update ChangeLog

Fixes: https://github.com/openrc/openrc/issues/104

.gitignore

@@ -1,4 +1,4 @@
-*.bz2
+*.gz
 
 *.diff
 *.patch

BUSYBOX.md

@@ -22,9 +22,6 @@ or recognize the nofail option in fstab.
 
 CONFIG_SETFONT -- The setfont applet does not support the -u option from kbd.
 
-CONFIG_IP -- The ip applet  doesn't support the "scope" modifier for
-"ip route add" and "ip address add".
-
 CONFIG_BB_SYSCTL -- The sysctl applet does not support the --system command
 line switch.
 

FEATURE-REMOVAL-SCHEDULE.md

@@ -38,7 +38,7 @@ Who:
 
 When: 1.0
 
-Why: Depprecated in favor of extra_commands, extra_started_commands
+Why: Deprecated in favor of extra_commands, extra_started_commands
 	 and extra_stopped_commands.
 
 Who:
@@ -47,7 +47,7 @@ Who:
 
 When: 1.0
 
-Why: Depprecated in favor of executable scripts in @SYSCONFDIR@/local.d
+Why: Deprecated in favor of executable scripts in @SYSCONFDIR@/local.d
 
 Who:
 

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.20.5
+VERSION=	0.22.4
 PKG=		${NAME}-${VERSION}

NEWS.md

@@ -3,6 +3,46 @@
 This file will contain a list of notable changes for each release. Note
 the information in this file is in reverse order.
 
+## OpenRC-0.22
+
+In previous versions of OpenRC, configuration information was processed
+so that service-specific configuration stored in /etc/conf.d/* was
+overridden by global configuration stored in /etc/rc.conf. This release
+reverses that. Global configuration is now overridden by
+service-specific configuration.
+
+The swapfiles service, which was basically a copy of the swap service,
+has been removed. If you are only using swap partitions, this change
+will not affect you. If you are using swap files, please adjust the
+dependencies of the swap service as shown in /etc/conf.d/swap.
+
+## OpenRC-0.21
+
+This version adds a daemon supervisor which can start daemons and
+restart them if they crash. See supervise-daemon-guide.md in the
+distribution for details on its use.
+
+It is now possible to mark certain mount points as critical. If these
+mount points are unable to be mounted, localmount or netmount will fail.
+This is handled in /etc/conf.d/localmount and /etc/conf.d/netmount. See
+these files for the setup.
+
+The deprecation messages in 0.13.x for runscript and rc are now
+made visible in preparation for the removal of these binaries in 1.0.
+
+The steps you should take to get rid of these warnings is to run openrc
+in initialization steps instead of rc and change the shebang lines in
+service scripts to refer to "openrc-run" instead of "runscript".
+
+In 0.21.4, a modules-load service was added. This works like the
+equivalent service in systemd. It looks for files named *.conf first in
+/usr/lib/modules-load.d, then /run/modules-load.d, then
+/etc/modules-load.d. These files contain a list of modules, one per
+line, which should be loaded into the kernel. If a file name appears in
+/run/modules-load.d, it overrides a file of the same name in
+/usr/lib/modules-load.d. A file appearing in /etc/modules-load.d
+overrides a file of the same name in both previous directories.
+
 ## OpenRC-0.19
 
 This version adds a net-online service. By default, this

README.md

@@ -43,9 +43,6 @@ We don't support building a static OpenRC with PAM.
 
 You may need to use `PROGLDFLAGS=-Wl,-Bstatic` on glibc instead of just `-static`.
 
-If you debug memory under valgrind, add `-DDEBUG_MEMORY`
-to your `CPPFLAGS` so that all malloc memory should be freed at exit.
-
 If you are building OpenRC for a Gentoo Prefix installation, add `MKPREFIX=yes`.
 
 `PKG_PREFIX` should be set to where packages install to by default.

conf.d/.gitignore

@@ -1,2 +0,0 @@
-network
-staticroute

conf.d/Makefile

@@ -1,19 +1,17 @@
 include ../mk/net.mk
 
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount netmount urandom tmpfiles \
+CONF=	bootmisc fsck hostname localmount netmount swap urandom tmpfiles \
 		${CONF-${OS}}
 
 ifeq (${MKNET},yes)
 CONF+= network staticroute
-TARGETS+=	network staticroute
-CLEANFILES+=	network staticroute
 endif
 
 MK=	../mk
 include ${MK}/os.mk
 
-CONF-FreeBSD=	ipfw moused powerd rarpd savecore syscons
+CONF-FreeBSD=	ipfw modules moused powerd rarpd savecore syscons
 
 CONF-Linux=	consolefont devfs dmesg hwclock keymaps killprocs modules mtab \
 	net-online
@@ -21,9 +19,3 @@ CONF-Linux=	consolefont devfs dmesg hwclock keymaps killprocs modules mtab \
 CONF-NetBSD=	moused rarpd savecore
 
 include ${MK}/scripts.mk
-
-network: network.in network${SFX}
-	cat $^ > $@
-
-staticroute: staticroute${SFX}
-	cp $@${SFX} $@

conf.d/bootmisc

@@ -9,7 +9,7 @@ wipe_tmp="YES"
 # This may be useful if you need the kernel boot log afterwards
 log_dmesg="YES"
 
-# Save the previous dmesg log to dmesc.old
+# Save the previous dmesg log to dmesg.old
 # This may be useful if you need to compare the current boot to the
 # previous one.
 #previous_dmesg=no

conf.d/localmount

@@ -2,8 +2,9 @@
 # This could be useful for some NFS related work.
 #no_umounts="/dir1:/var/dir2"
 #
-# Ignore errors when mounting local file systems.
-# This should be left alone unless you know what you are doing. If it is
-# set to yes, not only will we allow mount failures, but we will ignore
-# syntax errors in fstab.
-#ignore_mount_errors="NO"
+# Mark certain mount points as critical.
+# This contains aspace separated list of mount points which should be
+# considered critical. If one of these mount points cannot be mounted,
+# localmount will fail.
+# By default, this is empty.
+#critical_mounts="/home /var"

conf.d/modules

@@ -1,18 +1,22 @@
-# You can define a list modules for a specific kernel version,
-# a released kernel version, a main kernel version or just a list.
+# Linux users can define a list of modules for a specific kernel version,
+# a released kernel version, a main kernel version or all kernel versions.
 # The most specific versioned variable will take precedence.
+# FreeBSD users can only use the modules="foo bar" setting.
 #modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
 #modules_2_6_23="tun ieee1394"
 #modules_2_6="tun"
 #modules_2="ipv6"
 #modules="ohci1394"
 
-# You can give modules a different name when they load - the new name
+# Linux users can give modules a different name when they load - the new name
 # will also be used to pick arguments below.
+# This is not supported on FreeBSD.
 #modules="dummy:dummy1"
 
-# Give the modules some arguments if needed, per version if necessary.
+# Linux users can give the modules some arguments if needed, per version
+# if necessary.
 # Again, the most specific versioned variable will take precedence.
+# This is not supported on FreeBSD.
 #module_ieee1394_args="debug"
 #module_ieee1394_args_2_6_23_gentoo_r5="debug2"
 #module_ieee1394_args_2_6_23="debug3"

conf.d/net-online

@@ -1,6 +1,6 @@
 # The interfaces setting controls which interfaces the net-online
-# service considers in deciding whether the network is active. By
-# default, it is all ethernet or wireless LAN interfaces.
+# service considers in deciding whether the network is active. The
+# default is all interfaces that support ethernet.
 #interfaces=""
 
 # This setting controls whether a ping to the default gateway is

conf.d/netmount

@@ -38,3 +38,10 @@
 # other words, please change it to be more suited to your system.
 #
 rc_need="net"
+#
+# Mark certain mount points as critical.
+# This contains aspace separated list of mount points which should be
+# considered critical. If one of these mount points cannot be mounted,
+# netmount will fail.
+# By default, this is empty.
+#critical_mounts="/home /var"

conf.d/network

@@ -0,0 +1,80 @@
+# Assign static IP addresses and run custom scripts per interface.
+# Seperate commands with ;
+# Prefix with ! to run a shell script.
+# Use \$int to represent the interface
+#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
+
+# You also have ifup_eth0 and ifdown_eth0 to run other commands when
+# eth0 is started and stopped.
+# You should note that we don't stop the network at system shutdown by default.
+# If you really need this, then set keep_network=NO
+
+# Lastly, the interfaces variable pulls in virtual interfaces that cannot
+# be automatically detected.
+#interfaces="br0 bond0 vlan0"
+
+# You can also use files instead of variables here if you like:
+# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0
+# /etc/ip.eth0 is equivalent to ifconfig_eth0
+# /etc/ifup.eth0 is equivalent to ifup_eth0
+# /etc/ifdown.eth0 is equivalent to ifdown_eth0
+# Any files found will automatically be put into the interfaces variable.
+# You don't need to escape variables in files, so use $int instead of \$int.
+
+# If you require DHCP, you should install dhcpcd and add it to the boot or
+# default runlevel.
+
+# NIS users can set the domain name here
+#domainname="foobar"
+
+# You can add a default route.
+# The way this is done is slightly different depending on the operating system.
+#
+# *BSD:
+#defaultroute="192.168.0.1"
+#defaultroute6="2001:a:b:c"
+#Hurd/Linux (ifconfig):
+#defaultroute="gw 192.168.0.1"
+#defaultroute6="gw 2001:a:b:c"
+
+# The remainder of this file applies to Linux only and shows how
+# iproute2 is supported along with other examples.
+
+# ifconfig under Linux is not that powerful and doesn't easily handle
+# multiple addresses
+# On the other hand, iproute2 is quite powerful and is also supported
+#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
+
+# You can also use iproute2 to add the default route.
+#defaultiproute="via 192.168.0.1"
+#defaultiproute6="via 2001:a:b:c"
+
+# ip doesn't handle MTU like ifconfig, but we can do it like so
+#ifup_eth0="ip link set \$int mtu 1500"
+
+# Create a bonded interface
+#interfaces="bond0"
+#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
+#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
+#ifdown_bond0="rmmod bonding"
+
+# Create tap interface and a bridge interface.
+# We add the tap to the bridge.
+# An external program, like dhcpcd, will configure the IP on the bridge
+#interfaces="tun0 br0"
+#ifup_tun0="tunctl -t \$int"
+#ifdown_tun0="tunctl -d \$int"
+#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
+#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
+
+# Create VLAN
+#interfaces="eth0_2 eth0_3 eth0_4"
+#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
+#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
+#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
+#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
+#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
+
+# Normally you would use wpa_supplicant to configure wireless, but you can
+# use iwconfig also
+#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

conf.d/network.BSD.in

@@ -1,4 +0,0 @@
-
-# You can assign a default route
-#defaultroute="192.168.0.1"
-#defaultroute6="2001:a:b:c"

conf.d/network.GNU-kFreeBSD.in

@@ -1,4 +0,0 @@
-
-# You can assign a default route
-#defaultroute="192.168.0.1"
-#defaultroute6="2001:a:b:c"

conf.d/network.GNU.in

@@ -1,4 +0,0 @@
-
-# You can assign a default route
-#defaultroute="gw 192.168.0.1"
-#defaultroute6="gw 2001:a:b:c"

conf.d/network.Linux.in

@@ -1,43 +0,0 @@
-
-# You can assign a default route
-#defaultroute="gw 192.168.0.1"
-#defaultroute6="gw 2001:a:b:c"
-
-# ifconfig under Linux is not that powerful and doesn't easily handle
-# multiple addresses
-# On the other hand, ip (iproute2) is quite powerful and is also supported
-#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
-
-# You can also use ip to add the default route.
-#defaultiproute="via 192.168.0.1"
-#defaultiproute6="via 2001:a:b:c"
-
-# ip doesn't handle MTU like ifconfig, but we can do it like so
-#ifup_eth0="ip link set \$int mtu 1500"
-
-# Create a bonded interface
-#interfaces="bond0"
-#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
-#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
-#ifdown_bond0="rmmod bonding"
-
-# Create tap interface and a bridge interface.
-# We add the tap to the bridge.
-# An external program, like dhcpcd, will configure the IP on the bridge
-#interfaces="tun0 br0"
-#ifup_tun0="tunctl -t \$int"
-#ifdown_tun0="tunctl -d \$int"
-#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
-#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
-
-# Create VLAN
-#interfaces="eth0_2 eth0_3 eth0_4"
-#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
-#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
-#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
-#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
-#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
-
-# Normally you would use wpa_supplicant to configure wireless, but you can
-# use iwconfig also
-#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

conf.d/network.in

@@ -1,28 +0,0 @@
-# Assign static IP addresses and run custom scripts per interface.
-# Seperate commands with ;
-# Prefix with ! to run a shell script.
-# Use \$int to represent the interface
-#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
-
-# You also have ifup_eth0 and ifdown_eth0 to run other commands when
-# eth0 is started and stopped.
-# You should note that we don't stop the network at system shutdown by default.
-# If you really need this, then set keep_network=NO
-
-# Lastly, the interfaces variable pulls in virtual interfaces that cannot
-# be automatically detected.
-#interfaces="br0 bond0 vlan0"
-
-# You can also use files instead of variables here if you like:
-# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0
-# /etc/ip.eth0 is equivalent to ifconfig_eth0
-# /etc/ifup.eth0 is equivalent to ifup_eth0
-# /etc/ifdown.eth0 is equivalent to ifdown_eth0
-# Any files found will automatically be put into the interfaces variable.
-# You don't need to escape variables in files, so use $int instead of \$int.
-
-# If you require DHCP, you should install dhcpcd and it to the boot or
-# default runlevel.
-
-# NIS users can set the domain name here
-#domainname="foobar"

conf.d/staticroute

@@ -0,0 +1,26 @@
+# Static routes are defined differently depending on your operating
+# system, so please be sure to use the correct syntax.
+# Do not use this file to define the default route.
+# In all settings, multiple routes should be separated using ; or new lines.
+
+# Define static routes on Linux using route. See route(8) for syntax.
+#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
+#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
+
+# Define static routes on Linux using iproute2. See ip(8) for syntax.
+#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"
+
+# Define static routes on GNU/Hurd. See route(8) for syntax.
+# /etc/route.conf(5) takes precedence over this configuration.
+# FIXME: "net ..." not supported
+#staticroute="net 192.168.0.0 -netmask 255.255.255.0 --address 10.73.1.1
+#net 192.168.1.0 -netmask 255.255.255.0 --address 10.73.1.1"
+
+# Define static routes on GNU/KFreeBSD. See route(8) for syntax.
+#staticroute="net 192.168.0.0 10.73.1.1 netmask 255.255.255.0
+#net 192.168.1.0 10.73.1.1 netmask 255.255.255.0"
+
+# Define static routes on other BSD systems. See route(8) for syntax.
+# /etc/route.conf(5) takes precedence over this configuration.
+#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
+#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.BSD.in

@@ -1,6 +0,0 @@
-# Separate multiple routes using ; or new lines.
-# /etc/route.conf(5) takes precedence over this configuration.
-
-# Example static routes. See route(8) for syntax.
-#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
-#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.GNU-kFreeBSD.in

@@ -1,5 +0,0 @@
-# Separate multiple routes using ; or new lines.
-
-# Example static routes. See route(8) for syntax.
-#staticroute="net 192.168.0.0 10.73.1.1 netmask 255.255.255.0
-#net 192.168.1.0 10.73.1.1 netmask 255.255.255.0"

conf.d/staticroute.GNU.in

@@ -1,7 +0,0 @@
-# Separate multiple routes using ; or new lines.
-# /etc/route.conf(5) takes precedence over this configuration.
-
-# Example static routes. See route(8) for syntax.
-# FIXME: "net ..." not supported
-#staticroute="net 192.168.0.0 -netmask 255.255.255.0 --address 10.73.1.1
-#net 192.168.1.0 -netmask 255.255.255.0 --address 10.73.1.1"

conf.d/staticroute.Linux.in

@@ -1,8 +0,0 @@
-# Separate multiple routes using ; or new lines.
-
-# Example static routes. See route(8) for syntax.
-#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
-#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
-
-# Example static routes using iproute2. See ip(8) for syntax.
-#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"

conf.d/swap

@@ -0,0 +1,13 @@
+# If you are only using local swap partitions, you should not change
+# this file. Otherwise, you need to uncomment the below rc_before line
+# followed by the appropriate rc_need line.
+#rc_before="!localmount"
+#
+# If you are using swap files stored on local file systems, uncomment
+# this line.
+#rc_need="localmount"
+#
+# If you are using swap files stored on network file systems or swap
+# partitions stored on network block devices such as iSCSI, uncomment
+# this line.
+#rc_need="netmount"

etc/.gitignore

@@ -1,3 +1,2 @@
-rc.conf
 rc
 rc.shutdown

etc/Makefile

@@ -1,10 +1,8 @@
 DIR=	${SYSCONFDIR}
-SRCS=	rc.conf.in rc.in rc.shutdown.in
+SRCS=	rc.in rc.shutdown.in
 BIN=	${BIN-${OS}}
 CONF=	rc.conf ${BIN-${OS}}
 
-CLEANFILES+=	rc.conf
-
 MK=	../mk
 include ${MK}/os.mk
 
@@ -23,6 +21,3 @@ CONF-NetBSD=
 SED_EXTRA=	${SED_EXTRA-${OS}}
 
 include ${MK}/scripts.mk
-
-rc.conf: rc.conf.in rc.conf.${OS}
-	${SED} ${SED_REPLACE} ${SED_EXTRA} $^ > $@

etc/rc.conf

@@ -117,6 +117,9 @@
 # Some daemons are started and stopped via start-stop-daemon.
 # We can set some things on a per service basis, like the nicelevel.
 #SSD_NICELEVEL="-19"
+# Or the ionice level. The format is class[:data] , just like the
+# --ionice start-stop-daemon parameter.
+#SSD_IONICELEVEL="2:2"
 
 # Pass ulimit parameters
 # If you are using bash in POSIX mode for your shell, note that the
@@ -146,6 +149,102 @@
 #rc_foo_bar_after="clock"
 
 # You can also remove dependencies.
-# This is mainly used for saying which servies do NOT provide net.
+# This is mainly used for saying which services do NOT provide net.
 #rc_net_tap0_provide="!net"
 
+# This is the subsystem type.
+# It is used to match against keywords set by the keyword call in the
+# depend function of service scripts.
+#
+# It should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+# If it is commented out, automatic detection will be used.
+#
+# The list below shows all possible settings as well as the host
+# operating systems where they can be used and autodetected.
+#
+# ""               - nothing special
+# "docker"         - Docker container manager (Linux)
+# "jail"           - Jail (DragonflyBSD or FreeBSD)
+# "lxc"            - Linux Containers
+# "openvz"         - Linux OpenVZ
+# "prefix"         - Prefix
+# "rkt"            - CoreOS container management system (Linux)
+# "subhurd"        - Hurd subhurds (to be checked)
+# "systemd-nspawn" - Container created by systemd-nspawn (Linux)
+# "uml"            - Usermode Linux
+# "vserver"        - Linux vserver
+# "xen0"           - Xen0 Domain (Linux and NetBSD)
+# "xenU"           - XenU Domain (Linux and NetBSD)
+#rc_sys=""
+
+# on Linux and Hurd, this is the number of ttys allocated for logins
+# It is used in the consolefont, keymaps, numlock and termencoding
+# service scripts.
+rc_tty_number=12
+
+##############################################################################
+# LINUX CGROUPS RESOURCE MANAGEMENT
+
+# If you have cgroups turned on in your kernel, this switch controls
+# whether or not a group for each controller is mounted under
+# /sys/fs/cgroup.
+# None of the other options in this section work if this is set to "NO".
+#rc_controller_cgroups="YES"
+
+# The following settings allow you to set up values for the cgroup
+# controllers for your services.
+# They can be set in this file;, however, if you do this, the settings
+# will apply to all of your services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the names of the settings followed by their
+# values. Each variable can hold multiple settings.
+# For example, you would use this to set the cpu.shares setting in the
+# cpu controller to 512 for your service.
+# rc_cgroup_cpu="
+# cpu.shares 512
+# "
+#
+#For more information about the adjustments that can be made with
+#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
+
+# Set the blkio controller settings for this service.
+#rc_cgroup_blkio=""
+
+# Set the cpu controller settings for this service.
+#rc_cgroup_cpu=""
+
+# Add this service to the cpuacct controller (any value means yes).
+#rc_cgroup_cpuacct=""
+
+# Set the cpuset controller settings for this service.
+#rc_cgroup_cpuset=""
+
+# Set the devices controller settings for this service.
+#rc_cgroup_devices=""
+
+# Set the hugetlb controller settings for this service.
+#rc_cgroup_hugetlb=""
+
+# Set the memory controller settings for this service.
+#rc_cgroup_memory=""
+
+# Set the net_cls controller settings for this service.
+#rc_cgroup_net_cls=""
+
+# Set the net_prio controller settings for this service.
+#rc_cgroup_net_prio=""
+
+# Set the pids controller settings for this service.
+#rc_cgroup_pids=""
+
+# Set this to YES if you want all of the processes in a service's cgroup
+# killed when the service is stopped or restarted.
+# This should not be set globally because it kills all of the service's
+# child processes, and most of the time this is undesirable. Please set
+# it in /etc/conf.d/<service>.
+# To perform this cleanup manually for a stopped service, you can
+# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
+# rc-service <service> cgroup_cleanup.
+# rc_cgroup_cleanup="NO"

etc/rc.conf.DragonFly

@@ -1,13 +0,0 @@
-##############################################################################
-# DragonFly BSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on DragonFly BSD:
-# ""        - nothing special
-# "jail"    - DragonFly BSD jails
-# "prefix"  - Prefix
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-

etc/rc.conf.FreeBSD

@@ -1,13 +0,0 @@
-##############################################################################
-# FreeBSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on FreeBSD:
-# ""        - nothing special
-# "jail"    - FreeBSD jails
-# "prefix"  - Prefix
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-

etc/rc.conf.GNU

@@ -1,14 +0,0 @@
-##############################################################################
-# GNU/Hurd SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on GNU/Hurd:
-# ""        - nothing special
-# "subhurd" - Hurd subhurds (to be checked)
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-# This is the number of tty's used in most of the rc-scripts (like
-# consolefont, numlock, etc ...)
-#rc_tty_number=6?

etc/rc.conf.GNU-kFreeBSD

@@ -1,11 +0,0 @@
-##############################################################################
-# GNU/kFreeBSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on GNU/kFreeBSD:
-# ""        - nothing special
-# "jail"    - FreeBSD jails (not yet implemented)
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""

etc/rc.conf.Linux

@@ -1,90 +0,0 @@
-##############################################################################
-# LINUX SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on Linux:
-# ""               - nothing special
-# "docker"         - Docker container manager
-# "lxc"            - Linux Containers
-# "openvz"         - Linux OpenVZ
-# "prefix"         - Prefix
-# "rkt"            - CoreOS container management system
-# "uml"            - Usermode Linux
-# "vserver"        - Linux vserver
-# "systemd-nspawn" - Container created by the systemd-nspawn utility
-# "xen0"           - Xen0 Domain
-# "xenU"           - XenU Domain
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-
-# This is the number of tty's used in most of the rc-scripts (like
-# consolefont, numlock, etc ...)
-rc_tty_number=12
-
-##############################################################################
-# CGROUPS RESOURCE MANAGEMENT
-
-# If you have cgroups turned on in your kernel, this switch controls
-# whether or not a group for each controller is mounted under
-# /sys/fs/cgroup.
-# None of the other options in this section work if this is set to "NO".
-#rc_controller_cgroups="YES"
-
-# The following settings allow you to set up values for the cgroup
-# controllers for your services.
-# They can be set in this file;, however, if you do this, the settings
-# will apply to all of your services.
-# If you want different settings for each service, place the settings in
-# /etc/conf.d/foo for service foo.
-# The format is to specify the names of the settings followed by their
-# values. Each variable can hold multiple settings.
-# For example, you would use this to set the cpu.shares setting in the
-# cpu controller to 512 for your service.
-# rc_cgroup_cpu="
-# cpu.shares 512
-# "
-#
-#For more information about the adjustments that can be made with
-#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
-
-# Set the blkio controller settings for this service.
-#rc_cgroup_blkio=""
-
-# Set the cpu controller settings for this service.
-#rc_cgroup_cpu=""
-
-# Add this service to the cpuacct controller (any value means yes).
-#rc_cgroup_cpuacct=""
-
-# Set the cpuset controller settings for this service.
-#rc_cgroup_cpuset=""
-
-# Set the devices controller settings for this service.
-#rc_cgroup_devices=""
-
-# Set the hugetlb controller settings for this service.
-#rc_cgroup_hugetlb=""
-
-# Set the memory controller settings for this service.
-#rc_cgroup_memory=""
-
-# Set the net_cls controller settings for this service.
-#rc_cgroup_net_cls=""
-
-# Set the net_prio controller settings for this service.
-#rc_cgroup_net_prio=""
-
-# Set the pids controller settings for this service.
-#rc_cgroup_pids=""
-
-# Set this to YES if yu want all of the processes in a service's cgroup
-# killed when the service is stopped or restarted.
-# This should not be set globally because it kills all of the service's
-# child processes, and most of the time this is undesirable. Please set
-# it in /etc/conf.d/<service>.
-# To perform this cleanup manually for a stopped service, you can
-# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
-# rc-service <service> cgroup_cleanup.
-# rc_cgroup_cleanup="NO"

etc/rc.conf.NetBSD

@@ -1,14 +0,0 @@
-##############################################################################
-# NetBSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on NetBSD:
-# ""        - nothing special
-# "prefix"  - Prefix
-# "xen0"    - Xen0 Domain
-# "xenU"    - XenU Domain
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-

guide.md

@@ -0,0 +1,269 @@
+# Purpose and description
+
+OpenRC is an init system for Unixoid operating systems. It takes care of 
+startup and shutdown of the whole system, including services.
+
+It evolved out of the Gentoo "Baselayout" package which was a custom pure-shell 
+startup solution. (This was both hard to maintain and debug, and not very 
+performant)
+
+Most of the core parts are written in C99 for performance and flexibility 
+reasons, while everything else is posix sh.
+The License is 2-clause BSD
+
+Current size is about 10k LoC C, and about 4k LoC shell.
+
+OpenRC is known to work on Linux, many BSDs (FreeBSD, OpenBSD, DragonFlyBSD at 
+least) and HURD.
+
+Services are stateful (i.e. `start`; `start` will lead to "it's already started")
+
+# Startup
+
+Usually PID1 (aka. `init`) calls the OpenRC binary (`/sbin/openrc` by default).
+(The default setup assumes sysvinit for this)
+
+openrc scans the runlevels (default: `/etc/runlevels`) and builds a dependency
+graph, then starts the needed service scripts, either serialized (default) or in 
+parallel.
+
+When all the init scripts are started openrc terminates. There is no persistent 
+daemon. (Integration with tools like monit, runit or s6 can be done)
+
+# Shutdown
+
+On change to runlevel 0/6 or running `reboot`, `halt` etc., openrc stops all
+services that are started and runs the services in the `shutdown` runlevel.
+
+# Modifying Service Scripts
+
+Any service can, at any time, be started/stopped/restarted by executing 
+`rc-service someservice start`, `rc-service someservice stop`, etc.
+Another, less preferred method, is to run the service script directly,
+e.g. `/etc/init.d/service start`, `/etc/init.d/service stop`, etc.
+
+OpenRC will take care of dependencies, e.g starting apache will start network 
+first, and stopping network will stop apache first.
+
+There is a special command `zap` that makes OpenRC 'forget' that a service is
+started; this is mostly useful to reset a crashed service to stopped state 
+without invoking the (possibly broken) stop function of the service script.
+
+Calling `openrc` without any arguments will try to reset all services so
+that the current runlevel is satisfied; if you manually started apache it will be 
+stopped, and if squid died but is in the current runlevel it'll be restarted.
+
+There is a `service` helper that emulates the syntax seen on e.g. older Redhat
+and Ubuntu (`service nginx start` etc.)
+
+# Runlevels
+
+OpenRC has a concept of runlevels, similar to what sysvinit historically 
+offered. A runlevel is basically a collection of services that needs to be 
+started. Instead of random numbers they are named, and users can create their 
+own if needed. This allows, for example, to have a default runlevel with 
+"everything" enabled, and a "powersaving" runlevel where some services are 
+disabled.
+
+The `rc-status` helper will print all currently active runlevels and the state
+of init scripts in them:
+
+```
+# rc-status
+ * Caching service dependencies ... [ ok ]
+Runlevel: default
+ modules                     [  started  ]
+ lvm                         [  started  ]
+```
+
+All runlevels are represented as folders in `/etc/runlevels/` with symlinks to 
+the actual init scripts.
+
+Calling openrc with an argument (`openrc default`) will switch to that
+runlevel; this will start and stop services as needed.
+
+Managing runlevels is usually done through the `rc-update` helper, but could of 
+course be done by hand if desired.
+e.g. `rc-update add nginx default` - add nginx to the default runlevel
+Note: This will not auto-start nginx! You'd still have to trigger `rc` or run 
+the initscript by hand.
+
+FIXME: Document stacked runlevels
+
+The default startup uses the runlevels `boot`, `sysinit` and `default`, in that 
+order. Shutdown uses the `shutdown` runlevel.
+
+
+# Syntax of Service Scripts
+
+Service scripts are shell scripts. OpenRC aims at using only the standardized 
+POSIX sh subset for portability reasons. The default interpreter (build-time 
+toggle) is `/bin/sh`, so using for example mksh is not a problem.
+
+OpenRC has been tested with busybox sh, ash, dash, bash, mksh, zsh and possibly 
+others. Using busybox sh has been difficult as it replaces commands with 
+builtins that don't offer the expected features.
+
+The interpreter for initscripts is `#!/sbin/openrc-run`.
+Not using this interpreter will break the use of dependencies and is not 
+supported. (iow: if you insist on using `#!/bin/sh` you're on your own)
+
+A `depend` function declares the dependencies of this service script.
+All scripts must have start/stop/status functions, but defaults are provided.
+Extra functions can be added easily:
+
+```
+extra_commands="checkconfig"
+checkconfig() {
+	doSomething
+}
+```
+
+This exports the checkconfig function so that `/etc/init.d/someservice 
+checkconfig` will be available, and it "just" runs this function.
+
+While commands defined in `extra_commands` are always available, commands
+defined in `extra_started_commands` will only work when the service is started
+and those defined in `extra_stopped_commands` will only work when the service is
+stopped. This can be used for implementing graceful reload and similar
+behaviour.
+
+Adding a restart function will not work, this is a design decision within 
+OpenRC. Since there may be dependencies involved (e.g. network -> apache) a 
+restart function is in general not going to work. 
+restart is internally mapped to `stop()` + `start()` (plus handling dependencies).
+If a service needs to behave differently when it is being restarted vs
+started or stopped, it should test the `$RC_CMD` variable, for example:
+
+```
+[ "$RC_CMD" = restart ] && do_something
+```
+
+# The Depend Function
+
+This function declares the dependencies for a service script. This
+determines the order the service scripts start.
+
+```
+depend() {
+	need net
+	use dns logger netmount
+	want coolservice
+}
+```
+
+`need` declares a hard dependency - net always needs to be started before this 
+	service does
+
+`use` is a soft dependency - if dns, logger or netmount is in this runlevel 
+	start it before, but we don't care if it's not in this runlevel.
+	`want` is between need and use - try to start coolservice if it is
+	installed on the system, regardless of whether it is in the
+	runlevel, but we don't care if it starts.
+
+`before` declares that we need to be started before another service
+
+`after` declares that we need to be started after another service, without 
+	creating a dependency (so on calling stop the two are independent)
+
+`provide` allows multiple implementations to provide one service type, e.g.:
+	`provide cron` is set in all cron-daemons, so any one of them started 
+	satisfies a cron dependency
+
+`keyword` allows platform-specific overrides, e.g. `keyword -lxc` makes this 
+	service script a noop in lxc containers. Useful for things like keymaps, 
+	module loading etc. that are either platform-specific or not available 
+	in containers/virtualization/...
+
+FIXME: Anything missing in this list?
+
+# The Default Functions
+
+All service scripts are assumed to have the following functions:
+
+```
+start()
+stop()
+status()
+```
+
+There are default implementations in `lib/rc/sh/openrc-run.sh` - this allows very 
+compact service scripts. These functions can be overridden per service script as 
+needed.
+
+The default functions assume the following variables to be set in the service 
+script:
+
+```
+command=
+command_args=
+pidfile=
+``
+
+Thus the 'smallest' service scripts can be half a dozen lines long
+
+# The Magic of `conf.d`
+
+Most service scripts need default values. It would be fragile to
+explicitly source some arbitrary files. By convention `openrc-run` will source
+the matching file in `/etc/conf.d/` for any script in `/etc/init.d/`
+
+This allows you to set random startup-related things easily. Example:
+
+```
+conf.d/foo:
+START_OPTS="--extraparameter sausage"
+
+init.d/foo:
+start() {
+	/usr/sbin/foo-daemon ${STARTOPTS}
+}
+```
+
+The big advantage of this split is that most of the time editing of the init 
+script can be avoided.
+
+# Start-Stop-Daemon
+
+OpenRC has its own modified version of s-s-d, which is historically related and 
+mostly syntax-compatible to Debian's s-s-d, but has been rewritten from scratch.
+
+It helps with starting daemons, backgrounding, creating PID files and many 
+other convenience functions related to managing daemons.
+
+# `/etc/rc.conf`
+
+This file manages the default configuration for OpenRC, and it has examples of 
+per-service-script variables.
+
+Among these are `rc_parallel` (for parallelized startup), `rc_log` (logs all boot 
+messages to a file), and a few others.
+
+# ulimit and CGroups
+
+Setting `ulimit` and `nice` values per service can be done through the `rc_ulimit`
+variable.
+
+Under Linux, OpenRC can optionally use CGroups for process management.
+By default each service script's processes are migrated to their own CGroup.
+
+By changing certain values in the `conf.d` file limits can be enforced per 
+service. It is easy to find orphan processes of a service that persist after 
+`stop()`, but by default these will NOT be terminated.
+To change this add `rc_cgroup_cleanup="yes"` in the `conf.d` files for services 
+where you desire this functionality.
+
+# Caching
+
+For performance reasons OpenRC keeps a cache of pre-parsed initscript metadata
+(e.g. `depend`). The default location for this is `/${RC_SVCDIR}/cache`.
+
+The cache uses `mtime` to check for file staleness. Should any service script
+change it'll re-source the relevant files and update the cache
+
+# Convenience functions
+
+OpenRC has wrappers for many common output tasks in libeinfo.
+This allows to print colour-coded status notices and other things.
+To make the output consistent the bundled initscripts all use ebegin/eend to 
+print nice messages.

init.d/.gitignore

@@ -1,4 +1,5 @@
 binfmt
+modules-load
 bootmisc
 fsck
 hostname
@@ -11,7 +12,6 @@ network
 root
 savecache
 swap
-swapfiles
 sysctl
 urandom
 devfs
@@ -37,6 +37,7 @@ pf
 rarpd
 rc-enabled
 rpcbind
+runsvdir
 savecore
 swap-blk
 swclock

init.d/Makefile

@@ -2,8 +2,8 @@ include ../mk/net.mk
 
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in loopback.in \
-	netmount.in osclock.in root.in savecache.in swap.in swapfiles.in \
-	tmpfiles.setup.in swclock.in sysctl.in urandom.in s6-svscan.in ${SRCS-${OS}}
+	netmount.in osclock.in root.in savecache.in swap.in tmpfiles.setup.in  \
+	swclock.in sysctl.in runsvdir.in urandom.in s6-svscan.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
 # Are we installing our network scripts?
@@ -15,14 +15,14 @@ MK=	../mk
 include ${MK}/os.mk
 
 # Generic BSD scripts
-SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-		rpcbind.in savecore.in syslogd.in
+SRCS-FreeBSD=	hostid.in modules.in moused.in newsyslog.in pf.in rarpd.in \
+		rc-enabled.in rpcbind.in savecore.in syslogd.in
 # These are FreeBSD specific
 SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in encswap.in ipfw.in \
-		mixer.in nscd.in powerd.in syscons.in
+		modules.in modules-load.in mixer.in nscd.in powerd.in syscons.in
 
 SRCS-Linux=	binfmt.in devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
-		killprocs.in modules.in mount-ro.in mtab.in numlock.in \
+		killprocs.in modules.in modules-load.in mount-ro.in mtab.in numlock.in \
 		procfs.in net-online.in sysfs.in termencoding.in tmpfiles.dev.in
 
 # Generic BSD scripts
@@ -31,9 +31,6 @@ SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 # These are NetBSD specific
 SRCS-NetBSD+=	devdb.in swap-blk.in ttys.in wscons.in
 
-%.in: %${SFX}
-	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@
-
 include ${MK}/scripts.mk
 
 _installafter_: realinstall

init.d/binfmt.in

@@ -15,7 +15,7 @@ depend()
 {
 	after procfs
 	use modules devfs
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()

init.d/consolefont.in

@@ -15,7 +15,7 @@ depend()
 {
 	need localmount termencoding
 	after hotplug bootmisc modules
-	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
 
 start()

init.d/devfs.in

@@ -15,7 +15,7 @@ depend()
 {
 	provide dev-mount
 	before dev
-	keyword -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -lxc -prefix -systemd-nspawn -vserver
 }
 
 mount_dev()

init.d/dmesg.in

@@ -14,7 +14,7 @@ description="Set the dmesg level for a cleaner boot"
 depend()
 {
 	before dev modules
-	keyword -lxc -prefix -systemd-nspawn -vserver
+	keyword -docker -lxc -prefix -systemd-nspawn -vserver
 }
 
 start()

init.d/fsck.in

@@ -16,7 +16,7 @@ _IFS="
 depend()
 {
 	use dev clock modules
-	keyword -jail -openvz -prefix -systemd-nspawn -timeout -vserver -lxc -uml
+	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -timeout -vserver -uml
 }
 
 _abort() {

init.d/hostname.in

@@ -12,15 +12,25 @@
 description="Sets the hostname of the machine."
 
 depend() {
-	keyword -prefix -systemd-nspawn -lxc
+	keyword -docker -lxc -prefix -systemd-nspawn
 }
 
 start()
 {
-	# HOSTNAME variable used to be defined in caps in conf.d/hostname.
-	# It is also a magic variable in bash.
-	hostname=${hostname-${HOSTNAME-localhost}} # checkbashisms: false positive
-	ebegin "Setting hostname to $hostname"
-	hostname "$hostname"
+	local h source x
+	if [ -s @SYSCONFDIR@/hostname ] && [ -r @SYSCONFDIR@/hostname ]; then
+	read h x <@SYSCONFDIR@/hostname
+	source=" from @SYSCONFDIR@/hostname"
+	else
+		# HOSTNAME variable used to be defined in caps in conf.d/hostname.
+		# It is also a magic variable in bash.
+		h=${hostname-${HOSTNAME}} # checkbashisms: false positive
+	fi
+	if [ -z "$h" ]; then
+		einfo "Using default system hostname"
+		return 0
+	fi
+	ebegin "Setting hostname to $h $source"
+	hostname "$h"
 	eend $? "Failed to set the hostname"
 }

init.d/hwclock.in

@@ -30,12 +30,13 @@ fi
 depend()
 {
 	provide clock
+	want modules
 	if yesno $clock_adjfile; then
 		use root
 	else
 		before *
 	fi
-	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
 
 setupopts()
@@ -69,9 +70,28 @@ _hwclock()
 	return 1
 }
 
+get_noadjfile()
+{
+	if ! yesno $clock_adjfile; then
+		# Some implementations don't handle adjustments
+		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
+			echo --noadjfile
+		fi
+	fi
+}
+
+rtc_exists()
+{
+	local rtc=
+	for rtc in /dev/rtc /dev/rtc[0-9]*; do
+		[ -e "$rtc" ] && break
+	done
+	[ -e "$rtc" ]
+}
+
 start()
 {
-	local retval=0 errstr=""
+	local retval=0 errstr="" modname
 	setupopts
 
 	if [ -z "$utc_cmd" ]; then
@@ -81,26 +101,27 @@ start()
 
 	ebegin "Setting system clock using the hardware clock [$utc]"
 	if [ -e /proc/modules ]; then
-		local rtc=
-		for rtc in /dev/rtc /dev/rtc[0-9]*; do
-			[ -e "$rtc" ] && break
-		done
-		if [ ! -e "${rtc}" ]; then
-			modprobe -q rtc-cmos || modprobe -q rtc || modprobe -q genrtc
+		if ! rtc_exists; then
+			for x in rtc-cmos rtc genrtc; do
+				modprobe -q $x && rtc_exists && modname="$x" && break
+			done
+			[ -n "$modname" ] &&
+				ewarn "The $modname module needs to be configured in" \
+					"@SYSCONFDIR@/conf.d/modules or built in."
 		fi
 	fi
 
 	# Always set the kernel's time zone.
-	_hwclock --systz $utc_cmd $clock_args
+	_hwclock --systz $utc_cmd $(get_noadjfile) $clock_args
 	: $(( retval += $? ))
 
 	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
-		_hwclock --adjust $utc_cmd
+		_hwclock --adjust $utc_cmd $(get_noadjfile)
 		: $(( retval += $? ))
 	fi
 
 	if yesno ${clock_hctosys:-YES}; then
-		_hwclock --hctosys $utc_cmd $clock_args
+		_hwclock --hctosys $utc_cmd $(get_noadjfile) $clock_args
 		: $(( retval += $? ))
 	fi
 
@@ -122,14 +143,7 @@ stop()
 
 	ebegin "Setting hardware clock using the system clock" "[$utc]"
 
-	if ! yesno $clock_adjfile; then
-		# Some implementations don't handle adjustments
-		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
-			utc_cmd="$utc_cmd --noadjfile"
-		fi
-	fi
-
-	_hwclock --systohc $utc_cmd $clock_args
+	_hwclock --systohc $utc_cmd $(get_noadjfile) $clock_args
 	retval=$?
 
 	eend $retval "Failed to sync clocks"
@@ -144,5 +158,5 @@ save()
 show()
 {
 	setupopts
-	hwclock --show "$utc_cmd" $clock_args
+	hwclock --show "$utc_cmd" $(get_noadjfile) $clock_args
 }

init.d/keymaps.in

@@ -15,7 +15,7 @@ depend()
 {
 	need localmount termencoding
 	after bootmisc
-	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
 
 start()

init.d/killprocs.in

@@ -20,10 +20,8 @@ start()
 {
 	ebegin "Terminating remaining processes"
 	killall5 -15 ${killall5_opts}
-	sleep 1
 	eend 0
 	ebegin "Killing remaining processes"
 	killall5 -9 ${killall5_opts}
-	sleep 1
 	eend 0
 }

init.d/localmount.in

@@ -16,13 +16,13 @@ depend()
 	need fsck
 	use lvm modules mtab
 	after lvm modules
-	keyword -jail -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
 }
 
 start()
 {
 	# Mount local filesystems in /etc/fstab.
-	local types="noproc" x= no_netdev= rc=
+	local critical= types="noproc" x= no_netdev= rc=
 	for x in $net_fs_list $extra_net_fs_list; do
 		types="${types},no${x}"
 	done
@@ -37,13 +37,17 @@ start()
 	mount -at "$types" $no_netdev
 	eend $? "Some local filesystem failed to mount"
 	rc=$?
-	if [ "$RC_UNAME" != Linux ]; then
+	if [ -z "$critical_mounts" ]; then
 		rc=0
-	elif yesno "${ignore_mount_errors:-NO}"; then
-		if [ $rc -ne 0 ]; then
-			ewarn "localmount: errors detected, but ignored"
+	else
+		for x in ${critical_mounts}; do
+		fstabinfo -q $x || continue
+		if ! mountinfo -q $x; then
+			critical=x
+			eerror "Failed to mount $x"
 		fi
-		rc=0
+		done
+		[ -z "$critical" ] && rc=0
 	fi
 	return $rc
 }
@@ -95,8 +99,8 @@ stop()
 				aufs_branch=$(sed 's/=.*//g' $x)
 				eindent
 				if ! mount -o "remount,del:$aufs_branch" "$aufs_mount_point" > /dev/null 2>&1; then
-					ewarn "Failed to remove branch $aufs_branch from aufs \
-					$aufs_mount_point"
+					ewarn "Failed to remove branch $aufs_branch from aufs" \
+					"$aufs_mount_point"
 				fi
 				eoutdent
 				sync

init.d/loopback.in

@@ -21,12 +21,10 @@ start()
 	if [ "$RC_UNAME" = Linux ]; then
 		ebegin "Bringing up network interface lo"
 		if command -v ip > /dev/null 2>&1; then
-			ip addr add 127.0.0.1/8 dev lo brd + scope host
-			ip route add 127.0.0.0/8 dev lo scope host
+			ip addr add 127.0.0.1/8 dev lo brd +
 			ip link set lo up
 		else
 			ifconfig lo 127.0.0.1 netmask 255.0.0.0
-			route add -net 127.0.0.0 netmask 255.0.0.0 gw 127.0.0.1
 		fi
 	else
 		ebegin "Bringing up network interface lo0"
@@ -35,8 +33,3 @@ start()
 	fi
 	eend $?
 }
-
-stop()
-{
-	return 0
-}

init.d/modules-load.in

@@ -0,0 +1,72 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2016 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+description="Loads a list of modules from systemd-compatible locations."
+
+depend()
+{
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
+}
+
+find_modfiles()
+{
+	local dirs="/usr/lib/modules-load.d /run/modules-load.d /etc/modules-load.d"
+	local basenames files fn x y
+	for x in $dirs; do
+		[ ! -d $x ] && continue
+		for y in $x/*.conf; do
+			[ -f $y ] && basenames="${basenames}\n${y##*/}"
+		done
+	done
+	basenames=$(printf "$basenames" | sort -u)
+	for x in $basenames; do
+		for y in $dirs; do
+			[ -r $y/$x ] &&
+				fn=$y/$x
+		done
+		files="$files $fn"
+	done
+	echo $files
+}
+
+load_modules()
+{
+	local file m modules rc x
+	file=$1
+	[ -z "$file" ] && return 0
+	while read m x; do
+		case $m in
+			\;*) continue ;;
+			\#*) continue ;;
+			*) modules="$modules $m"
+			;;
+		esac
+	done < $file
+	for x in $modules; do
+		ebegin "Loading module $x"
+		case "$RC_UNAME" in
+			FreeBSD) kldload "$x"; rc=$? ;;
+			Linux) modprobe --use-blacklist -q "$x"; rc=$? ;;
+			*) ;;
+		esac
+		eend $rc "Failed to load $x"
+	done
+}
+
+start()
+{
+	local x
+	files=$(find_modfiles)
+	for x in $files; do
+		load_modules $x
+	done
+	return 0
+}

init.d/modules.in

@@ -14,10 +14,22 @@ description="Loads a user defined list of kernel modules."
 depend()
 {
 	use isapnp
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	want modules-load
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
-start()
+FreeBSD_modules()
+{
+	local cnt=0 x
+	for x in $modules; do
+		ebegin "Loading module $x"
+		kldload "$x"
+		eend $? "Failed to load $x" && : $(( cnt += 1 ))
+	done
+	einfo "Autoloaded $cnt module(s)"
+}
+
+Linux_modules()
 {
 	# Should not fail if kernel do not have module
 	# support compiled in ...
@@ -63,8 +75,17 @@ start()
 		done
 		[ -z "$args" ] && eval args=\$module_${aa}_args
 		[ -z "$args" ] && eval args=\$module_${xx}_args
-		eval modprobe -q "$mpargs" "$x" "$args"
+		eval modprobe --use-blacklist -q "$mpargs" "$x" "$args"
 		eend $? "Failed to load $x" && : $(( cnt += 1 ))
 	done
 	einfo "Autoloaded $cnt module(s)"
 }
+
+start()
+{
+	case "$RC_UNAME" in
+		FreeBSD|Linux) ${RC_UNAME}_modules ;;
+		*) ;;
+	esac
+	return 0
+}

init.d/mount-ro.in

@@ -14,7 +14,7 @@ description="Re-mount filesytems read-only for a clean reboot."
 depend()
 {
 	need killprocs savecache
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()
@@ -34,6 +34,9 @@ start()
 
 	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|/run|${rc_svcdir}" x= fs=
 	m="$m|/bin|/sbin|/lib(32|64)?|/libexec"
+	if [ -e "$rc_svcdir"/usr_premounted ]; then
+		m="$m|/usr"
+	fi
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
 	local IFS="$IFS:"
 	for x in $no_umounts $RC_NO_UMOUNTS; do

init.d/net-online.in

@@ -15,7 +15,7 @@ depend()
 {
 	after modules
 	need sysfs
-	keyword -jail -lxc -openvz -prefix -systemd-nspawn -uml -vserver
+	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -uml -vserver
 }
 
 get_interfaces()
@@ -42,8 +42,8 @@ get_default_gateway()
 
 start ()
 {
-	local carriers configured dev gateway ifcount infinite interfaces
-	local rc state timeout x
+	local carriers configured dev gateway ifcount infinite
+	local rc state x
 
 	ebegin "Checking to see if the network is online"
 	rc=0

init.d/netmount.in

@@ -24,7 +24,7 @@ depend()
 	want $mywant
 	use afc-client amd openvpn
 	use dns
-	keyword -jail -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
 }
 
 start()
@@ -37,13 +37,22 @@ start()
 	ebegin "Mounting network filesystems"
 	mount -at $fs
 	rc=$?
-	if [ "$RC_UNAME" = Linux ]; then
+	if [ "$RC_UNAME" = Linux ] && [ $rc = 0 ]; then
 		mount -a -O _netdev
 		rc=$?
 	fi
 	ewend $rc "Could not mount all network filesystems"
-	if [ "$RC_UNAME" != Linux ]; then
+	if [ -z "$critical_mounts" ]; then
 		rc=0
+	else
+		for x in ${critical_mounts}; do
+		fstabinfo -q $x || continue
+		if ! mountinfo -q $x; then
+			critical=x
+			eerror "Failed to mount $x"
+		fi
+		done
+		[ -z "$critical" ] && rc=0
 	fi
 	return $rc
 }
@@ -72,7 +81,7 @@ stop()
 	retval=$?
 
 	eoutdent
-	if [ "$RC_UNAME" = Linux ]; then
+	if [ "$RC_UNAME" = Linux ] && [ $retval = 0 ]; then
 		umount -a -O _netdev
 		retval=$?
 	fi

init.d/numlock.in

@@ -16,7 +16,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 depend()
 {
 	need localmount
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 _setleds()

init.d/procfs.in

@@ -13,16 +13,22 @@ description="Mounts misc filesystems in /proc."
 
 depend()
 {
-	use modules devfs
+	use devfs
+	want modules
 	need localmount
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()
 {
 	# Setup Kernel Support for miscellaneous Binary Formats
-	if [ -d /proc/sys/fs/binfmt_misc -a ! -e /proc/sys/fs/binfmt_misc/register ]; then
-		modprobe -q binfmt-misc
+	if [ -d /proc/sys/fs/binfmt_misc ] &&
+		[ ! -e /proc/sys/fs/binfmt_misc/register ]; then
+		if ! grep -qs binfmt_misc /proc/filesystems &&
+			modprobe -q binfmt-misc; then
+			ewarn "The binfmt-misc module needs to be configured in" \
+				"@SYSCONFDIR@/conf.d/modules or built in."
+		fi
 		if grep -qs binfmt_misc /proc/filesystems; then
 			ebegin "Mounting misc binary format filesystem"
 			mount -t binfmt_misc -o nodev,noexec,nosuid \

init.d/root.in

@@ -14,7 +14,7 @@ description="Mount the root fs read/write"
 depend()
 {
 	need fsck
-	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()

init.d/runsvdir.in

@@ -0,0 +1,20 @@
+#!@SBINDIR@/openrc-run
+# Copyright (c) 2016 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+# except according to the terms contained in the LICENSE file.
+
+command=/usr/bin/runsvdir
+command_background=yes
+pidfile=/var/run/runsvdir.pid
+command_args="-P $RC_SVCDIR/sv 'log: ...........................................................................................................................................................................................................................................................................................................................................................................................................'"
+
+start_pre()
+{
+	checkpath -m 0755 -o root:root -d ${RC_SVCDIR}/sv
+}

init.d/savecache.in

@@ -49,7 +49,7 @@ start()
 	fi
 	ebegin "Saving dependency cache"
 	local rc=0 save=
-	for x in deptree depconfig shutdowntime softlevel nettree rc.log; do
+	for x in shutdowntime softlevel rc.log; do
 		[ -e "$RC_SVCDIR/$x" ] && save="$save $RC_SVCDIR/$x"
 	done
 	if [ -n "$save" ]; then

init.d/swap.in

@@ -12,14 +12,13 @@
 depend()
 {
 	before localmount
-	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
 start()
 {
 	ebegin "Activating swap devices"
 	case "$RC_UNAME" in
-		Linux)		swapon -a -e >/dev/null;;
 		NetBSD|OpenBSD) swapctl -A -t noblk >/dev/null;;
 		*)		swapon -a >/dev/null;;
 	esac
@@ -29,12 +28,6 @@ start()
 stop()
 {
 	ebegin "Deactivating swap devices"
-
-	# Try to unmount all tmpfs filesystems not in use, else a deadlock may
-	# occur. As $RC_SVCDIR may also be tmpfs we cd to it to lock it
-	cd "$RC_SVCDIR"
-	umount -a -t tmpfs 2>/dev/null
-
 	case "$RC_UNAME" in
 		NetBSD|OpenBSD)	swapctl -U -t noblk >/dev/null;;
 		*)		swapoff -a >/dev/null;;

init.d/swapfiles.in

@@ -1,46 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-depend()
-{
-	need localmount
-	keyword -jail -openvz -prefix -systemd-nspawn -vserver -lxc
-}
-
-start()
-{
-	ebegin "Activating additional swap space"
-	case "$RC_UNAME" in
-		NetBSD|OpenBSD) swapctl -A -t noblk >/dev/null;;
-		*)		swapon -a >/dev/null;;
-	esac
-	eend 0 # If swapon has nothing todo it errors, so always return 0
-}
-
-stop()
-{
-	ebegin "Deactivating additional swap space"
-	case "$RC_UNAME" in
-		Linux)
-			if [ -e /proc/swaps ]; then
-				while read filename type rest; do
-					case "$type" in
-						file) swapoff $filename >/dev/null;;
-					esac
-					case "$filename" in
-						/dev/loop*) swapoff $filename >/dev/null;;
-					esac
-				done < /proc/swaps
-			fi
-			;;
-	esac
-	eend 0
-}

init.d/swclock.in

@@ -15,7 +15,7 @@ depend()
 {
 	before *
 	provide clock
-	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 }
 
 # swclock is an OpenRC built in

init.d/sysctl.BSD.in

@@ -1,38 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-depend()
-{
-	before bootmisc logger
-	keyword -prefix
-}
-
-start()
-{
-	[ -e /etc/sysctl.conf ] || return 0
-	local retval=0 var= comments= conf=
-	ebegin "Configuring kernel parameters"
-	eindent
-	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
-		if [ -r "$conf" ]; then
-			vebegin "applying $conf"
-			while read var comments; do
-				case "$var" in
-				""|"#"*) continue;;
-				esac
-				sysctl -w "$var" >/dev/null || retval=1
-			done < "$conf"
-			veend $retval
-		fi
-	done
-	eoutdent
-	eend $retval "Some errors were encountered"
-}

init.d/sysctl.GNU.in

@@ -1,39 +0,0 @@
-#!@PREFIX@/sbin/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-#FIXME: Modify for GNU/Hurd
-
-depend()
-{
-	before bootmisc logger
-	keyword -prefix
-}
-
-start()
-{
-	[ -e /etc/sysctl.conf ] || return 0
-	local retval=0 var= comments= conf=
-	ebegin "Configuring kernel parameters"
-	eindent
-	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
-		if [ -r "$conf" ]; then
-			vebegin "applying $conf"
-			while read var comments; do
-				case "$var" in
-				""|"#"*) continue;;
-				esac
-				sysctl -w "$var" >/dev/null || retval=1
-			done < "$conf"
-			veend $retval
-		fi
-	done
-	eoutdent
-	eend $retval "Some errors were encountered"
-}

init.d/sysctl.Linux.in

@@ -1,26 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-depend()
-{
-	before bootmisc logger
-	keyword -prefix -systemd-nspawn -vserver
-}
-
-start()
-{
-	local quiet
-	yesno $rc_verbose || quiet=-q
-
-	ebegin "Configuring kernel parameters"
-	sysctl ${quiet} --system
-	eend $? "Unable to configure some kernel parameters"
-}

init.d/sysctl.in

@@ -12,14 +12,13 @@
 depend()
 {
 	before bootmisc logger
-	keyword -prefix
+	keyword -prefix -systemd-nspawn -vserver
 }
 
-start()
+BSD_sysctl()
 {
 	[ -e /etc/sysctl.conf ] || return 0
 	local retval=0 var= comments= conf=
-	ebegin "Configuring kernel parameters"
 	eindent
 	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
 		if [ -r "$conf" ]; then
@@ -34,5 +33,25 @@ start()
 		fi
 	done
 	eoutdent
-	eend $retval "Some errors were encountered"
+	return $retval
+}
+
+Linux_sysctl()
+{
+	local quiet
+	yesno $rc_verbose || quiet=-q
+
+	sysctl ${quiet} --system
+}
+
+start()
+{
+	local rc=0
+
+	ebegin "Configuring kernel parameters"
+	case "$RC_UNAME" in
+	*BSD|GNU) BSD_sysctl; rc=$? ;;
+	Linux) Linux_sysctl; rc=$? ;;
+	esac
+	eend $rc "Unable to configure some kernel parameters"
 }

init.d/sysfs.in

@@ -15,7 +15,8 @@ sysfs_opts=nodev,noexec,nosuid
 
 depend()
 {
-	keyword -lxc -prefix -systemd-nspawn -vserver
+	want modules
+	keyword -docker -lxc -prefix -systemd-nspawn -vserver
 }
 
 mount_sys()
@@ -88,19 +89,34 @@ mount_misc()
 		fi
 	fi
 
-	# setup up kernel support for efivarfs
-	# slightly complicated, as if it's build as a module but NOT yet loaded,
-	# it will NOT appear in /proc/filesystems yet
-	if [ -d /sys/firmware/efi/efivars ] \
-		&& ! mountinfo -q /sys/firmware/efi/efivars; then
-		modprobe -q efivarfs
-		if grep -qs efivarfs /proc/filesystems; then
-			ebegin "Mounting efivarfs filesystem"
-			mount -n -t efivarfs -o ${sysfs_opts} \
-				efivarfs /sys/firmware/efi/efivars
+	# Setup Kernel Support for persistent storage
+	if [ -d /sys/fs/pstore ] && ! mountinfo -q /sys/fs/pstore; then
+		if grep -qs 'pstore$' /proc/filesystems; then
+			ebegin "Mounting persistent storage (pstore) filesystem"
+			mount -t pstore pstore -o ${sysfs_opts} /sys/fs/pstore
 			eend $?
 		fi
 	fi
+
+	# set up kernel support for efivarfs
+	# The presence of /sys/firmware/efi indicates that the system was
+	# booted in efi mode.
+	if [ -d /sys/firmware/efi ]; then
+		if [ ! -d /sys/firmware/efi/efivars ] &&
+			modprobe -q efivarfs; then
+			ewarn "The efivarfs module needs to be configured in " \
+				  "@SYSCONFDIR@/conf.d/modules or built in"
+		fi
+		if [ -d /sys/firmware/efi/efivars ] &&
+			! mountinfo -q /sys/firmware/efi/efivars; then
+			if grep -qs efivarfs /proc/filesystems; then
+				ebegin "Mounting efivarfs filesystem"
+				mount -n -t efivarfs -o ${sysfs_opts} \
+					efivarfs /sys/firmware/efi/efivars
+				eend $?
+			fi
+		fi
+	fi
 }
 
 mount_cgroups()

init.d/termencoding.in

@@ -16,7 +16,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 
 depend()
 {
-	keyword -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
 	use root
 	after bootmisc
 }

init.d/urandom.in

@@ -15,7 +15,7 @@ description="Initializes the random number generator."
 depend()
 {
 	need localmount
-	keyword -jail -lxc -openvz -prefix -systemd-nspawn
+	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn
 }
 
 save_seed()

local.d/README

@@ -8,7 +8,7 @@ service is stopped.
 
 All files are processed in lexical order.
 
-Keep in mind that files in this directory are processed sequencially,
+Keep in mind that files in this directory are processed sequentially,
 and the local service is not considered started or stopped until
 everything is processed, so if you have a process which takes a long
 time to run, it can delay your boot or shutdown processing.

man/Makefile

@@ -6,7 +6,7 @@ MAN3=		einfo.3 \
 		rc_config.3 rc_deptree.3 rc_find_pids.3 rc_plugin_hook.3 \
 		rc_runlevel.3 rc_service.3 rc_stringlist.3
 MAN8=		rc-service.8 rc-status.8 rc-update.8 openrc.8 openrc-run.8 \
-		service.8 start-stop-daemon.8
+		service.8 start-stop-daemon.8 supervise-daemon.8
 
 ifeq (${OS},Linux)
 MAN8 += rc-sstat.8

man/openrc-run.8

@@ -95,10 +95,17 @@ String describing the service.
 .It Ar description_$command
 String describing the extra command.
 .It Ar supervisor
-Supervisor to use to monitor this daemon. If this is unset,
-start-stop-daemon will be used. The only alternate supervisor we support
-in this release is S6 from Skarnet software. To use this, set
+Supervisor to use to monitor this daemon. If this is unset or invalid,
+start-stop-daemon will be used.
+Currently, we support s6 from scarnet software, and supervise-daemon
+which is a light-weight supervisor internal to OpenRC.
+To use s6, set
 supervisor=s6.
+or set
+supervisor=supervise-daemon
+to use supervise-daemon.
+Note that supervise-daemon is still in early development, so it is
+considered experimental.
 .It Ar s6_service_path
 The path to the s6 service directory if you are monitoring this service
 with S6. The default is /var/svc.d/${RC_SVCNAME}.
@@ -112,22 +119,52 @@ List of arguments passed to start-stop-daemon when starting the daemon.
 .It Ar command
 Daemon to start or stop via
 .Nm start-stop-daemon
+or
+.Nm supervise-daemon
 if no start or stop function is defined by the service.
 .It Ar command_args
 List of arguments to pass to the daemon when starting via
 .Nm start-stop-daemon .
-.It Ar command_background
-Set this to "true", "yes" or "1" (case-insensitive) to force the daemon into
-the background. This implies the "--make-pidfile" and "--pidfile" option of
+.It Ar command_args_background
+This variable should be used if the daemon you are starting with
 .Xr start-stop-daemon 8
-so the pidfile variable must be set.
+runs in the foreground by default but has its own command line options
+to request that it background and write a pid file. It should be set to
+those options. It should not be used at the same time as
+command_background, because command_background requests that
+.Xr start-stop-daemon 8
+go into the background before executing the daemon.
+.It Ar command_args_foreground
+List of arguments to pass to the daemon when starting via
+.Nm supervise-daemon .
+to force the daemon to stay in the foreground
+.It Ar command_background
+Set this to "true", "yes" or "1" (case-insensitive) if you want 
+.Xr start-stop-daemon 8
+to force the daemon into the background. This forces the
+"--make-pidfile" and "--pidfile" options, so the pidfile variable must be set.
+.It Ar command_progress
+Set this to "true", "yes" or "1" (case-insensitive) if you want 
+.Xr start-stop-daemon 8
+to display a progress meter when waiting for a daemon to stop.
+.It Ar command_user
+If the daemon does not support changing to a different user id, you can
+use this to change the user id before
+.Xr start-stop-daemon 8
+or
+.Xr supervise-daemon 8
+launches the daemon
 .It Ar chroot
 .Xr start-stop-daemon 8
+and
+.Xr supervise-daemon 8
 will chroot into this path before writing the pid file or starting the daemon.
 .It Ar pidfile
 Pidfile to use for the above defined command.
 .It Ar name
 Display name used for the above defined command.
+.It Ar procname
+Process name to match when signaling the daemon.
 .It Ar stopsig
 Signal to send when stopping the daemon.
 .It Ar retry
@@ -143,6 +180,10 @@ used along with in_background_fake to support re-entrant services.
 .It Ar in_background_fake
 Space separated list of commands which should always succeed when
 in_background is yes.
+.Pp
+Keep in mind that eval is used to process chroot, command, command_args_*,
+command_user, pidfile and procname. This may affect how they are
+evaluated depending on how they are quoted.
 .El
 .Sh DEPENDENCIES
 You should define a

man/rc-service.8

@@ -20,6 +20,14 @@
 .Ar service cmd
 .Op Ar ...
 .Nm
+.Op Fl I , -ifinactive
+.Ar service cmd
+.Op Ar ...
+.Nm
+.Op Fl N , -ifnotstarted
+.Ar service cmd
+.Op Ar ...
+.Nm
 .Fl e , -exists
 .Ar service
 .Nm
@@ -36,6 +44,13 @@ If
 is given then
 .Nm
 returns 0 even if the service does not exist.
+If
+.Fl I , -ifinactive
+or
+.Fl N , -ifnotstarted
+is given then
+.Nm
+returns 0 if the service exists but is in the wrong state.
 .Pp
 If given the
 .Fl l , -list

man/rc-status.8

@@ -33,6 +33,8 @@ Show all runlevels and their services.
 List all services that have crashed.
 .It Fl l , -list
 List all defined runlevels.
+.It Fl m , -manual
+Show all manually started services.
 .It Fl r , -runlevel
 Print the current runlevel name.
 .It Fl s , -servicelist

man/start-stop-daemon.8

@@ -153,6 +153,10 @@ The retry specification can be either a timeout in seconds or multiple
 signal/timeout pairs (like SIGTERM/5).
 .El
 .Sh ENVIRONMENT
+.Va SSD_IONICELEVEL
+can also set the IO scheduling priority of the daemon, but the command line
+option takes precedence.
+.Pp
 .Va SSD_NICELEVEL
 can also set the scheduling priority of the daemon, but the command line
 option takes precedence.

man/supervise-daemon.8

@@ -0,0 +1,142 @@
+.\" Copyright (c) 2007-2015 The OpenRC Authors.
+.\" See the Authors file at the top-level directory of this distribution and
+.\" https://github.com/OpenRC/openrc/blob/master/AUTHORS
+.\"
+.\" This file is part of OpenRC. It is subject to the license terms in
+.\" the LICENSE file found in the top-level directory of this
+.\" distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+.\" This file may not be copied, modified, propagated, or distributed
+.\"    except according to the terms contained in the LICENSE file.
+.\"
+.Dd April 27, 2016
+.Dt supervise-DAEMON 8 SMM
+.Os OpenRC
+.Sh NAME
+.Nm supervise-daemon
+.Nd starts a daemon and restarts it if it crashes
+.Sh SYNOPSIS
+.Nm
+.Fl d , -chdir
+.Ar path
+.Fl e , -env
+.Ar var=value
+.Fl g , -group
+.Ar group
+.Fl I , -ionice
+.Ar arg
+.Fl k , -umask
+.Ar value
+.Fl N , -nicelevel
+.Ar level
+.Fl p , -pidfile
+.Ar pidfile
+.Fl u , -user
+.Ar user
+.Fl r , -chroot
+.Ar chrootpath
+.Fl 1 , -stdout
+.Ar logfile
+.Fl 2 , -stderr
+.Ar logfile
+.Fl S , -start
+.Ar daemon
+.Op Fl -
+.Op Ar arguments
+.Nm
+.Fl K , -stop
+.Ar daemon
+.Fl p , -pidfile
+.Ar pidfile
+.Fl r , -chroot
+.Ar chrootpath
+.Sh DESCRIPTION
+.Nm
+provides a consistent method of starting, stopping and restarting
+daemons. If
+.Fl K , -stop
+is not provided, then we assume we are starting the daemon.
+.Nm
+only works with daemons which do not fork. Also, it uses its own pid
+file, so the daemon should not write a pid file, or the pid file passed
+to 
+.Nm
+should not be the one the daemon writes.
+.Pp
+Here are the options to specify the daemon and how it should start or stop:
+.Bl -tag -width indent
+.It Fl p , -pidfile Ar pidfile
+When starting, we write a
+.Ar pidfile
+so we know which supervisor to stop.  When stopping we only stop the pid(s)
+listed in the
+.Ar pidfile .
+.It Fl u , -user Ar user Ns Op : Ns Ar group
+Start the daemon as the
+.Ar user
+and update $HOME accordingly or stop daemons
+owned by the user. You can optionally append a
+.Ar group
+name here also.
+.It Fl v , -verbose
+Print the action(s) that are taken just before doing them.
+.Pp
+The options are as follows:
+.Bl -tag -width indent
+.It Fl d , -chdir Ar path
+chdir to this directory before starting the daemon.
+.It Fl e , -env Ar VAR=VALUE
+Set the environment variable VAR to VALUE.
+.It Fl g , -group Ar group
+Start the daemon as in the group.
+.It Fl I , -ionice Ar class Ns Op : Ns Ar data
+Modifies the IO scheduling priority of the daemon.
+Class can be 0 for none, 1 for real time, 2 for best effort and 3 for idle.
+Data can be from 0 to 7 inclusive.
+.It Fl k , -umask Ar mode
+Set the umask of the daemon.
+.It Fl N , -nicelevel Ar level
+Modifies the scheduling priority of the daemon.
+.It Fl r , -chroot Ar path
+chroot to this directory before starting the daemon. All other paths, such
+as the path to the daemon, chdir and pidfile, should be relative to the chroot.
+.It Fl u , -user Ar user
+Start the daemon as the specified user.
+.It Fl 1 , -stdout Ar logfile
+Redirect the standard output of the process to logfile.
+Must be an absolute pathname, but relative to the path optionally given with
+.Fl r , -chroot .
+The logfile can also be a named pipe.
+.It Fl 2 , -stderr Ar logfile
+The same thing as
+.Fl 1 , -stdout
+but with the standard error output.
+.El
+.Sh ENVIRONMENT
+.Va SSD_NICELEVEL
+can also set the scheduling priority of the daemon, but the command line
+option takes precedence.
+.Sh NOTE
+.Nm
+uses
+.Xr getopt 3
+to parse its options, which allows it to accept the `--' option which will
+cause it to stop processing options at that point. Any subsequent arguments
+are passed as arguments to the daemon to start and used when finding a daemon
+to stop or signal.
+.Sh SEE ALSO
+.Xr chdir 2 ,
+.Xr chroot 2 ,
+.Xr getopt 3 ,
+.Xr nice 2 ,
+.Xr rc_find_pids 3
+.Sh BUGS
+.Nm
+cannot stop an interpreted daemon that no longer exists without a pidfile.
+.Sh HISTORY
+.Nm
+first appeared in Debian.
+.Pp
+This is a complete re-implementation with the process finding code in the
+OpenRC library (librc, -lrc) so other programs can make use of it.
+.Sh AUTHORS
+.An William Hubbs <w.d.hubbs@gmail.com>

mk/dist.mk

@@ -11,9 +11,9 @@
 
 GITREF?=	${VERSION}
 DISTPREFIX?=	${NAME}-${VERSION}
-DISTFILE?=	${DISTPREFIX}.tar.bz2
+DISTFILE?=	${DISTPREFIX}.tar.gz
 
-CLEANFILES+=	${NAME}-*.tar.bz2
+CLEANFILES+=	${NAME}-*.tar.gz
 
 CHANGELOG_LIMIT?= --after="1 year ago"
 
@@ -21,13 +21,13 @@ _SNAP_SH=	date -u +%Y%m%d%H%M
 _SNAP:=		$(shell ${_SNAP_SH})
 SNAP=		${_SNAP}
 SNAPDIR=	${DISTPREFIX}-${SNAP}
-SNAPFILE=	${SNAPDIR}.tar.bz2
+SNAPFILE=	${SNAPDIR}.tar.gz
 
 changelog:
 	git log ${CHANGELOG_LIMIT} --format=full > ChangeLog
 
 dist:
-	git archive --prefix=${DISTPREFIX}/ ${GITREF} | bzip2 > ${DISTFILE}
+	git archive --prefix=${DISTPREFIX}/ ${GITREF} --output=${DISTFILE}
 
 distcheck: dist
 	rm -rf ${DISTPREFIX}
@@ -42,7 +42,7 @@ snapshot:
 	cp -RPp * /tmp/${SNAPDIR}
 	(cd /tmp/${SNAPDIR}; make clean)
 	rm -rf /tmp/${SNAPDIR}/.git 2>/dev/null || true
-	tar -cvjpf ${SNAPFILE} -C /tmp ${SNAPDIR}
+	tar -cvzpf ${SNAPFILE} -C /tmp ${SNAPDIR}
 	rm -rf /tmp/${SNAPDIR}
 	ls -l ${SNAPFILE}
 

mk/os-prefix.mk

@@ -3,4 +3,6 @@
 
 ifeq (${MKPREFIX},yes)
 CPPFLAGS+=	-DPREFIX
+PKG_PREFIX?=	$(PREFIX)/usr
+SED_EXTRA=	-e '/_PATH=.*usr.bin/d'
 endif

mk/os.mk

@@ -13,7 +13,7 @@
 _OS_SH=		uname -s | tr '/' '-'
 _OS:= 		$(shell ${_OS_SH})
 OS?= 		${_OS}
-include ${MK}/os-${OS}.mk
 include ${MK}/os-prefix.mk
+include ${MK}/os-${OS}.mk
 
 RC_LIB=		/$(LIBNAME)/rc

mk/sys.mk

@@ -11,6 +11,7 @@
 
 AR?=			ar
 CP?=			cp
+PKG_CONFIG?=	pkg-config
 ECHO?=			echo
 INSTALL?=		install
 RANLIB?=		ranlib
@@ -26,7 +27,7 @@ ifeq (${MKPREFIX},yes)
 UPREFIX= ${PREFIX}/usr
 endif
 endif
-LOCAL_PREFIX=		/usr/local
+LOCAL_PREFIX=		$(UPREFIX)/local
 
 PICFLAG?=		-fPIC
 

mk/termcap.mk

@@ -1,6 +1,6 @@
 ifeq (${MKTERMCAP},ncurses)
-TERMCAP_CFLAGS:=	$(shell pkg-config ncurses --cflags 2> /dev/null)
-LTERMCAP:=			$(shell pkg-config ncurses --libs 2> /dev/null)
+TERMCAP_CFLAGS:=	$(shell ${PKG_CONFIG} ncurses --cflags 2> /dev/null)
+LTERMCAP:=			$(shell ${PKG_CONFIG} ncurses --libs 2> /dev/null)
 ifeq ($(LTERMCAP),)
 LIBTERMCAP?=	-lncurses
 else

runit-guide.md

@@ -0,0 +1,41 @@
+# Using runit with OpenRC
+
+Beginning with OpenRC-0.21, we support using runit [1] in place of
+start-stop-daemon for monitoring and restarting daemons.
+
+## Setup
+
+Documenting runit in detail is beyond the scope of this guide. It will
+document how to set up OpenRC services to communicate with runit.
+
+### Use Default start, stop and status functions
+
+If you write your own start, stop and status functions in your service
+script, none of this will work. You must allow OpenRC to use the default
+functions.
+
+### Dependencies
+
+All OpenRC service scripts that want their daemons monitored by runit
+should have the following line added to their dependencies to make sure
+the runit scan directory is being monitored.
+
+need runsvdir
+
+### Variable Settings
+
+The most important setting is the supervisor variable. At the top of
+your service script, you should set this variable as follows:
+
+supervisor=runit
+
+The second variable you need is runit_service. This is the path to the
+runit service you wish to control via OpenRC. The default is
+/etc/sv/${RC_SVCNAME}. This means that for an OpenRC service
+/etc/init.d/foo, you will need to create the same runit service in
+/etc/sv/foo.
+
+This is very early support, so feel free to file bugs if you have
+issues.
+
+[1] http://www.smarden.org/runit

runlevels/Makefile

@@ -1,8 +1,9 @@
 include ../mk/net.mk
 
 BOOT=		bootmisc fsck hostname localmount loopback \
-		root swap swapfiles sysctl urandom ${BOOT-${OS}}
+		root swap sysctl urandom ${BOOT-${OS}}
 DEFAULT=	local netmount
+NONETWORK=	local
 SHUTDOWN=	savecache ${SHUTDOWN-${OS}}
 SYSINIT=	${SYSINIT-${OS}}
 
@@ -10,6 +11,7 @@ LEVELDIR=	${DESTDIR}/${SYSCONFDIR}/runlevels
 SYSINITDIR=	${LEVELDIR}/sysinit
 BOOTDIR=	${LEVELDIR}/boot
 DEFAULTDIR=	${LEVELDIR}/default
+NONETWORKDIR=	${LEVELDIR}/nonetwork
 SHUTDOWNDIR=	${LEVELDIR}/shutdown
 
 ifeq (${MKNET},yes)
@@ -30,7 +32,7 @@ SYSINIT-${OS}=
 BOOT-BSD=	hostid newsyslog savecore syslogd swap-blk
 
 # Generic BSD stuff
-BOOT-FreeBSD+=	hostid newsyslog savecore syslogd
+BOOT-FreeBSD+=	hostid modules newsyslog savecore syslogd
 # FreeBSD specific stuff
 BOOT-FreeBSD+=	adjkerntz dumpon syscons
 
@@ -72,6 +74,14 @@ install:
 			fi; \
 			ln -snf ${INITDIR}/"$$x" ${DEFAULTDIR}/"$$x" || exit $$?; done \
 	fi
+	if ! test -d "${NONETWORKDIR}"; then \
+		${INSTALL} -d ${NONETWORKDIR} || exit $$?; \
+		for x in ${NONETWORK}; do \
+			if test "${MKPREFIX}" = yes; then \
+				grep -q "keyword .*-prefix" ${INITFILES}/"$$x" && continue; \
+			fi; \
+			ln -snf ${INITDIR}/"$$x" ${NONETWORKDIR}/"$$x" || exit $$?; done \
+	fi
 	if ! test -d "${SHUTDOWNDIR}"; then \
 		${INSTALL} -d ${SHUTDOWNDIR} || exit $$?; \
 		for x in ${SHUTDOWN}; do \

s6-guide.md

@@ -1,7 +1,7 @@
 # Using S6 with OpenRC
 
 Beginning with OpenRC-0.16, we support using the s6 supervision suite
-from Skarmet Software in place of start-stop-daemon for monitoring
+from Skarnet Software in place of start-stop-daemon for monitoring
 daemons [1].
 
 ## Setup

sh/Makefile

@@ -1,7 +1,8 @@
 DIR=	${LIBEXECDIR}/sh
 SRCS=	init.sh.in functions.sh.in gendepends.sh.in \
 	openrc-run.sh.in rc-functions.sh.in tmpfiles.sh.in ${SRCS-${OS}}
-INC=	rc-mount.sh functions.sh rc-functions.sh s6.sh start-stop-daemon.sh
+INC=	rc-mount.sh functions.sh rc-functions.sh runit.sh s6.sh \
+		start-stop-daemon.sh supervise-daemon.sh
 BIN=	gendepends.sh init.sh openrc-run.sh tmpfiles.sh ${BIN-${OS}}
 
 INSTALLAFTER=	_installafter

sh/binfmt.sh.in

@@ -22,7 +22,7 @@ apply_file() {
 
 	### FILE FORMAT ###
 	# See https://www.kernel.org/doc/Documentation/binfmt_misc.txt
-	while read line; do
+	while read -r line; do
 		LINENUM=$(( LINENUM+1 ))
 		case $line in
 			\#*) continue ;;

sh/init.sh.BSD.in

@@ -57,7 +57,7 @@ case "$(openrc --sys)" in
 esac
 retval=$?
 
-if [ -e "$RC_LIBEXECDIR"/cache/deptree ]; then
+if [ -e "$RC_LIBEXECDIR"/cache/softlevel ]; then
 	cp -p "$RC_LIBEXECDIR"/cache/* "$RC_SVCDIR" 2>/dev/null
 fi
 

sh/init.sh.GNU-kFreeBSD.in

@@ -34,7 +34,7 @@ ebegin "Creating $RC_SVCDIR"
 mkdir -p $RC_SVCDIR
 eend $?
 
-if [ -e "$RC_LIBEXECDIR"/cache/deptree ]; then
+if [ -e "$RC_LIBEXECDIR"/cache/softlevel ]; then
     cp -p "$RC_LIBEXECDIR"/cache/* "$RC_SVCDIR" 2>/dev/null
 fi
 

sh/init.sh.GNU.in

@@ -36,7 +36,7 @@ ebegin "Creating $RC_SVCDIR"
 mkdir -p $RC_SVCDIR
 eend $?
 
-if [ -e "$RC_LIBEXECDIR"/cache/deptree ]; then
+if [ -e "$RC_LIBEXECDIR"/cache/softlevel ]; then
     cp -p "$RC_LIBEXECDIR"/cache/* "$RC_SVCDIR" 2>/dev/null
 fi
 

sh/init.sh.Linux.in

@@ -21,7 +21,7 @@ fi
 mountproc=true
 f=/proc/self/environ
 if [ -e $f ]; then
-	if [ "$(VAR=a cat $f)" = "$(VAR=b cat $f)" ]; then
+	if [ "$(VAR=a md5sum $f)" = "$(VAR=b md5sum $f)" ]; then
 		eerror "You have cruft in /proc that should be deleted"
 	else
 		einfo "/proc is already mounted"
@@ -85,7 +85,7 @@ if grep -Eq "[[:space:]]+xenfs$" /proc/filesystems; then
 	eend $?
 fi
 
-if [ -e "$RC_LIBEXECDIR"/cache/deptree ]; then
+if [ -e "$RC_LIBEXECDIR"/cache/softlevel ]; then
 	cp -p "$RC_LIBEXECDIR"/cache/* "$RC_SVCDIR" 2>/dev/null
 fi
 

sh/openrc-run.sh.in

@@ -153,7 +153,9 @@ start()
 {
 	local func=ssd_start
 	case "$supervisor" in
+		runit) func=runit_start ;;
 		s6) func=s6_start ;;
+		supervise-daemon) func=supervise_start ;;
 		?*)
 			ewarn "Invalid supervisor, \"$supervisor\", using start-stop-daemon"
 			;;
@@ -165,7 +167,9 @@ stop()
 {
 	local func=ssd_stop
 	case "$supervisor" in
+		runit) func=runit_stop ;;
 		s6) func=s6_stop ;;
+		supervise-daemon) func=supervise_stop ;;
 		?*)
 			ewarn "Invalid supervisor, \"$supervisor\", using start-stop-daemon"
 			;;
@@ -177,7 +181,9 @@ status()
 {
 	local func=ssd_status
 	case "$supervisor" in
+		runit) func=runit_status ;;
 		s6) func=s6_status ;;
+		supervise-daemon) func=supervise_status ;;
 		?*)
 			ewarn "Invalid supervisor, \"$supervisor\", using start-stop-daemon"
 			;;
@@ -187,6 +193,15 @@ status()
 
 yesno $RC_DEBUG && set -x
 
+# Load configuration settings. First the global ones, then any
+# service-specific settings.
+sourcex -e "@SYSCONFDIR@/rc.conf"
+if [ -d "@SYSCONFDIR@/rc.conf.d" ]; then
+	for _f in "@SYSCONFDIR@"/rc.conf.d/*.conf; do
+		sourcex -e "$_f"
+	done
+fi
+
 _conf_d=${RC_SERVICE%/*}/../conf.d
 # If we're net.eth0 or openvpn.work then load net or openvpn config
 _c=${RC_SVCNAME%%.*}
@@ -203,18 +218,11 @@ if ! sourcex -e "$_conf_d/$RC_SVCNAME.$RC_RUNLEVEL"; then
 fi
 unset _conf_d
 
-# Load any system overrides
-sourcex -e "@SYSCONFDIR@/rc.conf"
-if [ -d "@SYSCONFDIR@/rc.conf.d" ]; then
-	for _f in "@SYSCONFDIR@"/rc.conf.d/*.conf; do
-		sourcex -e "$_f"
-	done
-fi
-
-
 # load service supervisor functions
+sourcex "@LIBEXECDIR@/sh/runit.sh"
 sourcex "@LIBEXECDIR@/sh/s6.sh"
 sourcex "@LIBEXECDIR@/sh/start-stop-daemon.sh"
+sourcex "@LIBEXECDIR@/sh/supervise-daemon.sh"
 
 # Set verbose mode
 if yesno "${rc_verbose:-$RC_VERBOSE}"; then

sh/rc-cgroup.sh.in

@@ -53,7 +53,7 @@ cgroup_set_values()
 	while [ -n "$1" -a "$controller" != "cpuacct" ]; do
 		case "$1" in
 			$controller.*)
-				if [ -n "$name" -a -f "$cgroup/$name" -a -n "$val" ]; then
+				if [ -n "$name" -a -w "$cgroup/$name" -a -n "$val" ]; then
 					veinfo "$RC_SVCNAME: Setting $cgroup/$name to $val"
 					printf "%s" "$val" > "$cgroup/$name"
 				fi
@@ -68,12 +68,12 @@ cgroup_set_values()
 		esac
 		shift
 	done
-	if [ -n "$name" -a -f "$cgroup/$name" -a -n "$val" ]; then
+	if [ -n "$name" -a -w "$cgroup/$name" -a -n "$val" ]; then
 		veinfo "$RC_SVCNAME: Setting $cgroup/$name to $val"
 		printf "%s" "$val" > "$cgroup/$name"
 	fi
 
-	if [ -f "$cgroup/tasks" ]; then
+	if [ -w "$cgroup/tasks" ]; then
 		veinfo "$RC_SVCNAME: adding to $cgroup/tasks"
 		printf "%d" 0 > "$cgroup/tasks"
 	fi
@@ -88,14 +88,14 @@ cgroup_add_service()
     # cgroups. But may lead to a problems where that inheriting
     # is needed.
 	for d in /sys/fs/cgroup/* ; do
-		[ -f "${d}"/tasks ] && printf "%d" 0 > "${d}"/tasks
+		[ -w "${d}"/tasks ] && printf "%d" 0 > "${d}"/tasks
 	done
 
 	openrc_cgroup=/sys/fs/cgroup/openrc
 	if [ -d "$openrc_cgroup" ]; then
 		cgroup="$openrc_cgroup/$RC_SVCNAME"
 		mkdir -p "$cgroup"
-		[ -f "$cgroup/tasks" ] && printf "%d" 0 > "$cgroup/tasks"
+		[ -w "$cgroup/tasks" ] && printf "%d" 0 > "$cgroup/tasks"
 	fi
 }
 

sh/runit.sh

@@ -0,0 +1,52 @@
+# Copyright (c) 2016 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+#    except according to the terms contained in the LICENSE file.
+# Released under the 2-clause BSD license.
+
+runit_start()
+{
+	local service_path service_link
+	service_path="${runit_service:-/etc/sv/${RC_SVCNAME}}"
+	if [ ! -d "${service_path}" ]; then
+		eerror "Runit service ${service_path} not found"
+		return 1
+	fi
+	service_link="${RC_SVCDIR}/sv/${service_path##*/}"
+	ebegin "Starting ${name:-$RC_SVCNAME}"
+	ln -snf "${service_path}" "${service_link}"
+	sv start "${service_link}" > /dev/null 2>&1
+	eend $? "Failed to start ${name:-$RC_SVCNAME}"
+}
+
+runit_stop()
+{
+	local service_path service_link
+	service_path="${runit_service:-/etc/sv/${RC_SVCNAME}}"
+	if [ ! -d "${service_path}" ]; then
+		eerror "Runit service ${service_path} not found"
+		return 1
+	fi
+	service_link="${RC_SVCDIR}/sv/${service_path##*/}"
+	ebegin "Stopping ${name:-$RC_SVCNAME}"
+	sv stop "${service_link}" > /dev/null 2>&1 &&
+	rm "${service_link}"
+	eend $? "Failed to stop ${name:-$RC_SVCNAME}"
+}
+
+runit_status()
+{
+	local service_path service_link
+	service_path="${runit_service:-/etc/sv/${RC_SVCNAME}}"
+	if [ ! -d "${service_path}" ]; then
+		eerror "Runit service ${service_path} not found"
+		return 1
+	fi
+	service_link="${RC_SVCDIR}/sv/${service_path##*/}"
+	sv status "${service_link}"
+}

sh/s6.sh

@@ -30,7 +30,7 @@ s6_start()
 	sleep 1.5
 	set -- $(s6-svstat "${s6_service_link}")
 	[ "$1" = "up" ]
-	eend $? "Failed to start $RC_SVCNAME"
+	eend $? "Failed to start ${name:-$RC_SVCNAME}"
 }
 
 s6_stop()
@@ -44,7 +44,7 @@ s6_stop()
 	s6-svc -wD -d -T ${s6_service_timeout_stop:-10000} "${s6_service_link}"
 	set -- $(s6-svstat "${s6_service_link}")
 	[ "$1" = "down" ]
-	eend $? "Failed to stop $RC_SVCNAME"
+	eend $? "Failed to stop ${name:-$RC_SVCNAME}"
 }
 
 s6_status()

sh/start-stop-daemon.sh

@@ -38,15 +38,20 @@ ssd_start()
 		service_inactive && _inactive=true
 		mark_service_inactive
 	fi
+	#the eval call is necessary for cases like:
+	# command_args="this \"is a\" test"
+	# to work properly.
 	eval start-stop-daemon --start \
 		--exec $command \
+		${chroot:+--chroot} $chroot \
 		${procname:+--name} $procname \
 		${pidfile:+--pidfile} $pidfile \
 		${command_user+--user} $command_user \
 		$_background $start_stop_daemon_args \
 		-- $command_args $command_args_background
-	if eend $? "Failed to start $RC_SVCNAME"; then
+	if eend $? "Failed to start ${name:-$RC_SVCNAME}"; then
 		service_set_value "command" "${command}"
+		[ -n "${chroot}" ] && service_set_value "chroot" "${chroot}"
 		[ -n "${pidfile}" ] && service_set_value "pidfile" "${pidfile}"
 		[ -n "${procname}" ] && service_set_value "procname" "${procname}"
 		return 0
@@ -61,22 +66,27 @@ ssd_start()
 
 ssd_stop()
 {
+	local _progress=
 	local startcommand="$(service_get_value "command")"
+	local startchroot="$(service_get_value "chroot")"
 	local startpidfile="$(service_get_value "pidfile")"
 	local startprocname="$(service_get_value "procname")"
 	command="${startcommand:-$command}"
+	chroot="${startchroot:-$chroot}"
 	pidfile="${startpidfile:-$pidfile}"
 	procname="${startprocname:-$procname}"
 	[ -n "$command" -o -n "$procname" -o -n "$pidfile" ] || return 0
+	yesno "${command_progress}" && _progress=--progress
 	ebegin "Stopping ${name:-$RC_SVCNAME}"
 	start-stop-daemon --stop \
 		${retry:+--retry} $retry \
 		${command:+--exec} $command \
 		${procname:+--name} $procname \
-		${pidfile:+--pidfile} $pidfile \
-		${stopsig:+--signal} $stopsig
+		${pidfile:+--pidfile} $chroot$pidfile \
+		${stopsig:+--signal} $stopsig \
+		${_progress}
 
-	eend $? "Failed to stop $RC_SVCNAME"
+	eend $? "Failed to stop ${name:-$RC_SVCNAME}"
 }
 
 ssd_status()

sh/supervise-daemon.sh

@@ -0,0 +1,58 @@
+# start / stop / status functions for supervise-daemon
+
+# Copyright (c) 2016 The OpenRC Authors.
+# See the Authors file at the top-level directory of this distribution and
+# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+#
+# This file is part of OpenRC. It is subject to the license terms in
+# the LICENSE file found in the top-level directory of this
+# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
+# This file may not be copied, modified, propagated, or distributed
+#    except according to the terms contained in the LICENSE file.
+
+supervise_start()
+{
+	if [ -z "$command" ]; then
+		ewarn "The command variable is undefined."
+		ewarn "There is nothing for ${name:-$RC_SVCNAME} to start."
+		return 1
+	fi
+
+	ebegin "Starting ${name:-$RC_SVCNAME}"
+	# The eval call is necessary for cases like:
+	# command_args="this \"is a\" test"
+	# to work properly.
+	eval supervise-daemon --start \
+		${chroot:+--chroot} $chroot \
+		${pidfile:+--pidfile} $pidfile \
+		${command_user+--user} $command_user \
+		$supervise_daemon_args \
+		$command \
+		-- $command_args $command_args_foreground
+	rc=$?
+	if [ $rc = 0 ]; then
+		[ -n "${chroot}" ] && service_set_value "chroot" "${chroot}"
+		[ -n "${pidfile}" ] && service_set_value "pidfile" "${pidfile}"
+	fi
+	eend $rc "failed to start ${name:-$RC_SVCNAME}"
+}
+
+supervise_stop()
+{
+	local startchroot="$(service_get_value "chroot")"
+	local startpidfile="$(service_get_value "pidfile")"
+	chroot="${startchroot:-$chroot}"
+	pidfile="${startpidfile:-$pidfile}"
+	[ -n "$pidfile" ] || return 0
+	ebegin "Stopping ${name:-$RC_SVCNAME}"
+	supervise-daemon --stop \
+		${pidfile:+--pidfile} $chroot$pidfile \
+		${stopsig:+--signal} $stopsig
+
+	eend $? "Failed to stop ${name:-$RC_SVCNAME}"
+}
+
+supervise_status()
+{
+	_status
+}

sh/tmpfiles.sh.in

@@ -10,8 +10,10 @@
 # http://projects.archlinux.org/initscripts.git/tree/arch-tmpfiles
 #
 # See the tmpfiles.d manpage as well:
+# https://www.freedesktop.org/software/systemd/man/tmpfiles.d.html
+# This script should match the old manpage
 # http://0pointer.de/public/systemd-man/tmpfiles.d.html
-# This script should match the manpage as of 2012/03/12
+# as of 2012/03/12 and also implements some more recent features
 #
 
 DRYRUN=0
@@ -33,12 +35,28 @@ warninvalid() {
 	error=$(( error+1 ))
 } >&2
 
+invalid_option() {
+	printf "tmpfiles: invalid option '%s'\n" "$1" >&2
+	exit 1
+}
+
 dryrun_or_real() {
 	local dryrun=
 	[ $DRYRUN -eq 1 ] && dryrun=echo
 	$dryrun "$@"
 }
 
+_chattr() {
+	local attr="$2"
+	case $attr in
+		[+-=]*) : ;;
+		'') return ;;
+		*) attr="+$attr" ;;
+	esac
+	local IFS=
+	dryrun_or_real chattr $1 "$attr" -- $3
+}
+
 relabel() {
 	local path
 	local paths=$1 mode=$2 uid=$3 gid=$4
@@ -158,6 +176,37 @@ _v() {
 	_d "$@"
 }
 
+_q() {
+	# Similar to _v. However, make sure that the subvolume will be assigned
+	# to the same higher-level quota groups as the subvolume it has
+	# been created in.
+	# TODO: Implement btrfs subvol creation.
+	_d "$@"
+}
+
+_Q() {
+	# Similar to q. However, instead of copying the higher-level quota
+	# group assignments from the parent as-is, the lowest quota group
+	# of the parent subvolume is determined that is not the
+	# leaf quota group.
+	# TODO: Implement btrfs subvol creation.
+	_d "$@"
+}
+
+_h() {
+	# Set file/directory attributes. Lines of this type accept
+	# shell-style globs in place of normal path names.
+	# The format of the argument field matches chattr
+	_chattr '' "$6" "$1"
+}
+
+_H() {
+	# Recursively set file/directory attributes. Lines of this type accept
+	# shell-syle globs in place of normal path names.
+	# Does not follow symlinks
+	_chattr -R "$6" "$1"
+}
+
 _L() {
 	# Create a symlink if it doesn't exist yet
 	local path=$1 mode=$2 uid=$3 gid=$4 age=$5 arg=$6
@@ -259,35 +308,7 @@ _Z() {
 BOOT=0 CREATE=0 REMOVE=0 CLEAN=0 VERBOSE=0 DRYRUN=0 error=0 LINENO=0
 EXCLUDE=
 PREFIX=
-FILE=
-fragments=
-# XXX: The harcoding of /usr/lib/ is an explicit choice by upstream
-tmpfiles_dirs='/usr/lib/tmpfiles.d/ /run/tmpfiles.d/ /etc/tmpfiles.d/'
-tmpfiles_basenames=''
-tmpfiles_d=''
-# Build a list of sorted unique basenames
-# directories declared later in the tmpfiles_d array will override earlier
-# directories, on a per file basename basis.
-# `/etc/tmpfiles.d/foo.conf' supersedes `/usr/lib/tmpfiles.d/foo.conf'.
-# `/run/tmpfiles/foo.conf' will always be read after `/etc/tmpfiles.d/bar.conf'
-for d in ${tmpfiles_dirs} ; do
-	[ -d $d ] && for f in ${d}/*.conf ; do
-		case "${f##*/}" in
-			systemd.conf|systemd-*.conf) continue;;
-		esac
-		[ -f $f ] && tmpfiles_basenames="${tmpfiles_basenames}\n${f##*/}"
-	done # for f in ${d}
-done # for d in ${tmpfiles_dirs}
-tmpfiles_basenames="$(printf "${tmpfiles_basenames}\n" | sort -u )"
-
-for b in $tmpfiles_basenames ; do
-	real_f=''
-	for d in $tmpfiles_dirs ; do
-		f=${d}/${b}
-		[ -f "${f}" ] && real_f=$f
-	done
-	[ -f "${real_f}" ] && tmpfiles_d="${tmpfiles_d} ${real_f}"
-done
+FILES=
 
 while [ $# -gt 0 ]; do
 	case $1 in
@@ -299,6 +320,8 @@ while [ $# -gt 0 ]; do
 		--dryrun|--dry-run) DRYRUN=1 ;;
 		--exclude-prefix=*) EXCLUDE="${EXCLUDE}${1##--exclude-prefix=} " ;;
 		--prefix=*) PREFIX="${PREFIX}${1##--prefix=} " ;;
+		-*) invalid_option "$1" ;;
+		*) FILES="${FILES} $1"
 	esac
 	shift
 done
@@ -313,10 +336,49 @@ if [ "$CREATE$REMOVE" = '00' ]; then
 	exit 1
 fi
 
+# XXX: The harcoding of /usr/lib/ is an explicit choice by upstream
+tmpfiles_dirs='/usr/lib/tmpfiles.d /run/tmpfiles.d /etc/tmpfiles.d'
+tmpfiles_basenames=''
+
+if [ -z "${FILES}" ]; then
+	# Build a list of sorted unique basenames
+	# directories declared later in the tmpfiles_d array will override earlier
+	# directories, on a per file basename basis.
+	# `/etc/tmpfiles.d/foo.conf' supersedes `/usr/lib/tmpfiles.d/foo.conf'.
+	# `/run/tmpfiles/foo.conf' will always be read after `/etc/tmpfiles.d/bar.conf'
+	for d in ${tmpfiles_dirs} ; do
+		[ -d $d ] && for f in ${d}/*.conf ; do
+			case "${f##*/}" in
+				systemd.conf|systemd-*.conf) continue;;
+			esac
+			[ -f $f ] && tmpfiles_basenames="${tmpfiles_basenames}\n${f##*/}"
+		done # for f in ${d}
+	done # for d in ${tmpfiles_dirs}
+	FILES="$(printf "${tmpfiles_basenames}\n" | sort -u )"
+fi
+
+tmpfiles_d=''
+
+for b in ${FILES} ; do
+	if [ "${b##*/}" != "${b}" ]; then
+		# The user specified a path on the command line
+		# Just pass it through unaltered
+		tmpfiles_d="${tmpfiles_d} ${b}"
+	else
+		real_f=''
+		for d in $tmpfiles_dirs ; do
+			f=${d}/${b}
+			[ -f "${f}" ] && real_f=$f
+		done
+		[ -f "${real_f}" ] && tmpfiles_d="${tmpfiles_d} ${real_f}"
+	fi
+done
+
 error=0
 
 # loop through the gathered fragments, sorted globally by filename.
 # `/run/tmpfiles/foo.conf' will always be read after `/etc/tmpfiles.d/bar.conf'
+FILE=
 for FILE in $tmpfiles_d ; do
 	LINENUM=0
 
@@ -353,7 +415,7 @@ for FILE in $tmpfiles_d ; do
 
 		# whine about invalid entries
 		case $cmd in
-			f|F|w|d|D|v|p|L|c|C|b|x|X|r|R|z|Z) ;;
+			f|F|w|d|D|v|p|L|c|C|b|x|X|r|R|z|Z|q|Q|h|H) ;;
 			*) warninvalid ; continue ;;
 		esac
 

src/libeinfo/einfo.h

@@ -71,6 +71,7 @@ void elog(int, const char * EINFO_RESTRICT, ...) EINFO_PRINTF(2, 3);
  *
  * The n suffix denotes that no new line should be printed.
  * The v suffix means only print if EINFO_VERBOSE is yes.
+ * The x suffix means function will exit() returning failure.
  */
 /*@{*/
 int einfon(const char * __EINFO_RESTRICT, ...) EINFO_PRINTF(1, 2);

src/librc/librc-misc.c

@@ -404,6 +404,12 @@ librc_hidden_def(rc_config_value)
  * each rc_conf_value call */
 static RC_STRINGLIST *rc_conf = NULL;
 
+static void
+_free_rc_conf(void)
+{
+	rc_stringlist_free(rc_conf);
+}
+
 char *
 rc_conf_value(const char *setting)
 {
@@ -413,17 +419,13 @@ rc_conf_value(const char *setting)
 
 	if (! rc_conf) {
 		rc_conf = rc_config_load(RC_CONF);
-#ifdef DEBUG_MEMORY
 		atexit(_free_rc_conf);
-#endif
 
 		/* Support old configs. */
 		if (exists(RC_CONF_OLD)) {
 			old = rc_config_load(RC_CONF_OLD);
 			TAILQ_CONCAT(rc_conf, old, entries);
-#ifdef DEBUG_MEMORY
 			free(old);
-#endif
 		}
 
 		rc_conf = rc_config_directory(rc_conf);
@@ -443,11 +445,3 @@ rc_conf_value(const char *setting)
 	return rc_config_value(rc_conf, setting);
 }
 librc_hidden_def(rc_conf_value)
-
-#ifdef DEBUG_MEMORY
-static void
-_free_rc_conf(void)
-{
-	rc_stringlist_free(rc_conf);
-}
-#endif

src/librc/librc.c

@@ -285,6 +285,9 @@ detect_container(const char *systype)
 		return RC_SYS_RKT;
 	else if (file_regex("/proc/1/environ", "container=systemd-nspawn"))
 		return RC_SYS_SYSTEMD_NSPAWN;
+	else if (exists("/.dockerenv"))
+		return RC_SYS_DOCKER;
+	/* old test, I'm not sure when this was valid. */
 	else if (file_regex("/proc/1/environ", "container=docker"))
 		return RC_SYS_DOCKER;
 #endif