Version 20170911

systemd-nspawn use a default environ PATH value of:
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin

Since filesystem 2017.08, this is no more overrided by /etc/profile
to the Arch default:
PATH=/usr/local/sbin:/usr/local/bin:/usr/bin

.gitignore

@@ -0,0 +1,18 @@
+*~
+devtools-*.tar.gz*
+archbuild
+archco
+archrelease
+archrm
+bash_completion
+checkpkg
+commitpkg
+finddeps
+lddd
+makechrootpkg
+mkarchroot
+rebuildpkgs
+zsh_completion
+find-libdeps
+crossrepomove
+arch-nspawn

Makefile

@@ -1,29 +1,121 @@
-all:
+V=20170911
+
+PREFIX = /usr/local
+
+BINPROGS = \
+	checkpkg \
+	commitpkg \
+	archco \
+	archrelease \
+	archrm \
+	archbuild \
+	lddd \
+	finddeps \
+	rebuildpkgs \
+	find-libdeps \
+	crossrepomove\
+	arch-nspawn \
+	mkarchroot \
+	makechrootpkg
+
+CONFIGFILES = \
+	makepkg-i686.conf \
+	makepkg-x86_64.conf \
+	pacman-extra.conf \
+	pacman-testing.conf \
+	pacman-staging.conf \
+	pacman-multilib.conf \
+	pacman-multilib-testing.conf \
+	pacman-multilib-staging.conf \
+	pacman-kde-unstable.conf \
+	pacman-gnome-unstable.conf
+
+COMMITPKG_LINKS = \
+	extrapkg \
+	corepkg \
+	testingpkg \
+	stagingpkg \
+	communitypkg \
+	community-testingpkg \
+	community-stagingpkg \
+	multilibpkg \
+	multilib-testingpkg \
+	multilib-stagingpkg \
+	kde-unstablepkg \
+	gnome-unstablepkg
+
+ARCHBUILD_LINKS = \
+	extra-i686-build \
+	extra-x86_64-build \
+	testing-i686-build \
+	testing-x86_64-build \
+	staging-i686-build \
+	staging-x86_64-build \
+	multilib-build \
+	multilib-testing-build \
+	multilib-staging-build \
+	kde-unstable-i686-build \
+	kde-unstable-x86_64-build \
+	gnome-unstable-i686-build \
+	gnome-unstable-x86_64-build
+
+CROSSREPOMOVE_LINKS = \
+	extra2community \
+	community2extra
+
+BASHCOMPLETION_LINKS = \
+	archco \
+	communityco
+
+all: $(BINPROGS) bash_completion zsh_completion
+
+edit = sed -e "s|@pkgdatadir[@]|$(DESTDIR)$(PREFIX)/share/devtools|g"
+
+%: %.in Makefile lib/common.sh
+	@echo "GEN $@"
+	@$(RM) "$@"
+	@{ echo -n 'm4_changequote([[[,]]])'; cat $@.in; } | m4 -P | $(edit) >$@
+	@chmod a-w "$@"
+	@chmod +x "$@"
+	@bash -O extglob -n "$@"
+
+clean:
+	rm -f $(BINPROGS) bash_completion zsh_completion
 
 install:
-	# extrapkg/checkpkg and friends
-	mkdir -p $(DESTDIR)/usr/bin
-	install -m 755 checkpkg $(DESTDIR)/usr/bin
-	install -m 755 extrapkg $(DESTDIR)/usr/bin
-	ln -sf extrapkg $(DESTDIR)/usr/bin/corepkg
-	ln -sf extrapkg $(DESTDIR)/usr/bin/testingpkg
-	ln -sf extrapkg $(DESTDIR)/usr/bin/unstablepkg
-	# new chroot tools, only usable by root
-	mkdir -p $(DESTDIR)/usr/sbin
-	install -m 755 mkarchroot $(DESTDIR)/usr/sbin
-	install -m 755 makechrootpkg $(DESTDIR)/usr/sbin
-	#Additional packaging helper scripts
-	install -m 755 lddd $(DESTDIR)/usr/bin
-	install -m 755 finddeps $(DESTDIR)/usr/bin
+	install -dm0755 $(DESTDIR)$(PREFIX)/bin
+	install -dm0755 $(DESTDIR)$(PREFIX)/share/devtools
+	install -m0755 ${BINPROGS} $(DESTDIR)$(PREFIX)/bin
+	install -m0644 ${CONFIGFILES} $(DESTDIR)$(PREFIX)/share/devtools
+	for l in ${COMMITPKG_LINKS}; do ln -sf commitpkg $(DESTDIR)$(PREFIX)/bin/$$l; done
+	for l in ${ARCHBUILD_LINKS}; do ln -sf archbuild $(DESTDIR)$(PREFIX)/bin/$$l; done
+	for l in ${CROSSREPOMOVE_LINKS}; do ln -sf crossrepomove $(DESTDIR)$(PREFIX)/bin/$$l; done
+	ln -sf find-libdeps $(DESTDIR)$(PREFIX)/bin/find-libprovides
+	install -Dm0644 bash_completion $(DESTDIR)/usr/share/bash-completion/completions/devtools
+	for l in ${BASHCOMPLETION_LINKS}; do ln -sf devtools $(DESTDIR)/usr/share/bash-completion/completions/$$l; done
+	install -Dm0644 zsh_completion $(DESTDIR)$(PREFIX)/share/zsh/site-functions/_devtools
+	ln -sf archco $(DESTDIR)$(PREFIX)/bin/communityco
 
 uninstall:
-	# remove all files we installed
-	rm $(DESTDIR)/usr/bin/checkpkg
-	rm $(DESTDIR)/usr/bin/extrapkg
-	rm $(DESTDIR)/usr/bin/corepkg
-	rm $(DESTDIR)/usr/bin/testingpkg
-	rm $(DESTDIR)/usr/bin/unstablepkg
-	rm $(DESTDIR)/usr/sbin/mkarchroot
-	rm $(DESTDIR)/usr/sbin/makechrootpkg
-	rm $(DESTDIR)/usr/bin/lddd
-	rm $(DESTDIR)/usr/bin/finddeps
+	for f in ${BINPROGS}; do rm -f $(DESTDIR)$(PREFIX)/bin/$$f; done
+	for f in ${CONFIGFILES}; do rm -f $(DESTDIR)$(PREFIX)/share/devtools/$$f; done
+	for l in ${COMMITPKG_LINKS}; do rm -f $(DESTDIR)$(PREFIX)/bin/$$l; done
+	for l in ${ARCHBUILD_LINKS}; do rm -f $(DESTDIR)$(PREFIX)/bin/$$l; done
+	for l in ${CROSSREPOMOVE_LINKS}; do rm -f $(DESTDIR)$(PREFIX)/bin/$$l; done
+	rm $(DESTDIR)/usr/share/bash-completion/completions/devtools
+	rm $(DESTDIR)$(PREFIX)/share/zsh/site-functions/_devtools
+	rm -f $(DESTDIR)$(PREFIX)/bin/communityco
+	rm -f $(DESTDIR)$(PREFIX)/bin/find-libprovides
+
+dist:
+	git archive --format=tar --prefix=devtools-$(V)/ $(V) | gzip -9 > devtools-$(V).tar.gz
+	gpg --detach-sign --use-agent devtools-$(V).tar.gz
+
+upload:
+	scp devtools-$(V).tar.gz devtools-$(V).tar.gz.sig repos.archlinux.org:/srv/ftp/other/devtools/
+
+check: $(BINPROGS) bash_completion makepkg-x86_64.conf PKGBUILD.proto
+	shellcheck $^
+
+.PHONY: all clean install uninstall dist upload check
+.DELETE_ON_ERROR:

PKGBUILD.proto

@@ -0,0 +1,48 @@
+#!/hint/bash
+# shellcheck disable=2034
+
+# This is an example PKGBUILD file, so that shellcheck can know what
+# variables to expect be set after including a PKGBUILD.
+
+# Maintainer: Your Name <youremail@domain.com>
+pkgname=NAME
+pkgver=VERSION
+pkgrel=1
+epoch=
+pkgdesc=""
+arch=()
+url=""
+license=('GPL')
+groups=()
+depends=()
+makedepends=()
+checkdepends=()
+optdepends=()
+provides=()
+conflicts=()
+replaces=()
+backup=()
+options=()
+install=
+changelog=
+source=("$pkgname-$pkgver.tar.gz"
+        "$pkgname-$pkgver.patch")
+noextract=()
+md5sums=()
+validpgpkeys=()
+
+prepare() {
+	:
+}
+
+build() {
+	:
+}
+
+check() {
+	:
+}
+
+package() {
+	:
+}

arch-nspawn.in

@@ -0,0 +1,119 @@
+#!/bin/bash
+# License: GNU GPLv2
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+m4_include(lib/common.sh)
+m4_include(lib/archroot.sh)
+
+working_dir=''
+
+files=()
+
+usage() {
+	echo "Usage: ${0##*/} [options] working-dir [systemd-nspawn arguments]"
+	echo "A wrapper around systemd-nspawn. Provides support for pacman."
+	echo
+	echo ' options:'
+	echo '    -C <file>     Location of a pacman config file'
+	echo '    -M <file>     Location of a makepkg config file'
+	echo '    -c <dir>      Set pacman cache'
+	echo '    -f <file>     Copy file from the host to the chroot'
+	echo '    -s            Do not run setarch'
+	echo '    -h            This message'
+	exit 1
+}
+
+while getopts 'hC:M:c:f:s' arg; do
+	case "$arg" in
+		C) pac_conf="$OPTARG" ;;
+		M) makepkg_conf="$OPTARG" ;;
+		c) cache_dir="$OPTARG" ;;
+		f) files+=("$OPTARG") ;;
+		s) nosetarch=1 ;;
+		h|?) usage ;;
+		*) error "invalid argument '%s'" "$arg"; usage ;;
+	esac
+done
+shift $((OPTIND - 1))
+
+(( $# < 1 )) && die 'You must specify a directory.'
+check_root
+
+working_dir=$(readlink -f "$1")
+shift 1
+
+[[ -z $working_dir ]] && die 'Please specify a working directory.'
+
+if [[ -z $cache_dir ]]; then
+	cache_dirs=($(pacman -v 2>&1 | grep '^Cache Dirs:' | sed 's/Cache Dirs:\s*//g'))
+else
+	cache_dirs=("$cache_dir")
+fi
+
+# shellcheck disable=2016
+host_mirror=$(pacman --cachedir /doesnt/exist -Sddp extra/devtools 2>/dev/null | sed -r 's#(.*/)extra/os/.*#\1$repo/os/$arch#')
+# shellcheck disable=2016
+[[ $host_mirror == *file://* ]] && host_mirror_path=$(echo "$host_mirror" | sed -r 's#file://(/.*)/\$repo/os/\$arch#\1#g')
+
+# {{{ functions
+build_mount_args() {
+	declare -g mount_args=()
+
+	if [[ -n $host_mirror_path ]]; then
+		mount_args+=("--bind-ro=$host_mirror_path")
+	fi
+
+	mount_args+=("--bind=${cache_dirs[0]}")
+
+	for cache_dir in "${cache_dirs[@]:1}"; do
+		mount_args+=("--bind-ro=$cache_dir")
+	done
+}
+
+copy_hostconf () {
+	cp -a /etc/pacman.d/gnupg "$working_dir/etc/pacman.d"
+	echo "Server = $host_mirror" >"$working_dir/etc/pacman.d/mirrorlist"
+
+	[[ -n $pac_conf ]] && cp "$pac_conf" "$working_dir/etc/pacman.conf"
+	[[ -n $makepkg_conf ]] && cp "$makepkg_conf" "$working_dir/etc/makepkg.conf"
+
+	local file
+	for file in "${files[@]}"; do
+		mkdir -p "$(dirname "$working_dir$file")"
+		cp -T "$file" "$working_dir$file"
+	done
+
+	sed -r "s|^#?\\s*CacheDir.+|CacheDir = $(echo -n "${cache_dirs[@]}")|g" -i "$working_dir/etc/pacman.conf"
+}
+# }}}
+
+umask 0022
+
+# Sanity check
+if [[ ! -f "$working_dir/.arch-chroot" ]]; then
+	die "'%s' does not appear to be an Arch chroot." "$working_dir"
+elif [[ $(cat "$working_dir/.arch-chroot") != "$CHROOT_VERSION" ]]; then
+	die "chroot '%s' is not at version %s. Please rebuild." "$working_dir" "$CHROOT_VERSION"
+fi
+
+build_mount_args
+copy_hostconf
+
+eval "$(grep '^CARCH=' "$working_dir/etc/makepkg.conf")"
+
+[[ -z $nosetarch ]] || unset CARCH
+
+exec ${CARCH:+setarch "$CARCH"} systemd-nspawn -q \
+	-D "$working_dir" \
+	-E "PATH=/usr/local/sbin:/usr/local/bin:/usr/bin" \
+	--register=no --keep-unit \
+	"${mount_args[@]}" \
+	"$@"

archbuild.in

@@ -0,0 +1,78 @@
+#!/bin/bash
+# License: Unspecified
+
+m4_include(lib/common.sh)
+m4_include(lib/archroot.sh)
+
+base_packages=(base-devel)
+makechrootpkg_args=(-c -n)
+
+cmd="${0##*/}"
+if [[ "${cmd%%-*}" == 'multilib' ]]; then
+	repo="${cmd%-build}"
+	arch='x86_64'
+	base_packages+=(multilib-devel)
+else
+	tag="${cmd%-build}"
+	repo=${tag%-*}
+	arch=${tag##*-}
+fi
+chroots='/var/lib/archbuild'
+clean_first=false
+
+usage() {
+	echo "Usage: $cmd [options] -- [makechrootpkg args]"
+	echo '    -h         This help'
+	echo '    -c         Recreate the chroot before building'
+	echo '    -r <dir>   Create chroots in this directory'
+	echo ''
+	echo "Default makechrootpkg args: ${makechrootpkg_args[*]}"
+	echo ''
+	exit 1
+}
+
+while getopts 'hcr:' arg; do
+	case "${arg}" in
+		c) clean_first=true ;;
+		r) chroots="$OPTARG" ;;
+		*) usage ;;
+	esac
+done
+
+check_root
+
+# Pass all arguments after -- right to makepkg
+makechrootpkg_args+=("${@:$OPTIND}")
+
+if ${clean_first} || [[ ! -d "${chroots}/${repo}-${arch}" ]]; then
+	msg "Creating chroot for [%s] (%s)..." "${repo}" "${arch}"
+
+	for copy in "${chroots}/${repo}-${arch}"/*; do
+		[[ -d $copy ]] || continue
+		msg2 "Deleting chroot copy '%s'..." "$(basename "${copy}")"
+
+		lock 9 "$copy.lock" "Locking chroot copy '%s'" "$copy"
+
+		subvolume_delete_recursive "${copy}"
+		rm -rf --one-file-system "${copy}"
+	done
+	lock_close 9
+
+	rm -rf --one-file-system "${chroots}/${repo}-${arch}"
+	mkdir -p "${chroots}/${repo}-${arch}"
+	setarch "${arch}" mkarchroot \
+		-C "@pkgdatadir@/pacman-${repo}.conf" \
+		-M "@pkgdatadir@/makepkg-${arch}.conf" \
+		"${chroots}/${repo}-${arch}/root" \
+		"${base_packages[@]}" || abort
+else
+	lock 9 "${chroots}/${repo}-${arch}/root.lock" "Locking clean chroot"
+	arch-nspawn \
+		-C "@pkgdatadir@/pacman-${repo}.conf" \
+		-M "@pkgdatadir@/makepkg-${arch}.conf" \
+		"${chroots}/${repo}-${arch}/root" \
+                pacman -Syu --noconfirm || abort
+fi
+
+msg "Building in chroot for [%s] (%s)..." "${repo}" "${arch}"
+exec makechrootpkg -r "${chroots}/${repo}-${arch}" "${makechrootpkg_args[@]}"

archco.in

@@ -0,0 +1,25 @@
+#!/bin/bash
+# License: Unspecified
+
+m4_include(lib/common.sh)
+
+scriptname=${0##*/}
+
+if [[ -z $1 ]]; then
+	printf 'Usage: %s <package name>...\n' "$scriptname"
+	exit 1
+fi
+
+case $scriptname in
+	archco)
+		SVNURL="svn+ssh://svn-packages@repos.archlinux.org/srv/repos/svn-packages/svn";;
+	communityco)
+		SVNURL="svn+ssh://svn-community@repos.archlinux.org/srv/repos/svn-community/svn";;
+	*)
+		die "Couldn't find svn url for %s" "$scriptname"
+		;;
+esac
+
+for i in "$@"; do
+	svn co "$SVNURL/$i"
+done

archrelease.in

@@ -0,0 +1,90 @@
+#!/bin/bash
+# License: Unspecified
+
+m4_include(lib/common.sh)
+m4_include(lib/valid-tags.sh)
+
+# parse command line options
+FORCE=
+while getopts ':f' flag; do
+	case $flag in
+		f) FORCE=1 ;;
+		:) die "Option requires an argument -- '%s'" "$OPTARG" ;;
+		\?) die "Invalid option -- '%s'" "$OPTARG" ;;
+	esac
+done
+shift $(( OPTIND - 1 ))
+
+if ! (( $# )); then
+	echo 'Usage: archrelease [-f] <repo>...'
+	exit 1
+fi
+
+# validate repo is really repo-arch
+if [[ -z $FORCE ]]; then
+	for tag in "$@"; do
+		if ! in_array "$tag" "${_tags[@]}"; then
+			die "archrelease: Invalid tag: '%s' (use -f to force release)" "$tag"
+		fi
+	done
+fi
+
+if [[ ! -f PKGBUILD ]]; then
+	die 'archrelease: PKGBUILD not found'
+fi
+
+trunk=${PWD##*/}
+
+# Normally this should be trunk, but it may be something
+# such as 'gnome-unstable'
+IFS='/' read -r -d '' -a parts <<< "$PWD"
+if [[ "${parts[*]:(-2):1}" == "repos" ]]; then
+	die 'archrelease: Should not be in repos dir (try from trunk/)'
+fi
+unset parts
+
+if [[ $(svn status -q) ]]; then
+	die 'archrelease: You have not committed your changes yet!'
+fi
+
+pushd .. >/dev/null
+IFS=$'\n' read -r -d '' -a known_files < <(svn ls -r HEAD "$trunk")
+for file in "${known_files[@]}"; do
+	if [[ ${file:(-1)} = '/' ]]; then
+		die "archrelease: subdirectories are not supported in package directories!"
+	fi
+done
+
+# gracefully handle files containing an "@" character
+known_files=("${known_files[@]/%/@}")
+
+# update repo directory first to avoid a commit failure
+svn up repos
+
+for tag in "$@"; do
+	stat_busy "Copying %s to %s" "${trunk}" "${tag}"
+
+	if [[ -d repos/$tag ]]; then
+		declare -a trash
+		trash=()
+		while read -r file; do
+			trash+=("repos/$tag/$file")
+		done < <(svn ls "repos/$tag")
+		[[ ${#trash[@]} == 0 ]] || svn rm -q "${trash[@]/%/@}"
+	else
+		mkdir -p "repos/$tag"
+		svn add --parents -q "repos/$tag"
+	fi
+
+	# copy all files at once from trunk to the subdirectory in repos/
+	svn copy -q -r HEAD "${known_files[@]/#/$trunk/}" "repos/$tag/"
+
+	stat_done
+done
+
+stat_busy "Releasing package"
+printf -v tag_list ", %s" "$@"; tag_list="${tag_list#, }"
+svn commit -q -m "archrelease: copy ${trunk} to $tag_list" || abort
+stat_done
+
+popd >/dev/null

archrm.in

@@ -0,0 +1,16 @@
+#!/bin/bash
+# License: Unspecified
+
+m4_include(lib/common.sh)
+
+if [[ -z $1 ]]; then
+	echo 'Usage: archrm <path to checkout>'
+	exit 1
+fi
+
+# FIXME: Check if there are uncommited changes
+#pushd $1
+#
+#popd
+
+rm -rf "$1"

bash_completion.in

@@ -0,0 +1,89 @@
+#!/hint/bash
+# License: Unspecified
+
+_devtools_compgen() {
+  local i r
+  COMPREPLY=($(compgen -W '$*' -- "$cur"))
+  for ((i=1; i < ${#COMP_WORDS[@]}-1; i++)); do
+    for r in "${!COMPREPLY[@]}"; do
+      if [[ ${COMP_WORDS[i]} = "${COMPREPLY[r]}" ]]; then
+        unset 'COMPREPLY[r]'; break
+      fi
+    done
+  done
+}
+
+_archco_pkg() {
+  _devtools_compgen "$(
+      command pacman "-$1"
+  )"
+}
+
+_archco() {
+  local cur prev 
+  COMPREPLY=()
+  cur=$(_get_cword)
+  prev=${COMP_WORDS[COMP_CWORD-1]}
+
+  _archco_pkg Slq
+  true
+} &&
+complete -F _archco archco communityco
+
+_makechrootpkg() {
+  local cur
+  COMPREPLY=()
+  _get_comp_words_by_ref cur
+
+  case $cur in
+    -*)
+       COMPREPLY=( $( compgen -W '-I -c -h -l -r -u' -- "$cur" ) )
+       ;;
+    *)
+      _filedir
+      return 0
+      ;;
+  esac
+
+  true
+} &&
+complete -F _makechrootpkg makechrootpkg
+
+_mkarchroot() {
+  local cur
+  COMPREPLY=()
+  _get_comp_words_by_ref cur
+
+  case $cur in
+    -*)
+       COMPREPLY=( $( compgen -W '-C -M -c -h' -- "$cur" ) )
+       ;;
+    *)
+      _filedir
+      return 0
+      ;;
+  esac
+
+  true
+} &&
+complete -F _mkarchroot mkarchroot
+
+_arch-nspawn() {
+  local cur
+  COMPREPLY=()
+  _get_comp_words_by_ref cur
+
+  case $cur in
+    -*)
+       COMPREPLY=( $( compgen -W '-C -M -c -h' -- "$cur" ) )
+       ;;
+    *)
+      _filedir
+      return 0
+      ;;
+  esac
+
+  true
+} &&
+complete -F _arch-nspawn arch-nspawn
+# ex:et ts=2 sw=2 ft=sh

checkpkg

@@ -1,87 +0,0 @@
-#!/bin/bash
-
-# Source makepkg.conf; fail if it is not found
-if [ -r "/etc/makepkg.conf" ]; then
-	source "/etc/makepkg.conf"
-else
-    echo "/etc/makepkg.conf not found!"
-    exit 1
-fi
-
-# Source user-specific makepkg.conf overrides
-if [ -r ~/.makepkg.conf ]; then
-	source ~/.makepkg.conf
-fi
-
-strip_url() {
-	echo $1 | sed 's|^.*://.*/||g'
-}
-
-if [ ! -f PKGBUILD ]; then
-	echo "This must be run in the directory of a built package."
-	exit 1
-fi
-
-source PKGBUILD
-
-pkgfile=${pkgname}-${pkgver}-${pkgrel}-${CARCH}.pkg.tar.gz
-oldstylepkgfile=${pkgname}-${pkgver}-${pkgrel}.pkg.tar.gz
-
-if [ -f "$(pwd)/$pkgfile" ]; then
-    pkgfile=$(pwd)/$pkgfile
-elif [ -f "$PKGDEST/$pkgfile" ]; then
-    pkgfile=$PKGDEST/$pkgfile
-elif [ -f "$(pwd)/$oldstylepkgfile" ]; then
-    pkgfile=$(pwd)/$oldstylepkgfile
-elif [ -f "$PKGDEST/$oldstylepkgfile" ]; then
-    pkgfile=$PKGDEST/$oldstylepkgfile
-else
-    echo "File \"$pkgfile\" doesn't exist"
-    exit 1
-fi
-
-tmp=`pacman -Spd --noconfirm $pkgname`
-
-if [ $? -ne 0 ]; then
-	echo "Couldn't download previous package."
-	exit 1
-fi
-
-pkgurl=`echo $tmp | rev | cut -d ' ' -f 1 | rev`
-
-oldpkg=`strip_url $pkgurl`
-
-if [ "$(basename $oldpkg)" = "$(basename $pkgfile)" ]; then
-	echo "The built package is the one in the repo right now!"
-	exit 1
-fi
-
-if [ ! -f $oldpkg ]; then
-	if echo $pkgurl | grep "^file:///" > /dev/null 2>&1; then
-		cp `echo $pkgurl | sed 's#^file://##'` .
-	else
-		wget $pkgurl
-	fi
-fi
-
-tar tzf $oldpkg > filelist-old
-tar tzf "$pkgfile" > filelist
-
-sort -o filelist filelist
-sort -o filelist-old filelist-old
-
-diff filelist-old filelist
-
-if diff filelist-old filelist | grep '\.so\.' > /dev/null 2>&1; then
-	mkdir -p pkg
-	cd pkg
-	tar xzf "$pkgfile" > /dev/null
-	for i in `diff ../filelist-old ../filelist | grep \> | grep \.so\. | awk '{print $2}'`; do
-		echo -n "${i}: "
-		objdump -p $i | grep SONAME
-	done
-else
-	echo "No filename differences"
-fi
-
-# vim:ft=sh:ts=4:sw=4:et:

checkpkg.in

@@ -0,0 +1,80 @@
+#!/bin/bash
+# License: Unspecified
+
+shopt -s extglob
+
+m4_include(lib/common.sh)
+
+# Source makepkg.conf; fail if it is not found
+if [[ -r '/etc/makepkg.conf' ]]; then
+	# shellcheck source=makepkg-x86_64.conf
+	source '/etc/makepkg.conf'
+else
+	die '/etc/makepkg.conf not found!'
+fi
+
+# Source user-specific makepkg.conf overrides
+if [[ -r "${XDG_CONFIG_HOME:-$HOME/.config}/pacman/makepkg.conf" ]]; then
+	# shellcheck source=/dev/null
+	source "${XDG_CONFIG_HOME:-$HOME/.config}/pacman/makepkg.conf"
+elif [[ -r "$HOME/.makepkg.conf" ]]; then
+	# shellcheck source=/dev/null
+	source "$HOME/.makepkg.conf"
+fi
+
+if [[ ! -f PKGBUILD ]]; then
+	die 'This must be run in the directory of a built package.'
+fi
+
+# shellcheck source=PKGBUILD.proto
+. ./PKGBUILD
+if [[ ${arch[0]} == 'any' ]]; then
+	CARCH='any'
+fi
+
+STARTDIR=$(pwd)
+TEMPDIR=$(mktemp -d --tmpdir checkpkg-script.XXXX)
+
+for _pkgname in "${pkgname[@]}"; do
+	target_pkgver=$(get_full_version "$_pkgname")
+	if ! pkgfile=$(find_cached_package "$_pkgname" "$target_pkgver" "$CARCH"); then
+		die 'tarball not found for package: %s' "${_pkgname}-$target_pkgver"
+	fi
+
+	ln -s "$pkgfile" "$TEMPDIR"
+
+	pkgurl=$(pacman -Spdd --print-format '%l' --noconfirm "$_pkgname") ||
+		die "Couldn't download previous package for %s." "$_pkgname"
+
+	oldpkg=${pkgurl##*://*/}
+
+	if [[ ${oldpkg##*/} = "${pkgfile##*/}" ]]; then
+		die "The built package (%s) is the one in the repo right now!" "$_pkgname"
+	fi
+
+	if [[ $pkgurl = file://* ]]; then
+		ln -s "${pkgurl#file://}" "$TEMPDIR/$oldpkg"
+	elif [[ -f "$PKGDEST/$oldpkg" ]]; then
+		ln -s "$PKGDEST/$oldpkg" "$TEMPDIR/$oldpkg"
+	elif [[ -f "$STARTDIR/$oldpkg" ]]; then
+		ln -s "$STARTDIR/$oldpkg" "$TEMPDIR/$oldpkg"
+	else
+		curl -fsLC - --retry 3 --retry-delay 3 -o "$TEMPDIR/$oldpkg" "$pkgurl"
+	fi
+
+	bsdtar tf "$TEMPDIR/$oldpkg" | sort > "$TEMPDIR/filelist-$_pkgname-old"
+	bsdtar tf "$pkgfile" | sort > "$TEMPDIR/filelist-$_pkgname"
+
+	sdiff -s "$TEMPDIR/filelist-$_pkgname-old" "$TEMPDIR/filelist-$_pkgname"
+
+	find-libprovides "$TEMPDIR/$oldpkg" 2>/dev/null | sort > "$TEMPDIR/libraries-$_pkgname-old"
+	find-libprovides "$pkgfile" 2>/dev/null | sort > "$TEMPDIR/libraries-$_pkgname"
+	if ! diff_output="$(sdiff -s "$TEMPDIR/libraries-$_pkgname-old" "$TEMPDIR/libraries-$_pkgname")"; then
+		msg "Sonames differ in $_pkgname!"
+		echo "$diff_output"
+	else
+		msg "No soname differences for %s." "$_pkgname"
+	fi
+done
+
+msg "Files saved to %s" "$TEMPDIR"

commitpkg.in

@@ -0,0 +1,210 @@
+#!/bin/bash
+# License: Unspecified
+
+m4_include(lib/common.sh)
+
+# Source makepkg.conf; fail if it is not found
+if [[ -r '/etc/makepkg.conf' ]]; then
+	# shellcheck source=makepkg-x86_64.conf
+	source '/etc/makepkg.conf'
+else
+	die '/etc/makepkg.conf not found!'
+fi
+
+# Source user-specific makepkg.conf overrides
+if [[ -r "${XDG_CONFIG_HOME:-$HOME/.config}/pacman/makepkg.conf" ]]; then
+	# shellcheck source=/dev/null
+	source "${XDG_CONFIG_HOME:-$HOME/.config}/pacman/makepkg.conf"
+elif [[ -r "$HOME/.makepkg.conf" ]]; then
+	# shellcheck source=/dev/null
+	source "$HOME/.makepkg.conf"
+fi
+
+cmd=${0##*/}
+
+if [[ ! -f PKGBUILD ]]; then
+	die 'No PKGBUILD file'
+fi
+
+source=()
+# shellcheck source=PKGBUILD.proto
+. ./PKGBUILD
+pkgbase=${pkgbase:-$pkgname}
+
+case "$cmd" in
+	commitpkg)
+		if (( $# == 0 )); then
+			die 'Usage: commitpkg <reponame> [-f] [-s server] [-l limit] [-a arch] [commit message]'
+		fi
+		repo="$1"
+		shift
+		;;
+	*pkg)
+		repo="${cmd%pkg}"
+		;;
+	*)
+		die 'Usage: commitpkg <reponame> [-f] [-s server] [-l limit] [-a arch] [commit message]'
+		;;
+esac
+
+# find files which should be under source control
+needsversioning=()
+for s in "${source[@]}"; do
+	[[ $s != *://* ]] && needsversioning+=("$s")
+done
+for i in 'changelog' 'install'; do
+	while read -r file; do
+		# evaluate any bash variables used
+		eval "file=\"$(sed "s/^\(['\"]\)\(.*\)\1\$/\2/" <<< "$file")\""
+		needsversioning+=("$file")
+	done < <(sed -n "s/^[[:space:]]*$i=//p" PKGBUILD)
+done
+
+# assert that they really are controlled by SVN
+if (( ${#needsversioning[*]} )); then
+	# svn status's output is only two columns when the status is unknown
+	while read -r status filename; do
+		[[ $status = '?' ]] && unversioned+=("$filename")
+	done < <(svn status -v "${needsversioning[@]}")
+	(( ${#unversioned[*]} )) && die "%s is not under version control" "${unversioned[@]}"
+fi
+
+rsyncopts=(-e ssh -p '--chmod=ug=rw,o=r' -c -h -L --progress --partial -y)
+archreleaseopts=()
+while getopts ':l:a:s:f' flag; do
+	case $flag in
+		f) archreleaseopts+=('-f') ;;
+		s) server=$OPTARG ;;
+		l) rsyncopts+=("--bwlimit=$OPTARG") ;;
+		a) commit_arch=$OPTARG ;;
+		:) die "Option requires an argument -- '%s'" "$OPTARG" ;;
+		\?) die "Invalid option -- '%s'" "$OPTARG" ;;
+	esac
+done
+shift $(( OPTIND - 1 ))
+
+# check packages have the packager field set
+for _arch in "${arch[@]}"; do
+	if [[ -n $commit_arch && ${_arch} != "$commit_arch" ]]; then
+		continue
+	fi
+	for _pkgname in "${pkgname[@]}"; do
+		fullver=$(get_full_version "$_pkgname")
+
+		if pkgfile=$(find_cached_package "$_pkgname" "$_arch" "$fullver"); then
+			if grep -q "packager = Unknown Packager" <(bsdtar -xOqf "$pkgfile" .PKGINFO); then
+				die "PACKAGER was not set when building package"
+			fi
+		fi
+	done
+done
+
+if [[ -z $server ]]; then
+	server='repos.archlinux.org'
+fi
+
+if [[ -n $(svn status -q) ]]; then
+	msgtemplate="upgpkg: $pkgbase $(get_full_version)"$'\n\n'
+	if [[ -n $1 ]]; then
+		stat_busy 'Committing changes to trunk'
+		svn commit -q -m "${msgtemplate}${1}" || die
+		stat_done
+	else
+		msgfile="$(mktemp)"
+		echo "$msgtemplate" > "$msgfile"
+		if [[ -n $SVN_EDITOR ]]; then
+			$SVN_EDITOR "$msgfile"
+		elif [[ -n $VISUAL ]]; then
+			$VISUAL "$msgfile"
+		elif [[ -n $EDITOR ]]; then
+			$EDITOR "$msgfile"
+		else
+			vi "$msgfile"
+		fi
+		[[ -s $msgfile ]] || die
+		stat_busy 'Committing changes to trunk'
+		svn commit -q -F "$msgfile" || die
+		unlink "$msgfile"
+		stat_done
+	fi
+fi
+
+declare -a uploads
+declare -a commit_arches
+declare -a skip_arches
+
+for _arch in "${arch[@]}"; do
+	if [[ -n $commit_arch && ${_arch} != "$commit_arch" ]]; then
+		skip_arches+=("$_arch")
+		continue
+	fi
+
+	for _pkgname in "${pkgname[@]}"; do
+		fullver=$(get_full_version "$_pkgname")
+
+		if ! pkgfile=$(find_cached_package "$_pkgname" "$fullver" "${_arch}"); then
+			warning "Skipping %s: failed to locate package file" "$_pkgname-$fullver-$_arch"
+			skip_arches+=("$_arch")
+			continue 2
+		fi
+		uploads+=("$pkgfile")
+
+		sigfile="${pkgfile}.sig"
+		if [[ ! -f $sigfile ]]; then
+			msg "Signing package %s..." "${pkgfile}"
+			if [[ -n $GPGKEY ]]; then
+				SIGNWITHKEY=(-u "${GPGKEY}")
+			fi
+			gpg --detach-sign --use-agent --no-armor "${SIGNWITHKEY[@]}" "${pkgfile}" || die
+		fi
+		if ! gpg --verify "$sigfile" >/dev/null 2>&1; then
+			die "Signature %s.sig is incorrect!" "$pkgfile"
+		fi
+		uploads+=("$sigfile")
+	done
+done
+
+for _arch in "${arch[@]}"; do
+	if ! in_array "$_arch" "${skip_arches[@]}"; then
+		commit_arches+=("$_arch")
+	fi
+done
+
+if [[ ${#commit_arches[*]} -gt 0 ]]; then
+	archrelease "${archreleaseopts[@]}" "${commit_arches[@]/#/$repo-}" || die
+fi
+
+if [[ ${#uploads[*]} -gt 0 ]]; then
+	new_uploads=()
+
+	# convert to absolute paths so rsync can work with colons (epoch)
+	while read -r -d '' upload; do
+		new_uploads+=("$upload")
+	done < <(realpath -z "${uploads[@]}")
+
+	uploads=("${new_uploads[@]}")
+	unset new_uploads
+	msg 'Uploading all package and signature files'
+	rsync "${rsyncopts[@]}" "${uploads[@]}" "$server:staging/$repo/" || die
+fi
+
+if [[ "${arch[*]}" == 'any' ]]; then
+	if [[ -d ../repos/$repo-i686 && -d ../repos/$repo-x86_64 ]]; then
+		pushd ../repos/ >/dev/null
+		stat_busy "Removing %s and %s" "$repo-i686" "$repo-x86_64"
+		svn rm -q "$repo-i686"
+		svn rm -q "$repo-x86_64"
+		svn commit -q -m "Removed $repo-i686 and $repo-x86_64 for $pkgname"
+		stat_done
+		popd >/dev/null
+	fi
+else
+	if [[ -d ../repos/$repo-any ]]; then
+		pushd ../repos/ >/dev/null
+		stat_busy "Removing %s" "$repo-any"
+		svn rm -q "$repo-any"
+		svn commit -q -m "Removed $repo-any for $pkgname"
+		stat_done
+		popd >/dev/null
+	fi
+fi

crossrepomove.in

@@ -0,0 +1,86 @@
+#!/bin/bash
+# License: Unspecified
+
+m4_include(lib/common.sh)
+
+scriptname=${0##*/}
+
+if [[ -z $1 ]]; then
+	printf 'Usage: %s [pkgbase]\n' "$scriptname"
+	exit 1
+fi
+
+pkgbase="${1}"
+
+case $scriptname in
+	extra2community)
+		source_name='packages'
+		target_name='community'
+		source_repo='extra'
+		target_repo='community'
+		;;
+	community2extra)
+		source_name='community'
+		target_name='packages'
+		source_repo='community'
+		target_repo='extra'
+		;;
+	*)
+		die "Couldn't find configuration for %s" "$scriptname"
+		;;
+esac
+
+server='repos.archlinux.org'
+source_svn="svn+ssh://svn-${source_name}@${server}/srv/repos/svn-${source_name}/svn"
+target_svn="svn+ssh://svn-${target_name}@${server}/srv/repos/svn-${target_name}/svn"
+source_dbscripts="/srv/repos/svn-${source_name}/dbscripts"
+target_dbscripts="/srv/repos/svn-${target_name}/dbscripts"
+
+setup_workdir
+
+pushd "$WORKDIR" >/dev/null
+
+msg "Downloading sources for %s" "${pkgbase}"
+svn -q checkout -N "${target_svn}" target_checkout
+mkdir -p "target_checkout/${pkgbase}/repos"
+svn -q export "${source_svn}/${pkgbase}/trunk" "target_checkout/${pkgbase}/trunk" || die
+# shellcheck source=PKGBUILD.proto
+. "target_checkout/${pkgbase}/trunk/PKGBUILD"
+
+msg "Downloading packages for %s" "${pkgbase}"
+for _arch in "${arch[@]}"; do
+	if [[ "${_arch[*]}" == 'any' ]]; then
+		repo_arch='x86_64'
+	else
+		repo_arch=${_arch}
+	fi
+	for _pkgname in "${pkgname[@]}"; do
+		fullver=$(get_full_version "$_pkgname")
+		pkgpath="/srv/ftp/$source_repo/os/$repo_arch/$_pkgname-$fullver-${_arch}.pkg.tar.*"
+		# shellcheck disable=2029
+		ssh "$server" "cp $pkgpath staging/$target_repo" || die
+	done
+done
+
+msg "Adding %s to %s" "${pkgbase}" "${target_repo}"
+svn -q add "target_checkout/${pkgbase}"
+svn -q propset svn:keywords 'Id' "target_checkout/${pkgbase}/trunk/PKGBUILD"
+svn -q commit -m"${scriptname}: Moving ${pkgbase} from ${source_repo} to ${target_repo}" target_checkout
+pushd "target_checkout/${pkgbase}/trunk" >/dev/null
+archrelease "${arch[@]/#/$target_repo-}" || die
+popd >/dev/null
+
+# shellcheck disable=2029
+ssh "${server}" "${target_dbscripts}/db-update" || die
+
+msg "Removing %s from %s" "${pkgbase}" "${source_repo}"
+for _arch in "${arch[@]}"; do
+	# shellcheck disable=2029
+	ssh "${server}" "${source_dbscripts}/db-remove ${source_repo} ${_arch} ${pkgbase}"
+done
+svn -q checkout -N "${source_svn}" source_checkout
+svn -q up "source_checkout/${pkgbase}"
+svn -q rm "source_checkout/${pkgbase}"
+svn -q commit -m"${scriptname}: Moving ${pkgbase} from ${source_repo} to ${target_repo}" source_checkout
+
+popd >/dev/null

extrapkg

@@ -1,132 +0,0 @@
-#!/bin/bash
-
-# Source makepkg.conf; fail if it is not found
-if [ -r "/etc/makepkg.conf" ]; then
-	source "/etc/makepkg.conf"
-else
-    echo "/etc/makepkg.conf not found!"
-    exit 1
-fi
-
-# Source user-specific makepkg.conf overrides
-if [ -r ~/.makepkg.conf ]; then
-	source ~/.makepkg.conf
-fi
-
-cmd=`basename $0`
-
-if [ ! -f PKGBUILD ]; then
-    echo "No PKGBUILD file"
-    exit 1
-fi
-
-# define tags and staging areas based on architecture
-if [ "$CARCH" = "i686" ]; then
-    currenttag='CURRENT'
-    testingtag='TESTING'
-    suffix=''
-elif [ "$CARCH" = "x86_64" ]; then
-    currenttag='CURRENT-64'
-    testingtag='TESTING-64'
-    suffix='64'
-else
-    echo "CARCH must be set to a recognized value!"
-    exit 1
-fi
-
-source PKGBUILD
-pkgfile=${pkgname}-${pkgver}-${pkgrel}-${CARCH}.pkg.tar.gz
-oldstylepkgfile=${pkgname}-${pkgver}-${pkgrel}.pkg.tar.gz
-
-if [ ! -f $pkgfile ]; then
-    if [ -f $PKGDEST/$pkgfile ]; then
-        pkgfile=$PKGDEST/$pkgfile
-        oldstylepkgfile=$PKGDEST/$oldstylepkgfile
-    elif [ -f $oldstylepkgfile ]; then
-        pkgfile=$oldstylepkgfile
-    elif [ -f $PKGDEST/$oldstylepkgfile ]; then
-        pkgfile=$PKGDEST/$oldstylepkgfile
-    else
-        echo "File $pkgfile doesn't exist"
-        exit 1
-    fi
-fi
-
-if [ "$cmd" == "extrapkg" ]; then
-    repo="extra"
-    tag="$currenttag"
-elif [ "$cmd" == "corepkg" ]; then
-    repo="core"
-    tag="$currenttag"
-elif [ "$cmd" == "testingpkg" ]; then
-    repo="testing"
-    tag="$testingtag"
-elif [ "$cmd" == "unstablepkg" ]; then
-    repo="unstable"
-    tag="$currenttag"
-elif [ "$cmd" == "communitypkg" ]; then
-    repo="community"
-    tag="$currenttag"
-fi
-
-# see if any limit options were passed, we'll send them to SCP
-unset scpopts
-if [ "$1" = "-l" ]; then
-    scpopts="$1 $2"
-    shift 2
-fi
-
-if [ "$repo" != "community" ]; then
-    # combine what we know into a variable (suffix defined based on $CARCH)
-    uploadto="staging/${repo}${suffix}/add/$(basename ${pkgfile})"
-    scp ${scpopts} "${pkgfile}" "archlinux.org:${uploadto}"
-    if [ "$(md5sum "${pkgfile}" | cut -d' ' -f1)" != "$(ssh archlinux.org md5sum "${uploadto}" | cut -d' ' -f1)" ]; then
-        echo "File got corrupted during upload, cancelled."
-        exit 1
-    else
-        echo "File integrity okay."
-    fi
-else
-    if [ ! -f ~/.tupkg ]; then
-        echo "Must configure tupkg via ~/.tupkg, cancelled"
-        exit 1
-    fi
-    if [ "$(basename $pkgfile)" != "$(basename $oldstylepkgfile)" ]; then
-        echo "Renaming makepkg3 package for compatability"
-        mv $pkgfile $oldstylepkgfile
-        pkgfile=$oldstylepkgfile
-    fi
-    tupkg $pkgfile
-fi
-if [ $? -ne 0 ]; then
-    echo "Cancelled"
-    exit 1
-fi
-echo "===> Uploaded $pkgfile"
-
-if [ "$1" != "" ]; then
-    cvs commit -m "upgpkg: $pkgname $pkgver-$pkgrel
-    $1" > /dev/null
-    if [ $? -ne 0 ]; then
-        echo "Cancelled"
-        exit 1
-    fi
-    echo "===> Commited with \"upgpkg: $pkgname $pkgver-$pkgrel
-    $1\" message"
-else
-    cvs commit -m "upgpkg: $pkgname $pkgver-$pkgrel" > /dev/null
-    if [ $? -ne 0 ]; then
-        echo "Cancelled"
-        exit 1
-    fi
-    echo "===> Commited with \"upgpkg: $pkgname $pkgver-$pkgrel\" message"
-fi
-
-cvs tag -c -F -R $tag > /dev/null
-if [ $? -ne 0 ]; then
-    echo "Cancelled"
-    exit 1
-fi
-echo "===> Tagged as $tag"
-
-# vim:ft=sh:ts=4:sw=4:et:

find-libdeps.in

@@ -0,0 +1,88 @@
+#!/bin/bash
+# License: Unspecified
+
+m4_include(lib/common.sh)
+
+set -e
+shopt -s extglob
+
+IGNORE_INTERNAL=0
+
+if [[ $1 = "--ignore-internal" ]]; then
+	IGNORE_INTERNAL=1
+	shift
+fi
+
+script_mode=${0##*/find-lib}
+
+case $script_mode in
+	deps|provides) true;;
+	*) die "Unknown mode %s" "$script_mode" ;;
+esac
+
+if [[ -z $1 ]]; then
+	echo "${0##*/} [options] <package file|extracted package dir>"
+	echo "Options:"
+	echo "    --ignore-internal      ignore internal libraries"
+	exit 1
+fi
+
+if [[ -d $1 ]]; then
+	pushd "$1" >/dev/null
+else
+	setup_workdir
+
+	case ${script_mode} in
+		deps) bsdtar -C "$WORKDIR" -xf "$1";;
+		provides) bsdtar -C "$WORKDIR" -xf "$1" --include="*.so*";;
+	esac
+
+	pushd "$WORKDIR" >/dev/null
+fi
+
+process_sofile() {
+	# extract the library name: libfoo.so
+	soname="${sofile%.so?(+(.+([0-9])))}".so
+	# extract the major version: 1
+	soversion="${sofile##*\.so\.}"
+	if [[ "$soversion" = "$sofile" ]] && ((IGNORE_INTERNAL)); then
+		continue
+	fi
+	if ! in_array "${soname}=${soversion}-${soarch}" "${soobjects[@]}"; then
+		# libfoo.so=1-64
+		echo "${soname}=${soversion}-${soarch}"
+		soobjects+=("${soname}=${soversion}-${soarch}")
+	fi
+}
+
+case $script_mode in
+	deps) find_args=(-perm -u+x);;
+  provides) find_args=(-name '*.so*');;
+esac
+
+find . -type f "${find_args[@]}" | while read -r filename; do
+	if [[ $script_mode = "provides" ]]; then
+		# ignore if we don't have a shared object
+		if ! LC_ALL=C readelf -h "$filename" 2>/dev/null | grep -q '.*Type:.*DYN (Shared object file).*'; then
+			continue
+		fi
+	fi
+
+	# get architecture of the file; if soarch is empty it's not an ELF binary
+	soarch=$(LC_ALL=C readelf -h "$filename" 2>/dev/null | sed -n 's/.*Class.*ELF\(32\|64\)/\1/p')
+	[[ -n $soarch ]] || continue
+
+	if [[ $script_mode = "provides" ]]; then
+		# get the string binaries link to: libfoo.so.1.2 -> libfoo.so.1
+		sofile=$(LC_ALL=C readelf -d "$filename" 2>/dev/null | sed -n 's/.*Library soname: \[\(.*\)\].*/\1/p')
+		[[ -z $sofile ]] && sofile="${filename##*/}"
+		process_sofile
+	elif [[ $script_mode = "deps" ]]; then
+		# process all libraries needed by the binary
+		for sofile in $(LC_ALL=C readelf -d "$filename" 2>/dev/null | sed -nr 's/.*Shared library: \[(.*)\].*/\1/p'); do
+			process_sofile
+		done
+	fi
+done
+
+popd >/dev/null

finddeps

@@ -1,41 +0,0 @@
-#!/bin/bash
-#
-# finddeps - find packages that depend on a given depname
-#
-
-if [ "$1" = "" ]; then
-    echo "usage: finddeps <depname>"
-    echo ""
-    echo "Find packages that depend on a given depname."
-    echo "Run this script from the top-level directory of your ABS tree."
-    echo ""
-    exit 0
-fi
-
-match=$1
-tld=$(pwd)
-
-for d in $(find . -type d); do
-    cd $d
-    if [ -f PKGBUILD ]; then
-        unset pkgname depends makedepends
-        . PKGBUILD
-        for dep in "${depends[@]}"; do
-            # lose the version comaparator, if any
-            depname=${dep%%[<>=]*}
-            if [ "$depname" = "$match" ]; then
-                echo "$d (depends)"
-            fi
-        done
-        for dep in "${makedepends[@]}"; do
-            # lose the version comaparator, if any
-            depname=${dep%%[<>=]*}
-            if [ "$depname" = "$match" ]; then
-                echo "$d (makedepends)"
-            fi
-        done
-    fi
-    cd $tld
-done
-
-# vim:ft=sh:ts=4:sw=4:et:

finddeps.in

@@ -0,0 +1,41 @@
+#!/bin/bash
+#
+# finddeps - find packages that depend on a given depname
+#
+# License: Unspecified
+
+m4_include(lib/common.sh)
+
+match=$1
+
+if [[ -z $match ]]; then
+	echo 'Usage: finddeps <depname>'
+	echo ''
+	echo 'Find packages that depend on a given depname.'
+	echo 'Run this script from the top-level directory of your ABS tree.'
+	echo ''
+	exit 1
+fi
+
+find . -type d | while read -r d; do
+	if [[ -f "$d/PKGBUILD" ]]; then
+		pkgname=() depends=() makedepends=() optdepends=()
+		# shellcheck source=PKGBUILD.proto
+		. "$d/PKGBUILD"
+		for dep in "${depends[@]}"; do
+			# lose the version comparator, if any
+			depname=${dep%%[<>=]*}
+			[[ $depname = "$match" ]] && echo "$d (depends)"
+		done
+		for dep in "${makedepends[@]}"; do
+			# lose the version comparator, if any
+			depname=${dep%%[<>=]*}
+			[[ $depname = "$match" ]] && echo "$d (makedepends)"
+		done
+		for dep in "${optdepends[@]/:*}"; do
+			# lose the version comaparator, if any
+			depname=${dep%%[<>=]*}
+			[[ $depname = "$match" ]] && echo "$d (optdepends)"
+		done
+	fi
+done

lddd

@@ -1,47 +0,0 @@
-#!/bin/sh
-#
-# lddd - find broken library links on your machine
-#
-
-ifs=$IFS
-IFS=':'
-
-libdirs="/lib:/usr/lib:/opt/qt/lib:/opt/kde/lib:/usr/lib/libfakeroot:/opt/NX/lib"
-extras=
-
-TEMPDIR=$(mktemp /tmp/lddd-script.XXXX)
-rm $TEMPDIR
-mkdir -p $TEMPDIR
-
-echo " Go out and drink some tea, this will take a while :) ..."
-#  Check ELF binaries in the PATH and specified dir trees.
-for tree in $PATH $libdirs $extras
-do
-    echo DIR $tree
-
-    #  Get list of files in tree.
-    files=$(find $tree -type f ! -name '*.a' ! -name '*.la' ! -name '*.py*' ! -name '*.txt' ! -name '*.h' ! -name '*.ttf' ! -name '*.rb' ! -name '*.ko' ! -name '*.pc' ! -name '*.enc' ! -name '*.cf' ! -name '*.def' ! -name '*.rules' ! -name '*.cmi' ! -name  '*.mli' ! -name '*.ml' ! -name '*.cma' ! -name '*.cmx' ! -name '*.cmxa' ! -name '*.pod' ! -name '*.pm' ! -name '*.pl' ! -name '*.al' ! -name '*.tcl' ! -name '*.bs' ! -name '*.o' ! -name '*.png' ! -name '*.gif' ! -name '*.cmo' ! -name '*.cgi' ! -name '*.defs' ! -name '*.conf' ! -name '*_LOCALE' ! -name 'Compose' ! -name '*_OBJS' ! -name '*.msg' ! -name '*.mcopclass' ! -name '*.mcoptype')
-    IFS=$ifs
-    for i in $files
-    do
-        if [ `file $i | grep -c 'ELF'` -ne 0 ]; then
-            #  Is an ELF binary.
-            if [ `ldd $i 2>/dev/null | grep -c 'not found'` -ne 0 ]; then
-                #  Missing lib.
-                echo "$i:" >> $TEMPDIR/raw.txt
-                ldd $i 2>/dev/null | grep 'not found' >> $TEMPDIR/raw.txt
-            fi
-        fi
-    done
-done
-grep '^/' $TEMPDIR/raw.txt | sed -e 's/://g' >> $TEMPDIR/affected-files.txt
-# invoke pacman
-for i in $(cat $TEMPDIR/affected-files.txt); do
-    pacman -Qo $i | awk '{print $4,$5}' >> $TEMPDIR/pacman.txt
-done
-# clean list
-sort -u $TEMPDIR/pacman.txt >> $TEMPDIR/possible-rebuilds.txt
-
-echo "Files saved to $TEMPDIR"
-
-# vim:ft=sh:ts=4:sw=4:et:

lddd.in

@@ -0,0 +1,49 @@
+#!/bin/bash
+#
+# lddd - find broken library links on your machine
+#
+# License: Unspecified
+
+m4_include(lib/common.sh)
+
+ifs=$IFS
+IFS="${IFS}:"
+
+libdirs="/lib /usr/lib /usr/local/lib $(cat /etc/ld.so.conf.d/*)"
+extras=
+
+TEMPDIR=$(mktemp -d --tmpdir lddd-script.XXXX)
+
+msg 'Go out and drink some tea, this will take a while :) ...'
+#  Check ELF binaries in the PATH and specified dir trees.
+for tree in $PATH $libdirs $extras; do
+	msg2 "DIR %s" "$tree"
+
+	#  Get list of files in tree.
+	files=$(find "$tree" -type f ! -name '*.a' ! -name '*.la' ! -name '*.py*' ! -name '*.txt' ! -name '*.h' ! -name '*.ttf' ! \
+	-name '*.rb' ! -name '*.ko' ! -name '*.pc' ! -name '*.enc' ! -name '*.cf' ! -name '*.def' ! -name '*.rules' ! -name \
+	'*.cmi' ! -name  '*.mli' ! -name '*.ml' ! -name '*.cma' ! -name '*.cmx' ! -name '*.cmxa' ! -name '*.pod' ! -name '*.pm' \
+	! -name '*.pl' ! -name '*.al' ! -name '*.tcl' ! -name '*.bs' ! -name '*.o' ! -name '*.png' ! -name '*.gif' ! -name '*.cmo' \
+	! -name '*.cgi' ! -name '*.defs' ! -name '*.conf' ! -name '*_LOCALE' ! -name 'Compose' ! -name '*_OBJS' ! -name '*.msg' ! \
+	-name '*.mcopclass' ! -name '*.mcoptype')
+	IFS=$ifs
+	for i in $files; do
+		if (( $(file "$i" | grep -c 'ELF') != 0 )); then
+			#  Is an ELF binary.
+			if (( $(ldd "$i" 2>/dev/null | grep -c 'not found') != 0 )); then
+				#  Missing lib.
+				echo "$i:" >> "$TEMPDIR/raw.txt"
+				ldd "$i" 2>/dev/null | grep 'not found' >> "$TEMPDIR/raw.txt"
+			fi
+		fi
+	done
+done
+grep '^/' "$TEMPDIR/raw.txt" | sed -e 's/://g' >> "$TEMPDIR/affected-files.txt"
+# invoke pacman
+while read -r i; do
+	pacman -Qo "$i" | awk '{print $4,$5}' >> "$TEMPDIR/pacman.txt"
+done < "$TEMPDIR/affected-files.txt"
+# clean list
+sort -u "$TEMPDIR/pacman.txt" >> "$TEMPDIR/possible-rebuilds.txt"
+
+msg "Files saved to %s" "$TEMPDIR"

lib/archroot.sh

@@ -0,0 +1,67 @@
+#!/hint/bash
+# License: Unspecified
+:
+
+# shellcheck disable=2034
+CHROOT_VERSION='v4'
+
+##
+#  usage : check_root
+##
+orig_argv=("$0" "$@")
+check_root() {
+	(( EUID == 0 )) && return
+	if type -P sudo >/dev/null; then
+		exec sudo -- "${orig_argv[@]}"
+	else
+		exec su root -c "$(printf ' %q' "${orig_argv[@]}")"
+	fi
+}
+
+##
+#  usage : is_btrfs( $path )
+# return : whether $path is on a btrfs
+##
+is_btrfs() {
+	[[ -e "$1" && "$(stat -f -c %T "$1")" == btrfs ]]
+}
+
+##
+#  usage : is_subvolume( $path )
+# return : whether $path is a the root of a btrfs subvolume (including
+#          the top-level subvolume).
+##
+is_subvolume() {
+	[[ -e "$1" && "$(stat -f -c %T "$1")" == btrfs && "$(stat -c %i "$1")" == 256 ]]
+}
+
+##
+#  usage : is_same_fs( $path_a, $path_b )
+# return : whether $path_a and $path_b are on the same filesystem
+##
+is_same_fs() {
+	[[ "$(stat -c %d "$1")" == "$(stat -c %d "$1")" ]]
+}
+
+##
+#  usage : subvolume_delete_recursive( $path )
+#
+#    Find all btrfs subvolumes under and including $path and delete them.
+##
+subvolume_delete_recursive() {
+	local subvol
+
+	is_subvolume "$1" || return 0
+
+	while IFS= read -d $'\0' -r subvol; do
+		if ! subvolume_delete_recursive "$subvol"; then
+			return 1
+		fi
+	done < <(find "$1" -mindepth 1 -xdev -depth -inum 256 -print0)
+	if ! btrfs subvolume delete "$1" &>/dev/null; then
+		error "Unable to delete subvolume %s" "$subvol"
+		return 1
+	fi
+
+	return 0
+}

lib/common.sh

@@ -0,0 +1,270 @@
+#!/hint/bash
+# This may be included with or without `set -euE`
+
+# License: Unspecified
+
+[[ -z ${_INCLUDE_COMMON_SH:-} ]] || return 0
+_INCLUDE_COMMON_SH=true
+
+# Avoid any encoding problems
+export LANG=C
+
+shopt -s extglob
+
+# check if messages are to be printed using color
+declare ALL_OFF='' BOLD='' BLUE='' GREEN='' RED='' YELLOW=''
+if [[ -t 2 ]]; then
+	# prefer terminal safe colored and bold text when tput is supported
+	if tput setaf 0 &>/dev/null; then
+		ALL_OFF="$(tput sgr0)"
+		BOLD="$(tput bold)"
+		BLUE="${BOLD}$(tput setaf 4)"
+		GREEN="${BOLD}$(tput setaf 2)"
+		RED="${BOLD}$(tput setaf 1)"
+		YELLOW="${BOLD}$(tput setaf 3)"
+	else
+		ALL_OFF="\e[1;0m"
+		BOLD="\e[1;1m"
+		BLUE="${BOLD}\e[1;34m"
+		GREEN="${BOLD}\e[1;32m"
+		RED="${BOLD}\e[1;31m"
+		YELLOW="${BOLD}\e[1;33m"
+	fi
+fi
+readonly ALL_OFF BOLD BLUE GREEN RED YELLOW
+
+plain() {
+	local mesg=$1; shift
+	# shellcheck disable=2059
+	printf "${BOLD}    ${mesg}${ALL_OFF}\n" "$@" >&2
+}
+
+msg() {
+	local mesg=$1; shift
+	# shellcheck disable=2059
+	printf "${GREEN}==>${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
+}
+
+msg2() {
+	local mesg=$1; shift
+	# shellcheck disable=2059
+	printf "${BLUE}  ->${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
+}
+
+warning() {
+	local mesg=$1; shift
+	# shellcheck disable=2059
+	printf "${YELLOW}==> WARNING:${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
+}
+
+error() {
+	local mesg=$1; shift
+	# shellcheck disable=2059
+	printf "${RED}==> ERROR:${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
+}
+
+stat_busy() {
+	local mesg=$1; shift
+	# shellcheck disable=2059
+	printf "${GREEN}==>${ALL_OFF}${BOLD} ${mesg}...${ALL_OFF}" "$@" >&2
+}
+
+stat_done() {
+	# shellcheck disable=2059
+	printf "${BOLD}done${ALL_OFF}\n" >&2
+}
+
+_setup_workdir=false
+setup_workdir() {
+	[[ -z ${WORKDIR:-} ]] && WORKDIR=$(mktemp -d --tmpdir "${0##*/}.XXXXXXXXXX")
+	_setup_workdir=true
+	trap 'trap_abort' INT QUIT TERM HUP
+	trap 'trap_exit' EXIT
+}
+
+cleanup() {
+	if [[ -n ${WORKDIR:-} ]] && $_setup_workdir; then
+		rm -rf "$WORKDIR"
+	fi
+	exit "${1:-0}"
+}
+
+abort() {
+	error 'Aborting...'
+	cleanup 255
+}
+
+trap_abort() {
+	trap - EXIT INT QUIT TERM HUP
+	abort
+}
+
+trap_exit() {
+	local r=$?
+	trap - EXIT INT QUIT TERM HUP
+	cleanup $r
+}
+
+die() {
+	(( $# )) && error "$@"
+	cleanup 255
+}
+
+##
+#  usage : in_array( $needle, $haystack )
+# return : 0 - found
+#          1 - not found
+##
+in_array() {
+	local needle=$1; shift
+	local item
+	for item in "$@"; do
+		[[ $item = "$needle" ]] && return 0 # Found
+	done
+	return 1 # Not Found
+}
+
+##
+#  usage : get_full_version( [$pkgname] )
+# return : full version spec, including epoch (if necessary), pkgver, pkgrel
+##
+get_full_version() {
+	# set defaults if they weren't specified in buildfile
+	local pkgbase=${pkgbase:-${pkgname[0]}}
+	local epoch=${epoch:-0}
+	local pkgver=${pkgver}
+	local pkgrel=${pkgrel}
+	if [[ -z $1 ]]; then
+		if (( ! epoch )); then
+			printf '%s\n' "$pkgver-$pkgrel"
+		else
+			printf '%s\n' "$epoch:$pkgver-$pkgrel"
+		fi
+	else
+		local pkgver_override='' pkgrel_override='' epoch_override=''
+		for i in pkgver pkgrel epoch; do
+			local indirect="${i}_override"
+			eval "$(declare -f "package_$1" | sed -n "s/\(^[[:space:]]*$i=\)/${i}_override=/p")"
+			[[ -z ${!indirect} ]] && eval ${indirect}=\"${!i}\"
+		done
+		if (( ! epoch_override )); then
+			printf '%s\n' "$pkgver_override-$pkgrel_override"
+		else
+			printf '%s\n' "$epoch_override:$pkgver_override-$pkgrel_override"
+		fi
+	fi
+}
+
+##
+#  usage : lock( $fd, $file, $message, [ $message_arguments... ] )
+##
+lock() {
+	# Only reopen the FD if it wasn't handed to us
+	if ! [[ "/dev/fd/$1" -ef "$2" ]]; then
+		mkdir -p -- "$(dirname -- "$2")"
+		eval "exec $1>"'"$2"'
+	fi
+
+	if ! flock -n "$1"; then
+		stat_busy "${@:3}"
+		flock "$1"
+		stat_done
+	fi
+}
+
+##
+#  usage : slock( $fd, $file, $message, [ $message_arguments... ] )
+##
+slock() {
+	# Only reopen the FD if it wasn't handed to us
+	if ! [[ "/dev/fd/$1" -ef "$2" ]]; then
+		mkdir -p -- "$(dirname -- "$2")"
+		eval "exec $1>"'"$2"'
+	fi
+
+	if ! flock -sn "$1"; then
+		stat_busy "${@:3}"
+		flock -s "$1"
+		stat_done
+	fi
+}
+
+##
+#  usage : lock_close( $fd )
+##
+lock_close() {
+	local fd=$1
+	# https://github.com/koalaman/shellcheck/issues/862
+	# shellcheck disable=2034
+	exec {fd}>&-
+}
+
+##
+# usage: pkgver_equal( $pkgver1, $pkgver2 )
+##
+pkgver_equal() {
+	if [[ $1 = *-* && $2 = *-* ]]; then
+		# if both versions have a pkgrel, then they must be an exact match
+		[[ $1 = "$2" ]]
+	else
+		# otherwise, trim any pkgrel and compare the bare version.
+		[[ ${1%%-*} = "${2%%-*}" ]]
+	fi
+}
+
+##
+#  usage: find_cached_package( $pkgname, $pkgver, $arch )
+#
+#    $pkgver can be supplied with or without a pkgrel appended.
+#    If not supplied, any pkgrel will be matched.
+##
+find_cached_package() {
+	local searchdirs=("$PWD" "$PKGDEST") results=()
+	local targetname=$1 targetver=$2 targetarch=$3
+	local dir pkg pkgbasename name ver rel arch r results
+
+	for dir in "${searchdirs[@]}"; do
+		[[ -d $dir ]] || continue
+
+		for pkg in "$dir"/*.pkg.tar?(.?z); do
+			[[ -f $pkg ]] || continue
+
+			# avoid adding duplicates of the same inode
+			for r in "${results[@]}"; do
+				[[ $r -ef $pkg ]] && continue 2
+			done
+
+			# split apart package filename into parts
+			pkgbasename=${pkg##*/}
+			pkgbasename=${pkgbasename%.pkg.tar?(.?z)}
+
+			arch=${pkgbasename##*-}
+			pkgbasename=${pkgbasename%-"$arch"}
+
+			rel=${pkgbasename##*-}
+			pkgbasename=${pkgbasename%-"$rel"}
+
+			ver=${pkgbasename##*-}
+			name=${pkgbasename%-"$ver"}
+
+			if [[ $targetname = "$name" && $targetarch = "$arch" ]] &&
+					pkgver_equal "$targetver" "$ver-$rel"; then
+				results+=("$pkg")
+			fi
+		done
+	done
+
+	case ${#results[*]} in
+		0)
+			return 1
+			;;
+		1)
+			printf '%s\n' "${results[0]}"
+			return 0
+			;;
+		*)
+			error 'Multiple packages found:'
+			printf '\t%s\n' "${results[@]}" >&2
+			return 1
+	esac
+}

lib/valid-tags.sh

@@ -0,0 +1,26 @@
+#!/hint/bash
+# License: Unspecified
+:
+
+# shellcheck disable=2034
+_arch=(
+	i686
+	x86_64
+	any
+)
+
+# shellcheck disable=2034
+_tags=(
+	core-i686 core-x86_64 core-any
+	extra-i686 extra-x86_64 extra-any
+	multilib-x86_64
+	staging-i686 staging-x86_64 staging-any
+	testing-i686 testing-x86_64 testing-any
+	multilib-testing-x86_64
+	multilib-staging-x86_64
+	community-i686 community-x86_64 community-any
+	community-staging-i686 community-staging-x86_64 community-staging-any
+	community-testing-i686 community-testing-x86_64 community-testing-any
+	kde-unstable-i686 kde-unstable-x86_64 kde-unstable-any
+	gnome-unstable-i686 gnome-unstable-x86_64 gnome-unstable-any
+)

makechrootpkg

@@ -1,208 +0,0 @@
-#!/bin/bash
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-FORCE="n"
-RUN=""
-MAKEPKG_ARGS="-sr"
-REPACK=""
-WORKDIR=$PWD
-clean_first="0"
-
-chrootdir="$CHROOT_SHELL"
-
-APPNAME=$(basename "${0}")
-
-usage ()
-{
-    echo "usage ${APPNAME} [-h] [-c] [-r CHROOT_SHELL] [--] [makepkg args]"
-    echo " Run this script in a PKGBUILD dir to build a package inside a"
-    echo " clean chroot. All unrecognized arguments passed to this script"
-    echo " will be passed to makepkg."
-    echo ""
-    echo "The \$CHROOT_SHELL environment variable is used to determine where"
-    echo " your chroot shell is. The shell consists of the following"
-    echo " directories: \$CHROOT_SHELL/{root, rw, union} but only 'root' is"
-    echo " required by default. The rest will be created as needed"
-    echo ""
-    echo "The -c flag, if specified, will remove all files created by previous"
-    echo "builds using makechrootpkg.  This will ensure a clean chroot is used."
-    echo ""
-    echo "The chroot shell 'root' directory must be created via the following"
-    echo "command:"
-    echo "    mkarchroot \$CHROOT_SHELL/root base base-devel sudo"
-    echo ""
-    echo "If you have problems passing params to makepkg or need to pass long"
-    echo "options, put -- between the makechrootpkg args and the makepkg args"
-    echo ""
-    echo "Default makepkg args: $MAKEPKG_ARGS"
-    exit 1
-}
-
-while getopts ':r:h:c' arg; do
-    case "${arg}" in
-        r) chrootdir="$OPTARG" ;;
-        c) clean_first=1 ;;
-        h|?) usage ;;
-        *) MAKEPKG_ARGS="$MAKEPKG_ARGS -$arg $OPTARG" ;;
-    esac
-done
-
-#Get rid of trailing / in chrootdir
-[ "$chrootdir" != "/" ] && chrootdir=$(echo $chrootdir | sed 's#/$##')
-
-# Pass all arguments after -- right to makepkg
-MAKEPKG_ARGS="$MAKEPKG_ARGS ${*:$OPTIND}"
-
-# See if -R was passed to makepkg
-for arg in ${*:$OPTIND}; do
-    if [ "$arg" = "-R" ]; then
-        REPACK=1
-        break;
-    fi
-done
-
-if [ "$EUID" != "0" ]; then
-    echo "This script must be run as root."
-    exit 1
-fi
-
-if [ ! -f PKGBUILD ]; then
-    echo "This must be run in a directory containing a PKGBUILD."
-    exit 1
-fi
-source PKGBUILD
-
-if [ ! -d "$chrootdir" ]; then
-    echo "No \$CHROOT_SHELL defined, or invalid path ($chrootdir)"
-    exit 1
-fi
-
-if [ ! -d "$chrootdir/root" ]; then
-    echo "Missing \$CHROOT_SHELL root directory."
-    echo "Try using: mkarchroot \$CHROOT_SHELL base base-devel sudo"
-    usage
-fi
-
-[ -d "$chrootdir/rw" -a "$clean_first" -eq "1" ] && rm -rf "$chrootdir/rw/" 
-[ -d "$chrootdir/rw" ] || mkdir "$chrootdir/rw"
-[ -d "$chrootdir/union" ] || mkdir "$chrootdir/union"
-
-cleanup ()
-{
-    echo "cleaning up unioned mounts"
-    umount "$chrootdir/union/pkgdest" 2>/dev/null
-    umount "$chrootdir/union/srcdest" 2>/dev/null
-    umount "$chrootdir/union"
-}
-
-uniondir="$chrootdir/union"
-echo "building union chroot"
-grep -Fq unionfs /proc/filesystems
-if [ $? -ne 0 ]; then
-    modprobe -q unionfs
-    if [ $? -ne 0 ]; then
-        echo "ERROR: No unionfs available. Abandon ship!" && exit 1
-    fi
-fi
-mount -t unionfs none -o "dirs=$chrootdir/rw=rw:$chrootdir/root=ro" "$uniondir"
-trap 'cleanup' 0 1 2 15
-
-echo "moving build files to chroot"
-[ -d "$uniondir/build" ] || mkdir "$uniondir/build"
-
-if [ "$REPACK" != "1" ]; then
-    #Remove anything in there UNLESS -R (repack) was passed to makepkg
-    rm -rf "$uniondir/build/"*
-fi
-
-# Copy makepkg.conf and ~/.makepkg.conf into the chroot so packager has
-# all their custom variables set.
-if [ -r "/etc/makepkg.conf" ]; then
-  rm $uniondir/etc/makepkg.conf
-  cp /etc/makepkg.conf $uniondir/etc/makepkg.conf
-fi
-if [ -r ~/.makepkg.conf ]; then
-  cat ~/.makepkg.conf >> $uniondir/etc/makepkg.conf
-fi
-
-source $uniondir/etc/makepkg.conf
-
-# Magic trickery with PKGDEST and SRCDEST, so that the built
-# files end up where they're expected in the _real_ filesystem
-[ -d "$uniondir/srcdest" ] || mkdir "$uniondir/srcdest"
-[ -d "$uniondir/pkgdest" ] || mkdir "$uniondir/pkgdest"
-[ ! -z "$PKGDEST" ] && mount --bind "$PKGDEST" "$uniondir/pkgdest"
-[ ! -z "$SRCDEST" ] && mount --bind "$SRCDEST" "$uniondir/srcdest"
-
-if ! grep "PKGDEST=/pkgdest" "$uniondir/etc/makepkg.conf" >/dev/null 2>&1; then
-    echo "Setting PKGDEST in makepkg.conf"
-    echo "PKGDEST=/pkgdest" >> "$uniondir/etc/makepkg.conf"
-fi
-
-if ! grep "SRCDEST=/srcdest" "$uniondir/etc/makepkg.conf" >/dev/null 2>&1; then
-    echo "Setting SRCDEST in makepkg.conf"
-    echo "SRCDEST=/srcdest" >> "$uniondir/etc/makepkg.conf"
-fi
-
-chown -R nobody "$uniondir/build"
-chown -R nobody "$uniondir/srcdest"
-chown -R nobody "$uniondir/pkgdest"
-
-# Copy PKGBUILD and sources
-source PKGBUILD
-cp PKGBUILD "$uniondir/build/"
-for f in ${source[@]}; do
-    basef=$(basename $f)
-    if [ -f "$basef" ]; then
-        cp "$basef" "$uniondir/srcdest/"
-    fi
-done
-if [ "$install" != "" -a -f "$install" ]; then
-    cp "$install" "$uniondir/build/"
-fi
-
-if ! grep "^nobody" "$uniondir/etc/sudoers" >/dev/null 2>&1; then
-    echo "allowing 'nobody' sudo rights in the chroot"
-    echo "nobody	ALL=(ALL) NOPASSWD: ALL" >> "$uniondir/etc/sudoers"
-    chmod 440 "$uniondir/etc/sudoers"
-fi
-
-#This is a little gross, but this way the script is recreated every time in the
-#rw portion of the union
-(cat <<EOF
-#!/bin/bash
-export LANG=$LOCALE
-cd /build
-sudo -u nobody makepkg $MAKEPKG_ARGS || touch BUILD_FAILED
-EOF
-) > "$uniondir/chrootbuild"
-chmod +x "$uniondir/chrootbuild"
-
-mkarchroot -r "/chrootbuild" "$uniondir"
-
-if [ -e ${chrootdir}/rw/build/BUILD_FAILED ]; then
-    echo "Build failed, check \$CHROOT_DIR/rw/build"
-    rm ${chrootdir}/rw/build/BUILD_FAILED
-    exit 1
-else	
-    source ${WORKDIR}/PKGBUILD
-    if [ -z "$(mount | grep ${chrootdir}/union/pkgdest)" ]; then
-        echo "Moving completed package file to ${WORKDIR}"
-        mv ${chrootdir}/union/pkgdest/${pkgname}-${pkgver}-${pkgrel}-*.pkg.tar.gz ${WORKDIR}
-    fi
-    if [ -z "$(mount | grep ${chrootdir}/union/srcdest)" ]; then
-        echo "Moving downloaded source files to ${WORKDIR}"
-        mv ${chrootdir}/union/srcdest/* ${WORKDIR}
-    fi
-    rm -rf ${chrootdir}/rw/build/*
-    echo "Build complete"
-fi
-
-# vim:ft=sh:ts=4:sw=4:et:

makechrootpkg.in

@@ -0,0 +1,437 @@
+#!/bin/bash
+# License: GNU GPLv2
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+m4_include(lib/common.sh)
+m4_include(lib/archroot.sh)
+
+shopt -s nullglob
+
+init_variables() {
+	default_makepkg_args=(--syncdeps --noconfirm --log --holdver --skipinteg)
+	makepkg_args=("${default_makepkg_args[@]}")
+	keepbuilddir=false
+	update_first=false
+	clean_first=false
+	run_namcap=false
+	temp_chroot=false
+	chrootdir=
+	passeddir=
+	makepkg_user=
+	declare -ga install_pkgs
+	declare -gi ret=0
+
+	bindmounts_ro=()
+	bindmounts_rw=()
+
+	copy=$USER
+	[[ -n ${SUDO_USER:-} ]] && copy=$SUDO_USER
+	[[ -z "$copy" || $copy = root ]] && copy=copy
+	src_owner=${SUDO_USER:-$USER}
+}
+
+usage() {
+	echo "Usage: ${0##*/} [options] -r <chrootdir> [--] [makepkg args]"
+	echo ' Run this script in a PKGBUILD dir to build a package inside a'
+	echo ' clean chroot. Arguments passed to this script after the'
+	echo ' end-of-options marker (--) will be passed to makepkg.'
+	echo ''
+	echo ' The chroot dir consists of the following directories:'
+	echo ' <chrootdir>/{root, copy} but only "root" is required'
+	echo ' by default. The working copy will be created as needed'
+	echo ''
+	echo 'The chroot "root" directory must be created via the following'
+	echo 'command:'
+	echo '    mkarchroot <chrootdir>/root base-devel'
+	echo ''
+	echo 'This script reads {SRC,SRCPKG,PKG,LOG}DEST, MAKEFLAGS and PACKAGER'
+	echo 'from makepkg.conf(5), if those variables are not part of the'
+	echo 'environment.'
+	echo ''
+	echo "Default makepkg args: ${default_makepkg_args[*]}"
+	echo ''
+	echo 'Flags:'
+	echo '-h         This help'
+	echo '-c         Clean the chroot before building'
+	echo '-d <dir>   Bind directory into build chroot as read-write'
+	echo '-D <dir>   Bind directory into build chroot as read-only'
+	echo '-u         Update the working copy of the chroot before building'
+	echo '           This is useful for rebuilds without dirtying the pristine'
+	echo '           chroot'
+	echo '-r <dir>   The chroot dir to use'
+	echo '-I <pkg>   Install a package into the working copy of the chroot'
+	echo '-l <copy>  The directory to use as the working copy of the chroot'
+	echo '           Useful for maintaining multiple copies'
+	echo "           Default: $copy"
+	echo '-n         Run namcap on the package'
+	echo '-T         Build in a temporary directory'
+	echo '-U         Run makepkg as a specified user'
+	exit 1
+}
+
+# {{{ functions
+# Usage: load_vars $makepkg_conf
+# Globals:
+#  - SRCDEST
+#  - SRCPKGDEST
+#  - PKGDEST
+#  - LOGDEST
+#  - MAKEFLAGS
+#  - PACKAGER
+load_vars() {
+	local makepkg_conf="$1" var
+
+	[[ -f $makepkg_conf ]] || return 1
+
+	for var in {SRC,SRCPKG,PKG,LOG}DEST MAKEFLAGS PACKAGER; do
+		[[ -z ${!var:-} ]] && eval "$(grep "^${var}=" "$makepkg_conf")"
+	done
+
+	return 0
+}
+
+# Usage: sync_chroot $rootdir $copydir [$copy]
+sync_chroot() {
+	local rootdir=$1
+	local copydir=$2
+	local copy=${3:-$2}
+
+	if [[ "$rootdir" -ef "$copydir" ]]; then
+		error 'Cannot sync copy with itself: %s' "$copydir"
+		return 1
+	fi
+
+	# Get a read lock on the root chroot to make
+	# sure we don't clone a half-updated chroot
+	slock 8 "$rootdir.lock" \
+		"Locking clean chroot [%s]" "$rootdir"
+
+	stat_busy "Synchronizing chroot copy [%s] -> [%s]" "$rootdir" "$copy"
+	if is_subvolume "$rootdir" && is_same_fs "$rootdir" "$(dirname -- "$copydir")" && ! mountpoint -q "$copydir"; then
+		if is_subvolume "$copydir"; then
+			subvolume_delete_recursive "$copydir" ||
+				die "Unable to delete subvolume %s" "$copydir"
+		else
+			# avoid change of filesystem in case of an umount failure
+			rm --recursive --force --one-file-system "$copydir" ||
+				die "Unable to delete %s" "$copydir"
+		fi
+		btrfs subvolume snapshot "$rootdir" "$copydir" >/dev/null ||
+			die "Unable to create subvolume %s" "$copydir"
+	else
+		mkdir -p "$copydir"
+		rsync -a --delete -q -W -x "$rootdir/" "$copydir"
+	fi
+	stat_done
+
+	# Drop the read lock again
+	lock_close 8
+
+	# Update mtime
+	touch "$copydir"
+}
+
+# Usage: delete_chroot $copydir [$copy]
+delete_chroot() {
+	local copydir=$1
+	local copy=${1:-$2}
+
+	stat_busy "Removing chroot copy [%s]" "$copy"
+	if is_subvolume "$copydir" && ! mountpoint -q "$copydir"; then
+		subvolume_delete_recursive "$copydir" ||
+			die "Unable to delete subvolume %s" "$copydir"
+	else
+		# avoid change of filesystem in case of an umount failure
+		rm --recursive --force --one-file-system "$copydir" ||
+			die "Unable to delete %s" "$copydir"
+	fi
+
+	# remove lock file
+	rm -f "$copydir.lock"
+	stat_done
+}
+
+# Usage: install_packages $copydir $pkgs...
+install_packages() {
+	local copydir=$1
+	local install_pkgs=("${@:2}")
+
+	local -a pkgnames
+	local ret
+
+	pkgnames=("${install_pkgs[@]##*/}")
+
+	cp -- "${install_pkgs[@]}" "$copydir/root/"
+	arch-nspawn "$copydir" "${bindmounts_ro[@]}" "${bindmounts_rw[@]}" \
+		pacman -U --noconfirm -- "${pkgnames[@]/#//root/}"
+	ret=$?
+	rm -- "${pkgnames[@]/#/$copydir/root/}"
+
+	return $ret
+}
+
+# Usage: prepare_chroot $copydir $HOME $keepbuilddir $run_namcap
+# Globals:
+#  - MAKEFLAGS
+#  - PACKAGER
+prepare_chroot() {
+	local copydir=$1
+	local USER_HOME=$2
+	local keepbuilddir=$3
+	local run_namcap=$4
+
+	$keepbuilddir || rm -rf "$copydir/build"
+
+	local builduser_uid builduser_gid
+	builduser_uid="${SUDO_UID:-$UID}"
+	builduser_gid="$(id -g "$builduser_uid")"
+	local install="install -o $builduser_uid -g $builduser_gid"
+	local x
+
+	# We can't use useradd without chrooting, otherwise it invokes PAM modules
+	# which we might not be able to load (i.e. when building i686 packages on
+	# an x86_64 host).
+	sed -e '/^builduser:/d' -i "$copydir"/etc/{passwd,group}
+	printf >>"$copydir/etc/group"  'builduser:x:%d:\n' "$builduser_gid"
+	printf >>"$copydir/etc/passwd" 'builduser:x:%d:%d:builduser:/build:/bin/bash\n' "$builduser_uid" "$builduser_gid"
+
+	$install -d "$copydir"/{build,build/.gnupg,startdir,{pkg,srcpkg,src,log}dest}
+
+	for x in .gnupg/pubring.{kbx,gpg}; do
+		[[ -r $USER_HOME/$x ]] || continue
+		$install -m 644 "$USER_HOME/$x" "$copydir/build/$x"
+	done
+
+	sed -e '/^MAKEFLAGS=/d' -e '/^PACKAGER=/d' -i "$copydir/etc/makepkg.conf"
+	for x in BUILDDIR=/build PKGDEST=/pkgdest SRCPKGDEST=/srcpkgdest SRCDEST=/srcdest LOGDEST=/logdest \
+		"MAKEFLAGS='${MAKEFLAGS:-}'" "PACKAGER='${PACKAGER:-}'"
+	do
+		grep -q "^$x" "$copydir/etc/makepkg.conf" && continue
+		echo "$x" >>"$copydir/etc/makepkg.conf"
+	done
+
+	cat > "$copydir/etc/sudoers.d/builduser-pacman" <<EOF
+builduser ALL = NOPASSWD: /usr/bin/pacman
+EOF
+	chmod 440 "$copydir/etc/sudoers.d/builduser-pacman"
+
+	# This is a little gross, but this way the script is recreated every time in the
+	# working copy
+	{
+		printf '#!/bin/bash\n'
+		declare -f _chrootbuild
+		printf '_chrootbuild "$@" || exit\n'
+
+		if $run_namcap; then
+			declare -f _chrootnamcap
+			printf '_chrootnamcap || exit\n'
+		fi
+	} >"$copydir/chrootbuild"
+	chmod +x "$copydir/chrootbuild"
+}
+
+# These functions aren't run in makechrootpkg,
+# so no global variables
+_chrootbuild() {
+	# shellcheck source=/dev/null
+	. /etc/profile
+	# Beware, there are some stupid arbitrary rules on how you can
+	# use "$" in arguments to commands with "sudo -i".  ${foo} or
+	# ${1} is OK, but $foo or $1 isn't.
+	# https://bugzilla.sudo.ws/show_bug.cgi?id=765
+	sudo -iu builduser bash -c 'cd /startdir; makepkg "$@"' -bash "$@"
+}
+
+_chrootnamcap() {
+	pacman -S --needed --noconfirm namcap
+	for pkgfile in /startdir/PKGBUILD /pkgdest/*; do
+		echo "Checking ${pkgfile##*/}"
+		sudo -u builduser namcap "$pkgfile" 2>&1 | tee "/logdest/${pkgfile##*/}-namcap.log"
+	done
+}
+
+# Usage: download_sources $copydir $makepkg_user
+# Globals:
+#  - SRCDEST
+#  - USER
+download_sources() {
+	local copydir=$1
+	local makepkg_user=$2
+
+	local builddir
+	builddir="$(mktemp -d)"
+	chmod 1777 "$builddir"
+
+	# Ensure sources are downloaded
+	sudo -u "$makepkg_user" env SRCDEST="$SRCDEST" BUILDDIR="$builddir" \
+		makepkg --config="$copydir/etc/makepkg.conf" --verifysource -o ||
+		die "Could not download sources."
+
+	# Clean up garbage from verifysource
+	rm -rf "$builddir"
+}
+
+# Usage: move_products $copydir $owner
+# Globals:
+#  - PKGDEST
+#  - LOGDEST
+move_products() {
+	local copydir=$1
+	local src_owner=$2
+
+	local pkgfile
+	for pkgfile in "$copydir"/pkgdest/*; do
+		chown "$src_owner" "$pkgfile"
+		mv "$pkgfile" "$PKGDEST"
+
+		# Fix broken symlink because of temporary chroot PKGDEST /pkgdest
+		if [[ "$PWD" != "$PKGDEST" && -L "$PWD/${pkgfile##*/}" ]]; then
+			ln -sf "$PKGDEST/${pkgfile##*/}"
+		fi
+	done
+
+	local l
+	for l in "$copydir"/logdest/*; do
+		[[ $l == */logpipe.* ]] && continue
+		chown "$src_owner" "$l"
+		mv "$l" "$LOGDEST"
+	done
+
+	for s in "$copydir"/srcpkgdest/*; do
+		chown "$src_owner" "$s"
+		mv "$s" "$SRCPKGDEST"
+
+		# Fix broken symlink because of temporary chroot SRCPKGDEST /srcpkgdest
+		if [[ "$PWD" != "$SRCPKGDEST" && -L "$PWD/${s##*/}" ]]; then
+			ln -sf "$SRCPKGDEST/${s##*/}"
+		fi
+	done
+}
+# }}}
+
+main() {
+	init_variables
+
+	while getopts 'hcur:I:l:nTD:d:U:' arg; do
+		case "$arg" in
+			c) clean_first=true ;;
+			D) bindmounts_ro+=("--bind-ro=$OPTARG") ;;
+			d) bindmounts_rw+=("--bind=$OPTARG") ;;
+			u) update_first=true ;;
+			r) passeddir="$OPTARG" ;;
+			I) install_pkgs+=("$OPTARG") ;;
+			l) copy="$OPTARG" ;;
+			n) run_namcap=true; makepkg_args+=(--install) ;;
+			T) temp_chroot=true; copy+="-$$" ;;
+			U) makepkg_user="$OPTARG" ;;
+			h|*) usage ;;
+		esac
+	done
+
+	[[ ! -f PKGBUILD && -z "${install_pkgs[*]}" ]] && die 'This must be run in a directory containing a PKGBUILD.'
+	[[ -n $makepkg_user && -z $(id -u "$makepkg_user") ]] && die 'Invalid makepkg user.'
+	makepkg_user=${makepkg_user:-${SUDO_USER:-$USER}}
+
+	check_root
+
+	# Canonicalize chrootdir, getting rid of trailing /
+	chrootdir=$(readlink -e "$passeddir")
+	[[ ! -d $chrootdir ]] && die "No chroot dir defined, or invalid path '%s'" "$passeddir"
+	[[ ! -d $chrootdir/root ]] && die "Missing chroot dir root directory. Try using: mkarchroot %s/root base-devel" "$chrootdir"
+
+	if [[ ${copy:0:1} = / ]]; then
+		copydir=$copy
+	else
+		copydir="$chrootdir/$copy"
+	fi
+
+	# Pass all arguments after -- right to makepkg
+	makepkg_args+=("${@:$OPTIND}")
+
+	# See if -R or -e was passed to makepkg
+	for arg in "${makepkg_args[@]}"; do
+		case ${arg%%=*} in
+			--repackage|--noextract) keepbuilddir=true; break ;;
+			--repackage|--noextract) keepbuilddir=true; break ;;
+			--*) ;;
+			-*R*|-*e*) keepbuilddir=true; break ;;
+		esac
+	done
+
+	if [[ -n $SUDO_USER ]]; then
+		eval "USER_HOME=~$SUDO_USER"
+	else
+		USER_HOME=$HOME
+	fi
+
+	umask 0022
+
+	load_vars "${XDG_CONFIG_HOME:-$USER_HOME/.config}/pacman/makepkg.conf" || load_vars "$USER_HOME/.makepkg.conf"
+	load_vars /etc/makepkg.conf
+
+	# Use PKGBUILD directory if these don't exist
+	[[ -d $PKGDEST ]]    || PKGDEST=$PWD
+	[[ -d $SRCDEST ]]    || SRCDEST=$PWD
+	[[ -d $SRCPKGDEST ]] || SRCPKGDEST=$PWD
+	[[ -d $LOGDEST ]]    || LOGDEST=$PWD
+
+	# Lock the chroot we want to use. We'll keep this lock until we exit.
+	lock 9 "$copydir.lock" "Locking chroot copy [%s]" "$copy"
+
+	if [[ ! -d $copydir ]] || $clean_first; then
+		sync_chroot "$chrootdir/root" "$copydir" "$copy"
+	fi
+
+	$update_first && arch-nspawn "$copydir" \
+			"${bindmounts_ro[@]}" "${bindmounts_rw[@]}" \
+			pacman -Syu --noconfirm
+
+	if [[ -n ${install_pkgs[*]:-} ]]; then
+		install_packages "$copydir" "${install_pkgs[@]}"
+		ret=$?
+		# If there is no PKGBUILD we have done
+		[[ -f PKGBUILD ]] || return $ret
+	fi
+
+	if [[ "$(id -u "$makepkg_user")" == 0 ]]; then
+		error "Running makepkg as root is not allowed."
+		exit 1
+	fi
+
+	download_sources "$copydir" "$makepkg_user"
+
+	prepare_chroot "$copydir" "$USER_HOME" "$keepbuilddir"
+
+	if arch-nspawn "$copydir" \
+		--bind="$PWD:/startdir" \
+		--bind="$SRCDEST:/srcdest" \
+		"${bindmounts_ro[@]}" "${bindmounts_rw[@]}" \
+		/chrootbuild "${makepkg_args[@]}"
+	then
+		move_products "$copydir" "$src_owner"
+	else
+		(( ret += 1 ))
+	fi
+
+	$temp_chroot && delete_chroot "$copydir" "$copy"
+
+	if (( ret != 0 )); then
+		if $temp_chroot; then
+			die "Build failed"
+		else
+			die "Build failed, check %s/build" "$copydir"
+		fi
+	else
+		true
+	fi
+}
+
+main "$@"

makepkg-i686.conf

@@ -0,0 +1,150 @@
+#!/hint/bash
+# shellcheck disable=2034
+
+#
+# /etc/makepkg.conf
+#
+
+#########################################################################
+# SOURCE ACQUISITION
+#########################################################################
+#
+#-- The download utilities that makepkg should use to acquire sources
+#  Format: 'protocol::agent'
+DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
+          'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
+          'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
+          'rsync::/usr/bin/rsync --no-motd -z %u %o'
+          'scp::/usr/bin/scp -C %u %o')
+
+# Other common tools:
+# /usr/bin/snarf
+# /usr/bin/lftpget -c
+# /usr/bin/wget
+
+#-- The package required by makepkg to download VCS sources
+#  Format: 'protocol::package'
+VCSCLIENTS=('bzr::bzr'
+            'git::git'
+            'hg::mercurial'
+            'svn::subversion')
+
+#########################################################################
+# ARCHITECTURE, COMPILE FLAGS
+#########################################################################
+#
+CARCH="i686"
+CHOST="i686-pc-linux-gnu"
+
+#-- Compiler and Linker Flags
+# -march (or -mcpu) builds exclusively for an architecture
+# -mtune optimizes for an architecture, but builds for whole processor family
+CPPFLAGS="-D_FORTIFY_SOURCE=2"
+CFLAGS="-march=i686 -mtune=generic -O2 -pipe -fstack-protector-strong -fno-plt"
+CXXFLAGS="-march=i686 -mtune=generic -O2 -pipe -fstack-protector-strong -fno-plt"
+LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now"
+#-- Make Flags: change this for DistCC/SMP systems
+#MAKEFLAGS="-j2"
+#-- Debugging flags
+DEBUG_CFLAGS="-g -fvar-tracking-assignments"
+DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
+
+#########################################################################
+# BUILD ENVIRONMENT
+#########################################################################
+#
+# Defaults: BUILDENV=(!distcc color !ccache check !sign)
+#  A negated environment option will do the opposite of the comments below.
+#
+#-- distcc:   Use the Distributed C/C++/ObjC compiler
+#-- color:    Colorize output messages
+#-- ccache:   Use ccache to cache compilation
+#-- check:    Run the check() function if present in the PKGBUILD
+#-- sign:     Generate PGP signature file
+#
+BUILDENV=(!distcc color !ccache check !sign)
+#
+#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
+#-- specify a space-delimited list of hosts running in the DistCC cluster.
+#DISTCC_HOSTS=""
+#
+#-- Specify a directory for package building.
+#BUILDDIR=/tmp/makepkg
+
+#########################################################################
+# GLOBAL PACKAGE OPTIONS
+#   These are default values for the options=() settings
+#########################################################################
+#
+# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !optipng !upx !debug)
+#  A negated option will do the opposite of the comments below.
+#
+#-- strip:      Strip symbols from binaries/libraries
+#-- docs:       Save doc directories specified by DOC_DIRS
+#-- libtool:    Leave libtool (.la) files in packages
+#-- staticlibs: Leave static library (.a) files in packages
+#-- emptydirs:  Leave empty directories in packages
+#-- zipman:     Compress manual (man and info) pages in MAN_DIRS with gzip
+#-- purge:      Remove files specified by PURGE_TARGETS
+#-- upx:        Compress binary executable files using UPX
+#-- optipng:    Optimize PNG images with optipng
+#-- debug:      Add debugging flags as specified in DEBUG_* variables
+#
+OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !optipng !upx !debug)
+
+#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
+INTEGRITY_CHECK=(md5)
+#-- Options to be used when stripping binaries. See `man strip' for details.
+STRIP_BINARIES="--strip-all"
+#-- Options to be used when stripping shared libraries. See `man strip' for details.
+STRIP_SHARED="--strip-unneeded"
+#-- Options to be used when stripping static libraries. See `man strip' for details.
+STRIP_STATIC="--strip-debug"
+#-- Manual (man and info) directories to compress (if zipman is specified)
+MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
+#-- Doc directories to remove (if !docs is specified)
+DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
+#-- Files to be removed from all packages (if purge is specified)
+PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
+
+#########################################################################
+# PACKAGE OUTPUT
+#########################################################################
+#
+# Default: put built package and cached source in build directory
+#
+#-- Destination: specify a fixed directory where all packages will be placed
+#PKGDEST=/home/packages
+#-- Source cache: specify a fixed directory where source files will be cached
+#SRCDEST=/home/sources
+#-- Source packages: specify a fixed directory where all src packages will be placed
+#SRCPKGDEST=/home/srcpackages
+#-- Log files: specify a fixed directory where all log files will be placed
+#LOGDEST=/home/makepkglogs
+#-- Packager: name/email of the person or organization building packages
+#PACKAGER="John Doe <john@doe.com>"
+#-- Specify a key to use for package signing
+#GPGKEY=""
+
+#########################################################################
+# COMPRESSION DEFAULTS
+#########################################################################
+#
+COMPRESSGZ=(gzip -c -f -n)
+COMPRESSBZ2=(bzip2 -c -f)
+COMPRESSXZ=(xz -c -z -)
+COMPRESSLRZ=(lrzip -q)
+COMPRESSLZO=(lzop -q)
+COMPRESSZ=(compress -c -f)
+
+#########################################################################
+# EXTENSION DEFAULTS
+#########################################################################
+#
+# WARNING: Do NOT modify these variables unless you know what you are
+#          doing.
+#
+PKGEXT='.pkg.tar.xz'
+SRCEXT='.src.tar.gz'
+
+# vim: set ft=sh ts=2 sw=2 et:

makepkg-x86_64.conf

@@ -0,0 +1,150 @@
+#!/hint/bash
+# shellcheck disable=2034
+
+#
+# /etc/makepkg.conf
+#
+
+#########################################################################
+# SOURCE ACQUISITION
+#########################################################################
+#
+#-- The download utilities that makepkg should use to acquire sources
+#  Format: 'protocol::agent'
+DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
+          'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
+          'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
+          'rsync::/usr/bin/rsync --no-motd -z %u %o'
+          'scp::/usr/bin/scp -C %u %o')
+
+# Other common tools:
+# /usr/bin/snarf
+# /usr/bin/lftpget -c
+# /usr/bin/wget
+
+#-- The package required by makepkg to download VCS sources
+#  Format: 'protocol::package'
+VCSCLIENTS=('bzr::bzr'
+            'git::git'
+            'hg::mercurial'
+            'svn::subversion')
+
+#########################################################################
+# ARCHITECTURE, COMPILE FLAGS
+#########################################################################
+#
+CARCH="x86_64"
+CHOST="x86_64-pc-linux-gnu"
+
+#-- Compiler and Linker Flags
+# -march (or -mcpu) builds exclusively for an architecture
+# -mtune optimizes for an architecture, but builds for whole processor family
+CPPFLAGS="-D_FORTIFY_SOURCE=2"
+CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong -fno-plt"
+CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong -fno-plt"
+LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now"
+#-- Make Flags: change this for DistCC/SMP systems
+#MAKEFLAGS="-j2"
+#-- Debugging flags
+DEBUG_CFLAGS="-g -fvar-tracking-assignments"
+DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
+
+#########################################################################
+# BUILD ENVIRONMENT
+#########################################################################
+#
+# Defaults: BUILDENV=(!distcc color !ccache check !sign)
+#  A negated environment option will do the opposite of the comments below.
+#
+#-- distcc:   Use the Distributed C/C++/ObjC compiler
+#-- color:    Colorize output messages
+#-- ccache:   Use ccache to cache compilation
+#-- check:    Run the check() function if present in the PKGBUILD
+#-- sign:     Generate PGP signature file
+#
+BUILDENV=(!distcc color !ccache check !sign)
+#
+#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
+#-- specify a space-delimited list of hosts running in the DistCC cluster.
+#DISTCC_HOSTS=""
+#
+#-- Specify a directory for package building.
+#BUILDDIR=/tmp/makepkg
+
+#########################################################################
+# GLOBAL PACKAGE OPTIONS
+#   These are default values for the options=() settings
+#########################################################################
+#
+# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !optipng !upx !debug)
+#  A negated option will do the opposite of the comments below.
+#
+#-- strip:      Strip symbols from binaries/libraries
+#-- docs:       Save doc directories specified by DOC_DIRS
+#-- libtool:    Leave libtool (.la) files in packages
+#-- staticlibs: Leave static library (.a) files in packages
+#-- emptydirs:  Leave empty directories in packages
+#-- zipman:     Compress manual (man and info) pages in MAN_DIRS with gzip
+#-- purge:      Remove files specified by PURGE_TARGETS
+#-- upx:        Compress binary executable files using UPX
+#-- optipng:    Optimize PNG images with optipng
+#-- debug:      Add debugging flags as specified in DEBUG_* variables
+#
+OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !optipng !upx !debug)
+
+#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
+INTEGRITY_CHECK=(md5)
+#-- Options to be used when stripping binaries. See `man strip' for details.
+STRIP_BINARIES="--strip-all"
+#-- Options to be used when stripping shared libraries. See `man strip' for details.
+STRIP_SHARED="--strip-unneeded"
+#-- Options to be used when stripping static libraries. See `man strip' for details.
+STRIP_STATIC="--strip-debug"
+#-- Manual (man and info) directories to compress (if zipman is specified)
+MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
+#-- Doc directories to remove (if !docs is specified)
+DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
+#-- Files to be removed from all packages (if purge is specified)
+PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
+
+#########################################################################
+# PACKAGE OUTPUT
+#########################################################################
+#
+# Default: put built package and cached source in build directory
+#
+#-- Destination: specify a fixed directory where all packages will be placed
+#PKGDEST=/home/packages
+#-- Source cache: specify a fixed directory where source files will be cached
+#SRCDEST=/home/sources
+#-- Source packages: specify a fixed directory where all src packages will be placed
+#SRCPKGDEST=/home/srcpackages
+#-- Log files: specify a fixed directory where all log files will be placed
+#LOGDEST=/home/makepkglogs
+#-- Packager: name/email of the person or organization building packages
+#PACKAGER="John Doe <john@doe.com>"
+#-- Specify a key to use for package signing
+#GPGKEY=""
+
+#########################################################################
+# COMPRESSION DEFAULTS
+#########################################################################
+#
+COMPRESSGZ=(gzip -c -f -n)
+COMPRESSBZ2=(bzip2 -c -f)
+COMPRESSXZ=(xz -c -z -)
+COMPRESSLRZ=(lrzip -q)
+COMPRESSLZO=(lzop -q)
+COMPRESSZ=(compress -c -f)
+
+#########################################################################
+# EXTENSION DEFAULTS
+#########################################################################
+#
+# WARNING: Do NOT modify these variables unless you know what you are
+#          doing.
+#
+PKGEXT='.pkg.tar.xz'
+SRCEXT='.src.tar.gz'
+
+# vim: set ft=sh ts=2 sw=2 et:

mkarchroot

@@ -1,184 +0,0 @@
-#!/bin/bash
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-FORCE="n"
-RUN=""
-
-working_dir=""
-
-APPNAME=$(basename "${0}")
-
-# usage: usage <exitvalue>
-usage ()
-{
-    echo "usage ${APPNAME} [options] working-dir [package-list | app]"
-    echo " options:"
-    echo "    -r <app>      Run 'app' within the context of the chroot"
-    echo "    -u            Update the chroot via pacman"
-    echo "    -f            Force overwrite of files in the working-dir"
-    echo "    -C <file>     location of a pacman config file"
-    echo "    -M <file>     location of a makepkg config file"
-    echo "    -h            This message"
-    exit $1
-}
-
-while getopts 'r:ufhC:M:' arg; do
-    case "${arg}" in
-        r) RUN="$OPTARG" ;;
-        u) RUN="pacman -Syu" ;;
-        f) FORCE="y" ;;
-        C) pac_conf="$OPTARG" ;;
-        M) makepkg_conf="$OPTARG" ;;
-        h|?) usage 0 ;;
-        *) echo "invalid argument '${arg}'"; usage 1 ;;
-    esac
-done
-
-if [ "$EUID" != "0" ]; then
-    echo "error: this script must be run as root."
-    exit 1
-fi
-
-shift $(($OPTIND - 1))
-
-if [ "$RUN" = "" -a $# -lt 2 ]; then
-    echo "you must specify a directory and one or more packages"
-    usage 1
-elif [ $# -lt 1 ]; then
-    echo "you must specify a directory"
-    usage 1
-fi
-
-working_dir="$(readlink -f ${1})"
-shift 1
-
-[ "${working_dir}" = "" ] && echo "error: please specify a working directory" && usage 1
-
-# {{{ functions 
-
-chroot_mount ()
-{
-    echo "mounting sysfs : /sys"
-    [ -e "${working_dir}/sys" ] || mkdir "${working_dir}/sys"
-    mount -t sysfs sysfs "${working_dir}/sys"
-
-    echo "mounting procfs : /proc"
-    [ -e "${working_dir}/proc" ] || mkdir "${working_dir}/proc"
-    mount -t proc proc "${working_dir}/proc"
-
-    echo "binding device nodes : /dev"
-    [ -e "${working_dir}/dev" ] || mkdir "${working_dir}/dev"
-    mount -o bind /dev "${working_dir}/dev"
-
-    echo "binding pacman cache : /var/cache/pacman"
-    [ -e "${working_dir}/var/cache/pacman" ] || mkdir -p "${working_dir}/var/cache/pacman"
-    mount -o bind /var/cache/pacman "${working_dir}/var/cache/pacman"
-
-    trap 'chroot_umount' 0 1 2 15
-}
-
-copy_hostconf ()
-{
-    echo "copying mtab : /etc/mtab"
-    cp /etc/mtab "${working_dir}/etc/mtab"
-
-    echo "copying resolv.conf : /etc/resolv.conf"
-    cp /etc/resolv.conf "${working_dir}/etc/resolv.conf"
-
-}
-
-chroot_umount ()
-{
-    echo "cleaning up mounts"
-    umount "${working_dir}/proc"
-    umount "${working_dir}/sys"
-    umount "${working_dir}/dev"
-    umount "${working_dir}/var/cache/pacman"
-}
-# }}}
-
-if [ "$RUN" != "" ]; then
-    # run chroot {{{
-    #Sanity check
-    if [ ! -f "${working_dir}/.arch-chroot" ]; then
-        echo "error: '${working_dir}' does not appear to be a Arch chroot"
-        echo "  please build the image using mkarchroot"
-        exit 1
-    fi
-
-    chroot_mount
-    copy_hostconf
-
-    echo "starting chroot ($RUN)"
-    chroot "${working_dir}" ${RUN}
-
-    # }}}
-else
-    # {{{ build chroot
-    if [ -e "${working_dir}" -a "${FORCE}" = "n" ]; then
-        echo "error: working dir '${working_dir}' already exists - try using -f"
-        exit 1
-    fi
-
-    mkdir -p "${working_dir}/var/lib/pacman/"
-    mkdir -p "${working_dir}/etc/"
-
-    chroot_mount
-
-    pacargs="--noconfirm -v " #--noprogressbar -v
-    pacargs="$pacargs --root=${working_dir}"
-    # pacman takes these as relative to the given root
-    pacargs="$pacargs --cachedir=/var/cache/pacman/pkg"
-    if [ "$pac_conf" != "" ]; then
-        pacargs="$pacargs --config=${pac_conf}"
-    fi
-
-    if [ $# -eq 0 ]; then
-        echo "no packages to install"
-    else
-        echo "installing packages:"
-        for i in $@; do echo -e "\t$i"; done
-
-        op="-Sy"
-        if [ "$FORCE" = "y" ]; then
-            op="${op}f"
-        fi
-        if ! pacman ${op} ${pacargs} $@; then
-            echo "error: failed to install all packages"
-            exit 1
-        fi
-    fi
-
-    if [ -d "${working_dir}/lib/modules" ]; then
-        echo "running ldconfig"
-        ldconfig -r "${working_dir}"
-    fi
-
-    if [ "$pac_conf" != "" ]; then
-        echo "installing custom pacman.conf"
-        cp ${pac_conf} ${working_dir}/etc/pacman.conf
-    fi
-
-    if [ "$makepkg_conf" != "" ]; then
-        echo "installing custom makepkg.conf"
-        cp ${makepkg_conf} ${working_dir}/etc/makepkg.conf
-    fi
-
-    echo "generating default locales"
-    cp /etc/locale.gen "${working_dir}/etc/locale.gen"
-    chroot "${working_dir}" locale-gen
-
-    if [ ! -e "${working_dir}/.arch-chroot" ]; then
-        date +%s > "${working_dir}/.arch-chroot"
-    fi
-    # }}}
-fi
-
-# vim:ft=sh:ts=4:sw=4:et:

mkarchroot.in

@@ -0,0 +1,100 @@
+#!/bin/bash
+# License: GNU GPLv2
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; version 2 of the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+m4_include(lib/common.sh)
+m4_include(lib/archroot.sh)
+
+working_dir=''
+
+files=()
+
+usage() {
+	echo "Usage: ${0##*/} [options] working-dir package-list..."
+	echo ' options:'
+	echo '    -C <file>     Location of a pacman config file'
+	echo '    -M <file>     Location of a makepkg config file'
+	echo '    -c <dir>      Set pacman cache'
+	echo '    -f <file>     Copy file from the host to the chroot'
+	echo '    -s            Do not run setarch'
+	echo '    -h            This message'
+	exit 1
+}
+
+while getopts 'hC:M:c:f:s' arg; do
+	case "$arg" in
+		C) pac_conf="$OPTARG" ;;
+		M) makepkg_conf="$OPTARG" ;;
+		c) cache_dir="$OPTARG" ;;
+		f) files+=("$OPTARG") ;;
+		s) nosetarch=1 ;;
+		h|?) usage ;;
+		*) error "invalid argument '%s'" "$arg"; usage ;;
+	esac
+done
+shift $((OPTIND - 1))
+
+(( $# < 2 )) && die 'You must specify a directory and one or more packages.'
+
+check_root
+
+working_dir="$(readlink -f "$1")"
+shift 1
+
+[[ -z $working_dir ]] && die 'Please specify a working directory.'
+
+if [[ -z $cache_dir ]]; then
+	cache_dirs=($(pacman -v "$cache_conf" 2>&1 | grep '^Cache Dirs:' | sed 's/Cache Dirs:\s*//g'))
+else
+	cache_dirs=(${cache_dir})
+fi
+
+umask 0022
+
+[[ -e $working_dir ]] && die "Working directory '%s' already exists" "$working_dir"
+
+mkdir -p "$working_dir"
+
+lock 9 "${working_dir}.lock" "Locking chroot"
+
+if is_btrfs "$working_dir"; then
+	rmdir "$working_dir"
+	if ! btrfs subvolume create "$working_dir"; then
+		die "Couldn't create subvolume for '%s'" "$working_dir"
+	fi
+	chmod 0755 "$working_dir"
+fi
+
+for file in "${files[@]}"; do
+	mkdir -p "$(dirname "$working_dir$file")"
+	cp "$file" "$working_dir$file"
+done
+
+_env=()
+while read -r varname; do
+	_env+=("$varname=${!varname}")
+done < <(declare -x | sed -r 's/^declare -x ([^=]*)=.*/\1/' | grep -i '_proxy$')
+env -i "${_env[@]}" \
+pacstrap -GMcd ${pac_conf:+-C "$pac_conf"} "$working_dir" \
+  "${cache_dirs[@]/#/--cachedir=}" "$@" || die 'Failed to install all packages'
+
+printf '%s.UTF-8 UTF-8\n' en_US de_DE > "$working_dir/etc/locale.gen"
+echo 'LANG=en_US.UTF-8' > "$working_dir/etc/locale.conf"
+echo "$CHROOT_VERSION" > "$working_dir/.arch-chroot"
+
+systemd-machine-id-setup --root="$working_dir"
+
+exec arch-nspawn \
+	${nosetarch:+-s} \
+	${pac_conf:+-C "$pac_conf"} \
+	${makepkg_conf:+-M "$makepkg_conf"} \
+	${cache_dir:+-c "$cache_dir"} \
+	"$working_dir" locale-gen

pacman-extra.conf

@@ -0,0 +1,93 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta    = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+#Color
+#TotalDownload
+# We cannot check disk space from within a chroot environment
+#CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+#[testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+#[community-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
+

pacman-gnome-unstable.conf

@@ -0,0 +1,102 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta    = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+#Color
+#TotalDownload
+# We cannot check disk space from within a chroot environment
+#CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+[gnome-unstable]
+Include = /etc/pacman.d/mirrorlist
+
+[staging]
+Include = /etc/pacman.d/mirrorlist
+
+[testing]
+Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+[community-staging]
+Include = /etc/pacman.d/mirrorlist
+
+[community-testing]
+Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
+

pacman-kde-unstable.conf

@@ -0,0 +1,96 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta    = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+#Color
+#TotalDownload
+# We cannot check disk space from within a chroot environment
+#CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+[kde-unstable]
+Include = /etc/pacman.d/mirrorlist
+
+[testing]
+Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+[community-testing]
+Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
+

pacman-multilib-staging.conf

@@ -0,0 +1,110 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta    = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+#Color
+#TotalDownload
+# We cannot check disk space from within a chroot environment
+#CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+[staging]
+Include = /etc/pacman.d/mirrorlist
+
+[testing]
+Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+[community-staging]
+Include = /etc/pacman.d/mirrorlist
+
+[community-testing]
+Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the multilib repositories as required here.
+[multilib-staging]
+Include = /etc/pacman.d/mirrorlist
+
+[multilib-testing]
+Include = /etc/pacman.d/mirrorlist
+
+[multilib]
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
+

pacman-multilib-testing.conf

@@ -0,0 +1,101 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta    = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+#Color
+#TotalDownload
+# We cannot check disk space from within a chroot environment
+#CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+[testing]
+Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+[community-testing]
+Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the multilib repositories as required here.
+[multilib-testing]
+Include = /etc/pacman.d/mirrorlist
+
+[multilib]
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
+

pacman-multilib.conf

@@ -0,0 +1,102 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta    = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+#Color
+#TotalDownload
+# We cannot check disk space from within a chroot environment
+#CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+#[testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+#[community-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the multilib repositories as required here.
+
+#[multilib-testing]
+#Include = /etc/pacman.d/mirrorlist
+
+[multilib]
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
+

pacman-staging.conf

@@ -0,0 +1,99 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta    = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+#Color
+#TotalDownload
+# We cannot check disk space from within a chroot environment
+#CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+[staging]
+Include = /etc/pacman.d/mirrorlist
+
+[testing]
+Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+[community-staging]
+Include = /etc/pacman.d/mirrorlist
+
+[community-testing]
+Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
+

pacman-testing.conf

@@ -0,0 +1,93 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+#HookDir     = /etc/pacman.d/hooks/
+HoldPkg     = pacman glibc
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+#UseDelta    = 0.7
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+#Color
+#TotalDownload
+# We cannot check disk space from within a chroot environment
+#CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+SigLevel    = Required DatabaseOptional
+LocalFileSigLevel = Optional
+#RemoteFileSigLevel = Required
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+[testing]
+Include = /etc/pacman.d/mirrorlist
+
+[core]
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+Include = /etc/pacman.d/mirrorlist
+
+[community-testing]
+Include = /etc/pacman.d/mirrorlist
+
+[community]
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
+

rebuildpkgs.in

@@ -0,0 +1,110 @@
+#!/bin/bash
+# License: Unspecified
+#
+# This script rebuilds a list of packages in order
+# and reports anything that fails
+# 
+# Due to sudo usage, it is recommended to allow makechrootpkg
+# to be run with NOPASSWD in your sudoers file
+#
+# FIXME
+# Currently uses $(pwd)/rebuilds as the directory for rebuilding...
+# TODO make this work for community too
+
+m4_include(lib/common.sh)
+
+if (( $# < 1 )); then
+	printf 'Usage: %s <chrootdir> <packages to rebuild>\n' "$(basename "$0")"
+	printf '  example: %s ~/chroot readline bash foo bar baz\n' "$(basename "$0")"
+	exit 1
+fi
+
+# Source makepkg.conf; fail if it is not found
+if [[ -r '/etc/makepkg.conf' ]]; then
+	# shellcheck source=makepkg-x86_64.conf
+	source '/etc/makepkg.conf'
+else
+	die '/etc/makepkg.conf not found!'
+fi
+
+# Source user-specific makepkg.conf overrides
+if [[ -r "${XDG_CONFIG_HOME:-$HOME/.config}/pacman/makepkg.conf" ]]; then
+	# shellcheck source=/dev/null
+	source "${XDG_CONFIG_HOME:-$HOME/.config}/pacman/makepkg.conf"
+elif [[ -r "$HOME/.makepkg.conf" ]]; then
+	# shellcheck source=/dev/null
+	source "$HOME/.makepkg.conf"
+fi
+
+bump_pkgrel() {
+	# Get the current pkgrel from SVN and update the working copy with it
+	# This prevents us from incrementing out of control :)
+	pbuild='.svn/text-base/PKGBUILD.svn-base'
+	oldrel=$(grep 'pkgrel=' $pbuild | cut -d= -f2)
+
+	#remove decimals
+	rel=${oldrel%%.*}
+
+	newrel=$((rel + 1))
+
+	sed -i "s/pkgrel=$oldrel/pkgrel=$newrel/" PKGBUILD
+}
+
+pkg_from_pkgbuild() {
+	# we want the sourcing to be done in a subshell so we don't pollute our current namespace
+	export CARCH PKGEXT
+	# shellcheck source=PKGBUILD.proto
+	(source PKGBUILD; echo "$pkgname-$pkgver-$pkgrel-$CARCH$PKGEXT")
+}
+
+chrootdir="$1"; shift
+pkgs=("$@")
+
+SVNPATH='svn+ssh://repos.archlinux.org/srv/repos/svn-packages/svn'
+
+msg "Work will be done in %s" "$(pwd)/rebuilds"
+
+REBUILD_ROOT="$(pwd)/rebuilds"
+mkdir -p "$REBUILD_ROOT"
+cd "$REBUILD_ROOT"
+
+/usr/bin/svn co -N $SVNPATH
+
+FAILED=""
+for pkg in "${pkgs[@]}"; do
+	cd "$REBUILD_ROOT/svn-packages"
+
+	msg2 "Building '%s'" "$pkg"
+	/usr/bin/svn update "$pkg"
+	if [[ ! -d "$pkg/trunk" ]]; then
+		FAILED="$FAILED $pkg"
+		warning "%s does not exist in SVN" "$pkg"
+		continue
+	fi
+	cd "$pkg/trunk/"
+
+	bump_pkgrel
+
+	if ! sudo makechrootpkg -u -d -r "$chrootdir" -- --noconfirm; then
+		FAILED="$FAILED $pkg"
+		error "%s Failed!" "$pkg"
+	else
+		pkgfile=$(pkg_from_pkgbuild)
+		if [[ -e $pkgfile ]]; then
+			msg2 "%s Complete" "$pkg"
+		else
+			FAILED="$FAILED $pkg"
+			error "%s Failed, no package built!" "$pkg"
+		fi
+	fi
+done
+
+cd "$REBUILD_ROOT"
+if [[ -n $FAILED ]]; then
+	msg 'Packages failed:'
+	for pkg in $FAILED; do
+		msg2 "%s" "$pkg"
+	done
+fi
+
+msg 'SVN pkgbumps in svn-packages/ - commit when ready'

zsh_completion.in

@@ -0,0 +1,72 @@
+#compdef archbuild archco arch-nspawn archrelease archrm commitpkg finddeps makechrootpkg mkarchroot rebuildpkgs extrapkg=commitpkg corepkg=commitpkg testingpkg=commitpkg stagingpkg=commitpkg communitypkg=commitpkg community-testingpkg=commitpkg community-stagingpkg=commitpkg multilibpkg=commitpkg multilib-testingpkg=commitpkg extra-i686-build=archbuild extra-x86_64-build=archbuild testing-i686-build=archbuild testing-x86_64-build=archbuild staging-i686-build=archbuild staging-x86_64-build=archbuild multilib-build=archbuild multilib-testing-build=archbuild multilib-staging-build=archbuild kde-unstable-i686-build=archbuild kde-unstable-x86_64-build=archbuild gnome-unstable-i686-build=archbuild gnome-unstable-x86_64-build=archbuild communityco=archco
+# License: Unspecified
+
+m4_include(lib/valid-tags.sh)
+
+_archbuild_args=(
+	'-c[Recreate the chroot before building]'
+	'-r[Create chroots in this directory]:base_dir:_files -/'
+)
+
+_archco_args=(
+	'*:packages:_devtools_completions_all_packages'
+)
+
+_arch_nspawn_args=(
+	'-C[Location of a pacman config file]:pacman_config:_files'
+	'-M[Location of a makepkg config file]:makepkg_config:_files'
+	'-c[Set pacman cache]:pacman_cache:_files -/'
+	'-h[Display usage]'
+)
+
+_archrelease_args=(
+	"*:arch:($_tags[*])"
+)
+
+_archrm_args=(
+	'1:path:_files -/'
+)
+
+_commitpkg_args=(
+	"-a[Release to a specific architecture only]:arch:($_arch[*])"
+	'-l[Set bandwidth limit]:limit'
+	'1:commit_msg'
+)
+
+_finddeps_args=(
+	'1:packages:_devtools_completions_all_packages'
+)
+
+_makechrootpkg_args=(
+	'-I[Install a package into the working copy]:target:_files -g "*.pkg.tar.*(.)"'
+	'-c[Clean the chroot before building]'
+	'-h[Display usage]'
+	'-l[The directory to use as the working copy]:copy_dir:_files -/'
+	'-r[The chroot dir to use]:chroot_dir:_files -/'
+	'-u[Update the working copy of the chroot before building]'
+)
+
+_mkarchroot_args=(
+	'-C[Location of a pacman config file]:pacman_config:_files'
+	'-M[Location of a makepkg config file]:makepkg_config:_files'
+	'-c[Set pacman cache]:pacman_cache:_files -/'
+	'-h[Display usage]'
+)
+
+_rebuildpkgs_args=(
+	'1:chroot_dir:_files -/'
+	'*:packages:_devtools_completions_all_packages'
+)
+
+_devtools_completions_all_packages() {
+	typeset -U packages
+	packages=($(_call_program packages pacman -Sql))
+	compadd - "${(@)packages}"
+}
+
+_devtools() {
+	local argname="_${service//-/_}_args[@]"
+	_arguments -s "${(P)argname}"
+}
+
+_devtools