fpath);
-
 		v->data = vdelta;
 		vertices = alpm_list_add(vertices, v);
 	}
@@ -119,7 +101,8 @@ static alpm_list_t *delta_graph_init(alpm_list_t *deltas)
 			 *     3_to_4
 			 * If J 'from' is equal to I 'to', then J is a child of I.
 			 * */
-			if(strcmp(d_j->from, d_i->to) == 0) {
+			if((!reverse && strcmp(d_j->from, d_i->to) == 0) ||
+					(reverse && strcmp(d_j->to, d_i->from) == 0)) {
 				v_i->children = alpm_list_add(v_i->children, v_j);
 			}
 		}
@@ -128,8 +111,36 @@ static alpm_list_t *delta_graph_init(alpm_list_t *deltas)
 	return(vertices);
 }
 
-static off_t delta_vert(alpm_list_t *vertices,
-		const char *to, alpm_list_t **path) {
+static void graph_init_size(alpm_list_t *vertices)
+{
+	alpm_list_t *i;
+
+	for(i = vertices; i; i = i->next) {
+		char *fpath, *md5sum;
+		pmgraph_t *v = i->data;
+		pmdelta_t *vdelta = v->data;
+
+		/* determine whether the delta file already exists */
+		fpath = _alpm_filecache_find(vdelta->delta);
+		md5sum = alpm_compute_md5sum(fpath);
+		if(fpath && md5sum && strcmp(md5sum, vdelta->delta_md5) == 0) {
+			vdelta->download_size = 0;
+		}
+		FREE(fpath);
+		FREE(md5sum);
+
+		/* determine whether a base 'from' file exists */
+		fpath = _alpm_filecache_find(vdelta->from);
+		if(fpath) {
+			v->weight = vdelta->download_size;
+		}
+		FREE(fpath);
+	}
+}
+
+
+static void dijkstra(alpm_list_t *vertices)
+{
 	alpm_list_t *i;
 	pmgraph_t *v;
 	while(1) {
@@ -165,9 +176,14 @@ static off_t delta_vert(alpm_list_t *vertices,
 
 		}
 	}
+}
 
-	v = NULL;
+static off_t shortest_path(alpm_list_t *vertices, const char *to, alpm_list_t **path)
+{
+	alpm_list_t *i;
+	pmgraph_t *v = NULL;
 	off_t bestsize = 0;
+	alpm_list_t *rpath = NULL;
 
 	for(i = vertices; i; i = i->next) {
 		pmgraph_t *v_i = i->data;
@@ -181,7 +197,6 @@ static off_t delta_vert(alpm_list_t *vertices,
 		}
 	}
 
-	alpm_list_t *rpath = NULL;
 	while(v != NULL) {
 		pmdelta_t *vdelta = v->data;
 		rpath = alpm_list_add(rpath, vdelta);
@@ -219,9 +234,10 @@ off_t _alpm_shortest_delta_path(alpm_list_t *deltas,
 
 	_alpm_log(PM_LOG_DEBUG, "started delta shortest-path search for '%s'\n", to);
 
-	vertices = delta_graph_init(deltas);
-
-	bestsize = delta_vert(vertices, to, &bestpath);
+	vertices = graph_init(deltas, 0);
+	graph_init_size(vertices);
+	dijkstra(vertices);
+	bestsize = shortest_path(vertices, to, &bestpath);
 
 	_alpm_log(PM_LOG_DEBUG, "delta shortest-path search complete : '%jd'\n", (intmax_t)bestsize);
 
@@ -232,6 +248,45 @@ off_t _alpm_shortest_delta_path(alpm_list_t *deltas,
 	return(bestsize);
 }
 
+static alpm_list_t *find_unused(alpm_list_t *deltas, const char *to, off_t quota)
+{
+	alpm_list_t *unused = NULL;
+	alpm_list_t *vertices;
+	alpm_list_t *i;
+	vertices = graph_init(deltas, 1);
+
+	for(i = vertices; i; i = i->next) {
+		pmgraph_t *v = i->data;
+		pmdelta_t *vdelta = v->data;
+		if(strcmp(vdelta->to, to) == 0)
+		{
+			v->weight = vdelta->download_size;
+		}
+	}
+	dijkstra(vertices);
+	for(i = vertices; i; i = i->next) {
+		pmgraph_t *v = i->data;
+		pmdelta_t *vdelta = v->data;
+		if(v->weight > quota) {
+			unused = alpm_list_add(unused, vdelta->delta);
+		}
+	}
+	alpm_list_free_inner(vertices, _alpm_graph_free);
+	alpm_list_free(vertices);
+	return(unused);
+}
+
+alpm_list_t SYMEXPORT *alpm_pkg_unused_deltas(pmpkg_t *pkg)
+{
+	off_t pkgsize = alpm_pkg_get_size(pkg);
+	alpm_list_t *unused = find_unused(
+			alpm_pkg_get_deltas(pkg),
+			alpm_pkg_get_filename(pkg),
+			pkgsize * MAX_DELTA_RATIO);
+	return(unused);
+}
+
+
 /** Parses the string representation of a pmdelta_t object.
  * This function assumes that the string is in the correct format.
  * This format is as follows:
@@ -282,7 +337,7 @@ pmdelta_t *_alpm_delta_parse(char *line)
 	tmp2 = tmp;
 	STRDUP(delta->to, tmp2, RET_ERR(PM_ERR_MEMORY, NULL));
 
-	_alpm_log(PM_LOG_DEBUG, "delta : %s %s '%lld'\n", delta->from, delta->to, (long long)delta->delta_size);
+	_alpm_log(PM_LOG_DEBUG, "delta : %s %s '%jd'\n", delta->from, delta->to, (intmax_t)delta->delta_size);
 
 	return(delta);
 }

lib/libalpm/delta.h

@@ -1,7 +1,7 @@
 /*
  *  delta.h
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2007-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -44,6 +44,9 @@ void _alpm_delta_free(pmdelta_t *delta);
 off_t _alpm_shortest_delta_path(alpm_list_t *deltas,
 		const char *to, alpm_list_t **path);
 
+/* max percent of package size to download deltas */
+#define MAX_DELTA_RATIO 0.7
+
 #endif /* _ALPM_DELTA_H */
 
 /* vim: set ts=2 sw=2 noet: */

lib/libalpm/deps.c

@@ -1,7 +1,7 @@
 /*
  *  deps.c
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *  Copyright (c) 2005 by Aurelien Foret <orelien@chez.com>
  *  Copyright (c) 2005, 2006 by Miklos Vajna <vmiklos@frugalware.org>
@@ -34,7 +34,6 @@
 #include "graph.h"
 #include "package.h"
 #include "db.h"
-#include "cache.h"
 #include "handle.h"
 
 void _alpm_dep_free(pmdepend_t *dep)
@@ -140,8 +139,8 @@ alpm_list_t *_alpm_sortbydeps(alpm_list_t *targets, int reverse)
 		vertex->state = -1;
 		int found = 0;
 		while(vertex->childptr && !found) {
-			pmgraph_t *nextchild = (vertex->childptr)->data;
-			vertex->childptr = (vertex->childptr)->next;
+			pmgraph_t *nextchild = vertex->childptr->data;
+			vertex->childptr = vertex->childptr->next;
 			if (nextchild->state == 0) {
 				found = 1;
 				nextchild->parent = vertex;
@@ -150,12 +149,15 @@ alpm_list_t *_alpm_sortbydeps(alpm_list_t *targets, int reverse)
 			else if(nextchild->state == -1) {
 				pmpkg_t *vertexpkg = vertex->data;
 				pmpkg_t *childpkg = nextchild->data;
+				const char *message;
+
 				_alpm_log(PM_LOG_WARNING, _("dependency cycle detected:\n"));
 				if(reverse) {
-					_alpm_log(PM_LOG_WARNING, _("%s will be removed after its %s dependency\n"), vertexpkg->name, childpkg->name);
+					message =_("%s will be removed after its %s dependency\n");
 				} else {
-					_alpm_log(PM_LOG_WARNING, _("%s will be installed before its %s dependency\n"), vertexpkg->name, childpkg->name);
+					message =_("%s will be installed before its %s dependency\n");
 				}
+				_alpm_log(PM_LOG_WARNING, message, vertexpkg->name, childpkg->name);
 			}
 		}
 		if(!found) {
@@ -196,36 +198,25 @@ pmpkg_t *_alpm_find_dep_satisfier(alpm_list_t *pkgs, pmdepend_t *dep)
 
 	for(i = pkgs; i; i = alpm_list_next(i)) {
 		pmpkg_t *pkg = i->data;
-		if(alpm_depcmp(pkg, dep)) {
+		if(_alpm_depcmp_tolerant(pkg, dep)) {
 			return(pkg);
 		}
 	}
 	return(NULL);
 }
 
-/** Checks dependencies and returns missing ones in a list.
- * Dependencies can include versions with depmod operators.
- * @param db pointer to the local package database
- * @param targets an alpm_list_t* of dependencies strings to satisfy
- * @return an alpm_list_t* of missing dependencies strings
+/** Find a package satisfying a specified dependency.
+ * The dependency can include versions with depmod operators.
+ * @param pkgs an alpm_list_t* of pmpkg_t where the satisfier will be searched
+ * @param depstring package or provision name, versioned or not
+ * @return a pmpkg_t* satisfying depstring
  */
-alpm_list_t SYMEXPORT *alpm_deptest(pmdb_t *db, alpm_list_t *targets)
+pmpkg_t SYMEXPORT *alpm_find_satisfier(alpm_list_t *pkgs, const char *depstring)
 {
-	alpm_list_t *i, *ret = NULL;
-
-	for(i = targets; i; i = alpm_list_next(i)) {
-		pmdepend_t *dep;
-		char *target;
-
-		target = alpm_list_getdata(i);
-		dep = _alpm_splitdep(target);
-
-		if(!_alpm_find_dep_satisfier(_alpm_db_get_pkgcache(db), dep)) {
-			ret = alpm_list_add(ret, target);
-		}
-		_alpm_dep_free(dep);
-	}
-	return(ret);
+	pmdepend_t *dep = _alpm_splitdep(depstring);
+	pmpkg_t *pkg = _alpm_find_dep_satisfier(pkgs, dep);
+	_alpm_dep_free(dep);
+	return(pkg);
 }
 
 /** Checks dependencies and returns missing ones in a list.
@@ -234,7 +225,7 @@ alpm_list_t SYMEXPORT *alpm_deptest(pmdb_t *db, alpm_list_t *targets)
  * @param reversedeps handles the backward dependencies
  * @param remove an alpm_list_t* of packages to be removed
  * @param upgrade an alpm_list_t* of packages to be upgraded (remove-then-upgrade)
- * @return an alpm_list_t* of pmpkg_t* of missing_t pointers.
+ * @return an alpm_list_t* of pmpkg_t* of pmdepmissing_t pointers.
  */
 alpm_list_t SYMEXPORT *alpm_checkdeps(alpm_list_t *pkglist, int reversedeps,
 		alpm_list_t *remove, alpm_list_t *upgrade)
@@ -242,14 +233,13 @@ alpm_list_t SYMEXPORT *alpm_checkdeps(alpm_list_t *pkglist, int reversedeps,
 	alpm_list_t *i, *j;
 	alpm_list_t *targets, *dblist = NULL, *modified = NULL;
 	alpm_list_t *baddeps = NULL;
-	pmdepmissing_t *miss = NULL;
 
 	ALPM_LOG_FUNC;
 
 	targets = alpm_list_join(alpm_list_copy(remove), alpm_list_copy(upgrade));
 	for(i = pkglist; i; i = i->next) {
-		void *pkg = i->data;
-		if(alpm_list_find(targets, pkg, _alpm_pkg_cmp)) {
+		pmpkg_t *pkg = i->data;
+		if(_alpm_pkg_find(targets, pkg->name)) {
 			modified = alpm_list_add(modified, pkg);
 		} else {
 			dblist = alpm_list_add(dblist, pkg);
@@ -270,6 +260,7 @@ alpm_list_t SYMEXPORT *alpm_checkdeps(alpm_list_t *pkglist, int reversedeps,
 			if(!_alpm_find_dep_satisfier(upgrade, depend) &&
 			   !_alpm_find_dep_satisfier(dblist, depend)) {
 				/* Unsatisfied dependency in the upgrade list */
+				pmdepmissing_t *miss;
 				char *missdepstring = alpm_dep_compute_string(depend);
 				_alpm_log(PM_LOG_DEBUG, "checkdeps: missing dependency '%s' for package '%s'\n",
 						missdepstring, alpm_pkg_get_name(tp));
@@ -294,6 +285,7 @@ alpm_list_t SYMEXPORT *alpm_checkdeps(alpm_list_t *pkglist, int reversedeps,
 				if(causingpkg &&
 				   !_alpm_find_dep_satisfier(upgrade, depend) &&
 				   !_alpm_find_dep_satisfier(dblist, depend)) {
+					pmdepmissing_t *miss;
 					char *missdepstring = alpm_dep_compute_string(depend);
 					_alpm_log(PM_LOG_DEBUG, "checkdeps: transaction would break '%s' dependency of '%s'\n",
 							missdepstring, alpm_pkg_get_name(lp));
@@ -304,6 +296,7 @@ alpm_list_t SYMEXPORT *alpm_checkdeps(alpm_list_t *pkglist, int reversedeps,
 			}
 		}
 	}
+
 	alpm_list_free(modified);
 	alpm_list_free(dblist);
 
@@ -331,89 +324,116 @@ static int dep_vercmp(const char *version1, pmdepmod_t mod,
 	return(equal);
 }
 
-int SYMEXPORT alpm_depcmp(pmpkg_t *pkg, pmdepend_t *dep)
+/* nodepversion: skip version checking */
+static int _depcmp(pmpkg_t *pkg, pmdepend_t *dep, int nodepversion)
 {
 	alpm_list_t *i;
-
-	ALPM_LOG_FUNC;
-
-	const char *pkgname = alpm_pkg_get_name(pkg);
-	const char *pkgversion = alpm_pkg_get_version(pkg);
 	int satisfy = 0;
+	int depmod;
+
+	if(nodepversion) {
+		depmod = PM_DEP_MOD_ANY;
+	} else {
+		depmod = dep->mod;
+	}
 
 	/* check (pkg->name, pkg->version) */
-	satisfy = (strcmp(pkgname, dep->name) == 0
-			&& dep_vercmp(pkgversion, dep->mod, dep->version));
+	if(pkg->name_hash && dep->name_hash
+			&& pkg->name_hash != dep->name_hash) {
+		/* skip more expensive checks */
+	} else {
+		satisfy = (strcmp(pkg->name, dep->name) == 0
+				&& dep_vercmp(pkg->version, depmod, dep->version));
+		if(satisfy) {
+			return(satisfy);
+		}
+	}
 
 	/* check provisions, format : "name=version" */
 	for(i = alpm_pkg_get_provides(pkg); i && !satisfy; i = i->next) {
-		char *provname = strdup(i->data);
-		char *provver = strchr(provname, '=');
+		const char *provision = i->data;
+		const char *provver = strchr(provision, '=');
 
 		if(provver == NULL) { /* no provision version */
-			satisfy = (dep->mod == PM_DEP_MOD_ANY
-					&& strcmp(provname, dep->name) == 0);
+			satisfy = (depmod == PM_DEP_MOD_ANY
+					&& strcmp(provision, dep->name) == 0);
 		} else {
-			*provver = '\0';
+			/* This is a bit tricker than the old code for performance reasons. To
+			 * prevent the need to copy and duplicate strings, strncmp only the name
+			 * portion if they are the same length, since there is a version and
+			 * operator in play here. Cast is to silence sign conversion warning;
+			 * we know provver >= provision if we are here. */
+			size_t namelen = (size_t)(provver - provision);
 			provver += 1;
-			satisfy = (strcmp(provname, dep->name) == 0
-					&& dep_vercmp(provver, dep->mod, dep->version));
+			satisfy = (strlen(dep->name) == namelen
+					&& strncmp(provision, dep->name, namelen) == 0
+					&& dep_vercmp(provver, depmod, dep->version));
 		}
-		free(provname);
 	}
 
 	return(satisfy);
 }
 
+/* tolerant : respects NODEPVERSION flag */
+int _alpm_depcmp_tolerant(pmpkg_t *pkg, pmdepend_t *dep)
+{
+	int nodepversion = 0;
+	int flags = alpm_trans_get_flags();
+
+	if (flags != -1) {
+		nodepversion = flags & PM_TRANS_FLAG_NODEPVERSION;
+	}
+
+	return(_depcmp(pkg, dep, nodepversion));
+}
+
+/* strict : ignores NODEPVERSION flag */
+int _alpm_depcmp(pmpkg_t *pkg, pmdepend_t *dep)
+{
+	return(_depcmp(pkg, dep, 0));
+}
+
 pmdepend_t *_alpm_splitdep(const char *depstring)
 {
 	pmdepend_t *depend;
-	char *ptr = NULL;
-	char *newstr = NULL;
+	const char *ptr, *version = NULL;
 
 	if(depstring == NULL) {
 		return(NULL);
 	}
-	STRDUP(newstr, depstring, RET_ERR(PM_ERR_MEMORY, NULL));
 
 	CALLOC(depend, 1, sizeof(pmdepend_t), RET_ERR(PM_ERR_MEMORY, NULL));
 
 	/* Find a version comparator if one exists. If it does, set the type and
 	 * increment the ptr accordingly so we can copy the right strings. */
-	if((ptr = strstr(newstr, ">="))) {
+	if((ptr = strstr(depstring, ">="))) {
 		depend->mod = PM_DEP_MOD_GE;
-		*ptr = '\0';
-		ptr += 2;
-	} else if((ptr = strstr(newstr, "<="))) {
+		version = ptr + 2;
+	} else if((ptr = strstr(depstring, "<="))) {
 		depend->mod = PM_DEP_MOD_LE;
-		*ptr = '\0';
-		ptr += 2;
-	} else if((ptr = strstr(newstr, "="))) { /* Note: we must do =,<,> checks after <=, >= checks */
+		version = ptr + 2;
+	} else if((ptr = strstr(depstring, "="))) {
+		/* Note: we must do =,<,> checks after <=, >= checks */
 		depend->mod = PM_DEP_MOD_EQ;
-		*ptr = '\0';
-		ptr += 1;
-	} else if((ptr = strstr(newstr, "<"))) {
+		version = ptr + 1;
+	} else if((ptr = strstr(depstring, "<"))) {
 		depend->mod = PM_DEP_MOD_LT;
-		*ptr = '\0';
-		ptr += 1;
-	} else if((ptr = strstr(newstr, ">"))) {
+		version = ptr + 1;
+	} else if((ptr = strstr(depstring, ">"))) {
 		depend->mod = PM_DEP_MOD_GT;
-		*ptr = '\0';
-		ptr += 1;
+		version = ptr + 1;
 	} else {
-		/* no version specified - copy the name and return it */
+		/* no version specified, leave version and ptr NULL */
 		depend->mod = PM_DEP_MOD_ANY;
-		STRDUP(depend->name, newstr, RET_ERR(PM_ERR_MEMORY, NULL));
-		depend->version = NULL;
-		free(newstr);
-		return(depend);
 	}
 
-	/* if we get here, we have a version comparator, copy the right parts
-	 * to the right places */
-	STRDUP(depend->name, newstr, RET_ERR(PM_ERR_MEMORY, NULL));
-	STRDUP(depend->version, ptr, RET_ERR(PM_ERR_MEMORY, NULL));
-	free(newstr);
+	/* copy the right parts to the right places */
+	STRNDUP(depend->name, depstring, ptr - depstring,
+			RET_ERR(PM_ERR_MEMORY, NULL));
+	depend->name_hash = _alpm_hash_sdbm(depend->name);
+	if(version) {
+		STRDUP(depend->version, version, RET_ERR(PM_ERR_MEMORY, NULL));
+	}
 
 	return(depend);
 }
@@ -424,6 +444,7 @@ pmdepend_t *_alpm_dep_dup(const pmdepend_t *dep)
 	CALLOC(newdep, 1, sizeof(pmdepend_t), RET_ERR(PM_ERR_MEMORY, NULL));
 
 	STRDUP(newdep->name, dep->name, RET_ERR(PM_ERR_MEMORY, NULL));
+	newdep->name_hash = dep->name_hash;
 	STRDUP(newdep->version, dep->version, RET_ERR(PM_ERR_MEMORY, NULL));
 	newdep->mod = dep->mod;
 
@@ -505,6 +526,28 @@ void _alpm_recursedeps(pmdb_t *db, alpm_list_t *targs, int include_explicit)
 	}
 }
 
+/** Find a package satisfying a specified dependency.
+ * First look for a literal, going through each db one by one. Then look for
+ * providers. The first satisfier found is returned.
+ * The dependency can include versions with depmod operators.
+ * @param dbs an alpm_list_t* of pmdb_t where the satisfier will be searched
+ * @param depstring package or provision name, versioned or not
+ * @return a pmpkg_t* satisfying depstring
+ */
+pmpkg_t SYMEXPORT *alpm_find_dbs_satisfier(alpm_list_t *dbs, const char *depstring)
+{
+	pmdepend_t *dep;
+	pmpkg_t *pkg;
+
+	ASSERT(dbs, return(NULL));
+
+	dep = _alpm_splitdep(depstring);
+	ASSERT(dep, return(NULL));
+	pkg = _alpm_resolvedep(dep, dbs, NULL, 1);
+	_alpm_dep_free(dep);
+	return(pkg);
+}
+
 /**
  * helper function for resolvedeps: search for dep satisfier in dbs
  *
@@ -522,10 +565,14 @@ pmpkg_t *_alpm_resolvedep(pmdepend_t *dep, alpm_list_t *dbs,
 {
 	alpm_list_t *i, *j;
 	int ignored = 0;
+
+	alpm_list_t *providers = NULL;
+	int count;
+
 	/* 1. literals */
 	for(i = dbs; i; i = i->next) {
 		pmpkg_t *pkg = _alpm_db_get_pkgfromcache(i->data, dep->name);
-		if(pkg && alpm_depcmp(pkg, dep) && !_alpm_pkg_find(excluding, pkg->name)) {
+		if(pkg && _alpm_depcmp_tolerant(pkg, dep) && !_alpm_pkg_find(excluding, pkg->name)) {
 			if(_alpm_pkg_should_ignore(pkg)) {
 				int install = 0;
 				if (prompt) {
@@ -546,7 +593,7 @@ pmpkg_t *_alpm_resolvedep(pmdepend_t *dep, alpm_list_t *dbs,
 	for(i = dbs; i; i = i->next) {
 		for(j = _alpm_db_get_pkgcache(i->data); j; j = j->next) {
 			pmpkg_t *pkg = j->data;
-			if(alpm_depcmp(pkg, dep) && strcmp(pkg->name, dep->name) &&
+			if(_alpm_depcmp_tolerant(pkg, dep) && strcmp(pkg->name, dep->name) != 0 &&
 			             !_alpm_pkg_find(excluding, pkg->name)) {
 				if(_alpm_pkg_should_ignore(pkg)) {
 					int install = 0;
@@ -561,12 +608,40 @@ pmpkg_t *_alpm_resolvedep(pmdepend_t *dep, alpm_list_t *dbs,
 						continue;
 					}
 				}
-				_alpm_log(PM_LOG_WARNING, _("provider package was selected (%s provides %s)\n"),
-				                         pkg->name, dep->name);
-				return(pkg);
+				_alpm_log(PM_LOG_DEBUG, "provider found (%s provides %s)\n",
+						pkg->name, dep->name);
+				providers = alpm_list_add(providers, pkg);
+				/* keep looking for other providers in the all dbs */
 			}
 		}
 	}
+
+	/* first check if one provider is already installed locally */
+	for(i = providers; i; i = i->next) {
+		pmpkg_t *pkg = i->data;
+		if (_alpm_pkghash_find(_alpm_db_get_pkgcache_hash(handle->db_local), pkg->name)) {
+			alpm_list_free(providers);
+			return(pkg);
+		}
+	}
+	count = alpm_list_count(providers);
+	if (count >= 1) {
+		/* default to first provider if there is no QUESTION callback */
+		int index = 0;
+		if(count > 1) {
+			/* if there is more than one provider, we ask the user */
+			QUESTION(handle->trans, PM_TRANS_CONV_SELECT_PROVIDER,
+					providers, dep, NULL, &index);
+		}
+		if(index >= 0 && index < count) {
+			pmpkg_t *pkg = alpm_list_getdata(alpm_list_nth(providers, index));
+			alpm_list_free(providers);
+			return(pkg);
+		}
+		alpm_list_free(providers);
+		providers = NULL;
+	}
+
 	if(ignored) { /* resolvedeps will override these */
 		pm_errno = PM_ERR_PKG_IGNORED;
 	} else {
@@ -578,7 +653,7 @@ pmpkg_t *_alpm_resolvedep(pmdepend_t *dep, alpm_list_t *dbs,
 /* Computes resolvable dependencies for a given package and adds that package
  * and those resolvable dependencies to a list.
  *
- * @param local is the local database
+ * @param localpkgs is the list of local packages
  * @param dbs_sync are the sync databases
  * @param pkg is the package to resolve
  * @param packages is a pointer to a list of packages which will be
@@ -594,10 +669,11 @@ pmpkg_t *_alpm_resolvedep(pmdepend_t *dep, alpm_list_t *dbs,
  *         unresolvable dependency, in which case the [*packages] list will be
  *         unmodified by this function
  */
-int _alpm_resolvedeps(pmdb_t *local, alpm_list_t *dbs_sync, pmpkg_t *pkg,
+int _alpm_resolvedeps(alpm_list_t *localpkgs, alpm_list_t *dbs_sync, pmpkg_t *pkg,
                       alpm_list_t *preferred, alpm_list_t **packages,
                       alpm_list_t *remove, alpm_list_t **data)
 {
+	int ret = 0;
 	alpm_list_t *i, *j;
 	alpm_list_t *targ;
 	alpm_list_t *deps = NULL;
@@ -605,10 +681,6 @@ int _alpm_resolvedeps(pmdb_t *local, alpm_list_t *dbs_sync, pmpkg_t *pkg,
 
 	ALPM_LOG_FUNC;
 
-	if(local == NULL || dbs_sync == NULL) {
-		return(-1);
-	}
-
 	if(_alpm_pkg_find(*packages, pkg->name) != NULL) {
 		return(0);
 	}
@@ -624,16 +696,20 @@ int _alpm_resolvedeps(pmdb_t *local, alpm_list_t *dbs_sync, pmpkg_t *pkg,
 	for(i = alpm_list_last(*packages); i; i = i->next) {
 		pmpkg_t *tpkg = i->data;
 		targ = alpm_list_add(NULL, tpkg);
-		deps = alpm_checkdeps(_alpm_db_get_pkgcache(local), 0, remove, targ);
+		deps = alpm_checkdeps(localpkgs, 0, remove, targ);
 		alpm_list_free(targ);
+
 		for(j = deps; j; j = j->next) {
 			pmdepmissing_t *miss = j->data;
 			pmdepend_t *missdep = alpm_miss_get_dep(miss);
-			/* check if one of the packages in the [*packages] list already satisfies this dependency */
+			/* check if one of the packages in the [*packages] list already satisfies
+			 * this dependency */
 			if(_alpm_find_dep_satisfier(*packages, missdep)) {
+				_alpm_depmiss_free(miss);
 				continue;
 			}
-			/* check if one of the packages in the [preferred] list already satisfies this dependency */
+			/* check if one of the packages in the [preferred] list already satisfies
+			 * this dependency */
 			pmpkg_t *spkg = _alpm_find_dep_satisfier(preferred, missdep);
 			if(!spkg) {
 				/* find a satisfier package in the given repositories */
@@ -642,33 +718,32 @@ int _alpm_resolvedeps(pmdb_t *local, alpm_list_t *dbs_sync, pmpkg_t *pkg,
 			if(!spkg) {
 				pm_errno = PM_ERR_UNSATISFIED_DEPS;
 				char *missdepstring = alpm_dep_compute_string(missdep);
-				_alpm_log(PM_LOG_WARNING, _("cannot resolve \"%s\", a dependency of \"%s\"\n"),
+				_alpm_log(PM_LOG_WARNING,
+						_("cannot resolve \"%s\", a dependency of \"%s\"\n"),
 						missdepstring, tpkg->name);
 				free(missdepstring);
 				if(data) {
-					pmdepmissing_t *missd = _alpm_depmiss_new(miss->target,
-							miss->depend, miss->causingpkg);
-					if(missd) {
-						*data = alpm_list_add(*data, missd);
-					}
+					*data = alpm_list_add(*data, miss);
 				}
-				alpm_list_free(*packages);
-				*packages = packages_copy;
-				alpm_list_free_inner(deps, (alpm_list_fn_free)_alpm_depmiss_free);
-				alpm_list_free(deps);
-				return(-1);
+				ret = -1;
 			} else {
 				_alpm_log(PM_LOG_DEBUG, "pulling dependency %s (needed by %s)\n",
 						alpm_pkg_get_name(spkg), alpm_pkg_get_name(tpkg));
 				*packages = alpm_list_add(*packages, spkg);
+				_alpm_depmiss_free(miss);
 			}
 		}
-		alpm_list_free_inner(deps, (alpm_list_fn_free)_alpm_depmiss_free);
 		alpm_list_free(deps);
 	}
-	alpm_list_free(packages_copy);
+
+	if(ret != 0) {
+		alpm_list_free(*packages);
+		*packages = packages_copy;
+	} else {
+		alpm_list_free(packages_copy);
+	}
 	_alpm_log(PM_LOG_DEBUG, "finished resolving dependencies\n");
-	return(0);
+	return(ret);
 }
 
 /* Does pkg1 depend on pkg2, ie. does pkg2 satisfy a dependency of pkg1? */
@@ -676,7 +751,7 @@ int _alpm_dep_edge(pmpkg_t *pkg1, pmpkg_t *pkg2)
 {
 	alpm_list_t *i;
 	for(i = alpm_pkg_get_depends(pkg1); i; i = i->next) {
-		if(alpm_depcmp(pkg2, i->data)) {
+		if(_alpm_depcmp_tolerant(pkg2, i->data)) {
 			return(1);
 		}
 	}

lib/libalpm/deps.h

@@ -1,7 +1,7 @@
 /*
  *  deps.h
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *  Copyright (c) 2005 by Aurelien Foret <orelien@chez.com>
  *  Copyright (c) 2006 by Miklos Vajna <vmiklos@frugalware.org>
@@ -29,9 +29,10 @@
 
 /* Dependency */
 struct __pmdepend_t {
-	pmdepmod_t mod;
 	char *name;
 	char *version;
+	unsigned long name_hash;
+	pmdepmod_t mod;
 };
 
 /* Missing dependency */
@@ -49,12 +50,14 @@ void _alpm_depmiss_free(pmdepmissing_t *miss);
 alpm_list_t *_alpm_sortbydeps(alpm_list_t *targets, int reverse);
 void _alpm_recursedeps(pmdb_t *db, alpm_list_t *targs, int include_explicit);
 pmpkg_t *_alpm_resolvedep(pmdepend_t *dep, alpm_list_t *dbs, alpm_list_t *excluding, int prompt);
-int _alpm_resolvedeps(pmdb_t *local, alpm_list_t *dbs_sync, pmpkg_t *pkg,
+int _alpm_resolvedeps(alpm_list_t *localpkgs, alpm_list_t *dbs_sync, pmpkg_t *pkg,
 		alpm_list_t *preferred, alpm_list_t **packages, alpm_list_t *remove,
 		alpm_list_t **data);
 int _alpm_dep_edge(pmpkg_t *pkg1, pmpkg_t *pkg2);
 pmdepend_t *_alpm_splitdep(const char *depstring);
 pmpkg_t *_alpm_find_dep_satisfier(alpm_list_t *pkgs, pmdepend_t *dep);
+int _alpm_depcmp(pmpkg_t *pkg, pmdepend_t *dep);
+int _alpm_depcmp_tolerant(pmpkg_t *pkg, pmdepend_t *dep);
 
 #endif /* _ALPM_DEPS_H */
 

lib/libalpm/diskspace.c

@@ -0,0 +1,347 @@
+/*
+ *  diskspace.c
+ *
+ *  Copyright (c) 2010-2011 Pacman Development Team <pacman-dev@archlinux.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "config.h"
+
+#include <errno.h>
+#if defined(HAVE_MNTENT_H)
+#include <mntent.h>
+#endif
+#if defined(HAVE_SYS_STATVFS_H)
+#include <sys/statvfs.h>
+#endif
+#if defined(HAVE_SYS_PARAM_H)
+#include <sys/param.h>
+#endif
+#if defined(HAVE_SYS_MOUNT_H)
+#include <sys/mount.h>
+#endif
+#if defined(HAVE_SYS_UCRED_H)
+#include <sys/ucred.h>
+#endif
+#if defined(HAVE_SYS_TYPES_H)
+#include <sys/types.h>
+#endif
+
+/* libarchive */
+#include <archive.h>
+#include <archive_entry.h>
+
+/* libalpm */
+#include "diskspace.h"
+#include "alpm_list.h"
+#include "util.h"
+#include "log.h"
+#include "trans.h"
+#include "handle.h"
+
+static int mount_point_cmp(const void *p1, const void *p2)
+{
+	const alpm_mountpoint_t *mp1 = p1;
+	const alpm_mountpoint_t *mp2 = p2;
+	/* the negation will sort all mountpoints before their parent */
+	return(-strcmp(mp1->mount_dir, mp2->mount_dir));
+}
+
+static alpm_list_t *mount_point_list(void)
+{
+	alpm_list_t *mount_points = NULL;
+	alpm_mountpoint_t *mp;
+
+#if defined HAVE_GETMNTENT
+	struct mntent *mnt;
+	FILE *fp;
+	struct statvfs fsp;
+
+	fp = setmntent(MOUNTED, "r");
+
+	if (fp == NULL) {
+		return(NULL);
+	}
+
+	while((mnt = getmntent(fp))) {
+		if(!mnt) {
+			_alpm_log(PM_LOG_WARNING, _("could not get filesystem information\n"));
+			continue;
+		}
+		if(statvfs(mnt->mnt_dir, &fsp) != 0) {
+			_alpm_log(PM_LOG_WARNING,
+					_("could not get filesystem information for %s: %s\n"),
+					mnt->mnt_dir, strerror(errno));
+			continue;
+		}
+
+		CALLOC(mp, 1, sizeof(alpm_mountpoint_t), RET_ERR(PM_ERR_MEMORY, NULL));
+		mp->mount_dir = strdup(mnt->mnt_dir);
+		mp->mount_dir_len = strlen(mp->mount_dir);
+		memcpy(&(mp->fsp), &fsp, sizeof(struct statvfs));
+		mp->read_only = fsp.f_flag & ST_RDONLY;
+
+		mount_points = alpm_list_add(mount_points, mp);
+	}
+
+	endmntent(fp);
+#elif defined HAVE_GETMNTINFO
+	int entries;
+	FSSTATSTYPE *fsp;
+
+	entries = getmntinfo(&fsp, MNT_NOWAIT);
+
+	if (entries < 0) {
+		return(NULL);
+	}
+
+	for(; entries-- > 0; fsp++) {
+		CALLOC(mp, 1, sizeof(alpm_mountpoint_t), RET_ERR(PM_ERR_MEMORY, NULL));
+		mp->mount_dir = strdup(fsp->f_mntonname);
+		mp->mount_dir_len = strlen(mp->mount_dir);
+		memcpy(&(mp->fsp), fsp, sizeof(FSSTATSTYPE));
+#if defined HAVE_STRUCT_STATVFS_F_FLAG
+		mp->read_only = fsp->f_flag & ST_RDONLY;
+#elif defined HAVE_STRUCT_STATFS_F_FLAGS
+		mp->read_only = fsp->f_flags & MNT_RDONLY;
+#endif
+
+		mount_points = alpm_list_add(mount_points, mp);
+	}
+#endif
+
+	mount_points = alpm_list_msort(mount_points, alpm_list_count(mount_points),
+			mount_point_cmp);
+	return(mount_points);
+}
+
+static alpm_mountpoint_t *match_mount_point(const alpm_list_t *mount_points,
+		const char *real_path)
+{
+	const alpm_list_t *mp;
+
+	for(mp = mount_points; mp != NULL; mp = mp->next) {
+		alpm_mountpoint_t *data = mp->data;
+
+		if(strncmp(data->mount_dir, real_path, data->mount_dir_len) == 0) {
+			return(data);
+		}
+	}
+
+	/* should not get here... */
+	return(NULL);
+}
+
+static int calculate_removed_size(const alpm_list_t *mount_points,
+		pmpkg_t *pkg)
+{
+	alpm_list_t *file;
+
+	alpm_list_t *files = alpm_pkg_get_files(pkg);
+	for(file = files; file; file = file->next) {
+		alpm_mountpoint_t *mp;
+		struct stat st;
+		char path[PATH_MAX];
+		const char *filename = file->data;
+
+		snprintf(path, PATH_MAX, "%s%s", handle->root, filename);
+		_alpm_lstat(path, &st);
+
+		/* skip directories and symlinks to be consistent with libarchive that
+		 * reports them to be zero size */
+		if(S_ISDIR(st.st_mode) || S_ISLNK(st.st_mode)) {
+			continue;
+		}
+
+		mp = match_mount_point(mount_points, path);
+		if(mp == NULL) {
+			_alpm_log(PM_LOG_WARNING,
+					_("could not determine mount point for file %s"), filename);
+			continue;
+		}
+
+		/* the addition of (divisor - 1) performs ceil() with integer division */
+		mp->blocks_needed -=
+			(st.st_size + mp->fsp.f_bsize - 1l) / mp->fsp.f_bsize;
+		mp->used |= USED_REMOVE;
+	}
+
+	return(0);
+}
+
+static int calculate_installed_size(const alpm_list_t *mount_points,
+		pmpkg_t *pkg)
+{
+	int ret=0;
+	struct archive *archive;
+	struct archive_entry *entry;
+
+	if ((archive = archive_read_new()) == NULL) {
+		pm_errno = PM_ERR_LIBARCHIVE;
+		ret = -1;
+		goto cleanup;
+	}
+
+	archive_read_support_compression_all(archive);
+	archive_read_support_format_all(archive);
+
+	if(archive_read_open_filename(archive, pkg->origin_data.file,
+				ARCHIVE_DEFAULT_BYTES_PER_BLOCK) != ARCHIVE_OK) {
+		pm_errno = PM_ERR_PKG_OPEN;
+		ret = -1;
+		goto cleanup;
+	}
+
+	while(archive_read_next_header(archive, &entry) == ARCHIVE_OK) {
+		alpm_mountpoint_t *mp;
+		const char *filename;
+		mode_t mode;
+		char path[PATH_MAX];
+
+		filename = archive_entry_pathname(entry);
+		mode = archive_entry_mode(entry);
+
+		/* libarchive reports these as zero size anyways */
+		/* NOTE: if we do start accounting for directory size, a dir matching a
+		 * mountpoint needs to be attributed to the parent, not the mountpoint. */
+		if(S_ISDIR(mode) || S_ISLNK(mode)) {
+			continue;
+		}
+
+		/* approximate space requirements for db entries */
+		if(filename[0] == '.') {
+			filename = alpm_option_get_dbpath();
+		}
+
+		snprintf(path, PATH_MAX, "%s%s", handle->root, filename);
+
+		mp = match_mount_point(mount_points, path);
+		if(mp == NULL) {
+			_alpm_log(PM_LOG_WARNING,
+					_("could not determine mount point for file %s"), filename);
+			continue;
+		}
+
+		/* the addition of (divisor - 1) performs ceil() with integer division */
+		mp->blocks_needed +=
+			(archive_entry_size(entry) + mp->fsp.f_bsize - 1l) / mp->fsp.f_bsize;
+		mp->used |= USED_INSTALL;
+
+		if(archive_read_data_skip(archive)) {
+			_alpm_log(PM_LOG_ERROR, _("error while reading package %s: %s\n"),
+					pkg->name, archive_error_string(archive));
+			pm_errno = PM_ERR_LIBARCHIVE;
+			break;
+		}
+	}
+
+	archive_read_finish(archive);
+
+cleanup:
+	return(ret);
+}
+
+int _alpm_check_diskspace(pmtrans_t *trans, pmdb_t *db_local)
+{
+	alpm_list_t *mount_points, *i;
+	size_t replaces = 0, current = 0, numtargs;
+	int abort = 0;
+	alpm_list_t *targ;
+
+	numtargs = alpm_list_count(trans->add);
+	mount_points = mount_point_list();
+	if(mount_points == NULL) {
+		_alpm_log(PM_LOG_ERROR, _("could not determine filesystem mount points"));
+		return(-1);
+	}
+
+	replaces = alpm_list_count(trans->remove);
+	if(replaces) {
+		numtargs += replaces;
+		for(targ = trans->remove; targ; targ = targ->next, current++) {
+			pmpkg_t *local_pkg;
+			int percent = (current * 100) / numtargs;
+			PROGRESS(trans, PM_TRANS_PROGRESS_DISKSPACE_START, "", percent,
+					numtargs, current);
+
+			local_pkg = targ->data;
+			calculate_removed_size(mount_points, local_pkg);
+		}
+	}
+
+	for(targ = trans->add; targ; targ = targ->next, current++) {
+		pmpkg_t *pkg, *local_pkg;
+		int percent = (current * 100) / numtargs;
+		PROGRESS(trans, PM_TRANS_PROGRESS_DISKSPACE_START, "", percent,
+				numtargs, current);
+
+		pkg = targ->data;
+		/* is this package already installed? */
+		local_pkg = _alpm_db_get_pkgfromcache(db_local, pkg->name);
+		if(local_pkg) {
+			calculate_removed_size(mount_points, local_pkg);
+		}
+		calculate_installed_size(mount_points, pkg);
+
+		for(i = mount_points; i; i = alpm_list_next(i)) {
+			alpm_mountpoint_t *data = i->data;
+			if(data->blocks_needed > data->max_blocks_needed) {
+				data->max_blocks_needed = data->blocks_needed;
+			}
+		}
+	}
+
+	PROGRESS(trans, PM_TRANS_PROGRESS_DISKSPACE_START, "", 100,
+			numtargs, current);
+
+	for(i = mount_points; i; i = alpm_list_next(i)) {
+		alpm_mountpoint_t *data = i->data;
+		if(data->used && data->read_only) {
+			_alpm_log(PM_LOG_ERROR, _("Partition %s is mounted read only\n"),
+					data->mount_dir);
+			abort = 1;
+		} else if(data->used & USED_INSTALL) {
+			/* cushion is roughly min(5% capacity, 20MiB) */
+			long fivepc = ((long)data->fsp.f_blocks / 20) + 1;
+			long twentymb = (20 * 1024 * 1024 / (long)data->fsp.f_bsize) + 1;
+			long cushion = fivepc < twentymb ? fivepc : twentymb;
+
+			_alpm_log(PM_LOG_DEBUG, "partition %s, needed %ld, cushion %ld, free %ld\n",
+					data->mount_dir, data->max_blocks_needed, cushion,
+					(unsigned long)data->fsp.f_bfree);
+			if(data->max_blocks_needed + cushion >= 0 &&
+			   (unsigned long)(data->max_blocks_needed + cushion) > data->fsp.f_bfree) {
+				_alpm_log(PM_LOG_ERROR, _("Partition %s too full: %ld blocks needed, %ld blocks free\n"),
+						data->mount_dir, data->max_blocks_needed + cushion,
+						(unsigned long)data->fsp.f_bfree);
+				abort = 1;
+			}
+		}
+	}
+
+	for(i = mount_points; i; i = alpm_list_next(i)) {
+		alpm_mountpoint_t *data = i->data;
+		FREE(data->mount_dir);
+	}
+	FREELIST(mount_points);
+
+	if(abort) {
+		RET_ERR(PM_ERR_DISK_SPACE, -1);
+	}
+
+	return(0);
+}
+
+/* vim: set ts=2 sw=2 noet: */

lib/libalpm/diskspace.h

@@ -0,0 +1,53 @@
+/*
+ *  diskspace.h
+ *
+ *  Copyright (c) 2010-2011 Pacman Development Team <pacman-dev@archlinux.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _ALPM_DISKSPACE_H
+#define _ALPM_DISKSPACE_H
+
+#if defined(HAVE_SYS_MOUNT_H)
+#include <sys/mount.h>
+#endif
+#if defined(HAVE_SYS_STATVFS_H)
+#include <sys/statvfs.h>
+#endif
+
+#include "alpm.h"
+
+enum mount_used_level {
+	USED_REMOVE = 1,
+	USED_INSTALL = (1 << 1),
+};
+
+typedef struct __alpm_mountpoint_t {
+	/* mount point information */
+	char *mount_dir;
+	size_t mount_dir_len;
+	/* storage for additional disk usage calculations */
+	long blocks_needed;
+	long max_blocks_needed;
+	enum mount_used_level used;
+	int read_only;
+	FSSTATSTYPE fsp;
+} alpm_mountpoint_t;
+
+int _alpm_check_diskspace(pmtrans_t *trans, pmdb_t *db_local);
+
+#endif /* _ALPM_DISKSPACE_H */
+
+/* vim: set ts=2 sw=2 noet: */

lib/libalpm/dload.c

@@ -1,7 +1,7 @@
 /*
  *  download.c
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -25,17 +25,17 @@
 #include <errno.h>
 #include <string.h>
 #include <unistd.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <sys/stat.h>
 #include <signal.h>
-#include <limits.h>
-/* the following two are needed on BSD for libfetch */
-#if defined(HAVE_SYS_SYSLIMITS_H)
-#include <sys/syslimits.h> /* PATH_MAX */
-#endif
+/* the following two are needed for FreeBSD's libfetch */
+#include <limits.h> /* PATH_MAX */
 #if defined(HAVE_SYS_PARAM_H)
 #include <sys/param.h> /* MAXHOSTNAMELEN */
 #endif
 
-#if defined(INTERNAL_DOWNLOAD)
+#ifdef HAVE_LIBFETCH
 #include <fetch.h>
 #endif
 
@@ -55,11 +55,11 @@ static char *get_filename(const char *url) {
 	return(filename);
 }
 
-#if defined(INTERNAL_DOWNLOAD)
+#ifdef HAVE_LIBFETCH
 static char *get_destfile(const char *path, const char *filename) {
 	char *destfile;
 	/* len = localpath len + filename len + null */
-	int len = strlen(path) + strlen(filename) + 1;
+	size_t len = strlen(path) + strlen(filename) + 1;
 	CALLOC(destfile, len, sizeof(char), RET_ERR(PM_ERR_MEMORY, NULL));
 	snprintf(destfile, len, "%s%s", path, filename);
 
@@ -69,127 +69,169 @@ static char *get_destfile(const char *path, const char *filename) {
 static char *get_tempfile(const char *path, const char *filename) {
 	char *tempfile;
 	/* len = localpath len + filename len + '.part' len + null */
-	int len = strlen(path) + strlen(filename) + 6;
+	size_t len = strlen(path) + strlen(filename) + 6;
 	CALLOC(tempfile, len, sizeof(char), RET_ERR(PM_ERR_MEMORY, NULL));
 	snprintf(tempfile, len, "%s%s.part", path, filename);
 
 	return(tempfile);
 }
 
-/* Build a 'struct url' from an url. */
-static struct url *url_for_string(const char *url)
+static const char *gethost(struct url *fileurl)
 {
-	struct url *ret = NULL;
-	ret = fetchParseURL(url);
-	if(!ret) {
-		_alpm_log(PM_LOG_ERROR, _("url '%s' is invalid\n"), url);
-		RET_ERR(PM_ERR_SERVER_BAD_URL, NULL);
+	const char *host = _("disk");
+	if(strcmp(SCHEME_FILE, fileurl->scheme) != 0) {
+		host = fileurl->host;
 	}
-
-	/* if no URL scheme specified, assume HTTP */
-	if(strlen(ret->scheme) == 0) {
-		_alpm_log(PM_LOG_WARNING, _("url scheme not specified, assuming HTTP\n"));
-		strcpy(ret->scheme, SCHEME_HTTP);
-	}
-	/* add a user & password for anonymous FTP */
-	if(strcmp(ret->scheme,SCHEME_FTP) == 0 && strlen(ret->user) == 0) {
-		strcpy(ret->user, "anonymous");
-		strcpy(ret->pwd, "libalpm@guest");
-	}
-
-	return(ret);
+	return(host);
 }
 
-static int download_internal(const char *url, const char *localpath,
-		time_t mtimeold, time_t *mtimenew) {
-	fetchIO *dlf = NULL;
-	FILE *localf = NULL;
-	struct url_stat ust;
-	struct stat st;
-	int chk_resume = 0, ret = 0;
-	size_t dl_thisfile = 0, nread = 0;
-	char *tempfile, *destfile, *filename;
-	struct sigaction new_action, old_action;
-	struct url *fileurl = url_for_string(url);
-	char buffer[PM_DLBUF_LEN];
+int dload_interrupted;
+static void inthandler(int signum)
+{
+	dload_interrupted = 1;
+}
 
-	if(!fileurl) {
-		return(-1);
-	}
+#define check_stop() if(dload_interrupted) { ret = -1; goto cleanup; }
+enum sighandlers { OLD = 0, NEW = 1 };
+
+static int download_internal(const char *url, const char *localpath,
+		int force) {
+	FILE *localf = NULL;
+	struct stat st;
+	int ret = 0;
+	off_t dl_thisfile = 0;
+	ssize_t nread = 0;
+	char *tempfile, *destfile, *filename;
+	struct sigaction sig_pipe[2], sig_int[2];
+
+	off_t local_size = 0;
+	time_t local_time = 0;
+
+	struct url *fileurl;
+	struct url_stat ust;
+	fetchIO *dlf = NULL;
+
+	char buffer[PM_DLBUF_LEN];
 
 	filename = get_filename(url);
 	if(!filename) {
-		return(-1);
+		_alpm_log(PM_LOG_ERROR, _("url '%s' is invalid\n"), url);
+		RET_ERR(PM_ERR_SERVER_BAD_URL, -1);
 	}
+
+	fileurl = fetchParseURL(url);
+	if(!fileurl) {
+		_alpm_log(PM_LOG_ERROR, _("url '%s' is invalid\n"), url);
+		RET_ERR(PM_ERR_LIBFETCH, -1);
+	}
+
 	destfile = get_destfile(localpath, filename);
 	tempfile = get_tempfile(localpath, filename);
 
-	/* pass the raw filename for passing to the callback function */
-	_alpm_log(PM_LOG_DEBUG, "using '%s' for download progress\n", filename);
-
-	if(stat(tempfile, &st) == 0 && st.st_size > 0) {
-		_alpm_log(PM_LOG_DEBUG, "existing file found, using it\n");
-		fileurl->offset = (off_t)st.st_size;
+	if(stat(tempfile, &st) == 0 && S_ISREG(st.st_mode) && st.st_size > 0) {
+		_alpm_log(PM_LOG_DEBUG, "tempfile found, attempting continuation\n");
+		local_time = fileurl->last_modified = st.st_mtime;
+		local_size = fileurl->offset = (off_t)st.st_size;
 		dl_thisfile = st.st_size;
 		localf = fopen(tempfile, "ab");
-		chk_resume = 1;
+	} else if(!force && stat(destfile, &st) == 0 && S_ISREG(st.st_mode) && st.st_size > 0) {
+		_alpm_log(PM_LOG_DEBUG, "destfile found, using mtime only\n");
+		local_time = fileurl->last_modified = st.st_mtime;
+		local_size = /* no fu->off here */ (off_t)st.st_size;
 	} else {
-		fileurl->offset = (off_t)0;
-		dl_thisfile = 0;
+		_alpm_log(PM_LOG_DEBUG, "no file found matching criteria, starting from scratch\n");
 	}
 
+	/* pass the raw filename for passing to the callback function */
+	_alpm_log(PM_LOG_DEBUG, "using '%s' for download progress\n", filename);
+
 	/* print proxy info for debug purposes */
 	_alpm_log(PM_LOG_DEBUG, "HTTP_PROXY: %s\n", getenv("HTTP_PROXY"));
 	_alpm_log(PM_LOG_DEBUG, "http_proxy: %s\n", getenv("http_proxy"));
 	_alpm_log(PM_LOG_DEBUG, "FTP_PROXY:  %s\n", getenv("FTP_PROXY"));
 	_alpm_log(PM_LOG_DEBUG, "ftp_proxy:  %s\n", getenv("ftp_proxy"));
 
-	/* libfetch does not reset the error code */
-	fetchLastErrCode = 0;
-
-	/* 10s timeout - TODO make a config option */
-	fetchTimeout = 10000;
+	/* 10s timeout */
+	fetchTimeout = 10;
 
 	/* ignore any SIGPIPE signals- these may occur if our FTP socket dies or
 	 * something along those lines. Store the old signal handler first. */
-	new_action.sa_handler = SIG_IGN;
-	sigemptyset(&new_action.sa_mask);
-	sigaction(SIGPIPE, NULL, &old_action);
-	sigaction(SIGPIPE, &new_action, NULL);
+	sig_pipe[NEW].sa_handler = SIG_IGN;
+	sigemptyset(&sig_pipe[NEW].sa_mask);
+	sig_pipe[NEW].sa_flags = 0;
+	sigaction(SIGPIPE, NULL, &sig_pipe[OLD]);
+	sigaction(SIGPIPE, &sig_pipe[NEW], NULL);
 
-	dlf = fetchXGet(fileurl, &ust, (handle->nopassiveftp ? "" : "p"));
+	dload_interrupted = 0;
+	sig_int[NEW].sa_handler = &inthandler;
+	sigemptyset(&sig_int[NEW].sa_mask);
+	sig_int[NEW].sa_flags = 0;
+	sigaction(SIGINT, NULL, &sig_int[OLD]);
+	sigaction(SIGINT, &sig_int[NEW], NULL);
 
-	if(fetchLastErrCode != 0 || dlf == NULL) {
-		const char *host = _("disk");
-		if(strcmp(SCHEME_FILE, fileurl->scheme) != 0) {
-			host = fileurl->host;
-		}
+	/* NOTE: libfetch does not reset the error code, be sure to do it before
+	 * calls into the library */
+
+	/* TODO: if we call fetchStat() and get a redirect (disabling automagic
+	 * redirect following), we should repeat the file locator stuff and get a new
+	 * filename rather than only base if off the first URL, and then verify
+	 * get_filename() didn't return ''. Of course, libfetch might not even allow
+	 * us to even get that URL...FS#22645. This would allow us to download things
+	 * without totally puking like
+	 * http://www.archlinux.org/packages/community/x86_64/exim/download/ */
+
+	/* find out the remote size *and* mtime in one go. there is a lot of
+	 * trouble in trying to do both size and "if-modified-since" logic in a
+	 * non-stat request, so avoid it. */
+	fetchLastErrCode = 0;
+	if(fetchStat(fileurl, &ust, "") == -1) {
 		pm_errno = PM_ERR_LIBFETCH;
 		_alpm_log(PM_LOG_ERROR, _("failed retrieving file '%s' from %s : %s\n"),
-				filename, host, fetchLastErrString);
+				filename, gethost(fileurl), fetchLastErrString);
+		ret = -1;
+		goto cleanup;
+	}
+	check_stop();
+
+	_alpm_log(PM_LOG_DEBUG, "ust.mtime: %ld local_time: %ld compare: %ld\n",
+			ust.mtime, local_time, local_time - ust.mtime);
+	_alpm_log(PM_LOG_DEBUG, "ust.size: %jd local_size: %jd compare: %jd\n",
+			(intmax_t)ust.size, (intmax_t)local_size, (intmax_t)(local_size - ust.size));
+	if(!force && ust.mtime && ust.mtime == local_time
+			&& ust.size && ust.size == local_size) {
+		/* the remote time and size values agreed with what we have, so move on
+		 * because there is nothing more to do. */
+		_alpm_log(PM_LOG_DEBUG, "files are identical, skipping %s\n", filename);
+		ret = 1;
+		goto cleanup;
+	}
+	if(!ust.mtime || ust.mtime != local_time) {
+		_alpm_log(PM_LOG_DEBUG, "mtimes were different or unavailable, downloading %s from beginning\n", filename);
+		fileurl->offset = 0;
+	}
+
+	fetchLastErrCode = 0;
+	dlf = fetchGet(fileurl, "");
+	check_stop();
+
+	if(fetchLastErrCode != 0 || dlf == NULL) {
+		pm_errno = PM_ERR_LIBFETCH;
+		_alpm_log(PM_LOG_ERROR, _("failed retrieving file '%s' from %s : %s\n"),
+				filename, gethost(fileurl), fetchLastErrString);
 		ret = -1;
 		goto cleanup;
 	} else {
 		_alpm_log(PM_LOG_DEBUG, "connected to %s successfully\n", fileurl->host);
 	}
 
-	if(ust.mtime && mtimeold && ust.mtime == mtimeold) {
-		_alpm_log(PM_LOG_DEBUG, "mtimes are identical, skipping %s\n", filename);
-		ret = 1;
-		goto cleanup;
+	if(localf && fileurl->offset == 0) {
+		_alpm_log(PM_LOG_WARNING, _("resuming download of %s not possible; starting over\n"), filename);
+		fclose(localf);
+		localf = NULL;
+	} else if(fileurl->offset) {
+		_alpm_log(PM_LOG_DEBUG, "resuming download at position %jd\n", (intmax_t)fileurl->offset);
 	}
 
-	if(ust.mtime && mtimenew) {
-		*mtimenew = ust.mtime;
-	}
-
-	if(chk_resume && fileurl->offset == 0) {
-		_alpm_log(PM_LOG_WARNING, _("cannot resume download, starting over\n"));
-		if(localf != NULL) {
-			fclose(localf);
-			localf = NULL;
-		}
-	}
 
 	if(localf == NULL) {
 		_alpm_rmrf(tempfile);
@@ -197,7 +239,9 @@ static int download_internal(const char *url, const char *localpath,
 		dl_thisfile = 0;
 		localf = fopen(tempfile, "wb");
 		if(localf == NULL) { /* still null? */
-			_alpm_log(PM_LOG_ERROR, _("cannot write to file '%s'\n"), tempfile);
+			pm_errno = PM_ERR_RETRIEVE;
+			_alpm_log(PM_LOG_ERROR, _("error writing to file '%s': %s\n"),
+					tempfile, strerror(errno));
 			ret = -1;
 			goto cleanup;
 		}
@@ -209,15 +253,15 @@ static int download_internal(const char *url, const char *localpath,
 	}
 
 	while((nread = fetchIO_read(dlf, buffer, PM_DLBUF_LEN)) > 0) {
+		check_stop();
 		size_t nwritten = 0;
-		while(nwritten < nread) {
-			nwritten += fwrite(buffer, 1, (nread - nwritten), localf);
-			if(ferror(localf)) {
-				_alpm_log(PM_LOG_ERROR, _("error writing to file '%s': %s\n"),
-						destfile, strerror(errno));
-				ret = -1;
-				goto cleanup;
-			}
+		nwritten = fwrite(buffer, 1, (size_t)nread, localf);
+		if((nwritten != (size_t)nread) || ferror(localf)) {
+			pm_errno = PM_ERR_RETRIEVE;
+			_alpm_log(PM_LOG_ERROR, _("error writing to file '%s': %s\n"),
+					tempfile, strerror(errno));
+			ret = -1;
+			goto cleanup;
 		}
 		dl_thisfile += nread;
 
@@ -227,8 +271,17 @@ static int download_internal(const char *url, const char *localpath,
 	}
 
 	/* did the transfer complete normally? */
+	if (nread == -1) {
+		/* not PM_ERR_LIBFETCH here because libfetch error string might be empty */
+		pm_errno = PM_ERR_RETRIEVE;
+		_alpm_log(PM_LOG_ERROR, _("failed retrieving file '%s' from %s\n"),
+				filename, gethost(fileurl));
+		ret = -1;
+		goto cleanup;
+	}
+
 	if (ust.size != -1 && dl_thisfile < ust.size) {
-		pm_errno = PM_ERR_LIBFETCH;
+		pm_errno = PM_ERR_RETRIEVE;
 		_alpm_log(PM_LOG_ERROR, _("%s appears to be truncated: %jd/%jd bytes\n"),
 				filename, (intmax_t)dl_thisfile, (intmax_t)ust.size);
 		ret = -1;
@@ -243,36 +296,64 @@ static int download_internal(const char *url, const char *localpath,
 	fetchIO_close(dlf);
 	dlf = NULL;
 
-	rename(tempfile, destfile);
+	/* set the times on the file to the same as that of the remote file */
+	if(ust.mtime) {
+		struct timeval tv[2];
+		memset(&tv, 0, sizeof(tv));
+		tv[0].tv_sec = ust.atime;
+		tv[1].tv_sec = ust.mtime;
+		utimes(tempfile, tv);
+	}
+	if(rename(tempfile, destfile)) {
+		_alpm_log(PM_LOG_ERROR, _("could not rename %s to %s (%s)\n"),
+				tempfile, destfile, strerror(errno));
+		ret = -1;
+	}
 	ret = 0;
 
 cleanup:
-	/* restore any existing SIGPIPE signal handler */
-	sigaction(SIGPIPE, &old_action, NULL);
-
 	FREE(tempfile);
 	FREE(destfile);
 	if(localf != NULL) {
+		/* if we still had a local file open, we got interrupted. set the mtimes on
+		 * the file accordingly. */
+		fflush(localf);
+		if(ust.mtime) {
+			struct timeval tv[2];
+			memset(&tv, 0, sizeof(tv));
+			tv[0].tv_sec = ust.atime;
+			tv[1].tv_sec = ust.mtime;
+			futimes(fileno(localf), tv);
+		}
 		fclose(localf);
 	}
 	if(dlf != NULL) {
 		fetchIO_close(dlf);
 	}
 	fetchFreeURL(fileurl);
+
+	/* restore the old signal handlers */
+	sigaction(SIGINT, &sig_int[OLD], NULL);
+	sigaction(SIGPIPE, &sig_pipe[OLD], NULL);
+	/* if we were interrupted, trip the old handler */
+	if(dload_interrupted) {
+		raise(SIGINT);
+	}
+
 	return(ret);
 }
 #endif
 
 static int download(const char *url, const char *localpath,
-		time_t mtimeold, time_t *mtimenew) {
+		int force) {
 	if(handle->fetchcb == NULL) {
-#if defined(INTERNAL_DOWNLOAD)
-		return(download_internal(url, localpath, mtimeold, mtimenew));
+#ifdef HAVE_LIBFETCH
+		return(download_internal(url, localpath, force));
 #else
 		RET_ERR(PM_ERR_EXTERNAL_DOWNLOAD, -1);
 #endif
 	} else {
-		int ret = handle->fetchcb(url, localpath, mtimeold, mtimenew);
+		int ret = handle->fetchcb(url, localpath, force);
 		if(ret == -1) {
 			RET_ERR(PM_ERR_EXTERNAL_DOWNLOAD, -1);
 		}
@@ -282,19 +363,15 @@ static int download(const char *url, const char *localpath,
 
 /*
  * Download a single file
- *   - if mtimeold is non-NULL, then only download the file if it's different
- *     than mtimeold.
- *   - if *mtimenew is non-NULL, it will be filled with the mtime of the remote
- *     file.
  *   - servers must be a list of urls WITHOUT trailing slashes.
  *
  * RETURN:  0 for successful download
- *          1 if the mtimes are identical
+ *          1 if the files are identical
  *         -1 on error
  */
 int _alpm_download_single_file(const char *filename,
 		alpm_list_t *servers, const char *localpath,
-		time_t mtimeold, time_t *mtimenew)
+		int force)
 {
 	alpm_list_t *i;
 	int ret = -1;
@@ -304,14 +381,14 @@ int _alpm_download_single_file(const char *filename,
 	for(i = servers; i; i = i->next) {
 		const char *server = i->data;
 		char *fileurl = NULL;
-		int len;
+		size_t len;
 
 		/* print server + filename into a buffer */
 		len = strlen(server) + strlen(filename) + 2;
 		CALLOC(fileurl, len, sizeof(char), RET_ERR(PM_ERR_MEMORY, -1));
 		snprintf(fileurl, len, "%s/%s", server, filename);
 
-		ret = download(fileurl, localpath, mtimeold, mtimenew);
+		ret = download(fileurl, localpath, force);
 		FREE(fileurl);
 		if(ret != -1) {
 			break;
@@ -330,7 +407,7 @@ int _alpm_download_files(alpm_list_t *files,
 	for(lp = files; lp; lp = lp->next) {
 		char *filename = lp->data;
 		if(_alpm_download_single_file(filename, servers,
-					localpath, 0, NULL) == -1) {
+					localpath, 0) == -1) {
 			ret++;
 		}
 	}
@@ -357,7 +434,7 @@ char SYMEXPORT *alpm_fetch_pkgurl(const char *url)
 	cachedir = _alpm_filecache_setup();
 
 	/* download the file */
-	ret = download(url, cachedir, 0, NULL);
+	ret = download(url, cachedir, 0);
 	if(ret == -1) {
 		_alpm_log(PM_LOG_WARNING, _("failed to download %s\n"), url);
 		return(NULL);

lib/libalpm/dload.h

@@ -1,7 +1,7 @@
 /*
  *  dload.h
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -25,11 +25,11 @@
 
 #include <time.h>
 
-#define PM_DLBUF_LEN (1024 * 10)
+#define PM_DLBUF_LEN (1024 * 16)
 
 int _alpm_download_single_file(const char *filename,
 		alpm_list_t *servers, const char *localpath,
-		time_t mtimeold, time_t *mtimenew);
+		int force);
 
 int _alpm_download_files(alpm_list_t *files,
 		alpm_list_t *servers, const char *localpath);

lib/libalpm/error.c

@@ -1,7 +1,7 @@
 /*
  *  error.c
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -22,16 +22,13 @@
 
 /* TODO: needed for the libfetch stuff, unfortunately- we should kill it */
 #include <stdio.h>
-#include <limits.h>
-/* the following two are needed on BSD for libfetch */
-#if defined(HAVE_SYS_SYSLIMITS_H)
-#include <sys/syslimits.h> /* PATH_MAX */
-#endif
+/* the following two are needed for FreeBSD's libfetch */
+#include <limits.h> /* PATH_MAX */
 #if defined(HAVE_SYS_PARAM_H)
 #include <sys/param.h> /* MAXHOSTNAMELEN */
 #endif
 
-#if defined(INTERNAL_DOWNLOAD)
+#ifdef HAVE_LIBFETCH
 #include <fetch.h> /* fetchLastErrString */
 #endif
 
@@ -60,6 +57,8 @@ const char SYMEXPORT *alpm_strerror(int err)
 			return _("could not find or read directory");
 		case PM_ERR_WRONG_ARGS:
 			return _("wrong or NULL argument passed");
+		case PM_ERR_DISK_SPACE:
+			return _("not enough free disk space");
 		/* Interface */
 		case PM_ERR_HANDLE_NULL:
 			return _("library not initialized");
@@ -78,6 +77,8 @@ const char SYMEXPORT *alpm_strerror(int err)
 			return _("database already registered");
 		case PM_ERR_DB_NOT_FOUND:
 			return _("could not find database");
+		case PM_ERR_DB_VERSION:
+			return _("database is incorrect version");
 		case PM_ERR_DB_WRITE:
 			return _("could not update database");
 		case PM_ERR_DB_REMOVE:
@@ -117,8 +118,10 @@ const char SYMEXPORT *alpm_strerror(int err)
 			return _("cannot remove all files for package");
 		case PM_ERR_PKG_INVALID_NAME:
 			return _("package filename is not valid");
+		case PM_ERR_PKG_INVALID_ARCH:
+			return _("package architecture is not valid");
 		case PM_ERR_PKG_REPO_NOT_FOUND:
-			return _("no such repository");
+			return _("could not find repository for target");
 		/* Deltas */
 		case PM_ERR_DLT_INVALID:
 			return _("invalid or corrupted delta");
@@ -134,6 +137,8 @@ const char SYMEXPORT *alpm_strerror(int err)
 		/* Miscellaenous */
 		case PM_ERR_RETRIEVE:
 			return _("failed to retrieve some files");
+		case PM_ERR_WRITE:
+			return _("failed to copy some file");
 		case PM_ERR_INVALID_REGEX:
 			return _("invalid regular expression");
 		/* Errors from external libraries- our own wrapper error */
@@ -143,7 +148,7 @@ const char SYMEXPORT *alpm_strerror(int err)
 			 * error string instead. */
 			return _("libarchive error");
 		case PM_ERR_LIBFETCH:
-#if defined(INTERNAL_DOWNLOAD)
+#ifdef HAVE_LIBFETCH
 			return fetchLastErrString;
 #else
 			/* obviously shouldn't get here... */

lib/libalpm/graph.h

@@ -1,7 +1,7 @@
 /*
  *  graph.h - helpful graph structure and setup/teardown methods
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -21,8 +21,7 @@
 #include <sys/types.h> /* off_t */
 
 #include "alpm_list.h"
-#include "util.h" /* MALLOC() */
-#include "alpm.h"
+#include "util.h" /* CALLOC() */
 
 struct __pmgraph_t {
 	char state; /* 0: untouched, -1: entered, other: leaving time */
@@ -38,15 +37,7 @@ static pmgraph_t *_alpm_graph_new(void)
 {
 	pmgraph_t *graph = NULL;
 
-	MALLOC(graph, sizeof(pmgraph_t), RET_ERR(PM_ERR_MEMORY, NULL));
-
-	if(graph) {
-		graph->state = 0;
-		graph->data = NULL;
-		graph->parent = NULL;
-		graph->children = NULL;
-		graph->childptr = NULL;
-	}
+	CALLOC(graph, 1, sizeof(pmgraph_t), RET_ERR(PM_ERR_MEMORY, NULL));
 	return(graph);
 }
 

lib/libalpm/group.c

@@ -1,7 +1,7 @@
 /*
  *  group.c
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify

lib/libalpm/group.h

@@ -1,7 +1,7 @@
 /*
  *  group.h
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify

lib/libalpm/handle.c

@@ -1,7 +1,7 @@
 /*
  *  handle.c
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *  Copyright (c) 2005 by Aurelien Foret <orelien@chez.com>
  *  Copyright (c) 2005, 2006 by Miklos Vajna <vmiklos@frugalware.org>
@@ -49,7 +49,6 @@ pmhandle_t *_alpm_handle_new()
 	ALPM_LOG_FUNC;
 
 	CALLOC(handle, 1, sizeof(pmhandle_t), RET_ERR(PM_ERR_MEMORY, NULL));
-	handle->lckfd = -1;
 
 	return(handle);
 }
@@ -79,6 +78,7 @@ void _alpm_handle_free(pmhandle_t *handle)
 	FREELIST(handle->cachedirs);
 	FREE(handle->logfile);
 	FREE(handle->lockfile);
+	FREE(handle->arch);
 	FREELIST(handle->dbs_sync);
 	FREELIST(handle->noupgrade);
 	FREELIST(handle->noextract);
@@ -168,7 +168,7 @@ const char SYMEXPORT *alpm_option_get_lockfile()
 	return handle->lockfile;
 }
 
-unsigned short SYMEXPORT alpm_option_get_usesyslog()
+int SYMEXPORT alpm_option_get_usesyslog()
 {
 	if (handle == NULL) {
 		pm_errno = PM_ERR_HANDLE_NULL;
@@ -213,13 +213,31 @@ alpm_list_t SYMEXPORT *alpm_option_get_ignoregrps()
 	return handle->ignoregrp;
 }
 
-unsigned short SYMEXPORT alpm_option_get_nopassiveftp()
+const char SYMEXPORT *alpm_option_get_arch()
+{
+	if (handle == NULL) {
+		pm_errno = PM_ERR_HANDLE_NULL;
+		return NULL;
+	}
+	return handle->arch;
+}
+
+int SYMEXPORT alpm_option_get_usedelta()
 {
 	if (handle == NULL) {
 		pm_errno = PM_ERR_HANDLE_NULL;
 		return -1;
 	}
-	return handle->nopassiveftp;
+	return handle->usedelta;
+}
+
+int SYMEXPORT alpm_option_get_checkspace()
+{
+	if (handle == NULL) {
+		pm_errno = PM_ERR_HANDLE_NULL;
+		return -1;
+	}
+	return handle->checkspace;
 }
 
 pmdb_t SYMEXPORT *alpm_option_get_localdb()
@@ -436,7 +454,7 @@ int SYMEXPORT alpm_option_set_logfile(const char *logfile)
 	return(0);
 }
 
-void SYMEXPORT alpm_option_set_usesyslog(unsigned short usesyslog)
+void SYMEXPORT alpm_option_set_usesyslog(int usesyslog)
 {
 	handle->usesyslog = usesyslog;
 }
@@ -529,14 +547,20 @@ int SYMEXPORT alpm_option_remove_ignoregrp(const char *grp)
 	return(0);
 }
 
-void SYMEXPORT alpm_option_set_nopassiveftp(unsigned short nopasv)
+void SYMEXPORT alpm_option_set_arch(const char *arch)
 {
-	handle->nopassiveftp = nopasv;
+	if(handle->arch) FREE(handle->arch);
+	if(arch) handle->arch = strdup(arch);
 }
 
-void SYMEXPORT alpm_option_set_usedelta(unsigned short usedelta)
+void SYMEXPORT alpm_option_set_usedelta(int usedelta)
 {
 	handle->usedelta = usedelta;
 }
 
+void SYMEXPORT alpm_option_set_checkspace(int checkspace)
+{
+	handle->checkspace = checkspace;
+}
+
 /* vim: set ts=2 sw=2 noet: */

lib/libalpm/handle.h

@@ -1,7 +1,7 @@
 /*
  *  handle.h
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -34,7 +34,7 @@ typedef struct _pmhandle_t {
 	pmdb_t *db_local;       /* local db pointer */
 	alpm_list_t *dbs_sync;  /* List of (pmdb_t *) */
 	FILE *logstream;        /* log file stream pointer */
-	int lckfd;              /* lock file descriptor if one exists */
+	FILE *lckstream;        /* lock file stream pointer if one exists */
 	pmtrans_t *trans;
 
 	/* callback functions */
@@ -57,15 +57,16 @@ typedef struct _pmhandle_t {
 	alpm_list_t *ignoregrp;   /* List of groups to ignore */
 
 	/* options */
-	unsigned short usesyslog;    /* Use syslog instead of logfile? */ /* TODO move to frontend */
-	unsigned short nopassiveftp; /* Don't use PASV ftp connections */
-	unsigned short usedelta;     /* Download deltas if possible */
+	int usesyslog;    /* Use syslog instead of logfile? */ /* TODO move to frontend */
+	char *arch;       /* Architecture of packages we should allow */
+	int usedelta;     /* Download deltas if possible */
+	int checkspace;   /* Check disk space before installing */
 } pmhandle_t;
 
 /* global handle variable */
 extern pmhandle_t *handle;
 
-pmhandle_t *_alpm_handle_new();
+pmhandle_t *_alpm_handle_new(void);
 void _alpm_handle_free(pmhandle_t *handle);
 
 #endif /* _ALPM_HANDLE_H */

lib/libalpm/log.c

@@ -1,7 +1,7 @@
 /*
  *  log.c
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -42,7 +42,7 @@
  * @param fmt output format
  * @return 0 on success, -1 on error (pm_errno is set accordingly)
  */
-int SYMEXPORT alpm_logaction(char *fmt, ...)
+int SYMEXPORT alpm_logaction(const char *fmt, ...)
 {
 	int ret;
 	va_list args;
@@ -88,7 +88,7 @@ int SYMEXPORT alpm_logaction(char *fmt, ...)
 
 /** @} */
 
-void _alpm_log(pmloglevel_t flag, char *fmt, ...)
+void _alpm_log(pmloglevel_t flag, const char *fmt, ...)
 {
 	va_list args;
 	alpm_cb_log logcb = alpm_option_get_logcb();

lib/libalpm/log.h

@@ -1,7 +1,7 @@
 /*
  *  log.h
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -29,7 +29,7 @@
 #define ALPM_LOG_FUNC
 #endif
 
-void _alpm_log(pmloglevel_t flag, char *fmt, ...) __attribute__((format(printf,2,3)));
+void _alpm_log(pmloglevel_t flag, const char *fmt, ...) __attribute__((format(printf,2,3)));
 
 #endif /* _ALPM_LOG_H */
 

lib/libalpm/md5.c

@@ -36,11 +36,17 @@
  *        int md5_file( char *path, unsigned char *output )
  *      to
  *        int md5_file( const char *path, unsigned char *output )
+ *  * use a dynamically-allocated buffer in md5_file, and increase the size
+ *    for performance reasons
  *  * various static/inline changes
+ *
+ *  NOTE: XySSL has been renamed to PolarSSL, which is available at
+ *  www.polarssl.org. If we update, we should get it from there.
  */
 
 #include <string.h>
 #include <stdio.h>
+#include <stdlib.h>
 
 #include "md5.h"
 
@@ -306,11 +312,16 @@ int md5_file( const char *path, unsigned char output[16] )
     FILE *f;
     size_t n;
     md5_context ctx;
-    unsigned char buf[1024];
+    unsigned char *buf;
 
-    if( ( f = fopen( path, "rb" ) ) == NULL )
+    if( ( buf = calloc(8192, sizeof(unsigned char)) ) == NULL )
         return( 1 );
 
+    if( ( f = fopen( path, "rb" ) ) == NULL ) {
+        free( buf );
+        return( 1 );
+    }
+
     md5_starts( &ctx );
 
     while( ( n = fread( buf, 1, sizeof( buf ), f ) ) > 0 )
@@ -319,6 +330,7 @@ int md5_file( const char *path, unsigned char output[16] )
     md5_finish( &ctx, output );
 
     memset( &ctx, 0, sizeof( md5_context ) );
+    free( buf );
 
     if( ferror( f ) != 0 )
     {

lib/libalpm/package.c

@@ -1,7 +1,7 @@
 /*
  *  package.c
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *  Copyright (c) 2005 by Aurelien Foret <orelien@chez.com>
  *  Copyright (c) 2005, 2006 by Christian Hamar <krics@linuxforum.hu>
@@ -25,24 +25,18 @@
 
 #include <stdio.h>
 #include <stdlib.h>
-#include <limits.h>
 #include <string.h>
 #include <ctype.h>
 #include <errno.h>
 #include <sys/types.h>
 #include <sys/stat.h>
 
-/* libarchive */
-#include <archive.h>
-#include <archive_entry.h>
-
 /* libalpm */
 #include "package.h"
 #include "alpm_list.h"
 #include "log.h"
 #include "util.h"
 #include "db.h"
-#include "cache.h"
 #include "delta.h"
 #include "handle.h"
 #include "deps.h"
@@ -63,7 +57,7 @@ int SYMEXPORT alpm_pkg_free(pmpkg_t *pkg)
 	ASSERT(pkg != NULL, RET_ERR(PM_ERR_WRONG_ARGS, -1));
 
 	/* Only free packages loaded in user space */
-	if(pkg->origin != PKG_FROM_CACHE) {
+	if(pkg->origin == PKG_FROM_FILE) {
 		_alpm_pkg_free(pkg);
 	}
 
@@ -83,8 +77,7 @@ int SYMEXPORT alpm_pkg_checkmd5sum(pmpkg_t *pkg)
 
 	ASSERT(pkg != NULL, RET_ERR(PM_ERR_WRONG_ARGS, -1));
 	/* We only inspect packages from sync repositories */
-	ASSERT(pkg->origin == PKG_FROM_CACHE, RET_ERR(PM_ERR_PKG_INVALID, -1));
-	ASSERT(pkg->origin_data.db != handle->db_local, RET_ERR(PM_ERR_PKG_INVALID, -1));
+	ASSERT(pkg->origin == PKG_FROM_SYNCDB, RET_ERR(PM_ERR_PKG_INVALID, -1));
 
 	fpath = _alpm_filecache_find(alpm_pkg_get_filename(pkg));
 
@@ -100,341 +93,189 @@ int SYMEXPORT alpm_pkg_checkmd5sum(pmpkg_t *pkg)
 	return(retval);
 }
 
+/* Default package accessor functions. These will get overridden by any
+ * backend logic that needs lazy access, such as the local database through
+ * a lazy-load cache. However, the defaults will work just fine for fully-
+ * populated package structures. */
+static const char *_pkg_get_filename(pmpkg_t *pkg)    { return pkg->filename; }
+static const char *_pkg_get_name(pmpkg_t *pkg)        { return pkg->name; }
+static const char *_pkg_get_version(pmpkg_t *pkg)     { return pkg->version; }
+static const char *_pkg_get_desc(pmpkg_t *pkg)        { return pkg->desc; }
+static const char *_pkg_get_url(pmpkg_t *pkg)         { return pkg->url; }
+static time_t _pkg_get_builddate(pmpkg_t *pkg)        { return pkg->builddate; }
+static time_t _pkg_get_installdate(pmpkg_t *pkg)      { return pkg->installdate; }
+static const char *_pkg_get_packager(pmpkg_t *pkg)    { return pkg->packager; }
+static const char *_pkg_get_md5sum(pmpkg_t *pkg)      { return pkg->md5sum; }
+static const char *_pkg_get_arch(pmpkg_t *pkg)        { return pkg->arch; }
+static off_t _pkg_get_size(pmpkg_t *pkg)              { return pkg->size; }
+static off_t _pkg_get_isize(pmpkg_t *pkg)             { return pkg->isize; }
+static pmpkgreason_t _pkg_get_reason(pmpkg_t *pkg)    { return pkg->reason; }
+static int _pkg_has_scriptlet(pmpkg_t *pkg)           { return pkg->scriptlet; }
+
+static alpm_list_t *_pkg_get_licenses(pmpkg_t *pkg)   { return pkg->licenses; }
+static alpm_list_t *_pkg_get_groups(pmpkg_t *pkg)     { return pkg->groups; }
+static alpm_list_t *_pkg_get_depends(pmpkg_t *pkg)    { return pkg->depends; }
+static alpm_list_t *_pkg_get_optdepends(pmpkg_t *pkg) { return pkg->optdepends; }
+static alpm_list_t *_pkg_get_conflicts(pmpkg_t *pkg)  { return pkg->conflicts; }
+static alpm_list_t *_pkg_get_provides(pmpkg_t *pkg)   { return pkg->provides; }
+static alpm_list_t *_pkg_get_replaces(pmpkg_t *pkg)   { return pkg->replaces; }
+static alpm_list_t *_pkg_get_deltas(pmpkg_t *pkg)     { return pkg->deltas; }
+static alpm_list_t *_pkg_get_files(pmpkg_t *pkg)      { return pkg->files; }
+static alpm_list_t *_pkg_get_backup(pmpkg_t *pkg)     { return pkg->backup; }
+
+/** The standard package operations struct. Get fields directly from the
+ * struct itself with no abstraction layer or any type of lazy loading.
+ */
+struct pkg_operations default_pkg_ops = {
+	.get_filename    = _pkg_get_filename,
+	.get_name        = _pkg_get_name,
+	.get_version     = _pkg_get_version,
+	.get_desc        = _pkg_get_desc,
+	.get_url         = _pkg_get_url,
+	.get_builddate   = _pkg_get_builddate,
+	.get_installdate = _pkg_get_installdate,
+	.get_packager    = _pkg_get_packager,
+	.get_md5sum      = _pkg_get_md5sum,
+	.get_arch        = _pkg_get_arch,
+	.get_size        = _pkg_get_size,
+	.get_isize       = _pkg_get_isize,
+	.get_reason      = _pkg_get_reason,
+	.has_scriptlet   = _pkg_has_scriptlet,
+	.get_licenses    = _pkg_get_licenses,
+	.get_groups      = _pkg_get_groups,
+	.get_depends     = _pkg_get_depends,
+	.get_optdepends  = _pkg_get_optdepends,
+	.get_conflicts   = _pkg_get_conflicts,
+	.get_provides    = _pkg_get_provides,
+	.get_replaces    = _pkg_get_replaces,
+	.get_deltas      = _pkg_get_deltas,
+	.get_files       = _pkg_get_files,
+	.get_backup      = _pkg_get_backup,
+};
+
+/* Public functions for getting package information. These functions
+ * delegate the hard work to the function callbacks attached to each
+ * package, which depend on where the package was loaded from. */
 const char SYMEXPORT *alpm_pkg_get_filename(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(NULL));
-	ASSERT(pkg != NULL, return(NULL));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DESC)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DESC);
-	}
-
-	return pkg->filename;
+	return pkg->ops->get_filename(pkg);
 }
 
 const char SYMEXPORT *alpm_pkg_get_name(pmpkg_t *pkg)
 {
-	ASSERT(pkg != NULL, return(NULL));
-	return pkg->name;
+	return pkg->ops->get_name(pkg);
 }
 
 const char SYMEXPORT *alpm_pkg_get_version(pmpkg_t *pkg)
 {
-	ASSERT(pkg != NULL, return(NULL));
-	return pkg->version;
+	return pkg->ops->get_version(pkg);
 }
 
 const char SYMEXPORT *alpm_pkg_get_desc(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(NULL));
-	ASSERT(pkg != NULL, return(NULL));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DESC)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DESC);
-	}
-	return pkg->desc;
+	return pkg->ops->get_desc(pkg);
 }
 
 const char SYMEXPORT *alpm_pkg_get_url(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(NULL));
-	ASSERT(pkg != NULL, return(NULL));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DESC)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DESC);
-	}
-	return pkg->url;
+	return pkg->ops->get_url(pkg);
 }
 
 time_t SYMEXPORT alpm_pkg_get_builddate(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(0));
-	ASSERT(pkg != NULL, return(0));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DESC)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DESC);
-	}
-	return pkg->builddate;
+	return pkg->ops->get_builddate(pkg);
 }
 
 time_t SYMEXPORT alpm_pkg_get_installdate(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(0));
-	ASSERT(pkg != NULL, return(0));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DESC)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DESC);
-	}
-	return pkg->installdate;
+	return pkg->ops->get_installdate(pkg);
 }
 
 const char SYMEXPORT *alpm_pkg_get_packager(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(NULL));
-	ASSERT(pkg != NULL, return(NULL));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DESC)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DESC);
-	}
-	return pkg->packager;
+	return pkg->ops->get_packager(pkg);
 }
 
 const char SYMEXPORT *alpm_pkg_get_md5sum(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(NULL));
-	ASSERT(pkg != NULL, return(NULL));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DESC)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DESC);
-	}
-	return pkg->md5sum;
+	return pkg->ops->get_md5sum(pkg);
 }
 
 const char SYMEXPORT *alpm_pkg_get_arch(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(NULL));
-	ASSERT(pkg != NULL, return(NULL));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DESC)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DESC);
-	}
-	return pkg->arch;
+	return pkg->ops->get_arch(pkg);
 }
 
 off_t SYMEXPORT alpm_pkg_get_size(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(-1));
-	ASSERT(pkg != NULL, return(-1));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DESC)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DESC);
-	}
-	return pkg->size;
+	return pkg->ops->get_size(pkg);
 }
 
 off_t SYMEXPORT alpm_pkg_get_isize(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(-1));
-	ASSERT(pkg != NULL, return(-1));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DESC)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DESC);
-	}
-	return pkg->isize;
+	return pkg->ops->get_isize(pkg);
 }
 
 pmpkgreason_t SYMEXPORT alpm_pkg_get_reason(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(-1));
-	ASSERT(pkg != NULL, return(-1));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DESC)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DESC);
-	}
-	return pkg->reason;
+	return pkg->ops->get_reason(pkg);
 }
 
 alpm_list_t SYMEXPORT *alpm_pkg_get_licenses(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(NULL));
-	ASSERT(pkg != NULL, return(NULL));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DESC)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DESC);
-	}
-	return pkg->licenses;
+	return pkg->ops->get_licenses(pkg);
 }
 
 alpm_list_t SYMEXPORT *alpm_pkg_get_groups(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(NULL));
-	ASSERT(pkg != NULL, return(NULL));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DESC)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DESC);
-	}
-	return pkg->groups;
-}
-
-unsigned short SYMEXPORT alpm_pkg_has_force(pmpkg_t *pkg)
-{
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(-1));
-	ASSERT(pkg != NULL, return(-1));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DESC)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DESC);
-	}
-	return pkg->force;
+	return pkg->ops->get_groups(pkg);
 }
 
 alpm_list_t SYMEXPORT *alpm_pkg_get_depends(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(NULL));
-	ASSERT(pkg != NULL, return(NULL));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DEPENDS)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DEPENDS);
-	}
-	return pkg->depends;
+	return pkg->ops->get_depends(pkg);
 }
 
 alpm_list_t SYMEXPORT *alpm_pkg_get_optdepends(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(NULL));
-	ASSERT(pkg != NULL, return(NULL));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DEPENDS)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DEPENDS);
-	}
-	return pkg->optdepends;
+	return pkg->ops->get_optdepends(pkg);
 }
 
 alpm_list_t SYMEXPORT *alpm_pkg_get_conflicts(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(NULL));
-	ASSERT(pkg != NULL, return(NULL));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DEPENDS)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DEPENDS);
-	}
-	return pkg->conflicts;
+	return pkg->ops->get_conflicts(pkg);
 }
 
 alpm_list_t SYMEXPORT *alpm_pkg_get_provides(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(NULL));
-	ASSERT(pkg != NULL, return(NULL));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DEPENDS)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DEPENDS);
-	}
-	return pkg->provides;
-}
-
-alpm_list_t SYMEXPORT *alpm_pkg_get_deltas(pmpkg_t *pkg)
-{
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(NULL));
-	ASSERT(pkg != NULL, return(NULL));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DELTAS)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DELTAS);
-	}
-	return pkg->deltas;
+	return pkg->ops->get_provides(pkg);
 }
 
 alpm_list_t SYMEXPORT *alpm_pkg_get_replaces(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
+	return pkg->ops->get_replaces(pkg);
+}
 
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(NULL));
-	ASSERT(pkg != NULL, return(NULL));
-
-	if(pkg->origin == PKG_FROM_CACHE && !(pkg->infolevel & INFRQ_DESC)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_DESC);
-	}
-	return pkg->replaces;
+alpm_list_t SYMEXPORT *alpm_pkg_get_deltas(pmpkg_t *pkg)
+{
+	return pkg->ops->get_deltas(pkg);
 }
 
 alpm_list_t SYMEXPORT *alpm_pkg_get_files(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(NULL));
-	ASSERT(pkg != NULL, return(NULL));
-
-	if(pkg->origin == PKG_FROM_CACHE && pkg->origin_data.db == handle->db_local
-		 && !(pkg->infolevel & INFRQ_FILES)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_FILES);
-	}
-	return pkg->files;
+	return pkg->ops->get_files(pkg);
 }
 
 alpm_list_t SYMEXPORT *alpm_pkg_get_backup(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(NULL));
-	ASSERT(pkg != NULL, return(NULL));
-
-	if(pkg->origin == PKG_FROM_CACHE && pkg->origin_data.db == handle->db_local
-		 && !(pkg->infolevel & INFRQ_FILES)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_FILES);
-	}
-	return pkg->backup;
-}
-
-alpm_list_t SYMEXPORT *alpm_pkg_get_removes(pmpkg_t *pkg)
-{
-	ASSERT(pkg != NULL, return(NULL));
-
-	return(pkg->removes);
+	return pkg->ops->get_backup(pkg);
 }
 
 pmdb_t SYMEXPORT *alpm_pkg_get_db(pmpkg_t *pkg)
 {
 	/* Sanity checks */
 	ASSERT(pkg != NULL, return(NULL));
-	ASSERT(pkg->origin == PKG_FROM_CACHE, return(NULL));
+	ASSERT(pkg->origin != PKG_FROM_FILE, return(NULL));
 
 	return(pkg->origin_data.db);
 }
@@ -448,84 +289,31 @@ pmdb_t SYMEXPORT *alpm_pkg_get_db(pmpkg_t *pkg)
  */
 void SYMEXPORT *alpm_pkg_changelog_open(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
-
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(NULL));
-	ASSERT(pkg != NULL, return(NULL));
-
-	if(pkg->origin == PKG_FROM_CACHE) {
-		char clfile[PATH_MAX];
-		snprintf(clfile, PATH_MAX, "%s/%s/%s-%s/changelog",
-				alpm_option_get_dbpath(),
-				alpm_db_get_name(handle->db_local),
-				alpm_pkg_get_name(pkg),
-				alpm_pkg_get_version(pkg));
-		return fopen(clfile, "r");
-	} else if(pkg->origin == PKG_FROM_FILE) {
-		struct archive *archive = NULL;
-		struct archive_entry *entry;
-		const char *pkgfile = pkg->origin_data.file;
-		int ret = ARCHIVE_OK;
-
-		if((archive = archive_read_new()) == NULL) {
-			RET_ERR(PM_ERR_LIBARCHIVE, NULL);
-		}
-
-		archive_read_support_compression_all(archive);
-		archive_read_support_format_all(archive);
-
-		if (archive_read_open_filename(archive, pkgfile,
-					ARCHIVE_DEFAULT_BYTES_PER_BLOCK) != ARCHIVE_OK) {
-			RET_ERR(PM_ERR_PKG_OPEN, NULL);
-		}
-
-		while((ret = archive_read_next_header(archive, &entry)) == ARCHIVE_OK) {
-			const char *entry_name = archive_entry_pathname(entry);
-
-			if(strcmp(entry_name, ".CHANGELOG") == 0) {
-				return(archive);
-			}
-		}
-		/* we didn't find a changelog */
-		archive_read_finish(archive);
-		errno = ENOENT;
-	}
-	return(NULL);
+	return pkg->ops->changelog_open(pkg);
 }
 
 /**
  * Read data from an open changelog 'file stream'. Similar to fread in
- * functionality, this function takes a buffer and amount of data to read.
+ * functionality, this function takes a buffer and amount of data to read. If an
+ * error occurs pm_errno will be set.
+ *
  * @param ptr a buffer to fill with raw changelog data
  * @param size the size of the buffer
  * @param pkg the package that the changelog is being read from
  * @param fp a 'file stream' to the package changelog
- * @return the number of characters read, or 0 if there is no more data
+ * @return the number of characters read, or 0 if there is no more data or an
+ * error occurred.
  */
 size_t SYMEXPORT alpm_pkg_changelog_read(void *ptr, size_t size,
 		const pmpkg_t *pkg, const void *fp)
 {
-	size_t ret = 0;
-	if(pkg->origin == PKG_FROM_CACHE) {
-		ret = fread(ptr, 1, size, (FILE*)fp);
-	} else if(pkg->origin == PKG_FROM_FILE) {
-		ret = archive_read_data((struct archive*)fp, ptr, size);
-	}
-	return(ret);
+	return pkg->ops->changelog_read(ptr, size, pkg, fp);
 }
 
 /*
 int SYMEXPORT alpm_pkg_changelog_feof(const pmpkg_t *pkg, void *fp)
 {
-	int ret = 0;
-	if(pkg->origin == PKG_FROM_CACHE) {
-		ret = feof((FILE*)fp);
-	} else if(pkg->origin == PKG_FROM_FILE) {
-		// note: this doesn't quite work, no feof in libarchive
-		ret = archive_read_data((struct archive*)fp, NULL, 0);
-	}
-	return(ret);
+	return pkg->ops->changelog_feof(pkg, fp);
 }
 */
 
@@ -539,28 +327,29 @@ int SYMEXPORT alpm_pkg_changelog_feof(const pmpkg_t *pkg, void *fp)
  */
 int SYMEXPORT alpm_pkg_changelog_close(const pmpkg_t *pkg, void *fp)
 {
-	int ret = 0;
-	if(pkg->origin == PKG_FROM_CACHE) {
-		ret = fclose((FILE*)fp);
-	} else if(pkg->origin == PKG_FROM_FILE) {
-		ret = archive_read_finish((struct archive *)fp);
-	}
-	return(ret);
+	return pkg->ops->changelog_close(pkg, fp);
 }
 
-unsigned short SYMEXPORT alpm_pkg_has_scriptlet(pmpkg_t *pkg)
+int SYMEXPORT alpm_pkg_has_scriptlet(pmpkg_t *pkg)
 {
-	ALPM_LOG_FUNC;
+	return pkg->ops->has_scriptlet(pkg);
+}
 
-	/* Sanity checks */
-	ASSERT(handle != NULL, return(-1));
-	ASSERT(pkg != NULL, return(-1));
-
-	if(pkg->origin == PKG_FROM_CACHE && pkg->origin_data.db == handle->db_local
-		 && !(pkg->infolevel & INFRQ_SCRIPTLET)) {
-		_alpm_db_read(pkg->origin_data.db, pkg, INFRQ_SCRIPTLET);
+static void find_requiredby(pmpkg_t *pkg, pmdb_t *db, alpm_list_t **reqs)
+{
+	const alpm_list_t *i;
+	for(i = _alpm_db_get_pkgcache(db); i; i = i->next) {
+		if(!i->data) {
+			continue;
+		}
+		pmpkg_t *cachepkg = i->data;
+		if(_alpm_dep_edge(cachepkg, pkg)) {
+			const char *cachepkgname = cachepkg->name;
+			if(alpm_list_find_str(*reqs, cachepkgname) == 0) {
+				*reqs = alpm_list_add(*reqs, strdup(cachepkgname));
+			}
+		}
 	}
-	return pkg->scriptlet;
 }
 
 /**
@@ -572,192 +361,29 @@ alpm_list_t SYMEXPORT *alpm_pkg_compute_requiredby(pmpkg_t *pkg)
 {
 	const alpm_list_t *i;
 	alpm_list_t *reqs = NULL;
+	pmdb_t *db;
 
-	pmdb_t *localdb = alpm_option_get_localdb();
-	for(i = _alpm_db_get_pkgcache(localdb); i; i = i->next) {
-		if(!i->data) {
-			continue;
-		}
-		pmpkg_t *cachepkg = i->data;
-		if(_alpm_dep_edge(cachepkg, pkg)) {
-			const char *cachepkgname = alpm_pkg_get_name(cachepkg);
-			reqs = alpm_list_add(reqs, strdup(cachepkgname));
+	if(pkg->origin == PKG_FROM_FILE) {
+		/* The sane option; search locally for things that require this. */
+		db = alpm_option_get_localdb();
+		find_requiredby(pkg, db, &reqs);
+	} else {
+		/* We have a DB package. if it is a local package, then we should
+		 * only search the local DB; else search all known sync databases. */
+		db = pkg->origin_data.db;
+		if(db->is_local) {
+			find_requiredby(pkg, db, &reqs);
+		} else {
+			for(i = handle->dbs_sync; i; i = i->next) {
+				db = i->data;
+				find_requiredby(pkg, db, &reqs);
+				reqs = alpm_list_msort(reqs, alpm_list_count(reqs), _alpm_str_cmp);
+			}
 		}
 	}
 	return(reqs);
 }
 
-/** Compare two version strings and determine which one is 'newer'.
- * Returns a value comparable to the way strcmp works. Returns 1
- * if a is newer than b, 0 if a and b are the same version, or -1
- * if b is newer than a.
- *
- * This function has been adopted from the rpmvercmp function located
- * at lib/rpmvercmp.c, and was most recently updated against rpm
- * version 4.4.2.3. Small modifications have been made to make it more
- * consistent with the libalpm coding style.
- *
- * Keep in mind that the pkgrel is only compared if it is available
- * on both versions handed to this function. For example, comparing
- * 1.5-1 and 1.5 will yield 0; comparing 1.5-1 and 1.5-2 will yield
- * -1 as expected. This is mainly for supporting versioned dependencies
- * that do not include the pkgrel.
- */
-int SYMEXPORT alpm_pkg_vercmp(const char *a, const char *b)
-{
-	char oldch1, oldch2;
-	char *str1, *str2;
-	char *ptr1, *ptr2;
-	char *one, *two;
-	int rc;
-	int isnum;
-	int ret = 0;
-
-	ALPM_LOG_FUNC;
-
-	/* libalpm added code. ensure our strings are not null */
-	if(!a) {
-		if(!b) return(0);
-		return(-1);
-	}
-	if(!b) return(1);
-
-	/* easy comparison to see if versions are identical */
-	if(strcmp(a, b) == 0) return(0);
-
-	str1 = strdup(a);
-	str2 = strdup(b);
-
-	one = str1;
-	two = str2;
-
-	/* loop through each version segment of str1 and str2 and compare them */
-	while(*one && *two) {
-		while(*one && !isalnum((int)*one)) one++;
-		while(*two && !isalnum((int)*two)) two++;
-
-		/* If we ran to the end of either, we are finished with the loop */
-		if(!(*one && *two)) break;
-
-		ptr1 = one;
-		ptr2 = two;
-
-		/* grab first completely alpha or completely numeric segment */
-		/* leave one and two pointing to the start of the alpha or numeric */
-		/* segment and walk ptr1 and ptr2 to end of segment */
-		if(isdigit((int)*ptr1)) {
-			while(*ptr1 && isdigit((int)*ptr1)) ptr1++;
-			while(*ptr2 && isdigit((int)*ptr2)) ptr2++;
-			isnum = 1;
-		} else {
-			while(*ptr1 && isalpha((int)*ptr1)) ptr1++;
-			while(*ptr2 && isalpha((int)*ptr2)) ptr2++;
-			isnum = 0;
-		}
-
-		/* save character at the end of the alpha or numeric segment */
-		/* so that they can be restored after the comparison */
-		oldch1 = *ptr1;
-		*ptr1 = '\0';
-		oldch2 = *ptr2;
-		*ptr2 = '\0';
-
-		/* this cannot happen, as we previously tested to make sure that */
-		/* the first string has a non-null segment */
-		if (one == ptr1) {
-			ret = -1;	/* arbitrary */
-			goto cleanup;
-		}
-
-		/* take care of the case where the two version segments are */
-		/* different types: one numeric, the other alpha (i.e. empty) */
-		/* numeric segments are always newer than alpha segments */
-		/* XXX See patch #60884 (and details) from bugzilla #50977. */
-		if (two == ptr2) {
-			ret = isnum ? 1 : -1;
-			goto cleanup;
-		}
-
-		if (isnum) {
-			/* this used to be done by converting the digit segments */
-			/* to ints using atoi() - it's changed because long  */
-			/* digit segments can overflow an int - this should fix that. */
-
-			/* throw away any leading zeros - it's a number, right? */
-			while (*one == '0') one++;
-			while (*two == '0') two++;
-
-			/* whichever number has more digits wins */
-			if (strlen(one) > strlen(two)) {
-				ret = 1;
-				goto cleanup;
-			}
-			if (strlen(two) > strlen(one)) {
-				ret = -1;
-				goto cleanup;
-			}
-		}
-
-		/* strcmp will return which one is greater - even if the two */
-		/* segments are alpha or if they are numeric.  don't return  */
-		/* if they are equal because there might be more segments to */
-		/* compare */
-		rc = strcmp(one, two);
-		if (rc) {
-			ret = rc < 1 ? -1 : 1;
-			goto cleanup;
-		}
-
-		/* restore character that was replaced by null above */
-		*ptr1 = oldch1;
-		one = ptr1;
-		*ptr2 = oldch2;
-		two = ptr2;
-
-		/* libalpm added code. check if version strings have hit the pkgrel
-		 * portion. depending on which strings have hit, take correct action.
-		 * this is all based on the premise that we only have one dash in
-		 * the version string, and it separates pkgver from pkgrel. */
-		if(*ptr1 == '-' && *ptr2 == '-') {
-			/* no-op, continue comparing since we are equivalent throughout */
-		} else if(*ptr1 == '-') {
-			/* ptr1 has hit the pkgrel and ptr2 has not. continue version
-			 * comparison after stripping the pkgrel from ptr1. */
-			*ptr1 = '\0';
-		} else if(*ptr2 == '-') {
-			/* ptr2 has hit the pkgrel and ptr1 has not. continue version
-			 * comparison after stripping the pkgrel from ptr2. */
-			*ptr2 = '\0';
-		}
-	}
-
-	/* this catches the case where all numeric and alpha segments have */
-	/* compared identically but the segment separating characters were */
-	/* different */
-	if ((!*one) && (!*two)) {
-		ret = 0;
-		goto cleanup;
-	}
-
-	/* the final showdown. we never want a remaining alpha string to
-	 * beat an empty string. the logic is a bit weird, but:
-	 * - if one is empty and two is not an alpha, two is newer.
-	 * - if one is an alpha, two is newer.
-	 * - otherwise one is newer.
-	 * */
-	if ( ( !*one && !isalpha((int)*two) )
-			|| isalpha((int)*one) ) {
-		ret = -1;
-	} else {
-		ret = 1;
-	}
-
-cleanup:
-	free(str1);
-	free(str2);
-	return(ret);
-}
-
 /** @} */
 
 pmpkg_t *_alpm_pkg_new(void)
@@ -780,6 +406,7 @@ pmpkg_t *_alpm_pkg_dup(pmpkg_t *pkg)
 
 	CALLOC(newpkg, 1, sizeof(pmpkg_t), RET_ERR(PM_ERR_MEMORY, NULL));
 
+	newpkg->name_hash = pkg->name_hash;
 	STRDUP(newpkg->filename, pkg->filename, RET_ERR(PM_ERR_MEMORY, newpkg));
 	STRDUP(newpkg->name, pkg->name, RET_ERR(PM_ERR_MEMORY, newpkg));
 	STRDUP(newpkg->version, pkg->version, RET_ERR(PM_ERR_MEMORY, newpkg));
@@ -793,7 +420,6 @@ pmpkg_t *_alpm_pkg_dup(pmpkg_t *pkg)
 	newpkg->size = pkg->size;
 	newpkg->isize = pkg->isize;
 	newpkg->scriptlet = pkg->scriptlet;
-	newpkg->force = pkg->force;
 	newpkg->reason = pkg->reason;
 
 	newpkg->licenses   = alpm_list_strdup(pkg->licenses);
@@ -811,6 +437,7 @@ pmpkg_t *_alpm_pkg_dup(pmpkg_t *pkg)
 
 	/* internal */
 	newpkg->origin = pkg->origin;
+	newpkg->ops = pkg->ops;
 	if(newpkg->origin == PKG_FROM_FILE) {
 		newpkg->origin_data.file = strdup(pkg->origin_data.file);
 	} else {
@@ -858,7 +485,11 @@ void _alpm_pkg_free(pmpkg_t *pkg)
 	FREE(pkg);
 }
 
-/* Free transaction specific fields */
+/* This function should be used when removing a target from upgrade/sync target list
+ * Case 1: If pkg is a loaded package file (PKG_FROM_FILE), it will be freed.
+ * Case 2: If pkg is a pkgcache entry (PKG_FROM_CACHE), it won't be freed,
+ *         only the transaction specific fields of pkg will be freed.
+ */
 void _alpm_pkg_free_trans(pmpkg_t *pkg)
 {
 	ALPM_LOG_FUNC;
@@ -867,25 +498,22 @@ void _alpm_pkg_free_trans(pmpkg_t *pkg)
 		return;
 	}
 
+	if(pkg->origin == PKG_FROM_FILE) {
+		_alpm_pkg_free(pkg);
+		return;
+	}
+
 	alpm_list_free(pkg->removes);
 	pkg->removes = NULL;
 }
 
-/* Is spkg an upgrade for locapkg? */
+/* Is spkg an upgrade for localpkg? */
 int _alpm_pkg_compare_versions(pmpkg_t *spkg, pmpkg_t *localpkg)
 {
-	int cmp = 0;
-
 	ALPM_LOG_FUNC;
 
-	cmp = alpm_pkg_vercmp(alpm_pkg_get_version(spkg),
+	return alpm_pkg_vercmp(alpm_pkg_get_version(spkg),
 			alpm_pkg_get_version(localpkg));
-
-	if(cmp < 0 && alpm_pkg_has_force(spkg)) {
-		cmp = 1;
-	}
-
-	return(cmp);
 }
 
 /* Helper function for comparing packages
@@ -894,7 +522,7 @@ int _alpm_pkg_cmp(const void *p1, const void *p2)
 {
 	pmpkg_t *pkg1 = (pmpkg_t *)p1;
 	pmpkg_t *pkg2 = (pmpkg_t *)p2;
-	return(strcmp(alpm_pkg_get_name(pkg1), alpm_pkg_get_name(pkg2)));
+	return(strcoll(pkg1->name, pkg2->name));
 }
 
 /* Test for existence of a package in a alpm_list_t*
@@ -903,6 +531,7 @@ int _alpm_pkg_cmp(const void *p1, const void *p2)
 pmpkg_t *_alpm_pkg_find(alpm_list_t *haystack, const char *needle)
 {
 	alpm_list_t *lp;
+	unsigned long needle_hash;
 
 	ALPM_LOG_FUNC;
 
@@ -910,11 +539,21 @@ pmpkg_t *_alpm_pkg_find(alpm_list_t *haystack, const char *needle)
 		return(NULL);
 	}
 
+	needle_hash = _alpm_hash_sdbm(needle);
+
 	for(lp = haystack; lp; lp = lp->next) {
 		pmpkg_t *info = lp->data;
 
-		if(info && strcmp(alpm_pkg_get_name(info), needle) == 0) {
-			return(info);
+		if(info) {
+			/* a zero hash will cause a fall-through just in case */
+			if(info->name_hash && info->name_hash != needle_hash) {
+				continue;
+			}
+
+			/* finally: we had hash match, verify string match */
+			if(strcmp(info->name, needle) == 0) {
+				return(info);
+			}
 		}
 	}
 	return(NULL);

lib/libalpm/package.h

@@ -1,7 +1,7 @@
 /*
  *  package.h
  *
- *  Copyright (c) 2006-2009 Pacman Development Team <pacman-dev@archlinux.org>
+ *  Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
  *  Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
  *  Copyright (c) 2005 by Aurelien Foret <orelien@chez.com>
  *  Copyright (c) 2006 by David Kimpe <dnaku@frugalware.org>
@@ -31,27 +31,92 @@
 #include "db.h"
 
 typedef enum _pmpkgfrom_t {
-	PKG_FROM_CACHE = 1,
-	PKG_FROM_FILE
+	PKG_FROM_FILE = 1,
+	PKG_FROM_LOCALDB,
+	PKG_FROM_SYNCDB
 } pmpkgfrom_t;
 
+/** Package operations struct. This struct contains function pointers to
+ * all methods used to access data in a package to allow for things such
+ * as lazy package intialization (such as used by the file backend). Each
+ * backend is free to define a stuct containing pointers to a specific
+ * implementation of these methods. Some backends may find using the
+ * defined default_pkg_ops struct to work just fine for their needs.
+ */
+struct pkg_operations {
+	const char *(*get_filename) (pmpkg_t *);
+	const char *(*get_name) (pmpkg_t *);
+	const char *(*get_version) (pmpkg_t *);
+	const char *(*get_desc) (pmpkg_t *);
+	const char *(*get_url) (pmpkg_t *);
+	time_t (*get_builddate) (pmpkg_t *);
+	time_t (*get_installdate) (pmpkg_t *);
+	const char *(*get_packager) (pmpkg_t *);
+	const char *(*get_md5sum) (pmpkg_t *);
+	const char *(*get_arch) (pmpkg_t *);
+	off_t (*get_size) (pmpkg_t *);
+	off_t (*get_isize) (pmpkg_t *);
+	pmpkgreason_t (*get_reason) (pmpkg_t *);
+	int (*has_scriptlet) (pmpkg_t *);
+
+	alpm_list_t *(*get_licenses) (pmpkg_t *);
+	alpm_list_t *(*get_groups) (pmpkg_t *);
+	alpm_list_t *(*get_depends) (pmpkg_t *);
+	alpm_list_t *(*get_optdepends) (pmpkg_t *);
+	alpm_list_t *(*get_conflicts) (pmpkg_t *);
+	alpm_list_t *(*get_provides) (pmpkg_t *);
+	alpm_list_t *(*get_replaces) (pmpkg_t *);
+	alpm_list_t *(*get_deltas) (pmpkg_t *);
+	alpm_list_t *(*get_files) (pmpkg_t *);
+	alpm_list_t *(*get_backup) (pmpkg_t *);
+
+	void *(*changelog_open) (pmpkg_t *);
+	size_t (*changelog_read) (void *, size_t, const pmpkg_t *, const void *);
+	int (*changelog_close) (const pmpkg_t *, void *);
+
+	/* still to add:
+	 * checkmd5sum() ?
+	 * compute_requiredby()
+	 */
+};
+
+/** The standard package operations struct. get fields directly from the
+ * struct itself with no abstraction layer or any type of lazy loading.
+ * The actual definition is in package.c so it can have access to the
+ * default accessor functions which are defined there.
+ */
+extern struct pkg_operations default_pkg_ops;
+
 struct __pmpkg_t {
+	unsigned long name_hash;
 	char *filename;
 	char *name;
 	char *version;
 	char *desc;
 	char *url;
-	time_t builddate;
-	time_t installdate;
 	char *packager;
 	char *md5sum;
 	char *arch;
+
+	time_t builddate;
+	time_t installdate;
+
 	off_t size;
 	off_t isize;
 	off_t download_size;
-	unsigned short scriptlet;
-	unsigned short force;
+
+	int scriptlet;
+
 	pmpkgreason_t reason;
+	pmpkgfrom_t origin;
+	/* origin == PKG_FROM_FILE, use pkg->origin_data.file
+	 * origin == PKG_FROM_*DB, use pkg->origin_data.db */
+	union {
+		pmdb_t *db;
+		char *file;
+	} origin_data;
+	pmdbinfrq_t infolevel;
+
 	alpm_list_t *licenses;
 	alpm_list_t *replaces;
 	alpm_list_t *groups;
@@ -64,17 +129,8 @@ struct __pmpkg_t {
 	alpm_list_t *deltas;
 	alpm_list_t *delta_path;
 	alpm_list_t *removes; /* in transaction targets only */
-	/* internal */
-	pmpkgfrom_t origin;
-	/* Replaced 'void *data' with this union as follows:
-  origin == PKG_FROM_CACHE, use pkg->origin_data.db
-  origin == PKG_FROM_FILE, use pkg->origin_data.file
-	*/
-  union {
-		pmdb_t *db;
-		char *file;
-	} origin_data;
-	pmdbinfrq_t infolevel;
+
+	struct pkg_operations *ops;
 };
 
 pmpkg_t* _alpm_pkg_new(void);

lib/libalpm/pkghash.c

@@ -0,0 +1,331 @@
+/*
+ *  pkghash.c
+ *
+ *  Copyright (c) 2011 Pacman Development Team <pacman-dev@archlinux.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "pkghash.h"
+#include "util.h"
+#include "log.h"
+
+/* List of primes for possible sizes of hash tables.
+ *
+ * The maximum table size is the last prime under 1,000,000.  That is
+ * more than an order of magnitude greater than the number of packages
+ * in any Linux distribution.
+ */
+static const size_t prime_list[] =
+{
+	11ul, 13ul, 17ul, 19ul, 23ul, 29ul, 31ul, 37ul, 41ul, 43ul, 47ul,
+	53ul, 59ul, 61ul, 67ul, 71ul, 73ul, 79ul, 83ul, 89ul, 97ul, 103ul,
+	109ul, 113ul, 127ul, 137ul, 139ul, 149ul, 157ul, 167ul, 179ul, 193ul,
+	199ul, 211ul, 227ul, 241ul, 257ul, 277ul, 293ul, 313ul, 337ul, 359ul,
+	383ul, 409ul, 439ul, 467ul, 503ul, 541ul, 577ul, 619ul, 661ul, 709ul,
+	761ul, 823ul, 887ul, 953ul, 1031ul, 1109ul, 1193ul, 1289ul, 1381ul,
+	1493ul, 1613ul, 1741ul, 1879ul, 2029ul, 2179ul, 2357ul, 2549ul,
+	2753ul, 2971ul, 3209ul, 3469ul, 3739ul, 4027ul, 4349ul, 4703ul,
+	5087ul, 5503ul, 5953ul, 6427ul, 6949ul, 7517ul, 8123ul, 8783ul,
+	9497ul, 10273ul, 11113ul, 12011ul, 12983ul, 14033ul, 15173ul,
+	16411ul, 17749ul, 19183ul, 20753ul, 22447ul, 24281ul, 26267ul,
+	28411ul, 30727ul, 33223ul, 35933ul, 38873ul, 42043ul, 45481ul,
+	49201ul, 53201ul, 57557ul, 62233ul, 67307ul, 72817ul, 78779ul,
+	85229ul, 92203ul, 99733ul, 107897ul, 116731ul, 126271ul, 136607ul,
+	147793ul, 159871ul, 172933ul, 187091ul, 202409ul, 218971ul, 236897ul,
+	256279ul, 277261ul, 299951ul, 324503ul, 351061ul, 379787ul, 410857ul,
+	444487ul, 480881ul, 520241ul, 562841ul, 608903ul, 658753ul, 712697ul,
+	771049ul, 834181ul, 902483ul, 976369ul
+};
+
+/* Allocate a hash table with at least "size" buckets */
+pmpkghash_t *_alpm_pkghash_create(size_t size)
+{
+	pmpkghash_t *hash = NULL;
+	size_t i, loopsize;
+
+	MALLOC(hash, sizeof(pmpkghash_t), RET_ERR(PM_ERR_MEMORY, NULL));
+
+	hash->list = NULL;
+	hash->entries = 0;
+	hash->buckets = 0;
+
+	loopsize = sizeof(prime_list) / sizeof(*prime_list);
+	for(i = 0; i < loopsize; i++) {
+		if(prime_list[i] > size) {
+			hash->buckets = prime_list[i];
+			break;
+		}
+	}
+
+	if(hash->buckets < size) {
+		_alpm_log(PM_LOG_ERROR, _("database larger than maximum size\n"));
+		free(hash);
+		return(NULL);
+	}
+
+	CALLOC(hash->hash_table, hash->buckets, sizeof(alpm_list_t*), \
+				free(hash); RET_ERR(PM_ERR_MEMORY, NULL));
+
+	return(hash);
+}
+
+static size_t get_hash_position(unsigned long name_hash, pmpkghash_t *hash)
+{
+	size_t position;
+	alpm_list_t *ptr;
+
+	position = name_hash % hash->buckets;
+
+	/* collision resolution using open addressing with linear probing */
+	while((ptr = hash->hash_table[position]) != NULL) {
+		position = (position + 1) % hash->buckets;
+	}
+
+	return(position);
+}
+
+/* Expand the hash table size to the next increment and rebin the entries */
+static pmpkghash_t *rehash(pmpkghash_t *oldhash)
+{
+	pmpkghash_t *newhash;
+	size_t newsize, position, i;
+
+	/* Hash tables will need resized in two cases:
+	 *  - adding packages to the local database
+	 *  - poor estimation of the number of packages in sync database
+	 *
+	 * For small hash tables sizes (<500) the increase in size is by a
+	 * minimum of a factor of 2 for optimal rehash efficiency.  For
+	 * larger database sizes, this increase is reduced to avoid excess
+	 * memory allocation as both scenarios requiring a rehash should not
+	 * require a table size increase that large. */
+	if(oldhash->buckets < 500) {
+		newsize = oldhash->buckets * 2;
+	} else if(oldhash->buckets < 2000) {
+		newsize = oldhash->buckets * 3 / 2;
+	} else if(oldhash->buckets < 5000) {
+		newsize = oldhash->buckets * 4 / 3;
+	} else {
+		newsize = oldhash->buckets + 1;
+	}
+
+	newhash = _alpm_pkghash_create(newsize);
+	if(newhash == NULL) {
+		/* creation of newhash failed, stick with old one... */
+		return(oldhash);
+	}
+
+	newhash->list = oldhash->list;
+	oldhash->list = NULL;
+
+	for(i = 0; i < oldhash->buckets; i++) {
+		if(oldhash->hash_table[i] != NULL) {
+			pmpkg_t *package = oldhash->hash_table[i]->data;
+
+			position = get_hash_position(package->name_hash, newhash);
+
+			newhash->hash_table[position] = oldhash->hash_table[i];
+			oldhash->hash_table[i] = NULL;
+		}
+	}
+
+	newhash->entries = oldhash->entries;
+
+	_alpm_pkghash_free(oldhash);
+
+	return(newhash);
+}
+
+static pmpkghash_t *pkghash_add_pkg(pmpkghash_t *hash, pmpkg_t *pkg, int sorted)
+{
+	alpm_list_t *ptr;
+	size_t position;
+
+	if(pkg == NULL || hash == NULL) {
+		return(hash);
+	}
+
+	if((hash->entries + 1) / MAX_HASH_LOAD > hash->buckets) {
+		hash = rehash(hash);
+	}
+
+	position = get_hash_position(pkg->name_hash, hash);
+
+	ptr = calloc(1, sizeof(alpm_list_t));
+	if(ptr == NULL) {
+		return(hash);
+	}
+
+	ptr->data = pkg;
+	ptr->next = NULL;
+	ptr->prev = ptr;
+
+	hash->hash_table[position] = ptr;
+	if(!sorted){
+		hash->list = alpm_list_join(hash->list, ptr);
+	}else{
+		hash->list = alpm_list_mmerge(hash->list, ptr, _alpm_pkg_cmp);
+	}
+
+	hash->entries += 1;
+	return(hash);
+}
+
+pmpkghash_t *_alpm_pkghash_add(pmpkghash_t *hash, pmpkg_t *pkg)
+{
+	return(pkghash_add_pkg(hash, pkg, 0));
+}
+
+pmpkghash_t *_alpm_pkghash_add_sorted(pmpkghash_t *hash, pmpkg_t *pkg)
+{
+	return(pkghash_add_pkg(hash, pkg, 1));
+}
+
+static size_t move_one_entry(pmpkghash_t *hash, size_t start, size_t end)
+{
+	/* Iterate backwards from 'end' to 'start', seeing if any of the items
+	 * would hash to 'start'. If we find one, we move it there and break.  If
+	 * we get all the way back to position and find none that hash to it, we
+	 * also end iteration. Iterating backwards helps prevent needless shuffles;
+	 * we will never need to move more than one item per function call.  The
+	 * return value is our current iteration location; if this is equal to
+	 * 'start' we can stop this madness. */
+	while(end != start) {
+		alpm_list_t *i = hash->hash_table[end];
+		pmpkg_t *info = i->data;
+		size_t new_position = get_hash_position(info->name_hash, hash);
+
+		if(new_position == start) {
+			hash->hash_table[start] = i;
+			hash->hash_table[end] = NULL;
+			break;
+		}
+
+		/* the odd math ensures we are always positive, e.g.
+		 * e.g. (0 - 1) % 47      == -1
+		 * e.g. (47 + 0 - 1) % 47 == 46 */
+		end = (hash->buckets + end - 1) % hash->buckets;
+	}
+	return(end);
+}
+
+/**
+ * @brief Remove a package from a pkghash.
+ *
+ * @param hash     the hash to remove the package from
+ * @param pkg      the package we are removing
+ * @param data     output parameter containing the removed item
+ *
+ * @return the resultant hash
+ */
+pmpkghash_t *_alpm_pkghash_remove(pmpkghash_t *hash, pmpkg_t *pkg,
+		pmpkg_t **data)
+{
+	alpm_list_t *i;
+	size_t position;
+
+	if(data) {
+		*data = NULL;
+	}
+
+	if(pkg == NULL || hash == NULL) {
+		return(hash);
+	}
+
+	position = pkg->name_hash % hash->buckets;
+	while((i = hash->hash_table[position]) != NULL) {
+		pmpkg_t *info = i->data;
+
+		if(info->name_hash == pkg->name_hash &&
+					strcmp(info->name, pkg->name) == 0) {
+			size_t stop, prev;
+
+			/* remove from list and hash */
+			hash->list = alpm_list_remove_item(hash->list, i);
+			if(data) {
+				*data = info;
+			}
+			hash->hash_table[position] = NULL;
+			free(i);
+			hash->entries -= 1;
+
+			/* Potentially move entries following removed entry to keep open
+			 * addressing collision resolution working. We start by finding the
+			 * next null bucket to know how far we have to look. */
+			stop = (position + 1) % hash->buckets;
+			while(hash->hash_table[stop] != NULL && stop != position) {
+				stop = (stop + 1) % hash->buckets;
+			}
+			stop = (hash->buckets + stop - 1) % hash->buckets;
+
+			/* We now search backwards from stop to position. If we find an
+			 * item that now hashes to position, we will move it, and then try
+			 * to plug the new hole we just opened up, until we finally don't
+			 * move anything. */
+			while((prev = move_one_entry(hash, position, stop)) != position) {
+				position = prev;
+			}
+
+			return(hash);
+		}
+
+		position = (position + 1) % hash->buckets;
+	}
+
+	return(hash);
+}
+
+void _alpm_pkghash_free(pmpkghash_t *hash)
+{
+	size_t i;
+	if(hash != NULL) {
+		for(i = 0; i < hash->buckets; i++) {
+			free(hash->hash_table[i]);
+		}
+		free(hash->hash_table);
+	}
+	free(hash);
+}
+
+pmpkg_t *_alpm_pkghash_find(pmpkghash_t *hash, const char *name)
+{
+	alpm_list_t *lp;
+	unsigned long name_hash;
+	size_t position;
+
+	ALPM_LOG_FUNC;
+
+	if(name == NULL || hash == NULL) {
+		return(NULL);
+	}
+
+	name_hash = _alpm_hash_sdbm(name);
+
+	position = name_hash % hash->buckets;
+
+	while((lp = hash->hash_table[position]) != NULL) {
+		pmpkg_t *info = lp->data;
+
+		if(info->name_hash == name_hash && strcmp(info->name, name) == 0) {
+			return(info);
+		}
+
+		position = (position + 1) % hash->buckets;
+	}
+
+	return(NULL);
+}
+
+/* vim: set ts=2 sw=2 noet: */

lib/libalpm/pkghash.h

@@ -0,0 +1,60 @@
+/*
+ *  pkghash.h
+ *
+ *  Copyright (c) 2011 Pacman Development Team <pacman-dev@archlinux.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _ALPM_PKGHASH_H
+#define _ALPM_PKGHASH_H
+
+#include <stdlib.h>
+
+#include "alpm.h"
+#include "alpm_list.h"
+
+
+/**
+ * @brief A hash table for holding pmpkg_t objects.
+ *
+ * A combination of a hash table and a list, allowing for fast look-up
+ * by package name but also iteration over the packages.
+ */
+struct __pmpkghash_t {
+	/** data held by the hash table */
+	alpm_list_t **hash_table;
+	/** number of buckets in hash table */
+	size_t buckets;
+	/** number of entries in hash table */
+	size_t entries;
+	/** head node of the hash table data in normal list format */
+	alpm_list_t *list;
+};
+
+typedef struct __pmpkghash_t pmpkghash_t;
+
+pmpkghash_t *_alpm_pkghash_create(size_t size);
+
+pmpkghash_t *_alpm_pkghash_add(pmpkghash_t *hash, pmpkg_t *pkg);
+pmpkghash_t *_alpm_pkghash_add_sorted(pmpkghash_t *hash, pmpkg_t *pkg);
+pmpkghash_t *_alpm_pkghash_remove(pmpkghash_t *hash, pmpkg_t *pkg, pmpkg_t **data);
+
+void _alpm_pkghash_free(pmpkghash_t *hash);
+
+pmpkg_t *_alpm_pkghash_find(pmpkghash_t *hash, const char *name);
+
+#define MAX_HASH_LOAD 0.7
+
+#endif /* _ALPM_PKGHASH_H */

lib/libalpm/po/LINGUAS

@@ -1,16 +1,25 @@
 # Set of available languages.
+ca
 cs
+da
 de
+el
 en_GB
 es
+fi
 fr
 hu
 it
 kk
+ko
+nb
 pl
+pt
 pt_BR
 ro
 ru
+sk
+sv
 tr
 uk
 zh_CN

lib/libalpm/po/Makefile.in.in

@@ -1,5 +1,5 @@
 # Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-1997, 2000-2003 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
+# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
 #
 # This file can be copied and used freely without restrictions.  It can
 # be used in projects which are not available under the GNU General Public
@@ -8,10 +8,12 @@
 # Please note that the actual code of GNU gettext is covered by the GNU
 # General Public License and is *not* in the public domain.
 #
-# Origin: gettext-0.13
+# Origin: gettext-0.18
+GETTEXT_MACRO_VERSION = 0.18
 
 PACKAGE = @PACKAGE@
 VERSION = @VERSION@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 
 SHELL = /bin/sh
 @SET_MAKE@
@@ -22,18 +24,38 @@ VPATH = @srcdir@
 
 prefix = @prefix@
 exec_prefix = @exec_prefix@
-datadir = @datadir@
 datarootdir = @datarootdir@
-localedir = $(datadir)/locale
+datadir = @datadir@
+localedir = @localedir@
 gettextsrcdir = $(datadir)/gettext/po
 
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
-mkinstalldirs = @INSTALL@ -d
 
-GMSGFMT = @GMSGFMT@
-MSGFMT = @MSGFMT@
-XGETTEXT = @XGETTEXT@
+# We use $(mkdir_p).
+# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
+# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
+# @install_sh@ does not start with $(SHELL), so we add it.
+# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
+# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
+# versions, $(mkinstalldirs) and $(install_sh) are unused.
+mkinstalldirs = $(SHELL) @install_sh@ -d
+install_sh = $(SHELL) @install_sh@
+MKDIR_P = @MKDIR_P@
+mkdir_p = @mkdir_p@
+
+GMSGFMT_ = @GMSGFMT@
+GMSGFMT_no = @GMSGFMT@
+GMSGFMT_yes = @GMSGFMT_015@
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+MSGFMT_ = @MSGFMT@
+MSGFMT_no = @MSGFMT@
+MSGFMT_yes = @MSGFMT_015@
+MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = @XGETTEXT@
+XGETTEXT_no = @XGETTEXT@
+XGETTEXT_yes = @XGETTEXT_015@
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
 MSGMERGE = msgmerge
 MSGMERGE_UPDATE = @MSGMERGE@ --update
 MSGINIT = msginit
@@ -46,7 +68,7 @@ UPDATEPOFILES = @UPDATEPOFILES@
 DUMMYPOFILES = @DUMMYPOFILES@
 DISTFILES.common = Makefile.in.in remove-potcdate.sin \
 $(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
-DISTFILES = $(DISTFILES.common) Makevars POTFILES.in $(DOMAIN).pot stamp-po \
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
 $(POFILES) $(GMOFILES) \
 $(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
 
@@ -57,7 +79,7 @@ CATALOGS = @CATALOGS@
 # Makevars gets inserted here. (Don't remove this line!)
 
 .SUFFIXES:
-.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update
+.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
 
 .po.mo:
 	@echo "$(MSGFMT) -c -o $@ $<"; \
@@ -66,19 +88,32 @@ CATALOGS = @CATALOGS@
 .po.gmo:
 	@lang=`echo $* | sed -e 's,.*/,,'`; \
 	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
-	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
+	echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \
+	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
 
 .sin.sed:
 	sed -e '/^#/d' $< > t-$@
 	mv t-$@ $@
 
 
-all: all-@USE_NLS@
+all: check-macro-version all-@USE_NLS@
 
 all-yes: stamp-po
 all-no:
 
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+check-macro-version:
+	@test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
+	  || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
+	       exit 1; \
+	     }
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, stamp-po is a nop (i.e. a phony target).
+
 # stamp-po is a timestamp denoting the last time at which the CATALOGS have
 # been loosely updated. Its purpose is that when a developer or translator
 # checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
@@ -88,10 +123,13 @@ all-no:
 # $(POFILES) has been designed to not touch files that don't need to be
 # changed.
 stamp-po: $(srcdir)/$(DOMAIN).pot
-	test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
-	@echo "touch stamp-po"
-	@echo timestamp > stamp-poT
-	@mv stamp-poT stamp-po
+	test ! -f $(srcdir)/$(DOMAIN).pot || \
+	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+	@test ! -f $(srcdir)/$(DOMAIN).pot || { \
+	  echo "touch stamp-po" && \
+	  echo timestamp > stamp-poT && \
+	  mv stamp-poT stamp-po; \
+	}
 
 # Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
 # otherwise packages like GCC can not be built if only parts of the source
@@ -100,11 +138,34 @@ stamp-po: $(srcdir)/$(DOMAIN).pot
 # This target rebuilds $(DOMAIN).pot; it is an expensive operation.
 # Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
 $(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
-	$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
-	  --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
-	  --files-from=$(srcdir)/POTFILES.in \
-	  --copyright-holder='$(COPYRIGHT_HOLDER)' \
-	  --msgid-bugs-address='$(MSGID_BUGS_ADDRESS)'
+	if LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null | grep -v 'libtool:' >/dev/null; then \
+	  package_gnu='GNU '; \
+	else \
+	  package_gnu=''; \
+	fi; \
+	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+	else \
+	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+	fi; \
+	case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	  '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	    ;; \
+	  *) \
+	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+	      --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+	      --files-from=$(srcdir)/POTFILES.in \
+	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
+	      --package-name="$${package_gnu}@PACKAGE@" \
+	      --package-version='@VERSION@' \
+	      --msgid-bugs-address="$$msgid_bugs_address" \
+	    ;; \
+	esac
 	test ! -f $(DOMAIN).po || { \
 	  if test -f $(srcdir)/$(DOMAIN).pot; then \
 	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
@@ -130,16 +191,27 @@ $(srcdir)/$(DOMAIN).pot:
 # Note that a PO file is not touched if it doesn't need to be changed.
 $(POFILES): $(srcdir)/$(DOMAIN).pot
 	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
-	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
-	cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot
+	if test -f "$(srcdir)/$${lang}.po"; then \
+	  test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+	  echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \
+	  cd $(srcdir) \
+	    && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	           '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
+	           *) \
+	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \
+	         esac; \
+	       }; \
+	else \
+	  $(MAKE) $${lang}.po-create; \
+	fi
 
 
 install: install-exec install-data
 install-exec:
 install-data: install-data-@USE_NLS@
 	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
 	  for file in $(DISTFILES.common) Makevars.template; do \
 	    $(INSTALL_DATA) $(srcdir)/$$file \
 			    $(DESTDIR)$(gettextsrcdir)/$$file; \
@@ -152,13 +224,12 @@ install-data: install-data-@USE_NLS@
 	fi
 install-data-no: all
 install-data-yes: all
-	$(mkinstalldirs) $(DESTDIR)$(datadir)
 	@catalogs='$(CATALOGS)'; \
 	for cat in $$catalogs; do \
 	  cat=`basename $$cat`; \
 	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
 	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-	  $(mkinstalldirs) $(DESTDIR)$$dir; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
 	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
 	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
 	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
@@ -198,19 +269,18 @@ installdirs: installdirs-exec installdirs-data
 installdirs-exec:
 installdirs-data: installdirs-data-@USE_NLS@
 	if test "$(PACKAGE)" = "gettext-tools"; then \
-	  $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
 	else \
 	  : ; \
 	fi
 installdirs-data-no:
 installdirs-data-yes:
-	$(mkinstalldirs) $(DESTDIR)$(datadir)
 	@catalogs='$(CATALOGS)'; \
 	for cat in $$catalogs; do \
 	  cat=`basename $$cat`; \
 	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
 	  dir=$(localedir)/$$lang/LC_MESSAGES; \
-	  $(mkinstalldirs) $(DESTDIR)$$dir; \
+	  $(mkdir_p) $(DESTDIR)$$dir; \
 	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
 	    if test -n "$$lc"; then \
 	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
@@ -285,11 +355,14 @@ dist distdir:
 	$(MAKE) update-po
 	@$(MAKE) dist2
 # This is a separate target because 'update-po' must be executed before.
-dist2: $(DISTFILES)
+dist2: stamp-po $(DISTFILES)
 	dists="$(DISTFILES)"; \
 	if test "$(PACKAGE)" = "gettext-tools"; then \
 	  dists="$$dists Makevars.template"; \
 	fi; \
+	if test -f $(srcdir)/$(DOMAIN).pot; then \
+	  dists="$$dists $(DOMAIN).pot stamp-po"; \
+	fi; \
 	if test -f $(srcdir)/ChangeLog; then \
 	  dists="$$dists ChangeLog"; \
 	fi; \
@@ -301,9 +374,9 @@ dist2: $(DISTFILES)
 	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
 	for file in $$dists; do \
 	  if test -f $$file; then \
-	    cp -p $$file $(distdir); \
+	    cp -p $$file $(distdir) || exit 1; \
 	  else \
-	    cp -p $(srcdir)/$$file $(distdir); \
+	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \
 	  fi; \
 	done
 
@@ -312,6 +385,13 @@ update-po: Makefile
 	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
 	$(MAKE) update-gmo
 
+# General rule for creating PO files.
+
+.nop.po-create:
+	@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+	exit 1
+
 # General rule for updating PO files.
 
 .nop.po-update:
@@ -320,9 +400,15 @@ update-po: Makefile
 	tmpdir=`pwd`; \
 	echo "$$lang:"; \
 	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
-	echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+	echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
 	cd $(srcdir); \
-	if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
+	if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+	       '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	       *) \
+	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
+	     esac; \
+	   }; then \
 	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
 	    rm -f $$tmpdir/$$lang.new.po; \
 	  else \
@@ -343,10 +429,13 @@ $(DUMMYPOFILES):
 update-gmo: Makefile $(GMOFILES)
 	@:
 
-Makefile: Makefile.in.in $(top_builddir)/config.status @POMAKEFILEDEPS@
+# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
+# because execution permission bits may not work on the current file system.
+# Use @SHELL@, which is the shell determined by autoconf for the use by its
+# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
 	cd $(top_builddir) \
-	  && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
-	       $(SHELL) ./config.status
+	  && @SHELL@ ./config.status $(subdir)/$@.in po-directories
 
 force:
 

lib/libalpm/po/Makevars

@@ -10,7 +10,7 @@ top_builddir = ../../../
 # These options get passed to xgettext.
 XGETTEXT_OPTIONS = --no-location \
   --keyword=_ --flag=_:1:c-format \
-  --keyword=N_ --flag=N_:1:c-format
+  --keyword=_n:1,2 --flag=_n:1:c-format --flag=_n:2:c-format
 
 # This is the copyright holder that gets inserted into the header of the
 # $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
@@ -19,7 +19,7 @@ COPYRIGHT_HOLDER = Pacman Development Team <pacman-dev@archlinux.org>
 
 # This is the email address or URL to which the translators shall report
 # bugs in the untranslated strings.
-MSGID_BUGS_ADDRESS = pacman-dev@archlinux.org
+MSGID_BUGS_ADDRESS = http://bugs.archlinux.org/index.php?project=3
 
 # This is the list of locale categories, beyond LC_MESSAGES, for which the
 # message catalogs shall be used.  It is usually empty.

lib/libalpm/po/POTFILES.in

@@ -6,13 +6,14 @@ lib/libalpm/add.c
 lib/libalpm/alpm.c
 #lib/libalpm/alpm_list.c
 lib/libalpm/backup.c
-lib/libalpm/be_files.c
+lib/libalpm/be_local.c
 lib/libalpm/be_package.c
-lib/libalpm/cache.c
+lib/libalpm/be_sync.c
 lib/libalpm/conflict.c
 lib/libalpm/db.c
 lib/libalpm/delta.c
 lib/libalpm/deps.c
+lib/libalpm/diskspace.c
 lib/libalpm/dload.c
 lib/libalpm/error.c
 lib/libalpm/group.c
@@ -20,6 +21,7 @@ lib/libalpm/handle.c
 lib/libalpm/log.c
 #lib/libalpm/md5.c
 lib/libalpm/package.c
+lib/libalpm/pkghash.c
 lib/libalpm/remove.c
 lib/libalpm/sync.c
 lib/libalpm/trans.c

lib/libalpm/po/ca.po

@@ -0,0 +1,549 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Pacman Development Team <pacman-dev@archlinux.org>
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: Arch Linux Pacman package manager\n"
+"Report-Msgid-Bugs-To: http://bugs.archlinux.org/index.php?project=3\n"
+"POT-Creation-Date: 2011-03-14 13:51-0500\n"
+"PO-Revision-Date: 2011-03-04 18:24+0000\n"
+"Last-Translator: toofishes <dpmcgee@gmail.com>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: ca\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+
+#, c-format
+msgid "%s-%s is up to date -- skipping\n"
+msgstr "%s-%s és al dia -- s'ignorarà\n"
+
+#, c-format
+msgid "%s-%s is up to date -- reinstalling\n"
+msgstr "%s-%s és al dia -- es reinstal·larà\n"
+
+#, c-format
+msgid "downgrading package %s (%s => %s)\n"
+msgstr "desactualitzant paquet %s (%s => %s)\n"
+
+#, c-format
+msgid "warning given when extracting %s (%s)\n"
+msgstr ""
+
+#, c-format
+msgid "could not extract %s (%s)\n"
+msgstr "no es pot extreure %s (%s)\n"
+
+#, c-format
+msgid ""
+"directory permissions differ on %s\n"
+"filesystem: %o  package: %o\n"
+msgstr ""
+"els permisos del directori difereixen en %s\n"
+"sistema de fitxers: %o paquet: %o\n"
+
+#, c-format
+msgid "extract: not overwriting dir with file %s\n"
+msgstr "extracció: no se sobreescriurà el directori amb el fitxer %s\n"
+
+#, c-format
+msgid "extract: symlink %s does not point to dir\n"
+msgstr "extracció: l'enllaç simbòlic %s no apunta al directori\n"
+
+#, c-format
+msgid "could not rename %s to %s (%s)\n"
+msgstr "no es pot reanomenar %s a %s (%s)\n"
+
+#, c-format
+msgid "%s saved as %s\n"
+msgstr "%s desat com %s\n"
+
+#, c-format
+msgid "could not install %s as %s (%s)\n"
+msgstr "no es pot instal·lar %s com %s (%s)\n"
+
+#, c-format
+msgid "%s installed as %s\n"
+msgstr "%s instal·lat com %s\n"
+
+#, c-format
+msgid "extracting %s as %s.pacnew\n"
+msgstr "s'està extraient %s com %s.pacnew\n"
+
+#, c-format
+msgid "could not get current working directory\n"
+msgstr "no es pot obtenir el directori de treball actual\n"
+
+#, c-format
+msgid "could not change directory to %s (%s)\n"
+msgstr "no s'ha pogut canviar el directori a %s (%s)\n"
+
+#, c-format
+msgid "problem occurred while upgrading %s\n"
+msgstr "ha ocorregut un problema en actualitzar %s\n"
+
+#, c-format
+msgid "problem occurred while installing %s\n"
+msgstr "ha ocorregut un problema en instal·lar %s\n"
+
+#, c-format
+msgid "could not update database entry %s-%s\n"
+msgstr "no s'ha pogut actualitzar l'entrada de la base de dades %s-%s\n"
+
+#, c-format
+msgid "could not add entry '%s' in cache\n"
+msgstr "no s'ha pogut afegir l'entrada '%s' en la memòria cau\n"
+
+#, c-format
+msgid "removing invalid database: %s\n"
+msgstr "s'està eliminant la base de dades invàlida: %s\n"
+
+#, c-format
+msgid "invalid name for database entry '%s'\n"
+msgstr "nom invàlid per l'entrada de la base de dades '%s'\n"
+
+#, c-format
+msgid "duplicated database entry '%s'\n"
+msgstr "entrada de la base de dades duplicada '%s'\n"
+
+#, c-format
+msgid "corrupted database entry '%s'\n"
+msgstr "entrada de la base de dades corrupta '%s'\n"
+
+#, c-format
+msgid "could not open file %s: %s\n"
+msgstr "no es pot obrir el fitxer %s: %s\n"
+
+#, c-format
+msgid "%s database is inconsistent: name mismatch on package %s\n"
+msgstr "la base de dades %s és inconsistent: nom erroni en el paquet %s\n"
+
+#, c-format
+msgid "%s database is inconsistent: version mismatch on package %s\n"
+msgstr "la base de dades %s és inconsistent: versió errònia en el paquet %s\n"
+
+#, c-format
+msgid "could not create directory %s: %s\n"
+msgstr "no s'ha pogut crear el directori %s: %s\n"
+
+#, c-format
+msgid "could not parse package description file in %s\n"
+msgstr "no s'ha pogut analitzar el fitxers de descripció de paquet en %s\n"
+
+#, c-format
+msgid "missing package name in %s\n"
+msgstr "falta nom de paquet en %s\n"
+
+#, c-format
+msgid "missing package version in %s\n"
+msgstr "falta versió de paquet en %s\n"
+
+#, c-format
+msgid "error while reading package %s: %s\n"
+msgstr "error en llegir paquet %s: %s\n"
+
+#, c-format
+msgid "missing package metadata in %s\n"
+msgstr "falten les metadades del paquet en %s\n"
+
+#, c-format
+msgid "removing invalid file: %s\n"
+msgstr ""
+
+#, c-format
+msgid "database path is undefined\n"
+msgstr "no s'ha definit la ruta de la base de dades\n"
+
+#, c-format
+msgid "dependency cycle detected:\n"
+msgstr "s'ha detectat una dependència cíclica:\n"
+
+#, c-format
+msgid "%s will be removed after its %s dependency\n"
+msgstr "%s serà eliminat després de la seva dependència %s\n"
+
+#, c-format
+msgid "%s will be installed before its %s dependency\n"
+msgstr "%s serà instal·lar abans de la seva dependència %s\n"
+
+#, c-format
+msgid "ignoring package %s-%s\n"
+msgstr "s'està ignorant paquet %s-%s\n"
+
+#, c-format
+msgid "cannot resolve \"%s\", a dependency of \"%s\"\n"
+msgstr "no es pot resoldre \"%s\", una dependència de \"%s\"\n"
+
+#, c-format
+msgid "could not get filesystem information\n"
+msgstr ""
+
+#, c-format
+msgid "could not get filesystem information for %s: %s\n"
+msgstr ""
+
+#, c-format
+msgid "could not determine mount point for file %s"
+msgstr ""
+
+#, c-format
+msgid "could not determine filesystem mount points"
+msgstr ""
+
+#, c-format
+msgid "Partition %s is mounted read only\n"
+msgstr ""
+
+#, c-format
+msgid "Partition %s too full: %ld blocks needed, %ld blocks free\n"
+msgstr ""
+
+#, c-format
+msgid "disk"
+msgstr "disc"
+
+#, c-format
+msgid "url '%s' is invalid\n"
+msgstr "l'url '%s' és invàlid\n"
+
+#, c-format
+msgid "failed retrieving file '%s' from %s : %s\n"
+msgstr "ha fallat en recuperar el fitxer '%s' des de %s : %s\n"
+
+#, c-format
+msgid "resuming download of %s not possible; starting over\n"
+msgstr "no es pot la reprendre la baixada de %s, s'està iniciant de nou\n"
+
+#, c-format
+msgid "error writing to file '%s': %s\n"
+msgstr "error en escriure al fitxer '%s': %s\n"
+
+#, c-format
+msgid "failed retrieving file '%s' from %s\n"
+msgstr "ha fallat en recuperar el fitxer '%s' de %s\n"
+
+#, c-format
+msgid "%s appears to be truncated: %jd/%jd bytes\n"
+msgstr "%s sembla estar truncat: %jd/%jd bytes\n"
+
+#, c-format
+msgid "failed to download %s\n"
+msgstr "ha fallat en baixar %s\n"
+
+#, c-format
+msgid "out of memory!"
+msgstr "memòria esgotada!"
+
+#, c-format
+msgid "unexpected system error"
+msgstr "error inesperat del sistema"
+
+#, c-format
+msgid "insufficient privileges"
+msgstr "privilegis insuficients"
+
+#, c-format
+msgid "could not find or read file"
+msgstr "no es pot trobar o llegir fitxer"
+
+#, c-format
+msgid "could not find or read directory"
+msgstr "no es pot trobar o llegir directori"
+
+#, c-format
+msgid "wrong or NULL argument passed"
+msgstr "s'ha passat un argument erroni o NULL"
+
+#, c-format
+msgid "not enough free disk space"
+msgstr ""
+
+#, c-format
+msgid "library not initialized"
+msgstr "llibreria no inicialitzada"
+
+#, c-format
+msgid "library already initialized"
+msgstr "la llibreria ja s'ha inicialitzat"
+
+#, c-format
+msgid "unable to lock database"
+msgstr "no s'ha pogut bloquejar la base de dades"
+
+#, c-format
+msgid "could not open database"
+msgstr "no s'ha pogut obrir la base de dades"
+
+#, c-format
+msgid "could not create database"
+msgstr "no s'ha pogut crear la base de dades"
+
+#, c-format
+msgid "database not initialized"
+msgstr "base de dades no inicialitzada"
+
+#, c-format
+msgid "database already registered"
+msgstr "la base de dades ja s'ha registrat"
+
+#, c-format
+msgid "could not find database"
+msgstr "no s'ha pogut trobar la base de dades"
+
+#, c-format
+msgid "database is incorrect version"
+msgstr ""
+
+#, c-format
+msgid "could not update database"
+msgstr "no s'ha pogut actualitzar la base de dades"
+
+#, c-format
+msgid "could not remove database entry"
+msgstr "no s'ha pogut suprimir l'entrada de la base de dades"
+
+#, c-format
+msgid "invalid url for server"
+msgstr "url del servidor invàlid"
+
+#, c-format
+msgid "no servers configured for repository"
+msgstr "no s'ha configurat cap servidor pel repositori"
+
+#, c-format
+msgid "transaction already initialized"
+msgstr "ja s'ha inicialitzat la transacció"
+
+#, c-format
+msgid "transaction not initialized"
+msgstr "no s'ha inicialitzat la transacció"
+
+#, c-format
+msgid "duplicate target"
+msgstr "objectiu duplicat"
+
+#, c-format
+msgid "transaction not prepared"
+msgstr "transacció no preparada"
+
+#, c-format
+msgid "transaction aborted"
+msgstr "transacció cancel·lada"
+
+#, c-format
+msgid "operation not compatible with the transaction type"
+msgstr "l'operació no és compatible amb el tipus de transacció"
+
+#, c-format
+msgid "transaction commit attempt when database is not locked"
+msgstr ""
+"intent de publicació de la transacció amb la base de dades no bloquejada"
+
+#, c-format
+msgid "could not find or read package"
+msgstr "no s'ha pogut trobar o llegir el paquet"
+
+#, c-format
+msgid "operation cancelled due to ignorepkg"
+msgstr "operació cancel·lada degut a ignorepkg"
+
+#, c-format
+msgid "invalid or corrupted package"
+msgstr "paquet invàlid o corrupte"
+
+#, c-format
+msgid "cannot open package file"
+msgstr "no s'ha pogut obrir el fitxer de paquet"
+
+#, c-format
+msgid "cannot remove all files for package"
+msgstr "no s'han pogut eliminar tots els fitxers del paquet"
+
+#, c-format
+msgid "package filename is not valid"
+msgstr "el nom de fitxer del paquet no és vàlid"
+
+#, c-format
+msgid "package architecture is not valid"
+msgstr "l'arquitectura del paquet no és vàlida"
+
+#, c-format
+msgid "could not find repository for target"
+msgstr "no s'ha pogut trobar el repositori per l'objectiu"
+
+#, c-format
+msgid "invalid or corrupted delta"
+msgstr "delta invàlid o corrupte"
+
+#, c-format
+msgid "delta patch failed"
+msgstr "ha fallat el pedaç delta"
+
+#, c-format
+msgid "could not satisfy dependencies"
+msgstr "no s'han pogut satisfer les dependències"
+
+#, c-format
+msgid "conflicting dependencies"
+msgstr "dependències conflictives"
+
+#, c-format
+msgid "conflicting files"
+msgstr "fitxers conflictius"
+
+#, c-format
+msgid "failed to retrieve some files"
+msgstr "ha fallat en recuperar alguns fitxers"
+
+#, c-format
+msgid "failed to copy some file"
+msgstr ""
+
+#, c-format
+msgid "invalid regular expression"
+msgstr "expressió regular invàlida"
+
+#, c-format
+msgid "libarchive error"
+msgstr "error de libarchive"
+
+#, c-format
+msgid "download library error"
+msgstr "error de la llibreria de baixades"
+
+#, c-format
+msgid "error invoking external downloader"
+msgstr "error en invocar el baixador extern"
+
+#, c-format
+msgid "unexpected error"
+msgstr "error inesperat"
+
+#, c-format
+msgid "database larger than maximum size\n"
+msgstr ""
+
+#, c-format
+msgid "could not find %s in database -- skipping\n"
+msgstr "no s'ha pogut trobar %s en la base de dades -- s'està ometent\n"
+
+#, c-format
+msgid "removing %s from target list\n"
+msgstr "s'està eliminant %s de la llista d'objectius\n"
+
+#, c-format
+msgid "cannot remove file '%s': %s\n"
+msgstr "no s'ha pogut eliminar el fitxer '%s': %s\n"
+
+#, c-format
+msgid "could not remove database entry %s-%s\n"
+msgstr "no s'ha pogut eliminar la entrada de la base de dades %s-%s\n"
+
+#, c-format
+msgid "could not remove entry '%s' from cache\n"
+msgstr "no s'ha pogut eliminar l'entrada '%s' de la memòria cau\n"
+
+#, c-format
+msgid "%s: ignoring package upgrade (%s => %s)\n"
+msgstr "%s: s'ha ignorat l'actualització del paquet (%s => %s)\n"
+
+#, c-format
+msgid "%s: ignoring package downgrade (%s => %s)\n"
+msgstr "%s: s'ha ignorat la desactualització del paquet (%s => %s)\n"
+
+#, c-format
+msgid "%s: downgrading from version %s to version %s\n"
+msgstr "%s: desactualitzant de la versió %s a la versió %s\n"
+
+#, c-format
+msgid "%s: local (%s) is newer than %s (%s)\n"
+msgstr "%s: local (%s) és més nou que %s (%s)\n"
+
+#, c-format
+msgid "ignoring package replacement (%s-%s => %s-%s)\n"
+msgstr "s'està ignorant el reemplaçament del paquet (%s-%s => %s-%s)\n"
+
+#, c-format
+msgid "cannot replace %s by %s\n"
+msgstr "no s'ha pogut reemplaçar %s per %s\n"
+
+#, c-format
+msgid "unresolvable package conflicts detected\n"
+msgstr "s'ha detectat un paquet amb un conflicte impossible de resoldre\n"
+
+#, c-format
+msgid "removing '%s' from target list because it conflicts with '%s'\n"
+msgstr ""
+"s'està eliminant '%s' de la llista d'objectius perquè té conflictes amb "
+"'%s'\n"
+
+#, c-format
+msgid "failed to retrieve some files from %s\n"
+msgstr "ha fallat en recuperar alguns fitxers de %s\n"
+
+#, c-format
+msgid "could not commit removal transaction\n"
+msgstr "no s'ha pogut publicar la transacció d'eliminació\n"
+
+#, c-format
+msgid "could not commit transaction\n"
+msgstr "no s'ha pogut publicar la transacció\n"
+
+#, c-format
+msgid "%s database version is too old\n"
+msgstr ""
+
+#, c-format
+msgid "could not remove lock file %s\n"
+msgstr "no s'ha pogut eliminar el fitxer de bloqueig %s\n"
+
+#, c-format
+msgid "could not create temp directory\n"
+msgstr "no s'ha pogut crear el directori temporal\n"
+
+#, c-format
+msgid "could not copy tempfile to %s (%s)\n"
+msgstr "no s'ha pogut copiar el fitxer temporal a %s (%s)\n"
+
+#, c-format
+msgid "could not remove tmpdir %s\n"
+msgstr "no s'ha pogut eliminar el directori temporal %s\n"
+
+#, c-format
+msgid "could not create pipe (%s)\n"
+msgstr ""
+
+#, c-format
+msgid "could not fork a new process (%s)\n"
+msgstr "no s'ha pogut bifurcar a un nou procés (%s)\n"
+
+#, c-format
+msgid "could not change the root directory (%s)\n"
+msgstr "no s'ha pogut canviar el directori arrel (%s)\n"
+
+#, c-format
+msgid "call to execv failed (%s)\n"
+msgstr ""
+
+#, c-format
+msgid "call to waitpid failed (%s)\n"
+msgstr "ha fallat la crida a waitpid (%s)\n"
+
+#, c-format
+msgid "could not open pipe (%s)\n"
+msgstr ""
+
+#, c-format
+msgid "command failed to execute correctly\n"
+msgstr "l'ordre a fallat a executar-se correctament\n"
+
+#, c-format
+msgid "no %s cache exists, creating...\n"
+msgstr "no existeix memòria cau %s, s'està creant...\n"
+
+#, c-format
+msgid "couldn't create package cache, using /tmp instead\n"
+msgstr "no s'ha pogut crear la memòria cau del paquet, s'usarà /tmp\n"

lib/libalpm/po/cs.po

@@ -1,45 +1,41 @@
-# translation of cs.po to Čeština
-# Copyright (C) YEAR Judd Vinet <jvinet@zeroflux.org>
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Pacman Development Team <pacman-dev@archlinux.org>
 # This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
 #
-# Vojtěch Gondžala <vojtech.gondzala@gmail.com>, 2007, 2008, 2009.
 msgid ""
 msgstr ""
-"Project-Id-Version: cs\n"
-"Report-Msgid-Bugs-To: pacman-dev@archlinux.org\n"
-"POT-Creation-Date: 2009-07-27 21:15-0500\n"
-"PO-Revision-Date: 2009-07-29 14:14+0200\n"
-"Last-Translator: Vojtěch Gondžala <vojtech.gondzala@gmail.com>\n"
-"Language-Team: Czech <kde-i18n-doc@kde.org>\n"
+"Project-Id-Version: Arch Linux Pacman package manager\n"
+"Report-Msgid-Bugs-To: http://bugs.archlinux.org/index.php?project=3\n"
+"POT-Creation-Date: 2011-03-14 13:51-0500\n"
+"PO-Revision-Date: 2011-03-14 18:54+0000\n"
+"Last-Translator: toofishes <dpmcgee@gmail.com>\n"
+"Language-Team: Czech <None>\n"
+"Language: cs\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"X-Generator: Lokalize 1.0\n"
-"Plural-Forms:  nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
+"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2\n"
 
 #, c-format
-msgid "replacing older version %s-%s by %s in target list\n"
-msgstr "v seznamu cílů nahrazena starší verze %s-%s za %s\n"
+msgid "%s-%s is up to date -- skipping\n"
+msgstr "%s-%s je aktuální -- vynechat\n"
 
 #, c-format
-msgid "skipping %s-%s because newer version %s is in the target list\n"
-msgstr "vynechává se %s-%s, protože v seznamu cílů je novější veze %s\n"
+msgid "%s-%s is up to date -- reinstalling\n"
+msgstr "%s-%s je aktuální -- přeinstalovat\n"
 
 #, c-format
-msgid "conflicting packages were found in the target list\n"
-msgstr "v seznamu cílů byly nalezeny konfliktní balíčky\n"
+msgid "downgrading package %s (%s => %s)\n"
+msgstr "snížení verze balíčku %s (%s => %s)\n"
 
 #, c-format
-msgid "you cannot install two conflicting packages at the same time\n"
-msgstr "nelze instalovat dva konfliktní balíčky současně\n"
+msgid "warning given when extracting %s (%s)\n"
+msgstr "varování při rozbalování %s (%s)\n"
 
 #, c-format
-msgid "replacing packages with -U is not supported yet\n"
-msgstr "nahrazování balíčků pomocí -U není nyní podporováno\n"
-
-#, c-format
-msgid "you can replace packages manually using -Rd and -U\n"
-msgstr "balíčky lze nahradit ručně použitím -Rd a -U\n"
+msgid "could not extract %s (%s)\n"
+msgstr "nelze rozbalit %s (%s)\n"
 
 #, c-format
 msgid ""
@@ -47,7 +43,7 @@ msgid ""
 "filesystem: %o  package: %o\n"
 msgstr ""
 "přístupová práva adresáře %s se neshodují\n"
-"souborový systém: %o  balíček: %o\n"
+"souborový systém: %o   balíček: %o\n"
 
 #, c-format
 msgid "extract: not overwriting dir with file %s\n"
@@ -57,10 +53,6 @@ msgstr "rozbalení: adresář nebyl přepsán souborem %s\n"
 msgid "extract: symlink %s does not point to dir\n"
 msgstr "rozbalení: symbolický odkaz %s neodkazuje na adresář\n"
 
-#, c-format
-msgid "could not extract %s (%s)\n"
-msgstr "nelze rozbalit %s (%s)\n"
-
 #, c-format
 msgid "could not rename %s to %s (%s)\n"
 msgstr "nelze přejmenovat %s na %s (%s)\n"
@@ -85,6 +77,10 @@ msgstr "%s byl rozbalen jako %s.pacnew\n"
 msgid "could not get current working directory\n"
 msgstr "nelze určit aktuální pracovní adresář\n"
 
+#, c-format
+msgid "could not change directory to %s (%s)\n"
+msgstr "nelze změnit adresář na %s (%s)\n"
+
 #, c-format
 msgid "problem occurred while upgrading %s\n"
 msgstr "nastal problém při aktualizaci %s\n"
@@ -99,16 +95,20 @@ msgstr "nelze aktualizovat záznam databáze %s-%s\n"
 
 #, c-format
 msgid "could not add entry '%s' in cache\n"
-msgstr "nelze přidat položku '%s' do cache\n"
+msgstr "nelze přidat položku '%s' do mezipaměti\n"
 
 #, c-format
-msgid "could not remove database %s\n"
-msgstr "nelze odstranit záznam v databázi %s\n"
+msgid "removing invalid database: %s\n"
+msgstr "odstraňuje se chybná databáze: %s\n"
 
 #, c-format
 msgid "invalid name for database entry '%s'\n"
 msgstr "chybný název záznamu v databázi '%s'\n"
 
+#, c-format
+msgid "duplicated database entry '%s'\n"
+msgstr "duplicitní záznam v databázi '%s'\n"
+
 #, c-format
 msgid "corrupted database entry '%s'\n"
 msgstr "poškozený záznam v databázi '%s'\n"
@@ -150,8 +150,8 @@ msgid "missing package metadata in %s\n"
 msgstr "chybí metadata balíčku v %s\n"
 
 #, c-format
-msgid "attempt to re-register the 'local' DB\n"
-msgstr "pokus o opětovné zaregistrování databáze 'local'\n"
+msgid "removing invalid file: %s\n"
+msgstr "odstraněn neplatný soubor: %s\n"
 
 #, c-format
 msgid "database path is undefined\n"
@@ -173,42 +173,59 @@ msgstr "%s bude nainstalován před %s, na kterém závisí\n"
 msgid "ignoring package %s-%s\n"
 msgstr "ignoruje se balíček %s-%s\n"
 
-#, c-format
-msgid "provider package was selected (%s provides %s)\n"
-msgstr "byl vybrán nahrazující balíček (%s poskytuje %s)\n"
-
 #, c-format
 msgid "cannot resolve \"%s\", a dependency of \"%s\"\n"
 msgstr "nelze vyřešit \"%s\", závislost \"%s\"\n"
 
 #, c-format
-msgid "url '%s' is invalid\n"
-msgstr "URL '%s' je chybná\n"
+msgid "could not get filesystem information\n"
+msgstr "nepodařilo se získat informace o souborovém systému\n"
 
 #, c-format
-msgid "url scheme not specified, assuming HTTP\n"
-msgstr "schéma URL nedefinováno, předpokládá se HTTP\n"
+msgid "could not get filesystem information for %s: %s\n"
+msgstr "nepodařilo se získat informace o souborovém systému %s: %s\n"
+
+#, c-format
+msgid "could not determine mount point for file %s"
+msgstr "nepodařilo se určit připojovací bod pro soubor %s"
+
+#, c-format
+msgid "could not determine filesystem mount points"
+msgstr "nepodařilo se určit připojovací body pro souborové systémy"
+
+#, c-format
+msgid "Partition %s is mounted read only\n"
+msgstr "Diskový oddíl %s je připojen jen pro čtení\n"
+
+#, c-format
+msgid "Partition %s too full: %ld blocks needed, %ld blocks free\n"
+msgstr ""
+"Diskový oddíl %s je příliš plný: je potřeba %ld bloků, %ld bloků je volných\n"
 
 #, c-format
 msgid "disk"
 msgstr "disk"
 
+#, c-format
+msgid "url '%s' is invalid\n"
+msgstr "URL '%s' je chybná\n"
+
 #, c-format
 msgid "failed retrieving file '%s' from %s : %s\n"
 msgstr "selhalo získání souboru '%s' z %s: %s\n"
 
 #, c-format
-msgid "cannot resume download, starting over\n"
-msgstr "nelze navázat stahování, začíná se znovu\n"
-
-#, c-format
-msgid "cannot write to file '%s'\n"
-msgstr "nelze zapisovat do souboru '%s'\n"
+msgid "resuming download of %s not possible; starting over\n"
+msgstr "nelze navázat stahování %s, začíná se znovu\n"
 
 #, c-format
 msgid "error writing to file '%s': %s\n"
 msgstr "chyba při zápisu do souboru '%s': %s\n"
 
+#, c-format
+msgid "failed retrieving file '%s' from %s\n"
+msgstr "selhalo získání souboru '%s' z %s\n"
+
 #, c-format
 msgid "%s appears to be truncated: %jd/%jd bytes\n"
 msgstr "%s se zdá být zkrácen:  %jd/%jd bytů\n"
@@ -241,6 +258,10 @@ msgstr "nelze nalézt nebo číst adresář"
 msgid "wrong or NULL argument passed"
 msgstr "předán chybný nebo NULL argument"
 
+#, c-format
+msgid "not enough free disk space"
+msgstr "není dostatek volného místa na disku"
+
 #, c-format
 msgid "library not initialized"
 msgstr "knihovna nebyla inicializována"
@@ -273,6 +294,10 @@ msgstr "databáze zaregistrována"
 msgid "could not find database"
 msgstr "nelze nalézt databázi"
 
+#, c-format
+msgid "database is incorrect version"
+msgstr "databáze má nesprávnou verzi"
+
 #, c-format
 msgid "could not update database"
 msgstr "nelze aktualizovat databázi"
@@ -342,8 +367,12 @@ msgid "package filename is not valid"
 msgstr "jméno souboru balíčku není platné"
 
 #, c-format
-msgid "no such repository"
-msgstr "takový repositář není nastaven"
+msgid "package architecture is not valid"
+msgstr "architektura balíčku není platná"
+
+#, c-format
+msgid "could not find repository for target"
+msgstr "nelze nalézt repositář cíle"
 
 #, c-format
 msgid "invalid or corrupted delta"
@@ -369,6 +398,10 @@ msgstr "konfliktní soubory"
 msgid "failed to retrieve some files"
 msgstr "selhalo získání některých souborů"
 
+#, c-format
+msgid "failed to copy some file"
+msgstr "selhalo kopírování souboru"
+
 #, c-format
 msgid "invalid regular expression"
 msgstr "nesprávný regulární výraz"
@@ -389,10 +422,18 @@ msgstr "chyba volání externího programu pro stahování souborů"
 msgid "unexpected error"
 msgstr "neočekávaná chyba"
 
+#, c-format
+msgid "database larger than maximum size\n"
+msgstr "databáze je větší než maximální přípustná velikost\n"
+
 #, c-format
 msgid "could not find %s in database -- skipping\n"
 msgstr "nelze nalézt %s v databázi -- vynechat\n"
 
+#, c-format
+msgid "removing %s from target list\n"
+msgstr "'%s' odstraněn ze seznamu cílů\n"
+
 #, c-format
 msgid "cannot remove file '%s': %s\n"
 msgstr "nelze odstranit soubor '%s': %s\n"
@@ -403,7 +444,7 @@ msgstr "nelze odstranit záznam databáze %s-%s\n"
 
 #, c-format
 msgid "could not remove entry '%s' from cache\n"
-msgstr "nelze odstranit položku '%s' z cache\n"
+msgstr "nelze odstranit položku '%s' z mezipaměti\n"
 
 #, c-format
 msgid "%s: ignoring package upgrade (%s => %s)\n"
@@ -411,11 +452,11 @@ msgstr "%s: ignoruje se aktualizace balíčku (%s => %s)\n"
 
 #, c-format
 msgid "%s: ignoring package downgrade (%s => %s)\n"
-msgstr "%s: ignoruje se ponížení verze balíčku (%s => %s)\n"
+msgstr "%s: ignoruje se snížení verze balíčku (%s => %s)\n"
 
 #, c-format
 msgid "%s: downgrading from version %s to version %s\n"
-msgstr "%s: ponížení z verze %s na verzi %s\n"
+msgstr "%s: snížení z verze %s na verzi %s\n"
 
 #, c-format
 msgid "%s: local (%s) is newer than %s (%s)\n"
@@ -429,22 +470,6 @@ msgstr "ignoruje se náhrada balíčku (%s-%s => %s-%s)\n"
 msgid "cannot replace %s by %s\n"
 msgstr "nelze nahradit soubor %s souborem %s\n"
 
-#, c-format
-msgid "repository '%s' not found\n"
-msgstr "repositář '%s' nebyl nalezen\n"
-
-#, c-format
-msgid "%s-%s is up to date -- skipping\n"
-msgstr "%s-%s je aktuální -- vynechat\n"
-
-#, c-format
-msgid "%s-%s is up to date -- reinstalling\n"
-msgstr "%s-%s je aktuální -- přeinstalovat\n"
-
-#, c-format
-msgid "downgrading package %s (%s => %s)\n"
-msgstr "ponížení verze balíčku %s (%s => %s)\n"
-
 #, c-format
 msgid "unresolvable package conflicts detected\n"
 msgstr "zjištěn konflikt nerozlišitelných balíčků\n"
@@ -457,26 +482,6 @@ msgstr "'%s' odstraněn ze seznamu cílů, protože je konfliktní s '%s'\n"
 msgid "failed to retrieve some files from %s\n"
 msgstr "selhalo získání některých souborů z %s\n"
 
-#, c-format
-msgid "could not create removal transaction\n"
-msgstr "nelze vytvořit transakci pro odstranění\n"
-
-#, c-format
-msgid "could not create transaction\n"
-msgstr "nelze vytvořit transakci\n"
-
-#, c-format
-msgid "could not initialize the removal transaction\n"
-msgstr "nelze inicializovat transakci pro odstranění\n"
-
-#, c-format
-msgid "could not initialize transaction\n"
-msgstr "nelze inicializovat transakci\n"
-
-#, c-format
-msgid "could not prepare removal transaction\n"
-msgstr "nelze připravit transakci pro odstranění\n"
-
 #, c-format
 msgid "could not commit removal transaction\n"
 msgstr "nelze provést transakci pro odstranění\n"
@@ -485,6 +490,10 @@ msgstr "nelze provést transakci pro odstranění\n"
 msgid "could not commit transaction\n"
 msgstr "nelze provést transakci\n"
 
+#, c-format
+msgid "%s database version is too old\n"
+msgstr "verze databáze %s  je příliš stará\n"
+
 #, c-format
 msgid "could not remove lock file %s\n"
 msgstr "nelze odstranit zamykací soubor %s\n"
@@ -502,12 +511,8 @@ msgid "could not remove tmpdir %s\n"
 msgstr "nelze odstranit dočasný adresář %s\n"
 
 #, c-format
-msgid "could not open %s: %s\n"
-msgstr "nelze otevřít %s: %s\n"
-
-#, c-format
-msgid "could not change directory to %s (%s)\n"
-msgstr "nelze změnit adresář na %s (%s)\n"
+msgid "could not create pipe (%s)\n"
+msgstr "nepodařilo se vytvořit rouru (%s)\n"
 
 #, c-format
 msgid "could not fork a new process (%s)\n"
@@ -518,70 +523,25 @@ msgid "could not change the root directory (%s)\n"
 msgstr "nelze změnit kořenový adresář (%s)\n"
 
 #, c-format
-msgid "could not change directory to / (%s)\n"
-msgstr "nelze změnit adresář na / (%s)\n"
-
-#, c-format
-msgid "call to popen failed (%s)"
-msgstr "volání popen selhalo (%s)"
+msgid "call to execv failed (%s)\n"
+msgstr "volání execv selhalo (%s)\n"
 
 #, c-format
 msgid "call to waitpid failed (%s)\n"
 msgstr "volání waitpid selhalo (%s)\n"
 
+#, c-format
+msgid "could not open pipe (%s)\n"
+msgstr "nepodařilo se otevřít rouru (%s)\n"
+
 #, c-format
 msgid "command failed to execute correctly\n"
 msgstr "příkaz se nepodařilo spustit správně\n"
 
 #, c-format
 msgid "no %s cache exists, creating...\n"
-msgstr "neexistuje cache %s, vytváří se...\n"
+msgstr "neexistuje mezipaměť %s, vytváří se...\n"
 
 #, c-format
 msgid "couldn't create package cache, using /tmp instead\n"
-msgstr "nelze vytvořit cache balíčků, používá se /tmp\n"
-
-#~ msgid "error downloading '%s': %s\n"
-#~ msgstr "chyba při stahování '%s': %s\n"
-
-#~ msgid "could not chdir to %s\n"
-#~ msgstr "nelze změnit adresář na %s\n"
-
-#~ msgid "running XferCommand: fork failed!\n"
-#~ msgstr "spouští se XferCommand: větvení selhalo!\n"
-
-#~ msgid "could not commit transaction"
-#~ msgstr "nelze provést transakci"
-
-#~ msgid "could not download all files"
-#~ msgstr "nelze stáhnout všechny soubory"
-
-#~ msgid "cannot load package data"
-#~ msgstr "nelze načíst data z balíčku"
-
-#~ msgid "package not installed or lesser version"
-#~ msgstr "balíček není nainstalovaný nebo má nižší verzi"
-
-#~ msgid "group not found"
-#~ msgstr "skupina nebyla nalezena"
-
-#~ msgid "user aborted the operation"
-#~ msgstr "uživatel zrušil operaci"
-
-#~ msgid "internal error"
-#~ msgstr "interní chyba"
-
-#~ msgid "not confirmed"
-#~ msgstr "nepotvrzeno"
-
-#~ msgid "%s-%s: ignoring package upgrade (to be replaced by %s-%s)\n"
-#~ msgstr "%s-%s: ignoruje se aktualizace balíčku (měl být nahrazen %s-%s)\n"
-
-#~ msgid "command: %s\n"
-#~ msgstr "příkaz: %s\n"
-
-#~ msgid "could not prepare transaction\n"
-#~ msgstr "nelze připravit transakci\n"
-
-#~ msgid "No /bin/sh in parent environment, aborting scriptlet\n"
-#~ msgstr "V rodičovském prostředí chybí /bin/sh, ruší se provádění skriptů\n"
+msgstr "nelze vytvořit mezipaměť balíčků, používá se /tmp\n"

lib/libalpm/po/da.po

@@ -0,0 +1,546 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Pacman Development Team <pacman-dev@archlinux.org>
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: Arch Linux Pacman package manager\n"
+"Report-Msgid-Bugs-To: http://bugs.archlinux.org/index.php?project=3\n"
+"POT-Creation-Date: 2011-03-14 13:51-0500\n"
+"PO-Revision-Date: 2011-03-04 18:24+0000\n"
+"Last-Translator: toofishes <dpmcgee@gmail.com>\n"
+"Language-Team: Danish <None>\n"
+"Language: da\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+
+#, c-format
+msgid "%s-%s is up to date -- skipping\n"
+msgstr "%s-%s er opdateret - springer over\n"
+
+#, c-format
+msgid "%s-%s is up to date -- reinstalling\n"
+msgstr "%s-%s er opdateret - springer over\n"
+
+#, c-format
+msgid "downgrading package %s (%s => %s)\n"
+msgstr "nedgraderer pakke %s (%s => %s)\n"
+
+#, c-format
+msgid "warning given when extracting %s (%s)\n"
+msgstr ""
+
+#, c-format
+msgid "could not extract %s (%s)\n"
+msgstr "kunne ikke udtrække %s (%s)\n"
+
+#, c-format
+msgid ""
+"directory permissions differ on %s\n"
+"filesystem: %o  package: %o\n"
+msgstr ""
+"mapperettigheder er forskellige for %s\n"
+"filsystem: %o  pakke: %o\n"
+
+#, c-format
+msgid "extract: not overwriting dir with file %s\n"
+msgstr "udtræk: overskriver ikke mappe med fil %s\n"
+
+#, c-format
+msgid "extract: symlink %s does not point to dir\n"
+msgstr "udtræk: symbolsk henvisning %s peger ikke på mappe\n"
+
+#, c-format
+msgid "could not rename %s to %s (%s)\n"
+msgstr "kunne ikke omdøbe %s til %s (%s)\n"
+
+#, c-format
+msgid "%s saved as %s\n"
+msgstr "%s gemt som %s\n"
+
+#, c-format
+msgid "could not install %s as %s (%s)\n"
+msgstr "kunne ikke installere %s som %s (%s)\n"
+
+#, c-format
+msgid "%s installed as %s\n"
+msgstr "%s installeret som %s\n"
+
+#, c-format
+msgid "extracting %s as %s.pacnew\n"
+msgstr "udtrækker %s som %s.pacnew\n"
+
+#, c-format
+msgid "could not get current working directory\n"
+msgstr "kunne ikke hente aktuelt arbejdsmappe\n"
+
+#, c-format
+msgid "could not change directory to %s (%s)\n"
+msgstr "kunne ikke ændre mappe til %s (%s)\n"
+
+#, c-format
+msgid "problem occurred while upgrading %s\n"
+msgstr "der opstod et problem under opgradering %s\n"
+
+#, c-format
+msgid "problem occurred while installing %s\n"
+msgstr "der opstod et problem under installation af %s\n"
+
+#, c-format
+msgid "could not update database entry %s-%s\n"
+msgstr "kunne ikke opdatere databasepunkt %s-%s\n"
+
+#, c-format
+msgid "could not add entry '%s' in cache\n"
+msgstr "kunne ikke tilføje punkt »%s« i mellemlager\n"
+
+#, c-format
+msgid "removing invalid database: %s\n"
+msgstr "fjerner ugyldig database: %s\n"
+
+#, c-format
+msgid "invalid name for database entry '%s'\n"
+msgstr "ugyldigt navn for databasepunkt »%s«\n"
+
+#, c-format
+msgid "duplicated database entry '%s'\n"
+msgstr "duplikeret databasepunkt »%s«\n"
+
+#, c-format
+msgid "corrupted database entry '%s'\n"
+msgstr "ødelagt databasepunkt »%s«\n"
+
+#, c-format
+msgid "could not open file %s: %s\n"
+msgstr "kunne ikke åbne fil %s: %s\n"
+
+#, c-format
+msgid "%s database is inconsistent: name mismatch on package %s\n"
+msgstr "%s-database er inkonsistent: forskellige navne på pakke %s\n"
+
+#, c-format
+msgid "%s database is inconsistent: version mismatch on package %s\n"
+msgstr "%s-database er inkonsistent: forskellige versioner på pakke %s\n"
+
+#, c-format
+msgid "could not create directory %s: %s\n"
+msgstr "kunne ikke oprette mappe %s: %s\n"
+
+#, c-format
+msgid "could not parse package description file in %s\n"
+msgstr "kunne ikke fortolke pakkebeskrivelsesfil i %s\n"
+
+#, c-format
+msgid "missing package name in %s\n"
+msgstr "manglende pakkenavn i %s\n"
+
+#, c-format
+msgid "missing package version in %s\n"
+msgstr "manglende pakkeversion i %s\n"
+
+#, c-format
+msgid "error while reading package %s: %s\n"
+msgstr "der opstod en fejl under læsning af pakke %s: %s\n"
+
+#, c-format
+msgid "missing package metadata in %s\n"
+msgstr "manglende pakkemetadata i %s\n"
+
+#, c-format
+msgid "removing invalid file: %s\n"
+msgstr ""
+
+#, c-format
+msgid "database path is undefined\n"
+msgstr "databasesti er udefineret\n"
+
+#, c-format
+msgid "dependency cycle detected:\n"
+msgstr "afhængighedscyklus detekteret:\n"
+
+#, c-format
+msgid "%s will be removed after its %s dependency\n"
+msgstr "%s vil blive fjernet efter dennes %s-afhængighed\n"
+
+#, c-format
+msgid "%s will be installed before its %s dependency\n"
+msgstr "%s vil blive installeret før dennes %s-afhængighed\n"
+
+#, c-format
+msgid "ignoring package %s-%s\n"
+msgstr "ignorerer pakke %s-%s\n"
+
+#, c-format
+msgid "cannot resolve \"%s\", a dependency of \"%s\"\n"
+msgstr "kan ikke læse »%s«, en afhængighed af »%s«\n"
+
+#, c-format
+msgid "could not get filesystem information\n"
+msgstr ""
+
+#, c-format
+msgid "could not get filesystem information for %s: %s\n"
+msgstr ""
+
+#, c-format
+msgid "could not determine mount point for file %s"
+msgstr ""
+
+#, c-format
+msgid "could not determine filesystem mount points"
+msgstr ""
+
+#, c-format
+msgid "Partition %s is mounted read only\n"
+msgstr ""
+
+#, c-format
+msgid "Partition %s too full: %ld blocks needed, %ld blocks free\n"
+msgstr ""
+
+#, c-format
+msgid "disk"
+msgstr "disk"
+
+#, c-format
+msgid "url '%s' is invalid\n"
+msgstr "adressen »%s« er ugyldig\n"
+
+#, c-format
+msgid "failed retrieving file '%s' from %s : %s\n"
+msgstr "fejlede i indhentning af fil »%s« fra %s: %s\n"
+
+#, c-format
+msgid "resuming download of %s not possible; starting over\n"
+msgstr "det er ikke muligt at genoptage hentning af %s; starter forfra\n"
+
+#, c-format
+msgid "error writing to file '%s': %s\n"
+msgstr "fejl under skrivning til fil »%s«: %s\n"
+
+#, c-format
+msgid "failed retrieving file '%s' from %s\n"
+msgstr "kunne ikke indhente fil »%s« fra %s\n"
+
+#, c-format
+msgid "%s appears to be truncated: %jd/%jd bytes\n"
+msgstr "%s ser ud til at være afkortet: %jd/%jd byte\n"
+
+#, c-format
+msgid "failed to download %s\n"
+msgstr "kunne ikke hente %s\n"
+
+#, c-format
+msgid "out of memory!"
+msgstr "ikke nok hukommelse!"
+
+#, c-format
+msgid "unexpected system error"
+msgstr "uventet systemfejl"
+
+#, c-format
+msgid "insufficient privileges"
+msgstr "utilstrækkelige privilegier"
+
+#, c-format
+msgid "could not find or read file"
+msgstr "kunne ikke finde eller læse fil"
+
+#, c-format
+msgid "could not find or read directory"
+msgstr "kunne ikke finde eller læse mappe"
+
+#, c-format
+msgid "wrong or NULL argument passed"
+msgstr "forkert eller NULL-argument vidersendt"
+
+#, c-format
+msgid "not enough free disk space"
+msgstr ""
+
+#, c-format
+msgid "library not initialized"
+msgstr "bibliotek er ikke initialiseret"
+
+#, c-format
+msgid "library already initialized"
+msgstr "bibliotek er allerede initialiseret"
+
+#, c-format
+msgid "unable to lock database"
+msgstr "kunne ikke låse database"
+
+#, c-format
+msgid "could not open database"
+msgstr "kunne ikke åbne database"
+
+#, c-format
+msgid "could not create database"
+msgstr "kunne ikke oprette database"
+
+#, c-format
+msgid "database not initialized"
+msgstr "database er ikke initialiseret"
+
+#, c-format
+msgid "database already registered"
+msgstr "database er allerede registreret"
+
+#, c-format
+msgid "could not find database"
+msgstr "kunne ikke finde database"
+
+#, c-format
+msgid "database is incorrect version"
+msgstr ""
+
+#, c-format
+msgid "could not update database"
+msgstr "kunne ikke opdatere database"
+
+#, c-format
+msgid "could not remove database entry"
+msgstr "kunne ikke fjerne databasepunkt"
+
+#, c-format
+msgid "invalid url for server"
+msgstr "ugyldig adresse for server"
+
+#, c-format
+msgid "no servers configured for repository"
+msgstr "ingen servere konfigureret for arkiv"
+
+#, c-format
+msgid "transaction already initialized"
+msgstr "transaktion allerede initialiseret"
+
+#, c-format
+msgid "transaction not initialized"
+msgstr "transaktion er ikke initialiseret"
+
+#, c-format
+msgid "duplicate target"
+msgstr "dupliker mål"
+
+#, c-format
+msgid "transaction not prepared"
+msgstr "transaktion er ikke forberedt"
+
+#, c-format
+msgid "transaction aborted"
+msgstr "transaktion afbrudt"
+
+#, c-format
+msgid "operation not compatible with the transaction type"
+msgstr "handling er ikke kompatibel med transaktionstype"
+
+#, c-format
+msgid "transaction commit attempt when database is not locked"
+msgstr "forsøg på transaktionsindsendelse (commit) når database ikke er låst"
+
+#, c-format
+msgid "could not find or read package"
+msgstr "kunne ikke finde eller læse pakke"
+
+#, c-format
+msgid "operation cancelled due to ignorepkg"
+msgstr "handling afbrudt på grund af igonrepkg"
+
+#, c-format
+msgid "invalid or corrupted package"
+msgstr "ugyldig eller ødelagt pakke"
+
+#, c-format
+msgid "cannot open package file"
+msgstr "kan ikke åbne pakkefil"
+
+#, c-format
+msgid "cannot remove all files for package"
+msgstr "kan ikke fjerne alle filer for pakke"
+
+#, c-format
+msgid "package filename is not valid"
+msgstr "pakkefilnavn er ugyldigt"
+
+#, c-format
+msgid "package architecture is not valid"
+msgstr "pakkearkitektur er ikke gyldig"
+
+#, c-format
+msgid "could not find repository for target"
+msgstr "kunne ikke finde arkiv for mål"
+
+#, c-format
+msgid "invalid or corrupted delta"
+msgstr "ugyldig eller ødelagt delta"
+
+#, c-format
+msgid "delta patch failed"
+msgstr "deltarettelse (patch) fejlede"
+
+#, c-format
+msgid "could not satisfy dependencies"
+msgstr "kunne ikke tilfredsstille afhængigheder"
+
+#, c-format
+msgid "conflicting dependencies"
+msgstr "konfliktende afhængigheder"
+
+#, c-format
+msgid "conflicting files"
+msgstr "konfliktende filer"
+
+#, c-format
+msgid "failed to retrieve some files"
+msgstr "kunne ikke indhente nogle filer"
+
+#, c-format
+msgid "failed to copy some file"
+msgstr ""
+
+#, c-format
+msgid "invalid regular expression"
+msgstr "ugyldigt regulært udtryk"
+
+#, c-format
+msgid "libarchive error"
+msgstr "biblioteksarkivfejl"
+
+#, c-format
+msgid "download library error"
+msgstr "hent biblioteksfejl"
+
+#, c-format
+msgid "error invoking external downloader"
+msgstr "fejl under opstart af ekstern hentningsprogram"
+
+#, c-format
+msgid "unexpected error"
+msgstr "uventet fejl"
+
+#, c-format
+msgid "database larger than maximum size\n"
+msgstr ""
+
+#, c-format
+msgid "could not find %s in database -- skipping\n"
+msgstr "kunne ikke finde %s i database - springer over\n"
+
+#, c-format
+msgid "removing %s from target list\n"
+msgstr "fjerner %s fra målliste\n"
+
+#, c-format
+msgid "cannot remove file '%s': %s\n"
+msgstr "kan ikke fjerne fil »%s«:%s\n"
+
+#, c-format
+msgid "could not remove database entry %s-%s\n"
+msgstr "kunne ikke fjerne databasepunkt %s-%s\n"
+
+#, c-format
+msgid "could not remove entry '%s' from cache\n"
+msgstr "kunne ikke fjerne punkt '%s' fra mellemlager\n"
+
+#, c-format
+msgid "%s: ignoring package upgrade (%s => %s)\n"
+msgstr "%s: ignorerer pakkeopgradering (%s => %s)\n"
+
+#, c-format
+msgid "%s: ignoring package downgrade (%s => %s)\n"
+msgstr "%s: ignorerer pakkenedgradering (%s => %s)\n"
+
+#, c-format
+msgid "%s: downgrading from version %s to version %s\n"
+msgstr "%s: nedgraderer fra version %s til version %s\n"
+
+#, c-format
+msgid "%s: local (%s) is newer than %s (%s)\n"
+msgstr "%s: lokal (%s) er nyere end %s (%s)\n"
+
+#, c-format
+msgid "ignoring package replacement (%s-%s => %s-%s)\n"
+msgstr "ignorerer pakkeerstatning (%s-%s => %s-%s)\n"
+
+#, c-format
+msgid "cannot replace %s by %s\n"
+msgstr "kan ikke erstatte %s med %s\n"
+
+#, c-format
+msgid "unresolvable package conflicts detected\n"
+msgstr "pakkekonflikter, der ikke kan løses, er detekteret\n"
+
+#, c-format
+msgid "removing '%s' from target list because it conflicts with '%s'\n"
+msgstr "fjerner »%s« fra målliste da det konflikter med »%s«\n"
+
+#, c-format
+msgid "failed to retrieve some files from %s\n"
+msgstr "kunne ikke indhente nogle filer fra %s\n"
+
+#, c-format
+msgid "could not commit removal transaction\n"
+msgstr "kunne ikke indsende (commit) fjernelsestransaktion\n"
+
+#, c-format
+msgid "could not commit transaction\n"
+msgstr "kunne ikke indsende (commit) transaktion\n"
+
+#, c-format
+msgid "%s database version is too old\n"
+msgstr ""
+
+#, c-format
+msgid "could not remove lock file %s\n"
+msgstr "kunne ikke fjerne låsningsfil %s\n"
+
+#, c-format
+msgid "could not create temp directory\n"
+msgstr "kunne ikke oprette midlertidig mappe\n"
+
+#, c-format
+msgid "could not copy tempfile to %s (%s)\n"
+msgstr "kunne ikke kopier midlertidig fil til %s (%s)\n"
+
+#, c-format
+msgid "could not remove tmpdir %s\n"
+msgstr "kunne ikke fjerne tmpdir %s\n"
+
+#, c-format
+msgid "could not create pipe (%s)\n"
+msgstr ""
+
+#, c-format
+msgid "could not fork a new process (%s)\n"
+msgstr "kunne ikke forgren en ny proces (%s)\n"
+
+#, c-format
+msgid "could not change the root directory (%s)\n"
+msgstr "kunne ikke ændre rodmappen (%s)\n"
+
+#, c-format
+msgid "call to execv failed (%s)\n"
+msgstr ""
+
+#, c-format
+msgid "call to waitpid failed (%s)\n"
+msgstr "kald til waitpid fejlede (%s)\n"
+
+#, c-format
+msgid "could not open pipe (%s)\n"
+msgstr ""
+
+#, c-format
+msgid "command failed to execute correctly\n"
+msgstr "kommando kunne ikke udføres korrekt\n"
+
+#, c-format
+msgid "no %s cache exists, creating...\n"
+msgstr "intet %s-mellemlager findes, opretter...\n"
+
+#, c-format
+msgid "couldn't create package cache, using /tmp instead\n"
+msgstr "kunne ikke oprette pakkemellemlager, bruger /tmp i steden for\n"

lib/libalpm/po/de.po

@@ -1,51 +1,41 @@
-# translation of de.po to German
-# German translations for Pacman package manager package.
-# Copyright (C) 2002-2008 Judd Vinet <jvinet@zeroflux.org>
-# This file is distributed under the same license as the Pacman package manager package.
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Pacman Development Team <pacman-dev@archlinux.org>
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
 #
-# Marcus Habermehl <bmh1980@frugalware.org>, 2006.
-# Pierre Schmitz <pierre@archlinux.de>, 2007.
-# Niclas Pfeifer <macwolf@archlinux.de>, 2007.
-# Matthias Gorissen <matthias@archlinux.de>, 2008-2009.
 msgid ""
 msgstr ""
-"Project-Id-Version: de\n"
-"Report-Msgid-Bugs-To: pacman-dev@archlinux.org\n"
-"POT-Creation-Date: 2009-07-27 21:15-0500\n"
-"PO-Revision-Date: 2009-07-29 16:09+0100\n"
-"Last-Translator: Matthias Gorissen <matthias@archlinux.de>\n"
-"Language-Team: German <archlinux.de>\n"
+"Project-Id-Version: Arch Linux Pacman package manager\n"
+"Report-Msgid-Bugs-To: http://bugs.archlinux.org/index.php?project=3\n"
+"POT-Creation-Date: 2011-03-14 13:51-0500\n"
+"PO-Revision-Date: 2011-03-08 14:50+0000\n"
+"Last-Translator: tlaloc <matthias@archlinux.de>\n"
+"Language-Team: German <None>\n"
+"Language: de\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);X-Generator: KBabel 1.11.4\n"
-"X-Generator: KBabel 1.11.4\n"
+"Plural-Forms: nplurals=2; plural=(n != 1)\n"
 
 #, c-format
-msgid "replacing older version %s-%s by %s in target list\n"
-msgstr "Ersetze ältere Version %s-%s durch %s in der Ziel-Liste\n"
+msgid "%s-%s is up to date -- skipping\n"
+msgstr "%s-%s ist aktuell -- Überspringe\n"
 
 #, c-format
-msgid "skipping %s-%s because newer version %s is in the target list\n"
-msgstr "Überspringe %s-%s, da die Ziel-Liste die neuere Version %s enthält\n"
+msgid "%s-%s is up to date -- reinstalling\n"
+msgstr "%s-%s ist aktuell -- Reinstalliere\n"
 
 #, c-format
-msgid "conflicting packages were found in the target list\n"
-msgstr "In Konflikt stehende Pakete wurden in Ziel-Liste gefunden\n"
+msgid "downgrading package %s (%s => %s)\n"
+msgstr "Downgrade des Paketes %s (%s => %s)\n"
 
 #, c-format
-msgid "you cannot install two conflicting packages at the same time\n"
-msgstr ""
-"Sie können nicht zwei in Konflikt stehende Pakete zur selben Zeit "
-"installieren\n"
+msgid "warning given when extracting %s (%s)\n"
+msgstr "Es erscheint eine Warnung, wenn %s extrahiert wird (%s)\n"
 
 #, c-format
-msgid "replacing packages with -U is not supported yet\n"
-msgstr "Das Ersetzen von Paketen mit -U wird noch nicht unterstützt\n"
-
-#, c-format
-msgid "you can replace packages manually using -Rd and -U\n"
-msgstr "Sie können Pakete manuell mit -Rd und -U ersetzen\n"
+msgid "could not extract %s (%s)\n"
+msgstr "Konnte %s nicht entpacken (%s)\n"
 
 #, c-format
 msgid ""
@@ -63,10 +53,6 @@ msgstr "Entpacken: Überschreibe Verzeichnis nicht mit Datei %s\n"
 msgid "extract: symlink %s does not point to dir\n"
 msgstr "Entpacken: Symlink %s zeigt nicht zum Verzeichnis\n"
 
-#, c-format
-msgid "could not extract %s (%s)\n"
-msgstr "Konnte %s nicht entpacken (%s)\n"
-
 #, c-format
 msgid "could not rename %s to %s (%s)\n"
 msgstr "Konnte %s nicht in %s umbenennen (%s)\n"
@@ -91,6 +77,10 @@ msgstr "Entpacke %s als %s.pacnew\n"
 msgid "could not get current working directory\n"
 msgstr "Konnte aktuelles Arbeitsverzeichnis nicht ermitteln\n"
 
+#, c-format
+msgid "could not change directory to %s (%s)\n"
+msgstr "Konnte nicht zu Verzeichnis %s wechseln (%s)\n"
+
 #, c-format
 msgid "problem occurred while upgrading %s\n"
 msgstr "Fehler traten auf, während %s aktualisiert wurde\n"
@@ -108,13 +98,17 @@ msgid "could not add entry '%s' in cache\n"
 msgstr "Konnte Eintrag '%s' nicht zum Pufferspeicher hinzufügen\n"
 
 #, c-format
-msgid "could not remove database %s\n"
-msgstr "Konnte Datenbank %s nicht entfernen\n"
+msgid "removing invalid database: %s\n"
+msgstr "Entferne die ungültige Datenbank: %s\n"
 
 #, c-format
 msgid "invalid name for database entry '%s'\n"
 msgstr "Ungültiger Name für Datenbank-Eintrag '%s'\n"
 
+#, c-format
+msgid "duplicated database entry '%s'\n"
+msgstr "Doppelter Datenbank-Eintrag '%s'\n"
+
 #, c-format
 msgid "corrupted database entry '%s'\n"
 msgstr "Beschädigter Datenbank-Eintrag '%s'\n"
@@ -160,8 +154,8 @@ msgid "missing package metadata in %s\n"
 msgstr "Fehlende Paket-Metadaten in %s\n"
 
 #, c-format
-msgid "attempt to re-register the 'local' DB\n"
-msgstr "Versuche die lokale Datenbank neu zu registrieren\n"
+msgid "removing invalid file: %s\n"
+msgstr "Entferne ungültige Datei: %s\n"
 
 #, c-format
 msgid "database path is undefined\n"
@@ -183,42 +177,59 @@ msgstr "%s wird vor seiner Abhängigkeit %s installiert werden\n"
 msgid "ignoring package %s-%s\n"
 msgstr "Ignoriere Paket %s-%s)\n"
 
-#, c-format
-msgid "provider package was selected (%s provides %s)\n"
-msgstr "Bereitstellendes Paket wurde ausgewählt (%s enthält %s)\n"
-
 #, c-format
 msgid "cannot resolve \"%s\", a dependency of \"%s\"\n"
 msgstr "Kann \"%s\" nicht auflösen (eine Abhängigkeit von \"%s\")\n"
 
 #, c-format
-msgid "url '%s' is invalid\n"
-msgstr "URL '%s' ist ungültig\n"
+msgid "could not get filesystem information\n"
+msgstr "Konnte keine Dateisystem-Informationen erhalten\n"
 
 #, c-format
-msgid "url scheme not specified, assuming HTTP\n"
-msgstr "URL-Schema nicht spezifiziert, vermute HTTP\n"
+msgid "could not get filesystem information for %s: %s\n"
+msgstr "Konnte keine Dateisystem-Informationen für %s erhalten: %s\n"
+
+#, c-format
+msgid "could not determine mount point for file %s"
+msgstr "Konnte keinen Einhänge-Punkt für die Datei %s ermitteln"
+
+#, c-format
+msgid "could not determine filesystem mount points"
+msgstr "Konnte die Einhängepunkte des Dateisystems nicht bestimmen"
+
+#, c-format
+msgid "Partition %s is mounted read only\n"
+msgstr "Die Partition %s ist so eingehängt, daß sie nur gelesen werden kann\n"
+
+#, c-format
+msgid "Partition %s too full: %ld blocks needed, %ld blocks free\n"
+msgstr ""
+"Partition %s überfüllt: %ld Blöcke werden benötigt, %ld Blöcke sind frei\n"
 
 #, c-format
 msgid "disk"
 msgstr "Platte"
 
+#, c-format
+msgid "url '%s' is invalid\n"
+msgstr "URL '%s' ist ungültig\n"
+
 #, c-format
 msgid "failed retrieving file '%s' from %s : %s\n"
 msgstr "Konnte Datei '%s' nicht von %s übertragen : %s\n"
 
 #, c-format
-msgid "cannot resume download, starting over\n"
-msgstr "Kann den Download nicht wieder aufnehmen, starte neu\n"
-
-#, c-format
-msgid "cannot write to file '%s'\n"
-msgstr "Kann Datei '%s' nicht beschreiben\n"
+msgid "resuming download of %s not possible; starting over\n"
+msgstr "Kann den Download von %s nicht wieder aufnehmen, starte neu\n"
 
 #, c-format
 msgid "error writing to file '%s': %s\n"
 msgstr "Fehler beim Beschreiben von Datei '%s': %s\n"
 
+#, c-format
+msgid "failed retrieving file '%s' from %s\n"
+msgstr "Konnte Datei '%s' nicht von %s übertragen\n"
+
 #, c-format
 msgid "%s appears to be truncated: %jd/%jd bytes\n"
 msgstr "%s scheint verstümmelt zu sein: %jd/%jd Byte\n"
@@ -251,6 +262,10 @@ msgstr "Konnte Verzeichnis nicht finden oder lesen"
 msgid "wrong or NULL argument passed"
 msgstr "Falsches oder NULL-Argument übergeben"
 
+#, c-format
+msgid "not enough free disk space"
+msgstr "Nicht genug freier Festplattenplatz"
+
 #, c-format
 msgid "library not initialized"
 msgstr "Bibliothek nicht initialisiert"
@@ -283,6 +298,10 @@ msgstr "Datenbank bereits registriert"
 msgid "could not find database"
 msgstr "Konnte Datenbank nicht finden"
 
+#, c-format
+msgid "database is incorrect version"
+msgstr "Keine korrekte Version der Datenbank"
+
 #, c-format
 msgid "could not update database"
 msgstr "Konnte Datenbank nicht aktualisieren"
@@ -353,8 +372,12 @@ msgid "package filename is not valid"
 msgstr "Der Dateiname des Paketes ist nicht gültig"
 
 #, c-format
-msgid "no such repository"
-msgstr "Kein solches Repositorium"
+msgid "package architecture is not valid"
+msgstr "Die Paket-Architektur ist ungültig"
+
+#, c-format
+msgid "could not find repository for target"
+msgstr "Konnte kein Repositorium für das Ziel finden"
 
 #, c-format
 msgid "invalid or corrupted delta"
@@ -380,6 +403,10 @@ msgstr "In Konflikt stehende Dateien"
 msgid "failed to retrieve some files"
 msgstr "Konnte manche Dateien nicht übertragen"
 
+#, c-format
+msgid "failed to copy some file"
+msgstr "Konnte irgendeine Datei nicht kopieren"
+
 #, c-format
 msgid "invalid regular expression"
 msgstr "Ungültiger Regulärer Ausdruck"
@@ -400,10 +427,18 @@ msgstr "Fehler beim Aufruf eines externen Downloaders"
 msgid "unexpected error"
 msgstr "Unerwarteter Fehler"
 
+#, c-format
+msgid "database larger than maximum size\n"
+msgstr "Datenbank überschreitet die maximal erlaubte Größe\n"
+
 #, c-format
 msgid "could not find %s in database -- skipping\n"
 msgstr "Konnte %s nicht in Datenbank finden -- Überspringe\n"
 
+#, c-format
+msgid "removing %s from target list\n"
+msgstr "Entferne '%s' aus der Ziel-Liste\n"
+
 #, c-format
 msgid "cannot remove file '%s': %s\n"
 msgstr "Kann Datei '%s' nicht entfernen: %s\n"
@@ -440,22 +475,6 @@ msgstr "Ignoriere Paket-Ersetzung (%s-%s => %s-%s)\n"
 msgid "cannot replace %s by %s\n"
 msgstr "Kann %s nicht durch %s ersetzen\n"
 
-#, c-format
-msgid "repository '%s' not found\n"
-msgstr "Repositorium '%s' nicht gefunden\n"
-
-#, c-format
-msgid "%s-%s is up to date -- skipping\n"
-msgstr "%s-%s ist aktuell -- Überspringe\n"
-
-#, c-format
-msgid "%s-%s is up to date -- reinstalling\n"
-msgstr "%s-%s ist aktuell -- Reinstalliere\n"
-
-#, c-format
-msgid "downgrading package %s (%s => %s)\n"
-msgstr "Downgrade des Paketes %s (%s => %s)\n"
-
 #, c-format
 msgid "unresolvable package conflicts detected\n"
 msgstr "Nicht lösbare Paketkonflikte gefunden\n"
@@ -468,26 +487,6 @@ msgstr "Entferne '%s' aus der Ziel-Liste, da es mit '%s' in Konflikt steht\n"
 msgid "failed to retrieve some files from %s\n"
 msgstr "Konnte manche Dateien von %s nicht übertragen\n"
 
-#, c-format
-msgid "could not create removal transaction\n"
-msgstr "Konnte den Lösch-Vorgang nicht erstellen\n"
-
-#, c-format
-msgid "could not create transaction\n"
-msgstr "Konnte den Vorgang nicht erstellen\n"
-
-#, c-format
-msgid "could not initialize the removal transaction\n"
-msgstr "Konnte den Lösch-Vorgang nicht beginnen\n"
-
-#, c-format
-msgid "could not initialize transaction\n"
-msgstr "Konnte den Vorgang nicht beginnen\n"
-
-#, c-format
-msgid "could not prepare removal transaction\n"
-msgstr "Konnte Lösch-Vorgang nicht vorbereiten\n"
-
 #, c-format
 msgid "could not commit removal transaction\n"
 msgstr "Konnte Lösch-Vorgang nicht durchführen\n"
@@ -496,6 +495,10 @@ msgstr "Konnte Lösch-Vorgang nicht durchführen\n"
 msgid "could not commit transaction\n"
 msgstr "Konnte den Vorgang nicht durchführen\n"
 
+#, c-format
+msgid "%s database version is too old\n"
+msgstr "Datenbank-Version %s ist zu alt\n"
+
 #, c-format
 msgid "could not remove lock file %s\n"
 msgstr "Konnte Sperrdatei %s nicht entfernen\n"
@@ -513,12 +516,8 @@ msgid "could not remove tmpdir %s\n"
 msgstr "Konnte temporäres Verzeichnis %s nicht entfernen\n"
 
 #, c-format
-msgid "could not open %s: %s\n"
-msgstr "Konnte Datei %s nicht öffnen: %s\n"
-
-#, c-format
-msgid "could not change directory to %s (%s)\n"
-msgstr "Konnte nicht zu Verzeichnis %s wechseln (%s)\n"
+msgid "could not create pipe (%s)\n"
+msgstr "Konnte Weiterleitung nicht erstellen (%s)\n"
 
 #, c-format
 msgid "could not fork a new process (%s)\n"
@@ -529,17 +528,17 @@ msgid "could not change the root directory (%s)\n"
 msgstr "Konnte Root-Verzeichnis nicht wechseln (%s)\n"
 
 #, c-format
-msgid "could not change directory to / (%s)\n"
-msgstr "Konnte nicht zu Verzeichnis / (%s) wechseln\n"
-
-#, c-format
-msgid "call to popen failed (%s)"
-msgstr "Aufruf von 'popen' fehlgeschlagen (%s)"
+msgid "call to execv failed (%s)\n"
+msgstr "Konnte execv nicht aufrufen (%s)\n"
 
 #, c-format
 msgid "call to waitpid failed (%s)\n"
 msgstr "Aufruf von 'waitpid' fehlgeschlagen (%s)\n"
 
+#, c-format
+msgid "could not open pipe (%s)\n"
+msgstr "Konnte Weiterleitung nicht öffnen (%s)\n"
+
 #, c-format
 msgid "command failed to execute correctly\n"
 msgstr "Befehl konnte nicht korrekt ausgeführt werden\n"

lib/libalpm/po/el.po

@@ -0,0 +1,547 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Pacman Development Team <pacman-dev@archlinux.org>
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: Arch Linux Pacman package manager\n"
+"Report-Msgid-Bugs-To: http://bugs.archlinux.org/index.php?project=3\n"
+"POT-Creation-Date: 2011-03-14 13:51-0500\n"
+"PO-Revision-Date: 2011-03-05 00:39+0000\n"
+"Last-Translator: nous <nous@archlinux.us>\n"
+"Language-Team: Greek <None>\n"
+"Language: el\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1)\n"
+
+#, c-format
+msgid "%s-%s is up to date -- skipping\n"
+msgstr "%s-%s ενημερωμένο -- παράλειψη\n"
+
+#, c-format
+msgid "%s-%s is up to date -- reinstalling\n"
+msgstr "%s-%s ενημερωμένο -- επανεγκατάσταση\n"
+
+#, c-format
+msgid "downgrading package %s (%s => %s)\n"
+msgstr "υποβάθμιση πακέτου %s (%s => %s)\n"
+
+#, c-format
+msgid "warning given when extracting %s (%s)\n"
+msgstr "προειδοποίηση κατά την εξαγωγή του %s (%s)\n"
+
+#, c-format
+msgid "could not extract %s (%s)\n"
+msgstr "αδυναμία εξαγωγής %s (%s)\n"
+
+#, c-format
+msgid ""
+"directory permissions differ on %s\n"
+"filesystem: %o  package: %o\n"
+msgstr ""
+"τα δικαιώματα καταλόγου διαφέρουν στο %s\n"
+"σύστημα αρχείων: %o  πακέτο: %o\n"
+
+#, c-format
+msgid "extract: not overwriting dir with file %s\n"
+msgstr "εξαγωγή: μη αντικατάσταση καταλόγου από αρχείο %s\n"
+
+#, c-format
+msgid "extract: symlink %s does not point to dir\n"
+msgstr "εξαγωγή: ο συμβολικός δεσμός %s δεν δείχνει σε κατάλογο\n"
+
+#, c-format
+msgid "could not rename %s to %s (%s)\n"
+msgstr "αδυναμία μετονομασίας %s σε %s (%s)\n"
+
+#, c-format
+msgid "%s saved as %s\n"
+msgstr "αποθήκευση %s ως %s\n"
+
+#, c-format
+msgid "could not install %s as %s (%s)\n"
+msgstr "αδυναμία εγκατάστασης %s ως %s (%s)\n"
+
+#, c-format
+msgid "%s installed as %s\n"
+msgstr "εγκατάσταση %s ως %s\n"
+
+#, c-format
+msgid "extracting %s as %s.pacnew\n"
+msgstr "εξαγωγή %s ως %s.pacnew\n"
+
+#, c-format
+msgid "could not get current working directory\n"
+msgstr "αδυναμία χρήσης τρέχοντος καταλόγου\n"
+
+#, c-format
+msgid "could not change directory to %s (%s)\n"
+msgstr "αδυναμία μετάβασης στον κατάλογο %s (%s)\n"
+
+#, c-format
+msgid "problem occurred while upgrading %s\n"
+msgstr "πρόβλημα κατά την αναβάθμιση του %s\n"
+
+#, c-format
+msgid "problem occurred while installing %s\n"
+msgstr "πρόβλημα κατά την εγκατάσταση του %s\n"
+
+#, c-format
+msgid "could not update database entry %s-%s\n"
+msgstr "αδυναμία ενημέρωσης εγγραφής %s-%s στην βάση\n"
+
+#, c-format
+msgid "could not add entry '%s' in cache\n"
+msgstr "αδυναμία προσθήκης εγγραφής '%s' στην κρύπτη\n"
+
+#, c-format
+msgid "removing invalid database: %s\n"
+msgstr "διαγραφή άκυρης βάσης: %s\n"
+
+#, c-format
+msgid "invalid name for database entry '%s'\n"
+msgstr "άκυρο όνομα εγγραφής βάσης '%s'\n"
+
+#, c-format
+msgid "duplicated database entry '%s'\n"
+msgstr "διπλότυπη εγγραφή βάσης '%s'\n"
+
+#, c-format
+msgid "corrupted database entry '%s'\n"
+msgstr "κατεστραμμένη εγγραφή βάσης '%s'\n"
+
+#, c-format
+msgid "could not open file %s: %s\n"
+msgstr "αδυναμία ανάγνωσης αρχείου %s: %s\n"
+
+#, c-format
+msgid "%s database is inconsistent: name mismatch on package %s\n"
+msgstr "ανακολουθία στην βάση %s: ασυμφωνία ονόματος πακέτου %s\n"
+
+#, c-format
+msgid "%s database is inconsistent: version mismatch on package %s\n"
+msgstr "ανακολουθία στην βάση %s: ασυμφωνία έκδοσης πακέτου %s\n"
+
+#, c-format
+msgid "could not create directory %s: %s\n"
+msgstr "αδυναμία δημιουργίας καταλόγου %s: %s\n"
+
+#, c-format
+msgid "could not parse package description file in %s\n"
+msgstr "αδυναμία ανάλυσης αρχείου περιγραφής πακέτου στο %s\n"
+
+#, c-format
+msgid "missing package name in %s\n"
+msgstr "απόν όνομα πακέτου στο %s\n"
+
+#, c-format
+msgid "missing package version in %s\n"
+msgstr "απούσα έκδοση πακέτου στο %s\n"
+
+#, c-format
+msgid "error while reading package %s: %s\n"
+msgstr "σφάλμα ανάγνωσης πακέτου %s: %s\n"
+
+#, c-format
+msgid "missing package metadata in %s\n"
+msgstr "απόντα μετα-δεδομένα πακέτου στο %s\n"
+
+#, c-format
+msgid "removing invalid file: %s\n"
+msgstr "διαγραφή άκυρου αρχείου: %s\n"
+
+#, c-format
+msgid "database path is undefined\n"
+msgstr "ακαθόριστη διαδρομή βάσης\n"
+
+#, c-format
+msgid "dependency cycle detected:\n"
+msgstr "εντοπισμός κυκλικής εξάρτησης:\n"
+
+#, c-format
+msgid "%s will be removed after its %s dependency\n"
+msgstr "κατάργηση του %s μετά την εξάρτησή του %s\n"
+
+#, c-format
+msgid "%s will be installed before its %s dependency\n"
+msgstr "εγκατάσταση του %s πρίν από την εξάρτησή του %s\n"
+
+#, c-format
+msgid "ignoring package %s-%s\n"
+msgstr "παράβλεψη πακέτου %s-%s\n"
+
+#, c-format
+msgid "cannot resolve \"%s\", a dependency of \"%s\"\n"
+msgstr "αδυναμία εύρεσης του \"%s\", εξάρτησης του \"%s\"\n"
+
+#, c-format
+msgid "could not get filesystem information\n"
+msgstr "αδυναμία λήψης πληροφοριών συστήματος αρχείων\n"
+
+#, c-format
+msgid "could not get filesystem information for %s: %s\n"
+msgstr "αδυναμία λήψης πληροφοριών συστήματος αρχείων για το %s: %s\n"
+
+#, c-format
+msgid "could not determine mount point for file %s"
+msgstr "αδυναμία καθορισμού σημείου προσάρτησης αρχείου %s"
+
+#, c-format
+msgid "could not determine filesystem mount points"
+msgstr "αδυναμία καθορισμού σημείων προσάρτησης συστήματος αρχείων"
+
+#, c-format
+msgid "Partition %s is mounted read only\n"
+msgstr "Kατάτμηση %s: προσαρτημένη μόνο για ανάγνωση\n"
+
+#, c-format
+msgid "Partition %s too full: %ld blocks needed, %ld blocks free\n"
+msgstr "Kατάτμηση %s πλήρης: %ld blocks απαιτούνται, %ld ελεύθερα\n"
+
+#, c-format
+msgid "disk"
+msgstr "δίσκο"
+
+#, c-format
+msgid "url '%s' is invalid\n"
+msgstr "άκυρη διεύθυνση '%s'\n"
+
+#, c-format
+msgid "failed retrieving file '%s' from %s : %s\n"
+msgstr "αποτυχία λήψης αρχείου '%s' από %s : %s\n"
+
+#, c-format
+msgid "resuming download of %s not possible; starting over\n"
+msgstr "συνέχιση λήψης %s αδύνατη, επανεκκίνηση\n"
+
+#, c-format
+msgid "error writing to file '%s': %s\n"
+msgstr "σφάλμα εγγραφής στο '%s': %s\n"
+
+#, c-format
+msgid "failed retrieving file '%s' from %s\n"
+msgstr "αποτυχία λήψης αρχείου '%s' από %s\n"
+
+#, c-format
+msgid "%s appears to be truncated: %jd/%jd bytes\n"
+msgstr "το %s δείχνει ημιτελές: %jd/%jd bytes\n"
+
+#, c-format
+msgid "failed to download %s\n"
+msgstr "αποτυχία λήψης %s\n"
+
+#, c-format
+msgid "out of memory!"
+msgstr "ανεπαρκής μνήμη!"
+
+#, c-format
+msgid "unexpected system error"
+msgstr "απροσδόκητο σφάλμα συστήματος"
+
+#, c-format
+msgid "insufficient privileges"
+msgstr "ανεπαρκή προνόμια"
+
+#, c-format
+msgid "could not find or read file"
+msgstr "αδυναμία εύρεσης ή ανάγνωσης αρχείου"
+
+#, c-format
+msgid "could not find or read directory"
+msgstr "αδυναμία εύρεσης ή ανάγνωσης καταλόγου"
+
+#, c-format
+msgid "wrong or NULL argument passed"
+msgstr "εσφαλμένο ή NULL όρισμα"
+
+#, c-format
+msgid "not enough free disk space"
+msgstr "ανεπαρκής ελεύθερος χώρος στον δίσκο"
+
+#, c-format
+msgid "library not initialized"
+msgstr "βιβλιοθήκη μη εκκινηθείσα"
+
+#, c-format
+msgid "library already initialized"
+msgstr "βιβλιοθήκη ήδη εκκινηθείσα"
+
+#, c-format
+msgid "unable to lock database"
+msgstr "αδυναμία κλειδώματος βάσης"
+
+#, c-format
+msgid "could not open database"
+msgstr "αδυναμία ανάγνωσης βάσης"
+
+#, c-format
+msgid "could not create database"
+msgstr "αδυναμία δημιουργίας βάσης"
+
+#, c-format
+msgid "database not initialized"
+msgstr "βάση μη εκκινηθείσα"
+
+#, c-format
+msgid "database already registered"
+msgstr "βάση ήδη εκκινηθείσα"
+
+#, c-format
+msgid "could not find database"
+msgstr "αδυναμία εύρεσης βάσης"
+
+#, c-format
+msgid "database is incorrect version"
+msgstr "εσφαλμένη έκδοση βάσης"
+
+#, c-format
+msgid "could not update database"
+msgstr "αδυναμία ενημέρωσης βάσης"
+
+#, c-format
+msgid "could not remove database entry"
+msgstr "αδυναμία κατάργησης εγγραφής βάσης"
+
+#, c-format
+msgid "invalid url for server"
+msgstr "άκυρη διεύθυνση διακομιστή"
+
+#, c-format
+msgid "no servers configured for repository"
+msgstr "ακαθόριστοι διακομιστές αποθήκης"
+
+#, c-format
+msgid "transaction already initialized"
+msgstr "διεκπεραίωση ήδη εκκινηθείσα"
+
+#, c-format
+msgid "transaction not initialized"
+msgstr "διεκπεραίωση μη εκκινηθείσα"
+
+#, c-format
+msgid "duplicate target"
+msgstr "διπλότυπος στόχος"
+
+#, c-format
+msgid "transaction not prepared"
+msgstr "απροετοίμαστη διεκπεραίωση"
+
+#, c-format
+msgid "transaction aborted"
+msgstr "ματαίωση διεκπεραίωσης"
+
+#, c-format
+msgid "operation not compatible with the transaction type"
+msgstr "λειτουργία ασύμβατη με τον τύπο διεκπεραίωσης"
+
+#, c-format
+msgid "transaction commit attempt when database is not locked"
+msgstr "προσπάθεια διεκπεραίωσης σε μη κλειδωμένη βάση"
+
+#, c-format
+msgid "could not find or read package"
+msgstr "αδυναμία εύρεσης ή ανάγνωσης πακέτου"
+
+#, c-format
+msgid "operation cancelled due to ignorepkg"
+msgstr "ακύρωση λειτουργίας λόγω ignorepkg"
+
+#, c-format
+msgid "invalid or corrupted package"
+msgstr "άκυρο ή κατεστραμμένο πακέτο"
+
+#, c-format
+msgid "cannot open package file"
+msgstr "αδυναμία ανοίγματος πακέτου"
+
+#, c-format
+msgid "cannot remove all files for package"
+msgstr "αδυναμία διαγραφής όλων των αρχείων του πακέτου"
+
+#, c-format
+msgid "package filename is not valid"
+msgstr "μη έγκυρο όνομα πακέτου"
+
+#, c-format
+msgid "package architecture is not valid"
+msgstr "μη έγκυρη αρχιτεκτονική πακέτου"
+
+#, c-format
+msgid "could not find repository for target"
+msgstr "αδυναμία εύρεσης αποθήκης για διεκπεραίωση"
+
+#, c-format
+msgid "invalid or corrupted delta"
+msgstr "άκυρο ή κατεστραμμένο delta"
+
+#, c-format
+msgid "delta patch failed"
+msgstr "αποτυχία μπάλωματος delta"
+
+#, c-format
+msgid "could not satisfy dependencies"
+msgstr "αδυναμία επίλυσης εξαρτήσεων"
+
+#, c-format
+msgid "conflicting dependencies"
+msgstr "διένεξη εξαρτήσεων"
+
+#, c-format
+msgid "conflicting files"
+msgstr "διένεξη αρχείων"
+
+#, c-format
+msgid "failed to retrieve some files"
+msgstr "αποτυχία λήψης κάποιων αρχείων"
+
+#, c-format
+msgid "failed to copy some file"
+msgstr "αποτυχία αντιγραφής αρχείου"
+
+#, c-format
+msgid "invalid regular expression"
+msgstr "άκυρη κανονική έκφραση"
+
+#, c-format
+msgid "libarchive error"
+msgstr "σφάλμα libarchive"
+
+#, c-format
+msgid "download library error"
+msgstr "σφάλμα βιβλιοθήκης λήψης"
+
+#, c-format
+msgid "error invoking external downloader"
+msgstr "σφάλμα κλήσης προγράμματος λήψης"
+
+#, c-format
+msgid "unexpected error"
+msgstr "απροσδόκητο σφάλμα"
+
+#, c-format
+msgid "database larger than maximum size\n"
+msgstr "βάση μεγαλύτερη από μέγιστο όριο\n"
+
+#, c-format
+msgid "could not find %s in database -- skipping\n"
+msgstr "δεν βρέθηκε το %s στη βάση -- παράλειψη\n"
+
+#, c-format
+msgid "removing %s from target list\n"
+msgstr "αφαίρεση του %s από λίστα διεκπεραίωσης\n"
+
+#, c-format
+msgid "cannot remove file '%s': %s\n"
+msgstr "αδυναμία διαγραφής αρχείου '%s': %s\n"
+
+#, c-format
+msgid "could not remove database entry %s-%s\n"
+msgstr "αδυναμία διαγραφής εγγραφής βάσης %s-%s\n"
+
+#, c-format
+msgid "could not remove entry '%s' from cache\n"
+msgstr "αδυναμία διαγραφής εγγραφής '%s' από κρύπτη\n"
+
+#, c-format
+msgid "%s: ignoring package upgrade (%s => %s)\n"
+msgstr "%s: παράβλεψη αναβάθμισης πακέτου (%s => %s)\n"
+
+#, c-format
+msgid "%s: ignoring package downgrade (%s => %s)\n"
+msgstr "%s: παράβλεψη υποβάθμισης πακέτου (%s => %s)\n"
+
+#, c-format
+msgid "%s: downgrading from version %s to version %s\n"
+msgstr "%s: υποβάθμιση από έκδοση %s στην έκδοση %s\n"
+
+#, c-format
+msgid "%s: local (%s) is newer than %s (%s)\n"
+msgstr "%s: τοπικό (%s) νεότερο από του [%s] (%s)\n"
+
+#, c-format
+msgid "ignoring package replacement (%s-%s => %s-%s)\n"
+msgstr "παράβλεψη αντικαταστάτη πακέτου (%s-%s => %s-%s)\n"
+
+#, c-format
+msgid "cannot replace %s by %s\n"
+msgstr "αδυναμία αντικατάστασης του %s από το %s\n"
+
+#, c-format
+msgid "unresolvable package conflicts detected\n"
+msgstr "εντοπισμός ανεπίλυτων διενέξεων πακέτων\n"
+
+#, c-format
+msgid "removing '%s' from target list because it conflicts with '%s'\n"
+msgstr ""
+"αφαίρεση του '%s' από την λίστα διεκπεραίωσης λόγω διένεξης με το '%s'\n"
+
+#, c-format
+msgid "failed to retrieve some files from %s\n"
+msgstr "αποτυχία λήψεως κάποιων αρχείων από %s\n"
+
+#, c-format
+msgid "could not commit removal transaction\n"
+msgstr "αδυναμία διεκπεραίωσης διαγραφής\n"
+
+#, c-format
+msgid "could not commit transaction\n"
+msgstr "αδυναμία διεκπεραίωσης\n"
+
+#, c-format
+msgid "%s database version is too old\n"
+msgstr "πολύ παλιά έκδοση βάσης %s\n"
+
+#, c-format
+msgid "could not remove lock file %s\n"
+msgstr "αδυναμία διαγραφής αρχείου κλειδώματος %s\n"
+
+#, c-format
+msgid "could not create temp directory\n"
+msgstr "αδυναμία δημιουργίας προσωρινού καταλόγου\n"
+
+#, c-format
+msgid "could not copy tempfile to %s (%s)\n"
+msgstr "αδυναμία αντιγραφής προσωρινού αρχείου στο %s (%s)\n"
+
+#, c-format
+msgid "could not remove tmpdir %s\n"
+msgstr "αδυναμία διαγραφής προσωρινού καταλόγου %s\n"
+
+#, c-format
+msgid "could not create pipe (%s)\n"
+msgstr "αδυναμία δημιουργίας αγωγού (%s)\n"
+
+#, c-format
+msgid "could not fork a new process (%s)\n"
+msgstr "αποτυχία εκκίνησης νέας διεργασίας (%s)\n"
+
+#, c-format
+msgid "could not change the root directory (%s)\n"
+msgstr "αδυναμία αλλαγής ριζικού καταλόγου (%s)\n"
+
+#, c-format
+msgid "call to execv failed (%s)\n"
+msgstr "αποτυχία κλήσης execv (%s)\n"
+
+#, c-format
+msgid "call to waitpid failed (%s)\n"
+msgstr "αποτυχία κλήσης waitpid (%s)\n"
+
+#, c-format
+msgid "could not open pipe (%s)\n"
+msgstr "αποτυχία ανοίγματος αγωγού (%s)\n"
+
+#, c-format
+msgid "command failed to execute correctly\n"
+msgstr "αποτυχία σωστής εκτέλεσης εντολής\n"
+
+#, c-format
+msgid "no %s cache exists, creating...\n"
+msgstr "δημιουργία κρύπτης %s...\n"
+
+#, c-format
+msgid "couldn't create package cache, using /tmp instead\n"
+msgstr "αδυναμία δημιουργίας κρύπτης πακέτων, χρήση /tmp\n"

lib/libalpm/po/en_GB.po

@@ -1,44 +1,41 @@
-# English (British) translations for Pacman package manager package.
-# Copyright (C) 2007 Judd Vinet <jvinet@zeroflux.org>
-# This file is distributed under the same license as the Pacman package manager package.
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR Pacman Development Team <pacman-dev@archlinux.org>
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
 #
-# Jeff Bailes <thepizzaking@gmail.com>, 2007, 2009.
 msgid ""
 msgstr ""
-"Project-Id-Version: Pacman package manager 3.0.0\n"
-"Report-Msgid-Bugs-To: pacman-dev@archlinux.org\n"
-"POT-Creation-Date: 2009-07-27 21:15-0500\n"
-"PO-Revision-Date: 2009-07-30 18:37+1000\n"
-"Last-Translator: Jeff Bailes <thepizzaking@gmail.com>\n"
-"Language-Team: English <en_gb@li.org>\n"
+"Project-Id-Version: Arch Linux Pacman package manager\n"
+"Report-Msgid-Bugs-To: http://bugs.archlinux.org/index.php?project=3\n"
+"POT-Creation-Date: 2011-03-14 13:51-0500\n"
+"PO-Revision-Date: 2011-03-11 04:03+0000\n"
+"Last-Translator: toofishes <dpmcgee@gmail.com>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: en_GB\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"Plural-Forms: nplurals=2; plural=(n != 1)\n"
 
 #, c-format
-msgid "replacing older version %s-%s by %s in target list\n"
-msgstr "replacing older version %s-%s by %s in target list\n"
+msgid "%s-%s is up to date -- skipping\n"
+msgstr "%s-%s is up to date -- skipping\n"
 
 #, c-format
-msgid "skipping %s-%s because newer version %s is in the target list\n"
-msgstr "skipping %s-%s because newer version %s is in the target list\n"
+msgid "%s-%s is up to date -- reinstalling\n"
+msgstr "%s-%s is up to date -- reinstalling\n"
 
 #, c-format
-msgid "conflicting packages were found in the target list\n"
-msgstr "conflicting packages were found in the target list\n"
+msgid "downgrading package %s (%s => %s)\n"
+msgstr "downgrading package %s (%s => %s)\n"
 
 #, c-format
-msgid "you cannot install two conflicting packages at the same time\n"
-msgstr "you cannot install two conflicting packages at the same time\n"
+msgid "warning given when extracting %s (%s)\n"
+msgstr "warning given when extracting %s (%s)\n"
 
 #, c-format
-msgid "replacing packages with -U is not supported yet\n"
-msgstr "replacing packages with -U is not supported yet\n"
-
-#, c-format
-msgid "you can replace packages manually using -Rd and -U\n"
-msgstr "you can replace packages manually using -Rd and -U\n"
+msgid "could not extract %s (%s)\n"
+msgstr "could not extract %s (%s)\n"
 
 #, c-format
 msgid ""
@@ -56,10 +53,6 @@ msgstr "extract: not overwriting dir with file %s\n"
 msgid "extract: symlink %s does not point to dir\n"
 msgstr "extract: symlink %s does not point to dir\n"
 
-#, c-format
-msgid "could not extract %s (%s)\n"
-msgstr "could not extract %s (%s)\n"
-
 #, c-format
 msgid "could not rename %s to %s (%s)\n"
 msgstr "could not rename %s to %s (%s)\n"
@@ -84,6 +77,10 @@ msgstr "extracting %s as %s.pacnew\n"
 msgid "could not get current working directory\n"
 msgstr "could not get current working directory\n"
 
+#, c-format
+msgid "could not change directory to %s (%s)\n"
+msgstr "could not change directory to %s (%s)\n"
+
 #, c-format
 msgid "problem occurred while upgrading %s\n"
 msgstr "problem occurred while upgrading %s\n"
@@ -101,13 +98,17 @@ msgid "could not add entry '%s' in cache\n"
 msgstr "could not add entry '%s' in cache\n"
 
 #, c-format
-msgid "could not remove database %s\n"
-msgstr "could not remove database %s\n"
+msgid "removing invalid database: %s\n"
+msgstr "removing invalid database: %s\n"
 
 #, c-format
 msgid "invalid name for database entry '%s'\n"
 msgstr "invalid name for database entry '%s'\n"
 
+#, c-format
+msgid "duplicated database entry '%s'\n"
+msgstr "duplicated database entry '%s'\n"
+
 #, c-format
 msgid "corrupted database entry '%s'\n"
 msgstr "corrupted database entry '%s'\n"
@@ -149,8 +150,8 @@ msgid "missing package metadata in %s\n"
 msgstr "missing package metadata in %s\n"
 
 #, c-format
-msgid "attempt to re-register the 'local' DB\n"
-msgstr "attempt to re-register the 'local' DB\n"
+msgid "removing invalid file: %s\n"
+msgstr "removing invalid file: %s\n"
 
 #, c-format
 msgid "database path is undefined\n"
@@ -172,42 +173,58 @@ msgstr "%s will be installed before its %s dependency\n"
 msgid "ignoring package %s-%s\n"
 msgstr "ignoring package %s-%s\n"
 
-#, c-format
-msgid "provider package was selected (%s provides %s)\n"
-msgstr "provider package was selected (%s provides %s)\n"
-
 #, c-format
 msgid "cannot resolve \"%s\", a dependency of \"%s\"\n"
 msgstr "cannot resolve \"%s\", a dependency of \"%s\"\n"
 
 #, c-format
-msgid "url '%s' is invalid\n"
-msgstr "URL '%s' is invalid\n"
+msgid "could not get filesystem information\n"
+msgstr "could not get filesystem information\n"
 
 #, c-format
-msgid "url scheme not specified, assuming HTTP\n"
-msgstr "URL scheme not specified, assuming HTTP\n"
+msgid "could not get filesystem information for %s: %s\n"
+msgstr "could not get filesystem information for %s: %s\n"
+
+#, c-format
+msgid "could not determine mount point for file %s"
+msgstr "could not determine mount point for file %s"
+
+#, c-format
+msgid "could not determine filesystem mount points"
+msgstr "could not determine filesystem mount points"
+
+#, c-format
+msgid "Partition %s is mounted read only\n"
+msgstr "Partition %s is mounted read only\n"
+
+#, c-format
+msgid "Partition %s too full: %ld blocks needed, %ld blocks free\n"
+msgstr "Partition %s too full: %ld blocks needed, %ld blocks free\n"
 
 #, c-format
 msgid "disk"
 msgstr "disk"
 
+#, c-format
+msgid "url '%s' is invalid\n"
+msgstr "URL '%s' is invalid\n"
+
 #, c-format
 msgid "failed retrieving file '%s' from %s : %s\n"
 msgstr "failed retrieving file '%s' from %s : %s\n"
 
 #, c-format
-msgid "cannot resume download, starting over\n"
-msgstr "cannot resume download, starting over\n"
-
-#, c-format
-msgid "cannot write to file '%s'\n"
-msgstr "cannot write to file '%s'\n"
+msgid "resuming download of %s not possible; starting over\n"
+msgstr "resuming download of %s not possible; starting over\n"
 
 #, c-format
 msgid "error writing to file '%s': %s\n"
 msgstr "error writing to file '%s': %s\n"
 
+#, c-format
+msgid "failed retrieving file '%s' from %s\n"
+msgstr "failed retrieving file '%s' from %s\n"
+
 #, c-format
 msgid "%s appears to be truncated: %jd/%jd bytes\n"
 msgstr "%s appears to be truncated: %jd/%jd bytes\n"
@@ -240,6 +257,10 @@ msgstr "could not find or read directory"
 msgid "wrong or NULL argument passed"
 msgstr "wrong or NULL argument passed"
 
+#, c-format
+msgid "not enough free disk space"
+msgstr "not enough free disk space"
+
 #, c-format
 msgid "library not initialized"
 msgstr "library not initialised"
@@ -272,6 +293,10 @@ msgstr "database already registered"
 msgid "could not find database"
 msgstr "could not find database"
 
+#, c-format
+msgid "database is incorrect version"
+msgstr "database is incorrect version"
+
 #, c-format
 msgid "could not update database"
 msgstr "could not update database"
@@ -341,8 +366,12 @@ msgid "package filename is not valid"
 msgstr "package filename is not valid"
 
 #, c-format
-msgid "no such repository"
-msgstr "no such repository"
+msgid "package architecture is not valid"
+msgstr "package architecture is not valid"
+
+#, c-format
+msgid "could not find repository for target"
+msgstr "could not find repository for target"
 
 #, c-format
 msgid "invalid or corrupted delta"
@@ -368,6 +397,10 @@ msgstr "conflicting files"
 msgid "failed to retrieve some files"
 msgstr "failed to retrieve some files"
 
+#, c-format
+msgid "failed to copy some file"
+msgstr "failed to copy some file"
+
 #, c-format
 msgid "invalid regular expression"
 msgstr "invalid regular expression"
@@ -388,10 +421,18 @@ msgstr "error invoking external downloader"
 msgid "unexpected error"
 msgstr "unexpected error"
 
+#, c-format
+msgid "database larger than maximum size\n"
+msgstr "database larger than maximum size\n"
+
 #, c-format
 msgid "could not find %s in database -- skipping\n"
 msgstr "could not find %s in database -- skipping\n"
 
+#, c-format
+msgid "removing %s from target list\n"
+msgstr "removing %s from target list\n"
+
 #, c-format
 msgid "cannot remove file '%s': %s\n"
 msgstr "cannot remove file '%s': %s\n"
@@ -428,22 +469,6 @@ msgstr "ignoring package replacement (%s-%s => %s-%s)\n"
 msgid "cannot replace %s by %s\n"
 msgstr "cannot replace %s by %s\n"
 
-#, c-format
-msgid "repository '%s' not found\n"
-msgstr "repository '%s' not found\n"
-
-#, c-format
-msgid "%s-%s is up to date -- skipping\n"
-msgstr "%s-%s is up to date -- skipping\n"
-
-#, c-format
-msgid "%s-%s is up to date -- reinstalling\n"
-msgstr "%s-%s is up to date -- reinstalling\n"
-
-#, c-format
-msgid "downgrading package %s (%s => %s)\n"
-msgstr "downgrading package %s (%s => %s)\n"
-
 #, c-format
 msgid "unresolvable package conflicts detected\n"
 msgstr "unresolvable package conflicts detected\n"
@@ -456,26 +481,6 @@ msgstr "removing '%s' from target list because it conflicts with '%s'\n"
 msgid "failed to retrieve some files from %s\n"
 msgstr "failed to retrieve some files from %s\n"
 
-#, c-format
-msgid "could not create removal transaction\n"
-msgstr "could not create removal transaction\n"
-
-#, c-format
-msgid "could not create transaction\n"
-msgstr "could not create transaction\n"
-
-#, c-format
-msgid "could not initialize the removal transaction\n"
-msgstr "could not initialise the removal transaction\n"
-
-#, c-format
-msgid "could not initialize transaction\n"
-msgstr "could not initialise transaction\n"
-
-#, c-format
-msgid "could not prepare removal transaction\n"
-msgstr "could not prepare removal transaction\n"
-
 #, c-format
 msgid "could not commit removal transaction\n"
 msgstr "could not commit removal transaction\n"
@@ -484,6 +489,10 @@ msgstr "could not commit removal transaction\n"
 msgid "could not commit transaction\n"
 msgstr "could not commit transaction\n"
 
+#, c-format
+msgid "%s database version is too old\n"
+msgstr "%s database version is too old\n"
+
 #, c-format
 msgid "could not remove lock file %s\n"
 msgstr "could not remove lock file %s\n"
@@ -501,12 +510,8 @@ msgid "could not remove tmpdir %s\n"
 msgstr "could not remove tmpdir %s\n"
 
 #, c-format
-msgid "could not open %s: %s\n"
-msgstr "could not open %s: %s\n"
-
-#, c-format
-msgid "could not change directory to %s (%s)\n"
-msgstr "could not change directory to %s (%s)\n"
+msgid "could not create pipe (%s)\n"
+msgstr "could not create pipe (%s)\n"
 
 #, c-format
 msgid "could not fork a new process (%s)\n"
@@ -517,17 +522,17 @@ msgid "could not change the root directory (%s)\n"
 msgstr "could not change the root directory (%s)\n"
 
 #, c-format
-msgid "could not change directory to / (%s)\n"
-msgstr "could not change directory to / (%s)\n"
-
-#, c-format
-msgid "call to popen failed (%s)"
-msgstr "call to popen failed (%s)"
+msgid "call to execv failed (%s)\n"
+msgstr "call to execv failed (%s)\n"
 
 #, c-format
 msgid "call to waitpid failed (%s)\n"
 msgstr "call to waitpid failed (%s)\n"
 
+#, c-format
+msgid "could not open pipe (%s)\n"
+msgstr "could not open pipe (%s)\n"
+
 #, c-format
 msgid "command failed to execute correctly\n"
 msgstr "command failed to execute correctly\n"
@@ -539,48 +544,3 @@ msgstr "no %s cache exists, creating...\n"
 #, c-format
 msgid "couldn't create package cache, using /tmp instead\n"
 msgstr "couldn't create package cache, using /tmp instead\n"
-
-#~ msgid "error downloading '%s': %s\n"
-#~ msgstr "error downloading '%s': %s\n"
-
-#~ msgid "could not chdir to %s\n"
-#~ msgstr "could not chdir to %s\n"
-
-#~ msgid "running XferCommand: fork failed!\n"
-#~ msgstr "running XferCommand: fork failed!\n"
-
-#~ msgid "could not commit transaction"
-#~ msgstr "could not commit transaction"
-
-#~ msgid "could not download all files"
-#~ msgstr "could not download all files"
-
-#~ msgid "cannot load package data"
-#~ msgstr "cannot load package data"
-
-#~ msgid "package not installed or lesser version"
-#~ msgstr "package not installed or lesser version"
-
-#~ msgid "group not found"
-#~ msgstr "group not found"
-
-#~ msgid "user aborted the operation"
-#~ msgstr "user aborted the operation"
-
-#~ msgid "internal error"
-#~ msgstr "internal error"
-
-#~ msgid "not confirmed"
-#~ msgstr "not confirmed"
-
-#~ msgid "%s-%s: ignoring package upgrade (to be replaced by %s-%s)\n"
-#~ msgstr "%s-%s: ignoring package upgrade (to be replaced by %s-%s)\n"
-
-#~ msgid "command: %s\n"
-#~ msgstr "command: %s\n"
-
-#~ msgid "could not prepare transaction\n"
-#~ msgstr "could not prepare transaction\n"
-
-#~ msgid "No /bin/sh in parent environment, aborting scriptlet\n"
-#~ msgstr "No /bin/sh in parent environment, aborting scriptlet\n"