wip: version edit

This commit simply replaces the usage of `scp` with `rsync`
for faster file transfer.

Signed-off-by: Orhun Parmaksız <orhunparmaksiz@gmail.com>

Makefile

@@ -1,6 +1,6 @@
 SHELL=/bin/bash
 
-V=1.0.0
+V=1.1.1
 BUILDTOOLVER ?= $(V)
 
 PREFIX = /usr/local
@@ -16,6 +16,7 @@ LIBRARY_SRC = $(call rwildcard,src/lib,*.sh)
 LIBRARY = $(addprefix $(BUILDDIR)/,$(patsubst src/%,%,$(patsubst %.in,%,$(LIBRARY_SRC))))
 MAKEPKG_CONFIGS=$(wildcard config/makepkg/*)
 PACMAN_CONFIGS=$(wildcard config/pacman/*)
+GIT_CONFIGS = $(wildcard config/git/*)
 SETARCH_ALIASES = $(wildcard config/setarch-aliases.d/*)
 MANS = $(addprefix $(BUILDDIR)/,$(patsubst %.asciidoc,%,$(wildcard doc/man/*.asciidoc)))
 
@@ -97,9 +98,12 @@ $(BUILDDIR)/doc/man/%: doc/man/%.asciidoc doc/asciidoc.conf doc/man/include/foot
 	@a2x --no-xmllint --asciidoc-opts="-f doc/asciidoc.conf" -d manpage -f manpage --destination-dir=$(BUILDDIR)/doc/man -a pkgdatadir=$(DATADIR) $<
 
 conf:
-	@install -d $(BUILDDIR)/makepkg.conf.d $(BUILDDIR)/pacman.conf.d
+	@install -d $(BUILDDIR)/makepkg.conf.d
 	@cp -a $(MAKEPKG_CONFIGS) $(BUILDDIR)/makepkg.conf.d
+	@install -d $(BUILDDIR)/pacman.conf.d
 	@cp -a $(PACMAN_CONFIGS) $(BUILDDIR)/pacman.conf.d
+	@install -d $(BUILDDIR)/git.conf.d
+	@cp -a $(GIT_CONFIGS) $(BUILDDIR)/git.conf.d
 
 clean:
 	rm -rf $(BUILDDIR)
@@ -112,6 +116,7 @@ install: all
 	install -m0755 ${BINPROGS} $(DESTDIR)$(PREFIX)/bin
 	install -dm0755 $(DESTDIR)$(DATADIR)/lib
 	cp -ra $(BUILDDIR)/lib/* $(DESTDIR)$(DATADIR)/lib
+	cp -a $(BUILDDIR)/git.conf.d -t $(DESTDIR)$(DATADIR)
 	for conf in $(notdir $(MAKEPKG_CONFIGS)); do install -Dm0644 $(BUILDDIR)/makepkg.conf.d/$$conf $(DESTDIR)$(DATADIR)/makepkg.conf.d/$${conf##*/}; done
 	for conf in $(notdir $(PACMAN_CONFIGS)); do install -Dm0644 $(BUILDDIR)/pacman.conf.d/$$conf $(DESTDIR)$(DATADIR)/pacman.conf.d/$${conf##*/}; done
 	for a in ${SETARCH_ALIASES}; do install -m0644 $$a -t $(DESTDIR)$(DATADIR)/setarch-aliases.d; done
@@ -129,6 +134,7 @@ uninstall:
 	for f in $(notdir $(BINPROGS)); do rm -f $(DESTDIR)$(PREFIX)/bin/$$f; done
 	for f in $(notdir $(LIBRARY)); do rm -f $(DESTDIR)$(DATADIR)/lib/$$f; done
 	rm -rf $(DESTDIR)$(DATADIR)/lib
+	rm -rf $(DESTDIR)$(DATADIR)/git.conf.d
 	for conf in $(notdir $(MAKEPKG_CONFIGS)); do rm -f $(DESTDIR)$(DATADIR)/makepkg.conf.d/$${conf##*/}; done
 	for conf in $(notdir $(PACMAN_CONFIGS)); do rm -f $(DESTDIR)$(DATADIR)/pacman.conf.d/$${conf##*/}; done
 	for f in $(notdir $(SETARCH_ALIASES)); do rm -f $(DESTDIR)$(DATADIR)/setarch-aliases.d/$$f; done
@@ -145,19 +151,23 @@ uninstall:
 		$(DESTDIR)$(DATADIR)/pacman.conf.d \
 		$(DESTDIR)$(DATADIR)
 
-TODAY=$(shell date +"%Y%m%d")
 tag:
-	@sed -E "s|^V=[0-9]{8}|V=$(TODAY)|" -i Makefile
-	@git commit --gpg-sign --message "Version $(TODAY)" Makefile
-	@git tag --sign --message "Version $(TODAY)" $(TODAY)
+	git cliff --strip=all --unreleased
+	@echo "current version: v$(V)"
+	@read -r -p "tag version: v" VERSION && \
+	sed -E "s|^V=.+|V=$$VERSION|" -i Makefile && \
+	git commit --gpg-sign --message "chore(release): version v$$VERSION" Makefile && \
+	git tag --sign --message "Version v$$VERSION" v$$VERSION
+
+release: dist
+	git push --tags origin master
+	git cliff --version >/dev/null
+	GITLAB_HOST=gitlab.archlinux.org glab release create v$(V) devtools-$(V).tar.gz* --milestone v$(V) --notes-file <(git cliff --strip=all --latest)
 
 dist:
-	git archive --format=tar --prefix=devtools-$(V)/ $(V) | gzip > devtools-$(V).tar.gz
+	git archive --format=tar --prefix=devtools-$(V)/ v$(V) | gzip > devtools-$(V).tar.gz
 	gpg --detach-sign --use-agent devtools-$(V).tar.gz
 
-upload:
-	scp devtools-$(V).tar.gz devtools-$(V).tar.gz.sig repos.archlinux.org:/srv/ftp/other/devtools/
-
 check: $(BINPROGS_SRC) $(LIBRARY_SRC) contrib/completion/bash/devtools.in config/makepkg/x86_64.conf contrib/makepkg/PKGBUILD.proto
 	shellcheck $^
 

README.md

@@ -23,6 +23,34 @@ will automatically build the project and proxy all calls to the local build dire
 ./test/bin/pkgctl --help
 ```
 
+### Commit messages
+
+All commits must follow [conventional commits](https://www.conventionalcommits.org).
+
+The following groups are allowed:
+
+- chore
+- feat
+- fix
+- doc
+- perf
+- test
+
+To override the scope for the changelog entry use the `Component:` trailer.
+
+Example:
+
+```
+feat(db): yay mega cool feature
+
+Very long and useful description.
+
+Fixes #1
+Fixes #2
+
+Component: pkgctl db remove
+```
+
 ## Releasing
 
 1. bump the version in the Makefile
@@ -41,7 +69,9 @@ will automatically build the project and proxy all calls to the local build dire
 - bash
 - binutils
 - coreutils
+- curl
 - diffutils
+- fakeroot
 - findutils
 - grep
 - jq
@@ -57,6 +87,12 @@ will automatically build the project and proxy all calls to the local build dire
 - mercurial
 - subversion
 
+### Optional Dependencies
+
+- bat (pretty printing)
+- nvchecker (version checking)
+- pacman-contrib (--update-checksums options for pkgctl build)
+
 ### Development Dependencies
 
 - asciidoc

cliff.toml

@@ -0,0 +1,45 @@
+[changelog]
+header = "# Changelog\n\n"
+body = """
+{%- if version -%}
+    ## [{{ version | trim_start_matches(pat="v") }}] - {{ timestamp | date(format="%Y-%m-%d") }}
+{%- else -%}
+    ## [unreleased]
+{%- endif %}
+{% for group, commits in commits | group_by(attribute="group") %}
+    ### {{ group | upper_first }}
+    {% for commit in commits | sort(attribute="message") %}
+		- {% set component = commit.footers | filter(attribute="token", value="Component") | map(attribute="value") | join(sep=", ") %}
+		{%- if component %}{{ component }}: {% elif commit.scope %}{{ commit.scope }}: {% endif %}
+		{{- commit.message | upper_first }}
+		{%- if commit.breaking %} (breaking){% endif %}
+		{%- set fixes = commit.footers | filter(attribute="token", value="Fixes") %}
+		{%- for fix in fixes %}{% if fix.separator|trim == '#' %}{{ fix.separator }}{{ fix.value }}{% endif %}{% endfor %}
+    {%- endfor %}
+{% endfor %}
+
+"""
+footer = ""
+
+# remove the leading and trailing whitespaces from the template
+trim = true
+
+[git]
+# allow only conventional commits
+# https://www.conventionalcommits.org
+conventional_commits = true
+# regex for parsing and grouping commits
+commit_parsers = [
+    { message = "^chore\\(release\\): version", skip = true},
+    { message = "^feat", group = "Features"},
+    { message = "^fix", group = "Bug Fixes"},
+    { message = "^doc", group = "Documentation"},
+    { message = "^perf", group = "Performance"},
+    { message = "^test", group = "Testing"},
+    { message = "^chore", group = "Miscellaneous Tasks"},
+    { body = ".*security", group = "Security"},
+]
+# filter out the commits that are not matched by commit parsers
+filter_commits = false
+# regex for matching git tags
+tag_pattern = "^v[0-9]+\\.[0-9]+\\.[0-9]+.*"

config/git/template/hooks/applypatch-msg

@@ -0,0 +1 @@
+#!/bin/sh

config/git/template/hooks/commit-msg

@@ -0,0 +1 @@
+#!/bin/sh

config/git/template/hooks/post-applypatch

@@ -0,0 +1 @@
+#!/bin/sh

config/git/template/hooks/post-checkout

@@ -0,0 +1 @@
+#!/bin/sh

config/git/template/hooks/post-commit

@@ -0,0 +1 @@
+#!/bin/sh

config/git/template/hooks/post-merge

@@ -0,0 +1 @@
+#!/bin/sh

config/git/template/hooks/pre-applypatch

@@ -0,0 +1 @@
+#!/bin/sh

config/git/template/hooks/pre-commit

@@ -0,0 +1 @@
+#!/bin/sh

config/git/template/hooks/pre-merge-commit

@@ -0,0 +1 @@
+#!/bin/sh

config/git/template/hooks/pre-push

@@ -0,0 +1 @@
+#!/bin/sh

config/git/template/hooks/pre-rebase

@@ -0,0 +1 @@
+#!/bin/sh

config/git/template/hooks/prepare-commit-msg

@@ -0,0 +1 @@
+#!/bin/sh

config/git/template/info/exclude

@@ -0,0 +1,28 @@
+/pkg
+/src
+/*/
+!/keys/
+
+/*.log
+/*.tar.*
+/*.tar
+/*.tgz
+/*.zst
+/*.gz
+/*.xz
+/*.bz2
+/*.zip
+/*.xpi
+/*.jar
+/*.whl
+/*.war
+/*.deb
+/*.ttf
+/*.dat
+/*.iso
+/*.asc
+/*.sig
+/*.signature
+/*.sign
+/*.SHA256SUMS
+/*.sha256

config/makepkg/x86_64.conf

@@ -25,7 +25,7 @@ DLAGENTS=('file::/usr/bin/curl -qgC - -o %o %u'
 
 #-- The package required by makepkg to download VCS sources
 #  Format: 'protocol::package'
-VCSCLIENTS=('bzr::bzr'
+VCSCLIENTS=('bzr::breezy'
             'fossil::fossil'
             'git::git'
             'hg::mercurial'
@@ -41,10 +41,11 @@ CHOST="x86_64-pc-linux-gnu"
 #-- Compiler and Linker Flags
 #CPPFLAGS=""
 CFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt -fexceptions \
-        -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security \
+        -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security \
         -fstack-clash-protection -fcf-protection"
 CXXFLAGS="$CFLAGS -Wp,-D_GLIBCXX_ASSERTIONS"
-LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now"
+LDFLAGS="-Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now \
+         -Wl,-z,pack-relative-relocs"
 LTOFLAGS="-flto=auto"
 RUSTFLAGS=""
 #-- Make Flags: change this for DistCC/SMP systems

config/makepkg/x86_64_v3.conf

@@ -25,7 +25,7 @@ DLAGENTS=('file::/usr/bin/curl -qgC - -o %o %u'
 
 #-- The package required by makepkg to download VCS sources
 #  Format: 'protocol::package'
-VCSCLIENTS=('bzr::bzr'
+VCSCLIENTS=('bzr::breezy'
             'fossil::fossil'
             'git::git'
             'hg::mercurial'
@@ -41,10 +41,11 @@ CHOST="x86_64-pc-linux-gnu"
 #-- Compiler and Linker Flags
 #CPPFLAGS=""
 CFLAGS="-march=x86-64-v3 -mtune=generic -O2 -pipe -fno-plt -fexceptions \
-        -Wp,-D_FORTIFY_SOURCE=2 -Wformat -Werror=format-security \
+        -Wp,-D_FORTIFY_SOURCE=3 -Wformat -Werror=format-security \
         -fstack-clash-protection -fcf-protection"
 CXXFLAGS="$CFLAGS -Wp,-D_GLIBCXX_ASSERTIONS"
-LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,-z,now"
+LDFLAGS="-Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now \
+         -Wl,-z,pack-relative-relocs"
 LTOFLAGS="-flto=auto"
 RUSTFLAGS=""
 #-- Make Flags: change this for DistCC/SMP systems

contrib/completion/bash/devtools.in

@@ -3,12 +3,18 @@
 # SPDX-License-Identifier: GPL-3.0-or-later
 
 _DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+# shellcheck source=src/lib/valid-build-install.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-build-install.sh
 # shellcheck source=src/lib/valid-tags.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-tags.sh
 # shellcheck source=src/lib/valid-repos.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-repos.sh
+# shellcheck source=src/lib/valid-inspect.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-inspect.sh
+# shellcheck source=src/lib/valid-search.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-search.sh
 
-_binary_arch=${_arch[*]:0:-1}
+_binary_arch=${DEVTOOLS_VALID_ARCHES[*]:0:-1}
 _colors=(never always auto)
 
 
@@ -24,6 +30,7 @@ _makechrootpkg_args=(
 	-n
 	-T
 	-U
+	-x
 )
 _makechrootpkg_args_d_opts() { _filedir -d; }
 _makechrootpkg_args_D_opts() { _filedir -d; }
@@ -31,6 +38,7 @@ _makechrootpkg_args_r_opts() { _filedir -d; }
 _makechrootpkg_args_I_opts() { _filedir '*.pkg.tar.*'; }
 _makechrootpkg_args_l_opts() { _filedir -d; }
 _makechrootpkg_args_U_opts() { :; }
+_makechrootpkg_args_x_opts() { _devtools_completions_inspect; }
 _makechrootpkg() { __devtools_complete _makechrootpkg; }
 complete -F _makechrootpkg makechrootpkg
 
@@ -38,6 +46,7 @@ complete -F _makechrootpkg makechrootpkg
 _makerepropkg_args=(
 	-h
 	-d
+	-n
 	-c
 	-M
 )
@@ -128,12 +137,14 @@ complete -F _offload_build offload-build
 
 
 _pkgctl_cmds=(
+	aur
 	auth
 	build
 	db
 	diff
 	release
 	repo
+	search
 	version
 )
 _pkgctl_args=(
@@ -169,10 +180,14 @@ _pkgctl_build_args=(
 	-o --offload
 	-c --clean
 	-w --worker
+	--inspect
+	-I --install-to-chroot
+	-i --install-to-host
 
 	--pkgver
 	--pkgrel
 	--rebuild
+	--update-checksums
 	-e --edit
 
 	-r --release
@@ -185,11 +200,19 @@ _pkgctl_build_args__arch_opts() { _devtools_completions_arch; }
 _pkgctl_build_args__repo_opts() { _devtools_completions_repo; }
 _pkgctl_build_args__worker_opts() { :; }
 _pkgctl_build_args_w_opts() { _pkgctl_build_args__worker_opts; }
+_pkgctl_build_args__inspect_opts() { _devtools_completions_inspect; }
 _pkgctl_build_args__pkgver_opts() { :; }
 _pkgctl_build_args__pkgrel_opts() { :; }
+_pkgctl_build_args__install_to_host_opts() { _pkgctl_build_completions_install_mode; }
+_pkgctl_build_args_i_opts() { _pkgctl_build_args__install_to_host_opts; }
+_pkgctl_build_args__install_to_chroot_opts() { _makechrootpkg_args_I_opts; }
+_pkgctl_build_args_I_opts() { _pkgctl_build_args__install_to_chroot_opts; }
 _pkgctl_build_args__message_opts() { :; }
 _pkgctl_build_args_m_opts() { _pkgctl_build_args__message_opts; }
 _pkgctl_build_opts() { _filedir -d; }
+_pkgctl_build_completions_install_mode() {
+	mapfile -t COMPREPLY < <(compgen -W "${DEVTOOLS_VALID_BUILD_INSTALL[*]}" -- "$cur")
+}
 
 
 _pkgctl_db_cmds=(
@@ -253,6 +276,17 @@ _pkgctl_release_args__repo_opts() { _devtools_completions_repo; }
 _pkgctl_release_args_r_opts() { _pkgctl_release_args__repo_opts; }
 _pkgctl_release_opts() { _filedir -d; }
 
+_pkgctl_aur_cmds=(
+	drop-from-repo
+)
+
+_pkgctl_aur_drop_from_repo_args=(
+	--no-disown
+	-f --force
+	-h --help
+)
+_pkgctl_aur_drop_from_repo_opts() { _filedir -d; }
+
 
 _pkgctl_repo_cmds=(
 	clone
@@ -265,6 +299,7 @@ _pkgctl_repo_cmds=(
 
 _pkgctl_repo_clone_args=(
 	-m --maintainer
+	--protocol
 	--switch
 	-u --unprivileged
 	--universe
@@ -273,6 +308,7 @@ _pkgctl_repo_clone_args=(
 )
 _pkgctl_repo_clone_args__maintainer_opts() { :; }
 _pkgctl_repo_clone_args_m_opts() { _pkgctl_repo_clone_args__maintainer_opts; }
+_pkgctl_repo_clone_args__protocol_opts() { _devtools_completions_protocol; }
 _pkgctl_repo_clone_args__switch_opts() { :; }
 _pkgctl_repo_clone_args__jobs_opts() { :; }
 _pkgctl_repo_clone_args_j_opts() { _pkgctl_repo_clone_args__jobs_opts; }
@@ -280,9 +316,11 @@ _pkgctl_repo_clone_opts() { _devtools_completions_all_packages; }
 
 
 _pkgctl_repo_configure_args=(
+	--protocol
 	-j --jobs
 	-h --help
 )
+_pkgctl_repo_configure_args__protocol_opts() { _devtools_completions_protocol; }
 _pkgctl_repo_configure_args__jobs_opts() { :; }
 _pkgctl_repo_configure_args_j_opts() { _pkgctl_repo_clone_args__jobs_opts; }
 _pkgctl_repo_configure_opts() { _filedir -d; }
@@ -293,7 +331,6 @@ _pkgctl_repo_create_args=(
 	-h --help
 )
 
-
 _pkgctl_repo_switch_args=(
 	--discard-changes
 	-f --force
@@ -311,13 +348,44 @@ _pkgctl_repo_switch_opts() {
 	fi
 }
 
+_pkgctl_version_cmds=(
+	check
+	upgrade
+)
+
+_pkgctl_version_check_args=(
+	-v --verbose
+	-h --help
+)
+
+_pkgctl_version_check_opts() { _filedir -d; }
+
+_pkgctl_version_upgrade_args=(
+	-v --verbose
+	-h --help
+)
+
+_pkgctl_version_upgrade_opts() { _filedir -d; }
 
 _pkgctl_repo_web_args=(
+	--print
 	-h --help
 )
 _pkgctl_repo_web_opts() { _filedir -d; }
 
 
+_pkgctl_search_args=(
+	--no-default-filter
+	--json
+	-F --format
+	-N --no-line-number
+	-h --help
+)
+_pkgctl_search_opts() { :; }
+_pkgctl_search_args__format_opts() { _devtools_completions_search_format; }
+_pkgctl_search_args_F_opts() { _devtools_completions_search_format; }
+
+
 _pkgctl_diff_args=(
 	-l --list
 	-d --diffoscope
@@ -351,18 +419,27 @@ _devtools_completions_color() {
 	mapfile -t COMPREPLY < <(compgen -W "${_colors[*]}" -- "$cur")
 }
 _devtools_completions_arch() {
-	mapfile -t COMPREPLY < <(compgen -W "${_arch[*]}" -- "$cur")
+	mapfile -t COMPREPLY < <(compgen -W "${DEVTOOLS_VALID_ARCHES[*]}" -- "$cur")
 }
 _devtools_completions_repo() {
 	local optional=${1:-}
-	mapfile -t COMPREPLY < <(compgen -W "${optional} ${_repos[*]}" -- "$cur")
+	mapfile -t COMPREPLY < <(compgen -W "${optional} ${DEVTOOLS_VALID_REPOS[*]}" -- "$cur")
 }
 _devtools_completions_build_repo() {
-	mapfile -t COMPREPLY < <(compgen -W "${_build_repos[*]}" -- "$cur")
+	mapfile -t COMPREPLY < <(compgen -W "${DEVTOOLS_VALID_BUILDREPOS[*]}" -- "$cur")
 }
 _devtools_completions_all_packages() {
 	mapfile -t COMPREPLY < <(compgen -W "$(pacman -Sql)" -- "$cur")
 }
+_devtools_completions_protocol() {
+	mapfile -t COMPREPLY < <(compgen -W "https" -- "$cur")
+}
+_devtools_completions_inspect() {
+	mapfile -t COMPREPLY < <(compgen -W "${DEVTOOLS_VALID_INSPECT_MODES[*]}" -- "$cur")
+}
+_devtools_completions_search_format() {
+	mapfile -t COMPREPLY < <(compgen -W "${valid_search_output_format[*]}" -- "$cur")
+}
 
 __devtools_complete() {
 	local service=$1

contrib/completion/zsh/_devtools.in

@@ -3,12 +3,18 @@
 # SPDX-License-Identifier: GPL-3.0-or-later
 
 _DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+# shellcheck source=src/lib/valid-build-install.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-build-install.sh
 # shellcheck source=src/lib/valid-tags.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-tags.sh
 # shellcheck source=src/lib/valid-repos.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-repos.sh
+# shellcheck source=src/lib/valid-inspect.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-inspect.sh
+# shellcheck source=src/lib/valid-search.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-search.sh
 
-_binary_arch=${_arch[*]:0:-1}
+_binary_arch=${DEVTOOLS_VALID_ARCHES[*]:0:-1}
 _colors=(never always auto)
 
 _archbuild_args=(
@@ -36,17 +42,20 @@ _pkgctl_auth_status_args=(
 
 _pkgctl_build_args=(
 	"--arch=[Specify architectures to build for (disables auto-detection)]:arch:($_arch[*])"
-	"--repo=[Specify a target repository (disables auto-detection)]:repo:($_repos[*])"
+	"--repo=[Specify a target repository (disables auto-detection)]:repo:($DEVTOOLS_VALID_REPOS[*])"
 	'(-s --staging)'{-s,--staging}'[Build against the staging counterpart of the auto-detected repo]'
 	'(-t --testing)'{-t,--testing}'[Build against the testing counterpart of the auto-detected repo]'
 	'(-o --offload)'{-o,--offload}'[Build on a remote server and transfer artifacts afterwards]'
 	'(-c --clean)'{-c,--clean}'[Recreate the chroot before building]'
-	'(-I --install)'{-I,--install}'[Install a package into the working copy of the chroot]:target:_files -g "*.pkg.tar.*(.)"'
+	"--inspect[Spawn an interactive shell to inspect the chroot (never, always, failure)]:inspect:($DEVTOOLS_VALID_INSPECT_MODES[*])"
+	'(-I --install-to-chroot)'{-I,--install-to-chroot}'[Install a package to the working copy of the chroot]:target:_files -g "*.pkg.tar.*(.)"'
+	'(-i --install-to-host)'{-i,--install-to-host}"[Install the built packages to the host system]:mode:($DEVTOOLS_VALID_BUILD_INSTALL[*])"
 	'(-w --worker)'{-w,--worker}'[Name of the worker slot, useful for concurrent builds (disables auto-detection)]:slot:'
 	'--nocheck[Do not run the check() function in the PKGBUILD]'
 	'--pkgver=[Set pkgver, reset pkgrel and update checksums]:pkgver:'
 	'--pkgrel=[Set pkgrel to a given value]:pkgrel:'
 	'--rebuild[Increment the pkgrel variable]'
+	'--update-checksums[Force computation and update of the checksums (disables auto-detection)]'
 	'(-e --edit)'{-e,--edit}'[Edit the PKGBUILD before building]'
 	'(-r --release)'{-r,--release}'[Automatically commit, tag and release after building]'
 	'(-m --message=)'{-m,--message=}"[Use the given <msg> as the commit message]:message:"
@@ -64,15 +73,15 @@ _pkgctl_db_cmds=(
 
 _pkgctl_db_move_args=(
 	'(-h --help)'{-h,--help}'[Display usage]'
-	"1:src-repo:($_repos[*])"
-	"2:target-repo:($_repos[*])"
+	"1:src-repo:($DEVTOOLS_VALID_REPOS[*])"
+	"2:target-repo:($DEVTOOLS_VALID_REPOS[*])"
 	'*:pkgbase:_devtools_completions_all_packages'
 )
 
 _pkgctl_db_remove_args=(
 	'(-a --arch=)'{-a,--arch=}"[Override the architecture (disables auto-detection)]:arch:($_arch[*])"
 	'(-h --help)'{-h,--help}'[Display usage]'
-	"1:repo:($_repos[*])"
+	"1:repo:($DEVTOOLS_VALID_REPOS[*])"
 	'*:pkgbase:_devtools_completions_all_packages'
 )
 
@@ -82,7 +91,7 @@ _pkgctl_db_update_args=(
 
 _pkgctl_release_args=(
 	'(-m --message=)'{-m,--message=}"[Use the given <msg> as the commit message]:message:"
-	'(-r --repo=)'{-r,--repo=}"[Specify a target repository (disables auto-detection)]:repo:($_repos[*])"
+	'(-r --repo=)'{-r,--repo=}"[Specify a target repository for new packages]:repo:($DEVTOOLS_VALID_REPOS[*])"
 	'(-s --staging)'{-s,--staging}'[Release to the staging counterpart of the auto-detected repo]'
 	'(-t --testing)'{-t,--testing}'[Release to the testing counterpart of the auto-detected repo]'
 	'(-u --db-update)'{-u,--db-update}'[Automatically update the pacman database after uploading]'
@@ -90,6 +99,18 @@ _pkgctl_release_args=(
 	'*:git_dir:_files -/'
 )
 
+_pkgctl_aur_cmds=(
+	"pkgctl aur command"
+	"drop-from-repo[Drop a package from the official repository to the AUR]"
+)
+
+_pkgctl_aur_drop_from_repo_args=(
+	'(-f --force)'{-f,--force}'[Force push to the AUR overwriting the remote repository]'
+	'--no-disown[Do not disown the package on the AUR]'
+	'(-h --help)'{-h,--help}'[Display usage]'
+	'*:git_dir:_files -/'
+)
+
 _pkgctl_repo_cmds=(
 	"pkgctl repo command"
 	"clone[Clone a package repository]"
@@ -108,6 +129,7 @@ _pkgctl_repo_switch_args=(
 
 _pkgctl_repo_clone_args=(
 	'(-m --maintainer=)'{-m,--maintainer=}'[Clone all packages of the named maintainer]:maintainer:'
+	'--protocol[Clone the repository over https]:proto:(https)'
 	'--switch=[Switch the current working tree to a specified version]'
 	'--universe[Clone all existing packages, useful for cache warming]'
 	'(-j --jobs)'{-j,--jobs}'[Run up to N jobs in parallel (default: number of processing units)]:jobs:'
@@ -116,6 +138,7 @@ _pkgctl_repo_clone_args=(
 )
 
 _pkgctl_repo_configure_args=(
+	'--protocol[Configure remote url to use https]:proto:(https)'
 	'(-j --jobs)'{-j,--jobs}'[Run up to N jobs in parallel (default: number of processing units)]:jobs:'
 	'(-h --help)'{-h,--help}'[Display usage]'
 	'*:git_dir:_files -/'
@@ -128,10 +151,20 @@ _pkgctl_repo_create_args=(
 )
 
 _pkgctl_repo_web_args=(
+	'--print[Print the url instead of opening it with xdg-open]'
 	'(-h --help)'{-h,--help}'[Display usage]'
 	'*:git_dir:_files -/'
 )
 
+_pkgctl_search_args=(
+	'--no-default-filter[Do not apply default filter (like -path:keys/pgp/*.asc)]'
+	'--json[Enable printing results in JSON]'
+	'(-F --format)'{-F,--format}"[Controls the formatting of the results]:format:($valid_search_output_format[*])"
+	'(-N --no-line-number)'{-N,--no-line-number}"[Don't show line numbers when formatting results]"
+	'(-h --help)'{-h,--help}'[Display usage]'
+	'1:query'
+)
+
 _arch_nspawn_args=(
 	'-C[Location of a pacman config file]:pacman_config:_files -g "*.conf(.)"'
 	'-M[Location of a makepkg config file]:makepkg_config:_files -g "*.conf(.)"'
@@ -144,14 +177,14 @@ _arch_nspawn_args=(
 
 _archrelease_args=(
 	'-f[Force release without checks]'
-	"*:arch:($_tags[*])"
+	"*:arch:($DEVTOOLS_VALID_TAGS[*])"
 )
 
 _commitpkg_args=(
 	'-f[Force release without checks]'
 	'-s[Target repo server]'
 	'-l[Set bandwidth limit]:limit'
-	"-a[Release to a specific architecture only]:arch:($_arch[*])"
+	"-a[Release to a specific architecture only]:arch:($DEVTOOLS_VALID_ARCHES[*])"
 	'1:commit_msg'
 )
 
@@ -187,6 +220,7 @@ _makechrootpkg_args=(
 	'-n[Run namcap on the package]'
 	'-T[Build in a temporary directory]'
 	'-U[Run makepkg as a specified user]:makepkg_user'
+	"-x[Spawn an interactive shell to inspect the chroot (never, always, failure)]:inspect:($DEVTOOLS_VALID_INSPECT_MODES[*])"
 )
 
 _mkarchroot_args=(
@@ -210,12 +244,12 @@ _sogrep_args=(
 	'(-v --verbose)'{-v,--verbose}'[Show matched links in addition to pkgname]'
 	'(-r --refresh)'{-r,--refresh}'[Refresh the links databases]'
 	'(-h --help)'{-h,--help}'[Display usage]'
-	'1:repo:(all $_repos[*])'
+	'1:repo:(all $DEVTOOLS_VALID_REPOS[*])'
 	'2:libname'
 )
 
 _offload_build_args=(
-	'(-r --repo)'{-r,--repo}'[Build against a specific repository]:repo:($_build_repos[*])'
+	'(-r --repo)'{-r,--repo}'[Build against a specific repository]:repo:($DEVTOOLS_VALID_BUILDREPOS[*])'
 	'(-a --arch)'{-a,--arch}'[Build against a specific architecture]:arch:(${_binary_arch[*]})'
 	'(-s --server)'{-s,--server}'[Offload to a specific Build server]:server:'
 	'(-h --help)'{-h,--help}'[Display usage]'
@@ -223,6 +257,7 @@ _offload_build_args=(
 
 _makerepropkg_args=(
 	'-d[Run diffoscope if the package is unreproducible]'
+	'-n[Do not run the check() function in the PKGBUILD]'
 	'-c[Set pacman cache]:pacman_cache:_files -/'
 	'-M[Location of a makepkg config file]:makepkg_config:_files -g "*.conf(.)"'
 	'-h[Display usage]'
@@ -237,13 +272,15 @@ _devtools_completions_all_packages() {
 
 _pkgctl_cmds=(
 	"pkgctl command"
+	"aur[Interact with the Arch User Repository (AUR)]"
 	"auth[Authenticate with services like GitLab]"
 	"build[Build packages inside a clean chroot]"
-	"db[Pacman database modification for packge update, move etc]"
+	"db[Pacman database modification for package update, move etc]"
 	"diff[Compare package files using different modes]"
 	"release[Release step to commit, tag and upload build artifacts]"
 	"repo[Manage Git packaging repositories and their configuration]"
-	"version[Show pkgctl version information]"
+	"search[Search for an expression across the GitLab packaging group]"
+	"version[Check and manage package versions against upstream]"
 )
 
 _pkgctl_args=(
@@ -251,8 +288,22 @@ _pkgctl_args=(
 	'(-h --help)'{-h,--help}'[Display usage]'
 )
 
-_pkgctl_version_args=(
+_pkgctl_version_cmds=(
+	"pkgctl version command"
+	"check[Compares local package versions against upstream versions]"
+	"upgrade[Adjust the PKGBUILD to match the latest upstream version]"
+)
+
+_pkgctl_version_check_args=(
+	'(-v --verbose)'{-v,--verbose}'[Display results including up-to-date versions]'
 	'(-h --help)'{-h,--help}'[Display usage]'
+	'*:git_dir:_files -/'
+)
+
+_pkgctl_version_upgrade_args=(
+	'(-v --verbose)'{-v,--verbose}'[Display results including up-to-date versions]'
+	'(-h --help)'{-h,--help}'[Display usage]'
+	'*:git_dir:_files -/'
 )
 
 _pkgctl_diff_args=("${_diffpkg_args[@]}")
@@ -274,7 +325,7 @@ _handle_subcommands() {
 				fi
 				;;
 			args)
-				local service_sub=${service_name}_$line[1]
+				local service_sub=${service_name}_${line[1]//-/_}
 				if typeset -p ${service_sub}_args &> /dev/null; then
 					local cmd_args=${service_sub}_args[@]
 					_arguments -s "${(P)cmd_args}"

doc/man/makechrootpkg.1.asciidoc

@@ -73,4 +73,8 @@ Options
 *-U*::
 	Run makepkg as a specified user
 
+*-x* <when>::
+	Inspect chroot after build, possible modes are 'never' (default), 'always' or 'failure'
+
+
 include::include/footer.asciidoc[]

doc/man/makerepropkg.1.asciidoc

@@ -42,6 +42,9 @@ Options
 *-d*::
 	If packages are not reproducible, compare them using diffoscope.
 
+*-n*::
+	Do not run the check() function in the PKGBUILD.
+
 *-c*::
 	Set the pacman cache directory.
 

doc/man/pkgctl-aur-drop-from-repo.1.asciidoc

@@ -0,0 +1,41 @@
+pkgctl-aur-drop-from-repo(1)
+============================
+
+Name
+----
+pkgctl-aur-drop-from-repo - Drop a package from the official repository to the AUR
+
+Synopsis
+--------
+pkgctl aur drop-from-repo [OPTIONS] [PATH]...
+
+Description
+-----------
+
+Drops a specified package from the official repositories to the Arch User
+Repository.
+
+This command requires a local Git clone of the package repository. It
+reconfigures the repository for AUR compatibility and pushes it to the
+AUR. Afterwards, the package is removed from the official repository.
+
+By default, the package is automatically disowned in the AUR.
+
+Options
+-------
+
+*--no-disown*::
+	Do not disown the package on the AUR
+
+*-f, --force*::
+	Force push to the AUR overwriting the remote repository
+
+*-h, --help*::
+	Show a help text
+
+See Also
+--------
+
+linkman:pkgctl-db-remove[1]
+
+include::include/footer.asciidoc[]

doc/man/pkgctl-aur.1.asciidoc

@@ -0,0 +1,37 @@
+pkgctl-aur(1)
+=============
+
+Name
+----
+pkgctl-aur - Interact with the Arch User Repository (AUR)
+
+Synopsis
+--------
+pkgctl aur [OPTIONS] [SUBCOMMAND]
+
+Description
+-----------
+
+Provides a suite of tools designed for managing and interacting with the Arch
+User Repository (AUR). It simplifies various tasks related to AUR, including
+importing repositories, managing packages, and transitioning packages between
+the official repositories and the AUR.
+
+Options
+-------
+
+*-h, --help*::
+	Show a help text
+
+Subcommands
+-----------
+
+pkgctl aur drop-from-repo::
+	Drop a package from the official repository to the AUR
+
+See Also
+--------
+
+linkman:pkgctl-aur-drop-from-repo[1]
+
+include::include/footer.asciidoc[]

doc/man/pkgctl-build.1.asciidoc

@@ -21,7 +21,10 @@ Build Options
 	Specify architectures to build for (disables auto-detection)
 
 *--repo* 'REPO'::
-	Specify a target repository (disables auto-detection)
+	Specify target repository for new packages not in any official repo.
+	Fallback to `'extra'` when building packages that are not present in any
+	official repository yet. Using this option is disallowed if the package is
+	already released, as it would circumvent the auto-detection safeguard.
 
 *-s, --staging*::
 	Build against the staging counterpart of the auto-detected repo
@@ -35,8 +38,9 @@ Build Options
 *-c, --clean*::
 	Recreate the chroot before building
 
-*-I, --install* 'FILE'::
-	Install a package into the working copy of the chroot
+*--inspect* 'WHEN'::
+	Spawn an interactive shell to inspect the chroot after building. Useful to ease the debugging of a package build. +
+	Possible values for 'WHEN' are `'never'`, `'always'` or `'failure'`
 
 *-w, --worker* 'SLOT'::
 	Name of the worker slot, useful for concurrent builds. By default the slot
@@ -47,6 +51,17 @@ Build Options
 *--nocheck*::
 	Do not run the check() function in the PKGBUILD
 
+Install Options
+---------------
+
+*-I, --install-to-chroot* 'FILE'::
+	Install a package to the working copy of the chroot
+
+*-i, --install-to-host* 'MODE'::
+	Install the built packages to the host system. Useful when one wants to verify that the package works as intended.
+	* When 'MODE' is 'all', this installs all built packages
+	* When 'MODE' is 'auto', this installs all built packages which are currently installed
+
 PKGBUILD Options
 ----------------
 
@@ -59,6 +74,13 @@ PKGBUILD Options
 *--rebuild*::
 	Increment the current pkgrel variable
 
+*--update-checksums*::
+	Force computation and update of the checksums by disabling auto-detection. +
+	Should only be used in special circumstances, like when adding new patch
+	files to the source array. During regular packaging operations, checksums
+	are either automatically updated when upgrading a package using `--pkgver`
+	or should remain immutable during rebuilds.
+
 *-e, --edit*::
 	Edit the PKGBUILD before building
 

doc/man/pkgctl-db-move.1.asciidoc

@@ -3,17 +3,16 @@ pkgctl-db-move(1)
 
 Name
 ----
-pkgctl-db-update - Update the binary repository as final release step
+pkgctl-db-move - Move packages between binary repositories.
 
 Synopsis
 --------
-pkgctl db update [OPTIONS]
+pkgctl db move [OPTIONS] [SOURCE_REPO] [TARGET_REPO] [PKGBASE]...
 
 Description
 -----------
 
-Update the pacman database as final release step for packages that
-have been transfered and staged on 'repos.archlinux.org'.
+Move packages between binary repositories i.e. from 'extra-testing' to 'extra'.
 
 Options
 -------

doc/man/pkgctl-db-update.1.asciidoc

@@ -1,18 +1,19 @@
-pkgctl-db-move(1)
+pkgctl-db-update(1)
 =================
 
 Name
 ----
-pkgctl-db-move - Move packages between binary repositories
+pkgctl-db-update - Update the binary repository as final release step
 
 Synopsis
 --------
-pkgctl db move [OPTIONS] [SOURCE_REPO] [TARGET_REPO] [PKGBASE]...
+pkgctl db update [OPTIONS]
 
 Description
 -----------
 
-Move packages between pacman repositories.
+Update the pacman database as final release step for packages that
+have been transfered and staged on 'repos.archlinux.org'.
 
 Options
 -------

doc/man/pkgctl-release.1.asciidoc

@@ -27,7 +27,9 @@ Options
 	Use the given <msg> as the commit message
 
 *-r, --repo* 'REPO'::
-	Specify a target repository (disables auto-detection)
+	Specify target repository for new packages not in any official repo.
+	Using this option is disallowed if the package is already released, as it
+	would circumvent the auto-detection safeguard.
 
 *-s, --staging*::
 	Build against the staging counterpart of the auto-detected repo

doc/man/pkgctl-repo-clone.1.asciidoc

@@ -25,6 +25,9 @@ Options
 *-m, --maintainer* 'NAME'::
 	Clone all packages of the named maintainer
 
+*--protocol* 'https'::
+	Clone the repository over https
+
 *--universe*::
 	Clone all existing packages, useful for cache warming
 

doc/man/pkgctl-repo-configure.1.asciidoc

@@ -22,9 +22,14 @@ The remote protocol is automatically determined from the author email
 address by choosing SSH for all official packager identities and
 read-only HTTPS otherwise.
 
+Git default excludes and hooks are applied to the configured repo.
+
 Options
 -------
 
+*--protocol* 'https'::
+	Configure remote url to use https
+
 *-j, --jobs* 'N'::
 	Run up to N jobs in parallel. By default the number of jobs is equal to the
 	number of available processing units. For sequential processing this option

doc/man/pkgctl-repo-web.1.asciidoc

@@ -18,6 +18,9 @@ no arguments, open the package cloned in the current working directory.
 Options
 -------
 
+*--print*::
+	Print the url instead of opening it with xdg-open
+
 *-h, --help*::
 	Show a help text
 

doc/man/pkgctl-search.1.asciidoc

@@ -0,0 +1,71 @@
+pkgctl-search(1)
+================
+
+Name
+----
+pkgctl-search - Search for an expression across the GitLab packaging group
+
+Synopsis
+--------
+pkgctl search [OPTIONS] QUERY
+
+Description
+-----------
+
+Search for an expression across the GitLab packaging group.
+
+To use a filter, include it in your query. You may use wildcards (*) to
+use glob matching.
+
+Available filters for the blobs scope: path, extension
+
+Every usage of the search command must be authenticated. Consult the
+`'pkgctl auth'` command to authenticate with GitLab or view the authentication
+status.
+
+Search Tips
+-----------
+
+	Syntax  Description    Example
+	───────────────────────────────────────
+	"       Exact search   "gem sidekiq"
+	~       Fuzzy search   J~ Doe
+	|       Or             display | banner
+	+       And            display +banner
+	-       Exclude        display -banner
+	*       Partial        bug error 50*
+	\       Escape         \*md
+	#       Issue ID       #23456
+	!       Merge request  !23456
+
+Options
+-------
+
+*-h, --help*::
+	Show a help text
+
+Filter Options
+--------------
+
+*--no-default-filter*::
+	Do not apply default filter (like -path:keys/pgp/*.asc)
+
+Output Options
+--------------
+
+*--json*::
+	Enable printing in JSON; Shorthand for `'--format json'`
+
+*-F, --format* 'FORMAT'::
+	Controls the formatting of the results; `FORMAT` is `'pretty'`, `'plain'`,
+	or `'json'` (default `pretty`)
+
+*-N, --no-line-number*::
+	Don't show line numbers when formatting results
+
+See Also
+--------
+
+linkman:pkgctl-auth[1]
+
+include::include/footer.asciidoc[]

doc/man/pkgctl-version-check.1.asciidoc

@@ -0,0 +1,66 @@
+pkgctl-version-check(1)
+=======================
+
+Name
+----
+pkgctl-version-check - Compares local package versions against upstream
+
+Synopsis
+--------
+pkgctl version check [OPTIONS] [PKGBASE...]
+
+Description
+-----------
+
+Compares the versions of packages in the local packaging repository against
+their latest upstream versions.
+
+Upon execution, it generates a grouped list that provides detailed insights
+into each package's status. For each package, it displays the current local
+version alongside the latest version available upstream.
+
+Outputs a summary of up-to-date packages, out-of-date packages, and any check
+failures.
+
+This simplifies the maintenance of PKGBUILD files, reducing the manual effort
+required to track version changes from upstream sources.
+
+Configuration
+-------------
+
+Uses linkman:nvchecker[1] and a `.nvchecker.toml` file located alongside the
+PKGBUILD. Refer to the configuration section in linkman:pkgctl-version[1].
+
+Options
+-------
+
+*-v, --verbose*::
+	Display results including up-to-date versions
+
+*-h, --help*::
+	Show a help text
+
+Exit Codes
+----------
+
+On exit, return one of the following codes:
+
+*0*::
+	Normal exit condition, all checked versions are up-to-date
+
+*1*::
+	Unknown cause of failure
+
+*2*::
+	Normal exit condition, but there are out-of-date versions
+
+*3*::
+	Failed to run some version checks
+
+See Also
+--------
+
+linkman:pkgctl-version[1]
+linkman:nvchecker[1]
+
+include::include/footer.asciidoc[]

doc/man/pkgctl-version-upgrade.1.asciidoc

@@ -0,0 +1,50 @@
+pkgctl-version-upgrade(1)
+=========================
+
+Name
+----
+pkgctl-version-upgrade - Adjust the PKGBUILD to match the latest upstream version
+
+Synopsis
+--------
+pkgctl version upgrade [OPTIONS] [PKGBASE...]
+
+Description
+-----------
+
+Streamlines the process of keeping PKGBUILD files up-to-date with the latest
+upstream versions.
+
+Upon execution, it automatically adjusts the PKGBUILD file, ensuring that the
+pkgver field is set to match the latest version available from the upstream
+source. In addition to updating the pkgver, this command also resets the pkgrel
+to 1.
+
+Outputs a summary of upgraded packages, up-to-date packages, and any check
+failures.
+
+This simplifies the maintenance of PKGBUILD files, reducing the manual effort
+required to track and implement version changes from upstream sources.
+
+Configuration
+-------------
+
+Uses linkman:nvchecker[1] and a `.nvchecker.toml` file located alongside the
+PKGBUILD. Refer to the configuration section in linkman:pkgctl-version[1].
+
+Options
+-------
+
+*-v, --verbose*::
+	Display results including up-to-date versions
+
+*-h, --help*::
+	Show a help text
+
+See Also
+--------
+
+linkman:pkgctl-version[1]
+linkman:nvchecker[1]
+
+include::include/footer.asciidoc[]

doc/man/pkgctl-version.1.asciidoc

@@ -3,16 +3,38 @@ pkgctl-version(1)
 
 Name
 ----
-pkgctl-version - Show pkgctl version information
+pkgctl-version - Check and manage package versions against upstream
+
 
 Synopsis
 --------
-pkgctl version [OPTIONS]
+pkgctl version [OPTIONS] [SUBCOMMAND]
 
 Description
 -----------
 
-Shows the current version information of pkgctl.
+Commands related to package versions, including checks for outdated packages.
+
+Uses linkman:nvchecker[1] and a `.nvchecker.toml` file located alongside the
+PKGBUILD.
+
+Configuration
+-------------
+
+The `.nvchecker.toml` file must contain a section that matches the
+package's pkgbase. The pkgbase section within the `.nvchecker.toml` file
+specifies the source and method for checking the latest version of the
+corresponding package.
+
+For detailed information on the various configuration options available for the
+`.nvchecker.toml` file, refer to the configuration files section in
+linkman:nvchecker[1]. This documentation provides insights into the possible
+options that can be utilized to customize the version checking process.
+
+To supply GitHub or GitLab tokens to nvchecker, a `keyfile.toml` should be
+placed in the `$XDG_CONFIG_HOME`/nvchecker` directory. This keyfile is
+used for providing the necessary authentication tokens required for
+accessing the GitHub or GitLab API.
 
 Options
 -------
@@ -20,4 +42,19 @@ Options
 *-h, --help*::
 	Show a help text
 
+Subcommands
+-----------
+
+pkgctl version check::
+	Compares local package versions against upstream
+
+pkgctl version upgrade::
+	Adjust the PKGBUILD to match the latest upstream version
+
+See Also
+--------
+
+linkman:pkgctl-version-check[1]
+linkman:pkgctl-version-upgrade[1]
+
 include::include/footer.asciidoc[]

doc/man/pkgctl.1.asciidoc

@@ -26,6 +26,9 @@ Options
 Subcommands
 -----------
 
+pkgctl aur::
+	Interact with the Arch User Repository
+
 pkgctl auth::
 	Authenticate with services like GitLab
 
@@ -33,7 +36,7 @@ pkgctl build::
 	Build packages inside a clean chroot
 
 pkgctl db::
-	Pacman database modification for packge update, move etc
+	Pacman database modification for package update, move etc
 
 pkgctl diff::
 	Compare package files using different modes
@@ -44,18 +47,23 @@ pkgctl release::
 pkgctl repo::
 	Manage Git packaging repositories and their configuration
 
+pkgctl search::
+	Search for an expression across the GitLab packaging group
+
 pkgctl version::
-	Show pkgctl version information
+	Check and manage package versions against upstream
 
 See Also
 --------
 
+linkman:pkgctl-aur[1]
 linkman:pkgctl-auth[1]
 linkman:pkgctl-build[1]
 linkman:pkgctl-db[1]
 linkman:pkgctl-diff[1]
 linkman:pkgctl-release[1]
 linkman:pkgctl-repo[1]
+linkman:pkgctl-search[1]
 linkman:pkgctl-version[1]
 
 include::include/footer.asciidoc[]

src/arch-nspawn.in

@@ -16,7 +16,6 @@ umask 0022
 working_dir=''
 
 files=()
-mount_args=()
 
 usage() {
 	echo "Usage: ${0##*/} [options] working-dir [systemd-nspawn arguments]"
@@ -32,6 +31,9 @@ usage() {
 	exit 1
 }
 
+# save all args for check_root
+orig_args=("$@")
+
 while getopts 'hC:M:c:f:s' arg; do
 	case "$arg" in
 		C) pac_conf="$OPTARG" ;;
@@ -46,13 +48,23 @@ done
 shift $((OPTIND - 1))
 
 (( $# < 1 )) && die 'You must specify a directory.'
-check_root "" "${BASH_SOURCE[0]}" "$@"
+check_root "" "${BASH_SOURCE[0]}" "${orig_args[@]}"
 
 working_dir=$(readlink -f "$1")
 shift 1
 
 [[ -z $working_dir ]] && die 'Please specify a working directory.'
 
+nspawn_args=(
+	--quiet
+	--directory="$working_dir"
+	--setenv="PATH=/usr/local/sbin:/usr/local/bin:/usr/bin"
+	--register=no
+	--slice="devtools-$(systemd-escape "${SUDO_USER:-$USER}")"
+	--machine="arch-nspawn-$$"
+	--as-pid2
+)
+
 if (( ${#cache_dirs[@]} == 0 )); then
 	mapfile -t cache_dirs < <(pacman-conf --config "${pac_conf:-$working_dir/etc/pacman.conf}" CacheDir)
 fi
@@ -80,10 +92,10 @@ while read -r line; do
 	done
 done < <(pacman-conf --config "${pac_conf:-$working_dir/etc/pacman.conf}" --repo-list)
 
-mount_args+=("--bind=${cache_dirs[0]//:/\\:}")
+nspawn_args+=(--bind="${cache_dirs[0]//:/\\:}")
 
 for cache_dir in "${cache_dirs[@]:1}"; do
-	mount_args+=("--bind-ro=${cache_dir//:/\\:}")
+	nspawn_args+=(--bind-ro="${cache_dir//:/\\:}")
 done
 
 # {{{ functions
@@ -126,9 +138,4 @@ else
 	set_arch="${CARCH}"
 fi
 
-exec ${CARCH:+setarch "$set_arch"} systemd-nspawn -q \
-	-D "$working_dir" \
-	-E "PATH=/usr/local/sbin:/usr/local/bin:/usr/bin" \
-	--register=no --keep-unit --as-pid2 \
-	"${mount_args[@]}" \
-	"$@"
+exec ${CARCH:+setarch "$set_arch"} systemd-nspawn "${nspawn_args[@]}" "$@"

src/archrelease.in

@@ -35,7 +35,7 @@ fi
 # validate repo is really repo-arch
 if [[ -z $FORCE ]]; then
 	for tag in "$@"; do
-		if ! in_array "$tag" "${_tags[@]}"; then
+		if ! in_array "$tag" "${DEVTOOLS_VALID_TAGS[@]}"; then
 			die "archrelease: Invalid tag: '%s' (use -f to force release)" "$tag"
 		fi
 	done

src/commitpkg.in

@@ -5,9 +5,13 @@
 _DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
 # shellcheck source=src/lib/common.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/util/srcinfo.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/srcinfo.sh
 
 source /usr/share/makepkg/util/util.sh
 
+set -eo pipefail
+
 
 check_pkgbuild_validity() {
 	# shellcheck source=contrib/makepkg/PKGBUILD.proto
@@ -70,6 +74,12 @@ if ! repo_spec=$(git config --local devtools.version) || [[ ${repo_spec} != "${G
 	exit 1
 fi
 
+if ! repo_variant=$(git config --local devtools.variant) || [[ ${repo_variant} != canonical ]]; then
+	error "cannot release from a repository with none canonical specs (%s), try:" "${repo_variant:-development}"
+	msg2 'pkgctl repo configure'
+	exit 1
+fi
+
 if [[ "$(git symbolic-ref --short HEAD)" != main ]]; then
 	die 'must be run from the main branch'
 fi
@@ -111,7 +121,7 @@ if (( ${#validpgpkeys[@]} != 0 )); then
 fi
 
 # find files which should be under source control
-needsversioning=()
+needsversioning=(PKGBUILD)
 for s in "${source[@]}"; do
 	[[ $s != *://* ]] && needsversioning+=("$s")
 done
@@ -129,6 +139,10 @@ done
 # assert that they really are controlled by git
 if (( ${#needsversioning[*]} )); then
 	for file in "${needsversioning[@]}"; do
+		# skip none existing files
+		if [[ ! -f "${file}" ]]; then
+			continue
+		fi
 		if ! git ls-files --error-unmatch "$file"; then
 			die "%s is not under version control" "$file"
 		fi
@@ -173,7 +187,12 @@ done
 # check for PKGBUILD standards
 check_pkgbuild_validity
 
-if [[ -n $(git status --short --untracked-files=no) ]]; then
+# auto generate .SRCINFO
+# shellcheck disable=SC2119
+write_srcinfo_file
+git add --force .SRCINFO
+
+if [[ -n $(git status --porcelain --untracked-files=no) ]]; then
 	stat_busy 'Staging files'
 	for f in $(git ls-files --modified); do
 		git add "$f"
@@ -194,14 +213,14 @@ if [[ -n $(git status --short --untracked-files=no) ]]; then
 		echo "$msgtemplate" > "$msgfile"
 		if [[ -n $GIT_EDITOR ]]; then
 			$GIT_EDITOR "$msgfile" || die
+		elif giteditor=$(git config --get core.editor); then
+			$giteditor "$msgfile" || die
 		elif [[ -n $VISUAL ]]; then
 			$VISUAL "$msgfile" || die
 		elif [[ -n $EDITOR ]]; then
 			$EDITOR "$msgfile" || die
-		elif giteditor=$(git config --get core.editor); then
-			$giteditor "$msgfile" || die
 		else
-			die "No usable editor found (tried \$GIT_EDITOR, \$VISUAL, \$EDITOR, git config [core.editor])."
+			die "No usable editor found (tried \$GIT_EDITOR, git config [core.editor], \$VISUAL, \$EDITOR)."
 		fi
 		[[ -s $msgfile ]] || die
 		stat_busy 'Committing changes'

src/diffpkg.in

@@ -215,7 +215,8 @@ diff_pkgs() {
 	[[ -f $oldpkg ]] || die "No such file: %s" "${oldpkg}"
 	[[ -f $newpkg ]] || die "No such file: %s" "${newpkg}"
 
-	DIFFOPTIONS+=(--label "${oldpkg}" --label "${newpkg}")
+	local -a diffoptions
+	diffoptions=("${DIFFOPTIONS[@]}" --label "${oldpkg}" --label "${newpkg}")
 
 	if (( TARLIST )); then
 		tar_list "$oldpkg" > "$TMPDIR/old"
@@ -236,7 +237,7 @@ diff_pkgs() {
 		# Resolve dynamic auto width one we know the content to diff
 		if [[ $DIFFWIDTH == --width=auto ]]; then
 			AUTOLENGTH=$(file_diff_columns "$TMPDIR/old" "$TMPDIR/new")
-			DIFFOPTIONS+=("--width=${AUTOLENGTH}")
+			diffoptions+=("--width=${AUTOLENGTH}")
 		fi
 
 		# Print a header for side-by-side view as it lacks labels
@@ -244,7 +245,7 @@ diff_pkgs() {
 			printf -- "--- %s\n+++ %s\n" "${oldpkg}" "${newpkg}"
 		fi
 
-		diff "${DIFFOPTIONS[@]}" "$TMPDIR/old" "$TMPDIR/new"
+		diff "${diffoptions[@]}" "$TMPDIR/old" "$TMPDIR/new"
 	fi
 
 	if (( DIFFOSCOPE )); then

src/lib/api/archweb.sh

@@ -0,0 +1,57 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_API_ARCHWEB_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_API_ARCHWEB_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+
+set -e
+set -o pipefail
+
+
+archweb_query_all_packages() {
+	[[ -z ${WORKDIR:-} ]] && setup_workdir
+
+	stat_busy "Query all released packages"
+	mapfile -t pkgbases < <(
+		curl --location --show-error --no-progress-meter --fail --retry 3 --retry-delay 3 \
+			"${PKGBASE_MAINTAINER_URL}" 2> "${WORKDIR}/error" \
+			| jq --raw-output --exit-status 'keys[]' 2> "${WORKDIR}/error"
+	)
+	if ! wait $!; then
+		stat_failed
+		print_workdir_error
+		return 1
+	fi
+	stat_done
+
+	printf "%s\n" "${pkgbases[@]}"
+	return 0
+}
+
+
+archweb_query_maintainer_packages() {
+	local maintainer=$1
+
+	[[ -z ${WORKDIR:-} ]] && setup_workdir
+
+	stat_busy "Query maintainer packages"
+	mapfile -t pkgbases < <(
+		curl --location --show-error --no-progress-meter --fail --retry 3 --retry-delay 3 \
+			"${PKGBASE_MAINTAINER_URL}" 2> "${WORKDIR}/error" \
+			| jq --raw-output --exit-status '. as $parent | keys[] | select(. as $key | $parent[$key] | index("'"${maintainer}"'"))' 2> "${WORKDIR}/error"
+	)
+	if ! wait $!; then
+		stat_failed
+		print_workdir_error
+		return 1
+	fi
+	stat_done
+
+	printf "%s\n" "${pkgbases[@]}"
+	return 0
+}

src/lib/api/gitlab.sh

@@ -13,13 +13,63 @@ source "${_DEVTOOLS_LIBRARY_DIR}"/lib/config.sh
 
 set -e
 
+graphql_api_call() {
+	local outfile=$1
+	local request=$2
+	local node_type=$3
+	local data=$4
+	local hasNextPage cursor
+
+	# empty token
+	if [[ -z "${GITLAB_TOKEN}" ]]; then
+		msg_error "  api call failed: No token provided"
+		return 1
+	fi
+
+	[[ -z ${WORKDIR:-} ]] && setup_workdir
+	api_workdir=$(mktemp --tmpdir="${WORKDIR}" --directory pkgctl-gitlab-api.XXXXXXXXXX)
+
+	# normalize graphql data and prepare query
+	data="${data//\"/\\\"}"
+	data='{
+		"query": "'"${data}"'"
+	}'
+	data="${data//$'\t'/ }"
+	data="${data//$'\n'/}"
+
+	cursor=""
+	hasNextPage=true
+	while [[ ${hasNextPage} == true ]]; do
+		data=$(sed -E 's|after: \\"[a-zA-Z0-9]*\\"|after: \\"'"${cursor}"'\\"|' <<< "${data}")
+		result="${api_workdir}/result.${cursor}"
+
+		if ! curl --request "${request}" \
+				--url "https://${GITLAB_HOST}/api/graphql" \
+				--header "Authorization: Bearer ${GITLAB_TOKEN}" \
+				--header "Content-Type: application/json" \
+				--data "${data}" \
+				--output "${result}" \
+				--silent; then
+			msg_error "  api call failed: $(cat "${outfile}")"
+			return 1
+		fi
+
+		hasNextPage=$(jq --raw-output ".data | .${node_type} | .pageInfo | .hasNextPage" < "${result}")
+		cursor=$(jq --raw-output ".data | .${node_type} | .pageInfo | .endCursor" < "${result}")
+
+		cp "${result}" "${api_workdir}/tmp"
+		jq ".data.${node_type}.nodes" "${api_workdir}/tmp" > "${result}"
+	done
+
+	jq --slurp add "${api_workdir}"/result.* > "${outfile}"
+	return 0
+}
 
 gitlab_api_call() {
 	local outfile=$1
 	local request=$2
 	local endpoint=$3
 	local data=${4:-}
-	local error
 
 	# empty token
 	if [[ -z "${GITLAB_TOKEN}" ]]; then
@@ -38,27 +88,113 @@ gitlab_api_call() {
 		return 1
 	fi
 
+	if ! gitlab_check_api_errors "${outfile}"; then
+		return 1
+	fi
+
+	return 0
+}
+
+gitlab_api_call_paged() {
+	local outfile=$1
+	local status_file=$2
+	local request=$3
+	local endpoint=$4
+	local data=${5:-}
+	local result header
+
+	# empty token
+	if [[ -z "${GITLAB_TOKEN}" ]]; then
+		msg_error "  api call failed: No token provided"
+		return 1
+	fi
+
+	[[ -z ${WORKDIR:-} ]] && setup_workdir
+	api_workdir=$(mktemp --tmpdir="${WORKDIR}" --directory pkgctl-gitlab-api.XXXXXXXXXX)
+	tmp_file=$(mktemp --tmpdir="${api_workdir}" spinner.tmp.XXXXXXXXXX)
+
+	local next_page=1
+	local total_pages=1
+
+	while [[ -n "${next_page}" ]]; do
+		percentage=$(( 100 * next_page / total_pages ))
+		printf "📡 Querying GitLab: %s/%s [%s] %%spinner%%" \
+			"${BOLD}${next_page}" "${total_pages}" "${percentage}%${ALL_OFF}"  \
+			> "${tmp_file}"
+		mv "${tmp_file}" "${status_file}"
+
+		result="${api_workdir}/result.${next_page}"
+		header="${api_workdir}/header"
+		if ! curl --request "${request}" \
+				--get \
+				--url "https://${GITLAB_HOST}/api/v4/${endpoint}&per_page=100&page=${next_page}" \
+				--header "PRIVATE-TOKEN: ${GITLAB_TOKEN}" \
+				--header "Content-Type: application/json" \
+				--data-urlencode "${data}" \
+				--dump-header "${header}" \
+				--output "${result}" \
+				--silent; then
+			msg_error "  api call failed: $(cat "${result}")"
+			return 1
+		fi
+
+		if ! gitlab_check_api_errors "${result}"; then
+			return 1
+		fi
+
+		next_page=$(grep "x-next-page" "${header}" | tr -d '\r' | awk '{ print $2 }')
+		total_pages=$(grep "x-total-pages" "${header}" | tr -d '\r' | awk '{ print $2 }')
+	done
+
+	jq --slurp add "${api_workdir}"/result.* > "${outfile}"
+	return 0
+}
+
+gitlab_check_api_errors() {
+	local file=$1
+	local error
+
+	# search API only returns an array, no errors
+	if [[ $(jq --raw-output 'type' < "${file}") == "array" ]]; then
+		return 0
+	fi
+
 	# check for general purpose api error
-	if error=$(jq --raw-output --exit-status '.error' < "${outfile}"); then
+	if error=$(jq --raw-output --exit-status '.error' < "${file}"); then
 		msg_error "  api call failed: ${error}"
 		return 1
 	fi
 
 	# check for api specific error messages
-	if ! jq --raw-output --exit-status '.id' < "${outfile}" >/dev/null; then
-		if jq --raw-output --exit-status '.message | keys[]' < "${outfile}" &>/dev/null; then
+	if ! jq --raw-output --exit-status '.id' < "${file}" >/dev/null; then
+		if jq --raw-output --exit-status '.message | keys[]' < "${file}" &>/dev/null; then
 			while read -r error; do
 				msg_error "  api call failed: ${error}"
-			done < <(jq --raw-output --exit-status '.message|to_entries|map("\(.key) \(.value[])")[]' < "${outfile}")
-		elif error=$(jq --raw-output --exit-status '.message' < "${outfile}"); then
+			done < <(jq --raw-output --exit-status '.message|to_entries|map("\(.key) \(.value[])")[]' < "${file}")
+		elif error=$(jq --raw-output --exit-status '.message' < "${file}"); then
 			msg_error "  api call failed: ${error}"
 		fi
 		return 1
 	fi
-
 	return 0
 }
 
+graphql_check_api_errors() {
+	local file=$1
+	local error
+
+	# early exit if we do not have errors
+	if ! jq --raw-output --exit-status '.errors[]' < "${file}" &>/dev/null; then
+		return 0
+	fi
+
+	# check for api specific error messages
+	while read -r error; do
+		msg_error "  api call failed: ${error}"
+	done < <(jq --raw-output --exit-status '.errors[].message' < "${file}")
+	return 1
+}
+
 gitlab_api_get_user() {
 	local outfile username
 
@@ -81,6 +217,23 @@ gitlab_api_get_user() {
 	return 0
 }
 
+gitlab_api_get_project_name_mapping() {
+	local query=$1
+	local outfile
+
+	[[ -z ${WORKDIR:-} ]] && setup_workdir
+	outfile=$(mktemp --tmpdir="${WORKDIR}" pkgctl-gitlab-api.XXXXXXXXXX)
+
+	# query user details
+	if ! graphql_api_call "${outfile}" POST projects "${query}"; then
+		msg_warn "  Invalid token provided?"
+		exit 1
+	fi
+
+	cat "${outfile}"
+	return 0
+}
+
 # Convert arbitrary project names to GitLab valid path names.
 #
 # GitLab has several limitations on project and group names and also maintains
@@ -130,3 +283,22 @@ gitlab_api_create_project() {
 	printf "%s" "${path}"
 	return 0
 }
+
+# TODO: parallelize
+# https://docs.gitlab.com/ee/api/search.html#scope-blobs
+gitlab_api_search() {
+	local search=$1
+	local status_file=$2
+	local outfile
+
+	[[ -z ${WORKDIR:-} ]] && setup_workdir
+	outfile=$(mktemp --tmpdir="${WORKDIR}" pkgctl-gitlab-api.XXXXXXXXXX)
+
+	if ! gitlab_api_call_paged "${outfile}" "${status_file}" GET "/groups/archlinux%2fpackaging%2fpackages/search?scope=blobs" "search=${search}"; then
+		return 1
+	fi
+
+	cat "${outfile}"
+
+	return 0
+}

src/lib/aur.sh

@@ -0,0 +1,65 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_AUR_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_AUR_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+
+set -eo pipefail
+
+
+pkgctl_aur_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+	cat <<- _EOF_
+		Usage: ${COMMAND} [COMMAND] [OPTIONS]
+
+		Interact with the Arch User Repository (AUR).
+
+		Provides a suite of tools designed for managing and interacting with the Arch
+		User Repository (AUR). It simplifies various tasks related to AUR, including
+		importing repositories, managing packages, and transitioning packages between
+		the official repositories and the AUR.
+
+		COMMANDS
+		    drop-from-repo    Drop a package from the official repository to the AUR
+
+		OPTIONS
+		    -h, --help        Show this help text
+
+		EXAMPLES
+		    $ ${COMMAND} drop-from-repo libfoo
+_EOF_
+}
+
+pkgctl_aur() {
+	if (( $# < 1 )); then
+		pkgctl_aur_usage
+		exit 0
+	fi
+
+	# option checking
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_aur_usage
+				exit 0
+				;;
+			drop-from-repo)
+				_DEVTOOLS_COMMAND+=" $1"
+				shift
+				# shellcheck source=src/lib/aur/drop-from-repo.sh
+				source "${_DEVTOOLS_LIBRARY_DIR}"/lib/aur/drop-from-repo.sh
+				pkgctl_aur_drop_from_repo "$@"
+				exit 0
+				;;
+			-*)
+				die "invalid argument: %s" "$1"
+				;;
+			*)
+				die "invalid command: %s" "$1"
+				;;
+		esac
+	done
+}

src/lib/aur/drop-from-repo.sh

@@ -0,0 +1,166 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_AUR_DROP_FROM_REPO_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_AUR_DROP_FROM_REPO_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/db/remove.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/db/remove.sh
+# shellcheck source=src//lib/util/pacman.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/pacman.sh
+
+source /usr/share/makepkg/util/message.sh
+
+set -eo pipefail
+
+
+pkgctl_aur_drop_from_repo_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+	cat <<- _EOF_
+		Usage: ${COMMAND} [OPTIONS] [PATH]...
+
+		Drops a specified package from the official repositories to the Arch
+		User Repository.
+
+		This command requires a local Git clone of the package repository. It
+		reconfigures the repository for AUR compatibility and pushes it to the
+		AUR. Afterwards, the package is removed from the official repository.
+
+		By default, the package is automatically disowned in the AUR.
+
+		OPTIONS
+		    --no-disown    Do not disown the package on the AUR
+		    -f, --force    Force push to the AUR overwriting the remote repository
+		    -h, --help     Show this help text
+
+		EXAMPLES
+		    $ ${COMMAND} foo
+		    $ ${COMMAND} --no-disown --force
+_EOF_
+}
+
+pkgctl_aur_drop_from_repo() {
+	# options
+	local paths=()
+	local DISOWN=1
+	local FORCE=0
+
+	# variables
+	local path realpath pkgbase pkgrepo remote_url
+
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_aur_drop_from_repo_usage
+				exit 0
+				;;
+			--no-disown)
+				DISOWN=0
+				shift
+				;;
+			-f|--force)
+				FORCE=1
+				shift
+				;;
+			--)
+				shift
+				break
+				;;
+			-*)
+				die "Invalid argument: %s" "$1"
+				;;
+			*)
+				paths=("$@")
+				break
+				;;
+		esac
+	done
+
+	# check if invoked without any path from within a packaging repo
+	if (( ${#paths[@]} == 0 )); then
+		if [[ -f PKGBUILD ]]; then
+			paths=(".")
+		else
+			pkgctl_aur_drop_from_repo_usage
+			exit 1
+		fi
+	fi
+
+	for path in "${paths[@]}"; do
+		if ! realpath=$(realpath -e "${path}"); then
+			die "No such directory: ${path}"
+		fi
+
+		pkgbase=$(basename "${realpath}")
+		pkgbase=${pkgbase%.git}
+
+		if [[ ! -d "${path}/.git" ]]; then
+			die "Not a Git repository: ${path}"
+		fi
+
+		pushd "${path}" >/dev/null
+
+		if [[ ! -f PKGBUILD ]]; then
+			die 'PKGBUILD not found in %s' "${path}"
+		fi
+
+		msg "Dropping ${pkgbase} to the AUR"
+
+		remote_url="${AUR_URL_SSH}:${pkgbase}.git"
+		if ! git remote add origin "${remote_url}" &>/dev/null; then
+			git remote set-url origin "${remote_url}"
+		fi
+
+		# move the main branch to master
+		if [[ $(git symbolic-ref --quiet --short HEAD) == main ]]; then
+			git branch --move master
+			git config branch.master.merge refs/heads/master
+			git remote set-head origin master
+		fi
+
+		# auto generate .SRCINFO if not already present
+		if [[ -z "$(git ls-tree -r HEAD --name-only .SRCINFO)" ]]; then
+			stat_busy 'Generating .SRCINFO'
+			makepkg --printsrcinfo > .SRCINFO
+			stat_done
+
+			git add --force -- .SRCINFO
+			git commit --quiet --message "Adding .SRCINFO" -- .SRCINFO
+		fi
+
+		msg "Pushing ${pkgbase} to the AUR"
+		if (( FORCE )); then
+			AUR_OVERWRITE=1 \
+				GIT_SSH_COMMAND="ssh -o SendEnv=AUR_OVERWRITE" \
+				git push --force origin master
+		else
+			git push origin master
+		fi
+
+		if (( DISOWN )); then
+			msg "Disowning ${pkgbase} on the AUR"
+			# shellcheck disable=SC2029
+			ssh "${AUR_URL_SSH}" disown "${pkgbase}"
+		fi
+
+		# auto-detection of the repo to remove from
+		if ! pkgrepo=$(get_pacman_repo_from_pkgbuild PKGBUILD); then
+			die 'Failed to get pacman repo'
+		fi
+
+		msg "Deleting ${pkgbase} from the official repository"
+		if [[ -z "${pkgrepo}" ]]; then
+			warning 'Did not find %s in any repository, please delete manually' "${pkgbase}"
+		else
+			msg2 "  repo: ${pkgrepo}"
+			pkgctl_db_remove "${pkgrepo}" "${pkgbase}"
+		fi
+
+		popd >/dev/null
+	done
+}

src/lib/build/build.sh

@@ -14,18 +14,25 @@ source "${_DEVTOOLS_LIBRARY_DIR}"/lib/db/update.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/release.sh
 # shellcheck source=src/lib/util/git.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/git.sh
+# shellcheck source=src/lib/util/srcinfo.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/srcinfo.sh
 # shellcheck source=src/lib/util/pacman.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/pacman.sh
+# shellcheck source=src/lib/util/pkgbuild.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/pkgbuild.sh
+# shellcheck source=src/lib/valid-build-install.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-build-install.sh
 # shellcheck source=src/lib/valid-repos.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-repos.sh
 # shellcheck source=src/lib/valid-tags.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-tags.sh
+# shellcheck source=src/lib/valid-inspect.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-inspect.sh
 
 source /usr/share/makepkg/util/config.sh
 source /usr/share/makepkg/util/message.sh
 
-set -e
-set -o pipefail
+set -eo pipefail
 
 
 pkgctl_build_usage() {
@@ -42,19 +49,24 @@ pkgctl_build_usage() {
 
 		BUILD OPTIONS
 		    --arch ARCH          Specify architectures to build for (disables auto-detection)
-		    --repo REPO          Specify a target repository (disables auto-detection)
+		    --repo REPO          Specify target repository for new packages not in any official repo
 		    -s, --staging        Build against the staging counterpart of the auto-detected repo
 		    -t, --testing        Build against the testing counterpart of the auto-detected repo
 		    -o, --offload        Build on a remote server and transfer artifacts afterwards
 		    -c, --clean          Recreate the chroot before building
-		    -I, --install FILE   Install a package into the working copy of the chroot
+		    --inspect WHEN       Spawn an interactive shell to inspect the chroot (never, always, failure)
 		    -w, --worker SLOT    Name of the worker slot, useful for concurrent builds (disables automatic names)
 		    --nocheck            Do not run the check() function in the PKGBUILD
 
+		INSTALL OPTIONS
+		    -I, --install-to-chroot FILE   Install a package to the working copy of the chroot
+		    -i, --install-to-host MODE     Install the built package to the host system, possible modes are 'all' and 'auto'
+
 		PKGBUILD OPTIONS
 		    --pkgver=PKGVER      Set pkgver, reset pkgrel and update checksums
 		    --pkgrel=PKGREL      Set pkgrel to a given value
 		    --rebuild            Increment the current pkgrel variable
+		    --update-checksums   Force computation and update of the checksums (disables auto-detection)
 		    -e, --edit           Edit the PKGBUILD before building
 
 		RELEASE OPTIONS
@@ -77,8 +89,7 @@ pkgctl_build_check_option_group_repo() {
 	local repo=$2
 	local testing=$3
 	local staging=$4
-	if ( (( testing )) && (( staging )) ) ||
-		( [[ $repo =~ ^.*-(staging|testing)$ ]] && ( (( testing )) || (( staging )) )); then
+	if [[ -n "${repo}" ]] || (( testing )) || (( staging )); then
 		die "The argument '%s' cannot be used with one or more of the other specified arguments" "${option}"
 		exit 1
 	fi
@@ -104,7 +115,7 @@ pkgctl_build() {
 		exit 1
 	fi
 
-	local UPDPKGSUMS=0
+	local UPDATE_CHECKSUMS=0
 	local EDIT=0
 	local REBUILD=0
 	local OFFLOAD=0
@@ -112,6 +123,7 @@ pkgctl_build() {
 	local TESTING=0
 	local RELEASE=0
 	local DB_UPDATE=0
+	local INSTALL_TO_HOST=none
 
 	local REPO=
 	local PKGVER=
@@ -124,12 +136,13 @@ pkgctl_build() {
 	local MAKECHROOT_OPTIONS=()
 	local RELEASE_OPTIONS=()
 	local MAKEPKG_OPTIONS=()
+	local INSTALL_HOST_PACKAGES=()
 
 	local WORKER=
 	local WORKER_SLOT=
 
 	# variables
-	local path pkgbase pkgrepo source
+	local _arch path pkgbase pkgrepo source pkgbuild_checksum current_checksum
 
 	while (( $# )); do
 		case $1 in
@@ -139,18 +152,19 @@ pkgctl_build() {
 				;;
 			--repo)
 				(( $# <= 1 )) && die "missing argument for %s" "$1"
-				REPO="${2}"
 				pkgctl_build_check_option_group_repo '--repo' "${REPO}" "${TESTING}" "${STAGING}"
+				REPO="${2}"
+				RELEASE_OPTIONS+=("--repo" "${REPO}")
 				shift 2
 				;;
 			--arch)
 				(( $# <= 1 )) && die "missing argument for %s" "$1"
 				if [[ ${2} == all ]]; then
-					BUILD_ARCH=("${_arch[@]::${#_arch[@]}-1}")
+					BUILD_ARCH=("${DEVTOOLS_VALID_ARCHES[@]::${#DEVTOOLS_VALID_ARCHES[@]}-1}")
 				elif [[ ${2} == any ]]; then
-					BUILD_ARCH=("${_arch[0]}")
+					BUILD_ARCH=("${DEVTOOLS_VALID_ARCHES[0]}")
 				elif ! in_array "${2}" "${BUILD_ARCH[@]}"; then
-					if ! in_array "${2}" "${_arch[@]}"; then
+					if ! in_array "${2}" "${DEVTOOLS_VALID_ARCHES[@]}"; then
 						die 'invalid architecture: %s' "${2}"
 					fi
 					BUILD_ARCH+=("${2}")
@@ -161,7 +175,7 @@ pkgctl_build() {
 				pkgctl_build_check_option_group_ver '--pkgver' "${PKGVER}" "${PKGREL}" "${REBUILD}"
 				PKGVER="${1#*=}"
 				PKGREL=1
-				UPDPKGSUMS=1
+				UPDATE_CHECKSUMS=1
 				shift
 				;;
 			--pkgrel=*)
@@ -169,6 +183,10 @@ pkgctl_build() {
 				PKGREL="${1#*=}"
 				shift
 				;;
+			--update-checksums)
+				UPDATE_CHECKSUMS=1
+				shift
+				;;
 			--rebuild)
 				# shellcheck source=src/lib/util/git.sh
 				source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/git.sh
@@ -185,23 +203,37 @@ pkgctl_build() {
 				shift
 				;;
 			-s|--staging)
-				STAGING=1
 				pkgctl_build_check_option_group_repo '--staging' "${REPO}" "${TESTING}" "${STAGING}"
+				STAGING=1
+				RELEASE_OPTIONS+=("--staging")
 				shift
 				;;
 			-t|--testing)
-				TESTING=1
 				pkgctl_build_check_option_group_repo '--testing' "${REPO}" "${TESTING}" "${STAGING}"
+				TESTING=1
+				RELEASE_OPTIONS+=("--testing")
 				shift
 				;;
 			-c|--clean)
 				BUILD_OPTIONS+=("-c")
 				shift
 				;;
-			-I|--install)
+			-I|--install-to-chroot)
 				(( $# <= 1 )) && die "missing argument for %s" "$1"
-				MAKECHROOT_OPTIONS+=("-I" "$2")
-				warning 'installing packages into the chroot may break reproducible builds, use with caution!'
+				if (( OFFLOAD )); then
+					MAKECHROOT_OPTIONS+=("-I" "$2")
+				else
+					MAKECHROOT_OPTIONS+=("-I" "$(realpath "$2")")
+				fi
+				warning 'installing packages to the chroot may break reproducible builds, use with caution!'
+				shift 2
+				;;
+			-i|--install-to-host)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! in_array "$2" "${DEVTOOLS_VALID_BUILD_INSTALL[@]}"; then
+					die 'invalid install mode: %s' "${2}"
+				fi
+				INSTALL_TO_HOST=$2
 				shift 2
 				;;
 			--nocheck)
@@ -209,6 +241,14 @@ pkgctl_build() {
 				warning 'not running checks is disallowed for official packages, except for bootstrapping. Please rebuild after bootstrapping is completed!'
 				shift
 				;;
+			--inspect)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! in_array "${2}" "${DEVTOOLS_VALID_INSPECT_MODES[@]}"; then
+					die "Invalid inspect mode: %s" "${2}"
+				fi
+				MAKECHROOT_OPTIONS+=("-x" "${2}")
+				shift 2
+				;;
 			-r|--release)
 				# shellcheck source=src/lib/release.sh
 				source "${_DEVTOOLS_LIBRARY_DIR}"/lib/release.sh
@@ -274,7 +314,7 @@ pkgctl_build() {
 	if [[ -z ${REPO} ]]; then
 		update_pacman_repo_cache
 	# Check valid repos if not resolved dynamically
-	elif ! in_array "${REPO}" "${_repos[@]}"; then
+	elif ! in_array "${REPO}" "${DEVTOOLS_VALID_REPOS[@]}"; then
 		die "Invalid repository target: %s" "${REPO}"
 	fi
 
@@ -290,18 +330,32 @@ pkgctl_build() {
 		. ./PKGBUILD
 		pkgbase=${pkgbase:-$pkgname}
 		pkgrepo=${REPO}
+		pkgbuild_checksum=$(b2sum PKGBUILD | awk '{print $1}')
 		msg "Building ${pkgbase}"
 
-		# auto-detection of build target
-		if [[ -z ${pkgrepo} ]]; then
-			if ! pkgrepo=$(get_pacman_repo_from_pkgbuild PKGBUILD); then
-				die 'failed to get pacman repo'
-			fi
-			if [[ -z "${pkgrepo}" ]]; then
-				die 'unknown repo, please specify --repo for new packages'
+		# auto-detect target repository
+		if ! repo=$(get_pacman_repo_from_pkgbuild PKGBUILD); then
+			die 'Failed to query pacman repo'
+		fi
+
+		# fail if an existing package specifies --repo
+		if [[ -n "${repo}" ]] && [[ -n ${pkgrepo} ]]; then
+			# allow unstable to use --repo
+			if [[ ${pkgrepo} == *unstable ]]; then
+				repo=${pkgrepo}
+			else
+				die 'Using --repo for packages that exist in official repositories is disallowed'
 			fi
 		fi
 
+		# assign auto-detected target repository
+		if [[ -n ${repo} ]]; then
+			pkgrepo=${repo}
+		# fallback to extra for unreleased packages
+		elif [[ -z ${pkgrepo} ]]; then
+			pkgrepo=extra
+		fi
+
 		# special cases to resolve final build target
 		if (( TESTING )); then
 			pkgrepo="${pkgrepo}-testing"
@@ -316,9 +370,15 @@ pkgctl_build() {
 			BUILD_ARCH=("")
 		elif (( ${#BUILD_ARCH[@]} == 0 )); then
 			if in_array any "${arch[@]}"; then
-				BUILD_ARCH=("${_arch[0]}")
+				BUILD_ARCH=("${DEVTOOLS_VALID_ARCHES[0]}")
 			else
-				BUILD_ARCH+=("${arch[@]}")
+				for _arch in "${arch[@]}"; do
+					if in_array "${_arch}" "${DEVTOOLS_VALID_ARCHES[@]}"; then
+						BUILD_ARCH+=("$_arch")
+					else
+						warning 'invalid architecture, not building for: %s' "${_arch}"
+					fi
+				done
 			fi
 		fi
 
@@ -329,7 +389,7 @@ pkgctl_build() {
 
 		# increment pkgrel on rebuild
 		if (( REBUILD )); then
-			# try to figure out of pkgrel has been changed
+			# try to figure out if pkgrel has been changed
 			if ! old_pkgrel=$(git_diff_tree HEAD PKGBUILD | grep --perl-regexp --only-matching --max-count=1 '^-pkgrel=\K\w+'); then
 				old_pkgrel=${pkgrel}
 			fi
@@ -346,20 +406,14 @@ pkgctl_build() {
 
 		# update pkgver
 		if [[ -n ${PKGVER} ]]; then
-			if [[ $(type -t pkgver) == function ]]; then
-				# TODO: check if die or warn, if we provide _commit _gitcommit setter maybe?
-				warning 'setting pkgver variable has no effect if the PKGBUILD has a pkgver() function'
-			fi
 			msg "Bumping pkgver to ${PKGVER}"
-			grep --extended-regexp --quiet --max-count=1 "^pkgver=${pkgver}$" PKGBUILD || die "Non-standard pkgver declaration"
-			sed --regexp-extended "s|^(pkgver=)${pkgver}$|\1${PKGVER}|g" -i PKGBUILD
+			pkgbuild_set_pkgver "${PKGVER}"
 		fi
 
 		# update pkgrel
 		if [[ -n ${PKGREL} ]]; then
 			msg "Bumping pkgrel to ${PKGREL}"
-			grep --extended-regexp --quiet --max-count=1 "^pkgrel=${pkgrel}$" PKGBUILD || die "Non-standard pkgrel declaration"
-			sed --regexp-extended "s|^(pkgrel=)${pkgrel}$|\1${PKGREL}|g" -i PKGBUILD
+			pkgbuild_set_pkgrel "${PKGREL}"
 		fi
 
 		# edit PKGBUILD
@@ -381,10 +435,18 @@ pkgctl_build() {
 
 
 		# update checksums if any sources are declared
-		if (( UPDPKGSUMS )) && (( ${#source[@]} >= 1 )); then
+		if (( UPDATE_CHECKSUMS )) && (( ${#source[@]} >= 1 )); then
 			updpkgsums
 		fi
 
+		# re-source the PKGBUILD if it changed
+		current_checksum="$(b2sum PKGBUILD | awk '{print $1}')"
+		if [[ ${pkgbuild_checksum} != "${current_checksum}" ]]; then
+			pkgbuild_checksum=${current_checksum}
+			# shellcheck source=contrib/makepkg/PKGBUILD.proto
+			. ./PKGBUILD
+		fi
+
 		# execute build
 		for arch in "${BUILD_ARCH[@]}"; do
 			if [[ -n $arch ]]; then
@@ -402,9 +464,41 @@ pkgctl_build() {
 			fi
 		done
 
+		# re-source the PKGBUILD if it changed
+		current_checksum="$(b2sum PKGBUILD | awk '{print $1}')"
+		if [[ ${pkgbuild_checksum} != "${current_checksum}" ]]; then
+			pkgbuild_checksum=${current_checksum}
+			# shellcheck source=contrib/makepkg/PKGBUILD.proto
+			. ./PKGBUILD
+		fi
+
+		# auto generate .SRCINFO
+		# shellcheck disable=SC2119
+		write_srcinfo_file
+
+		# test-install (some of) the produced packages
+		if [[ ${INSTALL_TO_HOST} == auto ]] || [[ ${INSTALL_TO_HOST} == all ]]; then
+			# shellcheck disable=2119
+			load_makepkg_config
+
+			# this is inspired by print_all_package_names from libmakepkg
+			local version pkg_architecture pkg pkgfile
+			version=$(get_full_version)
+
+			for pkg in "${pkgname[@]}"; do
+				pkg_architecture=$(get_pkg_arch "$pkg")
+				pkgfile=$(realpath "$(printf "%s/%s-%s-%s%s\n" "${PKGDEST:-.}" "$pkg" "$version" "$pkg_architecture" "$PKGEXT")")
+
+				# check if we install all packages or if the (split-)package is already installed
+				if [[ ${INSTALL_TO_HOST} == all ]] || ( [[ ${INSTALL_TO_HOST} == auto ]] && pacman -Qq -- "$pkg" &>/dev/null ); then
+					INSTALL_HOST_PACKAGES+=("$pkgfile")
+				fi
+			done
+		fi
+
 		# release the build
 		if (( RELEASE )); then
-			pkgctl_release --repo "${pkgrepo}" "${RELEASE_OPTIONS[@]}"
+			pkgctl_release "${RELEASE_OPTIONS[@]}"
 		fi
 
 		# reset common PKGBUILD variables
@@ -412,6 +506,12 @@ pkgctl_build() {
 		popd >/dev/null
 	done
 
+	# install all collected packages to the host system
+	if (( ${#INSTALL_HOST_PACKAGES[@]} )); then
+		msg "Installing built packages to the host system"
+		sudo pacman -U -- "${INSTALL_HOST_PACKAGES[@]}"
+	fi
+
 	# update the binary package repo db as last action
 	if (( RELEASE )) && (( DB_UPDATE )); then
 		# shellcheck disable=2119

src/lib/cache.sh

@@ -0,0 +1,22 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_CACHE_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_CACHE_SH=1
+
+set -e
+
+readonly XDG_DEVTOOLS_CACHE_DIR="${XDG_CACHE_HOME:-$HOME/.cache}/devtools"
+
+get_cache_file() {
+	local filename=$1
+	local path="${XDG_DEVTOOLS_CACHE_DIR}/${filename}"
+
+	mkdir --parents -- "$(dirname -- "$path")"
+	if [[ ! -f ${path} ]]; then
+		touch -- "${path}"
+	fi
+
+	printf '%s' "${path}"
+}

src/lib/common.sh

@@ -13,7 +13,7 @@ set +u +o posix
 $DEVTOOLS_INCLUDE_COMMON_SH
 
 # Avoid any encoding problems
-export LANG=C
+export LANG=C.UTF-8
 
 # Set buildtool properties
 export BUILDTOOL=devtools
@@ -22,19 +22,33 @@ export BUILDTOOLVER=@buildtoolver@
 # Set common properties
 export PACMAN_KEYRING_DIR=/etc/pacman.d/gnupg
 export GITLAB_HOST=gitlab.archlinux.org
-export GIT_REPO_SPEC_VERSION=1
+export GIT_REPO_SPEC_VERSION=2
 export GIT_PACKAGING_NAMESPACE=archlinux/packaging/packages
 export GIT_PACKAGING_NAMESPACE_ID=11323
 export GIT_PACKAGING_URL_SSH="git@${GITLAB_HOST}:${GIT_PACKAGING_NAMESPACE}"
 export GIT_PACKAGING_URL_HTTPS="https://${GITLAB_HOST}/${GIT_PACKAGING_NAMESPACE}"
 export PACKAGING_REPO_RELEASE_HOST=repos.archlinux.org
+export PKGBASE_MAINTAINER_URL=https://archlinux.org/packages/pkgbase-maintainer
+export AUR_URL_SSH=aur@aur.archlinux.org
+
+# ensure TERM is set with a fallback to dumb
+export TERM=${TERM:-dumb}
 
 # check if messages are to be printed using color
 if [[ -t 2 && "$TERM" != dumb ]] || [[ ${DEVTOOLS_COLOR} == always ]]; then
 	colorize
+	if tput setaf 0 &>/dev/null; then
+		PURPLE="$(tput setaf 5)"
+		DARK_GREEN="$(tput setaf 2)"
+		UNDERLINE="$(tput smul)"
+	else
+		PURPLE="\e[35m"
+		DARK_GREEN="\e[32m"
+		UNDERLINE="\e[4m"
+	fi
 else
 	# shellcheck disable=2034
-	declare -gr ALL_OFF='' BOLD='' BLUE='' GREEN='' RED='' YELLOW=''
+	declare -gr ALL_OFF='' BOLD='' BLUE='' GREEN='' RED='' YELLOW='' PURPLE='' DARK_GREEN='' UNDERLINE=''
 fi
 
 stat_busy() {
@@ -53,6 +67,11 @@ stat_done() {
 	printf "${BOLD}done${ALL_OFF}\n" >&2
 }
 
+stat_failed() {
+	# shellcheck disable=2059
+	printf "${BOLD}${RED}failed${ALL_OFF}\n" >&2
+}
+
 msg_success() {
 	local msg=$1
 	local padding
@@ -77,6 +96,15 @@ msg_warn() {
 	printf "%s %s\n" "${padding}${YELLOW}!${ALL_OFF}" "${msg}" >&2
 }
 
+print_workdir_error() {
+	if [[ ! -f "${WORKDIR}"/error ]]; then
+		return
+	fi
+	while read -r LINE; do
+		error '%s' "${LINE}"
+	done < "${WORKDIR}/error"
+}
+
 _setup_workdir=false
 setup_workdir() {
 	[[ -z ${WORKDIR:-} ]] && WORKDIR=$(mktemp -d --tmpdir "${0##*/}.XXXXXXXXXX")
@@ -89,6 +117,9 @@ cleanup() {
 	if [[ -n ${WORKDIR:-} ]] && $_setup_workdir; then
 		rm -rf "$WORKDIR"
 	fi
+	if tput setaf 0 &>/dev/null; then
+		tput cnorm >&2
+	fi
 	exit "${1:-0}"
 }
 
@@ -120,7 +151,7 @@ lock() {
 	# Only reopen the FD if it wasn't handed to us
 	if ! [[ "/dev/fd/$1" -ef "$2" ]]; then
 		mkdir -p -- "$(dirname -- "$2")"
-		eval "exec $1>"'"$2"'
+		eval "exec $1>>"'"$2"'
 	fi
 
 	if ! flock -n "$1"; then

src/lib/db.sh

@@ -15,7 +15,7 @@ pkgctl_db_usage() {
 	cat <<- _EOF_
 		Usage: ${COMMAND} [COMMAND] [OPTIONS]
 
-		Pacman database modification for packge update, move etc
+		Pacman database modification for package update, move etc
 
 		COMMANDS
 		    move      Move packages between pacman repositories

src/lib/release.sh

@@ -35,7 +35,7 @@ pkgctl_release_usage() {
 
 		OPTIONS
 		    -m, --message MSG   Use the given <msg> as the commit message
-		    -r, --repo REPO     Specify a target repository (disables auto-detection)
+		    -r, --repo REPO     Specify target repository for new packages not in any official repo
 		    -s, --staging       Release to the staging counterpart of the auto-detected repo
 		    -t, --testing       Release to the testing counterpart of the auto-detected repo
 		    -u, --db-update     Automatically update the pacman database after uploading
@@ -43,8 +43,8 @@ pkgctl_release_usage() {
 
 		EXAMPLES
 		    $ ${COMMAND}
-		    $ ${COMMAND} --repo core-testing --message 'libyay 0.42 rebuild' libfoo libbar
-		    $ ${COMMAND} --staging --db-update libfoo
+		    $ ${COMMAND} --staging --message 'libyay 0.42 rebuild' libfoo libbar
+		    $ ${COMMAND} --repo extra --db-update new-package
 _EOF_
 }
 
@@ -126,7 +126,7 @@ pkgctl_release() {
 	if [[ -z ${REPO} ]]; then
 		update_pacman_repo_cache
 	# Check valid repos if not resolved dynamically
-	elif ! in_array "${REPO}" "${_repos[@]}"; then
+	elif ! in_array "${REPO}" "${DEVTOOLS_VALID_REPOS[@]}"; then
 		die "Invalid repository target: %s" "${REPO}"
 	fi
 
@@ -134,15 +134,27 @@ pkgctl_release() {
 		pushd "${path}" >/dev/null
 		pkgbase=$(basename "${path}")
 
-		if [[ -n ${REPO} ]]; then
+		# auto-detect target repository
+		if ! repo=$(get_pacman_repo_from_pkgbuild PKGBUILD); then
+			die 'Failed to query pacman repo'
+		fi
+
+		# fail if an existing package specifies --repo
+		if [[ -n "${repo}" ]] && [[ -n ${REPO} ]]; then
+			# allow unstable to use --repo
+			if [[ ${REPO} == *unstable ]]; then
+				repo=${REPO}
+			else
+				die 'Using --repo for packages that exist in official repositories is disallowed'
+			fi
+		fi
+
+		# fail if a new package does not specify --repo
+		if [[ -z "${repo}" ]]; then
+			if [[ -z ${REPO} ]]; then
+				die 'Specify --repo for packages that do not yet exist in official repositories'
+			fi
 			repo=${REPO}
-		else
-			if ! repo=$(get_pacman_repo_from_pkgbuild PKGBUILD); then
-				die 'Failed to get pacman repo'
-			fi
-			if [[ -z "${repo}" ]]; then
-				die 'Unknown repo, please specify --repo for new packages'
-			fi
 		fi
 
 		if (( TESTING )); then

src/lib/repo/clone.sh

@@ -8,14 +8,19 @@ DEVTOOLS_INCLUDE_REPO_CLONE_SH=1
 _DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
 # shellcheck source=src/lib/common.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/api/archweb.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/api/archweb.sh
 # shellcheck source=src/lib/api/gitlab.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/api/gitlab.sh
 # shellcheck source=src/lib/repo/configure.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/repo/configure.sh
+# shellcheck source=src/lib/util/git.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/git.sh
 
 source /usr/share/makepkg/util/message.sh
 
 set -e
+set -o pipefail
 
 
 pkgctl_repo_clone_usage() {
@@ -26,12 +31,13 @@ pkgctl_repo_clone_usage() {
 		Clone Git packaging repositories from the canonical namespace.
 
 		The configure command is subsequently invoked to synchronize the distro
-		specs and makepkg.conf settings. The unprivileged option can be used
+		specs and makepkg.conf settings. The protocol option can be used
 		for cloning packaging repositories without SSH access using read-only
 		HTTPS.
 
 		OPTIONS
 		    -m, --maintainer=NAME  Clone all packages of the named maintainer
+		    --protocol https       Clone the repository over https
 		    --switch VERSION       Switch the current working tree to a specified version
 		    --universe             Clone all existing packages, useful for cache warming
 		    -j, --jobs N           Run up to N jobs in parallel (default: $(nproc))
@@ -51,6 +57,7 @@ pkgctl_repo_clone() {
 	fi
 
 	# options
+	local protocol=ssh
 	local GIT_REPO_BASE_URL=${GIT_PACKAGING_URL_SSH}
 	local CLONE_ALL=0
 	local MAINTAINER=
@@ -69,11 +76,23 @@ pkgctl_repo_clone() {
 				pkgctl_repo_clone_usage
 				exit 0
 				;;
-			-u|--unprivileged)
+			--protocol=https)
 				GIT_REPO_BASE_URL=${GIT_PACKAGING_URL_HTTPS}
+				protocol=https
 				CONFIGURE_OPTIONS+=("$1")
 				shift
 				;;
+			--protocol)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if [[ $2 == https ]]; then
+					GIT_REPO_BASE_URL=${GIT_PACKAGING_URL_HTTPS}
+				else
+					die "unsupported protocol: %s" "$2"
+				fi
+				protocol="$2"
+				CONFIGURE_OPTIONS+=("$1" "$2")
+				shift 2
+				;;
 			-m|--maintainer)
 				(( $# <= 1 )) && die "missing argument for %s" "$1"
 				MAINTAINER="$2"
@@ -121,33 +140,18 @@ pkgctl_repo_clone() {
 
 	# Query packages of a maintainer
 	if [[ -n ${MAINTAINER} ]]; then
-		stat_busy "Query packages"
-		max_pages=$(curl --silent --location --fail --retry 3 --retry-delay 3 "https://archlinux.org/packages/search/json/?sort=name&maintainer=${MAINTAINER}" | jq -r '.num_pages')
-		if [[ ! ${max_pages} =~ ([[:digit:]]) ]]; then
-			stat_done
-			warning "found no packages for maintainer ${MAINTAINER}"
-			exit 0
+		mapfile -t pkgbases < <(archweb_query_maintainer_packages "${MAINTAINER}")
+		if ! wait $!; then
+			die "Failed to query maintainer packages"
 		fi
-		mapfile -t pkgbases < <(for page in $(seq "${max_pages}"); do
-			curl --silent --location --fail --retry 3 --retry-delay 3 "https://archlinux.org/packages/search/json/?sort=name&maintainer=${MAINTAINER}&page=${page}" | jq -r '.results[].pkgbase'
-			stat_progress
-		done | sort --unique)
-		stat_done
 	fi
 
 	# Query all released packages
 	if (( CLONE_ALL )); then
-		stat_busy "Query all released packages"
-		max_pages=$(curl --silent --location --fail --retry 3 --retry-delay 3 "https://archlinux.org/packages/search/json/?sort=name" | jq -r '.num_pages')
-		if [[ ! ${max_pages} =~ ([[:digit:]]) ]]; then
-			stat_done
-			die "failed to query packages"
+		mapfile -t pkgbases < <(archweb_query_all_packages)
+		if ! wait $!; then
+			die "Failed to query all packages"
 		fi
-		mapfile -t pkgbases < <(for page in $(seq "${max_pages}"); do
-			curl --silent --location --fail --retry 3 --retry-delay 3 "https://archlinux.org/packages/search/json/?sort=name&page=${page}" | jq -r '.results[].pkgbase'
-			stat_progress
-		done | sort --unique)
-		stat_done
 	fi
 
 	# parallelization
@@ -160,6 +164,12 @@ pkgctl_repo_clone() {
 		if [[ -n "${VERSION}" ]]; then
 			command+=" --switch '${VERSION}'"
 		fi
+
+		# warm up ssh connection as it may require user input (key unlock, hostkey verification etc)
+		if [[ ${protocol} == ssh ]]; then
+			git_warmup_ssh_connection
+		fi
+
 		if ! parallel --bar --jobs "${jobs}" "${command}" ::: "${pkgbases[@]}"; then
 			die 'Failed to clone some packages, please check the output'
 			exit 1

src/lib/repo/configure.sh

@@ -10,11 +10,14 @@ _DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
 # shellcheck source=src/lib/api/gitlab.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/api/gitlab.sh
+# shellcheck source=src/lib/util/git.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/git.sh
 
 source /usr/share/makepkg/util/config.sh
 source /usr/share/makepkg/util/message.sh
 
 set -e
+shopt -s nullglob
 
 
 pkgctl_repo_configure_usage() {
@@ -32,12 +35,15 @@ pkgctl_repo_configure_usage() {
 		address by choosing SSH for all official packager identities and
 		read-only HTTPS otherwise.
 
+		Git default excludes and hooks are applied to the configured repo.
+
 		OPTIONS
+		    --protocol https     Configure remote url to use https
 		    -j, --jobs N         Run up to N jobs in parallel (default: $(nproc))
 		    -h, --help           Show this help text
 
 		EXAMPLES
-		    $ ${COMMAND} configure *
+		    $ ${COMMAND} *
 _EOF_
 }
 
@@ -94,13 +100,14 @@ pkgctl_repo_configure() {
 	local GIT_REPO_BASE_URL=${GIT_PACKAGING_URL_HTTPS}
 	local official=0
 	local proto=https
+	local proto_force=0
 	local jobs=
 	jobs=$(nproc)
 	local paths=()
 
 	# variables
 	local -r command=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
-	local path realpath pkgbase remote_url project_path
+	local path realpath pkgbase remote_url project_path hook
 	local PACKAGER GPGKEY packager_name packager_email
 
 	while (( $# )); do
@@ -109,6 +116,19 @@ pkgctl_repo_configure() {
 				pkgctl_repo_configure_usage
 				exit 0
 				;;
+			--protocol=https)
+				proto_force=1
+				shift
+				;;
+			--protocol)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if [[ $2 == https ]]; then
+					proto_force=1
+				else
+					die "unsupported protocol: %s" "$2"
+				fi
+				shift 2
+				;;
 			-j|--jobs)
 				(( $# <= 1 )) && die "missing argument for %s" "$1"
 				jobs=$2
@@ -152,8 +172,10 @@ pkgctl_repo_configure() {
 		fi
 		if is_packager_email_official "${packager_email}"; then
 			official=1
-			proto=ssh
-			GIT_REPO_BASE_URL=${GIT_PACKAGING_URL_SSH}
+			if (( ! proto_force )); then
+				proto=ssh
+				GIT_REPO_BASE_URL=${GIT_PACKAGING_URL_SSH}
+			fi
 		fi
 	fi
 
@@ -171,6 +193,12 @@ pkgctl_repo_configure() {
 		if [[ -n ${BOLD} ]]; then
 			export DEVTOOLS_COLOR=always
 		fi
+
+		# warm up ssh connection as it may require user input (key unlock, hostkey verification etc)
+		if [[ ${proto} == ssh ]]; then
+			git_warmup_ssh_connection
+		fi
+
 		if ! parallel --bar --jobs "${jobs}" "${command}" ::: "${paths[@]}"; then
 			die 'Failed to configure some packages, please check the output'
 			exit 1
@@ -205,7 +233,15 @@ pkgctl_repo_configure() {
 			git config branch.main.merge refs/heads/main
 		fi
 
+		# configure spec version and variant to avoid using development hooks in production
 		git config devtools.version "${GIT_REPO_SPEC_VERSION}"
+		if [[ ${_DEVTOOLS_LIBRARY_DIR} == /usr/share/devtools ]]; then
+			git config devtools.variant canonical
+		else
+			warning "Configuring with development version of pkgctl, do not use this repo in production"
+			git config devtools.variant development
+		fi
+
 		git config pull.rebase true
 		git config branch.autoSetupRebase always
 		git config branch.main.remote origin
@@ -232,6 +268,18 @@ pkgctl_repo_configure() {
 			git config user.signingKey "${GPGKEY}"
 		fi
 
+		# set default git exclude
+		mkdir -p .git/info
+		ln -sf "${_DEVTOOLS_LIBRARY_DIR}/git.conf.d/template/info/exclude" \
+			.git/info/exclude
+
+		# set default git hooks
+		mkdir -p .git/hooks
+		rm -f .git/hooks/*.sample
+		for hook in "${_DEVTOOLS_LIBRARY_DIR}"/git.conf.d/template/hooks/*; do
+			ln -sf "${hook}" ".git/hooks/$(basename "${hook}")"
+		done
+
 		if ! git ls-remote origin &>/dev/null; then
 			warning "configured remote origin may not exist, run:"
 			msg2 "pkgctl repo create ${pkgbase}"

src/lib/repo/web.sh

@@ -23,16 +23,18 @@ pkgctl_repo_web_usage() {
 		no arguments, open the package cloned in the current working directory.
 
 		OPTIONS
+		    --print       Print the url instead of opening it with xdg-open
 		    -h, --help    Show this help text
 
 		EXAMPLES
-		    $ ${COMMAND} web linux
+		    $ ${COMMAND} linux
 _EOF_
 }
 
 pkgctl_repo_web() {
 	local pkgbases=()
-	local path giturl pkgbase
+	local path giturl pkgbase url
+	local mode=open
 
 	# option checking
 	while (( $# )); do
@@ -41,6 +43,10 @@ pkgctl_repo_web() {
 				pkgctl_repo_web_usage
 				exit 0
 				;;
+			--print)
+				mode=print
+				shift
+				;;
 			--)
 				shift
 				break
@@ -56,7 +62,7 @@ pkgctl_repo_web() {
 	done
 
 	# Check if web mode has xdg-open
-	if ! command -v xdg-open &>/dev/null; then
+	if [[ ${mode} == open ]] && ! command -v xdg-open &>/dev/null; then
 		die "The web command requires 'xdg-open'"
 	fi
 
@@ -78,7 +84,18 @@ pkgctl_repo_web() {
 	fi
 
 	for pkgbase in "${pkgbases[@]}"; do
+		pkgbase=$(basename "${pkgbase}")
 		path=$(gitlab_project_name_to_path "${pkgbase}")
-		xdg-open "${GIT_PACKAGING_URL_HTTPS}/${path}"
+		url="${GIT_PACKAGING_URL_HTTPS}/${path}"
+		case ${mode} in
+			open)
+				xdg-open "${url}"
+				;;
+			print)
+				printf "%s\n" "${url}"
+				;;
+			*)
+				die "Unknown mode: ${mode}"
+		esac
 	done
 }

src/lib/search.sh

@@ -0,0 +1,308 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_SEARCH_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_SEARCH_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/cache.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/cache.sh
+# shellcheck source=src/lib/api/gitlab.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/api/gitlab.sh
+# shellcheck source=src/lib/valid-search.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-search.sh
+# shellcheck source=src/lib/util/term.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/term.sh
+
+source /usr/share/makepkg/util/util.sh
+source /usr/share/makepkg/util/message.sh
+
+set -eo pipefail
+
+
+pkgctl_search_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+	cat <<- _EOF_
+		Usage: ${COMMAND} [OPTIONS] QUERY
+
+		Search for an expression across the GitLab packaging group.
+
+		To use a filter, include it in your query. You may use wildcards (*) to
+		use glob matching.
+
+		Available filters for the blobs scope: path, extension
+
+		Every usage of the search command must be authenticated. Consult the
+		'pkgctl auth' command to authenticate with GitLab or view the
+		authentication status.
+
+		SEARCH TIPS
+		    Syntax  Description    Example
+		    ───────────────────────────────────────
+		    "       Exact search   "gem sidekiq"
+		    ~       Fuzzy search   J~ Doe
+		    |       Or             display | banner
+		    +       And            display +banner
+		    -       Exclude        display -banner
+		    *       Partial        bug error 50*
+		    \\       Escape         \\*md
+		    #       Issue ID       #23456
+		    !       Merge request  !23456
+
+		OPTIONS
+		    -h, --help            Show this help text
+
+		FILTER OPTIONS
+		    --no-default-filter   Do not apply default filter (like -path:keys/pgp/*.asc)
+
+		OUTPUT OPTIONS
+		    --json                Enable printing in JSON; Shorthand for '--format json'
+		    -F, --format FORMAT   Controls the formatting of the results; FORMAT is 'pretty',
+		                          'plain', or 'json' (default: pretty)
+		    -N, --no-line-number  Don't show line numbers when formatting results
+
+		EXAMPLES
+		    $ ${COMMAND} linux
+		    $ ${COMMAND} --json '"pytest -v" +PYTHONPATH'
+_EOF_
+}
+
+pkgctl_search_check_option_group_format() {
+	local option=$1
+	local output_format=$2
+	if [[ -n ${output_format} ]]; then
+		die "The argument '%s' cannot be used with one or more of the other specified arguments" "${option}"
+		exit 1
+	fi
+	return 0
+}
+
+pkgctl_search() {
+	if (( $# < 1 )); then
+		pkgctl_search_usage
+		exit 0
+	fi
+
+	# options
+	local search
+	local output_format=
+	local use_default_filter=1
+	local line_numbers=1
+
+	# variables
+	local bat_style="header,grid"
+	local default_filter="-path:keys/pgp/*.asc"
+	local graphql_lookup_batch=200
+	local output result query entries from until length
+	local project_name_cache_file project_name_lookup project_ids project_id project_name project_slice
+	local mapping_output path startline currentline data line
+
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_search_usage
+				exit 0
+				;;
+			--no-default-filter)
+				use_default_filter=0
+				shift
+				;;
+			--json)
+				pkgctl_search_check_option_group_format "$1" "${output_format}"
+				output_format=json
+				shift
+				;;
+			-F|--format)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				pkgctl_search_check_option_group_format "$1" "${output_format}"
+				output_format="${2}"
+				if ! in_array "${output_format}" "${valid_search_output_format[@]}"; then
+					die "Unknown output format: %s" "${output_format}"
+				fi
+				shift 2
+				;;
+			-N|--no-line-number)
+				line_numbers=0
+				shift
+				;;
+			--)
+				shift
+				break
+				;;
+			-*)
+				die "invalid argument: %s" "$1"
+				;;
+			*)
+				break
+				;;
+		esac
+	done
+
+	if (( $# == 0 )); then
+		pkgctl_search_usage
+		exit 1
+	fi
+
+	# assign search parameter
+	search="${*}"
+	if (( use_default_filter )); then
+		search+=" ${default_filter}"
+	fi
+
+	# assign default output format
+	if [[ -z ${output_format} ]]; then
+		output_format=pretty
+	fi
+
+	# check for optional dependencies
+	if [[ ${output_format} == pretty ]] && ! command -v bat &>/dev/null; then
+		warning "Failed to find optional dependency 'bat': falling back to plain output"
+		output_format=plain
+	fi
+
+	# populate line numbers option
+	if (( line_numbers )); then
+		bat_style="numbers,${bat_style}"
+	fi
+
+	# call the gitlab search API
+	status_dir=$(mktemp --tmpdir="${WORKDIR}" --directory pkgctl-gitlab-api.XXXXXXXXXX)
+	printf "📡 Querying GitLab search API..." > "${status_dir}/status"
+	term_spinner_start "${status_dir}"
+	output=$(gitlab_api_search "${search}" "${status_dir}/status")
+	term_spinner_stop "${status_dir}"
+	msg_success "Querying GitLab search API"
+
+	# collect project ids whose name needs to be looked up
+	project_name_cache_file=$(get_cache_file gitlab/project_id_to_name)
+	lock 11 "${project_name_cache_file}" "Locking project name cache"
+	mapfile -t project_ids < <(
+		jq --raw-output '[.[].project_id] | unique[]' <<< "${output}" | \
+			grep --invert-match --file <(awk '{ print $1 }' < "${project_name_cache_file}" ))
+
+	# look up project names
+	tmp_file=$(mktemp --tmpdir="${WORKDIR}" pkgctl-gitlab-api-spinner.tmp.XXXXXXXXXX)
+	printf "📡 Querying GitLab project names..." > "${status_dir}/status"
+	term_spinner_start "${status_dir}"
+	local entries="${#project_ids[@]}"
+	local until=0
+	while (( until < entries )); do
+		from=${until}
+		until=$(( until + graphql_lookup_batch ))
+		if (( until > entries )); then
+			until=${entries}
+		fi
+		length=$(( until - from ))
+
+		percentage=$(( 100 * until / entries ))
+		printf "📡 Querying GitLab project names: %s/%s [%s] %%spinner%%" \
+			"${BOLD}${until}" "${entries}" "${percentage}%${ALL_OFF}"  \
+			> "${tmp_file}"
+		mv "${tmp_file}" "${status_dir}/status"
+
+		project_slice=("${project_ids[@]:${from}:${length}}")
+		printf -v projects '"gid://gitlab/Project/%s",' "${project_slice[@]}"
+		query='{
+			projects(after: "" ids: ['"${projects}"']) {
+				pageInfo {
+					startCursor
+					endCursor
+					hasNextPage
+				}
+				nodes {
+					id
+					name
+				}
+			}
+		}'
+		mapping_output=$(gitlab_api_get_project_name_mapping "${query}")
+
+		# update cache
+		while read -r project_id project_name; do
+			printf "%s %s\n" "${project_id}" "${project_name}" >> "${project_name_cache_file}"
+		done < <(jq --raw-output \
+			'.[] | "\(.id | rindex("/") as $lastSlash | .[$lastSlash+1:]) \(.name)"' \
+			<<< "${mapping_output}")
+	done
+	term_spinner_stop "${status_dir}"
+	msg_success "Querying GitLab project names"
+
+	# read project_id to name mapping from cache
+	declare -A project_name_lookup=()
+	while read -r project_id project_name; do
+		project_name_lookup[${project_id}]=${project_name}
+	done < "${project_name_cache_file}"
+
+	# close project name cache lock
+	lock_close 11
+
+	# output mode JSON
+	if [[ ${output_format} == json ]]; then
+		jq --from-file <(
+			for project_id in $(jq '.[].project_id' <<< "${output}"); do
+				project_name=${project_name_lookup[${project_id}]}
+				printf 'map(if .project_id == %s then . + {"project_name": "%s"} else . end) | ' \
+					"${project_id}" "${project_name}"
+			done
+			printf .
+		) <<< "${output}"
+		exit 0
+	fi
+
+	# pretty print each result
+	while read -r result; do
+		# read properties from search result
+		mapfile -t data < <(jq --raw-output ".data" <<< "${result}")
+		{ read -r project_id; read -r path; read -r startline; } < <(
+			jq --raw-output ".project_id, .path, .startline" <<< "${result}"
+		)
+		project_name=${project_name_lookup[${project_id}]}
+
+		# remove trailing newline for multiline results
+		if (( ${#data[@]} > 1 )) && [[ ${data[-1]} == "" ]]; then
+			unset "data[${#data[@]}-1]"
+		fi
+
+		# output mode plain
+		if [[ ${output_format} == plain ]]; then
+			printf "%s%s%s\n" "${PURPLE}" "${project_name}/${path}" "${ALL_OFF}"
+
+			currentline=${startline}
+			for line in "${data[@]}"; do
+				if (( line_numbers )); then
+					line="${DARK_GREEN}${currentline}${ALL_OFF}: ${line}"
+					currentline=$(( currentline + 1 ))
+				fi
+				printf "%s\n" "${line}"
+			done
+			printf "\n"
+
+			continue
+		fi
+
+		# prepend empty lines to match startline
+		if (( startline > 1 )); then
+			mapfile -t data < <(
+				printf '%.0s\n' $(seq 1 "$(( startline - 1 ))")
+				printf "%s\n" "${data[@]}"
+			)
+		fi
+
+		bat \
+			--file-name="${project_name}/${path}" \
+			--line-range "${startline}:" \
+			--paging=never \
+			--force-colorization \
+			--style "${bat_style}" \
+			--map-syntax "PKGBUILD:Bourne Again Shell (bash)" \
+			--map-syntax ".SRCINFO:INI" \
+			--map-syntax "*install:Bourne Again Shell (bash)" \
+			--map-syntax "*sysusers*:Bourne Again Shell (bash)" \
+			--map-syntax "*tmpfiles*:Bourne Again Shell (bash)" \
+			--map-syntax "*.hook:INI" \
+			<(printf "%s\n" "${data[@]}")
+	done < <(jq --compact-output '.[]' <<< "${output}")
+}

src/lib/util/git.sh

@@ -7,6 +7,9 @@ DEVTOOLS_INCLUDE_UTIL_GIT_SH=1
 
 _DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
 
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+
 
 git_diff_tree() {
 	local commit=$1
@@ -22,3 +25,10 @@ git_diff_tree() {
 		"${commit}" \
 		-- "${path}"
 }
+
+git_warmup_ssh_connection() {
+	msg 'Establishing ssh connection to git@%s' "${GITLAB_HOST}"
+	if ! ssh -T "git@${GITLAB_HOST}" >/dev/null; then
+		die 'Failed to establish ssh connection to git@%s' "${GITLAB_HOST}"
+	fi
+}

src/lib/util/makepkg.sh

@@ -0,0 +1,37 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_UTIL_MAKEPKG_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_UTIL_MAKEPKG_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/util/srcinfo.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/srcinfo.sh
+
+
+set -e
+
+makepkg_source_package() {
+	if (( EUID != 0 )); then
+		[[ -z ${WORKDIR:-} ]] && setup_workdir
+		export WORKDIR DEVTOOLS_INCLUDE_COMMON_SH
+		fakeroot -- bash -$- -c "source '${BASH_SOURCE[0]}' && ${FUNCNAME[0]}"
+		return
+	fi
+	(
+		export LIBMAKEPKG_LINT_PKGBUILD_SH=1
+		lint_pkgbuild() { :; }
+
+		export LIBMAKEPKG_SRCINFO_SH=1
+		write_srcinfo() { print_srcinfo; }
+
+		# explicitly instruct makepkg to not sign the source package, even when
+		# the BUILDENV array in makepkg.conf contains 'sign'
+		set +e -- -F --source --nosign
+		# shellcheck source=/usr/bin/makepkg
+		source "$(command -v makepkg)"
+	)
+}

src/lib/util/pacman.sh

@@ -38,13 +38,21 @@ get_pacman_repo_from_pkgbuild() {
 		return
 	fi
 
+	# update the pacman repo cache if it doesn't exist yet
+	if [[ ! -d "${_DEVTOOLS_PACMAN_CACHE_DIR}" ]]; then
+		update_pacman_repo_cache
+	fi
+
 	slock 10 "${_DEVTOOLS_PACMAN_CACHE_DIR}.lock" "Locking pacman database cache"
+	# query repo of passed pkgname, specify --nodeps twice to skip all dependency checks
 	mapfile -t repos < <(pacman --config "${_DEVTOOLS_PACMAN_CONF_DIR}/multilib.conf" \
 		--dbpath "${_DEVTOOLS_PACMAN_CACHE_DIR}" \
-		-S \
+		--sync \
+		--nodeps \
+		--nodeps \
 		--print \
 		--print-format '%n %r' \
-		"${pkgnames[0]}" | grep -E "^${pkgnames[0]} " | awk '{print $2}'
+		"${pkgnames[0]}" 2>/dev/null | awk '$1=="'"${pkgnames[0]}"'"{print $2}'
 	)
 	lock_close 10
 

src/lib/util/pkgbuild.sh

@@ -0,0 +1,43 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_UTIL_PKGBUILD_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_UTIL_PKGBUILD_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+
+source /usr/share/makepkg/util/message.sh
+
+set -e
+
+
+# set the pkgver variable in a PKGBUILD
+# assumes that the pkgbuild is sourced to detect the presence of a pkgver function
+pkgbuild_set_pkgver() {
+	local new_pkgver=$1
+	local pkgver=${pkgver}
+
+	if [[ $(type -t pkgver) == function ]]; then
+		# TODO: check if die or warn, if we provide _commit _gitcommit setter maybe?
+		warning 'setting pkgver variable has no effect if the PKGBUILD has a pkgver() function'
+	fi
+
+	if ! grep --extended-regexp --quiet --max-count=1 "^pkgver=${pkgver}$" PKGBUILD; then
+		die "Non-standard pkgver declaration"
+	fi
+	sed --regexp-extended "s|^(pkgver=)${pkgver}$|\1${new_pkgver}|g" --in-place PKGBUILD
+}
+
+# set the pkgrel variable in a PKGBUILD
+# assumes that the pkgbuild is sourced so pkgrel is present
+pkgbuild_set_pkgrel() {
+	local new_pkgrel=$1
+	local pkgrel=${pkgrel}
+
+	if ! grep --extended-regexp --quiet --max-count=1 "^pkgrel=${pkgrel}$" PKGBUILD; then
+		die "Non-standard pkgrel declaration"
+	fi
+	sed --regexp-extended "s|^(pkgrel=)${pkgrel}$|\1${new_pkgrel}|g" --in-place PKGBUILD
+}
+

src/lib/util/srcinfo.sh

@@ -0,0 +1,69 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_UTIL_SRCINFO_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_UTIL_SRCINFO_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+
+source /usr/share/makepkg/util/util.sh
+source /usr/share/makepkg/srcinfo.sh
+
+set -eo pipefail
+
+
+print_srcinfo() {
+	local pkgpath=${1:-.}
+	local outdir pkg pid
+	local pids=()
+
+	# source the PKGBUILD
+	# shellcheck source=contrib/makepkg/PKGBUILD.proto
+	. "${pkgpath}"/PKGBUILD
+
+	# run without parallelization for single packages
+	if (( ${#pkgname[@]} == 1 )); then
+		write_srcinfo_content
+		return 0
+	fi
+
+	[[ -z ${WORKDIR:-} ]] && setup_workdir
+	outdir=$(mktemp --directory --tmpdir="${WORKDIR}" pkgctl-srcinfo.XXXXXXXXXX)
+
+	# fork workload for each split pkgname
+	for pkg in "${pkgname[@]}"; do
+		(
+			# deactivate errexit to avoid makepkg abort on grep_function
+			set +e
+			srcinfo_write_package "$pkg" > "${outdir}/${pkg}"
+		)&
+		pids+=($!)
+	done
+
+	# join workload
+	for pid in "${pids[@]}"; do
+		if ! wait "${pid}"; then
+			return 1
+		fi
+	done
+
+	# collect output
+	srcinfo_write_global
+	for pkg in "${pkgname[@]}"; do
+		srcinfo_separate_section
+		cat "${outdir}/${pkg}"
+	done
+}
+
+write_srcinfo_file() {
+	local pkgpath=${1:-.}
+	stat_busy 'Generating .SRCINFO'
+	if ! print_srcinfo "${pkgpath}" > "${pkgpath}"/.SRCINFO; then
+		error 'Failed to write .SRCINFO file'
+		return 1
+	fi
+	stat_done
+}

src/lib/util/term.sh

@@ -0,0 +1,182 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_UTIL_TERM_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_UTIL_TERM_SH=1
+
+set -eo pipefail
+
+
+readonly PKGCTL_TERM_SPINNER_DOTS=Dots
+export PKGCTL_TERM_SPINNER_DOTS
+readonly PKGCTL_TERM_SPINNER_DOTS12=Dots12
+export PKGCTL_TERM_SPINNER_DOTS12
+readonly PKGCTL_TERM_SPINNER_LINE=Line
+export PKGCTL_TERM_SPINNER_LINE
+readonly PKGCTL_TERM_SPINNER_SIMPLE_DOTS_SCROLLING=SimpleDotsScrolling
+export PKGCTL_TERM_SPINNER_SIMPLE_DOTS_SCROLLING
+readonly PKGCTL_TERM_SPINNER_TRIANGLE=Triangle
+export PKGCTL_TERM_SPINNER_TRIANGLE
+readonly PKGCTL_TERM_SPINNER_RANDOM=Random
+export PKGCTL_TERM_SPINNER_RANDOM
+
+readonly PKGCTL_TERM_SPINNER_TYPES=(
+	"${PKGCTL_TERM_SPINNER_DOTS}"
+	"${PKGCTL_TERM_SPINNER_DOTS12}"
+	"${PKGCTL_TERM_SPINNER_LINE}"
+	"${PKGCTL_TERM_SPINNER_SIMPLE_DOTS_SCROLLING}"
+	"${PKGCTL_TERM_SPINNER_TRIANGLE}"
+)
+export PKGCTL_TERM_SPINNER_TYPES
+
+
+term_cursor_hide() {
+	tput civis >&2
+}
+
+term_cursor_show() {
+	tput cnorm >&2
+}
+
+term_cursor_up() {
+	tput cuu1
+}
+
+term_carriage_return() {
+	tput cr
+}
+
+term_erase_line() {
+	tput el
+}
+
+term_erase_lines() {
+	local lines=$1
+
+	local cursor_up erase_line
+	cursor_up=$(term_cursor_up)
+	erase_line="$(term_carriage_return)$(term_erase_line)"
+
+	local prefix=''
+	for _ in $(seq 1 "${lines}"); do
+		printf '%s' "${prefix}${erase_line}"
+		prefix="${cursor_up}"
+	done
+}
+
+_pkgctl_spinner_type=${PKGCTL_TERM_SPINNER_RANDOM}
+term_spinner_set_type() {
+	_pkgctl_spinner_type=$1
+}
+
+# takes a status directory that can be used to dynamically update the spinner
+# by writing to the `status` file inside that directory atomically.
+# replace the placeholder %spinner% with the currently configured spinner type
+term_spinner_start() {
+	local status_dir=$1
+	local parent_pid=$$
+	(
+		local spinner_type=${_pkgctl_spinner_type}
+		local spinner_offset=0
+		local frame_buffer=''
+		local spinner status_message line
+
+		local status_file="${status_dir}/status"
+		local next_file="${status_dir}/next"
+		local drawn_file="${status_dir}/drawn"
+
+		# assign random spinner type
+		if [[ ${spinner_type} == "${PKGCTL_TERM_SPINNER_RANDOM}" ]]; then
+			spinner_type=${PKGCTL_TERM_SPINNER_TYPES[$((RANDOM % ${#PKGCTL_TERM_SPINNER_TYPES[@]}))]}
+		fi
+
+		# select spinner based on the named type
+		case "${spinner_type}" in
+			"${PKGCTL_TERM_SPINNER_DOTS}")
+				spinner=("⠋" "⠙" "⠹" "⠸" "⠼" "⠴" "⠦" "⠧" "⠇" "⠏")
+				update_interval=0.08
+				;;
+			"${PKGCTL_TERM_SPINNER_DOTS12}")
+				spinner=("⢀⠀" "⡀⠀" "⠄⠀" "⢂⠀" "⡂⠀" "⠅⠀" "⢃⠀" "⡃⠀" "⠍⠀" "⢋⠀" "⡋⠀" "⠍⠁" "⢋⠁" "⡋⠁" "⠍⠉" "⠋⠉" "⠋⠉" "⠉⠙" "⠉⠙" "⠉⠩" "⠈⢙" "⠈⡙" "⢈⠩" "⡀⢙" "⠄⡙" "⢂⠩" "⡂⢘" "⠅⡘" "⢃⠨" "⡃⢐" "⠍⡐" "⢋⠠" "⡋⢀" "⠍⡁" "⢋⠁" "⡋⠁" "⠍⠉" "⠋⠉" "⠋⠉" "⠉⠙" "⠉⠙" "⠉⠩" "⠈⢙" "⠈⡙" "⠈⠩" "⠀⢙" "⠀⡙" "⠀⠩" "⠀⢘" "⠀⡘" "⠀⠨" "⠀⢐" "⠀⡐" "⠀⠠" "⠀⢀" "⠀⡀")
+				update_interval=0.08
+				;;
+			"${PKGCTL_TERM_SPINNER_LINE}")
+				spinner=("⎯" "\\" "|" "/")
+				update_interval=0.13
+				;;
+			"${PKGCTL_TERM_SPINNER_SIMPLE_DOTS_SCROLLING}")
+				spinner=(".  " ".. " "..." " .." "  ." "   ")
+				update_interval=0.2
+				;;
+			"${PKGCTL_TERM_SPINNER_TRIANGLE}")
+				spinner=("◢" "◣" "◤" "◥")
+				update_interval=0.05
+				;;
+		esac
+
+		# hide the cursor while spinning
+		term_cursor_hide
+
+		# run the spinner as long as the parent process didn't terminate
+		while ps -p "${parent_pid}" &>/dev/null; do
+			# cache the new status template if it exists
+			if mv "${status_file}" "${next_file}" &>/dev/null; then
+				status_message="$(cat "$next_file")"
+			elif [[ -z "${status_message}" ]]; then
+				# wait until we either have a new or cached status
+				sleep 0.05
+			fi
+
+			# fill the frame buffer with the current status
+			local prefix=''
+			while IFS= read -r line; do
+				# replace spinner placeholder
+				line=${line//%spinner%/${spinner[spinner_offset%${#spinner[@]}]}}
+
+				# append the current line to the frame buffer
+				frame_buffer+="${prefix}${line}"
+				prefix=$'\n'
+			done <<< "${status_message}"
+
+			# print current frame buffer
+			echo -n "${frame_buffer}" >&2
+			mv "${next_file}" "${drawn_file}" &>/dev/null ||:
+
+			# setup next frame buffer to clear current content
+			frame_buffer=$(term_erase_lines "$(awk 'END {print NR}' <<< "${status_message}")")
+
+			# advance the spinner animation offset
+			(( ++spinner_offset ))
+
+			# sleep for the spinner update interval
+			sleep "${update_interval}"
+		done
+	)&
+	_pkgctl_spinner_pid=$!
+	disown
+}
+
+term_spinner_stop() {
+	local status_dir=$1
+	local frame_buffer status_file
+
+	# kill the spinner process
+	if ! kill "${_pkgctl_spinner_pid}" > /dev/null 2>&1; then
+		return 1
+	fi
+	unset _pkgctl_spinner_pid
+
+	# acquire last drawn status
+	status_file="${status_dir}/drawn"
+	if [[ ! -f ${status_file} ]]; then
+		return 0
+	fi
+
+	# clear terminal based on last status line
+	frame_buffer=$(term_erase_lines "$(awk 'END {print NR}' < "${status_file}")")
+	echo -n "${frame_buffer}" >&2
+
+	# show the cursor after stopping the spinner
+	term_cursor_show
+}

src/lib/valid-build-install.sh

@@ -0,0 +1,11 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+:
+
+# shellcheck disable=2034
+DEVTOOLS_VALID_BUILD_INSTALL=(
+	none
+	auto
+	all
+)

src/lib/valid-inspect.sh

@@ -0,0 +1,10 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# shellcheck disable=2034
+DEVTOOLS_VALID_INSPECT_MODES=(
+	never
+	always
+	failure
+)

src/lib/valid-repos.sh

@@ -4,7 +4,7 @@
 :
 
 # shellcheck disable=2034
-_repos=(
+DEVTOOLS_VALID_REPOS=(
 	core core-staging core-testing
 	extra extra-staging extra-testing
 	multilib multilib-staging multilib-testing
@@ -13,8 +13,9 @@ _repos=(
 )
 
 # shellcheck disable=2034
-_build_repos=(
-	extra staging testing
+DEVTOOLS_VALID_BUILDREPOS=(
+	core-staging core-testing
+	extra extra-staging extra-testing
 	multilib multilib-staging multilib-testing
 	gnome-unstable
 	kde-unstable

src/lib/valid-search.sh

@@ -0,0 +1,11 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+:
+
+# shellcheck disable=2034
+valid_search_output_format=(
+	pretty
+	plain
+	json
+)

src/lib/valid-tags.sh

@@ -4,13 +4,13 @@
 :
 
 # shellcheck disable=2034
-_arch=(
+DEVTOOLS_VALID_ARCHES=(
 	x86_64
 	any
 )
 
 # shellcheck disable=2034
-_tags=(
+DEVTOOLS_VALID_TAGS=(
 	core-x86_64 core-any
 	core-staging-x86_64 core-staging-any
 	core-testing-x86_64 core-testing-any

src/lib/version.sh

@@ -0,0 +1,73 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_VERSION_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_VERSION_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+
+set -e
+
+
+pkgctl_version_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+    cat <<- _EOF_
+		Usage: ${COMMAND} [COMMAND] [OPTIONS]
+
+		Check and manage package versions against upstream.
+
+		COMMANDS
+		    check      Compares local package versions against upstream
+		    upgrade    Adjust the PKGBUILD to match the latest upstream version
+
+		OPTIONS
+		    -h, --help    Show this help text
+
+		EXAMPLES
+		    $ ${COMMAND} check libfoo linux libbar
+_EOF_
+}
+
+pkgctl_version() {
+	if (( $# < 1 )); then
+		pkgctl_version_usage
+		exit 0
+	fi
+
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_version_usage
+				exit 0
+				;;
+			check)
+				_DEVTOOLS_COMMAND+=" $1"
+				shift
+				# shellcheck source=src/lib/version/check.sh
+				source "${_DEVTOOLS_LIBRARY_DIR}"/lib/version/check.sh
+				pkgctl_version_check "$@"
+				exit $?
+				;;
+			edit)
+				_DEVTOOLS_COMMAND+=" $1"
+				shift
+				# shellcheck source=src/lib/version/edit.sh
+				source "${_DEVTOOLS_LIBRARY_DIR}"/lib/version/edit.sh
+				pkgctl_version_edit "$@"
+				exit $?
+				;;
+			upgrade)
+				_DEVTOOLS_COMMAND+=" $1"
+				shift
+				# shellcheck source=src/lib/version/upgrade.sh
+				source "${_DEVTOOLS_LIBRARY_DIR}"/lib/version/upgrade.sh
+				pkgctl_version_upgrade "$@"
+				exit $?
+				;;
+			*)
+				die "invalid argument: %s" "$1"
+				;;
+		esac
+	done
+}

src/lib/version/check.sh

@@ -0,0 +1,340 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+#
+[[ -z ${DEVTOOLS_INCLUDE_VERSION_CHECK_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_VERSION_CHECK_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/util/term.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/term.sh
+
+source /usr/share/makepkg/util/message.sh
+
+set -eo pipefail
+
+readonly PKGCTL_VERSION_CHECK_EXIT_UP_TO_DATE=0
+export PKGCTL_VERSION_CHECK_EXIT_UP_TO_DATE
+readonly PKGCTL_VERSION_CHECK_EXIT_OUT_OF_DATE=2
+export PKGCTL_VERSION_CHECK_EXIT_OUT_OF_DATE
+readonly PKGCTL_VERSION_CHECK_EXIT_FAILURE=3
+export PKGCTL_VERSION_CHECK_EXIT_FAILURE
+
+
+pkgctl_version_check_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+	cat <<- _EOF_
+		Usage: ${COMMAND} [OPTIONS] [PKGBASE]...
+
+		Compares the versions of packages in the local packaging repository against
+		their latest upstream versions.
+
+		Upon execution, it generates a grouped list that provides detailed insights
+		into each package's status. For each package, it displays the current local
+		version alongside the latest version available upstream.
+
+		Outputs a summary of up-to-date packages, out-of-date packages, and any
+		check failures.
+
+		OPTIONS
+		    -v, --verbose    Display results including up-to-date versions
+		    -h, --help       Show this help text
+
+		EXAMPLES
+		    $ ${COMMAND} neovim vim
+_EOF_
+}
+
+pkgctl_version_check() {
+	local pkgbases=()
+	local verbose=0
+
+	local path status_file path pkgbase upstream_version result
+
+	local up_to_date=()
+	local out_of_date=()
+	local failure=()
+	local current_item=0
+	local section_separator=''
+	local exit_code=${PKGCTL_VERSION_CHECK_EXIT_UP_TO_DATE}
+
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_version_check_usage
+				exit 0
+				;;
+			-v|--verbose)
+				verbose=1
+				shift
+				;;
+			--)
+				shift
+				break
+				;;
+			-*)
+				die "invalid argument: %s" "$1"
+				;;
+			*)
+				pkgbases=("$@")
+				break
+				;;
+		esac
+	done
+
+	if ! command -v nvchecker &>/dev/null; then
+		die "The \"$_DEVTOOLS_COMMAND\" command requires 'nvchecker'"
+	fi
+
+	# Check if used without pkgbases in a packaging directory
+	if (( ${#pkgbases[@]} == 0 )); then
+		if [[ -f PKGBUILD ]]; then
+			pkgbases=(".")
+		else
+			pkgctl_version_check_usage
+			exit 1
+		fi
+	fi
+
+	# enable verbose mode when we only have a single item to check
+	if (( ${#pkgbases[@]} == 1 )); then
+		verbose=1
+	fi
+
+	# start a terminal spinner as checking versions takes time
+	status_dir=$(mktemp --tmpdir="${WORKDIR}" --directory pkgctl-version-check-spinner.XXXXXXXXXX)
+	term_spinner_start "${status_dir}"
+
+	for path in "${pkgbases[@]}"; do
+		pushd "${path}" >/dev/null
+
+		if [[ ! -f "PKGBUILD" ]]; then
+			die "No PKGBUILD found for ${path}"
+		fi
+
+		# update the current terminal spinner status
+		(( ++current_item ))
+		pkgctl_version_check_spinner \
+			"${status_dir}" \
+			"${#up_to_date[@]}" \
+			"${#out_of_date[@]}" \
+			"${#failure[@]}" \
+			"${current_item}" \
+			"${#pkgbases[@]}"
+
+		# reset common PKGBUILD variables
+		unset pkgbase pkgname arch source pkgver pkgrel validpgpkeys
+		# shellcheck source=contrib/makepkg/PKGBUILD.proto
+		. ./PKGBUILD
+		pkgbase=${pkgbase:-$pkgname}
+
+		if ! result=$(get_upstream_version); then
+			result="${BOLD}${pkgbase}${ALL_OFF}: ${result}"
+			failure+=("${result}")
+			popd >/dev/null
+			continue
+		fi
+		upstream_version=${result}
+
+		if ! result=$(vercmp "${upstream_version}" "${pkgver}"); then
+			result="${BOLD}${pkgbase}${ALL_OFF}: failed to compare version ${upstream_version} against ${pkgver}"
+			failure+=("${result}")
+			popd >/dev/null
+			continue
+		fi
+
+		if (( result == 0 )); then
+			result="${BOLD}${pkgbase}${ALL_OFF}: current version ${PURPLE}${pkgver}${ALL_OFF} is latest"
+			up_to_date+=("${result}")
+		elif (( result < 0 )); then
+			result="${BOLD}${pkgbase}${ALL_OFF}: current version ${PURPLE}${pkgver}${ALL_OFF} is newer than ${DARK_GREEN}${upstream_version}${ALL_OFF}"
+			up_to_date+=("${result}")
+		elif (( result > 0 )); then
+			result="${BOLD}${pkgbase}${ALL_OFF}: upgrade from version ${PURPLE}${pkgver}${ALL_OFF} to ${DARK_GREEN}${upstream_version}${ALL_OFF}"
+			out_of_date+=("${result}")
+		fi
+
+		popd >/dev/null
+	done
+
+	# stop the terminal spinner after all checks
+	term_spinner_stop "${status_dir}"
+
+	if (( verbose )) && (( ${#up_to_date[@]} > 0 )); then
+		printf "%sUp-to-date%s\n" "${section_separator}${BOLD}${UNDERLINE}" "${ALL_OFF}"
+		section_separator=$'\n'
+		for result in "${up_to_date[@]}"; do
+			msg_success " ${result}"
+		done
+	fi
+
+	if (( ${#failure[@]} > 0 )); then
+		exit_code=${PKGCTL_VERSION_CHECK_EXIT_FAILURE}
+		printf "%sFailure%s\n" "${section_separator}${BOLD}${UNDERLINE}" "${ALL_OFF}"
+		section_separator=$'\n'
+		for result in "${failure[@]}"; do
+			msg_error " ${result}"
+		done
+	fi
+
+	if (( ${#out_of_date[@]} > 0 )); then
+		exit_code=${PKGCTL_VERSION_CHECK_EXIT_OUT_OF_DATE}
+		printf "%sOut-of-date%s\n" "${section_separator}${BOLD}${UNDERLINE}" "${ALL_OFF}"
+		section_separator=$'\n'
+		for result in "${out_of_date[@]}"; do
+			msg_warn " ${result}"
+		done
+	fi
+
+	# Show summary when processing multiple packages
+	if (( ${#pkgbases[@]} > 1 )); then
+		printf '%s' "${section_separator}"
+		pkgctl_version_check_summary \
+			"${#up_to_date[@]}" \
+			"${#out_of_date[@]}" \
+			"${#failure[@]}"
+	fi
+
+	# return status based on results
+	return "${exit_code}"
+}
+
+get_upstream_version() {
+	local config=.nvchecker.toml
+	local output errors upstream_version
+	local output
+	local opts=()
+	local keyfile="${XDG_CONFIG_HOME:-${HOME}/.config}/nvchecker/keyfile.toml"
+
+	# check nvchecker config file
+	if ! errors=$(nvchecker_check_config "${config}"); then
+		printf "%s" "${errors}"
+		return 1
+	fi
+
+	# populate keyfile to nvchecker opts
+	if [[ -f ${keyfile} ]]; then
+		opts+=(--keyfile "${keyfile}")
+	fi
+
+	if ! output=$(nvchecker --file "${config}" --logger json "${opts[@]}" 2>&1 | \
+			jq --raw-output 'select(.level != "debug")'); then
+		printf "failed to run nvchecker: %s" "${output}"
+		return 1
+	fi
+
+	if ! errors=$(nvchecker_check_error "${output}"); then
+		printf "%s" "${errors}"
+		return 1
+	fi
+
+	if ! upstream_version=$(jq --raw-output --exit-status '.version' <<< "${output}"); then
+		printf "failed to select version from result"
+		return 1
+	fi
+
+	printf "%s" "${upstream_version}"
+	return 0
+}
+
+nvchecker_check_config() {
+	local config=$1
+
+	local restricted_properties=(keyfile httptoken token)
+	local property
+
+	# check if the config file exists
+	if [[ ! -f ${config} ]]; then
+		printf "configuration file not found: %s" "${config}"
+		return 1
+	fi
+
+	# check if config contains any restricted properties like secrets
+	for property in "${restricted_properties[@]}"; do
+		if grep --max-count=1 --quiet "^${property}" < "${config}"; then
+			printf "restricted property in %s: %s" "${config}" "${property}"
+			return 1
+		fi
+	done
+
+	# check if the config contains a pkgbase section
+	if [[ -n ${pkgbase} ]] && ! grep --max-count=1 --extended-regexp --quiet "^\\[\"?${pkgbase}\"?\\]" < "${config}"; then
+		printf "missing pkgbase section in %s: %s" "${config}" "${pkgbase}"
+		return 1
+	fi
+
+	# check if the config contains any section other than pkgbase
+	if [[ -n ${pkgbase} ]] && property=$(grep --max-count=1 --perl-regexp "^\\[(?!\"?${pkgbase}\"?\\]).+\\]" < "${config}"); then
+		printf "non-pkgbase section not supported in %s: %s" "${config}" "${property}"
+		return 1
+	fi
+}
+
+nvchecker_check_error() {
+	local result=$1
+	local errors
+
+	if ! errors=$(jq --raw-output --exit-status \
+			'select(.level == "error") | "\(.event)" + if .error then ": \(.error)" else "" end' \
+			<<< "${result}"); then
+		return 0
+	fi
+
+	mapfile -t errors <<< "${errors}"
+	printf "%s\n" "${errors[@]}"
+	return 1
+}
+
+pkgctl_version_check_summary() {
+	local up_to_date_count=$1
+	local out_of_date_count=$2
+	local failure_count=$3
+
+	# print nothing if all stats are zero
+	if (( up_to_date_count == 0 )) && \
+			(( out_of_date_count == 0 )) && \
+			(( failure_count == 0 )); then
+		return 0
+	fi
+
+	# print summary for all none zero stats
+	printf "%sSummary%s\n" "${BOLD}${UNDERLINE}" "${ALL_OFF}"
+	if (( up_to_date_count > 0 )); then
+		msg_success " Up-to-date: ${BOLD}${up_to_date_count}${ALL_OFF}" 2>&1
+	fi
+	if (( failure_count > 0 )); then
+		msg_error " Failure: ${BOLD}${failure_count}${ALL_OFF}" 2>&1
+	fi
+	if (( out_of_date_count > 0 )); then
+		msg_warn " Out-of-date: ${BOLD}${out_of_date_count}${ALL_OFF}" 2>&1
+	fi
+}
+
+pkgctl_version_check_spinner() {
+	local status_dir=$1
+	local up_to_date_count=$2
+	local out_of_date_count=$3
+	local failure_count=$4
+	local current=$5
+	local total=$6
+
+	local percentage=$(( 100 * current / total ))
+	local tmp_file="${status_dir}/tmp"
+	local status_file="${status_dir}/status"
+
+	# print the current summary
+	pkgctl_version_check_summary \
+		"${up_to_date_count}" \
+		"${out_of_date_count}" \
+		"${failure_count}" > "${tmp_file}"
+
+	# print the progress status
+	printf "📡 Checking: %s/%s [%s] %%spinner%%" \
+		"${BOLD}${current}" "${total}" "${percentage}%${ALL_OFF}"  \
+		>> "${tmp_file}"
+
+	# swap the status file
+	mv "${tmp_file}" "${status_file}"
+}

src/lib/version/edit.sh

@@ -0,0 +1,101 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+#
+[[ -z ${DEVTOOLS_INCLUDE_VERSION_CHECK_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_VERSION_CHECK_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/util/term.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/term.sh
+
+source /usr/share/makepkg/util/message.sh
+
+set -eo pipefail
+
+
+pkgctl_version_edit_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+	cat <<- _EOF_
+		Usage: ${COMMAND} [OPTIONS] [PKGBASE]...
+
+		Compares the versions of packages in the local packaging repository against
+		their latest upstream versions.
+
+		Upon execution, it generates a grouped list that provides detailed insights
+		into each package's status. For each package, it displays the current local
+		version alongside the latest version available upstream.
+
+		Outputs a summary of up-to-date packages, out-of-date packages, and any
+		check failures.
+
+		OPTIONS
+		    -h, --help       Show this help text
+
+		EXAMPLES
+		    $ ${COMMAND} neovim vim
+_EOF_
+}
+
+pkgctl_version_edit() {
+	local pkgbases=()
+
+	local path pkgbase
+
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_version_edit_usage
+				exit 0
+				;;
+			--)
+				shift
+				break
+				;;
+			-*)
+				die "invalid argument: %s" "$1"
+				;;
+			*)
+				pkgbases=("$@")
+				break
+				;;
+		esac
+	done
+
+	# Check if used without pkgbases in a packaging directory
+	if (( ${#pkgbases[@]} == 0 )); then
+		if [[ -f PKGBUILD ]]; then
+			pkgbases=(".")
+		else
+			pkgctl_version_check_usage
+			exit 1
+		fi
+	fi
+
+	# Check if EDITOR or xdg-open are present
+	if [[ -z ${EDITOR} ]] && ! command -v xdg-open &>/dev/null; then
+		die "The version edit command requires either \$EDITOR or 'xdg-open'"
+	fi
+
+	for path in "${pkgbases[@]}"; do
+		pushd "${path}" >/dev/null
+
+		if [[ ! -f "PKGBUILD" ]]; then
+			die "No PKGBUILD found for ${path}"
+		fi
+
+		if [[ ! -f .nvchecker.toml ]]; then
+			touch .nvchecker.toml
+		fi
+
+		if [[ -n ${EDITOR} ]]; then
+			"${EDITOR}" .nvchecker.toml
+		else
+			xdg-open .nvchecker.toml
+		fi
+
+		popd >/dev/null
+	done
+}

src/lib/version/upgrade.sh

@@ -0,0 +1,248 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+#
+[[ -z ${DEVTOOLS_INCLUDE_VERSION_UPGRADE_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_VERSION_UPGRADE_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/version/check.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/version/check.sh
+# shellcheck source=src/lib/util/pkgbuild.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/pkgbuild.sh
+# shellcheck source=src/lib/util/term.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/term.sh
+
+source /usr/share/makepkg/util/message.sh
+
+set -e
+
+pkgctl_version_upgrade_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+	cat <<- _EOF_
+		Usage: ${COMMAND} [OPTIONS] [PKGBASE]...
+
+		Streamlines the process of keeping PKGBUILD files up-to-date with the latest
+		upstream versions.
+
+		Upon execution, it automatically adjusts the PKGBUILD file, ensuring that the
+		pkgver field is set to match the latest version available from the upstream
+		source. In addition to updating the pkgver, this command also resets the pkgrel
+		to 1.
+
+		Outputs a summary of upgraded packages, up-to-date packages, and any check
+		failures.
+
+		OPTIONS
+		    -v, --verbose    Display results including up-to-date versions
+		    -h, --help       Show this help text
+
+		EXAMPLES
+		    $ ${COMMAND} neovim vim
+_EOF_
+}
+
+pkgctl_version_upgrade() {
+	local path upstream_version result
+	local pkgbases=()
+	local verbose=0
+	local exit_code=0
+	local current_item=0
+
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_version_upgrade_usage
+				exit 0
+				;;
+			-v|--verbose)
+				verbose=1
+				shift
+				;;
+			--)
+				shift
+				break
+				;;
+			-*)
+				die "invalid argument: %s" "$1"
+				;;
+			*)
+				pkgbases=("$@")
+				break
+				;;
+		esac
+	done
+
+	if ! command -v nvchecker &>/dev/null; then
+		die "The \"$_DEVTOOLS_COMMAND\" command requires 'nvchecker'"
+	fi
+
+	# Check if used without pkgbases in a packaging directory
+	if (( ${#pkgbases[@]} == 0 )); then
+		if [[ -f PKGBUILD ]]; then
+			pkgbases=(".")
+		else
+			pkgctl_version_upgrade_usage
+			exit 1
+		fi
+	fi
+
+	# enable verbose mode when we only have a single item to check
+	if (( ${#pkgbases[@]} == 1 )); then
+		verbose=1
+	fi
+
+	# start a terminal spinner as checking versions takes time
+	status_dir=$(mktemp --tmpdir="${WORKDIR}" --directory pkgctl-version-check-spinner.XXXXXXXXXX)
+	term_spinner_start "${status_dir}"
+
+	for path in "${pkgbases[@]}"; do
+		pushd "${path}" >/dev/null
+
+		if [[ ! -f "PKGBUILD" ]]; then
+			die "No PKGBUILD found for ${path}"
+		fi
+
+		# update the current terminal spinner status
+		(( ++current_item ))
+		pkgctl_version_upgrade_spinner \
+			"${status_dir}" \
+			"${#up_to_date[@]}" \
+			"${#out_of_date[@]}" \
+			"${#failure[@]}" \
+			"${current_item}" \
+			"${#pkgbases[@]}"
+
+		# reset common PKGBUILD variables
+		unset pkgbase pkgname arch source pkgver pkgrel validpgpkeys
+		# shellcheck source=contrib/makepkg/PKGBUILD.proto
+		. ./PKGBUILD
+		pkgbase=${pkgbase:-$pkgname}
+
+		if ! result=$(get_upstream_version); then
+			result="${BOLD}${pkgbase}${ALL_OFF}: ${result}"
+			failure+=("${result}")
+			popd >/dev/null
+			continue
+		fi
+		upstream_version=${result}
+
+		if ! result=$(vercmp "${upstream_version}" "${pkgver}"); then
+			result="${BOLD}${pkgbase}${ALL_OFF}: failed to compare version ${upstream_version} against ${pkgver}"
+			failure+=("${result}")
+			popd >/dev/null
+			continue
+		fi
+
+		if (( result == 0 )); then
+			result="${BOLD}${pkgbase}${ALL_OFF}: current version ${PURPLE}${pkgver}${ALL_OFF} is latest"
+			up_to_date+=("${result}")
+		elif (( result < 0 )); then
+			result="${BOLD}${pkgbase}${ALL_OFF}: current version ${PURPLE}${pkgver}${ALL_OFF} is newer than ${DARK_GREEN}${upstream_version}${ALL_OFF}"
+			up_to_date+=("${result}")
+		elif (( result > 0 )); then
+			result="${BOLD}${pkgbase}${ALL_OFF}: upgraded from version ${PURPLE}${pkgver}${ALL_OFF} to ${DARK_GREEN}${upstream_version}${ALL_OFF}"
+			out_of_date+=("${result}")
+
+			# change the PKGBUILD
+			pkgbuild_set_pkgver "${upstream_version}"
+			pkgbuild_set_pkgrel 1
+		fi
+
+		popd >/dev/null
+	done
+
+	# stop the terminal spinner after all checks
+	term_spinner_stop "${status_dir}"
+
+	if (( verbose )) && (( ${#up_to_date[@]} > 0 )); then
+		printf "%sUp-to-date%s\n" "${section_separator}${BOLD}${UNDERLINE}" "${ALL_OFF}"
+		section_separator=$'\n'
+		for result in "${up_to_date[@]}"; do
+			msg_success " ${result}"
+		done
+	fi
+
+	if (( ${#failure[@]} > 0 )); then
+		exit_code=1
+		printf "%sFailure%s\n" "${section_separator}${BOLD}${UNDERLINE}" "${ALL_OFF}"
+		section_separator=$'\n'
+		for result in "${failure[@]}"; do
+			msg_error " ${result}"
+		done
+	fi
+
+	if (( ${#out_of_date[@]} > 0 )); then
+		printf "%sUpgraded%s\n" "${section_separator}${BOLD}${UNDERLINE}" "${ALL_OFF}"
+		section_separator=$'\n'
+		for result in "${out_of_date[@]}"; do
+			msg_warn " ${result}"
+		done
+	fi
+
+	# Show summary when processing multiple packages
+	if (( ${#pkgbases[@]} > 1 )); then
+		printf '%s' "${section_separator}"
+		pkgctl_version_upgrade_summary \
+			"${#up_to_date[@]}" \
+			"${#out_of_date[@]}" \
+			"${#failure[@]}"
+	fi
+
+	# return status based on results
+	return "${exit_code}"
+}
+
+pkgctl_version_upgrade_summary() {
+	local up_to_date_count=$1
+	local out_of_date_count=$2
+	local failure_count=$3
+
+	# print nothing if all stats are zero
+	if (( up_to_date_count == 0 )) && \
+			(( out_of_date_count == 0 )) && \
+			(( failure_count == 0 )); then
+		return 0
+	fi
+
+	# print summary for all none zero stats
+	printf "%sSummary%s\n" "${BOLD}${UNDERLINE}" "${ALL_OFF}"
+	if (( up_to_date_count > 0 )); then
+		msg_success " Up-to-date: ${BOLD}${up_to_date_count}${ALL_OFF}" 2>&1
+	fi
+	if (( failure_count > 0 )); then
+		msg_error " Failure: ${BOLD}${failure_count}${ALL_OFF}" 2>&1
+	fi
+	if (( out_of_date_count > 0 )); then
+		msg_warn " Upgraded: ${BOLD}${out_of_date_count}${ALL_OFF}" 2>&1
+	fi
+}
+
+pkgctl_version_upgrade_spinner() {
+	local status_dir=$1
+	local up_to_date_count=$2
+	local out_of_date_count=$3
+	local failure_count=$4
+	local current=$5
+	local total=$6
+
+	local percentage=$(( 100 * current / total ))
+	local tmp_file="${status_dir}/tmp"
+	local status_file="${status_dir}/status"
+
+	# print the current summary
+	pkgctl_version_upgrade_summary \
+		"${up_to_date_count}" \
+		"${out_of_date_count}" \
+		"${failure_count}" > "${tmp_file}"
+
+	# print the progress status
+	printf "📡 Upgrading: %s/%s [%s] %%spinner%%" \
+		"${BOLD}${current}" "${total}" "${percentage}%${ALL_OFF}"  \
+		>> "${tmp_file}"
+
+	# swap the status file
+	mv "${tmp_file}" "${status_file}"
+}

src/lib/version/version.sh

@@ -1,47 +0,0 @@
-#!/hint/bash
-#
-# SPDX-License-Identifier: GPL-3.0-or-later
-
-[[ -z ${DEVTOOLS_INCLUDE_VERSION_SH:-} ]] || return 0
-DEVTOOLS_INCLUDE_VERSION_SH=1
-
-_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
-
-source /usr/share/makepkg/util/message.sh
-
-set -e
-
-
-pkgctl_version_usage() {
-	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
-    cat <<- _EOF_
-		Usage: ${COMMAND} [OPTIONS]
-
-		Shows the current version information of pkgctl
-
-		OPTIONS
-		    -h, --help    Show this help text
-_EOF_
-}
-
-pkgctl_version_print() {
-	cat <<- _EOF_
-		pkgctl @buildtoolver@
-_EOF_
-}
-
-pkgctl_version() {
-	while (( $# )); do
-		case $1 in
-			-h|--help)
-				pkgctl_version_usage
-				exit 0
-				;;
-			*)
-				die "invalid argument: %s" "$1"
-				;;
-		esac
-	done
-
-	pkgctl_version_print
-}

src/makechrootpkg.in

@@ -8,9 +8,12 @@ _DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
 # shellcheck source=src/lib/archroot.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/archroot.sh
+# shellcheck source=src/lib/valid-inspect.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-inspect.sh
 
 
 source /usr/share/makepkg/util/config.sh
+source /usr/share/makepkg/util/util.sh
 
 shopt -s nullglob
 
@@ -31,6 +34,8 @@ run_checkpkg=0
 temp_chroot=0
 tmp_opts="nosuid,nodev,size=50%,nr_inodes=2m"
 
+inspect=never
+
 bindmounts_ro=()
 bindmounts_rw=()
 
@@ -76,6 +81,7 @@ usage() {
 	echo '-C         Run checkpkg on the package'
 	echo '-T         Build in a temporary directory'
 	echo '-U         Run makepkg as a specified user'
+	echo '-x <when>  Inspect chroot after build (never, always, failure)'
 	exit 1
 }
 
@@ -280,7 +286,7 @@ move_products() {
 }
 # }}}
 
-while getopts 'hcur:I:l:nCTD:d:U:' arg; do
+while getopts 'hcur:I:l:nCTD:d:U:x:' arg; do
 	case "$arg" in
 		c) clean_first=1 ;;
 		D) bindmounts_ro+=("--bind-ro=$OPTARG") ;;
@@ -293,6 +299,7 @@ while getopts 'hcur:I:l:nCTD:d:U:' arg; do
 		C) run_checkpkg=1 ;;
 		T) temp_chroot=1; copy+="-$$" ;;
 		U) makepkg_user="$OPTARG" ;;
+		x) inspect="$OPTARG" ;;
 		h|*) usage ;;
 	esac
 done
@@ -314,6 +321,10 @@ else
 	copydir="$chrootdir/$copy"
 fi
 
+if ! in_array "${inspect}" "${DEVTOOLS_VALID_INSPECT_MODES[@]}"; then
+	die "Invalid inspect mode: %s" "${inspect}"
+fi
+
 # Pass all arguments after -- right to makepkg
 makepkg_args+=("${@:$OPTIND}")
 
@@ -368,11 +379,16 @@ download_sources
 
 prepare_chroot
 
+nspawn_build_args=(
+	--bind="${PWD//:/\\:}:/startdir"
+	--bind="${SRCDEST//:/\\:}:/srcdest"
+	--tmpfs="/tmp:${tmp_opts}"
+	"${bindmounts_ro[@]}"
+	"${bindmounts_rw[@]}"
+)
+
 if arch-nspawn "$copydir" \
-	--bind="${PWD//:/\\:}:/startdir" \
-	--bind="${SRCDEST//:/\\:}:/srcdest" \
-	--tmpfs="/tmp:${tmp_opts}" \
-	"${bindmounts_ro[@]}" "${bindmounts_rw[@]}" \
+	"${nspawn_build_args[@]}" \
 	/chrootbuild "${makepkg_args[@]}"
 then
 	mapfile -t pkgnames < <(sudo -u "$makepkg_user" bash -c 'source PKGBUILD; printf "%s\n" "${pkgname[@]}"')
@@ -382,6 +398,18 @@ else
 	move_logfiles
 fi
 
+if [[ $inspect == always ]] || ( [[ $inspect == failure ]] && (( ret != 0 )) ); then
+	if (( ret == 0 )); then
+		msg "Build succeeded, inspecting %s" "$copydir"
+	else
+		error "Build failed, inspecting %s" "$copydir"
+	fi
+	arch-nspawn "$copydir" \
+		"${nspawn_build_args[@]}" \
+		--user=builduser \
+		--chdir=/build
+fi
+
 (( temp_chroot )) && delete_chroot "$copydir" "$copy"
 
 if (( ret != 0 )); then

src/makerepropkg.in

@@ -22,6 +22,7 @@ declare -a buildenv buildopts installed installpkgs
 archiveurl='https://archive.archlinux.org/packages'
 buildroot=/var/lib/archbuild/reproducible
 diffoscope=0
+makepkg_options=()
 
 chroot=$USER
 [[ -n ${SUDO_USER:-} ]] && chroot=$SUDO_USER
@@ -116,6 +117,7 @@ For more details see https://reproducible-builds.org/
 
 OPTIONS
     -d            Run diffoscope if the package is unreproducible
+    -n            Do not run the check() function in the PKGBUILD
     -c <dir>      Set pacman cache
     -M <file>     Location of a makepkg config file
     -l <chroot>   The directory name to use as the chroot namespace
@@ -125,9 +127,13 @@ OPTIONS
 __EOF__
 }
 
-while getopts 'dM:c:l:h' arg; do
+# save all args for check_root
+orig_args=("$@")
+
+while getopts 'dnM:c:l:h' arg; do
     case "$arg" in
         d) diffoscope=1 ;;
+        n) makepkg_options+=(--nocheck) ;;
         M) archroot_args+=(-M "$OPTARG") ;;
         c) cache_dirs+=("$OPTARG") ;;
         l) chroot="$OPTARG" ;;
@@ -137,7 +143,7 @@ while getopts 'dM:c:l:h' arg; do
 done
 shift $((OPTIND - 1))
 
-check_root "" "${BASH_SOURCE[0]}" "$@"
+check_root "" "${BASH_SOURCE[0]}" "${orig_args[@]}"
 
 [[ -f PKGBUILD ]] || { error "No PKGBUILD in current directory."; exit 1; }
 
@@ -251,7 +257,7 @@ install -d -o "${SUDO_UID:-$UID}" -g "$(id -g "${SUDO_UID:-$UID}")" "${namespace
 arch-nspawn "${namespace}/build" \
     --bind="${PWD}:/startdir" \
     --bind="${SRCDEST}:/srcdest" \
-    /chrootbuild -C --noconfirm --log --holdver --skipinteg
+    /chrootbuild -C --noconfirm --log --holdver --skipinteg "${makepkg_options[@]}"
 ret=$?
 
 if (( ${ret} == 0 )); then

src/mkarchroot.in

@@ -32,6 +32,9 @@ usage() {
 	exit 1
 }
 
+# save all args for check_root
+orig_args=("$@")
+
 while getopts 'hUC:M:c:f:s' arg; do
 	case "$arg" in
 		U) umode=U ;;
@@ -52,7 +55,7 @@ shift $((OPTIND - 1))
 
 (( $# < 2 )) && die 'You must specify a directory and one or more packages.'
 
-check_root "" "${BASH_SOURCE[0]}" "$@"
+check_root "" "${BASH_SOURCE[0]}" "${orig_args[@]}"
 
 working_dir="$(readlink -f "$1")"
 shift 1

src/offload-build.in

@@ -6,15 +6,24 @@
 #
 # SPDX-License-Identifier: GPL-3.0-or-later
 
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/util/makepkg.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/makepkg.sh
+
 source /usr/share/makepkg/util/config.sh
 
+# Deprecation warning
+if [[ -z $_DEVTOOLS_COMMAND ]]; then
+	warning "${0##*/} is deprecated and will be removed. Use 'pkgctl build --offload' instead"
+fi
 
 # global defaults suitable for use by Arch staff
 repo=extra
 arch=x86_64
 server=build.archlinux.org
-
-die() { printf "error: $1\n" "${@:2}"; exit 1; }
+rsyncopts=(-e ssh -c -h -L --progress --partial -y)
 
 usage() {
     cat <<- _EOF_
@@ -79,7 +88,7 @@ load_makepkg_config
 # transferred, including local sources, install scripts, and changelogs.
 export TEMPDIR=$(mktemp -d --tmpdir offload-build.XXXXXXXXXX)
 export SRCPKGDEST=${TEMPDIR}
-makepkg --source || die "unable to make source package"
+makepkg_source_package || die "unable to make source package"
 
 # Temporary cosmetic workaround makepkg if SRCDEST is set somewhere else
 # but an empty src dir is created in PWD. Remove once fixed in makepkg.
@@ -91,6 +100,7 @@ mapfile -t files < <(
     # shellcheck disable=SC2145
     cat "$SRCPKGDEST"/*"$SRCEXT" |
         ssh $server '
+            export TERM="'"${TERM}"'"
             temp="${XDG_CACHE_HOME:-$HOME/.cache}/offload-build" &&
             mkdir -p "$temp" &&
             temp=$(mktemp -d -p "$temp") &&
@@ -106,14 +116,16 @@ mapfile -t files < <(
             if [[ -f /usr/share/devtools/makepkg.conf.d/'"${repo}"'-'"${arch}"'.conf ]]; then
                 makepkg_config="/usr/share/devtools/makepkg.conf.d/'"${repo}"'-'"${arch}"'.conf"
             fi &&
-            makepkg --config <(cat "${makepkg_user_config}" "${makepkg_config}" 2>/dev/null) --packagelist &&
+            while read -r file; do
+                [[ -f "${file}" ]] && printf "%s\n" "${file}" ||:
+            done < <(makepkg --config <(cat "${makepkg_user_config}" "${makepkg_config}" 2>/dev/null) --packagelist) &&
             printf "%s\n" "${temp}/PKGBUILD"
 ')
 
 
 if (( ${#files[@]} )); then
     printf '%s\n' '' '-> copying files...'
-    scp "${files[@]/#/$server:}" "${TEMPDIR}/"
+    rsync "${rsyncopts[@]}" "${files[@]/#/$server:}" "${TEMPDIR}/" || die
     mv "${TEMPDIR}"/*.pkg.tar* "${PKGDEST:-${PWD}}/"
     mv "${TEMPDIR}/PKGBUILD" "${PWD}/"
 else

src/pkgctl.in

@@ -19,13 +19,15 @@ usage() {
 		Unified command-line frontend for devtools.
 
 		COMMANDS
+		    aur     Interact with the Arch User Repository
 		    auth    Authenticate with services like GitLab
 		    build   Build packages inside a clean chroot
-		    db      Pacman database modification for packge update, move etc
+		    db      Pacman database modification for package update, move etc
 		    diff    Compare package files using different modes
 		    release Release step to commit, tag and upload build artifacts
 		    repo    Manage Git packaging repositories and their configuration
-		    version Show pkgctl version information
+		    search  Search for an expression across the GitLab packaging group
+		    version Check and manage package versions against upstream
 
 		OPTIONS
 		    -h, --help     Show this help text
@@ -37,8 +39,16 @@ if (( $# < 1 )); then
 	exit 1
 fi
 
+pkgctl_version_print() {
+	cat <<- _EOF_
+		pkgctl @buildtoolver@
+_EOF_
+}
+
 export _DEVTOOLS_COMMAND='pkgctl'
 
+setup_workdir
+
 load_devtools_config
 
 # command checking
@@ -48,6 +58,14 @@ while (( $# )); do
 			usage
 			exit 0
 			;;
+		aur)
+			_DEVTOOLS_COMMAND+=" $1"
+			shift
+			# shellcheck source=src/lib/aur.sh
+			source "${_DEVTOOLS_LIBRARY_DIR}"/lib/aur.sh
+			pkgctl_aur "$@"
+			exit 0
+			;;
 		build)
 			_DEVTOOLS_COMMAND+=" $1"
 			shift
@@ -94,14 +112,28 @@ while (( $# )); do
 			pkgctl_release "$@"
 			exit 0
 			;;
-		version|--version|-V)
+		search)
 			_DEVTOOLS_COMMAND+=" $1"
 			shift
-			# shellcheck source=src/lib/version/version.sh
-			source "${_DEVTOOLS_LIBRARY_DIR}"/lib/version/version.sh
+			# shellcheck source=src/lib/release.sh
+			source "${_DEVTOOLS_LIBRARY_DIR}"/lib/search.sh
+			pkgctl_search "$@"
+			exit 0
+			;;
+		version)
+			_DEVTOOLS_COMMAND+=" $1"
+			shift
+			# shellcheck source=src/lib/version.sh
+			source "${_DEVTOOLS_LIBRARY_DIR}"/lib/version.sh
 			pkgctl_version "$@"
 			exit 0
 			;;
+		--version|-V)
+			_DEVTOOLS_COMMAND+=" $1"
+			shift
+			pkgctl_version_print
+			exit 0
+			;;
 		*)
 			die "invalid command: %s" "$1"
 			;;

src/sogrep.in

@@ -31,7 +31,7 @@ recache() {
 
     (( VERBOSE )) && verbosity=--progress-bar
 
-    for repo in "${_repos[@]}"; do
+    for repo in "${DEVTOOLS_VALID_REPOS[@]}"; do
         if [[ -n "$SOLINKS_MIRROR" ]]; then
             mirror="$SOLINKS_MIRROR"
         elif ! mirror="$(set -o pipefail; pacman-conf --repo "$repo" Server 2>/dev/null | head -n1)"; then
@@ -72,7 +72,7 @@ is_outdated_cache() {
     # links databases are generated at about the same time every day; we should
     # attempt to check for new database files if any of them are over a day old
 
-    for repo in "${_repos[@]}"; do
+    for repo in "${DEVTOOLS_VALID_REPOS[@]}"; do
         for arch in "${arches[@]}"; do
             local dbpath=${SOCACHE_DIR}/${arch}/${repo}.links.tar.gz
             if [[ ! -f ${dbpath} ]] || [[ $(find "${dbpath}" -mtime +0) ]]; then
@@ -85,10 +85,10 @@ is_outdated_cache() {
 }
 
 search() {
-    local repo=$1 arch lib=$2 srepos=("${_repos[@]}")
+    local repo=$1 arch lib=$2 srepos=("${DEVTOOLS_VALID_REPOS[@]}")
 
     if [[ $repo != all ]]; then
-        if ! in_array "${repo}" "${_repos[@]}"; then
+        if ! in_array "${repo}" "${DEVTOOLS_VALID_REPOS[@]}"; then
             echo "${BASH_SOURCE[0]##*/}: unrecognized repo '$repo'"
             echo "Try '${BASH_SOURCE[0]##*/} --help' for more information."
             exit 1