Merge branch 'make-warning-to-error' into 'master'

feat(commitpkg): Change warning to hard error when licensing information is absent

See merge request archlinux/devtools!324

Makefile

@@ -1,6 +1,6 @@
 SHELL=/bin/bash -o pipefail
 
-V=1.2.1
+V=1.4.0
 BUILDTOOLVER ?= $(V)
 
 PREFIX = /usr/local
@@ -19,6 +19,7 @@ PACMAN_CONFIGS=$(wildcard config/pacman/*)
 GIT_CONFIGS = $(wildcard config/git/*)
 SETARCH_ALIASES = $(wildcard config/setarch-aliases.d/*)
 MANS = $(addprefix $(BUILDDIR)/,$(patsubst %.asciidoc,%,$(wildcard doc/man/*.asciidoc)))
+DATA_FILES = $(wildcard data/*)
 
 COMMITPKG_LINKS = \
 	core-testingpkg \
@@ -59,7 +60,7 @@ BATS_ARGS ?= --jobs $(JOBS) $(BATS_EXTRA_ARGS) --verbose-run
 COVERAGE_DIR ?= $(BUILDDIR)/coverage
 
 
-all: binprogs library conf completion man
+all: binprogs library conf completion man data
 binprogs: $(BINPROGS)
 library: $(LIBRARY)
 completion: $(COMPLETIONS)
@@ -106,12 +107,16 @@ $(BUILDDIR)/doc/man/%: doc/man/%.asciidoc doc/man/include/footer.asciidoc
 
 conf:
 	@install -d $(BUILDDIR)/makepkg.conf.d
-	@cp -a $(MAKEPKG_CONFIGS) $(BUILDDIR)/makepkg.conf.d
+	@cp -ra $(MAKEPKG_CONFIGS) $(BUILDDIR)/makepkg.conf.d
 	@install -d $(BUILDDIR)/pacman.conf.d
 	@cp -a $(PACMAN_CONFIGS) $(BUILDDIR)/pacman.conf.d
 	@install -d $(BUILDDIR)/git.conf.d
 	@cp -a $(GIT_CONFIGS) $(BUILDDIR)/git.conf.d
 
+data:
+	@install -d $(BUILDDIR)/data
+	@cp -ra $(DATA_FILES) $(BUILDDIR)/data
+
 clean:
 	rm -rf $(BUILDDIR)
 
@@ -122,9 +127,11 @@ install: all
 	install -dm0755 $(DESTDIR)$(DATADIR)/pacman.conf.d
 	install -m0755 ${BINPROGS} $(DESTDIR)$(PREFIX)/bin
 	install -dm0755 $(DESTDIR)$(DATADIR)/lib
+	install -dm0755 $(DESTDIR)$(DATADIR)/data
 	cp -ra $(BUILDDIR)/lib/* $(DESTDIR)$(DATADIR)/lib
 	cp -a $(BUILDDIR)/git.conf.d -t $(DESTDIR)$(DATADIR)
-	for conf in $(notdir $(MAKEPKG_CONFIGS)); do install -Dm0644 $(BUILDDIR)/makepkg.conf.d/$$conf $(DESTDIR)$(DATADIR)/makepkg.conf.d/$${conf##*/}; done
+	cp -ra $(BUILDDIR)/makepkg.conf.d -t $(DESTDIR)$(DATADIR)
+	cp -ra $(BUILDDIR)/data -t $(DESTDIR)$(DATADIR)
 	for conf in $(notdir $(PACMAN_CONFIGS)); do install -Dm0644 $(BUILDDIR)/pacman.conf.d/$$conf $(DESTDIR)$(DATADIR)/pacman.conf.d/$${conf##*/}; done
 	for a in ${SETARCH_ALIASES}; do install -m0644 $$a -t $(DESTDIR)$(DATADIR)/setarch-aliases.d; done
 	for l in ${COMMITPKG_LINKS}; do ln -sf commitpkg $(DESTDIR)$(PREFIX)/bin/$$l; done
@@ -142,7 +149,8 @@ uninstall:
 	for f in $(notdir $(LIBRARY)); do rm -f $(DESTDIR)$(DATADIR)/lib/$$f; done
 	rm -rf $(DESTDIR)$(DATADIR)/lib
 	rm -rf $(DESTDIR)$(DATADIR)/git.conf.d
-	for conf in $(notdir $(MAKEPKG_CONFIGS)); do rm -f $(DESTDIR)$(DATADIR)/makepkg.conf.d/$${conf##*/}; done
+	rm -rf $(DESTDIR)$(DATADIR)/makepkg.conf.d
+	rm -rf $(DESTDIR)$(DATADIR)/data
 	for conf in $(notdir $(PACMAN_CONFIGS)); do rm -f $(DESTDIR)$(DATADIR)/pacman.conf.d/$${conf##*/}; done
 	for f in $(notdir $(SETARCH_ALIASES)); do rm -f $(DESTDIR)$(DATADIR)/setarch-aliases.d/$$f; done
 	for l in ${COMMITPKG_LINKS}; do rm -f $(DESTDIR)$(PREFIX)/bin/$$l; done
@@ -154,7 +162,6 @@ uninstall:
 	for manfile in $(notdir $(MANS)); do rm -f $(DESTDIR)$(MANDIR)/man$${manfile##*.}/$${manfile}; done;
 	rmdir --ignore-fail-on-non-empty \
 		$(DESTDIR)$(DATADIR)/setarch-aliases.d \
-		$(DESTDIR)$(DATADIR)/makepkg.conf.d \
 		$(DESTDIR)$(DATADIR)/pacman.conf.d \
 		$(DESTDIR)$(DATADIR)
 
@@ -187,5 +194,5 @@ coverage: binprogs library conf completion man
 check: $(BINPROGS_SRC) $(LIBRARY_SRC) contrib/completion/bash/devtools.in config/makepkg/x86_64.conf contrib/makepkg/PKGBUILD.proto
 	shellcheck $^
 
-.PHONY: all binprogs library completion conf man clean install uninstall tag dist upload test coverage check
+.PHONY: all binprogs library completion conf man data clean install uninstall tag dist upload test coverage check
 .DELETE_ON_ERROR:

README.md

@@ -74,7 +74,9 @@ Component: pkgctl db remove
 - expac
 - fakeroot
 - findutils
+- glow
 - grep
+- gum
 - jq
 - ncurses
 - openssh
@@ -92,6 +94,7 @@ Component: pkgctl db remove
 
 - bat (pretty printing)
 - nvchecker (version checking)
+- reuse (license compliance)
 
 ### Development Dependencies
 

config/git/template/info/exclude

@@ -2,6 +2,7 @@
 /src
 /*/
 !/keys/
+!/LICENSES/
 
 /*.log
 /*.tar.*

config/makepkg/conf.d/fortran.conf

@@ -0,0 +1,22 @@
+#!/hint/bash
+# shellcheck disable=2034
+
+#
+# /etc/makepkg.conf.d/fortran.conf
+#
+
+#########################################################################
+# FORTRAN LANGUAGE SUPPORT
+#########################################################################
+
+# Flags used for the Fortran compiler, similar in spirit to CFLAGS. Read
+# linkman:gfortran[1] for more details on the available flags.
+FFLAGS="-march=x86-64 -mtune=generic -O2 -pipe -fno-plt \
+        -Wp,-D_FORTIFY_SOURCE=3 -fstack-clash-protection -fcf-protection \
+        -fno-omit-frame-pointer -mno-omit-leaf-frame-pointer"
+FCFLAGS="$FFLAGS"
+
+# Additional compiler flags appended to `FFLAGS` and `FCFLAGS` for use in debugging. Usually
+# this would include: ``-g''. Read linkman:gfortran[1] for more details on the wide
+# variety of compiler flags available.
+DEBUG_FFLAGS="-g"

config/makepkg/conf.d/rust.conf

@@ -0,0 +1,19 @@
+#!/hint/bash
+# shellcheck disable=2034
+
+#
+# /etc/makepkg.conf.d/rust.conf
+#
+
+#########################################################################
+# RUST LANGUAGE SUPPORT
+#########################################################################
+
+# Flags used for the Rust compiler, similar in spirit to CFLAGS. Read
+# linkman:rustc[1] for more details on the available flags.
+RUSTFLAGS="-C force-frame-pointers=yes"
+
+# Additional compiler flags appended to `RUSTFLAGS` for use in debugging.
+# Usually this would include: ``-C debuginfo=2''. Read linkman:rustc[1] for
+# more details on the available flags.
+DEBUG_RUSTFLAGS="-C debuginfo=2"

config/makepkg/x86_64.conf

@@ -48,13 +48,11 @@ CXXFLAGS="$CFLAGS -Wp,-D_GLIBCXX_ASSERTIONS"
 LDFLAGS="-Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now \
          -Wl,-z,pack-relative-relocs"
 LTOFLAGS="-flto=auto"
-RUSTFLAGS="-Cforce-frame-pointers=yes"
 #-- Make Flags: change this for DistCC/SMP systems
 #MAKEFLAGS="-j2"
 #-- Debugging flags
 DEBUG_CFLAGS="-g"
 DEBUG_CXXFLAGS="$DEBUG_CFLAGS"
-DEBUG_RUSTFLAGS="-C debuginfo=2"
 
 #########################################################################
 # BUILD ENVIRONMENT
@@ -83,7 +81,7 @@ BUILDENV=(!distcc color !ccache check !sign)
 #   These are default values for the options=() settings
 #########################################################################
 #
-# Makepkg defaults: OPTIONS=(!strip docs libtool staticlibs emptydirs !zipman !purge !debug !lto)
+# Makepkg defaults: OPTIONS=(!strip docs libtool staticlibs emptydirs !zipman !purge !debug !lto !autodeps)
 #  A negated option will do the opposite of the comments below.
 #
 #-- strip:      Strip symbols from binaries/libraries
@@ -95,6 +93,7 @@ BUILDENV=(!distcc color !ccache check !sign)
 #-- purge:      Remove files specified by PURGE_TARGETS
 #-- debug:      Add debugging flags as specified in DEBUG_* variables
 #-- lto:        Add compile flags for building with link time optimization
+#-- autodeps:   Automatically add depends/provides
 #
 OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge debug lto)
 
@@ -114,6 +113,8 @@ DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
 PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
 #-- Directory to store source code in for debug packages
 DBGSRCDIR="/usr/src/debug"
+#-- Prefix and directories for library autodeps
+LIB_DIRS=('lib:usr/lib' 'lib32:usr/lib32')
 
 #########################################################################
 # PACKAGE OUTPUT

config/makepkg/x86_64.conf.d/fortran.conf

@@ -0,0 +1 @@
+../conf.d/fortran.conf

config/makepkg/x86_64.conf.d/rust.conf

@@ -0,0 +1 @@
+../conf.d/rust.conf

config/makepkg/x86_64_v3.conf

@@ -48,13 +48,11 @@ CXXFLAGS="$CFLAGS -Wp,-D_GLIBCXX_ASSERTIONS"
 LDFLAGS="-Wl,-O1 -Wl,--sort-common -Wl,--as-needed -Wl,-z,relro -Wl,-z,now \
          -Wl,-z,pack-relative-relocs"
 LTOFLAGS="-flto=auto"
-RUSTFLAGS="-Cforce-frame-pointers=yes"
 #-- Make Flags: change this for DistCC/SMP systems
 #MAKEFLAGS="-j2"
 #-- Debugging flags
 DEBUG_CFLAGS="-g"
 DEBUG_CXXFLAGS="$DEBUG_CFLAGS"
-DEBUG_RUSTFLAGS="-C debuginfo=2"
 
 #########################################################################
 # BUILD ENVIRONMENT
@@ -83,7 +81,7 @@ BUILDENV=(!distcc color !ccache check !sign)
 #   These are default values for the options=() settings
 #########################################################################
 #
-# Makepkg defaults: OPTIONS=(!strip docs libtool staticlibs emptydirs !zipman !purge !debug !lto)
+# Makepkg defaults: OPTIONS=(!strip docs libtool staticlibs emptydirs !zipman !purge !debug !lto !autodeps)
 #  A negated option will do the opposite of the comments below.
 #
 #-- strip:      Strip symbols from binaries/libraries
@@ -95,6 +93,7 @@ BUILDENV=(!distcc color !ccache check !sign)
 #-- purge:      Remove files specified by PURGE_TARGETS
 #-- debug:      Add debugging flags as specified in DEBUG_* variables
 #-- lto:        Add compile flags for building with link time optimization
+#-- autodeps:   Automatically add depends/provides
 #
 OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge debug lto)
 
@@ -114,6 +113,8 @@ DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
 PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
 #-- Directory to store source code in for debug packages
 DBGSRCDIR="/usr/src/debug"
+#-- Prefix and directories for library autodeps
+LIB_DIRS=('lib:usr/lib' 'lib32:usr/lib32')
 
 #########################################################################
 # PACKAGE OUTPUT

config/makepkg/x86_64_v3.conf.d/fortran.conf

@@ -0,0 +1 @@
+../conf.d/fortran.conf

config/makepkg/x86_64_v3.conf.d/rust.conf

@@ -0,0 +1 @@
+../conf.d/rust.conf

config/pacman/core-staging-x86_64_v3.conf

@@ -36,6 +36,8 @@ NoProgressBar
 #CheckSpace
 VerbosePkgLists
 ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.

config/pacman/core-staging.conf

@@ -36,6 +36,8 @@ NoProgressBar
 #CheckSpace
 VerbosePkgLists
 ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.

config/pacman/core-testing-x86_64_v3.conf

@@ -36,6 +36,8 @@ NoProgressBar
 #CheckSpace
 VerbosePkgLists
 ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.

config/pacman/core-testing.conf

@@ -36,6 +36,8 @@ NoProgressBar
 #CheckSpace
 VerbosePkgLists
 ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.

config/pacman/extra-staging-x86_64_v3.conf

@@ -36,6 +36,8 @@ NoProgressBar
 #CheckSpace
 VerbosePkgLists
 ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.

config/pacman/extra-staging.conf

@@ -36,6 +36,8 @@ NoProgressBar
 #CheckSpace
 VerbosePkgLists
 ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.

config/pacman/extra-testing-x86_64_v3.conf

@@ -36,6 +36,8 @@ NoProgressBar
 #CheckSpace
 VerbosePkgLists
 ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.

config/pacman/extra-testing.conf

@@ -36,6 +36,8 @@ NoProgressBar
 #CheckSpace
 VerbosePkgLists
 ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.

config/pacman/extra-x86_64_v3.conf

@@ -36,6 +36,8 @@ NoProgressBar
 #CheckSpace
 VerbosePkgLists
 ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.

config/pacman/extra.conf

@@ -36,6 +36,8 @@ NoProgressBar
 #CheckSpace
 VerbosePkgLists
 ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.

config/pacman/gnome-unstable.conf

@@ -36,6 +36,8 @@ NoProgressBar
 #CheckSpace
 VerbosePkgLists
 ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.

config/pacman/kde-unstable.conf

@@ -36,6 +36,8 @@ NoProgressBar
 #CheckSpace
 VerbosePkgLists
 ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.

config/pacman/multilib-staging.conf

@@ -36,6 +36,8 @@ NoProgressBar
 #CheckSpace
 VerbosePkgLists
 ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.

config/pacman/multilib-testing.conf

@@ -36,6 +36,8 @@ NoProgressBar
 #CheckSpace
 VerbosePkgLists
 ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.

config/pacman/multilib.conf

@@ -36,6 +36,8 @@ NoProgressBar
 #CheckSpace
 VerbosePkgLists
 ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.

config/pacman/universe.conf

@@ -36,6 +36,8 @@ NoProgressBar
 #CheckSpace
 VerbosePkgLists
 ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.

config/pacman/unstable.conf

@@ -36,6 +36,8 @@ NoProgressBar
 #CheckSpace
 VerbosePkgLists
 ParallelDownloads = 5
+DownloadUser = alpm
+#DisableSandbox
 
 # By default, pacman accepts packages signed by keys that its local keyring
 # trusts (see pacman-key and its man page), as well as unsigned packages.

contrib/completion/bash/devtools.in

@@ -13,6 +13,10 @@ source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-repos.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-inspect.sh
 # shellcheck source=src/lib/valid-search.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-search.sh
+# shellcheck source=src/lib/valid-version.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-version.sh
+# shellcheck source=src/lib/valid-issue.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-issue.sh
 
 _colors=(never always auto)
 
@@ -145,6 +149,8 @@ _pkgctl_cmds=(
 	build
 	db
 	diff
+	issue
+	license
 	release
 	repo
 	search
@@ -362,6 +368,25 @@ _pkgctl_repo_switch_opts() {
 	fi
 }
 
+_pkgctl_license_cmds=(
+	check
+	setup
+)
+
+_pkgctl_license_check_args=(
+	-h --help
+)
+
+_pkgctl_license_check_opts() { _filedir -d; }
+
+_pkgctl_license_setup_args=(
+	--no-check
+	-f --force
+	-h --help
+)
+
+_pkgctl_license_setup_opts() { _filedir -d; }
+
 _pkgctl_version_cmds=(
 	check
 	setup
@@ -371,14 +396,19 @@ _pkgctl_version_cmds=(
 _pkgctl_version_check_args=(
 	-v --verbose
 	-h --help
+	--json
+	-F --format
 )
 
 _pkgctl_version_check_opts() { _filedir -d; }
+_pkgctl_version_check_args__format_opts() { _devtools_completions_version_output_format; }
+_pkgctl_version_check_args_F_opts() { _devtools_completions_version_output_format; }
 
 _pkgctl_version_setup_args=(
 	--prefer-platform-api
 	--url
 	--no-check
+	--no-upstream
 	-f --force
 	-h --help
 )
@@ -436,6 +466,185 @@ _pkgctl_diff_args__pool_opts() { _filedir -d; }
 _pkgctl_diff_args_P_opts() { _pkgctl_diff_args__pool_opts; }
 _pkgctl_diff_opts() { _devtools_completions_all_packages; }
 
+_pkgctl_issue_cmds=(
+	close
+	comment
+	create
+	edit
+	list
+	move
+	reopen
+	view
+)
+
+_pkgctl_issue_args=(
+	-h --help
+)
+
+_pkgctl_issue_close_args=(
+	-p --package
+	-m --message
+	-e --edit
+	-r --resolution
+	-h --help
+)
+
+_pkgctl_issue_close_opts() { :; }
+_pkgctl_issue_close_args__package_opts() { _devtools_completions_all_packages; }
+_pkgctl_issue_close_args_p_opts() { _pkgctl_issue_close_args__package_opts; }
+_pkgctl_issue_close_args__message_opts() { :; }
+_pkgctl_issue_close_args_m_opts() { _pkgctl_issue_close_args__message_opts; }
+_pkgctl_issue_close_args__resolution_opts() { _devtools_completions_issue_resolution; }
+_pkgctl_issue_close_args_r_opts() { _pkgctl_issue_close_args__resolution_opts; }
+
+_pkgctl_issue_comment_args=(
+	-p --package
+	-m --message
+	-e --edit
+	-h --help
+)
+
+_pkgctl_issue_comment_opts() { :; }
+_pkgctl_issue_comment_args__package_opts() { _devtools_completions_all_packages; }
+_pkgctl_issue_comment_args_p_opts() { _pkgctl_issue_comment_args__package_opts; }
+_pkgctl_issue_comment_args__message_opts() { :; }
+_pkgctl_issue_comment_args_m_opts() { _pkgctl_issue_comment_args__message_opts; }
+
+_pkgctl_issue_create_args=(
+	-p --package
+	-t --title
+	-F --file
+	-e --edit
+	-w --web
+	--recover
+	--confidentiality
+	--priority
+	--scope
+	--severity
+	--status
+	-h --help
+)
+
+_pkgctl_issue_create_opts() { :; }
+_pkgctl_issue_create_args__package_opts() { _devtools_completions_all_packages; }
+_pkgctl_issue_create_args_p_opts() { _pkgctl_issue_create_args__package_opts; }
+_pkgctl_issue_create_args__title_opts() { :; }
+_pkgctl_issue_create_args_t_opts() { _pkgctl_issue_create_args__title_opts; }
+_pkgctl_issue_create_args__confidentiality_opts() { _devtools_completions_issue_confidentiality; }
+_pkgctl_issue_create_args__priority_opts() { _devtools_completions_issue_priority; }
+_pkgctl_issue_create_args__scope_opts() { _devtools_completions_issue_scope; }
+_pkgctl_issue_create_args__severity_opts() { _devtools_completions_issue_severity; }
+_pkgctl_issue_create_args__status_opts() { _devtools_completions_issue_status; }
+
+_pkgctl_issue_edit_args=(
+	-p --package
+	-t --title
+	-e --edit
+	--recover
+	--confidentiality
+	--priority
+	--resolution
+	--scope
+	--severity
+	--status
+	-h --help
+)
+
+_pkgctl_issue_edit_opts() { :; }
+_pkgctl_issue_edit_args__package_opts() { _devtools_completions_all_packages; }
+_pkgctl_issue_edit_args_p_opts() { _pkgctl_issue_edit_args__package_opts; }
+_pkgctl_issue_edit_args__title_opts() { :; }
+_pkgctl_issue_edit_args_t_opts() { _pkgctl_issue_edit_args__title_opts; }
+_pkgctl_issue_edit_args__confidentiality_opts() { _devtools_completions_issue_confidentiality; }
+_pkgctl_issue_edit_args__priority_opts() { _devtools_completions_issue_priority; }
+_pkgctl_issue_edit_args__resolution_opts() { _devtools_completions_issue_resolution; }
+_pkgctl_issue_edit_args__scope_opts() { _devtools_completions_issue_scope; }
+_pkgctl_issue_edit_args__severity_opts() { _devtools_completions_issue_severity; }
+_pkgctl_issue_edit_args__status_opts() { _devtools_completions_issue_status; }
+
+_pkgctl_issue_list_args=(
+	-g --group
+	-w --web
+	-A --all
+	-c --closed
+	-U --unconfirmed
+	--search
+	--in
+	-l --label
+	--confidentiality
+	--priority
+	--resolution
+	--scope
+	--severity
+	--status
+	--assignee
+	--assigned-to-me
+	--author
+	--created-by-me
+	-h --help
+)
+
+_pkgctl_issue_list_opts() { _devtools_completions_all_packages; }
+_pkgctl_issue_list_args__search_opts() { :; }
+_pkgctl_issue_list_args__in_opts() { _devtools_completions_issue_search_location; }
+_pkgctl_issue_list_args__label_opts() { :; }
+_pkgctl_issue_list_args_l_opts() { _pkgctl_issue_list_args__label_opts; }
+_pkgctl_issue_list_args__confidentiality_opts() { _devtools_completions_issue_confidentiality; }
+_pkgctl_issue_list_args__priority_opts() { _devtools_completions_issue_priority; }
+_pkgctl_issue_list_args__resolution_opts() { _devtools_completions_issue_resolution; }
+_pkgctl_issue_list_args__scope_opts() { _devtools_completions_issue_scope; }
+_pkgctl_issue_list_args__severity_opts() { _devtools_completions_issue_severity; }
+_pkgctl_issue_list_args__status_opts() { _devtools_completions_issue_status; }
+_pkgctl_issue_list_args__assignee_opts() { :; }
+_pkgctl_issue_list_args__author_opts() { :; }
+
+_pkgctl_issue_move_args=(
+	-p --package
+	-m --message
+	-e --edit
+	-h --help
+)
+
+_pkgctl_issue_move_opts() {
+	local subcommand args
+	subcommand=(repo switch)
+	args=$(__pkgctl_word_count_after_subcommand "${subcommand[@]}")
+
+	if (( args == 0 )); then
+		:
+	elif (( args >= 1 )); then
+		_devtools_completions_all_packages
+	fi
+}
+_pkgctl_issue_move_args__package_opts() { _devtools_completions_all_packages; }
+_pkgctl_issue_move_args_p_opts() { _pkgctl_issue_move_args__package_opts; }
+_pkgctl_issue_move_args__message_opts() { :; }
+_pkgctl_issue_move_args_m_opts() { _pkgctl_issue_move_args__message_opts; }
+
+_pkgctl_issue_reopen_args=(
+	-p --package
+	-m --message
+	-e --edit
+	-h --help
+)
+
+_pkgctl_issue_reopen_opts() { :; }
+_pkgctl_issue_reopen_args__package_opts() { _devtools_completions_all_packages; }
+_pkgctl_issue_reopen_args_p_opts() { _pkgctl_issue_reopen_args__package_opts; }
+_pkgctl_issue_reopen_args__message_opts() { :; }
+_pkgctl_issue_reopen_args_m_opts() { _pkgctl_issue_reopen_args__message_opts; }
+
+_pkgctl_issue_view_args=(
+	-p --package
+	-c --comments
+	-w --web
+	-h --help
+)
+
+_pkgctl_issue_view_opts() { :; }
+_pkgctl_issue_view_args__package_opts() { _devtools_completions_all_packages; }
+_pkgctl_issue_view_args_p_opts() { _pkgctl_issue_view_args__package_opts; }
+
 
 _pkgctl_version_args=(
 	-h --help
@@ -470,6 +679,30 @@ _devtools_completions_inspect() {
 _devtools_completions_search_format() {
 	mapfile -t COMPREPLY < <(compgen -W "${valid_search_output_format[*]}" -- "$cur")
 }
+_devtools_completions_version_output_format() {
+	mapfile -t COMPREPLY < <(compgen -W "${DEVTOOLS_VALID_VERSION_OUTPUT_FORMAT[*]}" -- "$cur")
+}
+_devtools_completions_issue_severity() {
+	mapfile -t COMPREPLY < <(compgen -W "${DEVTOOLS_VALID_ISSUE_SEVERITY[*]}" -- "$cur")
+}
+_devtools_completions_issue_status() {
+	mapfile -t COMPREPLY < <(compgen -W "${DEVTOOLS_VALID_ISSUE_STATUS[*]}" -- "$cur")
+}
+_devtools_completions_issue_scope() {
+	mapfile -t COMPREPLY < <(compgen -W "${DEVTOOLS_VALID_ISSUE_SCOPE[*]}" -- "$cur")
+}
+_devtools_completions_issue_search_location() {
+	mapfile -t COMPREPLY < <(compgen -W "${DEVTOOLS_VALID_ISSUE_SEARCH_LOCATION[*]}" -- "$cur")
+}
+_devtools_completions_issue_resolution() {
+	mapfile -t COMPREPLY < <(compgen -W "${DEVTOOLS_VALID_ISSUE_RESOLUTION[*]}" -- "$cur")
+}
+_devtools_completions_issue_priority() {
+	mapfile -t COMPREPLY < <(compgen -W "${DEVTOOLS_VALID_ISSUE_PRIORITY[*]}" -- "$cur")
+}
+_devtools_completions_issue_confidentiality() {
+	mapfile -t COMPREPLY < <(compgen -W "${DEVTOOLS_VALID_ISSUE_CONFIDENTIALITY[*]}" -- "$cur")
+}
 
 __devtools_complete() {
 	local service=$1

contrib/completion/zsh/_devtools.in

@@ -13,6 +13,10 @@ source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-repos.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-inspect.sh
 # shellcheck source=src/lib/valid-search.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-search.sh
+# shellcheck source=src/lib/valid-version.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-version.sh
+# shellcheck source=src/lib/valid-issue.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-issue.sh
 
 _colors=(never always auto)
 
@@ -57,7 +61,7 @@ _pkgctl_build_args=(
 	'--update-checksums[Force computation and update of the checksums (disables auto-detection)]'
 	'(-e --edit)'{-e,--edit}'[Edit the PKGBUILD before building]'
 	'(-r --release)'{-r,--release}'[Automatically commit, tag and release after building]'
-	'(-m --message=)'{-m,--message=}"[Use the given <msg> as the commit message]:message:"
+	'(-m --message)'{-m,--message}"[Use the given <msg> as the commit message]:message:"
 	'(-u --db-update)'{-u,--db-update}'[Automatically update the pacman database as last action]'
 	'(-h --help)'{-h,--help}'[Display usage]'
 	'*:git_dir:_files -/'
@@ -90,9 +94,115 @@ _pkgctl_db_update_args=(
 	'(-h --help)'{-h,--help}'[Display usage]'
 )
 
+_pkgctl_issue_cmds=(
+	"pkgctl issue command"
+	"close[Close an issue]"
+	"comment[Comment on an issue]"
+	"create[Create a new issue]"
+	"edit[Edit and modify an issue]"
+	"list[List project or group issues]"
+	"move[Move an issue to another project]"
+	"reopen[Reopen a closed issue]"
+	"view[Display information about an issue]"
+)
+
+_pkgctl_issue_close_args=(
+	'(-p --package)'{-p,--package}'[Interact with <pkgbase> instead of the current directory]:pkgbase:_devtools_completions_all_packages'
+	'(-m --message)'{-m,--message}'[Use the provided message as the comment]:message:'
+	'(-e --edit)'{-e,--edit}'[Edit the comment using an editor]'
+	'(-r --resolution)'{-r,--resolution}"[Set a specific resolution label]:resolution:($DEVTOOLS_VALID_ISSUE_RESOLUTION[*])"
+	'(-h --help)'{-h,--help}'[Display usage]'
+	"1:issue_iid:"
+)
+
+_pkgctl_issue_comment_args=(
+	'(-p --package)'{-p,--package}'[Interact with <pkgbase> instead of the current directory]:pkgbase:_devtools_completions_all_packages'
+	'(-m --message)'{-m,--message}'[Use the provided message as the comment]:message:'
+	'(-e --edit)'{-e,--edit}'[Edit the comment using an editor]'
+	'(-h --help)'{-h,--help}'[Display usage]'
+	"1:issue_iid:"
+)
+
+_pkgctl_issue_create_args=(
+	'(-p --package)'{-p,--package}'[Interact with <pkgbase> instead of the current directory]:pkgbase:_devtools_completions_all_packages'
+	'(-t --title)'{-t,--title}'[Use the provided title for the issue]:title:'
+	'(-F --file)'{-F,--file}'[Take issue description from <file>]:file:_files'
+	'(-e --edit)'{-e,--edit}'[Edit the issue title and description using an editor]'
+	'(-w --web)'{-w,--web}'[Continue issue creation with the web interface]'
+	"--recover[Automatically recover from a failed run]"
+	"--confidentiality[Set the issue confidentiality]:confidential:($DEVTOOLS_VALID_ISSUE_CONFIDENTIALITY[*])"
+	"--priority[Set the priority label]:priority:($DEVTOOLS_VALID_ISSUE_PRIORITY[*])"
+	"--scope[Set the scope label]:scope:($DEVTOOLS_VALID_ISSUE_SCOPE[*])"
+	"--severity[Set the severity label]:severity:($DEVTOOLS_VALID_ISSUE_SEVERITY[*])"
+	"--status[Set the status label]:status:($DEVTOOLS_VALID_ISSUE_STATUS[*])"
+	'(-h --help)'{-h,--help}'[Display usage]'
+)
+
+_pkgctl_issue_edit_args=(
+	'(-p --package)'{-p,--package}'[Interact with <pkgbase> instead of the current directory]:pkgbase:_devtools_completions_all_packages'
+	'(-t --title)'{-t,--title}'[Use the provided title for the issue]:title:'
+	'(-e --edit)'{-e,--edit}'[Edit the issue title and description using an editor]'
+	"--recover[Automatically recover from a failed run]"
+	"--confidentiality[Set the issue confidentiality]:confidential:($DEVTOOLS_VALID_ISSUE_CONFIDENTIALITY[*])"
+	"--priority[Set the priority label]:priority:($DEVTOOLS_VALID_ISSUE_PRIORITY[*])"
+	"--resolution[Set the resolution label]:resolution:($DEVTOOLS_VALID_ISSUE_RESOLUTION[*])"
+	"--scope[Set the scope label]:scope:($DEVTOOLS_VALID_ISSUE_SCOPE[*])"
+	"--severity[Set the severity label]:severity:($DEVTOOLS_VALID_ISSUE_SEVERITY[*])"
+	"--status[Set the status label]:status:($DEVTOOLS_VALID_ISSUE_STATUS[*])"
+	'(-h --help)'{-h,--help}'[Display usage]'
+	"1:issue_iid:"
+)
+
+_pkgctl_issue_list_args=(
+	'(-g --group)'{-g,--group}'[Get issues from the whole packaging subgroup]'
+	'(-w --web)'{-w,--web}'[View results in a browser]'
+	'(-A --all)'{-A,--all}'[Get all issues including closed]'
+	'(-c --closed)'{-c,--closed}'[Get only closed issues]'
+	'(-U --unconfirmed)'{-U,--unconfirmed}'[Shorthand to filter by unconfirmed status label]'
+	'--search[Search in the fields defined by --in]:search:'
+	"--in[Search in title or description]:location:($DEVTOOLS_VALID_ISSUE_SEARCH_LOCATION[*])"
+	"--confidentiality[Filter by confidentiality]:confidential:($DEVTOOLS_VALID_ISSUE_CONFIDENTIALITY[*])"
+	"--priority[Shorthand to filter by priority label]:priority:($DEVTOOLS_VALID_ISSUE_PRIORITY[*])"
+	"--resolution[Shorthand to filter by resolution label]:resolution:($DEVTOOLS_VALID_ISSUE_RESOLUTION[*])"
+	"--scope[Shorthand to filter by scope label]:scope:($DEVTOOLS_VALID_ISSUE_SCOPE[*])"
+	"--severity[Shorthand to filter by severity label]:severity:($DEVTOOLS_VALID_ISSUE_SEVERITY[*])"
+	"--status[Shorthand to filter by status label]:status:($DEVTOOLS_VALID_ISSUE_STATUS[*])"
+	'--assignee[Filter issues assigned to the given username]:username:'
+	'--assigned-to-me[Shorthand to filter issues assigned to you]'
+	'--author[Filter issues authored by the given username]:username:'
+	'--created-by-me[Shorthand to filter issues created by you]'
+	'(-h --help)'{-h,--help}'[Display usage]'
+	'*:pkgbase:_devtools_completions_all_packages'
+)
+
+_pkgctl_issue_move_args=(
+	'(-p --package)'{-p,--package}'[Interact with <pkgbase> instead of the current directory]:pkgbase:_devtools_completions_all_packages'
+	'(-m --message)'{-m,--message}'[Use the provided message as the comment]:message:'
+	'(-e --edit)'{-e,--edit}'[Edit the comment using an editor]'
+	'(-h --help)'{-h,--help}'[Display usage]'
+	"1:issue_iid:"
+	'1:pkgbase:_devtools_completions_all_packages'
+)
+
+_pkgctl_issue_reopen_args=(
+	'(-p --package)'{-p,--package}'[Interact with <pkgbase> instead of the current directory]:pkgbase:_devtools_completions_all_packages'
+	'(-m --message)'{-m,--message}'[Use the provided message as the comment]:message:'
+	'(-e --edit)'{-e,--edit}'[Edit the comment using an editor]'
+	'(-h --help)'{-h,--help}'[Display usage]'
+	"1:issue_iid:"
+)
+
+_pkgctl_issue_view_args=(
+	'(-p --package)'{-p,--package}'[Interact with <pkgbase> instead of the current directory]:pkgbase:_devtools_completions_all_packages'
+	'(-c --comments)'{-c,--comments}'[Show issue comments and activities]'
+	'(-w --web)'{-w,--web}'[View results in a browser]'
+	'(-h --help)'{-h,--help}'[Display usage]'
+	"1:issue_iid:"
+)
+
 _pkgctl_release_args=(
-	'(-m --message=)'{-m,--message=}"[Use the given <msg> as the commit message]:message:"
-	'(-r --repo=)'{-r,--repo=}"[Specify a target repository for new packages]:repo:($DEVTOOLS_VALID_REPOS[*])"
+	'(-m --message)'{-m,--message}"[Use the given <msg> as the commit message]:message:"
+	'(-r --repo)'{-r,--repo}"[Specify a target repository for new packages]:repo:($DEVTOOLS_VALID_REPOS[*])"
 	'(-s --staging)'{-s,--staging}'[Release to the staging counterpart of the auto-detected repo]'
 	'(-t --testing)'{-t,--testing}'[Release to the testing counterpart of the auto-detected repo]'
 	'(-u --db-update)'{-u,--db-update}'[Automatically update the pacman database after uploading]'
@@ -288,6 +398,8 @@ _pkgctl_cmds=(
 	"build[Build packages inside a clean chroot]"
 	"db[Pacman database modification for package update, move etc]"
 	"diff[Compare package files using different modes]"
+	"issue[Work with GitLab packaging issues]"
+	"license[Check and manage package license compliance]"
 	"release[Release step to commit, tag and upload build artifacts]"
 	"repo[Manage Git packaging repositories and their configuration]"
 	"search[Search for an expression across the GitLab packaging group]"
@@ -299,6 +411,24 @@ _pkgctl_args=(
 	'(-h --help)'{-h,--help}'[Display usage]'
 )
 
+_pkgctl_license_cmds=(
+	"pkgctl license command"
+	"check[Checks package licensing compliance using REUSE]"
+	"setup[Automatically detect and setup a basic REUSE config]"
+)
+
+_pkgctl_license_check_args=(
+	'(-h --help)'{-h,--help}'[Display usage]'
+	'*:git_dir:_files -/'
+)
+
+_pkgctl_license_setup_args=(
+	'(-f --force)'{-f,--force}'[Overwrite existing REUSE config]'
+	'--no-check[Do not run license check after setup]'
+	'(-h --help)'{-h,--help}'[Display usage]'
+	'*:git_dir:_files -/'
+)
+
 _pkgctl_version_cmds=(
 	"pkgctl version command"
 	"check[Compares local package versions against upstream versions]"
@@ -307,8 +437,10 @@ _pkgctl_version_cmds=(
 )
 
 _pkgctl_version_check_args=(
-	'(-v --verbose)'{-v,--verbose}'[Display results including up-to-date versions]'
 	'(-h --help)'{-h,--help}'[Display usage]'
+	'(-v --verbose)'{-v,--verbose}'[Display all results including up-to-date versions]'
+	'--json[Enable printing results in JSON]'
+	'(-F --format)'{-F,--format}"[Controls the output format of the results]:format:($DEVTOOLS_VALID_VERSION_OUTPUT_FORMAT[*])"
 	'*:git_dir:_files -/'
 )
 
@@ -317,6 +449,7 @@ _pkgctl_version_setup_args=(
 	'--prefer-platform-api[Prefer platform specific GitHub/GitLab API for complex cases]'
 	'--url[Derive check target from URL instead of source array]:url:'
 	'--no-check[Do not run version check after setup]'
+	'--no-upstream[Setup a blank config for packages without upstream sources]'
 	'(-h --help)'{-h,--help}'[Display usage]'
 	'*:git_dir:_files -/'
 )

data/LICENSE

@@ -0,0 +1,12 @@
+Copyright Arch Linux Contributors
+
+Permission to use, copy, modify, and/or distribute this software for
+any purpose with or without fee is hereby granted.
+
+THE SOFTWARE IS PROVIDED “AS IS” AND THE AUTHOR DISCLAIMS ALL
+WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES
+OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE
+FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY
+DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
+AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

doc/man/arch-nspawn.1.asciidoc

@@ -23,7 +23,8 @@ Options
 	Location of a pacman config file
 
 *-M* <file>::
-	Location of a makepkg config file
+	Location of a makepkg config file. Specific additions (e.g. build flags for
+	additional languages) can be placed in '<file>.d/*.conf'.
 
 *-c* <dir>::
 	Set pacman cache, if no directory is specified the passed pacman.conf's cachedir is used with a fallback to '/etc/pacman.conf'

doc/man/makerepropkg.1.asciidoc

@@ -49,7 +49,8 @@ Options
 	Set the pacman cache directory.
 
 *-M* <file>::
-	Location of a makepkg config file.
+	Location of a makepkg config file. Specific additions (e.g. build flags for
+	additional languages) can be placed in '<file>.d/*.conf'.
 
 *-l* <chroot>::
 	The directory name to use as the chroot namespace

doc/man/pkgctl-issue-close.1.asciidoc

@@ -0,0 +1,47 @@
+pkgctl-issue-close(1)
+=====================
+
+Name
+----
+pkgctl-issue-close - Close an issue
+
+Synopsis
+--------
+pkgctl issue close [OPTIONS] [IID]
+
+Description
+-----------
+
+This command is used to close an issue in Arch Linux packaging projects. It
+finalizes the issue by marking it as resolved and optionally providing a reason
+for its closure.
+
+To edit an issue, users must specify the issue ID (IID). By default, the
+command operates within the current directory, but users have the option to
+specify a different package base.
+
+Users can provide a message directly through the command line to explain the
+reason for closing the issue. For more detailed or precise reasons, users can
+opt to edit the closure message using a text editor before submitting it.
+Additionally, a specific resolution label can be set to categorize the closure
+reason, with the default label being "completed."
+
+Options
+-------
+
+*-p, --package* 'PKGBASE'::
+	Interact with `PKGBASE` instead of the current directory
+
+*-m, --message* 'MSG'::
+	Use the provided message as the reason for closing
+
+*-e, --edit*::
+	Edit the reason for closing using an editor
+
+*-r, --resolution* 'REASON'::
+	Set a specific resolution label (default: completed)
+
+*-h, --help*::
+	Show a help text
+
+include::include/footer.asciidoc[]

doc/man/pkgctl-issue-comment.1.asciidoc

@@ -0,0 +1,43 @@
+pkgctl-issue-comment(1)
+=======================
+
+Name
+----
+pkgctl-issue-comment - Comment on an issue
+
+Synopsis
+--------
+pkgctl issue comment [OPTIONS] [IID]
+
+Description
+-----------
+
+This command allows users to add comments to an issue in Arch Linux packaging
+projects. This command is useful for providing feedback, updates, or any
+additional information related to an issue directly within the project's issue
+tracking system.
+
+By default, the command interacts with the current directory, but users can
+specify a different package base if needed.
+
+Users can provide a comment message directly through the command line, ensuring
+quick and efficient communication. Additionally, for more detailed or formatted
+comments, users have the option to edit their comment using a text editor
+before submitting it.
+
+Options
+-------
+
+*-p, --package PKGBASE*::
+	Interact with `PKGBASE` instead of the current directory
+
+*-m, --message MSG*::
+	Use the provided message as the comment
+
+*-e, --edit*::
+	Edit the comment using an editor
+
+*-h, --help*::
+	Show a help text
+
+include::include/footer.asciidoc[]

doc/man/pkgctl-issue-create.1.asciidoc

@@ -0,0 +1,77 @@
+pkgctl-issue-create(1)
+======================
+
+Name
+----
+pkgctl-issue-create - Create a new issue
+
+Synopsis
+--------
+pkgctl issue create [OPTIONS]
+
+Description
+-----------
+
+The create command is used to create a new issue for an Arch Linux package.
+This command is suitable for reporting bugs, regressions, feature requests, or
+any other issues related to a package. It provides a flexible way to document
+and track new issues within the project's issue tracking system.
+
+By default, the command operates within the current directory, but users can
+specify a different package base if needed.
+
+Users can provide a title for the issue directly through the command line. The
+issue description can be supplied from a file or edited using a text editor.
+Alternatively, users can opt to continue the issue creation process using the
+web interface for a more interactive experience.
+
+The command allows setting various labels and attributes for the issue, such as
+confidentiality, priority, scope, severity, and status. These options help
+categorize and prioritize the issue appropriately within the tracking system.
+
+In case of a failed run, the command can automatically recover to ensure that
+the issue creation process is completed without losing any data.
+
+This command is essential for maintainers, contributors, and users who need to
+report new issues related to Arch Linux packages.
+
+Options
+-------
+
+*-p, --package* 'PKGBASE'::
+	Interact with `PKGBASE` instead of the current directory
+
+*-t, --title* 'TITLE'::
+	Use the provided title for the issue
+
+*-F, --file* 'FILE'::
+	Take issue description from <file>
+
+*-e, --edit*::
+	Edit the issue description using an editor
+
+*-w, --web*::
+	Continue issue creation with the web interface
+
+*--recover*::
+	Automatically recover from a failed run
+
+*--confidentiality* 'TYPE'::
+	Set the issue confidentiality
+
+*--priority* 'PRIORITY'::
+	Set the priority label
+
+*--scope* 'SCOPE'::
+	Set the scope label
+
+*--severity* 'SEVERITY'::
+	Set the severity label
+
+*--status* 'STATUS'::
+	Set the status label
+
+*-h, --help*::
+	Show a help text
+
+include::include/footer.asciidoc[]

doc/man/pkgctl-issue-edit.1.asciidoc

@@ -0,0 +1,75 @@
+pkgctl-issue-edit(1)
+====================
+
+Name
+----
+pkgctl-issue-edit - Edit and modify an issue
+
+Synopsis
+--------
+pkgctl issue edit [OPTIONS] [IID]
+
+Description
+-----------
+
+The pkgctl issue edit command is used to modify an existing issue in Arch Linux
+packaging projects. This command allows users to update the issue's title,
+description, and various attributes, ensuring that the issue information
+remains accurate and up-to-date. It also provides a streamlined facility
+for bug wranglers to categorize and prioritize issues efficiently.
+
+To edit an issue, users must specify the issue ID (IID). By default, the
+command operates within the current directory, but users can specify a
+different package base if needed.
+
+The command allows for direct updates to the issue title and description. For
+more extensive changes, users can edit these details using a text editor. The
+command provides various options to set or update labels and attributes such as
+confidentiality, priority, resolution, scope, severity, and status. These
+options help maintain clear and organized issue management.
+
+In case of a failed run, the command can automatically recover to ensure that
+the editing process is completed without losing any data.
+
+This command is particularly useful for maintainers and contributors who need
+to update the details of an issue to reflect new information or changes in
+status. It ensures that all issue details are accurately maintained,
+facilitating efficient tracking and resolution.
+
+Options
+-------
+
+*-p, --package* 'PKGBASE'::
+	Interact with `PKGBASE` instead of the current directory
+
+*-t, --title* 'TITLE'::
+	Use the provided title for the issue
+
+*-e, --edit*::
+	Edit the issue title and description using an editor
+
+*--recover*::
+	Automatically recover from a failed run
+
+*--confidentiality* 'TYPE'::
+	Set the issue confidentiality
+
+*--priority* 'PRIORITY'::
+	Set the priority label
+
+*--resolution* 'REASON'::
+	Set the resolution label
+
+*--scope* 'SCOPE'::
+	Set the scope label
+
+*--severity* 'SEVERITY'::
+	Set the severity label
+
+*--status* 'STATUS'::
+	Set the status label
+
+*-h, --help*::
+	Show a help text
+
+include::include/footer.asciidoc[]

doc/man/pkgctl-issue-list.1.asciidoc

@@ -0,0 +1,100 @@
+pkgctl-issue-list(1)
+====================
+
+Name
+----
+pkgctl-issue-list - List project or group issues
+
+Synopsis
+--------
+pkgctl issue list [OPTIONS] [PKGBASE]
+
+Description
+-----------
+
+The pkgctl issue list command is used to list issues associated with a specific
+packaging project or the entire packaging subgroup in Arch Linux. This command
+facilitates efficient issue management by allowing users to list and filter
+issues based on various criteria.
+
+Results can also be displayed directly in a web browser for easier navigation
+and review.
+
+The command offers filtering options to refine the results. Users can include
+closed issues, filter exclusively for unconfirmed issues, or focus on issues
+with specific labels such as priority, confidentiality, resolution, scope,
+severity, and status.
+
+Additionally, users can search within issue titles or descriptions and filter
+issues by the assignee or author. There are also convenient shortcuts to filter
+issues assigned to or created by the current user.
+
+This command is particularly useful for package maintainers and contributors in
+the Arch Linux community who need to track and manage issues efficiently. It
+provides a comprehensive view of the project's or group's issue landscape,
+enabling maintainers to address and prioritize issues effectively.
+
+Options
+-------
+
+*-g, --group*::
+	Get issues from the whole packaging subgroup
+
+*-w, --web*::
+	View results in a browser
+
+*-h, --help*::
+	Show a help text
+
+Filter Options
+--------------
+
+*-A, --all*::
+	Get all issues including closed
+
+*-c, --closed*::
+	Get only closed issues
+
+*-U, --unconfirmed*::
+	Shorthand to filter by unconfirmed status label
+
+*--search* 'SEARCH'::
+	Search <string> in the fields defined by --in
+
+*--in* 'LOCATION'::
+	Search in title or description (default: all)
+
+*-l, --label* 'NAME'::
+	Filter issue by label <name>
+
+*--confidentiality* 'TYPE'::
+	Filter by confidentiality
+
+*--priority* 'PRIORITY'::
+	Shorthand to filter by priority label
+
+*--resolution* 'REASON'::
+	Shorthand to filter by resolution label
+
+*--scope* 'SCOPE'::
+	Shorthand to filter by scope label
+
+*--severity* 'SEVERITY'::
+	Shorthand to filter by severity label
+
+*--status* 'STATUS'::
+	Shorthand to filter by status label
+
+*--assignee* 'USERNAME'::
+	Filter issues assigned to the given username
+
+*--assigned-to-me*::
+	Shorthand to filter issues assigned to you
+
+*--author* 'USERNAME'::
+	Filter issues authored by the given username
+
+*--created-by-me*::
+	Shorthand to filter issues created by you
+
+include::include/footer.asciidoc[]

doc/man/pkgctl-issue-move.1.asciidoc

@@ -0,0 +1,43 @@
+pkgctl-issue-move(1)
+====================
+
+Name
+----
+pkgctl-issue-move - Move an issue to another project
+
+Synopsis
+--------
+pkgctl issue move [OPTIONS] [IID] [DESTINATION_PACKAGE]
+
+Description
+-----------
+
+The move command allows users to transfer an issue from one project to another
+within the Arch Linux packaging group. This is useful when an issue is
+identified to be more relevant or better handled in a different project.
+
+By default, the command operates within the current directory, but users can
+specify a different package base from which to move the issue.
+
+Users must specify the issue ID (IID) and the destination package to which the
+issue should be moved. A comment message explaining the reason for the move can
+be provided directly through the command line. For more detailed explanations
+or additional context, users have the option to edit the move comment using a
+text editor before submitting it.
+
+Options
+-------
+
+*-p, --package* 'PKGBASE'::
+	Move from `PKGBASE` instead of the current directory
+
+*-m, --message* 'MSG'::
+	Use the provided message as the comment
+
+*-e, --edit*::
+	Edit the comment using an editor
+
+*-h, --help*::
+	Show a help text
+
+include::include/footer.asciidoc[]

doc/man/pkgctl-issue-reopen.1.asciidoc

@@ -0,0 +1,43 @@
+pkgctl-issue-reopen(1)
+======================
+
+Name
+----
+pkgctl-issue-reopen - Reopen a closed issue
+
+Synopsis
+--------
+pkgctl issue reopen [OPTIONS] [IID]
+
+Description
+-----------
+
+The reopen command is used to reopen a previously closed issue in Arch Linux
+packaging projects. This command is useful when an issue needs to be revisited
+or additional work is required after it was initially closed.
+
+To edit an issue, users must specify the issue ID (IID). By default, the
+command operates within the current directory, but users can specify a
+different package base if needed.
+
+Users can provide a message directly through the command line to explain the
+reason for reopening the issue. For more detailed explanations or to provide
+additional context, users have the option to edit the reopening comment using a
+text editor before submitting it.
+
+Options
+-------
+
+*-p, --package* 'PKGBASE'::
+	Interact with `PKGBASE` instead of the current directory
+
+*-m, --message* 'MSG'::
+	Use the provided message as the comment
+
+*-e, --edit*::
+	Edit the comment using an editor
+
+*-h, --help*::
+	Show a help text
+
+include::include/footer.asciidoc[]

doc/man/pkgctl-issue-view.1.asciidoc

@@ -0,0 +1,43 @@
+pkgctl-issue-view(1)
+====================
+
+Name
+----
+pkgctl-issue-view - Display information about an issue
+
+Synopsis
+--------
+pkgctl issue view [OPTIONS]
+
+Description
+-----------
+
+This command is designed to display detailed information about a specific issue
+in Arch Linux packaging projects. It gathers and pretty prints all relevant
+data about the issue, providing a comprehensive view that includes the issue's
+description, status as well as labels and creation date.
+
+By default, the command operates within the current directory, but users have
+the option to specify a different package base. Additionally, users can choose
+to view the issue in a web browser for a more interactive experience.
+
+For those requiring deeper insights, the command can also display all comments
+and activities related to the issue, providing a full historical context and
+ongoing discussions.
+
+Options
+-------
+
+*-p, --package* 'PKGBASE'::
+	Interact with `PKGBASE` instead of the current directory
+
+*-c, --comments*::
+	Show issue comments and activities
+
+*-w, --web*::
+	Open issue in a browser
+
+*-h, --help*::
+	Show a help text
+
+include::include/footer.asciidoc[]

doc/man/pkgctl-issue.1.asciidoc

@@ -0,0 +1,62 @@
+pkgctl-issue(1)
+===============
+
+Name
+----
+pkgctl-issue - Work with GitLab packaging issues
+
+Synopsis
+--------
+pkgctl issue [SUBCOMMAND] [OPTIONS]
+
+Description
+-----------
+
+Work with GitLab packaging issues.
+
+Options
+-------
+
+*-h, --help*::
+	Show a help text
+
+Subcommands
+-----------
+
+pkgctl issue close::
+	Close an issue
+
+pkgctl issue comment::
+	Comment on an issue
+
+pkgctl issue create::
+	Create a new issue
+
+pkgctl issue edit::
+	Edit and modify an issue
+
+pkgctl issue list::
+	List project or group issues
+
+pkgctl issue move::
+	Move an issue to another project
+
+pkgctl issue reopen::
+	Reopen a closed issue
+
+pkgctl issue view::
+	Display information about an issue
+
+See Also
+--------
+
+pkgctl-issue-close(1)
+pkgctl-issue-comment(1)
+pkgctl-issue-create(1)
+pkgctl-issue-edit(1)
+pkgctl-issue-list(1)
+pkgctl-issue-move(1)
+pkgctl-issue-reopen(1)
+pkgctl-issue-view(1)
+
+include::include/footer.asciidoc[]

doc/man/pkgctl-license-check.1.asciidoc

@@ -0,0 +1,54 @@
+pkgctl-license-check(1)
+=======================
+
+Name
+----
+pkgctl-license-check - Checks package licensing compliance using REUSE
+
+Synopsis
+--------
+pkgctl license check [OPTIONS] [PKGBASE...]
+
+Description
+-----------
+
+Checks package licensing compliance using REUSE and also verifies whether
+a LICENSE file with the expected Arch Linux-specific 0BSD license text exists.
+
+Configuration
+-------------
+
+Uses reuse(1) and a `REUSE.toml` file located alongside the PKGBUILD(5). Refer
+to the configuration section in pkgctl-license(1).
+
+If no `PKGBASE` is specified, the command defaults to using the current working
+directory.
+
+Options
+-------
+
+*-h, --help*::
+	Show a help text
+
+Exit Codes
+----------
+
+On exit, return one of the following codes:
+
+*0*::
+	Normal exit condition, all checked packages are compliant
+
+*1*::
+	Unknown cause of failure
+
+*2*::
+	Normal exit condition, but some packages are not compliant
+
+See Also
+--------
+
+pkgctl-license(1)
+reuse(1)
+PKGBUILD(5)
+
+include::include/footer.asciidoc[]

doc/man/pkgctl-license-setup.1.asciidoc

@@ -0,0 +1,55 @@
+pkgctl-license-setup(1)
+=======================
+
+Name
+----
+pkgctl-license-setup - Automatically detect and setup a basic REUSE
+configuration
+
+Synopsis
+--------
+pkgctl license setup [OPTIONS] [PKGBASE...]
+
+Description
+-----------
+
+This subcommand automates the creation of the Arch Linux 0BSD package license
+file as well as a basic reuse(1) configuration by applying simple heuristics.
+It comes in especially handy when initially setting up licensing for a package
+without the need to manually write a `REUSE.toml` file.
+
+If any `.patch` files are detected and the PKGBUILD(5) has only a single entry
+in the `license=()` array, this subcommand assumes the patches are licensed
+under that license and generates annotations for them.
+
+In case there are no patches, no additional annotations are generated.
+
+Manual annotations are necessary in case the subcommand can't generate a
+configuration that accounts for all files. In this case, `reuse lint` will fail
+with a descriptive error of which files are missing an annotation.
+
+If no `PKGBASE` is specified, the command defaults to using the current working
+directory.
+
+Options
+-------
+
+*-f, --force*::
+	Overwrite existing reuse(1) configuration
+
+*--no-check*::
+	Do not run pkgctl-license-check(1) after setup
+
+*-h, --help*::
+	Show a help text
+
+
+See Also
+--------
+
+pkgctl-license(1)
+pkgctl-license-check(1)
+reuse(1)
+PKGBUILD(5)
+
+include::include/footer.asciidoc[]

doc/man/pkgctl-license.1.asciidoc

@@ -0,0 +1,54 @@
+pkgctl-license(1)
+=================
+
+Name
+----
+pkgctl-license - Check and manage package license compliance
+
+Synopsis
+--------
+pkgctl license [OPTIONS] [SUBCOMMAND]
+
+Description
+-----------
+
+Commands related to package licenses, including checks for compliance.
+
+Uses reuse(1) and a `REUSE.toml` file located alongside the PKGBUILD(5).
+
+Configuration
+-------------
+
+The `REUSE.toml` file must contain annotations for all regular files expected
+to be present in an Arch Linux package repository.
+
+Use pkgctl-license-setup(1) to automatically detect and setup a basic REUSE
+config file based on the files in the package repository.
+
+For detailed information on the various configuration options available for the
+`REUSE.toml` file, refer to the REUSE Specification (https://reuse.software/spec).
+
+Options
+-------
+
+*-h, --help*::
+	Show a help text
+
+Subcommands
+-----------
+
+pkgctl license check::
+	Checks package licensing compliance using REUSE
+
+pkgctl license setup::
+	Automatically detect and setup a basic REUSE config
+
+See Also
+--------
+
+pkgctl-license-check(1)
+pkgctl-license-setup(1)
+reuse(1)
+PKGBUILD(5)
+
+include::include/footer.asciidoc[]

doc/man/pkgctl-version-check.1.asciidoc

@@ -34,12 +34,25 @@ PKGBUILD. Refer to the configuration section in pkgctl-version(1).
 Options
 -------
 
-*-v, --verbose*::
-	Display results including up-to-date versions
-
 *-h, --help*::
 	Show a help text
 
+Filter Options
+--------------
+
+*-v, --verbose*::
+	Display all results including up-to-date versions
+
+Output Options
+--------------
+
+*--json*::
+	Enable printing in JSON; Shorthand for `'--format json'`
+
+*-F, --format* 'FORMAT'::
+	Controls the output format of the results; `FORMAT` is `'pretty'`,
+	or `'json'` (default `pretty`)
+
 Exit Codes
 ----------
 

doc/man/pkgctl-version-setup.1.asciidoc

@@ -42,10 +42,15 @@ Options
 *--url* 'URL'::
 	Derive check target from the given URL instead of the source array entries
 
-
 *--no-check*::
 	Do not run pkgctl-version-check(1) after setup
 
+*--no-upstream*::
+	Setup a blank config for packages without upstream sources, like meta
+	packages. This must only be used for cases without an upstream, please
+	reach out to the developer team for guidance regarding upstream sources
+	that are hard to configure.
+
 *-h, --help*::
 	Show a help text
 

doc/man/pkgctl.1.asciidoc

@@ -12,9 +12,9 @@ pkgctl [SUBCOMMAND] [OPTIONS]
 Description
 -----------
 
-Command-line utility serving as a unified interface for multiple development tools. 
-This tool aims to simplify and optimize interactions with devtools by offering 
-various subcommands for executing tasks related to package management, repository management, 
+Command-line utility serving as a unified interface for multiple development tools.
+This tool aims to simplify and optimize interactions with devtools by offering
+various subcommands for executing tasks related to package management, repository management,
 version control, among others.
 
 Utilizing pkgctl enables users to efficiently administer their development workflows.
@@ -46,6 +46,9 @@ pkgctl db::
 pkgctl diff::
 	Compare package files using different modes
 
+pkgctl issue::
+	Work with GitLab packaging issues
+
 pkgctl release::
 	Release step to commit, tag and upload build artifacts
 
@@ -66,6 +69,7 @@ pkgctl-auth(1)
 pkgctl-build(1)
 pkgctl-db(1)
 pkgctl-diff(1)
+pkgctl-issue(1)
 pkgctl-release(1)
 pkgctl-repo(1)
 pkgctl-search(1)

src/arch-nspawn.in

@@ -65,6 +65,7 @@ nspawn_args=(
 	--machine="arch-nspawn-$$"
 	--as-pid2
 	--console=autopipe
+	--timezone=off
 )
 
 if (( ${#cache_dirs[@]} == 0 )); then
@@ -111,7 +112,13 @@ copy_hostconf () {
 	[[ -n $host_cachemirrors ]] && printf 'CacheServer = %s\n' "${host_cachemirrors[@]}" >>"$working_dir/etc/pacman.d/mirrorlist"
 
 	[[ -n $pac_conf ]] && cp "$pac_conf" "$working_dir/etc/pacman.conf"
-	[[ -n $makepkg_conf ]] && cp "$makepkg_conf" "$working_dir/etc/makepkg.conf"
+	if [[ -n $makepkg_conf ]]; then
+		cp "$makepkg_conf" "$working_dir/etc/makepkg.conf"
+		if [[ -d "${makepkg_conf}.d" ]] && is_globfile "${makepkg_conf}.d"/*.conf; then
+			mkdir --parents "$working_dir/etc/makepkg.conf.d/"
+			cp "${makepkg_conf}.d/"*.conf "$working_dir/etc/makepkg.conf.d/"
+		fi
+	fi
 
 	local file
 	for file in "${files[@]}"; do

src/archbuild.in

@@ -79,6 +79,13 @@ check_root SOURCE_DATE_EPOCH,SRCDEST,SRCPKGDEST,PKGDEST,LOGDEST,MAKEFLAGS,PACKAG
 # Pass all arguments after -- right to makepkg
 makechrootpkg_args+=("${@:$OPTIND}")
 
+# Automatically recreate the root chroot if a version mismatch is detected
+CURRENT_CHROOT_VERSION=$(cat "${chroots}/${repo}-${arch}/root/.arch-chroot")
+if [[ -f "${chroots}/${repo}-${arch}/root/.arch-chroot" ]] && [[ "$CURRENT_CHROOT_VERSION" != "$CHROOT_VERSION" ]]; then
+	warning "Recreating chroot '%s' (%s) as it is not at version %s" "${chroots}/${repo}-${arch}/root" "$CURRENT_CHROOT_VERSION" "$CHROOT_VERSION"
+	clean_first=true
+fi
+
 if ${clean_first} || [[ ! -d "${chroots}/${repo}-${arch}" ]]; then
 	msg "Creating chroot for [%s] (%s)..." "${repo}" "${arch}"
 

src/checkpkg.in

@@ -140,7 +140,7 @@ for _pkgname in "${pkgname[@]}"; do
 	bsdtar tf "$TEMPDIR/$oldpkg" | sort > "$TEMPDIR/filelist-$_pkgname-old"
 	bsdtar tf "$pkgfile" | sort > "$TEMPDIR/filelist-$_pkgname"
 
-	diff --side-by-side --suppress-common-lines --width="$COLUMNS" --color=auto "$TEMPDIR/filelist-$_pkgname-old" "$TEMPDIR/filelist-$_pkgname"
+	diff --side-by-side --suppress-common-lines --width="${COLUMNS:-130}" --color=auto "$TEMPDIR/filelist-$_pkgname-old" "$TEMPDIR/filelist-$_pkgname"
 
 	find-libprovides "$TEMPDIR/$oldpkg" 2>/dev/null | sort > "$TEMPDIR/libraries-$_pkgname-old"
 	find-libprovides "$pkgfile" 2>/dev/null | sort > "$TEMPDIR/libraries-$_pkgname"

src/commitpkg.in

@@ -120,8 +120,19 @@ if (( ${#validpgpkeys[@]} != 0 )); then
 	git add --force -- keys/pgp/*
 fi
 
+needsversioning=()
+
+if [[ ! -e REUSE.toml || ! -e LICENSE || ! -d LICENSES ]]; then
+	error "package doesn't have proper licensing information, set it up using:"
+	msg2 'pkgctl license setup'
+	exit 1
+else
+	pkgctl license check
+	needsversioning+=(REUSE.toml LICENSE LICENSES/*)
+fi
+
 # find files which should be under source control
-needsversioning=(PKGBUILD)
+needsversioning+=(PKGBUILD)
 for s in "${source[@]}"; do
 	[[ $s != *://* ]] && needsversioning+=("$s")
 done
@@ -143,7 +154,7 @@ if (( ${#needsversioning[*]} )); then
 		if [[ ! -f "${file}" ]]; then
 			continue
 		fi
-		if ! git ls-files --error-unmatch "$file"; then
+		if ! git ls-files --error-unmatch "$file" >/dev/null; then
 			die "%s is not under version control" "$file"
 		fi
 	done

src/lib/api/archweb.sh

@@ -14,6 +14,8 @@ set -o pipefail
 
 
 archweb_query_all_packages() {
+	local -a pkgbases
+
 	[[ -z ${WORKDIR:-} ]] && setup_workdir
 
 	stat_busy "Query all released packages"
@@ -36,6 +38,7 @@ archweb_query_all_packages() {
 
 archweb_query_maintainer_packages() {
 	local maintainer=$1
+	local -a pkgbases
 
 	[[ -z ${WORKDIR:-} ]] && setup_workdir
 

src/lib/api/gitlab.sh

@@ -8,8 +8,12 @@ DEVTOOLS_INCLUDE_API_GITLAB_SH=1
 _DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
 # shellcheck source=src/lib/common.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/cache.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/cache.sh
 # shellcheck source=src/lib/config.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/config.sh
+# shellcheck source=src/lib/valid-issue.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-issue.sh
 
 set -e
 
@@ -115,11 +119,13 @@ gitlab_api_call_paged() {
 
 	local next_page=1
 	local total_pages=1
+	local known_total_pages=1
+	local percentage=100
 
 	while [[ -n "${next_page}" ]]; do
 		percentage=$(( 100 * next_page / total_pages ))
 		printf "📡 Querying GitLab: %s/%s [%s] %%spinner%%" \
-			"${BOLD}${next_page}" "${total_pages}" "${percentage}%${ALL_OFF}"  \
+			"${BOLD}${next_page}" "${known_total_pages}" "${percentage}%${ALL_OFF}"  \
 			> "${tmp_file}"
 		mv "${tmp_file}" "${status_file}"
 
@@ -144,6 +150,15 @@ gitlab_api_call_paged() {
 
 		next_page=$(grep "x-next-page" "${header}" | tr -d '\r' | awk '{ print $2 }')
 		total_pages=$(grep "x-total-pages" "${header}" | tr -d '\r' | awk '{ print $2 }')
+		# The api is not guaranteed to return x-total-pages for larger query results
+		# https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/23931
+		# https://gitlab.com/gitlab-org/gitlab/-/issues/436373
+		if (( total_pages == 0 )); then
+			total_pages=${next_page}
+			known_total_pages="?"
+		else
+			known_total_pages=${total_pages}
+		fi
 	done
 
 	jq --slurp add "${api_workdir}"/result.* > "${outfile}"
@@ -234,6 +249,101 @@ gitlab_api_get_project_name_mapping() {
 	return 0
 }
 
+gitlab_lookup_project_names() {
+	local status_file=$1; shift
+	local project_ids=("$@")
+	local graphql_lookup_batch=200
+
+	local project_name_cache_file tmp_file from length percentage
+	local project_slice query projects mapping_output
+
+	# collect project ids whose name needs to be looked up
+	project_name_cache_file=$(get_cache_file gitlab/project_id_to_name)
+	lock 11 "${project_name_cache_file}" "Locking project name cache"
+
+	# early exit if there is nothing new to look up
+	if (( ! ${#project_ids[@]} )); then
+		cat "${project_name_cache_file}"
+		# close project name cache lock
+		lock_close 11
+		return
+	fi
+
+	# reduce project_ids to uncached entries
+	mapfile -t project_ids < <(
+		printf "%s\n" "${project_ids[@]}" | \
+			grep --invert-match --file <(awk '{ print $1 }' < "${project_name_cache_file}" ))
+
+	# look up project names
+	tmp_file=$(mktemp --tmpdir="${WORKDIR}" pkgctl-gitlab-api-spinner.tmp.XXXXXXXXXX)
+	local entries="${#project_ids[@]}"
+	local until=0
+	while (( until < entries )); do
+		from=${until}
+		until=$(( until + graphql_lookup_batch ))
+		if (( until > entries )); then
+			until=${entries}
+		fi
+		length=$(( until - from ))
+
+		percentage=$(( 100 * until / entries ))
+		printf "📡 Querying GitLab project names: %s/%s [%s] %%spinner%%" \
+			"${BOLD}${until}" "${entries}" "${percentage}%${ALL_OFF}"  \
+			> "${tmp_file}"
+		mv "${tmp_file}" "${status_file}"
+
+		project_slice=("${project_ids[@]:${from}:${length}}")
+		printf -v projects '"gid://gitlab/Project/%s",' "${project_slice[@]}"
+		query='{
+			projects(after: "" ids: ['"${projects}"']) {
+				pageInfo {
+					startCursor
+					endCursor
+					hasNextPage
+				}
+				nodes {
+					id
+					name
+				}
+			}
+		}'
+		mapping_output=$(gitlab_api_get_project_name_mapping "${query}")
+
+		# update cache
+		while read -r project_id project_name; do
+			printf "%s %s\n" "${project_id}" "${project_name}" >> "${project_name_cache_file}"
+		done < <(jq --raw-output \
+			'.[] | "\(.id | rindex("/") as $lastSlash | .[$lastSlash+1:]) \(.name)"' \
+			<<< "${mapping_output}")
+	done
+
+	cat "${project_name_cache_file}"
+
+	# close project name cache lock
+	lock_close 11
+}
+
+longest_package_name_from_ids() {
+	local project_ids=("$@")
+	local longest=0
+
+	# collect project ids whose name needs to be looked up
+	project_name_cache_file=$(get_cache_file gitlab/project_id_to_name)
+	lock 11 "${project_name_cache_file}" "Locking project name cache"
+
+	# read project_id to name mapping from cache
+	while read -r project_id project_name; do
+		if (( ${#project_name} > longest )) && in_array "${project_id}" "${project_ids[@]}"; then
+			longest="${#project_name}"
+		fi
+	done < "${project_name_cache_file}"
+
+	# close project name cache lock
+	lock_close 11
+
+	printf "%s" "${longest}"
+}
+
 # Convert arbitrary project names to GitLab valid path names.
 #
 # GitLab has several limitations on project and group names and also maintains
@@ -302,3 +412,492 @@ gitlab_api_search() {
 
 	return 0
 }
+
+# https://docs.gitlab.com/ee/api/projects.html#get-single-project
+gitlab_project() {
+	local project=$1
+	local outfile project_path
+
+	[[ -z ${WORKDIR:-} ]] && setup_workdir
+	outfile=$(mktemp --tmpdir="${WORKDIR}" pkgctl-gitlab-api.XXXXXXXXXX)
+
+	project_path=$(gitlab_project_name_to_path "${project}")
+
+	if ! gitlab_api_call "${outfile}" GET "projects/archlinux%2fpackaging%2fpackages%2f${project_path}/"; then
+		return 1
+	fi
+
+	cat "${outfile}"
+
+	return 0
+}
+
+# TODO: parallelize
+# https://docs.gitlab.com/ee/api/issues.html#list-project-issues
+gitlab_projects_issues_list() {
+	local project=$1
+	local status_file=$2
+	local params=${3:-}
+	local data=${4:-}
+	local outfile
+
+	[[ -z ${WORKDIR:-} ]] && setup_workdir
+	outfile=$(mktemp --tmpdir="${WORKDIR}" pkgctl-gitlab-api.XXXXXXXXXX)
+
+	if ! gitlab_api_call_paged "${outfile}" "${status_file}" GET "/projects/archlinux%2fpackaging%2fpackages%2f${project}/issues?${params}" "${data}"; then
+		return 1
+	fi
+
+	cat "${outfile}"
+
+	return 0
+}
+
+# TODO: parallelize
+# https://docs.gitlab.com/ee/api/issues.html#list-project-issues
+gitlab_group_issue_list() {
+	local group=$1
+	local status_file=$2
+	local params=${3:-}
+	local data=${4:-}
+	local outfile
+
+	[[ -z ${WORKDIR:-} ]] && setup_workdir
+	outfile=$(mktemp --tmpdir="${WORKDIR}" pkgctl-gitlab-api.XXXXXXXXXX)
+
+	group=${group//\//%2f}
+	params=${params//\[/%5B}
+	params=${params//\]/%5D}
+
+	if ! gitlab_api_call_paged "${outfile}" "${status_file}" GET "/groups/${group}/issues?${params}" "${data}"; then
+		return 1
+	fi
+
+	cat "${outfile}"
+}
+
+# https://docs.gitlab.com/ee/api/issues.html#single-project-issue
+gitlab_project_issue() {
+	local pkgbase=$1
+	local iid=$2
+	local outfile data path project_path
+
+	[[ -z ${WORKDIR:-} ]] && setup_workdir
+	outfile=$(mktemp --tmpdir="${WORKDIR}" pkgctl-gitlab-api.XXXXXXXXXX)
+
+	project_path=$(gitlab_project_name_to_path "${pkgbase}")
+
+	if ! gitlab_api_call "${outfile}" GET "projects/archlinux%2fpackaging%2fpackages%2f${project_path}/issues/${iid}"; then
+		return 1
+	fi
+
+	if ! path=$(jq --raw-output --exit-status '.title' < "${outfile}"); then
+		msg_error "  failed to query path: $(cat "${outfile}")"
+		return 1
+	fi
+
+	cat "${outfile}"
+	return 0
+}
+
+gitlab_project_issue_create() {
+	local pkgbase=$1
+	local title=$2
+	local description=$3
+	local confidential=$4
+	shift 4
+	local labels=("${@}")
+	local outfile data iid project_path
+
+	[[ -z ${WORKDIR:-} ]] && setup_workdir
+	outfile=$(mktemp --tmpdir="${WORKDIR}" pkgctl-gitlab-api.XXXXXXXXXX)
+
+	project_path=$(gitlab_project_name_to_path "${pkgbase}")
+
+	data=$(jq --null-input \
+		--arg title "${title}" \
+		--arg description "${description}" \
+		--arg confidential "${confidential}" \
+		--arg labels "$(join_by , "${labels[@]}")" \
+		'$ARGS.named')
+	if ! gitlab_api_call "${outfile}" POST "/projects/archlinux%2fpackaging%2fpackages%2f${project_path}/issues" "${data}"; then
+		return 1
+	fi
+
+	if ! iid=$(jq --raw-output --exit-status '.iid' < "${outfile}"); then
+		msg_error "  failed to query note: $(cat "${outfile}")"
+		return 1
+	fi
+
+	cat "${outfile}"
+	return 0
+}
+
+# TODO: parallelize
+# https://docs.gitlab.com/ee/api/notes.html#list-project-issue-notes
+gitlab_project_issue_notes() {
+	local project=$1
+	local iid=$2
+	local status_file=$3
+	local params=${4:-}
+	local outfile
+
+	[[ -z ${WORKDIR:-} ]] && setup_workdir
+	outfile=$(mktemp --tmpdir="${WORKDIR}" pkgctl-gitlab-api.XXXXXXXXXX)
+
+	if ! gitlab_api_call_paged "${outfile}" "${status_file}" GET "/projects/archlinux%2fpackaging%2fpackages%2f${project}/issues/${iid}/notes?${params}"; then
+		return 1
+	fi
+
+	cat "${outfile}"
+	return 0
+}
+
+# https://docs.gitlab.com/ee/api/issues.html#edit-an-issue
+gitlab_project_issue_edit() {
+	local pkgbase=$1
+	local iid=$2
+	local params=$3
+	local data=${4:-}
+	local outfile data path project_path
+
+	[[ -z ${WORKDIR:-} ]] && setup_workdir
+	outfile=$(mktemp --tmpdir="${WORKDIR}" pkgctl-gitlab-api.XXXXXXXXXX)
+
+	project_path=$(gitlab_project_name_to_path "${pkgbase}")
+
+	if ! gitlab_api_call "${outfile}" PUT "/projects/archlinux%2fpackaging%2fpackages%2f${project_path}/issues/${iid}?${params}" "${data}"; then
+		return 1
+	fi
+
+	if ! path=$(jq --raw-output --exit-status '.title' < "${outfile}"); then
+		msg_error "  failed to query path: $(cat "${outfile}")"
+		return 1
+	fi
+
+	cat "${outfile}"
+	return 0
+}
+
+gitlab_create_project_issue_note() {
+	local pkgbase=$1
+	local iid=$2
+	local body=$3
+	local outfile data path project_path
+
+	[[ -z ${WORKDIR:-} ]] && setup_workdir
+	outfile=$(mktemp --tmpdir="${WORKDIR}" pkgctl-gitlab-api.XXXXXXXXXX)
+
+	project_path=$(gitlab_project_name_to_path "${pkgbase}")
+
+	data=$(jq --null-input --arg body "${body}" '$ARGS.named')
+	if ! gitlab_api_call "${outfile}" POST "/projects/archlinux%2fpackaging%2fpackages%2f${project_path}/issues/${iid}/notes" "${data}"; then
+		return 1
+	fi
+
+	if ! path=$(jq --raw-output --exit-status '.body' < "${outfile}"); then
+		msg_error "  failed to query note: $(cat "${outfile}")"
+		return 1
+	fi
+
+	cat "${outfile}"
+	return 0
+}
+
+gitlab_project_issue_move() {
+	local pkgbase=$1
+	local iid=$2
+	local to_project_id=$3
+	local outfile path project_path
+
+	[[ -z ${WORKDIR:-} ]] && setup_workdir
+	outfile=$(mktemp --tmpdir="${WORKDIR}" pkgctl-gitlab-api.XXXXXXXXXX)
+
+	project_path=$(gitlab_project_name_to_path "${pkgbase}")
+
+	if ! gitlab_api_call "${outfile}" POST "/projects/archlinux%2fpackaging%2fpackages%2f${project_path}/issues/${iid}/move?to_project_id=${to_project_id}"; then
+		return 1
+	fi
+
+	if ! path=$(jq --raw-output --exit-status '.title' < "${outfile}"); then
+		msg_error "  failed to move issue: $(cat "${outfile}")"
+		return 1
+	fi
+
+	cat "${outfile}"
+	return 0
+}
+
+gitlab_severity_from_labels() {
+	local labels=("$@")
+	local severity="unknown"
+	local label
+	for label in "${labels[@]}"; do
+		if [[ ${label} == severity::* ]]; then
+			severity="${label#*-}"
+		fi
+	done
+	printf "%s" "${severity}"
+}
+
+severity_as_gitlab_label() {
+	local severity=$1
+	case "${severity}" in
+		lowest)
+			printf "severity::5-%s" "${severity}" ;;
+		low)
+			printf "severity::4-%s" "${severity}" ;;
+		medium)
+			printf "severity::3-%s" "${severity}" ;;
+		high)
+			printf "severity::2-%s" "${severity}" ;;
+		critical)
+			printf "severity::1-%s" "${severity}" ;;
+		*)
+			return 1 ;;
+	esac
+	return 0
+}
+
+gitlab_priority_from_labels() {
+	local labels=("$@")
+	local priority="normal"
+	local label
+	for label in "${labels[@]}"; do
+		if [[ ${label} == priority::* ]]; then
+			priority="${label#*-}"
+		fi
+	done
+	printf "%s" "${priority}"
+}
+
+priority_as_gitlab_label() {
+	local priority=$1
+	case "${priority}" in
+		low)
+			printf "priority::4-%s" "${priority}" ;;
+		normal)
+			printf "priority::3-%s" "${priority}" ;;
+		high)
+			printf "priority::2-%s" "${priority}" ;;
+		urgent)
+			printf "priority::1-%s" "${priority}" ;;
+		*)
+			return 1 ;;
+	esac
+	return 0
+}
+
+gitlab_scope_from_labels() {
+	local labels=("$@")
+	local scope="unknown"
+	local label
+	for label in "${labels[@]}"; do
+		if [[ ${label} == scope::* ]]; then
+			scope="${label#*::}"
+		fi
+	done
+	printf "%s" "${scope}"
+}
+
+scope_as_gitlab_label() {
+	local scope=$1
+	if ! in_array "${scope}" "${DEVTOOLS_VALID_ISSUE_SCOPE[@]}"; then
+		return 1
+	fi
+	printf "scope::%s" "${scope}"
+}
+
+gitlab_scope_short() {
+	local scope=$1
+	case "${scope}" in
+		regression)
+			scope=regress ;;
+		enhancement)
+			scope=enhance ;;
+		documentation)
+			scope=doc ;;
+		reproducibility)
+			scope=repro ;;
+		out-of-date)
+			scope=ood ;;
+	esac
+	printf "%s" "${scope}"
+}
+
+gitlab_scope_color() {
+	local scope=$1
+	local color="${GRAY}"
+
+	case "${scope}" in
+		bug)
+			color="${DARK_RED}" ;;
+		feature)
+			color="${DARK_BLUE}" ;;
+		security)
+			color="${RED}" ;;
+		question)
+			color="${PURPLE}" ;;
+		regression)
+			color="${DARK_RED}" ;;
+		enhancement)
+			color="${DARK_BLUE}" ;;
+		documentation)
+			color="${ALL_OFF}" ;;
+		reproducibility)
+			color="${DARK_GREEN}" ;;
+		out-of-date)
+			color="${DARK_YELLOW}" ;;
+	esac
+
+	printf "%s" "${color}"
+}
+
+status_as_gitlab_label() {
+	local status=$1
+	if ! in_array "${status}" "${DEVTOOLS_VALID_ISSUE_STATUS[@]}"; then
+		return 1
+	fi
+	printf "status::%s" "${status}"
+	return 0
+}
+
+gitlab_issue_state_display() {
+	local state=$1
+	if [[ ${state} == opened ]]; then
+		state=open
+	fi
+	printf "%s" "${state}"
+}
+
+gitlab_issue_status_from_labels() {
+	local labels=("$@")
+	local status=unconfirmed
+	local label
+	for label in "${labels[@]}"; do
+		if [[ ${label} == status::* ]]; then
+			status="${label#*::}"
+		fi
+	done
+	printf "%s" "${status}"
+}
+
+gitlab_issue_status_short() {
+	local status=$1
+	if [[ ${status} == waiting-* ]]; then
+		status=waiting
+	fi
+	printf "%s" "${status}"
+}
+
+gitlab_issue_status_color() {
+	local status=$1
+	local color="${GRAY}"
+
+	case "${status}" in
+		confirmed)
+			color="${GREEN}" ;;
+		in-progress)
+			color="${YELLOW}" ;;
+		in-review)
+			color="${PURPLE}" ;;
+		on-hold|unconfirmed)
+			color="${GRAY}" ;;
+		waiting-input|waiting-upstream)
+			color="${DARK_BLUE}" ;;
+	esac
+
+	printf "%s" "${color}"
+}
+
+resolution_as_gitlab_label() {
+	local resolution=$1
+	if ! in_array "${resolution}" "${DEVTOOLS_VALID_ISSUE_RESOLUTION[@]}"; then
+		return 1
+	fi
+	printf "resolution::%s" "${resolution}"
+}
+
+gitlab_resolution_from_labels() {
+	local labels=("$@")
+	local label
+	for label in "${labels[@]}"; do
+		if [[ ${label} == resolution::* ]]; then
+			printf "%s" "${label#*::}"
+			return 0
+		fi
+	done
+	return 1
+}
+
+gitlab_resolution_color() {
+	local resolution=$1
+	local color=""
+
+	case "${resolution}" in
+		cant-reproduce)
+			color="${DARK_YELLOW}" ;;
+		completed)
+			color="${GREEN}" ;;
+		duplicate)
+			color="${GRAY}" ;;
+		invalid)
+			color="${DARK_YELLOW}" ;;
+		not-a-bug)
+			color="${GRAY}" ;;
+		upstream)
+			color="${PURPLE}" ;;
+		wont-fix)
+			color="${DARK_BLUE}" ;;
+	esac
+
+	printf "%s" "${color}"
+}
+
+gitlab_severity_color() {
+	local severity=$1
+	local color="${PURPLE}"
+
+	case "${severity}" in
+		lowest)
+			color="${DARK_GREEN}" ;;
+		low)
+			color="${GREEN}" ;;
+		medium)
+			color="${YELLOW}" ;;
+		high)
+			color="${RED}" ;;
+		critical)
+			color="${RED}${UNDERLINE}" ;;
+	esac
+
+	printf "%s" "${color}"
+}
+
+gitlab_priority_color() {
+	local priority=$1
+	local color="${PURPLE}"
+
+	case "${priority}" in
+		low)
+			color="${DARK_GREEN}" ;;
+		normal)
+			color="${GREEN}" ;;
+		high)
+			color="${YELLOW}" ;;
+		urgent)
+			color="${RED}" ;;
+	esac
+
+	printf "%s" "${color}"
+}
+
+gitlab_issue_state_color() {
+	local state=$1
+	local state_color="${DARK_GREEN}"
+
+	if [[ ${state} == closed ]]; then
+		state_color="${DARK_RED}"
+	fi
+	printf "%s" "${state_color}"
+}

src/lib/archroot.sh

@@ -4,7 +4,7 @@
 :
 
 # shellcheck disable=2034
-CHROOT_VERSION='v5'
+CHROOT_VERSION='v6'
 
 ##
 #  usage : check_root $keepenv

src/lib/build/build.sh

@@ -42,10 +42,10 @@ pkgctl_build_usage() {
 
 		Build packages inside a clean chroot
 
-		When a new pkgver is set using the appropriate PKGBUILD options the
-		checksums are automatically updated.
+		Build packages in clean chroot environment, offering various options
+		and functionalities to customize the package building process.
 
-		TODO
+		By default, chroot environments are located in /var/lib/archbuild/.
 
 		BUILD OPTIONS
 		    --arch ARCH          Specify architectures to build for (disables auto-detection)

src/lib/common.sh

@@ -18,6 +18,9 @@ export LANG=C.UTF-8
 # Avoid systemd trying to color the terminal on systemd-nspawn
 export SYSTEMD_TINT_BACKGROUND=no
 
+# Avoid diffoscope looking at remote debug info through readelf
+unset DEBUGINFOD_URLS
+
 # Set buildtool properties
 export BUILDTOOL=devtools
 export BUILDTOOLVER=@buildtoolver@
@@ -34,8 +37,18 @@ export PACKAGING_REPO_RELEASE_HOST=repos.archlinux.org
 export PKGBASE_MAINTAINER_URL=https://archlinux.org/packages/pkgbase-maintainer
 export AUR_URL_SSH=aur@aur.archlinux.org
 
+# Create or reuse a shared SSH control socket with ControlMaster=auto. The
+# connection is initialized on the first use and persisted for some time, so
+# multiple invokations of devtools can share it.
+# shellcheck disable=SC2016
+export SSH_OPTS=(
+  -o ControlMaster=auto
+  -o ControlPersist=60s
+  -o ControlPath='${XDG_RUNTIME_DIR}/devtools-%r@%h:%p'
+)
+
 export RSYNC_OPTS=(
-  --rsh=ssh
+  --rsh="ssh ${SSH_OPTS[*]}"
   --checksum
   --copy-links
   --human-readable
@@ -54,15 +67,23 @@ if [[ -t 2 && "$TERM" != dumb ]] || [[ ${DEVTOOLS_COLOR} == always ]]; then
 	if tput setaf 0 &>/dev/null; then
 		PURPLE="$(tput setaf 5)"
 		DARK_GREEN="$(tput setaf 2)"
+		DARK_RED="$(tput setaf 1)"
+		DARK_BLUE="$(tput setaf 4)"
+		DARK_YELLOW="$(tput setaf 3)"
 		UNDERLINE="$(tput smul)"
+		GRAY=$(tput setaf 242)
 	else
 		PURPLE="\e[35m"
 		DARK_GREEN="\e[32m"
+		DARK_RED="\e[31m"
+		DARK_BLUE="\e[34m"
+		DARK_YELLOW="\e[33m"
 		UNDERLINE="\e[4m"
+		GRAY=""
 	fi
 else
 	# shellcheck disable=2034
-	declare -gr ALL_OFF='' BOLD='' BLUE='' GREEN='' RED='' YELLOW='' PURPLE='' DARK_GREEN='' UNDERLINE=''
+	declare -gr ALL_OFF='' BOLD='' BLUE='' GREEN='' RED='' YELLOW='' PURPLE='' DARK_RED='' DARK_GREEN='' DARK_BLUE='' DARK_YELLOW='' UNDERLINE='' GRAY=''
 fi
 
 stat_busy() {
@@ -368,7 +389,55 @@ is_globfile() {
 }
 
 join_by() {
-	local IFS="$1"
+	local IFS="	"
+	local sep=$1
+	local split
 	shift
-	echo "$*"
+	split=$(printf "%s" "$*")
+	echo "${split//${IFS}/"${sep}"}"
+}
+
+trim_string() {
+	local max_length=$1
+	local string=$2
+
+	if (( ${#string} > max_length )); then
+		# Subtract 3 from max_length to accommodate "..."
+		max_length=$((max_length - 3))
+		string="${string:0:max_length}..."
+	fi
+
+	printf "%s" "${string}"
+}
+
+relative_date_unit() {
+	local target_date=$1
+	local now diff value units unit names
+
+	target_date=$(date -d "$1" +%s)
+	now=$(date +%s)
+	diff=$((now - target_date))
+
+	local names=(year month week day hour minute second)
+	declare -A units=(
+		[year]=$((60 * 60 * 24 * 365))
+		[month]=$((60 * 60 * 24 * 30))
+		[week]=$((60 * 60 * 24 * 7))
+		[day]=$((60 * 60 * 24))
+		[hour]=$((60 * 60))
+		[minute]=60
+		[second]=1
+	)
+
+	for unit in "${names[@]}"; do
+		local value=$((diff / ${units[${unit}]}))
+		if (( value > 1 )); then
+			printf "%s %ss" "${value}" "${unit}"
+			return
+		elif (( value == 1 )); then
+			printf "%s %s" "${value}" "${unit}"
+			return
+		fi
+	done
+	printf "1 second"
 }

src/lib/issue/close.sh

@@ -0,0 +1,194 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_ISSUE_CLOSE_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_ISSUE_CLOSE_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/api/gitlab.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/api/gitlab.sh
+
+set -eo pipefail
+
+
+pkgctl_issue_close_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+	cat <<- _EOF_
+		Usage: ${COMMAND} [OPTIONS] [IID]
+
+		This command is used to close an issue in Arch Linux packaging projects. It
+		finalizes the issue by marking it as resolved and optionally providing a reason
+		for its closure.
+
+		By default, the command operates within the current directory, but users have
+		the option to specify a different package base.
+
+		Users can provide a message directly through the command line to explain the
+		reason for closing the issue. Additionally, a specific resolution label can be
+		set to categorize the closure reason, with the default label being "completed."
+
+		OPTIONS
+		    -p, --package PKGBASE    Interact with <pkgbase> instead of the current directory
+		    -m, --message MSG        Use the provided message as the reason for closing
+		    -e, --edit               Edit the reason for closing using an editor
+		    -r, --resolution REASON  Set a specific resolution label (default: completed)
+		    -h, --help               Show this help text
+
+		EXAMPLES
+		    $ ${COMMAND} 42
+		    $ ${COMMAND} --edit --package linux 42
+_EOF_
+}
+
+pkgctl_issue_close() {
+	if (( $# < 1 )); then
+		pkgctl_issue_close_usage
+		exit 0
+	fi
+
+	local iid=""
+	local pkgbase=""
+	local message=""
+	local edit=0
+	local labels=()
+	local resolution="completed"
+
+	local issue note
+	local params="state_event=close"
+
+	# option checking
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_issue_close_usage
+				exit 0
+				;;
+			-m|--message)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				message=$2
+				shift 2
+				;;
+			-p|--package)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				pkgbase=$2
+				shift 2
+				;;
+			-e|--edit)
+				edit=1
+				shift
+				;;
+			--resolution)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! label="$(resolution_as_gitlab_label "$2")"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				params+="&add_labels=${label}"
+				shift 2
+				;;
+			-*)
+				die "invalid argument: %s" "$1"
+				;;
+			*)
+				iid=$1
+				shift
+				;;
+		esac
+	done
+
+	if [[ -z ${iid} ]]; then
+		die "missing issue iid argument"
+	fi
+
+	if [[ -z ${pkgbase} ]]; then
+		if ! [[ -f PKGBUILD ]]; then
+			die "missing --package option or PKGBUILD in current directory"
+		fi
+		pkgbase=$(realpath --canonicalize-existing .)
+	fi
+	pkgbase=$(basename "${pkgbase}")
+
+	# spawn editor
+	if (( edit )); then
+		msgfile=$(mktemp --tmpdir="${WORKDIR}" pkgctl-issue-note.XXXXXXXXXX.md)
+		printf "%s\n" "${message}" >> "${msgfile}"
+		if [[ -n $VISUAL ]]; then
+			$VISUAL "${msgfile}" || die
+		elif [[ -n $EDITOR ]]; then
+			$EDITOR "${msgfile}" || die
+		else
+			die "No usable editor found (tried \$VISUAL, \$EDITOR)."
+		fi
+		message=$(cat "${msgfile}")
+	fi
+
+	# comment on issue
+	if [[ -n ${message} ]]; then
+		if ! note=$(gitlab_create_project_issue_note "${pkgbase}" "${iid}" "${message}"); then
+			msg_error "Failed to comment on issue ${BOLD}#${iid}${ALL_OFF}"
+			exit 1
+		fi
+		msg_success "Commented on issue ${BOLD}#${iid}${ALL_OFF}"
+	fi
+
+	# close issue
+	if ! issue=$(gitlab_project_issue_edit "${pkgbase}" "${iid}" "${params}"); then
+		msg_error "Failed to close issue ${BOLD}#${iid}${ALL_OFF}"
+		exit 1
+	fi
+	msg_success "Closed issue ${BOLD}#${iid}${ALL_OFF}"
+	echo
+
+	{ read -r iid; read -r title; read -r state; read -r created_at; read -r author; } < <(
+		jq --raw-output ".iid, .title, .state, .created_at, .author.username" <<< "${issue}"
+	)
+	mapfile -t labels < <(
+		jq --raw-output ".labels[]" <<< "${issue}"
+	)
+
+	severity="$(gitlab_severity_from_labels "${labels[@]}")"
+	severity_color="$(gitlab_severity_color "${severity}")"
+	created_at=$(relative_date_unit "${created_at}")
+	state_color="$(gitlab_issue_state_color "${state}")"
+	state="$(gitlab_issue_state_display "${state}")"
+	status="$(gitlab_issue_status_from_labels "${labels[@]}")"
+	status_color="$(gitlab_issue_status_color "${status}")"
+
+	scope="$(gitlab_scope_from_labels "${labels[@]}")"
+	scope_color="$(gitlab_scope_color "${scope}")"
+	scope_label=""
+	if [[ ${scope} != unknown ]]; then
+		scope_label="${scope_color}${scope}${ALL_OFF} ${GRAY}•${ALL_OFF} "
+	fi
+
+	resolution_label=""
+	if resolution="$(gitlab_resolution_from_labels "${labels[@]}")"; then
+		resolution_color="$(gitlab_resolution_color "${resolution}")"
+		resolution_label="${resolution_color}${resolution}${ALL_OFF} ${GRAY}•${ALL_OFF} "
+	fi
+
+	printf "%s%s • %s%sseverity %s • %s • %s%sopened by %s %s ago%s\n" \
+		"${state_color}${state}${ALL_OFF}" "${GRAY}" "${resolution_label}" "${severity_color}" "${severity}${GRAY}" \
+		"${status_color}${status}${GRAY}" "${scope_label}" "${GRAY}" "${author}" "${created_at}" "${ALL_OFF}"
+	printf "%s %s\n" "${BOLD}${title}${ALL_OFF}" "${GRAY}#${iid}${ALL_OFF}"
+
+	# show comment
+	if [[ -n ${note} ]]; then
+		{ read -r created_at; read -r author; } < <(
+			jq --raw-output ".created_at, .author.username" <<< "${note}"
+		)
+		body=$(jq --raw-output ".body" <<< "${note}")
+		created_at=$(relative_date_unit "${created_at}")
+
+		echo
+		echo "${BOLD}Comments / Notes${ALL_OFF}"
+		printf -v spaces '%*s' $(( COLUMNS - 2 )) ''
+		printf '%s\n\n' "${spaces// /─}"
+
+		printf "%s commented%s %s ago%s\n" "${author}" "${GRAY}" "${created_at}" "${ALL_OFF}"
+		echo "${body}" | glow
+	fi
+}

src/lib/issue/comment.sh

@@ -0,0 +1,130 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_ISSUE_COMMENT_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_ISSUE_COMMENT_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/api/gitlab.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/api/gitlab.sh
+
+set -eo pipefail
+
+
+pkgctl_issue_comment_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+	cat <<- _EOF_
+		Usage: ${COMMAND} [OPTIONS] [IID]
+
+		This command allows users to add comments to an issue in Arch Linux packaging
+		projects. This command is useful for providing feedback, updates, or any
+		additional information related to an issue directly within the project's issue
+		tracking system.
+
+		By default, the command interacts with the current directory, but users can
+		specify a different package base if needed.
+
+		OPTIONS
+		    -p, --package PKGBASE  Interact with <pkgbase> instead of the current directory
+		    -m, --message MSG      Use the provided message as the comment
+		    -e, --edit             Edit the comment using an editor
+		    -h, --help             Show this help text
+
+		EXAMPLES
+		    $ ${COMMAND} --message "I've attached some logs" 42
+		    $ ${COMMAND} --package linux 42
+		    $ ${COMMAND} 42
+_EOF_
+}
+
+pkgctl_issue_comment() {
+	if (( $# < 1 )); then
+		pkgctl_issue_comment_usage
+		exit 0
+	fi
+
+	local iid=""
+	local pkgbase=""
+	local message=""
+	local edit=0
+
+	local note
+
+	# option checking
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_issue_comment_usage
+				exit 0
+				;;
+			-m|--message)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				message=$2
+				shift 2
+				;;
+			-p|--package)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				pkgbase=$2
+				shift 2
+				;;
+			-e|--edit)
+				edit=1
+				shift
+				;;
+			-*)
+				die "invalid argument: %s" "$1"
+				;;
+			*)
+				iid=$1
+				shift
+				;;
+		esac
+	done
+
+	if [[ -z ${iid} ]]; then
+		die "missing issue iid argument"
+	fi
+
+	if [[ -z ${pkgbase} ]]; then
+		if ! [[ -f PKGBUILD ]]; then
+			die "missing --package option or PKGBUILD in current directory"
+		fi
+		pkgbase=$(realpath --canonicalize-existing .)
+	fi
+	pkgbase=$(basename "${pkgbase}")
+
+	# spawn editor
+	if (( edit )) || [[ -z ${message} ]]; then
+		msgfile=$(mktemp --tmpdir="${WORKDIR}" pkgctl-issue-note.XXXXXXXXXX.md)
+		printf "%s\n" "${message}" >> "${msgfile}"
+		if [[ -n $VISUAL ]]; then
+			$VISUAL "${msgfile}" || die
+		elif [[ -n $EDITOR ]]; then
+			$EDITOR "${msgfile}" || die
+		else
+			die "No usable editor found (tried \$VISUAL, \$EDITOR)."
+		fi
+		message=$(< "${msgfile}")
+	fi
+
+	# comment on issue
+	if ! note=$(gitlab_create_project_issue_note "${pkgbase}" "${iid}" "${message}"); then
+		msg_error "Failed to comment on issue ${BOLD}#${iid}${ALL_OFF}"
+		exit 1
+	fi
+	msg_success "Commented on issue ${BOLD}#${iid}${ALL_OFF}"
+	echo
+
+	{ read -r created_at; read -r author; } < <(
+		jq --raw-output ".created_at, .author.username" <<< "${note}"
+	)
+	body=$(jq --raw-output ".body" <<< "${note}")
+	created_at=$(relative_date_unit "${created_at}")
+
+	printf "%s commented%s %s ago%s\n" "${author}" "${GRAY}" "${created_at}" "${ALL_OFF}"
+	echo "${body}" | glow
+}

src/lib/issue/create.sh

@@ -0,0 +1,296 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_ISSUE_CREATE_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_ISSUE_CREATE_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/api/gitlab.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/api/gitlab.sh
+# shellcheck source=src/lib/util/term.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/term.sh
+
+set -eo pipefail
+
+
+pkgctl_issue_create_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+	cat <<- _EOF_
+		Usage: ${COMMAND} [OPTIONS]
+
+		The create command is used to create a new issue for an Arch Linux package.
+		This command is suitable for reporting bugs, regressions, feature requests, or
+		any other issues related to a package. It provides a flexible way to document
+		and track new issues within the project's issue tracking system.
+
+		By default, the command operates within the current directory, but users can
+		specify a different package base if needed.
+
+		Users can provide a title for the issue directly through the command line.
+		The command allows setting various labels and attributes for the issue, such as
+		confidentiality, priority, scope, severity, and status.
+
+		In case of a failed run, the command can automatically recover to ensure that
+		the issue creation process is completed without losing any data.
+
+		OPTIONS
+		    -p, --package PKGBASE    Interact with <pkgbase> instead of the current directory
+		    -t, --title TITLE        Use the provided title for the issue
+		    -F, --file FILE          Take issue description from <file>
+		    -e, --edit               Edit the issue description using an editor
+		    -w, --web                Continue issue creation with the web interface
+		    --recover                Automatically recover from a failed run
+		    --confidentiality TYPE   Set the issue confidentiality
+		    --priority PRIORITY      Set the priority label
+		    --scope SCOPE            Set the scope label
+		    --severity SEVERITY      Set the severity label
+		    --status STATUS          Set the status label
+		    -h, --help               Show this help text
+
+		EXAMPLES
+		    $ ${COMMAND} --package linux --title "some very informative title"
+_EOF_
+}
+
+pkgctl_issue_create() {
+	if (( $# < 1 )); then
+		pkgctl_issue_create_usage
+		exit 0
+	fi
+
+	local pkgbase=""
+	local title_placeholder="PLACEHOLDER"
+	local title="${title_placeholder}"
+	local description=""
+	local labels=()
+	local msgfile=""
+	local edit=0
+	local web=0
+	local recover=0
+	local confidential=0
+
+	local issue_template_url="https://gitlab.archlinux.org/archlinux/packaging/templates/-/raw/master/.gitlab/issue_templates/Default.md"
+	local issue_template
+	local recovery_home=${XDG_DATA_HOME:-$HOME/.local/share}/devtools/recovery
+	local recovery_file
+	local issue_url
+	local project_path
+	local result
+	local iid
+	local message
+	local editor
+
+	# option checking
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_issue_create_usage
+				exit 0
+				;;
+			-t|--title)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				title=$2
+				shift 2
+				;;
+			-p|--package)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				pkgbase=$2
+				shift 2
+				;;
+			-F|--file)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				msgfile=$2
+				shift 2
+				;;
+			-e|--edit)
+				edit=1
+				shift
+				;;
+			-w|--web)
+				web=1
+				shift
+				;;
+			--recover)
+				recover=1
+				shift
+				;;
+			--confidentiality)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! in_array "$2" "${DEVTOOLS_VALID_ISSUE_CONFIDENTIALITY[@]}"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				if [[ $2 == confidential ]]; then
+					confidential=1
+				fi
+				shift 2
+				;;
+			--priority)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! label="$(priority_as_gitlab_label "$2")"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				labels+=("$label")
+				shift 2
+				;;
+			--scope)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! label="$(scope_as_gitlab_label "$2")"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				labels+=("$label")
+				shift 2
+				;;
+			--severity)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! label="$(severity_as_gitlab_label "$2")"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				labels+=("$label")
+				shift 2
+				;;
+			--status)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! label="$(status_as_gitlab_label "$2")"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				labels+=("$label")
+				shift 2
+				;;
+			*)
+				die "invalid argument: %s" "$1"
+				;;
+		esac
+	done
+
+	if [[ -z ${pkgbase} ]]; then
+		if ! [[ -f PKGBUILD ]]; then
+			die "missing --package option or PKGBUILD in current directory"
+		fi
+		pkgbase=$(realpath --canonicalize-existing .)
+	fi
+	pkgbase=$(basename "${pkgbase}")
+	project_path=$(gitlab_project_name_to_path "${pkgbase}")
+	recovery_file="${recovery_home}/issue_create_${pkgbase}.md"
+
+	# spawn web browser
+	if (( web )); then
+		if ! command -v xdg-open &>/dev/null; then
+			die "The web option requires 'xdg-open'"
+		fi
+		issue_url="${GIT_PACKAGING_URL_HTTPS}/${project_path}/-/issues/new"
+		echo "Opening ${issue_url} in your browser."
+		xdg-open "${issue_url}"
+		return
+	fi
+
+	# check existence of recovery file
+	if [[ -f ${recovery_file} ]]; then
+		if (( ! recover )); then
+			msg_warn "Recovery file already exists: ${recovery_file}"
+			if prompt "${GREEN}${BOLD}?${ALL_OFF} Do you want to recover?"; then
+				msgfile=${recovery_file}
+				recover=1
+				edit=1
+			fi
+		fi
+	fi
+
+	# check existence of msgfile
+	if [[ -n ${msgfile} ]]; then
+		if [[ ! -f ${msgfile} ]]; then
+			msg_error "File does not exist: ${msgfile}${ALL_OFF}"
+			exit 1
+		fi
+	else
+		# prepare msgfile and fetch the issue template
+		if ! issue_template=$(curl --url "${issue_template_url}" --silent); then
+			msg_error "Failed to fetch issue template${ALL_OFF}"
+			exit 1
+		fi
+		# populate message file
+		msgfile=$(mktemp --tmpdir="${WORKDIR}" pkgctl-issue-create.XXXXXXXXXX.md)
+		edit=1
+		printf "# Title: %s\n\n" "${title}" >> "${msgfile}"
+		printf "%s\n" "${issue_template}" >> "${msgfile}"
+	fi
+
+	# spawn editor
+	if (( edit )); then
+		if [[ -n $VISUAL ]]; then
+			editor=${VISUAL}
+		elif [[ -n $EDITOR ]]; then
+			editor=${EDITOR}
+		else
+			die "No usable editor found (tried \$VISUAL, \$EDITOR)."
+		fi
+
+		if ! ${editor} "${msgfile}"; then
+			message=$(< "${msgfile}")
+			pkgctl_issue_write_recovery_file "${pkgbase}" "${message}" "${recovery_file}" "${recover}"
+		fi
+	fi
+
+	# check if the file contains a title
+	message=$(< "${msgfile}")
+	description=${message}
+	if [[ ${message} == "# Title: "* ]]; then
+		title=$(head --lines 1 <<< "${message}")
+		title=${title//# Title: /}
+		description=$(tail --lines +2 <<< "${message}")
+		if [[ ${description} == $'\n'* ]]; then
+			description=$(tail --lines +3 <<< "${message}")
+		fi
+	fi
+
+	# validate title
+	if [[ ${title} == 'PLACEHOLDER' ]]; then
+		msg_error "Invalid issue title: ${title}${ALL_OFF}"
+		pkgctl_issue_write_recovery_file "${pkgbase}" "${message}" "${recovery_file}" "${recover}"
+		exit 1
+	fi
+
+	# create the issue
+	if ! result=$(gitlab_project_issue_create "${pkgbase}" "${title}" "${description}" "${confidential}" "${labels[@]}"); then
+		msg_error "Failed to create issue in ${BOLD}${pkgbase}${ALL_OFF}"
+		pkgctl_issue_write_recovery_file "${pkgbase}" "${message}" "${recovery_file}" "${recover}"
+		exit 1
+	fi
+
+	# delete old recovery file if we succeeded
+	if [[ -f ${recovery_file} ]]; then
+		rm --force "${recovery_file}"
+	fi
+
+	# read issue iid
+	{ read -r iid; } < <(
+		jq --raw-output ".iid" <<< "${result}"
+	)
+	issue_url="${GIT_PACKAGING_URL_HTTPS}/${project_path}/-/issues/${iid}"
+
+	msg_success "Created new issue ${BOLD}#${iid}${ALL_OFF}"
+	printf "%sView this issue on GitLab: %s%s\n" "${GRAY}" "${issue_url}" "${ALL_OFF}"
+}
+
+pkgctl_issue_write_recovery_file() {
+	local pkgbase=$1
+	local message=$2
+	local recovery_file=$3
+	local recover=$4
+
+	if [[ -f ${recovery_file} ]] && (( ! recover )); then
+		msg_warn "Recovery file already exists: ${recovery_file}"
+		if ! prompt "${YELLOW}${BOLD}?${ALL_OFF} Are you sure you want to overwrite it?"; then
+			return 1
+		fi
+	fi
+
+	mkdir -p "$(dirname "${recovery_file}")"
+	printf "%s\n" "${message}" > "${recovery_file}"
+
+	printf "Created recovery file: %s\n" "${recovery_file}"
+	return 0
+}

src/lib/issue/edit.sh

@@ -0,0 +1,311 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_ISSUE_EDIT_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_ISSUE_EDIT_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/api/gitlab.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/api/gitlab.sh
+# shellcheck source=src/lib/util/term.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/term.sh
+
+set -eo pipefail
+
+
+pkgctl_issue_edit_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+	cat <<- _EOF_
+		Usage: ${COMMAND} [OPTIONS] [IID]
+
+		The pkgctl issue edit command is used to modify an existing issue in Arch Linux
+		packaging projects. This command allows users to update the issue's title,
+		description, and various attributes, ensuring that the issue information
+		remains accurate and up-to-date. It also provides a streamlined facility
+		for bug wranglers to categorize and prioritize issues efficiently.
+
+		By default, the command operates within the current directory, but users can
+		specify a different package base if needed.
+
+		In case of a failed run, the command can automatically recover to ensure that
+		the editing process is completed without losing any data.
+
+		OPTIONS
+		    -p, --package PKGBASE   Interact with <pkgbase> instead of the current directory
+		    -t, --title TITLE       Use the provided title for the issue
+		    -e, --edit              Edit the issue title and description using an editor
+		    --recover               Automatically recover from a failed run
+		    --confidentiality TYPE  Set the issue confidentiality
+		    --priority PRIORITY     Set the priority label
+		    --resolution REASON     Set the resolution label
+		    --scope SCOPE           Set the scope label
+		    --severity SEVERITY     Set the severity label
+		    --status STATUS         Set the status label
+		    -h, --help              Show this help text
+
+		EXAMPLES
+		    $ ${COMMAND} --package linux --title "some very informative title"
+_EOF_
+}
+
+pkgctl_issue_edit() {
+	if (( $# < 1 )); then
+		pkgctl_issue_edit_usage
+		exit 0
+	fi
+
+	local pkgbase=""
+	local title=""
+	local description=""
+	local labels=()
+	local confidential=""
+	local msgfile=""
+	local edit=0
+	local recover=0
+
+	local recovery_home=${XDG_DATA_HOME:-$HOME/.local/share}/devtools/recovery
+	local recovery_file
+	local issue_url
+	local project_path
+	local result
+	local iid
+	local message
+
+	# option checking
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_issue_edit_usage
+				exit 0
+				;;
+			-p|--package)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				pkgbase=$2
+				shift 2
+				;;
+			-t|--title)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				title=$2
+				shift 2
+				;;
+			-e|--edit)
+				edit=1
+				shift
+				;;
+			--recover)
+				recover=1
+				shift
+				;;
+			--confidentiality)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! in_array "$2" "${DEVTOOLS_VALID_ISSUE_CONFIDENTIALITY[@]}"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				if [[ $2 == public ]]; then
+					confidential=false
+				else
+					confidential=true
+				fi
+				shift 2
+				;;
+			--priority)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! label="$(priority_as_gitlab_label "$2")"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				labels+=("$label")
+				shift 2
+				;;
+			--resolution)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! label="$(resolution_as_gitlab_label "$2")"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				labels+=("$label")
+				shift 2
+				;;
+			--scope)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! label="$(scope_as_gitlab_label "$2")"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				labels+=("$label")
+				shift 2
+				;;
+			--severity)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! label="$(severity_as_gitlab_label "$2")"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				labels+=("$label")
+				shift 2
+				;;
+			--status)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! label="$(status_as_gitlab_label "$2")"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				labels+=("$label")
+				shift 2
+				;;
+			-*)
+				die "invalid argument: %s" "$1"
+				;;
+			*)
+				iid=$1
+				shift
+				;;
+		esac
+	done
+
+	if [[ -z ${iid} ]]; then
+		die "missing issue iid argument"
+	fi
+
+	if [[ -z ${pkgbase} ]]; then
+		if ! [[ -f PKGBUILD ]]; then
+			die "missing --package option or PKGBUILD in current directory"
+		fi
+		pkgbase=$(realpath --canonicalize-existing .)
+	fi
+	pkgbase=$(basename "${pkgbase}")
+	project_path=$(gitlab_project_name_to_path "${pkgbase}")
+	recovery_file="${recovery_home}/issue_edit_${pkgbase}.md"
+
+	# load current issue data
+	if ! result=$(gitlab_project_issue "${pkgbase}" "${iid}"); then
+		die "Failed to query issue ${pkgbase} #${iid}"
+	fi
+	{ read -r current_title; read -r current_confidential; } < <(
+		jq --raw-output ".title, .confidential" <<< "${result}"
+	)
+	current_description=$(jq --raw-output ".description" <<< "${result}")
+
+	# check existence of recovery file
+	if [[ -f ${recovery_file} ]]; then
+		if (( ! recover )); then
+			msg_warn "Recovery file already exists: ${recovery_file}"
+			if prompt "${GREEN}${BOLD}?${ALL_OFF} Do you want to recover?"; then
+				msgfile=${recovery_file}
+				recover=1
+				edit=1
+			fi
+		fi
+	fi
+
+	# assign data to msgfile
+	if [[ -n ${msgfile} ]]; then
+		# check existence of msgfile
+		if [[ ! -f ${msgfile} ]]; then
+			msg_error "File does not exist: ${msgfile}${ALL_OFF}"
+			exit 1
+		fi
+	fi
+
+	# spawn editor
+	if (( edit )); then
+		if [[ -z ${msgfile} ]]; then
+			msgfile=$(mktemp --tmpdir="${WORKDIR}" pkgctl-issue-create.XXXXXXXXXX.md)
+			if [[ -n ${title} ]]; then
+				printf "# Title: %s\n\n" "${title}" >> "${msgfile}"
+			else
+				printf "# Title: %s\n\n" "${current_title}" >> "${msgfile}"
+			fi
+			printf "%s\n" "${current_description}" >> "${msgfile}"
+		fi
+
+		if [[ -n $VISUAL ]]; then
+			editor=${VISUAL}
+		elif [[ -n $EDITOR ]]; then
+			editor=${EDITOR}
+		else
+			die "No usable editor found (tried \$VISUAL, \$EDITOR)."
+		fi
+
+		if ! ${editor} "${msgfile}"; then
+			message=$(< "${msgfile}")
+			pkgctl_issue_write_recovery_file "${pkgbase}" "${message}" "${recovery_file}" "${recover}"
+			return 1
+		fi
+	fi
+
+	# check if the file contains a title
+	if [[ -n ${msgfile} ]]; then
+		message=$(< "${msgfile}")
+		description=${message}
+		if [[ ${message} == "# Title: "* ]]; then
+			title=$(head --lines 1 <<< "${message}")
+			title=${title//# Title: /}
+			description=$(tail --lines +2 <<< "${message}")
+			if [[ ${description} == $'\n'* ]]; then
+				description=$(tail --lines +3 <<< "${message}")
+			fi
+		fi
+	fi
+
+	# prepare changes
+	data='{}'
+	if [[ -n ${title} ]] && [[ ${title} != "${current_title}" ]]; then
+		result=$(jq --null-input \
+			--arg title "${title}" \
+			'$ARGS.named')
+		data=$(jq --slurp '.[0] * .[1]' <(echo "${data}") <(echo "${result}"))
+	fi
+	if [[ -n ${description} ]] && [[ ${description} != "${current_description}" ]]; then
+		result=$(jq --null-input \
+			--arg description "${description}" \
+			'$ARGS.named')
+		data=$(jq --slurp '.[0] * .[1]' <(echo "${data}") <(echo "${result}"))
+	fi
+	if [[ -n ${confidential} ]] && [[ ${confidential} != "${current_confidential}" ]]; then
+		result=$(jq --null-input \
+			--arg confidential "${confidential}" \
+			'$ARGS.named')
+		data=$(jq --slurp '.[0] * .[1]' <(echo "${data}") <(echo "${result}"))
+	fi
+	if (( ${#labels[@]} )); then
+		result=$(jq --null-input \
+			--arg add_labels "$(join_by , "${labels[@]}")" \
+			'$ARGS.named')
+		data=$(jq --slurp '.[0] * .[1]' <(echo "${data}") <(echo "${result}"))
+	fi
+
+	# edit the issue
+	if ! result=$(gitlab_project_issue_edit "${pkgbase}" "${iid}" "${params}" "${data}"); then
+		msg_error "Failed to edit issue ${BOLD}${pkgbase}${ALL_OFF} #${iid}"
+		pkgctl_issue_write_recovery_file "${pkgbase}" "${message}" "${recovery_file}" "${recover}"
+		exit 1
+	fi
+
+	# delete old recovery file if we succeeded
+	if [[ -f ${recovery_file} ]]; then
+		rm --force "${recovery_file}"
+	fi
+
+	issue_url="${GIT_PACKAGING_URL_HTTPS}/${project_path}/-/issues/${iid}"
+	msg_success "Updated issue ${BOLD}#${iid}${ALL_OFF}"
+	printf "%sView this issue on GitLab: %s%s\n" "${GRAY}" "${issue_url}" "${ALL_OFF}"
+}
+
+pkgctl_issue_write_recovery_file() {
+	local pkgbase=$1
+	local message=$2
+	local recovery_file=$3
+
+	if [[ -f ${recovery_file} ]]; then
+		msg_warn "Recovery file already exists: ${recovery_file}"
+		if ! prompt "${YELLOW}${BOLD}?${ALL_OFF} Are you sure you want to overwrite it?"; then
+			return 1
+		fi
+	fi
+
+	mkdir -p "$(dirname "${recovery_file}")"
+	printf "%s\n" "${message}" > "${recovery_file}"
+
+	printf "Created recovery file: %s\n" "${recovery_file}"
+	return 0
+}

src/lib/issue/issue.sh

@@ -0,0 +1,124 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_ISSUE_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_ISSUE_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+
+set -eo pipefail
+
+
+pkgctl_issue_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+	cat <<- _EOF_
+		Usage: ${COMMAND} [COMMAND] [OPTIONS]
+
+		Work with GitLab packaging issues.
+
+		COMMANDS
+		    close     Close an issue
+		    comment   Comment on an issue
+		    create    Create a new issue
+		    edit      Edit and modify an issue
+		    list      List project or group issues
+		    move      Move an issue to another project
+		    reopen    Reopen a closed issue
+		    view      Display information about an issue
+
+		OPTIONS
+		    -h, --help    Show this help text
+
+		EXAMPLES
+		    $ ${COMMAND} list libfoo libbar
+		    $ ${COMMAND} view 4
+_EOF_
+}
+
+pkgctl_issue() {
+	if (( $# < 1 )); then
+		pkgctl_issue_usage
+		exit 0
+	fi
+
+	# option checking
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_issue_usage
+				exit 0
+				;;
+			close)
+				_DEVTOOLS_COMMAND+=" $1"
+				shift
+				# shellcheck source=src/lib/issue/close.sh
+				source "${_DEVTOOLS_LIBRARY_DIR}"/lib/issue/close.sh
+				pkgctl_issue_close "$@"
+				exit 0
+				;;
+			create)
+				_DEVTOOLS_COMMAND+=" $1"
+				shift
+				# shellcheck source=src/lib/issue/create.sh
+				source "${_DEVTOOLS_LIBRARY_DIR}"/lib/issue/create.sh
+				pkgctl_issue_create "$@"
+				exit 0
+				;;
+			edit|update)
+				_DEVTOOLS_COMMAND+=" $1"
+				shift
+				# shellcheck source=src/lib/issue/edit.sh
+				source "${_DEVTOOLS_LIBRARY_DIR}"/lib/issue/edit.sh
+				pkgctl_issue_edit "$@"
+				exit 0
+				;;
+			list)
+				_DEVTOOLS_COMMAND+=" $1"
+				shift
+				# shellcheck source=src/lib/issue/list.sh
+				source "${_DEVTOOLS_LIBRARY_DIR}"/lib/issue/list.sh
+				pkgctl_issue_list "$@"
+				exit 0
+				;;
+			comment|note)
+				_DEVTOOLS_COMMAND+=" $1"
+				shift
+				# shellcheck source=src/lib/issue/comment.sh
+				source "${_DEVTOOLS_LIBRARY_DIR}"/lib/issue/comment.sh
+				pkgctl_issue_comment "$@"
+				exit 0
+				;;
+			move)
+				_DEVTOOLS_COMMAND+=" $1"
+				shift
+				# shellcheck source=src/lib/issue/move.sh
+				source "${_DEVTOOLS_LIBRARY_DIR}"/lib/issue/move.sh
+				pkgctl_issue_move "$@"
+				exit 0
+				;;
+			reopen)
+				_DEVTOOLS_COMMAND+=" $1"
+				shift
+				# shellcheck source=src/lib/issue/reopen.sh
+				source "${_DEVTOOLS_LIBRARY_DIR}"/lib/issue/reopen.sh
+				pkgctl_issue_reopen "$@"
+				exit 0
+				;;
+			view)
+				_DEVTOOLS_COMMAND+=" $1"
+				shift
+				# shellcheck source=src/lib/issue/view.sh
+				source "${_DEVTOOLS_LIBRARY_DIR}"/lib/issue/view.sh
+				pkgctl_issue_view "$@"
+				exit 0
+				;;
+			-*)
+				die "invalid argument: %s" "$1"
+				;;
+			*)
+				die "invalid command: %s" "$1"
+				;;
+		esac
+	done
+}

src/lib/issue/list.sh

@@ -0,0 +1,417 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_ISSUE_LIST_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_ISSUE_LIST_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/api/gitlab.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/api/gitlab.sh
+# shellcheck source=src/lib/util/term.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/term.sh
+
+set -eo pipefail
+
+
+pkgctl_issue_list_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+	cat <<- _EOF_
+		Usage: ${COMMAND} [OPTIONS] [PKGBASE]
+
+		The pkgctl issue list command is used to list issues associated with a specific
+		packaging project or the entire packaging subgroup in Arch Linux. This command
+		facilitates efficient issue management by allowing users to list and filter
+		issues based on various criteria.
+
+		Results can also be displayed directly in a web browser for easier navigation
+		and review.
+
+		OPTIONS
+		    -g, --group             Get issues from the whole packaging subgroup
+		    -w, --web               View results in a browser
+		    -h, --help              Show this help text
+
+		FILTER
+		    -A, --all               Get all issues including closed
+		    -c, --closed            Get only closed issues
+		    -U, --unconfirmed       Shorthand to filter by unconfirmed status label
+		    --search SEARCH         Search <string> in the fields defined by --in
+		    --in LOCATION           Search in title or description (default: all)
+		    -l, --label NAME        Filter issue by label <name>
+		    --confidentiality TYPE  Filter by confidentiality
+		    --priority PRIORITY     Shorthand to filter by priority label
+		    --resolution REASON     Shorthand to filter by resolution label
+		    --scope SCOPE           Shorthand to filter by scope label
+		    --severity SEVERITY     Shorthand to filter by severity label
+		    --status STATUS         Shorthand to filter by status label
+		    --assignee USERNAME     Filter issues assigned to the given username
+		    --assigned-to-me        Shorthand to filter issues assigned to you
+		    --author USERNAME       Filter issues authored by the given username
+		    --created-by-me         Shorthand to filter issues created by you
+
+		EXAMPLES
+		    $ ${COMMAND} libfoo libbar
+		    $ ${COMMAND} --group --unconfirmed
+_EOF_
+}
+
+pkgctl_issue_list() {
+	if (( $# < 1 )) && [[ ! -f PKGBUILD ]]; then
+		pkgctl_issue_list_usage
+		exit 0
+	fi
+
+	local paths path project_path params web_params label username issue_url
+
+	local group=0
+	local web=0
+	local confidential=0
+	local state=opened
+	local request_data=""
+	local search_in="all"
+	local labels=()
+	local assignee=
+	local author=
+	local scope=all
+	local confidentiality=
+
+	# option checking
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_issue_list_usage
+				exit 0
+				;;
+			-A|--all)
+				state=all
+				shift
+				;;
+			-c|--closed)
+				state=closed
+				shift
+				;;
+			-U|--unconfirmed)
+				labels+=("$(status_as_gitlab_label unconfirmed)")
+				shift
+				;;
+			-g|--group)
+				group=1
+				shift
+				;;
+			-w|--web)
+				web=1
+				shift
+				;;
+			--in)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				search_in=$2
+				shift 2
+				;;
+			--search)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				request_data="search=$2"
+				web_params+="&search=$2"
+				shift 2
+				;;
+			-l|--label)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				labels+=("$2")
+				shift 2
+				;;
+			--confidentiality)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				confidentiality=$2
+				if ! in_array "${confidentiality}" "${DEVTOOLS_VALID_ISSUE_CONFIDENTIALITY[@]}"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				shift 2
+				;;
+			--priority)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! label="$(priority_as_gitlab_label "$2")"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				labels+=("$label")
+				shift 2
+				;;
+			--resolution)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! label="$(resolution_as_gitlab_label "$2")"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				labels+=("$label")
+				shift 2
+				;;
+			--scope)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! label="$(scope_as_gitlab_label "$2")"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				labels+=("$label")
+				shift 2
+				;;
+			--severity)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! label="$(severity_as_gitlab_label "$2")"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				labels+=("$label")
+				shift 2
+				;;
+			--status)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				if ! label="$(status_as_gitlab_label "$2")"; then
+					die "invalid argument for %s: %s" "$1" "$2"
+				fi
+				labels+=("$label")
+				shift 2
+				;;
+			--assignee)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				assignee="$2"
+				shift 2
+				;;
+			--assigned-to-me)
+				scope=assigned_to_me
+				shift
+				;;
+			--author)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				author="$2"
+				shift 2
+				;;
+			--created-by-me)
+				scope=created_by_me
+				shift
+				;;
+			-*)
+				die "invalid argument: %s" "$1"
+				;;
+			*)
+				paths=("$@")
+				break
+				;;
+		esac
+	done
+
+	if [[ ${search_in} == all ]]; then
+		search_in="title,description"
+	else
+		web_params+="&in=${search_in^^}"
+	fi
+	params+="&in=${search_in}"
+
+	if [[ ${state} != all ]]; then
+		params+="&state=${state}"
+	fi
+	web_params+="&state=${state}"
+
+	if (( ${#labels} )); then
+		params+="&labels=$(join_by , "${labels[@]}")"
+		web_params+="&label_name[]=$(join_by "&label_name[]=" "${labels[@]}")"
+	fi
+
+	if [[ -n ${scope} ]]; then
+		params+="&scope=${scope}"
+		if (( web )); then
+			if ! username=$(gitlab_api_get_user); then
+				exit 1
+			fi
+			case "${scope}" in
+				created_by_me) author=${username} ;;
+				assigned_to_me) assignee=${username} ;;
+			esac
+		fi
+	fi
+
+	if [[ -n ${assignee} ]]; then
+		params+="&assignee_username=${assignee}"
+		web_params+="&assignee_username=${assignee}"
+	fi
+
+	if [[ -n ${author} ]]; then
+		params+="&author_username=${author}"
+		web_params+="&author_username=${author}"
+	fi
+
+	if [[ -n ${confidentiality} ]]; then
+		if [[ ${confidentiality} == confidential ]]; then
+			params+="&confidential=true"
+			web_params+="&confidential=yes"
+		else
+			params+="&confidential=false"
+			web_params+="&confidential=no"
+		fi
+	fi
+
+	# check if invoked without any path from within a packaging repo
+	if (( ${#paths[@]} == 0 )); then
+		if [[ -f PKGBUILD ]] && (( ! group )); then
+			paths=("$(realpath --canonicalize-existing .)")
+		elif (( ! group )); then
+			pkgctl_issue_list_usage
+			exit 1
+		fi
+	fi
+
+	if (( web )) && ! command -v xdg-open &>/dev/null; then
+		die "The web option requires 'xdg-open'"
+	fi
+
+	local separator="	"
+
+	for path in "${paths[@]}"; do
+		# skip paths from a glob that aren't directories
+		if [[ -e "${path}" ]] && [[ ! -d "${path}" ]]; then
+			continue
+		fi
+
+		pkgbase=$(basename "${path}")
+		project_path=$(gitlab_project_name_to_path "${pkgbase}")
+
+		echo "${UNDERLINE}${pkgbase}${ALL_OFF}"
+
+		if (( web )); then
+			issue_url="${GIT_PACKAGING_URL_HTTPS}/${project_path}/-/issues/?${web_params}"
+			echo "Opening ${issue_url} in your browser."
+			xdg-open "${issue_url}"
+			continue
+		fi
+
+		status_dir=$(mktemp --tmpdir="${WORKDIR}" --directory pkgctl-gitlab-api.XXXXXXXXXX)
+		printf "📡 Querying GitLab issues API..." > "${status_dir}/status"
+		term_spinner_start "${status_dir}"
+		if ! output=$(gitlab_projects_issues_list "${project_path}" "${status_dir}/status" "${params}" "${request_data}"); then
+			term_spinner_stop "${status_dir}"
+			echo
+			continue
+		fi
+		term_spinner_stop "${status_dir}"
+
+		issue_count=$(jq --compact-output 'length' <<< "${output}")
+		if (( issue_count == 0 )); then
+			echo "No open issues match your search"
+			echo
+			continue
+		else
+			echo "Showing ${issue_count} issues that match your search"
+		fi
+
+		print_issue_list "${output}"
+	done
+
+	if (( group )); then
+		if (( web )); then
+			issue_url="https://${GITLAB_HOST}/groups/${GIT_PACKAGING_NAMESPACE}/-/issues/?${web_params}"
+			echo "Opening ${issue_url} in your browser."
+			xdg-open "${issue_url}"
+			return
+		fi
+
+		status_dir=$(mktemp --tmpdir="${WORKDIR}" --directory pkgctl-gitlab-api.XXXXXXXXXX)
+		printf "📡 Querying GitLab issues API..." > "${status_dir}/status"
+		term_spinner_start "${status_dir}"
+		if ! output=$(gitlab_group_issue_list "${GIT_PACKAGING_NAMESPACE_ID}" "${status_dir}/status" "${params}" "${request_data}"); then
+			term_spinner_stop "${status_dir}"
+			exit 1
+		fi
+		term_spinner_stop "${status_dir}"
+
+		print_issue_list "${output}"
+	fi
+}
+
+print_issue_list() {
+	local output=$1
+	local limit=${2:-100}
+	local i=0
+	local status_dir
+	local longest_pkgname
+
+	# limit results
+	output=$(jq ".[:${limit}]" <<< "${output}")
+
+	mapfile -t project_ids < <(
+		jq --raw-output '[.[].project_id] | unique[]' <<< "${output}")
+
+	status_dir=$(mktemp --tmpdir="${WORKDIR}" --directory pkgctl-gitlab-api.XXXXXXXXXX)
+	printf "📡 Querying GitLab project names..." > "${status_dir}/status"
+	term_spinner_start "${status_dir}"
+
+	# read project_id to name mapping from cache
+	declare -A project_name_lookup=()
+	while read -r project_id project_name; do
+		project_name_lookup[${project_id}]=${project_name}
+	done < <(gitlab_lookup_project_names "${status_dir}/status" "${project_ids[@]}")
+	longest_pkgname=$(longest_package_name_from_ids "${project_ids[@]}")
+
+	term_spinner_stop "${status_dir}"
+
+	result_file=$(mktemp --tmpdir="${WORKDIR}" pkgctl-issue-list.XXXXXXXXXX)
+	printf "📡 Collecting issue information %%spinner%%" > "${status_dir}/status"
+	term_spinner_start "${status_dir}"
+
+	local columns="ID,Title,Scope,Status,Severity,Age"
+	if (( group )); then
+		columns="ID,Package,Title,Scope,Status,Severity,Age"
+	fi
+
+	# pretty print each result
+	while read -r result; do
+		if (( i > limit )); then
+			break
+		fi
+		i=$(( ++i ))
+
+		{ read -r project_id; read -r iid; read -r title; read -r state; read -r created_at; read -r confidential; } < <(
+			jq --raw-output ".project_id, .iid, .title, .state, .created_at, .confidential" <<< "${result}"
+		)
+		mapfile -t labels < <(
+			jq --raw-output ".labels[]" <<< "${result}"
+		)
+
+		pkgbase=${project_name_lookup[${project_id}]}
+		created_at=$(relative_date_unit "${created_at}")
+		severity="$(gitlab_severity_from_labels "${labels[@]}")"
+		severity_color="$(gitlab_severity_color "${severity}")"
+		state_color="$(gitlab_issue_state_color "${state}")"
+		state="$(gitlab_issue_state_display "${state}")"
+		status="$(gitlab_issue_status_from_labels "${labels[@]}")"
+		status_color="$(gitlab_issue_status_color "${status}")"
+		status="$(gitlab_issue_status_short "${status}")"
+		scope="$(gitlab_scope_from_labels "${labels[@]}")"
+		scope_color="$(gitlab_scope_color "${scope}")"
+		scope="$(gitlab_scope_short "${scope}")"
+
+		title_space=$(( COLUMNS - 7 - 10 - 15 - 12 - 10 ))
+		if (( group )); then
+			title_space=$(( title_space - longest_pkgname ))
+		fi
+		if [[ ${confidential} == true ]]; then
+			title_space=$(( title_space - 2 ))
+		fi
+		title=$(trim_string "${title_space}" "${title}")
+		# gum is silly and doesn't allow double quotes
+		title=${title//\"/}
+		if [[ ${confidential} == true ]]; then
+			title="${YELLOW}${PKGCTL_TERM_ICON_CONFIDENTIAL} ${title}${ALL_OFF}"
+		fi
+
+		if (( group )); then
+			printf "%s\n" "${state_color}#$iid${ALL_OFF}${separator}${BOLD}${pkgbase}${separator}${ALL_OFF}${title}${separator}${scope_color}${scope}${ALL_OFF}${separator}${status_color}${status}${separator}${severity_color}${severity}${ALL_OFF}${separator}${GRAY}${created_at}${ALL_OFF}" \
+				>> "${result_file}"
+		else
+			printf "%s\n" "${state_color}#$iid${ALL_OFF}${separator}${title}${separator}${scope_color}${scope}${ALL_OFF}${separator}${status_color}${status}${separator}${severity_color}${severity}${ALL_OFF}${separator}${GRAY}${created_at}${ALL_OFF}" \
+				>> "${result_file}"
+		fi
+	done < <(jq --compact-output '.[]' <<< "${output}")
+
+	term_spinner_stop "${status_dir}"
+
+	gum table --print --border="none" --columns="${columns}" \
+		--separator="${separator}" --file "${result_file}"
+}

src/lib/issue/move.sh

@@ -0,0 +1,156 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_ISSUE_MOVE_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_ISSUE_MOVE_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/cache.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/cache.sh
+# shellcheck source=src/lib/api/gitlab.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/api/gitlab.sh
+
+set -eo pipefail
+
+
+pkgctl_issue_move_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+	cat <<- _EOF_
+		Usage: ${COMMAND} [OPTIONS] [IID] [DESTINATION_PACKAGE]
+
+		The move command allows users to transfer an issue from one project to another
+		within the Arch Linux packaging group. This is useful when an issue is
+		identified to be more relevant or better handled in a different project.
+
+		By default, the command operates within the current directory, but users can
+		specify a different package base from which to move the issue.
+
+		Users must specify the issue ID (IID) and the destination package to which the
+		issue should be moved. A comment message explaining the reason for the move can
+		be provided directly through the command line.
+
+		OPTIONS
+		    -p, --package PKGBASE  Move from <pkgbase> instead of the current directory
+		    -m, --message MSG      Use the provided message as the comment
+		    -e, --edit             Edit the comment using an editor
+		    -h, --help             Show this help text
+
+		EXAMPLES
+		    $ ${COMMAND} 42 to-bar
+		    $ ${COMMAND} --package from-foo 42 to-bar
+_EOF_
+}
+
+pkgctl_issue_move() {
+	if (( $# < 1 )); then
+		pkgctl_issue_move_usage
+		exit 0
+	fi
+
+	local iid=""
+	local pkgbase=""
+	local message=""
+	local edit=0
+
+	local to_project_name to_project_id project_path issue_url to_iid result
+
+	# option checking
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_issue_move_usage
+				exit 0
+				;;
+			-p|--package)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				pkgbase=$2
+				shift 2
+				;;
+			-m|--message)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				message=$2
+				shift 2
+				;;
+			-e|--edit)
+				edit=1
+				shift
+				;;
+			-*)
+				die "invalid argument: %s" "$1"
+				;;
+			*)
+				break
+				;;
+		esac
+	done
+
+	if [[ -z ${pkgbase} ]]; then
+		if ! [[ -f PKGBUILD ]]; then
+			die "missing --package option or PKGBUILD in current directory"
+		fi
+		pkgbase=$(realpath --canonicalize-existing .)
+	fi
+	pkgbase=$(basename "${pkgbase}")
+
+	if (( $# < 2 )); then
+		pkgctl_issue_move_usage
+		exit 1
+	fi
+
+	iid=$1
+	to_project_name=$(basename "$2")
+
+	# spawn editor
+	if (( edit )); then
+		msgfile=$(mktemp --tmpdir="${WORKDIR}" pkgctl-issue-note.XXXXXXXXXX.md)
+		printf "%s\n" "${message}" >> "${msgfile}"
+		if [[ -n $VISUAL ]]; then
+			$VISUAL "${msgfile}" || die
+		elif [[ -n $EDITOR ]]; then
+			$EDITOR "${msgfile}" || die
+		else
+			die "No usable editor found (tried \$VISUAL, \$EDITOR)."
+		fi
+		message=$(cat "${msgfile}")
+	fi
+
+	if ! result=$(gitlab_project "${to_project_name}"); then
+		msg_error "Failed to query target project ${BOLD}${to_project_name}${ALL_OFF}"
+		exit 1
+	fi
+
+	if ! to_project_id=$(jq --raw-output ".id" <<< "${result}"); then
+		msg_error "Failed to query project id for ${BOLD}${to_project_name}${ALL_OFF}"
+		exit 1
+	fi
+
+	# comment on issue
+	if [[ -n ${message} ]]; then
+		if ! result=$(gitlab_create_project_issue_note "${pkgbase}" "${iid}" "${message}"); then
+			msg_error "Failed to comment on issue ${BOLD}#${iid}${ALL_OFF}"
+			exit 1
+		fi
+		msg_success "Commented on issue ${BOLD}#${iid}${ALL_OFF}"
+	fi
+
+	if ! result=$(gitlab_project_issue_move "${pkgbase}" "${iid}" "${to_project_id}"); then
+		msg_error "Failed to move issue ${BOLD}#${iid}${ALL_OFF} to ${BOLD}${to_project_name}${ALL_OFF}"
+		exit 1
+	fi
+
+	if ! to_iid=$(jq --raw-output ".iid" <<< "${result}"); then
+		msg_error "Failed to query issue id for ${BOLD}${to_project_name}${ALL_OFF}"
+		exit 1
+	fi
+
+	project_path=$(gitlab_project_name_to_path "${to_project_name}")
+	issue_url="${GIT_PACKAGING_URL_HTTPS}/${project_path}/-/issues/${to_iid}"
+
+	msg_success "Moved issue ${BOLD}${pkgbase}${ALL_OFF} ${BOLD}#${iid}${ALL_OFF} to ${BOLD}${to_project_name}${ALL_OFF} ${BOLD}#${to_iid}${ALL_OFF}"
+	echo
+	printf "%sView this issue on GitLab: %s%s\n" "${GRAY}" "${issue_url}" "${ALL_OFF}"
+}

src/lib/issue/reopen.sh

@@ -0,0 +1,189 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_ISSUE_REOPEN_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_ISSUE_REOPEN_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/api/gitlab.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/api/gitlab.sh
+
+set -eo pipefail
+
+
+pkgctl_issue_reopen_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+	cat <<- _EOF_
+		Usage: ${COMMAND} [OPTIONS] [IID]
+
+		The reopen command is used to reopen a previously closed issue in Arch Linux
+		packaging projects. This command is useful when an issue needs to be revisited
+		or additional work is required after it was initially closed.
+
+		By default, the command operates within the current directory, but users can
+		specify a different package base if needed.
+
+		Users can provide a message directly through the command line to explain the
+		reason for reopening the issue.
+
+		OPTIONS
+		    -p, --package PKGBASE  Interact with <pkgbase> instead of the current directory
+		    -m, --message MSG      Use the provided message as the comment
+		    -e, --edit             Edit the comment using an editor
+		    -h, --help             Show this help text
+
+		EXAMPLES
+		    $ ${COMMAND} 42
+		    $ ${COMMAND} --package linux 42
+_EOF_
+}
+
+pkgctl_issue_reopen() {
+	if (( $# < 1 )); then
+		pkgctl_issue_reopen_usage
+		exit 0
+	fi
+
+	local iid=""
+	local pkgbase=""
+	local message=""
+	local edit=0
+
+	local issue note result resolution labels
+	local params="state_event=reopen"
+
+	# option checking
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_issue_reopen_usage
+				exit 0
+				;;
+			-p|--package)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				pkgbase=$2
+				shift 2
+				;;
+			-m|--message)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				message=$2
+				shift 2
+				;;
+			-e|--edit)
+				edit=1
+				shift
+				;;
+			-*)
+				die "invalid argument: %s" "$1"
+				;;
+			*)
+				iid=$1
+				shift
+				;;
+		esac
+	done
+
+	if [[ -z ${iid} ]]; then
+		die "missing issue iid argument"
+	fi
+
+	if [[ -z ${pkgbase} ]]; then
+		if ! [[ -f PKGBUILD ]]; then
+			die "missing --package option or PKGBUILD in current directory"
+		fi
+		pkgbase=$(realpath --canonicalize-existing .)
+	fi
+	pkgbase=$(basename "${pkgbase}")
+
+
+	# spawn editor
+	if (( edit )); then
+		msgfile=$(mktemp --tmpdir="${WORKDIR}" pkgctl-issue-note.XXXXXXXXXX.md)
+		printf "%s\n" "${message}" >> "${msgfile}"
+		if [[ -n $VISUAL ]]; then
+			$VISUAL "${msgfile}" || die
+		elif [[ -n $EDITOR ]]; then
+			$EDITOR "${msgfile}" || die
+		else
+			die "No usable editor found (tried \$VISUAL, \$EDITOR)."
+		fi
+		message=$(< "${msgfile}")
+	fi
+
+	# query issue details
+	if ! result=$(gitlab_project_issue "${pkgbase}" "${iid}"); then
+		die "Failed to fetch issue ${pkgbase} #${iid}"
+	fi
+	mapfile -t labels < <(
+		jq --raw-output ".labels[]" <<< "${result}"
+	)
+	if resolution=$(gitlab_resolution_from_labels "${labels[@]}"); then
+		resolution=$(resolution_as_gitlab_label "${resolution}")
+		params+="&remove_labels=${resolution}"
+	fi
+
+	# comment on issue
+	if [[ -n ${message} ]]; then
+		if ! note=$(gitlab_create_project_issue_note "${pkgbase}" "${iid}" "${message}"); then
+			msg_error "Failed to comment on issue ${BOLD}#${iid}${ALL_OFF}"
+			exit 1
+		fi
+		msg_success "Commented on issue ${BOLD}#${iid}${ALL_OFF}"
+	fi
+
+	# reopen issue
+	if ! issue=$(gitlab_project_issue_edit "${pkgbase}" "${iid}" "${params}"); then
+		msg_error "Failed to reopen issue ${BOLD}#${iid}${ALL_OFF}"
+		exit 1
+	fi
+	msg_success "Reopened issue ${BOLD}#${iid}${ALL_OFF}"
+	echo
+
+	{ read -r iid; read -r title; read -r state; read -r created_at; read -r author; } < <(
+		jq --raw-output ".iid, .title, .state, .created_at, .author.username" <<< "${issue}"
+	)
+	mapfile -t labels < <(
+		jq --raw-output ".labels[]" <<< "${issue}"
+	)
+
+	severity="$(gitlab_severity_from_labels "${labels[@]}")"
+	severity_color="$(gitlab_severity_color "${severity}")"
+	created_at=$(relative_date_unit "${created_at}")
+	state_color="$(gitlab_issue_state_color "${state}")"
+	state="$(gitlab_issue_state_display "${state}")"
+	status="$(gitlab_issue_status_from_labels "${labels[@]}")"
+	status_color="$(gitlab_issue_status_color "${status}")"
+
+	scope="$(gitlab_scope_from_labels "${labels[@]}")"
+	scope_color="$(gitlab_scope_color "${scope}")"
+	scope_label=""
+	if [[ ${scope} != unknown ]]; then
+		scope_label="${scope_color}${scope}${ALL_OFF} ${GRAY}•${ALL_OFF} "
+	fi
+
+	printf "%s%s • %sseverity %s • %s • %s%sopened by %s %s ago%s\n" \
+		"${state_color}${state}${ALL_OFF}" "${GRAY}" "${severity_color}" "${severity}${GRAY}" \
+		"${status_color}${status}${GRAY}" "${scope_label}" "${GRAY}" "${author}" "${created_at}" "${ALL_OFF}"
+	printf "%s %s\n" "${BOLD}${title}${ALL_OFF}" "${GRAY}#${iid}${ALL_OFF}"
+
+	# show comment
+	if [[ -n ${note} ]]; then
+		{ read -r created_at; read -r author; } < <(
+			jq --raw-output ".created_at, .author.username" <<< "${note}"
+		)
+		body=$(jq --raw-output ".body" <<< "${note}")
+		created_at=$(relative_date_unit "${created_at}")
+
+		echo
+		echo "${BOLD}Comments / Notes${ALL_OFF}"
+		printf -v spaces '%*s' $(( COLUMNS - 2 )) ''
+		printf '%s\n\n' "${spaces// /─}"
+
+		printf "%s commented%s %s ago%s\n" "${author}" "${GRAY}" "${created_at}" "${ALL_OFF}"
+		echo "${body}" | glow
+	fi
+}

src/lib/issue/view.sh

@@ -0,0 +1,209 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_ISSUE_VIEW_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_ISSUE_VIEW_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/api/gitlab.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/api/gitlab.sh
+# shellcheck source=src/lib/util/term.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/term.sh
+
+set -eo pipefail
+
+
+pkgctl_issue_view_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+	cat <<- _EOF_
+		Usage: ${COMMAND} [OPTIONS] [IID]
+
+		This command is designed to display detailed information about a specific issue
+		in Arch Linux packaging projects. It gathers and pretty prints all relevant
+		data about the issue, providing a comprehensive view that includes the issue's
+		description, status as well as labels and creation date.
+
+		By default, the command operates within the current directory, but users have
+		the option to specify a different package base. Additionally, users can choose
+		to view the issue in a web browser for a more interactive experience.
+
+		OPTIONS
+		    -p, --package PKGBASE  Interact with <pkgbase> instead of the current directory
+		    -c, --comments         Show issue comments and activities
+		    -w, --web              Open issue in a browser
+		    -h, --help             Show this help text
+
+		EXAMPLES
+		    $ ${COMMAND} 4
+		    $ ${COMMAND} --web --package linux 4
+_EOF_
+}
+
+pkgctl_issue_view() {
+	if (( $# < 1 )); then
+		pkgctl_issue_view_usage
+		exit 0
+	fi
+
+	local web=0
+	local comments=0
+	local pkgbase=""
+	local iid=""
+
+	local project_path
+
+	# option checking
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_issue_view_usage
+				exit 0
+				;;
+			-p|--package)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				pkgbase=$2
+				shift 2
+				;;
+			-w|--web)
+				web=1
+				shift
+				;;
+			-c|--comments)
+				comments=1
+				shift
+				;;
+			-*)
+				die "invalid argument: %s" "$1"
+				;;
+			*)
+				iid=$1
+				shift
+				;;
+		esac
+	done
+
+	if [[ -z ${iid} ]]; then
+		die "missing issue iid argument"
+	fi
+
+	if [[ -z ${pkgbase} ]]; then
+		if ! [[ -f PKGBUILD ]]; then
+			die "missing --package option or PKGBUILD in current directory"
+		fi
+		pkgbase=$(realpath --canonicalize-existing .)
+	fi
+	pkgbase=$(basename "${pkgbase}")
+
+	project_path=$(gitlab_project_name_to_path "${pkgbase}")
+
+	if ! result=$(gitlab_project_issue "${pkgbase}" "${iid}"); then
+		die "Failed to view issue ${pkgbase} #${iid}"
+	fi
+
+	{ read -r iid; read -r title; read -r state; read -r created_at; read -r closed_at; read -r author; } < <(
+		jq --raw-output ".iid, .title, .state, .created_at, .closed_at, .author.username" <<< "${result}"
+	)
+	{ read -r upvotes; read -r downvotes; read -r user_notes_count; read -r confidential; } < <(
+		jq --raw-output ".upvotes, .downvotes, .user_notes_count, .confidential" <<< "${result}"
+	)
+	description=$(jq --raw-output ".description" <<< "${result}")
+	mapfile -t labels < <(
+		jq --raw-output ".labels[]" <<< "${result}"
+	)
+	mapfile -t assignees < <(
+		jq --raw-output ".assignees[].username" <<< "${result}"
+	)
+	if [[ ${closed_at} != null ]]; then
+		closed_by=$(jq --raw-output ".closed_by.username" <<< "${result}")
+	fi
+
+	issue_url="${GIT_PACKAGING_URL_HTTPS}/${project_path}/-/issues/${iid}"
+	if (( web )); then
+		if ! command -v xdg-open &>/dev/null; then
+			die "The web option requires 'xdg-open'"
+		fi
+		echo "Opening ${issue_url} in your browser."
+		xdg-open "${issue_url}"
+		return
+	fi
+
+	severity="$(gitlab_severity_from_labels "${labels[@]}")"
+	severity_color="$(gitlab_severity_color "${severity}")"
+	created_at=$(relative_date_unit "${created_at}")
+	state_color="$(gitlab_issue_state_color "${state}")"
+	state="$(gitlab_issue_state_display "${state}")"
+	status="$(gitlab_issue_status_from_labels "${labels[@]}")"
+	status_color="$(gitlab_issue_status_color "${status}")"
+
+	scope="$(gitlab_scope_from_labels "${labels[@]}")"
+	scope_color="$(gitlab_scope_color "${scope}")"
+	scope_label=""
+	if [[ ${scope} != unknown ]]; then
+		scope_label="${scope_color}${scope}${ALL_OFF} ${GRAY}•${ALL_OFF} "
+	fi
+
+	resolution_label=""
+	if resolution="$(gitlab_resolution_from_labels "${labels[@]}")"; then
+		resolution_color="$(gitlab_resolution_color "${resolution}")"
+		resolution_label="${resolution_color}${resolution}${ALL_OFF} ${GRAY}•${ALL_OFF} "
+	fi
+
+	confidential_label=""
+	if [[ ${confidential} == true ]]; then
+		confidential_label="${YELLOW}${PKGCTL_TERM_ICON_CONFIDENTIAL} CONFIDENTIAL${ALL_OFF} ${GRAY}•${ALL_OFF} "
+	fi
+
+	printf "%s%s • %s%s%sseverity %s • %s • %s%sopened by %s %s ago%s\n" \
+		"${state_color}${state}${ALL_OFF}" "${GRAY}" "${confidential_label}" "${resolution_label}" "${severity_color}" "${severity}${ALL_OFF}${GRAY}" \
+		"${status_color}${status}${ALL_OFF}${GRAY}" "${scope_label}" "${GRAY}" "${author}" "${created_at}" "${ALL_OFF}"
+	printf "%s %s\n\n" "${BOLD}${title}${ALL_OFF}" "${GRAY}#${iid}${ALL_OFF}"
+	printf "%s\n" "${description}" | glow
+	printf "\n\n"
+	printf "%s%s upvotes • %s downvotes • %s comments%s\n" "${GRAY}" "${upvotes}" "${downvotes}" "${user_notes_count}" "${ALL_OFF}"
+	printf "%s %s\n" "${BOLD}Labels:${ALL_OFF}" "$(join_by ", " "${labels[@]}")"
+	printf "%s %s\n" "${BOLD}Assignees:${ALL_OFF}" "$(join_by ", " "${assignees[@]}")"
+	if [[ ${closed_at} != null ]]; then
+		closed_at=$(relative_date_unit "${closed_at}")
+		printf "%s %s %s ago\n" "${BOLD}Closed by:${ALL_OFF}" "${closed_by}" "${closed_at}"
+	fi
+
+	if (( comments )); then
+		printf "\n\n"
+		echo "${BOLD}Comments / Notes${ALL_OFF}"
+		printf -v spaces '%*s' $(( COLUMNS - 2 )) ''
+		printf '%s\n' "${spaces// /─}"
+		printf "\n\n"
+
+		status_dir=$(mktemp --tmpdir="${WORKDIR}" --directory pkgctl-gitlab-api.XXXXXXXXXX)
+		printf "📡 Querying GitLab issue notes API..." > "${status_dir}/status"
+		term_spinner_start "${status_dir}"
+		if ! output=$(gitlab_project_issue_notes "${project_path}" "${iid}" "${status_dir}/status" "sort=asc&order_by=created_at"); then
+			term_spinner_stop "${status_dir}"
+			msg_error "Failed to fetch comments"
+			exit 1
+		fi
+		term_spinner_stop "${status_dir}"
+
+		# pretty print each result
+		while read -r result; do
+			{ read -r created_at; read -r author; } < <(
+				jq --raw-output ".created_at, .author.username" <<< "${result}"
+			)
+			body=$(jq --raw-output ".body" <<< "${result}")
+			created_at=$(relative_date_unit "${created_at}")
+
+			printf "%s commented%s %s ago%s\n" "${author}" "${GRAY}" "${created_at}" "${ALL_OFF}"
+			echo "${body}" | glow
+			echo
+		done < <(jq --compact-output '.[]' <<< "${output}")
+
+		echo "$output" > /tmp/notes.json
+	fi
+
+	echo
+	printf "%sView this issue on GitLab: %s%s\n" "${GRAY}" "${issue_url}" "${ALL_OFF}"
+}

src/lib/license.sh

@@ -0,0 +1,66 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+[[ -z ${DEVTOOLS_INCLUDE_LICENSE_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_LICENSE_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+
+set -e
+
+
+pkgctl_license_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+    cat <<- _EOF_
+		Usage: ${COMMAND} [COMMAND] [OPTIONS]
+
+		Check and manage package license compliance.
+
+		COMMANDS
+		    check      Check package license compliance
+		    setup      Automatically detect and setup a basic REUSE config
+
+		OPTIONS
+		    -h, --help    Show this help text
+
+		EXAMPLES
+		    $ ${COMMAND} check libfoo linux libbar
+		    $ ${COMMAND} setup libfoo
+_EOF_
+}
+
+pkgctl_license() {
+	if (( $# < 1 )); then
+		pkgctl_license_usage
+		exit 0
+	fi
+
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_license_usage
+				exit 0
+				;;
+			check)
+				_DEVTOOLS_COMMAND+=" $1"
+				shift
+				# shellcheck source=src/lib/license/check.sh
+				source "${_DEVTOOLS_LIBRARY_DIR}"/lib/license/check.sh
+				pkgctl_license_check "$@"
+				exit $?
+				;;
+			setup)
+				_DEVTOOLS_COMMAND+=" $1"
+				shift
+				# shellcheck source=src/lib/license/setup.sh
+				source "${_DEVTOOLS_LIBRARY_DIR}"/lib/license/setup.sh
+				pkgctl_license_setup "$@"
+				exit 0
+				;;
+			*)
+				die "invalid argument: %s" "$1"
+				;;
+		esac
+	done
+}

src/lib/license/check.sh

@@ -0,0 +1,147 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+#
+[[ -z ${DEVTOOLS_INCLUDE_LICENSE_CHECK_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_LICENSE_CHECK_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+
+source /usr/share/makepkg/util/message.sh
+
+set -eo pipefail
+
+readonly PKGCTL_LICENSE_CHECK_EXIT_COMPLIANT=0
+export PKGCTL_LICENSE_CHECK_EXIT_COMPLIANT
+readonly PKGCTL_LICENSE_CHECK_EXIT_FAILURE=2
+export PKGCTL_LICENSE_CHECK_EXIT_FAILURE
+
+
+pkgctl_license_check_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+	cat <<- _EOF_
+		Usage: ${COMMAND} [OPTIONS] [PKGBASE]...
+
+		Checks package licensing compliance using REUSE and also verifies
+		whether a LICENSE file with the expected Arch Linux-specific 0BSD
+		license text exists.
+
+		Upon execution, it runs 'reuse lint'.
+
+		OPTIONS
+		    -h, --help   Show this help text
+
+		EXAMPLES
+		    $ ${COMMAND} neovim vim
+_EOF_
+}
+
+pkgctl_license_check() {
+	local pkgbases=()
+	local verbose=0
+
+	local license_text
+	license_text=$(< "${_DEVTOOLS_LIBRARY_DIR}"/data/LICENSE)
+
+	local exit_code=${PKGCTL_LICENSE_CHECK_EXIT_COMPLIANT}
+
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_license_check_usage
+				exit 0
+				;;
+			--)
+				shift
+				break
+				;;
+			-*)
+				die "invalid argument: %s" "$1"
+				;;
+			*)
+				pkgbases=("$@")
+				break
+				;;
+		esac
+	done
+
+	if ! command -v reuse &>/dev/null; then
+		die "The \"$_DEVTOOLS_COMMAND\" command requires the 'reuse' CLI tool"
+	fi
+
+	# Check if used without pkgbases in a packaging directory
+	if (( ${#pkgbases[@]} == 0 )); then
+		if [[ -f PKGBUILD ]]; then
+			pkgbases=(".")
+		else
+			pkgctl_license_check_usage
+			exit 1
+		fi
+	fi
+
+	# enable verbose mode when we only have a single item to check
+	if (( ${#pkgbases[@]} == 1 )); then
+		verbose=1
+	fi
+
+	for path in "${pkgbases[@]}"; do
+		# skip paths that are not directories
+		if [[ ! -d "${path}" ]]; then
+			continue
+		fi
+		pushd "${path}" >/dev/null
+
+		if [[ ! -f PKGBUILD ]]; then
+			msg_error "${BOLD}${pkgbase}:${ALL_OFF} no PKGBUILD found"
+			return 1
+		fi
+
+		# reset common PKGBUILD variables
+		unset pkgbase
+
+		# shellcheck source=contrib/makepkg/PKGBUILD.proto
+		if ! . ./PKGBUILD; then
+			msg_error "${BOLD}${pkgbase}:${ALL_OFF} failed to source PKGBUILD"
+			return 1
+		fi
+		pkgbase=${pkgbase:-$pkgname}
+
+		if [[ ! -e LICENSE ]]; then
+			msg_error "${BOLD}${pkgbase}:${ALL_OFF} is missing the LICENSE file"
+			return "${PKGCTL_LICENSE_CHECK_EXIT_FAILURE}"
+		fi
+
+		if [[ ! -L LICENSES/0BSD.txt ]]; then
+			msg_error "${BOLD}${pkgbase}:${ALL_OFF} LICENSES/0BSD should be a symlink to LICENSE but it isn't"
+			return "${PKGCTL_LICENSE_CHECK_EXIT_FAILURE}"
+		fi
+
+		# Check if the local LICENSE file mismatches our expectations
+		if [[ $license_text != $(< LICENSE) ]]; then
+			msg_error "${BOLD}${pkgbase}:${ALL_OFF} LICENSE file doesn't have the expected Arch Linux-specific license text"
+			return "${PKGCTL_LICENSE_CHECK_EXIT_FAILURE}"
+		fi
+
+		# Check for REUSE compliance
+		if ! reuse lint --json | jq --exit-status '.summary.compliant' &>/dev/null; then
+			msg_error "${BOLD}${pkgbase}:${ALL_OFF} repository is not REUSE compliant"
+			exit_code=${PKGCTL_LICENSE_CHECK_EXIT_FAILURE}
+
+			# re-execute reuse lint for human readable output
+			if (( verbose )); then
+				reuse lint
+			fi
+
+			popd >/dev/null
+			continue
+		fi
+
+		msg_success "${BOLD}${pkgbase}:${ALL_OFF} repository is REUSE compliant"
+		popd >/dev/null
+	done
+
+	# return status based on results
+	return "${exit_code}"
+}

src/lib/license/setup.sh

@@ -0,0 +1,272 @@
+#!/bin/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+#
+[[ -z ${DEVTOOLS_INCLUDE_LICENSE_SETUP_SH:-} ]] || return 0
+DEVTOOLS_INCLUDE_LICENSE_SETUP_SH=1
+
+_DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
+# shellcheck source=src/lib/common.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
+# shellcheck source=src/lib/license/check.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/license/check.sh
+
+source /usr/share/makepkg/util/message.sh
+
+set -eo pipefail
+shopt -s nullglob
+
+
+pkgctl_license_setup_usage() {
+	local -r COMMAND=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}
+	cat <<- _EOF_
+		Usage: ${COMMAND} [OPTIONS] [PKGBASE]...
+
+		Automate the creation of a basic REUSE configuration by analyzing the
+		license array specified in the PKGBUILD file of a package.
+
+		If no PKGBASE is specified, the command defaults to using the current
+		working directory.
+
+		OPTIONS
+		    -f, --force   Overwrite existing REUSE configuration
+		    -h, --help    Show this help text
+		    --no-check    Do not run license check after setup
+
+		EXAMPLES
+		    $ ${COMMAND} neovim vim
+_EOF_
+}
+
+pkgctl_license_setup() {
+	local pkgbases=()
+	local force=0
+	local run_check=1
+
+	local path exit_code
+	local checks=()
+
+	while (( $# )); do
+		case $1 in
+			-h|--help)
+				pkgctl_license_setup_usage
+				exit 0
+				;;
+			-f|--force)
+				force=1
+				shift
+				;;
+			--no-check)
+				run_check=0
+				shift
+				;;
+			--)
+				shift
+				break
+				;;
+			-*)
+				die "invalid argument: %s" "$1"
+				;;
+			*)
+				pkgbases=("$@")
+				break
+				;;
+		esac
+	done
+
+	if ! command -v reuse &>/dev/null; then
+		die "The \"$_DEVTOOLS_COMMAND\" command requires the 'reuse' CLI tool"
+	fi
+
+	# Check if used without pkgbases in a packaging directory
+	if (( ${#pkgbases[@]} == 0 )); then
+		if [[ -f PKGBUILD ]]; then
+			pkgbases=(".")
+		else
+			pkgctl_license_setup_usage
+			exit 1
+		fi
+	fi
+
+	exit_code=0
+	for path in "${pkgbases[@]}"; do
+		# skip paths that are not directories
+		if [[ ! -d "${path}" ]]; then
+			continue
+		fi
+
+		pushd "${path}" >/dev/null
+		if license_setup "${path}" "${force}"; then
+			checks+=("${path}")
+		else
+			exit_code=1
+		fi
+		popd >/dev/null
+	done
+
+	# run checks on the setup targets
+	if (( run_check )) && (( ${#checks[@]} >= 1 )); then
+		echo
+		echo 📡 Running checks...
+		pkgctl_license_check "${checks[@]}" || true
+	fi
+
+	return "$exit_code"
+}
+
+license_setup() {
+	local path=$1
+	local force=$2
+	local pkgbase pkgname license
+
+	if [[ ! -f PKGBUILD ]]; then
+		msg_error "${BOLD}${path}:${ALL_OFF} no PKGBUILD found"
+		return 1
+	fi
+
+	# shellcheck source=contrib/makepkg/PKGBUILD.proto
+	if ! . ./PKGBUILD; then
+		msg_error "${BOLD}${path}:${ALL_OFF} failed to source PKGBUILD"
+		return 1
+	fi
+	pkgbase=${pkgbase:-$pkgname}
+
+	# setup LICENSE file
+	if ! license_file_setup "${pkgbase}" "${force}"; then
+		return 1
+	fi
+
+	# setup REUSE.toml
+	if ! reuse_setup "${pkgbase}" "${force}" "${license[@]}"; then
+		return 1
+	fi
+}
+
+is_valid_license() {
+	local license_name=$1
+	local supported_licenses
+	supported_licenses=$(reuse supported-licenses | awk '{print $1}')
+	if grep --quiet "^${license_name}$" <<< "$supported_licenses"; then
+		return 0
+	else
+		return 1
+	fi
+}
+
+license_file_setup() {
+	local pkgbase=$1
+	local force=$2
+
+	local license_text
+	license_text=$(< "${_DEVTOOLS_LIBRARY_DIR}"/data/LICENSE)
+
+	# Write LICENSE file, or check if it mismatches
+	if (( force )) || [[ ! -f LICENSE ]]; then
+		printf "%s\n" "${license_text}" > LICENSE
+		msg_success "${BOLD}${pkgbase}:${ALL_OFF} successfully configured LICENSE"
+	elif [[ -f LICENSE ]]; then
+		# if there is a license file, check whether it has the text we expect
+		existing_license="$(< LICENSE)"
+		if [[ "${license_text}" != "${existing_license}" ]]; then
+			msg_error "${BOLD}${pkgbase}:${ALL_OFF} existing LICENSE file doesn't have expected content, use --force to overwrite"
+			return 1
+		fi
+	fi
+
+	# make sure the LICENSE file is found by REUSE
+	mkdir --parents LICENSES
+	ln --symbolic --force ../LICENSE LICENSES/0BSD.txt
+}
+
+reuse_default_annotations() {
+	cat << EOF
+version = 1
+
+[[annotations]]
+path = [
+    "PKGBUILD",
+    "README.md",
+    "keys/**",
+    ".SRCINFO",
+    ".gitignore",
+    ".nvchecker.toml",
+    "*.install",
+    "*.sysusers",
+    "*sysusers.conf",
+    "*.tmpfiles",
+    "*tmpfiles.conf",
+    "*.logrotate",
+    "*.pam",
+    "*.service",
+    "*.socket",
+    "*.timer",
+    "*.desktop",
+    "*.hook",
+]
+SPDX-FileCopyrightText = "Arch Linux contributors"
+SPDX-License-Identifier = "0BSD"
+EOF
+}
+
+reuse_setup() {
+	local pkgbase=$1
+	local force=$2
+	shift 2
+	local license=("$@")
+
+	# Check if REUSE.toml already exists
+	if (( ! force )) && [[ -f REUSE.toml ]]; then
+		msg_error "${BOLD}${pkgbase}:${ALL_OFF} REUSE.toml already exists, use --force to overwrite"
+		return 1
+	fi
+
+	reuse_default_annotations > REUSE.toml
+
+	local warning_occurred=0
+	local patches=(*.patch)
+	# If there are patches and there's only a single well-known license listed in the package,
+	# we can generate the annotations for the patches, otherwise we will fail to do so and warn
+	# the user.
+	if (( ${#patches} )); then
+		# If there are multiple licenses, we can't make a good guess about which license the
+		# patches should have. In case the first element contains a space, we are dealing with
+		# a complex SPDX license identifier.
+		if (( ${#license[@]} > 1 )) || [[ ${license[0]} =~ [[:space:]] ]]; then
+			msg_warn "${BOLD}${pkgbase}:${ALL_OFF} .patch files were found but couldn't automatically guess a suitable license because PKGBUILD has multiple licenses"
+			patch_annotations "${pkgbase}" "TODO-Choose-a-license" "${patches[@]}" >> REUSE.toml
+			warning_occurred=1
+		elif ! is_valid_license "${license[0]}"; then
+			msg_warn "${BOLD}${pkgbase}:${ALL_OFF} .patch files were found but couldn't automatically guess a suitable license because the PKGBUILD license '${license[0]}' is not a recognized SPDX license"
+			patch_annotations "${pkgbase}" "TODO-Choose-a-license" "${patches[@]}" >> REUSE.toml
+			warning_occurred=1
+		else
+			patch_annotations "${pkgbase}" "${license[0]}" "${patches[@]}" >> REUSE.toml
+		fi
+	fi
+
+	if (( warning_occurred )); then
+		msg_warn "${BOLD}${pkgbase}:${ALL_OFF} configured REUSE but a warning occurred, manually edit and fix REUSE.toml"
+		return 1
+	else
+		reuse download --all
+		msg_success "${BOLD}${pkgbase}:${ALL_OFF} successfully configured REUSE.toml"
+	fi
+}
+
+patch_annotations() {
+	local pkgbase=$1
+	local license_identifier=$2
+	shift 2
+	local patches=("$@")
+
+	local annotations
+	annotations+="\n[[annotations]]\n"
+	annotations+="path = [\n"
+	for patch in "${patches[@]}"; do
+		annotations+="    \"$(basename "${patch}")\",\n"
+	done
+	annotations+="]\n"
+	annotations+="SPDX-FileCopyrightText = \"${pkgbase} contributors\"\n"
+	annotations+="SPDX-License-Identifier = \"${license_identifier}\""
+	echo -e "${annotations}"
+}

src/lib/release.sh

@@ -157,6 +157,11 @@ pkgctl_release() {
 			repo=${REPO}
 		fi
 
+		# output a warning if .nvchecker.toml does not exists
+		if [[ ! -f ".nvchecker.toml" ]]; then
+			warning "Nvchecker integration is not set, run 'pkgctl version setup --help' to see how to automate the creation of the '.nvchecker.toml' configuration file"
+		fi
+
 		if (( TESTING )); then
 			repo="${repo}-testing"
 		elif (( STAGING )); then

src/lib/repo/clone.sh

@@ -65,6 +65,7 @@ pkgctl_repo_clone() {
 	local CONFIGURE_OPTIONS=()
 	local jobs=
 	jobs=$(nproc)
+	local -a pkgbases
 
 	# variables
 	local command=${_DEVTOOLS_COMMAND:-${BASH_SOURCE[0]##*/}}

src/lib/search.sh

@@ -8,8 +8,6 @@ DEVTOOLS_INCLUDE_SEARCH_SH=1
 _DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
 # shellcheck source=src/lib/common.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
-# shellcheck source=src/lib/cache.sh
-source "${_DEVTOOLS_LIBRARY_DIR}"/lib/cache.sh
 # shellcheck source=src/lib/api/gitlab.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/api/gitlab.sh
 # shellcheck source=src/lib/valid-search.sh
@@ -95,10 +93,8 @@ pkgctl_search() {
 	# variables
 	local bat_style="header,grid"
 	local default_filter="-path:keys/pgp/*.asc"
-	local graphql_lookup_batch=200
-	local output result query entries from until length
-	local project_name_cache_file project_name_lookup project_ids project_id project_name project_slice
-	local mapping_output path startline currentline data line
+	local output result project_name_lookup project_ids project_id project_name
+	local path startline currentline data line
 
 	while (( $# )); do
 		case $1 in
@@ -176,68 +172,20 @@ pkgctl_search() {
 	term_spinner_stop "${status_dir}"
 	msg_success "Querying GitLab search API"
 
-	# collect project ids whose name needs to be looked up
-	project_name_cache_file=$(get_cache_file gitlab/project_id_to_name)
-	lock 11 "${project_name_cache_file}" "Locking project name cache"
 	mapfile -t project_ids < <(
-		jq --raw-output '[.[].project_id] | unique[]' <<< "${output}" | \
-			grep --invert-match --file <(awk '{ print $1 }' < "${project_name_cache_file}" ))
+		jq --raw-output '[.[].project_id] | unique[]' <<< "${output}")
 
-	# look up project names
-	tmp_file=$(mktemp --tmpdir="${WORKDIR}" pkgctl-gitlab-api-spinner.tmp.XXXXXXXXXX)
 	printf "📡 Querying GitLab project names..." > "${status_dir}/status"
 	term_spinner_start "${status_dir}"
-	local entries="${#project_ids[@]}"
-	local until=0
-	while (( until < entries )); do
-		from=${until}
-		until=$(( until + graphql_lookup_batch ))
-		if (( until > entries )); then
-			until=${entries}
-		fi
-		length=$(( until - from ))
-
-		percentage=$(( 100 * until / entries ))
-		printf "📡 Querying GitLab project names: %s/%s [%s] %%spinner%%" \
-			"${BOLD}${until}" "${entries}" "${percentage}%${ALL_OFF}"  \
-			> "${tmp_file}"
-		mv "${tmp_file}" "${status_dir}/status"
-
-		project_slice=("${project_ids[@]:${from}:${length}}")
-		printf -v projects '"gid://gitlab/Project/%s",' "${project_slice[@]}"
-		query='{
-			projects(after: "" ids: ['"${projects}"']) {
-				pageInfo {
-					startCursor
-					endCursor
-					hasNextPage
-				}
-				nodes {
-					id
-					name
-				}
-			}
-		}'
-		mapping_output=$(gitlab_api_get_project_name_mapping "${query}")
-
-		# update cache
-		while read -r project_id project_name; do
-			printf "%s %s\n" "${project_id}" "${project_name}" >> "${project_name_cache_file}"
-		done < <(jq --raw-output \
-			'.[] | "\(.id | rindex("/") as $lastSlash | .[$lastSlash+1:]) \(.name)"' \
-			<<< "${mapping_output}")
-	done
-	term_spinner_stop "${status_dir}"
-	msg_success "Querying GitLab project names"
 
 	# read project_id to name mapping from cache
 	declare -A project_name_lookup=()
 	while read -r project_id project_name; do
 		project_name_lookup[${project_id}]=${project_name}
-	done < "${project_name_cache_file}"
+	done < <(gitlab_lookup_project_names "${status_dir}/status" "${project_ids[@]}")
 
-	# close project name cache lock
-	lock_close 11
+	term_spinner_stop "${status_dir}"
+	msg_success "Querying GitLab project names"
 
 	# output mode JSON
 	if [[ ${output_format} == json ]]; then

src/lib/util/pacman.sh

@@ -25,6 +25,7 @@ update_pacman_repo_cache() {
 	lock 10 "${_DEVTOOLS_PACMAN_CACHE_DIR}.lock" "Locking pacman database cache"
 	fakeroot -- pacman --config "${_DEVTOOLS_PACMAN_CONF_DIR}/${repo}.conf" \
 		--dbpath "${_DEVTOOLS_PACMAN_CACHE_DIR}" \
+		--disable-sandbox \
 		-Sy
 	lock_close 10
 }
@@ -32,6 +33,7 @@ update_pacman_repo_cache() {
 get_pacman_repo_from_pkgbuild() {
 	local path=${1:-PKGBUILD}
 	local repo=${2:-multilib}
+	local -a pkgnames
 
 	# shellcheck source=contrib/makepkg/PKGBUILD.proto
 	mapfile -t pkgnames < <(source "${path}"; printf "%s\n" "${pkgname[@]}")
@@ -66,6 +68,7 @@ get_pkgnames_from_repo_pkgbase() {
 	local repo=$1
 	shift
 	local pkgbases=("$@")
+	local -a pkgnames
 
 	# update the pacman repo cache if it doesn't exist yet
 	if [[ ! -d "${_DEVTOOLS_PACMAN_CACHE_DIR}" ]]; then

src/lib/util/term.sh

@@ -7,6 +7,8 @@ DEVTOOLS_INCLUDE_UTIL_TERM_SH=1
 
 set -eo pipefail
 
+readonly PKGCTL_TERM_ICON_CONFIDENTIAL=⛔
+export PKGCTL_TERM_ICON_CONFIDENTIAL
 
 readonly PKGCTL_TERM_SPINNER_DOTS=Dots
 export PKGCTL_TERM_SPINNER_DOTS

src/lib/valid-issue.sh

@@ -0,0 +1,68 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+
+# shellcheck disable=2034
+DEVTOOLS_VALID_ISSUE_SEVERITY=(
+	lowest
+	low
+	medium
+	high
+	critical
+)
+
+# shellcheck disable=2034
+DEVTOOLS_VALID_ISSUE_PRIORITY=(
+	low
+	normal
+	high
+	urgent
+)
+
+# shellcheck disable=2034
+DEVTOOLS_VALID_ISSUE_STATUS=(
+	confirmed
+	in-progress
+	in-review
+	on-hold
+	unconfirmed
+	waiting-input
+	waiting-upstream
+)
+
+# shellcheck disable=2034
+DEVTOOLS_VALID_ISSUE_SCOPE=(
+	bug
+	feature
+	security
+	question
+	regression
+	enhancement
+	documentation
+	reproducibility
+	out-of-date
+)
+
+# shellcheck disable=2034
+DEVTOOLS_VALID_ISSUE_SEARCH_LOCATION=(
+	title
+	description
+	all
+)
+
+# shellcheck disable=2034
+DEVTOOLS_VALID_ISSUE_RESOLUTION=(
+	cant-reproduce
+	completed
+	duplicate
+	invalid
+	not-a-bug
+	upstream
+	wont-fix
+)
+
+# shellcheck disable=2034
+DEVTOOLS_VALID_ISSUE_CONFIDENTIALITY=(
+	confidential
+	public
+)

src/lib/valid-version.sh

@@ -0,0 +1,10 @@
+#!/hint/bash
+#
+# SPDX-License-Identifier: GPL-3.0-or-later
+:
+
+# shellcheck disable=2034
+DEVTOOLS_VALID_VERSION_OUTPUT_FORMAT=(
+	pretty
+	json
+)

src/lib/version/check.sh

@@ -10,6 +10,8 @@ _DEVTOOLS_LIBRARY_DIR=${_DEVTOOLS_LIBRARY_DIR:-@pkgdatadir@}
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/common.sh
 # shellcheck source=src/lib/util/term.sh
 source "${_DEVTOOLS_LIBRARY_DIR}"/lib/util/term.sh
+# shellcheck source=src/lib/valid-version.sh
+source "${_DEVTOOLS_LIBRARY_DIR}"/lib/valid-version.sh
 
 source /usr/share/makepkg/util/message.sh
 
@@ -39,8 +41,15 @@ pkgctl_version_check_usage() {
 		check failures.
 
 		OPTIONS
-		    -v, --verbose    Display results including up-to-date versions
-		    -h, --help       Show this help text
+		    -h, --help           Show this help text
+
+		FILTER OPTIONS
+		    -v, --verbose        Display all results including up-to-date versions
+
+		OUTPUT OPTIONS
+		    --json               Enable printing in JSON; Shorthand for '--format json'
+		    -F, --format FORMAT  Controls the output format of the results;
+		                         FORMAT is 'pretty', or 'json' (default: pretty)
 
 		EXAMPLES
 		    $ ${COMMAND} neovim vim
@@ -50,9 +59,11 @@ _EOF_
 pkgctl_version_check() {
 	local pkgbases=()
 	local verbose=0
+	local output_format=pretty
 
 	local path status_file path pkgbase upstream_version result
 
+	local json_data=()
 	local up_to_date=()
 	local out_of_date=()
 	local failure=()
@@ -66,6 +77,18 @@ pkgctl_version_check() {
 				pkgctl_version_check_usage
 				exit 0
 				;;
+			--json)
+				output_format=json
+				shift
+				;;
+			-F|--format)
+				(( $# <= 1 )) && die "missing argument for %s" "$1"
+				output_format="${2}"
+				if ! in_array "${output_format}" "${DEVTOOLS_VALID_VERSION_OUTPUT_FORMAT[@]}"; then
+					die "Unknown output format: %s" "${output_format}"
+				fi
+				shift 2
+				;;
 			-v|--verbose)
 				verbose=1
 				shift
@@ -103,9 +126,11 @@ pkgctl_version_check() {
 		verbose=1
 	fi
 
-	# start a terminal spinner as checking versions takes time
-	status_dir=$(mktemp --tmpdir="${WORKDIR}" --directory pkgctl-version-check-spinner.XXXXXXXXXX)
-	term_spinner_start "${status_dir}"
+	if [[ ${output_format} == pretty ]]; then
+		# start a terminal spinner as checking versions takes time
+		status_dir=$(mktemp --tmpdir="${WORKDIR}" --directory pkgctl-version-check-spinner.XXXXXXXXXX)
+		term_spinner_start "${status_dir}"
+	fi
 
 	for path in "${pkgbases[@]}"; do
 		# skip paths that are not directories
@@ -114,19 +139,23 @@ pkgctl_version_check() {
 		fi
 		pushd "${path}" >/dev/null
 
-		# update the current terminal spinner status
-		(( ++current_item ))
-		pkgctl_version_check_spinner \
-			"${status_dir}" \
-			"${#up_to_date[@]}" \
-			"${#out_of_date[@]}" \
-			"${#failure[@]}" \
-			"${current_item}" \
-			"${#pkgbases[@]}"
+		if [[ ${output_format} == pretty ]]; then
+			# update the current terminal spinner status
+			(( ++current_item ))
+			pkgctl_version_check_spinner \
+				"${status_dir}" \
+				"${#up_to_date[@]}" \
+				"${#out_of_date[@]}" \
+				"${#failure[@]}" \
+				"${current_item}" \
+				"${#pkgbases[@]}"
+		fi
 
 		if [[ ! -f "PKGBUILD" ]]; then
-			result="${BOLD}${path}${ALL_OFF}: no PKGBUILD found"
-			failure+=("${result}")
+			result="no PKGBUILD found"
+			pkgbase=$(basename "${path}")
+			json_data+=("$(build_json_package_version_entry "${pkgbase}" failure "${result}" false null null)")
+			failure+=("${BOLD}${pkgbase}${ALL_OFF}: ${result}")
 			popd >/dev/null
 			continue
 		fi
@@ -138,27 +167,36 @@ pkgctl_version_check() {
 		pkgbase=${pkgbase:-$pkgname}
 
 		if ! result=$(get_upstream_version); then
-			result="${BOLD}${pkgbase}${ALL_OFF}: ${result}"
-			failure+=("${result}")
+			json_data+=("$(build_json_package_version_entry "${pkgbase}" failure "${result}" false "${pkgver}" null)")
+			failure+=("${BOLD}${pkgbase}${ALL_OFF}: ${result}")
 			popd >/dev/null
 			continue
 		fi
 		upstream_version=${result}
 
 		if ! result=$(vercmp "${upstream_version}" "${pkgver}"); then
-			result="${BOLD}${pkgbase}${ALL_OFF}: failed to compare version ${upstream_version} against ${pkgver}"
+			result="failed to compare version ${upstream_version} against ${pkgver}"
+			json_data+=("$(build_json_package_version_entry "${pkgbase}" failure "${result}" false "${pkgver}" "${upstream_version}")")
+			result="${BOLD}${pkgbase}${ALL_OFF}: ${result}"
 			failure+=("${result}")
 			popd >/dev/null
 			continue
 		fi
 
 		if (( result == 0 )); then
+			if (( verbose )); then
+				json_data+=("$(build_json_package_version_entry "${pkgbase}" success null false "${pkgver}" "${upstream_version}")")
+			fi
 			result="${BOLD}${pkgbase}${ALL_OFF}: current version ${PURPLE}${pkgver}${ALL_OFF} is latest"
 			up_to_date+=("${result}")
 		elif (( result < 0 )); then
+			if (( verbose )); then
+				json_data+=("$(build_json_package_version_entry "${pkgbase}" warning "local version is newer than upstream" false "${pkgver}" "${upstream_version}")")
+			fi
 			result="${BOLD}${pkgbase}${ALL_OFF}: current version ${PURPLE}${pkgver}${ALL_OFF} is newer than ${DARK_GREEN}${upstream_version}${ALL_OFF}"
 			up_to_date+=("${result}")
 		elif (( result > 0 )); then
+			json_data+=("$(build_json_package_version_entry "${pkgbase}" success null true "${pkgver}" "${upstream_version}")")
 			result="${BOLD}${pkgbase}${ALL_OFF}: upgrade from version ${PURPLE}${pkgver}${ALL_OFF} to ${DARK_GREEN}${upstream_version}${ALL_OFF}"
 			out_of_date+=("${result}")
 		fi
@@ -166,8 +204,18 @@ pkgctl_version_check() {
 		popd >/dev/null
 	done
 
-	# stop the terminal spinner after all checks
-	term_spinner_stop "${status_dir}"
+	if [[ ${output_format} == pretty ]]; then
+		# stop the terminal spinner after all checks
+		term_spinner_stop "${status_dir}"
+	fi
+
+	# early exit for json output
+	if [[ ${output_format} == json ]]; then
+		jq --null-input \
+			'$ARGS.positional' \
+			--jsonargs "${json_data[@]}"
+		return 0
+	fi
 
 	if (( verbose )) && (( ${#up_to_date[@]} > 0 )); then
 		printf "%sUp-to-date%s\n" "${section_separator}${BOLD}${UNDERLINE}" "${ALL_OFF}"
@@ -208,6 +256,24 @@ pkgctl_version_check() {
 	return "${exit_code}"
 }
 
+build_json_package_version_entry() {
+	local pkgbase=$1
+	local status=$2
+	local message=$3
+	local is_out_of_date=$4
+	local local_version=$5
+	local upstream_version=$6
+
+	jq --null-input \
+		--arg pkgbase "${pkgbase}" \
+		--arg status "${status}" \
+		--arg message "${message}" \
+		--arg local_version "${local_version}" \
+		--arg upstream_version "${upstream_version}" \
+		--argjson out_of_date "${is_out_of_date}" \
+		'$ARGS.named | walk(if type == "string" and (. == "null" or . == "") then null else . end)'
+}
+
 get_upstream_version() {
 	local config=.nvchecker.toml
 	local output errors upstream_version
@@ -226,7 +292,8 @@ get_upstream_version() {
 		opts+=(--keyfile "${keyfile}")
 	fi
 
-	if ! output=$(GIT_TERMINAL_PROMPT=0 nvchecker --file "${config}" --logger json "${opts[@]}" 2>&1 | \
+	if ! output=$(GIT_TERMINAL_PROMPT=0 GIT_CONFIG_GLOBAL=/dev/null GIT_CONFIG_SYSTEM=/dev/null \
+			nvchecker --file "${config}" --logger json "${opts[@]}" 2>&1 | \
 			jq --raw-output 'select((.level != "debug") and (.event != "ignoring invalid version"))'); then
 		printf "failed to run nvchecker: %s" "${output}"
 		return 1
@@ -242,6 +309,12 @@ get_upstream_version() {
 		return 1
 	fi
 
+	# implement none source for packages like meta and virtual packages that are always up to date
+	if [[ ${upstream_version} == None ]] && grep --quiet --extended-regexp '^source *= *"manual"' "${config}" &>/dev/null; then
+		printf '%s' "${pkgver:-${upstream_version}}"
+		return 0
+	fi
+
 	printf "%s" "${upstream_version}"
 	return 0
 }

src/lib/version/setup.sh

@@ -33,6 +33,7 @@ pkgctl_version_setup_usage() {
 		    --prefer-platform-api  Prefer platform specific GitHub/GitLab API for complex cases
 		    --url URL              Derive check target from URL instead of source array
 		    --no-check             Do not run version check after setup
+		    --no-upstream          Setup a blank config for packages without upstream sources
 		    -h, --help             Show this help text
 
 		EXAMPLES
@@ -46,6 +47,7 @@ pkgctl_version_setup() {
 	local run_check=1
 	local force=0
 	local prefer_platform_api=0
+	local no_upstream=0
 
 	local path ret
 	local checks=()
@@ -73,6 +75,10 @@ pkgctl_version_setup() {
 				run_check=0
 				shift
 				;;
+			--no-upstream)
+				no_upstream=1
+				shift
+				;;
 			--)
 				shift
 				break
@@ -105,7 +111,7 @@ pkgctl_version_setup() {
 		fi
 
 		pushd "${path}" >/dev/null
-		if nvchecker_setup "${path}" "${force}" "${prefer_platform_api}" "${override_url}"; then
+		if nvchecker_setup "${path}" "${force}" "${prefer_platform_api}" "${override_url}" "${no_upstream}"; then
 			checks+=("${path}")
 		else
 			ret=1
@@ -127,6 +133,7 @@ nvchecker_setup() {
 	local force=$2
 	local prefer_platform_api=$3
 	local override_url=$4
+	local no_upstream=$5
 	local pkgbase pkgname source source_url proto domain url_parts section body
 
 	if [[ ! -f PKGBUILD ]]; then
@@ -159,7 +166,7 @@ nvchecker_setup() {
 	fi
 
 	# skip empty source array
-	if (( ${#source[@]} == 0 )); then
+	if (( ${#source[@]} == 0 )) && (( ! no_upstream )); then
 		msg_error "${BOLD}${pkgbase}:${ALL_OFF} PKGBUILD has no source array"
 		return 1
 	fi
@@ -245,6 +252,10 @@ nvchecker_setup() {
 		esac
 	done
 
+	if (( no_upstream )); then
+		body='source = "manual"'
+	fi
+
 	if [[ -z "${body}" ]]; then
 		msg_error "${BOLD}${pkgbase}:${ALL_OFF} unable to automatically setup nvchecker"
 		return 1

src/makerepropkg.in

@@ -93,14 +93,36 @@ get_makepkg_conf() {
     local fname=${1}
     local arch="${2}"
     local makepkg_conf="${3}"
+
     if ! buildtool_file=$(get_pkgfile "${fname}"); then
-        error "failed to retrieve ${fname}"
+       error "failed to retrieve ${fname}"
+       return 1
+    fi
+    buildtool_file="${buildtool_file/file:\/\//}"
+    msg "using makepkg.conf from ${fname}"
+
+    # try to handle config of legacy devtools
+    if bsdtar --list --file "${buildtool_file}" "usr/share/devtools/makepkg-${arch}.conf" &>/dev/null; then
+        bsdtar --extract --to-stdout --fast-read --file "${buildtool_file}" "usr/share/devtools/makepkg-${arch}.conf" > "${makepkg_conf}"
+        return $?
+    fi
+
+    msg2 "extracting ${arch}.conf from devtools archive"
+    if ! bsdtar --extract --to-stdout --fast-read --file "${buildtool_file}" "usr/share/devtools/makepkg.conf.d/${arch}.conf" > "${makepkg_conf}"; then
+        error "failed to extract 'usr/share/devtools/makepkg.conf.d/${arch}.conf' from devtools archive"
         return 1
     fi
-    msg2 "using makepkg.conf from ${fname}"
-	if ! bsdtar xOqf "${buildtool_file/file:\/\//}" "usr/share/devtools/makepkg.conf.d/${arch}.conf" > "${makepkg_conf}"; then
-		bsdtar xOqf "${buildtool_file/file:\/\//}" "usr/share/devtools/makepkg-${arch}.conf" > "${makepkg_conf}"
-	fi
+
+    mkdir --parents "${makepkg_conf}.d"
+    if bsdtar --list --file "${buildtool_file}" "usr/share/devtools/makepkg.conf.d/conf.d" &>/dev/null; then
+        msg2 "extracting conf.d from devtools archive"
+        bsdtar --extract --file "${buildtool_file}" --cd "${makepkg_conf}.d" --strip-components 4 "usr/share/devtools/makepkg.conf.d/conf.d"
+    fi
+    if bsdtar --list --file "${buildtool_file}" "usr/share/devtools/makepkg.conf.d/${arch}.conf.d" &>/dev/null; then
+        msg2 "extracting ${arch}.conf.d from devtools archive"
+        bsdtar --extract --file "${buildtool_file}" --cd "${makepkg_conf}.d" --strip-components 4 "usr/share/devtools/makepkg.conf.d/${arch}.conf.d"
+    fi
+
     return 0
 }
 
@@ -186,7 +208,7 @@ for f in "${splitpkgs[@]}"; do
 done
 
 if (( ${#cache_dirs[@]} == 0 )); then
-	mapfile -t cache_dirs < <(pacman-conf CacheDir)
+    mapfile -t cache_dirs < <(pacman-conf CacheDir)
 fi
 
 ORIG_HOME=${HOME}

src/offload-build.in

@@ -23,7 +23,6 @@ fi
 repo=extra
 arch=x86_64
 server=build.archlinux.org
-rsyncopts=("${RSYNC_OPTS[@]}")
 
 usage() {
     cat <<- _EOF_
@@ -78,7 +77,8 @@ fi
 
 archbuild_cmd=("${repo}${archbuild_arch:+-$archbuild_arch}-build" "$@")
 
-trap 'rm -rf $TEMPDIR' EXIT INT TERM QUIT
+[[ -z ${WORKDIR:-} ]] && setup_workdir
+export TEMPDIR=$(mktemp --tmpdir="${WORKDIR}" --directory offload-build.XXXXXXXXXX)
 
 # Load makepkg.conf variables to be available
 load_makepkg_config
@@ -86,32 +86,41 @@ load_makepkg_config
 # Use a source-only tarball as an intermediate to transfer files. This
 # guarantees the checksums are okay, and guarantees that all needed files are
 # transferred, including local sources, install scripts, and changelogs.
-export TEMPDIR=$(mktemp -d --tmpdir offload-build.XXXXXXXXXX)
-export SRCPKGDEST=${TEMPDIR}
+export SRCPKGDEST="${TEMPDIR}"
 makepkg_source_package || die "unable to make source package"
 
 # Temporary cosmetic workaround makepkg if SRCDEST is set somewhere else
 # but an empty src dir is created in PWD. Remove once fixed in makepkg.
 rmdir --ignore-fail-on-non-empty src 2>/dev/null || true
 
-mapfile -t files < <(
-    # This is sort of bash golfing but it allows running a mildly complex
-    # command over ssh with a single connection.
-    # shellcheck disable=SC2145
-    cat "$SRCPKGDEST"/*"$SRCEXT" |
-        ssh $server '
-            export TERM="'"${TERM}"'"
-            temp="${XDG_CACHE_HOME:-$HOME/.cache}/offload-build" &&
-            mkdir -p "$temp" &&
-            temp=$(mktemp -d -p "$temp") &&
-            cd "$temp" &&
-            {
-                bsdtar --strip-components 1 -xvf - &&
-                export LOGDEST="" &&
-                script -qefc "'"${archbuild_cmd[@]@Q}"'" /dev/null &&
-                printf "%s\n" "" "-> build complete" &&
-                printf "\t%s\n" "$temp"/*
-            } >&2 &&
+# Create a temporary directory on the server
+remote_temp=$(
+    ssh "${SSH_OPTS[@]}" -- "$server" '
+        temp="${XDG_CACHE_HOME:-$HOME/.cache}/offload-build" &&
+        mkdir -p "$temp" &&
+        mktemp --directory --tmpdir="$temp"
+')
+
+# Transfer the srcpkg to the server
+msg "Transferring source package to the server..."
+_srcpkg=("$SRCPKGDEST"/*"$SRCEXT")
+srcpkg="${_srcpkg[0]}"
+rsync "${RSYNC_OPTS[@]}" -- "$srcpkg" "$server":"$remote_temp" || die
+
+# Prepare the srcpkg on the server
+msg "Extracting srcpkg"
+ssh "${SSH_OPTS[@]}" -- "$server" "cd ${remote_temp@Q} && bsdtar --strip-components 1 -xvf $(basename "$srcpkg")" || die
+
+# Run the build command on the server
+msg "Running archbuild"
+# shellcheck disable=SC2145
+if ssh "${SSH_OPTS[@]}" -t -- "$server" "cd ${remote_temp@Q} && export LOGDEST="" && ${archbuild_cmd[@]@Q}"; then
+    msg "Build complete"
+
+    # Get an array of files that should be downloaded from the server
+    mapfile -t files < <(
+        ssh "${SSH_OPTS[@]}" -- "$server" "
+            cd ${remote_temp@Q}"' &&
             makepkg_user_config="${XDG_CONFIG_HOME:-$HOME/.config}/pacman/makepkg.conf" &&
             makepkg_config="/usr/share/devtools/makepkg.conf.d/'"${arch}"'.conf" &&
             if [[ -f /usr/share/devtools/makepkg.conf.d/'"${repo}"'-'"${arch}"'.conf ]]; then
@@ -120,26 +129,34 @@ mapfile -t files < <(
             while read -r file; do
                 [[ -f "${file}" ]] && printf "%s\n" "${file}" ||:
             done < <(makepkg --config <(cat "${makepkg_user_config}" "${makepkg_config}" 2>/dev/null) --packagelist) &&
-            printf "%s\n" "${temp}/PKGBUILD"
+            printf "%s\n" '"${remote_temp@Q}/PKGBUILD"'
 
-            find "${temp}" -name "*.log"
-')
+            find '"${remote_temp@Q}"' -name "*.log"
+    ')
+else
+    # Build failed, only the logs should be downloaded from the server
+    mapfile -t files < <(
+        ssh "${SSH_OPTS[@]}" -- "$server" '
+            find '"${remote_temp@Q}"' -name "*.log"
+    ')
+fi
 
 
 if (( ${#files[@]} )); then
     msg 'Downloading files...'
-    rsync "${rsyncopts[@]}" "${files[@]/#/$server:}" "${TEMPDIR}/" || die
+    rsync "${RSYNC_OPTS[@]}" -- "${files[@]/#/$server:}" "${TEMPDIR}/" || die
 
     if is_globfile "${TEMPDIR}"/*.log; then
         mv "${TEMPDIR}"/*.log "${LOGDEST:-${PWD}}/"
     fi
-    # missing PKGBUILD download means the build failed
-    if [[ ! -f "${TEMPDIR}/PKGBUILD" ]]; then
+    if is_globfile "${TEMPDIR}"/*.pkg.tar*; then
+        # Building a package may change the PKGBUILD during update_pkgver
+        mv "${TEMPDIR}/PKGBUILD" "${PWD}/"
+        mv "${TEMPDIR}"/*.pkg.tar* "${PKGDEST:-${PWD}}/"
+    else
         error "Build failed, check logs in ${LOGDEST:-${PWD}}"
         exit 1
     fi
-    mv "${TEMPDIR}/PKGBUILD" "${PWD}/"
-    mv "${TEMPDIR}"/*.pkg.tar* "${PKGDEST:-${PWD}}/"
 else
     exit 1
 fi

src/pkgctl.in

@@ -24,6 +24,8 @@ usage() {
 		    build   Build packages inside a clean chroot
 		    db      Pacman database modification for package update, move etc
 		    diff    Compare package files using different modes
+		    issue   Work with GitLab packaging issues
+		    license Check and manage package licenses
 		    release Release step to commit, tag and upload build artifacts
 		    repo    Manage Git packaging repositories and their configuration
 		    search  Search for an expression across the GitLab packaging group
@@ -104,6 +106,22 @@ while (( $# )); do
 			diffpkg "$@"
 			exit 0
 			;;
+		issue)
+			_DEVTOOLS_COMMAND+=" $1"
+			shift
+			# shellcheck source=src/lib/issue/issue.sh
+			source "${_DEVTOOLS_LIBRARY_DIR}"/lib/issue/issue.sh
+			pkgctl_issue "$@"
+			exit 0
+			;;
+		license)
+			_DEVTOOLS_COMMAND+=" $1"
+			shift
+			# shellcheck source=src/lib/license.sh
+			source "${_DEVTOOLS_LIBRARY_DIR}"/lib/license.sh
+			pkgctl_license "$@"
+			exit 0
+			;;
 		release)
 			_DEVTOOLS_COMMAND+=" $1"
 			shift