Prepare release

Stop trap_exit from forcing a 0 exit code. This fixes makechrootpkg,
which used to always return success, even if the build failed.

Signed-off-by: Pierre Schmitz <pierre@archlinux.de>

.gitignore

@@ -1,5 +1,5 @@
 *~
-devtools-*.tar.gz
+devtools-*.tar.gz*
 archbuild
 archco
 archrelease
@@ -13,3 +13,5 @@ makechrootpkg
 mkarchroot
 rebuildpkgs
 zsh_completion
+find-libdeps
+crossrepomove

Makefile

@@ -1,4 +1,4 @@
-V=0.9.29
+V=20121027
 
 PREFIX = /usr/local
 
@@ -11,7 +11,9 @@ BINPROGS = \
 	archbuild \
 	lddd \
 	finddeps \
-	rebuildpkgs
+	rebuildpkgs \
+	find-libdeps \
+	crossrepomove
 
 SBINPROGS = \
 	mkarchroot \
@@ -24,7 +26,10 @@ CONFIGFILES = \
 	pacman-testing.conf \
 	pacman-staging.conf \
 	pacman-multilib.conf \
-	pacman-multilib-testing.conf
+	pacman-multilib-testing.conf \
+	pacman-multilib-staging.conf \
+	pacman-kde-unstable.conf \
+	pacman-gnome-unstable.conf
 
 COMMITPKG_LINKS = \
 	extrapkg \
@@ -35,7 +40,10 @@ COMMITPKG_LINKS = \
 	community-testingpkg \
 	community-stagingpkg \
 	multilibpkg \
-	multilib-testingpkg
+	multilib-testingpkg \
+	multilib-stagingpkg \
+	kde-unstablepkg \
+	gnome-unstablepkg
 
 ARCHBUILD_LINKS = \
 	extra-i686-build \
@@ -45,13 +53,29 @@ ARCHBUILD_LINKS = \
 	staging-i686-build \
 	staging-x86_64-build \
 	multilib-build \
-	multilib-testing-build
+	multilib-testing-build \
+	multilib-staging-build \
+	kde-unstable-i686-build \
+	kde-unstable-x86_64-build \
+	gnome-unstable-i686-build \
+	gnome-unstable-x86_64-build
+
+CROSSREPOMOVE_LINKS = \
+	extra2community \
+	community2extra
+
+BASHCOMPLETION_LINKS = \
+	archco \
+	communityco
 
 all: $(BINPROGS) $(SBINPROGS) bash_completion zsh_completion
 
-%: %.in
+edit = sed -e "s|@pkgdatadir[@]|$(DESTDIR)$(PREFIX)/share/devtools|g"
+
+%: %.in Makefile lib/common.sh
 	@echo "GEN $@"
-	@sed -e "s|@pkgdatadir[@]|$(DESTDIR)$(PREFIX)/share/devtools|g" "$<" >"$@"
+	@$(RM) "$@"
+	@m4 -P $@.in | $(edit) >$@
 	@chmod a-w "$@"
 	@chmod +x "$@"
 
@@ -67,7 +91,10 @@ install:
 	install -m0644 ${CONFIGFILES} $(DESTDIR)$(PREFIX)/share/devtools
 	for l in ${COMMITPKG_LINKS}; do ln -sf commitpkg $(DESTDIR)$(PREFIX)/bin/$$l; done
 	for l in ${ARCHBUILD_LINKS}; do ln -sf archbuild $(DESTDIR)$(PREFIX)/bin/$$l; done
-	install -Dm0644 bash_completion $(DESTDIR)/etc/bash_completion.d/devtools
+	for l in ${CROSSREPOMOVE_LINKS}; do ln -sf crossrepomove $(DESTDIR)$(PREFIX)/bin/$$l; done
+	ln -sf find-libdeps $(DESTDIR)$(PREFIX)/bin/find-libprovides
+	install -Dm0644 bash_completion $(DESTDIR)/usr/share/bash-completion/completions/devtools
+	for l in ${BASHCOMPLETION_LINKS}; do ln -sf devtools $(DESTDIR)/usr/share/bash-completion/completions/$$l; done
 	install -Dm0644 zsh_completion $(DESTDIR)$(PREFIX)/share/zsh/site-functions/_devtools
 	ln -sf archco $(DESTDIR)$(PREFIX)/bin/communityco
 
@@ -77,14 +104,17 @@ uninstall:
 	for f in ${CONFIGFILES}; do rm -f $(DESTDIR)$(PREFIX)/share/devtools/$$f; done
 	for l in ${COMMITPKG_LINKS}; do rm -f $(DESTDIR)$(PREFIX)/bin/$$l; done
 	for l in ${ARCHBUILD_LINKS}; do rm -f $(DESTDIR)$(PREFIX)/bin/$$l; done
-	rm $(DESTDIR)/etc/bash_completion.d/devtools
+	for l in ${CROSSREPOMOVE_LINKS}; do rm -f $(DESTDIR)$(PREFIX)/bin/$$l; done
+	rm $(DESTDIR)/usr/share/bash-completion/completions/devtools
 	rm $(DESTDIR)$(PREFIX)/share/zsh/site-functions/_devtools
 	rm -f $(DESTDIR)$(PREFIX)/bin/communityco
+	rm -f $(DESTDIR)$(PREFIX)/bin/find-libprovides
 
 dist:
 	git archive --format=tar --prefix=devtools-$(V)/ $(V) | gzip -9 > devtools-$(V).tar.gz
+	gpg --detach-sign --use-agent devtools-$(V).tar.gz
 
 upload:
-	scp devtools-$(V).tar.gz gerolde.archlinux.org:/srv/ftp/other/devtools/
+	scp devtools-$(V).tar.gz devtools-$(V).tar.gz.sig gerolde.archlinux.org:/srv/ftp/other/devtools/
 
 .PHONY: all clean install uninstall dist upload

archbuild.in

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+m4_include(lib/common.sh)
+
 base_packages=(base base-devel sudo)
 
 cmd="${0##*/}"
@@ -12,7 +14,7 @@ else
 	repo=${tag%-*}
 	arch=${tag##*-}
 fi
-chroots='/var/tmp/archbuild'
+chroots='/var/lib/archbuild'
 clean_first=false
 
 usage() {
@@ -31,38 +33,42 @@ while getopts 'cr:' arg; do
 done
 
 if [[ "$EUID" != '0' ]]; then
-	echo 'This script must be run as root.'
-	exit 1
+	die 'This script must be run as root.'
 fi
 
 if ${clean_first} || [[ ! -d "${chroots}/${repo}-${arch}" ]]; then
-	echo "Creating chroot for [${repo}] (${arch})..."
+	msg "Creating chroot for [${repo}] (${arch})..."
 
 	for copy in "${chroots}/${repo}-${arch}"/*; do
 		[[ -d $copy ]] || continue
-		echo "Deleting chroot copy '$(basename "${copy}")'..."
+		msg2 "Deleting chroot copy '$(basename "${copy}")'..."
 
-		# Lock the copy
-		exec 9>"${copy}.lock"
-		flock 9
+		exec 9>"$copydir.lock"
+		if ! flock -n 9; then
+			stat_busy "Locking chroot copy '$copy'"
+			flock 9
+			stat_done
+		fi
 
 		{ type -P btrfs && btrfs subvolume delete "${copy}"; } &>/dev/null
-		rm -rf "${copy}"
+		rm -rf --one-file-system "${copy}"
 	done
 	exec 9>&-
 
-	rm -rf "${chroots}/${repo}-${arch}"
+	rm -rf --one-file-system "${chroots}/${repo}-${arch}"
 	mkdir -p "${chroots}/${repo}-${arch}"
 	setarch "${arch}" mkarchroot \
 		-C "@pkgdatadir@/pacman-${repo}.conf" \
 		-M "@pkgdatadir@/makepkg-${arch}.conf" \
 		"${chroots}/${repo}-${arch}/root" \
-		"${base_packages[@]}"
+		"${base_packages[@]}" || abort
 else
 	setarch ${arch} mkarchroot \
 		-u \
-		"${chroots}/${repo}-${arch}/root"
+		-C "@pkgdatadir@/pacman-${repo}.conf" \
+		-M "@pkgdatadir@/makepkg-${arch}.conf" \
+		"${chroots}/${repo}-${arch}/root" || abort
 fi
 
-echo "Building in chroot for [${repo}] (${arch})..."
-setarch "${arch}" makechrootpkg -c -r "${chroots}/${repo}-${arch}"
+msg "Building in chroot for [${repo}] (${arch})..."
+exec setarch "${arch}" makechrootpkg -c -n -r "${chroots}/${repo}-${arch}"

archco.in

@@ -1,8 +1,10 @@
 #!/bin/bash
 
+m4_include(lib/common.sh)
+
 scriptname=${0##*/}
 
-if [ "$1" = '' ]; then
+if [[ -z $1 ]]; then
 	echo 'Usage: '$scriptname' <package name>...'
 	exit 1
 fi
@@ -11,10 +13,9 @@ case $scriptname in
 	archco)
 		SVNURL="svn+ssh://gerolde.archlinux.org/srv/svn-packages";;
 	communityco)
-		SVNURL="svn+ssh://aur.archlinux.org/srv/svn-packages";;
+		SVNURL="svn+ssh://sigurd.archlinux.org/srv/svn-packages";;
 	*)
-		echo "error: couldn't find svn url for $scriptname"
-		exit 1
+		die "Couldn't find svn url for $scriptname"
 		;;
 esac
 

archrelease.in

@@ -1,18 +1,35 @@
 #!/bin/bash
 
-abort() {
-	echo ${1:-'archrelease: Cancelled'}
-	exit 1
-}
+m4_include(lib/common.sh)
+m4_include(lib/valid-tags.sh)
 
-if [[ -z $1 ]]; then
-	abort 'Usage: archrelease <repo>...'
+# parse command line options
+FORCE=
+while getopts ':f' flag; do
+	case $flag in
+		f) FORCE=1 ;;
+		:) die "Option requires an argument -- '$OPTARG'" ;;
+		\?) die "Invalid option -- '$OPTARG'" ;;
+	esac
+done
+shift $(( OPTIND - 1 ))
+
+if ! (( $# )); then
+	echo 'Usage: archrelease [-f] <repo>...'
+	exit 1
 fi
 
-# TODO: validate repo is really repo-arch
+# validate repo is really repo-arch
+if [[ -z $FORCE ]]; then
+	for tag in "$@"; do
+		if ! in_array "$tag" "${_tags[@]}"; then
+			die 'archrelease: Invalid tag: "'$tag'" (use -f to force release)'
+		fi
+	done
+fi
 
 if [[ ! -f PKGBUILD ]]; then
-	abort 'archrelease: PKGBUILD not found'
+	die 'archrelease: PKGBUILD not found'
 fi
 
 trunk=${PWD##*/}
@@ -21,24 +38,27 @@ trunk=${PWD##*/}
 # such as 'gnome-unstable'
 IFS='/' read -r -d '' -a parts <<< "$PWD"
 if [[ "${parts[@]:(-2):1}" == "repos" ]]; then
-	abort 'archrelease: Should not be in repos dir (try from trunk/)'
+	die 'archrelease: Should not be in repos dir (try from trunk/)'
 fi
 unset parts
 
 if [[ $(svn status -q) ]]; then
-	abort 'archrelease: You have not committed your changes yet!'
+	die 'archrelease: You have not committed your changes yet!'
 fi
 
 pushd .. >/dev/null
 IFS=$'\n' read -r -d '' -a known_files < <(svn ls -r HEAD "$trunk")
 for file in "${known_files[@]}"; do
 	if [[ ${file:(-1)} = '/' ]]; then
-		abort "archrelease: subdirectories are not supported in package directories!"
+		die "archrelease: subdirectories are not supported in package directories!"
 	fi
 done
 
+# gracefully handle files containing an "@" character
+known_files=("${known_files[@]/%/@}")
+
 for tag in "$@"; do
-	echo -n "copying ${trunk} to ${tag}..."
+	stat_busy "Copying ${trunk} to ${tag}"
 
 	if [[ -d repos/$tag ]]; then
 		declare -a trash
@@ -46,7 +66,7 @@ for tag in "$@"; do
 		while read -r file; do
 			trash+=("repos/$tag/$file")
 		done < <(svn ls "repos/$tag")
-		[[ $trash ]] && svn rm -q "${trash[@]}"
+		[[ $trash ]] && svn rm -q "${trash[@]/%/@}"
 	else
 		mkdir -p "repos/$tag"
 		svn add --parents -q "repos/$tag"
@@ -55,12 +75,12 @@ for tag in "$@"; do
 	# copy all files at once from trunk to the subdirectory in repos/
 	svn copy -q -r HEAD ${known_files[@]/#/$trunk/} "repos/$tag/"
 
-	echo 'done'
+	stat_done
 done
 
-echo -n "releasing package..."
+stat_busy "Releasing package"
 printf -v tag_list ", %s" "$@"; tag_list="${tag_list#, }"
 svn commit -q -m "archrelease: copy ${trunk} to $tag_list" || abort
-echo 'done'
+stat_done
 
 popd >/dev/null

archrm.in

@@ -1,6 +1,8 @@
 #!/bin/bash
 
-if [ "$1" = '' ]; then
+m4_include(lib/common.sh)
+
+if [[ -z $1 ]]; then
 	echo 'Usage: archrm <path to checkout>'
 	exit 1
 fi

checkpkg.in

@@ -1,11 +1,12 @@
 #!/bin/bash
 
+m4_include(lib/common.sh)
+
 # Source makepkg.conf; fail if it is not found
 if [[ -r '/etc/makepkg.conf' ]]; then
 	source '/etc/makepkg.conf'
 else
-	echo '/etc/makepkg.conf not found!'
-	exit 1
+	die '/etc/makepkg.conf not found!'
 fi
 
 # Source user-specific makepkg.conf overrides
@@ -14,8 +15,7 @@ if [[ -r ~/.makepkg.conf ]]; then
 fi
 
 if [[ ! -f PKGBUILD ]]; then
-	echo 'This must be run in the directory of a built package.'
-	exit 1
+	die 'This must be run in the directory of a built package.'
 fi
 
 . PKGBUILD
@@ -28,33 +28,26 @@ TEMPDIR=$(mktemp -d --tmpdir checkpkg-script.XXXX)
 cd "$TEMPDIR"
 
 for _pkgname in "${pkgname[@]}"; do
-	if [[ -z ${epoch} ]] ; then
-		pkgfile=${_pkgname}-${pkgver}-${pkgrel}-${CARCH}${PKGEXT}
-	else
-		pkgfile=${_pkgname}-${epoch}:${pkgver}-${pkgrel}-${CARCH}${PKGEXT}
-	fi
+	pkgfile=${_pkgname}-$(get_full_version $_pkgname)-${CARCH}${PKGEXT}
 
 	if [[ -f "$STARTDIR/$pkgfile" ]]; then
 		ln -s "$STARTDIR/$pkgfile" "$pkgfile"
 	elif [[ -f "$PKGDEST/$pkgfile" ]]; then
 		ln -s "$PKGDEST/$pkgfile" "$pkgfile"
 	else
-		echo "File \"$pkgfile\" doesn't exist"
-		exit 1
+		die "File \"$pkgfile\" doesn't exist"
 	fi
 
 	pkgurl=$(pacman -Spdd --print-format '%l' --noconfirm "$_pkgname")
 
 	if [[ $? -ne 0 ]]; then
-		echo "Couldn't download previous package for $_pkgname."
-		exit 1
+		die "Couldn't download previous package for $_pkgname."
 	fi
 
 	oldpkg=${pkgurl##*://*/}
 
 	if [[ ${oldpkg##*/} = ${pkgfile##*/} ]]; then
-		echo "The built package ($_pkgname) is the one in the repo right now!"
-		exit 1
+		die "The built package ($_pkgname) is the one in the repo right now!"
 	fi
 
 	if [[ ! -f $oldpkg ]]; then
@@ -83,8 +76,8 @@ for _pkgname in "${pkgname[@]}"; do
 		done
 		cd ..
 	else
-		echo "No soname differences for $_pkgname."
+		msg "No soname differences for $_pkgname."
 	fi
 done
 
-echo "Files saved to $TEMPDIR"
+msg "Files saved to $TEMPDIR"

commitpkg.in

@@ -1,51 +1,39 @@
 #!/bin/bash
 
-abort() {
-	echo ${1:-'Cancelled'}
-	exit 1
-}
+m4_include(lib/common.sh)
 
 getpkgfile() {
-	if [[ ${#} -ne 1 ]]; then
-		echo 'ERROR: No canonical package found!' >&2
-		exit 1
-	elif [ ! -f "${1}" ]; then
-		echo "ERROR: Package ${1} not found!" >&2
-		exit 1
-	fi
+	case $# in
+		0)
+			error 'No canonical package found!'
+			return 1
+			;;
+		[!1])
+			error 'Failed to canonicalize package name -- multiple packages found:'
+			msg2 '%s' "$@"
+			return 1
+			;;
+	esac
 
-	echo ${1}
-}
-
-##
-#  usage : get_full_version( $epoch, $pkgver, $pkgrel )
-# return : full version spec, including epoch (if necessary), pkgver, pkgrel
-##
-get_full_version() {
-	if [[ $1 -eq 0 ]]; then
-		# zero epoch case, don't include it in version
-		echo $2-$3
-	else
-		echo $1:$2-$3
-	fi
+	echo "$1"
 }
 
 # Source makepkg.conf; fail if it is not found
-if [ -r '/etc/makepkg.conf' ]; then
+if [[ -r '/etc/makepkg.conf' ]]; then
 	source '/etc/makepkg.conf'
 else
-	abort '/etc/makepkg.conf not found!'
+	die '/etc/makepkg.conf not found!'
 fi
 
 # Source user-specific makepkg.conf overrides
-if [ -r ~/.makepkg.conf ]; then
+if [[ -r ~/.makepkg.conf ]]; then
 	. ~/.makepkg.conf
 fi
 
 cmd=${0##*/}
 
-if [ ! -f PKGBUILD ]; then
-	abort 'No PKGBUILD file'
+if [[ ! -f PKGBUILD ]]; then
+	die 'No PKGBUILD file'
 fi
 
 . PKGBUILD
@@ -53,8 +41,8 @@ pkgbase=${pkgbase:-$pkgname}
 
 case "$cmd" in
 	commitpkg)
-		if [ $# -eq 0 ]; then
-			abort 'usage: commitpkg <reponame> [-l limit] [-a arch] [commit message]'
+		if (( $# == 0 )); then
+			die 'usage: commitpkg <reponame> [-f] [-s server] [-l limit] [-a arch] [commit message]'
 		fi
 		repo="$1"
 		shift
@@ -63,145 +51,174 @@ case "$cmd" in
 		repo="${cmd%pkg}"
 		;;
 	*)
-		abort 'usage: commitpkg <reponame> [-l limit] [-a arch] [commit message]'
+		die 'usage: commitpkg <reponame> [-f] [-s server] [-l limit] [-a arch] [commit message]'
 		;;
 esac
 
-case "$repo" in
-	core|extra|testing|staging)
-		server='gerolde.archlinux.org' ;;
-	community*|multilib*)
-		server='aur.archlinux.org' ;;
-	*)
-		server='gerolde.archlinux.org'
-		echo "Non-standard repository $repo in use, defaulting to server $server" ;;
-esac
-
 # check if all local source files are under version control
 for s in "${source[@]}"; do
-	if [[ $s != *://* ]] && ! svn status -v "$s" | grep -q '^[ AMRX~]'; then
-		abort "$s is not under version control"
+	if [[ $s != *://* ]] && ! svn status -v "$s@" | grep -q '^[ AMRX~]'; then
+		die "$s is not under version control"
 	fi
 done
 
 # check if changelog and install files are under version control
 for i in 'changelog' 'install'; do
-	filelist=$(sed -n "s/^[[:space:]]*$i=//p" PKGBUILD)
-	for file in $filelist; do
+	while read -r file; do
 		# evaluate any bash variables used
-		eval file=${file}
+		eval file=\"$(sed 's/^\(['\''"]\)\(.*\)\1$/\2/' <<< "$file")\"
 		if ! svn status -v "${file}" | grep -q '^[ AMRX~]'; then
-			abort "${file} is not under version control"
+			die "${file} is not under version control"
 		fi
-	done
+	done < <(sed -n "s/^[[:space:]]*$i=//p" PKGBUILD)
 done
 
-# see if any limit options were passed, we'll send them to rsync
 rsyncopts=(-e ssh -p --chmod=ug=rw,o=r -c -h -L --progress --partial -y)
-while getopts ':l:a:' flag; do
+archreleaseopts=()
+while getopts ':l:a:s:f' flag; do
 	case $flag in
-		l) rsyncopts+=("--bwlimit=$2") ;;
-		a) commit_arch=$2 ;;
-		:) echo "option requires an argument -- '$OPTARG'" >&2
-			exit 1 ;;
-		\?) echo "invalid option -- '$OPTARG'" >&2
-			exit 1 ;;
+		f) archreleaseopts+=('-f') ;;
+		s) server=$OPTARG ;;
+		l) rsyncopts+=("--bwlimit=$OPTARG") ;;
+		a) commit_arch=$OPTARG ;;
+		:) die "Option requires an argument -- '$OPTARG'" ;;
+		\?) die "Invalid option -- '$OPTARG'" ;;
 	esac
 done
 shift $(( OPTIND - 1 ))
 
-if [ -n "$(svn status -q)" ]; then
-	echo -n 'committing changes to trunk...'
-	msgtemplate="upgpkg: $pkgbase $(get_full_version ${epoch:-0} $pkgver $pkgrel)"$'\n\n'
-	if [ -n "$1" ]; then
-		svn commit -q -m "${msgtemplate}${1}" || abort
-	else
-		msgfile="$(mktemp)"
-		echo "$msgtemplate" > "$msgfile"
-		if [ -n "$SVN_EDITOR" ]; then
-			$SVN_EDITOR "$msgfile"
-		elif [ -n "$VISUAL" ]; then
-			$VISUAL "$msgfile"
-		elif [ -n "$EDITOR" ]; then
-			$EDITOR "$msgfile"
-		else
-			vi "$msgfile"
-		fi
-		[ -s "$msgfile" ] || abort
-		svn commit -q -F "$msgfile" || abort
-		unlink "$msgfile"
-	fi
-	echo 'done'
-fi
-
-declare -a uploads
-
+# check packages have the packager field set
 for _arch in ${arch[@]}; do
-	if [ -n "$commit_arch" ] && [ "${_arch}" != "$commit_arch" ]; then
-		echo "skipping ${_arch}"
+	if [[ -n $commit_arch && ${_arch} != "$commit_arch" ]]; then
 		continue
 	fi
-
 	for _pkgname in ${pkgname[@]}; do
-		fullver=$(get_full_version ${epoch:-0} $pkgver $pkgrel)
-		pkgfile=$(getpkgfile "$_pkgname-$fullver-${_arch}".pkg.tar.?z 2>/dev/null)
-		pkgdestfile=$(getpkgfile "$PKGDEST/$_pkgname-$fullver-${_arch}".pkg.tar.?z 2>/dev/null)
+		fullver=$(get_full_version $_pkgname)
 
-		if [ -f "$pkgfile" ]; then
-			pkgfile="./$pkgfile"
-		elif [ -f "$pkgdestfile" ]; then
-			pkgfile="$pkgdestfile"
-		else
-			echo "skipping ${_arch}"
-			continue 2
-		fi
-		uploads+=("$pkgfile")
-
-		if [[ $SIGNPKG == 'y' ]]; then
-			echo "Signing package ${pkgfile}..."
-			if [[ -n $GPGKEY ]]; then
-				SIGNWITHKEY="-u ${GPGKEY}"
+		if pkgfile=$(shopt -s nullglob;
+				getpkgfile "${PKGDEST+$PKGDEST/}$_pkgname-$fullver-${_arch}".pkg.tar.?z); then
+			if grep -q "packager = Unknown Packager" <(bsdtar -xOqf $pkgfile .PKGINFO); then
+				die "PACKAGER was not set when building package"
 			fi
-			gpg --detach-sign --use-agent ${SIGNWITHKEY} "${pkgfile}" || abort
-		fi
-
-		sigfile="${pkgfile}.sig"
-		if [ -f "${sigfile}" ]; then
-			uploads+=("$sigfile")
-		elif [[ $SIGNPKG == 'y' ]]; then
-			abort "Signature ${pkgfile}.sig was not found"
 		fi
 	done
 done
 
-if [[ -n $commit_arch ]]; then
-	archrelease "$repo-$commit_arch" || abort
-else
-	archrelease "${arch[@]/#/$repo-}" || abort
+if [[ -z $server ]]; then
+	case "$repo" in
+		core|extra|testing|staging|kde-unstable|gnome-unstable)
+			server='gerolde.archlinux.org' ;;
+		community*|multilib*)
+			server='sigurd.archlinux.org' ;;
+		*)
+			server='gerolde.archlinux.org'
+			msg "Non-standard repository $repo in use, defaulting to server $server" ;;
+	esac
+fi
+
+if [[ -n $(svn status -q) ]]; then
+	msgtemplate="upgpkg: $pkgbase $(get_full_version)"$'\n\n'
+	if [[ -n $1 ]]; then
+		stat_busy 'Committing changes to trunk'
+		svn commit -q -m "${msgtemplate}${1}" || die
+		stat_done
+	else
+		msgfile="$(mktemp)"
+		echo "$msgtemplate" > "$msgfile"
+		if [[ -n $SVN_EDITOR ]]; then
+			$SVN_EDITOR "$msgfile"
+		elif [[ -n $VISUAL ]]; then
+			$VISUAL "$msgfile"
+		elif [[ -n $EDITOR ]]; then
+			$EDITOR "$msgfile"
+		else
+			vi "$msgfile"
+		fi
+		[[ -s $msgfile ]] || die
+		stat_busy 'Committing changes to trunk'
+		svn commit -q -F "$msgfile" || die
+		unlink "$msgfile"
+		stat_done
+	fi
+fi
+
+declare -a uploads
+declare -a commit_arches
+declare -a skip_arches
+
+for _arch in ${arch[@]}; do
+	if [[ -n $commit_arch && ${_arch} != "$commit_arch" ]]; then
+		skip_arches+=($_arch)
+		continue
+	fi
+
+	for _pkgname in ${pkgname[@]}; do
+		fullver=$(get_full_version $_pkgname)
+
+		if ! pkgfile=$(shopt -s nullglob;
+				getpkgfile "${PKGDEST+$PKGDEST/}$_pkgname-$fullver-${_arch}".pkg.tar.?z); then
+			warning "Skipping $_pkgname-$fullver-$_arch: failed to locate package file"
+			skip_arches+=($_arch)
+			continue 2
+		fi
+		uploads+=("$pkgfile")
+
+		sigfile="${pkgfile}.sig"
+		if [[ ! -f $sigfile ]]; then
+			msg "Signing package ${pkgfile}..."
+			if [[ -n $GPGKEY ]]; then
+				SIGNWITHKEY="-u ${GPGKEY}"
+			fi
+			gpg --detach-sign --use-agent ${SIGNWITHKEY} "${pkgfile}" || die
+		fi
+		if ! gpg --verify "$sigfile" >/dev/null 2>&1; then
+			die "Signature ${pkgfile}.sig is incorrect!"
+		fi
+		uploads+=("$sigfile")
+	done
+done
+
+for _arch in ${arch[@]}; do
+	if ! in_array $_arch ${skip_arches[@]}; then
+		commit_arches+=($_arch)
+	fi
+done
+
+if [[ ${#commit_arches[*]} -gt 0 ]]; then
+	archrelease "${archreleaseopts[@]}" "${commit_arches[@]/#/$repo-}" || die
 fi
 
 if [[ ${#uploads[*]} -gt 0 ]]; then
-	echo 'uploading all package and signature files'
-	rsync "${rsyncopts[@]}" "${uploads[@]}" "$server:staging/$repo/" || abort
+	new_uploads=()
+
+	# convert to absolute paths so rsync can work with colons (epoch)
+	while read -r -d '' upload; do
+		new_uploads+=("$upload")
+	done < <(realpath -z "${uploads[@]}")
+
+	uploads=("${new_uploads[@]}")
+	unset new_uploads
+	msg 'Uploading all package and signature files'
+	rsync "${rsyncopts[@]}" "${uploads[@]}" "$server:staging/$repo/" || die
 fi
 
-if [ "${arch[*]}" == 'any' ]; then
-	if [ -d ../repos/$repo-i686 -a -d ../repos/$repo-x86_64 ]; then
+if [[ "${arch[*]}" == 'any' ]]; then
+	if [[ -d ../repos/$repo-i686 && -d ../repos/$repo-x86_64 ]]; then
 		pushd ../repos/ >/dev/null
-		echo "removing $repo-i686 and $repo-x86_64..."
-		svn rm $repo-i686
-		svn rm $repo-x86_64
-		svn commit -q -m "removed $repo-i686 and $repo-x86_64 for $pkgname"
-		echo 'done'
+		stat_busy "Removing $repo-i686 and $repo-x86_64"
+		svn rm -q $repo-i686
+		svn rm -q $repo-x86_64
+		svn commit -q -m "Removed $repo-i686 and $repo-x86_64 for $pkgname"
+		stat_done
 		popd >/dev/null
 	fi
 else
-	if [ -d ../repos/$repo-any ]; then
+	if [[ -d ../repos/$repo-any ]]; then
 		pushd ../repos/ >/dev/null
-		echo "removing $repo-any..."
-		svn rm $repo-any
-		svn commit -q -m "removed $repo-any for $pkgname"
-		echo 'done'
+		stat_busy "Removing $repo-any"
+		svn rm -q $repo-any
+		svn commit -q -m "Removed $repo-any for $pkgname"
+		stat_done
 		popd >/dev/null
 	fi
 fi

crossrepomove.in

@@ -0,0 +1,86 @@
+#!/bin/bash
+
+m4_include(lib/common.sh)
+
+scriptname=${0##*/}
+
+if [[ -z $1 ]]; then
+	echo 'Usage: '$scriptname' [pkgbase]'
+	exit 1
+fi
+
+pkgbase="${1}"
+
+packages_svn='svn+ssh://gerolde.archlinux.org/srv/svn-packages'
+packages_server='gerolde.archlinux.org'
+community_svn='svn+ssh://sigurd.archlinux.org/srv/svn-packages'
+community_server='sigurd.archlinux.org'
+mirror='http://mirrors.kernel.org/archlinux'
+
+case $scriptname in
+	extra2community)
+		source_svn="${packages_svn}"
+		target_svn="${community_svn}"
+		source_server="${packages_server}"
+		target_server="${community_server}"
+		source_repo='extra'
+		target_repo='community'
+		;;
+	community2extra)
+		source_svn="${community_svn}"
+		target_svn="${packages_svn}"
+		source_server="${community_server}"
+		target_server="${packages_server}"
+		source_repo='community'
+		target_repo='extra'
+		;;
+	*)
+		die "Couldn't find configuration for $scriptname"
+		;;
+esac
+
+setup_workdir
+
+pushd $WORKDIR >/dev/null
+
+msg "Downloading sources for ${pkgbase}"
+svn -q checkout -N "${target_svn}" target_checkout
+mkdir -p "target_checkout/${pkgbase}/repos"
+svn -q export "${source_svn}/${pkgbase}/trunk" "target_checkout/${pkgbase}/trunk" || die
+. "target_checkout/${pkgbase}/trunk/PKGBUILD"
+
+msg "Downloading packages for ${pkgbase}"
+for _arch in ${arch[@]}; do
+	if [[ "${_arch[*]}" == 'any' ]]; then
+		repo_arch='x86_64'
+	else
+		repo_arch=${_arch}
+	fi
+	for _pkgname in ${pkgname[@]}; do
+		fullver=$(get_full_version $_pkgname)
+		# FIXME: this only works with .xz packages
+		ssh "${target_server}" "cd staging/${target_repo}
+			curl -O ${mirror}/${source_repo}/os/${repo_arch}/$_pkgname-$fullver-${_arch}.pkg.tar.xz
+			curl -O ${mirror}/${source_repo}/os/${repo_arch}/$_pkgname-$fullver-${_arch}.pkg.tar.xz.sig" || die
+	done
+done
+
+msg "Adding ${pkgbase} to ${target_repo}"
+svn -q add "target_checkout/${pkgbase}"
+svn -q propset svn:keywords 'Id' "target_checkout/${pkgbase}/trunk/PKGBUILD"
+svn -q commit -m"${scriptname}: Moving ${pkgbase} from ${source_repo} to ${target_repo}" target_checkout
+pushd "target_checkout/${pkgbase}/trunk" >/dev/null
+archrelease "${arch[@]/#/$target_repo-}" || die
+popd >/dev/null
+ssh "${target_server}" '/arch/db-update' || die
+
+msg "Removing ${pkgbase} from ${source_repo}"
+for _arch in ${arch[@]}; do
+	ssh "${source_server}" "/arch/db-remove ${source_repo} ${_arch} ${pkgbase}"
+done
+svn -q checkout -N "${source_svn}" source_checkout
+svn -q up "source_checkout/${pkgbase}"
+svn -q rm "source_checkout/${pkgbase}"
+svn -q commit -m"${scriptname}: Moving ${pkgbase} from ${source_repo} to ${target_repo}" source_checkout
+
+popd >/dev/null

find-libdeps.in

@@ -0,0 +1,87 @@
+#!/bin/bash
+
+m4_include(lib/common.sh)
+
+set -e
+shopt -s extglob
+
+IGNORE_INTERNAL=0
+
+if [[ $1 = "--ignore-internal" ]]; then
+	IGNORE_INTERNAL=1
+	shift
+fi
+
+script_mode=${0##*/find-lib}
+
+case $script_mode in
+	deps|provides) true;;
+	*) die "Unknown mode $script_mode" ;;
+esac
+
+if [[ -z $1 ]]; then
+	echo "${0##*/} [options] <package file|extracted package dir>"
+	echo "Options:"
+	echo "    --ignore-internal      ignore internal libraries"
+	exit 1
+fi
+
+if [[ -d $1 ]]; then
+	pushd $1 >/dev/null
+else
+	setup_workdir
+
+	case ${script_mode} in
+		deps) bsdtar -C $WORKDIR -xf "$1";;
+		provides) bsdtar -C $WORKDIR -xf "$1" --include="*.so*";;
+	esac
+
+	pushd $WORKDIR >/dev/null
+fi
+
+process_sofile() {
+	# extract the library name: libfoo.so
+	soname="${sofile%.so?(+(.+([0-9])))}".so
+	# extract the major version: 1
+	soversion="${sofile##*\.so\.}"
+	if [[ "$soversion" = "$sofile" ]] && (($IGNORE_INTERNAL)); then
+		continue
+	fi
+	if ! in_array "${soname}=${soversion}-${soarch}" ${soobjects[@]}; then
+		# libfoo.so=1-64
+		echo "${soname}=${soversion}-${soarch}"
+		soobjects=(${soobjects[@]} "${soname}=${soversion}-${soarch}")
+	fi
+}
+
+case $script_mode in
+	deps) find_args="-perm -u+x";;
+	provides) find_args="-name *.so*";;
+esac
+
+find . -type f $find_args | while read filename; do
+	if [[ $script_mode = "provides" ]]; then
+		# ignore if we don't have a shared object
+		if ! LC_ALL=C readelf -h "$filename" 2>/dev/null | grep -q '.*Type:.*DYN (Shared object file).*'; then
+			continue
+		fi
+	fi
+
+	# get architecture of the file; if soarch is empty it's not an ELF binary
+	soarch=$(LC_ALL=C readelf -h "$filename" 2>/dev/null | sed -n 's/.*Class.*ELF\(32\|64\)/\1/p')
+	[[ -n $soarch ]] || continue
+
+	if [[ $script_mode = "provides" ]]; then
+		# get the string binaries link to: libfoo.so.1.2 -> libfoo.so.1
+		sofile=$(LC_ALL=C readelf -d "$filename" 2>/dev/null | sed -n 's/.*Library soname: \[\(.*\)\].*/\1/p')
+		[[ -z $sofile ]] && sofile="${filename##*/}"
+		process_sofile
+	elif [[ $script_mode = "deps" ]]; then
+		# process all libraries needed by the binary
+		for sofile in $(LC_ALL=C readelf -d "$filename" 2>/dev/null | sed -nr 's/.*Shared library: \[(.*)\].*/\1/p'); do
+			process_sofile
+		done
+	fi
+done
+
+popd >/dev/null

finddeps.in

@@ -3,6 +3,8 @@
 # finddeps - find packages that depend on a given depname
 #
 
+m4_include(lib/common.sh)
+
 match=$1
 
 if [[ -z $match ]]; then
@@ -11,7 +13,7 @@ if [[ -z $match ]]; then
 	echo 'Find packages that depend on a given depname.'
 	echo 'Run this script from the top-level directory of your ABS tree.'
 	echo ''
-	exit 0
+	exit 1
 fi
 
 find . -type d | while read d; do

lddd.in

@@ -1,8 +1,10 @@
-#!/bin/sh
+#!/bin/bash
 #
 # lddd - find broken library links on your machine
 #
 
+m4_include(lib/common.sh)
+
 ifs=$IFS
 IFS="${IFS}:"
 
@@ -11,10 +13,10 @@ extras=
 
 TEMPDIR=$(mktemp -d --tmpdir lddd-script.XXXX)
 
-echo 'Go out and drink some tea, this will take a while :) ...'
+msg 'Go out and drink some tea, this will take a while :) ...'
 #  Check ELF binaries in the PATH and specified dir trees.
 for tree in $PATH $libdirs $extras; do
-	echo DIR $tree
+	msg2 "DIR $tree"
 
 	#  Get list of files in tree.
 	files=$(find $tree -type f ! -name '*.a' ! -name '*.la' ! -name '*.py*' ! -name '*.txt' ! -name '*.h' ! -name '*.ttf' ! \
@@ -25,9 +27,9 @@ for tree in $PATH $libdirs $extras; do
 	-name '*.mcopclass' ! -name '*.mcoptype')
 	IFS=$ifs
 	for i in $files; do
-		if [ $(file $i | grep -c 'ELF') -ne 0 ]; then
+		if (( $(file $i | grep -c 'ELF') != 0 )); then
 			#  Is an ELF binary.
-			if [ $(ldd $i 2>/dev/null | grep -c 'not found') -ne 0 ]; then
+			if (( $(ldd $i 2>/dev/null | grep -c 'not found') != 0 )); then
 				#  Missing lib.
 				echo "$i:" >> $TEMPDIR/raw.txt
 				ldd $i 2>/dev/null | grep 'not found' >> $TEMPDIR/raw.txt
@@ -43,4 +45,4 @@ done
 # clean list
 sort -u $TEMPDIR/pacman.txt >> $TEMPDIR/possible-rebuilds.txt
 
-echo "Files saved to $TEMPDIR"
+msg "Files saved to $TEMPDIR"

lib/common.sh

@@ -0,0 +1,132 @@
+# Avoid any encoding problems
+export LANG=C
+
+# check if messages are to be printed using color
+unset ALL_OFF BOLD BLUE GREEN RED YELLOW
+if [[ -t 2 ]]; then
+	# prefer terminal safe colored and bold text when tput is supported
+	if tput setaf 0 &>/dev/null; then
+		ALL_OFF="$(tput sgr0)"
+		BOLD="$(tput bold)"
+		BLUE="${BOLD}$(tput setaf 4)"
+		GREEN="${BOLD}$(tput setaf 2)"
+		RED="${BOLD}$(tput setaf 1)"
+		YELLOW="${BOLD}$(tput setaf 3)"
+	else
+		ALL_OFF="\e[1;0m"
+		BOLD="\e[1;1m"
+		BLUE="${BOLD}\e[1;34m"
+		GREEN="${BOLD}\e[1;32m"
+		RED="${BOLD}\e[1;31m"
+		YELLOW="${BOLD}\e[1;33m"
+	fi
+fi
+readonly ALL_OFF BOLD BLUE GREEN RED YELLOW
+
+plain() {
+	local mesg=$1; shift
+	printf "${BOLD}    ${mesg}${ALL_OFF}\n" "$@" >&2
+}
+
+msg() {
+	local mesg=$1; shift
+	printf "${GREEN}==>${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
+}
+
+msg2() {
+	local mesg=$1; shift
+	printf "${BLUE}  ->${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
+}
+
+warning() {
+	local mesg=$1; shift
+	printf "${YELLOW}==> WARNING:${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
+}
+
+error() {
+	local mesg=$1; shift
+	printf "${RED}==> ERROR:${ALL_OFF}${BOLD} ${mesg}${ALL_OFF}\n" "$@" >&2
+}
+
+stat_busy() {
+	local mesg=$1; shift
+	printf "${GREEN}==>${ALL_OFF}${BOLD} ${mesg}...${ALL_OFF}" >&2
+}
+
+stat_done() {
+	printf "${BOLD}done${ALL_OFF}\n" >&2
+}
+
+setup_workdir() {
+	[[ -z $WORKDIR ]] && WORKDIR=$(mktemp -d --tmpdir "${0##*/}.XXXXXXXXXX")
+}
+
+cleanup() {
+	[[ -n $WORKDIR ]] && rm -rf "$WORKDIR"
+	[[ $1 ]] && exit $1
+}
+
+abort() {
+	msg 'Aborting...'
+	cleanup 0
+}
+
+trap_abort() {
+	trap - EXIT INT QUIT TERM HUP
+	abort
+}
+
+trap_exit() {
+	trap - EXIT INT QUIT TERM HUP
+	cleanup
+}
+
+die() {
+	error "$*"
+	cleanup 1
+}
+
+trap 'trap_abort' INT QUIT TERM HUP
+trap 'trap_exit' EXIT
+
+##
+#  usage : in_array( $needle, $haystack )
+# return : 0 - found
+#          1 - not found
+##
+in_array() {
+	local needle=$1; shift
+	local item
+	for item in "$@"; do
+		[[ $item = $needle ]] && return 0 # Found
+	done
+	return 1 # Not Found
+}
+
+##
+#  usage : get_full_version( [$pkgname] )
+# return : full version spec, including epoch (if necessary), pkgver, pkgrel
+##
+get_full_version() {
+	# set defaults if they weren't specified in buildfile
+	pkgbase=${pkgbase:-${pkgname[0]}}
+	epoch=${epoch:-0}
+	if [[ -z $1 ]]; then
+		if [[ $epoch ]] && (( ! $epoch )); then
+			echo $pkgver-$pkgrel
+		else
+			echo $epoch:$pkgver-$pkgrel
+		fi
+	else
+		for i in pkgver pkgrel epoch; do
+			local indirect="${i}_override"
+			eval $(declare -f package_$1 | sed -n "s/\(^[[:space:]]*$i=\)/${i}_override=/p")
+			[[ -z ${!indirect} ]] && eval ${indirect}=\"${!i}\"
+		done
+		if (( ! $epoch_override )); then
+			echo $pkgver_override-$pkgrel_override
+		else
+			echo $epoch_override:$pkgver_override-$pkgrel_override
+		fi
+	fi
+}

lib/valid-tags.sh

@@ -0,0 +1,20 @@
+_arch=(
+	i686
+	x86_64
+	any
+)
+
+_tags=(
+	core-i686 core-x86_64 core-any
+	extra-i686 extra-x86_64 extra-any
+	multilib-x86_64
+	staging-i686 staging-x86_64 staging-any
+	testing-i686 testing-x86_64 testing-any
+	multilib-testing-x86_64
+	multilib-staging-x86_64
+	community-i686 community-x86_64 community-any
+	community-staging-i686 community-staging-x86_64 community-staging-any
+	community-testing-i686 community-testing-x86_64 community-testing-any
+	kde-unstable-i686 kde-unstable-x86_64 kde-unstable-any
+	gnome-unstable-i686 gnome-unstable-x86_64 gnome-unstable-any
+)

makechrootpkg.in

@@ -8,6 +8,8 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
+m4_include(lib/common.sh)
+
 shopt -s nullglob
 
 makepkg_args='-s --noconfirm -L'
@@ -18,10 +20,12 @@ install_pkg=
 add_to_db=false
 run_namcap=false
 chrootdir=
+passeddir=
 
 default_copy=$USER
 [[ -n $SUDO_USER ]] && default_copy=$SUDO_USER
 [[ -z $default_copy || $default_copy = root ]] && default_copy=copy
+src_owner=${SUDO_USER:-$USER}
 
 usage() {
 	echo "usage ${0##*/} [options] -r <chrootdir> [--] [makepkg args]"
@@ -50,8 +54,8 @@ usage() {
 	echo '-I <pkg>   Install a package into the working copy of the chroot'
 	echo '-l <copy>  The directory to use as the working copy of the chroot'
 	echo '           Useful for maintaining multiple copies.'
-	echo '-n         Run namcap on the package'
 	echo "           Default: $default_copy"
+	echo '-n         Run namcap on the package'
 	exit 1
 }
 
@@ -61,16 +65,16 @@ while getopts 'hcudr:I:l:n' arg; do
 		c) clean_first=true ;;
 		u) update_first=true ;;
 		d) add_to_db=true ;;
-		r) chrootdir="$OPTARG" ;;
+		r) passeddir="$OPTARG" ;;
 		I) install_pkg="$OPTARG" ;;
 		l) copy="$OPTARG" ;;
-		n) run_namcap=true ;;
+		n) run_namcap=true; makepkg_args="$makepkg_args -i" ;;
 		*) makepkg_args="$makepkg_args -$arg $OPTARG" ;;
 	esac
 done
 
 # Canonicalize chrootdir, getting rid of trailing /
-chrootdir=$(readlink -e "$chrootdir")
+chrootdir=$(readlink -e "$passeddir")
 
 if [[ ${copy:0:1} = / ]]; then
 	copydir=$copy
@@ -85,30 +89,25 @@ makepkg_args="$makepkg_args ${*:$OPTIND}"
 # See if -R was passed to makepkg
 for arg in ${*:$OPTIND}; do
 	if [[ $arg = -R ]]; then
-		repack=1
+		repack=true
 		break
 	fi
 done
 
 if (( EUID )); then
-	echo 'This script must be run as root.'
-	exit 1
+	die 'This script must be run as root.'
 fi
 
 if [[ ! -f PKGBUILD && -z $install_pkg ]]; then
-	echo 'This must be run in a directory containing a PKGBUILD.'
-	exit 1
+	die 'This must be run in a directory containing a PKGBUILD.'
 fi
 
 if [[ ! -d $chrootdir ]]; then
-	echo "No chroot dir defined, or invalid path '$chrootdir'"
-	exit 1
+	die "No chroot dir defined, or invalid path '$passeddir'"
 fi
 
 if [[ ! -d $chrootdir/root ]]; then
-	echo 'Missing chroot dir root directory.'
-	echo "Try using: mkarchroot $chrootdir/root base base-devel sudo"
-	exit 1
+	die "Missing chroot dir root directory. Try using: mkarchroot $chrootdir/root base base-devel sudo"
 fi
 
 umask 0022
@@ -117,9 +116,9 @@ umask 0022
 # Note this is the same FD number as in mkarchroot
 exec 9>"$copydir.lock"
 if ! flock -n 9; then
-	echo -n "locking chroot copy '$copy'..."
+	stat_busy "Locking chroot copy '$copy'"
 	flock 9
-	echo "done"
+	stat_done
 fi
 
 if [[ ! -d $copydir ]] || $clean_first; then
@@ -128,12 +127,12 @@ if [[ ! -d $copydir ]] || $clean_first; then
 	exec 8>"$chrootdir/root.lock"
 
 	if ! flock -sn 8; then
-		echo -n "locking clean chroot..."
+		stat_busy "Locking clean chroot"
 		flock -s 8
-		echo "done"
+		stat_done
 	fi
 
-	echo -n 'creating clean working copy...'
+	stat_busy 'Creating clean working copy'
 	use_rsync=false
 	if type -P btrfs >/dev/null; then
 		[[ -d $copydir ]] && btrfs subvolume delete "$copydir" &>/dev/null
@@ -147,7 +146,7 @@ if [[ ! -d $copydir ]] || $clean_first; then
 		mkdir -p "$copydir"
 		rsync -a --delete -q -W -x "$chrootdir/root/" "$copydir"
 	fi
-	echo 'done'
+	stat_done
 
 	# Drop the read lock again
 	exec 8>&-
@@ -173,11 +172,18 @@ mkdir -p "$copydir/build"
 # Remove anything in there UNLESS -R (repack) was passed to makepkg
 $repack || rm -rf "$copydir"/build/*
 
-# Read .makepkg.conf even if called via sudo
+# Read .makepkg.conf and .gnupg/pubring.gpg even if called via sudo
 if [[ -n $SUDO_USER ]]; then
-	makepkg_conf="$(eval echo ~$SUDO_USER)/.makepkg.conf"
+	SUDO_HOME="$(eval echo ~$SUDO_USER)"
+	makepkg_conf="$SUDO_HOME/.makepkg.conf"
+	if [[ -r "$SUDO_HOME/.gnupg/pubring.gpg" ]]; then
+		install -D "$SUDO_HOME/.gnupg/pubring.gpg" "$copydir/build/.gnupg/pubring.gpg"
+	fi
 else
 	makepkg_conf="$HOME/.makepkg.conf"
+	if [[ -r "$HOME/.gnupg/pubring.gpg" ]]; then
+		install -D "$HOME/.gnupg/pubring.gpg" "$copydir/build/.gnupg/pubring.gpg"
+	fi
 fi
 
 # Get SRC/PKGDEST from makepkg.conf
@@ -207,12 +213,12 @@ if ! grep -q 'SRCDEST="/srcdest"' "$copydir/etc/makepkg.conf"; then
 	echo 'SRCDEST="/srcdest"' >> "$copydir/etc/makepkg.conf"
 fi
 
-if [[ -n $MAKEFLAGS ]]; then 
+if [[ -n $MAKEFLAGS ]]; then
 	sed -i '/^MAKEFLAGS=/d' "$copydir/etc/makepkg.conf"
 	echo "MAKEFLAGS='${MAKEFLAGS}'" >> "$copydir/etc/makepkg.conf"
 fi
 
-if [[ -n $PACKAGER ]]; then 
+if [[ -n $PACKAGER ]]; then
 	sed -i '/^PACKAGER=/d' "$copydir/etc/makepkg.conf"
 	echo "PACKAGER='${PACKAGER}'" >> "$copydir/etc/makepkg.conf"
 fi
@@ -236,25 +242,28 @@ cp PKGBUILD "$copydir/build/"
 	done
 
 	# Find all changelog and install files, even inside functions
-	for i in changelog install; do
-		sed -n "s/^[[:space:]]*$i=//p" PKGBUILD | while IFS= read -r file; do
+	for i in 'changelog' 'install'; do
+		while read -r file; do
 			# evaluate any bash variables used
-			eval file="$file"
+			eval file=\"$(sed 's/^\(['\''"]\)\(.*\)\1$/\2/' <<< "$file")\"
 			[[ -f $file ]] && cp "$file" "$copydir/build/"
-		done
+		done < <(sed -n "s/^[[:space:]]*$i=//p" PKGBUILD)
 	done
 )
 
 chown -R nobody "$copydir"/{build,pkgdest,srcdest}
 
-echo 'nobody ALL = NOPASSWD: /usr/bin/pacman' > "$copydir/etc/sudoers.d/nobody-pacman"
+cat > "$copydir/etc/sudoers.d/nobody-pacman" <<EOF
+Defaults env_keep += "HOME"
+nobody ALL = NOPASSWD: /usr/bin/pacman
+EOF
 chmod 440 "$copydir/etc/sudoers.d/nobody-pacman"
 
 # This is a little gross, but this way the script is recreated every time in the
 # working copy
 cat >"$copydir/chrootbuild" <<EOF
 #!/bin/bash
-export LANG=C
+. /etc/profile
 export HOME=/build
 
 cd /build
@@ -264,7 +273,10 @@ sudo -u nobody makepkg $makepkg_args || touch BUILD_FAILED
 
 if $run_namcap; then
 	pacman -S --needed --noconfirm namcap
-	namcap /build/PKGBUILD /pkgdest/*.pkg.tar.?z > /build/namcap.log
+	for pkgfile in /build/PKGBUILD /pkgdest/*.pkg.tar.?z; do
+		echo "Checking \${pkgfile##*/}"
+		sudo -u nobody namcap "\$pkgfile" 2>&1 | tee "/build/\${pkgfile##*/}-namcap.log"
+	done
 fi
 
 exit 0
@@ -272,7 +284,7 @@ EOF
 chmod +x "$copydir/chrootbuild"
 
 if mkarchroot -r "/chrootbuild" "$copydir"; then
-	for pkgfile in "$copydir"/pkgdest/*.pkg.tar.*; do
+	for pkgfile in "$copydir"/pkgdest/*.pkg.tar.?z; do
 		if $add_to_db; then
 			mkdir -p "$copydir/repo"
 			pushd "$copydir/repo" >/dev/null
@@ -281,10 +293,12 @@ if mkarchroot -r "/chrootbuild" "$copydir"; then
 			popd >/dev/null
 		fi
 
+		chown "$src_owner" "$pkgfile"
 		mv "$pkgfile" "$PKGDEST"
 	done
 
-	for l in "$copydir"/build/{namcap,*-{build,check,package,package_*}}.log; do
+	for l in "$copydir"/build/*-{build,check,namcap,package,package_*}.log; do
+		chown "$src_owner" "$l"
 		[[ -f $l ]] && mv "$l" .
 	done
 else
@@ -293,11 +307,11 @@ else
 fi
 
 for f in "$copydir"/srcdest/*; do
+	chown "$src_owner" "$f"
 	mv "$f" "$SRCDEST"
 done
 
 if [[ -e $copydir/build/BUILD_FAILED ]]; then
-	echo "Build failed, check $copydir/build"
 	rm "$copydir/build/BUILD_FAILED"
-	exit 1
+	die "Build failed, check $copydir/build"
 fi

makepkg-i686.conf

@@ -31,7 +31,7 @@ CHOST="i686-pc-linux-gnu"
 # -mtune optimizes for an architecture, but builds for whole processor family
 CFLAGS="-march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
 CXXFLAGS="-march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
-LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu"
+LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
 #-- Make Flags: change this for DistCC/SMP systems
 #MAKEFLAGS="-j2"
 

makepkg-x86_64.conf

@@ -31,7 +31,7 @@ CHOST="x86_64-unknown-linux-gnu"
 # -mtune optimizes for an architecture, but builds for whole processor family
 CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
 CXXFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
-LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu"
+LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
 #-- Make Flags: change this for DistCC/SMP systems
 #MAKEFLAGS="-j2"
 

mkarchroot.in

@@ -8,6 +8,10 @@
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 # GNU General Public License for more details.
 
+m4_include(lib/common.sh)
+
+CHROOT_VERSION='v2'
+
 FORCE='n'
 RUN=''
 NOCOPY='n'
@@ -26,9 +30,9 @@ usage() {
 	echo '    -C <file>     Location of a pacman config file'
 	echo '    -M <file>     Location of a makepkg config file'
 	echo '    -n            Do not copy config files into the chroot'
-	echo '    -c <dir>      Set pacman cache. Default: /var/cache/pacman/pkg'
+	echo '    -c <dir>      Set pacman cache'
 	echo '    -h            This message'
-	exit $1
+	exit 1
 }
 
 while getopts 'r:ufnhC:M:c:' arg; do
@@ -41,191 +45,230 @@ while getopts 'r:ufnhC:M:c:' arg; do
 		n) NOCOPY='y' ;;
 		c) cache_dir="$OPTARG" ;;
 		h|?) usage 0 ;;
-		*) echo "invalid argument '${arg}'"; usage 1 ;;
+		*) error "invalid argument '${arg}'"; usage ;;
 	esac
 done
 
-if [ "$EUID" != '0' ]; then
-	echo 'error: this script must be run as root.'
-	exit 1
+if (( $EUID != 0 )); then
+	die 'This script must be run as root.'
 fi
 
 shift $(($OPTIND - 1))
 
-if [ "$RUN" = '' -a $# -lt 2 ]; then
-	echo 'you must specify a directory and one or more packages'
-	usage 1
-elif [ $# -lt 1 ]; then
-	echo 'you must specify a directory'
-	usage 1
+if [[ -z $RUN ]] && (( $# < 2 )); then
+	die 'You must specify a directory and one or more packages.'
+elif (( $# < 1 )); then
+	die 'You must specify a directory.'
 fi
 
 working_dir="$(readlink -f ${1})"
 shift 1
 
-[ "${working_dir}" = '' ] && echo 'error: please specify a working directory' && usage 1
+[[ -z $working_dir ]] && die 'Please specify a working directory.'
 
-if [ -z "$cache_dir" ]; then
-	cache_conf=${working_dir}/etc/pacman.conf
-	[ ! -f $cache_conf ] && cache_conf=${pac_conf:-/etc/pacman.conf}
-	cache_dir=$( (grep -m 1 '^CacheDir' $cache_conf || echo 'CacheDir = /var/cache/pacman/pkg') | sed 's/CacheDir\s*=\s*//')
-	unset cache_conf
+if [[ -z $cache_dir ]]; then
+	cache_dirs=($(pacman -v $cache_conf 2>&1 | grep '^Cache Dirs:' | sed 's/Cache Dirs:\s*//g'))
+else
+	cache_dirs=(${cache_dir})
 fi
 
-if [ -f /etc/pacman.d/mirrorlist ]; then
-	host_mirror=$(pacman -Sddp extra/devtools 2>/dev/null | sed -E 's#(.*/)extra/os/.*#\1$repo/os/$arch#')
-fi
-if [ -z "${host_mirror}" ]; then
-	host_mirror='http://mirrors.kernel.org/archlinux/$repo/os/$arch'
-fi
+host_mirror=$(pacman -Sddp extra/devtools 2>/dev/null | sed -E 's#(.*/)extra/os/.*#\1$repo/os/$arch#')
 if echo "${host_mirror}" | grep -q 'file://'; then
 	host_mirror_path=$(echo "${host_mirror}" | sed -E 's#file://(/.*)/\$repo/os/\$arch#\1#g')
 fi
 
 # {{{ functions
-chroot_mount() {
-	[ -e "${working_dir}/sys" ] || mkdir "${working_dir}/sys"
-	mount -t sysfs sysfs "${working_dir}/sys"
+bind_mount() {
+	local mode="${2:-rw}"
+	local target="${working_dir}${1}"
 
-	[ -e "${working_dir}/proc" ] || mkdir "${working_dir}/proc"
-	mount -t proc proc "${working_dir}/proc"
-
-	[ -e "${working_dir}/dev" ] || mkdir "${working_dir}/dev"
-	mount -t tmpfs dev "${working_dir}/dev" -o mode=0755,size=10M,nosuid
-	mknod -m 666 "${working_dir}/dev/null" c 1 3
-	mknod -m 666 "${working_dir}/dev/zero" c 1 5
-	mknod -m 600 "${working_dir}/dev/console" c 5 1
-	mknod -m 644 "${working_dir}/dev/random" c 1 8
-	mknod -m 644 "${working_dir}/dev/urandom" c 1 9
-	mknod -m 666 "${working_dir}/dev/tty" c 5 0
-	mknod -m 666 "${working_dir}/dev/tty0" c 4 0
-	mknod -m 666 "${working_dir}/dev/full" c 1 7
-	ln -s /proc/kcore "${working_dir}/dev/core"
-	ln -s /proc/self/fd "${working_dir}/dev/fd"
-	ln -s /proc/self/fd/0 "${working_dir}/dev/stdin"
-	ln -s /proc/self/fd/1 "${working_dir}/dev/stdout"
-	ln -s /proc/self/fd/2 "${working_dir}/dev/stderr"
-
-	[ -e "${working_dir}/dev/shm" ] || mkdir "${working_dir}/dev/shm"
-	mount -t tmpfs shm "${working_dir}/dev/shm" -o nodev,nosuid,size=128M
-
-	[ -e "${working_dir}/dev/pts" ] || mkdir "${working_dir}/dev/pts"
-	mount -t devpts devpts "${working_dir}/dev/pts" -o newinstance,ptmxmode=666
-	ln -s pts/ptmx "${working_dir}/dev/ptmx"
-
-	[ -e "${cache_dir}" ] || mkdir -p "${cache_dir}"
-	[ -e "${working_dir}/${cache_dir}" ] || mkdir -p "${working_dir}/${cache_dir}"
-	mount -o bind "${cache_dir}" "${working_dir}/${cache_dir}"
-
-	if [ -n "${host_mirror_path}" ]; then
-		[ -e "${working_dir}/${host_mirror_path}" ] || mkdir -p "${working_dir}/${host_mirror_path}"
-		mount -o bind "${host_mirror_path}" "${working_dir}/${host_mirror_path}"
-		mount -o remount,ro,bind "${host_mirror_path}" "${working_dir}/${host_mirror_path}"
+	if [[ ! -e "$target" ]]; then
+		if [[ -d "$1" ]]; then
+			install -d "$target"
+		else
+			install -D /dev/null "$target"
+		fi
 	fi
 
-	trap 'chroot_umount' EXIT INT QUIT TERM HUP
+	mount -o bind "$1" "$target"
+	mount -o remount,${mode},bind "$target"
+	mount --make-slave "$target"
+}
+
+chroot_mount() {
+	trap 'trap_chroot_umount' EXIT INT QUIT TERM HUP
+
+	if (( ! have_nspawn )); then
+		bind_mount /sys ro
+
+		[[ -e "${working_dir}/proc" ]] || mkdir "${working_dir}/proc"
+		mount -t proc proc -o nosuid,noexec,nodev "${working_dir}/proc"
+		bind_mount /proc/sys ro
+
+		[[ -e "${working_dir}/dev" ]] || mkdir "${working_dir}/dev"
+		mount -t tmpfs dev "${working_dir}/dev" -o mode=0755,size=10M,nosuid,strictatime
+		mknod -m 666 "${working_dir}/dev/null" c 1 3
+		mknod -m 666 "${working_dir}/dev/zero" c 1 5
+		mknod -m 600 "${working_dir}/dev/console" c 5 1
+		mknod -m 644 "${working_dir}/dev/random" c 1 8
+		mknod -m 644 "${working_dir}/dev/urandom" c 1 9
+		mknod -m 666 "${working_dir}/dev/tty" c 5 0
+		mknod -m 666 "${working_dir}/dev/ptmx" c 5 2
+		mknod -m 666 "${working_dir}/dev/tty0" c 4 0
+		mknod -m 666 "${working_dir}/dev/full" c 1 7
+		mknod -m 666 "${working_dir}/dev/rtc0" c 254 0
+		ln -s /proc/kcore "${working_dir}/dev/core"
+		ln -s /proc/self/fd "${working_dir}/dev/fd"
+		ln -s /proc/self/fd/0 "${working_dir}/dev/stdin"
+		ln -s /proc/self/fd/1 "${working_dir}/dev/stdout"
+		ln -s /proc/self/fd/2 "${working_dir}/dev/stderr"
+
+		[[ -e "${working_dir}/dev/shm" ]] || mkdir "${working_dir}/dev/shm"
+		mount -t tmpfs shm "${working_dir}/dev/shm" -o nodev,nosuid,size=128M
+
+		bind_mount /dev/pts
+
+		[[ -e "${working_dir}/run" ]] || mkdir "${working_dir}/run"
+		mount -t tmpfs tmpfs "${working_dir}/run" -o mode=0755,nodev,nosuid,strictatime,size=64M
+
+		for host_config in resolv.conf localtime; do
+			bind_mount /etc/$host_config ro
+		done
+	fi
+
+	[[ -n $host_mirror_path ]] && bind_mount "$host_mirror_path" ro
+
+	bind_mount "${cache_dirs[0]}"
+	for cache_dir in ${cache_dirs[@]:1}; do
+		bind_mount "$cache_dir" ro
+	done
 }
 
 copy_hostconf () {
-	chroot "${working_dir}" /bin/findmnt -rnu -o SOURCE,TARGET,FSTYPE,OPTIONS > "${working_dir}/etc/mtab"
-	cp /etc/resolv.conf "${working_dir}/etc/resolv.conf"
+	cp -a /etc/pacman.d/gnupg "${working_dir}/etc/pacman.d"
 	echo "Server = ${host_mirror}" > ${working_dir}/etc/pacman.d/mirrorlist
+
+	if [[ -n $pac_conf && $NOCOPY = 'n' ]]; then
+		cp ${pac_conf} ${working_dir}/etc/pacman.conf
+	fi
+
+	if [[ -n $makepkg_conf && $NOCOPY = 'n' ]]; then
+		cp ${makepkg_conf} ${working_dir}/etc/makepkg.conf
+	fi
+
+	sed -r "s|^#?\\s*CacheDir.+|CacheDir = $(echo -n ${cache_dirs[@]})|g" -i ${working_dir}/etc/pacman.conf
 }
 
-chroot_umount () {
-	umount "${working_dir}/proc"
-	umount "${working_dir}/sys"
-	umount "${working_dir}/dev/pts"
-	umount "${working_dir}/dev/shm"
-	umount "${working_dir}/dev"
-	umount "${working_dir}/${cache_dir}"
-	[ -n "${host_mirror_path}" ] && umount "${working_dir}/${host_mirror_path}"
+trap_chroot_umount () {
+	trap 'trap_abort' INT QUIT TERM HUP
+	trap 'trap_exit' EXIT
+
+	for cache_dir in ${cache_dirs[@]}; do
+		umount "${working_dir}/${cache_dir}"
+	done
+	[[ -n $host_mirror_path ]] && umount "${working_dir}/${host_mirror_path}"
+
+	if (( ! have_nspawn )); then
+		for host_config in resolv.conf localtime; do
+			umount "${working_dir}/etc/${host_config}"
+		done
+		umount "${working_dir}/proc/sys"
+		umount "${working_dir}/proc"
+		umount "${working_dir}/sys"
+		umount "${working_dir}/dev/pts"
+		umount "${working_dir}/dev/shm"
+		umount "${working_dir}/dev"
+		umount "${working_dir}/run"
+	fi
 }
 
 chroot_lock () {
 	# Only reopen the FD if it wasn't handed to us
-	if [ "$(readlink -f /dev/fd/9)" != "${working_dir}.lock" ]; then
+	if [[ $(readlink -f /dev/fd/9) != "${working_dir}.lock" ]]; then
 	  exec 9>"${working_dir}.lock"
 	fi
 
 	# Lock the chroot. Take note of the FD number.
 	if ! flock -n 9; then
-		echo -n "locking chroot..."
+		stat_busy "Locking chroot"
 		flock 9
-		echo "done"
+		stat_done
 	fi
 }
+
+chroot_run() {
+	local dir=$1
+	shift
+	if (( have_nspawn)); then
+		eval systemd-nspawn -D "${dir}" -- ${@} 2>/dev/null
+	else
+		eval unshare -mui -- chroot "${dir}" ${@}
+	fi
+}
+
 # }}}
 
+# use systemd-nspawn if we have it available and systemd is running
+if type -P systemd-nspawn >/dev/null && mountpoint -q /sys/fs/cgroup/systemd; then
+	have_nspawn=1
+fi
+
 umask 0022
-if [ "$RUN" != "" ]; then
+if [[ -n $RUN ]]; then
 	# run chroot {{{
 	#Sanity check
-	if [ ! -f "${working_dir}/.arch-chroot" ]; then
-		echo "error: '${working_dir}' does not appear to be a Arch chroot"
-		echo '       please build the image using mkarchroot'
-		exit 1
+	if [[ ! -f "${working_dir}/.arch-chroot" ]]; then
+		die "'${working_dir}' does not appear to be a Arch chroot."
+	elif [[ $(cat "${working_dir}/.arch-chroot") != ${CHROOT_VERSION} ]]; then
+		die "'${working_dir}' is not compatible with ${APPNAME} version ${CHROOT_VERSION}. Please rebuild."
 	fi
 
 	chroot_lock
 	chroot_mount
 	copy_hostconf
 
-	eval chroot "${working_dir}" ${RUN}
+	chroot_run "${working_dir}" ${RUN}
 
 	# }}}
 else
 	# {{{ build chroot
-	if [ -e "${working_dir}" -a "${FORCE}" = "n" ]; then
-		echo "error: working dir '${working_dir}' already exists - try using -f"
-		exit 1
+	if [[ -e $working_dir && $FORCE = 'n' ]]; then
+		die "Working directory '${working_dir}' already exists - try using -f"
 	fi
 
 	if { type -P btrfs && btrfs subvolume create "${working_dir}"; } &>/dev/null; then
 		chmod 0755 "${working_dir}"
 	fi
 
-	mkdir -p "${working_dir}/var/lib/pacman/sync"
-	mkdir -p "${working_dir}/etc/"
-
 	chroot_lock
 	chroot_mount
 
-	pacargs="--noconfirm --root=${working_dir} --cachedir=${cache_dir}"
-	if [ "$pac_conf" != "" ]; then
+	pacargs="${cache_dirs[@]/#/--cachedir=}"
+	if [[ -n $pac_conf ]]; then
 		pacargs="$pacargs --config=${pac_conf}"
 	fi
 
-	if [ $# -ne 0 ]; then
-		op='-Sy'
-		if [ "$FORCE" = "y" ]; then
-			op="${op}f"
+	if (( $# != 0 )); then
+		if [[ $FORCE = 'y' ]]; then
+			pacargs="$pacargs --force"
 		fi
-		if ! pacman ${op} ${pacargs} $@; then
-			echo 'error: failed to install all packages'
-			exit 1
+		if ! pacstrap -GMcd "${working_dir}" ${pacargs} $@; then
+			die 'Failed to install all packages'
 		fi
 	fi
 
-	if [ -d "${working_dir}/lib/modules" ]; then
-		ldconfig -r "${working_dir}"
+	if [[ -d "${working_dir}/lib/modules" ]]; then
+		chroot_run "${working_dir}" ldconfig
 	fi
 
-	if [ "$pac_conf" != "" -a "$NOCOPY" = "n" ]; then
-		cp ${pac_conf} ${working_dir}/etc/pacman.conf
-	fi
-
-	if [ "$makepkg_conf" != "" -a "$NOCOPY" = "n" ]; then
-		cp ${makepkg_conf} ${working_dir}/etc/makepkg.conf
-	fi
-
-	if [ -e "${working_dir}/etc/locale.gen" ]; then
+	if [[ -e "${working_dir}/etc/locale.gen" ]]; then
 		sed -i 's@^#\(en_US\|de_DE\)\(\.UTF-8\)@\1\2@' "${working_dir}/etc/locale.gen"
-		chroot "${working_dir}" /usr/sbin/locale-gen
+		chroot_run "${working_dir}" locale-gen
 	fi
+	echo 'LANG=C' > "${working_dir}/etc/locale.conf"
 
-	if [ ! -e "${working_dir}/.arch-chroot" ]; then
-		date +%s > "${working_dir}/.arch-chroot"
-	fi
+	copy_hostconf
+
+	echo "${CHROOT_VERSION}" > "${working_dir}/.arch-chroot"
 	# }}}
 fi

pacman-extra.conf

@@ -37,18 +37,13 @@ Architecture = auto
 #CheckSpace
 #VerbosePkgLists
 
-# PGP signature checking
-# NOTE: None of this will work without running `pacman-key --init` first.
-# The compiled in default is equivalent to the following line. This requires
-# you to locally sign and trust packager keys using `pacman-key` for them to be
-# considered valid.
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
 #SigLevel = Optional TrustedOnly
-# If you wish to check signatures but avoid local sign and trust issues, use
-# the following line. This will treat any key imported into pacman's keyring as
-# trusted.
-SigLevel = Optional TrustAll
-# Disable signature checks for now
-SigLevel = Never
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
 
 #
 # REPOSITORIES
@@ -74,18 +69,23 @@ SigLevel = Never
 # after the header, and they will be used before the default mirrors.
 
 #[testing]
+#SigLevel = PackageRequired
 #Include = /etc/pacman.d/mirrorlist
 
 [core]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 [extra]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 #[community-testing]
+#SigLevel = PackageRequired
 #Include = /etc/pacman.d/mirrorlist
 
 [community]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 # An example of a custom package repository.  See the pacman manpage for

pacman-gnome-unstable.conf

@@ -0,0 +1,100 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+HoldPkg     = pacman glibc
+# If upgrades are available for these packages they will be asked for first
+SyncFirst   = pacman
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+#UseDelta
+#TotalDownload
+# We cannot check disk space from within a chroot environment
+#CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+#SigLevel = Optional TrustedOnly
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+[gnome-unstable]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[testing]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[core]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[community-testing]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[community]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
+

pacman-kde-unstable.conf

@@ -0,0 +1,100 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+HoldPkg     = pacman glibc
+# If upgrades are available for these packages they will be asked for first
+SyncFirst   = pacman
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+#UseDelta
+#TotalDownload
+# We cannot check disk space from within a chroot environment
+#CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+#SigLevel = Optional TrustedOnly
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+[kde-unstable]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[testing]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[core]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[community-testing]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[community]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
+

pacman-multilib-staging.conf

@@ -0,0 +1,118 @@
+#
+# /etc/pacman.conf
+#
+# See the pacman.conf(5) manpage for option and repository directives
+
+#
+# GENERAL OPTIONS
+#
+[options]
+# The following paths are commented out with their default values listed.
+# If you wish to use different paths, uncomment and update the paths.
+#RootDir     = /
+#DBPath      = /var/lib/pacman/
+#CacheDir    = /var/cache/pacman/pkg/
+#LogFile     = /var/log/pacman.log
+#GPGDir      = /etc/pacman.d/gnupg/
+HoldPkg     = pacman glibc
+# If upgrades are available for these packages they will be asked for first
+SyncFirst   = pacman
+#XferCommand = /usr/bin/curl -C - -f %u > %o
+#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
+#CleanMethod = KeepInstalled
+Architecture = auto
+
+# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
+#IgnorePkg   =
+#IgnoreGroup =
+
+#NoUpgrade   =
+#NoExtract   =
+
+# Misc options
+#UseSyslog
+#UseDelta
+#TotalDownload
+# We cannot check disk space from within a chroot environment
+#CheckSpace
+#VerbosePkgLists
+
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
+#SigLevel = Optional TrustedOnly
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
+
+#
+# REPOSITORIES
+#   - can be defined here or included from another file
+#   - pacman will search repositories in the order defined here
+#   - local/custom mirrors can be added here or in separate files
+#   - repositories listed first will take precedence when packages
+#     have identical names, regardless of version number
+#   - URLs will have $repo replaced by the name of the current repo
+#   - URLs will have $arch replaced by the name of the architecture
+#
+# Repository entries are of the format:
+#       [repo-name]
+#       Server = ServerName
+#       Include = IncludePath
+#
+# The header [repo-name] is crucial - it must be present and
+# uncommented to enable the repo.
+#
+
+# The testing repositories are disabled by default. To enable, uncomment the
+# repo name header and Include lines. You can add preferred servers immediately
+# after the header, and they will be used before the default mirrors.
+
+[staging]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[testing]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[core]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[extra]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[community-staging]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[community-testing]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[community]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+# If you want to run 32 bit applications on your x86_64 system,
+# enable the multilib repositories as required here.
+[multilib-staging]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[multilib-testing]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+[multilib]
+SigLevel = PackageRequired
+Include = /etc/pacman.d/mirrorlist
+
+# An example of a custom package repository.  See the pacman manpage for
+# tips on creating your own repositories.
+#[custom]
+#SigLevel = Optional TrustAll
+#Server = file:///home/custompkgs
+

pacman-multilib-testing.conf

@@ -37,18 +37,13 @@ Architecture = auto
 #CheckSpace
 #VerbosePkgLists
 
-# PGP signature checking
-# NOTE: None of this will work without running `pacman-key --init` first.
-# The compiled in default is equivalent to the following line. This requires
-# you to locally sign and trust packager keys using `pacman-key` for them to be
-# considered valid.
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
 #SigLevel = Optional TrustedOnly
-# If you wish to check signatures but avoid local sign and trust issues, use
-# the following line. This will treat any key imported into pacman's keyring as
-# trusted.
-#SigLevel = Optional TrustAll
-# Disable signature checks for now
-SigLevel = Never
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
 
 #
 # REPOSITORIES
@@ -74,31 +69,38 @@ SigLevel = Never
 # after the header, and they will be used before the default mirrors.
 
 [testing]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 [core]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 [extra]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 [community-testing]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 [community]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 # If you want to run 32 bit applications on your x86_64 system,
-# enable the multilib repository here.
+# enable the multilib repositories as required here.
 [multilib-testing]
-#SigLevel = Optional TrustAll
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 [multilib]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]
+#SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
 

pacman-multilib.conf

@@ -37,18 +37,13 @@ Architecture = auto
 #CheckSpace
 #VerbosePkgLists
 
-# PGP signature checking
-# NOTE: None of this will work without running `pacman-key --init` first.
-# The compiled in default is equivalent to the following line. This requires
-# you to locally sign and trust packager keys using `pacman-key` for them to be
-# considered valid.
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
 #SigLevel = Optional TrustedOnly
-# If you wish to check signatures but avoid local sign and trust issues, use
-# the following line. This will treat any key imported into pacman's keyring as
-# trusted.
-#SigLevel = Optional TrustAll
-# Disable signature checks for now
-SigLevel = Never
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
 
 #
 # REPOSITORIES
@@ -74,28 +69,39 @@ SigLevel = Never
 # after the header, and they will be used before the default mirrors.
 
 #[testing]
+#SigLevel = PackageRequired
 #Include = /etc/pacman.d/mirrorlist
 
 [core]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 [extra]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 #[community-testing]
+#SigLevel = PackageRequired
 #Include = /etc/pacman.d/mirrorlist
 
 [community]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 # If you want to run 32 bit applications on your x86_64 system,
-# enable the multilib repository here.
+# enable the multilib repositories as required here.
+
+#[multilib-testing]
+#SigLevel = PackageRequired
+#Include = /etc/pacman.d/mirrorlist
+
 [multilib]
-#SigLevel = Optional TrustAll
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]
+#SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
 

pacman-staging.conf

@@ -37,18 +37,13 @@ Architecture = auto
 #CheckSpace
 #VerbosePkgLists
 
-# PGP signature checking
-# NOTE: None of this will work without running `pacman-key --init` first.
-# The compiled in default is equivalent to the following line. This requires
-# you to locally sign and trust packager keys using `pacman-key` for them to be
-# considered valid.
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
 #SigLevel = Optional TrustedOnly
-# If you wish to check signatures but avoid local sign and trust issues, use
-# the following line. This will treat any key imported into pacman's keyring as
-# trusted.
-#SigLevel = Optional TrustAll
-# Disable signature checks for now
-SigLevel = Never
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
 
 #
 # REPOSITORIES
@@ -74,29 +69,36 @@ SigLevel = Never
 # after the header, and they will be used before the default mirrors.
 
 [staging]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 [testing]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 [core]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 [extra]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 [community-staging]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 [community-testing]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
-#SigLevel = Optional TrustAll
 [community]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 # An example of a custom package repository.  See the pacman manpage for
 # tips on creating your own repositories.
 #[custom]
+#SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
 

pacman-testing.conf

@@ -37,18 +37,13 @@ Architecture = auto
 #CheckSpace
 #VerbosePkgLists
 
-# PGP signature checking
-# NOTE: None of this will work without running `pacman-key --init` first.
-# The compiled in default is equivalent to the following line. This requires
-# you to locally sign and trust packager keys using `pacman-key` for them to be
-# considered valid.
+# By default, pacman accepts packages signed by keys that its local keyring
+# trusts (see pacman-key and its man page), as well as unsigned packages.
 #SigLevel = Optional TrustedOnly
-# If you wish to check signatures but avoid local sign and trust issues, use
-# the following line. This will treat any key imported into pacman's keyring as
-# trusted.
-#SigLevel = Optional TrustAll
-# Disable signature checks for now
-SigLevel = Never
+
+# NOTE: You must run `pacman-key --init` before first using pacman; the local
+# keyring can then be populated with the keys of all official Arch Linux
+# packagers with `pacman-key --populate archlinux`.
 
 #
 # REPOSITORIES
@@ -74,18 +69,23 @@ SigLevel = Never
 # after the header, and they will be used before the default mirrors.
 
 [testing]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 [core]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 [extra]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 [community-testing]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 [community]
+SigLevel = PackageRequired
 Include = /etc/pacman.d/mirrorlist
 
 # An example of a custom package repository.  See the pacman manpage for

rebuildpkgs.in

@@ -9,25 +9,21 @@
 # Currently uses $(pwd)/rebuilds as the directory for rebuilding...
 # TODO make this work for community too
 
-if [ $# -le 1 ]; then
+m4_include(lib/common.sh)
+
+if (( $# < 1 )); then
 	echo "usage: $(basename $0) <chrootdir> <packages to rebuild>"
 	echo "  example: $(basename $0) ~/chroot readline bash foo bar baz"
 	exit 1
 fi
 
 # Source makepkg.conf; fail if it is not found
-if [ -r '/etc/makepkg.conf' ]; then
+if [[ -r '/etc/makepkg.conf' ]]; then
 	source '/etc/makepkg.conf'
 else
-	echo '/etc/makepkg.conf not found!'
-	exit 1
+	die '/etc/makepkg.conf not found!'
 fi
 
-die () {
-	echo $@ >&2
-	exit 1
-}
-
 bump_pkgrel() {
 	# Get the current pkgrel from SVN and update the working copy with it
 	# This prevents us from incrementing out of control :)
@@ -53,7 +49,7 @@ pkgs="$@"
 
 SVNPATH='svn+ssh://gerolde.archlinux.org/srv/svn-packages'
 
-echo ":: Work will be done in $(pwd)/rebuilds"
+msg "Work will be done in $(pwd)/rebuilds"
 
 REBUILD_ROOT="$(pwd)/rebuilds"
 mkdir -p "$REBUILD_ROOT"
@@ -65,11 +61,11 @@ FAILED=""
 for pkg in $pkgs; do
 	cd "$REBUILD_ROOT/svn-packages"
 
-	echo ":: Building '$pkg'"
+	msg2 "Building '$pkg'"
 	/usr/bin/svn update "$pkg"
-	if [ ! -d "$pkg/trunk" ]; then
+	if [[ ! -d "$pkg/trunk" ]]; then
 		FAILED="$FAILED $pkg"
-		echo ":: $pkg does not exist in SVN"
+		warning "$pkg does not exist in SVN"
 		continue
 	fi
 	cd "$pkg/trunk/"
@@ -78,24 +74,24 @@ for pkg in $pkgs; do
 
 	if ! sudo makechrootpkg -u -d -r "$chrootdir" -- --noconfirm; then
 		FAILED="$FAILED $pkg"
-		echo ":: $pkg Failed!"
+		error "$pkg Failed!"
 	else
 		pkgfile=$(pkg_from_pkgbuild)
-		if [ -e "$pkgfile" ]; then
-			echo ":: $pkg Complete"
+		if [[ -e $pkgfile ]]; then
+			msg2 "$pkg Complete"
 		else
 			FAILED="$FAILED $pkg"
-			echo ":: $pkg Failed, no package built!"
+			error "$pkg Failed, no package built!"
 		fi
 	fi
 done
 
 cd "$REBUILD_ROOT"
-if [ "$FAILED" != "" ]; then
-	echo 'Packages failed:'
+if [[ -n $FAILED ]]; then
+	msg 'Packages failed:'
 	for pkg in $FAILED; do
-		echo -e "\t$pkg"
+		msg2 "$pkg"
 	done
 fi
 
-echo 'SVN pkgbumps in svn-packages/ - commit when ready'
+msg 'SVN pkgbumps in svn-packages/ - commit when ready'

zsh_completion.in

@@ -1,18 +1,6 @@
-#compdef archbuild archco archrelease archrm commitpkg finddeps makechrootpkg mkarchroot rebuildpkgs extrapkg=commitpkg corepkg=commitpkg testingpkg=commitpkg stagingpkg=commitpkg communitypkg=commitpkg community-testingpkg=commitpkg community-stagingpkg=commitpkg multilibpkg=commitpkg multilib-testingpkg=commitpkg extra-i686-build=archbuild extra-x86_64-build=archbuild testing-i686-build=archbuild testing-x86_64-build=archbuild staging-i686-build=archbuild staging-x86_64-build=archbuild multilib-build=archbuild multilib-testing-build=archbuild communityco=archco
+#compdef archbuild archco archrelease archrm commitpkg finddeps makechrootpkg mkarchroot rebuildpkgs extrapkg=commitpkg corepkg=commitpkg testingpkg=commitpkg stagingpkg=commitpkg communitypkg=commitpkg community-testingpkg=commitpkg community-stagingpkg=commitpkg multilibpkg=commitpkg multilib-testingpkg=commitpkg extra-i686-build=archbuild extra-x86_64-build=archbuild testing-i686-build=archbuild testing-x86_64-build=archbuild staging-i686-build=archbuild staging-x86_64-build=archbuild multilib-build=archbuild multilib-testing-build=archbuild multilib-staging-build=archbuild kde-unstable-i686-build=archbuild kde-unstable-x86_64-build=archbuild gnome-unstable-i686-build=archbuild gnome-unstable-x86_64-build=archbuild communityco=archco
 
-_arch=(i686 x86_64 any)
-
-_tags=(
-	core-i686 core-x86_64 core-any
-	extra-i686 extra-x86_64 extra-any
-	multilib-i686 multilib-x86_64 multilib-any
-	staging-i686 staging-x86_64 staging-any
-	testing-i686 testing-x86_64 testing-any
-	multilib-testing-i686 multilib-testing-x86_64 multilib-testing-any
-	community-i686 community-x86_64 community-any
-	community-staging-i686 community-staging-x86_64 community-staging-any
-	community-testing-i686 community-testing-x86_64 community-testing-any
-)
+m4_include(lib/valid-tags.sh)
 
 _archbuild_args=(
 	'-c[Recreate the chroot before building]'