This is the new and improved, canonical sogrep command, now with a valid
license.
The previous version of sogrep had several issues and inefficiencies,
and ultimately wasn't really the finished project I wanted it to be. Due
to a mistake in communication, I was totally unaware it was in the
process of being merged at all, nor that there was a licensing issue, or
I would have recommended waiting for both further improvements, and a
declaration of license intent; nevertheless, here it is now, and I
formally give this over into the GPLv2+ domain.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Partition the Makefile targets to only clean configured files, and make
the configured files be a subset of the bin programs.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Introduce a README which describes where to send patches and how to
release a new version of devtools.
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
If makechrootpkg is called as non-root, the {SRC,SRCPKG,PKG,LOG}DEST,
MAKEFLAGS and PACKAGER environment variables are lost in the call to
check_root().
Add these to the passed keepenv list so that they are preserved instead.
make clean removes all .in converted files to a file without .in which
in the make clean step is removed. So running make clean will remove
sogrep since it's specified as BINPROGS. In the future this steps should
be removed for sogrep since it is a standalone script.
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
svn propset's where determined to be non-reproducible and therefore
where removed from svn. Don't introduce them when moving packages
between repos.
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
makechrootpkg's download_sources() leaves a stray directory if
"makepkg --verifysource" failed. We use "setup_workdir" instead
of "mktemp -d", because this ensures the correct garbage collection.
Signed-off-by: Erich Eckner <git@eckner.net>
Les us source makepkg.conf settings from the environemnt. This also includes
`GNUPGHOME` which is present in `makechrootpkg`, but not included in archbuild.
Signed-off-by: Morten Linderud <foxboron@archlinux.org>
makepkg 5.1 implements error codes, and 14 means that installing the
packages after they were built has failed. We don't care about this
error and would like makechrootpkg to succeed regardless, e.g. for split
packages that are mutually exclusive.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
chown support "$user:$group" but also "$user:" which infers $group
rather than leaving it as root. This looks up the group name in cases
where the default group is e.g. "users" and users do not get their own
unique groups.
It is much nicer to use a proper configuration parser to retrieve the
primary mirror, rather than clever hacks using undocumented APIs,
especially when their behavior as used then breaks in later releases.
Fortunately, pacutils exists now and pacconf handles this quite
elegantly. It has since been moved to pacman-git proper.
Check if pacman-conf from a new enough version of pacman exists and
fallback on pacconf from pacutils.
This reverts commit eb6b0e3f11.
This never worked, as pacman-git returns file urls from the cache anyway
and pacman stable doesn't have any problem at all. Having useless code
which makes people think the issue is solved when it really isn't, is
bloat, so remove it.
In pacman-git commit d8717a6a9666ec80c8645d190d6f9c7ab73084ac makepkg
started checking that the setuid/setgid bit could be removed on the
$BUILDDIR in order to prevent this propagating to the packages
themselves. Unfortunately, this requires the temporary builddir used
during the --verifysource stage of makepkg, to be owned by $makepkg_user
which was not the case as it is created as root using mktemp (and given
world rwx in addition to the restricted deletion bit.)
Obviously makepkg cannot chmod a directory that it does not own. Fix
this by making $makepkg_user the owner of that directory, as should have
been the case all along.
(Giving world rwx is illogical on general principle. The fact that this
is a workaround for makepkg demanding these directories be writable even
when they are not going to be used for the makepkg options in question,
is not justification for being careless.)
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Previously, makechrootpkg hardcoded ~/.gnupg. Therefore, if a user
uses a custom GPG home directory, the siganture checking would fail.
Now makechrootpkg uses $GNUPGHOME, with a fallback to ~/.gnupg.
Signed-off-by: Emiel Wiedijk <me@aimileus.nl>
Support for working with `set -u` was broken by 94160d6. Egg on my
face; I'm the one who wants `set -u` support, and I'm the author of
that commit!
libmakepkg does not work with `set -u`; but mostly because of the include
guards! So we just need to temporarily disable `set -u` (nounset) while
loading libmakepkg. Instead of introducing a new variable, just store the
initial nounset status in _INCLUDE_COMMON_SH; rather than a useless
fixed-string "true".
While we're at it, disable POSIX-mode (just in case we're running as "sh"
instead of "bash"), since libmakepkg uses bash-isms that won't parse in
POSIX mode.
Don't use error-prone logic e.g.
foo=true; if $foo ...
This completely fails to act as expected when the variable is unset
because of unrelated bugs.
While this merely causes the default behavior to be "false" rather than
"true" in such cases, it is better to fail to enable explicitly
requested behavior (which will be noticed by the user) than to simply
upgrade to this behavior for free (which may not seem to have any
obvious cause).
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Fixes regression in 2fd5931a8c
$run_namcap will always be set to ""
`if $not_a_var; then ...; fi` is always truthful when $not_a_var is
unset or equal to "" and the `then` clause will always be run.
I'm not sure why global state variables need to be cloned locally for
their sole explicit purpose.
But for now this patch implements the minimum necessary work to properly
pass the "do I want namcap" variable into prepare_chroot() according to
the current logic flow.
Note that I have still not thorougly tested makechrootpkg.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Recent development versions of makepkg support reproducible builds
through the environment variable SOURCE_DATE_EPOCH. Pass this variable
through makechrootpkg to makepkg when available.
Also initialize SOURCE_DATE_EPOCH whenever running archbuild to enforce
reproducible builds for repository packages.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Levente Polyak <anthraxx@archlinux.org>
A couple of the comments noting which globals are used by functions are
outdated/wrong.
- download_sources() : Remove USER from the list. It was always wrong.
Originally, it should have been SUDO_USER (not USER), but I should have
removed it entirely in 4f23609.
- move_products() : Add SRCPKGDEST to the list. Though the commit adding
the comment was only recently upstreamed (as 2fd5931), it originated in
2013 in a commit that has since been rebased many times. Anyway, in
this rebasing, it missed move_products() starting to pay attention to
SRCPKGDEST in fd1be1b (since nothing made git think there was a
"conflict").
The reason it wasn't moved before was just to keep the diffs
(with --ignore-all-space) smaller, to make merging and rebasing work
easier. Moving code around in a file tends to make that difficult.
But, readability wise, it belongs in main().
nspawn does not give us a controlling terminal, hence we ignore
interrupts. Apparently this was lost in systemd at some point.
Hack around this by reopening the console to make it the controlling
terminal.
Coredumps from build chroots are not generally useful. Prevent
them from being generated.
Avoids a lot of annoyance from the GCC testsuite spawning lots of
systemd-coredump processes.
Just set the soft limit so the user can still raise it in the PKGBUILD
if they insist.
systemd-nspawn use a default environ PATH value of:
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
Since filesystem 2017.08, this is no more overrided by /etc/profile
to the Arch default:
PATH=/usr/local/sbin:/usr/local/bin:/usr/bin
Commit 58968cf fixed symlinks for package products in $startdir in
light of the simplified chroot setup. However, a similar change needs
to be made for source-package products. This was an easy omission to
make because makechrootpkg does not produce source-pakcages by
default.
- Use `read -r` instead of other forms of read or looping
- Use arrays instead of strings with whitespaces.
- In one instance, use ${var%%.*} instead of $(echo $var|cut -f. -d1)
The bug isn't currently triggered, but I accidentally did trigger when I
was trying to modify the command a bit. I figure a "caution" sign would be
helpful to any future developers.
The default m4 quote characters: `QUOTE' are troublesome, because ` is
fairly likely to pop up in a shell script (if not for a subshell, because
it is a useful character in comments and user-facing messages).
So, this changes it to [[[QUOTE]]], as it is unlikely to see three braces
together like that, let alone in unbalanced sets.
What this is really doing is fixing a conflict that I had incorrectly
resolved when rebasing what became 2fd5931 onto cda9cf4. Of course,
because of dynamic scoping, everything worked out, and everything worked as
intended.
Before cda9cf4, it was appropriate for download_sources to take src_owner
as an argument, but after cda9cf4, it is now appropriate to take
makepkg_user as an argument. However, it still takes src_owner as an
argument, but pays 0 attention to it; instead looking at makepkg_user which
it happily inherited because of dynamic scoping.
So change it to take makepkg_user as the argument.
The `-xdev` flag to `find` makes it not recurse over subvolumes; so it only
supports recursion with depth=1. Fix this by having the function
recursively call itself.
This is inspired by the thought that went in to the delete_chroot
is_subvolume commit.
sync_chroot($chrootdir, $copydir) copies `$chrootdir/root` to `$copydir`.
That seems a little silly; why do we care about "$chrootdir"? Have it just
be sync_chroot(source, destination) like every other sync/copy command.
Where this becomes tricky is check to decide if we are going to use btrfs
subvolumes or not. We don't care if "$source/.." is on btrfs; the root
could be a directly-mounted subvolume, but and the destination could be
another subvolume of the same btrfs mounted somewhere else.
The things we do care about are:
- The source is a btrfs subvolume (so that we can snapshot it)
- The source is on the same filesystem as the directory that the copy will
be created in.
- If the destination exists:
* that it is not a mountpoint (so that we can delete and recreate it)
* that it is a btrfs subvolume (so that we can quickly delete it)
On the last point, it isn't necessary for creating the new snapshot, just
for quick deletion. That can be a separate check, where we use regular
`rm` for deleting the existing copy, but use subvolume snapshots for
creating the new one.
Also, shorten the "Synchronizing" message to only include the full path
to the copy if it was specified.
The capslocked variable names in the Usage comment were references to
things in Parabola's tools, that didn't make much sense here out of
context.
First of all, it ran `is_btrfs "$chrootdir"` to decide if it was on
btrfs, but $chrootdir wasn't defined locally; it just happens to work
because $chrootdir was defined in main(). (I noticed this because in
Parabola, it is called differently, so $chrootdir was empty).
So I was tempted to just change it to `is_btrfs "$copydir"`, but if
$copydir is just a regular directory on a btrfs filesystem, then it
It would leave much of $copydir intact. What we really care about is
if $copydir is a btrfs subvolume; which we can check by combining the
is_btrfs check with inspecting the inum of the directory.
I put this combined check in lib/archroot.sh:is_subvolume.
https://lists.archlinux.org/pipermail/arch-projects/2013-September/003901.html
This means wrapping variable initialization in init_variables(), and the
main program routine in main().
I did NOT put `shopt -s nullglob` in to a function.
It make make sense to move init_variables() down into the main()
function, instead of having it as a separate function up top (if this
done, then the `-g` flag passed to `declare` in init_variables() can
be dropped). However, in interest of keeping the `diff -w` small, and
merges/rebases simpler, this isn't done here.
A previous iteration of this change (libretools commit d7dcce53396d)
simply inserted `env -i` to clear the environment.
However, that lead to it ignoring proxy settings, which some users had
problems with:
https://labs.parabola.nu/issues/487:
> To fix other bugs, the pacstrap environment is blank, which also
> means that the proxy settings are blank.
So (in libretools commit d17d1d82349f), I changed it to use `declare
-x` to inspect the environment, and create a version of it only
consisting of variables ending with "_proxy" (case-insensitive).
I honestly don't remember what "other bugs" prompted me to clear the
environment in the first place.
In sync_chroot(), this makes the messages be a bit more precise with
exactly which thing they are syncing where. This is based on my users
expressing confusion at what is going on (especially when something is
taking a long time, and they have to blame something for blocking).
With these changes, I haven't gotten such confusion in a long time
(but maybe my users just got used to it).
In delete_chroot(), this changes "temporary copy" to "chroot copy",
since in Parabola's version of the tools, the function can get called
from other places, and it isn't necessarily operating on a temporary
copy.
This allows us to run an ARM chroot on an x86 box; as the binfmt
runner will set the architecture for us, and the x86
`/usr/bin/setarch` program won't know about the ARM architecture
string.
Even though main() doesn't call `set -u`; this way the functions will
continue to work if copied into an environment with `set -u`, or so
that we are ready if we ever want to start using `set -u`.
Rather than them simply being named blocks of code with braces around
them.
That is: have them take things via arguments rather than global
variables.
Specific notes:
- create_chroot->sync_chroot:
I pulled out locking the destination chroot; getting that lock is
now the caller's responsibility. It still handles locking the
source chroot though.
I pulled the `if [[ ! -d $copydir ]] || $clean_first;` check out; it is
now the caller's responsibility to use that check when deciding if to
call sync_chroot.
However, when pulling that check out, I left it as `if true;`, to
keep an indentation level. This patch has had to be rebased/merged
many times, and changing the indentation is a sure way to make that
go less smoothly; I'm not going to re-indent this block until I see
the check removed in the git.archlinux.org/devtools.git repository.
- install_packages:
1. Receive the list of packages as arguments, rather than a global
variable.
2. Make the caller responsible for looking at PKGBUILD. From the
name and arguments, one would never expect it to look at PKGBUILD.
This is similar to common C #ifdef guards.
I was tempted to wrap the entire thing in the if/fi, rather than use
'return' to bail early. However, that means it won't execute anything
until after it reaches 'fi'. And if `shopt -s extglob` isn't executed
before parsing, then it will syntax-error on the extended globs. One
solution would have been to move `shopt -s extglob` up above the
include-guard. But the committed solution is all-around simpler.
It was displaing the value of the `makepkg_args` variable, which may
have already been changed by the argument parsing by the time it gets
to `-h`. Now there is a separate `default_makepkg_args` variable.
This involves extending the signature of lib/common.sh's `stat_busy()`,
`lock()`, and `slock()`. The `mesg=$1; shift` in stat_busy even suggests
that this is what was originally intended from it.
In cases where there is no license specified, the file is tagged as
"License: Unspecified". Obviously, that is not ideal, but it
highlights the fact, and I hope that it encourages whoever has the
authority to specify the license to do so.
On that note, to anyone who may have the authority to specify the
license of files in devtools: the current licence of many files is
GPLv2 with no option for later versions; I impore you to re-license
them to have the "or any later version" option.
Allow for locks to be inherited. Inheriting the lock is something that
mkarchroot could do previously, but has since lost the ability to do. This
allows for the programs to be more compos-able.
Do this by instead of unconditionally opening $file on $fd, first check if
$file is already open on $fd; and go ahead use it if it is.
The naive way of doing this would be to `$(readlink /dev/fd/$fd)` and
compare that to `$file`. However, if `$file` is itself a symlink; or there
is a symlink somewhere in the path to `$file`, then this could easily fail.
Instead, check `[[ "/dev/fd/$fd" -ef "$file" ]]`. Even though the Bash
documentation (`help test`) says that `-ef` checks for if the two files are
hard links to eachother, because it uses stat(3) (which resolves symlinks)
to do this check, it also works with the /dev/fd/ soft links.
`lock_close FD` is easier to remember than 'exec FD>&-`; and is especially
easier if FD is a variable (though that isn't actually taken advantage of
here).
This uses Bash 4.1+ `exec {var}>&-`, rather than the clunkier
`eval exec "$var>&-"` that was necessary in older versions of Bash.
Thanks to Dave Reisner for pointing this new bit of syntax out to me
the last time I submitted this (back in 2014, 4.1 had just come out).
The systemd package creates a subvolume at /var/lib/machines (through
tmpfiles), if it can. We need to delete this subvolume before we can
delete the parent subvolume.
Look through the root for inodes with the number 256. These identify
subvolume roots.
The way in which makechrootpkg reads variables from makepkg.conf(5) is
different from makepkg, in that it reads a subset of defined
variables, and only if the were not set in the environment before.
Mention this in the usage text.
Fixes FS#44827
This removes the preservation of HOME being /build just for the pacman
sudo call. Former leads to unbuildable packages when an to be installed
dependency writes something into the HOME dir (f.e. .config). The
resulting directories won't be writable by the builduser as they are
owned by root:root and ultimately will fail to build anything that
requires so.
In order to have an UTF-8 locale in the build root. This is something
normally set on real machines but is not set from our chroots. Meson,
for example, loudly complains when the locale charset is not UTF-8.
I'd like to have C.UTF-8, as most other distributions do. Unfortunately,
it's not part of vanilla glibc; en_US.UTF-8 will have to do.
mkarchroot already creates roots with both en_US.UTF-8 and de_DE.UTF-8,
the latter because builds of gcc (perhaps used to) require it.
Bump the CHROOT_VERSION due to the setting change.
The gnustep-base package ships a profile.d script that adds
"$HOME/GNUstep/Tools" to the PATH, which breaks when the user changes
and causes meson to exit with a "permission denied" error.
Copy both UID and primary GID of the invoker to the builduser. Mount
srcdest and startdir read-write.
v2: Fixed GnuPG keyring owner and moved running namcap from a heredoc
to a function.
This way the HOME dir is writable and no ugly hacks are required
in the PKGBUILD if $HOME is accessed (f.e. maven, gradle and also
some python tests etc.)
This is needed in order to use GPG's auto-key-retrieve keyserver option,
otherwise the keyring will get copied to the chroot before the required
keys are retrieved during 'makepkg --verifysource'.
Chances are that pubring.kbx has been created by gpgsm but pubring.gpg
is still around with valid data. We do not know what file contains what
we need, so just copy both.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
bsdtar doesn't consider it an error when your --include doesn't match
anything in the archive, so we're forced to dump stderr to /dev/null
here.
Fixes: https://bugs.archlinux.org/task/42551
It tried to lock `$copydir.lock`, which was the ONLY mention of $copydir in
the entire file. Surely it meant `$copy.lock`; the line was probably
originally copy/pasted from makechrootpkg or similar, where $copydir is
used.
We run from a non-interactive shell, so the exec which is inevitably
called will replace the current process and 'die' will never run under
any circumstances.
This also fixes a bug with the su fallback which would cause multiple
arguments to be concatenated without any whitespace between them.
In collaborative builder machine, these scripts are often allowed to become root
via sudo. This patch avoid to prefix them by sudo each time or call su.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
If getopts comes across an unknown argument, $arg it set to '?' and
$OPTARG is unset. Therefore the getopts line detecting unknown arguments
doesn't work. Arguments to pass to makepkg are already handled by
passing all the aguments after the end-of-options marker (--), but this
wasn't documented in the usage text.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
If PKGDEST is set when makepkg was run, the package will be present in
find_cached_package's search path by default, causing an error.
This also fixes a display bug which causes no output to be shown when
multiple packages are found.
Fixes FS#37626.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
This function (currently) searches through $PWD and $PKGDEST looking
for a tarball matching the requested package name, architecture, and
pkgver. If found, it writes the full path to the located package to
stdout and returns 0, else 1. If more than 1 match is found, it's
treated as an error and the user will need to figure out what to do.
Use this in checkpkg and commitpkg, which previously implemented their
own less complete logic, to locate the build artifacts they rely on.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Instead of dying at the first sight of an unversioned file, this lets
commitpkg dump all known unversioned files at once.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
We shouldn't be in the business of reparsing makepkg's arguments, but
since we have to treat the case of repackaging separately, do a better
job of trying to find signs of it happening. This change lets you pass
the longopt, --repackage, or multiple shortopts such as -RA, and still
get the intended effect.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
The bsdtar options were in the incorrect order and objdump couldn't find the files.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Piggyback on systemd-nspawn's --bind and --bind-ro flags to allow
arbitrary mount points to be added to the build container.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
We can't rely on PKGEXT since it's not sourced from a controlled
location. Case in point, if a user sets PKGEXT=.pkg.tar.gz, checkpkg
fails and offers no easy workaround.
Instead, use glob expansion to resolve the name of the tarball, bailing
if it can't be found definitively. This involves some refactoring to
avoid modifying PWD (which is advisable regardless).
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
This fixes various errors one might encounter when trying to use a
build root or cachedir with whitespace in it.
Note that the cachedir fix is not a complete one, as pacman's output is
unreliable (and not meant for parsing here).
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
eval is no longer involved in the execution of systemd-nspawn, so we no
longer need a layer of escaping on the arguments.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
For example...
$ make
GEN checkpkg
GEN commitpkg
GEN archco
archco: line 179: unexpected EOF while looking for matching `"'
archco: line 181: syntax error: unexpected end of file
make: *** [archco] Error 2
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Now that die() properly forwards arguments to error(), we can expect
that the first arg is a format string and not the entirety of the
output.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Also allow this function to be called without arguments, in which case,
don't call error at all. Some uses of this function wrongly assumed
that this was already allowed.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
- Ensure sources are available before entering chroot
- Bind STARTDIR and SRCDEST into the chroot read-only
- Refactor makechrootpkg and introduce meaningful functions
Avoids copying stuff from/to the chroot as much as possible. With
VCS sources these copies can get quite expensive.
Reduces code duplication.
With makechrootpkg not calling mkarchroot anymore,
the lock handover protocol is unneeded.
arch-nspawn does not do any locking, so add protection to archbuild.
Separates the two features of mkarchroot. Provides users of the new
arch-nspawn with the full feature set of systemd-nspawn.
For example, this can be used to bind custom directories into the chroot.
Add option -T to build in a temporary chroot. This apply to any kind of
filesytem and allow to easily parrallelize builds.
This patch also simplify how $default_copy and $copy are defined.
Signed-off-by: Sébastien Luttringer <seblu@seblu.net>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
systemd-nspawn is capable of doing this as of systemd-198. Doing this
means we can remove all of our home grown chroot mount/umount logic, as
it's all performed by pacstrap or systemd-nspawn.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Move detection of chrootdir type after have check if the directory exists.
This avoid the following messages when -r is not given
stat: cannot read file system information for '': No such file or directory
Signed-off-by: Sébastien Luttringer <seblu@seblu.net>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Enable btrfs features only if the underlying filesystem is btrfs and not rely
on the presence of the btrfs tools.
Signed-off-by: Sébastien Luttringer <seblu@seblu.net>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Since commit cb3a6ce, running makechroot 2 times to insert a package in a build
directory require to find a directory without PKGBUILD
cd /var/empty
makechrootpkg -cu -I virtualbox-host-dkms-*-i686.pkg.tar.xz -r <dir>
makechrootpkg -I virtualbox-host-dkms-*-i686.pkg.tar.xz -r <dir>
cd -
makechrootpkg -n -r <dir>
This patch allow makechrootpkg to handle more than one package to be installed
before the build is run and simplify the previous case in
makechrootpkg -ncu -I virtualbox-host-dkms-*-i686.pkg.tar.xz -I virtualbox-guest-dkms-*-i686.pkg.tar.xz -r <dir>
Signed-off-by: Sébastien Luttringer <seblu@seblu.net>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
This allow to build in one shot a package depending of a missing package
Signed-off-by: Sébastien Luttringer <seblu@seblu.net>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
This will allow, by example, to easily build a package with a custom pkg.
staging-x86_64-build -- -cI /var/cache/pacman/pkg/ldoc-1.2.0-1-any.pkg.tar.xz
staging-x86_64-build -- -n
Signed-off-by: Sébastien Luttringer <seblu@seblu.net>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
The usage messages now begins with a "Usage:", i.e. capitalized and with a colon. Fixes FS#26956.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Stop trap_exit from forcing a 0 exit code. This fixes makechrootpkg,
which used to always return success, even if the build failed.
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
SVN treats '@' as a revision specifier, so with the addition of systemd
spawning service files, we need to ensure it doesn't screw things up.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
* If we are running systemd use nspawn instead of our own chroot setup
* Use pacstrap to setup our chroot environment
* Make sure the common trap is still called
* Bind resolve.conf, timezone and lcoaltime from the host if nspawn is not used
* Run ldconfig within the chroot
Previously files were always owned by nobody which means trying to write
to them directly would fail because only the owner has +w.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
With bash-completion 2.0, the completion must have the same name as the binary.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
* bind /sys and /dev/pts from host
* drop support for devtmpfs as it is no longer needed
* add /run and /dev/rtc0
* clone own ipc, uts and mount namespaces for chroot
* set localtime, timezone and locale within chroot environment
* copy /etc/pacman.d/gnupg from host
We need /dev/ptmx -> /dev/pts/ptmx (for devpts -o newinstance)
Other way to do this thing is via bind mount (as said kernel doc[devpts.txt]).
This should be done in this way at least for /dev as devtmpfs in the chroot.
Since we can not touch /dev (devtmpfs), because devtmpfs is "singleton",
just use bind method and avoid interference.
Do it the same for both modes of /dev (tmpfs) and (devtmpfs) to keep it simple.
Currently devpts in chroot is not working without this when using /dev as devtmpfs,
this fixes this issue (opening /dev/ptmx, creates devices nodes on outside /dev/pts)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
The "@" sign in file names in SVN marks the beginning of a pegged
version number -- from the Subversion book:
Peg revisions are specified to the Subversion command-line client
using at syntax, so called because the syntax involves appending an
“at sign” (@) and the peg revision to the end of the path with which
the revision is associated.
The trivial workaround is to always append an at sign to the end of the
path in the version control checks.
Before:
$ community-stagingpkg 'Add systemd units.'
==> ERROR: exim-submission@.service is not under version control
$ svn status -v | grep 'exim-submission@.service'
A - ? ? exim-submission@.service
After:
$ community-stagingpkg 'Add systemd units.'
==> Committing changes to trunk...done
==> Signing package exim-4.80-2-x86_64.pkg.tar.xz...
[...]
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
The main intention of this patch is to take advantage of
/dev/loop-control and loop devices.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
libperl.so results in soname="libperl.so.so" which is wrong.
This returns the correct string: "libperl.so"
Fix-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
We do not allow packages to be uploaded without signatures so force
all unsigned packages to be signed. This has the bonus of not
breaking makepkg signing support by requiring you use an internal
makepkg variable.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Compare every single tag with a list of valid tags. This prevents broken
releases which occurred whenever someone made a typo on the command
line:
$ ./archrelease community i686
==> ERROR: archrelease: Invalid tag: "community" (use -f to force release)
Since the list is used in the ZSH completion as well, break it out to a
separate file and move it to "lib/". Also, add a command line parameter
to allow for releasing to an unknown repository when necessary.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
These tags make no sense. Remove them from our valid tag array that is
used for tab completion.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
This fixes a problem where rsync won't work if the pkgver contains a
colon (epoch). In this case rsync assumes that the colon is a
remote:path separator and having src and dest both being remote
arguments is not supported.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Passing a directory that does not exist to makechrootpkg results in
an error message:
==> ERROR: No chroot dir defined, or invalid path ''
The path is not being printed as the readlink command blanks it if
the directory does not exist. Fix this.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
In the case of a .pkg.tar.xz and a .pkg.tar.gz existing in the same
directory, all commitpkg would say is:
==> WARNING: Could not find . Skipping x86_64
Upon digging into the logic, we did a few things poorly, mostly in
getpkgfile:
- getpkgfile tried to die in a subshell (within the command substituion
assignment to 'pkgfile'). This will never work.
- We assumed that proper glob expansion happened when we received
exactly 1 arg. This isn't necessarily true without nullglob in effect.
- We dumped the real error (spewed by getpkgfile) to /dev/null.
- We checked for the package twice in both $PWD and $DESTDIR/.
- We checked for file existance multiple times.
Address this by:
- not hiding errors. revamp the wording a little bit to make it more
obvious why we failed, particularly in the case of a glob expanding to
more than 1 file. Logic here is simplified to pointing out the failure
cases of 0 and >1.
- setting nullglob so the number of arguments passed into getpkgfile is
meaningful from a 'did it decisively resolve' point of view.
- not trying to exit the entire script from a subshell. Just return a
value (and use it).
- avoiding the package file existance check afterwards. this is a
freebie from getpkgfile when the glob passed fails to expand.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
As of filesystem-2011.12 this is not needed anylonger, and indeed blocks the
chroot from being upgraded. As a workaround, recreating the chroot fixes the
problem.
Fixes FS#27640.
Reported-by: Andrea Scarpino <andrea@archlinux.org>
Signed-off-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
This fixes a compound command such as the one below from continuing even
if the first fails.
extra-x86_64-build && extra-i686-build
The problem is that 'cleanup 0' is triggered in archbuild even after an
unsucessful call to makechrootpkg. Since both archbuild and
makechrootpkg share the exact same cleanup function (from lib/common),
we simply force the shell to exit with the true return value by exec'ing
the call to makechrootpkg.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
This ensures the PATH used when building is the default path and
not the value set by the user calling makechrootpkg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
This one fixes all the "Permission denied" errors we got when invoking
make(1) after modifying a source file and removes the need to delete the
generated scripts manually.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
We already fixed a couple of these in previous patches - this one should
replace all remaining uses of single brackets ("[") by double brackets.
Also, use arithmetic evaluation instead of conditional expressions where
appropriate and make use of "-z" and "-n" instead of comparing variables
to empty strings.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
repack is defined as a boolean. set it true when -R is passed
/usr/sbin/makechrootpkg: line 295: 1: command not found
Signed-off-by: Ionut Biru <ibiru@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Move the message template before the if block. We moved this to the else
branch in commit aaa68e49e8 which lead to
"msgtemplate" being unset if one specifies a commit message on the
command line, thus stripping the "upgpkg:" part.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Add "lib/common.sh" to the build dependencies of our scripts to ensure
everything gets rebuilt when we modify a common function. Also, add
"Makefile" itself to enforce a rebuild if the edit command changes.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
* Honor TMPDIR variable (just like we did in commit a0c6bf45).
* Quote path properly.
* Avoid unnecessary use of basename(1).
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Some of the output/error messages were capitalized, some were
not. This patch capitalize everything for consistency sake. Other
minor changes were done to the messages like removing the superfluous
"error:" from die messages and adding a final period to messages that
were complete sentences as appropriate.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
makepkg(8) currently uses a smarter method to extract all changelog and
install files from a PKGBUILD. Sync commitpkg to use the same code (with
small modifications). This also adds support for changelog/install files
that contain a whitespace.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Replace all mktemp(1) invocations that hardcode "/tmp" with `mktemp
--tmpdir` and change templates accordingly.
Note that "--tmpdir" is GNU-ish which is okay given that we currently
support Arch Linux only anyway.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
The optdepends array should be unset before sourcing the PKGBUILD to avoid
dangling optional depends.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Using parameter substitution might result in unpredictable behaviour
when directories contain whitespaces here. The read shell builtin is the
proper way to read single lines.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Source the PKGBUILD using the correct path (relative to our base
directory) instead of using cd(1) to switch to the ABS base directory
first and to the package directory afterwards.
This is very useful when trying to track errors, also:
$ ~/src/devtools/finddeps libdaq
./community/snort (depends)
PKGBUILD: line 17: ruby: command not found
PKGBUILD: line 19: [: =: unary operator expected
Versus:
$ ~/src/devtools/finddeps libdaq
./community/snort (depends)
./community/ruby-pkgconfig/PKGBUILD: line 17: ruby: command not found
./community/lmms/PKGBUILD: line 19: [: =: unary operator expected
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
If trash is empty, `svn rm -q "${trash[@]}"` fails with:
svn: Try 'svn help' for more info and then
svn: Not enough arguments provided
This doesn't result in any further malfunction but is kind of confusing
and unexpected. Skipping `svn rm` on an empty trash fixes this.
Reported-by: Alexander Rødseth <rodseth@gmail.com>
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
It is very helpful to always log the build output in makechrootpkg
so pass "-L" as a standard option to makepkg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
We don't need to invoke svn copy on each file; it accepts multiple
arguments. This cut Allan's time releasing one patch-friendly package
from 5 minutes to 2 minutes.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Installs namcap if needed, *after* building the package,
contrary to the former way of having to have namcap installed,
e.g. via makedepends.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Use nullglob instead of checking for existence. If the glob doesn't
match any files, it will be removed instead of staying unexpanded.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
This build system overhaul allows for adding (define-style) macros to
our scripts. All source files are now suffixed with ".in" to clarify
that they might contain unprocessed defines. The Makefile provides a new
rule to preprocess source files and generate proper output scripts.
Also, add a "@pkgdatadir@" define (as used in GNU Autotools) and use it
instead of hardcoded paths to "/usr/share/devtools" everywhere. We
missed this when adding PREFIX support to the build system in commit
35fc83ce7d.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Make use of _devtools_completions_all_packages() instead of using
_devtools_completions_installed_packages(). The latter was removed
during an earlier review of the patch adding ZSH completion (now
6350ec04 in master) but we forgot to change two references.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
No need to do this after we already wrote the package list to a file.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
The read shell builtin is the proper way to read single lines. Also,
simplify grep(1) and awk(1) invocations and use a single awk(1)
expression, that supports extracting file names with spaces, instead.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
We already use `pacman -Sddp` here which should always only return a
single package URL for regular packages. No need to extract the first
field of the last line. Also, specify "--print-format '%l'" explicitly
to make this consistent even if pacman(8)'s default value changes some
day.
Use bash parameter expansion instead of sed(1) to extract the file name
from the URL.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Do not hardcode the name of the package trunk directory and accept
varying directory names, such as "gnome-unstable". Regression introduced
in 8384ad849d.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Currently, files that have just been added to trunk are not copied to
the repositories when invoking archrelease, as `svn ls` does not list
them if we don't `svn update` explicitly before. Use `svn ls -r HEAD` to
include everything from current HEAD. Fixes FS#25680.
Reported-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Make use of archrelease's multi-tag capability invoke it once instead of
re-launching it for for each individual tag.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
This allows for releasing to multiple repositories with a single commit:
----
$ archrelease community-{i686,x86_64}
copying trunk to community-i686...done
copying trunk to community-x86_64...done
releasing package...done
----
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Ensure we do not mess with version control if there are any
subdirectories in the package trunk.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Commit c51cc8d365 erroneously introduced a
tab character that is prepended to the body of each commit message. Fix
this by using C-style newline escape sequences which will avoid further
whitespace issues caused by re-indentation of code at this point.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Generate a message template when omitting the commit message (includes
the same subject line that is used if a commit message is specified).
Also, use two newlines to separate the subject line from the message
body as it looks much clearer that way.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Default to "/usr/local" which should be used if you want to build
devtools from sources and install without using a package manager.
Use `make PREFIX=/usr install` to install to "/usr" instead.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Fix the `svn rm` invocation when releasing to a repository that already
contains some files. `svn ls` only returns basenames, so we need to
prepend the path here.
Regression introduced in 8384ad849d.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
In addition to what we had before, this will also detect:
* Non-existent files.
* Files that are missing or scheduled for deletion.
* Ignored files.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Use bash patterns instead of using grep(1) to check if a source file
contains the string "://".
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
This relies on the fact that trunk/ never has any subdirectories, so we
can simply copy all the files in it to the relevant repos/xxx/ directory
after removing all existing files in that directory.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
I need this for archiso, instead of maintaining a private copy.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
A missing quote in a grep command was giving out false matches.
By moving the objdump command in the same echo statement as the
filename, we ensure that every library name are displayed on a line of
their own in case they don't have a SONAME defined in their
headers. That is the case for some plugin libraries.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Very easy thing to forget when creating a new package, but easy enough
to check for and add automatically.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
The old pacman -d flag is now -dd since commit 111e07d0be44b7.
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
All the packages in the Arch repo have been rebuilt to include the
architecture in their package names so this workaround is no longer
needed.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Use the default key from the gpg keyring to sign packages unless
GPGKEY is specified (either in makepkg.conf or as an environmental
variable).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Batch them up using a bash array and then pass them all to a single
invocation of rsync.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
This allows uploads to possibly be smaller if a similar file exists
nearby without the same name. Unlikely in most cases, but we might as
well take advantage if they do exist:
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
This gets rid of the ever-expanding conditional we had before and
replaces it with two case statements.
The first handles the command name. If it ends with 'pkg', we treat the
entire first part of the reponame, unless of course 'commitpkg' was
called directly. This allows one to add new symlinks such as
'gnome-unstablepkg'.
The second handles the server. Well-known repositories are listed and
passed to the appropriate server. All unusual repos are assumed to live
on gerolde and sent that direction.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Commit ad593b8b61 introduces
a problem when $PKGDEST is set and the package to transfer
has an absolute pathname. In this case there is no need
to add anything to have rsync work properly.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Arch only uses .gz and .xz packages so look for .pkg.tar.?z. This
prevents matching potential detached signature files.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Remove superfluous subshell code from version control checks in
commitpkg, making it exit properly if source files are not under version
control. Also, improve correctness of sed(1) commands and use fgrep(1)
instead of grep(1) where appropriate.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
This is a hint to rsync that the file is a path and not a remote module
in the case of a package with an epoch in the version.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
Remove superfluous subshell code from version control checks in
commitpkg, making it exit properly if source files are not under version
control. Also, improve correctness of sed(1) commands and use fgrep(1)
instead of grep(1) where appropriate.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
It is often useful to go back through build logs after building a
package and it is removed at the start of the next run anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
extracting the tarball was done from the wrong directory
Signed-off-by: Ionut Biru <ibiru@archlinux.org>
Signed-off-by: Pierre Schmitz <pierre@archlinux.de>
'-r[Create chroots in this directory]:base_dir:_files -/'
)
_archco_args=(
'*:packages:_devtools_completions_all_packages'
)
_arch_nspawn_args=(
'-C[Location of a pacman config file]:pacman_config:_files'
'-M[Location of a makepkg config file]:makepkg_config:_files'
'-c[Set pacman cache]:pacman_cache:_files -/'
'-h[Display usage]'
)
_archrelease_args=(
"*:arch:($_tags[*])"
)
_commitpkg_args=(
"-a[Release to a specific architecture only]:arch:($_arch[*])"
'-l[Set bandwidth limit]:limit'
'1:commit_msg'
)
_finddeps_args=(
'1:packages:_devtools_completions_all_packages'
)
_makechrootpkg_args=(
'-I[Install a package into the working copy]:target:_files -g "*.pkg.tar.*(.)"'
'-c[Clean the chroot before building]'
'-h[Display usage]'
'-l[The directory to use as the working copy]:copy_dir:_files -/'
'-r[The chroot dir to use]:chroot_dir:_files -/'
'-u[Update the working copy of the chroot before building]'
)
_mkarchroot_args=(
'-C[Location of a pacman config file]:pacman_config:_files'
'-M[Location of a makepkg config file]:makepkg_config:_files'
'-c[Set pacman cache]:pacman_cache:_files -/'
'-h[Display usage]'
)
_rebuildpkgs_args=(
'1:chroot_dir:_files -/'
'*:packages:_devtools_completions_all_packages'
)
_devtools_completions_all_packages() {
typeset -U packages
packages=($(_call_program packages pacman -Sql))
compadd - "${(@)packages}"
}
_devtools() {
local argname="_${service//-/_}_args[@]"
_arguments -s "${(P)argname}"
}
_devtools
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
