set repo topics on migrate

Co-authored-by: Artoo <artoo@artixlinux.org>
Reviewed-on: artix/artools#76

.gitignore

@@ -6,3 +6,9 @@ data/schemas/*.conf
 .project
 iso-profiles
 live-services
+artixpkg_cmds
+PKGBUILD
+
+contrib/artixlinux
+build/
+tmp/

LICENSE

@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<https://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<https://www.gnu.org/licenses/why-not-lgpl.html>.

Makefile

@@ -1,188 +1,175 @@
-VERSION=0.11
+SHELL=/bin/bash
 
-CHROOT_VERSION=0.9
+V=0.31
+BUILDTOOLVER ?= $(V)
+
+CHROOTVER=0.11
 
 TOOLS = artools
-PREFIX ?= /usr/local
 SYSCONFDIR = /etc
-BINDIR = $(PREFIX)/bin
-LIBDIR = $(PREFIX)/lib
-DATADIR = $(PREFIX)/share
-CPIODIR = $(SYSCONFDIR)/initcpio
+PREFIX = /usr/local
+LIBDIR = $(PREFIX)/share/$(TOOLS)/lib
+DATADIR = $(PREFIX)/share/$(TOOLS)
+BUILDDIR = build
 
-SYSCONF = \
-	data/artools.conf
+rwildcard=$(foreach d,$(wildcard $(1:=/*)),$(call rwildcard,$d,$2) $(filter $(subst *,%,$2),$d))
 
-BIN_BASE = \
-	bin/mkchroot \
-	bin/basestrap \
-	bin/artools-chroot \
-	bin/fstabgen \
-	bin/signfile \
-	bin/chroot-run
+BINPROGS_SRC_BASE = $(wildcard src/base/*.in)
+BINPROGS_BASE = $(addprefix $(BUILDDIR)/,$(patsubst src/base/%,bin/%,$(patsubst %.in,%,$(BINPROGS_SRC_BASE))))
+BINPROGS_SRC_PKG = $(wildcard src/pkg/*.in)
+BINPROGS_PKG = $(addprefix $(BUILDDIR)/,$(patsubst src/pkg/%,bin/%,$(patsubst %.in,%,$(BINPROGS_SRC_PKG))))
+BINPROGS_SRC_ISO = $(wildcard src/iso/*.in)
+BINPROGS_ISO = $(addprefix $(BUILDDIR)/,$(patsubst src/iso/%,bin/%,$(patsubst %.in,%,$(BINPROGS_SRC_ISO))))
 
-LIBS_BASE = \
-	lib/util.sh \
-	lib/util-msg.sh \
-	lib/util-mount.sh \
-	lib/util-chroot.sh \
-	lib/util-fstab.sh
+LIBRARY_SRC_BASE = $(call rwildcard,src/lib/base,*.sh)
+LIBRARY_BASE = $(addprefix $(BUILDDIR)/,$(patsubst src/%,%,$(patsubst %.in,%,$(LIBRARY_SRC_BASE))))
+LIBRARY_SRC_PKG = $(call rwildcard,src/lib/pkg,*.sh)
+LIBRARY_PKG = $(addprefix $(BUILDDIR)/,$(patsubst src/%,%,$(patsubst %.in,%,$(LIBRARY_SRC_PKG))))
+LIBRARY_SRC_ISO = $(call rwildcard,src/lib/iso,*.sh)
+LIBRARY_ISO = $(addprefix $(BUILDDIR)/,$(patsubst src/%,%,$(patsubst %.in,%,$(LIBRARY_SRC_ISO))))
 
-SHARED_BASE = \
-	$(wildcard data/pacman*.conf)
+MAKEPKG_CONFIGS=$(wildcard config/makepkg/*)
+PACMAN_CONFIGS=$(wildcard config/pacman/*)
+SETARCH_ALIASES = $(wildcard config/setarch-aliases.d/*)
 
-BIN_PKG = \
-	bin/checkpkg \
-	bin/lddd \
-	bin/finddeps \
-	bin/find-libdeps \
-	bin/mkchrootpkg \
-	bin/buildpkg \
-	bin/buildtree \
-	bin/deploypkg \
-	bin/commitpkg \
-	bin/comparepkg \
-	bin/pkg2yaml
+TOOLS_CONFIGS_BASE=$(wildcard config/conf/*base*)
+TOOLS_CONFIGS_PKG=$(wildcard config/conf/*pkg*)
+TOOLS_CONFIGS_ISO=$(wildcard config/conf/*iso*)
 
-LIBS_PKG = \
-	$(wildcard lib/util-pkg*.sh)
-
-SHARED_PKG = \
-	data/makepkg.conf
-
-PATCHES = \
-	$(wildcard data/patches/*.patch)
-
-COMMITPKG_SYMS = \
-	extrapkg \
-	corepkg \
-	testingpkg \
-	stagingpkg \
-	communitypkg \
-	community-testingpkg \
-	community-stagingpkg \
-	multilibpkg \
-	multilib-testingpkg \
-	multilib-stagingpkg \
-	kde-unstablepkg \
-	gnome-unstablepkg
-
-BUILDPKG_SYMS = \
+LN_BUILDPKG = \
 	buildpkg-system \
+	buildpkg-system-gremlins \
+	buildpkg-system-goblins \
 	buildpkg-world \
-	buildpkg-gremlins \
-	buildpkg-goblins \
-	buildpkg-galaxy \
-	buildpkg-galaxy-gremlins \
-	buildpkg-galaxy-goblins \
+	buildpkg-world-gremlins \
+	buildpkg-world-goblins \
 	buildpkg-lib32 \
 	buildpkg-lib32-gremlins \
 	buildpkg-lib32-goblins \
-	buildpkg-kde-wobble \
-	buildpkg-gnome-wobble
+	buildpkg-galaxy \
+	buildpkg-galaxy-gremlins \
+	buildpkg-galaxy-goblins
 
-DEPLOYPKG_SYMS = \
-	deploypkg-system \
-	deploypkg-world \
-	deploypkg-gremlins \
-	deploypkg-goblins \
-	deploypkg-galaxy \
-	deploypkg-galaxy-gremlins \
-	deploypkg-galaxy-goblins \
-	deploypkg-lib32 \
-	deploypkg-lib32-gremlins \
-	deploypkg-lib32-goblins \
-	deploypkg-kde-wobble \
-	deploypkg-gnome-wobble
-
-BIN_ISO = \
-	bin/buildiso \
-	bin/deployiso
-
-BUILDISO_SYMS = \
+LN_BUILDISO = \
 	buildiso-gremlins \
 	buildiso-goblins
 
-LIBS_ISO = \
-	$(wildcard lib/util-iso*.sh)
+all: binprogs_base binprogs_pkg binprogs_iso library_base library_pkg library_iso conf_base conf_pkg conf_iso
+binprogs_base: $(BINPROGS_BASE)
+binprogs_pkg: $(BINPROGS_PKG)
+binprogs_iso: $(BINPROGS_ISO)
+library_base: $(LIBRARY_BASE)
+library_pkg: $(LIBRARY_PKG)
+library_iso: $(LIBRARY_ISO)
 
-SHARED_ISO = \
-	data/mkinitcpio.conf
+edit = sed -e "s|@datadir[@]|$(DATADIR)|g" \
+	-e "s|@libdir[@]|$(LIBDIR)|g" \
+	-e "s|@sysconfdir[@]|$(SYSCONFDIR)|g" \
+	-e "s|@buildtool[@]|$(TOOLS)|g" \
+	-e "s|@buildtoolver[@]|$(BUILDTOOLVER)|g" \
+	-e "s|@chrootver[@]|$(CHROOTVER)|g"
 
-DIRMODE = -dm0755
-FILEMODE = -m0644
-MODE =  -m0755
+GEN_MSG = @echo "GEN $(patsubst $(BUILDDIR)/%,%,$@)"
 
-LN = ln -sf
 RM = rm -f
-M4 = m4 -P
-CHMODAW = chmod a-w
-CHMODX = chmod +x
 
-all: $(BIN_BASE) $(BIN_PKG) $(BIN_ISO)
+define buildInScript
+$(1)/%: $(2)%$(3)
+	$$(GEN_MSG)
+	@mkdir -p $$(dir $$@)
+	@$(RM) "$$@"
+	@cat $$< | $(edit) >$$@
+	@chmod $(4) "$$@"
+	@bash -O extglob -n "$$@"
+endef
 
-EDIT = sed -e "s|@datadir[@]|$(DATADIR)/$(TOOLS)|g" \
-	-e "s|@sysconfdir[@]|$(SYSCONFDIR)/$(TOOLS)|g" \
-	-e "s|@libdir[@]|$(LIBDIR)/$(TOOLS)|g" \
-	-e "s|@version@|$(VERSION)|" \
-	-e "s|@chroot_version@|$(CHROOT_VERSION)|"
+$(eval $(call buildInScript,build/bin,src/base/,.in,755))
+$(eval $(call buildInScript,build/bin,src/pkg/,.in,755))
+$(eval $(call buildInScript,build/bin,src/iso/,.in,755))
+$(eval $(call buildInScript,build/lib,src/lib/,,644))
 
-%: %.in Makefile
-	@echo "GEN $@"
-	@$(RM) "$@"
-	@$(M4) $@.in | $(EDIT) >$@
-	@$(CHMODAW) "$@"
-	@$(CHMODX) "$@"
+conf_base:
+	@install -d $(BUILDDIR)/pacman.conf.d $(BUILDDIR)/artools
+	@cp -a $(PACMAN_CONFIGS) $(BUILDDIR)/pacman.conf.d
+	@cp -a $(TOOLS_CONFIGS_BASE) $(BUILDDIR)/artools
+
+conf_pkg:
+	@install -d $(BUILDDIR)/makepkg.conf.d $(BUILDDIR)/artools
+	@cp -a $(MAKEPKG_CONFIGS) $(BUILDDIR)/makepkg.conf.d
+	@cp -a $(TOOLS_CONFIGS_PKG) $(BUILDDIR)/artools
+
+conf_iso:
+	@install -d $(BUILDDIR)/artools
+	@cp -a $(TOOLS_CONFIGS_ISO) $(BUILDDIR)/artools
 
 clean:
-	$(RM) $(BIN_BASE) $(BIN_PKG) $(BIN_ISO)
+	rm -rf $(BUILDDIR)
 
-install_base:
-	install $(DIRMODE) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
-	install $(FILEMODE) $(SYSCONF) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
+install_base: binprogs_base
+	install -dm0755 $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
+	install -dm0755 $(DESTDIR)$(PREFIX)/bin
+	install -dm0755 $(DESTDIR)$(DATADIR)/pacman.conf.d
+	install -m0755 $(BINPROGS_BASE) $(DESTDIR)$(PREFIX)/bin
+	install -dm0755 $(DESTDIR)$(LIBDIR)
+	cp -ra $(BUILDDIR)/lib/base $(DESTDIR)$(LIBDIR)
 
-	install $(DIRMODE) $(DESTDIR)$(BINDIR)
-	install $(MODE) $(BIN_BASE) $(DESTDIR)$(BINDIR)
+	for conf in $(notdir $(TOOLS_CONFIGS_BASE)); do install -Dm0644 $(BUILDDIR)/$(TOOLS)/$$conf $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)/$${conf##*/}; done
 
-	install $(DIRMODE) $(DESTDIR)$(LIBDIR)/$(TOOLS)
-	install $(FILEMODE) $(LIBS_BASE) $(DESTDIR)$(LIBDIR)/$(TOOLS)
+	for conf in $(notdir $(PACMAN_CONFIGS)); do install -Dm0644 $(BUILDDIR)/pacman.conf.d/$$conf $(DESTDIR)$(DATADIR)/pacman.conf.d/$${conf##*/}; done
 
-	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)
-	install $(FILEMODE) $(SHARED_BASE) $(DESTDIR)$(DATADIR)/$(TOOLS)
+install_pkg: binprogs_pkg
+	install -dm0755 $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
+	install -dm0755 $(DESTDIR)$(PREFIX)/bin
+	install -dm0755 $(DESTDIR)$(DATADIR)/setarch-aliases.d
+	install -dm0755 $(DESTDIR)$(DATADIR)/makepkg.conf.d
+	install -m0755 $(BINPROGS_PKG) $(DESTDIR)$(PREFIX)/bin
+	install -dm0755 $(DESTDIR)$(LIBDIR)
+	cp -ra $(BUILDDIR)/lib/pkg $(DESTDIR)$(LIBDIR)
 
-install_pkg:
-	install $(DIRMODE) $(DESTDIR)$(BINDIR)
-	install $(MODE) $(BIN_PKG) $(DESTDIR)$(BINDIR)
+	for conf in $(notdir $(TOOLS_CONFIGS_PKG)); do install -Dm0644 $(BUILDDIR)/$(TOOLS)/$$conf $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)/$${conf##*/}; done
 
-	$(LN) find-libdeps $(DESTDIR)$(BINDIR)/find-libprovides
+	for conf in $(notdir $(MAKEPKG_CONFIGS)); do install -Dm0644 $(BUILDDIR)/makepkg.conf.d/$$conf $(DESTDIR)$(DATADIR)/makepkg.conf.d/$${conf##*/}; done
+	for a in $(SETARCH_ALIASES); do install -m0644 $$a -t $(DESTDIR)$(DATADIR)/setarch-aliases.d; done
+	for l in $(LN_BUILDPKG); do ln -sf buildpkg $(DESTDIR)$(PREFIX)/bin/$$l; done
+	ln -sf find-libdeps $(DESTDIR)$(PREFIX)/bin/find-libprovides
 
-	for l in $(COMMITPKG_SYMS); do $(LN) commitpkg $(DESTDIR)$(BINDIR)/$$l; done
-	for l in $(BUILDPKG_SYMS); do $(LN) buildpkg $(DESTDIR)$(BINDIR)/$$l; done
-	for l in $(DEPLOYPKG_SYMS); do $(LN) deploypkg $(DESTDIR)$(BINDIR)/$$l; done
+install_iso: binprogs_iso
+	install -dm0755 $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
+	install -dm0755 $(DESTDIR)$(PREFIX)/bin
+	install -m0755 $(BINPROGS_ISO) $(DESTDIR)$(PREFIX)/bin
+	install -dm0755 $(DESTDIR)$(LIBDIR)
+	cp -ra $(BUILDDIR)/lib/iso $(DESTDIR)$(LIBDIR)
 
-	install $(DIRMODE) $(DESTDIR)$(LIBDIR)/$(TOOLS)
-	install $(FILEMODE) $(LIBS_PKG) $(DESTDIR)$(LIBDIR)/$(TOOLS)
+	for conf in $(notdir $(TOOLS_CONFIGS_ISO)); do install -Dm0644 $(BUILDDIR)/$(TOOLS)/$$conf $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)/$${conf##*/}; done
 
-	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)
-	install $(FILEMODE) $(SHARED_PKG) $(DESTDIR)$(DATADIR)/$(TOOLS)
+	for l in $(LN_BUILDISO); do ln -sf buildiso $(DESTDIR)$(PREFIX)/bin/$$l; done
 
-	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)/patches
-	install $(FILEMODE) $(PATCHES) $(DESTDIR)$(DATADIR)/$(TOOLS)/patches
-install_cpio:
-	+make CPIODIR=$(CPIODIR) DESTDIR=$(DESTDIR) -C initcpio install
+install: all install_base install_pkg install_iso
 
-install_iso: install_cpio
-	install $(DIRMODE) $(DESTDIR)$(BINDIR)
-	install $(MODE) $(BIN_ISO) $(DESTDIR)$(BINDIR)
+uninstall:
+	for f in $(notdir $(BINPROGS)); do rm -f $(DESTDIR)$(PREFIX)/bin/$$f; done
+	for f in $(notdir $(LIBRARY)); do rm -f $(DESTDIR)$(DATADIR)/lib/$$f; done
+	rm -rf $(DESTDIR)$(DATADIR)/lib
+	for conf in $(notdir $(TOOLS_CONFIGS)); do rm -f $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)/$${conf##*/}; done
+	for conf in $(notdir $(MAKEPKG_CONFIGS)); do rm -f $(DESTDIR)$(DATADIR)/makepkg.conf.d/$${conf##*/}; done
+	for conf in $(notdir $(PACMAN_CONFIGS)); do rm -f $(DESTDIR)$(DATADIR)/pacman.conf.d/$${conf##*/}; done
+	for f in $(notdir $(SETARCH_ALIASES)); do rm -f $(DESTDIR)$(DATADIR)/setarch-aliases.d/$$f; done
+	for l in $(LN_BUILDPKG); do rm -f $(DESTDIR)$(PREFIX)/bin/$$l; done
+	for l in $(LN_BUILDISO); do rm -f $(DESTDIR)$(PREFIX)/bin/$$l; done
+	rm -f $(DESTDIR)$(PREFIX)/bin/find-libprovides
+	rmdir --ignore-fail-on-non-empty \
+		$(DESTDIR)$(DATADIR)/setarch-aliases.d \
+		$(DESTDIR)$(DATADIR)/makepkg.conf.d \
+		$(DESTDIR)$(DATADIR)/pacman.conf.d \
+		$(DESTDIR)$(DATADIR) \
+		$(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
 
-	for l in $(BUILDISO_SYMS); do $(LN) buildiso $(DESTDIR)$(BINDIR)/$$l; done
+dist:
+	git archive --format=tar --prefix=$(TOOLS)-$(V)/ v$(V) | gzip > $(TOOLS)-$(V).tar.gz
+	gpg --detach-sign --use-agent $(TOOLS)-$(V).tar.gz
 
-	install $(DIRMODE) $(DESTDIR)$(LIBDIR)/$(TOOLS)
-	install $(FILEMODE) $(LIBS_ISO) $(DESTDIR)$(LIBDIR)/$(TOOLS)
+check: $(BINPROGS_SRC_BASE) $(BINPROGS_SRC_PKG) $(BINPROGS_SRC_ISO) config/makepkg/x86_64.conf contrib/makepkg/PKGBUILD.proto
+	shellcheck -x $^
 
-	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)
-	install $(FILEMODE) $(SHARED_ISO) $(DESTDIR)$(DATADIR)/$(TOOLS)
-
-install: install_base install_pkg install_iso
-
-.PHONY: all clean install
+.PHONY: all binprogs_base binprogs_pkg binprogs_iso library_base library_pkg library_iso conf_base conf_pkg conf_iso clean install install_base install_pkg install_iso uninstall dist check
+.DELETE_ON_ERROR:

README.md

@@ -4,7 +4,7 @@ artools
 #### Make flags
 
 
-* PREFIX=/usr/local (default if defined)
+* PREFIX=/usr
 * SYSCONFDIR=/etc
 
 #### Dependencies
@@ -12,41 +12,55 @@ artools
 ##### Buildtime:
 
 * make
-* git
-* m4
+* shellcheck
 
 ##### Runtime:
 
 - base:
-  * openssh
-  * rsync
-  * haveged
-  * os-prober
-  * gnupg
+  * awk
+  * bash
+  * coreutils
+  * grep
   * pacman
+  * util-linux
+  * sed
 
 - pkg:
-  * namcap
-  * git-subrepo
+  * artools-base
+  * binutils
+  * diffutils
+  * findutils
+  * go-yq
+  * openssh
+  * parallel
+  * rsync
 
 - iso:
+  * artools-base
   * dosfstools
-  * libisoburn
-  * squashfs-tools
-  * mkinitcpio
+  * e2fsprogs
+  * findutils
   * grub
+  * libarchive
+  * libisoburn
+  * mtools
+  * squashfs-tools
+
 
 #### Configuration
 
-artools.conf is the central configuration file for artools.
-By default, the config is installed in
+artools-{base,pkg,iso}.conf are the configuration files for artools.
+By default, the config files are installed in
 
-    /etc/artools/artools.conf
+```bash
+/etc/artools/artools-{base,pkg,iso}.conf
+```
 
-A user artools.conf can be placed in
-
-    $HOME/.config/artools/artools.conf
+A user artools-{base,pkg,iso}.conf can be placed in
 
+```bash
+$HOME/.config/artools/artools-{base,pkg,iso}.conf
+```
 
 If the userconfig is present, artools will load the userconfig values, however, if variables have been set in the systemwide
 
@@ -54,13 +68,31 @@ These values take precedence over the userconfig.
 Best practise is to leave systemwide file untouched.
 By default it is commented and shows just initialization values done in code.
 
-Tools configuration is done in artools.conf or by args.
-Specifying args will override artools.conf settings.
+Tools configuration is done in artools-{base,pkg,iso}.conf or by args.
+Specifying args will override artools-{base,pkg,iso}.conf settings.
 
 Both, pacman.conf and makepkg.conf for chroots are loaded from
 
-    /usr/share/artools/{makepkg,pacman-*}.conf
+```bash
+usr/share/artools/makepkg.conf.d/makepkg.conf
+```
+
+```bash
+usr/share/artools/pacmanconf.d/${repo}.conf
+```
 
 and can be overridden dropping them in
 
-    $HOME/.config/artools/
+```bash
+$HOME/.config/artools/makepkg.conf.d/
+```
+
+```bash
+$HOME/.config/artools/pacman.conf.d/
+```
+
+artools-*.conf:
+
+```bash
+$HOME/.config/artools/
+```

bin/artools-chroot.in

@@ -1,104 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-VERSION=@version@
-
-shopt -s extglob
-
-LIBDIR='@libdir@'
-SYSCONFDIR='@sysconfdir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-import ${LIBDIR}/util.sh
-import ${LIBDIR}/util-mount.sh
-
-select_os(){
-    local os_list=( $(detect) ) count=${#os_list[@]}
-    if [[ ${count} > 1 ]];then
-        msg "Detected systems:"
-        local i=0
-        for os in ${os_list[@]};do
-            local last=${os##*:}
-            case $last in
-                'efi') count=$((count-1)) ;;
-                *) info "$i) $(get_os_name $os)"; i=$((i+1)) ;;
-            esac
-        done
-        i=0
-        msg "Select system to mount [0-%s] : " "$((count-1))"
-        read select
-    else
-        select=0
-    fi
-    local os_str=${os_list[$select]} type
-    type=$os_str
-    root=${os_str%%:*}
-    type=${type##*:}
-    if [[ "${type##*:}" == 'linux' ]];then
-        msg "Mounting (%s) [%s]" "$(get_os_name $os_str)" "$root"
-        mount_os "$1" "$root"
-    else
-        die "You can't mount %s!" "$select"
-    fi
-}
-
-load_user_info
-
-load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-
-automount=false
-
-usage() {
-    echo "usage: ${0##*/} -a [or] ${0##*/} chroot-dir [command]"
-    echo '    -a             Automount detected linux system'
-    echo '    -h             Print this help message'
-    echo ''
-    echo "    If 'command' is unspecified, ${0##*/} will launch /bin/sh."
-    echo ''
-    echo "    If 'automount' is true, ${0##*/} will launch /bin/bash"
-    echo "    and ${chrootdir}."
-    echo ''
-    echo ''
-    exit $1
-}
-
-orig_argv=("$0" "$@")
-
-opts=':ha'
-
-while getopts ${opts} arg; do
-    case "${arg}" in
-        a) automount=true ;;
-        h|?) usage 0 ;;
-        *) echo "invalid argument ${arg}"; usage 1 ;;
-    esac
-done
-shift $(( OPTIND - 1 ))
-
-check_root
-
-if ${automount};then
-    chrootdir=/mnt
-    run_args=/bin/bash
-
-    select_os "${chrootdir}"
-else
-    chrootdir=$1
-    shift
-    run_args="$@"
-
-    [[ -d ${chrootdir} ]] || die "Can't create chroot on non-directory %s" "${chrootdir}"
-
-    chroot_api_mount "${chrootdir}" || die "failed to setup API filesystems in chroot %s" "${chrootdir}"
-    chroot_add_resolv_conf "${chrootdir}"
-fi
-
-SHELL=/bin/sh unshare --fork --pid chroot "${chrootdir}" ${run_args[*]}

bin/basestrap.in

@@ -1,112 +0,0 @@
-#!/bin/bash
-
-#
-# Assumptions:
-#  1) User has partitioned, formatted, and mounted partitions on /mnt
-#  2) Network is functional
-#  3) Arguments passed to the script are valid pacman targets
-#  4) A valid mirror appears in /etc/pacman.d/mirrorlist
-#
-
-VERSION=@version@
-
-shopt -s extglob
-
-DATADIR='@datadir@'
-LIBDIR='@libdir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-import ${LIBDIR}/util.sh
-import ${LIBDIR}/util-mount.sh
-import ${LIBDIR}/util-chroot.sh
-
-copy_mirrorlist(){
-    cp -a /etc/pacman.d/mirrorlist "$1/etc/pacman.d/"
-}
-
-copy_keyring(){
-    if [[ -d /etc/pacman.d/gnupg ]] && [[ ! -d $1/etc/pacman.d/gnupg ]]; then
-        cp -a /etc/pacman.d/gnupg "$1/etc/pacman.d/"
-    fi
-}
-
-create_min_fs(){
-    msg "Creating install root at %s" "$1"
-    mkdir -m 0755 -p $1/var/{cache/pacman/pkg,lib/pacman,log} $1/{dev,etc}
-    mkdir -m 1777 -p $1/{tmp,run}
-    mkdir -m 0555 -p $1/{sys,proc}
-}
-
-newroot=/mnt
-
-hostcache=false
-copykeyring=true
-copymirrorlist=true
-directory=false
-interactive=false
-
-usage() {
-    echo "usage: ${0##*/} [options] root [packages...]"
-    echo " -C <config>      Use an alternate config file for pacman"
-    echo " -c               Use the package cache on the host, rather than the target"
-    echo " -G               Avoid copying the host's pacman keyring to the target"
-    echo " -i               Avoid auto-confirmation of package selections"
-    echo " -M               Avoid copying the host's mirrorlist to the target"
-    echo " -h               Print this help message"
-    echo ''
-    echo ' basestrap installs packages to the specified new root directory.'
-    echo ' If no packages are given, basestrap defaults to the "base" group.'
-    echo ''
-    echo ''
-    exit $1
-}
-
-orig_argv=("$0" "$@")
-
-opts=':C:cGiM'
-
-while getopts ${opts} arg; do
-    case "${arg}" in
-        C) pacman_conf=$OPTARG ;;
-        c) hostcache=true ;;
-        i) interactive=true ;;
-        G) copykeyring=false ;;
-        M) copymirrorlist=false ;;
-        :) echo "invalid argument ${arg}:$OPTARG"; usage 1;;
-        ?) usage 0 ;;
-    esac
-done
-shift $(( OPTIND - 1 ))
-
-check_root
-
-(( $# )) || die "No root directory specified"
-newroot=$1; shift
-pacman_args=("${@:-base}")
-
-${hostcache} || pacman_args+=(--cachedir="$newroot/var/cache/pacman/pkg")
-
-${interactive} || pacman_args+=(--noconfirm)
-
-[[ -n $pacman_conf ]] && pacman_args+=(--config="$pacman_conf")
-
-[[ -d $newroot ]] || die "%s is not a directory" "$newroot"
-
-# create obligatory directories
-create_min_fs "$newroot"
-
-# mount API filesystems
-chroot_api_mount "$newroot" || die "failed to setup API filesystems in new root"
-
-msg2 'Installing packages to %s' "$newroot"
-if ! pacman -r "$newroot" -Sy "${pacman_args[@]}"; then
-    die 'Failed to install packages to new root'
-fi
-
-if ${copykeyring};then
-    copy_keyring "$newroot"
-fi
-
-if ${copymirrorlist};then
-    copy_mirrorlist "$newroot"
-fi

bin/buildiso.in

@@ -1,172 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-VERSION=@version@
-
-LIBDIR='@libdir@'
-DATADIR='@datadir@'
-SYSCONFDIR='@sysconfdir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-import ${LIBDIR}/util.sh
-import ${LIBDIR}/util-iso.sh
-
-prepare_build(){
-    timer_start=$(get_timer)
-
-    load_profile "${PROFILE}"
-
-    local pacman_conf pac_file="pacman-default.conf"
-
-    case "${REPOSITORY}" in
-        'gremlins'|'goblins') pac_file="pacman-${REPOSITORY}.conf" ;;
-    esac
-
-    pacman_conf="${DATADIR}/$pac_file"
-    [[ -f $AT_USERCONFDIR/$pac_file ]] && pacman_conf="$AT_USERCONFDIR/$pac_file"
-
-    iso_file=$(gen_iso_fn).iso
-
-    iso_label="ARTIX_$(date +%Y%m)"
-
-    mkchroot_args+=(-C ${pacman_conf} -m)
-    work_dir=${CHROOTS_ISO}/${PROFILE}/${ARCH}
-
-    iso_dir="${ISO_POOL}/${PROFILE}"
-
-    iso_root=${CHROOTS_ISO}/${PROFILE}/iso
-    mnt_dir=${CHROOTS_ISO}/${PROFILE}/mnt
-    prepare_dir "${mnt_dir}"
-    prepare_dir "${iso_dir}"
-    prepare_dir "${iso_root}"
-}
-
-display_settings(){
-    msg "OPTIONS:"
-    msg2 "PROFILE: %s" "${PROFILE}"
-    msg2 "INITSYS: %s" "${INITSYS}"
-    [[ -n ${GPG_KEY} ]] && msg2 "GPG_KEY: %s" "${GPG_KEY}"
-
-    msg "ISO SETTINGS:"
-    msg2 "ISO_VERSION: %s" "${ISO_VERSION}"
-
-    msg "BUILD:"
-    show_profile
-}
-
-build(){
-    msg "Start building [%s]" "${PROFILE}"
-    if ${clean_first};then
-        for copy in "${work_dir}"/*; do
-            [[ -d $copy ]] || continue
-            msg2 "Deleting chroot copy '%s'..." "$(basename "${copy}")"
-
-            lock 9 "$copy.lock" "Locking chroot copy '%s'" "$copy"
-
-            subvolume_delete_recursive "${copy}"
-            rm -rf --one-file-system "${copy}"
-        done
-        lock_close 9
-
-        rm -rf --one-file-system "${work_dir}"
-        clean_iso_root "${iso_root}"
-    fi
-
-    if ${iso_only}; then
-        [[ ! -d ${work_dir} ]] && die "Create images: %s -p %s -x" "${cmd}" "${PROFILE}"
-        compress_images
-        exit 1
-    fi
-    if ${images_only}; then
-        prepare_images
-        warning "Continue compress: %s -p %s -zc ..." "${cmd}" "${PROFILE}"
-        exit 1
-    else
-        prepare_images
-        compress_images
-    fi
-    msg "Finished building [%s]" "${PROFILE}"
-    show_elapsed_time "${FUNCNAME}" "${timer_start}"
-}
-
-load_user_info
-
-load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-
-clean_first=true
-pretend=false
-images_only=false
-iso_only=false
-log=false
-persist=false
-
-mkchroot_args=()
-cmd=${0##*/}
-
-REPOSITORY=${cmd##*-}
-
-usage() {
-    echo "Usage: ${cmd} [options]"
-    echo "    -p <profile>       Profile [default: ${PROFILE}]"
-    echo '    -r <dir>           Chroots directory'
-    echo "                       [default: ${CHROOTS_ISO}]"
-    echo '    -t <dir>           Target directory'
-    echo "                       [default: ${ISO_POOL}]"
-    echo '    -i <name>          Init system to use'
-    echo "                       [default: ${INITSYS}]"
-    echo '    -g <key>           The gpg key for sfs signing'
-    echo "                       [default: ${GPG_KEY}]"
-    echo '    -m                 Set SquashFS image mode to persistence'
-    echo '    -c                 Disable clean work dir'
-    echo '    -x                 Build images only'
-    echo '    -z                 Generate iso only'
-    echo '                       Requires pre built images (-x)'
-    echo '    -l                 Log to file'
-    echo '    -q                 Query settings and pretend build'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
-    exit $1
-}
-
-orig_argv=("$0" "$@")
-
-opts='p:r:t:i:g:czxmlqh'
-
-while getopts "${opts}" arg; do
-    case "${arg}" in
-        p) PROFILE="$OPTARG" ;;
-        r) CHROOTS_ISO="$OPTARG" ;;
-        t) ISO_POOL="$OPTARG" ;;
-        i) INITSYS="$OPTARG" ;;
-        g) GPG_KEY="$OPTARG" ;;
-        c) clean_first=false ;;
-        x) images_only=true ;;
-        z) iso_only=true ;;
-        m) persist=true ;;
-        l) log=true ;;
-        q) pretend=true ;;
-        h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
-    esac
-done
-
-shift $(($OPTIND - 1))
-
-check_root
-
-prepare_traps
-
-prepare_build
-
-${pretend} && display_settings && exit 1
-
-build

bin/buildpkg.in

@@ -1,114 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-VERSION=@version@
-
-LIBDIR='@libdir@'
-SYSCONFDIR='@sysconfdir@'
-DATADIR='@datadir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-import ${LIBDIR}/util.sh
-import ${LIBDIR}/util-chroot.sh
-
-load_user_info
-
-load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-
-create_first=false
-
-mkchrootpkg_args=(-c -n)
-
-cmd=${0##*/}
-repo=${cmd#*-}
-base_devel=('base-devel')
-
-case ${repo} in
-    system|world|galaxy) repo='default' ;;
-    lib32*) base_devel+=('multilib-devel') ;;
-    galaxy-gremlins|galaxy-goblins) repo=${repo#*-} ;;
-esac
-
-pacman_conf="${DATADIR}/pacman-${repo}.conf"
-[[ -f $AT_USERCONFDIR/pacman-${repo}.conf ]] && pacman_conf="$AT_USERCONFDIR/pacman-${repo}.conf"
-
-makepkg_conf="${DATADIR}/makepkg.conf"
-[[ -f $AT_USERCONFDIR/makepkg.conf ]] && makepkg_conf="$AT_USERCONFDIR/makepkg.conf"
-
-usage() {
-    echo "Usage: ${0##*/} [options] -- [mkchrootpkg_args]"
-    echo "    -r <dir>           Create chroots in this directory"
-    echo '    -c                 Recreate the chroot before building'
-    echo '    -h                 This help'
-    echo ''
-    echo "Default mkchrootpkg_args args: ${mkchrootpkg_args[*]}"
-    echo ''
-    exit $1
-}
-
-orig_argv=("$0" "$@")
-
-opts='hcr:'
-
-while getopts "${opts}" arg; do
-    case "${arg}" in
-        r) CHROOTS_PKG="$OPTARG" ;;
-        c) create_first=true ;;
-        h|?) usage 0 ;;
-        *) echo "invalid argument '%s'" "${arg}"; usage 1 ;;
-    esac
-done
-
-check_root SOURCE_DATE_EPOCH
-
-mkchrootpkg_args+=("${@:$OPTIND}")
-
-if ${create_first} || [[ ! -d "${CHROOTS_PKG}/${repo}-${ARCH}" ]];then
-    msg "Creating chroot for [%s] (%s)..." "${repo}" "${ARCH}"
-
-    for copy in "${CHROOTS_PKG}/${repo}-${ARCH}"/*; do
-        [[ -d $copy ]] || continue
-        msg2 "Deleting chroot copy '%s'..." "$(basename "${copy}")"
-
-        lock 9 "$copy.lock" "Locking chroot copy '%s'" "$copy"
-
-        subvolume_delete_recursive "${copy}"
-        rm -rf --one-file-system "${copy}"
-    done
-    lock_close 9
-
-    rm -rf --one-file-system "${CHROOTS_PKG}/${repo}-${ARCH}"
-    mkdir -p "${CHROOTS_PKG}/${repo}-${ARCH}"
-    setarch "${ARCH}" mkchroot \
-        -C "${pacman_conf}" \
-        -M "${makepkg_conf}" \
-        "${CHROOTS_PKG}/${repo}-${ARCH}/root" \
-        "${base_devel[@]}" || abort
-else
-    lock 9 "${CHROOTS_PKG}/${repo}-${ARCH}/root.lock" "Locking clean chroot"
-    chroot-run \
-        -C "${pacman_conf}" \
-        -M "${makepkg_conf}" \
-        "${CHROOTS_PKG}/${repo}-${ARCH}/root" \
-        pacman -Syu --noconfirm || abort
-fi
-
-# Always build official packages reproducibly
-if [[ ! -v SOURCE_DATE_EPOCH ]]; then
-    export SOURCE_DATE_EPOCH=$(date +%s)
-fi
-
-timer_start=$(get_timer)
-
-msg "Building in chroot for [%s] (%s)..." "${repo}" "${ARCH}"
-exec mkchrootpkg -r "${CHROOTS_PKG}/${repo}-${ARCH}" "${mkchrootpkg_args[@]}"
-
-show_elapsed_time "${FUNCNAME}" "${timer_start}"

bin/buildtree.in

@@ -1,255 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-VERSION=@version@
-
-LIBDIR='@libdir@'
-SYSCONFDIR='@sysconfdir@'
-DATADIR='@datadir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-import ${LIBDIR}/util.sh
-import ${LIBDIR}/util-pkg.sh
-import ${LIBDIR}/util-pkg-gitea.sh
-import ${LIBDIR}/util-pkg-subrepo.sh
-
-pull_tree_arch(){
-    cd ${TREE_DIR_ARCH}
-    for tree in ${tree_names[@]};do
-        if [[ -d ${tree} ]];then
-            cd ${tree}
-            msg "Checking (%s)" "${tree}"
-            pull_tree
-            cd ..
-        else
-            msg "Cloning (%s) ..." "$tree"
-            clone_tree "${HOST_TREE_ARCH}/${tree}"
-        fi
-    done
-}
-
-config_tree(){
-    local tree="$1"
-    cd $tree
-        git config --bool pull.rebase true
-        git config commit.gpgsign true
-        if [[ -n "${GPGKEY}" ]];then
-            git config user.signingkey "${GPGKEY}"
-        else
-            warning "No GPGKEY configured in makepkg.conf!"
-        fi
-    cd ..
-}
-
-pull_tree_artix(){
-    cd ${TREE_DIR_ARTIX}
-    for tree in ${tree_names[@]};do
-        if [[ -d ${tree} ]];then
-            config_tree "${tree}"
-            cd ${tree}
-            msg "Checking (%s)" "${tree}"
-            pull_tree
-            cd ..
-        else
-            msg "Cloning (%s) ..." "$tree"
-            clone_tree "${HOST_TREE_ARTIX}/${tree}"
-            config_tree "${tree}"
-        fi
-    done
-}
-
-mkrepo(){
-    local pkg="$1" team="$2"
-    local pkg_path=${TREE_DIR_ARTIX}/$team/$pkg
-
-    cd ${TREE_DIR_ARTIX}/$team
-
-    local org=$(get_pkg_org "$pkg")
-
-    create_repo "$pkg" "$org"
-
-    add_repo_to_team "$pkg" "$org" "$team"
-
-    subrepo_clone "$pkg" "$org"
-
-    prepare_dir "$pkg_path/trunk"
-
-    commit_jenkins_files "$pkg"
-}
-
-sync_pkg(){
-    local rsync_args=(-aWxvci --progress --delete-before --no-R --no-implied-dirs)
-    local src="$1" dest="$2" tree="$3"
-
-    info "Sync from archlinux (%s)" "$git_tree_arch"
-    rsync "${rsync_args[@]}" $src/ $dest/
-}
-
-show_deps(){
-    local src="$1" repo="$2"
-
-    source $src/PKGBUILD 2>/dev/null
-
-    [[ $arch == 'any' ]] && CARCH=any
-
-    local archver=$(get_full_version $pkg)
-
-    msg "git tree: %s" "$git_tree_arch"
-    msg2 "repo: %s" "$repo"
-    [[ -n ${pkgbase} ]] && msg2 "pkgbase: %s" "${pkgbase}"
-    msg2 "pkgname: %s" "${pkgname[*]}"
-    [[ -n $pkgdesc ]] && msg2 "pkgdesc: %s" "${pkgdesc}"
-    msg2 "Arch Version: %s" "$archver"
-    msg2 "arch: %s" "$CARCH"
-
-    [[ -n ${makedepends[@]} ]] && msg2 "makedepends: %s" "${makedepends[*]}"
-    [[ -n ${checkdepends[@]} ]] && msg2 "checkdepends: %s" "${checkdepends[*]}"
-    [[ -n ${depends[@]} ]] && msg2 "depends: %s" "${depends[*]}"
-    [[ -n ${optdepends[@]} ]] && msg2 "optdepends: %s" "${optdepends[@]}"
-}
-
-from_arch(){
-    local pkg="$1" src= dest=
-    local git_tree_arch=$(find_tree "${TREE_DIR_ARCH}" "$pkg")
-    [[ -z $git_tree_arch ]] && die "Package '%s' does not exist!" "$pkg"
-
-    local package=${TREE_DIR_ARCH}/$git_tree_arch/$pkg
-    local repo=$(find_repo "$package")
-
-    src=$package/repos/$repo
-
-    local git_tree_artix=$(find_tree "${TREE_DIR_ARTIX}" "$pkg")
-    dest=${TREE_DIR_ARTIX}/$git_tree_artix/$pkg/trunk
-
-    show_deps "$src" "$repo"
-
-    if [[ -d $dest ]];then
-        cd ${TREE_DIR_ARTIX}/$git_tree_artix
-
-        source $dest/PKGBUILD 2>/dev/null
-        local artixver=$(get_full_version $pkg)
-
-        msg2 "Artix Version: %s" "$artixver"
-        sync_pkg "$src" "$dest" "$git_tree_arch"
-        patch_pkg "$pkg"
-    else
-        [[ $git_tree_arch == 'packages' ]] && git_tree_artix=$git_tree_arch
-        [[ $git_tree_arch == 'community' ]] && git_tree_artix=$git_tree_arch
-
-        local pkg_path=${TREE_DIR_ARTIX}/$git_tree_artix/$pkg
-
-        cd ${TREE_DIR_ARTIX}/$git_tree_artix
-
-        local org=$(get_pkg_org "$pkg")
-
-        create_repo "$pkg" "$org"
-
-        add_repo_to_team "$pkg" "$org" "$git_tree_artix"
-
-        subrepo_clone "$pkg" "$org"
-
-        commit_jenkins_files "$pkg"
-
-#         dest=$pkg_path/trunk
-
-        sync_pkg "$src" "$dest" "$git_tree_arch"
-    fi
-}
-
-view_build(){
-    local pkg="$1" src=
-    local git_tree_arch=$(find_tree "${TREE_DIR_ARCH}" "$pkg")
-    [[ -z $git_tree_arch ]] && die "Package '%s' does not exist!" "$pkg"
-
-    local pkg_path=${TREE_DIR_ARCH}/$git_tree_arch/$pkg
-    local repo=$(find_repo "$pkg_path")
-
-    src=$pkg_path/repos/$repo
-
-    show_deps "$src" "$repo"
-}
-
-sync_repos(){
-    ${sync_arch} && pull_tree_arch
-    pull_tree_artix
-}
-
-load_user_info
-
-load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-load_vars "${PAC_USERCONFDIR}/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
-load_vars /etc/makepkg.conf
-
-sync=false
-sync_arch=true
-import=false
-view=false
-createnew=false
-conf=false
-
-PACKAGE=''
-
-tree_names=(packages community)
-TEAM=${tree_names[0]}
-SUBORG=''
-
-usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo '    -p <pkg>      Package name'
-    echo '    -t <team>     Team name (only with -n)'
-    echo "                  [default: ${TEAM}]"
-    echo '    -o <org>      Org of subrepo (only with -c)'
-    echo "    -s            Clone or pull repos"
-    echo "    -z            Don't clone or pull arch repos"
-    echo '    -i            Import a package from arch repos'
-    echo '    -m            Make new remote subrepo and clone it'
-    echo '    -C            Configure subrepo url'
-    echo '    -v            View package depends'
-    echo '    -h            This help'
-    echo ''
-    echo ''
-    exit $1
-}
-
-orig_argv=("$0" "$@")
-
-opts='p:t:o:csinzvh'
-
-while getopts "${opts}" arg; do
-    case "${arg}" in
-        p) PACKAGE="$OPTARG" ;;
-        t) TEAM="$OPTARG" ;;
-        o) SUBORG="$OPTARG" ;;
-        s) sync=true ;;
-        z) sync_arch=false ;;
-        i) import=true ;;
-        n) createnew=true ;;
-        v) view=true ;;
-        c) conf=true ;;
-        h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
-    esac
-done
-
-shift $(($OPTIND - 1))
-
-prepare_dir "${TREE_DIR_ARTIX}"
-prepare_dir "${TREE_DIR_ARCH}"
-
-${sync} && sync_repos
-
-${view} && view_build "${PACKAGE}"
-
-${import} && from_arch "${PACKAGE}"
-
-${createnew} && mkrepo "${PACKAGE}" "${TEAM}"
-
-${conf} && subrepo_config "${PACKAGE}" "${SUBORG}"

bin/checkpkg.in

@@ -1,82 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-VERSION=@version@
-
-LIBDIR='@libdir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-import ${LIBDIR}/util.sh
-import ${LIBDIR}/util-pkg.sh
-
-shopt -s extglob
-
-load_user_info
-
-load_vars "${PAC_USERCONFDIR}/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
-load_vars /etc/makepkg.conf
-
-if [[ ! -f PKGBUILD ]]; then
-    die 'This must be run in the directory of a built package.'
-fi
-
-. ./PKGBUILD
-if [[ $arch == 'any' ]]; then
-    CARCH='any'
-fi
-
-STARTDIR=$(pwd)
-TEMPDIR=$(mktemp -d --tmpdir checkpkg-script.XXXX)
-
-for _pkgname in "${pkgname[@]}"; do
-    target_pkgver=$(get_full_version "$_pkgname")
-    if ! pkgfile=$(find_cached_package "$_pkgname" "$target_pkgver" "$CARCH"); then
-        die 'tarball not found for package: %s' "${_pkgname}-$target_pkgver"
-    fi
-
-    ln -s "$pkgfile" "$TEMPDIR"
-
-    pkgurl=$(pacman -Spdd --print-format '%l' --noconfirm "$_pkgname")
-
-    if [[ $? -ne 0 ]]; then
-        die "Couldn't download previous package for %s." "$_pkgname"
-    fi
-
-    oldpkg=${pkgurl##*://*/}
-
-    if [[ ${oldpkg##*/} = ${pkgfile##*/} ]]; then
-        die "The built package (%s) is the one in the repo right now!" "$_pkgname"
-    fi
-
-    if [[ $pkgurl = file://* ]]; then
-        ln -s "${pkgurl#file://}" "$TEMPDIR/$oldpkg"
-    elif [[ -f "$PKGDEST/$oldpkg" ]]; then
-        ln -s "$PKGDEST/$oldpkg" "$TEMPDIR/$oldpkg"
-    elif [[ -f "$STARTDIR/$oldpkg" ]]; then
-        ln -s "$STARTDIR/$oldpkg" "$TEMPDIR/$oldpkg"
-    else
-        curl -fsLC - --retry 3 --retry-delay 3 -o "$TEMPDIR/$oldpkg" "$pkgurl"
-    fi
-
-    bsdtar tf "$TEMPDIR/$oldpkg" | sort > "$TEMPDIR/filelist-$_pkgname-old"
-    bsdtar tf "$pkgfile" | sort > "$TEMPDIR/filelist-$_pkgname"
-
-    sdiff -s "$TEMPDIR/filelist-$_pkgname-old" "$TEMPDIR/filelist-$_pkgname"
-
-    find-libprovides "$TEMPDIR/$oldpkg" 2>/dev/null | sort > "$TEMPDIR/libraries-$_pkgname-old"
-    find-libprovides "$pkgfile" 2>/dev/null | sort > "$TEMPDIR/libraries-$_pkgname"
-    if ! diff_output="$(sdiff -s "$TEMPDIR/libraries-$_pkgname-old" "$TEMPDIR/libraries-$_pkgname")"; then
-        msg "Sonames differ in %s!" "$_pkgname"
-        echo "$diff_output"
-    else
-        msg "No soname differences for %s" "$_pkgname."
-    fi
-done

bin/chroot-run.in

@@ -1,138 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-VERSION=@version@
-
-chroot_version=@chroot_version@
-
-LIBDIR='@libdir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-import ${LIBDIR}/util.sh
-import ${LIBDIR}/util-chroot.sh
-import ${LIBDIR}/util-mount.sh
-
-working_dir=''
-files=()
-nosetarch=false
-
-usage() {
-    echo "Usage: ${0##*/} [options] working-dir [run arguments]"
-    echo "A wrapper around chroot. Provides support for pacman."
-    echo
-    echo ' options:'
-    echo '    -C <file>     Location of a pacman config file'
-    echo '    -M <file>     Location of a makepkg config file'
-    echo '    -c <dir>      Set pacman cache'
-    echo '    -f <file>     Copy file from the host to the chroot'
-    echo '    -s            Do not run setarch'
-    echo '    -r <list>     Bind mountargs ro'
-    echo '    -w <list>     Bind mountargs rw'
-    echo '                  List format [src1:target1 ... srcN:targetN]'
-    echo '    -h            This message'
-    exit 1
-}
-
-orig_argv=("$0" "$@")
-
-opts='hC:M:c:r:w:f:s'
-
-while getopts ${opts} arg; do
-    case "${arg}" in
-        C) pacman_conf="$OPTARG" ;;
-        M) makepkg_conf="$OPTARG" ;;
-        c) cache_dir="$OPTARG" ;;
-        f) files+=("$OPTARG") ;;
-        s) nosetarch=true ;;
-        r) bindmounts_ro=("$OPTARG") ;;
-        w) bindmounts_rw=("$OPTARG") ;;
-        h|?) usage ;;
-        *) error "invalid argument '$arg'"; usage ;;
-    esac
-done
-shift $(($OPTIND - 1))
-
-(( $# < 1 )) && die 'You must specify a directory.'
-
-check_root
-
-working_dir=$(readlink -f "$1")
-shift 1
-
-[[ -z $working_dir ]] && die 'Please specify a working directory.'
-
-if [[ -z $cache_dir ]]; then
-    cache_dirs=($(pacman -v 2>&1 | grep '^Cache Dirs:' | sed 's/Cache Dirs:\s*//g'))
-else
-    cache_dirs=("$cache_dir")
-fi
-
-copy_hostconf () {
-    cp -a /etc/pacman.d/gnupg "$1/etc/pacman.d"
-
-    [[ -n $pacman_conf ]] && cp $pacman_conf "$1/etc/pacman.conf"
-
-    [[ -n $makepkg_conf ]] && cp $makepkg_conf "$1/etc/makepkg.conf"
-
-    local file
-    for file in "${files[@]}"; do
-        mkdir -p "$(dirname "$working_dir$file")"
-        cp -T "$file" "$working_dir$file"
-    done
-
-    sed -r "s|^#?\\s*CacheDir.+|CacheDir = ${cache_dirs[*]}|g" -i "$1/etc/pacman.conf"
-}
-
-chroot_extra_mount() {
-    chroot_add_resolv_conf "$1"
-    chroot_mount "/etc/hosts" "$1/etc/hosts" -B
-#     chroot_mount_conditional "[[ -e $1/etc/machine-id ]]" "/etc/machine-id" "$1/etc/machine-id" -B
-    chroot_mount "${cache_dirs[0]}" "$1${cache_dirs[0]}" -B
-
-    for cache_dir in ${cache_dirs[@]:1}; do
-        chroot_mount "$cache_dir" "$1${cache_dir}" -Br
-    done
-
-    for m in ${bindmounts_ro[@]}; do
-        chroot_mount "${m%%:*}" "$1${m##*:}" -Br
-    done
-
-    for m in ${bindmounts_rw[@]}; do
-        chroot_mount "${m%%:*}" "$1${m##*:}" -B
-    done
-}
-
-umask 0022
-
-# Sanity check
-if [[ ! -f "$working_dir/.artools" ]]; then
-    die "'%s' does not appear to be an artix chroot." "$working_dir"
-elif [[ $(cat "$working_dir/.artools") != $chroot_version ]]; then
-    die "chroot '%s' is not at version %s. Please rebuild." "$working_dir" "$chroot_version"
-fi
-
-chroot_api_mount "${working_dir}" || die "failed to setup API filesystems in chroot %s" "${working_dir}"
-
-chroot_extra_mount "${working_dir}"
-
-copy_hostconf "${working_dir}"
-
-eval $(grep '^CARCH=' "$working_dir/etc/makepkg.conf")
-
-${nosetarch} && unset CARCH
-
-${CARCH:+setarch "$CARCH"} chroot "${working_dir}" "$@"
-
-ret=$?
-
-kill_chroot_process "${working_dir}"
-
-exit $ret

bin/commitpkg.in

@@ -1,179 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-VERSION=@version@
-
-LIBDIR='@libdir@'
-SYSCONFDIR='@sysconfdir@'
-DATADIR='@datadir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-import ${LIBDIR}/util.sh
-import ${LIBDIR}/util-pkg.sh
-import ${LIBDIR}/util-pkg-subrepo.sh
-
-is_valid_repo(){
-    local src="$1"
-    case $src in
-        core|extra|community|multilib|testing|staging|community-testing|community-staging|multilib-testing|multilib-staging|trunk) return 0 ;;
-        *) return 1 ;;
-    esac
-}
-
-commit_pkg(){
-    local git_tree=$(find_tree "${TREE_DIR_ARTIX}" "${PACKAGE}")
-    if [[ -n ${git_tree} ]];then
-        cd ${TREE_DIR_ARTIX}/${git_tree}/${PACKAGE}
-
-        source trunk/PKGBUILD
-        [[ $arch == 'any' ]] && CARCH=any
-        local ver=$(get_full_version "${PACKAGE}")
-        local commit_msg=""
-
-        if ${remove};then
-            local action='remove'
-            if [[ "${REPO_SRC}" == 'trunk' ]];then
-                local pkg=${PACKAGE}
-                git rm -r trunk
-            else
-                local pkg="${PACKAGE}-$ver"
-                git rm -r repos/"${REPO_SRC}-$CARCH"
-            fi
-            commit_msg="[${REPO_SRC}] '$pkg' ${action}"
-            msg "Action: %s" "$commit_msg"
-        else
-            local action='modify'
-            commit_msg="[${REPO_SRC}] '${PACKAGE}-$ver' ${action}"
-            msg "Action: %s" "$commit_msg"
-            git add .
-
-        fi
-        git commit -m "$commit_msg"
-
-        cd ${TREE_DIR_ARTIX}/${git_tree}
-
-        if ${push};then
-            mainrepo_pull "${git_tree}"
-
-            subrepo_push "${PACKAGE}"
-            subrepo_clean "${PACKAGE}"
-#             sleep 1
-            mainrepo_push "${git_tree}"
-        fi
-        git prune
-    else
-        error "Package '%s' does not exist!" "${PACKAGE}"
-    fi
-}
-
-symlink_commit_pkg(){
-    local git_tree=$(find_tree "${TREE_DIR_ARTIX}" "${PACKAGE}")
-    if [[ -n ${git_tree} ]];then
-        cd ${TREE_DIR_ARTIX}/${git_tree}/${PACKAGE}
-
-        source trunk/PKGBUILD
-        [[ $arch == 'any' ]] && CARCH=any
-        local ver=$(get_full_version "${PACKAGE}")
-
-        if [[ ${REPO_SRC} == 'trunk' ]];then
-            local action='add'
-            local dest="${REPO_DEST}-$CARCH"
-
-            [[ -d repos/$dest ]] && git rm -r repos/$dest
-            [[ ! -d repos ]] && mkdir repos
-            [[ ! -d repos/$dest ]] && mkdir repos/$dest
-
-            cp trunk/* repos/$dest/
-        else
-            local action='move'
-            local src="${REPO_SRC}-$CARCH" dest="${REPO_DEST}-$CARCH"
-
-            [[ -d repos/$dest ]] && git rm -r repos/$dest
-            [[ ! -d repos ]] && mkdir repos
-            [[ ! -d repos/$dest ]] && mkdir repos/$dest
-
-            cp repos/$src/* repos/$dest/
-            git rm -r repos/$src
-        fi
-        local commit_msg="[${REPO_SRC}] -> [${REPO_DEST}] '${PACKAGE}-$ver' ${action}"
-        msg "Action: %s" "$commit_msg"
-
-        git add .
-        git commit -m "$commit_msg"
-
-        cd ${TREE_DIR_ARTIX}/${git_tree}
-
-        if ${push};then
-            mainrepo_pull "${git_tree}"
-
-            subrepo_push "${PACKAGE}"
-            subrepo_clean "${PACKAGE}"
-#             sleep 1
-            mainrepo_push "${git_tree}"
-        fi
-        git prune
-    else
-        error "Package '%s' does not exist!" "${PACKAGE}"
-    fi
-}
-
-load_user_info
-
-load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-load_vars "${PAC_USERCONFDIR}/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
-load_vars /etc/makepkg.conf
-
-REPO_SRC='trunk'
-PACKAGE=''
-remove=false
-push=false
-
-cmd=${0##*/}
-REPO_DEST=${cmd%pkg}
-
-usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo "    -s <name>          Source repository [default:${REPO_SRC}]"
-    echo '    -p <pkg>           Package name'
-    echo '    -r                 Delete from repo (commitpkg only)'
-    echo '    -u                 Push'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
-    exit $1
-}
-
-orig_argv=("$0" "$@")
-
-opts='p:s:urh'
-
-while getopts "${opts}" arg; do
-    case "${arg}" in
-        s) REPO_SRC="$OPTARG" ;;
-        p) PACKAGE="$OPTARG" ;;
-        r) remove=true ;;
-        u) push=true ;;
-        h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
-    esac
-done
-
-shift $(($OPTIND - 1))
-
-if $(is_valid_repo "${REPO_SRC}");then
-    if [[ "${cmd}" == 'commitpkg' ]];then
-        commit_pkg
-    else
-        symlink_commit_pkg
-    fi
-else
-    error "source repository '%s' is not valid!" "${REPO_SRC}"
-fi

bin/comparepkg.in

@@ -1,139 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-VERSION=@version@
-
-LIBDIR='@libdir@'
-SYSCONFDIR='@sysconfdir@'
-DATADIR='@datadir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-import ${LIBDIR}/util.sh
-import ${LIBDIR}/util-pkg.sh
-
-show_version_table(){
-    msg_table_header "%-20s %-20s %-25s %-30s %-30s" "Arch Repo" "Artix Repo" "Package" "Arch version" "Artix version"
-
-    for tree in ${tree_names[@]};do
-
-        local git=$(find ${TREE_DIR_ARTIX}/$tree/ -mindepth 1 -maxdepth 1 -type d)
-
-        for package in ${git[@]}; do
-
-            local pkg=${package##*/}
-            local artixrepo=$(find_repo "$package" "${staging}" "${unstable}")
-            local artixshow=${artixrepo%-*}
-            local pkgbuild=$package/repos/$artixrepo/PKGBUILD
-
-            if [[ -f $pkgbuild ]];then
-
-                source $pkgbuild 2>/dev/null
-                local artixver=$(get_full_version $pkg)
-
-                local archpath=$(get_import_path $pkg)
-
-                local archrepo=$(find_repo "$archpath" "${staging}" "${unstable}")
-
-                local archshow=${archrepo%-*}
-                pkgbuild=$archpath/repos/$archrepo/PKGBUILD
-
-                if [[ -f $pkgbuild ]];then
-                    source $pkgbuild 2>/dev/null
-                    local archver=$(get_full_version $pkg)
-                fi
-
-                local result=$(vercmp "$artixver" "$archver")
-
-                local repomatch=false
-                [[ "$archrepo" == "$artixrepo" ]] && repomatch=true
-
-                if ${move};then
-
-                    if [ $result -gt -1 ];then
-                        case $artixrepo in
-                            *testing*|*staging*)
-                                if $repomatch;then
-                                    msg_row "%-20s %-20s %-25s %-30s %-30s" "$archshow" "$artixshow" "$pkg" "$archver" "$artixver"
-                                else
-                                    msg_row_notify "%-20s %-20s %-25s %-30s %-30s" "$archshow" "$artixshow" "$pkg" "$archver" "$artixver"
-                                fi
-                            ;;
-                        esac
-                    fi
-
-                elif ${upgrades};then
-
-                    if [ $result -eq -1 ];then
-                        msg_row_upgrade "%-20s %-20s %-25s %-30s %-30s" "$archshow" "$artixshow" "$pkg" "$archver" "$artixver"
-                    fi
-
-                elif ${downgrades};then
-
-                    if [ $result -eq 1 ];then
-                        if [[ -n $archver ]] && [[ -n $archrepo ]];then
-                            msg_row_downgrade "%-20s %-20s %-25s %-30s %-30s" "$archshow" "$artixshow" "$pkg" "$archver" "$artixver"
-                        fi
-                    fi
-
-                fi
-                unset pkgver epoch pkgrel artixver archver pkgbuild archpath
-
-            fi
-        done
-    done
-}
-
-load_user_info
-
-load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-load_vars "${PAC_USERCONFDIR}/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
-load_vars /etc/makepkg.conf
-
-unstable=false
-staging=true
-upgrades=false
-downgrades=false
-move=false
-
-tree_names=(packages community)
-
-usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo '    -u            Show upgrade packages'
-    echo '    -d            Show downgrade packages'
-    echo '    -m            Show packages to move'
-    echo "    -x            Don't inlcude staging packages"
-    echo '    -y            Include unstable kde and gnome'
-    echo '    -h            This help'
-    echo ''
-    echo ''
-    exit $1
-}
-
-orig_argv=("$0" "$@")
-
-opts='udmxyh'
-
-while getopts "${opts}" arg; do
-    case "${arg}" in
-        u) upgrades=true ;;
-        d) downgrades=true ;;
-        m) move=true ;;
-        x) staging=false ;;
-        y) unstable=true ;;
-        h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
-    esac
-done
-
-shift $(($OPTIND - 1))
-
-show_version_table

bin/deployiso.in

@@ -1,78 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-VERSION=@version@
-
-LIBDIR='@libdir@'
-SYSCONFDIR='@sysconfdir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-import ${LIBDIR}/util.sh
-
-connect(){
-    echo "${ACCOUNT}@${FILE_HOST}:${FILE_HOME}"
-}
-
-prepare_transfer(){
-    DEST_DIR="/iso/${PROFILE}/"
-    SRC_DIR="${ISO_POOL}/${PROFILE}/"
-}
-
-sync_dir(){
-    msg "Start upload [%s] ..." "${PROFILE}"
-    rsync "${rsync_args[@]}" ${SRC_DIR} $(connect)${DEST_DIR}
-    msg "Done upload [%s]" "${PROFILE}"
-    show_elapsed_time "${FUNCNAME}" "${timer_start}"
-}
-
-load_user_info
-
-load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-
-update=false
-verbose=false
-
-rsync_args=(-aP --progress -e "ssh -p ${FILE_PORT}")
-
-usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo "    -p                 Source folder to upload [default: ${PROFILE}]"
-    echo "    -l                 Limit bandwidth in kB/s [default:${UPLIMIT}]"
-    echo '    -u                 Update remote directory'
-    echo '    -v                 Verbose output'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
-    exit $1
-}
-
-opts='p:l:uvh'
-
-while getopts "${opts}" arg; do
-    case "${arg}" in
-        p) PROFILE="$OPTARG" ;;
-        l) UPLIMIT="$OPTARG" ;;
-        u) update=true; rsync_args+=(-u) ;;
-        v) verbose=true; rsync_args+=(-v --stats) ;;
-        h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
-    esac
-done
-
-shift $(($OPTIND - 1))
-
-timer_start=$(get_timer)
-
-rsync_args+=(--bwlimit=${UPLIMIT})
-
-prepare_transfer
-
-sync_dir

bin/deploypkg.in

@@ -1,96 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-VERSION=@version@
-
-LIBDIR='@libdir@'
-SYSCONFDIR='@sysconfdir@'
-DATADIR='@datadir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-import ${LIBDIR}/util.sh
-import ${LIBDIR}/util-pkg.sh
-
-update_repo(){
-    local repo="$1" pkgfile ver ext=db.tar.xz
-    local repo_path=${REPOS_ROOT}/$repo/os/${ARCH} packages=()
-
-    source PKGBUILD
-
-    for name in ${pkgname[@]};do
-        pkgarch=$(get_pkg_arch "$name")
-        ver=$(get_full_version "$name")
-        if pkgfile=$(find_cached_package "$name" "$ver" "$pkgarch");then
-            local pkg=${pkgfile##*/}
-            info "Found: %s" "$pkg"
-            if ${add_pkg};then
-                local action='add'
-                packages+=("$pkg")
-#                 checkpkg "${pkgfile}" || return 2
-                if ${sign_pkg};then
-                    [[ -e ${pkgfile}.sig ]] && rm ${pkgfile}.sig
-                    signfile ${pkgfile}
-                fi
-                ln -sf ${pkgfile}{,.sig} $repo_path/
-            elif ${del_pkg};then
-                local action='remove'
-                packages+=("$name")
-                [[ -e $repo_path/$pkg ]] && rm $repo_path/$pkg
-                [[ -e $repo_path/$pkg.sig ]] && rm $repo_path/$pkg.sig
-            fi
-        fi
-    done
-    cd $repo_path
-    [[ -n $action ]] && repo-$action -R $repo.$ext ${packages[@]}
-    return 0
-}
-
-load_user_info
-
-load_config "${AT_USERCONFDIR}/artools.conf" || load_config "${SYSCONFDIR}/artools.conf"
-load_vars "${PAC_USERCONFDIR}/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
-load_vars /etc/makepkg.conf
-
-add_pkg=false
-del_pkg=false
-sign_pkg=false
-
-cmd=${0##*/}
-dest_repo=${cmd#*-}
-
-usage() {
-    echo "Usage: ${cmd} [options]"
-    echo '    -a                 Add package(s) to repository'
-    echo '    -r                 Remove package(s) from repository'
-    echo '    -s                 Sign package(s)'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
-    exit $1
-}
-
-opts='arsh'
-
-while getopts "${opts}" arg; do
-    case "${arg}" in
-        a) add_pkg=true; del_pkg=false ;;
-        r) del_pkg=true; add_pkg=false ;;
-        s) sign_pkg=true ;;
-        h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
-    esac
-done
-
-shift $(($OPTIND - 1))
-
-prepare_dir "${REPOS_ROOT}"
-
-update_repo "${dest_repo}"

bin/finddeps.in

@@ -1,48 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-VERSION=@version@
-
-LIBDIR='@libdir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-match=$1
-
-if [[ -z $match ]]; then
-    echo 'Usage: finddeps <depname>'
-    echo ''
-    echo 'Find packages that depend on a given depname.'
-    echo 'Run this script from the top-level directory of your ABS tree.'
-    echo ''
-    exit 1
-fi
-
-find $PWD -type d | while read d; do
-    if [[ -f "$d/PKGBUILD" ]]; then
-        unset pkgname depends makedepends optdepends
-        . "$d/PKGBUILD"
-        for dep in "${depends[@]}"; do
-            # lose the version comparator, if any
-            depname=${dep%%[<>=]*}
-            [[ $depname = $match ]] && msg "$d (depends)"
-        done
-        for dep in "${makedepends[@]}"; do
-            # lose the version comparator, if any
-            depname=${dep%%[<>=]*}
-            [[ $depname = $match ]] && msg "$d (makedepends)"
-        done
-        for dep in "${optdepends[@]/:*}"; do
-            # lose the version comaparator, if any
-            depname=${dep%%[<>=]*}
-            [[ $depname = $match ]] && msg "$d (optdepends)"
-        done
-    fi
-done

bin/fstabgen.in

@@ -1,232 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-VERSION=@version@
-
-shopt -s extglob
-
-LIBDIR='@libdir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-import ${LIBDIR}/util-fstab.sh
-
-write_source() {
-    local src=$1 spec= label= uuid= comment=()
-
-    label=$(lsblk -rno LABEL "$1" 2>/dev/null)
-    uuid=$(lsblk -rno UUID "$1" 2>/dev/null)
-
-    # bind mounts do not have a UUID!
-
-    case $bytag in
-        '')
-            [[ $uuid ]] && comment=("UUID=$uuid")
-            [[ $label ]] && comment+=("LABEL=$(mangle "$label")")
-        ;;
-        LABEL)
-            spec=$label
-            [[ $uuid ]] && comment=("$src" "UUID=$uuid")
-        ;;
-        UUID)
-            spec=$uuid
-            comment=("$src")
-            [[ $label ]] && comment+=("LABEL=$(mangle "$label")")
-        ;;
-        *)
-            [[ $uuid ]] && comment=("$1" "UUID=$uuid")
-            [[ $label ]] && comment+=("LABEL=$(mangle "$label")")
-            [[ $bytag ]] && spec=$(lsblk -rno "$bytag" "$1" 2>/dev/null)
-        ;;
-    esac
-
-    [[ $comment ]] && printf '# %s\n' "${comment[*]}"
-
-    if [[ $spec ]]; then
-        printf '%-20s' "$bytag=$(mangle "$spec")"
-    else
-        printf '%-20s' "$(mangle "$src")"
-    fi
-}
-
-optstring_apply_quirks() {
-    local varname=$1 fstype=$2
-
-    # SELinux displays a 'seclabel' option in /proc/self/mountinfo. We can't know
-    # if the system we're generating the fstab for has any support for SELinux (as
-    # one might install Arch from a Fedora environment), so let's remove it.
-    optstring_remove_option "$varname" seclabel
-
-    # Prune 'relatime' option for any pseudofs. This seems to be a rampant
-    # default which the kernel often exports even if the underlying filesystem
-    # doesn't support it. Example: https://bugs.archlinux.org/task/54554.
-    if awk -v fstype="$fstype" '$1 == fstype { exit 1 }' /proc/filesystems; then
-        optstring_remove_option "$varname" relatime
-    fi
-
-    case $fstype in
-        f2fs)
-        # These are Kconfig options for f2fs. Kernels supporting the options will
-        # only provide the negative versions of these (e.g. noacl), and vice versa
-        # for kernels without support.
-        optstring_remove_option "$varname" noacl,acl,nouser_xattr,user_xattr
-        ;;
-        vfat)
-        # Before Linux v3.8, "cp" is prepended to the value of the codepage.
-        if optstring_get_option "$varname" codepage && [[ $codepage = cp* ]]; then
-            optstring_remove_option "$varname" codepage
-            optstring_append_option "$varname" "codepage=${codepage#cp}"
-        fi
-        ;;
-    esac
-}
-
-usage() {
-  cat <<EOF
-usage: ${0##*/} [options] root
-
-  Options:
-    -f FILTER      Restrict output to mountpoints matching the prefix FILTER
-    -L             Use labels for source identifiers (shortcut for -t LABEL)
-    -p             Exclude pseudofs mounts (default behavior)
-    -P             Include printing mounts
-    -t TAG         Use TAG for source identifiers
-    -U             Use UUIDs for source identifiers (shortcut for -t UUID)
-
-    -h             Print this help message
-
-fstabgen generates output suitable for addition to an fstab file based on the
-devices mounted under the mountpoint specified by the given root.
-
-EOF
-}
-
-if [[ -z $1 || $1 = @(-h|--help) ]]; then
-  usage
-  exit $(( $# ? 0 : 1 ))
-fi
-
-while getopts ':f:LPpt:U' flag; do
-    case $flag in
-        L) bytag=LABEL ;;
-        U) bytag=UUID ;;
-        f) prefixfilter=$OPTARG ;;
-        P) pseudofs=1 ;;
-        p) pseudofs=0 ;;
-        t) bytag=${OPTARG^^} ;;
-        :) die '%s: option requires an argument -- '\''%s'\' "${0##*/}" "$OPTARG" ;;
-        ?) die '%s: invalid option -- '\''%s'\' "${0##*/}" "$OPTARG" ;;
-    esac
-done
-shift $(( OPTIND - 1 ))
-
-(( $# )) || die "No root directory specified"
-root=$(realpath -mL "$1"); shift
-
-if ! mountpoint -q "$root"; then
-    die "$root is not a mountpoint"
-fi
-
-# handle block devices
-findmnt -Recvruno SOURCE,TARGET,FSTYPE,OPTIONS,FSROOT "$root" |
-while read -r src target fstype opts fsroot; do
-    if (( !pseudofs )) && fstype_is_pseudofs "$fstype"; then
-        continue
-    fi
-
-    [[ $target = "$prefixfilter"* ]] || continue
-
-    # default 5th and 6th columns
-    dump=0 pass=2
-
-    src=$(unmangle "$src")
-    target=$(unmangle "$target")
-    target=${target#$root}
-
-    if (( !foundroot )) && findmnt "$src" "$root" >/dev/null; then
-        # this is root. we can't possibly have more than one...
-        pass=1 foundroot=1
-    fi
-
-    # if there's no fsck tool available, then only pass=0 makes sense.
-    if ! fstype_has_fsck "$fstype"; then
-        pass=0
-    fi
-
-    if [[ $fsroot != / ]]; then
-        if [[ $fstype = btrfs ]]; then
-        opts+=,subvol=${fsroot#/}
-        else
-        # it's a bind mount
-        src=$(findmnt -funcevo TARGET "$src")$fsroot
-        if [[ $src -ef $target ]]; then
-            # hrmm, this is weird. we're probably looking at a file or directory
-            # that was bound into a chroot from the host machine. Ignore it,
-            # because this won't actually be a valid mount. Worst case, the user
-            # just re-adds it.
-            continue
-        fi
-        fstype=none
-        opts+=,bind
-        pass=0
-        fi
-    fi
-
-    # filesystem quirks
-    case $fstype in
-        fuseblk)
-        # well-behaved FUSE filesystems will report themselves as fuse.$fstype.
-        # this is probably NTFS-3g, but let's just make sure.
-        if ! newtype=$(lsblk -no FSTYPE "$src") || [[ -z $newtype ]]; then
-            # avoid blanking out fstype, leading to an invalid fstab
-            error 'Failed to derive real filesystem type for FUSE device on %s' "$target"
-        else
-            fstype=$newtype
-        fi
-        ;;
-    esac
-
-    optstring_apply_quirks "opts" "$fstype"
-
-    # write one line
-    write_source "$src"
-    printf '\t%-10s' "/$(mangle "${target#/}")" "$fstype" "$opts"
-    printf '\t%s %s' "$dump" "$pass"
-    printf '\n\n'
-done
-
-# handle swaps devices
-{
-    # ignore header
-    read
-
-    while read -r device type _ _ prio; do
-        options=defaults
-        if [[ $prio != -1 ]]; then
-        options+=,pri=$prio
-        fi
-
-        # skip files marked deleted by the kernel
-        [[ $device = *'\040(deleted)' ]] && continue
-
-        if [[ $type = file ]]; then
-        printf '%-20s' "$device"
-        elif [[ $device = /dev/dm-+([0-9]) ]]; then
-        # device mapper doesn't allow characters we need to worry
-        # about being mangled, and it does the escaping of dashes
-        # for us in sysfs.
-        write_source "$(dm_name_for_devnode "$device")"
-        else
-        write_source "$(unmangle "$device")"
-        fi
-
-        printf '\t%-10s\t%-10s\t%-10s\t0 0\n\n' 'none' 'swap' "$options"
-    done
-} </proc/swaps

bin/mkchroot.in

@@ -1,120 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-VERSION=@version@
-
-chroot_version=@chroot_version@
-
-LIBDIR='@libdir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-import ${LIBDIR}/util.sh
-import ${LIBDIR}/util-chroot.sh
-
-working_dir=''
-files=()
-
-nosetarch=false
-copy_mirrorlist=true
-basestrap_args=(-Gc)
-
-usage() {
-    echo "Usage: ${0##*/} [options] working-dir package-list..."
-    echo ' options:'
-    echo '    -C <file>     Location of a pacman config file'
-    echo '    -M <file>     Location of a makepkg config file'
-    echo '    -c <dir>      Set pacman cache'
-    echo '    -f <file>     Copy file from the host to the chroot'
-    echo '    -m            Do not copy mirrorlist to the chroot'
-    echo '    -s            Do not run setarch'
-    echo '    -h            This message'
-    exit 1
-}
-
-orig_argv=("$0" "$@")
-
-opts='hC:M:c:f:sm'
-
-while getopts ${opts} arg; do
-    case "${arg}" in
-        C) pacman_conf="$OPTARG" ;;
-        M) makepkg_conf="$OPTARG" ;;
-        c) cache_dir="$OPTARG" ;;
-        f) files+=("$OPTARG") ;;
-        s) nosetarch=true ;;
-        m) copy_mirrorlist=false; basestrap_args+=(-M) ;;
-        h|?) usage ;;
-        *) error "invalid argument '%s'" "$arg"; usage ;;
-    esac
-done
-shift $(($OPTIND - 1))
-
-(( $# < 2 )) && die 'You must specify a directory and one or more packages.'
-
-check_root
-
-working_dir="$(readlink -f $1)"
-shift 1
-
-[[ -z $working_dir ]] && die 'Please specify a working directory.'
-
-if [[ -z $cache_dir ]]; then
-    cache_dirs=($(pacman -v $cache_conf 2>&1 | grep '^Cache Dirs:' | sed 's/Cache Dirs:\s*//g'))
-else
-    cache_dirs=(${cache_dir})
-fi
-
-umask 0022
-
-#[[ -e $working_dir ]] && die "Working directory '%s' already exists" "$working_dir"
-
-#mkdir -p "$working_dir"
-
-[[ ! -d $working_dir ]] && mkdir -p "$working_dir"
-
-lock 9 "${working_dir}.lock" "Locking chroot"
-
-if is_btrfs "$working_dir"; then
-    rmdir "$working_dir"
-    if ! btrfs subvolume create "$working_dir"; then
-        die "Couldn't create subvolume for '%s'" "$working_dir"
-    fi
-    chmod 0755 "$working_dir"
-fi
-
-for f in "${files[@]}"; do
-    mkdir -p "$(dirname "$working_dir$f")"
-    cp "$f" "$working_dir$f"
-done
-
-_env=()
-while read -r varname; do
-    _env+=("$varname=${!varname}")
-done < <(declare -x | sed -r 's/^declare -x ([^=]*)=.*/\1/' | grep -i '_proxy$')
-env -i "${_env[@]}" \
-basestrap "${basestrap_args[@]}" ${pacman_conf:+-C "$pacman_conf"} "$working_dir" ${cache_dirs[@]/#/--cachedir=} "$@" || die 'Failed to install all packages'
-
-echo "$chroot_version" > "$working_dir/.artools"
-
-if [[ ! -f "$working_dir/etc/locale.gen.orig" ]];then
-    mv "$working_dir/etc/locale.gen" "$working_dir/etc/locale.gen.orig"
-fi
-printf '%s.UTF-8 UTF-8\n' en_US de_DE > "$working_dir/etc/locale.gen"
-echo 'LANG=en_US.UTF-8' > "$working_dir/etc/locale.conf"
-
-dbus-uuidgen --ensure="$working_dir"/etc/machine-id
-
-chroot_args=(${pacman_conf:+-C "$pacman_conf"} ${makepkg_conf:+-M "$makepkg_conf"} ${cache_dir:+-c "$cache_dir"})
-${nosetarch} && chroot_args+=(${nosetarch:+-s})
-
-exec chroot-run \
-    "${chroot_args[@]}" \
-    "$working_dir" locale-gen

bin/mkchrootpkg.in

@@ -1,436 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-VERSION=@version@
-
-LIBDIR='@libdir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-import ${LIBDIR}/util.sh
-import ${LIBDIR}/util-chroot.sh
-
-shopt -s nullglob
-
-usage() {
-    echo "Usage: ${0##*/} [options] -r <chrootdir> [--] [makepkg args]"
-    echo ' Run this script in a PKGBUILD dir to build a package inside a'
-    echo ' clean chroot. Arguments passed to this script after the'
-    echo ' end-of-options marker (--) will be passed to makepkg.'
-    echo ''
-    echo ' The chroot dir consists of the following directories:'
-    echo ' <chrootdir>/{root, copy} but only "root" is required'
-    echo ' by default. The working copy will be created as needed'
-    echo ''
-    echo 'The chroot "root" directory must be created via the following'
-    echo 'command:'
-    echo '    mkchroot <chrootdir>/root base-devel'
-    echo ''
-    echo 'This script reads {SRC,SRCPKG,PKG,LOG}DEST, MAKEFLAGS and PACKAGER'
-    echo 'from makepkg.conf(5), if those variables are not part of the'
-    echo 'environment.'
-    echo ''
-    echo "Default makepkg args: ${default_makepkg_args[*]}"
-    echo ''
-    echo 'Flags:'
-    echo '-h         This help'
-    echo '-c         Clean the chroot before building'
-    echo '-d <dir>   Bind directory into build chroot as read-write'
-    echo '-D <dir>   Bind directory into build chroot as read-only'
-    echo '-u         Update the working copy of the chroot before building'
-    echo '           This is useful for rebuilds without dirtying the pristine'
-    echo '           chroot'
-    echo '-r <dir>   The chroot dir to use'
-    echo '-I <pkg>   Install a package into the working copy of the chroot'
-    echo '-l <copy>  The directory to use as the working copy of the chroot'
-    echo '           Useful for maintaining multiple copies'
-    echo "           Default: $copy"
-    echo '-n         Run namcap on the package'
-    echo '-T         Build in a temporary directory'
-    echo '-U         Run makepkg as a specified user'
-    exit 1
-}
-
-# {{{ functions
-
-# Usage: sync_chroot $rootdir $copydir [$copy]
-sync_chroot() {
-    local rootdir=$1
-    local copydir=$2
-    local copy=${3:-$2}
-
-    if [[ "$rootdir" -ef "$copydir" ]]; then
-        error 'Cannot sync copy with itself: %s' "$copydir"
-        return 1
-    fi
-
-    # Get a read lock on the root chroot to make
-    # sure we don't clone a half-updated chroot
-    slock 8 "$rootdir.lock" \
-        "Locking clean chroot [%s]" "$rootdir"
-
-    stat_busy "Synchronizing chroot copy [%s] -> [%s]" "$rootdir" "$copy"
-    if is_subvolume "$rootdir" && is_same_fs "$rootdir" "$(dirname -- "$copydir")" && ! mountpoint -q "$copydir"; then
-        if is_subvolume "$copydir"; then
-            subvolume_delete_recursive "$copydir" ||
-                die "Unable to delete subvolume %s" "$copydir"
-        else
-            # avoid change of filesystem in case of an umount failure
-            rm --recursive --force --one-file-system "$copydir" ||
-                die "Unable to delete %s" "$copydir"
-        fi
-        btrfs subvolume snapshot "$rootdir" "$copydir" >/dev/null ||
-            die "Unable to create subvolume %s" "$copydir"
-    else
-        mkdir -p "$copydir"
-        rsync -a --delete -q -W -x "$rootdir/" "$copydir"
-    fi
-    stat_done
-
-    # Drop the read lock again
-    lock_close 8
-
-    # Update mtime
-    touch "$copydir"
-}
-
-# Usage: delete_chroot $copydir [$copy]
-delete_chroot() {
-    local copydir=$1
-    local copy=${1:-$2}
-
-    stat_busy "Removing chroot copy [%s]" "$copy"
-    if is_subvolume "$copydir" && ! mountpoint -q "$copydir"; then
-        subvolume_delete_recursive "$copydir" ||
-            die "Unable to delete subvolume %s" "$copydir"
-    else
-        # avoid change of filesystem in case of an umount failure
-        rm --recursive --force --one-file-system "$copydir" ||
-            die "Unable to delete %s" "$copydir"
-    fi
-
-    # remove lock file
-    rm -f "$copydir.lock"
-    stat_done
-}
-
-# Usage: install_packages $copydir $pkgs...
-install_packages() {
-    local copydir=$1
-    local install_pkgs=("${@:2}")
-
-    local -a pkgnames
-    local ret
-
-    pkgnames=("${install_pkgs[@]##*/}")
-
-    cp -- "${install_pkgs[@]}" "$copydir/root/"
-    chroot-run \
-        -r "${bindmounts_ro[@]}" \
-        -r "${bindmounts_rw[@]}" \
-        "$copydir" \
-        pacman -U --noconfirm -- "${pkgnames[@]/#//root/}"
-    ret=$?
-    rm -- "${pkgnames[@]/#/$copydir/root/}"
-
-    return $ret
-}
-
-# Usage: prepare_chroot $copydir $HOME $keepbuilddir $run_namcap
-# Globals:
-#  - MAKEFLAGS
-#  - PACKAGER
-prepare_chroot() {
-    local copydir=$1
-    local USER_HOME=$2
-    local keepbuilddir=$3
-    local run_namcap=$4
-
-    [[ $keepbuilddir = true ]] || rm -rf "$copydir/build"
-
-    local builduser_uid builduser_gid
-    builduser_uid="${SUDO_UID:-$UID}"
-    builduser_gid="$(id -g "$builduser_uid")"
-    local install="install -o $builduser_uid -g $builduser_gid"
-    local x
-
-    # We can't use useradd without chrooting, otherwise it invokes PAM modules
-    # which we might not be able to load (i.e. when building i686 packages on
-    # an x86_64 host).
-    sed -e '/^builduser:/d' -i "$copydir"/etc/{passwd,shadow,group}
-    printf >>"$copydir/etc/group"  'builduser:x:%d:\n' "$builduser_gid"
-    printf >>"$copydir/etc/passwd" 'builduser:x:%d:%d:builduser:/build:/bin/bash\n' "$builduser_uid" "$builduser_gid"
-    printf >>"$copydir/etc/shadow" 'builduser:!!:%d::::::\n' "$(( $(date -u +%s) / 86400 ))"
-
-    $install -d "$copydir"/{build,startdir,{pkg,srcpkg,src,log}dest}
-
-    sed -e '/^MAKEFLAGS=/d' -e '/^PACKAGER=/d' -i "$copydir/etc/makepkg.conf"
-    for x in BUILDDIR=/build PKGDEST=/pkgdest SRCPKGDEST=/srcpkgdest SRCDEST=/srcdest LOGDEST=/logdest \
-        "MAKEFLAGS='${MAKEFLAGS:-}'" "PACKAGER='${PACKAGER:-}'"
-    do
-        grep -q "^$x" "$copydir/etc/makepkg.conf" && continue
-        echo "$x" >>"$copydir/etc/makepkg.conf"
-    done
-
-    cat > "$copydir/etc/sudoers.d/builduser-pacman" <<EOF
-builduser ALL = NOPASSWD: /usr/bin/pacman
-EOF
-    chmod 440 "$copydir/etc/sudoers.d/builduser-pacman"
-
-    # This is a little gross, but this way the script is recreated every time in the
-    # working copy
-    {
-        printf '#!/bin/bash\n'
-        declare -f _chrootbuild
-        declare -p SOURCE_DATE_EPOCH 2>/dev/null || true
-        printf '_chrootbuild "$@" || exit\n'
-
-        if [[ $run_namcap = true ]]; then
-            declare -f _chrootnamcap
-            printf '_chrootnamcap || exit\n'
-        fi
-    } >"$copydir/chrootbuild"
-    chmod +x "$copydir/chrootbuild"
-}
-
-# These functions aren't run in makechrootpkg,
-# so no global variables
-_chrootbuild() {
-    # No coredumps
-    ulimit -c 0
-
-    . /etc/locale.conf
-
-    # shellcheck source=/dev/null
-    . /etc/profile
-
-    # Beware, there are some stupid arbitrary rules on how you can
-    # use "$" in arguments to commands with "sudo -i".  ${foo} or
-    # ${1} is OK, but $foo or $1 isn't.
-    # https://bugzilla.sudo.ws/show_bug.cgi?id=765
-    sudo --preserve-env=SOURCE_DATE_EPOCH -iu builduser bash -c 'cd /startdir; makepkg "$@"' -bash "$@"
-    ret=$?
-    case $ret in
-        0|14)
-            return 0;;
-        *)
-            return $ret;;
-    esac
-}
-
-_chrootnamcap() {
-    pacman -S --needed --noconfirm namcap
-    for pkgfile in /startdir/PKGBUILD /pkgdest/*; do
-        echo "Checking ${pkgfile##*/}"
-        sudo -u builduser namcap "$pkgfile" 2>&1 | tee "/logdest/${pkgfile##*/}-namcap.log"
-    done
-}
-
-# Usage: download_sources $copydir $makepkg_user
-# Globals:
-#  - SRCDEST
-download_sources() {
-    local copydir=$1
-    local makepkg_user=$2
-
-    local builddir
-    builddir="$(mktemp -d)"
-    chown "$makepkg_user:" "$builddir"
-
-    # Ensure sources are downloaded
-    sudo -u "$makepkg_user" --preserve-env=GNUPGHOME \
-        env SRCDEST="$SRCDEST" BUILDDIR="$builddir" \
-        makepkg --config="$copydir/etc/makepkg.conf" --verifysource -o ||
-        die "Could not download sources."
-
-    # Clean up garbage from verifysource
-    rm -rf "$builddir"
-}
-
-# Usage: move_products $copydir $owner
-# Globals:
-#  - PKGDEST
-#  - LOGDEST
-#  - SRCPKGDEST
-move_products() {
-    local copydir=$1
-    local src_owner=$2
-
-    local pkgfile
-    for pkgfile in "$copydir"/pkgdest/*; do
-        chown "$src_owner" "$pkgfile"
-        mv "$pkgfile" "$PKGDEST"
-
-        # Fix broken symlink because of temporary chroot PKGDEST /pkgdest
-        if [[ "$PWD" != "$PKGDEST" && -L "$PWD/${pkgfile##*/}" ]]; then
-            ln -sf "$PKGDEST/${pkgfile##*/}"
-        fi
-    done
-
-    local l
-    for l in "$copydir"/logdest/*; do
-        [[ $l == */logpipe.* ]] && continue
-        chown "$src_owner" "$l"
-        mv "$l" "$LOGDEST"
-    done
-
-    for s in "$copydir"/srcpkgdest/*; do
-        chown "$src_owner" "$s"
-        mv "$s" "$SRCPKGDEST"
-
-        # Fix broken symlink because of temporary chroot SRCPKGDEST /srcpkgdest
-        if [[ "$PWD" != "$SRCPKGDEST" && -L "$PWD/${s##*/}" ]]; then
-            ln -sf "$SRCPKGDEST/${s##*/}"
-        fi
-    done
-}
-# }}}
-
-orig_argv=("$0" "$@")
-
-main() {
-    default_makepkg_args=(--syncdeps --noconfirm --log --holdver --skipinteg)
-    makepkg_args=("${default_makepkg_args[@]}")
-    keepbuilddir=false
-    update_first=false
-    clean_first=false
-    run_namcap=false
-    temp_chroot=false
-    chrootdir=
-    passeddir=
-    makepkg_user=
-    declare -a install_pkgs
-    declare -i ret=0
-
-    bindmounts_ro=()
-    bindmounts_rw=()
-
-    copy=$USER
-    [[ -n ${SUDO_USER:-} ]] && copy=$SUDO_USER
-    [[ -z "$copy" || $copy = root ]] && copy=copy
-    src_owner=${SUDO_USER:-$USER}
-
-    local opts='hcur:I:l:nTD:d:U:'
-
-    while getopts "${opts}" arg; do
-        case "$arg" in
-            c) clean_first=true ;;
-            D) bindmounts_ro+=("$OPTARG") ;;
-            d) bindmounts_rw+=("$OPTARG") ;;
-            u) update_first=true ;;
-            r) passeddir="$OPTARG" ;;
-            I) install_pkgs+=("$OPTARG") ;;
-            l) copy="$OPTARG" ;;
-            n) run_namcap=true; makepkg_args+=(--install) ;;
-            T) temp_chroot=true; copy+="-$$" ;;
-            U) makepkg_user="$OPTARG" ;;
-            h|*) usage ;;
-        esac
-    done
-
-    [[ ! -f PKGBUILD && -z "${install_pkgs[*]}" ]] && die 'This must be run in a directory containing a PKGBUILD.'
-    [[ -n $makepkg_user && -z $(id -u "$makepkg_user") ]] && die 'Invalid makepkg user.'
-    makepkg_user=${makepkg_user:-${SUDO_USER:-$USER}}
-
-    check_root SOURCE_DATE_EPOCH,GNUPGHOME
-
-    # Canonicalize chrootdir, getting rid of trailing /
-    chrootdir=$(readlink -e "$passeddir")
-    [[ ! -d $chrootdir ]] && die "No chroot dir defined, or invalid path '%s'" "$passeddir"
-    [[ ! -d $chrootdir/root ]] && die "Missing chroot dir root directory. Try using: mkchroot %s/root base-devel" "$chrootdir"
-
-    if [[ ${copy:0:1} = / ]]; then
-        copydir=$copy
-    else
-        copydir="$chrootdir/$copy"
-    fi
-
-    # Pass all arguments after -- right to makepkg
-    makepkg_args+=("${@:$OPTIND}")
-
-    # See if -R or -e was passed to makepkg
-    for arg in "${makepkg_args[@]}"; do
-        case ${arg%%=*} in
-            --repackage|--noextract) keepbuilddir=true; break ;;
-            --repackage|--noextract) keepbuilddir=true; break ;;
-            --*) ;;
-            -*R*|-*e*) keepbuilddir=true; break ;;
-        esac
-    done
-
-    load_user_info
-
-    umask 0022
-
-    load_vars "${XDG_CONFIG_HOME:-$USER_HOME/.config}/pacman/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
-    load_vars /etc/makepkg.conf
-
-    # Use PKGBUILD directory if these don't exist
-    [[ -d $PKGDEST ]]    || PKGDEST=$PWD
-    [[ -d $SRCDEST ]]    || SRCDEST=$PWD
-    [[ -d $SRCPKGDEST ]] || SRCPKGDEST=$PWD
-    [[ -d $LOGDEST ]]    || LOGDEST=$PWD
-
-    # Lock the chroot we want to use. We'll keep this lock until we exit.
-    lock 9 "$copydir.lock" "Locking chroot copy [%s]" "$copy"
-
-    if [[ ! -d $copydir ]] || $clean_first; then
-        sync_chroot "$chrootdir/root" "$copydir" "$copy"
-    fi
-
-    $update_first && chroot-run \
-            -r "${bindmounts_ro[@]}" \
-            -w "${bindmounts_rw[@]}" \
-            "$copydir" \
-            pacman -Syu --noconfirm
-
-    if [[ -n ${install_pkgs[*]:-} ]]; then
-        install_packages "$copydir" "${install_pkgs[@]}"
-        ret=$?
-        # If there is no PKGBUILD we have done
-        [[ -f PKGBUILD ]] || return $ret
-    fi
-
-    if [[ "$(id -u "$makepkg_user")" == 0 ]]; then
-        error "Running makepkg as root is not allowed."
-        exit 1
-    fi
-
-    download_sources "$copydir" "$makepkg_user"
-
-    prepare_chroot "$copydir" "$USER_HOME" "$keepbuilddir" "$run_namcap"
-
-    bindmounts_rw+=("${PWD}:/startdir" "${SRCDEST}:/srcdest")
-
-    if chroot-run \
-        -r "${bindmounts_ro[*]}" \
-        -w "${bindmounts_rw[*]}" \
-        "$copydir" \
-        /chrootbuild "${makepkg_args[@]}"
-    then
-        move_products "$copydir" "$src_owner"
-    else
-        (( ret += 1 ))
-    fi
-
-    $temp_chroot && delete_chroot "$copydir" "$copy"
-
-    if (( ret != 0 )); then
-        if $temp_chroot; then
-            die "Build failed"
-        else
-            die "Build failed, check %s/build" "$copydir"
-        fi
-    else
-        true
-    fi
-}
-
-main "$@"

bin/pkg2yaml.in

@@ -1,44 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-VERSION=@version@
-
-VERSION=0.10.4.r2.gd0e3c4e
-
-if [[ -f "$1"/PKGBUILD ]]; then
-    LIBRARY=${LIBRARY:-'/usr/share/makepkg'}
-
-    for lib in "$LIBRARY"/*.sh; do
-        source "$lib"
-    done
-    . /etc/makepkg.conf
-
-    . "$1"/PKGBUILD
-
-    pkgfile=$(print_all_package_names)
-fi
-
-NL=$'\n'
-
-Yaml="%YAML 1.2"$NL
-Yaml+="---"$NL
-
-Yaml+="pkgfile:"$NL
-for f in ${pkgfile[@]};do
-    Yaml+="  - ${f##*/}"$NL
-done
-
-Yaml+="pkgname:"$NL
-for n in ${pkgname[@]};do
-    Yaml+="  - ${n##*/}"$NL
-done
-
-printf '%s' "${Yaml}"

bin/signfile.in

@@ -1,36 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-VERSION=@version@
-
-LIBDIR='@libdir@'
-
-[[ -r ${LIBDIR}/util-msg.sh ]] && source ${LIBDIR}/util-msg.sh
-import ${LIBDIR}/util.sh
-
-load_user_info
-
-load_vars "${PAC_USERCONFDIR}/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
-load_vars /etc/makepkg.conf
-
-file_to_sign="$1"
-
-if [ ! -e "$1" ]; then
-    error "%s does not exist!" "$file_to_sign"
-    exit 1
-fi
-
-msg2 "Signing [%s] with key %s" "${file_to_sign##*/}" "${GPGKEY}..."
-if [[ -n "${BUILDBOT_GPGP}" ]]; then
-    gpg --batch --passphrase "${BUILDBOT_GPGP}" --detach-sign "$file_to_sign"
-else
-    gpg --detach-sign --use-agent -u "${GPGKEY}" "$file_to_sign"
-fi

config/conf/artools-base.conf

@@ -0,0 +1,12 @@
+#!/hint/bash
+# shellcheck disable=2034
+
+#############################################
+################ artools-base ###############
+#############################################
+
+# build dir where buildpkg or buildiso chroots are created
+# CHROOTS_DIR=/var/lib/artools
+
+# the workspace directory
+# WORKSPACE_DIR="${USER_HOME}/artools-workspace"

config/conf/artools-iso.conf

@@ -0,0 +1,24 @@
+#!/hint/bash
+# shellcheck disable=2034
+
+#############################################
+################ artools-iso ################
+#############################################
+
+# the iso storage directory
+# ISO_POOL="${WORKSPACE_DIR}/iso"
+
+# the dist release; default: auto
+# ISO_VERSION=$(date +%Y%m%d)
+
+# possible values: openrc, runit, s6, suite66, dinit
+# INITSYS="openrc"
+
+# gpg key; leave empty or commented to skip img signing
+# GPG_KEY=""
+
+# possible values: zstd (default), xz
+# COMPRESSION="zstd"
+
+# zstd only: range 1..22
+# COMPRESSION_LEVEL=15

config/conf/artools-pkg.conf

@@ -0,0 +1,20 @@
+#!/hint/bash
+# shellcheck disable=2034
+
+#############################################
+################ artools-pkg ################
+#############################################
+
+# gitea user access token for buildtree
+# GIT_TOKEN=''
+
+# TREE_DIR_ARTIX=${WORKSPACE_DIR}/artixlinux
+
+# default repos root for deploypkg
+# REPOS_ROOT=${WORKSPACE_DIR}/repos
+
+# default mirror for checkrepo
+# REPOS_MIRROR="http://mirror1.artixlinux.org/repos"
+
+# default packaging org
+# GIT_ORG='packages'

config/makepkg/x86_64.conf

@@ -1,4 +1,6 @@
 #!/hint/bash
+# shellcheck disable=2034
+
 #
 # /etc/makepkg.conf
 #
@@ -9,10 +11,10 @@
 #
 #-- The download utilities that makepkg should use to acquire sources
 #  Format: 'protocol::agent'
-DLAGENTS=('file::/usr/bin/curl -gqC - -o %o %u'
-          'ftp::/usr/bin/curl -gqfC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
-          'http::/usr/bin/curl -gqb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
-          'https::/usr/bin/curl -gqb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
+DLAGENTS=('file::/usr/bin/curl -qgC - -o %o %u'
+          'ftp::/usr/bin/curl -qgfC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
+          'http::/usr/bin/curl -qgb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
+          'https::/usr/bin/curl -qgb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
           'rsync::/usr/bin/rsync --no-motd -z %u %o'
           'scp::/usr/bin/scp -C %u %o')
 
@@ -24,6 +26,7 @@ DLAGENTS=('file::/usr/bin/curl -gqC - -o %o %u'
 #-- The package required by makepkg to download VCS sources
 #  Format: 'protocol::package'
 VCSCLIENTS=('bzr::bzr'
+            'fossil::fossil'
             'git::git'
             'hg::mercurial'
             'svn::subversion')
@@ -36,21 +39,26 @@ CARCH="x86_64"
 CHOST="x86_64-pc-linux-gnu"
 
 #-- Compiler and Linker Flags
-CPPFLAGS="-D_FORTIFY_SOURCE=2"
-CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong -fno-plt"
-CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong -fno-plt"
+#CPPFLAGS=""
+CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions \
+        -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security \
+        -fstack-clash-protection -fcf-protection"
+CXXFLAGS="$CFLAGS -Wp,-D_GLIBCXX_ASSERTIONS"
 LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now"
+LTOFLAGS="-flto=auto"
+RUSTFLAGS=""
 #-- Make Flags: change this for DistCC/SMP systems
 #MAKEFLAGS="-j2"
 #-- Debugging flags
-DEBUG_CFLAGS="-g -fvar-tracking-assignments"
-DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
+DEBUG_CFLAGS="-g"
+DEBUG_CXXFLAGS="$DEBUG_CFLAGS"
+DEBUG_RUSTFLAGS="-C debuginfo=2"
 
 #########################################################################
 # BUILD ENVIRONMENT
 #########################################################################
 #
-# Defaults: BUILDENV=(!distcc !color !ccache check !sign)
+# Makepkg defaults: BUILDENV=(!distcc !color !ccache check !sign)
 #  A negated environment option will do the opposite of the comments below.
 #
 #-- distcc:   Use the Distributed C/C++/ObjC compiler
@@ -73,7 +81,7 @@ BUILDENV=(!distcc color !ccache check !sign)
 #   These are default values for the options=() settings
 #########################################################################
 #
-# Default: OPTIONS=(!strip docs libtool staticlibs emptydirs !zipman !purge !debug)
+# Makepkg defaults: OPTIONS=(!strip docs libtool staticlibs emptydirs !zipman !purge !debug !lto)
 #  A negated option will do the opposite of the comments below.
 #
 #-- strip:      Strip symbols from binaries/libraries
@@ -84,11 +92,12 @@ BUILDENV=(!distcc color !ccache check !sign)
 #-- zipman:     Compress manual (man and info) pages in MAN_DIRS with gzip
 #-- purge:      Remove files specified by PURGE_TARGETS
 #-- debug:      Add debugging flags as specified in DEBUG_* variables
+#-- lto:        Add compile flags for building with link time optimization
 #
-OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !debug)
+OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !debug lto)
 
-#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
-INTEGRITY_CHECK=(md5)
+#-- File integrity checks to use. Valid: md5, sha1, sha224, sha256, sha384, sha512, b2
+INTEGRITY_CHECK=(sha256)
 #-- Options to be used when stripping binaries. See `man strip' for details.
 STRIP_BINARIES="--strip-all"
 #-- Options to be used when stripping shared libraries. See `man strip' for details.
@@ -130,16 +139,24 @@ DBGSRCDIR="/usr/src/debug"
 COMPRESSGZ=(gzip -c -f -n)
 COMPRESSBZ2=(bzip2 -c -f)
 COMPRESSXZ=(xz -c -z -)
+COMPRESSZST=(zstd -c -T0 --ultra -20 -)
 COMPRESSLRZ=(lrzip -q)
 COMPRESSLZO=(lzop -q)
 COMPRESSZ=(compress -c -f)
+COMPRESSLZ4=(lz4 -q)
+COMPRESSLZ=(lzip -c -f)
 
 #########################################################################
 # EXTENSION DEFAULTS
 #########################################################################
 #
-# WARNING: Do NOT modify these variables unless you know what you are
-#          doing.
-#
-PKGEXT='.pkg.tar.xz'
+PKGEXT='.pkg.tar.zst'
 SRCEXT='.src.tar.gz'
+
+#########################################################################
+# OTHER
+#########################################################################
+#
+#-- Command used to run pacman as root, instead of trying sudo and su
+#PACMAN_AUTH=()
+# vim: set ft=sh ts=2 sw=2 et:

config/pacman/default.conf

@@ -16,10 +16,9 @@
 #GPGDir      = /etc/pacman.d/gnupg/
 #HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
 #CleanMethod = KeepInstalled
-#UseDelta    = 0.7
 Architecture = auto
 
 # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
@@ -32,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -44,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -69,12 +70,15 @@ LocalFileSigLevel = Optional
 # repo name header and Include lines. You can add preferred servers immediately
 # after the header, and they will be used before the default mirrors.
 
-#[gremlins]
+#[system-gremlins]
 #Include = /etc/pacman.d/mirrorlist
 
 [system]
 Include = /etc/pacman.d/mirrorlist
 
+#[world-gremlins]
+#Include = /etc/pacman.d/mirrorlist
+
 [world]
 Include = /etc/pacman.d/mirrorlist
 
@@ -84,39 +88,8 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-#[testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-[extra]
-Include = /etc/pacman.d/mirrorlist-arch
-
-#[community-testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-[community]
-Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib]
-#Include = /etc/pacman.d/mirrorlist-arch

config/pacman/goblins.conf

@@ -16,10 +16,9 @@
 #GPGDir      = /etc/pacman.d/gnupg/
 #HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
 #CleanMethod = KeepInstalled
-#UseDelta    = 0.7
 Architecture = auto
 
 # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
@@ -32,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -44,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -69,15 +70,21 @@ LocalFileSigLevel = Optional
 # repo name header and Include lines. You can add preferred servers immediately
 # after the header, and they will be used before the default mirrors.
 
-[goblins]
+[system-goblins]
 Include = /etc/pacman.d/mirrorlist
 
-[gremlins]
+[system-gremlins]
 Include = /etc/pacman.d/mirrorlist
 
 [system]
 Include = /etc/pacman.d/mirrorlist
 
+[world-goblins]
+Include = /etc/pacman.d/mirrorlist
+
+[world-gremlins]
+Include = /etc/pacman.d/mirrorlist
+
 [world]
 Include = /etc/pacman.d/mirrorlist
 
@@ -90,51 +97,8 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-[lib32-goblins]
-Include = /etc/pacman.d/mirrorlist
-
-[lib32-gremlins]
-Include = /etc/pacman.d/mirrorlist
-
-[lib32]
-Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-[staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[extra]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[multilib-staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[multilib-testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[multilib]
-Include = /etc/pacman.d/mirrorlist-arch

config/pacman/gremlins.conf

@@ -0,0 +1,95 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+#Color
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
+VerbosePkgLists
+ParallelDownloads = 5
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Artix Linux
+# packagers with `pacman-key --populate artix`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The gremlins repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+[system-gremlins]
+Include = /etc/pacman.d/mirrorlist
+
+[system]
+Include = /etc/pacman.d/mirrorlist
+
+[world-gremlins]
+Include = /etc/pacman.d/mirrorlist
+
+[world]
+Include = /etc/pacman.d/mirrorlist
+
+[galaxy-gremlins]
+Include = /etc/pacman.d/mirrorlist
+
+[galaxy]
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs

config/pacman/lib32-goblins.conf

@@ -16,10 +16,9 @@
 #GPGDir      = /etc/pacman.d/gnupg/
 #HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
 #CleanMethod = KeepInstalled
-#UseDelta    = 0.7
 Architecture = auto
 
 # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
@@ -32,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -44,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -69,15 +70,27 @@ LocalFileSigLevel = Optional
 # repo name header and Include lines. You can add preferred servers immediately
 # after the header, and they will be used before the default mirrors.
 
-[gremlins]
+[system-goblins]
+Include = /etc/pacman.d/mirrorlist
+
+[system-gremlins]
 Include = /etc/pacman.d/mirrorlist
 
 [system]
 Include = /etc/pacman.d/mirrorlist
 
+[world-goblins]
+Include = /etc/pacman.d/mirrorlist
+
+[world-gremlins]
+Include = /etc/pacman.d/mirrorlist
+
 [world]
 Include = /etc/pacman.d/mirrorlist
 
+[galaxy-goblins]
+Include = /etc/pacman.d/mirrorlist
+
 [galaxy-gremlins]
 Include = /etc/pacman.d/mirrorlist
 
@@ -87,6 +100,9 @@ Include = /etc/pacman.d/mirrorlist
 # If you want to run 32 bit applications on your x86_64 system,
 # enable the lib32 repositories as required here.
 
+[lib32-goblins]
+Include = /etc/pacman.d/mirrorlist
+
 [lib32-gremlins]
 Include = /etc/pacman.d/mirrorlist
 
@@ -98,25 +114,3 @@ Include = /etc/pacman.d/mirrorlist
 #[custom]
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-[testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[extra]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[multilib-testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[multilib]
-Include = /etc/pacman.d/mirrorlist-arch

config/pacman/lib32-gremlins.conf

@@ -16,10 +16,9 @@
 #GPGDir      = /etc/pacman.d/gnupg/
 #HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
 #CleanMethod = KeepInstalled
-#UseDelta    = 0.7
 Architecture = auto
 
 # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
@@ -32,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -44,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -69,12 +70,15 @@ LocalFileSigLevel = Optional
 # repo name header and Include lines. You can add preferred servers immediately
 # after the header, and they will be used before the default mirrors.
 
-[gremlins]
+[system-gremlins]
 Include = /etc/pacman.d/mirrorlist
 
 [system]
 Include = /etc/pacman.d/mirrorlist
 
+[world-gremlins]
+Include = /etc/pacman.d/mirrorlist
+
 [world]
 Include = /etc/pacman.d/mirrorlist
 
@@ -87,36 +91,14 @@ Include = /etc/pacman.d/mirrorlist
 # If you want to run 32 bit applications on your x86_64 system,
 # enable the lib32 repositories as required here.
 
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
+[lib32-gremlins]
+Include = /etc/pacman.d/mirrorlist
 
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
+[lib32]
+Include = /etc/pacman.d/mirrorlist
 
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-[testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[extra]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community]
-Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib]
-#Include = /etc/pacman.d/mirrorlist-arch

config/pacman/lib32.conf

@@ -16,10 +16,9 @@
 #GPGDir      = /etc/pacman.d/gnupg/
 #HookDir     = /etc/pacman.d/hooks/
 HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
 #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
 #CleanMethod = KeepInstalled
-#UseDelta    = 0.7
 Architecture = auto
 
 # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
@@ -32,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -44,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -69,12 +70,15 @@ LocalFileSigLevel = Optional
 # repo name header and Include lines. You can add preferred servers immediately
 # after the header, and they will be used before the default mirrors.
 
-#[gremlins]
+#[system-gremlins]
 #Include = /etc/pacman.d/mirrorlist
 
 [system]
 Include = /etc/pacman.d/mirrorlist
 
+#[world-gremlins]
+#Include = /etc/pacman.d/mirrorlist
+
 [world]
 Include = /etc/pacman.d/mirrorlist
 
@@ -98,25 +102,3 @@ Include = /etc/pacman.d/mirrorlist
 #[custom]
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-#[testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-[extra]
-Include = /etc/pacman.d/mirrorlist-arch
-
-#[community-testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-[community]
-Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-[multilib]
-Include = /etc/pacman.d/mirrorlist-arch

config/setarch-aliases.d/x86_64_v3

@@ -0,0 +1 @@
+x86_64

contrib/makepkg/PKGBUILD.proto

@@ -0,0 +1,48 @@
+#!/hint/bash
+# shellcheck disable=2034
+
+# This is an example PKGBUILD file, so that shellcheck can know what
+# variables to expect be set after including a PKGBUILD.
+
+# Maintainer: Your Name <youremail@domain.com>
+pkgname=NAME
+pkgver=VERSION
+pkgrel=1
+epoch=
+pkgdesc=""
+arch=()
+url=""
+license=('GPL')
+groups=()
+depends=()
+makedepends=()
+checkdepends=()
+optdepends=()
+provides=()
+conflicts=()
+replaces=()
+backup=()
+options=()
+install=
+changelog=
+source=("$pkgname-$pkgver.tar.gz"
+        "$pkgname-$pkgver.patch")
+noextract=()
+md5sums=()
+validpgpkeys=()
+
+prepare() {
+	:
+}
+
+build() {
+	:
+}
+
+check() {
+	:
+}
+
+package() {
+	:
+}

data/artools.conf

@@ -1,45 +0,0 @@
-#############################################
-################ artools-base ###############
-#############################################
-
-# build dir where buildpkg or buildiso chroots are created
-# CHROOTS_DIR=/var/lib/artools
-
-# the workspace directory
-# WORKSPACE_DIR="/home/${OWNER}/artools-workspace"
-
-#############################################
-################ artools-pkg ################
-#############################################
-
-# gitea user access token
-# GIT_TOKEN=''
-
-# HOST_TREE_ARTIX='gitea@gitea.artixlinux.org:artix'
-
-# HOST_TREE_ARCH=git://projects.archlinux.org/svntogit
-
-# default repos root
-# REPOS_ROOT=${WORKSPACE_DIR}/repos
-
-#############################################
-################ artools-iso ################
-#############################################
-
-# the iso storage directory
-# ISO_POOL="${WORKSPACE_DIR}/iso"
-
-# the dist release; default: auto
-# ISO_VERSION=$(date +%Y%m%d)
-
-# possible values: openrc, runit (s6 not yet supported)
-# INITSYS="openrc"
-
-# gpg key; leave empty or commented to skip sfs signing
-# GPG_KEY=""
-
-# set upload bandwidth limit in kB/s
-# UPLIMIT=1000
-
-# the server user
-# ACCOUNT=[SetUser]

data/mkinitcpio.conf

@@ -1,5 +0,0 @@
-MODULES=(loop dm-snapshot)
-
-HOOKS=(base udev artix_shutdown artix artix_loop_mnt artix_pxe_common artix_pxe_http artix_pxe_nbd artix_pxe_nfs artix_kms modconf block filesystems keyboard keymap)
-
-COMPRESSION="xz"

data/pacman-gnome-wobble.conf

@@ -1,146 +0,0 @@
-#
-# /etc/pacman.conf
-#
-# See the pacman.conf(5) manpage for option and repository directives
-
-#
-# GENERAL OPTIONS
-#
-[options]
-# The following paths are commented out with their default values listed.
-# If you wish to use different paths, uncomment and update the paths.
-#RootDir     = /
-#DBPath      = /var/lib/pacman/
-#CacheDir    = /var/cache/pacman/pkg/
-#LogFile     = /var/log/pacman.log
-#GPGDir      = /etc/pacman.d/gnupg/
-#HookDir     = /etc/pacman.d/hooks/
-HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
-#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
-#CleanMethod = KeepInstalled
-#UseDelta    = 0.7
-Architecture = auto
-
-# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
-#IgnorePkg   =
-#IgnoreGroup =
-
-#NoUpgrade   =
-#NoExtract   =
-
-# Misc options
-#UseSyslog
-#Color
-#TotalDownload
-CheckSpace
-VerbosePkgLists
-
-# By default, pacman accepts packages signed by keys that its local keyring
-# trusts (see pacman-key and its man page), as well as unsigned packages.
-SigLevel    = Required DatabaseOptional
-LocalFileSigLevel = Optional
-#RemoteFileSigLevel = Required
-
-# NOTE: You must run `pacman-key --init` before first using pacman; the local
-# keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
-
-#
-# REPOSITORIES
-#   - can be defined here or included from another file
-#   - pacman will search repositories in the order defined here
-#   - local/custom mirrors can be added here or in separate files
-#   - repositories listed first will take precedence when packages
-#     have identical names, regardless of version number
-#   - URLs will have $repo replaced by the name of the current repo
-#   - URLs will have $arch replaced by the name of the architecture
-#
-# Repository entries are of the format:
-#       [repo-name]
-#       Server = ServerName
-#       Include = IncludePath
-#
-# The header [repo-name] is crucial - it must be present and
-# uncommented to enable the repo.
-#
-
-# The gremlins repositories are disabled by default. To enable, uncomment the
-# repo name header and Include lines. You can add preferred servers immediately
-# after the header, and they will be used before the default mirrors.
-
-[gnome-wobble]
-Include = /etc/pacman.d/mirrorlist
-
-[goblins]
-Include = /etc/pacman.d/mirrorlist
-
-[gremlins]
-Include = /etc/pacman.d/mirrorlist
-
-[system]
-Include = /etc/pacman.d/mirrorlist
-
-[world]
-Include = /etc/pacman.d/mirrorlist
-
-[galaxy-goblins]
-Include = /etc/pacman.d/mirrorlist
-
-[galaxy-gremlins]
-Include = /etc/pacman.d/mirrorlist
-
-[galaxy]
-Include = /etc/pacman.d/mirrorlist
-
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-goblins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
-# An example of a custom package repository.  See the pacman manpage for
-# tips on creating your own repositories.
-#[custom]
-#SigLevel = Optional TrustAll
-#Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-[gnome-unstable]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[extra]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community]
-Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-staging]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib]
-#Include = /etc/pacman.d/mirrorlist-arch

data/pacman-goblins.conf

@@ -1,140 +0,0 @@
-#
-# /etc/pacman.conf
-#
-# See the pacman.conf(5) manpage for option and repository directives
-
-#
-# GENERAL OPTIONS
-#
-[options]
-# The following paths are commented out with their default values listed.
-# If you wish to use different paths, uncomment and update the paths.
-#RootDir     = /
-#DBPath      = /var/lib/pacman/
-#CacheDir    = /var/cache/pacman/pkg/
-#LogFile     = /var/log/pacman.log
-#GPGDir      = /etc/pacman.d/gnupg/
-#HookDir     = /etc/pacman.d/hooks/
-HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
-#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
-#CleanMethod = KeepInstalled
-#UseDelta    = 0.7
-Architecture = auto
-
-# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
-#IgnorePkg   =
-#IgnoreGroup =
-
-#NoUpgrade   =
-#NoExtract   =
-
-# Misc options
-#UseSyslog
-#Color
-#TotalDownload
-CheckSpace
-VerbosePkgLists
-
-# By default, pacman accepts packages signed by keys that its local keyring
-# trusts (see pacman-key and its man page), as well as unsigned packages.
-SigLevel    = Required DatabaseOptional
-LocalFileSigLevel = Optional
-#RemoteFileSigLevel = Required
-
-# NOTE: You must run `pacman-key --init` before first using pacman; the local
-# keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
-
-#
-# REPOSITORIES
-#   - can be defined here or included from another file
-#   - pacman will search repositories in the order defined here
-#   - local/custom mirrors can be added here or in separate files
-#   - repositories listed first will take precedence when packages
-#     have identical names, regardless of version number
-#   - URLs will have $repo replaced by the name of the current repo
-#   - URLs will have $arch replaced by the name of the architecture
-#
-# Repository entries are of the format:
-#       [repo-name]
-#       Server = ServerName
-#       Include = IncludePath
-#
-# The header [repo-name] is crucial - it must be present and
-# uncommented to enable the repo.
-#
-
-# The gremlins repositories are disabled by default. To enable, uncomment the
-# repo name header and Include lines. You can add preferred servers immediately
-# after the header, and they will be used before the default mirrors.
-
-[goblins]
-Include = /etc/pacman.d/mirrorlist
-
-[gremlins]
-Include = /etc/pacman.d/mirrorlist
-
-[system]
-Include = /etc/pacman.d/mirrorlist
-
-[world]
-Include = /etc/pacman.d/mirrorlist
-
-[galaxy-goblins]
-Include = /etc/pacman.d/mirrorlist
-
-[galaxy-gremlins]
-Include = /etc/pacman.d/mirrorlist
-
-[galaxy]
-Include = /etc/pacman.d/mirrorlist
-
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-goblins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
-# An example of a custom package repository.  See the pacman manpage for
-# tips on creating your own repositories.
-#[custom]
-#SigLevel = Optional TrustAll
-#Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-[staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[extra]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community]
-Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-staging]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib]
-#Include = /etc/pacman.d/mirrorlist-arch

data/pacman-kde-wobble.conf

@@ -1,146 +0,0 @@
-#
-# /etc/pacman.conf
-#
-# See the pacman.conf(5) manpage for option and repository directives
-
-#
-# GENERAL OPTIONS
-#
-[options]
-# The following paths are commented out with their default values listed.
-# If you wish to use different paths, uncomment and update the paths.
-#RootDir     = /
-#DBPath      = /var/lib/pacman/
-#CacheDir    = /var/cache/pacman/pkg/
-#LogFile     = /var/log/pacman.log
-#GPGDir      = /etc/pacman.d/gnupg/
-#HookDir     = /etc/pacman.d/hooks/
-HoldPkg     = pacman glibc
-#XferCommand = /usr/bin/curl -C - -f %u > %o
-#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
-#CleanMethod = KeepInstalled
-#UseDelta    = 0.7
-Architecture = auto
-
-# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
-#IgnorePkg   =
-#IgnoreGroup =
-
-#NoUpgrade   =
-#NoExtract   =
-
-# Misc options
-#UseSyslog
-#Color
-#TotalDownload
-CheckSpace
-VerbosePkgLists
-
-# By default, pacman accepts packages signed by keys that its local keyring
-# trusts (see pacman-key and its man page), as well as unsigned packages.
-SigLevel    = Required DatabaseOptional
-LocalFileSigLevel = Optional
-#RemoteFileSigLevel = Required
-
-# NOTE: You must run `pacman-key --init` before first using pacman; the local
-# keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
-
-#
-# REPOSITORIES
-#   - can be defined here or included from another file
-#   - pacman will search repositories in the order defined here
-#   - local/custom mirrors can be added here or in separate files
-#   - repositories listed first will take precedence when packages
-#     have identical names, regardless of version number
-#   - URLs will have $repo replaced by the name of the current repo
-#   - URLs will have $arch replaced by the name of the architecture
-#
-# Repository entries are of the format:
-#       [repo-name]
-#       Server = ServerName
-#       Include = IncludePath
-#
-# The header [repo-name] is crucial - it must be present and
-# uncommented to enable the repo.
-#
-
-# The gremlins repositories are disabled by default. To enable, uncomment the
-# repo name header and Include lines. You can add preferred servers immediately
-# after the header, and they will be used before the default mirrors.
-
-[kde-wobble]
-Include = /etc/pacman.d/mirrorlist
-
-[goblins]
-Include = /etc/pacman.d/mirrorlist
-
-[gremlins]
-Include = /etc/pacman.d/mirrorlist
-
-[system]
-Include = /etc/pacman.d/mirrorlist
-
-[world]
-Include = /etc/pacman.d/mirrorlist
-
-[galaxy-goblins]
-Include = /etc/pacman.d/mirrorlist
-
-[galaxy-gremlins]
-Include = /etc/pacman.d/mirrorlist
-
-[galaxy]
-Include = /etc/pacman.d/mirrorlist
-
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-goblins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
-# An example of a custom package repository.  See the pacman manpage for
-# tips on creating your own repositories.
-#[custom]
-#SigLevel = Optional TrustAll
-#Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-[kde-unstable]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[extra]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community]
-Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-staging]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib]
-#Include = /etc/pacman.d/mirrorlist-arch

data/patches/artix-bash.patch

@@ -1,87 +0,0 @@
---- /dev/null
-+++ b/artix.bashrc
-@@ -0,0 +1,46 @@
-+use_color=true
-+
-+# Set colorful PS1 only on colorful terminals.
-+# dircolors --print-database uses its own built-in database
-+# instead of using /etc/DIR_COLORS.  Try to use the external file
-+# first to take advantage of user additions.  Use internal bash
-+# globbing instead of external grep binary.
-+safe_term=${TERM//[^[:alnum:]]/?}   # sanitize TERM
-+match_lhs=""
-+[[ -f ~/.dir_colors   ]] && match_lhs="${match_lhs}$(<~/.dir_colors)"
-+[[ -f /etc/DIR_COLORS ]] && match_lhs="${match_lhs}$(</etc/DIR_COLORS)"
-+[[ -z ${match_lhs}    ]] \
-+	&& type -P dircolors >/dev/null \
-+	&& match_lhs=$(dircolors --print-database)
-+[[ $'\n'${match_lhs} == *$'\n'"TERM "${safe_term}* ]] && use_color=true
-+
-+if ${use_color} ; then
-+	# Enable colors for ls, etc.  Prefer ~/.dir_colors #64489
-+	if type -P dircolors >/dev/null ; then
-+		if [[ -f ~/.dir_colors ]] ; then
-+			eval $(dircolors -b ~/.dir_colors)
-+		elif [[ -f /etc/DIR_COLORS ]] ; then
-+			eval $(dircolors -b /etc/DIR_COLORS)
-+		fi
-+	fi
-+
-+	if [[ ${EUID} == 0 ]] ; then
-+		PS1='\[\033[01;31m\][\h\[\033[01;36m\] \W\[\033[01;31m\]]\$\[\033[00m\] '
-+	else
-+		PS1='\[\033[01;36m\][\u@\h\[\033[01;37m\] \W\[\033[01;36m\]]\$\[\033[00m\] '
-+	fi
-+
-+	alias ls='ls --color=auto'
-+	alias grep='grep --colour=auto'
-+	alias egrep='egrep --colour=auto'
-+	alias fgrep='fgrep --colour=auto'
-+else
-+	if [[ ${EUID} == 0 ]] ; then
-+		# show root@ when we don't have colors
-+		PS1='\u@\h \W \$ '
-+	else
-+		PS1='\u@\h \w \$ '
-+	fi
-+fi
-+
-+unset use_color safe_term match_lhs sh
---- a/dot.bashrc
-+++ b/dot.bashrc
-@@ -5,5 +5,5 @@
- # If not running interactively, don't do anything
- [[ $- != *i* ]] && return
-
--alias ls='ls --color=auto'
--PS1='[\u@\h \W]\$ '
-+# alias ls='ls --color=auto'
-+# PS1='[\u@\h \W]\$ '
-
---- a/system.bashrc
-+++ a/system.bashrc
-@@ -1,5 +1,5 @@
- #
--# /etc/bash.bashrc
-+# /etc/bash/bashrc
- #
-
- # If not running interactively, don't do anything
-@@ -19,4 +19,8 @@
-     ;;
- esac
-
-+for sh in /etc/bash/bashrc.d/*.bashrc ; do
-+	[[ -r ${sh} ]] && source "${sh}"
-+done
-+
- [ -r /usr/share/bash-completion/bash_completion   ] && . /usr/share/bash-completion/bash_completion
-
---- a/system.bash_logout
-+++ a/system.bash_logout
-@@ -1,3 +1,3 @@
- #
--# /etc/bash.bash_logout
-+# /etc/bash/bash_logout
- #
-

initcpio/Makefile

@@ -1,23 +0,0 @@
-DIRMODE = -dm0755
-MODE =  -m0755
-
-CPIOHOOKS = \
-	$(wildcard hooks/*)
-
-CPIOINST = \
-	$(wildcard install/*)
-
-SCRIPT = \
-	$(wildcard script/*)
-
-install_initcpio:
-	install $(DIRMODE) $(DESTDIR)$(CPIODIR)/hooks
-	install $(MODE) $(CPIOHOOKS) $(DESTDIR)$(CPIODIR)/hooks
-
-	install $(DIRMODE) $(DESTDIR)$(CPIODIR)/install
-	install $(MODE) $(CPIOINST) $(DESTDIR)$(CPIODIR)/install
-	install $(MODE) $(SCRIPT) $(DESTDIR)$(CPIODIR)
-
-install: install_initcpio
-
-.PHONY: install

initcpio/hooks/artix

@@ -1,250 +0,0 @@
-# args: source, newroot, mountpoint
-_mnt_dmsnapshot() {
-    local img="${1}"
-    local mnt="${2}"
-    local img_fullname="${img##*/}";
-    local img_name="${img_fullname%%.*}"
-    local dm_snap_name="${dm_snap_prefix}_${img_name}"
-    local ro_dev ro_dev_size rw_dev
-
-    ro_dev=$(losetup --find --show --read-only "${img}")
-    echo ${ro_dev} >> /run/artix/used_block_devices
-    ro_dev_size=$(blockdev --getsz ${ro_dev})
-
-    if [[ "${cow_persistent}" == "P" ]]; then
-        if [[ -f "/run/artix/cowspace/${cow_directory}/${img_name}.cow" ]]; then
-            msg ":: Found '/run/artix/cowspace/${cow_directory}/${img_name}.cow', using as persistent."
-        else
-            msg ":: Creating '/run/artix/cowspace/${cow_directory}/${img_name}.cow' as persistent."
-            truncate -s "${cow_spacesize}" "/run/artix/cowspace/${cow_directory}/${img_name}.cow"
-        fi
-    else
-        if [[ -f "/run/artix/cowspace/${cow_directory}/${img_name}.cow" ]]; then
-            msg ":: Found '/run/artix/cowspace/${cow_directory}/${img_name}.cow' but non-persistent requested, removing."
-            rm -f "/run/artix/cowspace/${cow_directory}/${img_name}.cow"
-        fi
-        msg ":: Creating '/run/artix/cowspace/${cow_directory}/${img_name}.cow' as non-persistent."
-        truncate -s "${cow_spacesize}" "/run/artix/cowspace/${cow_directory}/${img_name}.cow"
-    fi
-
-    rw_dev=$(losetup --find --show "/run/artix/cowspace/${cow_directory}/${img_name}.cow")
-    echo ${rw_dev} >> /run/artix/used_block_devices
-
-    dmsetup create ${dm_snap_name} --table "0 ${ro_dev_size} snapshot ${ro_dev} ${rw_dev} ${cow_persistent} ${cow_chunksize}"
-
-    if [[ "${cow_persistent}" != "P" ]]; then
-        rm -f "/run/artix/cowspace/${cow_directory}/${img_name}.cow"
-    fi
-
-    _mnt_dev "/dev/mapper/${dm_snap_name}" "${mnt}" "-w" "defaults"
-    echo $(readlink -f /dev/mapper/${dm_snap_name}) >> /run/artix/used_block_devices
-}
-
-# args: source, newroot, mountpoint
-_mnt_overlayfs() {
-    local src="${1}"
-    local newroot="${2}"
-    local mnt="${3}"
-    local work_dir="/run/artix/overlay_root/work"
-    local upper_dir="/run/artix/overlay_root/upper"
-
-    mkdir -p "${upper_dir}" "${work_dir}"
-
-    mount -t overlay overlay -o lowerdir="${src}",upperdir="${upper_dir}",workdir="${work_dir}" "${newroot}${mnt}"
-}
-
-# args: /path/to/image_file, mountpoint
-_mnt_sfs() {
-    local img="${1}"
-    local mnt="${2}"
-    local img_fullname="${img##*/}"
-    local sfs_dev
-    local oper=$( [[ -n "${ip}" && -n "${miso_http_srv}" ]] && echo "mv" || echo "cp" )
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg -n ":: Copying squashfs image to RAM..."
-        if ! "${oper}" "${img}" "/run/artix/copytoram/${img_fullname}" ; then
-            echo "ERROR: while copy '${img}' to '/run/artix/copytoram/${img_fullname}'"
-            launch_interactive_shell
-        fi
-        img="/run/artix/copytoram/${img_fullname}"
-        msg "done."
-    fi
-    sfs_dev=$(losetup --find --show --read-only "${img}")
-    echo ${sfs_dev} >> /run/artix/used_block_devices
-    _mnt_dev "${sfs_dev}" "${mnt}" "-r" "defaults"
-}
-
-# args: device, mountpoint, flags, opts
-_mnt_dev() {
-    local dev="${1}"
-    local mnt="${2}"
-    local flg="${3}"
-    local opts="${4}"
-
-    mkdir -p "${mnt}"
-
-    msg ":: Mounting '${dev}' to '${mnt}'"
-
-    while ! poll_device "${dev}" 30; do
-        echo "ERROR: '${dev}' device did not show up after 30 seconds..."
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    done
-
-    if mount -o "${opts}" "${flg}" "${dev}" "${mnt}"; then
-        msg ":: Device '${dev}' mounted successfully."
-    else
-        echo "ERROR; Failed to mount '${dev}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-}
-
-_verify_checksum() {
-    local _status
-    cd "/run/artix/bootmnt/${artixbasedir}/${arch}"
-    sha512sum -c $1.sha512 > /tmp/checksum.log 2>&1
-    _status=$?
-    cd "${OLDPWD}"
-    return ${_status}
-}
-
-_verify_signature() {
-    local _status
-    cd "/run/artix/bootmnt/${artixbasedir}/${arch}"
-    gpg --homedir /gpg --status-fd 1 --verify $1.sfs.sig 2>/dev/null | grep -qE '^\[GNUPG:\] GOODSIG'
-    _status=$?
-    cd "${OLDPWD}"
-    return ${_status}
-}
-
-run_hook() {
-    [[ -z "${arch}" ]] && arch="$(uname -m)"
-    [[ -z "${copytoram_size}" ]] && copytoram_size="75%"
-    [[ -z "${artixbasedir}" ]] && artixbasedir="artix"
-
-    [[ -z "${dm_snap_prefix}" ]] && dm_snap_prefix="arch"
-    [[ -z "${artixdevice}" ]] && artixdevice="/dev/disk/by-label/${artixlabel}"
-    [[ -z "${cow_spacesize}" ]] && cow_spacesize="256M"
-    [[ -z "${overlay_root_size}" ]] && overlay_root_size="75%"
-
-    if [[ -n "${cow_label}" ]]; then
-        cow_device="/dev/disk/by-label/${cow_label}"
-        [[ -z "${cow_persistent}" ]] && cow_persistent="P"
-    elif [[ -n "${cow_device}" ]]; then
-        [[ -z "${cow_persistent}" ]] && cow_persistent="P"
-    else
-        cow_persistent="N"
-    fi
-
-    [[ -z "${cow_flags}" ]] && cow_flags="defaults"
-    [[ -z "${cow_directory}" ]] && cow_directory="persistent_${artixlabel}/${arch}"
-    [[ -z "${cow_chunksize}" ]] && cow_chunksize="8"
-
-    # set mount handler for artix
-    mount_handler="artix_mount_handler"
-}
-
-# This function is called normally from init script, but it can be called
-# as chain from other mount handlers.
-# args: /path/to/newroot
-artix_mount_handler() {
-    local newroot="${1}"
-
-    if ! mountpoint -q "/run/artix/bootmnt"; then
-        _mnt_dev "${artixdevice}" "/run/artix/bootmnt" "-r" "defaults"
-        if [[ "${copytoram}" != "y" ]]; then
-            echo $(readlink -f ${artixdevice}) >> /run/artix/used_block_devices
-        fi
-    fi
-
-    if [[ "${checksum}" == "y" ]]; then
-        for fs in rootfs desktopfs livefs;do
-            if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.sfs" ]]; then
-                if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.sha512" ]]; then
-                    msg -n ":: Self-test requested, please wait..."
-                    if _verify_checksum "${fs}"; then
-                        msg "done. Checksum is OK, continue booting."
-                    else
-                        echo "ERROR: one or more files are corrupted"
-                        echo "see /tmp/checksum.log for details"
-                        launch_interactive_shell
-                    fi
-                else
-                    echo "ERROR: checksum=y option specified but ${artixbasedir}/${arch}/${fs}.sha512 not found"
-                    launch_interactive_shell
-                fi
-            fi
-        done
-    fi
-
-    if [[ "${verify}" == "y" ]]; then
-        for fs in rootfs desktopfs livefs;do
-            if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.sfs" ]]; then
-                if [[ -f "/run/artix/bootmnt/${artixbasedir}/${arch}/${fs}.sfs.sig" ]]; then
-                    msg -n ":: Signature verification requested, please wait..."
-                    if _verify_signature "${fs}"; then
-                        msg "done. Signature is OK, continue booting."
-                    else
-                        echo "ERROR: one or more files are corrupted"
-                        launch_interactive_shell
-                    fi
-                else
-                    echo "ERROR: verify=y option specified but ${artixbasedir}/${arch}/${fs}.sfs.sig not found"
-                    launch_interactive_shell
-                fi
-            fi
-        done
-    fi
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg ":: Mounting /run/artix/copytoram (tmpfs) filesystem, size=${copytoram_size}"
-        mkdir -p /run/artix/copytoram
-        mount -t tmpfs -o "size=${copytoram_size}",mode=0755 copytoram /run/artix/copytoram
-    fi
-
-    if [[ -n "${cow_device}" ]]; then
-        _mnt_dev "${cow_device}" "/run/artix/cowspace" "-r" "${cow_flags}"
-        echo $(readlink -f ${cow_device}) >> /run/artix/used_block_devices
-        mount -o remount,rw "/run/artix/cowspace"
-    else
-        msg ":: Mounting /run/artix/cowspace (tmpfs) filesystem, size=${cow_spacesize}..."
-        mkdir -p /run/artix/cowspace
-        mount -t tmpfs -o "size=${cow_spacesize}",mode=0755 cowspace /run/artix/cowspace
-    fi
-    mkdir -p -m 0700 "/run/artix/cowspace/${cow_directory}"
-
-    msg -n ":: Mounting overlay root (tmpfs) filesystem, size=${overlay_root_size}..."
-    mkdir -p /run/artix/overlay_root
-    mount -t tmpfs -o "size=${overlay_root_size}",mode=0755 overlay_root /run/artix/overlay_root
-
-    local src="/run/artix/bootmnt/${artixbasedir}/${arch}"
-    local dest_sfs="/run/artix/sfs" dest_img="/run/artix/img"
-    local lower_dir
-
-    for sfs in livefs desktopfs rootfs;do
-        if [[ -f "${src}/${sfs}.sfs" ]]; then
-            _mnt_sfs "${src}/${sfs}.sfs" "${dest_sfs}/${sfs}"
-            if [[ -f "${dest_sfs}/${sfs}/${sfs}.img" ]]; then
-                mkdir -p ${dest_img}
-                lower_dir=${lower_dir:-}${lower_dir:+:}"${dest_img}/${sfs}"
-                _mnt_dmsnapshot "${dest_sfs}/${sfs}/${sfs}.img" "${dest_img}/${sfs}"
-            else
-                lower_dir=${lower_dir:-}${lower_dir:+:}"${dest_sfs}/${sfs}"
-            fi
-        fi
-    done
-
-    _mnt_overlayfs "${lower_dir}" "${newroot}" "/"
-
-    if [[ "${copytoram}" == "y" ]]; then
-        umount -d /run/artix/bootmnt
-        mkdir -p /run/artix/bootmnt/${artixbasedir}/${arch}
-        mount -o bind /run/artix/copytoram /run/artix/bootmnt/${artixbasedir}/${arch}
-    fi
-}
-
-# vim:ft=sh:ts=4:sw=4:et:

initcpio/hooks/artix_loop_mnt

@@ -1,35 +0,0 @@
-# vim: set ft=sh:
-
-run_hook () {
-    [[ -n "${img_label}" ]] && img_dev="/dev/disk/by-label/${img_label}"
-    [[ -z "${img_flags}" ]] && img_flags="defaults"
-    if [[ -n "${img_dev}" && -n "${img_loop}" ]]; then
-        mount_handler="artix_loop_mount_handler"
-    fi
-}
-
-artix_loop_mount_handler () {
-    newroot="${1}"
-
-    local _dev_loop
-
-    msg ":: Setup a loop device from ${img_loop} located at device ${img_dev}"
-    _mnt_dev "${img_dev}" "/run/artix/img_dev" "-r" "${img_flags}"
-    if [[ "${copytoram}" != "y" ]]; then
-        echo $(readlink -f ${img_dev}) >> /run/artix/used_block_devices
-    fi
-
-    if _dev_loop=$(losetup --find --show --read-only "/run/artix/img_dev/${img_loop}"); then
-        artixdevice="${_dev_loop}"
-    else
-        echo "ERROR: Setting loopback device for file '/run/artix/img_dev/${img_loop}'"
-        launch_interactive_shell
-    fi
-
-    artix_mount_handler ${newroot}
-
-    if [[ "${copytoram}" == "y" ]]; then
-        losetup -d ${_dev_loop} 2>/dev/null
-        umount /run/artix/img_dev
-    fi
-}

initcpio/hooks/artix_pxe_common

@@ -1,72 +0,0 @@
-# vim: set ft=sh:
-
-run_hook () {
-    # Do *not* declare 'bootif_dev' local! We need it in run_latehook().
-    local i net_mac bootif_mac
-    # These variables will be parsed from /tmp/net-*.conf generated by ipconfig
-    local DEVICE
-    local IPV4ADDR IPV4BROADCAST IPV4NETMASK IPV4GATEWAY IPV4DNS0 IPV4DNS1
-    local HOSTNAME DNSDOMAIN NISDOMAIN ROOTSERVER ROOTPATH
-    local filename
-    # /tmp/net-*.conf
-
-    if [[ -n "${ip}" ]]; then
-        if [[ -n "${BOOTIF}" ]]; then
-            bootif_mac=${BOOTIF#01-}
-            bootif_mac=${bootif_mac//-/:}
-            for i in /sys/class/net/*/address; do
-                read net_mac < ${i}
-                if [[ "${bootif_mac}" == "${net_mac}" ]]; then
-                    bootif_dev=${i#/sys/class/net/}
-                    bootif_dev=${bootif_dev%/address}
-                    break
-                fi
-            done
-            if [[ "${ip}" == "dhcp" ]]; then
-               ip=":::::${bootif_dev}:dhcp"
-            else
-               ip="${ip}::${bootif_dev}"
-           fi
-        fi
-
-        # setup network and save some values
-        if ! ipconfig -t 20 "ip=${ip}"; then
-                echo "ERROR; Failed to configure network"
-                echo "   Falling back to interactive prompt"
-                echo "   You can try to fix the problem manually, log out when you are finished"
-                launch_interactive_shell
-        fi
-
-        . /tmp/net-*.conf
-
-        pxeserver=${ROOTSERVER}
-
-        # setup DNS resolver
-        if [[ "${IPV4DNS0}" != "0.0.0.0" ]]; then
-            echo "# added by artix_pxe_common hook" > /etc/resolv.conf
-            echo "nameserver ${IPV4DNS0}" >> /etc/resolv.conf
-        fi
-        if [[ "${IPV4DNS1}" != "0.0.0.0" ]]; then
-            echo "nameserver ${IPV4DNS1}" >> /etc/resolv.conf
-        fi
-        if [[ -n "${DNSDOMAIN}" ]]; then
-            echo "search ${DNSDOMAIN}" >> /etc/resolv.conf
-            echo "domain ${DNSDOMAIN}" >> /etc/resolv.conf
-        fi
-    fi
-}
-
-run_latehook () {
-    if [[ -n "${ip}" ]]; then
-        [[ -z "${copy_resolvconf}" ]] && copy_resolvconf="y"
-
-        if [[ "${copytoram}" == "y" ]]; then
-            if [[ -n "${bootif_dev}" ]]; then
-                ip addr flush dev "${bootif_dev}"
-                ip link set "${bootif_dev}" down
-            fi
-        elif [[ "${copy_resolvconf}" != "n" && -f /etc/resolv.conf ]]; then
-            cp /etc/resolv.conf /new_root/etc/resolv.conf
-        fi
-    fi
-}

initcpio/hooks/artix_pxe_http

@@ -1,59 +0,0 @@
-# vim: set ft=sh:
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_http_srv}" ]]; then
-
-        # booting with http is always copy-to-ram, so set here to make sure
-        # addresses are flushed and interface is set down
-        copytoram="y"
-
-        artix_http_srv=$(eval echo ${artix_http_srv})
-        [[ -z "${artix_http_spc}" ]] && artix_http_spc="75%"
-
-        mount_handler="artix_pxe_http_mount_handler"
-    fi
-}
-
-# Fetch a file with CURL
-#
-# $1 URL
-# $2 Destination directory inside httpspace/${artixbasedir}
-_curl_get() {
-    local _url="${1}"
-    local _dst="${2}"
-
-    msg ":: Downloading '${_url}'"
-    if ! curl -L -f -o "/run/artix/httpspace/${artixbasedir}${_dst}/${_url##*/}" --create-dirs "${_url}"; then
-        echo "ERROR: Downloading '${_url}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-}
-
-artix_pxe_http_mount_handler () {
-    newroot="${1}"
-
-    msg ":: Mounting /run/artix/httpspace (tmpfs) filesystem, size='${artix_http_spc}'"
-    mkdir -p "/run/artix/httpspace"
-    mount -t tmpfs -o size="${artix_http_spc}",mode=0755 httpspace "/run/artix/httpspace"
-
-    local _src=${artix_http_srv}${artixbasedir}/${arch}
-
-    for sfs in livefs desktopfs rootfs;do
-        if [[ ! -z "$( curl -s --head "${_src}/${sfs}.sfs" | grep "OK" )" ]]; then
-            _curl_get "${_src}/${sfs}.sfs" "/${arch}"
-
-            if [[ "${checksum}" == "y" ]]; then
-                _curl_get "${_src}/${sfs}.md5" "/${arch}"
-            fi
-            if [[ "${verify}" == "y" ]]; then
-                _curl_get "${_src}/${sfs}.sfs.sig" "/${arch}"
-            fi
-        fi
-    done
-    mkdir -p "/run/artix/bootmnt"
-    mount -o bind /run/artix/httpspace /run/artix/bootmnt
-
-    artix_mount_handler ${newroot}
-}

initcpio/hooks/artix_pxe_nbd

@@ -1,47 +0,0 @@
-# vim: set ft=sh:
-
-run_earlyhook() {
-    if [[ -n "${ip}" && -n "${artix_nbd_srv}" ]]; then
-        # Module autoloading like with loop devices does not work, doing manually...
-        modprobe nbd 2> /dev/null
-    fi
-}
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_nbd_srv}" ]]; then
-
-        artix_nbd_srv=$(eval echo ${artix_nbd_srv})
-        [[ -z "${artix_nbd_name}" ]] && artix_nbd_name="artix"
-
-        mount_handler="artix_pxe_nbd_mount_handler"
-    fi
-}
-
-artix_pxe_nbd_mount_handler () {
-    newroot="${1}"
-
-    msg ":: Waiting for boot device..."
-    while ! poll_device /dev/nbd0 30; do
-        echo "ERROR: boot device didn't show up after 30 seconds..."
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    done
-
-    msg ":: Setup NBD from ${artix_nbd_srv} at /dev/nbd0"
-    if [[ "${copytoram}" != "n" ]]; then
-        nbd-client ${artix_nbd_srv} -N ${artix_nbd_name} /dev/nbd0
-        copytoram="y"
-    else
-        nbd-client ${artix_nbd_srv} -N ${artix_nbd_name} -persist /dev/nbd0
-    fi
-
-    artixdevice=/dev/nbd0
-
-    artix_mount_handler ${newroot}
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg ":: Disconnect NBD from ${artix_nbd_srv} at /dev/nbd0"
-        nbd-client -d /dev/nbd0
-    fi
-}

initcpio/hooks/artix_pxe_nfs

@@ -1,30 +0,0 @@
-# vim: set ft=sh:
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_nfs_srv}" ]]; then
-
-        artix_nfs_srv=$(eval echo ${artix_nfs_srv})
-        [[ -n "${artix_nfs_opt}" ]] && artix_nfs_opt="-o ${artix_nfs_opt}"
-
-        mount_handler="artix_nfs_mount_handler"
-    fi
-}
-
-artix_nfs_mount_handler() {
-    newroot="${1}"
-    mkdir -p "/run/artix/bootmnt"
-    msg ":: Mounting '${artix_nfs_srv}'"
-    # Do not put "${artix_nfs_opt}" nfsmount fails!
-    if ! nfsmount ${artix_nfs_opt} "${artix_nfs_srv}" "/run/artix/bootmnt"; then
-        echo "ERROR: Mounting '${artix_nfs_srv}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-
-    if [[ "${copytoram}" != "n" ]]; then
-        copytoram="y"
-    fi
-
-    artix_mount_handler ${newroot}
-}

initcpio/hooks/artix_shutdown

@@ -1,6 +0,0 @@
-run_cleanuphook() {
-    rm -rf /usr/lib/modules
-    cp -ax / /run/initramfs
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix

@@ -1,30 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "cdrom"
-    add_module "loop"
-    add_module "dm-snapshot"
-    add_module "overlay"
-
-    add_runscript
-
-    add_binary /usr/lib/udev/cdrom_id
-    add_binary blockdev
-    add_binary dmsetup
-    add_binary losetup
-    add_binary mountpoint
-    add_binary truncate
-    add_binary gpg
-    add_binary grep
-
-    add_file /usr/lib/udev/rules.d/60-cdrom_id.rules
-    add_file /usr/lib/udev/rules.d/10-dm.rules
-    add_file /usr/lib/udev/rules.d/95-dm-notify.rules
-    add_file /usr/lib/initcpio/udev/11-dm-initramfs.rules /usr/lib/udev/rules.d/11-dm-initramfs.rules
-    if [[ $ARTIX_GNUPG_FD ]]; then
-        mkdir -p "$BUILDROOT$dest"/gpg
-        gpg --homedir "$BUILDROOT$dest"/gpg --import <&$ARTIX_GNUPG_FD
-    fi
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_kms

@@ -1,16 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "radeon"
-    add_module "nouveau"
-    add_module "i915"
-    add_module "via-agp"
-    add_module "sis-agp"
-    add_module "intel-agp"
-}
-
-help() {
-    cat << HELPEOF
-Adds all common KMS drivers to the initramfs image.
-HELPEOF
-}

initcpio/install/artix_loop_mnt

@@ -1,13 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_runscript
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via loop device.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_common

@@ -1,26 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_checked_modules -f "(irda|phy|wimax|wireless|ppp_|plip|pppoe)" "/drivers/net/"
-
-    add_runscript
-
-    add_binary /usr/lib/initcpio/ipconfig /bin/ipconfig
-
-    # Add hosts support files+dns
-    add_symlink /usr/lib/libnss_files.so.2 $(readlink /usr/lib/libnss_files.so.2)
-    add_binary $(readlink -f /usr/lib/libnss_files.so.2)
-    add_symlink /usr/lib/libnss_dns.so.2 $(readlink /usr/lib/libnss_dns.so.2)
-    add_binary $(readlink -f /usr/lib/libnss_dns.so.2)
-
-    add_dir /etc
-    echo "hosts: files dns" > $BUILDROOT/etc/nsswitch.conf
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_http

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_runscript
-
-    add_binary curl
-
-    add_file $(readlink -f /etc/ssl/certs/ca-certificates.crt) /etc/ssl/certs/ca-certificates.crt
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE and HTTP.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_nbd

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "nbd"
-
-    add_runscript
-
-    add_binary nbd-client
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE and NBD.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_nfs

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "nfs"
-
-    add_runscript
-
-    add_binary /usr/lib/initcpio/nfsmount /bin/nfsmount
-}
-
-help() {
-    cat <<HELPEOF
-  This hook loads the necessary modules for boot via PXE and NFS.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_shutdown

@@ -1,20 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_binary cp
-
-    add_runscript
-
-    add_file /etc/initcpio/artix_shutdown /shutdown
-}
-
-help() {
-    cat <<HELPEOF
-This hook will create a shutdown initramfs in /run/initramfs
-that we can pivot to on shutdown in order to unmount / and
-and others mount points, dm-snapshot devices and loopback devices.
-Mostly usefull for dm-snapshot persistent.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/script/artix_shutdown

@@ -1,38 +0,0 @@
-#!/bin/ash
-
-# /oldroot depends on things inside /oldroot/run/artix...
-mkdir /oldrun
-mount -n --move /oldroot/run /oldrun
-
-# Unmount all mounts now.
-#umount $(mount | awk '$3 ~/^\/oldroot/ {print $3}' | sort -r)
-umount $(mount | awk '$3 ~/^\/oldroot/ {if($3 != "/run/artix/bootmnt") print $3}' | sort -r)
-
-# Remove all dm-snapshot devices.
-dmsetup remove_all
-
-# Remove all loopback devices.
-for _lup in $(grep ^/dev/loop /oldrun/artix/used_block_devices | tac); do
-    if ! losetup -d ${_lup} 2> /dev/null; then
-        umount -d ${_lup}
-    fi
-done
-
-# Unmount the space used to store *.cow.
-umount /oldrun/artix/cowspace
-
-# Unmount boot device if needed (no copytoram=y used)
-if [[ ! -d /oldrun/artix/copytoram ]]; then
-    if [[ -d /oldrun/artix/img_dev ]]; then
-        umount /oldrun/artix/img_dev
-    else
-        umount /oldrun/artix/bootmnt
-    fi
-fi
-
-# reboot / poweroff / halt, depending on the argument passed by init
-# if something invalid is passed, we halt
-case "$1" in
-  reboot|poweroff|halt) "$1" -f ;;
-  *) halt -f;;
-esac

lib/util-chroot.sh

@@ -1,56 +0,0 @@
-#!/bin/bash
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-is_btrfs() {
-    [[ -e "$1" && "$(stat -f -c %T "$1")" == btrfs ]]
-}
-
-is_subvolume() {
-    [[ -e "$1" && "$(stat -f -c %T "$1")" == btrfs && "$(stat -c %i "$1")" == 256 ]]
-}
-
-is_same_fs() {
-    [[ "$(stat -c %d "$1")" == "$(stat -c %d "$1")" ]]
-}
-
-subvolume_delete_recursive() {
-    local subvol
-
-    is_subvolume "$1" || return 0
-
-    while IFS= read -d $'\0' -r subvol; do
-        if ! subvolume_delete_recursive "$subvol"; then
-            return 1
-        fi
-    done < <(find "$1" -mindepth 1 -xdev -depth -inum 256 -print0)
-    if ! btrfs subvolume delete "$1" &>/dev/null; then
-        error "Unable to delete subvolume %s" "$subvol"
-        return 1
-    fi
-
-    return 0
-}
-
-# $1: chroot
-kill_chroot_process(){
-    local prefix="$1" flink pid name
-    for root_dir in /proc/*/root; do
-        flink=$(readlink $root_dir)
-        if [ "x$flink" != "x" ]; then
-            if [ "x${flink:0:${#prefix}}" = "x$prefix" ]; then
-                # this process is in the chroot...
-                pid=$(basename $(dirname "$root_dir"))
-                name=$(ps -p $pid -o comm=)
-                info "Killing chroot process: %s (%s)" "$name" "$pid"
-                kill -9 "$pid"
-            fi
-        fi
-    done
-}

lib/util-fstab.sh

@@ -1,207 +0,0 @@
-#!/bin/bash
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-declare -A pseudofs_types=([anon_inodefs]=1
-                        [autofs]=1
-                        [bdev]=1
-                        [binfmt_misc]=1
-                        [cgroup]=1
-                        [cgroup2]=1
-                        [configfs]=1
-                        [cpuset]=1
-                        [debugfs]=1
-                        [devfs]=1
-                        [devpts]=1
-                        [devtmpfs]=1
-                        [dlmfs]=1
-                        [fuse.gvfs-fuse-daemon]=1
-                        [fusectl]=1
-                        [hugetlbfs]=1
-                        [mqueue]=1
-                        [nfsd]=1
-                        [none]=1
-                        [pipefs]=1
-                        [proc]=1
-                        [pstore]=1
-                        [ramfs]=1
-                        [rootfs]=1
-                        [rpc_pipefs]=1
-                        [securityfs]=1
-                        [sockfs]=1
-                        [spufs]=1
-                        [sysfs]=1
-                        [tmpfs]=1)
-
-declare -A fsck_types=([cramfs]=1
-                    [exfat]=1
-                    [ext2]=1
-                    [ext3]=1
-                    [ext4]=1
-                    [ext4dev]=1
-                    [jfs]=1
-                    [minix]=1
-                    [msdos]=1
-                    [reiserfs]=1
-                    [vfat]=1
-                    [xfs]=1)
-
-fstype_is_pseudofs() {
-    (( pseudofs_types["$1"] ))
-}
-
-fstype_has_fsck() {
-    (( fsck_types["$1"] ))
-}
-
-valid_number_of_base() {
-    local base=$1 len=${#2} i=
-
-    for (( i = 0; i < len; i++ )); do
-        { _=$(( $base#${2:i:1} )) || return 1; } 2>/dev/null
-    done
-
-    return 0
-}
-
-mangle() {
-    local i= chr= out=
-
-    local {a..f}= {A..F}=
-
-    for (( i = 0; i < ${#1}; i++ )); do
-        chr=${1:i:1}
-        case $chr in
-            [[:space:]\\])
-                printf -v chr '%03o' "'$chr"
-                out+=\\
-            ;;
-        esac
-        out+=$chr
-    done
-
-    printf '%s' "$out"
-}
-
-unmangle() {
-    local i= chr= out= len=$(( ${#1} - 4 ))
-
-    local {a..f}= {A..F}=
-
-    for (( i = 0; i < len; i++ )); do
-        chr=${1:i:1}
-        case $chr in
-            \\)
-                if valid_number_of_base 8 "${1:i+1:3}" ||
-                    valid_number_of_base 16 "${1:i+1:3}"; then
-                    printf -v chr '%b' "${1:i:4}"
-                    (( i += 3 ))
-                fi
-            ;;
-        esac
-        out+=$chr
-    done
-
-    printf '%s' "$out${1:i}"
-}
-
-dm_name_for_devnode() {
-    read dm_name <"/sys/class/block/${1#/dev/}/dm/name"
-    if [[ $dm_name ]]; then
-        printf '/dev/mapper/%s' "$dm_name"
-    else
-        # don't leave the caller hanging, just print the original name
-        # along with the failure.
-        print '%s' "$1"
-        error 'Failed to resolve device mapper name for: %s' "$1"
-    fi
-}
-
-optstring_match_option() {
-    local candidate pat patterns
-
-    IFS=, read -ra patterns <<<"$1"
-    for pat in "${patterns[@]}"; do
-        if [[ $pat = *=* ]]; then
-            # "key=val" will only ever match "key=val"
-            candidate=$2
-        else
-            # "key" will match "key", but also "key=anyval"
-            candidate=${2%%=*}
-        fi
-
-        [[ $pat = "$candidate" ]] && return 0
-    done
-
-    return 1
-}
-
-optstring_remove_option() {
-    local o options_ remove=$2 IFS=,
-
-    read -ra options_ <<<"${!1}"
-
-    for o in "${!options_[@]}"; do
-        optstring_match_option "$remove" "${options_[o]}" && unset 'options_[o]'
-    done
-
-    declare -g "$1=${options_[*]}"
-}
-
-optstring_normalize() {
-    local o options_ norm IFS=,
-
-    read -ra options_ <<<"${!1}"
-
-    # remove empty fields
-    for o in "${options_[@]}"; do
-        [[ $o ]] && norm+=("$o")
-    done
-
-    # avoid empty strings, reset to "defaults"
-    declare -g "$1=${norm[*]:-defaults}"
-}
-
-optstring_append_option() {
-    if ! optstring_has_option "$1" "$2"; then
-        declare -g "$1=${!1},$2"
-    fi
-
-    optstring_normalize "$1"
-}
-
-optstring_prepend_option() {
-    local options_=$1
-
-    if ! optstring_has_option "$1" "$2"; then
-        declare -g "$1=$2,${!1}"
-    fi
-
-    optstring_normalize "$1"
-}
-
-optstring_get_option() {
-    local opts o
-
-    IFS=, read -ra opts <<<"${!1}"
-    for o in "${opts[@]}"; do
-        if optstring_match_option "$2" "$o"; then
-            declare -g "$o"
-            return 0
-        fi
-    done
-
-    return 1
-}
-
-optstring_has_option() {
-    local "${2%%=*}"
-
-    optstring_get_option "$1" "$2"
-}

lib/util-iso-grub.sh

@@ -1,113 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-
-prepare_initcpio(){
-    msg2 "Copying initcpio ..."
-    local dest="$1"
-    cp /etc/initcpio/hooks/artix* $dest/etc/initcpio/hooks
-    cp /etc/initcpio/install/artix* $dest/etc/initcpio/install
-    cp /etc/initcpio/artix_shutdown $dest/etc/initcpio
-}
-
-prepare_initramfs(){
-    local mnt="$1"
-    cp ${DATADIR}/mkinitcpio.conf $mnt/etc/mkinitcpio-artix.conf
-
-    if [[ "${PROFILE}" != 'base' ]];then
-        sed -e 's/artix_pxe_common artix_pxe_http artix_pxe_nbd artix_pxe_nfs //' -i $mnt/etc/mkinitcpio-artix.conf
-    fi
-
-    if [[ -n ${GPG_KEY} ]]; then
-        user_run "gpg --export ${GPG_KEY} >${AT_USERCONFDIR}/gpgkey"
-        exec 17<>${AT_USERCONFDIR}/GPG_KEY
-    fi
-    local _kernel=$(cat $mnt/usr/lib/modules/*/version)
-    ARTIX_GNUPG_FD=${GPG_KEY:+17} chroot-run $mnt \
-        /usr/bin/mkinitcpio -k ${_kernel} \
-        -c /etc/mkinitcpio-artix.conf \
-        -g /boot/initramfs.img
-
-    if [[ -n ${GPG_KEY} ]]; then
-        exec 17<&-
-    fi
-    if [[ -f ${AT_USERCONFDIR}/GPG_KEY ]]; then
-        rm ${AT_USERCONFDIR}/GPG_KEY
-    fi
-}
-
-prepare_boot_extras(){
-    local src="$1" dest="$2"
-
-    for u in intel amd;do
-        cp $src/boot/$u-ucode.img $dest/$u-ucode.img
-        cp $src/usr/share/licenses/$u-ucode/LICENSE $dest/$u-ucode.LICENSE
-    done
-
-    cp $src/boot/memtest86+/memtest.bin $dest/memtest
-    cp $src/usr/share/licenses/common/GPL2/license.txt $dest/memtest.COPYING
-}
-
-configure_grub(){
-    local conf="$1/boot/grub/kernels.cfg"
-    sed -e "s|@iso_label@|${iso_label}|" -i $conf
-}
-
-prepare_grub(){
-    local platform=i386-pc img='core.img' grub=$3/boot/grub efi=$3/efi/boot \
-        lib=$1/usr/lib/grub prefix=/boot/grub theme=$2/usr/share/grub
-
-    prepare_dir ${grub}/${platform}
-
-    cp ${theme}/cfg/*.cfg ${grub}
-
-    cp ${lib}/${platform}/* ${grub}/${platform}
-
-    msg2 "Building %s ..." "${img}"
-
-    grub-mkimage -d ${grub}/${platform} -o ${grub}/${platform}/${img} -O ${platform} -p ${prefix} biosdisk iso9660
-
-    cat ${grub}/${platform}/cdboot.img ${grub}/${platform}/${img} > ${grub}/${platform}/eltorito.img
-
-    platform=x86_64-efi
-    img=bootx64.efi
-
-    prepare_dir ${efi}
-    prepare_dir ${grub}/${platform}
-
-    cp ${lib}/${platform}/* ${grub}/${platform}
-
-    msg2 "Building %s ..." "${img}"
-
-    grub-mkimage -d ${grub}/${platform} -o ${efi}/${img} -O ${platform} -p ${prefix} iso9660
-
-    prepare_dir ${grub}/themes
-    cp -r ${theme}/themes/artix ${grub}/themes/
-    cp -r ${theme}/{locales,tz} ${grub}
-
-    if [[ -f /usr/share/grub/unicode.pf2 ]];then
-        msg2 "Copying %s ..." "unicode.pf2"
-        cp /usr/share/grub/unicode.pf2 ${grub}/unicode.pf2
-    else
-        msg2 "Creating %s ..." "unicode.pf2"
-        grub-mkfont -o ${grub}/unicode.pf2 /usr/share/fonts/misc/unifont.bdf
-    fi
-
-    local size=4M mnt="${mnt_dir}/efiboot" efi_img="$3/efi.img"
-    msg2 "Creating fat image of %s ..." "${size}"
-    truncate -s ${size} "${efi_img}"
-    mkfs.fat -n ARTIX_EFI "${efi_img}" &>/dev/null
-    prepare_dir "${mnt}"
-    mount_img "${efi_img}" "${mnt}"
-    prepare_dir ${mnt}/efi/boot
-    msg2 "Building %s ..." "${img}"
-    grub-mkimage -d ${grub}/${platform} -o ${mnt}/efi/boot/${img} -O ${platform} -p ${prefix} iso9660
-    umount_img "${mnt}"
-}

lib/util-iso-profile.sh

@@ -1,126 +0,0 @@
-#!/bin/bash
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-init_profile(){
-    local profdir="$1" prof="$2"
-
-    ROOT_LIST="$profdir/base/Packages-Root"
-    ROOT_OVERLAY="$profdir/base/root-overlay"
-    LIVE_LIST="$profdir/base/Packages-Live"
-    LIVE_OVERLAY="$profdir/base/live-overlay"
-
-    [[ -f "$profdir/$prof/Packages-Root" ]] && ROOT_LIST="$profdir/$prof/Packages-Root"
-    [[ -d "$profdir/$prof/root-overlay" ]] && ROOT_OVERLAY="$profdir/$prof/root-overlay"
-
-    [[ -f "$profdir/$prof/Packages-Desktop" ]] && DESKTOP_LIST="$profdir/$prof/Packages-Desktop"
-    [[ -d "$profdir/$prof/desktop-overlay" ]] && DESKTOP_OVERLAY="$profdir/$prof/desktop-overlay"
-
-    [[ -f "$profdir/$prof/Packages-Live" ]] && LIVE_LIST="$profdir/$prof/Packages-Live"
-    [[ -d "$profdir/$prof/live-overlay" ]] && LIVE_OVERLAY="$profdir/$prof/live-overlay"
-}
-
-show_profile(){
-    msg2 "iso_file: %s" "${iso_file}"
-    msg2 "AUTOLOGIN: %s" "${AUTOLOGIN}"
-    msg2 "HOST_NAME: %s" "${HOST_NAME}"
-    msg2 "USER_NAME: %s" "${USER_NAME}"
-    msg2 "PASSWORD: %s" "${PASSWORD}"
-    msg2 "ADDGROUPS: %s" "${ADDGROUPS}"
-    msg2 "SERVICES_LIVE: %s" "${SERVICES_LIVE[*]}"
-    msg2 "SERVICES: %s" "${SERVICES[*]}"
-}
-
-load_profile(){
-    local prof="$1"
-    local profdir="${DATADIR}/iso-profiles"
-    [[ -d ${WORKSPACE_DIR}/iso-profiles ]] && profdir=${WORKSPACE_DIR}/iso-profiles
-
-    init_profile "$profdir" "$prof"
-
-    [[ -f $profdir/$prof/profile.conf ]] || return 1
-
-    [[ -r $profdir/$prof/profile.conf ]] && source $profdir/$prof/profile.conf
-
-    [[ -z ${DISPLAYMANAGER} ]] && DISPLAYMANAGER="none"
-
-    [[ -z ${AUTOLOGIN} ]] && AUTOLOGIN="true"
-    [[ ${DISPLAYMANAGER} == 'none' ]] && AUTOLOGIN="false"
-
-    [[ -z ${HOST_NAME} ]] && HOST_NAME="artix"
-
-    [[ -z ${USER_NAME} ]] && USER_NAME="artix"
-
-    [[ -z ${PASSWORD} ]] && PASSWORD="artix"
-
-    if [[ -z ${ADDGROUPS} ]];then
-        ADDGROUPS="video,power,storage,optical,network,lp,scanner,wheel,users,log"
-    fi
-
-    if [[ -z ${SERVICES[@]} ]];then
-        SERVICES=('acpid' 'bluetooth' 'cronie' 'cupsd' 'syslog-ng' 'NetworkManager')
-    fi
-
-    if [[ ${DISPLAYMANAGER} != "none" ]];then
-        case "${INITSYS}" in
-            'openrc') SERVICES+=('xdm') ;;
-            'runit') SERVICES+=("${DISPLAYMANAGER}") ;;
-        esac
-    fi
-
-    if [[ -z ${SERVICES_LIVE[@]} ]];then
-        SERVICES_LIVE=('artix-live' 'pacman-init')
-    fi
-
-    return 0
-}
-
-write_live_session_conf(){
-    local path=$1${SYSCONFDIR}
-    [[ ! -d $path ]] && mkdir -p "$path"
-    local conf=$path/live.conf
-    msg2 "Writing %s" "${conf##*/}"
-    echo '# live session configuration' > ${conf}
-    echo '' >> ${conf}
-    echo '# autologin' >> ${conf}
-    echo "AUTOLOGIN=${AUTOLOGIN}" >> ${conf}
-    echo '' >> ${conf}
-    echo '# live user name' >> ${conf}
-    echo "USERNAME=${USERNAME}" >> ${conf}
-    echo '' >> ${conf}
-    echo '# live password' >> ${conf}
-    echo "PASSWORD=${PASSWORD}" >> ${conf}
-    echo '' >> ${conf}
-    echo '# live group membership' >> ${conf}
-    echo "ADDGROUPS='${ADDGROUPS}'" >> ${conf}
-}
-
-load_pkgs(){
-    local pkglist="$1" init="$2"
-    info "Loading Packages: [%s] ..." "${pkglist##*/}"
-
-    local _init="s|@$init||g"
-    case "$init" in
-        'openrc') _init_rm1="s|@runit.*||g"; _init_rm2="s|@s6*||g" ;;
-        's6') _init_rm1="s|@runit.*||g"; _init_rm2="s|@openrc.*||g" ;;
-        'runit') _init_rm1="s|@s6.*||g"; _init_rm2="s|@openrc.*||g" ;;
-    esac
-
-    local _space="s| ||g" \
-        _clean=':a;N;$!ba;s/\n/ /g' \
-        _com_rm="s|#.*||g"
-
-    packages=($(sed "$_com_rm" "$pkglist" \
-            | sed "$_space" \
-            | sed "$_purge" \
-            | sed "$_init" \
-            | sed "$_init_rm1" \
-            | sed "$_init_rm2" \
-            | sed "$_clean"))
-}

lib/util-iso-yaml.sh

@@ -1,84 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-write_users_conf(){
-    local conf="$1/users.conf"
-    msg2 "Writing %s ..." "${conf##*/}"
-    echo "---" > "$conf"
-    echo "defaultGroups:" >> "$conf"
-    local IFS=','
-    for g in ${ADDGROUPS[@]};do
-        echo "    - $g" >> "$conf"
-    done
-    unset IFS
-    echo "autologinGroup:  autologin" >> "$conf"
-    echo "doAutologin:     false" >> "$conf"
-    echo "sudoersGroup:    wheel" >> "$conf"
-    echo "setRootPassword: true" >> "$conf"
-    echo "availableShells: /bin/bash, /bin/zsh" >> "$conf" # only used in new 'users' module
-
-#     echo "passwordRequirements:" >> "$conf"
-#     echo "    minLength: -1" >> "$conf"
-#     echo "    maxLength: -1" >> "$conf"
-#     echo "    libpwquality:" >> "$conf"
-#     echo "        - minlen=8" >> "$conf"
-#     echo "        - minclass=80" >> "$conf"
-}
-
-write_servicescfg_conf(){
-    local init="$2"
-    local conf="$1"/services-"$init".conf
-    msg2 "Writing %s ..." "${conf##*/}"
-    echo '---' >  "$conf"
-    case "$init" in
-        'runit')
-            echo 'svDir: /etc/runit/sv' >> "$conf"
-            echo '' >> "$conf"
-            echo 'runsvDir: /etc/runit/runsvdir' >> "$conf"
-            echo '' >> "$conf"
-            echo 'services:' >> "$conf"
-            echo "    enabled:" >> "$conf"
-            for svc in ${SERVICES[@]};do
-                echo "      - name: $svc" >> "$conf"
-                echo '        runlevel: default' >> "$conf"
-            done
-        ;;
-        'openrc')
-            echo 'initdDir: /etc/init.d' >> "$conf"
-            echo '' >> "$conf"
-            echo 'runlevelsDir: /etc/runlevels' >> "$conf"
-            echo '' >> "$conf"
-            echo 'services:' >> "$conf"
-            for svc in ${SERVICES[@]};do
-                echo "      - name: $svc" >> "$conf"
-                echo '        runlevel: default' >> "$conf"
-            done
-        ;;
-    esac
-}
-
-write_postcfg_conf(){
-    local conf="$1/postcfg.conf" init="$2"
-    sed -e "s|openrc|$init|" -i "$conf"
-}
-
-configure_calamares(){
-    local mods="$1/etc/calamares/modules" init="$2"
-    if [[ -d "$mods" ]];then
-        info "Configuring [Calamares]"
-        write_users_conf "$mods"
-        write_servicescfg_conf "$mods" "$init"
-        write_postcfg_conf "$mods" "$init"
-        local name=services-"$init"
-        sed -e "s|services-openrc|$name|" -i "$1"/etc/calamares/settings.conf
-        info "Done configuring [Calamares]"
-    fi
-}

lib/util-iso.sh

@@ -1,556 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-import ${LIBDIR}/util-chroot.sh
-import ${LIBDIR}/util-iso-grub.sh
-import ${LIBDIR}/util-iso-yaml.sh
-import ${LIBDIR}/util-iso-profile.sh
-
-track_img() {
-    info "mount: [%s]" "$2"
-    mount "$@" && IMG_ACTIVE_MOUNTS=("$2" "${IMG_ACTIVE_MOUNTS[@]}")
-}
-
-mount_img() {
-    IMG_ACTIVE_MOUNTS=()
-    mkdir -p "$2"
-    track_img "$1" "$2"
-}
-
-umount_img() {
-    if [[ -n ${IMG_ACTIVE_MOUNTS[@]} ]];then
-        info "umount: [%s]" "${IMG_ACTIVE_MOUNTS[@]}"
-        umount "${IMG_ACTIVE_MOUNTS[@]}"
-        unset IMG_ACTIVE_MOUNTS
-        rm -r "$1"
-    fi
-}
-
-track_fs() {
-    info "overlayfs mount: [%s]" "$5"
-    mount "$@" && FS_ACTIVE_MOUNTS=("$5" "${FS_ACTIVE_MOUNTS[@]}")
-}
-
-mount_overlay(){
-    FS_ACTIVE_MOUNTS=()
-    local lower= upper="$1" work="$2" pkglist="$3"
-    local fs=${upper##*/}
-    local rootfs="$work/rootfs" desktopfs="$work/desktopfs" livefs="$work/livefs"
-    mkdir -p "${mnt_dir}/work"
-    mkdir -p "$upper"
-    case $fs in
-        desktopfs) lower="$rootfs" ;;
-        livefs)
-            lower="$rootfs"
-            [[ -f $pkglist ]] && lower="$desktopfs":"$rootfs"
-        ;;
-        bootfs)
-            lower="$livefs":"$rootfs"
-            [[ -f $pkglist ]] && lower="$livefs":"$desktopfs":"$rootfs"
-        ;;
-    esac
-    track_fs -t overlay overlay -olowerdir="$lower",upperdir="$upper",workdir="${mnt_dir}/work" "$upper"
-}
-
-umount_overlay(){
-    if [[ -n ${FS_ACTIVE_MOUNTS[@]} ]];then
-        info "overlayfs umount: [%s]" "${FS_ACTIVE_MOUNTS[@]}"
-        umount "${FS_ACTIVE_MOUNTS[@]}"
-        unset FS_ACTIVE_MOUNTS
-        rm -rf "${mnt_dir}/work"
-    fi
-}
-
-error_function() {
-    if [[ -p $logpipe ]]; then
-        rm "$logpipe"
-    fi
-    local func="$1"
-    # first exit all subshells, then print the error
-    if (( ! BASH_SUBSHELL )); then
-        error "A failure occurred in %s()." "$func"
-        plain "Aborting..."
-    fi
-    umount_overlay
-    umount_img
-    exit 2
-}
-
-# $1: function
-run_log(){
-    local func="$1" log_dir='/var/log/artools'
-    [[ ! -d $log_dir ]] && mkdir -p $log_dir
-    local logfile=${log_dir}/$(gen_iso_fn).$func.log
-    logpipe=$(mktemp -u "/tmp/$func.pipe.XXXXXXXX")
-    mkfifo "$logpipe"
-    tee "$logfile" < "$logpipe" &
-    local teepid=$!
-    $func &> "$logpipe"
-    wait $teepid
-    rm "$logpipe"
-}
-
-run_safe() {
-    local restoretrap func="$1"
-    set -e
-    set -E
-    restoretrap=$(trap -p ERR)
-    trap 'error_function $func' ERR
-
-    if ${log};then
-        run_log "$func"
-    else
-        "$func"
-    fi
-
-    eval $restoretrap
-    set +E
-    set +e
-}
-
-trap_exit() {
-    local sig=$1; shift
-    error "$@"
-    umount_overlay
-    trap -- "$sig"
-    kill "-$sig" "$$"
-}
-
-prepare_traps(){
-    for sig in TERM HUP QUIT; do
-        trap "trap_exit $sig \"$(gettext "%s signal caught. Exiting...")\" \"$sig\"" "$sig"
-    done
-    trap 'trap_exit INT "$(gettext "Aborted by user! Exiting...")"' INT
-#     trap 'trap_exit USR1 "$(gettext "An unknown error has occurred. Exiting...")"' ERR
-}
-
-add_svc_rc(){
-    local mnt="$1" name="$2" rlvl="$3"
-    if [[ -f $mnt/etc/init.d/$name ]];then
-        msg2 "Setting %s ..." "$name"
-        chroot $mnt rc-update add $name $rlvl &>/dev/null
-    fi
-}
-
-add_svc_runit(){
-    local mnt="$1" name="$2"
-    if [[ -d $mnt/etc/runit/sv/$name ]]; then
-        msg2 "Setting %s ..." "$name"
-        chroot $mnt ln -s /etc/runit/sv/$name /etc/runit/runsvdir/default &>/dev/null
-    fi
-}
-
-set_xdm(){
-    if [[ -f $1/etc/conf.d/xdm ]];then
-        local conf='DISPLAYMANAGER="'${DISPLAYMANAGER}'"'
-        sed -i -e "s|^.*DISPLAYMANAGER=.*|${conf}|" $1/etc/conf.d/xdm
-    fi
-}
-
-configure_hosts(){
-    sed -e "s|localhost.localdomain|localhost.localdomain ${HOST_NAME}|" -i $1/etc/hosts
-}
-
-configure_logind(){
-    local conf=$1/etc/$2/logind.conf
-    if [[ -e $conf ]];then
-        msg2 "Configuring logind ..."
-        sed -i 's/#\(HandleSuspendKey=\)suspend/\1ignore/' "$conf"
-        sed -i 's/#\(HandleLidSwitch=\)suspend/\1ignore/' "$conf"
-        sed -i 's/#\(HandleHibernateKey=\)hibernate/\1ignore/' "$conf"
-    fi
-}
-
-configure_services(){
-    local mnt="$1"
-    info "Configuring [%s]" "${INITSYS}"
-    case ${INITSYS} in
-        'openrc')
-            for svc in ${SERVICES[@]}; do
-                [[ $svc == "xdm" ]] && set_xdm "$mnt"
-                add_svc_rc "$mnt" "$svc" "default"
-            done
-            for svc in ${SERVICES_LIVE[@]}; do
-                add_svc_rc "$mnt" "$svc" "default"
-            done
-        ;;
-        'runit')
-            for svc in ${SERVICES[@]}; do
-                add_svc_runit "$mnt" "$svc"
-            done
-            for svc in ${SERVICES_LIVE[@]}; do
-                add_svc_runit "$mnt" "$svc"
-            done
-        ;;
-    esac
-    info "Done configuring [%s]" "${INITSYS}"
-}
-
-configure_system(){
-    local mnt="$1"
-    case ${INITSYS} in
-        'openrc' | 'runit')
-            configure_logind "$mnt" "elogind"
-        ;;
-    esac
-    echo ${HOST_NAME} > $mnt/etc/hostname
-}
-
-clean_iso_root(){
-    local dest="$1"
-    msg "Deleting isoroot [%s] ..." "${dest##*/}"
-    rm -rf --one-file-system "$dest"
-}
-
-clean_up_image(){
-    local path mnt="$1"
-    msg2 "Cleaning [%s]" "${mnt##*/}"
-
-    if [[ -f "$mnt/etc/locale.gen.orig" ]];then
-        mv "$mnt/etc/locale.gen.orig" "$mnt/etc/locale.gen"
-        rm "$mnt/etc/locale.conf"
-    fi
-    path=$mnt/boot
-    if [[ -d "$path" ]]; then
-        find "$path" -name 'initramfs*.img' -delete &> /dev/null
-    fi
-    path=$mnt/var/lib/pacman/sync
-    if [[ -d $path ]];then
-        find "$path" -type f -delete &> /dev/null
-    fi
-    path=$mnt/var/cache/pacman/pkg
-    if [[ -d $path ]]; then
-        find "$path" -type f -delete &> /dev/null
-    fi
-    path=$mnt/var/log
-    if [[ -d $path ]]; then
-        find "$path" -type f -delete &> /dev/null
-    fi
-    path=$mnt/var/tmp
-    if [[ -d $path ]];then
-        find "$path" -mindepth 1 -delete &> /dev/null
-    fi
-    path=$mnt/tmp
-    if [[ -d $path ]];then
-        find "$path" -mindepth 1 -delete &> /dev/null
-    fi
-
-    if [[ ${mnt##*/} == 'livefs' ]];then
-        rm -rf "$mnt/etc/pacman.d/gnupg"
-    fi
-
-    find "$mnt" -name *.pacnew -name *.pacsave -name *.pacorig -delete
-    if [[ -f "$mnt/boot/grub/grub.cfg" ]]; then
-        rm $mnt/boot/grub/grub.cfg
-    fi
-    if [[ -f "$mnt/etc/machine-id" ]]; then
-        rm $mnt/etc/machine-id
-    fi
-}
-
-configure_live_image(){
-    local fs="$1"
-    msg "Configuring [livefs]"
-    configure_hosts "$fs"
-    configure_system "$fs"
-    configure_services "$fs"
-    configure_calamares "$fs" "${INITSYS}"
-    write_live_session_conf "$fs"
-    msg "Done configuring [livefs]"
-}
-
-make_sig () {
-    local idir="$1" file="$2"
-    msg2 "Creating signature file..."
-    cd "$idir"
-    user_own "$idir"
-    user_run "gpg --detach-sign --default-key ${GPG_KEY} $file.sfs"
-    chown -R root "$idir"
-    cd ${OLDPWD}
-}
-
-make_checksum(){
-    local idir="$1" file="$2"
-    msg2 "Creating sha512sum ..."
-    cd $idir
-    sha512sum $file.sfs > $file.sha512
-    cd ${OLDPWD}
-}
-
-# $1: image path
-make_sfs() {
-    local src="$1"
-    if [[ ! -e "${src}" ]]; then
-        error "The path %s does not exist" "${src}"
-        retrun 1
-    fi
-    local timer=$(get_timer) dest=${iso_root}/artix/${ARCH}
-    local name=${1##*/}
-    local sfs="${dest}/${name}.sfs"
-    mkdir -p ${dest}
-    msg "Generating SquashFS image for %s" "${src}"
-    if [[ -f "${sfs}" ]]; then
-        local has_changed_dir=$(find ${src} -newer ${sfs})
-        msg2 "Possible changes for %s ..." "${src}"  >> /tmp/buildiso.debug
-        msg2 "%s" "${has_changed_dir}" >> /tmp/buildiso.debug
-        if [[ -n "${has_changed_dir}" ]]; then
-            msg2 "SquashFS image %s is not up to date, rebuilding..." "${sfs}"
-            rm "${sfs}"
-        else
-            msg2 "SquashFS image %s is up to date, skipping." "${sfs}"
-            return
-        fi
-    fi
-
-    if ${persist};then
-        local size=32G
-        local mnt="${mnt_dir}/${name}"
-        msg2 "Creating ext4 image of %s ..." "${size}"
-        truncate -s ${size} "${src}.img"
-        local ext4_args=()
-        ext4_args+=(-O ^has_journal,^resize_inode -E lazy_itable_init=0 -m 0)
-        mkfs.ext4 ${ext4_args[@]} -F "${src}.img" &>/dev/null
-        tune2fs -c 0 -i 0 "${src}.img" &> /dev/null
-        mount_img "${work_dir}/${name}.img" "${mnt}"
-        msg2 "Copying %s ..." "${src}/"
-        cp -aT "${src}/" "${mnt}/"
-        umount_img "${mnt}"
-
-    fi
-
-    msg2 "Creating SquashFS image, this may take some time..."
-    local mksfs_args=()
-    if ${persist};then
-        mksfs_args+=(${work_dir}/${name}.img)
-    else
-        mksfs_args+=(${src})
-    fi
-
-    mksfs_args+=(${sfs} -noappend)
-
-    local highcomp="-b 256K -Xbcj x86" comp='xz'
-
-    mksfs_args+=(-comp ${comp} ${highcomp})
-
-    mksquashfs "${mksfs_args[@]}"
-
-    make_checksum "${dest}" "${name}"
-    ${persist} && rm "${src}.img"
-
-    if [[ -n ${GPG_KEY} ]];then
-        make_sig "${dest}" "${name}"
-    fi
-
-    show_elapsed_time "${FUNCNAME}" "${timer_start}"
-}
-
-assemble_iso(){
-    msg "Creating ISO image..."
-    local mod_date=$(date -u +%Y-%m-%d-%H-%M-%S-00  | sed -e s/-//g)
-
-    xorriso -as mkisofs \
-        --modification-date=${mod_date} \
-        --protective-msdos-label \
-        -volid "${iso_label}" \
-        -appid "$(get_osname) Live/Rescue CD" \
-        -publisher "$(get_osname) <$(get_disturl)>" \
-        -preparer "Prepared by artools/${0##*/}" \
-        -r -graft-points -no-pad \
-        --sort-weight 0 / \
-        --sort-weight 1 /boot \
-        --grub2-mbr ${iso_root}/boot/grub/i386-pc/boot_hybrid.img \
-        -partition_offset 16 \
-        -b boot/grub/i386-pc/eltorito.img \
-        -c boot.catalog \
-        -no-emul-boot -boot-load-size 4 -boot-info-table --grub2-boot-info \
-        -eltorito-alt-boot \
-        -append_partition 2 0xef ${iso_root}/efi.img \
-        -e --interval:appended_partition_2:all:: -iso_mbr_part_type 0x00 \
-        -no-emul-boot \
-        -iso-level 3 \
-        -o ${iso_dir}/${iso_file} \
-        ${iso_root}/
-}
-
-# Build ISO
-make_iso() {
-    msg "Start [Build ISO]"
-    touch "${iso_root}/.artix"
-    for sfs_dir in $(find "${work_dir}" -maxdepth 1 -type d); do
-        if [[ "${sfs_dir}" != "${work_dir}" ]]; then
-            make_sfs "${sfs_dir}"
-        fi
-    done
-
-    msg "Making bootable image"
-    # Sanity checks
-    [[ ! -d "${iso_root}" ]] && return 1
-    if [[ -f "${iso_dir}/${iso_file}" ]]; then
-        msg2 "Removing existing bootable image..."
-        rm -rf "${iso_dir}/${iso_file}"
-    fi
-    assemble_iso
-    msg "Done [Build ISO]"
-}
-
-gen_iso_fn(){
-    local vars=("artix") name
-    vars+=("${PROFILE}")
-    vars+=("${INITSYS}")
-    case "${REPOSITORY}" in
-        'gremlins'|'goblins') vars+=("${REPOSITORY}") ;;
-    esac
-    vars+=("${ISO_VERSION}")
-    vars+=("${ARCH}")
-    for n in ${vars[@]};do
-        name=${name:-}${name:+-}${n}
-    done
-    echo $name
-}
-
-install_packages(){
-    local fs="$1"
-    setarch "${ARCH}" mkchroot \
-        "${mkchroot_args[@]}" "${fs}" "${packages[@]}"
-}
-
-copy_overlay(){
-    local src="$1" dest="$2"
-    if [[ -e "$src" ]];then
-        msg2 "Copying [%s] ..." "${src##*/}"
-        cp -LR "$src"/* "$dest"
-    fi
-}
-
-make_rootfs() {
-    if [[ ! -e ${work_dir}/rootfs.lock ]]; then
-        msg "Prepare [Base installation] (rootfs)"
-        local rootfs="${work_dir}/rootfs"
-
-        prepare_dir "${rootfs}"
-
-        install_packages "${rootfs}"
-
-        copy_overlay "${ROOT_OVERLAY}" "${rootfs}"
-
-        clean_up_image "${rootfs}"
-
-        msg "Done [Base installation] (rootfs)"
-    fi
-}
-
-make_desktopfs() {
-    if [[ ! -e ${work_dir}/desktopfs.lock ]]; then
-        msg "Prepare [Desktop installation] (desktopfs)"
-        local desktopfs="${work_dir}/desktopfs"
-
-        prepare_dir "${desktopfs}"
-
-        mount_overlay "${desktopfs}" "${work_dir}"
-
-        install_packages "${desktopfs}"
-
-        copy_overlay "${DESKTOP_OVERLAY}" "${desktopfs}"
-
-        umount_overlay
-        clean_up_image "${desktopfs}"
-
-        msg "Done [Desktop installation] (desktopfs)"
-    fi
-}
-
-make_livefs() {
-    if [[ ! -e ${work_dir}/livefs.lock ]]; then
-        msg "Prepare [Live installation] (livefs)"
-        local livefs="${work_dir}/livefs"
-
-        prepare_dir "${livefs}"
-
-        mount_overlay "${livefs}" "${work_dir}" "${DESKTOP_LIST}"
-
-        install_packages "${livefs}"
-
-        copy_overlay "${LIVE_OVERLAY}" "${livefs}"
-
-        configure_live_image "${livefs}"
-
-        umount_overlay
-
-        clean_up_image "${livefs}"
-
-        msg "Done [Live installation] (livefs)"
-    fi
-}
-
-make_bootfs() {
-    if [[ ! -e ${work_dir}/bootfs.lock ]]; then
-        msg "Prepare [/iso/boot]"
-        local boot="${iso_root}/boot"
-
-        prepare_dir "${boot}"
-
-        cp ${work_dir}/rootfs/boot/vmlinuz* ${boot}/vmlinuz-${ARCH}
-
-        local bootfs="${work_dir}/bootfs"
-
-        mount_overlay "${bootfs}" "${work_dir}" "${DESKTOP_LIST}"
-
-        prepare_initcpio "${bootfs}"
-        prepare_initramfs "${bootfs}"
-
-        cp ${bootfs}/boot/initramfs.img ${boot}/initramfs-${ARCH}.img
-        prepare_boot_extras "${bootfs}" "${boot}"
-
-        umount_overlay
-
-        rm -R ${bootfs}
-        : > ${work_dir}/bootfs.lock
-        msg "Done [/iso/boot]"
-    fi
-}
-
-make_grub(){
-    if [[ ! -e ${work_dir}/grub.lock ]]; then
-        msg "Prepare [/iso/boot/grub]"
-
-        prepare_grub "${work_dir}/rootfs" "${work_dir}/livefs" "${iso_root}"
-
-        configure_grub "${iso_root}"
-
-        : > ${work_dir}/grub.lock
-        msg "Done [/iso/boot/grub]"
-    fi
-}
-
-compress_images(){
-    local timer=$(get_timer)
-    run_safe "make_iso"
-    user_own "${iso_dir}" "-R"
-    show_elapsed_time "${FUNCNAME}" "${timer}"
-}
-
-prepare_images(){
-    local timer=$(get_timer)
-    load_pkgs "${ROOT_LIST}" "${INITSYS}"
-    run_safe "make_rootfs"
-    if [[ -f "${DESKTOP_LIST}" ]] ; then
-        load_pkgs "${DESKTOP_LIST}" "${INITSYS}"
-        run_safe "make_desktopfs"
-    fi
-    if [[ -f ${LIVE_LIST} ]]; then
-        load_pkgs "${LIVE_LIST}" "${INITSYS}"
-        run_safe "make_livefs"
-    fi
-    run_safe "make_bootfs"
-    run_safe "make_grub"
-
-    show_elapsed_time "${FUNCNAME}" "${timer}"
-}

lib/util-mount.sh

@@ -1,142 +0,0 @@
-#!/bin/bash
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-ignore_error() {
-    "$@" 2>/dev/null
-    return 0
-}
-
-parse_fstab(){
-    echo $(perl -ane 'printf("%s:%s\n", @F[0,1]) if $F[0] =~ m#^UUID=#;' $1/etc/fstab)
-# 	perl -ane 'printf("%s:%s\n", @F[0,1]) if $F[0] =~ m#^/dev#;' $1/etc/fstab
-# 	perl -ane 'printf("%s:%s\n", @F[0,1]) if $F[0] =~ m#^LABEL=#;' $1/etc/fstab
-}
-
-detect(){
-    local detected="$(os-prober | tr ' ' '_' | paste -s -d ' ')"
-    echo ${detected}
-}
-
-# $1: os-prober array
-get_os_name(){
-    local str=$1
-    str="${str#*:}"
-    str="${str#*:}"
-    str="${str%:*}"
-    echo "$str"
-}
-
-chroot_part_mount() {
-    info "mount: [%s]" "$2"
-    mount "$@" && CHROOT_ACTIVE_PART_MOUNTS=("$2" "${CHROOT_ACTIVE_PART_MOUNTS[@]}")
-}
-
-trap_setup(){
-    [[ $(trap -p EXIT) ]] && die 'Error! Attempting to overwrite existing EXIT trap'
-    trap "$1" EXIT
-}
-
-chroot_mount() {
-    info "mount: [%s]" "$2"
-    mount "$@" && CHROOT_ACTIVE_MOUNTS=("$2" "${CHROOT_ACTIVE_MOUNTS[@]}")
-}
-
-chroot_add_resolv_conf() {
-    local chrootdir=$1 resolv_conf=$1/etc/resolv.conf
-
-    [[ -e /etc/resolv.conf ]] || return 0
-
-    # Handle resolv.conf as a symlink to somewhere else.
-    if [[ -L $chrootdir/etc/resolv.conf ]]; then
-        # readlink(1) should always give us *something* since we know at this point
-        # it's a symlink. For simplicity, ignore the case of nested symlinks.
-        resolv_conf=$(readlink "$chrootdir/etc/resolv.conf")
-        if [[ $resolv_conf = /* ]]; then
-            resolv_conf=$chrootdir$resolv_conf
-        else
-            resolv_conf=$chrootdir/etc/$resolv_conf
-        fi
-
-        # ensure file exists to bind mount over
-        if [[ ! -f $resolv_conf ]]; then
-            install -Dm644 /dev/null "$resolv_conf" || return 1
-        fi
-    elif [[ ! -e $chrootdir/etc/resolv.conf ]]; then
-        # The chroot might not have a resolv.conf.
-        return 0
-    fi
-
-    chroot_mount /etc/resolv.conf "$resolv_conf" --bind
-}
-
-chroot_mount_conditional() {
-    local cond=$1; shift
-    if eval "$cond"; then
-        chroot_mount "$@"
-    fi
-}
-
-chroot_setup(){
-    chroot_mount_conditional "! mountpoint -q '$1'" "$1" "$1" --bind &&
-    chroot_mount proc "$1/proc" -t proc -o nosuid,noexec,nodev &&
-    chroot_mount sys "$1/sys" -t sysfs -o nosuid,noexec,nodev,ro &&
-    ignore_error chroot_mount_conditional "[[ -d '$1/sys/firmware/efi/efivars' ]]" \
-        efivarfs "$1/sys/firmware/efi/efivars" -t efivarfs -o nosuid,noexec,nodev &&
-    chroot_mount udev "$1/dev" -t devtmpfs -o mode=0755,nosuid &&
-    chroot_mount devpts "$1/dev/pts" -t devpts -o mode=0620,gid=5,nosuid,noexec &&
-    chroot_mount shm "$1/dev/shm" -t tmpfs -o mode=1777,nosuid,nodev &&
-    chroot_mount run "$1/run" -t tmpfs -o nosuid,nodev,mode=0755 &&
-    chroot_mount tmp "$1/tmp" -t tmpfs -o mode=1777,strictatime,nodev,nosuid
-}
-
-mount_os(){
-    CHROOT_ACTIVE_PART_MOUNTS=()
-    CHROOT_ACTIVE_MOUNTS=()
-
-    trap_setup chroot_part_umount
-
-    chroot_part_mount "$2" "$1"
-
-    local mounts=$(parse_fstab "$1")
-
-    for entry in ${mounts[@]}; do
-        entry=${entry//UUID=}
-        local dev=${entry%:*} mp=${entry#*:}
-        case "${entry#*:}" in
-            '/'|'swap'|'none') continue ;;
-            *) chroot_part_mount "/dev/disk/by-uuid/${dev}" "$1${mp}" ;;
-        esac
-    done
-
-    chroot_setup "$1"
-    chroot_add_resolv_conf "$1"
-}
-
-chroot_api_mount() {
-    CHROOT_ACTIVE_MOUNTS=()
-    trap_setup chroot_api_umount
-    chroot_setup "$1"
-}
-
-chroot_api_umount() {
-    if (( ${#CHROOT_ACTIVE_MOUNTS[@]} )); then
-        info "umount: [%s]" "${CHROOT_ACTIVE_MOUNTS[@]}"
-        umount "${CHROOT_ACTIVE_MOUNTS[@]}"
-    fi
-    unset CHROOT_ACTIVE_MOUNTS
-}
-
-chroot_part_umount() {
-    chroot_api_umount
-    info "umount: [%s]" "${CHROOT_ACTIVE_PART_MOUNTS[@]}"
-    umount "${CHROOT_ACTIVE_PART_MOUNTS[@]}"
-    unset CHROOT_ACTIVE_PART_MOUNTS
-}
-

lib/util-msg.sh

@@ -1,110 +0,0 @@
-#!/bin/bash
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# export LC_MESSAGES=C
-export LANG=C
-
-source /usr/share/makepkg/util.sh
-
-if [[ -t 2 ]]; then
-    colorize
-else
-    declare -gr ALL_OFF='' BOLD='' BLUE='' GREEN='' RED='' YELLOW=''
-fi
-
-info() {
-    local mesg=$1; shift
-    printf "${YELLOW} -->${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
-}
-
-stat_busy() {
-    local mesg=$1; shift
-    printf "${GREEN}==>${ALL_OFF}${BOLD} ${mesg}...${ALL_OFF}" "$@" >&2
-}
-
-stat_done() {
-    printf "${BOLD}done${ALL_OFF}\n" >&2
-}
-
-lock_close() {
-	local fd=$1
-	exec {fd}>&-
-}
-
-lock() {
-    if ! [[ "/dev/fd/$1" -ef "$2" ]]; then
-        mkdir -p -- "$(dirname -- "$2")"
-        eval "exec $1>"'"$2"'
-    fi
-    if ! flock -n $1; then
-        stat_busy "$3"
-        flock $1
-        stat_done
-    fi
-}
-
-slock() {
-    if ! [[ "/dev/fd/$1" -ef "$2" ]]; then
-        mkdir -p -- "$(dirname -- "$2")"
-        eval "exec $1>"'"$2"'
-    fi
-    if ! flock -sn $1; then
-        stat_busy "$3"
-        flock -s $1
-        stat_done
-    fi
-}
-
-cleanup() {
-    exit ${1:-0}
-}
-
-abort() {
-    error 'Aborting...'
-    cleanup 255
-}
-
-die() {
-    (( $# )) && error "$@"
-    cleanup 255
-}
-
-msg_table_header(){
-    local mesg=$1; shift
-    printf "${BLUE} ${mesg} ${ALL_OFF}\n" "$@" >&2
-}
-
-msg_row_downgrade(){
-    local mesg=$1; shift
-    printf "${YELLOW} ${mesg}${ALL_OFF}\n" "$@" >&2
-}
-
-msg_row_notify(){
-    local mesg=$1; shift
-    printf "${GREEN} ${mesg}${ALL_OFF}\n" "$@" >&2
-}
-
-msg_row(){
-    local mesg=$1; shift
-    printf "${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
-}
-
-msg_row_upgrade(){
-    local mesg=$1; shift
-    printf "${RED}${RED} ${mesg} ${ALL_OFF}\n" "$@" >&2
-}
-
-import(){
-    if [[ -r "$1" ]];then
-        source "$1"
-    else
-        die 'Could not import %s' "$1"
-    fi
-}

lib/util-pkg-gitea.sh

@@ -1,234 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-create_repo(){
-    local pkg="$1" org="$2"
-    local gitname=$(get_compliant_name "$pkg")
-    local json="{ \"auto_init\": true, \"name\":\"$gitname\", \"gitignores\":\"ArchLinuxPackages\", \"readme\": \"Default\" }"
-
-    msg2 "Create package repo [%s] in org (%s)" "${pkg}" "${org}"
-
-    curl -X POST "${GIT_URL}/api/v1/org/$org/repos?access_token=${GIT_TOKEN}" \
-        -H "accept: application/json" \
-        -H "content-type: application/json" \
-        -d "$json"
-
-    echo
-}
-
-delete_repo(){
-    local pkg="$1" org="$2"
-    local gitname=$(get_compliant_name "$pkg")
-
-    msg2 "Delete package repo [%s] in org (%s)" "${pkg}" "${org}"
-
-    curl -X DELETE "${GIT_URL}/api/v1/repos/$org/$gitname?access_token=${GIT_TOKEN}" \
-        -H  "accept: application/json"
-}
-
-get_pkg_org(){
-    local pkg="$1" org= sub=
-    case ${pkg} in
-#         ruby-*) org=${pkg:0:6}; sub="${org:5}"; echo "packagesRuby" ;;
-        perl-*) org=${pkg:0:6}; sub="${org:5}"; echo "packagesPerl" ;;
-        python-*) org=${pkg:0:8}; sub="${org:7}"; echo "packagesPython" ;;
-        python2-*) org=${pkg:0:9}; sub="${org:8}"; echo "packagesPython" ;;
-        lib32*) org=${pkg:0:7}; sub="${org:6}"; echo "packagesL" ;; #"packages${sub^^}" ;;
-#         lib*) org=${pkg:0:4}; sub="${org:3}"; echo "packagesLib${sub^^}" ;;
-        *) org=${pkg:0:1}; echo "packages${org^^}" ;;
-    esac
-}
-
-load_team_id(){
-    local org="$1" tree="$2" id=0
-
-    case $org in
-        packagesA)
-            case $tree in
-                packages) id=70 ;;
-                community) id=71 ;;
-            esac
-        ;;
-        packagesB)
-            case $tree in
-                packages) id=72 ;;
-                community) id=73 ;;
-            esac
-        ;;
-        packagesC)
-            case $tree in
-                packages) id=74 ;;
-                community) id=75 ;;
-            esac
-        ;;
-        packagesD)
-            case $tree in
-                packages) id=76 ;;
-                community) id=77 ;;
-            esac
-        ;;
-        packagesE)
-            case $tree in
-                packages) id=78 ;;
-                community) id=79 ;;
-            esac
-        ;;
-        packagesF)
-            case $tree in
-                packages) id=80 ;;
-                community) id=81 ;;
-            esac
-        ;;
-        packagesG)
-            case $tree in
-                packages) id=82 ;;
-                community) id=83 ;;
-            esac
-        ;;
-        packagesH)
-            case $tree in
-                packages) id=84 ;;
-                community) id=85 ;;
-            esac
-        ;;
-        packagesI)
-            case $tree in
-                packages) id=86 ;;
-                community) id=87 ;;
-            esac
-        ;;
-        packagesJ)
-            case $tree in
-                packages) id=88 ;;
-                community) id=89 ;;
-            esac
-        ;;
-        packagesK)
-            case $tree in
-                packages) id=90 ;;
-                community) id=91 ;;
-            esac
-        ;;
-        packagesL)
-            case $tree in
-                packages) id=92 ;;
-                community) id=93 ;;
-            esac
-        ;;
-        packagesM)
-            case $tree in
-                packages) id=94 ;;
-                community) id=95 ;;
-            esac
-        ;;
-        packagesN)
-            case $tree in
-                packages) id=96 ;;
-                community) id=97 ;;
-            esac
-        ;;
-        packagesO)
-            case $tree in
-                packages) id=98 ;;
-                community) id=99 ;;
-            esac
-        ;;
-        packagesP)
-            case $tree in
-                packages) id=100 ;;
-                community) id=101 ;;
-            esac
-        ;;
-        packagesQ)
-            case $tree in
-                packages) id=105 ;;
-                community) id=106 ;;
-            esac
-        ;;
-        packagesR)
-            case $tree in
-                packages) id=107 ;;
-                community) id=108 ;;
-            esac
-        ;;
-        packagesS)
-            case $tree in
-                packages) id=109 ;;
-                community) id=110 ;;
-            esac
-        ;;
-        packagesT)
-            case $tree in
-                packages) id=111 ;;
-                community) id=112 ;;
-            esac
-        ;;
-        packagesU)
-            case $tree in
-                packages) id=113 ;;
-                community) id=114 ;;
-            esac
-        ;;
-        packagesV)
-            case $tree in
-                packages) id=115 ;;
-                community) id=116 ;;
-            esac
-        ;;
-        packagesW)
-            case $tree in
-                packages) id=117 ;;
-                community) id=118 ;;
-            esac
-        ;;
-        packagesX)
-            case $tree in
-                packages) id=119 ;;
-                community) id=120 ;;
-            esac
-        ;;
-        packagesY)
-            case $tree in
-                packages) id=121 ;;
-                community) id=122 ;;
-            esac
-        ;;
-        packagesZ)
-            case $tree in
-                packages) id=123 ;;
-                community) id=124 ;;
-            esac
-        ;;
-        packagesPython)
-            case $tree in
-                packages) id=103 ;;
-                community) id=104 ;;
-            esac
-        ;;
-        packagesPerl)
-            case $tree in
-                packages) id=102 ;;
-                community) id=125 ;;
-            esac
-        ;;
-    esac
-    echo $id
-}
-
-add_repo_to_team(){
-    local pkg="$1" org="$2" tree="$3"
-    local id=$(load_team_id "$org" "$tree")
-
-    msg2 "Adding package repo [%s] to team (%s)" "$pkg" "$tree"
-
-    curl -X PUT "${GIT_URL}/api/v1/teams/$id/repos/$org/$pkg?access_token=${GIT_TOKEN}" \
-        -H  "accept: application/json"
-}

lib/util-pkg-subrepo.sh

@@ -1,90 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-subrepo_push(){
-    local pkg="$1"
-    msg2 "Update (%s)" "$pkg"
-    git subrepo push "$pkg"
-}
-
-subrepo_config(){
-    local pkg="$1" org="$2"
-    local gitname=$(get_compliant_name "$pkg")
-    local url=gitea@"${GIT_DOMAIN}":"$org"/"$gitname".git
-    msg2 "Update .gitrepo (%s) [%s]" "$pkg" "$url"
-    git subrepo config "$pkg" remote "$url"
-}
-
-subrepo_clean(){
-    local pkg="$1"
-    msg2 "Clean (%s)" "$pkg"
-    git subrepo clean "$pkg"
-}
-
-subrepo_pull(){
-    local pkg="$1"
-    git subrepo pull "$pkg"
-}
-
-subrepo_clone(){
-    local pkg="$1" org="$2"
-    local gitname=$(get_compliant_name "$pkg")
-    msg2 "Getting package repo [%s] from org (%s)" "$pkg" "$org/$gitname"
-    git subrepo clone gitea@"${GIT_DOMAIN}":"$org"/"$gitname".git "$pkg"
-}
-
-mainrepo_pull(){
-    local tree="$1"
-    msg2 "Check (%s)" "${tree}"
-    git push origin master
-}
-
-
-mainrepo_push(){
-    local tree="$1"
-    msg2 "Update (%s)" "${tree}"
-    git push origin master
-}
-
-write_jenkinsfile(){
-    local pkg="$1"
-    local jenkins=$pkg/Jenkinsfile
-
-    echo "@Library('artix-ci') import org.artixlinux.RepoPackage" > $jenkins
-    echo '' >> $jenkins
-    echo 'PackagePipeline(new RepoPackage(this))' >> $jenkins
-    echo '' >> $jenkins
-
-    git add $jenkins
-}
-
-write_agentyaml(){
-    local pkg="$1"
-    local agent=$pkg/.artixlinux/agent.yaml label='master'
-    [[ -d $pkg/.artixlinux ]] || mkdir $pkg/.artixlinux
-
-    echo '%YAML 1.2' > $agent
-    echo '---' >> $agent
-    echo '' >> $agent
-    echo "label: $label" >> $agent
-    echo '' >> $agent
-
-    git add $agent
-}
-
-commit_jenkins_files(){
-    local pkg="$1"
-
-    write_jenkinsfile "$pkg"
-    write_agentyaml "$pkg"
-
-    git commit -m "add jenkinsfile & .artixlinux/agent.yaml"
-}

lib/util-pkg.sh

@@ -1,184 +0,0 @@
-#!/bin/bash
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-get_local_head(){
-    echo $(git log --pretty=%H ...refs/heads/$1^ | head -n 1)
-}
-
-get_remote_head(){
-    echo $(git ls-remote origin -h refs/heads/$1 | cut -f1)
-}
-
-patch_pkg(){
-    local pkg="$1"
-    case $pkg in
-        'glibc')
-            sed -e 's|{locale,systemd/system,tmpfiles.d}|{locale,tmpfiles.d}|' \
-                -e '/nscd.service/d' \
-                -i $pkg/trunk/PKGBUILD
-        ;;
-        'tp_smapi'|'acpi_call'|'r8168'|'bbswitch'|'broadcom-wl')
-            sed -e 's|-ARCH|-ARTIX|g' -i $pkg/trunk/PKGBUILD
-        ;;
-        'nvidia')
-            sed -e 's|-ARCH|-ARTIX|g'  -e 's|for Arch kernel|for Artix kernel|g' \
-                -e 's|for LTS Arch kernel|for LTS Artix kernel|g' \
-                -i $pkg/trunk/PKGBUILD
-        ;;
-        'linux')
-            sed -e 's|-ARCH|-ARTIX|g' -i $pkg/trunk/PKGBUILD
-            sed -e 's|CONFIG_DEFAULT_HOSTNAME=.*|CONFIG_DEFAULT_HOSTNAME="artixlinux"|' \
-                -e 's|CONFIG_CRYPTO_SPECK=.*|CONFIG_CRYPTO_SPECK=n|' \
-                -i $pkg/trunk/config
-            cd $pkg/trunk
-                updpkgsums
-            cd ../..
-
-        ;;
-        'licenses')
-            sed -e 's|https://www.archlinux.org/|https://www.artixlinux.org/|' -i $pkg/trunk/PKGBUILD
-        ;;
-        'bash')
-            sed -e 's|system.bash_logout)|system.bash_logout artix.bashrc)|' \
-            -e "s|etc/bash.|etc/bash/|g" \
-            -e 's|"$pkgdir/etc/skel/.bash_logout"|"$pkgdir/etc/skel/.bash_logout"\n  install -Dm644 artix.bashrc $pkgdir/etc/bash/bashrc.d/artix.bashrc|' \
-            -i $pkg/trunk/PKGBUILD
-
-
-            cd $pkg/trunk
-                patch -Np 1 -i ${DATADIR}/patches/artix-bash.patch
-                updpkgsums
-            cd ../..
-        ;;
-        gstreamer|gst-plugins-*)
-            sed -e 's|https://www.archlinux.org/|https://www.artixlinux.org/|' \
-                -e 's|(Arch Linux)|(Artix Linux)|' \
-                -i $pkg/trunk/PKGBUILD
-        ;;
-    esac
-}
-
-get_compliant_name(){
-    local gitname="$1"
-    case $gitname in
-        *+) gitname=${gitname//+/plus}
-    esac
-    echo $gitname
-}
-
-find_tree(){
-    local tree="$1" pkg="$2"
-    local result=$(find $tree -mindepth 2 -maxdepth 2 -type d -name "$pkg")
-    result=${result%/*}
-    echo ${result##*/}
-}
-
-find_repo(){
-    local pkg="$1" stag="$2" unst="$3" repo=
-    local repos=(core extra testing community community-testing multilib multilib-testing)
-
-    $stag && repos+=(staging community-staging multilib-staging)
-    $unst && repos+=(gnome-unstable kde-unstable)
-
-    for r in ${repos[@]};do
-        [[ -f $pkg/repos/$r-x86_64/PKGBUILD ]] && repo=$r-x86_64
-        [[ -f $pkg/repos/$r-any/PKGBUILD ]] && repo=$r-any
-    done
-    echo $repo
-}
-
-get_import_path(){
-    local pkg="$1" import_path=
-    for tree in ${tree_names[@]};do
-        [[ -d ${TREE_DIR_ARCH}/$tree/$pkg ]] && import_path=${TREE_DIR_ARCH}/$tree/$pkg
-    done
-    echo $import_path
-}
-
-clone_tree(){
-    local timer=$(get_timer) host_tree="$1"
-    git clone $host_tree.git
-    show_elapsed_time "${FUNCNAME}" "${timer}"
-}
-
-pull_tree(){
-    local branch="master"
-    local local_head=$(get_local_head "$branch")
-    local remote_head=$(get_remote_head "$branch")
-    if [[ "${local_head}" == "${remote_head}" ]]; then
-        msg2 "remote changes: no"
-    else
-        msg2 "remote changes: yes"
-        git pull origin "$branch"
-    fi
-}
-
-pkgver_equal() {
-    if [[ $1 = *-* && $2 = *-* ]]; then
-        # if both versions have a pkgrel, then they must be an exact match
-        [[ $1 = "$2" ]]
-    else
-        # otherwise, trim any pkgrel and compare the bare version.
-        [[ ${1%%-*} = "${2%%-*}" ]]
-    fi
-}
-
-find_cached_package() {
-    local searchdirs=("$PKGDEST" "$PWD") results=()
-    local targetname=$1 targetver=$2 targetarch=$3
-    local dir pkg pkgbasename name ver rel arch r results
-
-    for dir in "${searchdirs[@]}"; do
-        [[ -d $dir ]] || continue
-
-        for pkg in "$dir"/*.pkg.tar.?z; do
-            [[ -f $pkg ]] || continue
-
-            # avoid adding duplicates of the same inode
-            for r in "${results[@]}"; do
-                [[ $r -ef $pkg ]] && continue 2
-            done
-
-            # split apart package filename into parts
-            pkgbasename=${pkg##*/}
-            pkgbasename=${pkgbasename%.pkg.tar.?z}
-
-            arch=${pkgbasename##*-}
-            pkgbasename=${pkgbasename%-"$arch"}
-
-            rel=${pkgbasename##*-}
-            pkgbasename=${pkgbasename%-"$rel"}
-
-            ver=${pkgbasename##*-}
-            name=${pkgbasename%-"$ver"}
-
-            if [[ $targetname = "$name" && $targetarch = "$arch" ]] &&
-                pkgver_equal "$targetver" "$ver-$rel"; then
-                results+=("$pkg")
-            fi
-        done
-    done
-
-    case ${#results[*]} in
-        0)
-            return 1
-        ;;
-        1)
-            printf '%s\n' "${results[0]}"
-            return 0
-        ;;
-        *)
-            error 'Multiple packages found:'
-            printf '\t%s\n' "${results[@]}" >&2
-            return 1
-        ;;
-    esac
-}

lib/util.sh

@@ -1,168 +0,0 @@
-#!/bin/bash
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-get_timer(){
-    echo $(date +%s)
-}
-
-# $1: start timer
-elapsed_time(){
-    echo $(echo $1 $(get_timer) | awk '{ printf "%0.2f",($2-$1)/60 }')
-}
-
-show_elapsed_time(){
-    info "Time %s: %s minutes" "$1" "$(elapsed_time $2)"
-}
-
-load_vars() {
-    local var
-
-    [[ -f $1 ]] || return 1
-
-    for var in {SRC,SRCPKG,PKG,LOG}DEST MAKEFLAGS PACKAGER CARCH GPGKEY; do
-        [[ -z ${!var:-} ]] && eval "$(grep -a "^${var}=" "$1")"
-    done
-
-    return 0
-}
-
-prepare_dir(){
-    [[ ! -d $1 ]] && mkdir -p $1
-}
-
-get_disturl(){
-    source /usr/lib/os-release
-    echo "${HOME_URL}"
-}
-
-get_osname(){
-    source /usr/lib/os-release
-    echo "${NAME}"
-}
-
-init_artools_base(){
-
-    ARCH=$(uname -m)
-
-    [[ -z ${CHROOTS_DIR} ]] && CHROOTS_DIR='/var/lib/artools'
-
-    [[ -z ${WORKSPACE_DIR} ]] && WORKSPACE_DIR=/home/${OWNER}/artools-workspace
-
-    prepare_dir "${WORKSPACE_DIR}"
-}
-
-init_artools_pkg(){
-
-    DOMAIN='artixlinux.org'
-
-    GIT_DOMAIN="gitea.${DOMAIN}"
-
-    GIT_URL="https://${GIT_DOMAIN}"
-
-    [[ -z ${GIT_TOKEN} ]] && GIT_TOKEN=''
-
-    [[ -z ${TREE_DIR_ARTIX} ]] && TREE_DIR_ARTIX="${WORKSPACE_DIR}/artixlinux"
-
-    [[ -z ${HOST_TREE_ARTIX} ]] && HOST_TREE_ARTIX="gitea@${GIT_DOMAIN}:artixlinux"
-
-    [[ -z ${TREE_DIR_ARCH} ]] && TREE_DIR_ARCH="${WORKSPACE_DIR}/archlinux"
-
-    [[ -z ${HOST_TREE_ARCH} ]] && HOST_TREE_ARCH='git://projects.archlinux.org/svntogit'
-
-    CHROOTS_PKG="${CHROOTS_DIR}/buildpkg"
-
-    [[ -z ${REPOS_ROOT} ]] && REPOS_ROOT="${WORKSPACE_DIR}/repos"
-}
-
-init_artools_iso(){
-    CHROOTS_ISO="${CHROOTS_DIR}/buildiso"
-
-    [[ -z ${ISO_POOL} ]] && ISO_POOL="${WORKSPACE_DIR}/iso"
-
-    prepare_dir "${ISO_POOL}"
-
-    PROFILE='base'
-
-    [[ -z ${ISO_VERSION} ]] && ISO_VERSION=$(date +%Y%m%d)
-
-    [[ -z ${INITSYS} ]] && INITSYS="openrc"
-
-    [[ -z ${GPG_KEY} ]] && GPG_KEY=''
-
-    [[ -z ${UPLIMIT} ]] && UPLIMIT=1000
-
-    FILE_HOST="download.${DOMAIN}"
-
-    [[ -z ${FILE_HOME} ]] && FILE_HOME="/srv/iso"
-
-    [[ -z ${FILE_PORT} ]] && FILE_PORT=65432
-
-    [[ -z ${ACCOUNT} ]] && ACCOUNT="naughtyISOuploader"
-}
-
-
-load_config(){
-
-    [[ -f $1 ]] || return 1
-
-    ARTOOLS_CONF="$1"
-
-    [[ -r ${ARTOOLS_CONF} ]] && source ${ARTOOLS_CONF}
-
-    init_artools_base
-
-    init_artools_pkg
-
-    init_artools_iso
-
-    return 0
-}
-
-user_own(){
-    local flag=$2
-    chown ${flag} "${OWNER}:$(id --group ${OWNER})" "$1"
-}
-
-user_run(){
-    su ${OWNER} -c "$@"
-}
-
-clean_dir(){
-    if [[ -d $1 ]]; then
-        msg "Cleaning [%s] ..." "$1"
-        rm -r $1/*
-    fi
-}
-
-load_user_info(){
-    OWNER=${SUDO_USER:-$USER}
-
-    if [[ -n $SUDO_USER ]]; then
-        eval "USER_HOME=~$SUDO_USER"
-    else
-        USER_HOME=$HOME
-    fi
-
-    AT_USERCONFDIR="${XDG_CONFIG_HOME:-$USER_HOME/.config}/artools"
-    PAC_USERCONFDIR="${XDG_CONFIG_HOME:-$USER_HOME/.config}/pacman"
-    prepare_dir "${AT_USERCONFDIR}"
-}
-
-# orig_argv=("$0" "$@")
-check_root() {
-    local keepenv=$1
-
-    (( EUID == 0 )) && return
-    if type -P sudo >/dev/null; then
-        exec sudo --preserve-env=$keepenv -- "${orig_argv[@]}"
-    else
-        exec su root -c "$(printf ' %q' "${orig_argv[@]}")"
-    fi
-}

src/base/artix-chroot.in

@@ -0,0 +1,47 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+shopt -s extglob
+
+LIBDIR=${LIBDIR:-'@libdir@'}
+
+# shellcheck source=src/lib/base/message.sh
+source "${LIBDIR}"/base/message.sh
+# shellcheck source=src/lib/base/chroot.sh
+source "${LIBDIR}"/base/chroot.sh
+# shellcheck source=src/lib/base/mount.sh
+source "${LIBDIR}"/base/mount.sh
+
+usage() {
+    printf 'usage: %s chroot-dir [command]\n' "${0##*/}"
+    printf '    -h             Print this help message\n'
+    printf '\n'
+    printf "    If 'command' is unspecified, %s will launch /bin/sh.\n" "${0##*/}"
+    printf '\n'
+    printf '\n'
+    exit "$1"
+}
+
+orig_args=("$@")
+
+opts=':h'
+
+while getopts ${opts} arg; do
+    case "${arg}" in
+        h|?) usage 0 ;;
+    esac
+done
+shift $(( OPTIND - 1 ))
+
+check_root "" "${BASH_SOURCE[0]}" "${orig_args[@]}"
+
+chrootdir=$1
+shift
+
+[[ -d ${chrootdir} ]] || die "Can't create chroot on non-directory %s" "${chrootdir}"
+
+chroot_api_mount "${chrootdir}" || die "failed to setup API filesystems in chroot %s" "${chrootdir}"
+chroot_add_resolv_conf "${chrootdir}"
+
+SHELL=/bin/sh unshare --fork --pid chroot "${chrootdir}" "$@"

src/base/basestrap.in

@@ -0,0 +1,122 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#
+# Assumptions:
+#  1) User has partitioned, formatted, and mounted partitions on /mnt
+#  2) Network is functional
+#  3) Arguments passed to the script are valid pacman targets
+#  4) A valid mirror appears in /etc/pacman.d/mirrorlist
+#
+
+shopt -s extglob
+
+LIBDIR=${LIBDIR:-'@libdir@'}
+
+# shellcheck source=src/lib/base/message.sh
+source "${LIBDIR}"/base/message.sh
+# shellcheck source=src/lib/base/mount.sh
+source "${LIBDIR}"/base/mount.sh
+# shellcheck source=src/lib/base/chroot.sh
+source "${LIBDIR}"/base/chroot.sh
+
+#{{{ functions
+
+copy_mirrorlist(){
+    cp -a /etc/pacman.d/mirrorlist "$1/etc/pacman.d/"
+}
+
+copy_keyring(){
+    if [[ -d /etc/pacman.d/gnupg ]] && [[ ! -d $1/etc/pacman.d/gnupg ]]; then
+        cp -a /etc/pacman.d/gnupg "$1/etc/pacman.d/"
+    fi
+}
+
+create_min_fs(){
+    msg "Creating install root at %s" "$1"
+    mkdir -m 0755 -p "$1"/var/{cache/pacman/pkg,lib/pacman,log} "$1"/{dev,run,etc/pacman.d}
+    mkdir -m 1777 -p "$1"/tmp
+    mkdir -m 0555 -p "$1"/{sys,proc}
+}
+
+#}}}
+
+newroot=/mnt
+
+hostcache=0
+copykeyring=1
+copymirrorlist=1
+pacmode=-Sy
+
+usage() {
+    printf "usage: %s [options] root [packages...]\n" "${0##*/}"
+    printf " -C <config>      Use an alternate config file for pacman\n"
+    printf " -c               Use the package cache on the host, rather than the target\n"
+    printf " -G               Avoid copying the host's pacman keyring to the target\n"
+    printf " -i               Avoid auto-confirmation of package selections\n"
+    printf " -M               Avoid copying the host's mirrorlist to the target\n"
+    printf ' -U               Use pacman -U to install packages\n'
+    printf " -h               Print this help message\n"
+    printf '\n'
+    printf ' basestrap installs packages to the specified new root directory.\n'
+    printf ' If no packages are given, basestrap defaults to the "base" group.\n'
+    printf '\n'
+    printf '\n'
+    exit "$1"
+}
+
+orig_args=("$@")
+
+opts=':C:cGiMU'
+
+while getopts ${opts} arg; do
+    case "${arg}" in
+        C) pacman_conf=$OPTARG ;;
+        c) hostcache=1 ;;
+        i) interactive=1 ;;
+        G) copykeyring=0 ;;
+        M) copymirrorlist=0 ;;
+        U) pacmode=-U ;;
+        h|?) usage 0 ;;
+    esac
+done
+shift $(( OPTIND - 1 ))
+
+check_root "" "${BASH_SOURCE[0]}" "${orig_args[@]}"
+
+(( $# )) || die "No root directory specified"
+newroot=$1; shift
+pacman_args=("${@:-base}")
+
+if (( ! hostcache ));then
+    pacman_args+=(--cachedir="$newroot/var/cache/pacman/pkg")
+fi
+
+if (( ! interactive )); then
+    pacman_args+=(--noconfirm)
+fi
+
+[[ -n $pacman_conf ]] && pacman_args+=(--config="$pacman_conf")
+
+[[ -d $newroot ]] || die "%s is not a directory" "$newroot"
+
+# create obligatory directories
+create_min_fs "$newroot"
+
+# mount API filesystems
+chroot_api_mount "$newroot" || die "failed to setup API filesystems in new root"
+
+if (( copykeyring ));then
+    copy_keyring "$newroot"
+fi
+
+msg2 'Installing packages to %s' "$newroot"
+if ! unshare --fork --pid pacman -r "$newroot" $pacmode "${pacman_args[@]}"; then
+    die 'Failed to install packages to new root'
+fi
+
+
+if (( copymirrorlist ));then
+    copy_mirrorlist "$newroot"
+fi

src/base/chroot-run.in

@@ -0,0 +1,181 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+LIBDIR=${LIBDIR:-'@libdir@'}
+
+# shellcheck source=src/lib/base/message.sh
+source "${LIBDIR}"/base/message.sh
+# shellcheck source=src/lib/base/mount.sh
+source "${LIBDIR}"/base/mount.sh
+# shellcheck source=src/lib/base/chroot.sh
+source "${LIBDIR}"/base/chroot.sh
+
+CHROOTVERSION=@chrootver@
+
+# $1: chroot
+kill_chroot_process(){
+    local prefix="$1" flink pid name
+    for root_dir in /proc/*/root; do
+        flink=$(readlink "$root_dir")
+        if [[ -n "$flink" ]]; then
+            if [[ "${flink:0:${#prefix}}" == "$prefix" ]]; then
+                # this process is in the chroot...
+                pid=$(basename "$(dirname "$root_dir")")
+                name=$(ps -p "$pid" -o comm=)
+                msg2 "Killing chroot process: %s (%s)" "$name" "$pid"
+                kill -9 "$pid"
+            fi
+        fi
+    done
+    sleep 1
+}
+
+# umask might have been changed in /etc/profile
+# ensure that sane default is set again
+umask 0022
+
+working_dir=''
+files=()
+
+mount_args=("-B:/etc/hosts:/etc/hosts")
+
+usage() {
+    printf "Usage: %s [options] working-dir [run arguments]\n" "${0##*/}"
+    printf "A wrapper around chroot. Provides support for pacman.\n"
+    printf '\n'
+    printf ' options:\n'
+    printf '    -C <file>     Location of a pacman config file\n'
+    printf '    -M <file>     Location of a makepkg config file\n'
+    printf '    -c <dir>      Set pacman cache\n'
+    printf '    -f <file>     Copy file from the host to the chroot\n'
+    printf '    -s            Do not run setarch\n'
+    printf '    -b <list>     Bind mountargs\n'
+    printf '                  List format [mntarg1:src1:dest1 ... mntargN:srcN:destN]\n'
+    printf '    -h            This message\n'
+    exit 1
+}
+
+orig_args=("$@")
+
+opts='hC:M:c:b:f:s'
+
+while getopts ${opts} arg; do
+    case "${arg}" in
+        C) pacman_conf="$OPTARG" ;;
+        M) makepkg_conf="$OPTARG" ;;
+        c) cache_dirs+=("$OPTARG") ;;
+        f) files+=("$OPTARG") ;;
+        s) nosetarch=1 ;;
+        b) bindmounts="$OPTARG"; mount_args+=(${bindmounts}) ;;
+        h|?) usage ;;
+    esac
+done
+shift $(( OPTIND - 1 ))
+
+(( $# < 1 )) && die 'You must specify a directory.'
+
+check_root "" "${BASH_SOURCE[0]}" "${orig_args[@]}"
+
+working_dir=$(readlink -f "$1")
+shift 1
+
+[[ -z $working_dir ]] && die 'Please specify a working directory.'
+
+if (( ${#cache_dirs[@]} == 0 )); then
+    mapfile -t cache_dirs < <(pacman-conf --config "${pac_conf:-$working_dir/etc/pacman.conf}" CacheDir)
+fi
+
+# shellcheck disable=2016
+mapfile -t host_mirrors < <(pacman-conf --repo world Server 2> /dev/null | sed -r 's#(.*/)world/os/.*#\1$repo/os/$arch#')
+
+for host_mirror in "${host_mirrors[@]}"; do
+    if [[ $host_mirror == *file://* ]]; then
+        # shellcheck disable=2016
+        host_mirror=$(printf "%s\n" "$host_mirror" | sed -r 's#file://(/.*)/\$repo/os/\$arch#\1#g')
+        in_array "$host_mirror" "${cache_dirs[@]}" || cache_dirs+=("$host_mirror")
+    fi
+done
+
+while read -r line; do
+    # shellcheck disable=2016
+    mapfile -t lines < <(pacman-conf --config "${pac_conf:-$working_dir/etc/pacman.conf}" \
+        --repo "$line" Server | sed -r 's#(.*/)[^/]+/os/.+#\1#')
+    for line in "${lines[@]}"; do
+        if [[ $line = file://* ]]; then
+            line=${line#file://}
+            in_array "$line" "${cache_dirs[@]}" || cache_dirs+=("$line")
+        fi
+    done
+done < <(pacman-conf --config "${pac_conf:-$working_dir/etc/pacman.conf}" --repo-list)
+
+copy_hostconf () {
+    unshare --fork --pid gpg --homedir "$working_dir"/etc/pacman.d/gnupg/ --no-permission-warning --quiet --batch --import --import-options import-local-sigs "$(pacman-conf GpgDir)"/pubring.gpg >/dev/null 2>&1
+    pacman-key --gpgdir "$working_dir"/etc/pacman.d/gnupg/ --import-trustdb "$(pacman-conf GpgDir)" >/dev/null 2>&1
+
+    printf 'Server = %s\n' "${host_mirrors[@]}" >"$working_dir/etc/pacman.d/mirrorlist"
+
+    [[ -n $pacman_conf ]] && cp "$pacman_conf" "${working_dir}/etc/pacman.conf"
+
+    [[ -n $makepkg_conf ]] && cp "$makepkg_conf" "${working_dir}/etc/makepkg.conf"
+
+    local file
+    for file in "${files[@]}"; do
+        mkdir -p "$(dirname "$working_dir$file")"
+        cp -T "$file" "$working_dir$file"
+    done
+
+    sed -r "s|^#?\\s*CacheDir.+|CacheDir = ${cache_dirs[*]}|g" -i "${working_dir}/etc/pacman.conf"
+}
+
+mount_args+=("-B:${cache_dirs[0]//:/\\:}:${cache_dirs[0]//:/\\:}")
+
+for cache_dir in "${cache_dirs[@]:1}"; do
+    mount_args+=("-Br:${cache_dir//:/\\:}:${cache_dir//:/\\:}")
+done
+
+chroot_extra_mount() {
+    chroot_add_resolv_conf "${working_dir}"
+
+    for arg in "${mount_args[@]}"; do
+        local flag dest src
+        flag=${arg%%:*}
+        dest=${arg##*:}
+        src=${arg%:*}
+        src=${src#*:}
+        chroot_mount "${src}" "${working_dir}${dest}" "${flag}"
+    done
+}
+
+umask 0022
+
+# Sanity check
+if [[ ! -f "$working_dir/.artools" ]]; then
+    die "'%s' does not appear to be an artix chroot." "$working_dir"
+elif [[ $(cat "$working_dir/.artools") != "${CHROOTVERSION}" ]]; then
+    die "chroot '%s' is not at version %s. Please rebuild." "$working_dir" "${CHROOTVERSION}"
+fi
+
+chroot_api_mount "${working_dir}" || die "failed to setup API filesystems in chroot %s" "${working_dir}"
+
+chroot_extra_mount
+
+copy_hostconf
+
+eval "$(grep '^CARCH=' "$working_dir/etc/makepkg.conf")"
+
+[[ -z $nosetarch ]] || unset CARCH
+
+if [[ -f "/usr/share/artools/artools/setarch-aliases.d/${CARCH}" ]]; then
+    read -r set_arch < "/usr/share/artools/artools/setarch-aliases.d/${CARCH}"
+else
+    set_arch="${CARCH}"
+fi
+
+${CARCH:+setarch "${set_arch}"} chroot "${working_dir}" "$@"
+
+ret=$?
+
+kill_chroot_process "${working_dir}"
+
+exit $ret

src/base/fstabgen.in

@@ -0,0 +1,425 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+shopt -s extglob
+
+LIBDIR=${LIBDIR:-'@libdir@'}
+
+# shellcheck source=src/lib/base/message.sh
+source "${LIBDIR}"/base/message.sh
+
+#{{{ filesystems
+
+declare -A pseudofs_types=([anon_inodefs]=1
+                        [autofs]=1
+                        [bdev]=1
+                        [bpf]=1
+                        [binfmt_misc]=1
+                        [cgroup]=1
+                        [cgroup2]=1
+                        [configfs]=1
+                        [cpuset]=1
+                        [debugfs]=1
+                        [devfs]=1
+                        [devpts]=1
+                        [devtmpfs]=1
+                        [dlmfs]=1
+                        [efivarfs]=1
+                        [fuse.gvfs-fuse-daemon]=1
+                        [fusectl]=1
+                        [hugetlbfs]=1
+                        [mqueue]=1
+                        [nfsd]=1
+                        [none]=1
+                        [pipefs]=1
+                        [proc]=1
+                        [pstore]=1
+                        [ramfs]=1
+                        [rootfs]=1
+                        [rpc_pipefs]=1
+                        [securityfs]=1
+                        [sockfs]=1
+                        [spufs]=1
+                        [sysfs]=1
+                        [tmpfs]=1)
+
+declare -A fsck_types=([cramfs]=1
+                    [exfat]=1
+                    [ext2]=1
+                    [ext3]=1
+                    [ext4]=1
+                    [ext4dev]=1
+                    [jfs]=1
+                    [minix]=1
+                    [msdos]=1
+                    [reiserfs]=1
+                    [vfat]=1
+                    [xfs]=1)
+
+#}}}
+
+#{{{ functions
+
+fstype_is_pseudofs() {
+    (( pseudofs_types["$1"] ))
+}
+
+fstype_has_fsck() {
+    (( fsck_types["$1"] ))
+}
+
+valid_number_of_base() {
+    local base=$1 len=${#2} i
+
+    for (( i = 0; i < len; i++ )); do
+        { _=$(( $base#${2:i:1} )) || return 1; } 2>/dev/null
+    done
+
+    return 0
+}
+
+mangle() {
+    local i chr out
+
+    local {a..f}= {A..F}=
+
+    for (( i = 0; i < ${#1}; i++ )); do
+        chr=${1:i:1}
+        case $chr in
+            [[:space:]\\])
+                printf -v chr '%03o' "'$chr"
+                out+=\\
+            ;;
+        esac
+        out+=$chr
+    done
+
+    printf '%s' "$out"
+}
+
+unmangle() {
+    local i chr out len=$(( ${#1} - 4 ))
+
+    local {a..f}= {A..F}=
+
+    for (( i = 0; i < len; i++ )); do
+        chr=${1:i:1}
+        case $chr in
+            \\)
+                if valid_number_of_base 8 "${1:i+1:3}" ||
+                    valid_number_of_base 16 "${1:i+1:3}"; then
+                    printf -v chr '%b' "${1:i:4}"
+                    (( i += 3 ))
+                fi
+            ;;
+        esac
+        out+=$chr
+    done
+
+    printf '%s' "$out${1:i}"
+}
+
+dm_name_for_devnode() {
+    read -r dm_name <"/sys/class/block/${1#/dev/}/dm/name"
+    if [[ $dm_name ]]; then
+        printf '/dev/mapper/%s' "$dm_name"
+    else
+        # don't leave the caller hanging, just print the original name
+        # along with the failure.
+        print '%s' "$1"
+        error 'Failed to resolve device mapper name for: %s' "$1"
+    fi
+}
+
+optstring_match_option() {
+    local candidate pat patterns
+
+    IFS=, read -ra patterns <<<"$1"
+    for pat in "${patterns[@]}"; do
+        if [[ $pat = *=* ]]; then
+            # "key=val" will only ever match "key=val"
+            candidate=$2
+        else
+            # "key" will match "key", but also "key=anyval"
+            candidate=${2%%=*}
+        fi
+
+        [[ $pat = "$candidate" ]] && return 0
+    done
+
+    return 1
+}
+
+optstring_remove_option() {
+    local o options_ remove=$2 IFS=,
+
+    read -ra options_ <<<"${!1}"
+
+    for o in "${!options_[@]}"; do
+        optstring_match_option "$remove" "${options_[o]}" && unset 'options_[o]'
+    done
+
+    declare -g "$1=${options_[*]}"
+}
+
+optstring_normalize() {
+    local o options_ norm IFS=,
+
+    read -ra options_ <<<"${!1}"
+
+    # remove empty fields
+    for o in "${options_[@]}"; do
+        [[ $o ]] && norm+=("$o")
+    done
+
+    # avoid empty strings, reset to "defaults"
+    declare -g "$1=${norm[*]:-defaults}"
+}
+
+optstring_append_option() {
+    if ! optstring_has_option "$1" "$2"; then
+        declare -g "$1=${!1},$2"
+    fi
+
+    optstring_normalize "$1"
+}
+
+optstring_prepend_option() {
+    if ! optstring_has_option "$1" "$2"; then
+        declare -g "$1=$2,${!1}"
+    fi
+
+    optstring_normalize "$1"
+}
+
+optstring_get_option() {
+    local opts o
+
+    IFS=, read -ra opts <<<"${!1}"
+    for o in "${opts[@]}"; do
+        if optstring_match_option "$2" "$o"; then
+            declare -g "$o"
+            return 0
+        fi
+    done
+
+    return 1
+}
+
+optstring_has_option() {
+    local "${2%%=*}"
+
+    optstring_get_option "$1" "$2"
+}
+
+write_source() {
+    local src=$1 spec label uuid comment=()
+
+    label=$(lsblk -rno LABEL "$1" 2>/dev/null)
+    uuid=$(lsblk -rno UUID "$1" 2>/dev/null)
+
+    # bind mounts do not have a UUID!
+
+    case $bytag in
+        '')
+            [[ $uuid ]] && comment=("UUID=$uuid")
+            [[ $label ]] && comment+=("LABEL=$(mangle "$label")")
+        ;;
+        LABEL)
+            spec=$label
+            [[ $uuid ]] && comment=("$src" "UUID=$uuid")
+        ;;
+        UUID)
+            spec=$uuid
+            comment=("$src")
+            [[ $label ]] && comment+=("LABEL=$(mangle "$label")")
+        ;;
+        *)
+            [[ $uuid ]] && comment=("$1" "UUID=$uuid")
+            [[ $label ]] && comment+=("LABEL=$(mangle "$label")")
+            [[ $bytag ]] && spec=$(lsblk -rno "$bytag" "$1" 2>/dev/null)
+        ;;
+    esac
+
+    [[ -n "${comment[*]}" ]] && printf '# %s\n' "${comment[*]}"
+
+    if [[ $spec ]]; then
+        printf '%-20s' "$bytag=$(mangle "$spec")"
+    else
+        printf '%-20s' "$(mangle "$src")"
+    fi
+}
+
+optstring_apply_quirks() {
+    local varname="$1" fstype="$2"
+
+    # SELinux displays a 'seclabel' option in /proc/self/mountinfo. We can't know
+    # if the system we're generating the fstab for has any support for SELinux (as
+    # one might install Arch from a Fedora environment), so let's remove it.
+    optstring_remove_option "$varname" seclabel
+
+    # Prune 'relatime' option for any pseudofs. This seems to be a rampant
+    # default which the kernel often exports even if the underlying filesystem
+    # doesn't support it. Example: https://bugs.archlinux.org/task/54554.
+    if awk -v fstype="$fstype" '$1 == fstype { exit 1 }' /proc/filesystems; then
+        optstring_remove_option "$varname" relatime
+    fi
+
+    case $fstype in
+        f2fs)
+            # These are Kconfig options for f2fs. Kernels supporting the options will
+            # only provide the negative versions of these (e.g. noacl), and vice versa
+            # for kernels without support.
+            optstring_remove_option "$varname" noacl,acl,nouser_xattr,user_xattr
+        ;;
+        vfat)
+            # Before Linux v3.8, "cp" is prepended to the value of the codepage.
+            if optstring_get_option "$varname" codepage && [[ "$codepage" = cp* ]]; then
+                optstring_remove_option "$varname" codepage
+                optstring_append_option "$varname" "codepage=${codepage#cp}"
+            fi
+        ;;
+    esac
+}
+
+#}}}
+
+usage() {
+  cat <<EOF
+usage: ${0##*/} [options] root
+
+  Options:
+    -f FILTER      Restrict output to mountpoints matching the prefix FILTER
+    -L             Use labels for source identifiers (shortcut for -t LABEL)
+    -p             Exclude pseudofs mounts (default behavior)
+    -P             Include printing mounts
+    -t TAG         Use TAG for source identifiers
+    -U             Use UUIDs for source identifiers (shortcut for -t UUID)
+
+    -h             Print this help message
+
+fstabgen generates output suitable for addition to an fstab file based on the
+devices mounted under the mountpoint specified by the given root.
+
+EOF
+}
+
+if [[ -z $1 || $1 = @(-h|--help) ]]; then
+    usage
+    exit $(( $# ? 0 : 1 ))
+fi
+
+while getopts ':f:LPpt:U' flag; do
+    case $flag in
+        L) bytag=LABEL ;;
+        U) bytag=UUID ;;
+        f) prefixfilter=$OPTARG ;;
+        P) pseudofs=1 ;;
+        p) pseudofs=0 ;;
+        t) bytag=${OPTARG^^} ;;
+        :) die '%s: option requires an argument -- '\''%s'\' "${0##*/}" "$OPTARG" ;;
+        ?) die '%s: invalid option -- '\''%s'\' "${0##*/}" "$OPTARG" ;;
+    esac
+done
+shift $(( OPTIND - 1 ))
+
+(( $# )) || die "No root directory specified"
+root=$(realpath -mL "$1"); shift
+
+if ! mountpoint -q "$root"; then
+    die "$root is not a mountpoint"
+fi
+
+# handle block devices
+findmnt -Recvruno SOURCE,TARGET,FSTYPE,OPTIONS,FSROOT "$root" |
+while read -r src target fstype opts fsroot; do
+    if (( !pseudofs )) && fstype_is_pseudofs "$fstype"; then
+        continue
+    fi
+
+    [[ $target = "$prefixfilter"* ]] || continue
+
+    # default 5th and 6th columns
+    dump=0 pass=2
+
+    src=$(unmangle "$src")
+    target=$(unmangle "$target")
+    target=${target#"$root"}
+
+    if (( !foundroot )) && findmnt "$src" "$root" >/dev/null; then
+        # this is root. we can't possibly have more than one...
+        pass=1 foundroot=1
+    fi
+
+    # if there's no fsck tool available, then only pass=0 makes sense.
+    if ! fstype_has_fsck "$fstype"; then
+        pass=0
+    fi
+
+    if [[ $fsroot != / && $fstype != btrfs ]]; then
+        # it's a bind mount
+        src=$(findmnt -funcevo TARGET "$src")$fsroot
+        if [[ $src -ef $target ]]; then
+            # hrmm, this is weird. we're probably looking at a file or directory
+            # that was bound into a chroot from the host machine. Ignore it,
+            # because this won't actually be a valid mount. Worst case, the user
+            # just re-adds it.
+            continue
+        fi
+        fstype=none
+        opts+=,bind
+        pass=0
+    fi
+
+    # filesystem quirks
+    case $fstype in
+        fuseblk)
+        # well-behaved FUSE filesystems will report themselves as fuse.$fstype.
+        # this is probably NTFS-3g, but let's just make sure.
+        if ! newtype=$(lsblk -no FSTYPE "$src") || [[ -z $newtype ]]; then
+            # avoid blanking out fstype, leading to an invalid fstab
+            error 'Failed to derive real filesystem type for FUSE device on %s' "$target"
+        else
+            fstype=$newtype
+        fi
+        ;;
+    esac
+
+    optstring_apply_quirks "opts" "$fstype"
+
+    # write one line
+    write_source "$src"
+    printf '\t%-10s' "/$(mangle "${target#/}")" "$fstype" "$opts"
+    printf '\t%s %s' "$dump" "$pass"
+    printf '\n\n'
+done
+
+# handle swaps devices
+{
+    # ignore header
+    read -r
+
+    while read -r device type _ _ prio; do
+        options=defaults
+        if (( prio >= 0 )); then
+            options+=,pri=$prio
+        fi
+
+        # skip files marked deleted by the kernel
+        [[ $device = *'\040(deleted)' ]] && continue
+
+        if [[ $type = file ]]; then
+            printf '%-20s' "${device#"${root%/}"}"
+        elif [[ $device = /dev/dm-+([0-9]) ]]; then
+            # device mapper doesn't allow characters we need to worry
+            # about being mangled, and it does the escaping of dashes
+            # for us in sysfs.
+            write_source "$(dm_name_for_devnode "$device")"
+        else
+            write_source "$(unmangle "$device")"
+        fi
+
+        printf '\t%-10s\t%-10s\t%-10s\t0 0\n\n' 'none' 'swap' "$options"
+    done
+} </proc/swaps

src/base/mkchroot.in

@@ -0,0 +1,106 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+LIBDIR=${LIBDIR:-'@libdir@'}
+
+# shellcheck source=src/lib/base/message.sh
+source "${LIBDIR}"/base/message.sh
+# shellcheck source=src/lib/base/chroot.sh
+source "${LIBDIR}"/base/chroot.sh
+
+CHROOTVERSION=@chrootver@
+
+# umask might have been changed in /etc/profile
+# ensure that sane default is set again
+umask 0022
+
+working_dir=''
+umode=''
+
+files=()
+chroot_args=()
+
+usage() {
+    printf "Usage: %s [options] working-dir package-list...\n" "${0##*/}"
+    printf ' options:\n'
+    printf '    -U            Use pacman -U to install packages\n'
+    printf '    -C <file>     Location of a pacman config file\n'
+    printf '    -M <file>     Location of a makepkg config file\n'
+    printf '    -c <dir>      Set pacman cache\n'
+    printf '    -f <file>     Copy file from the host to the chroot\n'
+    printf '    -s            Do not run setarch\n'
+    printf '    -h            This message\n'
+    exit 1
+}
+
+orig_args=("$@")
+
+opts='hUC:M:c:f:s'
+
+while getopts ${opts} arg; do
+    case "${arg}" in
+        U) umode=U ;;
+        C) pacman_conf="$OPTARG" ;;
+        M) makepkg_conf="$OPTARG" ;;
+        c) cache_dir="$OPTARG" ;;
+        f) files+=("$OPTARG") ;;
+        s) nosetarch=1 ;;
+        h|?) usage ;;
+    esac
+    if [[ $arg != U ]]; then
+        chroot_args+=("-$arg")
+        [[ -v OPTARG ]] && chroot_args+=("$OPTARG")
+    fi
+done
+shift $(( OPTIND - 1 ))
+
+(( $# < 2 )) && die 'You must specify a directory and one or more packages.'
+
+check_root "" "${BASH_SOURCE[0]}" "${orig_args[@]}"
+
+working_dir="$(readlink -f "$1")"
+shift 1
+
+[[ -z $working_dir ]] && die 'Please specify a working directory.'
+
+if (( ${#cache_dirs[@]} == 0 )); then
+    mapfile -t cache_dirs < <(pacman-conf CacheDir)
+fi
+
+umask 0022
+
+[[ -e $working_dir ]] && die "Working directory '%s' already exists" "$working_dir"
+
+mkdir -p "$working_dir"
+
+[[ ! -d $working_dir ]] && mkdir -p "$working_dir"
+
+lock 9 "${working_dir}.lock" "Locking chroot"
+
+if is_btrfs "$working_dir"; then
+    rmdir "$working_dir"
+    if ! btrfs subvolume create "$working_dir"; then
+        die "Couldn't create subvolume for '%s'" "$working_dir"
+    fi
+    chmod 0755 "$working_dir"
+fi
+
+for f in "${files[@]}"; do
+    mkdir -p "$(dirname "$working_dir$f")"
+    cp "$f" "$working_dir$f"
+done
+
+unshare --mount basestrap -${umode}Mc ${pacman_conf:+-C "$pacman_conf"} "$working_dir" \
+    "${cache_dirs[@]/#/--cachedir=}" "$@" || die 'Failed to install all packages'
+
+printf '%s.UTF-8 UTF-8\n' en_US de_DE > "$working_dir/etc/locale.gen"
+printf 'LANG=C.UTF-8\n' > "$working_dir/etc/locale.conf"
+# printf 'KEYMAP=en\n' > "$working_dir/etc/vconsole.conf"
+printf "%s\n" "${CHROOTVERSION}" > "$working_dir/.artools"
+
+dbus-uuidgen --ensure="$working_dir"/etc/machine-id
+
+exec chroot-run \
+    "${chroot_args[@]}" \
+    "$working_dir" locale-gen

src/iso/buildiso.in

@@ -0,0 +1,400 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+LIBDIR=${LIBDIR:-'@libdir@'}
+DATADIR=${DATADIR:-'@datadir@'}
+SYSCONFDIR=${SYSCONFDIR:-'@sysconfdir@/artools'}
+
+# shellcheck source=src/lib/base/util.sh
+source "${LIBDIR}"/base/util.sh
+# shellcheck source=src/lib/iso/util.sh
+source "${LIBDIR}"/iso/util.sh
+# shellcheck source=src/lib/base/message.sh
+source "${LIBDIR}"/base/message.sh
+# shellcheck source=src/lib/base/chroot.sh
+source "${LIBDIR}"/base/chroot.sh
+# shellcheck source=src/lib/base/mount.sh
+source "${LIBDIR}"/iso/mount.sh
+# shellcheck source=src/lib/iso/services.sh
+source "${LIBDIR}"/iso/services.sh
+# shellcheck source=src/lib/base/yaml.sh
+source "${LIBDIR}"/base/yaml.sh
+# shellcheck source=src/lib/iso/calamares.sh
+source "${LIBDIR}"/iso/calamares.sh
+# shellcheck source=src/lib/iso/config.sh
+source "${LIBDIR}"/iso/config.sh
+# shellcheck source=src/lib/iso/firmware.sh
+source "${LIBDIR}"/iso/firmware.sh
+# shellcheck source=src/lib/iso/dracut.sh
+source "${LIBDIR}"/iso/dracut.sh
+# shellcheck source=src/lib/iso/initcpio.sh
+source "${LIBDIR}"/iso/initcpio.sh
+# shellcheck source=src/lib/iso/grub.sh
+source "${LIBDIR}"/iso/grub.sh
+# shellcheck source=src/lib/iso/squash.sh
+source "${LIBDIR}"/iso/squash.sh
+# shellcheck source=src/lib/iso/iso.sh
+source "${LIBDIR}"/iso/iso.sh
+# shellcheck source=src/lib/iso/profile.sh
+source "${LIBDIR}"/iso/profile.sh
+# shellcheck source=src/lib/iso/trap.sh
+source "${LIBDIR}"/iso/trap.sh
+
+clean_up_chroot(){
+    local path mnt="$1"
+    msg2 "Cleaning [%s]" "${mnt##*/}"
+
+    path=$mnt/boot
+    if [[ -d "$path" ]]; then
+        find "$path" -name 'initramfs*.img' -delete &> /dev/null
+    fi
+    path=$mnt/var/lib/pacman/sync
+    if [[ -d $path ]];then
+        find "$path" -type f -delete &> /dev/null
+    fi
+    path=$mnt/var/cache/pacman/pkg
+    if [[ -d $path ]]; then
+        find "$path" -type f -delete &> /dev/null
+    fi
+    path=$mnt/var/log
+    if [[ -d $path ]]; then
+        find "$path" -type f -delete &> /dev/null
+    fi
+    path=$mnt/var/tmp
+    if [[ -d $path ]];then
+        find "$path" -mindepth 1 -delete &> /dev/null
+    fi
+    path=$mnt/tmp
+    if [[ -d $path ]];then
+        find "$path" -mindepth 1 -delete &> /dev/null
+    fi
+    # shellcheck disable=2035
+    find "$mnt" -name '*.pacnew' -name '*.pacsave' -name '*.pacorig' -delete
+    if [[ -f "$mnt/boot/grub/grub.cfg" ]]; then
+        rm "$mnt"/boot/grub/grub.cfg
+    fi
+    if [[ -f "$mnt/etc/machine-id" ]]; then
+        rm "$mnt"/etc/machine-id
+    fi
+}
+
+copy_overlay(){
+    local src="$1" dest="$2"
+    if [[ -e "$src" ]];then
+        msg2 "Copying [%s] ..." "${src##*/}"
+        cp -LR "$src"/* "$dest"
+    fi
+}
+
+make_rootfs() {
+    if [[ ! -e "${work_dir}"/rootfs.lock ]]; then
+        msg "Prepare [Base installation] (rootfs)"
+        local rootfs="${work_dir}/rootfs"
+
+        prepare_dir "${rootfs}"
+
+        basestrap "${basestrap_args[@]}" "${rootfs}" "${packages[@]}"
+
+        copy_overlay "${root_overlay}" "${rootfs}"
+
+        [[ -z ${live_list} ]] && configure_chroot "${rootfs}"
+
+        clean_up_chroot "${rootfs}"
+
+        : > "${work_dir}"/rootfs.lock
+
+        msg "Done [Base installation] (rootfs)"
+    fi
+}
+
+make_livefs() {
+    if [[ ! -e ${work_dir}/livefs.lock ]]; then
+        msg "Prepare [Live installation] (livefs)"
+        local livefs="${work_dir}/livefs"
+
+        prepare_dir "${livefs}"
+
+        mount_overlayfs "${livefs}" "${work_dir}"
+
+        basestrap "${basestrap_args[@]}" "${livefs}" "${packages[@]}"
+
+        copy_overlay "${live_overlay}" "${livefs}"
+
+        configure_chroot "${livefs}"
+
+        umount_overlayfs
+
+        clean_up_chroot "${livefs}"
+
+        : > "${work_dir}"/livefs.lock
+
+        msg "Done [Live installation] (livefs)"
+    fi
+}
+
+make_bootfs() {
+    if [[ ! -e ${work_dir}/bootfs.lock ]]; then
+        msg "Prepare [/iso/boot]"
+
+        prepare_dir "${iso_root}/boot"
+
+        cp "${work_dir}"/rootfs/boot/vmlinuz* "${iso_root}"/boot/vmlinuz-"${arch}"
+
+        local bootfs="${work_dir}/bootfs"
+
+        mount_overlayfs "${bootfs}" "${work_dir}"
+
+        if "${use_dracut}"; then
+            prepare_initramfs_dracut "${bootfs}"
+        else
+            prepare_initramfs_mkinitcpio "${bootfs}"
+        fi
+
+        umount_overlayfs
+
+        rm -R "${bootfs}"
+        : > "${work_dir}"/bootfs.lock
+        msg "Done [/iso/boot]"
+    fi
+}
+
+make_grub(){
+    if [[ ! -e ${work_dir}/grub.lock ]]; then
+        msg "Prepare [/iso/boot/grub]"
+
+        local layer=${work_dir}/rootfs
+        [[ -n ${live_list} ]] && layer=${work_dir}/livefs
+
+        prepare_grub "${work_dir}/rootfs" "$layer"
+
+        if ${use_dracut}; then
+            configure_grub_dracut
+        else
+            configure_grub_mkinitcpio
+        fi
+
+        : > "${work_dir}"/grub.lock
+        msg "Done [/iso/boot/grub]"
+    fi
+}
+
+gen_iso_fn(){
+    local vars=("artix") name
+    vars+=("${profile}")
+    vars+=("${INITSYS}")
+    case "${repo}" in
+        'gremlins'|'goblins') vars+=("${repo}") ;;
+    esac
+    vars+=("${ISO_VERSION}")
+    vars+=("${arch}")
+    for n in "${vars[@]}"; do
+        name=${name:-}${name:+-}${n}
+    done
+    printf "%s\n" "$name"
+}
+
+prepare_build(){
+    load_profile
+
+    case "${repo}" in
+        buildiso) repo=default ;;
+    esac
+
+    pacman_conf="${DATADIR}/pacman.conf.d/${repo}.conf"
+    [[ -f "${USER_CONF_DIR}/pacman.conf.d/${repo}.conf" ]] && pacman_conf="${USER_CONF_DIR}/pacman.conf.d/${repo}.conf"
+
+    iso_file=$(gen_iso_fn).iso
+
+    iso_label="ARTIX_$(date +%Y%m)"
+
+    basestrap_args+=(-C "${pacman_conf}")
+    work_dir=${chroots_iso}/${profile}/artix
+
+    iso_dir="${ISO_POOL}/${profile}"
+
+    iso_root=${chroots_iso}/${profile}/iso
+    live_dir=/LiveOS
+
+    mnt_dir=${chroots_iso}/${profile}/mnt
+
+    if [[ -n "${GPG_KEY}" ]]; then
+        ${use_dracut} || export_gpg_publickey
+    fi
+}
+
+display_settings(){
+    msg "OPTIONS:"
+    msg2 "profile: %s" "${profile}"
+    msg2 "INITSYS: %s" "${INITSYS}"
+    [[ -n ${GPG_KEY} ]] && msg2 "GPG_KEY: %s" "${GPG_KEY}"
+
+    msg "ISO SETTINGS:"
+    msg2 "ISO_VERSION: %s" "${ISO_VERSION}"
+    msg2 "COMPRESSION: %s" "${COMPRESSION}"
+    [[ "${COMPRESSION}" == 'zstd' ]] && msg2 "COMPRESSION_LEVEL: %s" "${COMPRESSION_LEVEL}"
+
+    msg "BUILD:"
+    show_profile
+}
+
+mk_squash(){
+    make_sfs "${work_dir}/rootfs"
+    if [[ -d "${work_dir}/livefs" ]]; then
+        make_sfs "${work_dir}/livefs"
+    fi
+}
+
+mk_iso(){
+    touch "${iso_root}/.artix"
+    msg "Making bootable image"
+    # Sanity checks
+    [[ ! -d "${iso_root}" ]] && return 1
+    if [[ -f "${iso_dir}/${iso_file}" ]]; then
+        msg2 "Removing existing bootable image..."
+        rm -rf "${iso_dir:?}/${iso_file}"
+    fi
+    assemble_iso
+    chown -R "${owner}:$(id --group "${owner}")" "${iso_dir}"
+}
+
+mk_boot(){
+    run_safe "make_bootfs"
+    run_safe "make_grub"
+}
+
+mk_chroots(){
+    load_pkgs "${root_list}"
+    run_safe "make_rootfs"
+    if [[ -n ${live_list} ]]; then
+        load_pkgs "${live_list}"
+        run_safe "make_livefs"
+    fi
+}
+
+build(){
+    msg "Start building [%s]" "${profile}"
+    if ${clean_first};then
+        for copy in "${work_dir}"/*; do
+            [[ -d $copy ]] || continue
+            msg2 "Deleting chroot copy '%s'..." "$(basename "${copy}")"
+
+            lock 9 "$copy.lock" "Locking chroot copy '%s'" "$copy"
+
+            subvolume_delete_recursive "${copy}"
+            rm -rf --one-file-system "${copy}"
+        done
+        lock_close 9
+
+        rm -rf --one-file-system "${work_dir}"
+
+        msg "Deleting isoroot [%s] ..." "${iso_root##*/}"
+        rm -rf --one-file-system "${iso_root}"
+    fi
+
+    if ${chroot_only}; then
+        mk_chroots
+        warning "Continue squash: %s -p %s -sc ..." "${cmd}" "${profile}"
+        exit 1
+    elif ${boot_only}; then
+        mk_boot
+        warning "Continue iso: %s -p %s -zc ..." "${cmd}" "${profile}"
+        exit 1
+    elif ${squash_only}; then
+        mk_squash
+        warning "Continue boot: %s -p %s -bc ..." "${cmd}" "${profile}"
+        exit 1
+    elif ${iso_only}; then
+        [[ ! -d ${work_dir} ]] && die "Create chroot: %s -p %s -x" "${cmd}" "${profile}"
+        mk_iso
+    else
+        mk_chroots
+        mk_boot
+        mk_squash
+        mk_iso
+    fi
+    msg "Finished building [%s]" "${profile}"
+}
+
+clean_first=true
+pretend=false
+chroot_only=false
+iso_only=false
+persist=false
+use_dracut=false
+squash_only=false
+boot_only=false
+
+basestrap_args=(-GMc)
+cmd=${0##*/}
+
+repo=${cmd##*-}
+owner=${SUDO_USER:-$USER}
+profile='base'
+chroots_iso="${CHROOTS_DIR}/buildiso"
+arch=$(uname -m)
+
+usage() {
+    printf 'Usage: %s [options]\n' "${cmd}"
+    printf '    -p <profile>       Profile [default: %s]\n' "${profile}"
+    printf '    -r <dir>           Chroots directory\n'
+    printf '                       [default: %s]\n' "${chroots_iso}"
+    printf '    -t <dir>           Target directory\n'
+    printf '                       [default: %s]\n' "${ISO_POOL}"
+    printf '    -i <name>          Init system to use\n'
+    printf '                       [default: %s]\n' "${INITSYS}"
+    printf '    -g <key>           The gpg key for img signing\n'
+    printf '                       [default: none]\n'
+    printf '    -m                 Set SquashFS image mode to persistence\n'
+    printf '    -c                 Disable clean work dir\n'
+    printf '    -x                 Build chroot only\n'
+    printf '    -s                 Squash chroot only\n'
+    printf '    -b                 Generate iso boot only\n'
+    printf '    -z                 Generate iso only\n'
+    printf '                       Requires pre built images (-x)\n'
+    printf '    -d                 Use dracut instead of mkinitcpio for iso initramfs\n'
+    printf '    -q                 Query settings and pretend build\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf '\n'
+    exit "$1"
+}
+
+orig_args=("$@")
+
+opts='p:r:t:i:g:czsbxmdqh'
+
+while getopts "${opts}" arg; do
+    case "${arg}" in
+        p) profile="$OPTARG" ;;
+        r) chroots_iso="$OPTARG" ;;
+        t) ISO_POOL="$OPTARG" ;;
+        i) INITSYS="$OPTARG" ;;
+        g) GPG_KEY="$OPTARG" ;;
+        c) clean_first=false ;;
+        x) chroot_only=true ;;
+        z) iso_only=true ;;
+        s) squash_only=true ;;
+        b) boot_only=true ;;
+        m) persist=true ;;
+        d) use_dracut=true ;;
+        q) pretend=true ;;
+        h|?) usage 0 ;;
+    esac
+done
+
+shift $(( OPTIND - 1 ))
+
+prepare_build
+
+${pretend} && display_settings && exit 1
+
+check_root "" "${BASH_SOURCE[0]}" "${orig_args[@]}"
+
+prepare_dir "${mnt_dir}"
+prepare_dir "${iso_dir}"
+prepare_dir "${iso_root}"
+
+prepare_traps
+
+build

src/lib/base/chroot.sh

@@ -0,0 +1,51 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ chroot
+
+check_root() {
+    local keepenv=$1
+    shift
+    local orig_argv=("$@")
+
+    (( EUID == 0 )) && return
+    if type -P sudo >/dev/null; then
+        exec sudo --preserve-env="${keepenv}" -- "${orig_argv[@]}"
+    else
+        exec su root -c "$(printf ' %q' "${orig_argv[@]}")"
+    fi
+}
+
+
+is_btrfs() {
+    [[ -e "$1" && "$(stat -f -c %T "$1")" == btrfs ]]
+}
+
+is_subvolume() {
+    [[ -e "$1" && "$(stat -f -c %T "$1")" == btrfs && "$(stat -c %i "$1")" == 256 ]]
+}
+
+# is_same_fs() {
+#     [[ "$(stat -c %d "$1")" == "$(stat -c %d "$2")" ]]
+# }
+
+subvolume_delete_recursive() {
+    local subvol
+
+    is_subvolume "$1" || return 0
+
+    while IFS= read -d $'\0' -r subvol; do
+        if ! subvolume_delete_recursive "$subvol"; then
+            return 1
+        fi
+    done < <(find "$1" -mindepth 1 -xdev -depth -inum 256 -print0)
+    if ! btrfs subvolume delete "$1" &>/dev/null; then
+        error "Unable to delete subvolume %s" "$subvol"
+        return 1
+    fi
+
+    return 0
+}
+
+# }}}

src/lib/base/message.sh

@@ -0,0 +1,128 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ message
+
+#set +u +o posix
+
+MAKEPKG_LIBRARY=${MAKEPKG_LIBRARY:-/usr/share/makepkg}
+
+# shellcheck disable=1091
+source "${MAKEPKG_LIBRARY}"/util.sh
+
+export LANG=C
+
+if [[ -t 2 && "$TERM" != dumb ]] || [[ ${ARTOOLS_COLOR} == always ]]; then
+    colorize
+else
+    # shellcheck disable=2034
+    declare -gr ALL_OFF='' BOLD='' BLUE='' GREEN='' RED='' YELLOW=''
+fi
+
+stat_busy() {
+    local mesg=$1; shift
+    # shellcheck disable=2059
+    printf "${GREEN}==>${ALL_OFF}${BOLD} ${mesg}...${ALL_OFF}" "$@" >&2
+}
+
+stat_progress() {
+    # shellcheck disable=2059
+    printf "${BOLD}.${ALL_OFF}" >&2
+}
+
+stat_done() {
+    # shellcheck disable=2059
+    printf "${BOLD}done${ALL_OFF}\n" >&2
+}
+
+lock_close() {
+    local fd=$1
+    exec {fd}>&-
+}
+
+lock() {
+    if ! [[ "/dev/fd/$1" -ef "$2" ]]; then
+        mkdir -p -- "$(dirname -- "$2")"
+        eval "exec $1>"'"$2"'
+    fi
+    if ! flock -n "$1"; then
+        stat_busy "$3"
+        flock "$1"
+        stat_done
+    fi
+}
+
+slock() {
+    if ! [[ "/dev/fd/$1" -ef "$2" ]]; then
+        mkdir -p -- "$(dirname -- "$2")"
+        eval "exec $1>"'"$2"'
+    fi
+    if ! flock -sn "$1"; then
+        stat_busy "$3"
+        flock -s "$1"
+        stat_done
+    fi
+}
+
+_setup_workdir=false
+setup_workdir() {
+    [[ -z ${WORKDIR:-} ]] && WORKDIR=$(mktemp -d --tmpdir "${0##*/}.XXXXXXXXXX")
+    _setup_workdir=true
+    trap 'trap_abort' INT QUIT TERM HUP
+    trap 'trap_exit' EXIT
+}
+
+trap_abort() {
+    trap - EXIT INT QUIT TERM HUP
+    abort
+}
+
+trap_exit() {
+    local r=$?
+    trap - EXIT INT QUIT TERM HUP
+    cleanup $r
+}
+
+cleanup() {
+    if [[ -n ${WORKDIR:-} ]] && $_setup_workdir; then
+        rm -rf "$WORKDIR"
+    fi
+    exit "${1:-0}"
+}
+
+abort() {
+    error 'Aborting...'
+    cleanup 255
+}
+
+die() {
+    (( $# )) && error "$@"
+    cleanup 255
+}
+
+msg_success() {
+    local msg=$1
+    local padding
+    padding=$(echo "${msg}"|sed -E 's/( *).*/\1/')
+    msg=$(echo "${msg}"|sed -E 's/ *(.*)/\1/')
+    printf "%s %s\n" "${padding}${GREEN}✓${ALL_OFF}" "${msg}" >&2
+}
+
+msg_error() {
+    local msg=$1
+    local padding
+    padding=$(echo "${msg}"|sed -E 's/( *).*/\1/')
+    msg=$(echo "${msg}"|sed -E 's/ *(.*)/\1/')
+    printf "%s %s\n" "${padding}${RED}x${ALL_OFF}" "${msg}" >&2
+}
+
+msg_warn() {
+    local msg=$1
+    local padding
+    padding=$(echo "${msg}"|sed -E 's/( *).*/\1/')
+    msg=$(echo "${msg}"|sed -E 's/ *(.*)/\1/')
+    printf "%s %s\n" "${padding}${YELLOW}!${ALL_OFF}" "${msg}" >&2
+}
+
+#}}}

src/lib/base/mount.sh

@@ -0,0 +1,85 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ mount
+
+ignore_error() {
+    "$@" 2>/dev/null
+    return 0
+}
+
+trap_setup(){
+    [[ $(trap -p EXIT) ]] && die 'Error! Attempting to overwrite existing EXIT trap'
+    trap "$1" EXIT
+}
+
+chroot_mount() {
+#     msg2 "mount: [%s]" "$2"
+    mount "$@" && CHROOT_ACTIVE_MOUNTS=("$2" "${CHROOT_ACTIVE_MOUNTS[@]}")
+}
+
+chroot_add_resolv_conf() {
+    local chrootdir=$1 resolv_conf=$1/etc/resolv.conf
+
+    [[ -e /etc/resolv.conf ]] || return 0
+
+    # Handle resolv.conf as a symlink to somewhere else.
+    if [[ -L $chrootdir/etc/resolv.conf ]]; then
+        # readlink(1) should always give us *something* since we know at this point
+        # it's a symlink. For simplicity, ignore the case of nested symlinks.
+        resolv_conf=$(readlink "$chrootdir/etc/resolv.conf")
+        if [[ $resolv_conf = /* ]]; then
+            resolv_conf=$chrootdir$resolv_conf
+        else
+            resolv_conf=$chrootdir/etc/$resolv_conf
+        fi
+
+        # ensure file exists to bind mount over
+        if [[ ! -f $resolv_conf ]]; then
+            install -Dm644 /dev/null "$resolv_conf" || return 1
+        fi
+    elif [[ ! -e $chrootdir/etc/resolv.conf ]]; then
+        # The chroot might not have a resolv.conf.
+        return 0
+    fi
+
+    chroot_mount /etc/resolv.conf "$resolv_conf" --bind
+}
+
+chroot_mount_conditional() {
+    local cond=$1; shift
+    if eval "$cond"; then
+        chroot_mount "$@"
+    fi
+}
+
+chroot_setup(){
+    local mnt="$1"
+    chroot_mount_conditional "! mountpoint -q '$mnt'" "$mnt" "$mnt" --bind &&
+    chroot_mount proc "$mnt/proc" -t proc -o nosuid,noexec,nodev &&
+    chroot_mount sys "$mnt/sys" -t sysfs -o nosuid,noexec,nodev,ro &&
+    ignore_error chroot_mount_conditional "[[ -d '$mnt/sys/firmware/efi/efivars' ]]" \
+        efivarfs "$mnt/sys/firmware/efi/efivars" -t efivarfs -o nosuid,noexec,nodev &&
+    chroot_mount udev "$mnt/dev" -t devtmpfs -o mode=0755,nosuid &&
+    chroot_mount devpts "$mnt/dev/pts" -t devpts -o mode=0620,gid=5,nosuid,noexec &&
+    chroot_mount shm "$mnt/dev/shm" -t tmpfs -o mode=1777,nosuid,nodev &&
+    chroot_mount /run "$mnt/run" -t tmpfs -o nosuid,nodev,mode=0755 &&
+    chroot_mount tmp "$mnt/tmp" -t tmpfs -o mode=1777,strictatime,nodev,nosuid
+}
+
+chroot_api_mount() {
+    CHROOT_ACTIVE_MOUNTS=()
+    trap_setup chroot_api_umount
+    chroot_setup "$1"
+}
+
+chroot_api_umount() {
+    if (( ${#CHROOT_ACTIVE_MOUNTS[@]} )); then
+#         msg2 "umount: [%s]" "${CHROOT_ACTIVE_MOUNTS[@]}"
+        umount "${CHROOT_ACTIVE_MOUNTS[@]}"
+    fi
+    unset CHROOT_ACTIVE_MOUNTS
+}
+
+#}}}

src/lib/base/util.sh

@@ -0,0 +1,44 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ base conf
+
+prepare_dir(){
+    [[ ! -d $1 ]] && mkdir -p "$1"
+    return 0
+}
+
+if [[ -n $SUDO_USER ]]; then
+    eval "USER_HOME=~$SUDO_USER"
+else
+    USER_HOME=$HOME
+fi
+
+USER_CONF_DIR="${XDG_CONFIG_HOME:-$USER_HOME/.config}/artools"
+
+prepare_dir "${USER_CONF_DIR}"
+
+load_base_config(){
+
+    local conf="$1/artools-base.conf"
+
+    [[ -f "$conf" ]] || return 1
+
+    # shellcheck source=config/conf/artools-base.conf
+    [[ -r "$conf" ]] && source "$conf"
+
+    CHROOTS_DIR=${CHROOTS_DIR:-'/var/lib/artools'}
+
+    WORKSPACE_DIR=${WORKSPACE_DIR:-"${USER_HOME}/artools-workspace"}
+
+    return 0
+}
+
+#}}}
+
+
+load_base_config "${USER_CONF_DIR}" || load_base_config "${SYSCONFDIR}"
+
+prepare_dir "${WORKSPACE_DIR}"
+

src/lib/base/yaml.sh

@@ -0,0 +1,30 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ yaml
+
+write_yaml_header(){
+    printf '%s\n' '---'
+}
+
+write_empty_line(){
+    printf '\n'
+}
+
+write_yaml_map(){
+    local ident="$1" key="$2" val="$3"
+    printf "\n%${ident}s%s: %s\n" '' "$key" "$val"
+}
+
+write_yaml_seq(){
+    local ident="$1" val="$2"
+    printf "\n%${ident}s- %s\n" '' "$val"
+}
+
+write_yaml_seq_map(){
+    local ident="$1" key="$2" val="$3"
+    printf "\n%${ident}s- %s: %s\n" '' "$key" "$val"
+}
+
+#}}}

src/lib/iso/calamares.sh

@@ -0,0 +1,57 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ calamares
+
+write_services_conf(){
+    local key1="$1" val1="$2" key2="$3" val2="$4"
+    local yaml
+    yaml=$(write_yaml_header)
+    yaml+=$(write_yaml_map 0 "$key1" "$val1")
+    yaml+=$(write_yaml_map 0 "$key2" "$val2")
+    yaml+=$(write_yaml_map 0 'services')
+    for svc in "${SERVICES[@]}"; do
+        yaml+=$(write_yaml_seq 2 "$svc")
+    done
+    yaml+=$(write_empty_line)
+    printf '%s\n' "${yaml}"
+}
+
+write_services_openrc_conf(){
+    local conf="$1"/services-openrc.conf
+    write_services_conf 'initdDir' '/etc/init.d' 'runlevelsDir' '/etc/runlevels' > "$conf"
+}
+
+write_services_runit_conf(){
+    local conf="$1"/services-runit.conf
+    write_services_conf 'svDir' '/etc/runit/sv' 'runsvDir' '/etc/runit/runsvdir' > "$conf"
+}
+
+write_services_s6_conf(){
+    local conf="$1"/services-s6.conf
+    write_services_conf 'svDir' '/etc/s6/sv' 'dbDir' '/etc/s6/rc/compiled' > "$conf"
+    printf '%s\n' "defaultBundle: default" >> "$conf"
+}
+
+write_services_suite66_conf(){
+    local conf="$1"/services-suite66.conf
+    write_services_conf 'svDir' '/etc/66/service' 'runsvDir' '/var/lib/66/system' > "$conf"
+}
+
+write_services_dinit_conf(){
+    local conf="$1"/services-dinit.conf
+    write_services_conf 'initdDir' '/etc/dinit.d' 'runsvDir' '/etc/dinit.d/boot.d' > "$conf"
+}
+
+configure_calamares(){
+    local mods="$1/etc/calamares/modules"
+    if [[ -d "$mods" ]];then
+        msg2 "Configuring: Calamares"
+        write_services_"${INITSYS}"_conf "$mods"
+        sed -e "s|services-openrc|services-${INITSYS}|" \
+            -i "$1"/etc/calamares/settings.conf
+    fi
+}
+
+#}}}

src/lib/iso/config.sh

@@ -0,0 +1,32 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ session
+
+configure_services(){
+    local mnt="$1"
+    add_svc_"${INITSYS}" "$mnt" "${SERVICES[*]}"
+}
+
+
+write_live_session_conf(){
+    local conf=''
+    conf+=$(printf '%s\n' '# live session configuration')
+    conf+=$(printf "\nAUTOLOGIN=%s\n" "${AUTOLOGIN}")
+    conf+=$(printf "\nPASSWORD=%s\n" "${PASSWORD}")
+    printf '%s' "$conf"
+}
+
+configure_chroot(){
+    local fs="$1"
+    msg "Configuring [%s]" "${fs##*/}"
+    configure_services "$fs"
+    configure_calamares "$fs"
+    [[ ! -d "$fs/etc/artools" ]] && mkdir -p "$fs/etc/artools"
+    msg2 "Writing: live.conf"
+    write_live_session_conf > "$fs/etc/artools/live.conf"
+    msg "Done configuring [%s]" "${fs##*/}"
+}
+
+#}}}

src/lib/iso/dracut.sh

@@ -0,0 +1,44 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ dracut
+
+prepare_initramfs_dracut(){
+    local mnt="$1"
+    local kver
+    kver=$(<"$mnt"/usr/src/linux/version)
+
+    printf "%s\n" 'add_dracutmodules+=" dmsquash-live"' > "$mnt"/etc/dracut.conf.d/50-live.conf
+
+    msg "Starting build: %s" "${kver}"
+    artix-chroot "$mnt" dracut -fqM /boot/initramfs.img "$kver"
+    msg "Image generation successful"
+
+    cp "$mnt"/boot/initramfs.img "${iso_root}"/boot/initramfs-"${arch}".img
+
+    prepare_boot_extras "$mnt"
+}
+
+configure_grub_dracut(){
+    msg "Configuring grub kernel options ..."
+    local kopts=()
+    kopts=(
+        "root=live:LABEL=${iso_label}"
+        'rd.live.squashimg=rootfs.img'
+        'rd.live.image'
+        'rootflags=auto'
+    )
+    [[ "${profile}" != 'base' ]] && kopts+=("rd.live.join=livefs.img")
+
+    local ro_opts=()
+    local rw_opts=()
+#         'rd.writable.fsimg=1'
+
+    sed -e "s|@kopts@|${kopts[*]}|" \
+        -e "s|@ro_opts@|${ro_opts[*]}|" \
+        -e "s|@rw_opts@|${rw_opts[*]}|" \
+        -i "${iso_root}"/boot/grub/kernels.cfg
+}
+
+#}}}

src/lib/iso/firmware.sh

@@ -0,0 +1,19 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ firmware
+
+prepare_boot_extras(){
+    local src="$1" dest
+    dest=${iso_root}/boot
+
+    for fw in intel amd; do
+        cp "$src"/boot/"$fw"-ucode.img "$dest/$fw"-ucode.img
+    done
+
+    cp "$src"/boot/memtest86+/memtest.bin "$dest"/memtest
+    cp "$src"/usr/share/licenses/common/GPL2/license.txt "$dest"/memtest.COPYING
+}
+
+#}}}

src/lib/iso/grub.sh

@@ -0,0 +1,64 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ grub
+
+prepare_grub(){
+    local platform=i386-pc img='core.img' prefix=/boot/grub
+    local lib="$1"/usr/lib/grub
+    local theme="$1"/usr/share/grub
+    local livecfg="$2"/usr/share/grub
+    local grub
+    grub=${iso_root}/boot/grub efi=${iso_root}/efi/boot
+
+    prepare_dir "${grub}/${platform}"
+
+    cp "${livecfg}"/cfg/*.cfg "${grub}"
+
+    cp "${lib}/${platform}"/* "${grub}/${platform}"
+
+    msg2 "Building %s ..." "${img}"
+
+    grub-mkimage -d "${grub}/${platform}" -o "${grub}/${platform}/${img}" -O "${platform}" -p "${prefix}" biosdisk iso9660
+
+    cat "${grub}/${platform}"/cdboot.img "${grub}/${platform}/${img}" > "${grub}/${platform}"/eltorito.img
+
+    platform=x86_64-efi
+    img=bootx64.efi
+
+    prepare_dir "${efi}"
+    prepare_dir "${grub}/${platform}"
+
+    cp "${lib}/${platform}"/* "${grub}/${platform}"
+
+    msg2 "Building %s ..." "${img}"
+
+    grub-mkimage -d "${grub}/${platform}" -o "${efi}/${img}" -O "${platform}" -p "${prefix}" iso9660
+
+    prepare_dir "${grub}"/themes
+
+    cp -r "${theme}"/themes/artix "${grub}"/themes
+    cp -r "${livecfg}"/{locales,tz} "${grub}"
+
+    if [[ -f /usr/share/grub/unicode.pf2 ]];then
+        msg2 "Copying %s ..." "unicode.pf2"
+        cp /usr/share/grub/unicode.pf2 "${grub}"/unicode.pf2
+    else
+        msg2 "Creating %s ..." "unicode.pf2"
+        grub-mkfont -o "${grub}"/unicode.pf2 /usr/share/fonts/misc/unifont.bdf
+    fi
+
+    local size=4M mnt="${mnt_dir}/efiboot" efi_img="${iso_root}/boot/efi.img"
+    msg2 "Creating fat image of %s ..." "${size}"
+    truncate -s "${size}" "${efi_img}"
+    mkfs.fat -n ARTIX_EFI "${efi_img}" &>/dev/null
+    prepare_dir "${mnt}"
+    mount_img "${efi_img}" "${mnt}"
+    prepare_dir "${mnt}"/efi/boot
+    msg2 "Building %s ..." "${img}"
+    grub-mkimage -d "${grub}/${platform}" -o "${mnt}"/efi/boot/"${img}" -O "${platform}" -p "${prefix}" iso9660
+    umount_img "${mnt}"
+}
+
+#}}}

src/lib/iso/initcpio.sh

@@ -0,0 +1,74 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ initcpio
+
+make_checksum(){
+    local file="$1"
+    msg2 "Creating md5sum ..."
+    cd "${iso_root}${live_dir}"
+    md5sum "$file" > "$file".md5
+    cd "${OLDPWD}"
+}
+
+make_sig () {
+    local file="$1"
+    msg2 "Creating signature file..."
+    chown "${owner}:$(id --group "${owner}")" "${iso_root}${live_dir}"
+    su "${owner}" -c "gpg --detach-sign --output $file.sig --default-key ${GPG_KEY} $file"
+    chown "root:root" "${iso_root}${live_dir}"
+}
+
+export_gpg_publickey() {
+    key_export=${WORKSPACE_DIR}/pubkey.gpg
+    if [[ ! -e "${key_export}" ]]; then
+        gpg --batch --output "${key_export}" --export "${GPG_KEY}"
+    fi
+}
+
+prepare_initramfs_mkinitcpio() {
+    local mnt="$1" packages=() mkinitcpio_conf k
+
+    mkinitcpio_conf=mkinitcpio-default.conf
+    [[ "${profile}" == 'base' ]] && mkinitcpio_conf=mkinitcpio-pxe.conf
+    k=$(<"$mnt"/usr/src/linux/version)
+
+    read_from_list "${common_dir}/Packages-boot"
+    basestrap "${basestrap_args[@]}" "$mnt" "${packages[@]}"
+
+    if [[ -n "${GPG_KEY}" ]]; then
+        exec {ARTIX_GNUPG_FD}<>"${key_export}"
+        export ARTIX_GNUPG_FD
+    fi
+
+    artix-chroot "$mnt" mkinitcpio -k "$k" \
+        -c /etc/"$mkinitcpio_conf" \
+        -g /boot/initramfs.img
+
+    if [[ -n "${GPG_KEY}" ]]; then
+        exec {ARTIX_GNUPG_FD}<&-
+        unset ARTIX_GNUPG_FD
+    fi
+    if [[ -f "${key_export}" ]]; then
+        rm "${key_export}"
+    fi
+    cp "$mnt"/boot/initramfs.img "${iso_root}"/boot/initramfs-"${arch}".img
+    prepare_boot_extras "$mnt"
+}
+
+configure_grub_mkinitcpio() {
+    msg "Configuring grub kernel options ..."
+    local ro_opts=()
+    local rw_opts=()
+    local kopts=("label=${iso_label}")
+
+    [[ "${profile}" != 'base' ]] && kopts+=('overlay=livefs')
+
+    sed -e "s|@kopts@|${kopts[*]}|" \
+        -e "s|@ro_opts@|${ro_opts[*]}|" \
+        -e "s|@rw_opts@|${rw_opts[*]}|" \
+        -i "${iso_root}"/boot/grub/kernels.cfg
+}
+
+#}}}

src/lib/iso/iso.sh

@@ -0,0 +1,52 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ iso
+
+get_disturl(){
+    # shellcheck disable=1091
+    . /usr/lib/os-release
+    printf "%s\n" "${HOME_URL}"
+}
+
+get_osname(){
+    # shellcheck disable=1091
+    . /usr/lib/os-release
+    printf "%s\n" "${NAME}"
+}
+
+assemble_iso(){
+    msg "Creating ISO image..."
+    local mod_date
+    mod_date=$(date -u +%Y-%m-%d-%H-%M-%S-00  | sed -e s/-//g)
+    local appid
+    appid="$(get_osname) Live/Rescue CD"
+    local publisher
+    publisher="$(get_osname) <$(get_disturl)>"
+
+    xorriso -as mkisofs \
+        --modification-date="${mod_date}" \
+        --protective-msdos-label \
+        -volid "${iso_label}" \
+        -appid "${appid}" \
+        -publisher "${publisher}" \
+        -preparer "Prepared by artools/${0##*/}" \
+        -r -graft-points -no-pad \
+        --sort-weight 0 / \
+        --sort-weight 1 /boot \
+        --grub2-mbr "${iso_root}"/boot/grub/i386-pc/boot_hybrid.img \
+        -partition_offset 16 \
+        -b boot/grub/i386-pc/eltorito.img \
+        -c boot.catalog \
+        -no-emul-boot -boot-load-size 4 -boot-info-table --grub2-boot-info \
+        -eltorito-alt-boot \
+        -append_partition 2 0xef "${iso_root}"/boot/efi.img \
+        -e --interval:appended_partition_2:all:: -iso_mbr_part_type 0x00 \
+        -no-emul-boot \
+        -iso-level 3 \
+        -o "${iso_dir}/${iso_file}" \
+        "${iso_root}"/
+}
+
+#}}}

src/lib/iso/mount.sh

@@ -0,0 +1,57 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ mount
+
+track_img() {
+    msg2 "mount: [%s]" "$2"
+    mount "$@" && IMG_ACTIVE_MOUNTS=("$2" "${IMG_ACTIVE_MOUNTS[@]}")
+}
+
+mount_img() {
+    IMG_ACTIVE_MOUNTS=()
+    mkdir -p "$2"
+    track_img "$1" "$2"
+}
+
+umount_img() {
+    if [[ -n "${IMG_ACTIVE_MOUNTS[*]}" ]];then
+        msg2 "umount: [%s]" "${IMG_ACTIVE_MOUNTS[@]}"
+        umount "${IMG_ACTIVE_MOUNTS[@]}"
+        unset IMG_ACTIVE_MOUNTS
+        rm -r "$1"
+    fi
+}
+
+track_fs() {
+    msg2 "overlayfs mount: [%s]" "$5"
+    mount "$@" && FS_ACTIVE_MOUNTS=("$5" "${FS_ACTIVE_MOUNTS[@]}")
+}
+
+mount_overlayfs(){
+    FS_ACTIVE_MOUNTS=()
+    local lower upper="$1" work="$2"
+    mkdir -p "${mnt_dir}/work"
+    mkdir -p "$upper"
+    case $upper in
+        */livefs) lower="$work/rootfs" ;;
+        */bootfs)
+            lower="$work/rootfs"
+            [[ -d "$work/livefs" ]] && lower="$work/livefs:$work/rootfs"
+        ;;
+    esac
+    # shellcheck disable=2140
+    track_fs -t overlay overlay -olowerdir="$lower",upperdir="$upper",workdir="${mnt_dir}/work" "$upper"
+}
+
+umount_overlayfs(){
+    if [[ -n "${FS_ACTIVE_MOUNTS[*]}" ]];then
+        msg2 "overlayfs umount: [%s]" "${FS_ACTIVE_MOUNTS[@]}"
+        umount "${FS_ACTIVE_MOUNTS[@]}"
+        unset FS_ACTIVE_MOUNTS
+        rm -rf "${mnt_dir}/work"
+    fi
+}
+
+#}}}

src/lib/iso/profile.sh

@@ -0,0 +1,95 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ profile
+
+show_profile(){
+    msg2 "iso_file: %s" "${iso_file}"
+    msg2 "AUTOLOGIN: %s" "${AUTOLOGIN}"
+    msg2 "PASSWORD: %s" "${PASSWORD}"
+    msg2 "SERVICES: %s" "${SERVICES[*]}"
+}
+
+load_profile(){
+    local profile_dir="${DATADIR}/iso-profiles"
+    [[ -d "${WORKSPACE_DIR}"/iso-profiles ]] && profile_dir="${WORKSPACE_DIR}"/iso-profiles
+
+    root_list="$profile_dir/${profile}/Packages-Root"
+    root_overlay="$profile_dir/${profile}/root-overlay"
+
+    [[ -f "$profile_dir/${profile}/Packages-Live" ]] && live_list="$profile_dir/${profile}/Packages-Live"
+    [[ -d "$profile_dir/${profile}/live-overlay" ]] && live_overlay="$profile_dir/${profile}/live-overlay"
+
+    common_dir="${DATADIR}/iso-profiles/common"
+    [[ -d "$profile_dir"/common ]] && common_dir="${profile_dir}"/common
+
+    [[ -f $profile_dir/${profile}/profile.conf ]] || return 1
+
+    # shellcheck disable=1090
+    [[ -r "$profile_dir/${profile}"/profile.conf ]] && . "$profile_dir/${profile}"/profile.conf
+
+    AUTOLOGIN=${AUTOLOGIN:-true}
+
+    PASSWORD=${PASSWORD:-'artix'}
+
+    if [[ -z "${SERVICES[*]}" ]];then
+        SERVICES=('acpid' 'bluetoothd' 'cronie' 'cupsd' 'syslog-ng' 'connmand')
+    fi
+
+    return 0
+}
+
+read_from_list() {
+    local list="$1"
+    local _space="s| ||g"
+    local _clean=':a;N;$!ba;s/\n/ /g'
+    local _com_rm="s|#.*||g"
+    local _init="s|@initsys@|${INITSYS}|g"
+    local pkgs
+
+    mapfile -t pkgs < <(sed "$_com_rm" "$list" \
+            | sed "$_space" \
+            | sed "$_init" \
+            | sed "$_clean")
+
+    printf "%s\n" "${pkgs[@]}"
+}
+
+read_from_services() {
+    for svc in "${SERVICES[@]}"; do
+        case "$svc" in
+            sddm|gdm|lightdm|mdm|greetd|lxdm|xdm)
+                packages+=("$svc-${INITSYS}"); display_manager="$svc" ;;
+            NetworkManager) packages+=("networkmanager-${INITSYS}") ;;
+            connmand) packages+=("connman-${INITSYS}") ;;
+            cupsd) packages+=("cups-${INITSYS}") ;;
+            bluetoothd) packages+=("bluez-${INITSYS}") ;;
+            syslog-ng|metalog) packages+=("$svc-${INITSYS}") ;;
+        esac
+    done
+}
+
+load_pkgs(){
+    local pkglist="$1"
+    packages=()
+
+    if [[ "${pkglist##*/}" == "Packages-Root" ]]; then
+        for l in base apps "${INITSYS}"; do
+            msg2 "Loading Packages: [%s] ..." "Packages-${l}"
+            packages+=($(read_from_list "${common_dir}/Packages-${l}"))
+        done
+        if [[ -n "${live_list}" ]]; then
+            msg2 "Loading Packages: [%s] ..." "Packages-xorg"
+            packages+=($(read_from_list "${common_dir}/Packages-xorg"))
+        fi
+        msg2 "Loading Packages: [%s] ..." "${pkglist##*/}"
+        packages+=($(read_from_list "${pkglist}"))
+        read_from_services
+    else
+        msg2 "Loading Packages: [%s] ..." "${pkglist##*/}"
+        packages+=($(read_from_list "${pkglist}"))
+    fi
+}
+
+#}}}

src/lib/iso/services.sh

@@ -0,0 +1,70 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ services
+
+add_svc_openrc(){
+    local mnt="$1" names="$2" rlvl="${3:-default}"
+    for svc in $names; do
+        if [[ -f $mnt/etc/init.d/$svc ]];then
+            msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
+            chroot "$mnt" rc-update add "$svc" "$rlvl" &>/dev/null
+        fi
+    done
+}
+
+add_svc_runit(){
+    local mnt="$1" names="$2" rlvl="${3:-default}"
+    for svc in $names; do
+        if [[ -d $mnt/etc/runit/sv/$svc ]]; then
+            msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
+            chroot "$mnt" ln -s /etc/runit/sv/"$svc" /etc/runit/runsvdir/"$rlvl" &>/dev/null
+        fi
+    done
+}
+
+add_svc_s6(){
+    local mnt="$1" names="$2" rlvl="${3:-default}" dep
+    dep="$mnt"/etc/s6/sv/"$display_manager"-srv/dependencies.d
+    for svc in $names; do
+        msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
+        chroot "$mnt" s6-service add "$rlvl" "$svc"
+        if [[ "$svc" == "$display_manager" ]]; then
+            if [[ -d "$dep" ]]; then
+                touch "$dep"/artix-live
+            fi
+        fi
+    done
+
+    chroot "$mnt" s6-db-reload -r
+
+    local src=/etc/s6/current skel=/etc/s6/skel getty='/usr/bin/agetty -L -8 tty7 115200'
+    # rebuild s6-linux-init binaries
+    chroot "$mnt" rm -r "$src"
+    chroot "$mnt" s6-linux-init-maker -1 -N -f "$skel" -G "$getty" -c "$src" "$src"
+    chroot "$mnt" mv "$src"/bin/init "$src"/bin/s6-init
+    chroot "$mnt" cp -a "$src"/bin /usr
+}
+
+add_svc_suite66(){
+    local mnt="$1" names="$2"
+    for svc in $names; do
+        if [[ -f "$mnt"/etc/66/service/"$svc" ]]; then
+            msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
+            chroot "$mnt" 66-enable -t default "$svc" &>/dev/null
+        fi
+    done
+}
+
+add_svc_dinit(){
+    local mnt="$1" names="$2"
+    for svc in $names; do
+        if [[ -d $mnt/etc/dinit.d/boot.d ]]; then
+            msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
+            chroot "$mnt" ln -s ../"$svc" /etc/dinit.d/boot.d/"$svc" &>/dev/null
+        fi
+    done
+}
+
+#}}}

src/lib/iso/squash.sh

@@ -0,0 +1,88 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ squash
+
+make_ext_img(){
+    local src="$1"
+    local size=32G
+    local mnt="${mnt_dir}/${src##*/}"
+    mkdir -p "${work_dir}"/embed"${live_dir}"
+    local extimg="${work_dir}/embed${live_dir}/${src##*/}".img
+
+    msg2 "Creating ext4 image of %s ..." "${size}"
+    truncate -s ${size} "${extimg}"
+    local ext4_args=()
+    ext4_args+=("-O ^has_journal,^resize_inode" -E lazy_itable_init=0 -m 0)
+    mkfs.ext4 "${ext4_args[@]}" -F "${extimg}" &>/dev/null
+    tune2fs -c 0 -i 0 "${extimg}" &> /dev/null
+    mount_img "${extimg}" "${mnt}"
+    msg2 "Copying %s ..." "${src}/"
+    cp -aT "${src}/" "${mnt}/"
+    umount_img "${mnt}"
+}
+
+has_changed(){
+    local src="$1" dest="$2"
+    if [[ -f "${dest}" ]]; then
+        local has_changes
+        has_changes=$(find "${src}" -newer "${dest}")
+        if [[ -n "${has_changes}" ]]; then
+            msg2 "Possible changes for %s ..." "${src}"
+            msg2 "%s" "${has_changes}"
+            msg2 "SquashFS image %s is not up to date, rebuilding..." "${dest}"
+            rm "${dest}"
+        else
+            msg2 "SquashFS image %s is up to date, skipping." "${dest}"
+            return 1
+        fi
+    fi
+}
+
+# $1: image path
+make_sfs() {
+    local sfs_in="$1"
+    if [[ ! -e "${sfs_in}" ]]; then
+        error "The path %s does not exist" "${sfs_in}"
+        retrun 1
+    fi
+
+    mkdir -p "${iso_root}${live_dir}"
+
+    local img_name=${sfs_in##*/}.img
+
+    local sfs_out="${iso_root}${live_dir}/${img_name}"
+
+    if has_changed "${sfs_in}" "${sfs_out}"; then
+
+        msg "Generating SquashFS image for %s" "${sfs_in}"
+
+        local mksfs_args=()
+
+        if ${persist};then
+            make_ext_img "${sfs_in}"
+            mksfs_args+=("${work_dir}/embed")
+        else
+            mksfs_args+=("${sfs_in}")
+        fi
+
+        mksfs_args+=("${sfs_out}")
+
+        mksfs_args+=(-comp "${COMPRESSION}" "${COMPRESSION_ARGS[@]}" -noappend)
+
+        mksquashfs "${mksfs_args[@]}"
+
+        if ! ${use_dracut}; then
+            make_checksum "${img_name}"
+            if [[ -n ${GPG_KEY} ]];then
+                make_sig "${iso_root}${live_dir}/${img_name}"
+            fi
+        fi
+        if ${persist}; then
+            rm -r "${work_dir}/embed"
+        fi
+    fi
+}
+
+#}}}

src/lib/iso/trap.sh

@@ -0,0 +1,50 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ trap
+
+error_function() {
+    local func="$1"
+    # first exit all subshells, then print the error
+    if (( ! BASH_SUBSHELL )); then
+        error "A failure occurred in %s()." "$func"
+        plain "Aborting..."
+    fi
+    umount_overlayfs
+    umount_img
+    exit 2
+}
+
+run_safe() {
+    local restoretrap func="$1"
+    set -e
+    set -E
+    restoretrap=$(trap -p ERR)
+    trap 'error_function $func' ERR
+
+    "$func"
+
+    eval "$restoretrap"
+    set +E
+    set +e
+}
+
+trap_exit() {
+    local sig=$1; shift
+    error "$@"
+    umount_overlayfs
+    trap -- "$sig"
+    kill "-$sig" "$$"
+}
+
+prepare_traps(){
+    for sig in TERM HUP QUIT; do
+        # shellcheck disable=2064
+        trap "trap_exit $sig \"$(gettext "%s signal caught. Exiting...")\" \"$sig\"" "$sig"
+    done
+    trap 'trap_exit INT "$(gettext "Aborted by user! Exiting...")"' INT
+#     trap 'trap_exit USR1 "$(gettext "An unknown error has occurred. Exiting...")"' ERR
+}
+
+#}}}

src/lib/iso/util.sh

@@ -0,0 +1,43 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ iso conf
+
+load_iso_config(){
+
+    local conf="$1/artools-iso.conf"
+
+    [[ -f "$conf" ]] || return 1
+
+    # shellcheck source=config/conf/artools-iso.conf
+    [[ -r "$conf" ]] && source "$conf"
+
+    ISO_POOL=${ISO_POOL:-"${WORKSPACE_DIR}/iso"}
+
+    ISO_VERSION=${ISO_VERSION:-"$(date +%Y%m%d)"}
+
+    INITSYS=${INITSYS:-'openrc'}
+
+    GPG_KEY=${GPG_KEY:-''}
+
+    COMPRESSION="${COMPRESSION:-zstd}"
+
+    COMPRESSION_LEVEL="${COMPRESSION_LEVEL:-15}"
+
+    if [[ -z "${COMPRESSION_ARGS[*]}" ]]; then
+        COMPRESSION_ARGS=(-Xcompression-level "${COMPRESSION_LEVEL}")
+    fi
+
+    if [[ "${COMPRESSION}" == 'xz' ]]; then
+        COMPRESSION_ARGS=(-Xbcj x86)
+    fi
+
+    return 0
+}
+
+#}}}
+
+load_iso_config "${USER_CONF_DIR}" || load_iso_config "${SYSCONFDIR}"
+
+prepare_dir "${ISO_POOL}"

src/lib/pkg/api/gitea.sh

@@ -0,0 +1,173 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ gitea api
+
+get_compliant() {
+    local name=$1
+    printf "%s" "${name}" \
+    | sed -E 's/([a-zA-Z0-9]+)\+([a-zA-Z]+)/\1-\2/g' \
+    | sed -E 's/\+/plus/g' \
+    | sed -E 's/[^a-zA-Z0-9_\-\.]/-/g' \
+    | sed -E 's/[_\-]{2,}/-/g'
+}
+
+get_compliant_name(){
+    local gitname="$1"
+    case "$gitname" in
+        *+) gitname=${gitname//+/plus} ;;
+        *+*) gitname=${gitname//+/-} ;;
+    esac
+    printf "%s\n" "$gitname"
+}
+
+api_put() {
+    curl -s -X PUT "$@"
+}
+
+api_delete() {
+    curl -s -X DELETE "$@"
+}
+
+api_post() {
+    curl -s -X POST "$@"
+}
+
+api_patch() {
+    curl -s -X PATCH "$@"
+}
+
+api_get() {
+    curl -s -X GET "$@"
+}
+
+add_team_to_repo() {
+    local pkgbase="$1"
+    local team="$2"
+    local url
+    url="${GIT_HTTPS}/api/v1/repos/${GIT_ORG}/$pkgbase/teams/$team"
+
+    stat_busy "Adding team ($team) to package repo [$pkgbase]"
+    api_put "$url" \
+        -H "accept: application/json" \
+        -H "Authorization: token ${GIT_TOKEN}"
+    stat_done
+}
+
+remove_team_from_repo() {
+    local pkgbase="$1"
+    local team="$2"
+    local url
+    url="${GIT_HTTPS}/api/v1/repos/${GIT_ORG}/$pkgbase/teams/$team"
+
+    stat_busy "Removing team ($team) from package repo [$pkgbase]"
+    api_delete "$url" \
+        -H "accept: application/json" \
+        -H "Authorization: token ${GIT_TOKEN}"
+    stat_done
+}
+
+create_repo() {
+    local pkgbase="$1"
+    local url json
+    url="${GIT_HTTPS}/api/v1/org/${GIT_ORG}/repos"
+    json="{ \"auto_init\": true, \"name\": \"$pkgbase\", \"gitignores\": \"ArtixLinuxPackages\", \"readme\": \"Default\" }"
+
+    stat_busy "Create package repo [$pkgbase] in org (${GIT_ORG})"
+    api_post "$url" \
+        -H "accept: application/json" \
+        -H "content-type: application/json" \
+        -H "Authorization: token ${GIT_TOKEN}" \
+        -d "$json"
+    stat_done
+}
+
+transfer_repo() {
+    local pkgbase="$1"
+    local new_owner="$2"
+    local json url
+    json="{ \"new_owner\": \"$new_owner\",  \"team_ids\": [] }"
+    url="${GIT_HTTPS}/api/v1/repos/${GIT_ORG}/$pkgbase/transfer"
+
+    stat_busy "Transfer package repo [$pkgbase] in org ($new_owner)"
+    api_post "$url" \
+        -H "accept: application/json" \
+        -H "Content-Type: application/json" \
+        -H "Authorization: token ${GIT_TOKEN}" \
+        -d "$json"
+    stat_done
+}
+
+list_all_repos() {
+    local url
+    url="${GIT_HTTPS}/api/v1/orgs/${GIT_ORG}/repos?limit=10000"
+
+    api_get "$url" \
+        -H "accept: application/json"
+}
+
+replace_topic() {
+    local url
+    local repo="$1"
+    local maintainer="$2"
+    url="${GIT_HTTPS}/api/v1/repos/${GIT_ORG}/$repo/topics"
+
+    api_put "$url" \
+        -H "accept: application/json" \
+        -H "Content-Type: application/json" \
+        -H "Authorization: token ${GIT_TOKEN}" \
+        -d "{
+                \"topics\": [
+                    \"${maintainer}\"
+                ]
+            }"
+}
+
+list_topics() {
+    local url
+    local pkgbase="$1"
+    url="${GIT_HTTPS}/api/v1/repos/${GIT_ORG}/$pkgbase/topics"
+
+    api_get "$url" \
+        -H "accept: application/json"
+}
+
+add_topic() {
+    local url
+    local pkgbase="$1"
+    local topic="$2"
+    url="${GIT_HTTPS}/api/v1/repos/${GIT_ORG}/$pkgbase/topics/$topic"
+
+    stat_busy "Add topic ($topic) to [$pkgbase]"
+    api_put "$url" \
+        -H "accept: application/json" \
+        -H "Authorization: token ${GIT_TOKEN}"
+    stat_done
+}
+
+remove_topic() {
+    local url
+    local pkgbase="$1"
+    local topic="$2"
+    url="${GIT_HTTPS}/api/v1/repos/${GIT_ORG}/$pkgbase/topics/$topic"
+
+    stat_busy "Remove topic ($topic) from [$pkgbase]"
+    api_delete "$url" \
+        -H "accept: application/json" \
+        -H "Authorization: token ${GIT_TOKEN}"
+    stat_done
+}
+
+search_topic() {
+    local search="$1"
+    local url
+    url="${GIT_HTTPS}/api/v1/repos/search?q=${search}&topic=true&includeDesc=false&private=false&is_private=false&template=false&archived=false&order=asc&limit=10000"
+
+    stat_busy "Query for topic (${search})"
+    api_get "$url" \
+        -H 'accept: application/json'
+    stat_done
+}
+
+#}}}

src/lib/pkg/db/db.sh

@@ -0,0 +1,287 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+readonly ARTIX_DB=(
+    system-goblins
+    system-gremlins
+    system
+    world-goblins
+    world-gremlins
+    world
+    lib32-goblins
+    lib32-gremlins
+    lib32
+    galaxy-goblins
+    galaxy-gremlins
+    galaxy
+)
+
+readonly REPO_DB='.artixlinux/pkgbase.yaml'
+
+yaml_array() {
+    local array
+
+    for entry in "$@"; do
+        array="${array:-}${array:+,} ${entry}"
+    done
+    printf "%s\n" "[${array}]"
+}
+
+print_package_names() {
+    local version
+    local architecture pkg
+    version=$(get_full_version)
+    for pkg in "${pkgname[@]}"; do
+        architecture=$(get_pkg_arch "${pkg}")
+        printf "%s-%s-%s%s\n" "$pkg" "$version" "$architecture" "$PKGEXT"
+    done
+}
+
+print_debug_package_names() {
+    local version
+    local architecture
+    version=$(get_full_version)
+    if check_option "debug" "y" && check_option "strip" "y"; then
+        architecture=$(get_pkg_arch)
+        printf "%s-%s-%s-%s%s\n" "$pkgbase" "debug" "$version" "$architecture" "$PKGEXT"
+    fi
+}
+
+version_from_yaml() {
+    local dest="$1"
+    local version repo
+    repo=".repos.${dest}"
+    version=$(repo="${repo}" yq -r 'eval(strenv(repo)).version' "${REPO_DB}")
+    printf "%s\n" "${version}"
+}
+
+packages_from_yaml() {
+    local dest="$1"
+    local repo pkgs packages
+    repo=".repos.${dest}"
+    mapfile -t packages < <(repo="${repo}" yq -r 'eval(strenv(repo)).packages[]' "${REPO_DB}")
+    for p in "${packages[@]}"; do
+        pkgs="${pkgs:-}${pkgs:+,} ${p}"
+    done
+    printf "%s\n" "[${pkgs}]"
+}
+
+to_bool() {
+    local int="$1"
+    case "${int}" in
+        0) printf "false\n" ;;
+        1) printf "true\n" ;;
+    esac
+}
+
+get_commit_msg() {
+    local action="$1"
+    local dest="$2"
+    local src="$3"
+    local version
+
+    case "${action}" in
+        add|remove)
+            version=$(version_from_yaml "${dest}")
+            printf "[%s] '%s' %s\n" "${dest}" "${pkgbase}-${version}" "${action}"
+        ;;
+        move)
+            version=$(version_from_yaml "${src}")
+            printf "[%s] -> [%s] '%s' %s\n" "${src}" "${dest}" "${pkgbase}-${version}" "${action}"
+        ;;
+    esac
+}
+
+create_repo_db() {
+    [[ -d .artixlinux ]] || mkdir .artixlinux
+
+    yq -n '"---"' > "${REPO_DB}"
+
+    yq -P 'with(
+        .pkgbase;
+            .name = null |
+            .version = null |
+            .arch = [] |
+            .pkgname = [] )' \
+        -i "${REPO_DB}"
+
+    yq -P 'with(
+        .actions;
+            .addRepo = null |
+            .removeRepo = null |
+            .triggersBuild = false |
+            .triggersRebuild = false |
+            .triggersRepoAdd = false |
+            .triggersRepoRemove = false |
+            .triggersNoCheck = false )' \
+        -i "${REPO_DB}"
+
+    yq -P '.repos = {}' -i "${REPO_DB}"
+
+    for r in "${ARTIX_DB[@]}"; do
+        local repo
+        repo=".repos.${r}" \
+            yq -P 'with(
+                    eval(strenv(repo));
+                        .version = null |
+                        .packages = [] )' \
+                -i "${REPO_DB}"
+    done
+}
+
+update_yaml_base() {
+    local version
+    local name
+    local pkgnames
+    local arches
+
+    name="${pkgbase:-${pkgname}}"
+    version="$(get_full_version)"
+    pkgnames=$(yaml_array "${pkgname[@]}")
+    arches=$(yaml_array "${arch[@]}")
+
+    name="${name}" version="${version}" pkgnames="${pkgnames}" arches="${arches}" \
+        yq -P 'with(
+            .pkgbase;
+                .name = env(name) |
+                .version = env(version) |
+                .arch = env(arches) |
+                .pkgname = env(pkgnames) )' \
+            -i "${REPO_DB}"
+}
+
+update_yaml_add() {
+    local rebuild="$1"
+    local add="$2"
+    local nocheck="$3"
+    local dest="$4"
+
+    local build=true
+
+    rebuild=$(to_bool "${rebuild}")
+    if ${rebuild}; then
+        rebuild=true
+        build=false
+    fi
+
+    add=$(to_bool "${add}")
+    if ${add}; then
+        local repo
+        local pkgs
+        local version
+        local pkgfiles
+
+        mapfile -t pkgfiles < <(print_package_names)
+
+        pkgs=$(yaml_array "${pkgfiles[@]}")
+
+        version=$(get_full_version)
+        repo=".repos.${dest}"
+
+        version="${version}" pkgs="${pkgs}" repo="${repo}" \
+            yq -P 'with(
+                    eval(strenv(repo));
+                        .version = env(version) |
+                        .packages = env(pkgs) )' \
+                -i "${REPO_DB}"
+    fi
+
+    nocheck=$(to_bool "${nocheck}")
+
+    nocheck="${nocheck}" add="${add}" \
+    rebuild="${rebuild}" build="${build}" dest="${dest}" \
+        yq -P 'with(
+            .actions;
+                .addRepo = env(dest) |
+                .removeRepo = null |
+                .triggersBuild = env(build) |
+                .triggersRebuild = env(rebuild) |
+                .triggersRepoAdd = env(add) |
+                .triggersRepoRemove = false |
+                .triggersNoCheck = env(nocheck) )' \
+            -i "${REPO_DB}"
+}
+
+update_yaml_remove() {
+    local dest="$1"
+
+    local repo
+    repo=".repos.${dest}"
+
+    repo="${repo}" \
+        yq -P 'with(
+                eval(strenv(repo));
+                    .version = null |
+                    .packages = [] )' \
+            -i "${REPO_DB}"
+
+    dest="${dest}" \
+        yq -P 'with(
+            .actions;
+                .addRepo = null |
+                .removeRepo = env(dest) |
+                .triggersBuild = false |
+                .triggersRebuild = false |
+                .triggersRepoAdd = false |
+                .triggersRepoRemove = true |
+                .triggersNoCheck = false )' \
+            -i "${REPO_DB}"
+}
+
+update_yaml_move() {
+    local src="$1"
+    local dest="$2"
+    local pkgs
+    local version
+    local src_repo
+    local dest_repo
+
+    src_repo=".repos.${src}"
+    dest_repo=".repos.${dest}"
+
+    version=$(version_from_yaml "${src}")
+    pkgs=$(packages_from_yaml "${src}")
+
+    src_repo="${src_repo}" \
+        yq -P 'with(
+                eval(strenv(src_repo));
+                    .version = null |
+                    .packages = [] )' \
+            -i "${REPO_DB}"
+
+    version="${version}" pkgs="${pkgs}" dest_repo="${dest_repo}" \
+        yq -P 'with(
+                eval(strenv(dest_repo));
+                    .version = env(version) |
+                    .packages = env(pkgs) )' \
+            -i "${REPO_DB}"
+
+    src=${src} dest="${dest}" \
+        yq -P 'with(
+            .actions;
+                .addRepo = env(dest) |
+                .removeRepo = env(src) |
+                .triggersBuild = false |
+                .triggersRebuild = false |
+                .triggersRepoAdd = true |
+                .triggersRepoRemove = true |
+                .triggersNoCheck = false )' \
+            -i "${REPO_DB}"
+}
+
+show_db() {
+    if ! yq -r ${REPO_DB} 1>/dev/null 2>/dev/null; then
+        die "${REPO_DB} invalid!"
+    fi
+    yq -rP '. | .repos |= with_entries(select(.value.version))' "${REPO_DB}"
+    return 0
+}
+
+show_srcinfo_base() {
+    pkg2yaml . | yq '.pkgbase'
+}
+
+show_srcinfo_pkgs() {
+    pkg2yaml . | yq '.pkgnames'
+}

src/lib/pkg/db/migrate.sh

@@ -0,0 +1,95 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+declare -rA REPO_MAP=(
+    [core-rebuild]=system-goblins
+    [core-staging]=system-goblins
+    [core-testing]=system-gremlins
+    [core]=system
+    [extra-rebuild]=world-goblins
+    [extra-staging]=world-goblins
+    [extra-testing]=world-gremlins
+    [extra]=world
+    [multilib-staging]=lib32-goblins
+    [multilib-testing]=lib32-gremlins
+    [multilib]=lib32
+    [community-staging]=galaxy-goblins
+    [community-testing]=galaxy-gremlins
+    [community]=galaxy
+)
+
+update_gitignore() {
+    {
+    printf '*.service\n'
+    printf '*.timer\n'
+    printf '*.socket\n'
+    } >> .gitignore
+}
+
+migrate_to_yaml() {
+    if [[ -f trunk/PKGBUILD ]]; then
+        cp -r trunk/* ./
+        stat_busy "Migrating ${pkgbase} to new layout"
+        create_repo_db
+        stat_done
+        # shellcheck source=contrib/makepkg/PKGBUILD.proto
+        source "trunk/PKGBUILD"
+        update_yaml_base
+
+        if [[ -d x86_64 ]]; then
+            local repos
+            mapfile -t repos < <(ls x86_64)
+            for r in "${repos[@]}"; do
+                # shellcheck source=contrib/makepkg/PKGBUILD.proto
+                source "x86_64/${r}/PKGBUILD"
+
+                local repo
+                local pkgs
+                local version
+                local pkgfiles
+
+                mapfile -t pkgfiles < <(print_package_names)
+
+                pkgs=$(yaml_array "${pkgfiles[@]}")
+
+                version=$(get_full_version)
+
+                repo=".repos.${REPO_MAP[$r]}"
+
+                version="${version}" pkgs="${pkgs}" repo="${repo}" \
+                    yq -P 'with(
+                            eval(strenv(repo));
+                                .version = env(version) |
+                                .packages = env(pkgs) )' \
+                        -i "${REPO_DB}"
+
+                if [[ -n ${GIT_TOKEN} ]]; then
+                    local topic gitname
+                    gitname=$(get_compliant_name "${pkgbase}")
+
+                    topic="${REPO_MAP[$r]}"
+                    if ! add_topic "${gitname}" "${topic}"; then
+                        warning "failed to set topic: ${topic}"
+                    fi
+
+                    topic="${r}"
+                    if ! remove_topic "${gitname}" "${topic}"; then
+                        warning "failed to remove topic: ${topic}"
+                    fi
+                fi
+
+            done
+            git rm -r x86_64
+        fi
+        git rm -r trunk
+        if [[ -f .artixlinux/agent.yaml ]]; then
+            git rm .artixlinux/agent.yaml
+        fi
+        if [[ -f .gitignore ]]; then
+            update_gitignore
+        fi
+        git add .
+        git commit -m "migrate to new layout"
+    fi
+}

src/lib/pkg/deploy.sh

@@ -0,0 +1,43 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ functions
+
+shopt -s extglob
+
+find_cached_pkgfile() {
+    local searchdirs=("$PKGDEST" "$PWD") results=()
+    local pkg="$1"
+    for dir in "${searchdirs[@]}"; do
+        [[ -d "$dir" ]] || continue
+        [[ -e "$dir/$pkg" ]] && results+=("$dir/$pkg")
+    done
+    case ${#results[*]} in
+        0)
+            return 1
+        ;;
+        1)
+            printf '%s\n' "${results[0]}"
+            return 0
+        ;;
+        *)
+            error 'Multiple packages found:'
+            printf '\t%s\n' "${results[@]}" >&2
+            return 1
+        ;;
+    esac
+}
+
+shopt -u extglob
+
+get_pkgbasename() {
+    local name="$1"
+    local rm_pkg=${name%.pkg.tar*}
+    rm_pkg=${rm_pkg%-*}
+    rm_pkg=${rm_pkg%-*}
+    rm_pkg=${rm_pkg%-*}
+    printf "%s\n" "$rm_pkg"
+}
+
+#}}}

src/lib/pkg/diff.sh

@@ -0,0 +1,77 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+#{{{ functions
+
+pkgver_equal() {
+    if [[ $1 = *-* && $2 = *-* ]]; then
+        # if both versions have a pkgrel, then they must be an exact match
+        [[ $1 = "$2" ]]
+    else
+        # otherwise, trim any pkgrel and compare the bare version.
+        [[ ${1%%-*} = "${2%%-*}" ]]
+    fi
+}
+
+shopt -s extglob
+
+find_cached_package() {
+    local searchdirs=("$PWD" "$PKGDEST") results=()
+    local targetname=$1 targetver=$2 targetarch=$3
+    local dir pkg packages pkgbasename name ver rel arch r results
+
+    for dir in "${searchdirs[@]}"; do
+        [[ -d $dir ]] || continue
+
+        shopt -s extglob nullglob
+        mapfile -t packages < <(printf "%s\n" "$dir"/"${targetname}"-"${targetver}"-*"${targetarch}".pkg.tar?(.!(sig|*.*)))
+        shopt -u extglob nullglob
+
+        for pkg in "${packages[@]}"; do
+            [[ -f $pkg ]] || continue
+
+            # avoid adding duplicates of the same inode
+            for r in "${results[@]}"; do
+                [[ $r -ef $pkg ]] && continue 2
+            done
+
+            # split apart package filename into parts
+            pkgbasename=${pkg##*/}
+            pkgbasename=${pkgbasename%.pkg.tar*}
+
+            arch=${pkgbasename##*-}
+            pkgbasename=${pkgbasename%-"$arch"}
+
+            rel=${pkgbasename##*-}
+            pkgbasename=${pkgbasename%-"$rel"}
+
+            ver=${pkgbasename##*-}
+            name=${pkgbasename%-"$ver"}
+
+            if [[ $targetname = "$name" && $targetarch = "$arch" ]] &&
+                pkgver_equal "$targetver" "$ver-$rel"; then
+                results+=("$pkg")
+            fi
+        done
+    done
+
+    case ${#results[*]} in
+        0)
+            return 1
+        ;;
+        1)
+            printf '%s\n' "${results[0]}"
+            return 0
+        ;;
+        *)
+            error 'Multiple packages found:'
+            printf '\t%s\n' "${results[@]}" >&2
+            return 1
+        ;;
+    esac
+}
+
+shopt -u extglob
+
+#}}}

src/lib/pkg/git.sh

@@ -0,0 +1,85 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${ARTOOLS_INCLUDE_GIT_SH:-} ]] || return 0
+ARTOOLS_INCLUDE_GIT_SH=1
+
+set -e
+
+artixpkg_git_usage() {
+    local -r COMMAND=${_ARTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+    cat <<- _EOF_
+    Usage: ${COMMAND} [COMMAND] [OPTIONS]
+
+    COMMANDS
+        clone          Clone a package repository
+        config         Configure a clone according to artix specs
+        create         Create a new Gitea package repository
+
+    OPTIONS
+        -h, --help     Show this help text
+
+    EXAMPLES
+        $ ${COMMAND} clone libfoo linux libbar
+        $ ${COMMAND} clone --maintainer maintainer-mynickname
+        $ ${COMMAND} config -t libfoo
+        $ ${COMMAND} config -u libfoo
+        $ ${COMMAND} create libfoo
+_EOF_
+}
+
+artixpkg_git() {
+    if (( $# < 1 )); then
+        artixpkg_git_usage
+        exit 0
+    fi
+
+    # option checking
+    while (( $# )); do
+        case $1 in
+        -h|--help)
+            artixpkg_git_usage
+            exit 0
+        ;;
+        clone)
+            _ARTOOLS_COMMAND+=" $1"
+            shift
+            # shellcheck source=src/lib/pkg/git/clone.sh
+            source "${LIBDIR}"/pkg/git/clone.sh
+            artixpkg_git_clone "$@"
+            exit 0
+        ;;
+        config)
+            _ARTOOLS_COMMAND+=" $1"
+            shift
+            # shellcheck source=src/lib/pkg/git/config.sh
+            source "${LIBDIR}"/pkg/git/config.sh
+            artixpkg_git_config "$@"
+            exit 0
+        ;;
+        create)
+            _ARTOOLS_COMMAND+=" $1"
+            shift
+            # shellcheck source=src/lib/pkg/git/create.sh
+            source "${LIBDIR}"/pkg/git/create.sh
+            artixpkg_git_create "$@"
+            exit 0
+        ;;
+        pull)
+            _ARTOOLS_COMMAND+=" $1"
+            shift
+            # shellcheck source=src/lib/pkg/git/pull.sh
+            source "${LIBDIR}"/pkg/git/pull.sh
+            artixpkg_git_pull "$@"
+            exit 0
+        ;;
+        -*)
+            die "invalid argument: %s" "$1"
+        ;;
+        *)
+            die "invalid command: %s" "$1"
+        ;;
+        esac
+    done
+}

src/lib/pkg/git/clone.sh

@@ -0,0 +1,166 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${ARTOOLS_INCLUDE_GIT_CLONE_SH:-} ]] || return 0
+ARTOOLS_INCLUDE_GIT_CLONE_SH=1
+
+# shellcheck source=src/lib/pkg/git/config.sh
+source "${LIBDIR}"/pkg/git/config.sh
+
+set -e
+
+
+artixpkg_git_clone_usage() {
+    local -r COMMAND=${_ARTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+    cat <<- _EOF_
+    Usage: ${COMMAND} [OPTIONS] [PKGBASE]...
+
+    OPTIONS
+        -m, --maintainer=NAME  Clone all packages of the named maintainer
+        --protocol https       Clone the repository over https
+        -t, --topic=NAME       Clone all packages of the named topic
+        -j, --jobs N           Run up to N jobs in parallel (default: $(nproc))
+        --universe             Clone all existing packages, useful for cache warming
+        -h, --help             Show this help text
+
+    EXAMPLES
+        $ ${COMMAND} libfoo linux libbar
+        $ ${COMMAND} --maintainer maintainer-mynickname
+        $ ${COMMAND} --topic myopic
+        $ ${COMMAND} -j 8 --topic myopic
+_EOF_
+}
+
+
+
+artixpkg_git_clone() {
+    if (( $# < 1 )); then
+        artixpkg_git_clone_usage
+        exit 0
+    fi
+
+    # options
+    local GIT_REPO_BASE_URL="${GIT_SSH}:"
+    local CLONE_ALL=0
+    local MAINTAINER=
+    local TOPIC=
+    local CONFIGURE_OPTIONS=()
+    local jobs=
+    jobs=$(nproc)
+
+    local command=${_ARTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+
+    while (( $# )); do
+        case $1 in
+            -h|--help)
+                artixpkg_git_clone_usage
+                exit 0
+            ;;
+            --protocol=https)
+                GIT_REPO_BASE_URL="${GIT_HTTPS}/"
+                CONFIGURE_OPTIONS+=("$1")
+                shift
+            ;;
+            --protocol)
+                (( $# <= 1 )) && die "missing argument for %s" "$1"
+                if [[ $2 == https ]]; then
+                    GIT_REPO_BASE_URL="${GIT_HTTPS}/"
+                else
+                    die "unsupported protocol: %s" "$2"
+                fi
+                CONFIGURE_OPTIONS+=("$1" "$2")
+                shift 2
+            ;;
+            -m|--maintainer)
+                (( $# <= 1 )) && die "missing argument for %s" "$1"
+                MAINTAINER="$2"
+                shift 2
+            ;;
+            --maintainer=*)
+                MAINTAINER="${1#*=}"
+                shift
+            ;;
+            -t|--topic)
+                (( $# <= 1 )) && die "missing argument for %s" "$1"
+                TOPIC="$2"
+                shift 2
+            ;;
+            --topic=*)
+                TOPIC="${1#*=}"
+                shift
+            ;;
+            --universe)
+                CLONE_ALL=1
+                shift
+            ;;
+            -j|--jobs)
+                (( $# <= 1 )) && die "missing argument for %s" "$1"
+                jobs=$2
+                shift 2
+            ;;
+            --)
+                shift
+                break
+            ;;
+            -*)
+                die "invalid argument: %s" "$1"
+            ;;
+            *)
+                pkgbases=("$@")
+                break
+            ;;
+        esac
+    done
+
+    # Query packages of a maintainer
+    if [[ -n ${MAINTAINER} ]]; then
+        stat_busy "Query mantainer packages"
+            local maint
+            maint="maintainer-${MAINTAINER}"
+            mapfile -t pkgbases < <(search_topic "${maint}" | yq -P -r '.data | .[].name' | sort)
+        stat_done
+    fi
+
+    if [[ -n ${TOPIC} ]]; then
+        stat_busy "Query topic packages"
+            mapfile -t pkgbases < <(search_topic "${TOPIC}" | yq -P -r '.data | .[].name' | sort)
+        stat_done
+    fi
+
+    # Query all released packages
+    if (( CLONE_ALL )); then
+        stat_busy "Query all packages"
+            mapfile -t pkgbases < <(list_all_repos | yq -P -r '.[] | .name' | sort)
+        stat_done
+    fi
+
+    # parallelization
+    if [[ ${jobs} != 1 ]] && (( ${#pkgbases[@]} > 1 )); then
+        # force colors in parallel if parent process is colorized
+        if [[ -n ${BOLD} ]]; then
+            export ARTOOLS_COLOR=always
+        fi
+        if ! parallel --bar --jobs "${jobs}" "${command}" ::: "${pkgbases[@]}"; then
+            die 'Failed to clone some packages, please check the output'
+            exit 1
+        fi
+        exit 0
+    fi
+
+    for pkgbase in "${pkgbases[@]}"; do
+        if [[ ! -d ${pkgbase} ]]; then
+            msg "Cloning ${pkgbase} ..."
+            local gitname url
+            gitname=$(get_compliant_name "${pkgbase}")
+            url="${GIT_REPO_BASE_URL}${GIT_ORG}/${gitname}.git"
+            if ! git clone "${url}" "${pkgbase}"; then
+                die 'failed to clone %s' "${pkgbase}"
+            fi
+        else
+            warning "Skip cloning ${pkgbase}: Directory exists"
+        fi
+
+        artixpkg_git_config "${CONFIGURE_OPTIONS[@]}" "${pkgbase}"
+    done
+}

src/lib/pkg/git/config.sh

@@ -0,0 +1,294 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${ARTOOLS_INCLUDE_GIT_CONFIG_SH:-} ]] || return 0
+ARTOOLS_INCLUDE_GIT_CONFIG_SH=1
+
+# shellcheck source=src/lib/pkg/db/db.sh
+source "${LIBDIR}"/pkg/db/db.sh
+# shellcheck source=src/lib/pkg/db/migrate.sh
+source "${LIBDIR}"/pkg/db/migrate.sh
+
+set -e
+
+
+commit_ci(){
+    local ci=Jenkinsfile
+
+    printf "@Library('artix-ci') import org.artixlinux.RepoPackage\n" > "${ci}"
+    {
+    printf '\n'
+    printf 'PackagePipeline(new RepoPackage(this))\n'
+    } >> "${ci}"
+
+    git add "${ci}"
+    git commit -m "initial ci commit"
+}
+
+artixpkg_git_config_usage() {
+    local -r COMMAND=${_ARTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+    cat <<- _EOF_
+    Usage: ${COMMAND} [OPTIONS] [PKGBASE]...
+
+    OPTIONS
+        -t, --topic        Set the maintainer topic via gitea api
+        -u, --upstream     Add upstream arch remote
+        --protocol https     Configure remote url to use https
+        -j, --jobs N       Run up to N jobs in parallel (default: $(nproc))
+        -h, --help         Show this help text
+
+    EXAMPLES
+        $ ${COMMAND} -t libfoo
+        $ ${COMMAND} -u libfoo
+        $ ${COMMAND} *
+_EOF_
+}
+
+get_packager_name() {
+    local packager=$1
+    local packager_pattern="(.+) <(.+@.+)>"
+    local name
+
+    if [[ ! $packager =~ $packager_pattern ]]; then
+        return 1
+    fi
+
+    name=$(echo "${packager}"|sed -E "s/${packager_pattern}/\1/")
+    printf "%s" "${name}"
+}
+
+get_packager_email() {
+    local packager=$1
+    local packager_pattern="(.+) <(.+@.+)>"
+    local email
+
+    if [[ ! $packager =~ $packager_pattern ]]; then
+        return 1
+    fi
+
+    email=$(echo "${packager}"|sed -E "s/${packager_pattern}/\2/")
+    printf "%s" "${email}"
+}
+
+is_packager_name_valid() {
+    local packager_name=$1
+    if [[ -z ${packager_name} ]]; then
+        return 1
+    elif [[ ${packager_name} == "John Tux" ]]; then
+        return 1
+    elif [[ ${packager_name} == "Unknown Packager" ]]; then
+        return 1
+    fi
+    return 0
+}
+
+is_packager_email_official() {
+    local packager_email=$1
+    if [[ -z ${packager_email} ]]; then
+        return 1
+    elif [[ $packager_email =~ .+@artixlinux.org ]]; then
+        return 0
+    fi
+    return 1
+}
+
+artixpkg_git_config() {
+    # options
+    local GIT_REPO_BASE_URL=${GIT_HTTPS}
+    local official=0
+    local proto=https
+    local proto_force=0
+    local jobs=
+    jobs=$(nproc)
+    local paths=()
+
+    local SET_TOPIC=0
+    local UPSTREAM=0
+
+    # variables
+    local -r command=${_ARTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+    local path realpath pkgbase
+    local PACKAGER GPGKEY packager_name packager_email
+
+    while (( $# )); do
+        case $1 in
+        -h|--help)
+            artixpkg_git_config_usage
+            exit 0
+        ;;
+        -t|--topic)
+            SET_TOPIC=1
+            shift
+        ;;
+        -u|--upstream)
+            UPSTREAM=1
+            shift
+        ;;
+        --protocol=https)
+            proto_force=1
+            shift
+        ;;
+        --protocol)
+            (( $# <= 1 )) && die "missing argument for %s" "$1"
+            if [[ $2 == https ]]; then
+                proto_force=1
+            else
+                die "unsupported protocol: %s" "$2"
+            fi
+            shift 2
+        ;;
+        -j|--jobs)
+            (( $# <= 1 )) && die "missing argument for %s" "$1"
+            jobs=$2
+            shift 2
+        ;;
+        --)
+            shift
+            break
+        ;;
+        -*)
+            die "invalid argument: %s" "$1"
+        ;;
+        *)
+            paths=("$@")
+            break
+        ;;
+        esac
+    done
+
+    # check if invoked without any path from within a packaging repo
+    if (( ${#paths[@]} == 0 )); then
+        if [[ -f PKGBUILD ]]; then
+            paths=(".")
+        else
+            artixpkg_git_config_usage
+            exit 1
+        fi
+    fi
+
+    # Load makepkg.conf variables to be available for packager identity
+    msg "Collecting packager identity from makepkg.conf"
+    # shellcheck disable=2119
+    load_makepkg_config
+    if [[ -n ${PACKAGER} ]]; then
+        if ! packager_name=$(get_packager_name "${PACKAGER}") || \
+            ! packager_email=$(get_packager_email "${PACKAGER}"); then
+            die "invalid PACKAGER format '${PACKAGER}' in makepkg.conf"
+        fi
+        if ! is_packager_name_valid "${packager_name}"; then
+            die "invalid PACKAGER '${PACKAGER}' in makepkg.conf"
+        fi
+        if is_packager_email_official "${packager_email}"; then
+            official=1
+            if (( ! proto_force )); then
+                proto=ssh
+                GIT_REPO_BASE_URL="${GIT_SSH}/"
+            fi
+        fi
+    fi
+
+    msg2 "name    : ${packager_name:-${YELLOW}undefined${ALL_OFF}}"
+    msg2 "email   : ${packager_email:-${YELLOW}undefined${ALL_OFF}}"
+    msg2 "gpg-key : ${GPGKEY:-${YELLOW}undefined${ALL_OFF}}"
+    if [[ ${proto} == ssh ]]; then
+        msg2 "protocol: ${GREEN}${proto}${ALL_OFF}"
+    else
+        msg2 "protocol: ${YELLOW}${proto}${ALL_OFF}"
+    fi
+
+    # parallelization
+    if [[ ${jobs} != 1 ]] && (( ${#paths[@]} > 1 )); then
+        if [[ -n ${BOLD} ]]; then
+            export ARTOOLS_COLOR=always
+        fi
+        if ! parallel --bar --jobs "${jobs}" "${command}" ::: "${paths[@]}"; then
+            die 'Failed to configure some packages, please check the output'
+            exit 1
+        fi
+        exit 0
+    fi
+
+    for path in "${paths[@]}"; do
+        if ! realpath=$(realpath -e "${path}"); then
+            error "No such directory: ${path}"
+            continue
+        fi
+
+        pkgbase=$(basename "${realpath}")
+        pkgbase=${pkgbase%.git}
+        msg "Configuring ${pkgbase}"
+
+        if [[ ! -d "${path}/.git" ]]; then
+            error "Not a Git repository: ${path}"
+            continue
+        fi
+        ( cd "${path}" || return
+            git config pull.rebase true
+            git config branch.autoSetupRebase always
+
+
+            # setup author identity
+            if [[ -n ${packager_name} ]]; then
+                git config user.name "${packager_name}"
+                git config user.email "${packager_email}"
+            fi
+
+            # force gpg for official packagers
+            if (( official )); then
+                git config commit.gpgsign true
+            fi
+
+            # set custom pgp key from makepkg.conf
+            if [[ -n $GPGKEY ]]; then
+                git config commit.gpgsign true
+                git config user.signingKey "${GPGKEY}"
+            fi
+
+            # topics meta
+            if (( SET_TOPIC )); then
+                if [[ -n ${GIT_TOKEN} ]]; then
+                    local topic gitname
+                    topic="maintainer-${packager_name}"
+                    gitname=$(get_compliant_name "${pkgbase}")
+                    if ! add_topic "${gitname}" "${topic}"; then
+                        warning "failed to set the maintainer topic: ${topic}"
+                    fi
+                fi
+            fi
+            if (( UPSTREAM )); then
+                local remote_url
+                remote_url="${GIT_UPSTREAM_URL}/${pkgbase}".git
+                if ! git remote add upstream "${remote_url}"; then
+                    warning "failed to set the upstream: ${remote_url}"
+                fi
+            fi
+
+            migrate_to_yaml
+
+            if [[ ! -f Jenkinsfile ]]; then
+                msg "Adding ci support ..."
+                commit_ci
+            fi
+
+            if [[ ! -f ${REPO_DB} ]]; then
+
+                msg "Creating repo db ..."
+                create_repo_db
+
+                if [[ -f PKGBUILD ]]; then
+                    # shellcheck source=contrib/makepkg/PKGBUILD.proto
+                    source PKGBUILD
+                    update_yaml_base
+                fi
+                git add "${REPO_DB}"
+                git commit -m "Create repo db"
+            fi
+
+            msg "Querying ${pkgbase} ..."
+            if ! show_db; then
+                warning "Could not query ${REPO_DB}"
+            fi
+        )
+    done
+}