braid (#63)

* use braid instead of git-subrepo

Reviewed-on: artix/artools#63

Makefile

@@ -1,14 +1,10 @@
-VERSION=0.18
-
-CHROOT_VERSION=0.10
+V=0.28
 
 TOOLS = artools
 PREFIX ?= /usr
 SYSCONFDIR = /etc
 BINDIR = $(PREFIX)/bin
-LIBDIR = $(PREFIX)/lib
 DATADIR = $(PREFIX)/share
-CPIODIR = $(SYSCONFDIR)/initcpio
 
 BASE_CONF = \
 	data/conf/artools-base.conf
@@ -17,20 +13,17 @@ BASE_BIN = \
 	bin/base/chroot-run \
 	bin/base/mkchroot \
 	bin/base/basestrap \
-	bin/base/artools-chroot \
+	bin/base/artix-chroot \
 	bin/base/fstabgen
 
-BASE_LIBS = \
-	$(wildcard lib/base/*.sh)
-
-BASE_UTIL = lib/util-base.sh
-
 BASE_DATA = \
 	$(wildcard data/pacman/pacman*.conf)
 
 PKG_CONF = \
 	data/conf/artools-pkg.conf
 
+SETARCH_ALIASES = \
+
 PKG_BIN = \
 	bin/pkg/buildpkg \
 	bin/pkg/deploypkg \
@@ -45,7 +38,11 @@ PKG_BIN = \
 	bin/pkg/finddeps \
 	bin/pkg/find-libdeps \
 	bin/pkg/batchpkg \
-	bin/pkg/signpkg
+	bin/pkg/signpkg \
+	bin/pkg/checkrepo \
+	bin/pkg/gitearepo \
+	bin/pkg/tidyarch \
+	bin/pkg/mkdepgraph
 
 LN_COMMITPKG = \
 	extrapkg \
@@ -59,7 +56,8 @@ LN_COMMITPKG = \
 	multilib-testingpkg \
 	multilib-stagingpkg \
 	kde-unstablepkg \
-	gnome-unstablepkg
+	gnome-unstablepkg \
+	rebuildpkg
 
 LN_BUILDPKG = \
 	buildpkg-system \
@@ -75,27 +73,9 @@ LN_BUILDPKG = \
 	buildpkg-kde-wobble \
 	buildpkg-gnome-wobble
 
-LN_DEPLOYPKG = \
-	deploypkg-system \
-	deploypkg-world \
-	deploypkg-gremlins \
-	deploypkg-goblins \
-	deploypkg-galaxy \
-	deploypkg-galaxy-gremlins \
-	deploypkg-galaxy-goblins \
-	deploypkg-lib32 \
-	deploypkg-lib32-gremlins \
-	deploypkg-lib32-goblins \
-	deploypkg-kde-wobble \
-	deploypkg-gnome-wobble
-
-PKG_LIBS = \
-	$(wildcard lib/pkg/*.sh)
-
-PKG_UTIL = lib/util-pkg.sh
-
 PKG_DATA = \
-	data/pacman/makepkg.conf
+	data/pacman/makepkg.conf \
+	data/valid-names.conf
 
 PATCHES = \
 	$(wildcard data/patches/*.patch)
@@ -104,55 +84,38 @@ ISO_CONF = \
 	data/conf/artools-iso.conf
 
 ISO_BIN = \
-	bin/iso/buildiso \
-	bin/iso/deployiso
+	bin/iso/buildiso
 
 LN_BUILDISO = \
 	buildiso-gremlins \
 	buildiso-goblins
 
-ISO_LIBS = \
-	$(wildcard lib/iso/*.sh)
-
-ISO_UTIL = lib/util-iso.sh
-
-
 DIRMODE = -dm0755
 FILEMODE = -m0644
 MODE =  -m0755
 LN = ln -sf
 RM = rm -f
-M4 = m4 -P
+M4 = m4 -P --define=m4_artools_pkg_version=$V
 CHMODAW = chmod a-w
 CHMODX = chmod +x
 
 BIN = $(BASE_BIN) $(PKG_BIN) $(ISO_BIN)
-UTIL = $(BASE_UTIL) $(PKG_UTIL) $(ISO_UTIL)
 
-all: $(BIN) $(UTIL)
+all: $(BIN)
 
-EDIT_UTIL = sed -e "s|@datadir[@]|$(DATADIR)|g" \
-	-e "s|@sysconfdir[@]|$(SYSCONFDIR)|g" \
-	-e "s|@libdir[@]|$(LIBDIR)|g" \
-	-e "s|@chroot_version@|$(CHROOT_VERSION)|"
+EDIT = sed -e "s|@datadir[@]|$(DATADIR)|g" \
+	-e "s|@sysconfdir[@]|$(SYSCONFDIR)|g"
 
-EDIT_BIN = sed -e "s|@libdir[@]|$(LIBDIR)|g"
-
-$(UTIL): %: %.in Makefile
+%: %.in Makefile lib/util-base.sh
 	@echo "GEN $@"
 	@$(RM) "$@"
-	@$(M4) $@.in | $(EDIT_UTIL) >$@
-	@$(CHMODAW) "$@"
-
-$(BIN): %: %.in Makefile
-	@echo "GEN $@"
-	@$(RM) "$@"
-	@$(M4) $@.in | $(EDIT_BIN) >$@
+	@{ echo -n 'm4_changequote([[[,]]])'; cat $@.in; } | $(M4) | $(EDIT) >$@
 	@$(CHMODAW) "$@"
 	@$(CHMODX) "$@"
+	@bash -O extglob -n "$@"
 
 clean:
-	$(RM) $(BIN) $(UTIL)
+	$(RM) $(BIN)
 
 install_base:
 	install $(DIRMODE) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
@@ -161,13 +124,12 @@ install_base:
 	install $(DIRMODE) $(DESTDIR)$(BINDIR)
 	install $(MODE) $(BASE_BIN) $(DESTDIR)$(BINDIR)
 
-	install $(DIRMODE) $(DESTDIR)$(LIBDIR)/$(TOOLS)/base
-	install $(FILEMODE) $(BASE_UTIL) $(DESTDIR)$(LIBDIR)/$(TOOLS)
-	install $(FILEMODE) $(BASE_LIBS) $(DESTDIR)$(LIBDIR)/$(TOOLS)/base
-
 	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)
 	install $(FILEMODE) $(BASE_DATA) $(DESTDIR)$(DATADIR)/$(TOOLS)
 
+	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)/setarch-aliases.d
+	for a in ${SETARCH_ALIASES}; do install $(FILEMODE) setarch-aliases.d/$$a $(DESTDIR)$(DATADIR)/$(TOOLS)/setarch-aliases.d; done
+
 install_pkg:
 	install $(DIRMODE) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
 	install $(FILEMODE) $(PKG_CONF) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
@@ -181,11 +143,6 @@ install_pkg:
 
 	for l in $(LN_COMMITPKG); do $(LN) commitpkg $(DESTDIR)$(BINDIR)/$$l; done
 	for l in $(LN_BUILDPKG); do $(LN) buildpkg $(DESTDIR)$(BINDIR)/$$l; done
-	for l in $(LN_DEPLOYPKG); do $(LN) deploypkg $(DESTDIR)$(BINDIR)/$$l; done
-
-	install $(DIRMODE) $(DESTDIR)$(LIBDIR)/$(TOOLS)/pkg
-	install $(FILEMODE) $(PKG_UTIL) $(DESTDIR)$(LIBDIR)/$(TOOLS)
-	install $(FILEMODE) $(PKG_LIBS) $(DESTDIR)$(LIBDIR)/$(TOOLS)/pkg
 
 	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)
 	install $(FILEMODE) $(PKG_DATA) $(DESTDIR)$(DATADIR)/$(TOOLS)
@@ -193,10 +150,7 @@ install_pkg:
 	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)/patches
 	install $(FILEMODE) $(PATCHES) $(DESTDIR)$(DATADIR)/$(TOOLS)/patches
 
-install_cpio:
-	+make CPIODIR=$(CPIODIR) DESTDIR=$(DESTDIR) -C initcpio install
-
-install_iso: install_cpio
+install_iso:
 	install $(DIRMODE) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
 	install $(FILEMODE) $(ISO_CONF) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
 
@@ -205,10 +159,6 @@ install_iso: install_cpio
 
 	for l in $(LN_BUILDISO); do $(LN) buildiso $(DESTDIR)$(BINDIR)/$$l; done
 
-	install $(DIRMODE) $(DESTDIR)$(LIBDIR)/$(TOOLS)/iso
-	install $(FILEMODE) $(ISO_UTIL) $(DESTDIR)$(LIBDIR)/$(TOOLS)
-	install $(FILEMODE) $(ISO_LIBS) $(DESTDIR)$(LIBDIR)/$(TOOLS)/iso
-
 install: install_base install_pkg install_iso
 
 .PHONY: all clean install install_base install_pkg install_iso

README.md

@@ -18,23 +18,18 @@ artools
 ##### Runtime:
 
 - base:
-  * openssh
-  * rsync
-  * haveged
   * os-prober
-  * gnupg
   * pacman
 
 - pkg:
   * namcap
-  * git-subrepo
-  * jq
+  * ruby-braid
+  * rsync
 
 - iso:
   * dosfstools
   * libisoburn
   * squashfs-tools
-  * mkinitcpio
   * grub
 
 #### Configuration

bin/base/artix-chroot.in

@@ -0,0 +1,51 @@
+#!/bin/bash
+#
+# Copyright (C) 2018-19 artoo@artixlinux.org
+# Copyright (C) 2018 Artix Linux Developers
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+shopt -s extglob
+
+m4_include(lib/base/message.sh)
+m4_include(lib/base/chroot.sh)
+m4_include(lib/base/mount.sh)
+
+
+usage() {
+    printf 'usage: %s chroot-dir [command]\n' "${0##*/}"
+    printf '    -h             Print this help message\n'
+    printf '\n'
+    printf "    If 'command' is unspecified, %s will launch /bin/sh.\n" "${0##*/}"
+    printf '\n'
+    printf '\n'
+    exit "$1"
+}
+
+opts=':h'
+
+while getopts ${opts} arg; do
+    case "${arg}" in
+        h|?) usage 0 ;;
+    esac
+done
+shift $(( OPTIND - 1 ))
+
+check_root
+
+chrootdir=$1
+shift
+
+[[ -d ${chrootdir} ]] || die "Can't create chroot on non-directory %s" "${chrootdir}"
+
+chroot_api_mount "${chrootdir}" || die "failed to setup API filesystems in chroot %s" "${chrootdir}"
+chroot_add_resolv_conf "${chrootdir}"
+
+SHELL=/bin/sh unshare --fork --pid chroot "${chrootdir}" "$@"

bin/base/artools-chroot.in

@@ -1,96 +0,0 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-shopt -s extglob
-
-. @libdir@/artools/util-base.sh
-
-select_os(){
-    local os_list=( $(detect) ) count=${#os_list[@]}
-    if [[ ${count} > 1 ]];then
-        msg "Detected systems:"
-        local i=0
-        for os in ${os_list[@]};do
-            local last=${os##*:}
-            case $last in
-                'efi') count=$((count-1)) ;;
-                *) info "$i) $(get_os_name $os)"; i=$((i+1)) ;;
-            esac
-        done
-        i=0
-        msg "Select system to mount [0-%s] : " "$((count-1))"
-        read select
-    else
-        select=0
-    fi
-    local os_str=${os_list[$select]} type
-    type=$os_str
-    root=${os_str%%:*}
-    type=${type##*:}
-    if [[ "${type##*:}" == 'linux' ]];then
-        msg "Mounting (%s) [%s]" "$(get_os_name $os_str)" "$root"
-        mount_os "$1" "$root"
-    else
-        die "You can't mount %s!" "$select"
-    fi
-}
-
-automount=false
-
-usage() {
-    echo "usage: ${0##*/} -a [or] ${0##*/} chroot-dir [command]"
-    echo '    -a             Automount detected linux system'
-    echo '    -h             Print this help message'
-    echo ''
-    echo "    If 'command' is unspecified, ${0##*/} will launch /bin/sh."
-    echo ''
-    echo "    If 'automount' is true, ${0##*/} will launch /bin/bash"
-    echo "    and ${chrootdir}."
-    echo ''
-    echo ''
-    exit $1
-}
-
-orig_argv=("$0" "$@")
-
-opts=':ha'
-
-while getopts ${opts} arg; do
-    case "${arg}" in
-        a) automount=true ;;
-        h|?) usage 0 ;;
-        *) echo "invalid argument ${arg}"; usage 1 ;;
-    esac
-done
-shift $(( OPTIND - 1 ))
-
-check_root
-
-if ${automount};then
-    chrootdir=/mnt
-    run_args=/bin/bash
-
-    select_os "${chrootdir}"
-else
-    chrootdir=$1
-    shift
-    run_args="$@"
-
-    [[ -d ${chrootdir} ]] || die "Can't create chroot on non-directory %s" "${chrootdir}"
-
-    chroot_api_mount "${chrootdir}" || die "failed to setup API filesystems in chroot %s" "${chrootdir}"
-    chroot_add_resolv_conf "${chrootdir}"
-fi
-
-SHELL=/bin/sh unshare --fork --pid chroot "${chrootdir}" ${run_args[*]}

bin/base/basestrap.in

@@ -22,7 +22,11 @@
 
 shopt -s extglob
 
-. @libdir@/artools/util-base.sh
+m4_include(lib/base/message.sh)
+m4_include(lib/base/mount.sh)
+m4_include(lib/base/chroot.sh)
+
+#{{{ functions
 
 copy_mirrorlist(){
     cp -a /etc/pacman.d/mirrorlist "$1/etc/pacman.d/"
@@ -36,11 +40,13 @@ copy_keyring(){
 
 create_min_fs(){
     msg "Creating install root at %s" "$1"
-    mkdir -m 0755 -p $1/var/{cache/pacman/pkg,lib/pacman,log} $1/{dev,run,etc/pacman.d}
-    mkdir -m 1777 -p $1/tmp
-    mkdir -m 0555 -p $1/{sys,proc}
+    mkdir -m 0755 -p "$1"/var/{cache/pacman/pkg,lib/pacman,log} "$1"/{dev,run,etc/pacman.d}
+    mkdir -m 1777 -p "$1"/tmp
+    mkdir -m 0555 -p "$1"/{sys,proc}
 }
 
+#}}}
+
 newroot=/mnt
 
 hostcache=0
@@ -49,24 +55,22 @@ copymirrorlist=1
 pacmode=-Sy
 
 usage() {
-    echo "usage: ${0##*/} [options] root [packages...]"
-    echo " -C <config>      Use an alternate config file for pacman"
-    echo " -c               Use the package cache on the host, rather than the target"
-    echo " -G               Avoid copying the host's pacman keyring to the target"
-    echo " -i               Avoid auto-confirmation of package selections"
-    echo " -M               Avoid copying the host's mirrorlist to the target"
-    echo ' -U               Use pacman -U to install packages'
-    echo " -h               Print this help message"
-    echo ''
-    echo ' basestrap installs packages to the specified new root directory.'
-    echo ' If no packages are given, basestrap defaults to the "base" group.'
-    echo ''
-    echo ''
-    exit $1
+    printf "usage: %s [options] root [packages...]\n" "${0##*/}"
+    printf " -C <config>      Use an alternate config file for pacman\n"
+    printf " -c               Use the package cache on the host, rather than the target\n"
+    printf " -G               Avoid copying the host's pacman keyring to the target\n"
+    printf " -i               Avoid auto-confirmation of package selections\n"
+    printf " -M               Avoid copying the host's mirrorlist to the target\n"
+    printf ' -U               Use pacman -U to install packages\n'
+    printf " -h               Print this help message\n"
+    printf '\n'
+    printf ' basestrap installs packages to the specified new root directory.\n'
+    printf ' If no packages are given, basestrap defaults to the "base" group.\n'
+    printf '\n'
+    printf '\n'
+    exit "$1"
 }
 
-orig_argv=("$0" "$@")
-
 opts=':C:cGiMU'
 
 while getopts ${opts} arg; do
@@ -77,8 +81,7 @@ while getopts ${opts} arg; do
         G) copykeyring=0 ;;
         M) copymirrorlist=0 ;;
         U) pacmode=-U ;;
-        :) echo "invalid argument ${arg}:$OPTARG"; usage 1;;
-        ?) usage 0 ;;
+        h|?) usage 0 ;;
     esac
 done
 shift $(( OPTIND - 1 ))

bin/base/chroot-run.in

@@ -12,9 +12,28 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-chroot_version=0.9
+m4_include(lib/base/message.sh)
+m4_include(lib/base/mount.sh)
+m4_include(lib/base/chroot.sh)
+m4_include(lib/base/chroot-version.sh)
 
-. @libdir@/artools/util-base.sh
+# $1: chroot
+kill_chroot_process(){
+    local prefix="$1" flink pid name
+    for root_dir in /proc/*/root; do
+        flink=$(readlink "$root_dir")
+        if [ "x$flink" != "x" ]; then
+            if [ "x${flink:0:${#prefix}}" = "x$prefix" ]; then
+                # this process is in the chroot...
+                pid=$(basename "$(dirname "$root_dir")")
+                name=$(ps -p "$pid" -o comm=)
+                msg2 "Killing chroot process: %s (%s)" "$name" "$pid"
+                kill -9 "$pid"
+            fi
+        fi
+    done
+    sleep 1
+}
 
 # umask might have been changed in /etc/profile
 # ensure that sane default is set again
@@ -23,26 +42,24 @@ umask 0022
 working_dir=''
 files=()
 
-mount_args=()
+mount_args=("-B:/etc/hosts:/etc/hosts")
 
 usage() {
-    echo "Usage: ${0##*/} [options] working-dir [run arguments]"
-    echo "A wrapper around chroot. Provides support for pacman."
-    echo
-    echo ' options:'
-    echo '    -C <file>     Location of a pacman config file'
-    echo '    -M <file>     Location of a makepkg config file'
-    echo '    -c <dir>      Set pacman cache'
-    echo '    -f <file>     Copy file from the host to the chroot'
-    echo '    -s            Do not run setarch'
-    echo '    -b <list>     Bind mountargs'
-    echo '                  List format [mntarg1:src1:dest1 ... mntargN:srcN:destN]'
-    echo '    -h            This message'
+    printf "Usage: %s [options] working-dir [run arguments]\n" "${0##*/}"
+    printf "A wrapper around chroot. Provides support for pacman.\n"
+    printf '\n'
+    printf ' options:\n'
+    printf '    -C <file>     Location of a pacman config file\n'
+    printf '    -M <file>     Location of a makepkg config file\n'
+    printf '    -c <dir>      Set pacman cache\n'
+    printf '    -f <file>     Copy file from the host to the chroot\n'
+    printf '    -s            Do not run setarch\n'
+    printf '    -b <list>     Bind mountargs\n'
+    printf '                  List format [mntarg1:src1:dest1 ... mntargN:srcN:destN]\n'
+    printf '    -h            This message\n'
     exit 1
 }
 
-orig_argv=("$0" "$@")
-
 opts='hC:M:c:b:f:s'
 
 while getopts ${opts} arg; do
@@ -52,12 +69,11 @@ while getopts ${opts} arg; do
         c) cache_dirs+=("$OPTARG") ;;
         f) files+=("$OPTARG") ;;
         s) nosetarch=1 ;;
-        b) bindmounts=("$OPTARG"); mount_args+=(${bindmounts[@]}) ;;
+        b) bindmounts+=("$OPTARG"); mount_args+=(${bindmounts[@]}) ;;
         h|?) usage ;;
-        *) error "invalid argument '$arg'"; usage ;;
     esac
 done
-shift $(($OPTIND - 1))
+shift $(( OPTIND - 1 ))
 
 (( $# < 1 )) && die 'You must specify a directory.'
 
@@ -68,32 +84,32 @@ shift 1
 
 [[ -z $working_dir ]] && die 'Please specify a working directory.'
 
-pacconf_cmd=$(command -v pacman-conf || command -v pacconf)
-
 if (( ${#cache_dirs[@]} == 0 )); then
-    mapfile -t cache_dirs < <($pacconf_cmd --config "${pac_conf:-$working_dir/etc/pacman.conf}" CacheDir)
+    mapfile -t cache_dirs < <(pacman-conf --config "${pac_conf:-$working_dir/etc/pacman.conf}" CacheDir)
 fi
 
-host_mirrors=($($pacconf_cmd --repo world Server 2> /dev/null | sed -r 's#(.*/)world/os/.*#\1$repo/os/$arch#'))
+# shellcheck disable=2016
+host_mirrors=($(pacman-conf --repo world Server 2> /dev/null | sed -r 's#(.*/)world/os/.*#\1$repo/os/$arch#'))
 
 for host_mirror in "${host_mirrors[@]}"; do
     if [[ $host_mirror == *file://* ]]; then
-        host_mirror=$(echo "$host_mirror" | sed -r 's#file://(/.*)/\$repo/os/\$arch#\1#g')
-        info "host mirror: %s" "$host_mirror"
+        # shellcheck disable=2016
+        host_mirror=$(printf "%s\n" "$host_mirror" | sed -r 's#file://(/.*)/\$repo/os/\$arch#\1#g')
         in_array "$host_mirror" "${cache_dirs[@]}" || cache_dirs+=("$host_mirror")
     fi
 done
 
 while read -r line; do
-    mapfile -t lines < <($pacconf_cmd --config "${pac_conf:-$working_dir/etc/pacman.conf}" \
-        --repo $line Server | sed -r 's#(.*/)[^/]+/os/.+#\1#')
+    # shellcheck disable=2016
+    mapfile -t lines < <(pacman-conf --config "${pac_conf:-$working_dir/etc/pacman.conf}" \
+        --repo "$line" Server | sed -r 's#(.*/)[^/]+/os/.+#\1#')
     for line in "${lines[@]}"; do
         if [[ $line = file://* ]]; then
             line=${line#file://}
             in_array "$line" "${cache_dirs[@]}" || cache_dirs+=("$line")
         fi
     done
-done < <($pacconf_cmd --config "${pac_conf:-$working_dir/etc/pacman.conf}" --repo-list)
+done < <(pacman-conf --config "${pac_conf:-$working_dir/etc/pacman.conf}" --repo-list)
 
 copy_hostconf () {
     unshare --fork --pid gpg --homedir "$working_dir"/etc/pacman.d/gnupg/ --no-permission-warning --quiet --batch --import --import-options import-local-sigs "$(pacman-conf GpgDir)"/pubring.gpg >/dev/null 2>&1
@@ -101,9 +117,9 @@ copy_hostconf () {
 
     printf 'Server = %s\n' "${host_mirrors[@]}" >"$working_dir/etc/pacman.d/mirrorlist"
 
-    [[ -n $pacman_conf ]] && cp $pacman_conf "${working_dir}/etc/pacman.conf"
+    [[ -n $pacman_conf ]] && cp "$pacman_conf" "${working_dir}/etc/pacman.conf"
 
-    [[ -n $makepkg_conf ]] && cp $makepkg_conf "${working_dir}/etc/makepkg.conf"
+    [[ -n $makepkg_conf ]] && cp "$makepkg_conf" "${working_dir}/etc/makepkg.conf"
 
     local file
     for file in "${files[@]}"; do
@@ -114,7 +130,7 @@ copy_hostconf () {
     sed -r "s|^#?\\s*CacheDir.+|CacheDir = ${cache_dirs[*]}|g" -i "${working_dir}/etc/pacman.conf"
 }
 
-mount_args+=("-B:${cache_dirs[0]//:/\\:}:${cache_dirs[0]//:/\\:}" "-B:/etc/hosts:/etc/hosts")
+mount_args+=("-B:${cache_dirs[0]//:/\\:}:${cache_dirs[0]//:/\\:}")
 
 for cache_dir in "${cache_dirs[@]:1}"; do
     mount_args+=("-Br:${cache_dir//:/\\:}:${cache_dir//:/\\:}")
@@ -123,43 +139,39 @@ done
 chroot_extra_mount() {
     chroot_add_resolv_conf "${working_dir}"
 
-    for arg in ${mount_args[@]}; do
-        local flag=${arg%%:*}
-        local dest=${arg##*:}
-        local src=${arg%:*}
+    for arg in "${mount_args[@]}"; do
+        local flag=${arg%%:*} dest=${arg##*:} src=${arg%:*}
         src=${src#*:}
         chroot_mount "${src}" "${working_dir}${dest}" "${flag}"
     done
 }
 
-sync_host_localtime(){
-    if [[ -e /etc/localtime ]]; then
-        cp -L /etc/localtime "${working_dir}"/etc/localtime
-    fi
-}
-
 umask 0022
 
 # Sanity check
 if [[ ! -f "$working_dir/.artools" ]]; then
     die "'%s' does not appear to be an artix chroot." "$working_dir"
-elif [[ $(cat "$working_dir/.artools") != ${CHROOTVERSION} ]]; then
+elif [[ $(cat "$working_dir/.artools") != "${CHROOTVERSION}" ]]; then
     die "chroot '%s' is not at version %s. Please rebuild." "$working_dir" "${CHROOTVERSION}"
 fi
 
-#sync_host_localtime
-
 chroot_api_mount "${working_dir}" || die "failed to setup API filesystems in chroot %s" "${working_dir}"
 
 chroot_extra_mount
 
 copy_hostconf
 
-eval $(grep '^CARCH=' "$working_dir/etc/makepkg.conf")
+eval "$(grep '^CARCH=' "$working_dir/etc/makepkg.conf")"
 
 [[ -z $nosetarch ]] || unset CARCH
 
-${CARCH:+setarch "$CARCH"} chroot "${working_dir}" "$@"
+if [[ -f "@datadir@/artools/setarch-aliases.d/${CARCH}" ]]; then
+	read -r set_arch < "@datadir@/artools/setarch-aliases.d/${CARCH}"
+else
+	set_arch="${CARCH}"
+fi
+
+${CARCH:+setarch "${set_arch}"} chroot "${working_dir}" "$@"
 
 ret=$?
 

bin/base/fstabgen.in

@@ -14,10 +14,214 @@
 
 shopt -s extglob
 
-. @libdir@/artools/util-base.sh
+m4_include(lib/base/message.sh)
+
+#{{{ filesystems
+
+declare -A pseudofs_types=([anon_inodefs]=1
+                        [autofs]=1
+                        [bdev]=1
+                        [bpf]=1
+                        [binfmt_misc]=1
+                        [cgroup]=1
+                        [cgroup2]=1
+                        [configfs]=1
+                        [cpuset]=1
+                        [debugfs]=1
+                        [devfs]=1
+                        [devpts]=1
+                        [devtmpfs]=1
+                        [dlmfs]=1
+                        [efivarfs]=1
+                        [fuse.gvfs-fuse-daemon]=1
+                        [fusectl]=1
+                        [hugetlbfs]=1
+                        [mqueue]=1
+                        [nfsd]=1
+                        [none]=1
+                        [pipefs]=1
+                        [proc]=1
+                        [pstore]=1
+                        [ramfs]=1
+                        [rootfs]=1
+                        [rpc_pipefs]=1
+                        [securityfs]=1
+                        [sockfs]=1
+                        [spufs]=1
+                        [sysfs]=1
+                        [tmpfs]=1)
+
+declare -A fsck_types=([cramfs]=1
+                    [exfat]=1
+                    [ext2]=1
+                    [ext3]=1
+                    [ext4]=1
+                    [ext4dev]=1
+                    [jfs]=1
+                    [minix]=1
+                    [msdos]=1
+                    [reiserfs]=1
+                    [vfat]=1
+                    [xfs]=1)
+
+#}}}
+
+#{{{ functions
+
+fstype_is_pseudofs() {
+    (( pseudofs_types["$1"] ))
+}
+
+fstype_has_fsck() {
+    (( fsck_types["$1"] ))
+}
+
+valid_number_of_base() {
+    local base=$1 len=${#2} i
+
+    for (( i = 0; i < len; i++ )); do
+        { _=$(( $base#${2:i:1} )) || return 1; } 2>/dev/null
+    done
+
+    return 0
+}
+
+mangle() {
+    local i chr out
+
+    local {a..f}= {A..F}=
+
+    for (( i = 0; i < ${#1}; i++ )); do
+        chr=${1:i:1}
+        case $chr in
+            [[:space:]\\])
+                printf -v chr '%03o' "'$chr"
+                out+=\\
+            ;;
+        esac
+        out+=$chr
+    done
+
+    printf '%s' "$out"
+}
+
+unmangle() {
+    local i chr out len=$(( ${#1} - 4 ))
+
+    local {a..f}= {A..F}=
+
+    for (( i = 0; i < len; i++ )); do
+        chr=${1:i:1}
+        case $chr in
+            \\)
+                if valid_number_of_base 8 "${1:i+1:3}" ||
+                    valid_number_of_base 16 "${1:i+1:3}"; then
+                    printf -v chr '%b' "${1:i:4}"
+                    (( i += 3 ))
+                fi
+            ;;
+        esac
+        out+=$chr
+    done
+
+    printf '%s' "$out${1:i}"
+}
+
+dm_name_for_devnode() {
+    read -r dm_name <"/sys/class/block/${1#/dev/}/dm/name"
+    if [[ $dm_name ]]; then
+        printf '/dev/mapper/%s' "$dm_name"
+    else
+        # don't leave the caller hanging, just print the original name
+        # along with the failure.
+        print '%s' "$1"
+        error 'Failed to resolve device mapper name for: %s' "$1"
+    fi
+}
+
+optstring_match_option() {
+    local candidate pat patterns
+
+    IFS=, read -ra patterns <<<"$1"
+    for pat in "${patterns[@]}"; do
+        if [[ $pat = *=* ]]; then
+            # "key=val" will only ever match "key=val"
+            candidate=$2
+        else
+            # "key" will match "key", but also "key=anyval"
+            candidate=${2%%=*}
+        fi
+
+        [[ $pat = "$candidate" ]] && return 0
+    done
+
+    return 1
+}
+
+optstring_remove_option() {
+    local o options_ remove=$2 IFS=,
+
+    read -ra options_ <<<"${!1}"
+
+    for o in "${!options_[@]}"; do
+        optstring_match_option "$remove" "${options_[o]}" && unset 'options_[o]'
+    done
+
+    declare -g "$1=${options_[*]}"
+}
+
+optstring_normalize() {
+    local o options_ norm IFS=,
+
+    read -ra options_ <<<"${!1}"
+
+    # remove empty fields
+    for o in "${options_[@]}"; do
+        [[ $o ]] && norm+=("$o")
+    done
+
+    # avoid empty strings, reset to "defaults"
+    declare -g "$1=${norm[*]:-defaults}"
+}
+
+optstring_append_option() {
+    if ! optstring_has_option "$1" "$2"; then
+        declare -g "$1=${!1},$2"
+    fi
+
+    optstring_normalize "$1"
+}
+
+optstring_prepend_option() {
+    if ! optstring_has_option "$1" "$2"; then
+        declare -g "$1=$2,${!1}"
+    fi
+
+    optstring_normalize "$1"
+}
+
+optstring_get_option() {
+    local opts o
+
+    IFS=, read -ra opts <<<"${!1}"
+    for o in "${opts[@]}"; do
+        if optstring_match_option "$2" "$o"; then
+            declare -g "$o"
+            return 0
+        fi
+    done
+
+    return 1
+}
+
+optstring_has_option() {
+    local "${2%%=*}"
+
+    optstring_get_option "$1" "$2"
+}
 
 write_source() {
-    local src=$1 spec= label= uuid= comment=()
+    local src=$1 spec label uuid comment=()
 
     label=$(lsblk -rno LABEL "$1" 2>/dev/null)
     uuid=$(lsblk -rno UUID "$1" 2>/dev/null)
@@ -45,7 +249,7 @@ write_source() {
         ;;
     esac
 
-    [[ $comment ]] && printf '# %s\n' "${comment[*]}"
+    [[ -n "${comment[*]}" ]] && printf '# %s\n' "${comment[*]}"
 
     if [[ $spec ]]; then
         printf '%-20s' "$bytag=$(mangle "$spec")"
@@ -55,7 +259,7 @@ write_source() {
 }
 
 optstring_apply_quirks() {
-    local varname=$1 fstype=$2
+    local varname="$1" fstype="$2"
 
     # SELinux displays a 'seclabel' option in /proc/self/mountinfo. We can't know
     # if the system we're generating the fstab for has any support for SELinux (as
@@ -78,7 +282,7 @@ optstring_apply_quirks() {
         ;;
         vfat)
             # Before Linux v3.8, "cp" is prepended to the value of the codepage.
-            if optstring_get_option "$varname" codepage && [[ $codepage = cp* ]]; then
+            if optstring_get_option "$varname" codepage && [[ "$codepage" = cp* ]]; then
                 optstring_remove_option "$varname" codepage
                 optstring_append_option "$varname" "codepage=${codepage#cp}"
             fi
@@ -86,6 +290,8 @@ optstring_apply_quirks() {
     esac
 }
 
+#}}}
+
 usage() {
   cat <<EOF
 usage: ${0##*/} [options] root
@@ -158,23 +364,19 @@ while read -r src target fstype opts fsroot; do
         pass=0
     fi
 
-    if [[ $fsroot != / ]]; then
-        if [[ $fstype = btrfs ]]; then
-            opts+=,subvol=${fsroot#/}
-        else
-            # it's a bind mount
-            src=$(findmnt -funcevo TARGET "$src")$fsroot
-            if [[ $src -ef $target ]]; then
-                # hrmm, this is weird. we're probably looking at a file or directory
-                # that was bound into a chroot from the host machine. Ignore it,
-                # because this won't actually be a valid mount. Worst case, the user
-                # just re-adds it.
-                continue
-            fi
-            fstype=none
-            opts+=,bind
-            pass=0
+    if [[ $fsroot != / && $fstype != btrfs ]]; then
+        # it's a bind mount
+        src=$(findmnt -funcevo TARGET "$src")$fsroot
+        if [[ $src -ef $target ]]; then
+            # hrmm, this is weird. we're probably looking at a file or directory
+            # that was bound into a chroot from the host machine. Ignore it,
+            # because this won't actually be a valid mount. Worst case, the user
+            # just re-adds it.
+            continue
         fi
+        fstype=none
+        opts+=,bind
+        pass=0
     fi
 
     # filesystem quirks
@@ -203,7 +405,7 @@ done
 # handle swaps devices
 {
     # ignore header
-    read
+    read -r
 
     while read -r device type _ _ prio; do
         options=defaults

bin/base/mkchroot.in

@@ -12,7 +12,9 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-base.sh
+m4_include(lib/base/message.sh)
+m4_include(lib/base/chroot.sh)
+m4_include(lib/base/chroot-version.sh)
 
 working_dir=''
 umode=''
@@ -21,20 +23,18 @@ files=()
 chroot_args=()
 
 usage() {
-    echo "Usage: ${0##*/} [options] working-dir package-list..."
-    echo ' options:'
-    echo '    -U            Use pacman -U to install packages'
-    echo '    -C <file>     Location of a pacman config file'
-    echo '    -M <file>     Location of a makepkg config file'
-    echo '    -c <dir>      Set pacman cache'
-    echo '    -f <file>     Copy file from the host to the chroot'
-    echo '    -s            Do not run setarch'
-    echo '    -h            This message'
+    printf "Usage: %s [options] working-dir package-list...\n" "${0##*/}"
+    printf ' options:\n'
+    printf '    -U            Use pacman -U to install packages\n'
+    printf '    -C <file>     Location of a pacman config file\n'
+    printf '    -M <file>     Location of a makepkg config file\n'
+    printf '    -c <dir>      Set pacman cache\n'
+    printf '    -f <file>     Copy file from the host to the chroot\n'
+    printf '    -s            Do not run setarch\n'
+    printf '    -h            This message\n'
     exit 1
 }
 
-orig_argv=("$0" "$@")
-
 opts='hUC:M:c:f:s'
 
 while getopts ${opts} arg; do
@@ -46,35 +46,32 @@ while getopts ${opts} arg; do
         f) files+=("$OPTARG") ;;
         s) nosetarch=1 ;;
         h|?) usage ;;
-        *) error "invalid argument '%s'" "$arg"; usage ;;
     esac
     if [[ $arg != U ]]; then
         chroot_args+=("-$arg")
         [[ -v OPTARG ]] && chroot_args+=("$OPTARG")
     fi
 done
-shift $(($OPTIND - 1))
+shift $(( OPTIND - 1 ))
 
 (( $# < 2 )) && die 'You must specify a directory and one or more packages.'
 
 check_root
 
-working_dir="$(readlink -f $1)"
+working_dir="$(readlink -f "$1")"
 shift 1
 
 [[ -z $working_dir ]] && die 'Please specify a working directory.'
 
-pacconf_cmd=$(command -v pacman-conf || command -v pacconf)
-
 if (( ${#cache_dirs[@]} == 0 )); then
-	mapfile -t cache_dirs < <($pacconf_cmd CacheDir)
+	mapfile -t cache_dirs < <(pacman-conf CacheDir)
 fi
 
 umask 0022
 
-#[[ -e $working_dir ]] && die "Working directory '%s' already exists" "$working_dir"
+[[ -e $working_dir ]] && die "Working directory '%s' already exists" "$working_dir"
 
-#mkdir -p "$working_dir"
+mkdir -p "$working_dir"
 
 [[ ! -d $working_dir ]] && mkdir -p "$working_dir"
 
@@ -94,11 +91,12 @@ for f in "${files[@]}"; do
 done
 
 basestrap -${umode}Mc ${pacman_conf:+-C "$pacman_conf"} "$working_dir" \
-    ${cache_dirs[@]/#/--cachedir=} "$@" || die 'Failed to install all packages'
+    "${cache_dirs[@]/#/--cachedir=}" "$@" || die 'Failed to install all packages'
 
 printf '%s.UTF-8 UTF-8\n' en_US de_DE > "$working_dir/etc/locale.gen"
-echo 'LANG=en_US.UTF-8' > "$working_dir/etc/locale.conf"
-echo "${CHROOTVERSION}" > "$working_dir/.artools"
+printf 'LANG=en_US.UTF-8\n' > "$working_dir/etc/locale.conf"
+# printf 'KEYMAP=en\n' > "$working_dir/etc/vconsole.conf"
+printf "%s\n" "${CHROOTVERSION}" > "$working_dir/.artools"
 
 dbus-uuidgen --ensure="$working_dir"/etc/machine-id
 

bin/iso/buildiso.in

@@ -12,78 +12,227 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-iso.sh
+m4_include(lib/util-base.sh)
+m4_include(lib/util-iso.sh)
+m4_include(lib/base/message.sh)
+m4_include(lib/base/common.sh)
+m4_include(lib/base/chroot.sh)
+m4_include(lib/iso/mount.sh)
+m4_include(lib/iso/services.sh)
+m4_include(lib/base/yaml.sh)
+m4_include(lib/iso/calamares.sh)
+m4_include(lib/iso/config.sh)
+m4_include(lib/iso/firmware.sh)
+m4_include(lib/iso/dracut.sh)
+m4_include(lib/iso/initcpio.sh)
+m4_include(lib/iso/grub.sh)
+m4_include(lib/iso/squash.sh)
+m4_include(lib/iso/iso.sh)
+m4_include(lib/iso/profile.sh)
+m4_include(lib/iso/trap.sh)
 
-prepare_artools
+clean_up_chroot(){
+    local path mnt="$1"
+    msg2 "Cleaning [%s]" "${mnt##*/}"
+
+    path=$mnt/boot
+    if [[ -d "$path" ]]; then
+        find "$path" -name 'initramfs*.img' -delete &> /dev/null
+    fi
+    path=$mnt/var/lib/pacman/sync
+    if [[ -d $path ]];then
+        find "$path" -type f -delete &> /dev/null
+    fi
+    path=$mnt/var/cache/pacman/pkg
+    if [[ -d $path ]]; then
+        find "$path" -type f -delete &> /dev/null
+    fi
+    path=$mnt/var/log
+    if [[ -d $path ]]; then
+        find "$path" -type f -delete &> /dev/null
+    fi
+    path=$mnt/var/tmp
+    if [[ -d $path ]];then
+        find "$path" -mindepth 1 -delete &> /dev/null
+    fi
+    path=$mnt/tmp
+    if [[ -d $path ]];then
+        find "$path" -mindepth 1 -delete &> /dev/null
+    fi
+    # shellcheck disable=2035
+    find "$mnt" -name *.pacnew -name *.pacsave -name *.pacorig -delete
+    if [[ -f "$mnt/boot/grub/grub.cfg" ]]; then
+        rm "$mnt"/boot/grub/grub.cfg
+    fi
+    if [[ -f "$mnt/etc/machine-id" ]]; then
+        rm "$mnt"/etc/machine-id
+    fi
+}
+
+copy_overlay(){
+    local src="$1" dest="$2"
+    if [[ -e "$src" ]];then
+        msg2 "Copying [%s] ..." "${src##*/}"
+        cp -LR "$src"/* "$dest"
+    fi
+}
+
+make_rootfs() {
+    if [[ ! -e "${work_dir}"/rootfs.lock ]]; then
+        msg "Prepare [Base installation] (rootfs)"
+        local rootfs="${work_dir}/rootfs"
+
+        prepare_dir "${rootfs}"
+
+        basestrap "${basestrap_args[@]}" "${rootfs}" "${packages[@]}"
+
+        copy_overlay "${root_overlay}" "${rootfs}"
+
+        [[ -z ${live_list} ]] && configure_chroot "${rootfs}"
+
+        clean_up_chroot "${rootfs}"
+
+        : > "${work_dir}"/rootfs.lock
+
+        msg "Done [Base installation] (rootfs)"
+    fi
+}
+
+make_livefs() {
+    if [[ ! -e ${work_dir}/livefs.lock ]]; then
+        msg "Prepare [Live installation] (livefs)"
+        local livefs="${work_dir}/livefs"
+
+        prepare_dir "${livefs}"
+
+        mount_overlayfs "${livefs}" "${work_dir}"
+
+        basestrap "${basestrap_args[@]}" "${livefs}" "${packages[@]}"
+
+        copy_overlay "${live_overlay}" "${livefs}"
+
+        configure_chroot "${livefs}"
+
+        umount_overlayfs
+
+        clean_up_chroot "${livefs}"
+
+        : > "${work_dir}"/livefs.lock
+
+        msg "Done [Live installation] (livefs)"
+    fi
+}
+
+make_bootfs() {
+    if [[ ! -e ${work_dir}/bootfs.lock ]]; then
+        msg "Prepare [/iso/boot]"
+
+        prepare_dir "${iso_root}/boot"
+
+        cp "${work_dir}"/rootfs/boot/vmlinuz* "${iso_root}"/boot/vmlinuz-"${arch}"
+
+        local bootfs="${work_dir}/bootfs"
+
+        mount_overlayfs "${bootfs}" "${work_dir}"
+
+        if "${use_dracut}"; then
+            prepare_initramfs_dracut "${bootfs}"
+        else
+            prepare_initramfs_mkinitcpio "${bootfs}"
+        fi
+
+        umount_overlayfs
+
+        rm -R "${bootfs}"
+        : > "${work_dir}"/bootfs.lock
+        msg "Done [/iso/boot]"
+    fi
+}
+
+make_grub(){
+    if [[ ! -e ${work_dir}/grub.lock ]]; then
+        msg "Prepare [/iso/boot/grub]"
+
+        local layer=${work_dir}/rootfs
+        [[ -n ${live_list} ]] && layer=${work_dir}/livefs
+
+        prepare_grub "${work_dir}/rootfs" "$layer"
+
+        if ${use_dracut}; then
+            configure_grub_dracut
+        else
+            configure_grub_mkinitcpio
+        fi
+
+        : > "${work_dir}"/grub.lock
+        msg "Done [/iso/boot/grub]"
+    fi
+}
 
 gen_iso_fn(){
     local vars=("artix") name
-    vars+=("${PROFILE}")
+    vars+=("${profile}")
     vars+=("${INITSYS}")
-    case "${REPOSITORY}" in
-        'gremlins'|'goblins') vars+=("${REPOSITORY}") ;;
+    case "${repo}" in
+        'gremlins'|'goblins') vars+=("${repo}") ;;
     esac
     vars+=("${ISO_VERSION}")
-    vars+=("${ARCH}")
-    for n in ${vars[@]};do
+    vars+=("${arch}")
+    for n in "${vars[@]}"; do
         name=${name:-}${name:+-}${n}
     done
-    echo $name
+    printf "%s\n" "$name"
 }
 
 prepare_build(){
-    timer_start=$(get_timer)
-
     load_profile
 
-    local pacman_conf pac_file="pacman-default.conf"
-
-    case "${REPOSITORY}" in
-        'gremlins'|'goblins') pac_file="pacman-${REPOSITORY}.conf" ;;
+    case "${repo}" in
+        'gremlins'|'goblins') repo="${repo}" ;;
+        *) repo=default ;;
     esac
 
-    pacman_conf="${DATADIR}/$pac_file"
-    [[ -f ${USER_CONF_DIR}/$pac_file ]] && pacman_conf="${USER_CONF_DIR}/$pac_file"
+    get_pacman_conf "${repo}"
 
     iso_file=$(gen_iso_fn).iso
 
     iso_label="ARTIX_$(date +%Y%m)"
 
-    basestrap_args+=(-C ${pacman_conf})
-    work_dir=${CHROOTS_ISO}/${PROFILE}/artix
+    basestrap_args+=(-C "${pacman_conf}")
+    work_dir=${chroots_iso}/${profile}/artix
 
-    prepare_dir "${ISO_POOL}"
+    iso_dir="${ISO_POOL}/${profile}"
 
-    iso_dir="${ISO_POOL}/${PROFILE}"
-
-    iso_root=${CHROOTS_ISO}/${PROFILE}/iso
+    iso_root=${chroots_iso}/${profile}/iso
     live_dir=/LiveOS
 
-    mnt_dir=${CHROOTS_ISO}/${PROFILE}/mnt
+    mnt_dir=${chroots_iso}/${profile}/mnt
 
-    prepare_dir "${mnt_dir}"
-    prepare_dir "${iso_dir}"
-    prepare_dir "${iso_root}"
+    if [[ -n "${GPG_KEY}" ]]; then
+        ${use_dracut} || export_gpg_publickey
+    fi
 }
 
 display_settings(){
     msg "OPTIONS:"
-    msg2 "PROFILE: %s" "${PROFILE}"
+    msg2 "profile: %s" "${profile}"
     msg2 "INITSYS: %s" "${INITSYS}"
     [[ -n ${GPG_KEY} ]] && msg2 "GPG_KEY: %s" "${GPG_KEY}"
 
     msg "ISO SETTINGS:"
     msg2 "ISO_VERSION: %s" "${ISO_VERSION}"
+    msg2 "COMPRESSION: %s" "${COMPRESSION}"
+    [[ "${COMPRESSION}" == 'zstd' ]] && msg2 "COMPRESSION_LEVEL: %s" "${COMPRESSION_LEVEL}"
 
     msg "BUILD:"
     show_profile
 }
 
 mk_squash(){
-    local timer=$(get_timer)
     make_sfs "${work_dir}/rootfs"
-    [[ -d "${work_dir}/livefs" ]] && make_sfs "${work_dir}/livefs"
-    show_elapsed_time "${FUNCNAME}" "${timer}"
+    if [[ -d "${work_dir}/livefs" ]]; then
+        make_sfs "${work_dir}/livefs"
+    fi
 }
 
 mk_iso(){
@@ -96,29 +245,25 @@ mk_iso(){
         rm -rf "${iso_dir}/${iso_file}"
     fi
     assemble_iso
-    chown -R "${OWNER}:$(id --group ${OWNER})" "${iso_dir}"
+    chown -R "${owner}:$(id --group "${owner}")" "${iso_dir}"
 }
 
 mk_boot(){
-    local timer=$(get_timer)
     run_safe "make_bootfs"
     run_safe "make_grub"
-    show_elapsed_time "${FUNCNAME}" "${timer}"
 }
 
 mk_chroots(){
-    local timer=$(get_timer)
-    load_pkgs "${ROOT_LIST}" "${INITSYS}"
+    load_pkgs "${root_list}"
     run_safe "make_rootfs"
-    if [[ -n ${LIVE_LIST} ]]; then
-        load_pkgs "${LIVE_LIST}" "${INITSYS}"
+    if [[ -n ${live_list} ]]; then
+        load_pkgs "${live_list}"
         run_safe "make_livefs"
     fi
-    show_elapsed_time "${FUNCNAME}" "${timer}"
 }
 
 build(){
-    msg "Start building [%s]" "${PROFILE}"
+    msg "Start building [%s]" "${profile}"
     if ${clean_first};then
         for copy in "${work_dir}"/*; do
             [[ -d $copy ]] || continue
@@ -137,35 +282,28 @@ build(){
         rm -rf --one-file-system "${iso_root}"
     fi
 
-    case true in
-        ${chroot_only})
-            mk_chroots
-            warning "Continue squash: %s -p %s -sc ..." "${cmd}" "${PROFILE}"
-            exit 1
-        ;;
-        ${boot_only})
-            mk_boot
-            warning "Continue iso: %s -p %s -zc ..." "${cmd}" "${PROFILE}"
-            exit 1
-        ;;
-        ${squash_only})
-            mk_squash
-            warning "Continue boot: %s -p %s -bc ..." "${cmd}" "${PROFILE}"
-            exit 1
-        ;;
-        ${iso_only})
-            [[ ! -d ${work_dir} ]] && die "Create chroot: %s -p %s -x" "${cmd}" "${PROFILE}"
-            mk_iso
-        ;;
-        *)
-            mk_chroots
-            mk_boot
-            mk_squash
-            mk_iso
-        ;;
-    esac
-    msg "Finished building [%s]" "${PROFILE}"
-    show_elapsed_time "${FUNCNAME}" "${timer_start}"
+    if ${chroot_only}; then
+        mk_chroots
+        warning "Continue squash: %s -p %s -sc ..." "${cmd}" "${profile}"
+        exit 1
+    elif ${boot_only}; then
+        mk_boot
+        warning "Continue iso: %s -p %s -zc ..." "${cmd}" "${profile}"
+        exit 1
+    elif ${squash_only}; then
+        mk_squash
+        warning "Continue boot: %s -p %s -bc ..." "${cmd}" "${profile}"
+        exit 1
+    elif ${iso_only}; then
+        [[ ! -d ${work_dir} ]] && die "Create chroot: %s -p %s -x" "${cmd}" "${profile}"
+        mk_iso
+    else
+        mk_chroots
+        mk_boot
+        mk_squash
+        mk_iso
+    fi
+    msg "Finished building [%s]" "${profile}"
 }
 
 clean_first=true
@@ -180,42 +318,44 @@ boot_only=false
 basestrap_args=(-GMc)
 cmd=${0##*/}
 
-REPOSITORY=${cmd##*-}
+repo=${cmd##*-}
+owner=${SUDO_USER:-$USER}
+profile='base'
+chroots_iso="${CHROOTS_DIR}/buildiso"
+arch=$(uname -m)
 
 usage() {
-    echo "Usage: ${cmd} [options]"
-    echo "    -p <profile>       Profile [default: ${PROFILE}]"
-    echo '    -r <dir>           Chroots directory'
-    echo "                       [default: ${CHROOTS_ISO}]"
-    echo '    -t <dir>           Target directory'
-    echo "                       [default: ${ISO_POOL}]"
-    echo '    -i <name>          Init system to use'
-    echo "                       [default: ${INITSYS}]"
-    echo '    -g <key>           The gpg key for img signing'
-    echo "                       [default: ${GPG_KEY}]"
-    echo '    -m                 Set SquashFS image mode to persistence'
-    echo '    -c                 Disable clean work dir'
-    echo '    -x                 Build chroot only'
-    echo '    -s                 Squash chroot only'
-    echo '    -b                 Generate iso boot only'
-    echo '    -z                 Generate iso only'
-    echo '                       Requires pre built images (-x)'
-    echo '    -d                 Use dracut instead of mkinitcpio for iso initramfs'
-    echo '    -q                 Query settings and pretend build'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
-    exit $1
+    printf 'Usage: %s [options]\n' "${cmd}"
+    printf '    -p <profile>       Profile [default: %s]\n' "${profile}"
+    printf '    -r <dir>           Chroots directory\n'
+    printf '                       [default: %s]\n' "${chroots_iso}"
+    printf '    -t <dir>           Target directory\n'
+    printf '                       [default: %s]\n' "${ISO_POOL}"
+    printf '    -i <name>          Init system to use\n'
+    printf '                       [default: %s]\n' "${INITSYS}"
+    printf '    -g <key>           The gpg key for img signing\n'
+    printf '                       [default: none]\n'
+    printf '    -m                 Set SquashFS image mode to persistence\n'
+    printf '    -c                 Disable clean work dir\n'
+    printf '    -x                 Build chroot only\n'
+    printf '    -s                 Squash chroot only\n'
+    printf '    -b                 Generate iso boot only\n'
+    printf '    -z                 Generate iso only\n'
+    printf '                       Requires pre built images (-x)\n'
+    printf '    -d                 Use dracut instead of mkinitcpio for iso initramfs\n'
+    printf '    -q                 Query settings and pretend build\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf '\n'
+    exit "$1"
 }
 
-orig_argv=("$0" "$@")
-
 opts='p:r:t:i:g:czsbxmdqh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
-        p) PROFILE="$OPTARG" ;;
-        r) CHROOTS_ISO="$OPTARG" ;;
+        p) profile="$OPTARG" ;;
+        r) chroots_iso="$OPTARG" ;;
         t) ISO_POOL="$OPTARG" ;;
         i) INITSYS="$OPTARG" ;;
         g) GPG_KEY="$OPTARG" ;;
@@ -228,18 +368,21 @@ while getopts "${opts}" arg; do
         d) use_dracut=true ;;
         q) pretend=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 
-shift $(($OPTIND - 1))
-
-check_root
-
-prepare_traps
+shift $(( OPTIND - 1 ))
 
 prepare_build
 
 ${pretend} && display_settings && exit 1
 
+check_root
+
+prepare_dir "${mnt_dir}"
+prepare_dir "${iso_dir}"
+prepare_dir "${iso_root}"
+
+prepare_traps
+
 build

bin/iso/deployiso.in

@@ -1,73 +0,0 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-. @libdir@/artools/util-iso.sh
-
-prepare_artools
-
-connect(){
-    echo "${ACCOUNT}@${FILE_HOST}:${FILE_HOME}"
-}
-
-prepare_transfer(){
-    DEST_DIR="/iso/${PROFILE}/"
-    SRC_DIR="${ISO_POOL}/${PROFILE}/"
-}
-
-sync_dir(){
-    msg "Start upload [%s] ..." "${PROFILE}"
-    rsync "${rsync_args[@]}" ${SRC_DIR} $(connect)${DEST_DIR}
-    msg "Done upload [%s]" "${PROFILE}"
-    show_elapsed_time "${FUNCNAME}" "${timer_start}"
-}
-
-update=false
-verbose=false
-
-rsync_args=(-aP --progress -e "ssh -p ${FILE_PORT}")
-
-usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo "    -p                 Source folder to upload [default: ${PROFILE}]"
-    echo "    -l                 Limit bandwidth in kB/s [default:${UPLIMIT}]"
-    echo '    -u                 Update remote directory'
-    echo '    -v                 Verbose output'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
-    exit $1
-}
-
-opts='p:l:uvh'
-
-while getopts "${opts}" arg; do
-    case "${arg}" in
-        p) PROFILE="$OPTARG" ;;
-        l) UPLIMIT="$OPTARG" ;;
-        u) update=true; rsync_args+=(-u) ;;
-        v) verbose=true; rsync_args+=(-v --stats) ;;
-        h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
-    esac
-done
-
-shift $(($OPTIND - 1))
-
-timer_start=$(get_timer)
-
-rsync_args+=(--bwlimit=${UPLIMIT})
-
-prepare_transfer
-
-sync_dir

bin/pkg/batchpkg.in

@@ -1,6 +1,6 @@
 #!/bin/bash
 #
-# Copyright (C) 2018-19 artoo@artixlinux.org
+# Copyright (C) 2018-20 artoo@artixlinux.org
 # Copyright (C) 2018 Artix Linux Developers
 #
 # This program is free software; you can redistribute it and/or modify
@@ -12,15 +12,17 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. /usr/lib/artools/util-pkg.sh
+m4_include(lib/util-base.sh)
+m4_include(lib/util-pkg.sh)
+m4_include(lib/base/message.sh)
 
-prepare_artools
+#{{{ functions
 
 batch_move() {
     local name="${1:-pkg_moves}"
-    local pkglist=${TREE_DIR_ARTIX}/$name.list
+    local pkglist="${TREE_DIR_ARTIX}"/"$name".list
     [[ -f $pkglist ]] || die "%s does not exist!" "$pkglist"
-    while read entry;do
+    while read -r entry; do
         local pkg=${entry##*:}
         local src=${entry%:*}
         src=${src#*:}
@@ -30,44 +32,83 @@ batch_move() {
         else
             msg "%s" "${dest}pkg -s ${src} -u -p ${pkg}"
         fi
-    done < $pkglist
+    done < "$pkglist"
 }
 
-# batch_upgrade() {
-#     local pkglist=${TREE_DIR_ARTIX}/pkg_upgrades.list
-#     [[ -f $pkglist ]] || die "%s does not exist!" "$pkglist"
-#     while read entry;do
-#         local pkg=${entry#*:}
-#         local dest=${entry%:*}
-#         echo "buildtree -i -p ${pkg}"
-#         echo "${dest}pkg -u -p ${pkg}"
-#     done < $pkglist
-# }
+batch_create() {
+    local name="${1:-pkg_create}"
+    local pkglist="${TREE_DIR_ARTIX}"/"$name".list
+    [[ -f $pkglist ]] || die "%s does not exist!" "$pkglist"
+    while read -r entry; do
+        local pkg=${entry##*:}
+        local group=${entry%:*}
+        group=${group#*:}
+        local team=${entry%%:*}
+        if ${runlist}; then
+            buildtree -n -p "${pkg}" -t "${team}" -g "${group}"
+            buildtree -i -p "${pkg}"
+            commitpkg -p "${pkg}"
+        else
+            msg "%s" "buildtree -n -p ${pkg} -t ${team} -g ${group}"
+            msg2 "%s" "buildtree -i -p ${pkg}"
+            msg2 "%s" "commitpkg -p ${pkg}"
+        fi
+    done < "$pkglist"
+}
+
+batch_update() {
+    local name="${1:-pkg_upgrades}"
+    local pkglist=${TREE_DIR_ARTIX}/$name.list
+    [[ -f $pkglist ]] || die "%s does not exist!" "$pkglist"
+    while read -r entry; do
+        local pkg=${entry#*:}
+        local dest=${entry%:*}
+        if ${runlist}; then
+            buildtree -i -p "${pkg}"
+            "${dest}"pkg -p "${pkg}"
+        else
+            msg "buildtree -i -p ${pkg}"
+            msg2 "${dest}pkg -p ${pkg}"
+        fi
+    done < "$pkglist"
+}
+
+#}}}
 
 usage() {
-    echo "Usage: ${0##*/} [optional listname]"
-    echo '    -r                 Run generated commands'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
-    exit $1
+    printf 'Usage: %s [optional listname]\n' "${0##*/}"
+    printf '    -r                 Run generated commands\n'
+    printf '    -c                 Create pkgrepos from list\n'
+    printf '    -u                 Update pkgrepos from list\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf '\n'
+    exit "$1"
 }
 
-movelistname=pkg_moves
 runlist=false
+create=false
+update=false
 
-opts='rh'
+opts='rcuh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
         r) runlist=true ;;
+        c) create=true ;;
+        u) update=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 
-shift $(($OPTIND - 1))
+shift $(( OPTIND - 1 ))
 
-movelistname="$1"; shift
+listname="$1"; shift
 
-batch_move "$movelistname"
+if ${create}; then
+    batch_create "${listname}"
+elif ${update}; then
+    batch_update "${listname}"
+else
+    batch_move "${listname}"
+fi

bin/pkg/buildpkg.in

@@ -12,50 +12,48 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-pkg.sh
-
-prepare_artools
+m4_include(lib/util-base.sh)
+m4_include(lib/base/message.sh)
+m4_include(lib/base/common.sh)
+m4_include(lib/base/chroot.sh)
 
 create_first=false
 rebuild=false
-no_check=false
-is_checkpkg=false
 
 mkchrootpkg_args=(-c -n)
 
 cmd=${0##*/}
 repo=${cmd#*-}
 base_devel=('base-devel')
+chroots_pkg="${CHROOTS_DIR}/buildpkg"
+arch=$(uname -m)
 
 usage() {
-    echo "Usage: ${0##*/} [options] -- [mkchrootpkg_args]"
-    echo "    -r <dir>           Create chroots in this directory"
-    echo "    -d <dir>           Destination repo chroot"
-    echo '    -c                 Recreate the chroot before building'
-    echo '    -m                 Major rebuild'
-    echo '    -N                 Disable check() function'
-    echo '    -C                 Run checkpkg after built'
-    echo '    -h                 This help'
-    echo ''
-    echo "Default mkchrootpkg_args args: ${mkchrootpkg_args[*]}"
-    echo ''
-    exit $1
+    printf 'Usage: %s [options] -- [mkchrootpkg_args]\n' "${0##*/}"
+    printf '    -r <dir>           Create chroots in this directory\n'
+    printf '    -d <dir>           Destination repo chroot\n'
+    printf '    -c                 Recreate the chroot before building\n'
+    printf '    -m                 Major rebuild\n'
+    printf '    -N                 Disable check() function\n'
+    printf '    -C                 Run checkpkg after built\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf 'Default mkchrootpkg_args args: %s\n' "${mkchrootpkg_args[*]}"
+    printf '\n'
+    exit "$1"
 }
 
-orig_argv=("$0" "$@")
-
 opts='hcCNmr:d:'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
-        r) CHROOTS_PKG="$OPTARG" ;;
+        r) chroots_pkg="$OPTARG" ;;
         d) repo="$OPTARG" ;;
         c) create_first=true ;;
         m) rebuild=true ;;
-        C) is_checkpkg=true; mkchrootpkg_args+=(-C) ;;
-        N) no_check=true; mkchrootpkg_args+=(-N) ;;
+        C) mkchrootpkg_args+=(-C) ;;
+        N) mkchrootpkg_args+=(-N) ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '%s'" "${arg}"; usage 1 ;;
     esac
 done
 
@@ -69,20 +67,24 @@ else
     esac
 fi
 
-pacman_conf="${DATADIR}/pacman-${repo}.conf"
-[[ -f ${USER_CONF_DIR}/pacman-${repo}.conf ]] && pacman_conf="${USER_CONF_DIR}/pacman-${repo}.conf"
+get_pacman_conf "${repo}"
 
-makepkg_conf="${DATADIR}/makepkg.conf"
-[[ -f ${USER_CONF_DIR}/makepkg.conf ]] && makepkg_conf="${USER_CONF_DIR}/makepkg.conf"
+get_makepkg_conf
 
-check_root SOURCE_DATE_EPOCH
+if [[ -f "${DATADIR}/setarch-aliases.d/${arch}" ]]; then
+	read -r set_arch < "${DATADIR}/setarch-aliases.d/${arch}"
+else
+	set_arch="${arch}"
+fi
+
+check_root SOURCE_DATE_EPOCH,SRCDEST,SRCPKGDEST,PKGDEST,LOGDEST,MAKEFLAGS,PACKAGER,GNUPGHOME
 
 mkchrootpkg_args+=("${@:$OPTIND}")
 
-if ${create_first} || [[ ! -d "${CHROOTS_PKG}/${repo}-${ARCH}" ]];then
-    msg "Creating chroot for [%s] (%s)..." "${repo}" "${ARCH}"
+if ${create_first} || [[ ! -d "${chroots_pkg}/${repo}-${arch}" ]];then
+    msg "Creating chroot for [%s] (%s)..." "${repo}" "${arch}"
 
-    for copy in "${CHROOTS_PKG}/${repo}-${ARCH}"/*; do
+    for copy in "${chroots_pkg}/${repo}-${arch}"/*; do
         [[ -d $copy ]] || continue
         msg2 "Deleting chroot copy '%s'..." "$(basename "${copy}")"
 
@@ -93,19 +95,19 @@ if ${create_first} || [[ ! -d "${CHROOTS_PKG}/${repo}-${ARCH}" ]];then
     done
     lock_close 9
 
-    rm -rf --one-file-system "${CHROOTS_PKG}/${repo}-${ARCH}"
-    (umask 0022; mkdir -p "${CHROOTS_PKG}/${repo}-${ARCH}")
-    setarch "${ARCH}" mkchroot \
+    rm -rf --one-file-system "${chroots_pkg}/${repo}-${arch}"
+    (umask 0022; mkdir -p "${chroots_pkg}/${repo}-${arch}")
+    setarch "${set_arch}" mkchroot \
         -C "${pacman_conf}" \
         -M "${makepkg_conf}" \
-        "${CHROOTS_PKG}/${repo}-${ARCH}/root" \
+        "${chroots_pkg}/${repo}-${arch}/root" \
         "${base_devel[@]}" || abort
 else
-    lock 9 "${CHROOTS_PKG}/${repo}-${ARCH}/root.lock" "Locking clean chroot"
+    lock 9 "${chroots_pkg}/${repo}-${arch}/root.lock" "Locking clean chroot"
     chroot-run \
         -C "${pacman_conf}" \
         -M "${makepkg_conf}" \
-        "${CHROOTS_PKG}/${repo}-${ARCH}/root" \
+        "${chroots_pkg}/${repo}-${arch}/root" \
         pacman -Syuu --noconfirm || abort
 fi
 
@@ -114,9 +116,5 @@ if [[ ! -v SOURCE_DATE_EPOCH ]]; then
     export SOURCE_DATE_EPOCH=$(date +%s)
 fi
 
-timer_start=$(get_timer)
-
-msg "Building in chroot for [%s] (%s)..." "${repo}" "${ARCH}"
-exec mkchrootpkg -r "${CHROOTS_PKG}/${repo}-${ARCH}" "${mkchrootpkg_args[@]}"
-
-show_elapsed_time "${FUNCNAME}" "${timer_start}"
+msg "Building in chroot for [%s] (%s)..." "${repo}" "${arch}"
+exec mkchrootpkg -r "${chroots_pkg}/${repo}-${arch}" "${mkchrootpkg_args[@]}"

bin/pkg/buildtree.in

@@ -12,135 +12,194 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-pkg.sh
+m4_include(lib/util-base.sh)
+m4_include(lib/util-pkg.sh)
+m4_include(lib/base/message.sh)
+m4_include(lib/pkg/common.sh)
+m4_include(lib/pkg/git.sh)
+m4_include(lib/pkg/gitea.sh)
+m4_include(lib/pkg/repo.sh)
+m4_include(lib/pkg/jenkins.sh)
 
-prepare_artools
+#{{{ new git repo
+
+pkgrepo_new(){
+    cd "${TREE_DIR_ARTIX}/${group}" || return
+
+    local org gitname
+    org=$(get_pkg_org "${package}")
+    gitname=$(get_compliant_name "${package}")
+
+    if [[ ! -d "${package}" ]]; then
+        gitearepo -cr "$gitname"
+
+        add_team_to_repo "$gitname" "$org" "${team}"
+
+        msg2 "Adding [%s] from (%s)" "${package}" "$org/$gitname"
+        braid add "${GIT_SSH}":"$org/$gitname".git "${package}"
+
+        prepare_dir "${TREE_DIR_ARTIX}/${group}/${package}/trunk"
+
+        commit_jenkins_files "${package}"
+    else
+        die "Package %s already exists!" "${package}"
+    fi
+}
+
+#}}}
+
+#{{{ pull
+
+config_tree() {
+    local dist="$1" vars="${2:-false}"
+    case "$dist" in
+        Artix)
+            if "$vars"; then
+                dist_tree=("${ARTIX_TREE[@]}")
+                dist_url="${GIT_SSH}:pkgbuild"
+                dist_dir=${TREE_DIR_ARTIX}
+            else
+                git config --bool pull.rebase true
+                git config commit.gpgsign true
+                if [[ -n "${GPGKEY}" ]];then
+                    git config user.signingkey "${GPGKEY}"
+                else
+                    warning "No GPGKEY configured in makepkg.conf!"
+                fi
+            fi
+        ;;
+        Arch)
+            if "$vars"; then
+                dist_tree=("${ARCH_TREE[@]}")
+                dist_url="${HOST_TREE_ARCH}"
+                dist_dir=${TREE_DIR_ARCH}
+            else
+                git config --bool pull.rebase false
+                git config branch.master.mergeoptions --no-edit
+            fi
+        ;;
+    esac
+}
+
+update_tree() {
+    local dist="${1:-Artix}"
+    config_tree "$dist" true
+    cd "$dist_dir" || return
+    for tree in "${dist_tree[@]}"; do
+        if [[ -d "$tree" ]]; then
+            ( cd "$tree" || return
+                config_tree "$dist"
+                msg "Checking (%s) (%s)" "$tree" "$dist"
+                pull_tree "$tree" "$(get_local_head)"
+            )
+        else
+            msg "Cloning (%s) (%s) ..." "$tree" "$dist"
+            git clone "$dist_url/$tree".git
+            ( cd "$tree" || return
+                config_tree "$dist"
+            )
+        fi
+    done
+}
+
+#}}}
+
+#{{{ patch
 
 patch_pkg(){
     local pkgpath="$1"
     local pkg=${pkgpath%/*}
     pkg=${pkg##*/}
+    sed -e 's|arch-meson|artix-meson|' -i "$pkgpath"/PKGBUILD
     case $pkg in
         glibc)
             msg2 "Patching %s" "$pkg"
             sed -e 's|{locale,systemd/system,tmpfiles.d}|{locale,tmpfiles.d}|' \
                 -e '/nscd.service/d' \
-                -i $pkgpath/PKGBUILD
+                -i "$pkgpath"/PKGBUILD
         ;;
         linux|linux-lts)
             msg2 "Patching %s" "$pkg"
-            sed -e 's|KBUILD_BUILD_HOST=.*|KBUILD_BUILD_HOST=artixlinux|' -i $pkgpath/PKGBUILD
+            sed -e 's|KBUILD_BUILD_HOST=.*|KBUILD_BUILD_HOST=artixlinux|' -i "$pkgpath"/PKGBUILD
             sed -e 's|CONFIG_DEFAULT_HOSTNAME=.*|CONFIG_DEFAULT_HOSTNAME="artixlinux"|' \
-                -i $pkgpath/config
+                -i "$pkgpath"/config
         ;;
         bash)
             msg2 "Patching %s" "$pkg"
+            # shellcheck disable=2016
             sed -e 's|system.bash_logout)|system.bash_logout artix.bashrc)|' \
             -e "s|etc/bash.|etc/bash/|g" \
             -e 's|"$pkgdir/etc/skel/.bash_logout"|"$pkgdir/etc/skel/.bash_logout"\n  install -Dm644 artix.bashrc $pkgdir/etc/bash/bashrc.d/artix.bashrc|' \
-            -i $pkgpath/PKGBUILD
-            cd $pkgpath
-                patch -Np 1 -i ${DATADIR}/patches/artix-bash.patch
+            -i "$pkgpath"/PKGBUILD
+            ( cd "$pkgpath" || return
+                patch -Np 1 -i "${DATADIR}"/patches/artix-bash.patch
                 updpkgsums
-            cd ../..
+            )
         ;;
         gstreamer|gst-plugins-*|licenses)
             msg2 "Patching %s" "$pkg"
             sed -e 's|https://www.archlinux.org/|https://www.artixlinux.org/|' \
                 -e 's|(Arch Linux)|(Artix Linux)|' \
-                -i $pkgpath/PKGBUILD
+                -i "$pkgpath"/PKGBUILD
         ;;
     esac
 }
 
-pull_tree_arch(){
-    cd ${TREE_DIR_ARCH}
-    for tree in ${TREE_NAMES_ARCH[@]};do
-        if [[ -d ${tree} ]];then
-            cd ${tree}
-            pull_tree "${tree}" "$(get_local_head)" "Arch"
-            cd ..
-        else
-            clone_tree "${HOST_TREE_ARCH}" "${tree}" "Arch"
-        fi
-    done
-}
+#}}}
 
-pull_tree_artix(){
-    local repos=("$1")
-    cd ${TREE_DIR_ARTIX}
-    for tree in ${repos[@]};do
-        if [[ -d ${tree} ]];then
-            config_tree "${tree}"
-            cd ${tree}
-            pull_tree "${tree}" "$(get_local_head)"
-            cd ..
-        else
-            clone_tree "${HOST_TREE_ARTIX}" "${tree}"
-            config_tree "${tree}"
-        fi
-    done
-}
+#{{{ pkgbuild import
 
 sync_pkg(){
     local rsync_args=(-aWxvci --progress --delete-before --no-R --no-implied-dirs)
     local src="$1" dest="$2"
     msg "Sync from Arch [%s] to Artix [%s]" "${src##*archlinux/}" "${dest##*artixlinux/}"
-    rsync "${rsync_args[@]}" $src/ $dest/
+    rsync "${rsync_args[@]}" "$src"/ "$dest"/
 }
 
 show_deps(){
-    local src="$1"
+    local src="$1" archver
 
-    . $src/PKGBUILD 2>/dev/null
+    # shellcheck disable=1090
+    . "$src"/PKGBUILD 2>/dev/null
 
-    [[ $arch == 'any' ]] && CARCH=any
-
-    local archver=$(get_full_version)
+    archver=$(get_full_version)
 
+    # shellcheck disable=2154
     [[ -n ${pkgbase} ]] && msg2 "pkgbase: %s" "${pkgbase}"
+    # shellcheck disable=2154
     msg2 "pkgname: %s" "${pkgname[*]}"
-    [[ -n $pkgdesc ]] && msg2 "pkgdesc: %s" "${pkgdesc}"
+    # shellcheck disable=2154
+    [[ -n "${pkgdesc}" ]] && msg2 "pkgdesc: %s" "${pkgdesc}"
+    # shellcheck disable=2154
     msg2 "Arch Version: %s" "$archver"
-    msg2 "arch: %s" "$CARCH"
-
-    [[ -n ${makedepends[@]} ]] && msg2 "makedepends: %s" "${makedepends[*]}"
-    [[ -n ${checkdepends[@]} ]] && msg2 "checkdepends: %s" "${checkdepends[*]}"
-    [[ -n ${depends[@]} ]] && msg2 "depends: %s" "${depends[*]}"
-    [[ -n ${optdepends[@]} ]] && msg2 "optdepends: %s" "${optdepends[@]}"
-}
-
-subrepo_new(){
-    cd ${TREE_DIR_ARTIX}/${GROUP}
-
-    local org=$(get_pkg_org "${PACKAGE}")
-
-    create_repo "${PACKAGE}" "$org"
-
-    add_repo_to_team "${PACKAGE}" "$org" "${TEAM}"
-
-    subrepo_clone "${PACKAGE}" "$org"
-
-    prepare_dir "${TREE_DIR_ARTIX}/${GROUP}/${PACKAGE}/trunk"
-
-    commit_jenkins_files "${PACKAGE}"
+    # shellcheck disable=2154
+    msg2 "arch: %s" "$arch"
+    # shellcheck disable=2154
+    [[ -n ${makedepends[*]} ]] && msg2 "makedepends: %s" "${makedepends[*]}"
+    # shellcheck disable=2154
+    [[ -n ${checkdepends[*]} ]] && msg2 "checkdepends: %s" "${checkdepends[*]}"
+    # shellcheck disable=2154
+    [[ -n ${depends[*]} ]] && msg2 "depends: %s" "${depends[*]}"
+    # shellcheck disable=2154
+    [[ -n ${optdepends[*]} ]] && msg2 "optdepends: %s" "${optdepends[@]}"
 }
 
 from_arch(){
-    cd ${TREE_DIR_ARTIX}
+    cd "${TREE_DIR_ARTIX}" || return
 
-    local srcpath=$(find_pkg "${TREE_DIR_ARCH}" "${PACKAGE}")
-    [[ -z $srcpath ]] && die "Package '%s' does not exist!" "${PACKAGE}"
+    local srcpath repo archpath artixpath
+    srcpath=$(find_pkg "${TREE_DIR_ARCH}" "${package}")
+    [[ -z $srcpath ]] && die "Package '%s' does not exist!" "${package}"
 
-    local repo=$(find_repo "$srcpath")
+    repo=$(find_repo "$srcpath")
     msg "repo: %s" "$repo"
 
-    local archpath=$srcpath/repos/$repo
-    local artixpath=$(find_pkg "${TREE_DIR_ARTIX}" "${PACKAGE}")
+    archpath=$srcpath/repos/$repo
+    artixpath=$(find_pkg "${TREE_DIR_ARTIX}" "${package}")
 
     show_deps "$archpath"
 
-    if [[ -f "$artixpath"/.gitrepo ]]; then
+    if [[ -f "$artixpath"/Jenkinsfile ]]; then
         artixpath="$artixpath"/trunk
 
         if [[ -d "$artixpath" ]];then
@@ -148,24 +207,28 @@ from_arch(){
             patch_pkg "$artixpath"
         fi
     else
-        die "Package '%s' does not exist!" "${PACKAGE}"
+        die "Package '%s' does not exist!" "${package}"
     fi
 }
 
+#}}}
+
 view_build(){
-    local archpath=$(find_pkg "${TREE_DIR_ARCH}" "${PACKAGE}")
-    [[ -z $archpath ]] && die "Package '%s' does not exist!" "${PACKAGE}"
-    local repo=$(find_repo "${archpath}")
+    local archpath repo
+    archpath=$(find_pkg "${TREE_DIR_ARCH}" "${package}")
+    [[ -z $archpath ]] && die "Package '%s' does not exist!" "${package}"
+    repo=$(find_repo "${archpath}")
     archpath=$archpath/repos/$repo
-    msg2 "repo: %s" "$repo"
+    msg "repo: %s" "${repo#*/}"
     show_deps "$archpath"
 }
 
 check_tree(){
-    local archpath=$(find_pkg "${TREE_DIR_ARCH}" "${PACKAGE}")
-    [[ -z $archpath ]] && die "Package '%s' does not exist!" "${PACKAGE}"
-    local artixpath=$(find_pkg "${TREE_DIR_ARTIX}" "${PACKAGE}")
-    local group=${artixpath%/*}
+    local archpath artixpath group
+    archpath=$(find_pkg "${TREE_DIR_ARCH}" "${package}")
+    [[ -z $archpath ]] && die "Package '%s' does not exist!" "${package}"
+    artixpath=$(find_pkg "${TREE_DIR_ARTIX}" "${package}")
+    group=${artixpath%/*}
     msg "group: %s" "${group##*/}"
 
     [[ -z $artixpath ]] && msg2 "exists: %s" "no"
@@ -173,18 +236,14 @@ check_tree(){
 }
 
 sync_repos(){
-    ${sync_arch} && pull_tree_arch
-    if ${sync_artix};then
-        if ${sync_group}; then
-            pull_tree_artix "${GROUP}"
-        else
-            pull_tree_artix "${TREE_NAMES_ARTIX[*]}"
-        fi
-    fi
+    ${sync_arch} && update_tree "Arch"
+    ${sync_artix} && update_tree
 }
 
 load_makepkg_config
 
+load_valid_names
+
 testing=true
 staging=true
 unstable=false
@@ -195,47 +254,44 @@ sync_artix=true
 import=false
 view=false
 createnew=false
-sync_group=false
 check=false
 
-PACKAGE=''
+package=''
 
-TEAM='community'
-GROUP=${TREE_NAMES_ARTIX[0]}
+team='community'
+group="${ARTIX_TREE[0]}"
 
 usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo '    -p <pkg>      Package name'
-    echo '    -t <team>     Team name (only with -n)'
-    echo '                  Possible values: core,extra,community,multilib'
-    echo "                  [default: ${TEAM}]"
-    echo '    -g <group>    Group name, the superrepo (only with -n or -s)'
-    echo "                  [default: ${GROUP}]"
-    echo "    -s            Clone or pull repos"
-    echo "    -a            Don't clone or pull arch repos"
-    echo "    -b            Don't clone or pull artix repos"
-    echo '    -i            Import a package from arch repos'
-    echo '    -n            New remote subrepo and clone it'
-    echo '    -v            Check if a package is in the artix tree(s)'
-    echo '    -c            View package depends'
-    echo '    -x            Exclude testing (only with -i)'
-    echo '    -y            Exclude staging (only with -i)'
-    echo '    -z            Include kde & gnome unstable (only with -i)'
-    echo '    -h            This help'
-    echo ''
-    echo ''
-    exit $1
+    printf "Usage: %s [options]\n" "${0##*/}"
+    printf '    -p <pkg>      Package name\n'
+    printf '    -t <team>     Team name (only with -n)\n'
+    printf '                  Possible values: core,extra,community,multilib\n'
+    printf "                  [default: %s]\n" "${team}"
+    printf '    -g <group>    Group name, the superrepo (only with -n)\n'
+    printf "                  [default: %s]\n" "${group}"
+    printf "    -s            Clone or pull repos\n"
+    printf "    -a            Don't clone or pull arch repos\n"
+    printf "    -b            Don't clone or pull artix repos\n"
+    printf '    -i            Import a package from arch repos\n'
+    printf '    -n            New remote pkgrepo and add it\n'
+    printf '    -v            Check if a package is in the artix tree(s)\n'
+    printf '    -c            View package depends\n'
+    printf '    -x            Exclude testing (only with -i)\n'
+    printf '    -y            Exclude staging (only with -i)\n'
+    printf '    -z            Include kde & gnome unstable (only with -i)\n'
+    printf '    -h            This help\n'
+    printf '\n'
+    printf '\n'
+    exit "$1"
 }
 
-orig_argv=("$0" "$@")
-
 opts='p:t:g:sinabcvxyzh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
-        p) PACKAGE="$OPTARG" ;;
-        t) TEAM="$OPTARG" ;;
-        g) GROUP="$OPTARG"; sync_group=true ;;
+        p) package="$OPTARG" ;;
+        t) team="$OPTARG" ;;
+        g) group="$OPTARG" ;;
         s) sync=true ;;
         a) sync_arch=false ;;
         b) sync_artix=false ;;
@@ -247,14 +303,10 @@ while getopts "${opts}" arg; do
         y) staging=false ;;
         z) unstable=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 
-shift $(($OPTIND - 1))
-
-prepare_dir "${TREE_DIR_ARTIX}"
-prepare_dir "${TREE_DIR_ARCH}"
+shift $(( OPTIND - 1 ))
 
 set_arch_repos "$testing" "$staging" "$unstable"
 
@@ -266,4 +318,4 @@ ${check} && check_tree
 
 ${import} && from_arch
 
-${createnew} && subrepo_new
+${createnew} && pkgrepo_new

bin/pkg/checkpkg.in

@@ -12,12 +12,14 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-pkg.sh
+m4_include(lib/base/message.sh)
 
 shopt -s extglob
 
 load_makepkg_config
 
+#{{{ functions
+
 pkgver_equal() {
     if [[ $1 = *-* && $2 = *-* ]]; then
         # if both versions have a pkgrel, then they must be an exact match
@@ -80,6 +82,8 @@ find_cached_package() {
     esac
 }
 
+#}}}
+
 usage() {
     cat <<- _EOF_
         Usage: ${BASH_SOURCE[0]##*/} [OPTIONS]
@@ -193,7 +197,7 @@ for _pkgname in "${pkgname[@]}"; do
     if ! diff_output="$(sdiff -s "$TEMPDIR/libraries-$_pkgname-old" "$TEMPDIR/libraries-$_pkgname")"; then
         message="Sonames differ in $_pkgname!"
         (( WARN )) && warning "$message" || msg "$message"
-        echo "$diff_output"
+        printf "%s\n" "$diff_output"
     else
         msg "No soname differences for %s." "$_pkgname"
     fi

bin/pkg/checkrepo.in

@@ -0,0 +1,250 @@
+#!/bin/bash
+#
+# Copyright (C) 2018-19 artoo@artixlinux.org
+# Copyright (C) 2018 Artix Linux Developers
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+m4_include(lib/util-base.sh)
+m4_include(lib/util-pkg.sh)
+m4_include(lib/base/message.sh)
+m4_include(lib/pkg/repo.sh)
+m4_include(lib/pkg/table.sh)
+
+#{{{ db libs
+
+extract_db() {
+    local u="$1" cdir="$2"
+    rm -rf "$cdir"
+    mkdir -p "$cdir"
+    msg2 "%s" "${cdir##*/}"
+    curl -L -s "$u" | bsdtar -xf - -C "$cdir"
+}
+
+update_db_cache(){
+    msg "Updating database cache ..."
+    local cachedir url
+    for repo in "${searchrepos[@]}"; do
+        cachedir=${db_cache_dir}/linksdb/$repo
+        url=${REPOS_MIRROR}/$repo/os/${CARCH}/$repo.${linksdb_ext}
+        extract_db "$url" "$cachedir"
+    done
+    msg "Done"
+}
+
+#}}}
+
+#{{{ sogrep
+
+query_db() {
+    for repo in "${searchrepos[@]}"; do
+        local db
+        db=${db_cache_dir}/linksdb/$repo/
+        if [[ -d ${db} ]]; then
+            while read -rd '' pkg; do
+                read -r match
+                pkg=${pkg#${db}}
+                pkg="${pkg%/*}"
+                msg_row "${tableQ}" "$repo" "$pkg" "${match}"
+            done < <(grep -rZ "$library" "$db") | sort -u
+        fi
+    done
+}
+
+#}}}
+
+#{{{ check db
+
+is_db_entry() {
+    local pkgname="$1" repo="${REPOS[$2]}" entry
+    entry=${db_cache_dir}/linksdb/$repo/$pkgname
+
+    if [[ -d "$entry" ]];then
+        return 0
+    fi
+    return 1
+}
+
+check_db(){
+    local pkgpath="${1}"
+
+    for repo in "${!REPOS[@]}"; do
+
+        local pkgbuild artixver
+        if [[ -f $pkgpath/$repo/PKGBUILD ]]; then
+            pkgbuild=$pkgpath/$repo/PKGBUILD
+
+            # shellcheck disable=1090
+            . "$pkgbuild" 2>/dev/null
+            artixver=$(get_full_version)
+            for name in "${pkgname[@]}"; do
+                if ! is_db_entry "$name-$artixver" "$repo"; then
+                    msg_row_red "${tableU}" "$repo" "$name" "$artixver" "false"
+                else
+                    ${all_db} && msg_row "${tableU}" "$repo" "$name" "$artixver" "true"
+                fi
+            done
+            unset artixver pkgbuild pkgver epoch pkgname pkgbase
+        fi
+    done
+}
+
+#}}}
+
+# {{{ check obsolete
+
+show_obsolete_table() {
+    local arch_mirror='https://mirror.f4st.host/archlinux'
+
+    local arch_repo artix_repo artix_db arch_db url
+    arch_repo="${searchrepos[@]}"
+    artix_repo="${REPOS[$arch_repo]}"
+
+    artix_db="${db_cache_dir}/artixdb/${artix_repo}"
+    arch_db="${db_cache_dir}/archdb/${arch_repo}"
+
+    msg "Updating database cache ..."
+    url=${REPOS_MIRROR}/${artix_repo}/os/$CARCH/${artix_repo}.${db_ext}
+    extract_db "$url" "${artix_db}"
+
+    url=${arch_mirror}/${arch_repo}/os/$CARCH/${arch_repo}.${db_ext}
+    extract_db "$url" "${arch_db}"
+    msg "Done"
+
+    msg_table_header "${tableQ}" "Repo" "Package" "Obsolete"
+    for p in "${artix_db}"/*; do
+        local pkg rel
+        pkg=${p##*/}
+        rel=${pkg##*-}
+        rel=${rel%.*}
+        pkg=${pkg%-*}
+        local p="$pkg-$rel"
+
+        if [[ "$p" != *openrc* ]] && [[ "$p" != *runit* ]] \
+        && [[ "$p" != *s6* ]] && [[ "$p" != *suite66* ]] \
+        && [[ "$p" != *udev* ]] && [[ "$p" != *elogind* ]] \
+        && [[ "$p" != *sysusers* ]] && [[ "$p" != *tmpfiles* ]] \
+        && [[ "$p" != *execline* ]] && [[ "$p" != *skalibs* ]] \
+        && [[ "$p" != *netifrc* ]] && [[ "$p" != *bootlogd* ]] \
+        && [[ "$p" != *pam_rundir* ]] && [[ "$p" != *artools* ]] \
+        && [[ "$p" != *archlinux* ]] && [[ "$p" != *iso-profiles* ]] \
+        && [[ "$p" != *calamares* ]] && [[ "$p" != *iso-initcpio* ]] \
+        && [[ "$p" != *dinit* ]] && [[ "$p" != *artix* ]] && [[ "$p" != *blocaled* ]]; then
+            if [[ ! -d "${arch_db}/$p" ]]; then
+                msg_row "${tableQ}" "${artix_repo}" "$p" "true"
+            fi
+        fi
+    done
+}
+
+#}}}
+
+show_lib_table() {
+    msg_table_header "${tableQ}" "Repo" "Package" "Library"
+    query_db
+}
+
+show_db_table(){
+    msg_table_header "${tableU}" "Repo" "Package" "Version" "Database"
+    tree_loop check_db
+}
+
+db_cache_dir="${XDG_CACHE_HOME:-$USER_HOME/.cache}/artools"
+
+linksdb_ext="links.tar.${DBEXT}"
+db_ext="db.tar.${DBEXT}"
+
+load_makepkg_config
+
+sync=false
+check=false
+query=false
+all_db=false
+obsolete=false
+
+readonly tableU="%-20s %-35s %-30s %-10s"
+readonly tableQ="%-20s %-55s %s"
+
+load_valid_names
+
+#{{{ repo names arrays
+
+declare -A REPOS=(
+    [${valid_names[0]}]=system
+    [${valid_names[1]}]=world
+    [${valid_names[2]}]=galaxy
+    [${valid_names[3]}]=lib32
+    [${valid_names[4]}]=gremlins
+    [${valid_names[5]}]=galaxy-gremlins
+    [${valid_names[6]}]=lib32-gremlins
+    [${valid_names[7]}]=goblins
+    [${valid_names[8]}]=galaxy-goblins
+    [${valid_names[9]}]=lib32-goblins
+    [${valid_names[11]}]=kde-wobble
+    [${valid_names[12]}]=gnome-wobble
+)
+
+searchrepos=(
+    "${REPOS[${valid_names[11]}]}"
+    "${REPOS[${valid_names[12]}]}"
+    "${REPOS[${valid_names[7]}]}"
+    "${REPOS[${valid_names[8]}]}"
+    "${REPOS[${valid_names[9]}]}"
+    "${REPOS[${valid_names[4]}]}"
+    "${REPOS[${valid_names[5]}]}"
+    "${REPOS[${valid_names[6]}]}"
+    "${REPOS[${valid_names[0]}]}"
+    "${REPOS[${valid_names[1]}]}"
+    "${REPOS[${valid_names[2]}]}"
+    "${REPOS[${valid_names[3]}]}"
+)
+
+#}}}
+
+usage() {
+    printf "Usage: %s [options] (with -q [libname])\n" "${0##*/}"
+    printf '    -r <repo>     Repo name to query\n'
+    printf '                  [default: all]\n'
+    printf "    -s            Sync repo databases\n"
+    printf '    -c            Check repos\n'
+    printf '    -a            Show repo db (-c)\n'
+    printf '    -o            Check for obsolete packages\n'
+    printf "    -q            Query repo databases for so libs\n"
+    printf '    -h            This help\n'
+    printf '\n'
+    printf '\n'
+    exit "$1"
+}
+
+opts='r:qcsaoh'
+
+while getopts "${opts}" arg; do
+    case "${arg}" in
+        r) searchrepos=("$OPTARG") ;;
+        s) sync=true ;;
+        c) check=true ;;
+        a) all_db=true ;;
+        q) query=true ;;
+        o) obsolete=true ;;
+        h|?) usage 0 ;;
+    esac
+done
+
+shift $(( OPTIND - 1 ))
+
+library="$1"; shift
+
+${sync} && update_db_cache
+
+${check} && show_db_table
+
+${query} && show_lib_table
+
+${obsolete} && show_obsolete_table

bin/pkg/commitpkg.in

@@ -12,212 +12,193 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-pkg.sh
+m4_include(lib/util-base.sh)
+m4_include(lib/util-pkg.sh)
+m4_include(lib/base/message.sh)
+m4_include(lib/pkg/common.sh)
+m4_include(lib/pkg/git.sh)
+m4_include(lib/pkg/gitea.sh)
+m4_include(lib/pkg/repo.sh)
 
-prepare_artools
+#{{{ functions
 
-get_path(){
-    local repo="$1" pkg=trunk/PKGBUILD
-    if [[ $repo != trunk ]]; then
-        [[ -f repos/$repo-${ARCH}/PKGBUILD ]] && pkg=repos/$repo-${ARCH}/PKGBUILD
-        [[ -f repos/$repo-any/PKGBUILD ]] && pkg=repos/$repo-any/PKGBUILD
+check_rebuild(){
+    if [[ -d "$CARCH"/"${valid_names[10]}" ]] \
+    && [[ "${repo_dest}" == "${valid_names[7]}" ]]; then
+        git rm -r "$CARCH"/"${valid_names[10]}"
+        git commit -m "switch from ${valid_names[10]} to ${valid_names[7]}"
+    elif [[ -d "$CARCH"/"${valid_names[7]}" ]] \
+    && [[ "${repo_dest}" == "${valid_names[10]}" ]]; then
+        git rm -r "$CARCH"/"${valid_names[7]}"
+        git commit -m "switch from ${valid_names[7]} to ${valid_names[10]}"
     fi
-    echo $pkg
-}
-
-prepare_commit(){
-    local dest="$1"
-    [[ -d repos/$dest ]] && git rm -r repos/$dest
-    [[ ! -d repos ]] && mkdir repos
-    [[ ! -d repos/$dest ]] && mkdir repos/$dest
 }
 
 check_team(){
-    if [[ ${REPO_SRC} == "core" && ${REPO_DEST} == "extra" ]] || \
-        [[ ${REPO_SRC} == "extra" && ${REPO_DEST} == "core" ]] || \
-        [[ ${REPO_SRC} == "extra" && ${REPO_DEST} == "community" ]] || \
-        [[ ${REPO_SRC} == "community" && ${REPO_DEST} == "extra" ]] ;then
+    if [[ "${repo_src}" == "${valid_names[0]}" && "${repo_dest}" == "${valid_names[1]}" ]] || \
+        [[ "${repo_src}" == "${valid_names[1]}" && "${repo_dest}" == "${valid_names[0]}" ]] || \
+        [[ "${repo_src}" == "${valid_names[1]}" && "${repo_dest}" == "${valid_names[2]}" ]] || \
+        [[ "${repo_src}" == "${valid_names[2]}" && "${repo_dest}" == "${valid_names[1]}" ]] || \
+        [[ "${repo_src}" == "${valid_names[0]}" && "${repo_dest}" == "${valid_names[2]}" ]] || \
+        [[ "${repo_src}" == "${valid_names[2]}" && "${repo_dest}" == "${valid_names[0]}" ]]; then
 
-        local org=$(get_pkg_org "${PACKAGE}")
-        add_repo_to_team "${PACKAGE}" "$org" "${REPO_DEST}"
-        remove_repo_from_team "${PACKAGE}" "$org" "${REPO_SRC}"
+        local org gitname
+        org=$(get_pkg_org "${package}")
+        gitname=$(get_compliant_name "${package}")
+        add_team_to_repo "$gitname" "${org}" "${repo_dest}"
+        remove_team_from_repo "$gitname" "${org}" "${repo_src}"
     fi
 }
 
-commit_pkg(){
-    local artixpath=$(find_pkg "${TREE_DIR_ARTIX}" "${PACKAGE}")
+path_config() {
+    [[ "${repo_src}" != 'trunk' ]] && pkgbuild="$CARCH/${repo_src}"/PKGBUILD
 
-    if [[ -n ${artixpath} ]];then
-
-        local group=${artixpath%/*}
-
-        cd ${group}
-
-        local head=$(get_local_head)
-
-        cd ${artixpath}
-
-        local pkgbuild=$(get_path "${REPO_SRC}")
-
-        . $pkgbuild
-        [[ $arch == 'any' ]] && CARCH=any
-
-        local version=$(get_full_version)
-
-        local commit_msg=""
-
-        if ${remove};then
-            local action='remove'
-            if [[ "${REPO_SRC}" == 'trunk' ]];then
-                local pkg=${PACKAGE}
-                git rm -r trunk
-            else
-                local pkg="${PACKAGE}-$version"
-                git rm -r repos/"${REPO_SRC}-$CARCH"
-            fi
-            commit_msg="[${REPO_SRC}] '$pkg' ${action}"
-            msg "Action: %s" "$commit_msg"
-        else
-            local action='modify'
-            commit_msg="[${REPO_SRC}] '${PACKAGE}-$version' ${action}"
-            msg "Action: %s" "$commit_msg"
-            git add .
-        fi
-        git commit -m "$commit_msg"
-
-        cd ${group}
-
-        ${push} && pull_tree "${group##*/}" "$head"
-
-#         subrepo_pull "${PACKAGE}"
-        subrepo_push "${PACKAGE}"
-        subrepo_clean "${PACKAGE}"
-
-        ${push} && push_tree "${group##*/}"
-
-        git prune
-    else
-        error "Package '%s' does not exist!" "${PACKAGE}"
-    fi
+    # shellcheck disable=1090
+    . "$pkgbuild"
 }
 
-repo_commit_pkg(){
-    local artixpath=$(find_pkg "${TREE_DIR_ARTIX}" "${PACKAGE}")
-    if [[ -n ${artixpath} ]];then
+get_repo_commit_msg() {
+    printf "[%s] -> [%s] '%s' %s\n" "${repo_src}" "${repo_dest}" "${package}-$(get_full_version)" "${action}"
+}
 
-        local group=${artixpath%/*}
+get_commit_msg() {
+    printf "[%s] '%s' %s\n" "${repo_src}" "${package}-$(get_full_version)" "${action}"
+}
 
-        cd ${group}
-
-        local head=$(get_local_head)
-
-        cd ${artixpath}
-
-        local pkgbuild=$(get_path "${REPO_SRC}")
-
-        . $pkgbuild
-        [[ $arch == 'any' ]] && CARCH=any
-
-        local version=$(get_full_version)
-
-        if [[ ${REPO_SRC} == 'trunk' ]];then
-            local action='add'
-            local dest="${REPO_DEST}-$CARCH"
-
-            prepare_commit "$dest"
-
-            cp trunk/* repos/$dest/
-        else
-            local action='move'
-            local src="${REPO_SRC}-$CARCH" dest="${REPO_DEST}-$CARCH"
-
-            [[ ! -f repos/$src/PKGBUILD ]] && die "%s does not exist!" "repos/$src/PKGBUILD"
-            prepare_commit "$dest"
-
-            cp repos/$src/* repos/$dest/
-            git rm -r repos/$src
-        fi
-        local commit_msg="[${REPO_SRC}] -> [${REPO_DEST}] '${PACKAGE}-$version' ${action}"
+commit_pkg() {
+    local commit_msg pkg
+    if ${remove}; then
+        action='remove'
+        commit_msg=$(get_commit_msg)
+        msg "Action: %s" "$commit_msg"
+        if [[ "${repo_src}" == 'trunk' ]];then
+            git rm -r trunk
+        else
+            git rm -r "$CARCH/${repo_src}"
+        fi
+    else
+        action='modify'
+        commit_msg=$(get_commit_msg)
         msg "Action: %s" "$commit_msg"
-
         git add .
-        git commit -m "$commit_msg"
+    fi
+    git commit -m "$commit_msg"
+}
 
-        cd ${group}
+repo_commit_pkg() {
+    local commit_msg
 
-        ${push} && pull_tree "${group##*/}" "$head"
+    [[ -d "$CARCH/${repo_dest}" ]] && git rm -r "$CARCH/${repo_dest}"
+    [[ ! -d "$CARCH" ]] && mkdir "$CARCH"
+    [[ ! -d "$CARCH/${repo_dest}" ]] && mkdir "$CARCH/${repo_dest}"
 
-#         subrepo_pull "${PACKAGE}"
-        subrepo_push "${PACKAGE}"
-        subrepo_clean "${PACKAGE}"
+    if [[ "${repo_src}" == 'trunk' ]]; then
+        action='add'
+        commit_msg=$(get_repo_commit_msg)
+        msg "Action: %s" "$commit_msg"
+        check_rebuild
+        cp trunk/* "$CARCH/${repo_dest}"/
+    else
+        action='move'
+        [[ ! -f $pkgbuild ]] && die "%s does not exist!" "$pkgbuild"
+        commit_msg=$(get_repo_commit_msg)
+        msg "Action: %s" "$commit_msg"
+        cp "$CARCH/${repo_src}"/* "$CARCH/${repo_dest}"/
+        git rm -r "$CARCH/${repo_src}"
+    fi
+    git add .
+    git commit -m "$commit_msg"
+}
 
-        ${push} && push_tree "${group##*/}"
+run(){
+    local artixpath head tree
+    artixpath=$(find_pkg "${TREE_DIR_ARTIX}" "${package}")
+    if [[ -n ${artixpath} ]];then
+        tree=${artixpath%/*}
+        cd "$tree" || return
+        head=$(get_local_head)
+
+        cd "${artixpath}" || return
+
+        path_config
+
+        if [[ "${cmd}" == 'commitpkg' ]];then
+            commit_pkg
+        else
+            repo_commit_pkg
+        fi
+
+        cd "$tree" || return
+
+        msg "Checking (%s) (Artix)" "${tree##*/}"
+        pull_tree "${tree##*/}" "$head"
+
+        braid push "${package}"
+        braid update "${package}"
+
+        msg "Update (%s)" "${group##*/}"
+        git push origin master
 
         git prune
 
-        check_team
+        [[ "${cmd}" != 'commitpkg' ]] && check_team
     else
-        error "Package '%s' does not exist!" "${PACKAGE}"
+        die "Package '%s' does not exist!" "${package}"
     fi
 }
 
 is_valid_repo(){
-    local src="$1" cases=
-    set_arch_repos true true true
-    for r in ${ARCH_REPOS[@]};do
-        cases=${cases:-}${cases:+|}${r}
+    local _valid=trunk
+    for repo in "${valid_names[@]}"; do
+        _valid=${repo:-}${repo:+|}$_valid
     done
-    eval "case $src in
-        ${cases}|trunk) return 0 ;;
+    eval "case ${repo_src} in
+        ${_valid}) return 0 ;;
         *) return 1 ;;
     esac"
 }
 
+#}}}
+
 load_makepkg_config
 
-REPO_SRC='trunk'
-PACKAGE=''
+load_valid_names
+
+repo_src='trunk'
+package=''
 remove=false
-push=false
+
+pkgbuild=trunk/PKGBUILD
 
 cmd=${0##*/}
-REPO_DEST=${cmd%pkg}
+repo_dest=${cmd%pkg}
 
 usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo "    -s <name>          Source repository [default:${REPO_SRC}]"
-    echo '    -p <pkg>           Package name'
-    echo '    -r                 Delete from repo (commitpkg only)'
-    echo '    -u                 Push'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
-    exit $1
+    printf "Usage: %s [options]\n" "${0##*/}"
+    printf "    -s <name>          Source repository [default: %s]\n" "${repo_src}"
+    printf '    -p <pkg>           Package name\n'
+    printf '    -r                 Delete from repo (commitpkg only)\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf '\n'
+    exit "$1"
 }
 
-orig_argv=("$0" "$@")
-
-opts='p:s:urh'
+opts='p:s:rh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
-        s) REPO_SRC="$OPTARG" ;;
-        p) PACKAGE="$OPTARG" ;;
+        s) repo_src="$OPTARG" ;;
+        p) package="$OPTARG" ;;
         r) remove=true ;;
-        u) push=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 
-shift $(($OPTIND - 1))
+shift $(( OPTIND - 1 ))
 
-if $(is_valid_repo "${REPO_SRC}");then
-    if [[ "${cmd}" == 'commitpkg' ]];then
-        commit_pkg
-    else
-        repo_commit_pkg
-    fi
+if is_valid_repo;then
+    run
 else
-    error "source repository '%s' is not valid!" "${REPO_SRC}"
+    die "source repository '%s' is not valid!" "${repo_src}"
 fi

bin/pkg/comparepkg.in

@@ -12,108 +12,127 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-pkg.sh
+m4_include(lib/util-base.sh)
+m4_include(lib/util-pkg.sh)
+m4_include(lib/base/message.sh)
+m4_include(lib/pkg/repo.sh)
+m4_include(lib/pkg/table.sh)
 
-prepare_artools
 
-get_import_path(){
-    local pkg="$1" import_path=
+#{{{ upgrades, downgrades, moves
 
-    for tree in ${TREE_NAMES_ARCH[@]};do
-        [[ -d ${TREE_DIR_ARCH}/$tree/$pkg/repos ]] && import_path=${TREE_DIR_ARCH}/$tree/$pkg
-    done
-    echo $import_path
+remove_list(){
+    local name="$1"
+    [[ -f "${TREE_DIR_ARTIX}"/$name.list ]] && rm "${TREE_DIR_ARTIX}"/"$name".list
+}
+
+write_list(){
+    local line="$1" name="$2"
+    printf "%s\n" "$line" >> "${TREE_DIR_ARTIX}"/"$name".list
+}
+
+get_group() {
+    local group
+    group="${artixpath%/*}"
+    group=${group##*/}
+    printf "%s\n" "${group#*-}"
 }
 
 compare_m(){
-    local artixver="$1" artixrepo="$2" archver="$3" archrepo="$4"
-
-    local result=$(vercmp "$artixver" "$archver")
-    if [[ $artixrepo == *testing* ]] || [[ $artixrepo == *staging* ]]; then
-        if [[ "$archrepo" == "$artixrepo"  ]]; then
-            msg_row "${table}" "${archrepo%-*}" "${artixrepo%-*}" "$pkg" "$archver" "$artixver" "${group#*-}"
-        else
-            msg_row_notify "${table}" "${archrepo%-*}" "${artixrepo%-*}" "$pkg" "$archver" "$artixver" "${group#*-}"
-            if [[ -n "$archrepo" ]]; then
-                printf "%s\n" "${archrepo%-*}:${artixrepo%-*}:$pkg" >> ${TREE_DIR_ARTIX}/pkg_moves.list
-            fi
-        fi
-
-    fi
+#     if [ "$result" -eq 0 ];then
+        case "$artixrepo" in
+            *testing*|*staging*|*rebuild)
+                if [[ "${archrepo}" == "${artixrepo}" ]]; then
+                    msg_row "${table}" "${archrepo}" "${artixrepo}" "$pkg" "$archver" "$artixver" "$(get_group)"
+                elif [[ "${archrepo}" == 'staging' && "${artixrepo}" == 'rebuild' ]]; then
+                    msg_row_yellow "${table}" "${archrepo}" "${artixrepo}" "$pkg" "$archver" "$artixver" "$(get_group)"
+                else
+                    msg_row_green "${table}" "${archrepo}" "${artixrepo}" "$pkg" "$archver" "$artixver" "$(get_group)"
+                    if [[ -n "${archrepo}" ]]; then
+                        write_list "${archrepo}:${artixrepo}:$pkg" pkg_moves
+                    else
+                        write_list "@repo@:${artixrepo}:$pkg" artix
+                    fi
+                fi
+            ;;
+        esac
+#     fi
 }
 
 compare_u(){
-    local artixver="$1" artixrepo="$2" archver="$3" archrepo="$4"
-
-    local result=$(vercmp "$artixver" "$archver")
-    if [ $result -eq -1 ];then
-        msg_row_upgrade "${table}" "${archrepo%-*}" "${artixrepo%-*}" "$pkg" "$archver" "$artixver" "${group#*-}"
-        printf "%s\n" "${archrepo%-*}:$pkg" >> ${TREE_DIR_ARTIX}/pkg_upgrades.list
+    if [ "$result" -eq -1 ];then
+#         local arel=${archver##*-} brel=${artixver##*-}
+#         local reldiff
+#         reldiff=$(( $arel-${brel%.*} ))
+        msg_row_red "${table}" "${archrepo}" "${artixrepo}" "$pkg" "$archver" "$artixver" "$(get_group)"
+        write_list "${archrepo}:$pkg" pkg_upgrades
     fi
 }
 
 compare_d(){
-    local artixver="$1" artixrepo="$2" archver="$3" archrepo="$4"
-
-    local result=$(vercmp "$artixver" "$archver")
-    if [ $result -eq 1 ];then
-        if [[ -n "$archver" ]] && [[ -n "$archrepo" ]];then
-            msg_row_downgrade "${table}" "${archrepo%-*}" "${artixrepo%-*}" "$pkg" "$archver" "$artixver" "${group#*-}"
+    if [ "$result" -eq 1 ];then
+        if [[ -n "$archver" ]] && [[ -n "${archrepo}" ]];then
+            msg_row_yellow "${table}" "${archrepo}" "${artixrepo}" "$pkg" "$archver" "$artixver" "$(get_group)"
         fi
     fi
 }
 
+get_archpath(){
+    local pkg="$1" archpath
+
+    for tree in "${ARCH_TREE[@]}"; do
+        [[ -d ${TREE_DIR_ARCH}/$tree/$pkg/repos ]] && archpath=${TREE_DIR_ARCH}/$tree/$pkg
+    done
+    printf "%s\n" "$archpath"
+}
+
 pre_compare(){
-    local func="$1" pkgpath="$2"
-    local group="${pkgpath%/*}"
-    group=${group##*/}
-    local pkg=${pkgpath##*/}
-    local artixrepo=$(find_repo "$pkgpath")
-    local pkgbuild=$pkgpath/repos/$artixrepo/PKGBUILD
+    local artixpath="$1" func="$2" pkg
+    pkg=${artixpath##*/}
 
-    if [[ -f $pkgbuild ]];then
-        . $pkgbuild 2>/dev/null
-        local artixver=$(get_full_version)
+    local artixrepo archrepo pkgbuild artixver archver archpath epoch
 
-        local archpath=$(get_import_path $pkg)
-        local archrepo=$(find_repo "${archpath}")
+    artixrepo=$(find_repo "$artixpath")
+    pkgbuild=$artixpath/$CARCH/$artixrepo/PKGBUILD
+
+    if [[ -f "$pkgbuild" ]]; then
+        # shellcheck disable=1090
+        . "$pkgbuild" 2>/dev/null
+        artixver=$(get_full_version)
+        archpath=$(get_archpath "$pkg")
+        archrepo=$(find_repo "$archpath")
         pkgbuild=$archpath/repos/$archrepo/PKGBUILD
+        archrepo="${archrepo%-*}"
 
-        if [[ -f "$pkgbuild" ]];then
-            . $pkgbuild 2>/dev/null
-            local archver=$(get_full_version)
+        if [[ -f "$pkgbuild" ]]; then
+            # shellcheck disable=1090
+            . "$pkgbuild" 2>/dev/null
+            archver=$(get_full_version)
         fi
 
-        "$func" "$artixver" "$artixrepo" "$archver" "$archrepo"
+        local result
+        result=$(vercmp "$artixver" "$archver")
 
-        unset pkgver epoch pkgrel artixver archver pkgbuild archpath
+        "$func"
     fi
 }
 
 compare_upgrades(){
-    local pkgpath="${1%/*}"
-    pre_compare compare_u "$pkgpath"
+    local artixpath="${1%/*}"
+    pre_compare "$artixpath" compare_u
 }
 
 compare_downgrades(){
-    local pkgpath="${1%/*}"
-    pre_compare compare_d "$pkgpath"
+    local artixpath="${1%/*}"
+    pre_compare "$artixpath" compare_d
 }
 
 compare_move(){
-    local pkgpath="${1%/*}"
-    pre_compare compare_m "$pkgpath"
+    local artixpath="${1%/*}"
+    pre_compare "$artixpath" compare_m
 }
 
-tree_loop(){
-    local func="$1"
-    for tree in ${TREE_NAMES_ARTIX[@]};do
-        local pkgs=$(find ${TREE_DIR_ARTIX}/$tree -name trunk)
-        for package in ${pkgs[@]}; do
-            "$func" "$package"
-        done
-    done
-}
+#}}}
 
 show_compare_header(){
     msg_table_header "${table}" "Arch Repo" "Artix Repo" "Package" "Arch version" "Artix version" "Group"
@@ -121,7 +140,7 @@ show_compare_header(){
 
 show_upgrades_table(){
     show_compare_header
-    [[ -f ${TREE_DIR_ARTIX}/pkg_upgrades.list ]] && rm ${TREE_DIR_ARTIX}/pkg_upgrades.list
+    remove_list pkg_upgrades
     tree_loop compare_upgrades
 }
 
@@ -132,95 +151,15 @@ show_downgrades_table(){
 
 show_move_table(){
     show_compare_header
-    [[ -f ${TREE_DIR_ARTIX}/pkg_moves.list ]] && rm ${TREE_DIR_ARTIX}/pkg_moves.list
+    remove_list pkg_moves
+    remove_list artix
     tree_loop compare_move
 }
 
-update_db_cache(){
-    msg "Updating database cache"
-    for repo in "${searchrepos[@]}"; do
-        local cachedir=${db_cache_dir}/${LINKSDBEXT}/${ARCH}/${repo}
-        rm -rf "$cachedir"
-        mkdir -p "$cachedir"
-        msg2 "%s" "$repo"
-        curl -L -s "${REPOS_MIRROR}/${repo}/os/${ARCH}/${repo}.${LINKSDBEXT}" \
-            | bsdtar -xf - -C "$cachedir"
-    done
-    msg "Done"
-}
-
-query_db() {
-    for repo in "${searchrepos[@]}"; do
-        local prefix=
-        local db=${db_cache_dir}/${LINKSDBEXT}/${ARCH}/${repo}/
-        if [[ -d ${db} ]]; then
-            while read -rd '' pkg; do
-                read -r match
-                pkg=${pkg#${db}}
-                pkg="${pkg%/*}"
-                msg_row "${tableQ}" "${repo}" "${pkg}" "${match}"
-            done < <(grep -rZ "${library}" "${db}") | sort -u
-        fi
-    done
-}
-
-show_lib_table() {
-    ${sync} && update_db_cache
-    msg_table_header "${tableQ}" "Repo" "Package" "Library"
-    query_db
-}
-
-is_db_entry() {
-    local pkgname="$1" repo="${REPOS[$2]}"
-
-    if [[ -d ${db_cache_dir}/${LINKSDBEXT}/${ARCH}/$repo/$pkgname ]];then
-        return 0
-    fi
-    return 1
-}
-
-check_db(){
-    local pkgpath="${1%/*}"
-    local pkg=${pkgpath##*/}
-    local sarch=(any ${ARCH})
-
-    for repo in ${ARCH_REPOS[@]};do
-        for a in ${sarch[@]};do
-
-            local pkgbuild=$pkgpath/repos/$repo-$a/PKGBUILD
-
-            if [[ -f $pkgbuild ]];then
-
-                . $pkgbuild 2>/dev/null
-                local artixver=$(get_full_version)
-
-                local is_entry=false
-
-                for name in ${pkgname[@]};do
-
-                    if is_db_entry "$name-$artixver" "$repo";then
-                        is_entry=true
-                    fi
-                    if ! $is_entry;then
-                        msg_row "${tableU}" "$repo" "$name" "$artixver" "$is_entry"
-                    fi
-                done
-                unset artixver is_entry pkgbuild pkgver epoch pkgname pkgbase
-            fi
-        done
-    done
-}
-
-show_db_table(){
-    ${sync} && update_db_cache
-    msg_table_header "${tableU}" "Repo" "Package" "Version" "Database"
-    tree_loop check_db
-}
-
-db_cache_dir="${XDG_CACHE_HOME:-$USER_HOME/.cache}/artools"
-
 load_makepkg_config
 
+load_valid_names
+
 testing=true
 staging=true
 unstable=false
@@ -229,87 +168,37 @@ upgrades=false
 downgrades=false
 move=false
 
-sync=false
-check=false
-query=false
-
-readonly table="%-18s %-18s %-25s %-27s %-27s %-10s"
-readonly tableU="%-20s %-35s %-30s %-10s"
-readonly tableQ="%-20s %-45s %s"
-
-declare -A REPOS=(
-    [core]=system
-    [extra]=world
-    [community]=galaxy
-    [multilib]=lib32
-    [testing]=gremlins
-    [staging]=goblins
-    [community-testing]=galaxy-gremlins
-    [community-staging]=galaxy-goblins
-    [multilib-testing]=lib32-gremlins
-    [multilib-staging]=lib32-goblins
-    [kde-unstable]=kde-wobble
-    [gnome-unstable]=gnome-wobble
-)
-
-searchrepos=(
-    ${REPOS[kde-unstable]}
-    ${REPOS[gnome-unstable]}
-    ${REPOS[staging]}
-    ${REPOS[testing]}
-    ${REPOS[core]}
-    ${REPOS[extra]}
-    ${REPOS[community-staging]}
-    ${REPOS[community-testing]}
-    ${REPOS[community]}
-    ${REPOS[multilib-staging]}
-    ${REPOS[multilib-testing]}
-    ${REPOS[multilib]}
-)
+readonly table="%-18s %-18s %-29s %-27s %-27s %-7s"
 
 usage() {
-    echo "Usage: ${0##*/} [options] (with -q [libname])"
-    echo '    -u            Show upgrade packages'
-    echo '    -d            Show downgrade packages'
-    echo '    -m            Show packages to move'
-    echo "    -x            Don't inlcude testing packages"
-    echo "    -y            Don't inlcude staging packages"
-    echo '    -z            Include unstable kde and gnome'
-    echo "    -s            Sync repo databases"
-    echo '    -c            Check repos'
-    echo "    -q            Query repo databases for so libs"
-    echo '    -r <repo>     Repo name to query'
-    echo '                  [default: all]'
-    echo '    -h            This help'
-    echo ''
-    echo ''
-    exit $1
+    printf 'Usage: %s [options]\n' "${0##*/}"
+    printf '    -u            Show upgrade packages\n'
+    printf '    -d            Show downgrade packages\n'
+    printf '    -m            Show packages to move\n'
+    printf '    -x            Do not inlcude testing packages\n'
+    printf '    -y            Do not inlcude staging packages\n'
+    printf '    -z            Include unstable kde and gnome\n'
+    printf '    -h            This help\n'
+    printf '\n'
+    printf '\n'
+    exit "$1"
 }
 
-orig_argv=("$0" "$@")
-
-opts='r:qcsudmxyzh'
+opts='udmxyzh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
         u) upgrades=true ;;
         d) downgrades=true ;;
         m) move=true ;;
-        s) sync=true ;;
-        c) check=true ;;
-        q) query=true ;;
-        r) searchrepos=("$OPTARG") ;;
         x) testing=false ;;
         y) staging=false ;;
         z) unstable=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 
-shift $(($OPTIND - 1))
-
-library="$1"; shift
+shift $(( OPTIND - 1 ))
 
 set_arch_repos "$testing" "$staging" "$unstable"
 
@@ -318,7 +207,3 @@ ${move} && show_move_table
 ${upgrades} && show_upgrades_table
 
 ${downgrades} && show_downgrades_table
-
-${check} && show_db_table
-
-${query} && show_lib_table

bin/pkg/deploypkg.in

@@ -12,60 +12,47 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-pkg.sh
+m4_include(lib/util-base.sh)
+m4_include(lib/util-pkg.sh)
+m4_include(lib/base/message.sh)
+m4_include(lib/pkg/deploy.sh)
 
-prepare_artools
-
-get_pkgbasename(){
-    local pkg="$1"
-    local pkgbasename name ver rel arch
-
-    pkgbasename=${pkg%.pkg.tar*}
-    arch=${pkgbasename##*-}
-    pkgbasename=${pkgbasename%-"$arch"}
-
-    rel=${pkgbasename##*-}
-    pkgbasename=${pkgbasename%-"$rel"}
-
-    ver=${pkgbasename##*-}
-
-    name=${pkgbasename%-"$ver"}
-    echo $name
-}
+#{{{ deploy
 
 add(){
-    packages+=("$pkg.$ext")
-    action='add'
-    ln -sf "${pkgfile}"{,.sig} "$repo_path"/
-}
-
-remove(){
-    local to_remove=$(get_pkgbasename "$pkg.$ext")
-    packages+=("$to_remove")
-    action='remove'
-    rm "$repo_path"/"$to_remove"*pkg.tar*
-}
-
-repo_action(){
-    local packages=() action= func="$1"
-    for pkgname in ${passfiles[@]}; do
-        pkg=${pkgname%.*}
-        for ext in zst xz;do
-            if pkgfile=$(find_cached_pkgfile "$pkg.$ext");then
-                msg "Found: %s" "${pkgfile}"
-                "$func"
-            fi
-        done
-    done
-    cd $repo_path
-    if [[ -n "$action" ]]; then
-        repo-"$action" -R "${dest_repo}"."${PKGDBEXT}" "${packages[@]}"
-        ${linksdb} && links-"$action" "${dest_repo}"."${LINKSDBEXT}" "${packages[@]}"
+    if pkgfile=$(find_cached_pkgfile "${pkgname}"); then
+        msg "Found: %s" "${pkgfile}"
+        packages+=("${pkgname}")
+        action='add'
+        ln -sfv "${pkgfile}"{,.sig} "$repo_path"/
     fi
 }
 
+remove(){
+    packages+=("$(get_pkgbasename "${pkgname}")")
+    action='remove'
+    rm -v "$repo_path"/"${pkgname}"{,.sig}
+}
+
+repo_action(){
+    local packages=() action func="$1"
+    for pkgname in "${passfiles[@]}"; do
+        "$func"
+    done
+    cd "$repo_path" || return
+    if [[ -n "${action}" ]]; then
+        repo-"${action}" -R "${dest_repo}"."${pkgdb_ext}" "${packages[@]}"
+        ${linksdb} && links-"${action}" "${dest_repo}"."${linksdb_ext}" "${packages[@]}"
+    fi
+}
+
+#}}}
+
 load_makepkg_config
 
+pkgdb_ext="db.tar.${DBEXT}"
+linksdb_ext="links.tar.${DBEXT}"
+
 add_pkg=false
 rm_pkg=false
 linksdb=false
@@ -74,15 +61,15 @@ cmd=${0##*/}
 dest_repo=${cmd#*-}
 
 usage() {
-    echo "Usage: ${cmd} [options]"
-    echo '    -d <dest>          Destination repository'
-    echo '    -a                 Add package(s) to repository'
-    echo '    -r                 Remove package(s) from repository'
-    echo '    -l                 Use links db'
-    echo '    -h                 This help'
-    echo ''
-    echo ''
-    exit $1
+    printf "Usage: %s [options]\n" "${cmd}"
+    printf '    -d <dest>          Destination repository\n'
+    printf '    -a                 Add package(s) to repository\n'
+    printf '    -r                 Remove package(s) from repository\n'
+    printf '    -l                 Use links db\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf '\n'
+    exit "$1"
 }
 
 opts='arlhd:'
@@ -94,19 +81,16 @@ while getopts "${opts}" arg; do
         r) rm_pkg=true; add_pkg=false ;;
         l) linksdb=true ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 
-shift $(($OPTIND - 1))
+shift $(( OPTIND - 1 ))
 
-passfiles="$@"
+passfiles=("$@")
 
-prepare_dir "${REPOS_ROOT}"
+repo_path=${REPOS_ROOT}/${dest_repo}/os/${CARCH}
 
-repo_path=${REPOS_ROOT}/${dest_repo}/os/${ARCH}
-
-if [[ -n ${passfiles[@]} ]]; then
+if [[ -n "${passfiles[*]}" ]]; then
     if ${add_pkg}; then
         repo_action add
     fi

bin/pkg/find-libdeps.in

@@ -12,7 +12,7 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-pkg.sh
+m4_include(lib/base/message.sh)
 
 set -e
 shopt -s extglob
@@ -32,9 +32,9 @@ case $script_mode in
 esac
 
 if [[ -z $1 ]]; then
-    echo "${0##*/} [options] <package file|extracted package dir>"
-    echo "Options:"
-    echo "    --ignore-internal      ignore internal libraries"
+    printf "%s [options] <package file|extracted package dir>\n" "${0##*/}"
+    printf "Options:\n"
+    printf "    --ignore-internal      ignore internal libraries\n"
     exit 1
 fi
 
@@ -61,7 +61,7 @@ process_sofile() {
     fi
     if ! in_array "${soname}=${soversion}-${soarch}" "${soobjects[@]}"; then
         # libfoo.so=1-64
-        echo "${soname}=${soversion}-${soarch}"
+        printf "%s\n" "${soname}=${soversion}-${soarch}"
         soobjects+=("${soname}=${soversion}-${soarch}")
     fi
 }

bin/pkg/finddeps.in

@@ -12,16 +12,16 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-base.sh
+m4_include(lib/base/message.sh)
 
 match=$1
 
 if [[ -z $match ]]; then
-    echo 'Usage: finddeps <depname>'
-    echo ''
-    echo 'Find packages that depend on a given depname.'
-    echo 'Run this script from the top-level directory of your ABS tree.'
-    echo ''
+    printf 'Usage: finddeps <depname>\n'
+    printf '\n'
+    printf 'Find packages that depend on a given depname.\n'
+    printf 'Run this script from the top-level directory of your ABS tree.\n'
+    printf '\n'
     exit 1
 fi
 

bin/pkg/gitearepo.in

@@ -0,0 +1,88 @@
+#!/bin/bash
+#
+# Copyright (C) 2018-21 artoo@artixlinux.org
+# Copyright (C) 2021 Artix Linux Developers
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+m4_include(lib/util-base.sh)
+m4_include(lib/util-pkg.sh)
+m4_include(lib/base/message.sh)
+m4_include(lib/pkg/common.sh)
+
+#{{{ functions
+
+create_repo() {
+    local name="$1"
+    local org="$2"
+    local json url
+
+    json="{ \"auto_init\": true, \"name\":\"$name\", \"gitignores\":\"ArchLinuxPackages\", \"readme\": \"Default\" }"
+
+    url="${GIT_URL}/api/v1/org/$org/repos?access_token=${GIT_TOKEN}"
+
+    msg2 "Create package repo [%s] in org (%s)" "$name" "$org"
+
+    api_post "$url" -H "accept: application/json" \
+                    -H "content-type: application/json" \
+                    -d "$json"
+}
+
+transfer_repo() {
+    local name="$1"
+    local old_owner="$2"
+    local new_owner="landfill" json url
+    local json url
+
+    json="{  \"new_owner\": \"$new_owner\",  \"team_ids\": []}"
+
+    url="${GIT_URL}/api/v1/repos/$old_owner/$name/transfer?access_token=${GIT_TOKEN}"
+
+    msg2 "Transfer package repo [%s] in org (%s)" "$name" "$new_owner"
+
+    api_post "$url" -H  "accept: application/json" \
+                    -H  "Content-Type: application/json" \
+                    -d "$json"
+}
+
+#}}}
+
+usage() {
+    printf "Usage: %s [options]\n" "${0##*/}"
+    printf '    -r <repo>     Repo name\n'
+    printf '    -c            Create git repo\n'
+    printf '    -t            Transfer git repo to landfill org\n'
+    printf '    -h            This help\n'
+    printf '\n'
+    printf '\n'
+    exit "$1"
+}
+
+create=false
+transfer=false
+
+opts='r:cth'
+
+while getopts "${opts}" arg; do
+    case "${arg}" in
+        r) repo="$OPTARG" ;;
+        c) create=true ;;
+        t) transfer=true ;;
+        h|?) usage 0 ;;
+    esac
+done
+
+shift $(( OPTIND - 1 ))
+
+org=$(get_pkg_org "${repo}")
+
+${create} && create_repo "${repo}" "${org}"
+
+${transfer} && transfer_repo "${repo}" "${org}"

bin/pkg/lddd.in

@@ -12,7 +12,7 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-base.sh
+m4_include(lib/base/message.sh)
 
 ifs=$IFS
 IFS="${IFS}:"
@@ -40,7 +40,7 @@ for tree in $PATH $libdirs $extras; do
             #  Is an ELF binary.
             if (( $(ldd "$i" 2>/dev/null | grep -c 'not found') != 0 )); then
                 #  Missing lib.
-                echo "$i:" >> "$TEMPDIR/raw.txt"
+                printf "%s\n" "$i:" >> "$TEMPDIR/raw.txt"
                 ldd "$i" 2>/dev/null | grep 'not found' >> "$TEMPDIR/raw.txt"
             fi
         fi

bin/pkg/links-add.in

@@ -19,6 +19,8 @@
 #   You should have received a copy of the GNU General Public License
 #   along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
+m4_include(lib/base/message.sh)
+
 shopt -s extglob
 
 declare -r REPO_DB_NAME="links"
@@ -33,9 +35,6 @@ REPO_DB_PREFIX=
 REPO_DB_SUFFIX=
 LOCKFILE=
 CLEAN_LOCK=0
-# PREVENT_DOWNGRADE=0
-
-. @libdir@/artools/util-base.sh
 
 # ensure we have a sane umask set
 umask 0022
@@ -53,7 +52,6 @@ Multiple packages to add can be specified on the command line.\n"
         printf -- "\n"
         printf -- "Options:\n"
         printf -- "  -n, --new         only add packages that are not already in the database\n"
-#         printf -- "$(gettext "  -p, --prevent-downgrade  do not add package to database if a newer version is already present\n")"
     elif [[ $cmd == "links-remove" ]] ; then
         printf -- "Usage: links-remove [options] <path-to-db> <packagename> ...\n"
         printf -- "\n"
@@ -73,12 +71,12 @@ packages to remove can be specified on the command line.\n"
     printf -- "  -k, --key <key>   use the specified key to sign the database\n"
     printf -- "  -v, --verify      verify database's signature before update\n"
     printf -- "\n\
-See %s(8) for more details and descriptions of the available options.\n" $cmd
+See %s(8) for more details and descriptions of the available options.\n" "$cmd"
     printf "\n"
     if [[ $cmd == "links-add" ]] ; then
-        printf -- "Example:  links-add /path/to/repo.${LINKSDBEXT} pacman-5.1.3-1-x86_64.pkg.tar.xz\n"
+        printf -- "Example:  links-add /path/to/repo.links.tar.xz pacman-5.1.3-1-x86_64.pkg.tar.xz\n"
     elif [[ $cmd == "links-remove" ]] ; then
-        printf -- "Example:  links-remove /path/to/repo.${LINKSDBEXT} kernel26\n"
+        printf -- "Example:  links-remove /path/to/repo.links.tar.xz kernel26\n"
     fi
 }
 
@@ -88,8 +86,8 @@ find_pkgentry() {
 
     for pkgentry in "$tmpdir/${REPO_DB_NAME}/$pkgname"*; do
         name=${pkgentry##*/}
-        if [[ ${name%-*-*} = $pkgname ]]; then
-            echo $pkgentry
+        if [[ ${name%-*-*} = "$pkgname" ]]; then
+            printf "%s\n" "$pkgentry"
             return 0
         fi
     done
@@ -103,8 +101,8 @@ check_gpg() {
     fi
 
     if (( ! VERIFY )); then
-        if ! gpg --list-key ${GPGKEY} &>/dev/null; then
-            if [[ ! -z $GPGKEY ]]; then
+        if ! gpg --list-secret-key ${GPGKEY:+"$GPGKEY"} &>/dev/null; then
+            if [[ -n "$GPGKEY" ]]; then
                 error "The key ${GPGKEY} does not exist in your keyring."
             elif (( ! KEY )); then
                 error "There is no key in your keyring."
@@ -121,11 +119,11 @@ create_signature() {
     local ret=0
     msg "Signing database '%s'..." "${dbfile##*/.tmp.}"
 
-    local SIGNWITHKEY=""
+    local SIGNWITHKEY=()
     if [[ -n $GPGKEY ]]; then
-        SIGNWITHKEY="-u ${GPGKEY}"
+        SIGNWITHKEY=(-u "${GPGKEY}")
     fi
-    gpg --detach-sign --use-agent --no-armor ${SIGNWITHKEY} "$dbfile" &>/dev/null || ret=$?
+    gpg --detach-sign --use-agent --no-armor "${SIGNWITHKEY[@]}" "$dbfile" &>/dev/null || ret=$?
 
     if (( ! ret )); then
         msg2 "Created signature file '%s'" "${dbfile##*/.tmp.}.sig"
@@ -155,21 +153,13 @@ verify_signature() {
 }
 
 verify_repo_extension() {
-    local repofile=$1
+    local junk=()
+    if [[ $1 = *.links.tar* ]] && get_compression_command "$1" junk; then
+        return 0
+    fi
 
-    case $repofile in
-        *.links.tar.gz)  TAR_OPT="z" ;;
-        *.links.tar.bz2) TAR_OPT="j" ;;
-        *.links.tar.xz)  TAR_OPT="J" ;;
-        *.links.tar.zst) TAR_OPT="--zstd" ;;
-        *.links.tar.Z)   TAR_OPT="Z" ;;
-        *.links.tar)     TAR_OPT="" ;;
-        *) error "'%s' does not have a valid database archive extension." \
-                "$repofile"
-            exit 1 ;;
-    esac
-
-    printf '%s' "$TAR_OPT"
+    error "'%s' does not have a valid database archive extension." "$1"
+    exit 1
 }
 
 # write an entry to the pacman database
@@ -201,18 +191,6 @@ db_write_entry() {
         if (( ONLYADDNEW )); then
             return 0
         fi
-#     else
-#         pkgentry=$(find_pkgentry "$pkgname")
-#         if [[ -n $pkgentry ]]; then
-#
-#             local version=$(sed -n '/^%VERSION%$/ {n;p;q}' "$pkgentry/desc")
-#             if (( $(vercmp "$version" "$pkgver") > 0 )); then
-#                 warning "$(gettext "A newer version for '%s' is already present in database")" "$pkgname"
-#                 if (( PREVENT_DOWNGRADE )); then
-#                     return 0
-#                 fi
-#             fi
-#         fi
     fi
 
     # remove an existing entry if it exists, ignore failures
@@ -222,7 +200,7 @@ db_write_entry() {
 
     mkdir "$tmppkg"
 
-    bsdtar -xof $pkgfile -C $tmppkg --include={opt,{,usr/}{lib{,32},{s,}bin}}'/*' 2>/dev/null
+    bsdtar -xof "$pkgfile" -C "$tmppkg" --include={opt,{,usr/}{lib{,32},{s,}bin}}'/*' 2>/dev/null
 
     pushd "$tmpdir/${REPO_DB_NAME}" >/dev/null
     mkdir "$pkgname-$pkgver"
@@ -232,10 +210,11 @@ db_write_entry() {
     msg2 "Creating '%s' db entry..." "${REPO_DB_NAME}"
 
     local linksentry=$tmpdir/${REPO_DB_NAME}/$pkgname-$pkgver/${REPO_DB_NAME}
+    local files=$(find "$tmppkg" -type f ! -ipath "*/Documentation/*")
 
-    for f in $(find $tmppkg -type f); do
+    for f in ${files}; do
         readelf -d "$f" 2> /dev/null | sed -nr 's/.*Shared library: \[(.*)\].*/\1/p'
-    done | sort -u > $linksentry
+    done | sort -u > "$linksentry"
 
     popd >/dev/null
     popd >/dev/null
@@ -248,7 +227,8 @@ db_write_entry() {
 db_remove_entry() {
     local pkgname=$1
     local notfound=1
-    local pkgentry=$(find_pkgentry "$pkgname")
+    local pkgentry
+    pkgentry=$(find_pkgentry "$pkgname")
     while [[ -n $pkgentry ]]; do
         notfound=0
 
@@ -257,7 +237,8 @@ db_remove_entry() {
         rm -rf "$pkgentry"
 
         # remove entries in "links" database
-        local linksentry=$(echo "$pkgentry" | sed 's/\(.*\)\/db\//\1\/links\//')
+        local linksentry
+        linksentry=$(printf "%s\n" "$pkgentry" | sed 's/\(.*\)\/db\//\1\/links\//')
         rm -rf "$linksentry"
 
         pkgentry=$(find_pkgentry "$pkgname")
@@ -277,7 +258,7 @@ prepare_repo_db() {
     fi
 
     # check lock file
-    if ( set -o noclobber; echo "$$" > "$LOCKFILE") 2> /dev/null; then
+    if ( set -o noclobber; printf "%s\n" "$$" > "$LOCKFILE") 2> /dev/null; then
         CLEAN_LOCK=1
     else
         error "Failed to acquire lockfile: %s." "$LOCKFILE"
@@ -394,7 +375,6 @@ rotate_db() {
 }
 
 create_db() {
-    TAR_OPT=$(verify_repo_extension "$REPO_DB_FILE")
     # $LOCKFILE is already guaranteed to be absolute so this is safe
     dirname=${LOCKFILE%/*}
 
@@ -403,13 +383,13 @@ create_db() {
     tempname=$dirname/.tmp.$filename
 
     pushd "$tmpdir/${REPO_DB_NAME}" >/dev/null
-    if ( shopt -s nullglob; files=(*); (( ${#files[*]} )) ); then
-        bsdtar -c${TAR_OPT}f "$tempname" *
-    else
+    local files=(*)
+    if [[ ${files[*]} = '*' ]]; then
         # we have no packages remaining? zip up some emptyness
         warning "No packages remain, creating empty database."
-        bsdtar -c${TAR_OPT}f "$tempname" -T /dev/null
+        files=(-T /dev/null)
     fi
+    bsdtar -cf - "${files[@]}" | compress_as "$filename" > "$tempname"
     popd >/dev/null
 
     create_signature "$tempname"
@@ -419,7 +399,7 @@ trap_exit() {
     # unhook all traps to avoid race conditions
     trap '' EXIT TERM HUP QUIT INT ERR
 
-    echo
+    printf '\n'
     error "$@"
     clean_up 1
 }
@@ -433,7 +413,7 @@ clean_up() {
     [[ -d $tmpdir ]] && rm -rf "$tmpdir"
     (( CLEAN_LOCK )) && [[ -f $LOCKFILE ]] && rm -f "$LOCKFILE"
 
-    exit $exit_code
+    exit "$exit_code"
 }
 
 # PROGRAM START
@@ -473,7 +453,6 @@ while (( $# )); do
         -s|--sign) SIGN=1 ;;
         -k|--key) KEY=1 ; shift; GPGKEY=$1 ;;
         -v|--verify) VERIFY=1 ;;
-#         -p|--prevent-downgrade) PREVENT_DOWNGRADE=1 ;;
         *) args+=("$1") ;;
     esac
     shift
@@ -491,7 +470,7 @@ else
     LOCKFILE=$PWD/$REPO_DB_FILE.lck
 fi
 
-verify_repo_extension "$REPO_DB_FILE" >/dev/null
+verify_repo_extension "$REPO_DB_FILE"
 
 REPO_DB_PREFIX=${REPO_DB_FILE##*/}
 REPO_DB_PREFIX=${REPO_DB_PREFIX%.links.*}

bin/pkg/mkchrootpkg.in

@@ -12,7 +12,11 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-base.sh
+m4_include(lib/base/message.sh)
+m4_include(lib/base/chroot.sh)
+
+export BUILDTOOL=artools-pkg
+export BUILDTOOLVER=m4_artools_pkg_version
 
 shopt -s nullglob
 
@@ -31,7 +35,6 @@ clean_first=0
 run_namcap=0
 run_checkpkg=0
 temp_chroot=0
-run_nocheck=0
 
 bindmounts=()
 
@@ -41,43 +44,43 @@ copy=$USER
 src_owner=${SUDO_USER:-$USER}
 
 usage() {
-    echo "Usage: ${0##*/} [options] -r <chrootdir> [--] [makepkg args]"
-    echo ' Run this script in a PKGBUILD dir to build a package inside a'
-    echo ' clean chroot. Arguments passed to this script after the'
-    echo ' end-of-options marker (--) will be passed to makepkg.'
-    echo ''
-    echo ' The chroot dir consists of the following directories:'
-    echo ' <chrootdir>/{root, copy} but only "root" is required'
-    echo ' by default. The working copy will be created as needed'
-    echo ''
-    echo 'The chroot "root" directory must be created via the following'
-    echo 'command:'
-    echo '    mkchroot <chrootdir>/root base-devel'
-    echo ''
-    echo 'This script reads {SRC,SRCPKG,PKG,LOG}DEST, MAKEFLAGS and PACKAGER'
-    echo 'from makepkg.conf(5), if those variables are not part of the'
-    echo 'environment.'
-    echo ''
-    echo "Default makepkg args: ${default_makepkg_args[*]}"
-    echo ''
-    echo 'Flags:'
-    echo '-h         This help'
-    echo '-c         Clean the chroot before building'
-    echo '-d <dir>   Bind directory into build chroot as read-write'
-    echo '-D <dir>   Bind directory into build chroot as read-only'
-    echo '-u         Update the working copy of the chroot before building'
-    echo '           This is useful for rebuilds without dirtying the pristine'
-    echo '           chroot'
-    echo '-r <dir>   The chroot dir to use'
-    echo '-I <pkg>   Install a package into the working copy of the chroot'
-    echo '-l <copy>  The directory to use as the working copy of the chroot'
-    echo '           Useful for maintaining multiple copies'
-    echo "           Default: $copy"
-    echo '-n         Run namcap on the package'
-    echo '-C         Run checkpkg on the package'
-    echo '-N         Disable check() function'
-    echo '-T         Build in a temporary directory'
-    echo '-U         Run makepkg as a specified user'
+    printf 'Usage: %s [options] -r <chrootdir> [--] [makepkg args]\n' "${0##*/}"
+    printf ' Run this script in a PKGBUILD dir to build a package inside a\n'
+    printf ' clean chroot. Arguments passed to this script after the\n'
+    printf ' end-of-options marker (--) will be passed to makepkg.\n'
+    printf '\n'
+    printf ' The chroot dir consists of the following directories:\n'
+    printf ' <chrootdir>/{root, copy} but only "root" is required\n'
+    printf ' by default. The working copy will be created as needed\n'
+    printf '\n'
+    printf "The chroot 'root' directory must be created via the following\n"
+    printf 'command:\n'
+    printf '    mkchroot <chrootdir>/root base-devel\n'
+    printf '\n'
+    printf 'This script reads {SRC,SRCPKG,PKG,LOG}DEST, MAKEFLAGS and PACKAGER\n'
+    printf 'from makepkg.conf(5), if those variables are not part of the\n'
+    printf 'environment.\n'
+    printf '\n'
+    printf 'Default makepkg args: %s\n' "${default_makepkg_args[*]}"
+    printf '\n'
+    printf 'Flags:\n'
+    printf ' -h         This help\n'
+    printf ' -c         Clean the chroot before building\n'
+    printf ' -d <dir>   Bind directory into build chroot as read-write\n'
+    printf ' -D <dir>   Bind directory into build chroot as read-only\n'
+    printf ' -u         Update the working copy of the chroot before building\n'
+    printf '           This is useful for rebuilds without dirtying the pristine\n'
+    printf '           chroot\n'
+    printf ' -r <dir>   The chroot dir to use\n'
+    printf ' -I <pkg>   Install a package into the working copy of the chroot\n'
+    printf ' -l <copy>  The directory to use as the working copy of the chroot\n'
+    printf '            Useful for maintaining multiple copies\n'
+    printf '            Default: %s\n' "$copy"
+    printf ' -n         Run namcap on the package\n'
+    printf ' -C         Run checkpkg on the package\n'
+    printf ' -N         Disable check() function\n'
+    printf ' -T         Build in a temporary directory\n'
+    printf ' -U         Run makepkg as a specified user\n'
     exit 1
 }
 
@@ -179,7 +182,7 @@ prepare_chroot() {
         "MAKEFLAGS='${MAKEFLAGS:-}'" "PACKAGER='${PACKAGER:-}'"
     do
         grep -q "^$x" "$copydir/etc/makepkg.conf" && continue
-        echo "$x" >>"$copydir/etc/makepkg.conf"
+        printf "%s\n" "$x" >>"$copydir/etc/makepkg.conf"
     done
 
     cat > "$copydir/etc/sudoers.d/builduser-pacman" <<EOF
@@ -193,6 +196,8 @@ EOF
         printf '#!/bin/bash\n'
         declare -f _chrootbuild
         declare -p SOURCE_DATE_EPOCH 2>/dev/null || true
+        declare -p BUILDTOOL 2>/dev/null
+		declare -p BUILDTOOLVER 2>/dev/null
         printf '_chrootbuild "$@" || exit\n'
 
         if (( run_namcap )); then
@@ -218,7 +223,10 @@ _chrootbuild() {
     # use "$" in arguments to commands with "sudo -i".  ${foo} or
     # ${1} is OK, but $foo or $1 isn't.
     # https://bugzilla.sudo.ws/show_bug.cgi?id=765
-    sudo --preserve-env=SOURCE_DATE_EPOCH -iu builduser bash -c 'cd /startdir; makepkg "$@"' -bash "$@"
+    sudo --preserve-env=SOURCE_DATE_EPOCH \
+        -preserve-env=BUILDTOOL \
+		--preserve-env=BUILDTOOLVER \
+        -iu builduser bash -c 'cd /startdir; makepkg "$@"' -bash "$@"
     ret=$?
     case $ret in
         0|14)
@@ -231,7 +239,7 @@ _chrootbuild() {
 _chrootnamcap() {
     pacman -S --needed --noconfirm namcap
     for pkgfile in /startdir/PKGBUILD /pkgdest/*; do
-        echo "Checking ${pkgfile##*/}"
+        printf "Checking %s\n" "${pkgfile##*/}"
         sudo -u builduser namcap "$pkgfile" 2>&1 | tee "/logdest/${pkgfile##*/}-namcap.log"
     done
 }
@@ -241,12 +249,21 @@ download_sources() {
     chown "$makepkg_user:" "$WORKDIR"
 
     # Ensure sources are downloaded
-    sudo -u "$makepkg_user" --preserve-env=GNUPGHOME \
+    sudo -u "$makepkg_user" --preserve-env=GNUPGHOME,SSH_AUTH_SOCK \
         env SRCDEST="$SRCDEST" BUILDDIR="$WORKDIR" \
         makepkg --config="$copydir/etc/makepkg.conf" --verifysource -o "${verifysource_args[@]}" ||
         die "Could not download sources."
 }
 
+move_logfiles() {
+    local l
+    for l in "$copydir"/logdest/*; do
+        [[ $l == */logpipe.* ]] && continue
+        chown "$src_owner" "$l"
+        mv "$l" "$LOGDEST"
+    done
+}
+
 move_products() {
     local pkgfile
     for pkgfile in "$copydir"/pkgdest/*; do
@@ -259,12 +276,7 @@ move_products() {
         fi
     done
 
-    local l
-    for l in "$copydir"/logdest/*; do
-        [[ $l == */logpipe.* ]] && continue
-        chown "$src_owner" "$l"
-        mv "$l" "$LOGDEST"
-    done
+    move_logfiles
 
     for s in "$copydir"/srcpkgdest/*; do
         chown "$src_owner" "$s"
@@ -278,8 +290,6 @@ move_products() {
 }
 # }}}
 
-orig_argv=("$0" "$@")
-
 opts='hcur:I:l:nNCTb:U:'
 
 while getopts "${opts}" arg; do
@@ -291,7 +301,7 @@ while getopts "${opts}" arg; do
         I) install_pkgs+=("$OPTARG") ;;
         l) copy="$OPTARG" ;;
         n) run_namcap=1; makepkg_args+=(--install) ;;
-        N) run_nocheck=1; makepkg_args+=(--nocheck) ;;
+        N) makepkg_args+=(--nocheck) ;;
         C) run_checkpkg=1 ;;
         T) temp_chroot=1; copy+="-$$" ;;
         U) makepkg_user="$OPTARG" ;;
@@ -303,7 +313,7 @@ done
 [[ -n $makepkg_user && -z $(id -u "$makepkg_user") ]] && die 'Invalid makepkg user.'
 makepkg_user=${makepkg_user:-${SUDO_USER:-$USER}}
 
-check_root SOURCE_DATE_EPOCH,GNUPGHOME,SRCDEST,SRCPKGDEST,PKGDEST,LOGDEST,MAKEFLAGS,PACKAGER
+check_root SOURCE_DATE_EPOCH,BUILDTOOL,BUILDTOOLVER,GNUPGHOME,SRCDEST,SRCPKGDEST,PKGDEST,LOGDEST,MAKEFLAGS,PACKAGER
 
 # Canonicalize chrootdir, getting rid of trailing /
 chrootdir=$(readlink -e "$passeddir")
@@ -381,6 +391,7 @@ then
     move_products
 else
     (( ret += 1 ))
+    move_logfiles
 fi
 
 (( temp_chroot )) && delete_chroot "$copydir" "$copy"

bin/pkg/mkdepgraph.in

@@ -0,0 +1,77 @@
+#!/bin/bash
+#
+# Copyright (C) 2018-19 artoo@artixlinux.org
+# Copyright (C) 2018 Artix Linux Developers
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+mk_tree_graph(){
+    printf "%s\n" "$(pactree "${tree_args[@]}" "${package}")" \
+        | dot -T "${ext}" > "${graph_dir}/${package}.${ext}"
+}
+
+mk_rebuild_graph(){
+    local tmpfile
+    tmpfile=/tmp/rebuild.dot
+    rebuild_args+=(-d "${tmpfile}")
+    artix-rebuild-order "${packages[@]}" "${rebuild_args[@]}"
+    dot -T "${ext}" "${tmpfile}" > "${graph_dir}/rebuild.${ext}"
+    rm -f "${tmpfile}"
+}
+
+usage() {
+    printf "Usage: %s [options] <package|packages>\n" "${0##*/}"
+    printf "    -m <tree|rebuild>    default mode: [%s]\n" "$mode"
+    printf "                         rebuild mode accepts packages input\n"
+    printf "    -r                   list packages that depend on the named package (tree)\n"
+    printf "    -u                   show dependencies with no duplicates  (tree)\n"
+    printf "    -d <#>               limit the depth of recursion  (tree)\n"
+    printf "                         default: [%s]\n" "$depth"
+    printf "    -o <#>               controls at which depth to stop printing optional deps\n"
+    printf "                         default: [%s]\n" "$optdepth"
+    printf "                         (-1 for no limit)  (tree)\n"
+    printf "    -i                   only use the pkgnames provided as input (rebuild)\n"
+    printf "    -h                   display this help message\n"
+    exit "$1"
+}
+
+graph_dir=${XDG_PICTURES_DIR:-$(xdg-user-dir PICTURES)/artix}
+ext="png"
+
+mode=tree
+
+tree_args=(-gs)
+rebuild_args=()
+
+depth=0
+optdepth=-1
+
+opts=':m:d:o:iruh'
+
+while getopts "$opts" arg; do
+    case "${arg}" in
+        m) mode="$OPTARG" ;;
+        r) tree_args+=(-r) ;;
+        u) tree_args+=(-ul) ;;
+        d) depth="$OPTARG"; tree_args+=(-d "$depth") ;;
+        o) optdepth="$OPTARG"; tree_args+=(-o"$optdepth") ;;
+        i) rebuild_args+=(--no-reverse-depends) ;;
+        h|?) usage 0 ;;
+    esac
+done
+shift $(( OPTIND - 1 ))
+
+[[ -d "${graph_dir}" ]] || mkdir -p "${graph_dir}"
+
+case "$mode" in
+    tree) package=("$@"); mk_tree_graph ;;
+    rebuild) packages=("$@"); mk_rebuild_graph ;;
+    *) usage 1 ;;
+esac

bin/pkg/pkg2yaml.in

@@ -12,9 +12,30 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-base.sh
+m4_include(lib/base/message.sh)
+m4_include(lib/base/yaml.sh)
 
-write_attr(){
+#{{{ functions
+
+print_package_names() {
+    local version=$(get_full_version)
+    local architecture pkg
+    for pkg in ${pkgname[@]}; do
+        architecture=$(get_pkg_arch $pkg)
+        printf "%s/%s-%s-%s%s\n" "$PKGDEST" "$pkg" "$version" "$architecture" "$PKGEXT"
+    done
+}
+
+print_debug_package_names() {
+    local version=$(get_full_version)
+    local architecture
+    if check_option "debug" "y" && check_option "strip" "y"; then
+        architecture=$(get_pkg_arch)
+        printf "%s/%s-%s-%s-%s%s\n" "$PKGDEST" "$pkgbase" "debug" "$version" "$architecture" "$PKGEXT"
+    fi
+}
+
+srcyaml_write_attr(){
     local ident1="$1" ident2="$2" ident3="$3"
     local attrname=$4 attrvalues=("${@:5}")
 
@@ -24,47 +45,41 @@ write_attr(){
     attrvalues=("${attrvalues[@]%[[:space:]]}")
 
     case $attrname in
-        makedepends|checkdepends|depends|provides|arch)
-            Yaml+=$(write_yaml_map $ident1 "$attrname")
-            for v in ${attrvalues[@]};do
-                Yaml+=$(write_yaml_seq $ident2 "$v")
+        pkgver|pkgrel|epoch|url|install|changelog)
+            for v in "${attrvalues[@]}"; do
+                Yaml+=$(write_yaml_map "$ident3" "$attrname" "$v")
             done
         ;;
         *)
-            for v in ${attrvalues[@]};do
-                Yaml+=$(write_yaml_map $ident3 "$attrname" "$v")
+            Yaml+=$(write_yaml_map "$ident1" "$attrname")
+            for v in "${attrvalues[@]}"; do
+                Yaml+=$(write_yaml_seq "$ident2" "$v")
             done
         ;;
     esac
 }
 
-extract_info() {
+pkgbuild_extract_to_yaml() {
     local pkgname=$1 attrname=$2 isarray=$3 outvalue=
 
     if get_pkgbuild_attribute "$pkgname" "$attrname" "$isarray" 'outvalue'; then
-        [[ -z $pkgname ]] && write_attr 2 4 2 "$attrname" "${outvalue[@]}"
-        [[ -n $pkgname ]] && write_attr 4 6 2 "$attrname" "${outvalue[@]}"
+        [[ -z $pkgname ]] && srcyaml_write_attr 2 4 2 "$attrname" "${outvalue[@]}"
+        [[ -n $pkgname ]] && srcyaml_write_attr 4 6 2 "$attrname" "${outvalue[@]}"
     fi
 }
 
-write_details() {
+srcyaml_write_section_details() {
     local attr package_arch a
-    local multivalued_arch_attrs=(provides depends makedepends checkdepends)
-
-    local singlevalued=()
-    local multivalued=(arch provides depends checkdepends)
-
-    if [[ -z "$1" ]];then
-        singlevalued=(pkgver pkgrel epoch)
-        multivalued=(arch provides depends makedepends checkdepends)
-    fi
+    local multivalued_arch_attrs=(source provides conflicts depends replaces
+	                              optdepends makedepends checkdepends)
+# 	                              "${known_hash_algos[@]/%/sums}")
 
     for attr in "${singlevalued[@]}"; do
-        extract_info "$1" "$attr" 0
+        pkgbuild_extract_to_yaml "$1" "$attr" 0
     done
 
     for attr in "${multivalued[@]}"; do
-        extract_info "$1" "$attr" 1
+        pkgbuild_extract_to_yaml "$1" "$attr" 1
     done
 
     get_pkgbuild_attribute "$1" 'arch' 1 'package_arch'
@@ -73,56 +88,75 @@ write_details() {
         [[ $a = any ]] && continue
 
         for attr in "${multivalued_arch_attrs[@]}"; do
-            extract_info "$1" "${attr}_$a" 1
+            pkgbuild_extract_to_yaml "$1" "${attr}_$a" 1
         done
     done
 }
 
-write_pkg_yaml(){
-
-    Yaml=$(write_yaml_header)
+yaml_write_global() {
+    local singlevalued=(pkgver pkgrel epoch url install changelog) #pkgdesc
+    local multivalued=(arch groups license checkdepends makedepends
+                    depends provides conflicts replaces)
+                    #noextract options backup optdepends
+                    #source validpgpkeys "${known_hash_algos[@]/%/sums}")
 
     Yaml+=$(write_empty_line)
-
-    local full=$(get_full_version)
-
-    local ver=${full:-0}
-
-    pkgbase=${pkgbase:-${pkgname[0]}}
-
     Yaml+=$(write_yaml_map 0 "pkgbase")
-    Yaml+=$(write_yaml_map 2 "pkgname" "${pkgbase}")
-    ${details} && write_details ''
-    Yaml+=$(write_yaml_map 2 "fullver" "${ver}")
-
+    Yaml+=$(write_yaml_map 2 "name" "${pkgbase:-$pkgname}")
+    ${details} && srcyaml_write_section_details ''
     Yaml+=$(write_empty_line)
-
-    Yaml+=$(write_yaml_map 0 "package")
-    for pkg in "${pkgname[@]}"; do
-        Yaml+=$(write_yaml_seq_map 2 "pkgname" "$pkg")
-        ${details} && write_details "$pkg"
-    done
-
-    Yaml+=$(write_empty_line)
-
-    local pkgfile=$(print_all_package_names)
-
-    Yaml+=$(write_yaml_map 0 "pkgfile")
-    for f in ${pkgfile[@]};do
-        Yaml+=$(write_yaml_seq 2 "${f##*/}")
-    done
-
-    Yaml+=$(write_empty_line)
-
-    printf '%s' "${Yaml}"
 }
 
+yaml_write_package() {
+    local singlevalued=(url install changelog) #pkgdesc
+    local multivalued=(arch groups license checkdepends depends
+                    provides conflicts replaces) #options backup optdepends)
+
+    Yaml+=$(write_yaml_map 0 "packages")
+    for pkg in "${pkgname[@]}"; do
+        Yaml+=$(write_yaml_seq_map 2 "pkgname" "$pkg")
+        ${details} && srcyaml_write_section_details "$pkg"
+    done
+    Yaml+=$(write_empty_line)
+}
+
+yaml_write_fileinfo(){
+    local version
+    version=$(get_full_version)
+    pkgbase=${pkgbase:-$pkgname}
+    Yaml+=$(write_yaml_map 0 "version" "${version:-0}")
+    Yaml+=$(write_empty_line)
+    local pkgfile debug_pkg
+    pkgfile=$(print_package_names)
+    Yaml+=$(write_yaml_map 0 "files")
+    for f in ${pkgfile}; do
+        Yaml+=$(write_yaml_seq 2 "${f##*/}")
+    done
+    Yaml+=$(write_empty_line)
+    debug_pkg=$(print_debug_package_names)
+    Yaml+=$(write_yaml_map 0 "debug")
+    for d in ${debug_pkg}; do
+        Yaml+=$(write_yaml_seq 2 "${d##*/}")
+    done
+    Yaml+=$(write_empty_line)
+}
+
+write_srcyaml(){
+    Yaml=$(write_yaml_header)
+    yaml_write_global
+    yaml_write_package
+    yaml_write_fileinfo
+    printf '%s\n' "${Yaml}"
+}
+
+#}}}
+
 usage() {
-    echo "Usage: ${0##*/} [options]"
-    echo "    -d            Don't include details"
-    echo '    -h            This help'
-    echo ''
-    exit $1
+    printf 'Usage: %s [options]\n' "${0##*/}"
+    printf '    -d            Do not include details\n'
+    printf '    -h            This help\n'
+    printf '\n'
+    exit "$1"
 }
 
 details=true
@@ -133,17 +167,19 @@ while getopts "${opts}" arg; do
     case "${arg}" in
         d) details=false ;;
         h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
 done
 
-shift $(( $OPTIND - 1 ))
+shift $(( OPTIND - 1 ))
 
-[[ -f "$1"/PKGBUILD ]] || die "%s/PKGBUILD does not exist!" "$1"
-PACKAGE="$1"/PKGBUILD; shift
+srcpath=$(readlink -f "$1")
 
-. "$PACKAGE"
+[[ -f "$srcpath"/PKGBUILD ]] || die "%s/PKGBUILD does not exist!" "$srcpath"
+package="$srcpath"/PKGBUILD; shift
+
+# shellcheck disable=1090
+. "${package}"
 
 load_makepkg_config
 
-write_pkg_yaml
+write_srcyaml

bin/pkg/signpkg.in

@@ -12,13 +12,12 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
-. @libdir@/artools/util-pkg.sh
-
-prepare_artools
+m4_include(lib/base/message.sh)
+m4_include(lib/pkg/deploy.sh)
 
 load_makepkg_config
 
-passfiles="$@"
+passfiles=("$@")
 
 sign_pkg(){
     local file_to_sign="$1"
@@ -29,17 +28,18 @@ sign_pkg(){
     fi
 
     if [[ -n "${BUILDBOT_GPGP}" ]]; then
-        msg2 "Signing [%s]" "${file_to_sign##*/}"
+        msg "Signing [%s]" "${file_to_sign##*/}"
         gpg --batch --passphrase "${BUILDBOT_GPGP}" --detach-sign "$file_to_sign"
     else
-        msg2 "Signing [%s] with key %s" "${file_to_sign##*/}" "${GPGKEY}..."
+        msg "Signing [%s] with key %s" "${file_to_sign##*/}" "${GPGKEY}..."
         gpg --detach-sign --use-agent -u "${GPGKEY}" "$file_to_sign"
     fi
 }
 
-for pkg in ${passfiles[@]}; do
+for pkg in "${passfiles[@]}"; do
+    msg "Searching %s ..." "$pkg"
     if pkgfile=$(find_cached_pkgfile "$pkg");then
-        msg "Found: %s" "${pkgfile}"
+        msg2 "Found: %s" "${pkgfile}"
         [[ -e "${pkgfile}".sig ]] && rm "${pkgfile}".sig
         sign_pkg "${pkgfile}"
     fi

bin/pkg/tidyarch.in

@@ -0,0 +1,202 @@
+#!/bin/bash
+#
+# Copyright (C) 2018-20 artoo@artixlinux.org
+# Copyright (C) 2018 Artix Linux Developers
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+m4_include(lib/util-base.sh)
+m4_include(lib/util-pkg.sh)
+m4_include(lib/base/message.sh)
+m4_include(lib/pkg/repo.sh)
+
+git_rm() {
+    local r="$1"
+    if ! "$run_f"; then
+        printf "git rm -r %s\n" "$r"
+        printf "git commit -m 'remove %s'\n" "${r##*/}"
+    else
+        git rm -r  "$r"
+        git commit -m "remove ${r##*/}"
+    fi
+}
+
+compare_ver() {
+    local a="$1" b="$2" tree="$3" func="$4" va vb
+    # shellcheck disable=1090
+    source "$a"/PKGBUILD 2>/dev/null
+    va=$(get_full_version)
+    unset pkgver epoch pkgrel arch
+    # shellcheck disable=1090
+    source "$b"/PKGBUILD 2>/dev/null
+    vb=$(get_full_version)
+    unset pkgver epoch pkgrel arch
+    msg2 "a: %s b: %s" "$va" "$vb"
+    local ret
+    ret=$(vercmp "$va" "$vb")
+    msg2 "ret: %s" "$ret"
+    if [ "$ret" -gt 0 ]; then
+        git_rm "$b"
+    elif [ "$ret" -lt 0 ]; then
+        git_rm "$a"
+    else
+        case "$tree" in
+            "${ARCH_TREE[0]}") git_rm "$a" ;;
+            "${ARCH_TREE[1]}") git_rm "$b" ;;
+        esac
+    fi
+}
+
+check_duplicates() {
+    mapfile -t duplicates < <(find "${TREE_DIR_ARCH}" -mindepth 2 -maxdepth 2 -type d -not -path "*.git" -printf '%f\n' | sort | uniq -d)
+
+    for p in "${duplicates[@]}"; do
+        msg "%s" "$p"
+        local av bv a b
+
+        a="${TREE_DIR_ARCH}/${ARCH_TREE[0]}"
+        # shellcheck disable=1090
+        source "$a/$p"/trunk/PKGBUILD 2>/dev/null
+        av=$(get_full_version)
+
+        b="${TREE_DIR_ARCH}/${ARCH_TREE[1]}"
+        # shellcheck disable=1090
+        source "$b/$p"/trunk/PKGBUILD 2>/dev/null
+        bv=$(get_full_version)
+
+        msg2 "a: %s b: %s" "$av" "$bv"
+        ret=$(vercmp "$av" "$bv")
+        msg2 "ret: %s" "$ret"
+
+        if [ "$ret" -gt 0 ]; then
+            cd "$b"
+            msg2 "%s" "${b##*/}"
+            git_rm "$p"
+        elif [ "$ret" -lt 0 ]; then
+            cd "$a"
+            msg2 "%s" "${a##*/}"
+            git_rm "$p"
+        fi
+    done
+}
+# git config core.mergeoptions --no-edit
+check_tree() {
+    for tree in "${ARCH_TREE[@]}"; do
+        cd "${TREE_DIR_ARCH}/$tree" || exit
+
+        mapfile -t pkgs < <(find . -mindepth 2 -maxdepth 2 -type d -name repos | sort)
+
+        for p in "${pkgs[@]}"; do
+
+            mapfile -t repos < <(find "$p" -mindepth 1 -maxdepth 1 -type d -printf '%f\n' | sort)
+
+            local repos_dir=$p
+            p=${p%/*}
+            p=${p##*/}
+            local size=${#repos[@]}
+
+            if (( "$size" > 1 )); then
+                if [[ "${repos[1]}" != "${valid_names[11]}"-* ]] || [[ "${repos[1]}" != "${valid_names[12]}"-* ]]; then
+
+                    local a="$repos_dir/${repos[0]}" b="$repos_dir/${repos[1]}"
+
+                    # repo mismatches
+                    if [[ "${repos[0]}" == "${valid_names[2]}"-* ]] && [[ "${repos[1]}" == "${valid_names[1]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[2]}"-* ]] && [[ "${repos[1]}" == "${valid_names[7]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[2]}"-* ]] && [[ "${repos[1]}" == "${valid_names[4]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[0]}"-* ]] && [[ "${repos[1]}" == "${valid_names[1]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[2]}"-* ]] && [[ "${repos[1]}" == "${valid_names[0]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[3]}"-* ]] && [[ "${repos[1]}" == "${valid_names[7]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[3]}"-* ]] && [[ "${repos[1]}" == "${valid_names[4]}"-* ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+                    fi
+
+                    # same repo name but different arch
+                    if [[ "${repos[0]}" == "${valid_names[0]}"-any ]] && [[ "${repos[1]}" == "${valid_names[0]}"-"$CARCH" ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[1]}"-any ]] && [[ "${repos[1]}" == "${valid_names[1]}"-"$CARCH" ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+
+                    elif [[ "${repos[0]}" == "${valid_names[2]}"-any ]] && [[ "${repos[1]}" == "${valid_names[2]}"-"$CARCH" ]]; then
+                        msg "%s: %s" "$p" "${repos[*]}"
+                        msg2 "%s" "$tree"
+                        compare_ver "$a" "$b" "$tree"
+                    fi
+                fi
+            fi
+        done
+    done
+}
+
+usage() {
+    printf 'Usage: %s\n' "${0##*/}"
+    printf '    -f                 Apply filter\n'
+    printf '    -r                 Run removal\n'
+    printf '    -d                 Check for duplicates\n'
+    printf '    -h                 This help\n'
+    printf '\n'
+    printf '\n'
+    exit "$1"
+}
+
+load_makepkg_config
+
+load_valid_names
+
+filter=false
+dupl=false
+run_f=false
+
+opts='hrfd'
+
+while getopts ${opts} arg; do
+    case "${arg}" in
+        f) filter=true ;;
+        r) run_f=true ;;
+        d) dupl=true ;;
+        h|?) usage 0 ;;
+    esac
+done
+shift $(( OPTIND - 1 ))
+
+"$filter" && check_tree
+
+"$dupl" && check_duplicates

data/conf/artools-base.conf

@@ -6,4 +6,4 @@
 # CHROOTS_DIR=/var/lib/artools
 
 # the workspace directory
-# WORKSPACE_DIR="/home/${OWNER}/artools-workspace"
+# WORKSPACE_DIR="${USER_HOME}/artools-workspace"

data/conf/artools-iso.conf

@@ -8,14 +8,14 @@
 # the dist release; default: auto
 # ISO_VERSION=$(date +%Y%m%d)
 
-# possible values: openrc, runit, s6
+# possible values: openrc, runit, s6, suite66, dinit
 # INITSYS="openrc"
 
 # gpg key; leave empty or commented to skip img signing
 # GPG_KEY=""
 
-# set upload bandwidth limit in kB/s
-# UPLIMIT=1000
+# possible values: zstd (default), xz
+# COMPRESSION="zstd"
 
-# the server user
-# ACCOUNT=[SetUser]
+# zstd only: range 1..22
+# COMPRESSION_LEVEL=15

data/conf/artools-pkg.conf

@@ -2,47 +2,30 @@
 ################ artools-pkg ################
 #############################################
 
-# gitea user access token
+# gitea user access token for buildtree
 # GIT_TOKEN=''
 
-# HOST_TREE_ARTIX='gitea@gitea.artixlinux.org:artixlinux'
-
 # TREE_DIR_ARTIX=${WORKSPACE_DIR}/artixlinux
 
-# customize buildtree, packages and community should be enabled
-# TREE_NAMES_ARTIX=(
-#         packages
-#         community
-#         packages-kernel
-#         packages-net
-#         packages-gfx
-#         packages-openrc
-#         packages-runit
-#         packages-s6
-#         packages-media
-#         packages-xorg
-#         packages-python
-#         packages-perl
-#         packages-java
-#         packages-qt5
-#         packages-devel
-#         packages-ruby
-#         packages-gtk
-#         packages-gnome
-#         packages-cinnamon
-#         packages-lxqt
-#         packages-mate
-#         packages-kde
-#         packages-xfce
-#         packages-wm
+# customize buildtree
+# ARTIX_TREE=(
+#     main
+#     initsys
+#     desktop
+#     addons
+#     lib32
 # )
 
-# HOST_TREE_ARCH=git://git.archlinux.org/svntogit
-
 # TREE_DIR_ARCH=${WORKSPACE_DIR}/archlinux
 
-# default repos root
+# default repos root for deploypkg
 # REPOS_ROOT=${WORKSPACE_DIR}/repos
 
-# default mirror for sogrep
+# default mirror for checkrepo
 # REPOS_MIRROR="http://mirror1.artixlinux.org/repos"
+
+# enable if trouble with default github arch mirror
+# ARCH_TREE=(packages community)
+
+# enable if trouble with default github arch mirror
+# HOST_TREE_ARCH='https://git.archlinux.org/svntogit'

data/pacman/makepkg.conf

@@ -11,10 +11,10 @@
 #
 #-- The download utilities that makepkg should use to acquire sources
 #  Format: 'protocol::agent'
-DLAGENTS=('file::/usr/bin/curl -gqC - -o %o %u'
-          'ftp::/usr/bin/curl -gqfC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
-          'http::/usr/bin/curl -gqb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
-          'https::/usr/bin/curl -gqb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
+DLAGENTS=('file::/usr/bin/curl -qgC - -o %o %u'
+          'ftp::/usr/bin/curl -qgfC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
+          'http::/usr/bin/curl -qgb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
+          'https::/usr/bin/curl -qgb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
           'rsync::/usr/bin/rsync --no-motd -z %u %o'
           'scp::/usr/bin/scp -C %u %o')
 
@@ -26,6 +26,7 @@ DLAGENTS=('file::/usr/bin/curl -gqC - -o %o %u'
 #-- The package required by makepkg to download VCS sources
 #  Format: 'protocol::package'
 VCSCLIENTS=('bzr::bzr'
+            'fossil::fossil'
             'git::git'
             'hg::mercurial'
             'svn::subversion')
@@ -38,21 +39,26 @@ CARCH="x86_64"
 CHOST="x86_64-pc-linux-gnu"
 
 #-- Compiler and Linker Flags
-CPPFLAGS="-D_FORTIFY_SOURCE=2"
-CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt"
-CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt"
+#CPPFLAGS=""
+CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions \
+        -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security \
+        -fstack-clash-protection -fcf-protection"
+CXXFLAGS="$CFLAGS -Wp,-D_GLIBCXX_ASSERTIONS"
 LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now"
+LTOFLAGS="-flto=auto"
+#RUSTFLAGS="-C opt-level=2"
 #-- Make Flags: change this for DistCC/SMP systems
 #MAKEFLAGS="-j2"
 #-- Debugging flags
-DEBUG_CFLAGS="-g -fvar-tracking-assignments"
-DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
+DEBUG_CFLAGS="-g"
+DEBUG_CXXFLAGS="$DEBUG_CFLAGS"
+#DEBUG_RUSTFLAGS="-C debuginfo=2"
 
 #########################################################################
 # BUILD ENVIRONMENT
 #########################################################################
 #
-# Defaults: BUILDENV=(!distcc !color !ccache check !sign)
+# Makepkg defaults: BUILDENV=(!distcc !color !ccache check !sign)
 #  A negated environment option will do the opposite of the comments below.
 #
 #-- distcc:   Use the Distributed C/C++/ObjC compiler
@@ -75,7 +81,7 @@ BUILDENV=(!distcc color !ccache check !sign)
 #   These are default values for the options=() settings
 #########################################################################
 #
-# Default: OPTIONS=(!strip docs libtool staticlibs emptydirs !zipman !purge !debug)
+# Makepkg defaults: OPTIONS=(!strip docs libtool staticlibs emptydirs !zipman !purge !debug !lto)
 #  A negated option will do the opposite of the comments below.
 #
 #-- strip:      Strip symbols from binaries/libraries
@@ -86,11 +92,12 @@ BUILDENV=(!distcc color !ccache check !sign)
 #-- zipman:     Compress manual (man and info) pages in MAN_DIRS with gzip
 #-- purge:      Remove files specified by PURGE_TARGETS
 #-- debug:      Add debugging flags as specified in DEBUG_* variables
+#-- lto:        Add compile flags for building with link time optimization
 #
-OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !debug)
+OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !debug lto)
 
-#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
-INTEGRITY_CHECK=(md5)
+#-- File integrity checks to use. Valid: md5, sha1, sha224, sha256, sha384, sha512, b2
+INTEGRITY_CHECK=(sha256)
 #-- Options to be used when stripping binaries. See `man strip' for details.
 STRIP_BINARIES="--strip-all"
 #-- Options to be used when stripping shared libraries. See `man strip' for details.
@@ -146,4 +153,10 @@ COMPRESSLZ=(lzip -c -f)
 PKGEXT='.pkg.tar.zst'
 SRCEXT='.src.tar.gz'
 
+#########################################################################
+# OTHER
+#########################################################################
+#
+#-- Command used to run pacman as root, instead of trying sudo and su
+#PACMAN_AUTH=()
 # vim: set ft=sh ts=2 sw=2 et:

data/pacman/pacman-default.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -83,39 +85,8 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-#[testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-[extra]
-Include = /etc/pacman.d/mirrorlist-arch
-
-#[community-testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-[community]
-Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib]
-#Include = /etc/pacman.d/mirrorlist-arch

data/pacman/pacman-docker.conf

@@ -0,0 +1,99 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+NoExtract  = usr/share/help/* !usr/share/help/en*
+NoExtract  = usr/share/gtk-doc/html/* usr/share/doc/*
+NoExtract  = usr/share/locale/* usr/share/X11/locale/* usr/share/i18n/*
+NoExtract   = !*locale*/en*/* !usr/share/i18n/charmaps/UTF-8.gz !usr/share/*locale*/locale.*
+NoExtract   = !usr/share/*locales/en_?? !usr/share/*locales/i18n* !usr/share/*locales/iso*
+NoExtract   = !usr/share/*locales/trans*
+NoExtract  = usr/share/man/* usr/share/info/*
+NoExtract  = usr/share/vim/vim*/lang/*
+
+# Misc options
+#UseSyslog
+#Color
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
+VerbosePkgLists
+ParallelDownloads = 5
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Artix Linux
+# packagers with `pacman-key --populate artix`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The gremlins repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+[system]
+Include = /etc/pacman.d/mirrorlist
+
+[world]
+Include = /etc/pacman.d/mirrorlist
+
+[galaxy]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the lib32 repositories as required here.
+
+#[lib32]
+#Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs

data/pacman/pacman-gnome-wobble.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -92,54 +94,8 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-goblins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-[gnome-unstable]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[extra]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community]
-Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-staging]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib]
-#Include = /etc/pacman.d/mirrorlist-arch

data/pacman/pacman-goblins.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -89,51 +91,8 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-goblins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-[staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[extra]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community]
-Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-staging]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib]
-#Include = /etc/pacman.d/mirrorlist-arch

data/pacman/pacman-gremlins.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -83,39 +85,8 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-[testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[extra]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community]
-Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib]
-#Include = /etc/pacman.d/mirrorlist-arch

data/pacman/pacman-kde-wobble.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -92,54 +94,8 @@ Include = /etc/pacman.d/mirrorlist
 [galaxy]
 Include = /etc/pacman.d/mirrorlist
 
-# If you want to run 32 bit applications on your x86_64 system,
-# enable the lib32 repositories as required here.
-
-#[lib32-goblins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32-gremlins]
-#Include = /etc/pacman.d/mirrorlist
-
-#[lib32]
-#Include = /etc/pacman.d/mirrorlist
-
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-[kde-unstable]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[extra]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community]
-Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-staging]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib]
-#Include = /etc/pacman.d/mirrorlist-arch

data/pacman/pacman-lib32-goblins.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -106,34 +108,3 @@ Include = /etc/pacman.d/mirrorlist
 #[custom]
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-[staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[extra]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[multilib-staging]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[multilib-testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[multilib]
-Include = /etc/pacman.d/mirrorlist-arch

data/pacman/pacman-lib32-gremlins.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -97,25 +99,3 @@ Include = /etc/pacman.d/mirrorlist
 #[custom]
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-[testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[extra]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community-testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[community]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[multilib-testing]
-Include = /etc/pacman.d/mirrorlist-arch
-
-[multilib]
-Include = /etc/pacman.d/mirrorlist-arch

data/pacman/pacman-lib32.conf

@@ -31,9 +31,11 @@ Architecture = auto
 # Misc options
 #UseSyslog
 #Color
-#TotalDownload
-CheckSpace
+NoProgressBar
+# We cannot check disk space from within a chroot environment
+#CheckSpace
 VerbosePkgLists
+ParallelDownloads = 5
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.
@@ -43,7 +45,7 @@ LocalFileSigLevel = Optional
 
 # NOTE: You must run `pacman-key --init` before first using pacman; the local
 # keyring can then be populated with the keys of all official Artix Linux
-# packagers with `pacman-key --populate archlinux artix`.
+# packagers with `pacman-key --populate artix`.
 
 #
 # REPOSITORIES
@@ -97,25 +99,3 @@ Include = /etc/pacman.d/mirrorlist
 #[custom]
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
-
-#
-# ARCHLINUX
-#
-
-#[testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-[extra]
-Include = /etc/pacman.d/mirrorlist-arch
-
-#[community-testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-[community]
-Include = /etc/pacman.d/mirrorlist-arch
-
-#[multilib-testing]
-#Include = /etc/pacman.d/mirrorlist-arch
-
-[multilib]
-Include = /etc/pacman.d/mirrorlist-arch

data/valid-names.conf

@@ -0,0 +1,42 @@
+#!/hint/bash
+
+valid_names=(
+    core
+    extra
+    community
+    multilib
+    testing
+    community-testing
+    multilib-testing
+    staging
+    community-staging
+    multilib-staging
+    rebuild
+    gnome-unstable
+    kde-unstable
+)
+
+stable=(
+    "${valid_names[0]}"
+    "${valid_names[1]}"
+    "${valid_names[2]}"
+    "${valid_names[3]}"
+)
+
+gremlins=(
+    "${valid_names[4]}"
+    "${valid_names[5]}"
+    "${valid_names[6]}"
+)
+
+goblins=(
+    "${valid_names[7]}"
+    "${valid_names[8]}"
+    "${valid_names[9]}"
+    "${valid_names[10]}"
+)
+
+wobble=(
+    "${valid_names[11]}"
+    "${valid_names[12]}"
+)

initcpio/Makefile

@@ -1,23 +0,0 @@
-DIRMODE = -dm0755
-MODE =  -m0755
-
-CPIOHOOKS = \
-	$(wildcard hooks/*)
-
-CPIOINST = \
-	$(wildcard install/*)
-
-SCRIPT = \
-	$(wildcard script/*)
-
-install_initcpio:
-	install $(DIRMODE) $(DESTDIR)$(CPIODIR)/hooks
-	install $(MODE) $(CPIOHOOKS) $(DESTDIR)$(CPIODIR)/hooks
-
-	install $(DIRMODE) $(DESTDIR)$(CPIODIR)/install
-	install $(MODE) $(CPIOINST) $(DESTDIR)$(CPIODIR)/install
-	install $(MODE) $(SCRIPT) $(DESTDIR)$(CPIODIR)
-
-install: install_initcpio
-
-.PHONY: install

initcpio/hooks/artix

@@ -1,275 +0,0 @@
-# args: source, newroot, mountpoint
-_mnt_dmsnapshot() {
-    local img="${1}"
-    local mnt="${2}"
-    local img_fullname="${img##*/}";
-    local img_name="${img_fullname%%.*}"
-    local dm_snap_name="${dm_snap_prefix}_${img_name}"
-    local ro_dev ro_dev_size rw_dev
-
-    ro_dev=$(losetup --find --show --read-only "${img}")
-    echo ${ro_dev} >> ${live_root}/used_block_devices
-    ro_dev_size=$(blockdev --getsz ${ro_dev})
-
-    if [[ "${cow_persistent}" == "P" ]]; then
-        if [[ -f "${cow}/${cow_directory}/${img_name}.cow" ]]; then
-            msg ":: Found '${cow}/${cow_directory}/${img_name}.cow', using as persistent."
-        else
-            msg ":: Creating '${cow}/${cow_directory}/${img_name}.cow' as persistent."
-            truncate -s "${cow_spacesize}" "${cow}/${cow_directory}/${img_name}.cow"
-        fi
-    else
-        if [[ -f "${cow}/${cow_directory}/${img_name}.cow" ]]; then
-            msg ":: Found '${cow}/${cow_directory}/${img_name}.cow' but non-persistent requested, removing."
-            rm -f "${cow}/${cow_directory}/${img_name}.cow"
-        fi
-        msg ":: Creating '${cow}/${cow_directory}/${img_name}.cow' as non-persistent."
-        truncate -s "${cow_spacesize}" "${cow}/${cow_directory}/${img_name}.cow"
-    fi
-
-    rw_dev=$(losetup --find --show "${cow}/${cow_directory}/${img_name}.cow")
-    echo ${rw_dev} >> ${live_root}/used_block_devices
-
-    dmsetup create ${dm_snap_name} --table "0 ${ro_dev_size} snapshot ${ro_dev} ${rw_dev} ${cow_persistent} ${cow_chunksize}"
-
-    if [[ "${cow_persistent}" != "P" ]]; then
-        rm -f "${cow}/${cow_directory}/${img_name}.cow"
-    fi
-
-    _mnt_dev "/dev/mapper/${dm_snap_name}" "${mnt}" "-w" "defaults"
-    echo $(readlink -f /dev/mapper/${dm_snap_name}) >> ${live_root}/used_block_devices
-}
-
-# args: source, newroot, mountpoint
-_mnt_overlayfs() {
-    local src="${1}"
-    local newroot="${2}"
-    local mnt="${3}"
-    local work_dir="${overlay_root}/work"
-    local upper_dir="${overlay_root}/upper"
-
-    mkdir -p "${upper_dir}" "${work_dir}"
-
-    mount -t overlay overlay -o lowerdir="${src}",upperdir="${upper_dir}",workdir="${work_dir}" "${newroot}${mnt}"
-}
-
-# args: /path/to/image_file, mountpoint
-_mnt_sfs() {
-    local img="${1}"
-    local mnt="${2}"
-    local img_fullname="${img##*/}"
-    local sfs_dev
-    local oper=$( [[ -n "${ip}" && -n "${miso_http_srv}" ]] && echo "mv" || echo "cp" )
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg -n ":: Copying squashfs image to RAM..."
-        if ! "${oper}" "${img}" "${cp2ram}/${img_fullname}" ; then
-            echo "ERROR: while copy '${img}' to '${cp2ram}/${img_fullname}'"
-            launch_interactive_shell
-        fi
-        img="${cp2ram}/${img_fullname}"
-        msg "done."
-    fi
-    sfs_dev=$(losetup --find --show --read-only "${img}")
-    echo ${sfs_dev} >> ${live_root}/used_block_devices
-    _mnt_dev "${sfs_dev}" "${mnt}" "-r" "defaults"
-}
-
-# args: device, mountpoint, flags, opts
-_mnt_dev() {
-    local dev="${1}"
-    local mnt="${2}"
-    local flg="${3}"
-    local opts="${4}"
-
-    mkdir -p "${mnt}"
-
-    msg ":: Mounting '${dev}' to '${mnt}'"
-
-    while ! poll_device "${dev}" 30; do
-        echo "ERROR: '${dev}' device did not show up after 30 seconds..."
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    done
-
-    if mount -o "${opts}" "${flg}" "${dev}" "${mnt}"; then
-        msg ":: Device '${dev}' mounted successfully."
-    else
-        echo "ERROR; Failed to mount '${dev}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-}
-
-_verify_checksum() {
-    local _status
-    cd "${bootmnt}/${root}"
-    sha512sum -c $1.img.sha512 > /tmp/checksum.log 2>&1
-    _status=$?
-    cd "${OLDPWD}"
-    return ${_status}
-}
-
-_verify_signature() {
-    local _status
-    cd "${bootmnt}/${root}"
-    gpg --homedir /gpg --status-fd 1 --verify $1.img.sig 2>/dev/null | grep -qE '^\[GNUPG:\] GOODSIG'
-    _status=$?
-    cd "${OLDPWD}"
-    return ${_status}
-}
-
-run_hook() {
-    [[ -z "${copytoram_size}" ]] && copytoram_size="75%"
-    [[ -z "${root}" ]] && root="LiveOS"
-
-    [[ -z "${dm_snap_prefix}" ]] && dm_snap_prefix="artix"
-    [[ -z "${artixdevice}" ]] && artixdevice="/dev/disk/by-label/${label}"
-    [[ -z "${cow_spacesize}" ]] && cow_spacesize="256M"
-    [[ -z "${overlay_root_size}" ]] && overlay_root_size="75%"
-
-    if [[ -n "${cow_label}" ]]; then
-        cow_device="/dev/disk/by-label/${cow_label}"
-        [[ -z "${cow_persistent}" ]] && cow_persistent="P"
-    elif [[ -n "${cow_device}" ]]; then
-        [[ -z "${cow_persistent}" ]] && cow_persistent="P"
-    else
-        cow_persistent="N"
-    fi
-
-    [[ -z "${cow_flags}" ]] && cow_flags="defaults"
-    [[ -z "${cow_directory}" ]] && cow_directory="persistent_${label}"
-    [[ -z "${cow_chunksize}" ]] && cow_chunksize="8"
-    [[ -z "${overlay}" ]] && overlay=""
-
-    lower_dir=''
-    live_root="/run/artix"
-    bootmnt="${live_root}/bootmnt"
-    overlay_root="${live_root}/overlay_root"
-    cow="${live_root}/cowspace"
-    cp2ram="${live_root}/copytoram"
-
-    # set mount handler for artix
-    mount_handler="artix_mount_handler"
-}
-
-_check_sum() {
-    local fs="${1}"
-    if [[ -f "${bootmnt}/${root}/${fs}.img" ]]; then
-        if [[ -f "${bootmnt}/${root}/${fs}.img.md5" ]]; then
-            msg -n ":: Self-test requested, please wait..."
-            if _verify_checksum "${fs}"; then
-                msg "done. Checksum is OK, continue booting."
-            else
-                echo "ERROR: one or more files are corrupted"
-                echo "see /tmp/checksum.log for details"
-                launch_interactive_shell
-            fi
-        else
-            echo "ERROR: checksum=y option specified but ${root}/${fs}.img.md5 not found"
-            launch_interactive_shell
-        fi
-    fi
-}
-
-_check_sig() {
-    local fs="${1}"
-    if [[ -f "${bootmnt}/${root}/${fs}.img" ]]; then
-        if [[ -f "${bootmnt}/${root}/${fs}.img.sig" ]]; then
-            msg -n ":: Signature verification requested, please wait..."
-            if _verify_signature "${fs}"; then
-                msg "done. Signature is OK, continue booting."
-            else
-                echo "ERROR: one or more files are corrupted"
-                launch_interactive_shell
-            fi
-        else
-            echo "ERROR: verify=y option specified but ${root}/${fs}.img.sig not found"
-            launch_interactive_shell
-        fi
-    fi
-}
-
-_gen_arg() {
-    local arg="${1}"
-    echo "${lower_dir:-}${lower_dir:+:}${arg}"
-}
-
-_mount_root_overlayfs() {
-    local sfs="${1}"
-    local src="${bootmnt}/${root}"
-    local dest_sfs="${live_root}/sfs"
-    local dest_img="${live_root}/img"
-
-    if [[ -f "${src}/${sfs}.img" ]]; then
-        _mnt_sfs "${src}/${sfs}.img" "${dest_sfs}/${sfs}"
-        local find_img="${dest_sfs}/${sfs}/LiveOS/${sfs}.img"
-        if [[ -f "${find_img}" ]]; then
-            mkdir -p ${dest_img}
-            lower_dir=$(_gen_arg "${dest_img}/${sfs}")
-            _mnt_dmsnapshot "${find_img}" "${dest_img}/${sfs}"
-        else
-            lower_dir=$(_gen_arg "${dest_sfs}/${sfs}")
-        fi
-    fi
-}
-
-# This function is called normally from init script, but it can be called
-# as chain from other mount handlers.
-# args: /path/to/newroot
-artix_mount_handler() {
-    local newroot="${1}"
-
-    if ! mountpoint -q "${bootmnt}"; then
-        _mnt_dev "${artixdevice}" "${bootmnt}" "-r" "defaults"
-        if [[ "${copytoram}" != "y" ]]; then
-            echo $(readlink -f ${artixdevice}) >> ${live_root}/used_block_devices
-        fi
-    fi
-
-    if [[ "${checksum}" == "y" ]]; then
-        _check_sum "rootfs"
-        [[ -n "${overlay}" ]] && _check_sum "${overlay}"
-    fi
-
-    if [[ "${verify}" == "y" ]]; then
-        _check_sig "rootfs"
-        [[ -n "${overlay}" ]] && _check_sig "${overlay}"
-    fi
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg ":: Mounting ${cp2ram} (tmpfs) filesystem, size=${copytoram_size}"
-        mkdir -p ${cp2ram}
-        mount -t tmpfs -o "size=${copytoram_size}",mode=0755 copytoram ${cp2ram}
-    fi
-
-    if [[ -n "${cow_device}" ]]; then
-        _mnt_dev "${cow_device}" "${cow}" "-r" "${cow_flags}"
-        echo $(readlink -f ${cow_device}) >> ${live_root}/used_block_devices
-        mount -o remount,rw "${cow}"
-    else
-        msg ":: Mounting ${cow} (tmpfs) filesystem, size=${cow_spacesize}..."
-        mkdir -p ${cow}
-        mount -t tmpfs -o "size=${cow_spacesize}",mode=0755 cowspace ${cow}
-    fi
-    mkdir -p -m 0700 "${cow}/${cow_directory}"
-
-    msg -n ":: Mounting overlay root (tmpfs) filesystem, size=${overlay_root_size}..."
-    mkdir -p ${overlay_root}
-    mount -t tmpfs -o "size=${overlay_root_size}",mode=0755 overlay_root ${overlay_root}
-
-    [[ -n "${overlay}" ]] && _mount_root_overlayfs "${overlay}"
-    _mount_root_overlayfs "rootfs"
-
-    _mnt_overlayfs "${lower_dir}" "${newroot}" "/"
-
-    if [[ "${copytoram}" == "y" ]]; then
-        umount -d ${bootmnt}
-        mkdir -p ${bootmnt}/${root}
-        mount -o bind ${cp2ram} ${bootmnt}/${root}
-    fi
-}
-
-# vim:ft=sh:ts=4:sw=4:et:

initcpio/hooks/artix_loop_mnt

@@ -1,35 +0,0 @@
-# vim: set ft=sh:
-
-run_hook () {
-    [[ -n "${img_label}" ]] && img_dev="/dev/disk/by-label/${img_label}"
-    [[ -z "${img_flags}" ]] && img_flags="defaults"
-    if [[ -n "${img_dev}" && -n "${img_loop}" ]]; then
-        mount_handler="artix_loop_mount_handler"
-    fi
-}
-
-artix_loop_mount_handler () {
-    newroot="${1}"
-
-    local _dev_loop
-
-    msg ":: Setup a loop device from ${img_loop} located at device ${img_dev}"
-    _mnt_dev "${img_dev}" "${live_root}/img_dev" "-r" "${img_flags}"
-    if [[ "${copytoram}" != "y" ]]; then
-        echo $(readlink -f ${img_dev}) >> ${live_root}/used_block_devices
-    fi
-
-    if _dev_loop=$(losetup --find --show --read-only "${live_root}/img_dev/${img_loop}"); then
-        artixdevice="${_dev_loop}"
-    else
-        echo "ERROR: Setting loopback device for file '${live_root}/img_dev/${img_loop}'"
-        launch_interactive_shell
-    fi
-
-    artix_mount_handler ${newroot}
-
-    if [[ "${copytoram}" == "y" ]]; then
-        losetup -d ${_dev_loop} 2>/dev/null
-        umount ${live_root}/img_dev
-    fi
-}

initcpio/hooks/artix_pxe_common

@@ -1,72 +0,0 @@
-# vim: set ft=sh:
-
-run_hook () {
-    # Do *not* declare 'bootif_dev' local! We need it in run_latehook().
-    local i net_mac bootif_mac
-    # These variables will be parsed from /tmp/net-*.conf generated by ipconfig
-    local DEVICE
-    local IPV4ADDR IPV4BROADCAST IPV4NETMASK IPV4GATEWAY IPV4DNS0 IPV4DNS1
-    local HOSTNAME DNSDOMAIN NISDOMAIN ROOTSERVER ROOTPATH
-    local filename
-    # /tmp/net-*.conf
-
-    if [[ -n "${ip}" ]]; then
-        if [[ -n "${BOOTIF}" ]]; then
-            bootif_mac=${BOOTIF#01-}
-            bootif_mac=${bootif_mac//-/:}
-            for i in /sys/class/net/*/address; do
-                read net_mac < ${i}
-                if [[ "${bootif_mac}" == "${net_mac}" ]]; then
-                    bootif_dev=${i#/sys/class/net/}
-                    bootif_dev=${bootif_dev%/address}
-                    break
-                fi
-            done
-            if [[ "${ip}" == "dhcp" ]]; then
-               ip=":::::${bootif_dev}:dhcp"
-            else
-               ip="${ip}::${bootif_dev}"
-           fi
-        fi
-
-        # setup network and save some values
-        if ! ipconfig -t 20 "ip=${ip}"; then
-                echo "ERROR; Failed to configure network"
-                echo "   Falling back to interactive prompt"
-                echo "   You can try to fix the problem manually, log out when you are finished"
-                launch_interactive_shell
-        fi
-
-        . /tmp/net-*.conf
-
-        pxeserver=${ROOTSERVER}
-
-        # setup DNS resolver
-        if [[ "${IPV4DNS0}" != "0.0.0.0" ]]; then
-            echo "# added by artix_pxe_common hook" > /etc/resolv.conf
-            echo "nameserver ${IPV4DNS0}" >> /etc/resolv.conf
-        fi
-        if [[ "${IPV4DNS1}" != "0.0.0.0" ]]; then
-            echo "nameserver ${IPV4DNS1}" >> /etc/resolv.conf
-        fi
-        if [[ -n "${DNSDOMAIN}" ]]; then
-            echo "search ${DNSDOMAIN}" >> /etc/resolv.conf
-            echo "domain ${DNSDOMAIN}" >> /etc/resolv.conf
-        fi
-    fi
-}
-
-run_latehook () {
-    if [[ -n "${ip}" ]]; then
-        [[ -z "${copy_resolvconf}" ]] && copy_resolvconf="y"
-
-        if [[ "${copytoram}" == "y" ]]; then
-            if [[ -n "${bootif_dev}" ]]; then
-                ip addr flush dev "${bootif_dev}"
-                ip link set "${bootif_dev}" down
-            fi
-        elif [[ "${copy_resolvconf}" != "n" && -f /etc/resolv.conf ]]; then
-            cp /etc/resolv.conf /new_root/etc/resolv.conf
-        fi
-    fi
-}

initcpio/hooks/artix_pxe_http

@@ -1,63 +0,0 @@
-# vim: set ft=sh:
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_http_srv}" ]]; then
-
-        # booting with http is always copy-to-ram, so set here to make sure
-        # addresses are flushed and interface is set down
-        copytoram="y"
-
-        artix_http_srv=$(eval echo ${artix_http_srv})
-        [[ -z "${artix_http_spc}" ]] && artix_http_spc="75%"
-
-        mount_handler="artix_pxe_http_mount_handler"
-    fi
-}
-
-# Fetch a file with CURL
-#
-# $1 URL
-# $2 Destination directory inside httpspace/${root}
-_curl_get() {
-    local _url="${1}"
-    local _dst="${2}"
-
-    msg ":: Downloading '${_url}'"
-    if ! curl -L -f -o "${live_root}/httpspace/${root}${_dst}/${_url##*/}" --create-dirs "${_url}"; then
-        echo "ERROR: Downloading '${_url}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-}
-
-_get_sfs() {
-    local _sfs="${2}"
-    local _src=${artix_http_srv}${root}
-    if [[ ! -z "$( curl -s --head "${_src}/${_sfs}.img" | grep "OK" )" ]]; then
-        _curl_get "${_src}/${_sfs}.img" "/"
-
-        if [[ "${checksum}" == "y" ]]; then
-            _curl_get "${_src}/${_sfs}.md5" "/"
-        fi
-        if [[ "${verify}" == "y" ]]; then
-            _curl_get "${_src}/${_sfs}.img.sig" "/"
-        fi
-    fi
-}
-
-artix_pxe_http_mount_handler () {
-    newroot="${1}"
-
-    msg ":: Mounting ${live_root}/httpspace (tmpfs) filesystem, size='${artix_http_spc}'"
-    mkdir -p "${live_root}/httpspace"
-    mount -t tmpfs -o size="${artix_http_spc}",mode=0755 httpspace "${live_root}/httpspace"
-
-    _get_sfs "rootfs"
-    [[ -n "${overlay}" ]] && _mount_root_overlayfs "${overlay}"
-
-    mkdir -p "${bootmnt}"
-    mount -o bind ${live_root}/httpspace ${bootmnt}
-
-    artix_mount_handler ${newroot}
-}

initcpio/hooks/artix_pxe_nbd

@@ -1,47 +0,0 @@
-# vim: set ft=sh:
-
-run_earlyhook() {
-    if [[ -n "${ip}" && -n "${artix_nbd_srv}" ]]; then
-        # Module autoloading like with loop devices does not work, doing manually...
-        modprobe nbd 2> /dev/null
-    fi
-}
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_nbd_srv}" ]]; then
-
-        artix_nbd_srv=$(eval echo ${artix_nbd_srv})
-        [[ -z "${artix_nbd_name}" ]] && artix_nbd_name="artix"
-
-        mount_handler="artix_pxe_nbd_mount_handler"
-    fi
-}
-
-artix_pxe_nbd_mount_handler () {
-    newroot="${1}"
-
-    msg ":: Waiting for boot device..."
-    while ! poll_device /dev/nbd0 30; do
-        echo "ERROR: boot device didn't show up after 30 seconds..."
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    done
-
-    msg ":: Setup NBD from ${artix_nbd_srv} at /dev/nbd0"
-    if [[ "${copytoram}" != "n" ]]; then
-        nbd-client ${artix_nbd_srv} -N ${artix_nbd_name} /dev/nbd0
-        copytoram="y"
-    else
-        nbd-client ${artix_nbd_srv} -N ${artix_nbd_name} -persist /dev/nbd0
-    fi
-
-    artixdevice=/dev/nbd0
-
-    artix_mount_handler ${newroot}
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg ":: Disconnect NBD from ${artix_nbd_srv} at /dev/nbd0"
-        nbd-client -d /dev/nbd0
-    fi
-}

initcpio/hooks/artix_pxe_nfs

@@ -1,30 +0,0 @@
-# vim: set ft=sh:
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_nfs_srv}" ]]; then
-
-        artix_nfs_srv=$(eval echo ${artix_nfs_srv})
-        [[ -n "${artix_nfs_opt}" ]] && artix_nfs_opt="-o ${artix_nfs_opt}"
-
-        mount_handler="artix_nfs_mount_handler"
-    fi
-}
-
-artix_nfs_mount_handler() {
-    newroot="${1}"
-    mkdir -p "${bootmnt}"
-    msg ":: Mounting '${artix_nfs_srv}'"
-    # Do not put "${artix_nfs_opt}" nfsmount fails!
-    if ! nfsmount ${artix_nfs_opt} "${artix_nfs_srv}" "${bootmnt}"; then
-        echo "ERROR: Mounting '${artix_nfs_srv}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-
-    if [[ "${copytoram}" != "n" ]]; then
-        copytoram="y"
-    fi
-
-    artix_mount_handler ${newroot}
-}

initcpio/hooks/artix_shutdown

@@ -1,6 +0,0 @@
-run_cleanuphook() {
-    rm -rf /usr/lib/modules
-    cp -ax / /run/initramfs
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix

@@ -1,30 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "cdrom"
-    add_module "loop"
-    add_module "dm-snapshot"
-    add_module "overlay"
-
-    add_runscript
-
-    add_binary /usr/lib/udev/cdrom_id
-    add_binary blockdev
-    add_binary dmsetup
-    add_binary losetup
-    add_binary mountpoint
-    add_binary truncate
-    add_binary gpg
-    add_binary grep
-
-    add_file /usr/lib/udev/rules.d/60-cdrom_id.rules
-    add_file /usr/lib/udev/rules.d/10-dm.rules
-    add_file /usr/lib/udev/rules.d/95-dm-notify.rules
-    add_file /usr/lib/initcpio/udev/11-dm-initramfs.rules /usr/lib/udev/rules.d/11-dm-initramfs.rules
-    if [[ $ARTIX_GNUPG_FD ]]; then
-        mkdir -p "$BUILDROOT$dest"/gpg
-        gpg --homedir "$BUILDROOT$dest"/gpg --import <&$ARTIX_GNUPG_FD
-    fi
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_kms

@@ -1,16 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "radeon"
-    add_module "nouveau"
-    add_module "i915"
-    add_module "via-agp"
-    add_module "sis-agp"
-    add_module "intel-agp"
-}
-
-help() {
-    cat << HELPEOF
-Adds all common KMS drivers to the initramfs image.
-HELPEOF
-}

initcpio/install/artix_loop_mnt

@@ -1,13 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_runscript
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via loop device.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_common

@@ -1,26 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_checked_modules -f "(irda|phy|wimax|wireless|ppp_|plip|pppoe)" "/drivers/net/"
-
-    add_runscript
-
-    add_binary /usr/lib/initcpio/ipconfig /bin/ipconfig
-
-    # Add hosts support files+dns
-    add_symlink /usr/lib/libnss_files.so.2 $(readlink /usr/lib/libnss_files.so.2)
-    add_binary $(readlink -f /usr/lib/libnss_files.so.2)
-    add_symlink /usr/lib/libnss_dns.so.2 $(readlink /usr/lib/libnss_dns.so.2)
-    add_binary $(readlink -f /usr/lib/libnss_dns.so.2)
-
-    add_dir /etc
-    echo "hosts: files dns" > $BUILDROOT/etc/nsswitch.conf
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_http

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_runscript
-
-    add_binary curl
-
-    add_file $(readlink -f /etc/ssl/certs/ca-certificates.crt) /etc/ssl/certs/ca-certificates.crt
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE and HTTP.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_nbd

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "nbd"
-
-    add_runscript
-
-    add_binary nbd-client
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE and NBD.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_nfs

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "nfs"
-
-    add_runscript
-
-    add_binary /usr/lib/initcpio/nfsmount /bin/nfsmount
-}
-
-help() {
-    cat <<HELPEOF
-  This hook loads the necessary modules for boot via PXE and NFS.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_shutdown

@@ -1,20 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_binary cp
-
-    add_runscript
-
-    add_file /etc/initcpio/artix_shutdown /shutdown
-}
-
-help() {
-    cat <<HELPEOF
-This hook will create a shutdown initramfs in /run/initramfs
-that we can pivot to on shutdown in order to unmount / and
-and others mount points, dm-snapshot devices and loopback devices.
-Mostly usefull for dm-snapshot persistent.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/script/artix_shutdown

@@ -1,37 +0,0 @@
-#!/bin/ash
-
-# /oldroot depends on things inside /oldroot/run/artix...
-mkdir /oldrun
-mount -n --move /oldroot/run /oldrun
-
-# Unmount all mounts now.
-umount $(mount | awk '$3 ~/^\/oldroot/ {print $3}' | sort -r)
-
-# Remove all dm-snapshot devices.
-dmsetup remove_all
-
-# Remove all loopback devices.
-for _lup in $(grep ^/dev/loop /oldrun/artix/used_block_devices | tac); do
-    if ! losetup -d ${_lup} 2> /dev/null; then
-        umount -d ${_lup}
-    fi
-done
-
-# Unmount the space used to store *.cow.
-umount /oldrun/artix/cowspace
-
-# Unmount boot device if needed (no copytoram=y used)
-if [[ ! -d /oldrun/artix/copytoram ]]; then
-    if [[ -d /oldrun/artix/img_dev ]]; then
-        umount /oldrun/artix/img_dev
-    else
-        umount /oldrun/bootmnt
-    fi
-fi
-
-# reboot / poweroff / halt, depending on the argument passed by init
-# if something invalid is passed, we halt
-case "$1" in
-  reboot|poweroff|halt) "$1" -f ;;
-  *) halt -f;;
-esac

lib/base/chroot-version.sh

@@ -0,0 +1,3 @@
+#!/hint/bash
+
+CHROOTVERSION=0.10

lib/base/chroot.sh

@@ -1,16 +1,20 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+#!/hint/bash
+
+#{{{ chroot
+
+orig_argv=("$0" "$@")
+check_root() {
+    local keepenv="$1"
+
+    (( EUID == 0 )) && return
+    if type -P sudo >/dev/null; then
+        # shellcheck disable=2154
+        exec sudo --preserve-env="$keepenv" -- "${orig_argv[@]}"
+    else
+        # shellcheck disable=2154
+        exec su root -c "$(printf ' %q' "${orig_argv[@]}")"
+    fi
+}
 
 is_btrfs() {
     [[ -e "$1" && "$(stat -f -c %T "$1")" == btrfs ]]
@@ -20,9 +24,9 @@ is_subvolume() {
     [[ -e "$1" && "$(stat -f -c %T "$1")" == btrfs && "$(stat -c %i "$1")" == 256 ]]
 }
 
-is_same_fs() {
-    [[ "$(stat -c %d "$1")" == "$(stat -c %d "$2")" ]]
-}
+# is_same_fs() {
+#     [[ "$(stat -c %d "$1")" == "$(stat -c %d "$2")" ]]
+# }
 
 subvolume_delete_recursive() {
     local subvol
@@ -42,19 +46,4 @@ subvolume_delete_recursive() {
     return 0
 }
 
-# $1: chroot
-kill_chroot_process(){
-    local prefix="$1" flink pid name
-    for root_dir in /proc/*/root; do
-        flink=$(readlink $root_dir)
-        if [ "x$flink" != "x" ]; then
-            if [ "x${flink:0:${#prefix}}" = "x$prefix" ]; then
-                # this process is in the chroot...
-                pid=$(basename $(dirname "$root_dir"))
-                name=$(ps -p $pid -o comm=)
-                info "Killing chroot process: %s (%s)" "$name" "$pid"
-                kill -9 "$pid"
-            fi
-        fi
-    done
-}
+# }}}

lib/base/common.sh

@@ -0,0 +1,16 @@
+#!/hint/bash
+
+#{{{ common
+
+get_makepkg_conf() {
+    makepkg_conf="${DATADIR}/makepkg.conf"
+    [[ -f ${USER_CONF_DIR}/makepkg.conf ]] && makepkg_conf="${USER_CONF_DIR}/makepkg.conf"
+}
+
+get_pacman_conf() {
+    local repo="$1"
+    pacman_conf="${DATADIR}/pacman-${repo}.conf"
+    [[ -f "${USER_CONF_DIR}/pacman-${repo}.conf" ]] && pacman_conf="${USER_CONF_DIR}/pacman-${repo}.conf"
+}
+
+#}}}

lib/base/fstab.sh

@@ -1,213 +0,0 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-declare -A pseudofs_types=([anon_inodefs]=1
-                        [autofs]=1
-                        [bdev]=1
-                        [bpf]=1
-                        [binfmt_misc]=1
-                        [cgroup]=1
-                        [cgroup2]=1
-                        [configfs]=1
-                        [cpuset]=1
-                        [debugfs]=1
-                        [devfs]=1
-                        [devpts]=1
-                        [devtmpfs]=1
-                        [dlmfs]=1
-                        [efivarfs]=1
-                        [fuse.gvfs-fuse-daemon]=1
-                        [fusectl]=1
-                        [hugetlbfs]=1
-                        [mqueue]=1
-                        [nfsd]=1
-                        [none]=1
-                        [pipefs]=1
-                        [proc]=1
-                        [pstore]=1
-                        [ramfs]=1
-                        [rootfs]=1
-                        [rpc_pipefs]=1
-                        [securityfs]=1
-                        [sockfs]=1
-                        [spufs]=1
-                        [sysfs]=1
-                        [tmpfs]=1)
-
-declare -A fsck_types=([cramfs]=1
-                    [exfat]=1
-                    [ext2]=1
-                    [ext3]=1
-                    [ext4]=1
-                    [ext4dev]=1
-                    [jfs]=1
-                    [minix]=1
-                    [msdos]=1
-                    [reiserfs]=1
-                    [vfat]=1
-                    [xfs]=1)
-
-fstype_is_pseudofs() {
-    (( pseudofs_types["$1"] ))
-}
-
-fstype_has_fsck() {
-    (( fsck_types["$1"] ))
-}
-
-valid_number_of_base() {
-    local base=$1 len=${#2} i=
-
-    for (( i = 0; i < len; i++ )); do
-        { _=$(( $base#${2:i:1} )) || return 1; } 2>/dev/null
-    done
-
-    return 0
-}
-
-mangle() {
-    local i= chr= out=
-
-    local {a..f}= {A..F}=
-
-    for (( i = 0; i < ${#1}; i++ )); do
-        chr=${1:i:1}
-        case $chr in
-            [[:space:]\\])
-                printf -v chr '%03o' "'$chr"
-                out+=\\
-            ;;
-        esac
-        out+=$chr
-    done
-
-    printf '%s' "$out"
-}
-
-unmangle() {
-    local i= chr= out= len=$(( ${#1} - 4 ))
-
-    local {a..f}= {A..F}=
-
-    for (( i = 0; i < len; i++ )); do
-        chr=${1:i:1}
-        case $chr in
-            \\)
-                if valid_number_of_base 8 "${1:i+1:3}" ||
-                    valid_number_of_base 16 "${1:i+1:3}"; then
-                    printf -v chr '%b' "${1:i:4}"
-                    (( i += 3 ))
-                fi
-            ;;
-        esac
-        out+=$chr
-    done
-
-    printf '%s' "$out${1:i}"
-}
-
-dm_name_for_devnode() {
-    read dm_name <"/sys/class/block/${1#/dev/}/dm/name"
-    if [[ $dm_name ]]; then
-        printf '/dev/mapper/%s' "$dm_name"
-    else
-        # don't leave the caller hanging, just print the original name
-        # along with the failure.
-        print '%s' "$1"
-        error 'Failed to resolve device mapper name for: %s' "$1"
-    fi
-}
-
-optstring_match_option() {
-    local candidate pat patterns
-
-    IFS=, read -ra patterns <<<"$1"
-    for pat in "${patterns[@]}"; do
-        if [[ $pat = *=* ]]; then
-            # "key=val" will only ever match "key=val"
-            candidate=$2
-        else
-            # "key" will match "key", but also "key=anyval"
-            candidate=${2%%=*}
-        fi
-
-        [[ $pat = "$candidate" ]] && return 0
-    done
-
-    return 1
-}
-
-optstring_remove_option() {
-    local o options_ remove=$2 IFS=,
-
-    read -ra options_ <<<"${!1}"
-
-    for o in "${!options_[@]}"; do
-        optstring_match_option "$remove" "${options_[o]}" && unset 'options_[o]'
-    done
-
-    declare -g "$1=${options_[*]}"
-}
-
-optstring_normalize() {
-    local o options_ norm IFS=,
-
-    read -ra options_ <<<"${!1}"
-
-    # remove empty fields
-    for o in "${options_[@]}"; do
-        [[ $o ]] && norm+=("$o")
-    done
-
-    # avoid empty strings, reset to "defaults"
-    declare -g "$1=${norm[*]:-defaults}"
-}
-
-optstring_append_option() {
-    if ! optstring_has_option "$1" "$2"; then
-        declare -g "$1=${!1},$2"
-    fi
-
-    optstring_normalize "$1"
-}
-
-optstring_prepend_option() {
-    local options_=$1
-
-    if ! optstring_has_option "$1" "$2"; then
-        declare -g "$1=$2,${!1}"
-    fi
-
-    optstring_normalize "$1"
-}
-
-optstring_get_option() {
-    local opts o
-
-    IFS=, read -ra opts <<<"${!1}"
-    for o in "${opts[@]}"; do
-        if optstring_match_option "$2" "$o"; then
-            declare -g "$o"
-            return 0
-        fi
-    done
-
-    return 1
-}
-
-optstring_has_option() {
-    local "${2%%=*}"
-
-    optstring_get_option "$1" "$2"
-}

lib/base/message.sh

@@ -1,37 +1,31 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+#!/hint/bash
+
+#{{{ message
+
+#set +u +o posix
+
+# shellcheck disable=1091
+. /usr/share/makepkg/util.sh
 
-# export LC_MESSAGES=C
 export LANG=C
 
+shopt -s extglob
+
 if [[ -t 2 && "$TERM" != dumb ]]; then
     colorize
 else
+    # shellcheck disable=2034
     declare -gr ALL_OFF='' BOLD='' BLUE='' GREEN='' RED='' YELLOW=''
 fi
 
-info() {
-    local mesg=$1; shift
-    printf "${YELLOW} -->${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
-}
-
 stat_busy() {
     local mesg=$1; shift
+    # shellcheck disable=2059
     printf "${GREEN}==>${ALL_OFF}${BOLD} ${mesg}...${ALL_OFF}" "$@" >&2
 }
 
 stat_done() {
+    # shellcheck disable=2059
     printf "${BOLD}done${ALL_OFF}\n" >&2
 }
 
@@ -45,9 +39,9 @@ lock() {
         mkdir -p -- "$(dirname -- "$2")"
         eval "exec $1>"'"$2"'
     fi
-    if ! flock -n $1; then
+    if ! flock -n "$1"; then
         stat_busy "$3"
-        flock $1
+        flock "$1"
         stat_done
     fi
 }
@@ -57,9 +51,9 @@ slock() {
         mkdir -p -- "$(dirname -- "$2")"
         eval "exec $1>"'"$2"'
     fi
-    if ! flock -sn $1; then
+    if ! flock -sn "$1"; then
         stat_busy "$3"
-        flock -s $1
+        flock -s "$1"
         stat_done
     fi
 }
@@ -100,28 +94,4 @@ die() {
     cleanup 255
 }
 
-msg_table_header(){
-    local mesg=$1; shift
-    printf "${BLUE} ${mesg} ${ALL_OFF}\n" "$@" >&2
-}
-
-msg_row_downgrade(){
-    local mesg=$1; shift
-    printf "${YELLOW} ${mesg}${ALL_OFF}\n" "$@" >&2
-}
-
-msg_row_notify(){
-    local mesg=$1; shift
-    printf "${GREEN} ${mesg}${ALL_OFF}\n" "$@" >&2
-}
-
-msg_row(){
-    local mesg=$1; shift
-#     printf "${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
-    printf "${WHITE} ${mesg}${ALL_OFF}\n" "$@" >&2
-}
-
-msg_row_upgrade(){
-    local mesg=$1; shift
-    printf "${RED} ${mesg} ${ALL_OFF}\n" "$@" >&2
-}
+#}}}

lib/base/mount.sh

@@ -1,54 +1,19 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+#!/hint/bash
+
+#{{{ mount
 
 ignore_error() {
     "$@" 2>/dev/null
     return 0
 }
 
-parse_fstab(){
-    echo $(perl -ane 'printf("%s:%s\n", @F[0,1]) if $F[0] =~ m#^UUID=#;' $1/etc/fstab)
-# 	perl -ane 'printf("%s:%s\n", @F[0,1]) if $F[0] =~ m#^/dev#;' $1/etc/fstab
-# 	perl -ane 'printf("%s:%s\n", @F[0,1]) if $F[0] =~ m#^LABEL=#;' $1/etc/fstab
-}
-
-detect(){
-    local detected="$(os-prober | tr ' ' '_' | paste -s -d ' ')"
-    echo ${detected}
-}
-
-# $1: os-prober array
-get_os_name(){
-    local str=$1
-    str="${str#*:}"
-    str="${str#*:}"
-    str="${str%:*}"
-    echo "$str"
-}
-
-chroot_part_mount() {
-    info "mount: [%s]" "$2"
-    mount "$@" && CHROOT_ACTIVE_PART_MOUNTS=("$2" "${CHROOT_ACTIVE_PART_MOUNTS[@]}")
-}
-
 trap_setup(){
     [[ $(trap -p EXIT) ]] && die 'Error! Attempting to overwrite existing EXIT trap'
     trap "$1" EXIT
 }
 
 chroot_mount() {
-#     info "mount: [%s]" "$2"
+#     msg2 "mount: [%s]" "$2"
     mount "$@" && CHROOT_ACTIVE_MOUNTS=("$2" "${CHROOT_ACTIVE_MOUNTS[@]}")
 }
 
@@ -88,8 +53,8 @@ chroot_mount_conditional() {
 }
 
 chroot_setup(){
-    local mnt="$1" os="$2" run_args='-t tmpfs -o nosuid,nodev,mode=0755'
-    $os && run_args='--bind'
+    local mnt="$1" os="$2" args='-t tmpfs -o nosuid,nodev,mode=0755'
+    $os && args='--bind'
     chroot_mount_conditional "! mountpoint -q '$mnt'" "$mnt" "$mnt" --bind &&
     chroot_mount proc "$mnt/proc" -t proc -o nosuid,noexec,nodev &&
     chroot_mount sys "$mnt/sys" -t sysfs -o nosuid,noexec,nodev,ro &&
@@ -98,33 +63,10 @@ chroot_setup(){
     chroot_mount udev "$mnt/dev" -t devtmpfs -o mode=0755,nosuid &&
     chroot_mount devpts "$mnt/dev/pts" -t devpts -o mode=0620,gid=5,nosuid,noexec &&
     chroot_mount shm "$mnt/dev/shm" -t tmpfs -o mode=1777,nosuid,nodev &&
-    chroot_mount /run "$mnt/run" ${run_args} &&
+    chroot_mount /run "$mnt/run" ${args} &&
     chroot_mount tmp "$mnt/tmp" -t tmpfs -o mode=1777,strictatime,nodev,nosuid
 }
 
-mount_os(){
-    CHROOT_ACTIVE_PART_MOUNTS=()
-    CHROOT_ACTIVE_MOUNTS=()
-
-    trap_setup chroot_part_umount
-
-    chroot_part_mount "$2" "$1"
-
-    local mounts=$(parse_fstab "$1")
-
-    for entry in ${mounts[@]}; do
-        entry=${entry//UUID=}
-        local dev=${entry%:*} mp=${entry#*:}
-        case "${entry#*:}" in
-            '/'|'swap'|'none') continue ;;
-            *) chroot_part_mount "/dev/disk/by-uuid/${dev}" "$1${mp}" ;;
-        esac
-    done
-
-    chroot_setup "$1" true
-    chroot_add_resolv_conf "$1"
-}
-
 chroot_api_mount() {
     CHROOT_ACTIVE_MOUNTS=()
     trap_setup chroot_api_umount
@@ -133,16 +75,10 @@ chroot_api_mount() {
 
 chroot_api_umount() {
     if (( ${#CHROOT_ACTIVE_MOUNTS[@]} )); then
-#         info "umount: [%s]" "${CHROOT_ACTIVE_MOUNTS[@]}"
+#         msg2 "umount: [%s]" "${CHROOT_ACTIVE_MOUNTS[@]}"
         umount "${CHROOT_ACTIVE_MOUNTS[@]}"
     fi
     unset CHROOT_ACTIVE_MOUNTS
 }
 
-chroot_part_umount() {
-    chroot_api_umount
-    info "umount: [%s]" "${CHROOT_ACTIVE_PART_MOUNTS[@]}"
-    umount "${CHROOT_ACTIVE_PART_MOUNTS[@]}"
-    unset CHROOT_ACTIVE_PART_MOUNTS
-}
-
+#}}}

lib/base/util.sh

@@ -1,47 +0,0 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-get_timer(){
-    echo $(date +%s)
-}
-
-# $1: start timer
-elapsed_time(){
-    echo $(echo $1 $(get_timer) | awk '{ printf "%0.2f",($2-$1)/60 }')
-}
-
-show_elapsed_time(){
-    info "Time %s: %s minutes" "$1" "$(elapsed_time $2)"
-}
-
-prepare_dir(){
-    [[ ! -d $1 ]] && mkdir -p $1
-}
-
-get_osname(){
-    . /usr/lib/os-release
-    echo "${NAME}"
-}
-
-# orig_argv=("$0" "$@")
-check_root() {
-    local keepenv=$1
-
-    (( EUID == 0 )) && return
-    if type -P sudo >/dev/null; then
-        exec sudo --preserve-env=$keepenv -- "${orig_argv[@]}"
-    else
-        exec su root -c "$(printf ' %q' "${orig_argv[@]}")"
-    fi
-}

lib/base/yaml.sh

@@ -1,23 +1,13 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+#!/hint/bash
+
+#{{{ yaml
 
 write_yaml_header(){
-    printf '%s' '---'
+    printf '%s\n' '---'
 }
 
 write_empty_line(){
-    printf '\n%s\n' ' '
+    printf '\n'
 }
 
 write_yaml_map(){
@@ -34,3 +24,5 @@ write_yaml_seq_map(){
     local ident="$1" key="$2" val="$3"
     printf "\n%${ident}s- %s: %s\n" '' "$key" "$val"
 }
+
+#}}}

lib/iso/calamares.sh

@@ -0,0 +1,55 @@
+#!/hint/bash
+
+#{{{ calamares
+
+write_services_conf(){
+    local key1="$1" val1="$2" key2="$3" val2="$4"
+    local yaml
+    yaml=$(write_yaml_header)
+    yaml+=$(write_yaml_map 0 "$key1" "$val1")
+    yaml+=$(write_yaml_map 0 "$key2" "$val2")
+    yaml+=$(write_yaml_map 0 'services')
+    for svc in "${SERVICES[@]}"; do
+        yaml+=$(write_yaml_seq 2 "$svc")
+    done
+    yaml+=$(write_empty_line)
+    printf '%s\n' "${yaml}"
+}
+
+write_services_openrc_conf(){
+    local conf="$1"/services-openrc.conf
+    write_services_conf 'initdDir' '/etc/init.d' 'runlevelsDir' '/etc/runlevels' > "$conf"
+}
+
+write_services_runit_conf(){
+    local conf="$1"/services-runit.conf
+    write_services_conf 'svDir' '/etc/runit/sv' 'runsvDir' '/etc/runit/runsvdir' > "$conf"
+}
+
+write_services_s6_conf(){
+    local conf="$1"/services-s6.conf
+    write_services_conf 'svDir' '/etc/s6/sv' 'dbDir' '/etc/s6/rc/compiled' > "$conf"
+    printf '%s\n' "defaultBundle: default" >> "$conf"
+}
+
+write_services_suite66_conf(){
+    local conf="$1"/services-suite66.conf
+    write_services_conf 'svDir' '/etc/66/service' 'runsvDir' '/var/lib/66/system' > "$conf"
+}
+
+write_services_dinit_conf(){
+    local conf="$1"/services-dinit.conf
+    write_services_conf 'initdDir' '/etc/dinit.d' 'runsvDir' '/etc/dinit.d/boot.d' > "$conf"
+}
+
+configure_calamares(){
+    local mods="$1/etc/calamares/modules"
+    if [[ -d "$mods" ]];then
+        msg2 "Configuring: Calamares"
+        write_services_"${INITSYS}"_conf "$mods"
+        sed -e "s|services-openrc|services-${INITSYS}|" \
+            -i "$1"/etc/calamares/settings.conf
+    fi
+}
+
+#}}}

lib/iso/chrootcfg.sh

@@ -1,226 +0,0 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-add_svc_openrc(){
-    local mnt="$1" names="$2" rlvl="${3:-default}"
-    for svc in $names; do
-        if [[ -f $mnt/etc/init.d/$svc ]];then
-            msg2 "Setting %s ..." "$svc"
-            [[ $svc == "xdm" ]] && set_xdm "$mnt"
-            chroot $mnt rc-update add $svc $rlvl &>/dev/null
-        fi
-    done
-}
-
-add_svc_runit(){
-    local mnt="$1" names="$2" rlvl="${3:-default}"
-    for svc in $names; do
-        if [[ -d $mnt/etc/runit/sv/$svc ]]; then
-            msg2 "Setting %s ..." "$svc"
-            chroot $mnt ln -s /etc/runit/sv/$svc /etc/runit/runsvdir/$rlvl &>/dev/null
-        fi
-    done
-}
-
-add_svc_s6(){
-    local mnt="$1" names="$2" valid="" rlvl="${3:-default}"
-    for svc in $names; do
-        error=false
-        chroot $mnt s6-rc-db -c /etc/s6/rc/compiled type $svc &> /dev/null || error=true
-        if [ $? == 0 ] && [[ $error == false ]]; then
-            msg2 "Setting %s ..." "$svc"
-            valid=${valid:-}${valid:+' '}${svc}
-        fi
-    done
-    chroot $mnt s6-rc-bundle -c /etc/s6/rc/compiled add $rlvl $valid
-
-    # rebuild s6-linux-init binaries
-    chroot $mnt rm -r /etc/s6/current
-    chroot $mnt s6-linux-init-maker -1 -N -f /etc/s6/skel -G "/usr/bin/agetty -L -8 tty1 115200" -c /etc/s6/current /etc/s6/current
-    chroot $mnt mv /etc/s6/current/bin/init /etc/s6/current/bin/s6-init
-    chroot $mnt cp -a /etc/s6/current/bin /usr
-}
-
-set_xdm(){
-    if [[ -f $1/etc/conf.d/xdm ]];then
-        local conf='DISPLAYMANAGER="'${DISPLAYMANAGER}'"'
-        sed -i -e "s|^.*DISPLAYMANAGER=.*|${conf}|" $1/etc/conf.d/xdm
-    fi
-}
-
-configure_hosts(){
-    sed -e "s|localhost.localdomain|localhost.localdomain ${HOST_NAME}|" -i $1/etc/hosts
-}
-
-configure_logind(){
-    local conf=$1/etc/$2/logind.conf
-    if [[ -e $conf ]];then
-        msg2 "Configuring logind ..."
-        sed -i 's/#\(HandleSuspendKey=\)suspend/\1ignore/' "$conf"
-        sed -i 's/#\(HandleLidSwitch=\)suspend/\1ignore/' "$conf"
-        sed -i 's/#\(HandleHibernateKey=\)hibernate/\1ignore/' "$conf"
-    fi
-}
-
-configure_services(){
-    local mnt="$1"
-    info "Configuring [%s] services" "${INITSYS}"
-    add_svc_${INITSYS} "$mnt" "${SERVICES[*]} ${SERVICES_LIVE[*]}"
-    info "Done configuring [%s] services" "${INITSYS}"
-}
-
-configure_system(){
-    local mnt="$1"
-    configure_logind "$mnt" "elogind"
-    echo ${HOST_NAME} > $mnt/etc/hostname
-}
-
-write_users_conf(){
-    local yaml=$(write_yaml_header)
-    yaml+=$(write_yaml_map 0 'defaultGroups')
-    local IFS=','
-    for g in ${ADDGROUPS[@]};do
-        yaml+=$(write_yaml_seq 2 "$g")
-    done
-    unset IFS
-    yaml+=$(write_yaml_map 0 'autologinGroup' 'autologin')
-    yaml+=$(write_yaml_map 0 'doAutologin' 'false')
-    yaml+=$(write_yaml_map 0 'sudoersGroup' 'wheel')
-    yaml+=$(write_yaml_map 0 'setRootPassword' 'true')
-    yaml+=$(write_yaml_map 0 'availableShells' '/bin/bash, /bin/zsh')
-#     yaml+=$(write_yaml_map 0 'passwordRequirements')
-#     yaml+=$(write_yaml_map 2 'minLength' '-1')
-#     yaml+=$(write_yaml_map 2 'maxLength' '-1')
-#     yaml+=$(write_yaml_map 2 'libpwquality')
-#     yaml+=$(write_yaml_seq 4 "minlen=8")
-#     yaml+=$(write_yaml_seq 4 "minclass=80")
-    yaml+=$(write_empty_line)
-    printf '%s' "${yaml}"
-}
-
-write_services_conf(){
-    local key1="$1" val1="$2" key2="$3" val2="$4"
-    local yaml=$(write_yaml_header)
-    yaml+=$(write_yaml_map 0 "$key1" "$val1")
-    yaml+=$(write_yaml_map 0 "$key2" "$val2")
-    yaml+=$(write_yaml_map 0 'services')
-    for svc in ${SERVICES[@]};do
-        yaml+=$(write_yaml_seq 2 "$svc")
-    done
-    yaml+=$(write_empty_line)
-    printf '%s' "${yaml}"
-}
-
-write_services_openrc_conf(){
-    local conf="$1"/services-openrc.conf
-    write_services_conf 'initdDir' '/etc/init.d' 'runlevelsDir' '/etc/runlevels' > "$conf"
-}
-
-write_services_runit_conf(){
-    local conf="$1"/services-runit.conf
-    write_services_conf 'svDir' '/etc/runit/sv' 'runsvDir' '/etc/runit/runsvdir' > "$conf"
-}
-
-write_services_s6_conf(){
-    local conf="$1"/services-s6.conf
-    write_services_conf 'svDir' '/etc/s6/sv' 'dbDir' '/etc/s6/rc/compiled' > "$conf"
-}
-
-write_postcfg(){
-    local yaml=$(write_yaml_header)
-    yaml+=$(write_yaml_map 0 'keyrings')
-    for k in archlinux artix;do
-        yaml+=$(write_yaml_seq 2 "$k")
-    done
-    yaml+=$(write_empty_line)
-    printf '%s' "${yaml}"
-}
-
-write_unpackfs() {
-    local yaml=$(write_yaml_header)
-    yaml+=$(write_yaml_map 0 'unpack')
-#     if ${persist}; then
-#         yaml+=$(write_yaml_seq_map 2 'source' '"/run/artix/bootmnt/LiveOS/rootfs.img"')
-#         yaml+=$(write_yaml_map 4 'sourcefs' '"ext4"')
-#     else
-    yaml+=$(write_yaml_seq_map 2 'source' '"/run/artix/bootmnt/LiveOS/rootfs.img"')
-    yaml+=$(write_yaml_map 4 'sourcefs' '"squashfs"')
-#     fi
-    yaml+=$(write_yaml_map 4 'destination' '""')
-    yaml+=$(write_empty_line)
-    printf '%s' "${yaml}"
-}
-
-configure_calamares(){
-    local mods="$1/etc/calamares/modules"
-    if [[ -d "$mods" ]];then
-        msg2 "Configuring Calamares"
-        write_users_conf > "$mods"/users.conf
-        write_services_"${INITSYS}"_conf "$mods"
-        write_postcfg > "$mods"/postcfg.conf
-        write_unpackfs > "$mods"/unpackfs.conf
-        sed -e "s|services-openrc|services-${INITSYS}|" \
-            -i "$1"/etc/calamares/settings.conf
-    fi
-}
-
-configure_chroot(){
-    local fs="$1"
-    msg "Configuring [%s]" "${fs##*/}"
-    configure_hosts "$fs"
-    configure_system "$fs"
-    configure_services "$fs"
-    configure_calamares "$fs"
-    [[ ! -d "$fs/etc/artools" ]] && mkdir -p "$fs/etc/artools"
-    msg2 "Writing live.conf"
-    write_live_session_conf > "$fs/etc/artools/live.conf"
-    msg "Done configuring [%s]" "${fs##*/}"
-}
-
-clean_up_chroot(){
-    local path mnt="$1"
-    msg2 "Cleaning [%s]" "${mnt##*/}"
-
-    path=$mnt/boot
-    if [[ -d "$path" ]]; then
-        find "$path" -name 'initramfs*.img' -delete &> /dev/null
-    fi
-    path=$mnt/var/lib/pacman/sync
-    if [[ -d $path ]];then
-        find "$path" -type f -delete &> /dev/null
-    fi
-    path=$mnt/var/cache/pacman/pkg
-    if [[ -d $path ]]; then
-        find "$path" -type f -delete &> /dev/null
-    fi
-    path=$mnt/var/log
-    if [[ -d $path ]]; then
-        find "$path" -type f -delete &> /dev/null
-    fi
-    path=$mnt/var/tmp
-    if [[ -d $path ]];then
-        find "$path" -mindepth 1 -delete &> /dev/null
-    fi
-    path=$mnt/tmp
-    if [[ -d $path ]];then
-        find "$path" -mindepth 1 -delete &> /dev/null
-    fi
-    find "$mnt" -name *.pacnew -name *.pacsave -name *.pacorig -delete
-    if [[ -f "$mnt/boot/grub/grub.cfg" ]]; then
-        rm $mnt/boot/grub/grub.cfg
-    fi
-    if [[ -f "$mnt/etc/machine-id" ]]; then
-        rm $mnt/etc/machine-id
-    fi
-}

lib/iso/config.sh

@@ -0,0 +1,30 @@
+#!/hint/bash
+
+#{{{ session
+
+configure_services(){
+    local mnt="$1"
+    add_svc_"${INITSYS}" "$mnt" "${SERVICES[*]}"
+}
+
+
+write_live_session_conf(){
+    local conf=''
+    conf+=$(printf '%s\n' '# live session configuration')
+    conf+=$(printf "\nAUTOLOGIN=%s\n" "${AUTOLOGIN}")
+    conf+=$(printf "\nPASSWORD=%s\n" "${PASSWORD}")
+    printf '%s' "$conf"
+}
+
+configure_chroot(){
+    local fs="$1"
+    msg "Configuring [%s]" "${fs##*/}"
+    configure_services "$fs"
+    configure_calamares "$fs"
+    [[ ! -d "$fs/etc/artools" ]] && mkdir -p "$fs/etc/artools"
+    msg2 "Writing: live.conf"
+    write_live_session_conf > "$fs/etc/artools/live.conf"
+    msg "Done configuring [%s]" "${fs##*/}"
+}
+
+#}}}

lib/iso/dracut.sh

@@ -0,0 +1,42 @@
+#!/hint/bash
+
+#{{{ dracut
+
+prepare_initramfs_dracut(){
+    local mnt="$1"
+    local kver
+    kver=$(<"$mnt"/usr/src/linux/version)
+
+    printf "%s\n" 'add_dracutmodules+=" dmsquash-live"' > "$mnt"/etc/dracut.conf.d/50-live.conf
+
+    msg "Starting build: %s" "${kver}"
+    artix-chroot "$mnt" dracut -fqM /boot/initramfs.img "$kver"
+    msg "Image generation successful"
+
+    cp "$mnt"/boot/initramfs.img "${iso_root}"/boot/initramfs-"${arch}".img
+
+    prepare_boot_extras "$mnt"
+}
+
+configure_grub_dracut(){
+    msg "Configuring grub kernel options ..."
+    local kopts=()
+    kopts=(
+        "root=live:LABEL=${iso_label}"
+        'rd.live.squashimg=rootfs.img'
+        'rd.live.image'
+        'rootflags=auto'
+    )
+    [[ "${profile}" != 'base' ]] && kopts+=("rd.live.join=livefs.img")
+
+    local ro_opts=()
+    local rw_opts=()
+#         'rd.writable.fsimg=1'
+
+    sed -e "s|@kopts@|${kopts[*]}|" \
+        -e "s|@ro_opts@|${ro_opts[*]}|" \
+        -e "s|@rw_opts@|${rw_opts[*]}|" \
+        -i "${iso_root}"/boot/grub/kernels.cfg
+}
+
+#}}}

lib/iso/firmware.sh

@@ -0,0 +1,17 @@
+#!/hint/bash
+
+#{{{ firmware
+
+prepare_boot_extras(){
+    local src="$1" dest
+    dest=${iso_root}/boot
+
+    for fw in intel amd; do
+        cp "$src"/boot/"$fw"-ucode.img "$dest/$fw"-ucode.img
+    done
+
+    cp "$src"/boot/memtest86+/memtest.bin "$dest"/memtest
+    cp "$src"/usr/share/licenses/common/GPL2/license.txt "$dest"/memtest.COPYING
+}
+
+#}}}

lib/iso/grub.sh

@@ -1,132 +1,6 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+#!/hint/bash
 
-prepare_boot_extras(){
-    local src="$1" dest=${iso_root}/boot
-
-    for u in intel amd;do
-        cp $src/boot/$u-ucode.img $dest/$u-ucode.img
-        cp $src/usr/share/licenses/$u-ucode/LICENSE $dest/$u-ucode.LICENSE
-    done
-
-    cp $src/boot/memtest86+/memtest.bin $dest/memtest
-    cp $src/usr/share/licenses/common/GPL2/license.txt $dest/memtest.COPYING
-}
-
-##################dracut##################
-
-prepare_initramfs_dracut(){
-    local mnt="$1"
-    local kver=$(<"$mnt"/usr/src/linux/version)
-
-    printf "%s\n" 'add_dracutmodules+=" dmsquash-live"' > "$mnt"/etc/dracut.conf.d/50-live.conf
-
-    msg "Starting build: %s" "${kver}"
-    artools-chroot "$mnt" dracut -fqM /boot/initramfs.img "$kver"
-    msg "Image generation successful"
-
-    cp "$mnt"/boot/initramfs.img "${iso_root}"/boot/initramfs-"${ARCH}".img
-
-    prepare_boot_extras "$mnt"
-}
-
-configure_grub_dracut(){
-    msg "Configuring grub kernel options ..."
-    local kopts=(
-        "root=live:LABEL=${iso_label}"
-        'rd.live.squashimg=rootfs.img'
-        'rd.live.image'
-        'rootflags=auto'
-    )
-    [[ "${PROFILE}" != 'base' ]] && kopts+=("rd.live.join=livefs.img")
-
-    local ro_opts=()
-    local rw_opts=()
-#         'rd.writable.fsimg=1'
-
-    sed -e "s|@kopts@|${kopts[*]}|" \
-        -e "s|@ro_opts@|${ro_opts[*]}|" \
-        -e "s|@rw_opts@|${rw_opts[*]}|" \
-        -i ${iso_root}/boot/grub/kernels.cfg
-}
-
-#############################################
-
-write_mkinitcpio_conf() {
-    msg2 "Writing mkinitcpio.conf ..."
-    local conf="$1/etc/mkinitcpio-artix.conf"
-    printf "%s\n" 'MODULES=(loop dm-snapshot)' > $conf
-    printf "%s\n" 'COMPRESSION="xz"' >> $conf
-    if [[ "${PROFILE}" == 'base' ]];then
-        printf "%s\n" 'HOOKS=(base udev artix_shutdown artix artix_loop_mnt
-                            artix_pxe_common artix_pxe_http artix_pxe_nbd artix_pxe_nfs
-                            artix_kms modconf block filesystems keyboard keymap)' >> $conf
-    else
-        printf "%s\n" 'HOOKS=(base udev artix_shutdown artix artix_loop_mnt
-                            artix_kms modconf block filesystems keyboard keymap)' >> $conf
-    fi
-}
-
-prepare_initcpio(){
-    msg2 "Copying initcpio ..."
-    local dest="$1"
-    cp /etc/initcpio/hooks/artix* $dest/etc/initcpio/hooks
-    cp /etc/initcpio/install/artix* $dest/etc/initcpio/install
-    cp /etc/initcpio/artix_shutdown $dest/etc/initcpio
-}
-
-prepare_initramfs(){
-    local mnt="$1"
-
-    prepare_initcpio "$mnt"
-
-    write_mkinitcpio_conf "$mnt"
-
-    if [[ -n ${GPG_KEY} ]]; then
-        su ${OWNER} -c "gpg --export ${GPG_KEY} >/tmp/GPG_KEY"
-        exec 17<>/tmp/GPG_KEY
-    fi
-    local _kernel=$(<"$mnt"/usr/src/linux/version)
-    ARTIX_GNUPG_FD=${GPG_KEY:+17} artools-chroot "$mnt" \
-        /usr/bin/mkinitcpio -k ${_kernel} \
-        -c /etc/mkinitcpio-artix.conf \
-        -g /boot/initramfs.img
-
-    if [[ -n ${GPG_KEY} ]]; then
-        exec 17<&-
-    fi
-    if [[ -f /tmp/GPG_KEY ]]; then
-        rm /tmp/GPG_KEY
-    fi
-
-    cp $mnt/boot/initramfs.img ${iso_root}/boot/initramfs-${ARCH}.img
-    prepare_boot_extras "$mnt"
-}
-
-configure_grub(){
-    msg "Configuring grub kernel options ..."
-    local ro_opts=()
-    local rw_opts=()
-    local kopts=("label=${iso_label}")
-
-    [[ "${PROFILE}" != 'base' ]] && kopts+=('overlay=livefs')
-
-    sed -e "s|@kopts@|${kopts[*]}|" \
-        -e "s|@ro_opts@|${ro_opts[*]}|" \
-        -e "s|@rw_opts@|${rw_opts[*]}|" \
-        -i ${iso_root}/boot/grub/kernels.cfg
-}
+#{{{ grub
 
 prepare_grub(){
     local platform=i386-pc img='core.img' prefix=/boot/grub
@@ -135,52 +9,53 @@ prepare_grub(){
     local livecfg="$2"/usr/share/grub
     local grub=${iso_root}/boot/grub efi=${iso_root}/efi/boot
 
+    prepare_dir "${grub}/${platform}"
 
-    prepare_dir ${grub}/${platform}
+    cp "${livecfg}"/cfg/*.cfg "${grub}"
 
-    cp ${livecfg}/cfg/*.cfg ${grub}
-
-    cp ${lib}/${platform}/* ${grub}/${platform}
+    cp "${lib}/${platform}"/* "${grub}/${platform}"
 
     msg2 "Building %s ..." "${img}"
 
-    grub-mkimage -d ${grub}/${platform} -o ${grub}/${platform}/${img} -O ${platform} -p ${prefix} biosdisk iso9660
+    grub-mkimage -d "${grub}/${platform}" -o "${grub}/${platform}/${img}" -O "${platform}" -p "${prefix}" biosdisk iso9660
 
-    cat ${grub}/${platform}/cdboot.img ${grub}/${platform}/${img} > ${grub}/${platform}/eltorito.img
+    cat "${grub}/${platform}"/cdboot.img "${grub}/${platform}/${img}" > "${grub}/${platform}"/eltorito.img
 
     platform=x86_64-efi
     img=bootx64.efi
 
-    prepare_dir ${efi}
-    prepare_dir ${grub}/${platform}
+    prepare_dir "${efi}"
+    prepare_dir "${grub}/${platform}"
 
-    cp ${lib}/${platform}/* ${grub}/${platform}
+    cp "${lib}/${platform}"/* "${grub}/${platform}"
 
     msg2 "Building %s ..." "${img}"
 
-    grub-mkimage -d ${grub}/${platform} -o ${efi}/${img} -O ${platform} -p ${prefix} iso9660
+    grub-mkimage -d "${grub}/${platform}" -o "${efi}/${img}" -O "${platform}" -p "${prefix}" iso9660
 
-    prepare_dir ${grub}/themes
+    prepare_dir "${grub}"/themes
 
-    cp -r ${theme}/themes/artix ${grub}/themes
-    cp -r ${livecfg}/{locales,tz} ${grub}
+    cp -r "${theme}"/themes/artix "${grub}"/themes
+    cp -r "${livecfg}"/{locales,tz} "${grub}"
 
     if [[ -f /usr/share/grub/unicode.pf2 ]];then
         msg2 "Copying %s ..." "unicode.pf2"
-        cp /usr/share/grub/unicode.pf2 ${grub}/unicode.pf2
+        cp /usr/share/grub/unicode.pf2 "${grub}"/unicode.pf2
     else
         msg2 "Creating %s ..." "unicode.pf2"
-        grub-mkfont -o ${grub}/unicode.pf2 /usr/share/fonts/misc/unifont.bdf
+        grub-mkfont -o "${grub}"/unicode.pf2 /usr/share/fonts/misc/unifont.bdf
     fi
 
     local size=4M mnt="${mnt_dir}/efiboot" efi_img="${iso_root}/boot/efi.img"
     msg2 "Creating fat image of %s ..." "${size}"
-    truncate -s ${size} "${efi_img}"
+    truncate -s "${size}" "${efi_img}"
     mkfs.fat -n ARTIX_EFI "${efi_img}" &>/dev/null
     prepare_dir "${mnt}"
     mount_img "${efi_img}" "${mnt}"
-    prepare_dir ${mnt}/efi/boot
+    prepare_dir "${mnt}"/efi/boot
     msg2 "Building %s ..." "${img}"
-    grub-mkimage -d ${grub}/${platform} -o ${mnt}/efi/boot/${img} -O ${platform} -p ${prefix} iso9660
+    grub-mkimage -d "${grub}/${platform}" -o "${mnt}"/efi/boot/"${img}" -O "${platform}" -p "${prefix}" iso9660
     umount_img "${mnt}"
 }
+
+#}}}

lib/iso/initcpio.sh

@@ -0,0 +1,72 @@
+#!/hint/bash
+
+#{{{ initcpio
+
+make_checksum(){
+    local file="$1"
+    msg2 "Creating md5sum ..."
+    cd "${iso_root}${live_dir}"
+    md5sum "$file" > "$file".md5
+    cd "${OLDPWD}"
+}
+
+make_sig () {
+    local file="$1"
+    msg2 "Creating signature file..."
+    chown "${owner}:$(id --group "${owner}")" "${iso_root}${live_dir}"
+    su "${owner}" -c "gpg --detach-sign --output $file.sig --default-key ${GPG_KEY} $file"
+    chown "root:root" "${iso_root}${live_dir}"
+}
+
+export_gpg_publickey() {
+    key_export=${WORKSPACE_DIR}/pubkey.gpg
+    if [[ ! -e "${key_export}" ]]; then
+        gpg --batch --output "${key_export}" --export "${GPG_KEY}"
+    fi
+}
+
+prepare_initramfs_mkinitcpio() {
+    local mnt="$1" packages=() mkinitcpio_conf k
+
+    mkinitcpio_conf=mkinitcpio-default.conf
+    [[ "${profile}" == 'base' ]] && mkinitcpio_conf=mkinitcpio-pxe.conf
+    k=$(<"$mnt"/usr/src/linux/version)
+
+    read_from_list "${common_dir}/Packages-boot"
+    basestrap "${basestrap_args[@]}" "$mnt" "${packages[@]}"
+
+    if [[ -n "${GPG_KEY}" ]]; then
+        exec {ARTIX_GNUPG_FD}<>"${key_export}"
+        export ARTIX_GNUPG_FD
+    fi
+
+    artix-chroot "$mnt" mkinitcpio -k "$k" \
+        -c /etc/"$mkinitcpio_conf" \
+        -g /boot/initramfs.img
+
+    if [[ -n "${GPG_KEY}" ]]; then
+        exec {ARTIX_GNUPG_FD}<&-
+        unset ARTIX_GNUPG_FD
+    fi
+    if [[ -f "${key_export}" ]]; then
+        rm "${key_export}"
+    fi
+    cp "$mnt"/boot/initramfs.img "${iso_root}"/boot/initramfs-"${arch}".img
+    prepare_boot_extras "$mnt"
+}
+
+configure_grub_mkinitcpio() {
+    msg "Configuring grub kernel options ..."
+    local ro_opts=()
+    local rw_opts=()
+    local kopts=("label=${iso_label}")
+
+    [[ "${profile}" != 'base' ]] && kopts+=('overlay=livefs')
+
+    sed -e "s|@kopts@|${kopts[*]}|" \
+        -e "s|@ro_opts@|${ro_opts[*]}|" \
+        -e "s|@rw_opts@|${rw_opts[*]}|" \
+        -i "${iso_root}"/boot/grub/kernels.cfg
+}
+
+#}}}

lib/iso/iso.sh

@@ -1,127 +1,30 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+#!/hint/bash
 
-make_sig () {
-    local file="$1"
-    msg2 "Creating signature file..."
-    cd ${iso_root}${live_dir}
-    chown "${OWNER}:$(id --group ${OWNER})" "${iso_root}${live_dir}"
-    su ${OWNER} -c "gpg --detach-sign --default-key ${GPG_KEY} $file"
-    chown -R root "${iso_root}${live_dir}"
-    cd ${OLDPWD}
-}
-
-make_checksum(){
-    local file="$1"
-    msg2 "Creating md5sum ..."
-    cd ${iso_root}${live_dir}
-    md5sum $file > $file.md5
-    cd ${OLDPWD}
-}
-
-make_ext_img(){
-    local src="$1"
-    local size=32G
-    local mnt="${mnt_dir}/${src##*/}"
-    mkdir -p ${work_dir}/embed${live_dir}
-    local extimg=${work_dir}/embed${live_dir}/${src##*/}.img
-
-    msg2 "Creating ext4 image of %s ..." "${size}"
-    truncate -s ${size} "${extimg}"
-    local ext4_args=()
-    ext4_args+=(-O ^has_journal,^resize_inode -E lazy_itable_init=0 -m 0)
-    mkfs.ext4 ${ext4_args[@]} -F "${extimg}" &>/dev/null
-    tune2fs -c 0 -i 0 "${extimg}" &> /dev/null
-    mount_img "${extimg}" "${mnt}"
-    msg2 "Copying %s ..." "${src}/"
-    cp -aT "${src}/" "${mnt}/"
-    umount_img "${mnt}"
-}
-
-has_changed(){
-    local src="$1" dest="$2"
-    if [[ -f "${dest}" ]]; then
-        local has_changes=$(find ${src} -newer ${dest})
-        if [[ -n "${has_changes}" ]]; then
-            msg2 "Possible changes for %s ..." "${src}"
-            msg2 "%s" "${has_changes}"
-            msg2 "SquashFS image %s is not up to date, rebuilding..." "${dest}"
-            rm "${dest}"
-        else
-            msg2 "SquashFS image %s is up to date, skipping." "${dest}"
-            return 1
-        fi
-    fi
-}
-
-# $1: image path
-make_sfs() {
-    local sfs_in="$1"
-    if [[ ! -e "${sfs_in}" ]]; then
-        error "The path %s does not exist" "${sfs_in}"
-        retrun 1
-    fi
-
-    mkdir -p ${iso_root}${live_dir}
-
-    local img_name=${sfs_in##*/}.img
-    local img_file=${sfs_in}.img
-
-    local sfs_out="${iso_root}${live_dir}/${img_name}"
-
-    if has_changed "${sfs_in}" "${sfs_out}"; then
-
-        msg "Generating SquashFS image for %s" "${sfs_in}"
-
-        local mksfs_args=()
-
-        if ${persist};then
-            make_ext_img "${sfs_in}"
-            mksfs_args+=("${work_dir}/embed")
-        else
-            mksfs_args+=("${sfs_in}")
-        fi
-
-        mksfs_args+=("${sfs_out}")
-
-        mksfs_args+=(-comp xz -b 256K -Xbcj x86 -noappend)
-
-        mksquashfs "${mksfs_args[@]}"
-
-        if ! ${use_dracut}; then
-            make_checksum "${img_name}"
-            if [[ -n ${GPG_KEY} ]];then
-                make_sig "${img_name}"
-            fi
-        fi
-        ${persist} && rm -r "${work_dir}/embed"
-    fi
-}
+#{{{ iso
 
 get_disturl(){
+    # shellcheck disable=1091
     . /usr/lib/os-release
-    echo "${HOME_URL}"
+    printf "%s\n" "${HOME_URL}"
+}
+
+get_osname(){
+    # shellcheck disable=1091
+    . /usr/lib/os-release
+    printf "%s\n" "${NAME}"
 }
 
 assemble_iso(){
     msg "Creating ISO image..."
-    local mod_date=$(date -u +%Y-%m-%d-%H-%M-%S-00  | sed -e s/-//g)
-    local appid="$(get_osname) Live/Rescue CD"
-    local publisher="$(get_osname) <$(get_disturl)>"
+    local mod_date
+    mod_date=$(date -u +%Y-%m-%d-%H-%M-%S-00  | sed -e s/-//g)
+    local appid
+    appid="$(get_osname) Live/Rescue CD"
+    local publisher
+    publisher="$(get_osname) <$(get_disturl)>"
 
     xorriso -as mkisofs \
-        --modification-date=${mod_date} \
+        --modification-date="${mod_date}" \
         --protective-msdos-label \
         -volid "${iso_label}" \
         -appid "${appid}" \
@@ -130,17 +33,18 @@ assemble_iso(){
         -r -graft-points -no-pad \
         --sort-weight 0 / \
         --sort-weight 1 /boot \
-        --grub2-mbr ${iso_root}/boot/grub/i386-pc/boot_hybrid.img \
+        --grub2-mbr "${iso_root}"/boot/grub/i386-pc/boot_hybrid.img \
         -partition_offset 16 \
         -b boot/grub/i386-pc/eltorito.img \
         -c boot.catalog \
         -no-emul-boot -boot-load-size 4 -boot-info-table --grub2-boot-info \
         -eltorito-alt-boot \
-        -append_partition 2 0xef ${iso_root}/boot/efi.img \
+        -append_partition 2 0xef "${iso_root}"/boot/efi.img \
         -e --interval:appended_partition_2:all:: -iso_mbr_part_type 0x00 \
         -no-emul-boot \
         -iso-level 3 \
-        -o ${iso_dir}/${iso_file} \
-        ${iso_root}/
+        -o "${iso_dir}/${iso_file}" \
+        "${iso_root}"/
 }
 
+#}}}

lib/iso/mount.sh

@@ -1,19 +1,9 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+#!/hint/bash
+
+#{{{ mount
 
 track_img() {
-    info "mount: [%s]" "$2"
+    msg2 "mount: [%s]" "$2"
     mount "$@" && IMG_ACTIVE_MOUNTS=("$2" "${IMG_ACTIVE_MOUNTS[@]}")
 }
 
@@ -24,8 +14,8 @@ mount_img() {
 }
 
 umount_img() {
-    if [[ -n ${IMG_ACTIVE_MOUNTS[@]} ]];then
-        info "umount: [%s]" "${IMG_ACTIVE_MOUNTS[@]}"
+    if [[ -n "${IMG_ACTIVE_MOUNTS[*]}" ]];then
+        msg2 "umount: [%s]" "${IMG_ACTIVE_MOUNTS[@]}"
         umount "${IMG_ACTIVE_MOUNTS[@]}"
         unset IMG_ACTIVE_MOUNTS
         rm -r "$1"
@@ -33,30 +23,33 @@ umount_img() {
 }
 
 track_fs() {
-    info "overlayfs mount: [%s]" "$5"
+    msg2 "overlayfs mount: [%s]" "$5"
     mount "$@" && FS_ACTIVE_MOUNTS=("$5" "${FS_ACTIVE_MOUNTS[@]}")
 }
 
 mount_overlayfs(){
     FS_ACTIVE_MOUNTS=()
-    local lower= upper="$1" work="$2"
+    local lower upper="$1" work="$2"
     mkdir -p "${mnt_dir}/work"
     mkdir -p "$upper"
     case $upper in
         */livefs) lower="$work/rootfs" ;;
         */bootfs)
             lower="$work/rootfs"
-            [[ -d "$work/livefs" ]] && lower="$work/livefs":"$work/rootfs"
+            [[ -d "$work/livefs" ]] && lower="$work/livefs:$work/rootfs"
         ;;
     esac
+    # shellcheck disable=2140
     track_fs -t overlay overlay -olowerdir="$lower",upperdir="$upper",workdir="${mnt_dir}/work" "$upper"
 }
 
 umount_overlayfs(){
-    if [[ -n ${FS_ACTIVE_MOUNTS[@]} ]];then
-        info "overlayfs umount: [%s]" "${FS_ACTIVE_MOUNTS[@]}"
+    if [[ -n "${FS_ACTIVE_MOUNTS[*]}" ]];then
+        msg2 "overlayfs umount: [%s]" "${FS_ACTIVE_MOUNTS[@]}"
         umount "${FS_ACTIVE_MOUNTS[@]}"
         unset FS_ACTIVE_MOUNTS
         rm -rf "${mnt_dir}/work"
     fi
 }
+
+#}}}

lib/iso/profile.sh

@@ -1,101 +1,86 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+#!/hint/bash
+
+#{{{ profile
 
 show_profile(){
     msg2 "iso_file: %s" "${iso_file}"
     msg2 "AUTOLOGIN: %s" "${AUTOLOGIN}"
-    msg2 "HOST_NAME: %s" "${HOST_NAME}"
-    msg2 "USER_NAME: %s" "${USER_NAME}"
     msg2 "PASSWORD: %s" "${PASSWORD}"
-    msg2 "ADDGROUPS: %s" "${ADDGROUPS}"
-    msg2 "SERVICES_LIVE: %s" "${SERVICES_LIVE[*]}"
     msg2 "SERVICES: %s" "${SERVICES[*]}"
 }
 
 load_profile(){
     local profile_dir="${DATADIR}/iso-profiles"
-    [[ -d ${WORKSPACE_DIR}/iso-profiles ]] && profile_dir=${WORKSPACE_DIR}/iso-profiles
+    [[ -d "${WORKSPACE_DIR}"/iso-profiles ]] && profile_dir="${WORKSPACE_DIR}"/iso-profiles
 
-    ROOT_LIST="$profile_dir/${PROFILE}/Packages-Root"
-    ROOT_OVERLAY="$profile_dir/${PROFILE}/root-overlay"
+    root_list="$profile_dir/${profile}/Packages-Root"
+    root_overlay="$profile_dir/${profile}/root-overlay"
 
-    [[ -f "$profile_dir/${PROFILE}/Packages-Live" ]] && LIVE_LIST="$profile_dir/${PROFILE}/Packages-Live"
-    [[ -d "$profile_dir/${PROFILE}/live-overlay" ]] && LIVE_OVERLAY="$profile_dir/${PROFILE}/live-overlay"
+    [[ -f "$profile_dir/${profile}/Packages-Live" ]] && live_list="$profile_dir/${profile}/Packages-Live"
+    [[ -d "$profile_dir/${profile}/live-overlay" ]] && live_overlay="$profile_dir/${profile}/live-overlay"
 
-    [[ -f $profile_dir/${PROFILE}/profile.conf ]] || return 1
+    common_dir="${DATADIR}/iso-profiles/common"
+    [[ -d "$profile_dir"/common ]] && common_dir="${profile_dir}"/common
 
-    [[ -r $profile_dir/${PROFILE}/profile.conf ]] && . $profile_dir/${PROFILE}/profile.conf
+    [[ -f $profile_dir/${profile}/profile.conf ]] || return 1
 
-    DISPLAYMANAGER=${DISPLAYMANAGER:-'none'}
+    # shellcheck disable=1090
+    [[ -r "$profile_dir/${profile}"/profile.conf ]] && . "$profile_dir/${profile}"/profile.conf
 
-    AUTOLOGIN=${AUTOLOGIN:-"true"}
-    [[ ${DISPLAYMANAGER} == 'none' ]] && AUTOLOGIN="false"
-
-    HOST_NAME=${HOST_NAME:-'artix'}
-
-    USER_NAME=${USER_NAME:-'artix'}
+    AUTOLOGIN=${AUTOLOGIN:-true}
 
     PASSWORD=${PASSWORD:-'artix'}
 
-    ADDGROUPS=${ADDGROUPS:-"video,power,optical,network,lp,scanner,wheel,users,log"}
-
-    if [[ -z ${SERVICES[@]} ]];then
+    if [[ -z "${SERVICES[*]}" ]];then
         SERVICES=('acpid' 'bluetoothd' 'cronie' 'cupsd' 'syslog-ng' 'connmand')
     fi
 
-    if [[ ${DISPLAYMANAGER} != "none" ]];then
-        case "${INITSYS}" in
-            'openrc') SERVICES+=('xdm') ;;
-            'runit'|'s6') SERVICES+=("${DISPLAYMANAGER}") ;;
-        esac
-    fi
-
-    SERVICES_LIVE=('artix-live' 'pacman-init')
-
     return 0
 }
 
-write_live_session_conf(){
-    local conf=''
-    conf+=$(printf '%s\n' '# live session configuration')
-    conf+=$(printf "\nAUTOLOGIN=%s\n" "${AUTOLOGIN}")
-    conf+=$(printf "\nUSER_NAME=%s\n" "${USER_NAME}")
-    conf+=$(printf "\nPASSWORD=%s\n" "${PASSWORD}")
-    conf+=$(printf "\nADDGROUPS='%s'\n" "${ADDGROUPS}")
-    printf '%s' "$conf"
+read_from_list() {
+    local list="$1"
+    local _space="s| ||g"
+    local _clean=':a;N;$!ba;s/\n/ /g'
+    local _com_rm="s|#.*||g"
+
+    local _init="s|@initsys@|${INITSYS}|g"
+
+    msg2 "Loading Packages: [%s] ..." "${list##*/}"
+    packages+=($(sed "$_com_rm" "$list" \
+            | sed "$_space" \
+            | sed "$_init" \
+            | sed "$_clean"))
+}
+
+read_from_services() {
+    for svc in "${SERVICES[@]}"; do
+        case "$svc" in
+            sddm|gdm|lightdm|mdm|greetd|lxdm|xdm)
+                packages+=("$svc-${INITSYS}"); display_manager="$svc" ;;
+            NetworkManager) packages+=("networkmanager-${INITSYS}") ;;
+            connmand) packages+=("connman-${INITSYS}") ;;
+            cupsd) packages+=("cups-${INITSYS}") ;;
+            bluetoothd) packages+=("bluez-${INITSYS}") ;;
+            syslog-ng|metalog) packages+=("$svc-${INITSYS}") ;;
+        esac
+    done
 }
 
 load_pkgs(){
-    local pkglist="$1" init="$2"
-    info "Loading Packages: [%s] ..." "${pkglist##*/}"
+    local pkglist="$1"
+    packages=()
 
-    local _init="s|@$init||g"
-    case "$init" in
-        'openrc') _init_rm1="s|@runit.*||g"; _init_rm2="s|@s6.*||g" ;;
-        's6') _init_rm1="s|@runit.*||g"; _init_rm2="s|@openrc.*||g" ;;
-        'runit') _init_rm1="s|@s6.*||g"; _init_rm2="s|@openrc.*||g" ;;
-    esac
-
-    local _space="s| ||g" \
-        _clean=':a;N;$!ba;s/\n/ /g' \
-        _com_rm="s|#.*||g"
-
-    packages=($(sed "$_com_rm" "$pkglist" \
-            | sed "$_space" \
-            | sed "$_purge" \
-            | sed "$_init" \
-            | sed "$_init_rm1" \
-            | sed "$_init_rm2" \
-            | sed "$_clean"))
+    if [[ "${pkglist##*/}" == "Packages-Root" ]]; then
+        read_from_list "${common_dir}/Packages-base"
+        read_from_list "${common_dir}/Packages-apps"
+        read_from_list "${common_dir}/Packages-${INITSYS}"
+        [[ -n "${live_list}" ]] && read_from_list "${common_dir}/Packages-xorg"
+        read_from_list "$pkglist"
+        read_from_services
+    else
+        read_from_list "$pkglist"
+    fi
 }
+
+#}}}

lib/iso/services.sh

@@ -0,0 +1,68 @@
+#!/hint/bash
+
+#{{{ services
+
+add_svc_openrc(){
+    local mnt="$1" names="$2" rlvl="${3:-default}"
+    for svc in $names; do
+        if [[ -f $mnt/etc/init.d/$svc ]];then
+            msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
+            chroot "$mnt" rc-update add "$svc" "$rlvl" &>/dev/null
+        fi
+    done
+}
+
+add_svc_runit(){
+    local mnt="$1" names="$2" rlvl="${3:-default}"
+    for svc in $names; do
+        if [[ -d $mnt/etc/runit/sv/$svc ]]; then
+            msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
+            chroot "$mnt" ln -s /etc/runit/sv/"$svc" /etc/runit/runsvdir/"$rlvl" &>/dev/null
+        fi
+    done
+}
+
+add_svc_s6(){
+    local mnt="$1" names="$2" rlvl="${3:-default}" dep
+    dep="$mnt"/etc/s6/sv/"$display_manager"-srv/dependencies.d
+    for svc in $names; do
+        msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
+        chroot "$mnt" s6-service add "$rlvl" "$svc"
+        if [[ "$svc" == "$display_manager" ]]; then
+            if [[ -d "$dep" ]]; then
+                touch "$dep"/artix-live
+            fi
+        fi
+    done
+
+    chroot "$mnt" s6-db-reload -r
+
+    local src=/etc/s6/current skel=/etc/s6/skel getty='/usr/bin/agetty -L -8 tty7 115200'
+    # rebuild s6-linux-init binaries
+    chroot "$mnt" rm -r "$src"
+    chroot "$mnt" s6-linux-init-maker -1 -N -f "$skel" -G "$getty" -c "$src" "$src"
+    chroot "$mnt" mv "$src"/bin/init "$src"/bin/s6-init
+    chroot "$mnt" cp -a "$src"/bin /usr
+}
+
+add_svc_suite66(){
+    local mnt="$1" names="$2"
+    for svc in $names; do
+        if [[ -f "$mnt"/etc/66/service/"$svc" ]]; then
+            msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
+            chroot "$mnt" 66-enable -t default "$svc" &>/dev/null
+        fi
+    done
+}
+
+add_svc_dinit(){
+    local mnt="$1" names="$2"
+    for svc in $names; do
+        if [[ -d $mnt/etc/dinit.d/boot.d ]]; then
+            msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
+            chroot "$mnt" ln -s ../"$svc" /etc/dinit.d/boot.d/"$svc" &>/dev/null
+        fi
+    done
+}
+
+#}}}

lib/iso/squash.sh

@@ -0,0 +1,86 @@
+#!/hint/bash
+
+#{{{ squash
+
+make_ext_img(){
+    local src="$1"
+    local size=32G
+    local mnt="${mnt_dir}/${src##*/}"
+    mkdir -p "${work_dir}"/embed"${live_dir}"
+    local extimg="${work_dir}/embed${live_dir}/${src##*/}".img
+
+    msg2 "Creating ext4 image of %s ..." "${size}"
+    truncate -s ${size} "${extimg}"
+    local ext4_args=()
+    ext4_args+=("-O ^has_journal,^resize_inode" -E lazy_itable_init=0 -m 0)
+    mkfs.ext4 "${ext4_args[@]}" -F "${extimg}" &>/dev/null
+    tune2fs -c 0 -i 0 "${extimg}" &> /dev/null
+    mount_img "${extimg}" "${mnt}"
+    msg2 "Copying %s ..." "${src}/"
+    cp -aT "${src}/" "${mnt}/"
+    umount_img "${mnt}"
+}
+
+has_changed(){
+    local src="$1" dest="$2"
+    if [[ -f "${dest}" ]]; then
+        local has_changes
+        has_changes=$(find "${src}" -newer "${dest}")
+        if [[ -n "${has_changes}" ]]; then
+            msg2 "Possible changes for %s ..." "${src}"
+            msg2 "%s" "${has_changes}"
+            msg2 "SquashFS image %s is not up to date, rebuilding..." "${dest}"
+            rm "${dest}"
+        else
+            msg2 "SquashFS image %s is up to date, skipping." "${dest}"
+            return 1
+        fi
+    fi
+}
+
+# $1: image path
+make_sfs() {
+    local sfs_in="$1"
+    if [[ ! -e "${sfs_in}" ]]; then
+        error "The path %s does not exist" "${sfs_in}"
+        retrun 1
+    fi
+
+    mkdir -p "${iso_root}${live_dir}"
+
+    local img_name=${sfs_in##*/}.img
+
+    local sfs_out="${iso_root}${live_dir}/${img_name}"
+
+    if has_changed "${sfs_in}" "${sfs_out}"; then
+
+        msg "Generating SquashFS image for %s" "${sfs_in}"
+
+        local mksfs_args=()
+
+        if ${persist};then
+            make_ext_img "${sfs_in}"
+            mksfs_args+=("${work_dir}/embed")
+        else
+            mksfs_args+=("${sfs_in}")
+        fi
+
+        mksfs_args+=("${sfs_out}")
+
+        mksfs_args+=(-comp "${COMPRESSION}" "${COMPRESSION_ARGS[@]}" -noappend)
+
+        mksquashfs "${mksfs_args[@]}"
+
+        if ! ${use_dracut}; then
+            make_checksum "${img_name}"
+            if [[ -n ${GPG_KEY} ]];then
+                make_sig "${iso_root}${live_dir}/${img_name}"
+            fi
+        fi
+        if ${persist}; then
+            rm -r "${work_dir}/embed"
+        fi
+    fi
+}
+
+#}}}

lib/iso/trap.sh

@@ -0,0 +1,48 @@
+#!/hint/bash
+
+#{{{ trap
+
+error_function() {
+    local func="$1"
+    # first exit all subshells, then print the error
+    if (( ! BASH_SUBSHELL )); then
+        error "A failure occurred in %s()." "$func"
+        plain "Aborting..."
+    fi
+    umount_overlayfs
+    umount_img
+    exit 2
+}
+
+run_safe() {
+    local restoretrap func="$1"
+    set -e
+    set -E
+    restoretrap=$(trap -p ERR)
+    trap 'error_function $func' ERR
+
+    "$func"
+
+    eval "$restoretrap"
+    set +E
+    set +e
+}
+
+trap_exit() {
+    local sig=$1; shift
+    error "$@"
+    umount_overlayfs
+    trap -- "$sig"
+    kill "-$sig" "$$"
+}
+
+prepare_traps(){
+    for sig in TERM HUP QUIT; do
+        # shellcheck disable=2064
+        trap "trap_exit $sig \"$(gettext "%s signal caught. Exiting...")\" \"$sig\"" "$sig"
+    done
+    trap 'trap_exit INT "$(gettext "Aborted by user! Exiting...")"' INT
+#     trap 'trap_exit USR1 "$(gettext "An unknown error has occurred. Exiting...")"' ERR
+}
+
+#}}}

lib/iso/util.sh

@@ -1,155 +0,0 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-error_function() {
-    local func="$1"
-    # first exit all subshells, then print the error
-    if (( ! BASH_SUBSHELL )); then
-        error "A failure occurred in %s()." "$func"
-        plain "Aborting..."
-    fi
-    umount_overlayfs
-    umount_img
-    exit 2
-}
-
-run_safe() {
-    local restoretrap func="$1"
-    set -e
-    set -E
-    restoretrap=$(trap -p ERR)
-    trap 'error_function $func' ERR
-
-    "$func"
-
-    eval $restoretrap
-    set +E
-    set +e
-}
-
-trap_exit() {
-    local sig=$1; shift
-    error "$@"
-    umount_overlayfs
-    trap -- "$sig"
-    kill "-$sig" "$$"
-}
-
-prepare_traps(){
-    for sig in TERM HUP QUIT; do
-        trap "trap_exit $sig \"$(gettext "%s signal caught. Exiting...")\" \"$sig\"" "$sig"
-    done
-    trap 'trap_exit INT "$(gettext "Aborted by user! Exiting...")"' INT
-#     trap 'trap_exit USR1 "$(gettext "An unknown error has occurred. Exiting...")"' ERR
-}
-
-copy_overlay(){
-    local src="$1" dest="$2"
-    if [[ -e "$src" ]];then
-        msg2 "Copying [%s] ..." "${src##*/}"
-        cp -LR "$src"/* "$dest"
-    fi
-}
-
-make_rootfs() {
-    if [[ ! -e ${work_dir}/rootfs.lock ]]; then
-        msg "Prepare [Base installation] (rootfs)"
-        local rootfs="${work_dir}/rootfs"
-
-        prepare_dir "${rootfs}"
-
-        basestrap "${basestrap_args[@]}" "${rootfs}" "${packages[@]}"
-
-        copy_overlay "${ROOT_OVERLAY}" "${rootfs}"
-
-        [[ -z ${LIVE_LIST} ]] && configure_chroot "${rootfs}"
-
-        clean_up_chroot "${rootfs}"
-
-        : > ${work_dir}/rootfs.lock
-
-        msg "Done [Base installation] (rootfs)"
-    fi
-}
-
-make_livefs() {
-    if [[ ! -e ${work_dir}/livefs.lock ]]; then
-        msg "Prepare [Live installation] (livefs)"
-        local livefs="${work_dir}/livefs"
-
-        prepare_dir "${livefs}"
-
-        mount_overlayfs "${livefs}" "${work_dir}"
-
-        basestrap "${basestrap_args[@]}" "${livefs}" "${packages[@]}"
-
-        copy_overlay "${LIVE_OVERLAY}" "${livefs}"
-
-        configure_chroot "${livefs}"
-
-        umount_overlayfs
-
-        clean_up_chroot "${livefs}"
-
-        : > ${work_dir}/livefs.lock
-
-        msg "Done [Live installation] (livefs)"
-    fi
-}
-
-make_bootfs() {
-    if [[ ! -e ${work_dir}/bootfs.lock ]]; then
-        msg "Prepare [/iso/boot]"
-
-        prepare_dir "${iso_root}/boot"
-
-        cp ${work_dir}/rootfs/boot/vmlinuz* ${iso_root}/boot/vmlinuz-${ARCH}
-
-        local bootfs="${work_dir}/bootfs"
-
-        mount_overlayfs "${bootfs}" "${work_dir}"
-
-        if ${use_dracut}; then
-            prepare_initramfs_dracut "${bootfs}"
-        else
-            prepare_initramfs "${bootfs}"
-        fi
-
-        umount_overlayfs
-
-        rm -R ${bootfs}
-        : > ${work_dir}/bootfs.lock
-        msg "Done [/iso/boot]"
-    fi
-}
-
-make_grub(){
-    if [[ ! -e ${work_dir}/grub.lock ]]; then
-        msg "Prepare [/iso/boot/grub]"
-
-        local layer=${work_dir}/rootfs
-        [[ -n ${LIVE_LIST} ]] && layer=${work_dir}/livefs
-
-        prepare_grub "${work_dir}/rootfs" "$layer"
-
-        if ${use_dracut}; then
-            configure_grub_dracut
-        else
-            configure_grub
-        fi
-
-        : > ${work_dir}/grub.lock
-        msg "Done [/iso/boot/grub]"
-    fi
-}

lib/pkg/common.sh

@@ -0,0 +1,37 @@
+#!/hint/bash
+
+#{{{ common functions
+
+get_compliant_name(){
+    local gitname="$1"
+    case "$gitname" in
+        *+) gitname=${gitname//+/plus} ;;
+        *+*) gitname=${gitname//+/-} ;;
+    esac
+    printf "%s\n" "$gitname"
+}
+
+get_pkg_org(){
+    local pkg="$1" org sub
+    case ${pkg} in
+        ruby-*) org="packagesRuby" ;;
+        perl-*) org="packagesPerl" ;;
+        python-*|python2-*) org="packagesPython" ;;
+        *) sub=${pkg:0:1}; org="packages${sub^^}" ;;
+    esac
+    printf "%s\n" "$org"
+}
+
+api_put() {
+    curl -s -X PUT "$@"
+}
+
+api_delete() {
+    curl -s -X DELETE "$@"
+}
+
+api_post() {
+    curl -s -X POST "$@"
+}
+
+#}}}

lib/pkg/deploy.sh

@@ -0,0 +1,37 @@
+#!/hint/bash
+
+#{{{ functions
+
+find_cached_pkgfile() {
+    local searchdirs=("$PKGDEST" "$PWD") results=()
+    local pkg="$1"
+    for dir in "${searchdirs[@]}"; do
+        [[ -d "$dir" ]] || continue
+        [[ -e "$dir/$pkg" ]] && results+=("$dir/$pkg")
+    done
+    case ${#results[*]} in
+        0)
+            return 1
+        ;;
+        1)
+            printf '%s\n' "${results[0]}"
+            return 0
+        ;;
+        *)
+            error 'Multiple packages found:'
+            printf '\t%s\n' "${results[@]}" >&2
+            return 1
+        ;;
+    esac
+}
+
+get_pkgbasename() {
+    local name="$1"
+    local rm_pkg=${name%.pkg.tar*}
+    rm_pkg=${rm_pkg%-*}
+    rm_pkg=${rm_pkg%-*}
+    rm_pkg=${rm_pkg%-*}
+    printf "%s\n" "$rm_pkg"
+}
+
+#}}}

lib/pkg/git.sh

@@ -1,35 +1,16 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+#!/hint/bash
+
+#{{{ git
 
 get_local_head(){
-    echo $(git log --pretty=%H ...refs/heads/master^ | head -n 1)
+    git log --pretty=%H ...refs/heads/master^ | head -n 1
 }
 
 get_remote_head(){
-    echo $(git ls-remote origin -h refs/heads/master | cut -f1)
+    git ls-remote origin -h refs/heads/master | cut -f1
 }
 
-clone_tree(){
-    local timer=$(get_timer) url="$1" tree="$2" os="${3:-$(get_osname)}"
-
-    msg "Cloning %s (%s) ..." "$tree" "$os"
-
-    git clone $url/$tree.git
-    show_elapsed_time "${FUNCNAME}" "${timer}"
-}
-
-has_changes(){
+has_changeset(){
     local head_l="$1" head_r="$2"
     if [[ "$head_l" == "$head_r" ]]; then
         msg2 "remote changes: no"
@@ -41,145 +22,11 @@ has_changes(){
 }
 
 pull_tree(){
-    local tree="$1" local_head="$2" os="${3:-$(get_osname)}"
-    local remote_head=$(get_remote_head)
-
-    msg "Checking (%s) (%s)" "${tree}" "$os"
-    if has_changes "${local_head}" "${remote_head}";then
+    local tree="$1" lh="$2" rh
+    rh=$(get_remote_head)
+    if has_changeset "${lh}" "${rh}";then
         git pull origin master
     fi
 }
 
-push_tree(){
-    local tree="$1"
-    msg "Update (%s)" "${tree}"
-    git push origin master
-}
-
-write_jenkinsfile(){
-    local pkg="$1"
-    local jenkins=$pkg/Jenkinsfile
-
-    echo "@Library('artix-ci') import org.artixlinux.RepoPackage" > $jenkins
-    echo '' >> $jenkins
-    echo 'PackagePipeline(new RepoPackage(this))' >> $jenkins
-    echo '' >> $jenkins
-
-    git add $jenkins
-}
-
-write_agentyaml(){
-    local pkg="$1"
-    local agent=$pkg/.artixlinux/agent.yaml label='master'
-    [[ -d $pkg/.artixlinux ]] || mkdir $pkg/.artixlinux
-
-    echo '%YAML 1.2' > $agent
-    echo '---' >> $agent
-    echo '' >> $agent
-    echo "label: $label" >> $agent
-    echo '' >> $agent
-
-    git add $agent
-}
-
-commit_jenkins_files(){
-    local pkg="$1"
-
-    write_jenkinsfile "$pkg"
-    write_agentyaml "$pkg"
-
-    git commit -m "initial commit"
-}
-
-config_tree(){
-    local tree="$1"
-    cd $tree
-        git config --bool pull.rebase true
-        git config commit.gpgsign true
-        if [[ -n "${GPGKEY}" ]];then
-            git config user.signingkey "${GPGKEY}"
-        else
-            warning "No GPGKEY configured in makepkg.conf!"
-        fi
-    cd ..
-}
-
-# write_gitignore() {
-#     local pkg="$1"
-#     local gitignore=$pkg/.gitignore
-#     echo '# ---> ArchLinuxPackages' > $gitignore
-#     echo '*.tar' >> $gitignore
-#     echo '*.tar.*' >> $gitignore
-#     echo '*.jar' >> $gitignore
-#     echo '*.exe' >> $gitignore
-#     echo '*.msi' >> $gitignore
-#     echo '*.zip' >> $gitignore
-#     echo '*.tgz' >> $gitignore
-#     echo '*.log' >> $gitignore
-#     echo '*.log.*' >> $gitignore
-#     echo '*.sig' >> $gitignore
-#     echo '' >> $gitignore
-#     echo 'pkg/' >> $gitignore
-#     echo 'src/' >> $gitignore
-#     echo '' >> $gitignore
-#     echo '# ---> Archives' >> $gitignore
-#     echo '*.7z' >> $gitignore
-#     echo '*.rar' >> $gitignore
-#     echo '*.gz' >> $gitignore
-#     echo '*.bzip' >> $gitignore
-#     echo '*.bz2' >> $gitignore
-#     echo '*.xz' >> $gitignore
-#     echo '*.lzma' >> $gitignore
-#     echo '*.cab' >> $gitignore
-#     echo '' >> $gitignore
-#     echo '# ---> systemd' >> $gitignore
-#     echo '*.service' >> $gitignore
-#     echo '*.socket' >> $gitignore
-#     echo '*.timer' >> $gitignore
-#     echo '' >> $gitignore
-#     echo '# ---> snap' >> $gitignore
-#     echo '*.snap' >> $gitignore
-#     echo '' >> $gitignore
-#
-#     git add $gitignore
-# }
-#
-# write_readme(){
-#     local pkg="$1"
-#     local readme=$pkg/README.md
-#
-#     echo "# $pkg" > $readme
-#     echo '' >> $readme
-#
-#     git add $readme
-# }
-#
-# subrepo_new2(){
-#     local group="${1:-$GROUP}" team="${2:-$TEAM}"
-#     local dest=${TREE_DIR_ARTIX}/$group/${PACKAGE}/trunk
-#
-#     cd ${TREE_DIR_ARTIX}/$group
-#
-#     local org=$(get_pkg_org "${PACKAGE}")
-#
-#     prepare_dir "$dest"
-#
-#     subrepo_init "${PACKAGE}" "$org"
-#
-#     commit_jenkins_files2 "${PACKAGE}"
-#
-#     subrepo_push "${PACKAGE}"
-#
-#     add_repo_to_team "${PACKAGE}" "$org" "$team"
-# }
-#
-# commit_jenkins_files2(){
-#     local pkg="$1"
-#
-#     write_jenkinsfile "$pkg"
-#     write_agentyaml "$pkg"
-#     write_readme "$pkg"
-#     write_gitignore "$pkg"
-#
-#     git commit -m "initial commit"
-# }
+#}}}

lib/pkg/gitea.sh

@@ -1,57 +1,31 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+#!/hint/bash
 
-create_repo() {
-    local pkg="$1" org="$2"
-    local gitname=$(get_compliant_name "$pkg")
-    local json="{ \"auto_init\": true, \"name\":\"$gitname\", \"gitignores\":\"ArchLinuxPackages\", \"readme\": \"Default\" }"
+#{{{ gitea api
 
-    msg2 "Create package repo [%s] in org (%s)" "${pkg}" "${org}"
+add_team_to_repo() {
+    local name="$1"
+    local org="$2"
+    local team="$3"
+    local url
 
-    curl -s -X POST "${GIT_URL}/api/v1/org/$org/repos?access_token=${GIT_TOKEN}" \
-        -H "accept: application/json" \
-        -H "content-type: application/json" \
-        -d "$json"
+    url="${GIT_URL}/api/v1/repos/$org/$name/teams/$team?access_token=${GIT_TOKEN}"
 
-    echo
+    msg2 "Adding team (%s) to package repo [%s]" "$team" "$name"
+
+    api_put "$url" -H  "accept: application/json"
 }
 
-get_team_id() {
-    local org="$1" team="$2"
-    local id=$(curl -s -X GET "${GIT_URL}/api/v1/orgs/$org/teams/search?q=$team&access_token=${GIT_TOKEN}" \
-        -H  "accept: application/json" | jq '.data[] .id')
-    echo $id
+remove_team_from_repo() {
+    local name="$1"
+    local org="$2"
+    local team="$3"
+    local url
+
+    url="${GIT_URL}/api/v1/repos/$org/$name/teams/$team?access_token=${GIT_TOKEN}"
+
+    msg2 "Removing team (%s) from package repo [%s]" "$team" "$name"
+
+    api_delete "$url" -H  "accept: application/json"
 }
 
-add_repo_to_team() {
-    local pkg="$1" org="$2" team="$3"
-    local id=$(get_team_id "$org" "$team")
-    local gitname=$(get_compliant_name "$pkg")
-
-    msg2 "Adding package repo [%s] to team (%s)" "$gitname" "$team"
-
-    curl -s -X PUT "${GIT_URL}/api/v1/teams/$id/repos/$org/$gitname?access_token=${GIT_TOKEN}" \
-        -H  "accept: application/json"
-}
-
-remove_repo_from_team() {
-    local pkg="$1" org="$2" team="$3"
-    local id=$(get_team_id "$org" "$team")
-    local gitname=$(get_compliant_name "$pkg")
-
-    msg2 "Removing package repo [%s] from team (%s)" "$gitname" "$team"
-
-    curl -s -X DELETE "${GIT_URL}/api/v1/teams/$id/repos/$org/$gitname?access_token=${GIT_TOKEN}" \
-        -H  "accept: application/json"
-}
+#}}}

lib/pkg/jenkins.sh

@@ -0,0 +1,43 @@
+#!/hint/bash
+
+#{{{ jenkins
+
+write_jenkinsfile(){
+    local pkg="$1"
+    local jenkins=$pkg/Jenkinsfile
+
+    printf "@Library('artix-ci') import org.artixlinux.RepoPackage\n" > "$jenkins"
+    {
+    printf '\n'
+    printf 'PackagePipeline(new RepoPackage(this))\n'
+    printf '\n'
+    } >> "$jenkins"
+
+    git add "$jenkins"
+}
+
+write_agentyaml(){
+    local pkg="$1"
+    local agent="$pkg"/.artixlinux/agent.yaml label='master'
+    [[ -d $pkg/.artixlinux ]] || mkdir "$pkg"/.artixlinux
+
+    printf '%s\n' '---' > "$agent"
+    {
+    printf '\n'
+    printf "label: %s\n" "$label"
+    printf '\n'
+    } >> "$agent"
+
+    git add "$agent"
+}
+
+commit_jenkins_files(){
+    local pkg="$1"
+
+    write_jenkinsfile "$pkg"
+    write_agentyaml "$pkg"
+
+    git commit -m "initial ci commit"
+}
+
+#}}}

lib/pkg/repo.sh

@@ -0,0 +1,51 @@
+#!/hint/bash
+
+##{{{ repo
+
+shopt -s extglob
+
+load_valid_names(){
+    local conf
+    conf="${DATADIR}"/valid-names.conf
+    [[ -f "$conf" ]] || return 1
+    # shellcheck source=/usr/share/artools/valid-names.conf
+    [[ -r "$conf" ]] && . "$conf"
+    return 0
+}
+
+set_arch_repos(){
+    local _testing="$1" _staging="$2" _unstable="$3"
+    [[ -z ${valid_names[*]} ]] && load_valid_names
+    ARCH_REPOS=("${stable[@]}")
+    $_testing && ARCH_REPOS+=("${gremlins[@]}")
+    $_staging && ARCH_REPOS+=("${goblins[@]}")
+    $_unstable && ARCH_REPOS+=("${wobble[@]}")
+}
+
+find_repo(){
+    local pkg="$1" pkgarch="${2:-${CARCH}}" repo
+    for r in "${ARCH_REPOS[@]}"; do
+        [[ -f $pkg/repos/$r-$pkgarch/PKGBUILD ]] && repo="$r-$pkgarch"
+        [[ -f $pkg/repos/$r-any/PKGBUILD ]] && repo="$r"-any
+        [[ -f $pkg/$pkgarch/$r/PKGBUILD ]] && repo="$r"
+    done
+    printf "%s\n" "$repo"
+}
+
+find_pkg(){
+    local searchdir="$1" pkg="$2" result
+    result=$(find "$searchdir" -mindepth 2 -maxdepth 2 -type d -name "$pkg")
+    printf "%s\n" "$result"
+}
+
+tree_loop(){
+    local func="$1" pkgs
+    for tree in "${ARTIX_TREE[@]}"; do
+        mapfile -t pkgs < <(find "${TREE_DIR_ARTIX}/$tree" -name "$CARCH" | sort)
+        for p in "${pkgs[@]}"; do
+            "$func" "$p"
+        done
+    done
+}
+
+#}}}

lib/pkg/subrepo.sh

@@ -1,56 +0,0 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-get_pkg_org(){
-    local pkg="$1" org= sub=
-    case ${pkg} in
-        ruby-*) org="packagesRuby" ;;
-        perl-*) org="packagesPerl" ;;
-        python-*|python2-*) org="packagesPython" ;;
-        *) sub=${pkg:0:1}; org="packages${sub^^}" ;;
-    esac
-    echo $org
-}
-
-subrepo_init() {
-    local pkg="$1" org="$2"
-    local gitname=$(get_compliant_name "$pkg")
-    msg2 "Subrepo init (%s)" "$pkg"
-    git subrepo init "$pkg" -r gitea@"${GIT_DOMAIN}":"$org"/"$gitname".git
-}
-
-subrepo_push(){
-    local pkg="$1"
-    msg2 "Subrepo push (%s)" "$pkg"
-    git subrepo push "$pkg" || die "%s push failed" "$pkg"
-}
-
-subrepo_clean(){
-    local pkg="$1"
-    msg2 "Subrepo clean (%s)" "$pkg"
-    git subrepo clean "$pkg"
-}
-
-subrepo_pull(){
-    local pkg="$1"
-    msg2 "Subrepo pull (%s)" "$pkg"
-    git subrepo pull "$pkg"
-}
-
-subrepo_clone(){
-    local pkg="$1" org="$2"
-    local gitname=$(get_compliant_name "$pkg")
-    msg2 "Subrepo clone [%s] from (%s)" "$pkg" "$org/$gitname"
-    git subrepo clone gitea@"${GIT_DOMAIN}":"$org"/"$gitname".git "$pkg"
-}

lib/pkg/table.sh

@@ -0,0 +1,35 @@
+#!/hint/bash
+
+#{{{ table
+
+msg_table_header(){
+    local mesg=$1; shift
+    # shellcheck disable=2059
+    printf "${BLUE} ${mesg} ${ALL_OFF}\n" "$@"
+}
+
+msg_row_yellow(){
+    local mesg=$1; shift
+    # shellcheck disable=2059
+    printf "${YELLOW} ${mesg}${ALL_OFF}\n" "$@"
+}
+
+msg_row_green(){
+    local mesg=$1; shift
+    # shellcheck disable=2059
+    printf "${GREEN} ${mesg}${ALL_OFF}\n" "$@"
+}
+
+msg_row(){
+    local mesg=$1; shift
+    # shellcheck disable=2059
+    printf "${WHITE} ${mesg}${ALL_OFF}\n" "$@"
+}
+
+msg_row_red(){
+    local mesg=$1; shift
+    # shellcheck disable=2059
+    printf "${RED} ${mesg} ${ALL_OFF}\n" "$@"
+}
+
+#}}}

lib/pkg/util.sh

@@ -1,70 +0,0 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-shopt -s extglob
-
-get_compliant_name(){
-    local gitname="$1"
-    case "$gitname" in
-        *+) gitname=${gitname//+/plus}
-    esac
-    echo "$gitname"
-}
-
-set_arch_repos(){
-    local x="$1" y="$2" z="$3"
-    ARCH_REPOS=(core extra community multilib)
-
-    $x && ARCH_REPOS+=(testing community-testing multilib-testing)
-    $y && ARCH_REPOS+=(staging community-staging multilib-staging)
-    $z && ARCH_REPOS+=(gnome-unstable kde-unstable)
-}
-
-find_repo(){
-    local pkg="$1" repo=
-    for r in ${ARCH_REPOS[@]};do
-        [[ -f $pkg/repos/$r-${ARCH}/PKGBUILD ]] && repo=$r-${ARCH}
-        [[ -f $pkg/repos/$r-any/PKGBUILD ]] && repo=$r-any
-    done
-    echo $repo
-}
-
-find_pkg(){
-    local searchdir="$1" pkg="$2"
-    local result=$(find "$searchdir" -mindepth 2 -maxdepth 2 -type d -name "$pkg")
-    echo "$result"
-}
-
-find_cached_pkgfile() {
-    local searchdirs=("$PKGDEST" "$PWD") results=()
-    local pkg="$1"
-    for dir in "${searchdirs[@]}"; do
-        [[ -d "$dir" ]] || continue
-        [[ -e "$dir/$pkg" ]] && results+=("$dir/$pkg")
-    done
-    case ${#results[*]} in
-        0)
-            return 1
-        ;;
-        1)
-            printf '%s\n' "${results[0]}"
-            return 0
-        ;;
-        *)
-            error 'Multiple packages found:'
-            printf '\t%s\n' "${results[@]}" >&2
-            return 1
-        ;;
-    esac
-}

lib/util-base.sh

@@ -0,0 +1,41 @@
+#!/hint/bash
+
+#{{{ base conf
+
+DATADIR=${DATADIR:-'@datadir@/artools'}
+SYSCONFDIR=${SYSCONFDIR:-'@sysconfdir@/artools'}
+
+if [[ -n $SUDO_USER ]]; then
+    eval "USER_HOME=~$SUDO_USER"
+else
+    USER_HOME=$HOME
+fi
+
+USER_CONF_DIR="${XDG_CONFIG_HOME:-$USER_HOME/.config}/artools"
+
+prepare_dir(){
+    [[ ! -d $1 ]] && mkdir -p "$1"
+}
+
+load_base_config(){
+
+    local conf="$1/artools-base.conf"
+
+    [[ -f "$conf" ]] || return 1
+
+    # shellcheck source=/etc/artools/artools-base.conf
+    [[ -r "$conf" ]] && . "$conf"
+
+    CHROOTS_DIR=${CHROOTS_DIR:-'/var/lib/artools'}
+
+    WORKSPACE_DIR=${WORKSPACE_DIR:-"${USER_HOME}/artools-workspace"}
+
+    return 0
+}
+
+#}}}
+
+load_base_config "${USER_CONF_DIR}" || load_base_config "${SYSCONFDIR}"
+
+prepare_dir "${WORKSPACE_DIR}"
+prepare_dir "${USER_CONF_DIR}"

lib/util-base.sh.in

@@ -1,59 +0,0 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-CHROOTVERSION=@chroot_version@
-
-. @datadir@/makepkg/util.sh
-
-DATADIR=${DATADIR:-'@datadir@/artools'}
-LIBDIR=${LIBDIR:-'@libdir@/artools'}
-SYSCONFDIR=${SYSCONFDIR:-'@sysconfdir@/artools'}
-
-OWNER=${SUDO_USER:-$USER}
-
-if [[ -n $SUDO_USER ]]; then
-    eval "USER_HOME=~$SUDO_USER"
-else
-    USER_HOME=$HOME
-fi
-
-USER_CONF_DIR="${XDG_CONFIG_HOME:-$USER_HOME/.config}/artools"
-
-for baselib in ${LIBDIR}/base/*.sh; do
-    . $baselib
-done
-
-prepare_artools(){
-    prepare_dir "${WORKSPACE_DIR}"
-    prepare_dir "${USER_CONF_DIR}"
-}
-
-load_base_config(){
-
-    local conf="$1/artools-base.conf"
-
-    [[ -f "$conf" ]] || return 1
-
-    [[ -r "$conf" ]] && . "$conf"
-
-    ARCH=$(uname -m)
-
-    CHROOTS_DIR=${CHROOTS_DIR:-'/var/lib/artools'}
-
-    WORKSPACE_DIR=${WORKSPACE_DIR:-"/home/${OWNER}/artools-workspace"}
-
-    return 0
-}
-
-load_base_config "${USER_CONF_DIR}" || load_base_config "${SYSCONFDIR}"

lib/util-iso.sh

@@ -0,0 +1,41 @@
+#!/hint/bash
+
+#{{{ iso conf
+
+load_iso_config(){
+
+    local conf="$1/artools-iso.conf"
+
+    [[ -f "$conf" ]] || return 1
+
+    # shellcheck source=/etc/artools/artools-iso.conf
+    [[ -r "$conf" ]] && . "$conf"
+
+    ISO_POOL=${ISO_POOL:-"${WORKSPACE_DIR}/iso"}
+
+    ISO_VERSION=${ISO_VERSION:-"$(date +%Y%m%d)"}
+
+    INITSYS=${INITSYS:-'openrc'}
+
+    GPG_KEY=${GPG_KEY:-''}
+
+    COMPRESSION="${COMPRESSION:-zstd}"
+
+    COMPRESSION_LEVEL="${COMPRESSION_LEVEL:-15}"
+
+    if [[ -z "${COMPRESSION_ARGS[*]}" ]]; then
+        COMPRESSION_ARGS=(-Xcompression-level "${COMPRESSION_LEVEL}")
+    fi
+
+    if [[ "${COMPRESSION}" == 'xz' ]]; then
+        COMPRESSION_ARGS=(-Xbcj x86)
+    fi
+
+    return 0
+}
+
+#}}}
+
+load_iso_config "${USER_CONF_DIR}" || load_iso_config "${SYSCONFDIR}"
+
+prepare_dir "${ISO_POOL}"

lib/util-iso.sh.in

@@ -1,54 +0,0 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-. @libdir@/artools/util-base.sh
-
-for isolib in ${LIBDIR}/iso/*.sh; do
-    . $isolib
-done
-
-load_iso_config(){
-
-    local conf="$1/artools-iso.conf"
-
-    [[ -f "$conf" ]] || return 1
-
-    [[ -r "$conf" ]] && . "$conf"
-
-    CHROOTS_ISO="${CHROOTS_DIR}/buildiso"
-
-    ISO_POOL=${ISO_POOL:-"${WORKSPACE_DIR}/iso"}
-
-    PROFILE='base'
-
-    ISO_VERSION=${ISO_VERSION:-"$(date +%Y%m%d)"}
-
-    INITSYS=${INITSYS:-'openrc'}
-
-    GPG_KEY=${GPG_KEY:-''}
-
-    UPLIMIT=${UPLIMIT:-1000}
-
-    FILE_HOST="download.${DOMAIN}"
-
-    FILE_HOME=${FILE_HOME:-'/srv/iso'}
-
-    FILE_PORT=${FILE_PORT:-65432}
-
-    ACCOUNT=${ACCOUNT:-'naughtyISOuploader'}
-
-    return 0
-}
-
-load_iso_config "${USER_CONF_DIR}" || load_iso_config "${SYSCONFDIR}"

lib/util-pkg.sh

@@ -0,0 +1,49 @@
+#!/hint/bash
+
+#{{{ pkg conf
+
+load_pkg_config(){
+
+    local conf="$1/artools-pkg.conf"
+
+    [[ -f "$conf" ]] || return 1
+
+    # shellcheck source=/etc/artools/artools-pkg.conf
+    [[ -r "$conf" ]] && . "$conf"
+
+    local git_domain="gitea.artixlinux.org"
+
+    GIT_URL=${GIT_URL:-"https://${git_domain}"}
+
+    GIT_SSH=${GIT_SSH:-"gitea@${git_domain}"}
+
+    GIT_TOKEN=${GIT_TOKEN:-''}
+
+    TREE_DIR_ARTIX=${TREE_DIR_ARTIX:-"${WORKSPACE_DIR}/artixlinux"}
+
+    [[ -z ${ARTIX_TREE[*]} ]] && \
+    ARTIX_TREE=(main initsys desktop addons lib32)
+
+    TREE_DIR_ARCH=${TREE_DIR_ARCH:-"${WORKSPACE_DIR}/archlinux"}
+
+    [[ -z ${ARCH_TREE[*]} ]] && \
+    ARCH_TREE=(svntogit-{packages,community})
+
+    REPOS_ROOT=${REPOS_ROOT:-"${WORKSPACE_DIR}/repos"}
+
+    REPOS_MIRROR=${REPOS_MIRROR:-'http://mirror1.artixlinux.org/repos'}
+
+    HOST_TREE_ARCH=${HOST_TREE_ARCH:-'https://github.com/archlinux'}
+
+    DBEXT=${DBEXT:-'gz'}
+
+    return 0
+}
+
+#}}}
+
+load_pkg_config "${USER_CONF_DIR}" || load_pkg_config "${SYSCONFDIR}"
+
+prepare_dir "${REPOS_ROOT}"
+prepare_dir "${TREE_DIR_ARTIX}"
+prepare_dir "${TREE_DIR_ARCH}"

lib/util-pkg.sh.in

@@ -1,90 +0,0 @@
-#!/bin/bash
-#
-# Copyright (C) 2018-19 artoo@artixlinux.org
-# Copyright (C) 2018 Artix Linux Developers
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-. @libdir@/artools/util-base.sh
-
-for pkglib in ${LIBDIR}/pkg/*.sh; do
-    . $pkglib
-done
-
-load_pkg_config(){
-
-    local conf="$1/artools-pkg.conf"
-
-    [[ -f "$conf" ]] || return 1
-
-    [[ -r "$conf" ]] && . "$conf"
-
-    DOMAIN='artixlinux.org'
-
-    GIT_DOMAIN="gitea.${DOMAIN}"
-
-    GIT_URL="https://${GIT_DOMAIN}"
-
-    GIT_TOKEN=${GIT_TOKEN:-''}
-
-    TREE_DIR_ARTIX=${TREE_DIR_ARTIX:-"${WORKSPACE_DIR}/artixlinux"}
-
-    [[ -z ${TREE_NAMES_ARTIX[@]} ]] && \
-    TREE_NAMES_ARTIX=(
-            packages
-            community
-            packages-kernel
-            packages-net
-            packages-gfx
-            packages-openrc
-            packages-runit
-            packages-s6
-            packages-xorg
-            packages-python
-            packages-perl
-            packages-java
-            packages-qt5
-            packages-devel
-            packages-ruby
-            packages-gtk
-            packages-gnome
-            packages-cinnamon
-            packages-lxqt
-            packages-mate
-            packages-kde
-            packages-xfce
-            packages-wm
-#             packages-haskell
-    )
-
-    HOST_TREE_ARTIX=${HOST_TREE_ARTIX:-"gitea@${GIT_DOMAIN}:artixlinux"}
-
-    TREE_DIR_ARCH=${TREE_DIR_ARCH:-"${WORKSPACE_DIR}/archlinux"}
-
-    TREE_NAMES_ARCH=(packages community)
-
-    HOST_TREE_ARCH=${HOST_TREE_ARCH:-'git://git.archlinux.org/svntogit'}
-
-    CHROOTS_PKG="${CHROOTS_DIR}/buildpkg"
-
-    REPOS_ROOT=${REPOS_ROOT:-"${WORKSPACE_DIR}/repos"}
-
-    REPOS_MIRROR=${REPOS_MIRROR:-'http://mirror1.artixlinux.org/repos'}
-
-    DBEXT=${DBEXT:-'xz'}
-
-    LINKSDBEXT=${LINKSDBEXT:-"links.tar.${DBEXT}"}
-
-    PKGDBEXT=${PKGDBEXT:-"db.tar.${DBEXT}"}
-
-    return 0
-}
-
-load_pkg_config "${USER_CONF_DIR}" || load_pkg_config "${SYSCONFDIR}"