buildiso: write defaultBundle map for s6 cal

Reviewed-on: artix/artools#61
Co-authored-by: artoo <artoo@artixlinux.org>
Co-committed-by: artoo <artoo@artixlinux.org>

Makefile

@@ -1,11 +1,10 @@
-VERSION=0.24
+V=0.26
 
 TOOLS = artools
 PREFIX ?= /usr
 SYSCONFDIR = /etc
 BINDIR = $(PREFIX)/bin
 DATADIR = $(PREFIX)/share
-CPIODIR = $(SYSCONFDIR)/initcpio
 
 BASE_CONF = \
 	data/conf/artools-base.conf
@@ -23,6 +22,8 @@ BASE_DATA = \
 PKG_CONF = \
 	data/conf/artools-pkg.conf
 
+SETARCH_ALIASES = \
+
 PKG_BIN = \
 	bin/pkg/buildpkg \
 	bin/pkg/deploypkg \
@@ -88,9 +89,6 @@ PKG_DATA = \
 	data/pacman/makepkg.conf \
 	data/valid-names.conf
 
-PROTO = \
-	$(wildcard data/proto/*.proto)
-
 PATCHES = \
 	$(wildcard data/patches/*.patch)
 
@@ -109,7 +107,7 @@ FILEMODE = -m0644
 MODE =  -m0755
 LN = ln -sf
 RM = rm -f
-M4 = m4 -P
+M4 = m4 -P --define=m4_artools_pkg_version=$V
 CHMODAW = chmod a-w
 CHMODX = chmod +x
 
@@ -141,6 +139,9 @@ install_base:
 	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)
 	install $(FILEMODE) $(BASE_DATA) $(DESTDIR)$(DATADIR)/$(TOOLS)
 
+	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)/setarch-aliases.d
+	for a in ${SETARCH_ALIASES}; do install $(FILEMODE) setarch-aliases.d/$$a $(DESTDIR)$(DATADIR)/$(TOOLS)/setarch-aliases.d; done
+
 install_pkg:
 	install $(DIRMODE) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
 	install $(FILEMODE) $(PKG_CONF) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
@@ -164,13 +165,7 @@ install_pkg:
 	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)/patches
 	install $(FILEMODE) $(PATCHES) $(DESTDIR)$(DATADIR)/$(TOOLS)/patches
 
-	install $(DIRMODE) $(DESTDIR)$(DATADIR)/$(TOOLS)/proto
-	install $(FILEMODE) $(PROTO) $(DESTDIR)$(DATADIR)/$(TOOLS)/proto
-
-install_cpio:
-	+make CPIODIR=$(CPIODIR) DESTDIR=$(DESTDIR) -C initcpio install
-
-install_iso: install_cpio
+install_iso:
 	install $(DIRMODE) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
 	install $(FILEMODE) $(ISO_CONF) $(DESTDIR)$(SYSCONFDIR)/$(TOOLS)
 

README.md

@@ -30,7 +30,6 @@ artools
   * dosfstools
   * libisoburn
   * squashfs-tools
-  * mkinitcpio
   * grub
 
 #### Configuration

bin/base/chroot-run.in

@@ -85,14 +85,12 @@ shift 1
 
 [[ -z $working_dir ]] && die 'Please specify a working directory.'
 
-pacconf_cmd=$(command -v pacman-conf || command -v pacconf)
-
 if (( ${#cache_dirs[@]} == 0 )); then
-    mapfile -t cache_dirs < <($pacconf_cmd --config "${pac_conf:-$working_dir/etc/pacman.conf}" CacheDir)
+    mapfile -t cache_dirs < <(pacman-conf --config "${pac_conf:-$working_dir/etc/pacman.conf}" CacheDir)
 fi
 
 # shellcheck disable=2016
-host_mirrors=($("$pacconf_cmd" --repo world Server 2> /dev/null | sed -r 's#(.*/)world/os/.*#\1$repo/os/$arch#'))
+host_mirrors=($(pacman-conf --repo world Server 2> /dev/null | sed -r 's#(.*/)world/os/.*#\1$repo/os/$arch#'))
 
 for host_mirror in "${host_mirrors[@]}"; do
     if [[ $host_mirror == *file://* ]]; then
@@ -104,7 +102,7 @@ done
 
 while read -r line; do
     # shellcheck disable=2016
-    mapfile -t lines < <($pacconf_cmd --config "${pac_conf:-$working_dir/etc/pacman.conf}" \
+    mapfile -t lines < <(pacman-conf --config "${pac_conf:-$working_dir/etc/pacman.conf}" \
         --repo "$line" Server | sed -r 's#(.*/)[^/]+/os/.+#\1#')
     for line in "${lines[@]}"; do
         if [[ $line = file://* ]]; then
@@ -112,7 +110,7 @@ while read -r line; do
             in_array "$line" "${cache_dirs[@]}" || cache_dirs+=("$line")
         fi
     done
-done < <("$pacconf_cmd" --config "${pac_conf:-$working_dir/etc/pacman.conf}" --repo-list)
+done < <(pacman-conf --config "${pac_conf:-$working_dir/etc/pacman.conf}" --repo-list)
 
 copy_hostconf () {
     unshare --fork --pid gpg --homedir "$working_dir"/etc/pacman.d/gnupg/ --no-permission-warning --quiet --batch --import --import-options import-local-sigs "$(pacman-conf GpgDir)"/pubring.gpg >/dev/null 2>&1
@@ -168,7 +166,13 @@ eval "$(grep '^CARCH=' "$working_dir/etc/makepkg.conf")"
 
 [[ -z $nosetarch ]] || unset CARCH
 
-${CARCH:+setarch "$CARCH"} chroot "${working_dir}" "$@"
+if [[ -f "@datadir@/artools/setarch-aliases.d/${CARCH}" ]]; then
+	read -r set_arch < "@datadir@/artools/setarch-aliases.d/${CARCH}"
+else
+	set_arch="${CARCH}"
+fi
+
+${CARCH:+setarch "${set_arch}"} chroot "${working_dir}" "$@"
 
 ret=$?
 

bin/base/mkchroot.in

@@ -64,10 +64,8 @@ shift 1
 
 [[ -z $working_dir ]] && die 'Please specify a working directory.'
 
-pacconf_cmd=$(command -v pacman-conf || command -v pacconf)
-
 if (( ${#cache_dirs[@]} == 0 )); then
-	mapfile -t cache_dirs < <($pacconf_cmd CacheDir)
+	mapfile -t cache_dirs < <(pacman-conf CacheDir)
 fi
 
 umask 0022

bin/iso/buildiso.in

@@ -138,7 +138,7 @@ make_bootfs() {
         if "${use_dracut}"; then
             prepare_initramfs_dracut "${bootfs}"
         else
-            prepare_initramfs "${bootfs}"
+            prepare_initramfs_mkinitcpio "${bootfs}"
         fi
 
         umount_overlayfs
@@ -161,7 +161,7 @@ make_grub(){
         if ${use_dracut}; then
             configure_grub_dracut
         else
-            configure_grub
+            configure_grub_mkinitcpio
         fi
 
         : > "${work_dir}"/grub.lock
@@ -207,6 +207,10 @@ prepare_build(){
     live_dir=/LiveOS
 
     mnt_dir=${chroots_iso}/${profile}/mnt
+
+    if [[ -n "${GPG_KEY}" ]]; then
+        ${use_dracut} || export_gpg_publickey
+    fi
 }
 
 display_settings(){
@@ -217,6 +221,8 @@ display_settings(){
 
     msg "ISO SETTINGS:"
     msg2 "ISO_VERSION: %s" "${ISO_VERSION}"
+    msg2 "COMPRESSION: %s" "${COMPRESSION}"
+    [[ "${COMPRESSION}" == 'zstd' ]] && msg2 "COMPRESSION_LEVEL: %s" "${COMPRESSION_LEVEL}"
 
     msg "BUILD:"
     show_profile
@@ -328,7 +334,7 @@ usage() {
     echo '    -i <name>          Init system to use'
     echo "                       [default: ${INITSYS}]"
     echo '    -g <key>           The gpg key for img signing'
-    echo "                       [default: ${GPG_KEY}]"
+    echo "                       [default: none]"
     echo '    -m                 Set SquashFS image mode to persistence'
     echo '    -c                 Disable clean work dir'
     echo '    -x                 Build chroot only'

bin/pkg/buildpkg.in

@@ -72,6 +72,12 @@ get_pacman_conf "${repo}"
 
 get_makepkg_conf
 
+if [[ -f "${DATADIR}/setarch-aliases.d/${arch}" ]]; then
+	read -r set_arch < "${DATADIR}/setarch-aliases.d/${arch}"
+else
+	set_arch="${arch}"
+fi
+
 check_root SOURCE_DATE_EPOCH,SRCDEST,SRCPKGDEST,PKGDEST,LOGDEST,MAKEFLAGS,PACKAGER,GNUPGHOME
 
 mkchrootpkg_args+=("${@:$OPTIND}")
@@ -92,7 +98,7 @@ if ${create_first} || [[ ! -d "${chroots_pkg}/${repo}-${arch}" ]];then
 
     rm -rf --one-file-system "${chroots_pkg}/${repo}-${arch}"
     (umask 0022; mkdir -p "${chroots_pkg}/${repo}-${arch}")
-    setarch "${arch}" mkchroot \
+    setarch "${set_arch}" mkchroot \
         -C "${pacman_conf}" \
         -M "${makepkg_conf}" \
         "${chroots_pkg}/${repo}-${arch}/root" \

bin/pkg/buildtree.in

@@ -117,6 +117,7 @@ patch_pkg(){
     local pkgpath="$1"
     local pkg=${pkgpath%/*}
     pkg=${pkg##*/}
+    sed -e 's|arch-meson|artix-meson|' -i "$pkgpath"/PKGBUILD
     case $pkg in
         glibc)
             msg2 "Patching %s" "$pkg"

bin/pkg/checkrepo.in

@@ -18,19 +18,42 @@ m4_include(lib/base/message.sh)
 m4_include(lib/pkg/repo.sh)
 m4_include(lib/pkg/table.sh)
 
+#{{{ db libs
+
+extract_db() {
+    local u="$1" cdir="$2"
+    rm -rf "$cdir"
+    mkdir -p "$cdir"
+    msg2 "%s" "${cdir##*/}"
+    curl -L -s "$u" | bsdtar -xf - -C "$cdir"
+}
+
+update_db_cache(){
+    msg "Updating database cache ..."
+    local cachedir url
+    for repo in "${searchrepos[@]}"; do
+        cachedir=${db_cache_dir}/linksdb/$repo
+        url=${REPOS_MIRROR}/$repo/os/${CARCH}/$repo.${linksdb_ext}
+        extract_db "$url" "$cachedir"
+    done
+    msg "Done"
+}
+
+#}}}
+
 #{{{ sogrep
 
 query_db() {
     for repo in "${searchrepos[@]}"; do
         local db
-        db=${db_cache_dir}/${linksdb_ext}/${CARCH}/${repo}/
+        db=${db_cache_dir}/linksdb/$repo/
         if [[ -d ${db} ]]; then
             while read -rd '' pkg; do
                 read -r match
                 pkg=${pkg#${db}}
                 pkg="${pkg%/*}"
-                msg_row "${tableQ}" "${repo}" "${pkg}" "${match}"
-            done < <(grep -rZ "${library}" "${db}") | sort -u
+                msg_row "${tableQ}" "$repo" "$pkg" "${match}"
+            done < <(grep -rZ "$library" "$db") | sort -u
         fi
     done
 }
@@ -41,7 +64,7 @@ query_db() {
 
 is_db_entry() {
     local pkgname="$1" repo="${REPOS[$2]}" entry
-    entry=${db_cache_dir}/${linksdb_ext}/${CARCH}/$repo/$pkgname
+    entry=${db_cache_dir}/linksdb/$repo/$pkgname
 
     if [[ -d "$entry" ]];then
         return 0
@@ -50,26 +73,74 @@ is_db_entry() {
 }
 
 check_db(){
-    local pkgpath="${1%/*}"
+    local pkgpath="${1}"
 
     for repo in "${!REPOS[@]}"; do
+
         local pkgbuild artixver
-        [[ -f $pkgpath/$CARCH/$repo/PKGBUILD ]] && pkgbuild=$pkgpath/$CARCH/$repo/PKGBUILD
-        [[ -f $pkgpath/repos/$repo-$CARCH/PKGBUILD ]] && pkgbuild=$pkgpath/repos/$repo-$CARCH/PKGBUILD
-        [[ -f $pkgpath/repos/$repo-any/PKGBUILD ]] && pkgbuild=$pkgpath/repos/$repo-any/PKGBUILD
+        if [[ -f $pkgpath/$repo/PKGBUILD ]]; then
+            pkgbuild=$pkgpath/$repo/PKGBUILD
 
-        # shellcheck disable=1090
-        . "$pkgbuild" 2>/dev/null
-        artixver=$(get_full_version)
+            # shellcheck disable=1090
+            . "$pkgbuild" 2>/dev/null
+            artixver=$(get_full_version)
+            for name in "${pkgname[@]}"; do
+                if ! is_db_entry "$name-$artixver" "$repo"; then
+                    msg_row_red "${tableU}" "$repo" "$name" "$artixver" "false"
+                else
+                    ${all_db} && msg_row "${tableU}" "$repo" "$name" "$artixver" "true"
+                fi
+            done
+            unset artixver pkgbuild pkgver epoch pkgname pkgbase
+        fi
+    done
+}
 
-        for name in "${pkgname[@]}"; do
-            if ! is_db_entry "$name-$artixver" "$repo"; then
-                msg_row_red "${tableU}" "$repo" "$name" "$artixver" "false"
-            else
-                ${all_db} && msg_row "${tableU}" "$repo" "$name" "$artixver" "true"
+#}}}
+
+# {{{ check obsolete
+
+show_obsolete_table() {
+    local arch_mirror='https://mirror.f4st.host/archlinux'
+
+    local arch_repo artix_repo artix_db arch_db url
+    arch_repo="${searchrepos[@]}"
+    artix_repo="${REPOS[$arch_repo]}"
+
+    artix_db="${db_cache_dir}/artixdb/${artix_repo}"
+    arch_db="${db_cache_dir}/archdb/${arch_repo}"
+
+    msg "Updating database cache ..."
+    url=${REPOS_MIRROR}/${artix_repo}/os/$CARCH/${artix_repo}.${db_ext}
+    extract_db "$url" "${artix_db}"
+
+    url=${arch_mirror}/${arch_repo}/os/$CARCH/${arch_repo}.${db_ext}
+    extract_db "$url" "${arch_db}"
+    msg "Done"
+
+    msg_table_header "${tableQ}" "Repo" "Package" "Obsolete"
+    for p in "${artix_db}"/*; do
+        local pkg rel
+        pkg=${p##*/}
+        rel=${pkg##*-}
+        rel=${rel%.*}
+        pkg=${pkg%-*}
+        local p="$pkg-$rel"
+
+        if [[ "$p" != *openrc* ]] && [[ "$p" != *runit* ]] \
+        && [[ "$p" != *s6* ]] && [[ "$p" != *suite66* ]] \
+        && [[ "$p" != *udev* ]] && [[ "$p" != *elogind* ]] \
+        && [[ "$p" != *sysusers* ]] && [[ "$p" != *tmpfiles* ]] \
+        && [[ "$p" != *execline* ]] && [[ "$p" != *skalibs* ]] \
+        && [[ "$p" != *netifrc* ]] && [[ "$p" != *bootlogd* ]] \
+        && [[ "$p" != *pam_rundir* ]] && [[ "$p" != *artools* ]] \
+        && [[ "$p" != *archlinux* ]] && [[ "$p" != *iso-profiles* ]] \
+        && [[ "$p" != *calamares* ]] && [[ "$p" != *iso-initcpio* ]] \
+        && [[ "$p" != *dinit* ]] && [[ "$p" != *artix* ]] && [[ "$p" != *blocaled* ]]; then
+            if [[ ! -d "${arch_db}/$p" ]]; then
+                msg_row "${tableQ}" "${artix_repo}" "$p" "true"
             fi
-        done
-        unset artixver pkgbuild pkgver epoch pkgname pkgbase
+        fi
     done
 }
 
@@ -85,23 +156,10 @@ show_db_table(){
     tree_loop check_db
 }
 
-update_db_cache(){
-    msg "Updating database cache ..."
-    local cachedir url
-    for repo in "${searchrepos[@]}"; do
-        cachedir=${db_cache_dir}/${linksdb_ext}/${CARCH}/${repo}
-        rm -rf "$cachedir"
-        mkdir -p "$cachedir"
-        msg2 "%s" "$repo"
-        url=${REPOS_MIRROR}/${repo}/os/${CARCH}/${repo}.${linksdb_ext}
-        curl -L -s "$url" | bsdtar -xf - -C "$cachedir"
-    done
-    msg "Done"
-}
-
 db_cache_dir="${XDG_CACHE_HOME:-$USER_HOME/.cache}/artools"
 
 linksdb_ext="links.tar.${DBEXT}"
+db_ext="db.tar.${DBEXT}"
 
 load_makepkg_config
 
@@ -109,9 +167,10 @@ sync=false
 check=false
 query=false
 all_db=false
+obsolete=false
 
 readonly tableU="%-20s %-35s %-30s %-10s"
-readonly tableQ="%-20s %-45s %s"
+readonly tableQ="%-20s %-55s %s"
 
 load_valid_names
 
@@ -156,6 +215,7 @@ usage() {
     echo "    -s            Sync repo databases"
     echo '    -c            Check repos'
     echo '    -a            Show repo db (-c)'
+    echo '    -o            Check for obsolete packages'
     echo "    -q            Query repo databases for so libs"
     echo '    -h            This help'
     echo ''
@@ -163,7 +223,7 @@ usage() {
     exit "$1"
 }
 
-opts='r:qcsah'
+opts='r:qcsaoh'
 
 while getopts "${opts}" arg; do
     case "${arg}" in
@@ -172,6 +232,7 @@ while getopts "${opts}" arg; do
         c) check=true ;;
         a) all_db=true ;;
         q) query=true ;;
+        o) obsolete=true ;;
         h|?) usage 0 ;;
         *) echo "invalid argument '${arg}'"; usage 1 ;;
     esac
@@ -186,3 +247,5 @@ ${sync} && update_db_cache
 ${check} && show_db_table
 
 ${query} && show_lib_table
+
+${obsolete} && show_obsolete_table

bin/pkg/commitpkg.in

@@ -46,33 +46,6 @@ subrepo_pull(){
     git subrepo pull "$pkg"
 }
 
-prepare_commit(){
-    # create new layout, copy & remove repos
-    if [[ -d repos ]]; then
-        msg2 "Switching to new layout ..."
-        [[ ! -d "$CARCH" ]] && mkdir "$CARCH"
-
-        for r in repos/*; do
-            local name noarch
-            name=${r#*/}
-            noarch=${name%-*}
-            mkdir "$CARCH/${noarch}"
-            cp repos/"${name}"/* "$CARCH/${noarch}/"
-            git add "$CARCH/${noarch}"
-        done
-
-        git rm -r repos
-        git commit -m "switch to new repo layout"
-        msg2 "Done switch"
-    fi
-
-    if [[ $action == 'add' ]] || [[ $action == 'move' ]] ;then
-        [[ -d "$CARCH/${repo_dest}" ]] && git rm -r "$CARCH/${repo_dest}"
-        [[ ! -d "$CARCH" ]] && mkdir "$CARCH"
-        [[ ! -d "$CARCH/${repo_dest}" ]] && mkdir "$CARCH/${repo_dest}"
-    fi
-}
-
 check_rebuild(){
     if [[ -d "$CARCH"/"${valid_names[10]}" ]] \
     && [[ "${repo_dest}" == "${valid_names[7]}" ]]; then
@@ -86,14 +59,12 @@ check_rebuild(){
 }
 
 check_team(){
-    if [[ "${repo_src}" == "${valid_names[0]}" \
-        && "${repo_dest}" == "${valid_names[1]}" ]] || \
-        [[ "${repo_src}" == "${valid_names[1]}" \
-        && "${repo_dest}" == "${valid_names[0]}" ]] || \
-        [[ "${repo_src}" == "${valid_names[1]}" \
-        && "${repo_dest}" == "${valid_names[2]}" ]] || \
-        [[ "${repo_src}" == "${valid_names[2]}" \
-        && "${repo_dest}" == "${valid_names[1]}" ]] ;then
+    if [[ "${repo_src}" == "${valid_names[0]}" && "${repo_dest}" == "${valid_names[1]}" ]] || \
+        [[ "${repo_src}" == "${valid_names[1]}" && "${repo_dest}" == "${valid_names[0]}" ]] || \
+        [[ "${repo_src}" == "${valid_names[1]}" && "${repo_dest}" == "${valid_names[2]}" ]] || \
+        [[ "${repo_src}" == "${valid_names[2]}" && "${repo_dest}" == "${valid_names[1]}" ]] || \
+        [[ "${repo_src}" == "${valid_names[0]}" && "${repo_dest}" == "${valid_names[2]}" ]] || \
+        [[ "${repo_src}" == "${valid_names[2]}" && "${repo_dest}" == "${valid_names[0]}" ]]; then
 
         local org gitname
         org=$(get_pkg_org "${package}")
@@ -106,11 +77,6 @@ check_team(){
 path_config() {
     [[ "${repo_src}" != 'trunk' ]] && pkgbuild="$CARCH/${repo_src}"/PKGBUILD
 
-    if [[ ! -f "$pkgbuild" ]]; then
-        pkgbuild=repos/"${repo_src}-${CARCH}"/PKGBUILD
-        [[ -f repos/"${repo_src}"-any/PKGBUILD ]] && pkgbuild=repos/"${repo_src}"-any/PKGBUILD
-    fi
-
     # shellcheck disable=1090
     . "$pkgbuild"
 }
@@ -132,7 +98,6 @@ commit_pkg() {
         if [[ "${repo_src}" == 'trunk' ]];then
             git rm -r trunk
         else
-            prepare_commit
             git rm -r "$CARCH/${repo_src}"
         fi
     else
@@ -146,11 +111,15 @@ commit_pkg() {
 
 repo_commit_pkg() {
     local commit_msg
+
+    [[ -d "$CARCH/${repo_dest}" ]] && git rm -r "$CARCH/${repo_dest}"
+    [[ ! -d "$CARCH" ]] && mkdir "$CARCH"
+    [[ ! -d "$CARCH/${repo_dest}" ]] && mkdir "$CARCH/${repo_dest}"
+
     if [[ "${repo_src}" == 'trunk' ]]; then
         action='add'
         commit_msg=$(get_repo_commit_msg)
         msg "Action: %s" "$commit_msg"
-        prepare_commit
         check_rebuild
         cp trunk/* "$CARCH/${repo_dest}"/
     else
@@ -158,7 +127,6 @@ repo_commit_pkg() {
         [[ ! -f $pkgbuild ]] && die "%s does not exist!" "$pkgbuild"
         commit_msg=$(get_repo_commit_msg)
         msg "Action: %s" "$commit_msg"
-        prepare_commit
         cp "$CARCH/${repo_src}"/* "$CARCH/${repo_dest}"/
         git rm -r "$CARCH/${repo_src}"
     fi

bin/pkg/comparepkg.in

@@ -52,6 +52,9 @@ compare_m(){
 
 compare_u(){
     if [ "$result" -eq -1 ];then
+#         local arel=${archver##*-} brel=${artixver##*-}
+#         local reldiff
+#         reldiff=$(( $arel-${brel%.*} ))
         msg_row_red "${table}" "${a}" "${b}" "$pkg" "$archver" "$artixver" "${group#*-}"
         write_list "${a}:$pkg" pkg_upgrades
     fi

bin/pkg/links-add.in

@@ -35,7 +35,6 @@ REPO_DB_PREFIX=
 REPO_DB_SUFFIX=
 LOCKFILE=
 CLEAN_LOCK=0
-PREVENT_DOWNGRADE=0
 
 # ensure we have a sane umask set
 umask 0022
@@ -53,7 +52,6 @@ Multiple packages to add can be specified on the command line.\n"
         printf -- "\n"
         printf -- "Options:\n"
         printf -- "  -n, --new         only add packages that are not already in the database\n"
-        printf -- "  -p, --prevent-downgrade  do not add package to database if a newer version is already present\n"
     elif [[ $cmd == "links-remove" ]] ; then
         printf -- "Usage: links-remove [options] <path-to-db> <packagename> ...\n"
         printf -- "\n"
@@ -193,18 +191,6 @@ db_write_entry() {
         if (( ONLYADDNEW )); then
             return 0
         fi
-    else
-        pkgentry=$(find_pkgentry "$pkgname")
-        if [[ -n $pkgentry ]]; then
-
-            local version=$(sed -n '/^%VERSION%$/ {n;p;q}' "$pkgentry/desc")
-            if (( $(vercmp "$version" "$pkgver") > 0 )); then
-                warning "A newer version for '%s' is already present in database" "$pkgname"
-                if (( PREVENT_DOWNGRADE )); then
-                    return 0
-                fi
-            fi
-        fi
     fi
 
     # remove an existing entry if it exists, ignore failures
@@ -467,7 +453,6 @@ while (( $# )); do
         -s|--sign) SIGN=1 ;;
         -k|--key) KEY=1 ; shift; GPGKEY=$1 ;;
         -v|--verify) VERIFY=1 ;;
-        -p|--prevent-downgrade) PREVENT_DOWNGRADE=1 ;;
         *) args+=("$1") ;;
     esac
     shift

bin/pkg/mkchrootpkg.in

@@ -15,6 +15,9 @@
 m4_include(lib/base/message.sh)
 m4_include(lib/base/chroot.sh)
 
+export BUILDTOOL=artools-pkg
+export BUILDTOOLVER=m4_artools_pkg_version
+
 shopt -s nullglob
 
 default_makepkg_args=(--syncdeps --noconfirm --log --holdver --skipinteg)
@@ -193,6 +196,8 @@ EOF
         printf '#!/bin/bash\n'
         declare -f _chrootbuild
         declare -p SOURCE_DATE_EPOCH 2>/dev/null || true
+        declare -p BUILDTOOL 2>/dev/null
+		declare -p BUILDTOOLVER 2>/dev/null
         printf '_chrootbuild "$@" || exit\n'
 
         if (( run_namcap )); then
@@ -218,7 +223,10 @@ _chrootbuild() {
     # use "$" in arguments to commands with "sudo -i".  ${foo} or
     # ${1} is OK, but $foo or $1 isn't.
     # https://bugzilla.sudo.ws/show_bug.cgi?id=765
-    sudo --preserve-env=SOURCE_DATE_EPOCH -iu builduser bash -c 'cd /startdir; makepkg "$@"' -bash "$@"
+    sudo --preserve-env=SOURCE_DATE_EPOCH \
+        -preserve-env=BUILDTOOL \
+		--preserve-env=BUILDTOOLVER \
+        -iu builduser bash -c 'cd /startdir; makepkg "$@"' -bash "$@"
     ret=$?
     case $ret in
         0|14)
@@ -241,7 +249,7 @@ download_sources() {
     chown "$makepkg_user:" "$WORKDIR"
 
     # Ensure sources are downloaded
-    sudo -u "$makepkg_user" --preserve-env=GNUPGHOME \
+    sudo -u "$makepkg_user" --preserve-env=GNUPGHOME,SSH_AUTH_SOCK \
         env SRCDEST="$SRCDEST" BUILDDIR="$WORKDIR" \
         makepkg --config="$copydir/etc/makepkg.conf" --verifysource -o "${verifysource_args[@]}" ||
         die "Could not download sources."
@@ -305,7 +313,7 @@ done
 [[ -n $makepkg_user && -z $(id -u "$makepkg_user") ]] && die 'Invalid makepkg user.'
 makepkg_user=${makepkg_user:-${SUDO_USER:-$USER}}
 
-check_root SOURCE_DATE_EPOCH,GNUPGHOME,SRCDEST,SRCPKGDEST,PKGDEST,LOGDEST,MAKEFLAGS,PACKAGER
+check_root SOURCE_DATE_EPOCH,BUILDTOOL,BUILDTOOLVER,GNUPGHOME,SRCDEST,SRCPKGDEST,PKGDEST,LOGDEST,MAKEFLAGS,PACKAGER
 
 # Canonicalize chrootdir, getting rid of trailing /
 chrootdir=$(readlink -e "$passeddir")

bin/pkg/pkg2yaml.in

@@ -17,6 +17,24 @@ m4_include(lib/base/yaml.sh)
 
 #{{{ functions
 
+print_package_names() {
+    local version=$(get_full_version)
+    local architecture pkg
+    for pkg in ${pkgname[@]}; do
+        architecture=$(get_pkg_arch $pkg)
+        printf "%s/%s-%s-%s%s\n" "$PKGDEST" "$pkg" "$version" "$architecture" "$PKGEXT"
+    done
+}
+
+print_debug_package_names() {
+    local version=$(get_full_version)
+    local architecture
+    if check_option "debug" "y" && check_option "strip" "y"; then
+        architecture=$(get_pkg_arch)
+        printf "%s/%s-%s-%s-%s%s\n" "$PKGDEST" "$pkgbase" "debug" "$version" "$architecture" "$PKGEXT"
+    fi
+}
+
 srcyaml_write_attr(){
     local ident1="$1" ident2="$2" ident3="$3"
     local attrname=$4 attrvalues=("${@:5}")
@@ -108,13 +126,19 @@ yaml_write_fileinfo(){
     pkgbase=${pkgbase:-$pkgname}
     Yaml+=$(write_yaml_map 0 "version" "${version:-0}")
     Yaml+=$(write_empty_line)
-    local pkgfile
-    pkgfile=$(print_all_package_names)
+    local pkgfile debug_pkg
+    pkgfile=$(print_package_names)
     Yaml+=$(write_yaml_map 0 "files")
     for f in ${pkgfile}; do
         Yaml+=$(write_yaml_seq 2 "${f##*/}")
     done
     Yaml+=$(write_empty_line)
+    debug_pkg=$(print_debug_package_names)
+    Yaml+=$(write_yaml_map 0 "debug")
+    for d in ${debug_pkg}; do
+        Yaml+=$(write_yaml_seq 2 "${d##*/}")
+    done
+    Yaml+=$(write_empty_line)
 }
 
 write_srcyaml(){

data/conf/artools-iso.conf

@@ -8,8 +8,14 @@
 # the dist release; default: auto
 # ISO_VERSION=$(date +%Y%m%d)
 
-# possible values: openrc, runit, s6, suite66
+# possible values: openrc, runit, s6, suite66, dinit
 # INITSYS="openrc"
 
 # gpg key; leave empty or commented to skip img signing
 # GPG_KEY=""
+
+# possible values: zstd (default), xz
+# COMPRESSION="zstd"
+
+# zstd only: range 1..22
+# COMPRESSION_LEVEL=15

data/conf/artools-pkg.conf

@@ -10,30 +10,38 @@
 # customize buildtree; uncomment to include
 # TREE_NAMES_ARTIX=(
 #         packages-kernel
+#         packages-llvm
 #         packages-openrc
 #         packages-runit
 #         packages-s6
 #         packages-suite66
-#         python-world
+#         packages-dinit
 #         packages-perl
 #         packages-java
 #         packages-ruby
-#         packages-kf5
+#         packages-gtk
+#         packages-qt5
+#         packages-qt6
+#         packages-xorg
 #         packages-plasma
 #         packages-kde
 #         packages-gnome
 #         packages-cinnamon
 #         packages-lxqt
+#         packages-lxde
 #         packages-mate
 #         packages-xfce
 #         packages-wm
 #         packages-devel
-#         packages-lib32
 #         packages-qt6
 #         packages-office
 #         packages-misc
-#         packages-python
+#         python-world
 #         python-galaxy
+#         python-galaxy-groups
+#         python-misc
+#         packages-python
+#         packages-lib32
 # )
 
 # TREE_DIR_ARCH=${WORKSPACE_DIR}/archlinux

data/pacman/makepkg.conf

@@ -11,10 +11,10 @@
 #
 #-- The download utilities that makepkg should use to acquire sources
 #  Format: 'protocol::agent'
-DLAGENTS=('file::/usr/bin/curl -gqC - -o %o %u'
-          'ftp::/usr/bin/curl -gqfC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
-          'http::/usr/bin/curl -gqb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
-          'https::/usr/bin/curl -gqb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
+DLAGENTS=('file::/usr/bin/curl -qgC - -o %o %u'
+          'ftp::/usr/bin/curl -qgfC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
+          'http::/usr/bin/curl -qgb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
+          'https::/usr/bin/curl -qgb "" -fLC - --retry 3 --retry-delay 3 -o %o %u'
           'rsync::/usr/bin/rsync --no-motd -z %u %o'
           'scp::/usr/bin/scp -C %u %o')
 
@@ -49,8 +49,8 @@ LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now"
 #-- Make Flags: change this for DistCC/SMP systems
 #MAKEFLAGS="-j2"
 #-- Debugging flags
-DEBUG_CFLAGS="-g -fvar-tracking-assignments"
-DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
+DEBUG_CFLAGS="-g"
+DEBUG_CXXFLAGS="-g"
 #DEBUG_RUSTFLAGS="-C debuginfo=2"
 
 #########################################################################
@@ -93,7 +93,7 @@ BUILDENV=(!distcc color !ccache check !sign)
 #-- debug:      Add debugging flags as specified in DEBUG_* variables
 #-- lto:        Add compile flags for building with link time optimization
 #
-OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !debug !lto)
+OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !debug lto)
 
 #-- File integrity checks to use. Valid: md5, sha1, sha224, sha256, sha384, sha512, b2
 INTEGRITY_CHECK=(sha256)

data/proto/PKGBUILD.openrc.proto

@@ -1,38 +0,0 @@
-# Maintainer: Your Name <youremail@domain.com>
-
-pkgname=NAME-openrc
-pkgver=VERSION
-pkgrel=1
-epoch=
-pkgdesc="Openrc NAME init script"
-arch=('any')
-url="https://gitea.artixlinux.org/artixlinux/packages-openrc"
-license=('GPL2')
-groups=()
-depends=("openrc" "NAME")
-makedepends=()
-checkdepends=()
-optdepends=()
-provides=("init-NAME")
-conflicts=("init-NAME")
-replaces=()
-backup=()
-options=()
-install=
-changelog=
-source=(NAME.{confd,initd})
-sha256sums=()
-
-_inst_openrc() {
-    local sv="$1"
-    if [ -f "${srcdir}/$sv".confd ]; then
-        install -Dm644 "${srcdir}/$sv".confd "${pkgdir}"/etc/conf.d/"$sv"
-    fi
-    if [ -f "${srcdir}/$sv".initd ]; then
-        install -Dm755 "${srcdir}/$sv".initd "${pkgdir}"/etc/init.d/"$sv"
-    fi
-}
-
-package() {
-    _inst_openrc "NAME"
-}

data/proto/PKGBUILD.runit.proto

@@ -1,41 +0,0 @@
-# Maintainer: Your Name <youremail@domain.com>
-
-pkgname=NAME-runit
-pkgver=VERSION
-pkgrel=1
-epoch=
-pkgdesc="Runit NAME init script"
-arch=('any')
-url="https://gitea.artixlinux.org/artixlinux/packages-runit"
-license=('GPL2')
-groups=()
-depends=("runit" "NAME")
-makedepends=()
-checkdepends=()
-optdepends=()
-provides=("init-NAME")
-conflicts=("init-NAME")
-replaces=()
-backup=()
-options=()
-install=
-changelog=
-source=(NAME.{run,finish,check})
-sha256sums=()
-
-_inst_runit() {
-    local sv="$1"
-    if [ -f "${srcdir}/$sv".conf ]; then
-        install -Dm644 "${srcdir}/$sv".conf "${pkgdir}"/etc/runit/sv/"$sv"/conf
-    fi
-
-    for f in run finish check; do
-        if [ -f "${srcdir}/$sv.$f" ]; then
-            install -Dm755 "${srcdir}/$sv.$f" "${pkgdir}"/etc/runit/sv/"$sv/$f"
-        fi
-    done
-}
-
-package() {
-    _inst_runit "NAME"
-}

data/proto/PKGBUILD.s6.proto

@@ -1,39 +0,0 @@
-# Maintainer: Your Name <youremail@domain.com>
-
-pkgname=NAME-s6
-pkgver=VERSION
-pkgrel=1
-epoch=
-pkgdesc="S6 NAME init script"
-arch=('any')
-url="https://gitea.artixlinux.org/artixlinux/packages-s6"
-license=('GPL2')
-groups=()
-depends=("s6-base" "NAME")
-makedepends=()
-checkdepends=()
-optdepends=()
-provides=("init-NAME")
-conflicts=("init-NAME")
-replaces=()
-backup=()
-options=()
-install=
-changelog=
-source=(NAME.{dependencies,down,up,type})
-sha256sums=()
-
-
-_inst_s6(){
-    local sv="$1"
-    for f in dependencies down type up; do
-        if [ -f "${srcdir}/$sv.$f" ]; then
-            install -Dm644 "${srcdir}/$sv.$f" "${pkgdir}"/etc/s6/sv/"$sv/$f"
-        fi
-    done
-}
-
-package() {
-    _inst_s6 "NAME"
-}
-

data/proto/PKGBUILD.suite66.proto

@@ -1,34 +0,0 @@
-# Maintainer: Your Name <youremail@domain.com>
-
-pkgname=NAME-suite66
-pkgver=VERSION
-pkgrel=1
-epoch=
-pkgdesc="Suite66 NAME init script"
-arch=('any')
-url="https://gitea.artixlinux.org/artixlinux/packages-suite66"
-license=('GPL2')
-groups=()
-depends=("suite66-base" "NAME")
-makedepends=()
-checkdepends=()
-optdepends=()
-provides=("init-NAME")
-conflicts=("init-NAME")
-replaces=()
-backup=()
-options=()
-install=
-changelog=
-source=(NAME)
-sha256sums=()
-
-_inst_66() {
-    local sv="$1"
-    install -Dm644 "$sv" -t "${pkgdir}"/etc/66/service
-}
-
-package() {
-    _inst_66 "NAME"
-}
-

initcpio/Makefile

@@ -1,23 +0,0 @@
-DIRMODE = -dm0755
-MODE =  -m0755
-
-CPIOHOOKS = \
-	$(wildcard hooks/*)
-
-CPIOINST = \
-	$(wildcard install/*)
-
-SCRIPT = \
-	$(wildcard script/*)
-
-install_initcpio:
-	install $(DIRMODE) $(DESTDIR)$(CPIODIR)/hooks
-	install $(MODE) $(CPIOHOOKS) $(DESTDIR)$(CPIODIR)/hooks
-
-	install $(DIRMODE) $(DESTDIR)$(CPIODIR)/install
-	install $(MODE) $(CPIOINST) $(DESTDIR)$(CPIODIR)/install
-	install $(MODE) $(SCRIPT) $(DESTDIR)$(CPIODIR)
-
-install: install_initcpio
-
-.PHONY: install

initcpio/hooks/artix

@@ -1,275 +0,0 @@
-# args: source, newroot, mountpoint
-_mnt_dmsnapshot() {
-    local img="${1}"
-    local mnt="${2}"
-    local img_fullname="${img##*/}";
-    local img_name="${img_fullname%%.*}"
-    local dm_snap_name="${dm_snap_prefix}_${img_name}"
-    local ro_dev ro_dev_size rw_dev
-
-    ro_dev=$(losetup --find --show --read-only "${img}")
-    echo ${ro_dev} >> ${live_root}/used_block_devices
-    ro_dev_size=$(blockdev --getsz ${ro_dev})
-
-    if [[ "${cow_persistent}" == "P" ]]; then
-        if [[ -f "${cow}/${cow_directory}/${img_name}.cow" ]]; then
-            msg ":: Found '${cow}/${cow_directory}/${img_name}.cow', using as persistent."
-        else
-            msg ":: Creating '${cow}/${cow_directory}/${img_name}.cow' as persistent."
-            truncate -s "${cow_spacesize}" "${cow}/${cow_directory}/${img_name}.cow"
-        fi
-    else
-        if [[ -f "${cow}/${cow_directory}/${img_name}.cow" ]]; then
-            msg ":: Found '${cow}/${cow_directory}/${img_name}.cow' but non-persistent requested, removing."
-            rm -f "${cow}/${cow_directory}/${img_name}.cow"
-        fi
-        msg ":: Creating '${cow}/${cow_directory}/${img_name}.cow' as non-persistent."
-        truncate -s "${cow_spacesize}" "${cow}/${cow_directory}/${img_name}.cow"
-    fi
-
-    rw_dev=$(losetup --find --show "${cow}/${cow_directory}/${img_name}.cow")
-    echo ${rw_dev} >> ${live_root}/used_block_devices
-
-    dmsetup create ${dm_snap_name} --table "0 ${ro_dev_size} snapshot ${ro_dev} ${rw_dev} ${cow_persistent} ${cow_chunksize}"
-
-    if [[ "${cow_persistent}" != "P" ]]; then
-        rm -f "${cow}/${cow_directory}/${img_name}.cow"
-    fi
-
-    _mnt_dev "/dev/mapper/${dm_snap_name}" "${mnt}" "-w" "defaults"
-    echo $(readlink -f /dev/mapper/${dm_snap_name}) >> ${live_root}/used_block_devices
-}
-
-# args: source, newroot, mountpoint
-_mnt_overlayfs() {
-    local src="${1}"
-    local newroot="${2}"
-    local mnt="${3}"
-    local work_dir="${overlay_root}/work"
-    local upper_dir="${overlay_root}/upper"
-
-    mkdir -p "${upper_dir}" "${work_dir}"
-
-    mount -t overlay overlay -o lowerdir="${src}",upperdir="${upper_dir}",workdir="${work_dir}" "${newroot}${mnt}"
-}
-
-# args: /path/to/image_file, mountpoint
-_mnt_sfs() {
-    local img="${1}"
-    local mnt="${2}"
-    local img_fullname="${img##*/}"
-    local sfs_dev
-    local oper=$( [[ -n "${ip}" && -n "${miso_http_srv}" ]] && echo "mv" || echo "cp" )
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg -n ":: Copying squashfs image to RAM..."
-        if ! "${oper}" "${img}" "${cp2ram}/${img_fullname}" ; then
-            echo "ERROR: while copy '${img}' to '${cp2ram}/${img_fullname}'"
-            launch_interactive_shell
-        fi
-        img="${cp2ram}/${img_fullname}"
-        msg "done."
-    fi
-    sfs_dev=$(losetup --find --show --read-only "${img}")
-    echo ${sfs_dev} >> ${live_root}/used_block_devices
-    _mnt_dev "${sfs_dev}" "${mnt}" "-r" "defaults"
-}
-
-# args: device, mountpoint, flags, opts
-_mnt_dev() {
-    local dev="${1}"
-    local mnt="${2}"
-    local flg="${3}"
-    local opts="${4}"
-
-    mkdir -p "${mnt}"
-
-    msg ":: Mounting '${dev}' to '${mnt}'"
-
-    while ! poll_device "${dev}" 30; do
-        echo "ERROR: '${dev}' device did not show up after 30 seconds..."
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    done
-
-    if mount -o "${opts}" "${flg}" "${dev}" "${mnt}"; then
-        msg ":: Device '${dev}' mounted successfully."
-    else
-        echo "ERROR; Failed to mount '${dev}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-}
-
-_verify_checksum() {
-    local _status
-    cd "${bootmnt}/${root}"
-    sha512sum -c $1.img.sha512 > /tmp/checksum.log 2>&1
-    _status=$?
-    cd "${OLDPWD}"
-    return ${_status}
-}
-
-_verify_signature() {
-    local _status
-    cd "${bootmnt}/${root}"
-    gpg --homedir /gpg --status-fd 1 --verify $1.img.sig 2>/dev/null | grep -qE '^\[GNUPG:\] GOODSIG'
-    _status=$?
-    cd "${OLDPWD}"
-    return ${_status}
-}
-
-run_hook() {
-    [[ -z "${copytoram_size}" ]] && copytoram_size="75%"
-    [[ -z "${root}" ]] && root="LiveOS"
-
-    [[ -z "${dm_snap_prefix}" ]] && dm_snap_prefix="artix"
-    [[ -z "${artixdevice}" ]] && artixdevice="/dev/disk/by-label/${label}"
-    [[ -z "${cow_spacesize}" ]] && cow_spacesize="256M"
-    [[ -z "${overlay_root_size}" ]] && overlay_root_size="75%"
-
-    if [[ -n "${cow_label}" ]]; then
-        cow_device="/dev/disk/by-label/${cow_label}"
-        [[ -z "${cow_persistent}" ]] && cow_persistent="P"
-    elif [[ -n "${cow_device}" ]]; then
-        [[ -z "${cow_persistent}" ]] && cow_persistent="P"
-    else
-        cow_persistent="N"
-    fi
-
-    [[ -z "${cow_flags}" ]] && cow_flags="defaults"
-    [[ -z "${cow_directory}" ]] && cow_directory="persistent_${label}"
-    [[ -z "${cow_chunksize}" ]] && cow_chunksize="8"
-    [[ -z "${overlay}" ]] && overlay=""
-
-    lower_dir=''
-    live_root="/run/artix"
-    bootmnt="${live_root}/bootmnt"
-    overlay_root="${live_root}/overlay_root"
-    cow="${live_root}/cowspace"
-    cp2ram="${live_root}/copytoram"
-
-    # set mount handler for artix
-    mount_handler="artix_mount_handler"
-}
-
-_check_sum() {
-    local fs="${1}"
-    if [[ -f "${bootmnt}/${root}/${fs}.img" ]]; then
-        if [[ -f "${bootmnt}/${root}/${fs}.img.md5" ]]; then
-            msg -n ":: Self-test requested, please wait..."
-            if _verify_checksum "${fs}"; then
-                msg "done. Checksum is OK, continue booting."
-            else
-                echo "ERROR: one or more files are corrupted"
-                echo "see /tmp/checksum.log for details"
-                launch_interactive_shell
-            fi
-        else
-            echo "ERROR: checksum=y option specified but ${root}/${fs}.img.md5 not found"
-            launch_interactive_shell
-        fi
-    fi
-}
-
-_check_sig() {
-    local fs="${1}"
-    if [[ -f "${bootmnt}/${root}/${fs}.img" ]]; then
-        if [[ -f "${bootmnt}/${root}/${fs}.img.sig" ]]; then
-            msg -n ":: Signature verification requested, please wait..."
-            if _verify_signature "${fs}"; then
-                msg "done. Signature is OK, continue booting."
-            else
-                echo "ERROR: one or more files are corrupted"
-                launch_interactive_shell
-            fi
-        else
-            echo "ERROR: verify=y option specified but ${root}/${fs}.img.sig not found"
-            launch_interactive_shell
-        fi
-    fi
-}
-
-_gen_arg() {
-    local arg="${1}"
-    echo "${lower_dir:-}${lower_dir:+:}${arg}"
-}
-
-_mount_root_overlayfs() {
-    local sfs="${1}"
-    local src="${bootmnt}/${root}"
-    local dest_sfs="${live_root}/sfs"
-    local dest_img="${live_root}/img"
-
-    if [[ -f "${src}/${sfs}.img" ]]; then
-        _mnt_sfs "${src}/${sfs}.img" "${dest_sfs}/${sfs}"
-        local find_img="${dest_sfs}/${sfs}/LiveOS/${sfs}.img"
-        if [[ -f "${find_img}" ]]; then
-            mkdir -p ${dest_img}
-            lower_dir=$(_gen_arg "${dest_img}/${sfs}")
-            _mnt_dmsnapshot "${find_img}" "${dest_img}/${sfs}"
-        else
-            lower_dir=$(_gen_arg "${dest_sfs}/${sfs}")
-        fi
-    fi
-}
-
-# This function is called normally from init script, but it can be called
-# as chain from other mount handlers.
-# args: /path/to/newroot
-artix_mount_handler() {
-    local newroot="${1}"
-
-    if ! mountpoint -q "${bootmnt}"; then
-        _mnt_dev "${artixdevice}" "${bootmnt}" "-r" "defaults"
-        if [[ "${copytoram}" != "y" ]]; then
-            echo $(readlink -f ${artixdevice}) >> ${live_root}/used_block_devices
-        fi
-    fi
-
-    if [[ "${checksum}" == "y" ]]; then
-        _check_sum "rootfs"
-        [[ -n "${overlay}" ]] && _check_sum "${overlay}"
-    fi
-
-    if [[ "${verify}" == "y" ]]; then
-        _check_sig "rootfs"
-        [[ -n "${overlay}" ]] && _check_sig "${overlay}"
-    fi
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg ":: Mounting ${cp2ram} (tmpfs) filesystem, size=${copytoram_size}"
-        mkdir -p ${cp2ram}
-        mount -t tmpfs -o "size=${copytoram_size}",mode=0755 copytoram ${cp2ram}
-    fi
-
-    if [[ -n "${cow_device}" ]]; then
-        _mnt_dev "${cow_device}" "${cow}" "-r" "${cow_flags}"
-        echo $(readlink -f ${cow_device}) >> ${live_root}/used_block_devices
-        mount -o remount,rw "${cow}"
-    else
-        msg ":: Mounting ${cow} (tmpfs) filesystem, size=${cow_spacesize}..."
-        mkdir -p ${cow}
-        mount -t tmpfs -o "size=${cow_spacesize}",mode=0755 cowspace ${cow}
-    fi
-    mkdir -p -m 0700 "${cow}/${cow_directory}"
-
-    msg -n ":: Mounting overlay root (tmpfs) filesystem, size=${overlay_root_size}..."
-    mkdir -p ${overlay_root}
-    mount -t tmpfs -o "size=${overlay_root_size}",mode=0755 overlay_root ${overlay_root}
-
-    [[ -n "${overlay}" ]] && _mount_root_overlayfs "${overlay}"
-    _mount_root_overlayfs "rootfs"
-
-    _mnt_overlayfs "${lower_dir}" "${newroot}" "/"
-
-    if [[ "${copytoram}" == "y" ]]; then
-        umount -d ${bootmnt}
-        mkdir -p ${bootmnt}/${root}
-        mount -o bind ${cp2ram} ${bootmnt}/${root}
-    fi
-}
-
-# vim:ft=sh:ts=4:sw=4:et:

initcpio/hooks/artix_loop_mnt

@@ -1,35 +0,0 @@
-# vim: set ft=sh:
-
-run_hook () {
-    [[ -n "${img_label}" ]] && img_dev="/dev/disk/by-label/${img_label}"
-    [[ -z "${img_flags}" ]] && img_flags="defaults"
-    if [[ -n "${img_dev}" && -n "${img_loop}" ]]; then
-        mount_handler="artix_loop_mount_handler"
-    fi
-}
-
-artix_loop_mount_handler () {
-    newroot="${1}"
-
-    local _dev_loop
-
-    msg ":: Setup a loop device from ${img_loop} located at device ${img_dev}"
-    _mnt_dev "${img_dev}" "${live_root}/img_dev" "-r" "${img_flags}"
-    if [[ "${copytoram}" != "y" ]]; then
-        echo $(readlink -f ${img_dev}) >> ${live_root}/used_block_devices
-    fi
-
-    if _dev_loop=$(losetup --find --show --read-only "${live_root}/img_dev/${img_loop}"); then
-        artixdevice="${_dev_loop}"
-    else
-        echo "ERROR: Setting loopback device for file '${live_root}/img_dev/${img_loop}'"
-        launch_interactive_shell
-    fi
-
-    artix_mount_handler ${newroot}
-
-    if [[ "${copytoram}" == "y" ]]; then
-        losetup -d ${_dev_loop} 2>/dev/null
-        umount ${live_root}/img_dev
-    fi
-}

initcpio/hooks/artix_pxe_common

@@ -1,72 +0,0 @@
-# vim: set ft=sh:
-
-run_hook () {
-    # Do *not* declare 'bootif_dev' local! We need it in run_latehook().
-    local i net_mac bootif_mac
-    # These variables will be parsed from /tmp/net-*.conf generated by ipconfig
-    local DEVICE
-    local IPV4ADDR IPV4BROADCAST IPV4NETMASK IPV4GATEWAY IPV4DNS0 IPV4DNS1
-    local HOSTNAME DNSDOMAIN NISDOMAIN ROOTSERVER ROOTPATH
-    local filename
-    # /tmp/net-*.conf
-
-    if [[ -n "${ip}" ]]; then
-        if [[ -n "${BOOTIF}" ]]; then
-            bootif_mac=${BOOTIF#01-}
-            bootif_mac=${bootif_mac//-/:}
-            for i in /sys/class/net/*/address; do
-                read net_mac < ${i}
-                if [[ "${bootif_mac}" == "${net_mac}" ]]; then
-                    bootif_dev=${i#/sys/class/net/}
-                    bootif_dev=${bootif_dev%/address}
-                    break
-                fi
-            done
-            if [[ "${ip}" == "dhcp" ]]; then
-               ip=":::::${bootif_dev}:dhcp"
-            else
-               ip="${ip}::${bootif_dev}"
-           fi
-        fi
-
-        # setup network and save some values
-        if ! ipconfig -t 20 "ip=${ip}"; then
-                echo "ERROR; Failed to configure network"
-                echo "   Falling back to interactive prompt"
-                echo "   You can try to fix the problem manually, log out when you are finished"
-                launch_interactive_shell
-        fi
-
-        . /tmp/net-*.conf
-
-        pxeserver=${ROOTSERVER}
-
-        # setup DNS resolver
-        if [[ "${IPV4DNS0}" != "0.0.0.0" ]]; then
-            echo "# added by artix_pxe_common hook" > /etc/resolv.conf
-            echo "nameserver ${IPV4DNS0}" >> /etc/resolv.conf
-        fi
-        if [[ "${IPV4DNS1}" != "0.0.0.0" ]]; then
-            echo "nameserver ${IPV4DNS1}" >> /etc/resolv.conf
-        fi
-        if [[ -n "${DNSDOMAIN}" ]]; then
-            echo "search ${DNSDOMAIN}" >> /etc/resolv.conf
-            echo "domain ${DNSDOMAIN}" >> /etc/resolv.conf
-        fi
-    fi
-}
-
-run_latehook () {
-    if [[ -n "${ip}" ]]; then
-        [[ -z "${copy_resolvconf}" ]] && copy_resolvconf="y"
-
-        if [[ "${copytoram}" == "y" ]]; then
-            if [[ -n "${bootif_dev}" ]]; then
-                ip addr flush dev "${bootif_dev}"
-                ip link set "${bootif_dev}" down
-            fi
-        elif [[ "${copy_resolvconf}" != "n" && -f /etc/resolv.conf ]]; then
-            cp /etc/resolv.conf /new_root/etc/resolv.conf
-        fi
-    fi
-}

initcpio/hooks/artix_pxe_http

@@ -1,63 +0,0 @@
-# vim: set ft=sh:
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_http_srv}" ]]; then
-
-        # booting with http is always copy-to-ram, so set here to make sure
-        # addresses are flushed and interface is set down
-        copytoram="y"
-
-        artix_http_srv=$(eval echo ${artix_http_srv})
-        [[ -z "${artix_http_spc}" ]] && artix_http_spc="75%"
-
-        mount_handler="artix_pxe_http_mount_handler"
-    fi
-}
-
-# Fetch a file with CURL
-#
-# $1 URL
-# $2 Destination directory inside httpspace/${root}
-_curl_get() {
-    local _url="${1}"
-    local _dst="${2}"
-
-    msg ":: Downloading '${_url}'"
-    if ! curl -L -f -o "${live_root}/httpspace/${root}${_dst}/${_url##*/}" --create-dirs "${_url}"; then
-        echo "ERROR: Downloading '${_url}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-}
-
-_get_sfs() {
-    local _sfs="${2}"
-    local _src=${artix_http_srv}${root}
-    if [[ ! -z "$( curl -s --head "${_src}/${_sfs}.img" | grep "OK" )" ]]; then
-        _curl_get "${_src}/${_sfs}.img" "/"
-
-        if [[ "${checksum}" == "y" ]]; then
-            _curl_get "${_src}/${_sfs}.md5" "/"
-        fi
-        if [[ "${verify}" == "y" ]]; then
-            _curl_get "${_src}/${_sfs}.img.sig" "/"
-        fi
-    fi
-}
-
-artix_pxe_http_mount_handler () {
-    newroot="${1}"
-
-    msg ":: Mounting ${live_root}/httpspace (tmpfs) filesystem, size='${artix_http_spc}'"
-    mkdir -p "${live_root}/httpspace"
-    mount -t tmpfs -o size="${artix_http_spc}",mode=0755 httpspace "${live_root}/httpspace"
-
-    _get_sfs "rootfs"
-    [[ -n "${overlay}" ]] && _mount_root_overlayfs "${overlay}"
-
-    mkdir -p "${bootmnt}"
-    mount -o bind ${live_root}/httpspace ${bootmnt}
-
-    artix_mount_handler ${newroot}
-}

initcpio/hooks/artix_pxe_nbd

@@ -1,47 +0,0 @@
-# vim: set ft=sh:
-
-run_earlyhook() {
-    if [[ -n "${ip}" && -n "${artix_nbd_srv}" ]]; then
-        # Module autoloading like with loop devices does not work, doing manually...
-        modprobe nbd 2> /dev/null
-    fi
-}
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_nbd_srv}" ]]; then
-
-        artix_nbd_srv=$(eval echo ${artix_nbd_srv})
-        [[ -z "${artix_nbd_name}" ]] && artix_nbd_name="artix"
-
-        mount_handler="artix_pxe_nbd_mount_handler"
-    fi
-}
-
-artix_pxe_nbd_mount_handler () {
-    newroot="${1}"
-
-    msg ":: Waiting for boot device..."
-    while ! poll_device /dev/nbd0 30; do
-        echo "ERROR: boot device didn't show up after 30 seconds..."
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    done
-
-    msg ":: Setup NBD from ${artix_nbd_srv} at /dev/nbd0"
-    if [[ "${copytoram}" != "n" ]]; then
-        nbd-client ${artix_nbd_srv} -N ${artix_nbd_name} /dev/nbd0
-        copytoram="y"
-    else
-        nbd-client ${artix_nbd_srv} -N ${artix_nbd_name} -persist /dev/nbd0
-    fi
-
-    artixdevice=/dev/nbd0
-
-    artix_mount_handler ${newroot}
-
-    if [[ "${copytoram}" == "y" ]]; then
-        msg ":: Disconnect NBD from ${artix_nbd_srv} at /dev/nbd0"
-        nbd-client -d /dev/nbd0
-    fi
-}

initcpio/hooks/artix_pxe_nfs

@@ -1,30 +0,0 @@
-# vim: set ft=sh:
-
-run_hook() {
-    if [[ -n "${ip}" && -n "${artix_nfs_srv}" ]]; then
-
-        artix_nfs_srv=$(eval echo ${artix_nfs_srv})
-        [[ -n "${artix_nfs_opt}" ]] && artix_nfs_opt="-o ${artix_nfs_opt}"
-
-        mount_handler="artix_nfs_mount_handler"
-    fi
-}
-
-artix_nfs_mount_handler() {
-    newroot="${1}"
-    mkdir -p "${bootmnt}"
-    msg ":: Mounting '${artix_nfs_srv}'"
-    # Do not put "${artix_nfs_opt}" nfsmount fails!
-    if ! nfsmount ${artix_nfs_opt} "${artix_nfs_srv}" "${bootmnt}"; then
-        echo "ERROR: Mounting '${artix_nfs_srv}'"
-        echo "   Falling back to interactive prompt"
-        echo "   You can try to fix the problem manually, log out when you are finished"
-        launch_interactive_shell
-    fi
-
-    if [[ "${copytoram}" != "n" ]]; then
-        copytoram="y"
-    fi
-
-    artix_mount_handler ${newroot}
-}

initcpio/hooks/artix_shutdown

@@ -1,6 +0,0 @@
-run_cleanuphook() {
-    rm -rf /usr/lib/modules
-    cp -ax / /run/initramfs
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix

@@ -1,30 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "cdrom"
-    add_module "loop"
-    add_module "dm-snapshot"
-    add_module "overlay"
-
-    add_runscript
-
-    add_binary /usr/lib/udev/cdrom_id
-    add_binary blockdev
-    add_binary dmsetup
-    add_binary losetup
-    add_binary mountpoint
-    add_binary truncate
-    add_binary gpg
-    add_binary grep
-
-    add_file /usr/lib/udev/rules.d/60-cdrom_id.rules
-    add_file /usr/lib/udev/rules.d/10-dm.rules
-    add_file /usr/lib/udev/rules.d/95-dm-notify.rules
-    add_file /usr/lib/initcpio/udev/11-dm-initramfs.rules /usr/lib/udev/rules.d/11-dm-initramfs.rules
-    if [[ $ARTIX_GNUPG_FD ]]; then
-        mkdir -p "$BUILDROOT$dest"/gpg
-        gpg --homedir "$BUILDROOT$dest"/gpg --import <&$ARTIX_GNUPG_FD
-    fi
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_kms

@@ -1,16 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "radeon"
-    add_module "nouveau"
-    add_module "i915"
-    add_module "via-agp"
-    add_module "sis-agp"
-    add_module "intel-agp"
-}
-
-help() {
-    cat << HELPEOF
-Adds all common KMS drivers to the initramfs image.
-HELPEOF
-}

initcpio/install/artix_loop_mnt

@@ -1,13 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_runscript
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via loop device.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_common

@@ -1,26 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_checked_modules -f "(irda|phy|wimax|wireless|ppp_|plip|pppoe)" "/drivers/net/"
-
-    add_runscript
-
-    add_binary /usr/lib/initcpio/ipconfig /bin/ipconfig
-
-    # Add hosts support files+dns
-    add_symlink /usr/lib/libnss_files.so.2 $(readlink /usr/lib/libnss_files.so.2)
-    add_binary $(readlink -f /usr/lib/libnss_files.so.2)
-    add_symlink /usr/lib/libnss_dns.so.2 $(readlink /usr/lib/libnss_dns.so.2)
-    add_binary $(readlink -f /usr/lib/libnss_dns.so.2)
-
-    add_dir /etc
-    echo "hosts: files dns" > $BUILDROOT/etc/nsswitch.conf
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_http

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_runscript
-
-    add_binary curl
-
-    add_file $(readlink -f /etc/ssl/certs/ca-certificates.crt) /etc/ssl/certs/ca-certificates.crt
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE and HTTP.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_nbd

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "nbd"
-
-    add_runscript
-
-    add_binary nbd-client
-}
-
-help() {
-cat<<HELPEOF
-  This hook loads the necessary modules for boot via PXE and NBD.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_pxe_nfs

@@ -1,17 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_module "nfs"
-
-    add_runscript
-
-    add_binary /usr/lib/initcpio/nfsmount /bin/nfsmount
-}
-
-help() {
-    cat <<HELPEOF
-  This hook loads the necessary modules for boot via PXE and NFS.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/install/artix_shutdown

@@ -1,20 +0,0 @@
-#!/bin/bash
-
-build() {
-    add_binary cp
-
-    add_runscript
-
-    add_file /etc/initcpio/artix_shutdown /shutdown
-}
-
-help() {
-    cat <<HELPEOF
-This hook will create a shutdown initramfs in /run/initramfs
-that we can pivot to on shutdown in order to unmount / and
-and others mount points, dm-snapshot devices and loopback devices.
-Mostly usefull for dm-snapshot persistent.
-HELPEOF
-}
-
-# vim: set ft=sh ts=4 sw=4 et:

initcpio/script/artix_shutdown

@@ -1,37 +0,0 @@
-#!/bin/ash
-
-# /oldroot depends on things inside /oldroot/run/artix...
-mkdir /oldrun
-mount -n --move /oldroot/run /oldrun
-
-# Unmount all mounts now.
-umount $(mount | awk '$3 ~/^\/oldroot/ {print $3}' | sort -r)
-
-# Remove all dm-snapshot devices.
-dmsetup remove_all
-
-# Remove all loopback devices.
-for _lup in $(grep ^/dev/loop /oldrun/artix/used_block_devices | tac); do
-    if ! losetup -d ${_lup} 2> /dev/null; then
-        umount -d ${_lup}
-    fi
-done
-
-# Unmount the space used to store *.cow.
-umount /oldrun/artix/cowspace
-
-# Unmount boot device if needed (no copytoram=y used)
-if [[ ! -d /oldrun/artix/copytoram ]]; then
-    if [[ -d /oldrun/artix/img_dev ]]; then
-        umount /oldrun/artix/img_dev
-    else
-        umount /oldrun/bootmnt
-    fi
-fi
-
-# reboot / poweroff / halt, depending on the argument passed by init
-# if something invalid is passed, we halt
-case "$1" in
-  reboot|poweroff|halt) "$1" -f ;;
-  *) halt -f;;
-esac

lib/iso/calamares.sh

@@ -29,13 +29,20 @@ write_services_runit_conf(){
 write_services_s6_conf(){
     local conf="$1"/services-s6.conf
     write_services_conf 'svDir' '/etc/s6/sv' 'dbDir' '/etc/s6/rc/compiled' > "$conf"
+    printf '%s\n' "" >> "$conf"
+    printf '%s\n' "defaultBundle: default" >> "$conf"
 }
 
-write_services_66_conf(){
-    local conf="$1"/services-66.conf
+write_services_suite66_conf(){
+    local conf="$1"/services-suite66.conf
     write_services_conf 'svDir' '/etc/66/service' 'runsvDir' '/var/lib/66/system' > "$conf"
 }
 
+write_services_dinit_conf(){
+    local conf="$1"/services-dinit.conf
+    write_services_conf 'initdDir' '/etc/dinit.d' 'runsvDir' '/etc/dinit.d/boot.d' > "$conf"
+}
+
 configure_calamares(){
     local mods="$1/etc/calamares/modules"
     if [[ -d "$mods" ]];then

lib/iso/dracut.sh

@@ -10,7 +10,7 @@ prepare_initramfs_dracut(){
     printf "%s\n" 'add_dracutmodules+=" dmsquash-live"' > "$mnt"/etc/dracut.conf.d/50-live.conf
 
     msg "Starting build: %s" "${kver}"
-    artools-chroot "$mnt" dracut -fqM /boot/initramfs.img "$kver"
+    artix-chroot "$mnt" dracut -fqM /boot/initramfs.img "$kver"
     msg "Image generation successful"
 
     cp "$mnt"/boot/initramfs.img "${iso_root}"/boot/initramfs-"${arch}".img

lib/iso/grub.sh

@@ -2,20 +2,6 @@
 
 #{{{ grub
 
-configure_grub(){
-    msg "Configuring grub kernel options ..."
-    local ro_opts=()
-    local rw_opts=()
-    local kopts=("label=${iso_label}")
-
-    [[ "${profile}" != 'base' ]] && kopts+=('overlay=livefs')
-
-    sed -e "s|@kopts@|${kopts[*]}|" \
-        -e "s|@ro_opts@|${ro_opts[*]}|" \
-        -e "s|@rw_opts@|${rw_opts[*]}|" \
-        -i "${iso_root}"/boot/grub/kernels.cfg
-}
-
 prepare_grub(){
     local platform=i386-pc img='core.img' prefix=/boot/grub
     local lib="$1"/usr/lib/grub
@@ -23,7 +9,6 @@ prepare_grub(){
     local livecfg="$2"/usr/share/grub
     local grub=${iso_root}/boot/grub efi=${iso_root}/efi/boot
 
-
     prepare_dir "${grub}/${platform}"
 
     cp "${livecfg}"/cfg/*.cfg "${grub}"

lib/iso/initcpio.sh

@@ -2,56 +2,71 @@
 
 #{{{ initcpio
 
-write_mkinitcpio_conf() {
-    msg2 "Writing mkinitcpio.conf ..."
-    local conf="$1/etc/mkinitcpio-artix.conf"
-    printf "%s\n" 'MODULES=(loop dm-snapshot)' > "$conf"
-    printf "%s\n" 'COMPRESSION="xz"' >> "$conf"
-    if [[ "${profile}" == 'base' ]];then
-        printf "%s\n" 'HOOKS=(base udev artix_shutdown artix artix_loop_mnt
-                            artix_pxe_common artix_pxe_http artix_pxe_nbd artix_pxe_nfs
-                            artix_kms modconf block filesystems keyboard keymap)' >> "$conf"
-    else
-        printf "%s\n" 'HOOKS=(base udev artix_shutdown artix artix_loop_mnt
-                            artix_kms modconf block filesystems keyboard keymap)' >> "$conf"
+make_checksum(){
+    local file="$1"
+    msg2 "Creating md5sum ..."
+    cd "${iso_root}${live_dir}"
+    md5sum "$file" > "$file".md5
+    cd "${OLDPWD}"
+}
+
+make_sig () {
+    local file="$1"
+    msg2 "Creating signature file..."
+    chown "${owner}:$(id --group "${owner}")" "${iso_root}${live_dir}"
+    su "${owner}" -c "gpg --detach-sign --output $file.sig --default-key ${GPG_KEY} $file"
+    chown "root:root" "${iso_root}${live_dir}"
+}
+
+export_gpg_publickey() {
+    key_export=${WORKSPACE_DIR}/pubkey.gpg
+    if [[ ! -e "${key_export}" ]]; then
+        gpg --batch --output "${key_export}" --export "${GPG_KEY}"
     fi
 }
 
-prepare_initcpio(){
-    msg2 "Copying initcpio ..."
-    local dest="$1"
-    cp /etc/initcpio/hooks/artix* "$dest"/etc/initcpio/hooks
-    cp /etc/initcpio/install/artix* "$dest"/etc/initcpio/install
-    cp /etc/initcpio/artix_shutdown "$dest"/etc/initcpio
-}
+prepare_initramfs_mkinitcpio() {
+    local mnt="$1" packages=() mkinitcpio_conf k
 
-prepare_initramfs(){
-    local mnt="$1"
+    mkinitcpio_conf=mkinitcpio-default.conf
+    [[ "${profile}" == 'base' ]] && mkinitcpio_conf=mkinitcpio-pxe.conf
+    k=$(<"$mnt"/usr/src/linux/version)
 
-    prepare_initcpio "$mnt"
+    read_from_list "${common_dir}/Packages-boot"
+    basestrap "${basestrap_args[@]}" "$mnt" "${packages[@]}"
 
-    write_mkinitcpio_conf "$mnt"
-
-    if [[ -n ${GPG_KEY} ]]; then
-        su "${owner}" -c "gpg --export ${GPG_KEY} >/tmp/GPG_KEY"
-        exec 17<>/tmp/GPG_KEY
+    if [[ -n "${GPG_KEY}" ]]; then
+        exec {ARTIX_GNUPG_FD}<>"${key_export}"
+        export ARTIX_GNUPG_FD
     fi
-    local _kernel
-     _kernel=$(<"$mnt"/usr/src/linux/version)
-    ARTIX_GNUPG_FD=${GPG_KEY:+17} artools-chroot "$mnt" \
-        /usr/bin/mkinitcpio -k "${_kernel}" \
-        -c /etc/mkinitcpio-artix.conf \
+
+    artix-chroot "$mnt" mkinitcpio -k "$k" \
+        -c /etc/"$mkinitcpio_conf" \
         -g /boot/initramfs.img
 
     if [[ -n "${GPG_KEY}" ]]; then
-        exec 17<&-
+        exec {ARTIX_GNUPG_FD}<&-
+        unset ARTIX_GNUPG_FD
     fi
-    if [[ -f /tmp/GPG_KEY ]]; then
-        rm /tmp/GPG_KEY
+    if [[ -f "${key_export}" ]]; then
+        rm "${key_export}"
     fi
-
     cp "$mnt"/boot/initramfs.img "${iso_root}"/boot/initramfs-"${arch}".img
     prepare_boot_extras "$mnt"
 }
 
+configure_grub_mkinitcpio() {
+    msg "Configuring grub kernel options ..."
+    local ro_opts=()
+    local rw_opts=()
+    local kopts=("label=${iso_label}")
+
+    [[ "${profile}" != 'base' ]] && kopts+=('overlay=livefs')
+
+    sed -e "s|@kopts@|${kopts[*]}|" \
+        -e "s|@ro_opts@|${ro_opts[*]}|" \
+        -e "s|@rw_opts@|${rw_opts[*]}|" \
+        -i "${iso_root}"/boot/grub/kernels.cfg
+}
+
 #}}}

lib/iso/profile.sh

@@ -56,7 +56,8 @@ read_from_list() {
 read_from_services() {
     for svc in "${SERVICES[@]}"; do
         case "$svc" in
-            sddm|gdm|lightdm|mdm|greetd|lxdm|xdm) packages+=("$svc-${INITSYS}") ;;
+            sddm|gdm|lightdm|mdm|greetd|lxdm|xdm)
+                packages+=("$svc-${INITSYS}"); display_manager="$svc" ;;
             NetworkManager) packages+=("networkmanager-${INITSYS}") ;;
             connmand) packages+=("connman-${INITSYS}") ;;
             cupsd) packages+=("cups-${INITSYS}") ;;

lib/iso/services.sh

@@ -23,27 +23,29 @@ add_svc_runit(){
 }
 
 add_svc_s6(){
-    local mnt="$1" names="$2" rlvl="${3:-default}" error ret
-    local db=/etc/s6/rc/compiled
+    local mnt="$1" names="$2" rlvl="${3:-default}" dep
+    dep="$mnt"/etc/s6/sv/"$display_manager"-srv/dependencies.d
     for svc in $names; do
-        error=false
-        chroot "$mnt" s6-rc-db -c "$db" type "$svc" &> /dev/null || error=true
-        ret="$?"
-        if [ $ret -eq 0 ] && [[ "$error" == false ]]; then
-            msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
-            chroot "$mnt" s6-rc-bundle-update -c "$db" add "$rlvl" "$svc"
+        msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
+        chroot "$mnt" s6-service add "$rlvl" "$svc"
+        if [[ "$svc" == "$display_manager" ]]; then
+            if [[ -d "$dep" ]]; then
+                touch "$dep"/artix-live
+            fi
         fi
     done
 
-    local rlvl=/etc/s6/current
+    chroot "$mnt" s6-db-reload -r
+
+    local src=/etc/s6/current skel=/etc/s6/skel getty='/usr/bin/agetty -L -8 tty7 115200'
     # rebuild s6-linux-init binaries
-    chroot "$mnt" rm -r "$rlvl"
-    chroot "$mnt" s6-linux-init-maker -1 -N -f /etc/s6/skel -G "/usr/bin/agetty -L -8 tty7 115200" -c "$rlvl" "$rlvl"
-    chroot "$mnt" mv "$rlvl"/bin/init "$rlvl"/bin/s6-init
-    chroot "$mnt" cp -a "$rlvl"/bin /usr
+    chroot "$mnt" rm -r "$src"
+    chroot "$mnt" s6-linux-init-maker -1 -N -f "$skel" -G "$getty" -c "$src" "$src"
+    chroot "$mnt" mv "$src"/bin/init "$src"/bin/s6-init
+    chroot "$mnt" cp -a "$src"/bin /usr
 }
 
-add_svc_66(){
+add_svc_suite66(){
     local mnt="$1" names="$2"
     for svc in $names; do
         if [[ -f "$mnt"/etc/66/service/"$svc" ]]; then
@@ -53,4 +55,14 @@ add_svc_66(){
     done
 }
 
+add_svc_dinit(){
+    local mnt="$1" names="$2"
+    for svc in $names; do
+        if [[ -d $mnt/etc/dinit.d/boot.d ]]; then
+            msg2 "Setting %s: [%s]" "${INITSYS}" "$svc"
+            chroot "$mnt" ln -s ../"$svc" /etc/dinit.d/boot.d/"$svc" &>/dev/null
+        fi
+    done
+}
+
 #}}}

lib/iso/squash.sh

@@ -2,24 +2,6 @@
 
 #{{{ squash
 
-make_sig () {
-    local file="$1"
-    msg2 "Creating signature file..."
-    cd "${iso_root}${live_dir}"
-    chown "${owner}:$(id --group "${owner}")" "${iso_root}${live_dir}"
-    su "${owner}" -c "gpg --detach-sign --default-key ${GPG_KEY} $file"
-    chown -R root "${iso_root}${live_dir}"
-    cd "${OLDPWD}"
-}
-
-make_checksum(){
-    local file="$1"
-    msg2 "Creating md5sum ..."
-    cd "${iso_root}${live_dir}"
-    md5sum "$file" > "$file".md5
-    cd "${OLDPWD}"
-}
-
 make_ext_img(){
     local src="$1"
     local size=32G
@@ -85,14 +67,14 @@ make_sfs() {
 
         mksfs_args+=("${sfs_out}")
 
-        mksfs_args+=(-comp xz -b 256K -Xbcj x86 -noappend)
+        mksfs_args+=(-comp "${COMPRESSION}" "${COMPRESSION_ARGS[@]}" -noappend)
 
         mksquashfs "${mksfs_args[@]}"
 
         if ! ${use_dracut}; then
             make_checksum "${img_name}"
             if [[ -n ${GPG_KEY} ]];then
-                make_sig "${img_name}"
+                make_sig "${iso_root}${live_dir}/${img_name}"
             fi
         fi
         if ${persist}; then

lib/pkg/repo.sh

@@ -41,7 +41,7 @@ find_pkg(){
 tree_loop(){
     local func="$1" pkgs
     for tree in "${ARTIX_TREE[@]}"; do
-        pkgs=$(find "${TREE_DIR_ARTIX}/$tree" -name repos -o -name "$CARCH" | sort)
+        pkgs=$(find "${TREE_DIR_ARTIX}/$tree" -name "$CARCH" | sort)
         for _package in ${pkgs}; do
             "$func" "$_package"
         done

lib/pkg/table.sh

@@ -5,32 +5,31 @@
 msg_table_header(){
     local mesg=$1; shift
     # shellcheck disable=2059
-    printf "${BLUE} ${mesg} ${ALL_OFF}\n" "$@" >&2
+    printf "${BLUE} ${mesg} ${ALL_OFF}\n" "$@"
 }
 
 msg_row_yellow(){
     local mesg=$1; shift
     # shellcheck disable=2059
-    printf "${YELLOW} ${mesg}${ALL_OFF}\n" "$@" >&2
+    printf "${YELLOW} ${mesg}${ALL_OFF}\n" "$@"
 }
 
 msg_row_green(){
     local mesg=$1; shift
     # shellcheck disable=2059
-    printf "${GREEN} ${mesg}${ALL_OFF}\n" "$@" >&2
+    printf "${GREEN} ${mesg}${ALL_OFF}\n" "$@"
 }
 
 msg_row(){
     local mesg=$1; shift
-#     printf "${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
     # shellcheck disable=2059
-    printf "${WHITE} ${mesg}${ALL_OFF}\n" "$@" >&2
+    printf "${WHITE} ${mesg}${ALL_OFF}\n" "$@"
 }
 
 msg_row_red(){
     local mesg=$1; shift
     # shellcheck disable=2059
-    printf "${RED} ${mesg} ${ALL_OFF}\n" "$@" >&2
+    printf "${RED} ${mesg} ${ALL_OFF}\n" "$@"
 }
 
 #}}}

lib/util-iso.sh

@@ -19,6 +19,18 @@ load_iso_config(){
 
     GPG_KEY=${GPG_KEY:-''}
 
+    COMPRESSION="${COMPRESSION:-zstd}"
+
+    COMPRESSION_LEVEL="${COMPRESSION_LEVEL:-15}"
+
+    if [[ -z "${COMPRESSION_ARGS[*]}" ]]; then
+        COMPRESSION_ARGS=(-Xcompression-level "${COMPRESSION_LEVEL}")
+    fi
+
+    if [[ "${COMPRESSION}" == 'xz' ]]; then
+        COMPRESSION_ARGS=(-Xbcj x86)
+    fi
+
     return 0
 }
 

lib/util-pkg.sh

@@ -23,19 +23,19 @@ load_pkg_config(){
 
     ARTIX_TREE=(
         packages community
-        packages-{gfx,gtk,media,net,qt5,xorg}
+        packages-{gfx,media,net}
     )
 
     local dev_tree=(
-        packages-{python,perl,java,ruby}
-        python-{world,galaxy}
+        packages-{llvm,python,perl,java,ruby,misc}
+        python-{world,galaxy,galaxy-groups,misc}
     )
 
-    local init_tree=(packages-{openrc,runit,s6,suite66})
+    local init_tree=(packages-{openrc,runit,s6,suite66,dinit})
 
     local desktop_tree=(
-        packages-{kf5,plasma,kde,qt6}
-        packages-{lxqt,gnome,cinnamon,mate,xfce,wm}
+        packages-{kf5,plasma,kde,qt5,qt6,xorg,gtk}
+        packages-{lxqt,gnome,cinnamon,mate,xfce,wm,lxde}
     )
 
     [[ -z ${TREE_NAMES_ARTIX[*]} ]] && \