Release openrc-0.9.9.1

Skip pam if running as root
Reported-by: Piotr Karbowski <piotr.karbowski@gmail.com> X-Gentoo-Bug: 386623 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=386623
2012-02-24 11:13:27 -06:00 · 2012-02-24 09:06:51 -06:00
285 changed files with 11646 additions and 9915 deletions
--- a/99
+++ b/99
@@ -1,99 +0,0 @@
-Alessio Ababilov <ilovedevlinux@gmail.com>
-Alexander Berntsen <alexander@plaimi.net>
-Alexander Mezin <mezin.alexander@gmail.com>
-Alexander Tsoy <alexander@tsoy.me>
-Alexander Vershilov <alexander.vershilov@gmail.com>
-Alexander Vershilov <qnikst@gentoo.org>
-Alexander V Vershilov <qnikst@gentoo.org>
-Alexey Shvetsov <alexxy@gentoo.org>
-Alon Bar-Lev <alon.barlev@gmail.com>
-Amadeusz Żołnowski <aidecoe@aidecoe.name>
-Andrew Gregory <andrew.gregory.8@gmail.com>
-Anthony Donnelly <Amzo@archbsd.com>
-Anthony G. Basile <basile@opensource.dyc.edu>
-Anthony G. Basile <blueness@gentoo.org>
-Austin S. Hemmelgarn <ahferroin7@gmail.com>
-Benda Xu <heroxbd@gentoo.org>
-Björn Baumbach <bb@sernet.de>
-Charlie <root@uberlaptop.development.ltl>
-Chris Richards <gizmo@giz-works.com>
-Christian <christian@ch-sc.de>
-Christian Ruppert <idl0r@gentoo.org>
-Christian Wetzig <gentoo@wetzig.de>
-Christopher Head <chead@telus.net>
-Consus <consus@gmx.com>
-Daniel Mierswa <impulze@impulze.org>
-Daniel Robbins <drobbins@funtoo.org>
-Diego Elio Pettenò <flameeyes@flameeyes.eu>
-Diego Elio Pettenò <flameeyes@gmail.com>
-Diego <flameeyes@gentoo.org>
-Dirk Sondermann <ds-gentoo@dyximaq.de>
-Doug Freed <dwfreed@mtu.edu>
-Doug Goldstein <cardoe@cardoe.com>
-Ed Wildgoose <gentoo@wildgooses.com>
-Eray Aslan <eras@gentoo.org>
-Eugeny Shkrigunov <eshkrig@gmail.com>
-Fedja Beader <specing@contact.me.on.irc.freenode.net>
-Flex <frostynova@gmail.com>
-Gabriele Giacone <1o5g4r8o@gmail.com>
-Gary <admin@garyshood.com>
-Gilles Oivier <g.olivier@wanadoo.fr>
-Hank Leininger <hlein@korelogic.com>
-Ian Stakenvicius <axs@gentoo.org>
-Jakob Drexel <jake42@rommel.stw.uni-erlangen.de>
-James Le Cuirot <chewi@aura-online.co.uk>
-Jan Psota <jasiu@belsznica.pl>
-Jason Zaman <jason@perfinion.com>
-Joe Harvell <jharvell@dogpad.net>
-Joe M <joe9mail@gmail.com>
-Johan Bergström <bugs@bergstroem.nu>
-Jory A. Pratt <anarchy@gentoo.org>
-Juan RP <xtraeme@gmail.com>
-Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
-Kfir Lavi <lavi.kfir@gmail.com>
-Kirill Elagin <kirelagin@gmail.com>
-Lars Wendler <polynomial-c@gentoo.org>
-Lorand Kelemen <lorand.kelemen@indgroup.eu>
-Marc Joliet <marcec@gmx.de>
-Marien Zwart <marienz@gentoo.org>
-Michal Gorny <gentoo@mgorny.alt.pl>
-Mihai Moldovan <ionic@ionic.de>
-Mike Frysinger <vapier@gentoo.org>
-Mike Gilbert <floppym@gentoo.org>
-Nao Nakashima <nao.nakashima@gmail.com>
-Natanael Copa <natanael.copa@gmail.com>
-Nathan Phillip Brink <ohnobinki@ohnopublishing.net>
-Ned Ludd <solar@gentoo.org>
-Olivier Huber <oli.huber@gmail.com>
-Patrick Lauer <patrick@gentoo.org>
-Petre Rodan <petre.rodan@simplex.ro>
-Piotr Karbowski <piotr.karbowski@gmail.com>
-Ralph Sennhauser <sera@gentoo.org>
-Richard Yao <ryao@cs.stonybrook.edu>
-Rick Farina (ZeroChaos) <sidhayn@gmail.com>
-Rick Farina (Zero_Chaos) <zerochaos@gentoo.org>
-Robin H. Johnson <robbat2@gentoo.org>
-Robin H. Johnson <robbat2@orbis-terrarum.net>
-Robin Johnson <robbat2@gentoo.org>
-Roy Marples <roy@marples.name>
-Salah Coronya <salah.coronya@gmail.com>
-Sebastian Thorarensen <indigo176@blinkenshell.org>
-Semen Maryasin <marsoft@ya.ru>
-Sergei Trofimovich <slyfox@gentoo.org>
-Seth Robertson <in-gentoo@baka.org>
-S. Gilles <sgilles@umd.edu>
-Stefan Knoblich <s.knoblich@axsentis.de>
-Stef Simoens <stef.simoens@scarlet.be>
-Steve L <slong@rathaus.eclipse.co.uk>
-Steven Chamberlain <steven@pyro.eu.org>
-Svante Signell <svante.signell@gmail.com>
-Sven Vermeulen <sven.vermeulen@siphos.be>
-Thomas D <whissi@whissi.de>
-Thomas Pfaff <tpfaff@gmx.net>
-Trevor Summers Smith <trevorsummerssmith@gmail.com>
-Walter <walter@pratyeka.org>
-William Hubbs <w.d.hubbs@gmail.com>
-William Hubbs <williamh@gentoo.org>
-Will Miles <wmiles@sgl.com>
-Yun Zheng Hu <hu@fox-it.com>
-Yuta SATOH <nigoro.gentoo@0x100.com>
--- a/BUSYBOX.md
+++ b/BUSYBOX.md
@@ -1,32 +0,0 @@
-# Using Busybox as your Default Shell with OpenRC
-
-If you have/bin/sh linked to busybox, you need to be aware of several
-incompatibilities between busybox's applets and the standalone
-counterparts. Since it is possible to configure busybox to not include
-these applets or to prefer the standalone counterparts, OpenRC does not
-attempt to support the busybox applets.
-
-For now, it is recommended that you disable the following busybox
-configuration settings for best results with OpenRC.
-
-CONFIG_START_STOP_DAEMON -- The start-stop-daemon applet is not compatible with
-start-stop-daemon in OpenRC.
-
-CONFIG_MOUNT -- The mount applet does not support the -O [no]_netdev options to
-skip over or include network file systems when the -a option is present.
-
-CONFIG_UMOUNT -- The umount applet does not support the -O option along with -a.
-
-CONFIG_SWAPONOFF -- The swapon applet does not support the -e option
-or recognize the nofail option in fstab.
-
-CONFIG_SETFONT -- The setfont applet does not support the -u option from kbd.
-
-CONFIG_IP -- The ip applet  doesn't support the "scope" modifier for
-"ip route add" and "ip address add".
-
-CONFIG_BB_SYSCTL -- The sysctl applet does not support the --system command
-line switch.
-
-There is work to get most of these supported by busybox, so this file
-will be updated as things change.
--- a/1491
+++ b/1491
--- a/49
+++ b/49
@@ -0,0 +1,49 @@
+The following is a list of files and features that are going to be removed in
+the source tree.  Every entry should contain what exactly is going away, why it
+is happening, and who is going to be doing the work.  When the feature is
+removed, it should also be removed from this file.
+
+---------------------------
+
+What: oldnet ADSL rp-pppoe mode
+
+When: undecided
+
+Why: Replaced by the oldnet PPP module
+
+Who:  Robin H. Johnson <robbat2@gentoo.org>
+
+---------------------------
+
+What: oldnet /etc/conf.d/wireless
+
+When: undecided
+
+Why: All configuration moved to /etc/conf.d/net
+
+Who:  Robin H. Johnson <robbat2@gentoo.org>
+
+---------------------------
+
+What: Service pause action
+
+When: Removed already, compatbility warning in place.
+
+Why: ...
+
+Who:
+
+---------------------------
+
+What: Service --startas, --chuid , --oknodo
+
+When: undecided
+
+Why: Obsolete or replaced by other options.
+	 --startas => use --name or --exec
+	 --chuid => use --user
+	 --oknodo => ignore return code instead
+
+Who:
+
+---------------------------
--- a/FEATURE-REMOVAL-SCHEDULE.md
+++ b/FEATURE-REMOVAL-SCHEDULE.md
@@ -1,78 +0,0 @@
-# Features Scheduled for Removal
-
-The following is a list of files and features that are going to be removed in
-the source tree.  Every entry should contain what exactly is going away, why it
-is happening, and who is going to be doing the work.  When the feature is
-removed, it should also be removed from this file.
-
-## Service pause action
-
-When: 1.0
-
-Why: The same affect can be obtained with the --nodeps option to stop.
-
-Who:
-
-## start-stop-daemon options --startas, --chuid , --oknodo
-
-When: 1.0
-
-Why: Obsolete or replaced by other options.
-
-* --startas => use --name or --exec
-* --chuid => use --user
-* --oknodo => ignore return code instead
-
-Who:
-
-## runscript and rc symbolic links
-
-When: 1.0
-
-Why: Deprecated in favor of openrc-run and openrc due to naming
-	 conflicts with other software.
-
-Who:
-
-## support for the opts variable in service scripts
-
-When: 1.0
-
-Why: Depprecated in favor of extra_commands, extra_started_commands
-	 and extra_stopped_commands.
-
-Who:
-
-## support for local_start and local_stop
-
-When: 1.0
-
-Why: Depprecated in favor of executable scripts in @SYSCONFDIR@/local.d
-
-Who:
-
-## the mtab service script
-
-When: force /etc/mtab to link to /proc/self/mounts in 1.0, remove
-	  service in 2.0
-
-Why: /etc/mtab should be a symbolic link to /proc/self/mounts on modern
-	 Linux systems
-
-Who:
-
-## C API Functions in rc.h
-
-If you have a c program that links to librc and uses functions from
-there, this section will list API functions which are deprecated and
-will be removed along with the reason they are being removed.
-
-### rc_getline()
-
-When: 1.0
-
-Why: The getline() function was standardized in POSIX.1-2008, so it
-	 should be available on POSIX systems.
-
-Who:
-
--- a/HISTORY.md
+++ b/HISTORY.md
@@ -1,62 +0,0 @@
-# OpenRC History
-
-This history of OpenRC was written by Daniel Robbins, Roy Marples, William
-Hubbs and others.
-
-The Gentoo modular init scripts were developed by Daniel Robbins for Gentoo
-Linux 1.0_rc6 during most of 2001 and released in September 2001. After their
-development, the dependency-based init script system was maintained by a
-number of senior developers, starting with Azarah (Martin Schlemmer), with
-migration to the new init system assisted by Woodchip (Donnie Davies) who
-converted all ebuild init scripts to work with the new system. As Grant
-Goodyear notes: 
-
-"My recollection is that one of woodchip's more impressive early feats
-was the complete replacement of all of the init scripts in Portage
-for Gentoo Linux 1.0_rc6. Through 1.0_rc5 Gentoo had used fairly
-standard rc scripts modified from Stampede Linux, but for 1.0_rc6 Daniel
-Robbins (drobbins) and Martin Schlemmer (azarah) had created a new
-dependency-based init script system that is still used today. Within a
-span of days Donny rewrote every single init script in the Portage tree
-and committed new masked packages to await the release of 1.0_rc6. Thanks to
-woodchip (and drobbins and azarah, of course) the
-transition to the new init scripts was nearly painless." [1] 
-
-Roy Marples became a Gentoo/Linux developer in 2004 and wrote the modular
-network scripts for the Gentoo baselayout package. Towards the end of 2005,
-he became the primary maintainer for baselayout and the init scripts. 
-
-At the start of 2007, He announced the ongoing development of
-baselayout-2, containing a rewritten core coded in C and allowing POSIX sh
-init scripts instead of forcing the use of bash. By mid 2007, He had
-re-implemented the Gentoo init script design created by Daniel Robbins,
-using an entirely new code base. Alpha and pre-release baselayout-2
-snapshots were added to Gentoo's Portage tree as an optional component.
-
-Toward the end of 2007, Roy retired as a Gentoo developer.
-Baselayout-2 was still in the pre stage, and aside from the gentoo-fbsd
-users, it was masked. However, He desired to keep the baselayout-2
-project moving forward as an independent project. The Gentoo Council
-permitted Him to release OpenRC under the 2-clause BSD license,
-managed by him as an external project. 
-
-Around mid-2010, Roy decided to no longer maintain OpenRC. At this
-point, he transferred development back to Gentoo.
-
-William Hubbs, and several other Gentoo developers,  started working on
-OpenRC around this point and brought OpenRC-0.8.x to Gentoo Linux's stable
-tree in 2011.
-
-In 2013 the OpenRC team became independent from Gentoo again and moved primary
-development to github.
-
-Daniel Robbins continues to maintain an independent, forked
-version of OpenRC for Funtoo Linux, which includes a Funtoo-specific network
-configuration system. 
-
-On 17-Dec-2015 utc, Roy gave the OpenRC developers permission to replace his
-copyrights in all source files with a generic Copyright assertion for
-the OpenRC developers as long as we keep the original copyright in the
-binaries and  LICENSE file.
-
-[1] http://www.gentoo.org/news/en/gwn/20040426-newsletter.xml
--- a/24
+++ b/24
@@ -1,24 +0,0 @@
-Copyright (c) 2007-2008, Roy Marples <roy@marples.name>
-Copyright (c) 2007-2015, the OpenRC authors
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice,
-   this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
--- a/26
+++ b/26
@@ -1,19 +1,10 @@
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+# OpenRC Makefile
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

-TOP:=		${dir ${realpath ${firstword ${MAKEFILE_LIST}}}}
-MK=			${TOP}/mk
+include Makefile.inc

-include ${TOP}/Makefile.inc
-
-SUBDIR=		conf.d etc init.d local.d man scripts sh src sysctl.d
+SUBDIR=		conf.d doc etc init.d local.d sysctl.d man net scripts sh src

 # Build pkgconfig or not
 MKPKGCONFIG?=	yes
@@ -26,17 +17,14 @@ SUBDIR+=	runlevels

 INSTALLAFTER=	_installafter

+MK= 		mk
 include ${MK}/sys.mk
 include ${MK}/os.mk
 include ${MK}/subdir.mk
 include ${MK}/dist.mk
-include ${MK}/gitver.mk
+include ${MK}/git.mk

 _installafter:
-ifeq (${MKPREFIX},yes)
 	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/init.d
-else ifneq (${OS},Linux)
-	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/init.d
-endif
 	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/tmp
 	${ECHO} "${VERSION}${GITVER}" > ${DESTDIR}/${LIBEXECDIR}/version
--- a/Makefile.inc
+++ b/Makefile.inc
@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.20.5
+VERSION=	0.9.9.1
 PKG=		${NAME}-${VERSION}
--- a/NEWS.md
+++ b/NEWS.md
@@ -1,109 +0,0 @@
-# OpenRC NEWS
-
-This file will contain a list of notable changes for each release. Note
-the information in this file is in reverse order.
-
-## OpenRC-0.19
-
-This version adds a net-online service. By default, this
-service will check all known network interfaces for a configured
-interface or a carrier. It will register as started only when all
-interfaces are configured and there is at least a carrier on one
-interface. The behaviour of this service can be modified in
-/etc/conf.d/net-online.
-
-Currently, this only works on Linux, but if anyone wants to port to
-*bsd, that would be welcomed.
-
-## OpenRC-0.18.3
-
-Modern Linux systems expect /etc/mtab to be a symbolic link to
-/proc/self/mounts. Reasons for this change include support for mount
-namespaces, which will not work if /etc/mtab is a file.
-By default, the mtab service enforces this on each reboot.
-
-If you find that this breaks your system in some way, please do the
-following:
-
- Set mtab_is_file=yes in /etc/conf.d/mtab.
-
- Restart mtab. This will recreate the /etc/mtab file.
-
- Check for an issue on https://github.com/openrc/openrc/issues
-  explaining why you need /etc/mtab to be a file. If there isn't one,
-  please open one and explain in detail why you need this to be a file.
-  If there is one, please add your comments to it. Please give concrete
-  examples of why  it is important that /etc/mtab be a file instead of a
-  symbolic link. Those comments will be taken into consideration for how
-  long to keep supporting mtab as a file or when the support can be
-  removed.
-
-## OpenRC-0.18
-
-The behaviour of localmount and netmount in this version is changing. In
-the past, these services always started successfully. In this version,
-they will be able to fail if file systems they mount fail to mount. If
-you have file systems listed in fstab which should not be mounted at
-boot time, make sure to add noauto to the mount options. If you have
-file systems that you want to attempt to mount at boot time but failure
-should be allowed, add nofail to the mount options for these file
-systems in fstab.
-
-## OpenRC-0.14
-
-The binfmt service, which registers misc binary formats with the Linux
-kernel, has been separated from the procfs service. This service will be
-automatically added to the boot runlevel for new Linux installs. When
-you upgrade, you will need to use rc-update to add it to your boot
-runlevel.
-
-The procfs service no longer automounts the deprecated usbfs and
-usbdevfs file systems. Nothing should be using usbdevfs any longer, and
-if you still need usbfs it can be added to fstab.
-
-Related to the above change, the procfs service no longer attempts to
-modprobe the usbcore module. If your device manager does not load it,
-you will need to configure the modules service to do so.
-
-The override order of binfmt.d and tmpfiles.d directories has been
-changed to match systemd. Files in /run/binfmt.d and /run/tmpfiles.d
-override their /usr/lib counterparts, and files in the /etc counterparts
-override both /usr/lib and /run.
-
-## OpenRC-0.13.2
-
-A chroot variable has been added to the service script variables.
-This fixes the support for running a service in a chroot.
-This is documented in man 8 openrc-run.
-
-The netmount service now mounts nfs file systems.
-This change was made to correct a fix for an earlier bug.
-
-## OpenRC-0.13
-
-/sbin/rc was renamed to /sbin/openrc and /sbin/runscript was renamed to
-/sbin/openrc-run due to naming conflicts with other software.
-
-Backward compatible symbolic links are currently in place so your
-system will keep working if you are using the old names; however, it is
-strongly advised that you migrate to the new names because the symbolic
-links will be removed in the future.
-Warnings have been added to assist with this migration; however, due to the
-level of noise they produce, they only appear in verbose mode in this release.
-
-The devfs script now handles the initial mounting and setup of the
-/dev directory. If /dev has already been mounted by the kernel or an
-initramfs, devfs will remount /dev with the correct mount options
-instead of mounting a second /dev over the existing mount point.
-
-It attempts to mount /dev from fstab first if an entry exists there. If
-it doesn't it attempts to mount devtmpfs if it is configured in the
-kernel. If not, it attempts to mount tmpfs.
-If none of these is available, an error message is displayed and static
-/dev is assumed.
-
-## OpenRC-0.12
-
-The net.* scripts, originally from Gentoo Linux, have
-been removed. If you need these scripts, look for a package called
-netifrc, which is maintained by them.
--- a/84
+++ b/84
@@ -0,0 +1,84 @@
+OpenRC README
+
+
+Installation
+------------
+make install
+Yup, that simple. Works with GNU make.
+
+You may wish to tweak the installation with the below arguments
+PROGLDFLAGS=-static
+LIBNAME=lib64
+DESTDIR=/tmp/openrc-image
+MKPAM=pam
+MKPKGCONFIG=no
+MKSELINUX=yes
+MKSTATICLIBS=no
+MKTERMCAP=ncurses
+MKTERMCAP=termcap
+PKG_PREFIX=/usr/pkg
+LOCAL_PREFIX=/usr/local
+PREFIX=/usr/local
+
+We don't support building a static OpenRC with PAM.
+You may need to use PROGLDFLAGS=-Wl,-Bstatic on glibc instead of just -static.
+If you debug memory under valgrind, add -DDEBUG_MEMORY to your CPPFLAGS
+so that all malloc memory should be freed at exit.
+
+You can also brand OpenRC if you so wish like so
+BRANDING=\"Gentoo/$(uname -s)\"
+
+PKG_PREFIX should be set to where packages install to by default.
+LOCAL_PREFIX should be set when to where user maintained packages are.
+Only set LOCAL_PREFIX if different from PKG_PREFIX.
+PREFIX should be set when OpenRC is not installed to /.
+
+If any of the following files exist then we do not overwrite them
+/etc/devd.conf
+/etc/rc
+/etc/rc.shutdown
+/etc/conf.d/*
+
+rc and rc.shutdown are the hooks from the BSD init into OpenRC.
+devd.conf is modified from FreeBSD to call /etc/rc.devd which is a generic
+hook into OpenRC.
+inittab is the same, but for SysVInit as used by most Linux distributions.
+This can be found in the support folder.
+Obviously, if you're installing this onto a system that does not use OpenRC
+by default then you may wish to backup the above listed files, remove them
+and then install so that the OS hooks into OpenRC.
+
+init.d.misc is not installed by default as the scripts will need
+tweaking on a per distro basis. They are also non essential to the operation
+of the system.
+
+
+Reporting Bugs
+--------------
+Since Gentoo Linux is hosting OpenRC development, Bugs should go to
+the Gentoo Bugzilla:
+	http://bugs.gentoo.org/
+They should be filed under the "Gentoo Hosted Projects" product and
+the "openrc" component.
+
+
+History - by Roy Marples
+------------------------
+I became a Gentoo/Linux developer in 2004 and wrote the modular network
+scripts for the Gentoo baselayout package. baselayout is a collection of
+bash scripts to bring up your computer and its services.
+Then towards the end of 2005 I found myself as the primary maintainer
+for baselayout.
+
+At the start of 2007, baselayout-2 is announced to the world, re-writing the
+core of baselayout in C and allowing POSIX sh init scripts instead of
+forcing the use of bash. By Mid 2007 I have re-written everything, including
+init scripts, and alpha and pre baselayout-2 snapshots where put into Gentoo.
+Towards the end of 2007 I retired as a Gentoo developer for reasons I won't
+go into here. baselayout-2 was still in the pre stage, and aside from the
+fbsd users, it was masked everywhere. However, I also desired to keep the
+baselayout-2 project alive, but outside of Gentoo and into other projects
+such as FreeBSD.
+
+As such, the Gentoo Council have allowed the creation of OpenRC under the
+2 clause BSD license, managed by me as an external project.
--- a/README.md
+++ b/README.md
@@ -1,99 +0,0 @@
-# OpenRC README
-
-OpenRC is a dependency-based init system that works with the
-system-provided init program, normally `/sbin/init`. Currently, it does
-not have an init program of its own.
-
-## Installation
-
-OpenRC requires GNU make.
-
-Once you have GNU Make installed, the default OpenRC installation can be
-executed using this command:
-
-make install
-
-## Configuration
-
-You may wish to configure the installation by passing one or more of the
-below arguments to the make command
-
-```
-PROGLDFLAGS=-static
-LIBNAME=lib64
-DESTDIR=/tmp/openrc-image
-MKNET=no
-MKPAM=pam
-MKPREFIX=yes
-MKPKGCONFIG=no
-MKSELINUX=yes
-MKSTATICLIBS=no
-MKTERMCAP=ncurses
-MKTERMCAP=termcap
-MKTOOLS=yes
-PKG_PREFIX=/usr/pkg
-LOCAL_PREFIX=/usr/local
-PREFIX=/usr/local
-BRANDING=\"Gentoo/$(uname -s)\"
-```
-
-## Notes
-
-We don't support building a static OpenRC with PAM.
-
-You may need to use `PROGLDFLAGS=-Wl,-Bstatic` on glibc instead of just `-static`.
-
-If you debug memory under valgrind, add `-DDEBUG_MEMORY`
-to your `CPPFLAGS` so that all malloc memory should be freed at exit.
-
-If you are building OpenRC for a Gentoo Prefix installation, add `MKPREFIX=yes`.
-
-`PKG_PREFIX` should be set to where packages install to by default.
-
-`LOCAL_PREFIX` should be set when to where user maintained packages are.
-Only set `LOCAL_PREFIX` if different from `PKG_PREFIX`.
-
-`PREFIX` should be set when OpenRC is not installed to /.
-
-If any of the following files exist then we do not overwrite them
-
-```
-/etc/devd.conf
-/etc/rc
-/etc/rc.shutdown
-/etc/conf.d/*
-```
-
-`rc` and `rc.shutdown` are the hooks from the BSD init into OpenRC.
-
-`devd.conf` is modified from FreeBSD to call `/etc/rc.devd` which is a
-generic hook into OpenRC.
-
-`inittab` is the same, but for SysVInit as used by most Linux distributions.
-This can be found in the support folder.
-
-Obviously, if you're installing this onto a system that does not use
-OpenRC by default then you may wish to backup the above listed files,
-remove them and then install so that the OS hooks into OpenRC.
-
-`init.d.misc` is not installed by default as the scripts will need
-tweaking on a per distro basis. They are also non essential to the
-operation of the system.
-
-## Reporting Bugs
-
-If you are using Gentoo Linux, bugs can be filed on their bugzilla under
-the `gentoo hosted projects` product and the `openrc` component [1].
-Otherwise, you can report issues on our github [2].
-
-Better yet, if you can contribute code, please feel free to submit pull
-requests [3].
-
-## IRC Channel
-
-We have an official irc channel, #openrc on freenode, feel free to join
-us there.
-
-[1]	https://bugs.gentoo.org/
-[2]	https://github.com/openrc/openrc/issues
-[3]	https://github.com/openrc/openrc/pulls
--- a/README.newnet
+++ b/README.newnet
@@ -1,36 +0,0 @@
-OpenRC Network Ideals
---------------------
-
-The new style networking for OpenRC is very simplistic - provide a basic means
-of configuring static interface address and routes whilst allowing the
-possibility to run any command at any point.
-
-In a nutshell, init.d/network is a wrapper around ifconfig(8) and
-init.d/staticroute is wrapper around route(8).
-
-In the Perfect World (TM) ifconfig should be able to configure everything
-about the interface easily * . The BSD family almost get this right and Linux
-epically fails.
-
-* Only static configuration, including link setup.
-For dynamic, static, IPv4LL, arping and per ssid IPv4 setup dhcpcd-5.x
-provides your needs.
-
-It fails because there are many tools to do the same job and often have
-vastly different syntax where they could be similar. In other words, there
-is no coherence.
-
-OpenRC-0.4.x and older (inc Gentoo baselayout-1) had a collection of scripts
-for each tool and allowed a script per interface. Over the years, this design
-has proven very hard to maintain as each user has their own idea of how
-things should work. Also, there were (and still are) race conditions.
-
-So where do we go from here?
-Well, it's possible to use the new network scripts using the tools
-currently available. It's just harder as you have to know them and their
-documentation can be lacking at times.
-The correct end goal is a BSD style ifconfig tool.
-I've started work on it, but the project has stalled somewhat.
-It's display only right now and the source is not yet publicly available.
-If you have the skills and share the vision then contact me privately and
-we'll take it from there.
--- a/STYLE-GUIDE.md
+++ b/STYLE-GUIDE.md
@@ -1,23 +1,23 @@
-# OpenRC Style Guide
-
 This is the openrc style manual.  It governs the coding style of all code
 in this repository.  Follow it.  Contact openrc@gentoo.org for any questions
 or fixes you might notice.

-## C CODE
+##########
+# C CODE #
+##########

-The BSD Kernel Normal Form (KNF) style is used [1]. Basically, it is like
-K&R/LKML, but wrapped lines that are indented use 4 spaces. Here are the
-highlights.
+The BSD Kernel Normal Form (KNF) style is used:
+	http://en.wikipedia.org/wiki/Indent_style#BSD_KNF_style
+Basically, it's like K&R/LKML, but wrapped lines that are indented use 4 spaces.

- no trailing whitespace
- indented code use tabs (not line wrapped)
- cuddle the braces (except for functions)
- space after native statements and before paren (for/if/while/...)
- no space between function and paren
- pointer asterisk cuddles the variable, not the type
+Highlights:
+	- no trailing whitespace
+	- indented code use tabs (not line wrapped)
+	- cuddle the braces (except for functions)
+	- space after native statements and before paren (for/if/while/...)
+	- no space between function and paren
+	- pointer asterisk cuddles the variable, not the type

-```
 void foo(int c)
 {
 	int ret = 0;
@@ -32,15 +32,16 @@ void foo(int c)

 	return ret;
 }
-```

-## COMMIT MESSAGES
+##################
+# COMMIT MESSAGES #
+##################

 The following is an example of a correctly formatted git commit message
 for this repository. Most of this information came from this blog post
-[2], so I would like to thank the author.
+[1], so I would like to thank the author.

-```
+### cut here ###
 Capitalized, short (50 chars or less) summary

 More detailed explanatory text, if necessary.  Wrap it to about 72
@@ -50,7 +51,7 @@ line separating the summary from the body is critical (unless you omit
 the body entirely); tools like rebase can get confused if you run the
 two together.

-Write your commit message in the imperative: "Fix bug" and not "Fixed
+Write your commit message in the present tense: "Fix bug" and not "Fixed
 bug."  This convention matches up with commit messages generated by
 commands like git merge and git revert.

@@ -66,7 +67,7 @@ Further paragraphs come after blank lines.
 Reported-by: User Name <email>
 X-[Distro]-Bug: BugID
 X-[Distro]-Bug-URL: URL for the bug (on the distribution's web site typically)
-```
+### cut here ###

 If you did not write the code and the patch does not include authorship
 information in a format git can use, please use the --author option of the
@@ -80,5 +81,5 @@ different from the author and committer.
  *BSD. Also, [Distro] should be replaced with the name of the
  distribution, e.g. X-Gentoo-Bug.

-[1]	http://en.wikipedia.org/wiki/Indent_style#BSD_KNF_style
-[2] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html
+[1] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html
+
--- a/14
+++ b/14
@@ -5,17 +5,3 @@
 - oldnet[bridging]: Review setting of bridge configuration on dynamic interface add

 - Document rc-depend binary.
-
- _ifindex is not a reliable means of calculating metrics:
-	_ifindex is used for calculating metrics for new devices but has a major
-	problem: Since it's only the nth entry in /proc/net/dev
-	And devices may be removed from that file, and reordered, you won't always
-	get the same result.
-	If you do:
-	- add eth0 - _ifindex (eth0=0)
-	- add vlan1 - _ifindex (eth0=0,vlan1=1)
-	- add vlan2 - _ifindex (eth0=0,vlan1=1,vlan2=2)
-	- rem vlan1 - _ifindex (eth0=0,vlan2=1)
-	- add vlan3 - _ifindex (eth0=0,vlan2=1,vlan3=2)
-	Now your routing table has entries for both vlan2 and vlan3 with a metric of 2.
-
--- a/conf.d/Makefile
+++ b/conf.d/Makefile
@@ -1,22 +1,16 @@
-include ../mk/net.mk
-
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount netmount urandom tmpfiles \
-		${CONF-${OS}}
+CONF=	bootmisc fsck hostname localmount network staticroute urandom \
+	${CONF-${OS}}

-ifeq (${MKNET},yes)
-CONF+= network staticroute
 TARGETS+=	network staticroute
 CLEANFILES+=	network staticroute
-endif

 MK=	../mk
 include ${MK}/os.mk

 CONF-FreeBSD=	ipfw moused powerd rarpd savecore syscons

-CONF-Linux=	consolefont devfs dmesg hwclock keymaps killprocs modules mtab \
-	net-online
+CONF-Linux=	consolefont dmesg hwclock keymaps killprocs modules

 CONF-NetBSD=	moused rarpd savecore

--- a/conf.d/bootmisc
+++ b/conf.d/bootmisc
@@ -8,8 +8,3 @@ wipe_tmp="YES"
 # Write the initial dmesg log into /var/log/dmesg after boot
 # This may be useful if you need the kernel boot log afterwards
 log_dmesg="YES"
-
-# Save the previous dmesg log to dmesc.old
-# This may be useful if you need to compare the current boot to the
-# previous one.
-#previous_dmesg=no
--- a/conf.d/consolefont
+++ b/conf.d/consolefont
@@ -1,10 +1,9 @@
-# The consolefont service is not activated by default. If you need to
-# use it, you should run "rc-update add consolefont boot" as root.
-#
 # consolefont specifies the default font that you'd like Linux to use on the
 # console.  You can find a good selection of fonts in /usr/share/consolefonts;
 # you shouldn't specify the trailing ".psf.gz", just the font name below.
 # To use the default console font, comment out the CONSOLEFONT setting below.
+# This setting is used by the /etc/init.d/consolefont script (NOTE: if you do
+# not want to use it, run "rc-update del consolefont boot" as root).
 consolefont="default8x16"

 # consoletranslation is the charset map file to use.  Leave commented to use
--- a/conf.d/devfs
+++ b/conf.d/devfs
@@ -1,8 +0,0 @@
-# OpenRC will attempt each of the following in succession to mount /dev.
-#
-# 1. If there is an entry for /dev in fstab, it will be used.
-# 2. If devtmpfs is defined in the kernel, it will be used.
-# 3. If tmpfs is defined in the kernel, it will be used.
-#
-# Set this to yes if you do not want OpenRC to attempt to mount /dev.
-# skip_mount_dev="NO"
--- a/conf.d/dmesg
+++ b/conf.d/dmesg
@@ -1,3 +1,3 @@
 # Sets the level at which logging of messages is done to the
-# console.  See dmesg(1) for more info.
+# console.  See dmesg(8) for more info.
 dmesg_level="1"
--- a/conf.d/fsck
+++ b/conf.d/fsck
@@ -32,9 +32,3 @@ fsck_on_battery="YES"
 # This is useful when periodic filesystem checks are causing undesirable
 # delays at startup, but such delays at shutdown are acceptable.
 fsck_shutdown="NO"
-
-# fsck_abort_on_errors can be set to no to cause fsck to not abort on
-# errors.
-# This is useful when periodic filesystem checks are causing undesirable
-# aborts.
-fsck_abort_on_errors="YES"
--- a/conf.d/hwclock
+++ b/conf.d/hwclock
@@ -4,11 +4,9 @@
 # you should set it to "local".
 clock="UTC"

-# If you want the hwclock script to set the system time (software clock)
-# to match the current hardware clock during bootup, leave this
-# commented out.
-# However, you can set this to "NO" if you are running a modern kernel
-# and using NTP to synchronize your system clock.
+# If you want to set the system time to the current hardware clock
+# during bootup, then say "YES" here. You do not need this if you are
+# running a modern kernel with CONFIG_RTC_HCTOSYS set to y.
 #clock_hctosys="YES"

 # If you do not want to set the hardware clock to the current system
--- a/conf.d/keymaps
+++ b/conf.d/keymaps
@@ -18,6 +18,6 @@ extended_keymaps=""
 # For a list of valid sets, run `dumpkeys --help`
 dumpkeys_charset=""

-# Some fonts map AltGr-E to the currency symbol instead of the Euro.
+# Some fonts map AltGr-E to the currency symbol ¤ instead of the Euro €
 # To fix this, set to "yes"
 fix_euro="NO"
--- a/conf.d/localmount
+++ b/conf.d/localmount
@@ -1,9 +1,3 @@
 # Stop the unmounting of certain points.
 # This could be useful for some NFS related work.
 #no_umounts="/dir1:/var/dir2"
-#
-# Ignore errors when mounting local file systems.
-# This should be left alone unless you know what you are doing. If it is
-# set to yes, not only will we allow mount failures, but we will ignore
-# syntax errors in fstab.
-#ignore_mount_errors="NO"
--- a/conf.d/mtab
+++ b/conf.d/mtab
@@ -1,5 +0,0 @@
-# This setting controls whether /etc/mtab is a file or symbolic link.
-# Most of the time, you shouldn't touch this. However, if the default
-# breaks your system in some way, please see the NEWS.md file that comes
-# with OpenRC for the actions to take.
-# mtab_is_file=no
--- a/conf.d/net
+++ b/conf.d/net
@@ -0,0 +1,4 @@
+# This blank configuration will automatically use DHCP for any net.*
+# scripts in /etc/init.d.  To create a more complete configuration,
+# please review /usr/share/doc/openrc*/net.example* and save your configuration
+# in /etc/conf.d/net (this file :]!).
--- a/conf.d/net-online
+++ b/conf.d/net-online
@@ -1,15 +0,0 @@
-# The interfaces setting controls which interfaces the net-online
-# service considers in deciding whether the network is active. By
-# default, it is all ethernet or wireless LAN interfaces.
-#interfaces=""
-
-# This setting controls whether a ping to the default gateway is
-# included in the test for network connectivity after all interfaces
-# are active.
-#ping_default_gateway=no
-
-# The timeout setting controls how long the net-online service waits
-# for the network to be configured.
-# The default is 120 seconds.
-# if this is set to 0, the wait is infinite.
-#timeout=120
--- a/conf.d/netmount
+++ b/conf.d/netmount
@@ -1,40 +0,0 @@
-# You will need to set the dependencies in the netmount script to match
-# the network configuration tools you are using. This should be done in
-# this file by following the examples below, and not by changing the
-# service script itself.
-#
-# Each of these examples is meant to be used separately. So, for
-# example, do not set rc_need to something like "net.eth0 dhcpcd".
-#
-# If you are using newnet and configuring your interfaces with static
-# addresses with the network script, you  should use this setting.
-#
-#rc_need="network"
-#
-# If you are using oldnet, you must list the specific net.* services you
-# need.
-#
-# This example assumes all of your netmounts can be reached on
-# eth0.
-#
-#rc_need="net.eth0"
-#
-# This example assumes some of your netmounts are on eth1 and some
-# are on eth2.
-#
-#rc_need="net.eth1 net.eth2"
-#
-# If you are using a dynamic network management tool like
-# NetworkManager, dhcpcd in standalone mode, wicd, badvpn-ncd, etc, to
-# manage the network interfaces with the routes to your netmounts, you
-# should list that tool.
-#
-#rc_need="NetworkManager"
-#rc_need="dhcpcd"
-#rc_need="wicd"
-#
-# The default setting is designed to be backward compatible with our
-# current setup, but you are highly discouraged from using this. In
-# other words, please change it to be more suited to your system.
-#
-rc_need="net"
--- a/conf.d/network.GNU-kFreeBSD.in
+++ b/conf.d/network.GNU-kFreeBSD.in
@@ -1,4 +0,0 @@
-
-# You can assign a default route
-#defaultroute="192.168.0.1"
-#defaultroute6="2001:a:b:c"
--- a/conf.d/network.GNU.in
+++ b/conf.d/network.GNU.in
@@ -1,4 +0,0 @@
-
-# You can assign a default route
-#defaultroute="gw 192.168.0.1"
-#defaultroute6="gw 2001:a:b:c"
--- a/conf.d/network.in
+++ b/conf.d/network.in
@@ -7,7 +7,7 @@
 # You also have ifup_eth0 and ifdown_eth0 to run other commands when
 # eth0 is started and stopped.
 # You should note that we don't stop the network at system shutdown by default.
-# If you really need this, then set keep_network=NO
+# If you really need this, then set shutdown_network=YES

 # Lastly, the interfaces variable pulls in virtual interfaces that cannot
 # be automatically detected.
--- a/conf.d/staticroute.GNU-kFreeBSD.in
+++ b/conf.d/staticroute.GNU-kFreeBSD.in
@@ -1,5 +0,0 @@
-# Separate multiple routes using ; or new lines.
-
-# Example static routes. See route(8) for syntax.
-#staticroute="net 192.168.0.0 10.73.1.1 netmask 255.255.255.0
-#net 192.168.1.0 10.73.1.1 netmask 255.255.255.0"
--- a/conf.d/staticroute.GNU.in
+++ b/conf.d/staticroute.GNU.in
@@ -1,7 +0,0 @@
-# Separate multiple routes using ; or new lines.
-# /etc/route.conf(5) takes precedence over this configuration.
-
-# Example static routes. See route(8) for syntax.
-# FIXME: "net ..." not supported
-#staticroute="net 192.168.0.0 -netmask 255.255.255.0 --address 10.73.1.1
-#net 192.168.1.0 -netmask 255.255.255.0 --address 10.73.1.1"
--- a/conf.d/tmpfiles
+++ b/conf.d/tmpfiles
@@ -1,3 +0,0 @@
-# Extra options for tmpfiles.sh
-#tmpfiles_opts="--verbose"
-tmpfiles_opts=""
--- a/doc/.gitignore
+++ b/doc/.gitignore
@@ -0,0 +1 @@
+net.example
--- a/doc/Makefile
+++ b/doc/Makefile
@@ -0,0 +1,11 @@
+DIR=	${DOCDIR}/openrc
+SRCS=	net.example.in
+INC=	net.example
+
+MK=	../mk
+include ${MK}/os.mk
+
+%.example.in: %.example${SFX}
+	${CP} $< $@
+
+include ${MK}/scripts.mk
--- a/doc/net.example.BSD.in
+++ b/doc/net.example.BSD.in
@@ -0,0 +1,442 @@
+##############################################################################
+# QUICK-START
+#
+# The quickest start is if you want to use DHCP.
+# In that case, everything should work out of the box, no configuration
+# necessary, though the startup script will warn you that you haven't
+# specified anything.
+
+# WARNING :- some examples have a mixture of IPv4 (ie 192.168.0.1) and IPv6
+# (ie 4321:0:1:2:3:4:567:89ab) internet addresses. They only work if you have
+# the relevant kernel option enabled. So if you don't have an IPv6 enabled
+# kernel then remove the IPv6 address from your config.
+
+# If you want to use a static address or use DHCP explicitly, jump
+# down to the section labeled INTERFACE HANDLERS.
+#
+# If you want to do anything more fancy, you should take the time to
+# read through the rest of this file.
+
+##############################################################################
+# MODULES
+#
+# We now support modular networking scripts which means we can easily
+# add support for new interface types and modules while keeping
+# compatibility with existing ones.
+#
+# Modules load by default if the package they need is installed.  If
+# you specify a module here that doesn't have its package installed
+# then you get an error stating which package you need to install.
+# Ideally, you only use the modules setting when you have two or more
+# packages installed that supply the same service.
+#
+# In other words, you probably should DO NOTHING HERE...
+
+##############################################################################
+# INTERFACE HANDLERS
+
+# For a static configuration, use something like this
+#config_eth0="192.168.0.2/24"
+
+# If you need more than one address, you can use something like this
+# NOTE: ifconfig creates an aliased device for each extra IPv4 address
+#       (eth0:1, eth0:2, etc)
+#       iproute2 does not do this as there is no need to
+#config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
+
+# You can also use IPv6 addresses
+# (you should always specify a prefix length with IPv6 here)
+#config_eth0="192.168.0.2/24 4321:0:1:2:3:4:567:89ab/64 4321:0:1:2:3:4:567:89ac/64"
+
+# If you wish to keep existing addresses + routing and the interface is up,
+# you can specify a noop (no operation). If the interface is down or there
+# are no addresses assigned, then we move onto the next step (default dhcp)
+# This is useful when configuring your interface with a kernel command line
+# or similar
+#config_eth0="noop 192.168.0.2/24"
+
+# If you don't want ANY address (only useful when calling for advanced stuff)
+#config_eth0="null"
+
+# Here's how to do routing if you need it
+# We add an IPv4 default route, IPv4 subnet route and an IPv6 unicast route
+#routes_eth0="default via 192.168.0.1
+#10.0.0.0/8 via 192.168.0.1
+#::/0"
+
+# If a specified module fails (like dhcp - see below), you can specify a
+# fallback like so
+#fallback_eth0="192.168.0.2 netmask 255.255.255.0"
+#fallback_routes_eth0="default via 192.168.0.1"
+
+# NOTE: fallback entry must match the entry location in config_eth0
+# As such you can only have one fallback route.
+# Also, if you do not set a fallback_routes entry for an interface, the
+# routes entry will be used if that is set.
+
+# Some users may need to alter the MTU - here's how
+#mtu_eth0="1500"
+
+# Most drivers that report carrier status function correctly, but some do not
+# One of these faulty drivers is for the Intel e1000 network card, but only
+# at boot time. To get around this you may alter the carrier_timeout value for
+# the interface. -1 is disable, 0 is infinite and any other number of seconds
+# is how long we wait for carrier. The current default is 3 seconds
+#carrier_timeout_eth0=-1
+
+# You may wish to disable the interface being brought down when stopping.
+# This is only of use for WakeOnLan.
+#ifdown_eth0="NO"
+
+##############################################################################
+# OPTIONAL MODULES
+
+#-----------------------------------------------------------------------------
+# WIRELESS (802.11 support)
+# Wireless can be provided by BSDs ifconfig (iwconfig) or wpa_supplicant
+# wpa_supplicant is preferred, use the modules directive to prefer iwconfig.
+#modules="iwconfig"
+
+# ifconfig (iwconig) support is a one shot script - wpa_supplicant is daemon
+# that scans, associates and re-configures if association is lost.
+# We call it iwconfig to separate the wireless setup from ifconfig.
+####################################
+# HINTS
+#
+# Most users will just need to set the following options
+# key_SSID1="s:yourkeyhere enc open" # s: means a text key
+# key_SSID2="aaaa-bbbb-cccc-dd"      # no s: means a hex key
+# preferred_aps="SSID1 SSID2"
+#
+# Clear? Good. Now configure your wireless network below
+
+####################################
+# SETTINGS
+# Hard code an SSID to an interface - leave this unset if you wish the driver
+# to scan for available Access Points
+# I would only set this as a last resort really - use the preferred_aps
+# setting at the bottom of this file
+#essid_eth0='foo'
+
+# Some drivers/hardware don't scan all that well. We have no control over this
+# but we can say how many scans we want to do to try and get a better sweep of
+# the area. The default is 1.
+#scans_eth0="1"
+
+#Channel can be set (1-14), but defaults to 3 if not set.
+#
+# The below is taken verbatim from the BSD wavelan documentation found at
+# http://www.netbsd.org/Documentation/network/wavelan.html
+# There are 14 channels possible; We are told that channels 1-11 are legal for
+# North America, channels 1-13 for most of Europe, channels 10-13 for France,
+# and only channel 14 for Japan. If in doubt, please refer to the documentation
+# that came with your card or access point. Make sure that the channel you
+# select is the same channel your access point (or the other card in an ad-hoc
+# network) is on. The default for cards sold in North America and most of Europe
+# is 3; the default for cards sold in France is 11, and the default for cards
+# sold in Japan is 14.
+#channel_eth0="3"
+
+# Setup any other config commands. This is basically the ifconfig argument
+# without the ifconfig $iface.
+#ifconfig_eth0=""
+# You can do the same per SSID too.
+#ifconfig_SSID=""
+
+# Seconds to wait until associated. The default is to wait 10 seconds.
+# 0 means wait indefinitely. WARNING: this can cause an infinite delay when
+# booting.
+#associate_timeout_eth0="5"
+
+# Define a WEP key per SSID or MAC address (of the AP, not your card)
+# The encryption type (open or restricted) must match the
+# encryption type on the Access Point.
+# To set a hex key, prefix with 0x
+#key_SSID="0x12341234123412341234123456"
+# or you can use strings. Passphrase IS NOT supported
+#key_SSID="foobar"
+#key_SSID="foobar"
+
+# WEP key for the AP with MAC address 001122334455
+#mac_key_001122334455="foobar"
+
+# You can also override the interface settings found in /etc/conf.d/net
+# per SSID - which is very handy if you use different networks a lot
+#config_SSID="dhcp"
+#routes_SSID=
+#fallback_SSID=
+
+# Setting name/domain server causes /etc/resolv.conf to be overwritten
+# Note that if DHCP is used, and you want this to take precedence then
+# please put -R in your dhcpcd options
+#dns_servers_SSID="192.168.0.1 192.168.0.2"
+#dns_domain_SSID="some.domain"
+#dns_search_SSID="search.this.domain search.that.domain"
+# Please check the man page for resolv.conf for more information
+# as domain and search (searchdomains) are mutually exclusive and
+# searchdomains takes precedence
+
+# You can also set any of the /etc/conf.d/net variables per MAC address
+# incase you use Access Points with the same SSID but need different
+# networking configs. Below is an example - of course you use the same
+# method with other variables
+#config_001122334455="dhcp"
+#dns_servers_001122334455="192.168.0.1 192.168.0.2"
+
+# Map a MAC address to an SSID
+# This is used when the Access Point is not broadcasting its SSID
+# WARNING: This will override the SSID being broadcast due to some
+# Access Points sending an SSID even when they have been configured
+# not to!
+# Change 001122334455 to the MAC address and SSID to the SSID
+# it should map to
+#mac_essid_001122334455="SSID"
+
+# This lists the preferred SSIDs to connect to in order
+# SSID's can contain any characters here as they must match the broadcast
+# SSID exactly.
+# Surround each SSID with the " character and separate them with a space
+# If the first SSID isn't found then it moves onto the next
+# If this isn't defined then it connects to the first one found
+#preferred_aps="SSID1 SSID2"
+
+# You can also define a preferred_aps list per interface
+#preferred_aps_eth0="SSID3 SSID4"
+
+# You can also say whether we only connect to preferred APs or not
+# Values are "any", "preferredonly", "forcepreferred", "forcepreferredonly"
+# and "forceany"
+# "any" means it will connect to visible APs in the preferred list and then
+# any other available AP
+# "preferredonly" means it will only connect to visible APs in the preferred
+# list
+# "forcepreferred" means it will forcibly connect to APs in order if it does
+# not find them in a scan
+# "forcepreferredonly" means it forcibly connects to the APs in order and
+# does not bother to scan
+# "forceany" does the same as forcepreferred + connects to any other
+# available AP
+# Default is "any"
+#associate_order="any"
+#associate_order_eth0="any"
+
+# You can define blacklisted Access Points in the same way
+#blacklist_aps="SSID1 SSID2"
+#blacklist_aps_eth0="SSID3 SSID4"
+
+# If you have more than one wireless card, you can say if you want
+# to allow each card to associate with the same Access Point or not
+# Values are "yes" and "no"
+# Default is "yes"
+#unique_ap="yes"
+#unique_ap_eth0="yes"
+
+# IMPORTANT: preferred_only, blacklisted_aps and unique_ap only work when
+# essid_eth0 is not set and your card is capable of scanning
+
+# NOTE: preferred_aps  list ignores blacklisted_aps - so if you have
+# the same SSID in both, well, you're a bit silly :p
+
+##################################################
+# wpa_supplicant
+# emerge net-wireless/wpa_supplicant
+# Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
+# Consult the wpa_supplicant.conf.example that is installed in
+# /usr/share/doc/wpa_supplicant
+
+# By default we don't wait for wpa_supplicant to associate and authenticate.
+# If you would like to, so can specify how long in seconds
+#associate_timeout_eth0=60
+# A value of 0 means wait forever.
+
+# You can also override any settings found here per SSID - which is very
+# handy if you use different networks a lot. See below for using the SSID
+# in our variables
+#config_SSID="dhcp"
+# See the System module below for setting dns/nis/ntp per SSID
+
+# You can also override any settings found here per MAC address of the AP
+# in case you use Access Points with the same SSID but need different
+# networking configs. Below is an example - of course you use the same
+# method with other variables
+#mac_config_001122334455="dhcp"
+#mac_dns_servers_001122334455="192.168.0.1 192.168.0.2"
+
+# When an interface has been associated with an Access Point, a global
+# variable called SSID is set to the Access Point's SSID for use in the
+# pre/post user functions below (although it's not available in preup as you
+# won't have associated then)
+
+# If you're using anything else to configure wireless on your interface AND
+# you have installed wpa_supplicant, you need to disable wpa_supplicant
+#modules="!iwconfig !wpa_supplicant"
+#or
+#modules="!wireless"
+
+##############################################################################
+# WIRELESS SSID IN VARIABLES
+##############################################################################
+# Remember to change SSID to your SSID.
+# Say that your SSID is My NET - the line
+#      #key_SSID="s:passkey"
+# becomes
+#      #key_My_NET="s:passkey"
+# Notice that the space has changed to an underscore - do the same with all
+# characters not in a-z A-Z (English alphabet) 0-9. This only applies to
+# variables and not values.
+#
+# Any SSID's in values like essid_eth0="My NET" may need to be escaped
+# This means placing the character \ before the character
+# \" need to be escaped for example
+# So if your SSID is
+#      My "\ NET
+# it becomes
+#      My \"\\ NET
+# for example
+#      #essid_eth0="My\"\\NET"
+#
+# So using the above we can use
+#      #dns_domain_My____NET="My\"\\NET"
+# which is an invalid dns domain, but shows the how to use the variable
+# structure
+#########################################################
+
+#-----------------------------------------------------------------------------
+# DHCP
+# DHCP can be provided by dhclient.
+#
+# dhcpcd:   emerge net-misc/dhcpcd
+# dhclient: emerge net-misc/dhcp
+
+# Regardless of which DHCP client you prefer, you configure them the
+# same way using one of following depending on which interface modules
+# you're using.
+#config_eth0="dhcp"
+
+# For passing custom options to dhcpcd use something like the following.  This
+# example reduces the timeout for retrieving an address from 60 seconds (the
+# default) to 10 seconds.
+#dhcpcd_eth0="-t 10"
+
+# GENERIC DHCP OPTIONS
+# Set generic DHCP options like so
+#dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
+
+# This tells the dhcp client to release its lease when it stops, not to
+# overwrite dns, ntp and nis settings, not to set a default route and not to
+# send the current hostname to the dhcp server and when it starts.
+# You can use any combination of the above options - the default is not to
+# use any of them.
+
+
+#-----------------------------------------------------------------------------
+# System
+# For configuring system specifics such as domain, dns, ntp and nis servers
+# It's rare that you would need todo this, but you can anyway.
+# This is most benefit to wireless users who don't use DHCP so they can change
+# their configs based on SSID.
+
+# If you omit the _eth0 suffix, then it applies to all interfaces unless
+# overridden by the interface suffix.
+#dns_domain_eth0="your.domain"
+#dns_servers_eth0="192.168.0.2 192.168.0.3"
+#dns_search_eth0="this.domain that.domain"
+#dns_options_eth0="timeout:1 rotate"
+#dns_sortlist_eth0="130.155.160.0/255.255.240.0 130.155.0.0"
+# See the man page for resolv.conf for details about the options and sortlist
+# directives
+
+#ntp_servers_eth0="192.168.0.2 192.168.0.3"
+
+#nis_domain_eth0="domain"
+#nis_servers_eth0="192.168.0.2 192.168.0.3"
+
+# NOTE: Setting any of these will stamp on the files in question. So if you
+# don't specify dns_servers but you do specify dns_domain then no nameservers
+# will be listed in /etc/resolv.conf even if there were any there to start
+# with.
+# If this is an issue for you then maybe you should look into a resolv.conf
+# manager like resolvconf-gentoo to manage this file for you. All packages
+# that baselayout supports use resolvconf-gentoo if installed.
+
+#-----------------------------------------------------------------------------
+# Cable in/out detection
+# Sometimes the cable is in, others it's out. Obviously you don't want to
+# restart net.eth0 every time when you plug it in either.
+# BSD has the Device State Change Daemon - or devd for short
+# To enable this,  simple add devd to the boot runlevel
+#rc-update add devd boot
+#rc
+
+##############################################################################
+# ADVANCED CONFIGURATION
+#
+# Four functions can be defined which will be called surrounding the
+# start/stop operations.  The functions are called with the interface
+# name first so that one function can control multiple adapters. An extra two
+# functions can be defined when an interface fails to start or stop.
+#
+# The return values for the preup and predown functions should be 0
+# (success) to indicate that configuration or deconfiguration of the
+# interface can continue.  If preup returns a non-zero value, then
+# interface configuration will be aborted.  If predown returns a
+# non-zero value, then the interface will not be allowed to continue
+# deconfiguration.
+#
+# The return values for the postup, postdown, failup and faildown functions are
+# ignored since there's nothing to do if they indicate failure.
+#
+# ${IFACE} is set to the interface being brought up/down
+# ${IFVAR} is ${IFACE} converted to variable name bash allows
+#
+# For historical and compatibility reasons, preup is actually normally called
+# in the following sequence: up ; preup ; up.
+# The first up causes the kernel to initialize the device, so
+# that it is available for use in the preup function.  However, for some
+# hardware, e.g. CAN devices, some configuration is needed before trying to up
+# the interface will actually work. For such hardware, the
+# up_before_preup variables will allow skipping the first up call if set
+# to yes.
+#up_before_preup_IFVAR="NO"
+#up_before_preup="NO"
+
+#preup() {
+#	# Remember to return 0 on success
+#	return 0
+#}
+
+#predown() {
+#	# The default in the script is to test for NFS root and disallow
+#	# downing interfaces in that case.  Note that if you specify a
+#	# predown() function you will override that logic.  Here it is, in
+#	# case you still want it...
+#	if is_net_fs /; then
+#		eerror "root filesystem is network mounted -- can't stop ${IFACE}"
+#		return 1
+#	fi
+#
+#	# Remember to return 0 on success
+#	return 0
+#}
+
+#postup() {
+#	# This function could be used, for example, to register with a
+#	# dynamic DNS service.  Another possibility would be to
+#	# send/receive mail once the interface is brought up.
+
+#}
+
+#postdown() {
+#	# Return 0 always
+#	return 0
+#}
+
+#failup() {
+#       # This function is mostly here for completeness... I haven't
+#       # thought of anything nifty to do with it yet ;-)
+#}
+
+#faildown() {
+#       # This function is mostly here for completeness... I haven't
+#       # thought of anything nifty to do with it yet ;-)
+#}
--- a/doc/net.example.Linux.in
+++ b/doc/net.example.Linux.in
--- a/etc/rc.conf.DragonFly
+++ b/etc/rc.conf.DragonFly
@@ -1,13 +0,0 @@
-##############################################################################
-# DragonFly BSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on DragonFly BSD:
-# ""        - nothing special
-# "jail"    - DragonFly BSD jails
-# "prefix"  - Prefix
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-
--- a/etc/rc.conf.FreeBSD
+++ b/etc/rc.conf.FreeBSD
@@ -4,7 +4,6 @@
 # This is the subsystem type. Valid options on FreeBSD:
 # ""        - nothing special
 # "jail"    - FreeBSD jails
-# "prefix"  - Prefix
 # If this is commented out, automatic detection will be used.
 #
 # This should be set to the value representing the environment this file is
--- a/etc/rc.conf.GNU
+++ b/etc/rc.conf.GNU
@@ -1,14 +0,0 @@
-##############################################################################
-# GNU/Hurd SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on GNU/Hurd:
-# ""        - nothing special
-# "subhurd" - Hurd subhurds (to be checked)
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
-# This is the number of tty's used in most of the rc-scripts (like
-# consolefont, numlock, etc ...)
-#rc_tty_number=6?
--- a/etc/rc.conf.GNU-kFreeBSD
+++ b/etc/rc.conf.GNU-kFreeBSD
@@ -1,11 +0,0 @@
-##############################################################################
-# GNU/kFreeBSD SPECIFIC OPTIONS
-
-# This is the subsystem type. Valid options on GNU/kFreeBSD:
-# ""        - nothing special
-# "jail"    - FreeBSD jails (not yet implemented)
-# If this is commented out, automatic detection will be used.
-#
-# This should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-#rc_sys=""
--- a/etc/rc.conf.Linux
+++ b/etc/rc.conf.Linux
@@ -2,17 +2,13 @@
 # LINUX SPECIFIC OPTIONS

 # This is the subsystem type. Valid options on Linux:
-# ""               - nothing special
-# "docker"         - Docker container manager
-# "lxc"            - Linux Containers
-# "openvz"         - Linux OpenVZ
-# "prefix"         - Prefix
-# "rkt"            - CoreOS container management system
-# "uml"            - Usermode Linux
-# "vserver"        - Linux vserver
-# "systemd-nspawn" - Container created by the systemd-nspawn utility
-# "xen0"           - Xen0 Domain
-# "xenU"           - XenU Domain
+# ""        - nothing special
+# "lxc"     - Linux Containers
+# "openvz"  - Linux OpenVZ
+# "uml"     - Usermode Linux
+# "vserver" - Linux vserver
+# "xen0"    - Xen0 Domain
+# "xenU"    - XenU Domain
 # If this is commented out, automatic detection will be used.
 #
 # This should be set to the value representing the environment this file is
@@ -22,69 +18,3 @@
 # This is the number of tty's used in most of the rc-scripts (like
 # consolefont, numlock, etc ...)
 rc_tty_number=12
-
-##############################################################################
-# CGROUPS RESOURCE MANAGEMENT
-
-# If you have cgroups turned on in your kernel, this switch controls
-# whether or not a group for each controller is mounted under
-# /sys/fs/cgroup.
-# None of the other options in this section work if this is set to "NO".
-#rc_controller_cgroups="YES"
-
-# The following settings allow you to set up values for the cgroup
-# controllers for your services.
-# They can be set in this file;, however, if you do this, the settings
-# will apply to all of your services.
-# If you want different settings for each service, place the settings in
-# /etc/conf.d/foo for service foo.
-# The format is to specify the names of the settings followed by their
-# values. Each variable can hold multiple settings.
-# For example, you would use this to set the cpu.shares setting in the
-# cpu controller to 512 for your service.
-# rc_cgroup_cpu="
-# cpu.shares 512
-# "
-#
-#For more information about the adjustments that can be made with
-#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
-
-# Set the blkio controller settings for this service.
-#rc_cgroup_blkio=""
-
-# Set the cpu controller settings for this service.
-#rc_cgroup_cpu=""
-
-# Add this service to the cpuacct controller (any value means yes).
-#rc_cgroup_cpuacct=""
-
-# Set the cpuset controller settings for this service.
-#rc_cgroup_cpuset=""
-
-# Set the devices controller settings for this service.
-#rc_cgroup_devices=""
-
-# Set the hugetlb controller settings for this service.
-#rc_cgroup_hugetlb=""
-
-# Set the memory controller settings for this service.
-#rc_cgroup_memory=""
-
-# Set the net_cls controller settings for this service.
-#rc_cgroup_net_cls=""
-
-# Set the net_prio controller settings for this service.
-#rc_cgroup_net_prio=""
-
-# Set the pids controller settings for this service.
-#rc_cgroup_pids=""
-
-# Set this to YES if yu want all of the processes in a service's cgroup
-# killed when the service is stopped or restarted.
-# This should not be set globally because it kills all of the service's
-# child processes, and most of the time this is undesirable. Please set
-# it in /etc/conf.d/<service>.
-# To perform this cleanup manually for a stopped service, you can
-# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
-# rc-service <service> cgroup_cleanup.
-# rc_cgroup_cleanup="NO"
--- a/etc/rc.conf.NetBSD
+++ b/etc/rc.conf.NetBSD
@@ -3,7 +3,6 @@

 # This is the subsystem type. Valid options on NetBSD:
 # ""        - nothing special
-# "prefix"  - Prefix
 # "xen0"    - Xen0 Domain
 # "xenU"    - XenU Domain
 # If this is commented out, automatic detection will be used.
--- a/etc/rc.conf.in
+++ b/etc/rc.conf.in
@@ -29,20 +29,17 @@
 # come up.
 #rc_depend_strict="YES"

-# rc_hotplug controls which services we allow to be hotplugged.
+# rc_hotplug is a list of services that we allow to be hotplugged.
+# By default we do not allow hotplugging.
 # A hotplugged service is one started by a dynamic dev manager when a matching
 # hardware device is found.
-# Hotplugged services appear in the "hotplugged" runlevel.
-# If rc_hotplug is set to any value, we compare the name of this service
-# to every pattern in the value, from left to right, and we allow the
-# service to be hotplugged if it matches a pattern, or if it matches no
-# patterns. Patterns can include shell wildcards.
-# To disable services from being hotplugged, prefix patterns with "!".
-#If rc_hotplug is not set or is empty, all hotplugging is disabled.
+# This service is intrinsically included in the boot runlevel.
+# To disable services, prefix with a !
 # Example - rc_hotplug="net.wlan !net.*"
-# This allows net.wlan and any service not matching net.* to be hotplugged.
-# Example - rc_hotplug="!net.*"
-# This allows services that do not match "net.*" to be hotplugged.
+# This allows net.wlan and any service not matching net.* to be plugged.
+# Example - rc_hotplug="*"
+# This allows all services to be hotplugged
+#rc_hotplug="*"

 # rc_logger launches a logging daemon to log the entire rc process to
 # /var/log/rc.log
@@ -54,10 +51,6 @@
 # The default value is: /var/log/rc.log
 #rc_log_path="/var/log/rc.log"

-# If you want verbose output for OpenRC, set this to yes. If you want
-# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
-#rc_verbose=no
-
 # By default we filter the environment for our running scripts. To allow other
 # variables through, add them here. Use a * to allow all variables through.
 #rc_env_allow="VAR1 VAR2"
@@ -80,10 +73,6 @@
 #rc_crashed_stop=NO
 #rc_crashed_start=YES

-# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
-# output.
-#rc_nocolor=NO
-
 ##############################################################################
 # MISC CONFIGURATION VARIABLES
 # There variables are shared between many init scripts
@@ -91,13 +80,9 @@
 # Set unicode to YES to turn on unicode support for keyboards and screens.
 #unicode="NO"

-# This is how long fuser should wait for a remote server to respond. The
-# default is 60 seconds, but  it can be adjusted here.
-#rc_fuser_timeout=60
-
 # Below is the default list of network fstypes.
 #
-# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
 # nfs nfs4 ocfs2 shfs smbfs
 #
 # If you would like to add to this list, you can do so by adding your
@@ -109,19 +94,12 @@
 # These variables are documented here, but should be configured in
 # /etc/conf.d/foo for service foo and NOT enabled here unless you
 # really want them to work on a global basis.
-# If your service has characters in its name which are not legal in
-# shell variable names and you configure the variables for it in this
-# file, those characters should be replaced with underscores in the
-# variable names as shown below.

 # Some daemons are started and stopped via start-stop-daemon.
 # We can set some things on a per service basis, like the nicelevel.
-#SSD_NICELEVEL="-19"
+#export SSD_NICELEVEL="-19"

 # Pass ulimit parameters
-# If you are using bash in POSIX mode for your shell, note that the
-# ulimit command uses a block size of 512 bytes for the -c and -f
-# options
 #rc_ulimit="-u 30"

 # It's possible to define extra dependencies for services like so
@@ -138,13 +116,6 @@
 #rc_foo_need="openvpn"
 #rc_foo_after="clock"

-# Below is an example for service foo-bar. Note that the '-' is illegal
-# in a shell variable name, so we convert it to an underscore.
-# example for service foo-bar.
-#rc_foo_bar_config="/etc/foo-bar"
-#rc_foo_bar_need="openvpn"
-#rc_foo_bar_after="clock"
-
 # You can also remove dependencies.
 # This is mainly used for saying which servies do NOT provide net.
 #rc_net_tap0_provide="!net"
--- a/etc/rc.devd
+++ b/etc/rc.devd
@@ -1,18 +1,10 @@
 #!/bin/sh
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-#    except according to the terms contained in the LICENSE file.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 # Inform RC that we are in the background and hotplugged
-IN_BACKGROUND=yes
-IN_HOTPLUG=yes
-export IN_BACKGROUND IN_HOTPLUG
+export IN_BACKGROUND=yes
+export IN_HOTPLUG=yes

 getmedia() {
 	ifconfig "$1" | while read line; do
--- a/etc/rc.in
+++ b/etc/rc.in
@@ -1,25 +1,18 @@
 #!@SHELL@
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-#    except according to the terms contained in the LICENSE file.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)
-[ -z "$TERM" -o "$TERM" = "dumb" ] && TERM="@TERM@" && export TERM
+[ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@"

 # Handle interrupts
 trap : SIGINT
 trap "echo 'Boot interrupted'; exit 1" SIGQUIT

-/sbin/openrc sysinit || exit 1
-/sbin/openrc boot || exit 1
-/sbin/openrc default
+/sbin/rc sysinit || exit 1
+/sbin/rc boot || exit 1
+/sbin/rc default

 # We don't actually care if rc default worked or not, we should exit 0
 # to allow logins
--- a/etc/rc.shutdown.in
+++ b/etc/rc.shutdown.in
@@ -1,24 +1,17 @@
 #!@SHELL@
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-#    except according to the terms contained in the LICENSE file.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 # Handle interrupts
 trap : SIGINT SIGQUIT

 # Try and use stuff in /lib over anywhere else so we can shutdown
 # local mounts correctly.
-LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}" ; export LD_LIBRARY_PATH
+export LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}"

 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)
-[ -z "$TERM" -o "$TERM" = "dumb" ] && TERM="@TERM@" && export TERM
+[ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@"

 action=${1:-shutdown}
-exec /sbin/openrc "${action}"
+exec /sbin/rc "${action}"
--- a/init.d.misc/avahi-dnsconfd.in
+++ b/init.d.misc/avahi-dnsconfd.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 command=@PKG_PREFIX@/sbin/avahi-dnsconfd
 command_args="$avahi_dnsconfd_args -D"
--- a/init.d.misc/avahid.in
+++ b/init.d.misc/avahid.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 command=@PKG_PREFIX@/sbin/avahi-daemon
 command_args="$avahid_args -D"
--- a/init.d.misc/dbus.in
+++ b/init.d.misc/dbus.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 command=@PKG_PREFIX@/bin/dbus-daemon
 pidfile=@VARBASE@/run/dbus/pid
--- a/init.d.misc/dhcpcd.in
+++ b/init.d.misc/dhcpcd.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 command=/sbin/dhcpcd
 pidfile=/var/run/dhcpcd.pid
--- a/init.d.misc/dnsmasq.in
+++ b/init.d.misc/dnsmasq.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 command=@PKG_PREFIX@/sbin/dnsmasq
 command_args=$dnsmasq_args
--- a/init.d.misc/hald.in
+++ b/init.d.misc/hald.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 command=@PKG_PREFIX@/sbin/hald
 pidfile=@VARBASE@/run/hald/hald.pid
--- a/init.d.misc/named.in
+++ b/init.d.misc/named.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 command=/usr/sbin/named
 command_args=$named_args
--- a/init.d.misc/ntpd.in
+++ b/init.d.misc/ntpd.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 : ${ntpd_config:=/etc/ntp.conf}
 : ${ntpd_drift:=/var/db/ntpd.drift}
--- a/init.d.misc/openvpn.in
+++ b/init.d.misc/openvpn.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 vpn=${RC_SVCNAME#*.}
 name="OpenVPN"
@@ -60,7 +53,7 @@ start_pre()
 			eend $?
 		fi
 	else
-		if command -v kldload >/dev/null 2>&1; then
+		if type kldload >/dev/null 2>&1; then
 			# Hammer the modules home by default
 			sysctl -a | grep -q '\.tun\.' || kldload if_tun
 			sysctl -a | grep -q '\.tap\.' || kldload if_tap
--- a/init.d.misc/polkitd.in
+++ b/init.d.misc/polkitd.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 command=@PKG_PREFIX@/sbin/polkitd
 pidfile=@VARBASE@/run/polkitd/polkitd.pid
--- a/init.d.misc/sshd.in
+++ b/init.d.misc/sshd.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 command=/usr/sbin/sshd
 command_args=$sshd_args
--- a/init.d.misc/wpa_supplicant.in
+++ b/init.d.misc/wpa_supplicant.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 command=/usr/sbin/wpa_supplicant
 : ${wpa_supplicant_conf:=/etc/wpa_supplicant.conf}
--- a/init.d/.gitignore
+++ b/init.d/.gitignore
@@ -1,11 +1,11 @@
-binfmt
 bootmisc
 fsck
 hostname
 local
 localmount
-loopback
 moused
+net.lo
+net.lo0
 netmount
 network
 root
@@ -23,11 +23,8 @@ killprocs
 modules
 mount-ro
 mtab
-net-online
 numlock
-osclock
 procfs
-s6-svscan
 staticroute
 sysfs
 devdb
@@ -44,5 +41,3 @@ syslogd
 termencoding
 ttys
 wscons
-tmpfiles.dev
-tmpfiles.setup
--- a/init.d/Makefile
+++ b/init.d/Makefile
@@ -1,30 +1,30 @@
-include ../mk/net.mk
-
 DIR=	${INITDIR}
-SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in loopback.in \
-	netmount.in osclock.in root.in savecache.in swap.in swapfiles.in \
-	tmpfiles.setup.in swclock.in sysctl.in urandom.in s6-svscan.in ${SRCS-${OS}}
+SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
+	network.in root.in savecache.in staticroute.in swap.in swapfiles.in \
+	swclock.in sysctl.in urandom.in ${SRCS-${OS}}
 BIN=	${OBJS}

-# Are we installing our network scripts?
-ifeq (${MKNET},yes)
-SRCS+= network.in staticroute.in
-endif
+INSTALLAFTER=	_installafter_net.lo
+CLEANFILES+=	net.lo
+TARGETS+=	net.lo

 MK=	../mk
 include ${MK}/os.mk

+NET_LO-FreeBSD=	net.lo0
 # Generic BSD scripts
 SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 		rpcbind.in savecore.in syslogd.in
 # These are FreeBSD specific
-SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in encswap.in ipfw.in \
-		mixer.in nscd.in powerd.in syscons.in
+SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in ipfw.in mixer.in nscd.in \
+		powerd.in syscons.in

-SRCS-Linux=	binfmt.in devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
+NET_LO-Linux=	net.lo
+SRCS-Linux=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
 		killprocs.in modules.in mount-ro.in mtab.in numlock.in \
-		procfs.in net-online.in sysfs.in termencoding.in tmpfiles.dev.in
+		procfs.in sysfs.in termencoding.in

+NET_LO-NetBSD=	net.lo0
 # Generic BSD scripts
 SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 		rpcbind.in savecore.in syslogd.in
@@ -37,3 +37,6 @@ SRCS-NetBSD+=	devdb.in swap-blk.in ttys.in wscons.in
 include ${MK}/scripts.mk

 _installafter_: realinstall
+
+_installafter_net.lo: realinstall
+	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO-${OS}}
--- a/init.d/adjkerntz.in
+++ b/init.d/adjkerntz.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 extra_commands="save"

@@ -29,7 +22,7 @@ depend()
 	   [ "$clock" != "UTC" -a ! -e /etc/wall_cmos_clock ]; then
 		need root
 	fi
-	keyword -jail -prefix
+	keyword -jail
 }

 start()
--- a/init.d/binfmt.in
+++ b/init.d/binfmt.in
@@ -1,27 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Register misc binary format handlers"
-
-depend()
-{
-	after procfs
-	use modules devfs
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
-}
-
-start()
-{
-	ebegin "Loading custom binary format handlers"
-	"$RC_LIBEXECDIR"/sh/binfmt.sh
-	eend $?
-	return 0
-}
--- a/init.d/bootmisc.in
+++ b/init.d/bootmisc.in
@@ -1,20 +1,13 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 depend()
 {
 	need localmount
 	before logger
-	after clock root sysctl
-	keyword -prefix -timeout
+	after clock sysctl
+	keyword -timeout
 }

 : ${wipe_tmp:=${WIPE_TMP:-yes}}
@@ -34,9 +27,9 @@ cleanup_tmp_dir()
 		ebegin "Wiping $dir directory"

 		# Faster than raw find
-		if ! rm -rf -- [!ajlq\.]* 2>/dev/null ; then
+		if ! rm -rf -- [^ajlq\.]* 2>/dev/null ; then
 			# Blah, too many files
-			find . -maxdepth 1 -name '[!ajlq\.]*' -exec rm -rf -- {} +
+			find . -maxdepth 1 -name '[^ajlq\.]*' -exec rm -rf -- {} +
 		fi

 		# pam_mktemp creates a .private directory within which
@@ -66,34 +59,6 @@ cleanup_tmp_dir()
 	fi
 }

-cleanup_var_run_dir()
-{
-	ebegin "Cleaning /var/run"
-	for x in $(find /var/run ! -type d ! -name utmp \
-		! -name random-seed ! -name dev.db \
-		! -name ld-elf.so.hints ! -name ld.so.hints);
-	do
-		# Clean stale sockets
-		if [ -S "$x" ]; then
-			if command -v fuser >/dev/null 2>&1; then
-				fuser "$x" >/dev/null 2>&1 || rm -- "$x"
-			else
-				rm -- "$x"
-			fi
-		fi
-		[ ! -f "$x" ] && continue
-		# Do not remove pidfiles of already running daemons
-		case "$x" in
-			*.pid)
-				start-stop-daemon --test --quiet \
-				--stop --pidfile "$x" && continue
-			;;
-		esac
-		rm -f -- "$x"
-	done
-	eend 0
-}
-
 mkutmp()
 {
 	: >"$1"
@@ -122,43 +87,10 @@ migrate_to_run()
 	fi
 }

-clean_run()
-{
-	[ "$RC_SYS" = VSERVER -o "$RC_SYS" = LXC ] && return 0
-	local dir
-	# If / is still read-only due to a problem, this will fail!
-	if ! checkpath -W /; then
-		ewarn "/ is not writable; unable to clean up underlying /run"
-		return 1
-	fi
-	if ! checkpath -W /tmp; then
-		ewarn "/tmp is not writable; unable to clean up underlying /run"
-		return 1
-	fi
-	# Now we know that we can modify /tmp and /
-	# if mktemp -d fails, it returns an EMPTY string
-	# STDERR: mktemp: failed to create directory via template ‘/tmp/tmp.XXXXXXXXXX’: Read-only file system
-	# STDOUT: ''
-	rc=0
-	dir=$(mktemp -d)
-	if [ -n "$dir" -a -d $dir -a -w $dir ]; then
-		mount --bind / $dir && rm -rf $dir/run/* || rc=1
-		umount $dir && rmdir $dir
-	else
-		rc=1
-	fi
-	if [ $rc -ne 0 ]; then
-		ewarn "Could not clean up underlying /run on /"
-		return 1
-	fi
-}
-
 start()
 {
 	# Remove any added console dirs
-	if checkpath -W "$RC_LIBEXECDIR"; then
-		rm -rf "$RC_LIBEXECDIR"/console/*
-	fi
+	rm -rf "$RC_LIBEXECDIR"/console/*

 	local logw=false runw=false extra=
 	# Ensure that our basic dirs exist
@@ -180,10 +112,9 @@ start()
 		fi
 	done

-	if [ "$RC_UNAME" = Linux -a -d /run ]; then
+	if [ "$RC_UNAME" = Linux -a -d /run ] && false; then
 		migrate_to_run	/var/lock /run/lock
 		migrate_to_run	/var/run /run
-		clean_run
 	fi

 	if checkpath -W /var/run; then
@@ -196,13 +127,36 @@ start()
 		[ -e /var/log/wtmp ] || mkutmp /var/log/wtmp
 		eend 0

-		mountinfo -q -f tmpfs /var/run || cleanup_var_run_dir
+		ebegin "Cleaning /var/run"
+		for x in $(find /var/run ! -type d ! -name utmp \
+			! -name random-seed ! -name dev.db \
+			! -name ld-elf.so.hints ! -name ld.so.hints);
+		do
+			# Clean stale sockets
+			if [ -S "$x" ]; then
+				if type fuser >/dev/null 2>&1; then
+					fuser "$x" >/dev/null 2>&1 || rm -- "$x"
+				else
+					rm -- "$x"
+				fi
+			fi
+			[ ! -f "$x" ] && continue
+			# Do not remove pidfiles of already running daemons
+			case "$x" in
+				*.pid)
+					start-stop-daemon --test --quiet \
+					--stop --pidfile "$x" && continue
+				;;
+			esac
+			rm -f -- "$x"
+		done
+		eend 0
 	fi

 	# Clean up /tmp directories
 	local tmp=
 	for tmp in ${clean_tmp_dirs:-${wipe_tmp_dirs-/tmp}}; do
-		mountinfo -q -f tmpfs "$tmp" || cleanup_tmp_dir "$tmp"
+		cleanup_tmp_dir "$tmp"
 	done

 	if checkpath -W /tmp; then
@@ -220,16 +174,10 @@ start()
 	if yesno $log_dmesg; then
 		if $logw || checkpath -W /var/log; then
 			# Create an 'after-boot' dmesg log
-			case "$RC_SYS" in
-				VSERVER|OPENVZ|LXC|SYSTEMD-NSPAWN) ;;
-				*)
-					if yesno ${previous_dmesg:-no}; then
-						mv /var/log/dmesg /var/log/dmesg.old
-					fi
-					dmesg > /var/log/dmesg
-					chmod 640 /var/log/dmesg
-					;;
-			esac
+			if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ ]; then
+				dmesg > /var/log/dmesg
+				chmod 640 /var/log/dmesg
+			fi
 		fi
 	fi

@@ -248,5 +196,3 @@ stop()

 	return 0
 }
-
-# vim: ft=sh
--- a/init.d/consolefont.in
+++ b/init.d/consolefont.in
@@ -1,21 +1,14 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 description="Sets a font for the consoles."

 depend()
 {
 	need localmount termencoding
-	after hotplug bootmisc modules
-	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+	after hotplug bootmisc
+	keyword -openvz -uml -vserver -xenu -lxc
 }

 start()
@@ -60,10 +53,14 @@ start()
 	done
 	eend $retval

-	# Store the font so we can use it ASAP on boot
+	# Store the last font so we can use it ASAP on boot
 	if [ $retval -eq 0 ] && checkpath -W "$RC_LIBEXECDIR"; then
 		mkdir -p "$RC_LIBEXECDIR"/console
-		setfont -O "$RC_LIBEXECDIR"/console/font
+		for font in /usr/share/consolefonts/"$consolefont".*; do
+			:
+		done
+		cp "$font" "$RC_LIBEXECDIR"/console
+		echo "${font##*/}" >"$RC_LIBEXECDIR"/console/font
 	fi

 	return $retval
--- a/init.d/devd.in
+++ b/init.d/devd.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 command=/sbin/devd
 command_args=$devd_args
@@ -17,7 +10,7 @@ depend() {
 	need localmount
 	after bootmisc
 	before net.lo0
-	keyword -jail -prefix
+	keyword -jail
 }

 start_pre() {
--- a/init.d/devdb.in
+++ b/init.d/devdb.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2008-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 description="Creates the dev database"

--- a/init.d/devfs.in
+++ b/init.d/devfs.in
@@ -1,93 +1,19 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

-description="Set up the /dev directory"
+description="Mount system critical filesystems in /dev."

-depend()
-{
-	provide dev-mount
-	before dev
-	keyword -prefix -systemd-nspawn -vserver -lxc
+depend() {
+	use dev
+	keyword -vserver
 }

-mount_dev()
-{
-	local action=--mount devfstype msg=Mounting
-	# Some devices require exec, Bug #92921
-	local mountopts="exec,nosuid,mode=0755"
-	if yesno ${skip_mount_dev:-no} ; then
-		einfo "/dev will not be mounted due to user request"
-		return 0
-	fi
-	if mountinfo -q /dev; then
-		action=--remount
-		mountopts="remount,$mountopts"
-		msg=Remounting
-	fi
-	if fstabinfo -q /dev; then
-		ebegin "$msg /dev according to @SYSCONFDIR@/fstab"
-		fstabinfo -q $action /dev
-		eend $?
-		return 0
-	fi
-	if grep -q devtmpfs /proc/filesystems; then
-		devfstype=devtmpfs
-		mountopts="$mountopts,size=10M"
-	elif grep -q tmpfs /proc/filesystems; then
-		devfstype=tmpfs
-		mountopts="$mountopts,size=10M"
-	fi
-	if [ -n "$devfstype" ]; then
-		ebegin "$msg $devfstype on /dev"
-		mount -n -t $devfstype -o $mountopts dev /dev
-		eend $?
-	else
-		ewarn "This kernel does not have devtmpfs or tmpfs support, and there"
-		ewarn "is no entry for /dev in fstab."
-		ewarn "This means /dev will not be mounted."
-		ewarn "To avoid this message, set CONFIG_DEVTMPFS or CONFIG_TMPFS to y"
-		ewarn "in your kernel configuration or see @SYSCONFDIR@/conf.d/devfs"
-	fi
-	return 0
-}
-
-seed_dev()
-{
-	# Seed /dev with some things that we know we need
-
-	# creating /dev/console, /dev/tty and /dev/tty1 to be able to write
-	# to $CONSOLE with/without bootsplash before udevd creates it
-	[ -c /dev/console ] || mknod -m 600 /dev/console c 5 1
-	[ -c /dev/tty1 ] || mknod -m 620 /dev/tty1 c 4 1
-	[ -c /dev/tty ] || mknod -m 666 /dev/tty c 5 0
-
-	# udevd will dup its stdin/stdout/stderr to /dev/null
-	# and we do not want a file which gets buffered in ram
-	[ -c /dev/null ] || mknod -m 666 /dev/null c 1 3
-
-	# so udev can add its start-message to dmesg
-	[ -c /dev/kmsg ] || mknod -m 660 /dev/kmsg c 1 11
-
-	# extra symbolic links not provided by default
-	[ -e /dev/fd ] || ln -snf /proc/self/fd /dev/fd
-	[ -e /dev/stdin ] || ln -snf /proc/self/fd/0 /dev/stdin
-	[ -e /dev/stdout ] || ln -snf /proc/self/fd/1 /dev/stdout
-	[ -e /dev/stderr ] || ln -snf /proc/self/fd/2 /dev/stderr
-	[ -e /proc/kcore ] && ln -snf /proc/kcore /dev/core
-
-	# Mount required directories as user may not have them in /etc/fstab
+start() {
+	# Mount required stuff as user may not have then in /etc/fstab
 	for x in \
-		"mqueue /dev/mqueue 1777 ,nodev mqueue" \
 		"devpts /dev/pts 0755 ,gid=5,mode=0620 devpts" \
-		"tmpfs /dev/shm 1777 ,nodev,mode=1777 shm" \
+		"tmpfs /dev/shm 1777 ,nodev shm" \
 	; do
 		set -- $x
 		grep -Eq "[[:space:]]+$1$" /proc/filesystems || continue
@@ -106,23 +32,5 @@ seed_dev()
 			eend $?
 		fi
 	done
-}
-
-restorecon_dev()
-{
-	if [ -x /sbin/restorecon ]; then
-		ebegin "Restoring SELinux contexts in /dev"
-		restorecon -rF /dev >/dev/null 2>&1
-		eend $?
-	fi
-
-	return 0
-}
-
-start()
-{
-	mount_dev
-	seed_dev
-	restorecon_dev
 	return 0
 }
--- a/init.d/dmesg.in
+++ b/init.d/dmesg.in
@@ -1,20 +1,13 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 description="Set the dmesg level for a cleaner boot"

 depend()
 {
 	before dev modules
-	keyword -lxc -prefix -systemd-nspawn -vserver
+	keyword -vserver
 }

 start()
--- a/init.d/dumpon.in
+++ b/init.d/dumpon.in
@@ -1,19 +1,12 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 description="Configures a specific kernel dump device."

 depend() {
 	need swap
-	keyword -jail -prefix
+	keyword -jail
 }

 start() {
--- a/init.d/encswap.in
+++ b/init.d/encswap.in
@@ -1,43 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright 1992-2012 FreeBSD Project
-# Released under the 2-clause BSD license
-
-depend() {
-	before swap
-}
-
-start() {
-	while read device mountpoint type options rest ; do
-		case ":${device}:${type}:${options}" in
-		:#*)
-			;;
-		*.bde:swap:sw)
-			passphrase=$(dd if=/dev/random count=1 2>/dev/null | md5 -q)
-			device="${device%.bde}"
-			gbde init "${device}" -P "${passphrase}" || return 1
-			gbde attach "${device}" -p "${passphrase}" || return 1
-			;;
-		*.eli:swap:sw)
-			device="${device%.eli}"
-			geli onetime ${geli_swap_flags} "${device}" || return 1
-			;;
-		esac
-	done < /etc/fstab
-}
-
-stop() {
-	while read device mountpoint type options rest ; do
-		case ":${device}:${type}:${options}" in
-		:#*)
-			;;
-		*.bde:swap:sw)
-			device="${device%.bde}"
-			gbde detach "${device}"
-			;;
-		*.eli:swap:sw)
-			# Nothing here, because geli swap devices should be
-			# created with the auto-detach-on-last-close option.
-			;;
-		esac
-	done < /etc/fstab
-}
--- a/init.d/fsck.in
+++ b/init.d/fsck.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 description="Check and repair filesystems according to /etc/fstab"
 _IFS="
@@ -16,11 +9,11 @@ _IFS="
 depend()
 {
 	use dev clock modules
-	keyword -jail -openvz -prefix -systemd-nspawn -timeout -vserver -lxc -uml
+	keyword -jail -openvz -timeout -vserver -lxc
 }

 _abort() {
-	yesno ${fsck_abort_on_errors:-yes} && rc-abort
+	rc-abort
 	return 1
 }

@@ -78,12 +71,9 @@ start()
 	done

 	if [ "$RC_UNAME" = Linux ]; then
-		local skiptypes
-		skiptypes=$(printf 'no%s,' ${net_fs_list} ${extra_net_fs_list})
-		[ "${skiptypes}" = "no," ] && skiptypes=""
-		fsck_opts="$fsck_opts -C0 -T -t ${skiptypes}noopts=_netdev"
+		fsck_opts="$fsck_opts -C0 -T"
 		if [ -z "$fsck_passno" -a -z "$fsck_mnt" ]; then
-			fsck_args=${fsck_args:--A -p}
+			fsck_args=${fsck_args--A -p}
 			if echo 2>/dev/null >/.test.$$; then
 				rm -f /.test.$$
 				fsck_opts="$fsck_opts -R"
@@ -92,7 +82,7 @@ start()
 	fi

 	trap : INT QUIT
-	fsck ${fsck_args:--p} $fsck_opts "$@"
+	fsck ${fsck_args--p} $fsck_opts "$@"
 	case $? in
 	0)	eend 0; return 0;;
 	1)	ewend 1 "Filesystems repaired"; return 0;;
--- a/init.d/hostid.in
+++ b/init.d/hostid.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 extra_commands="reset"
 : ${hostid_file:=/etc/hostid}
@@ -16,7 +9,7 @@ depend()
 {
 	use root
 	before devd net
-	keyword -jail -prefix
+	keyword -jail
 }

 _set()
@@ -47,7 +40,7 @@ reset()
 {
 	local uuid= x="[0-9a-f]" y="$x$x$x$x"

-	if command -v kenv >/dev/null 2>&1; then
+	if type kenv >/dev/null 2>&1; then
 		uuid=$(kenv smbios.system.uuid 2>/dev/null)
 	fi
 	case "$uuid" in
--- a/init.d/hostname.in
+++ b/init.d/hostname.in
@@ -1,25 +1,16 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 description="Sets the hostname of the machine."

 depend() {
-	keyword -prefix -systemd-nspawn -lxc
+	keyword -lxc
 }

 start()
 {
-	# HOSTNAME variable used to be defined in caps in conf.d/hostname.
-	# It is also a magic variable in bash.
-	hostname=${hostname-${HOSTNAME-localhost}} # checkbashisms: false positive
+	hostname=${hostname-${HOSTNAME-localhost}}
 	ebegin "Setting hostname to $hostname"
 	hostname "$hostname"
 	eend $? "Failed to set the hostname"
--- a/init.d/hwclock.in
+++ b/init.d/hwclock.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 extra_commands="save show"

@@ -35,7 +28,7 @@ depend()
 	else
 		before *
 	fi
-	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+	keyword -openvz -uml -vserver -xenu -lxc
 }

 setupopts()
@@ -90,17 +83,22 @@ start()
 		fi
 	fi

-	# Always set the kernel's time zone.
-	_hwclock --systz $utc_cmd $clock_args
-	: $(( retval += $? ))
-
 	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
 		_hwclock --adjust $utc_cmd
 		: $(( retval += $? ))
 	fi

-	if yesno ${clock_hctosys:-YES}; then
-		_hwclock --hctosys $utc_cmd $clock_args
+	# If setting UTC, don't bother to run hwclock when first booting
+	# as that's the default
+	if [ "$PREVLEVEL" != N -o \
+		"$utc_cmd" != --utc -o \
+		-n "$clock_args" ];
+	then
+		if yesno ${clock_hctosys:-YES}; then
+			_hwclock --hctosys $utc_cmd $clock_args
+		else
+			_hwclock --systz $utc_cmd $clock_args
+		fi
 		: $(( retval += $? ))
 	fi

--- a/init.d/ipfw.in
+++ b/init.d/ipfw.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 # This is based on /etc/rc.firewall and /etc/rc.firewall6 from FreeBSD

@@ -15,7 +8,7 @@ ipfw_ip_in=${ipfw_ip_in-any}
 ipfw_ports_in=${ipfw_ports_in-auth ssh}
 ipfw_ports_nolog=${ipfw_ports_nolog-135-139,445 1026,1027 1433,1434}

-extra_commands="panic showstatus"
+opts="panic showstatus"

 depend() {
 	before net
--- a/init.d/keymaps.in
+++ b/init.d/keymaps.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 description="Applies a keymap for the consoles."

@@ -15,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after bootmisc
-	keyword -openvz -prefix -systemd-nspawn -uml -vserver -xenu -lxc
+	keyword -openvz -uml -vserver -xenu -lxc
 }

 start()
@@ -65,7 +58,7 @@ start()
 	if yesno $fix_euro; then
 		ebegin "Fixing font for euro symbol"
 		# Fix some fonts displaying the Euro, #173528.
-		echo "altgr keycode 18 = U+20AC" | loadkeys -q -
+		echo "altgr keycode 18 = U+20AC" | loadkeys -q
 		eend $?
 	fi

--- a/init.d/killprocs.in
+++ b/init.d/killprocs.in
@@ -1,21 +1,9 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 description="Kill all processes so we can unmount disks cleanly."

-depend()
-{
-	keyword -prefix
-}
-
 start()
 {
 	ebegin "Terminating remaining processes"
--- a/init.d/local.in
+++ b/init.d/local.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 description="Executes user programs in @SYSCONFDIR@/local.d"

@@ -19,75 +12,40 @@ depend()

 start()
 {
-	ebegin "Starting local"
+	einfo "Starting local"

-	local file has_errors=0 redirect retval
-	yesno $rc_verbose || redirect='> /dev/null 2>&1'
-	eindent
-	for file in @SYSCONFDIR@/local.d/*.start; do
-		if [ -x "${file}" ]; then
-			vebegin "Executing \"${file}\""
-			eval "${file}" $redirect
-			retval=$?
-			if [ ${retval} -ne 0 ]; then
-				has_errors=1
-			fi
-			veend ${retval} "Execution of \"${file}\" failed."
-		fi
+	local file
+	for file in @SYSCONFDIR@/local.d/*.start ; do
+		[ -x "$file" ] && "$file"
 	done
-	eoutdent

-	if command -v local_start >/dev/null 2>&1; then
-		ewarn "\"@SYSCONFDIR@/conf.d/local\" should be removed."
+	if type local_start >/dev/null 2>&1; then
+		ewarn "@SYSCONFDIR@/conf.d/local should be removed."
 		ewarn "Please move the code from the local_start function"
-		ewarn "to executable scripts with an .start extension"
-		ewarn "in \"@SYSCONFDIR@/local.d\""
+		ewarn "to scripts with an .start extension"
+		ewarn "in @SYSCONFDIR@/local.d"
 		local_start
 	fi

-	eend ${has_errors}
-
-	# We have to end with a zero exit code, because a failed execution
-	# of an executable @SYSCONFDIR@/local.d/*.start file shouldn't result in
-	# marking the local service as failed. Otherwise we are unable to
-	# execute any executable @SYSCONFDIR@/local.d/*.stop file, because a failed
-	# marked service cannot be stopped (and the stop function would
-	# actually call the executable @SYSCONFDIR@/local.d/*.stop file(s)).
-	return 0
+	eend 0
 }

 stop()
 {
-	ebegin "Stopping local"
+	einfo "Stopping local"

-	local file has_errors=0 redirect retval
-	yesno $rc_verbose || redirect='> /dev/null 2>&1'
-	eindent
+	local file
 	for file in @SYSCONFDIR@/local.d/*.stop; do
-		if [ -x "${file}" ]; then
-			vebegin "Executing \"${file}\""
-			eval "${file}" $redirect
-			retval=$?
-			if [ ${retval} -ne 0 ]; then
-				has_errors=1
-			fi
-			veend ${retval} "Execution of \"${file}\" failed."
-		fi
+		[ -x "$file" ] && "$file"
 	done
-	eoutdent

-	if command -v local_stop >/dev/null 2>&1; then
-		ewarn "\"@SYSCONFDIR@/conf.d/local\" should be removed."
+	if type local_start >/dev/null 2>&1; then
+		ewarn "@SYSCONFDIR@/conf.d/local should be removed."
 		ewarn "Please move the code from the local_stop function"
-		ewarn "to executable scripts with an .stop extension"
-		ewarn "in \"@SYSCONFDIR@/local.d\""
+		ewarn "to scripts with an .stop extension"
+		ewarn "in @SYSCONFDIR@/local.d"
 		local_stop
 	fi

-	eend ${has_errors}
-
-	# An executable @SYSCONFDIR@/local.d/*.stop file which failed with a
-	# non-zero exit status is not a reason to mark this service
-	# as failed, therefore we have to end with a zero exit code.
-	return 0
+	eend 0
 }
--- a/init.d/localmount.in
+++ b/init.d/localmount.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 description="Mounts disks and swap according to /etc/fstab."

@@ -16,45 +9,34 @@ depend()
 	need fsck
 	use lvm modules mtab
 	after lvm modules
-	keyword -jail -prefix -systemd-nspawn -vserver -lxc
+	keyword -jail -openvz -vserver -lxc
 }

 start()
 {
 	# Mount local filesystems in /etc/fstab.
-	local types="noproc" x= no_netdev= rc=
+	local types="noproc" x= no_netdev=
 	for x in $net_fs_list $extra_net_fs_list; do
-		types="${types},no${x}"
+		types="${types},${x}"
 	done

 	if [ "$RC_UNAME" = Linux ]; then
 		no_netdev="-O no_netdev"
-		if mountinfo -q /usr; then
-			touch "$RC_SVCDIR"/usr_premounted
-		fi
 	fi
 	ebegin "Mounting local filesystems"
 	mount -at "$types" $no_netdev
 	eend $? "Some local filesystem failed to mount"
-	rc=$?
-	if [ "$RC_UNAME" != Linux ]; then
-		rc=0
-	elif yesno "${ignore_mount_errors:-NO}"; then
-		if [ $rc -ne 0 ]; then
-			ewarn "localmount: errors detected, but ignored"
-		fi
-		rc=0
-	fi
-	return $rc
+
+	# Always return 0 - some local mounts may not be critical for boot
+	return 0
 }

 stop()
 {
-	yesno $RC_GOINGDOWN || return 0
 	# We never unmount / or /dev or $RC_SVCDIR

 	# Bug 381783
-	local rc_svcdir=$(printf '%s\n' "$RC_SVCDIR" | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
+	local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')

 	local x= no_umounts_r="/|/dev|/dev/.*|${rc_svcdir}"
 	no_umounts_r="${no_umounts_r}|/bin|/sbin|/lib(32|64)?|/libexec"
@@ -66,44 +48,14 @@ stop()

 	if [ "$RC_UNAME" = Linux ]; then
 		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*"
-		if [ -e "$rc_svcdir"/usr_premounted ]; then
-			no_umounts_r="$no_umounts_r|/usr"
-		fi
 	fi
 	no_umounts_r="^($no_umounts_r)$"

 	# Flush all pending disk writes now
-	sync
+	sync; sync

 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh

-	if [ "$RC_UNAME" = Linux ] && [ -d /sys/fs/aufs ] ; then
-		#if / is aufs we remount it noxino during shutdown
-		if mountinfo -q -f '^aufs$' / ; then
-			mount -o remount,noxino,rw /
-			sync
-		fi
-
-		local aufs_branch aufs_mount_point aufs_si_id aufs_br_id branches
-		for aufs_si_dir in /sys/fs/aufs/si*; do
-			[ -d "${aufs_si_dir}" ] || continue
-			aufs_si_id="si=${aufs_si_dir#/sys/fs/aufs/si_}"
-			aufs_mount_point="$(mountinfo -o ${aufs_si_id})"
-			branches="$aufs_si_dir/br[0-9] $aufs_si_dir/br[0-9][0-9] $aufs_si_dir/br[0-9][0-9][0-9]"
-			for x in $branches; do
-				[ -e "${x}" ] || continue
-				aufs_branch=$(sed 's/=.*//g' $x)
-				eindent
-				if ! mount -o "remount,del:$aufs_branch" "$aufs_mount_point" > /dev/null 2>&1; then
-					ewarn "Failed to remove branch $aufs_branch from aufs \
-					$aufs_mount_point"
-				fi
-				eoutdent
-				sync
-			done
-		done
-	fi
-
 	# Umount loop devices
 	einfo "Unmounting loop devices"
 	eindent
--- a/init.d/loopback.in
+++ b/init.d/loopback.in
@@ -1,42 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2013-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Configures the loopback interface."
-
-depend()
-{
-	keyword -jail -prefix -systemd-nspawn -vserver
-}
-
-start()
-{
-	if [ "$RC_UNAME" = Linux ]; then
-		ebegin "Bringing up network interface lo"
-		if command -v ip > /dev/null 2>&1; then
-			ip addr add 127.0.0.1/8 dev lo brd + scope host
-			ip route add 127.0.0.0/8 dev lo scope host
-			ip link set lo up
-		else
-			ifconfig lo 127.0.0.1 netmask 255.0.0.0
-			route add -net 127.0.0.0 netmask 255.0.0.0 gw 127.0.0.1
-		fi
-	else
-		ebegin "Bringing up network interface lo0"
-		ifconfig lo0 127.0.0.1 netmask 255.0.0.0
-		route -q add -inet 127.0.0.0 -netmask 255.0.0.0 127.0.0.1
-	fi
-	eend $?
-}
-
-stop()
-{
-	return 0
-}
--- a/init.d/mixer.in
+++ b/init.d/mixer.in
@@ -1,20 +1,13 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 extra_commands="restore"

 depend()
 {
 	need localmount
-	keyword -jail -prefix
+	keyword -jail
 }

 restore()
--- a/init.d/modules.in
+++ b/init.d/modules.in
@@ -1,20 +1,13 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 description="Loads a user defined list of kernel modules."

 depend()
 {
 	use isapnp
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -openvz -vserver -lxc
 }

 start()
--- a/init.d/mount-ro.in
+++ b/init.d/mount-ro.in
@@ -1,28 +1,19 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 description="Re-mount filesytems read-only for a clean reboot."

 depend()
 {
 	need killprocs savecache
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -openvz -vserver -lxc
 }

 start()
 {
-	local ret=0
-
 	# Flush all pending disk writes now
-	sync
+	sync; sync

 	ebegin "Remounting remaining filesystems read-only"
 	# We need the do_unmount function
@@ -32,7 +23,7 @@ start()
 	# Bug 381783
 	local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')

-	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|/run|${rc_svcdir}" x= fs=
+	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|${rc_svcdir}" x= fs=
 	m="$m|/bin|/sbin|/lib(32|64)?|/libexec"
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
 	local IFS="$IFS:"
@@ -48,9 +39,6 @@ start()
 	do_unmount "umount -r" \
 		--skip-point-regex "$m" \
 		"${fs:+--skip-fstype-regex}" $fs --nonetdev
-	ret=$?
-
 	eoutdent
-
-	eend $ret
+	eend $?
 }
--- a/init.d/moused.in
+++ b/init.d/moused.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 mouse=${RC_SVCNAME##*.}
 if [ -n "$mouse" -a "$mouse" != "moused" ]; then
@@ -23,7 +16,7 @@ depend()
 {
 	need localmount
 	after bootmisc
-	keyword -jail -prefix
+	keyword -jail
 }

 start()
--- a/init.d/mtab.in
+++ b/init.d/mtab.in
@@ -1,46 +1,35 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 description="Update /etc/mtab to match what the kernel knows about"

 depend()
 {
 	need root
-	keyword -prefix -systemd-nspawn
 }

 start()
 {
-	local rc=0
-	ebegin "Updating /etc/mtab"
-	if ! checkpath -W /etc; then
-		rc=1
-	elif ! yesno ${mtab_is_file:-no}; then
-		[ ! -L /etc/mtab ] && [ -f /etc/mtab ] &&
-			ewarn "Removing /etc/mtab file"
-		einfo "Creating mtab symbolic link"
-		ln -snf /proc/self/mounts /etc/mtab
-	else
-		[ -L /etc/mtab ] && ewarn "Removing /etc/mtab symbolic link"
-		rm -f /etc/mtab
-		einfo "Creating mtab file"
-		# With / as tmpfs we cannot umount -at tmpfs in localmount as that
-		# makes / readonly and dismounts all tmpfs even if in use which is
-		# not good. Luckily, umount uses /etc/mtab instead of /proc/mounts
-		# which allows this hack to work.
-		grep -v "^[! ]* / tmpfs " /proc/mounts > /etc/mtab
-
-		# Remove stale backups
-		rm -f /etc/mtab~ /etc/mtab~~
+	if [ -L /etc/mtab ]
+	then
+		einfo "Skipping mtab update (mtab is a symbolic link)"
+		return 0
 	fi
-	eend $rc "/etc is not writable; unable to create /etc/mtab"
-	return 0
+
+	ebegin "Updating /etc/mtab"
+	if ! echo 2>/dev/null >/etc/mtab; then
+		ewend 1 "/etc/mtab is not updateable"
+		return 0
+	fi
+
+	# With / as tmpfs we cannot umount -at tmpfs in localmount as that
+	# makes / readonly and dismounts all tmpfs even if in use which is
+	# not good. Luckily, umount uses /etc/mtab instead of /proc/mounts
+	# which allows this hack to work.
+	grep -v "^[^ ]* / tmpfs " /proc/mounts > /etc/mtab
+
+	# Remove stale backups
+	rm -f /etc/mtab~ /etc/mtab~~
+	eend 0
 }
--- a/init.d/net-online.in
+++ b/init.d/net-online.in
@@ -1,76 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Delays until the network is online or a specific timeout"
-
-depend()
-{
-	after modules
-	need sysfs
-	keyword -jail -lxc -openvz -prefix -systemd-nspawn -uml -vserver
-}
-
-get_interfaces()
-{
-	local ifname iftype
-	for ifname in /sys/class/net/*; do
-		read iftype < ${ifname}/type
-		[ "$iftype" = "1" ] && printf "%s " ${ifname##*/}
-	done
-}
-
-get_default_gateway()
-{
-	local cmd gateway
-	if command -v ip > /dev/null 2>&1; then
-		cmd="ip route show"
-	else
-		cmd=route
-	fi
-	set -- $($cmd | grep default)
-	[ "$2" != via ] && gateway="$2" || gateway="$3"
-	printf "%s" $gateway
-}
-
-start ()
-{
-	local carriers configured dev gateway ifcount infinite interfaces
-	local rc state timeout x
-
-	ebegin "Checking to see if the network is online"
-	rc=0
-	interfaces=${interfaces:-$(get_interfaces)}
-	timeout=${timeout:-120}
- [ $timeout -eq 0 ] && infinite=true || infinite=false
- while $infinite || [ $timeout -gt 0 ]; do
-	carriers=0
-	configured=0
-	ifcount=0
- 	for dev in ${interfaces}; do
-		: $((ifcount += 1))
-		read x < /sys/class/net/$dev/carrier
-		[ $x -eq 1 ] && : $((carriers += 1))
-		read x < /sys/class/net/$dev/operstate
-		[ "$x" = up ] && : $((configured += 1))
-	done
-	[ $configured -eq $ifcount ] && [ $carriers -ge 1 ] && break
-	sleep 1
-	: $((timeout -= 1))
- done
- ! $infinite && [ $timeout -eq 0 ] && rc=1
- if [ $rc -eq 0 ] && yesno ${ping_default_gateway:-no}; then
- 	gateway="$(get_default_gateway)"
- 	if [ -n "$gateway" ] && ! ping -c 1 $gateway > /dev/null 2>&1; then
-		rc=1
-	fi
- fi
- eend $rc "The network is offline"
-}
--- a/init.d/net.lo.in
+++ b/init.d/net.lo.in
@@ -0,0 +1,769 @@
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+MODULESDIR="${RC_LIBEXECDIR}/net"
+MODULESLIST="${RC_SVCDIR}/nettree"
+_config_vars="config routes"
+
+[ -z "${IN_BACKGROUND}" ] && IN_BACKGROUND="NO"
+
+description="Configures network interfaces."
+
+# Handy var so we don't have to embed new lines everywhere for array splitting
+__IFS="
+"
+depend()
+{
+	local IFACE=${RC_SVCNAME#*.}
+	local IFVAR=$(shell_var "${IFACE}")
+
+	need localmount
+	after bootmisc
+	keyword -jail -vserver
+
+	case "${IFACE}" in
+		lo|lo0) provide lo;;
+		*)
+			after net.lo net.lo0 dbus
+			provide net
+			;;
+	esac
+
+	if [ "$(command -v "depend_${IFVAR}")" = "depend_${IFVAR}" ]; then
+		depend_${IFVAR}
+	fi
+
+	local dep= prov=
+	for dep in need use before after provide keyword; do
+		eval prov=\$rc_${dep}_${IFVAR}
+		if [ -n "${prov}" ]; then
+			${dep} ${prov}
+			ewarn "rc_${dep}_${IFVAR} is deprecated."
+			ewarn "Please use rc_net_${IFVAR}_${dep} instead."
+		fi
+	done
+}
+
+# Support bash arrays - sigh
+_array_helper()
+{
+	local _a=
+
+	eval _a=\$$1
+	_a=$(echo "${_a}" | sed -e 's:^[[:space:]]*::' -e 's:[[:space:]]*$::' -e '/^$/d' -e 's:[[:space:]]\{1,\}: :g')
+
+	[ -n "${_a}" ] && printf "%s\n" "${_a}"
+}
+
+_get_array()
+{
+	local _a=
+	if [ -n "${BASH}" ]; then
+		case "$(declare -p "$1" 2>/dev/null)" in
+			"declare -a "*)
+				ewarn "You are using a bash array for $1."
+				ewarn "This feature will be removed in the future."
+				ewarn "Please see net.example for the correct format for $1."
+				eval "set -- \"\${$1[@]}\""
+				for _a; do
+					printf "%s\n" "${_a}"
+				done
+				return 0
+				;;
+		esac
+	fi
+
+	_array_helper $1
+}
+
+# Flatten bash arrays to simple strings
+_flatten_array()
+{
+	if [ -n "${BASH}" ]; then
+		case "$(declare -p "$1" 2>/dev/null)" in
+			"declare -a "*)
+				ewarn "You are using a bash array for $1."
+				ewarn "This feature will be removed in the future."
+				ewarn "Please see net.example for the correct format for $1."
+				eval "set -- \"\${$1[@]}\""
+				for x; do
+					printf "'%s' " "$(printf "$x" | sed "s:':'\\\'':g")"
+				done
+				return 0
+				;;
+		esac
+	fi
+
+	_array_helper $1
+}
+
+_wait_for_carrier()
+{
+	local timeout= efunc=einfon
+
+	_has_carrier  && return 0
+
+	eval timeout=\$carrier_timeout_${IFVAR}
+	timeout=${timeout:-${carrier_timeout:-5}}
+
+	# Incase users don't want this nice feature ...
+	[ ${timeout} -le 0 ] && return 0
+
+	yesno ${RC_PARALLEL} && efunc=einfo
+	${efunc} "Waiting for carrier (${timeout} seconds) "
+	while [ ${timeout} -gt 0 ]; do
+		sleep 1
+		if _has_carrier; then
+			[ "${efunc}" = "einfon" ] && echo
+			eend 0
+			return 0
+		fi
+		: $(( timeout -= 1 ))
+		[ "${efunc}" = "einfon" ] && printf "."
+	done
+
+	[ "${efunc}" = "einfon" ] && echo
+	eend 1
+	return 1
+}
+
+_netmask2cidr()
+{
+	# Some shells cannot handle hex arithmetic, so we massage it slightly
+	# Buggy shells include FreeBSD sh, dash and busybox.
+	# bash and NetBSD sh don't need this.
+	case $1 in
+		0x*)
+		local hex=${1#0x*} quad=
+		while [ -n "${hex}" ]; do
+			local lastbut2=${hex#??*}
+			quad=${quad}${quad:+.}0x${hex%${lastbut2}*}
+			hex=${lastbut2}
+		done
+		set -- ${quad}
+		;;
+	esac
+
+	local i= len=
+	local IFS=.
+	for i in $1; do
+		while [ ${i} -ne 0 ]; do
+			: $(( len += i % 2 ))
+			: $(( i >>= 1 ))
+		done
+	done
+
+	echo "${len}"
+}
+
+_configure_variables()
+{
+	local var= v= t=
+
+	for var in ${_config_vars}; do
+		local v=
+		for t; do
+			eval v=\$${var}_${t}
+			if [ -n "${v}" ]; then
+				eval ${var}_${IFVAR}=\$${var}_${t}
+				continue 2
+			fi
+		done
+	done
+}
+
+_which()
+{
+	local i OIFS
+	# Empty
+	[ -z "$1" ] && return
+	# check paths
+	OIFS="$IFS"
+	IFS=:
+	for i in $PATH ; do
+		[ -x $i/$1 ] && echo $i/$1 && break
+	done
+	IFS=$OIFS
+}
+
+# Like _which, but also consider shell builtins, and multiple alternatives
+_program_available()
+{
+	[ -z "$1" ] && return 0
+	local x=
+	for x; do
+		case "${x}" in
+			/*) [ -x "${x}" ] && break;;
+			*) type "${x}" >/dev/null 2>&1 && break;;
+		esac
+		unset x
+	done
+	[ -n "${x}" ] && echo $x && return 0
+	return 1
+}
+
+_show_address()
+{
+	einfo "received address $(_get_inet_address "${IFACE}")"
+}
+
+# Basically sorts our modules into order and saves the list
+_gen_module_list()
+{
+	local x= f= force=$1
+	if ! ${force} && [ -s "${MODULESLIST}" -a "${MODULESLIST}" -nt "${MODULESDIR}" ]; then
+		local update=false
+		for x in "${MODULESDIR}"/*.sh; do
+			[ -e "${x}" ] || continue
+			if [ "${x}" -nt "${MODULESLIST}" ]; then
+				update=true
+				break
+			fi
+		done
+		${update} || return 0
+	fi
+
+	einfo "Caching network module dependencies"
+	# Run in a subshell to protect the main script
+	(
+	after() {
+		eval ${MODULE}_after="\"\${${MODULE}_after}\${${MODULE}_after:+ }$*\""
+	}
+
+	before() {
+		local mod=${MODULE}
+		local MODULE=
+		for MODULE; do
+			after "${mod}"
+		done
+	}
+
+	program() {
+		if [ "$1" = "start" -o "$1" = "stop" ]; then
+			local s="$1"
+			shift
+			eval ${MODULE}_program_${s}="\"\${${MODULE}_program_${s}}\${${MODULE}_program_${s}:+ }$*\""
+		else
+			eval ${MODULE}_program="\"\${${MODULE}_program}\${${MODULE}_program:+ }$*\""
+		fi
+	}
+
+	provide() {
+		eval ${MODULE}_provide="\"\${${MODULE}_provide}\${${MODULE}_provide:+ }$*\""
+		local x
+		for x in $*; do
+			eval ${x}_providedby="\"\${${MODULE}_providedby}\${${MODULE}_providedby:+ }${MODULE}\""
+		done
+	}
+
+	for MODULE in "${MODULESDIR}"/*.sh; do
+		sh -n "${MODULE}" || continue
+		. "${MODULE}" || continue
+		MODULE=${MODULE#${MODULESDIR}/}
+		MODULE=${MODULE%.sh}
+		eval ${MODULE}_depend
+		MODULES="${MODULES} ${MODULE}"
+	done
+
+	VISITED=
+	SORTED=
+	visit() {
+		case " ${VISITED} " in
+			*" $1 "*) return;;
+		esac
+		VISITED="${VISITED} $1"
+
+		eval AFTER=\$${1}_after
+		for MODULE in ${AFTER}; do
+			eval PROVIDEDBY=\$${MODULE}_providedby
+			if [ -n "${PROVIDEDBY}" ]; then
+				for MODULE in ${PROVIDEDBY}; do
+					visit "${MODULE}"
+				done
+			else
+				visit "${MODULE}"
+			fi
+		done
+
+		eval PROVIDE=\$${1}_provide
+		for MODULE in ${PROVIDE}; do
+			visit "${MODULE}"
+		done
+
+		eval PROVIDEDBY=\$${1}_providedby
+		[ -z "${PROVIDEDBY}" ] && SORTED="${SORTED} $1"
+	}
+
+	for MODULE in ${MODULES}; do
+		visit "${MODULE}"
+	done
+
+	printf "" > "${MODULESLIST}"
+	i=0
+	for MODULE in ${SORTED}; do
+		eval PROGRAM=\$${MODULE}_program
+		eval PROGRAM_START=\$${MODULE}_program_start
+		eval PROGRAM_STOP=\$${MODULE}_program_stop
+		eval PROVIDE=\$${MODULE}_provide
+		echo "module_${i}='${MODULE}'" >> "${MODULESLIST}"
+		echo "module_${i}_program='${PROGRAM}'" >> "${MODULESLIST}"
+		echo "module_${i}_program_start='${PROGRAM_START}'" >> "${MODULESLIST}"
+		echo "module_${i}_program_stop='${PROGRAM_STOP}'" >> "${MODULESLIST}"
+		echo "module_${i}_provide='${PROVIDE}'" >> "${MODULESLIST}"
+		: $(( i += 1 ))
+	done
+	echo "module_${i}=" >> "${MODULESLIST}"
+	)
+
+	return 0
+}
+
+_load_modules()
+{
+	local starting=$1 mymods=
+
+	# Ensure our list is up to date
+	_gen_module_list false
+	if ! . "${MODULESLIST}"; then
+		_gen_module_list true
+		. "${MODULESLIST}"
+	fi
+
+	MODULES=
+	if [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
+		eval mymods=\$modules_${IFVAR}
+		[ -z "${mymods}" ] && mymods=${modules}
+	fi
+
+	local i=-1 x= mod= f= provides=
+	while true; do
+		: $(( i += 1 ))
+		eval mod=\$module_${i}
+		[ -z "${mod}" ] && break
+		[ -e "${MODULESDIR}/${mod}.sh" ] || continue
+
+		eval set -- \$module_${i}_program
+		if [ -n "$1" ]; then
+			if ! _program_available "$@" >/dev/null; then
+				vewarn "Skipping module $mod due to missing program: $@"
+				continue
+			fi
+		fi
+		if ${starting}; then
+			eval set -- \$module_${i}_program_start
+		else
+			eval set -- \$module_${i}_program_stop
+		fi
+		if [ -n "$1" ]; then
+			if ! _program_available "$@" >/dev/null; then
+				vewarn "Skipping module $mod due to missing program: $@"
+				continue
+			fi
+		fi
+
+		eval provides=\$module_${i}_provide
+		if ${starting}; then
+			case " ${mymods} " in
+				*" !${mod} "*) continue;;
+				*" !${provides} "*) [ -n "${provides}" ] && continue;;
+			esac
+		fi
+		MODULES="${MODULES}${MODULES:+ }${mod}"
+
+		# Now load and wrap our functions
+		if ! . "${MODULESDIR}/${mod}.sh"; then
+			eend 1 "${RC_SVCNAME}: error loading module \`${mod}'"
+			exit 1
+		fi
+
+		[ -z "${provides}" ] && continue
+
+		# Wrap our provides
+		local f=
+		for f in pre_start start post_start; do
+			eval "${provides}_${f}() { [ "$(command -v "${mod}_${f}")" = "${mod}_${f}" ] || return 0; ${mod}_${f} \"\$@\"; }"
+		done
+
+		eval module_${mod}_provides="${provides}"
+		eval module_${provides}_providedby="${mod}"
+	done
+
+	# Wrap our preferred modules
+	for mod in ${mymods}; do
+		case " ${MODULES} " in
+			*" ${mod} "*)
+			eval x=\$module_${mod}_provides
+			[ -z "${x}" ] && continue
+			for f in pre_start start post_start; do
+				eval "${x}_${f}() { [ "$(command -v "${mod}_${f}")" = "${mod}_${f}" ] || return 0; ${mod}_${f} \"\$@\"; }"
+			done
+			eval module_${x}_providedby="${mod}"
+			;;
+		esac
+	done
+
+	# Finally remove any duplicated provides from our list if we're starting
+	# Otherwise reverse the list
+	local LIST="${MODULES}" p=
+	MODULES=
+	if ${starting}; then
+		for mod in ${LIST}; do
+			eval x=\$module_${mod}_provides
+			if [ -n "${x}" ]; then
+				eval p=\$module_${x}_providedby
+				[ "${mod}" != "${p}" ] && continue
+			fi
+			MODULES="${MODULES}${MODULES:+ }${mod}"
+		done
+	else
+		for mod in ${LIST}; do
+			MODULES="${mod}${MODULES:+ }${MODULES}"
+		done
+	fi
+
+	veinfo "Loaded modules: ${MODULES}"
+}
+
+_load_config()
+{
+	local config="$(_get_array "config_${IFVAR}")"
+	local fallback="$(_get_array fallback_${IFVAR})"
+
+	config_index=0
+	local IFS="$__IFS"
+	set -- ${config}
+
+	# We should support a space separated array for cidr configs
+	# But only as long as they do not contain other parameters for the address
+	if [ $# = 1 ]; then
+		unset IFS
+		set -- ${config}
+		# Of course, we may have a single address added old style.
+		# If the NEXT argument is a v4 or v6 address, it's the next config.
+		# Otherwise, it's arguments to the first config...
+		if [ "${2#*.*}" = "${2}" -a "${2#*:*}" = "${2}" ]; then
+			# Not an IPv4/IPv6
+			local IFS="$__IFS"
+			set -- ${config}
+		fi
+	fi
+
+	# Ensure that loopback has the correct address
+	if [ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ]; then
+		if [ "$1" != "null" ]; then
+		   	config_0="127.0.0.1/8"
+			config_index=1
+		fi
+	else
+		if [ -z "$1" ]; then
+			ewarn "No configuration specified; defaulting to DHCP"
+			config_0="dhcp"
+			config_index=1
+		fi
+	fi
+
+
+	# We store our config in an array like vars
+	# so modules can influence it
+	for cmd; do
+		eval config_${config_index}="'${cmd}'"
+		: $(( config_index += 1 ))
+	done
+	# Terminate the list
+	eval config_${config_index}=
+
+	config_index=0
+	for cmd in ${fallback}; do
+		eval fallback_${config_index}="'${cmd}'"
+		: $(( config_index += 1 ))
+	done
+	# Terminate the list
+	eval fallback_${config_index}=
+
+	# Don't set to zero, so any net modules don't have to do anything extra
+	config_index=-1
+}
+
+# Support functions
+_run_if()
+{
+	local cmd=$1 iface=$2 ifr=${IFACE} ifv=${IFVAR}
+	# Ensure that we don't stamp on real values
+	local IFACE= IFVAR=
+	shift
+	if [ -n "${iface}" ]; then
+		IFACE="${iface}"
+		[ "${iface}" != "${ifr}" ] && IFVAR=$(shell_var "${IFACE}")
+	else
+		IFACE=${ifr}
+		IFVAR=${ifv}
+	fi
+	${cmd}
+}
+interface_exists()
+{
+	_run_if _exists "$@"
+}
+interface_up()
+{
+	_run_if _up "$@"
+}
+interface_down()
+{
+	_run_if _down "$@"
+}
+
+start()
+{
+	local IFACE=${RC_SVCNAME#*.} oneworked=false fallback=false module=
+	local IFVAR=$(shell_var "${IFACE}") cmd= our_metric=
+	local metric=0 _up_before_preup
+	eval _up_before_preup="\$up_before_preup_${IFVAR}"
+	[ -z "${_up_before_preup}" ] && _up_before_preup=$up_before_preup
+
+	einfo "Bringing up interface ${IFACE}"
+	eindent
+
+	if [ -z "${MODULES}" ]; then
+		local MODULES=
+		_load_modules true
+	fi
+
+	# We up the iface twice if we have a preup to ensure it's up if
+	# available in preup and afterwards incase the user inadvertently
+	# brings it down
+	if [ "$(command -v preup)" = "preup" ]; then
+		yesno "${_up_before_preup:-yes}" && _up 2>/dev/null
+		ebegin "Running preup"
+		eindent
+		preup || return 1
+		eoutdent
+	fi
+
+	_up 2>/dev/null
+
+	for module in ${MODULES}; do
+		if [ "$(command -v "${module}_pre_start")" = "${module}_pre_start" ]; then
+			${module}_pre_start || exit $?
+		fi
+	done
+
+	if ! _exists; then
+		eerror "ERROR: interface ${IFACE} does not exist"
+		eerror "Ensure that you have loaded the correct kernel module for your hardware"
+		return 1
+	fi
+
+	if ! _wait_for_carrier; then
+		if service_started devd; then
+			ewarn "no carrier, but devd will start us when we have one"
+			mark_service_inactive "${RC_SVCNAME}"
+		else
+			eerror "no carrier"
+		fi
+		return 1
+	fi
+
+	local config= config_index=
+	_load_config
+	config_index=0
+
+	eval our_metric=\$metric_${IFVAR}
+	if [ -n "${our_metric}" ]; then
+		metric=${our_metric}
+	elif [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
+		: $(( metric += $(_ifindex) ))
+	fi
+
+	while true; do
+		eval config=\$config_${config_index}
+		[ -z "${config}" ] && break
+
+		set -- ${config}
+		if [ "$1" != "null" -a "$1" != "noop" ]; then
+			ebegin "$1"
+		fi
+		eindent
+		case "$1" in
+			noop)
+				if [ -n "$(_get_inet_address)" ]; then
+					oneworked=true
+					break
+				fi
+				;;
+			null) :;;
+			[0-9]*|*:*) _add_address ${config};;
+			*)
+				if [ "$(command -v "${config}_start")" = "${config}_start" ]; then
+					"${config}"_start
+				else
+					eerror "nothing provides \`${config}'"
+				fi
+				;;
+		esac
+		if eend $?; then
+			oneworked=true
+		else
+			eval config=\$fallback_${config_index}
+			if [ -n "${config}" ]; then
+				fallback=true
+				eoutdent
+				ewarn "Trying fallback configuration ${config}"
+				eindent
+				eval config_${config_index}=\$config
+				unset fallback_${config_index}
+				: $(( config_index -= 1 ))
+			fi
+		fi
+		eoutdent
+		: $(( config_index += 1 ))
+	done
+
+	if ! ${oneworked}; then
+		if [ "$(command -v failup)" = "failup" ]; then
+			ebegin "Running failup"
+			eindent
+			failup
+			eoutdent
+		fi
+		return 1
+	fi
+
+	local hidefirstroute=false first=true routes=
+	if ${fallback}; then
+		routes="$(_get_array "fallback_routes_${IFVAR}")"
+	fi
+	if [ -z "${routes}" ]; then
+		routes="$(_get_array "routes_${IFVAR}")"
+	fi
+	if [ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ]; then
+		if [ "${config_0}" != "null" ]; then
+			routes="127.0.0.0/8 via 127.0.0.1
+${routes}"
+			hidefirstroute=true
+		fi
+	fi
+
+	local OIFS="${IFS}" SIFS="${IFS-y}"
+	local IFS="$__IFS"
+	for cmd in ${routes}; do
+		unset IFS
+		if ${first}; then
+			first=false
+			einfo "Adding routes"
+		fi
+		eindent
+		ebegin ${cmd}
+		# Work out if we're a host or a net if not told
+		case ${cmd} in
+			-net" "*|-host" "*);;
+			*" "netmask" "*)                   cmd="-net ${cmd}";;
+			*.*.*.*/32*)                       cmd="-host ${cmd}";;
+			*.*.*.*/*|0.0.0.0|0.0.0.0" "*)     cmd="-net ${cmd}";;
+			default|default" "*)               cmd="-net ${cmd}";;
+			*)                                 cmd="-host ${cmd}";;
+		esac
+		if ${hidefirstroute}; then
+			_add_route ${cmd} >/dev/null 2>&1
+			hidefirstroute=false
+		else
+			_add_route ${cmd} >/dev/null
+		fi
+		eend $?
+		eoutdent
+	done
+	if [ "${SIFS}" = "y" ]; then
+		unset IFS
+	else
+		IFS="${OIFS}"
+	fi
+
+	for module in ${MODULES}; do
+		if [ "$(command -v "${module}_post_start")" = "${module}_post_start" ]; then
+			${module}_post_start || exit $?
+		fi
+	done
+
+	if [ "$(command -v postup)" = "postup" ]; then
+		ebegin "Running postup"
+		eindent
+		postup
+		eoutdent
+	fi
+
+	return 0
+}
+
+stop()
+{
+	local IFACE=${RC_SVCNAME#*.} module=
+	local IFVAR=$(shell_var "${IFACE}") opts=
+
+	einfo "Bringing down interface ${IFACE}"
+	eindent
+
+	if [ -z "${MODULES}" ]; then
+		local MODULES=
+		_load_modules false
+	fi
+
+	if [ "$(command -v predown)" = "predown" ]; then
+		ebegin "Running predown"
+		eindent
+		predown || return 1
+		eoutdent
+	else
+		if is_net_fs /; then
+			eerror "root filesystem is network mounted -- can't stop ${IFACE}"
+			return 1
+		fi
+	fi
+
+	for module in ${MODULES}; do
+		if [ "$(command -v "${module}_pre_stop")" = "${module}_pre_stop" ]; then
+			${module}_pre_stop || exit $?
+		fi
+	done
+
+	for module in ${MODULES}; do
+		if [ "$(command -v "${module}_stop")" = "${module}_stop" ]; then
+			${module}_stop
+		fi
+	done
+
+	# Only delete addresses for interfaces that exist
+	if _exists; then
+		# PPP can manage it's own addresses when IN_BACKGROUND
+		# Important in case "demand" set on the ppp link
+		if ! (yesno ${IN_BACKGROUND} && is_ppp) ; then
+			_delete_addresses "${IFACE}"
+		fi
+	fi
+
+	for module in ${MODULES}; do
+		if [ "$(command -v "${module}_post_stop")" = "${module}_post_stop" ]; then
+			${module}_post_stop
+		fi
+	done
+
+	# If not in background, and not loopback then bring the interface down
+	# unless overridden.
+	if ! yesno ${IN_BACKGROUND} && \
+	[ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
+		eval module=\$ifdown_${IFVAR}
+		module=${module:-${ifdown:-YES}}
+		yesno ${module} && _down 2>/dev/null
+	fi
+
+	type resolvconf >/dev/null 2>&1 && resolvconf -d "${IFACE}" 2>/dev/null
+
+	if [ "$(command -v "postdown")" = "postdown" ]; then
+		ebegin "Running postdown"
+		eindent
+		postdown
+		eoutdent
+	fi
+
+	return 0
+}
--- a/init.d/netmount.in
+++ b/init.d/netmount.in
@@ -1,36 +1,65 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 description="Mounts network shares according to /etc/fstab."

-depend()
+need_portmap()
 {
-	local opts mywant=""
-	for opts in $(fstabinfo -o -t nfs,nfs4); do
-		case $opts in
-			noauto) ;;
-			*) mywant="$mywant nfsclient"; break ;;
+	local opts=
+	local IFS="
+"
+	set -- $(fstabinfo --options --fstype nfs,nfs4)
+	for opts; do
+		case ,$opts, in
+			*,noauto,*|*,nolock,*);;
+			*) return 0;;
 		esac
 	done
- 	config /etc/fstab
-	want $mywant
-	use afc-client amd openvpn
-	use dns
-	keyword -jail -prefix -systemd-nspawn -vserver -lxc
+	return 1
+}
+
+depend()
+{
+	# Only have portmap as a dependency if there is a nfs mount in fstab
+	# that is set to mount at boot
+	local pmap=
+	if need_portmap; then
+		pmap="rpc.statd"
+		[ -x @SYSCONFDIR@/init.d/rpcbind ] \
+			&& pmap="$pmap rpcbind" \
+			|| pmap="$pmap portmap"
+	fi
+
+	config /etc/fstab
+	need net $pmap
+	use afc-client amd autofs openvpn
+	use dns nfs nfsmount portmap rpcbind rpc.statd rpc.lockd
+	keyword -jail -vserver
 }

 start()
 {
+	local myneed= myuse= pmap="portmap" nfsmounts=
+	[ -x @SYSCONFDIR@/init.d/rpcbind ] && pmap="rpcbind"
+
 	local x= fs= rc=
 	for x in $net_fs_list $extra_net_fs_list; do
+		case "$x" in
+			nfs|nfs4)
+			# If the nfsmount script took care of the nfs
+			# filesystems, then there's no point in trying
+			# them twice
+			service_started nfsmount && continue
+
+			# Only try to mount NFS filesystems if portmap was
+			# started. This is to fix "hang" problems for new
+			# users who do not add portmap to the default runlevel.
+			if need_portmap && ! service_started "$pmap"; then
+				continue
+			fi
+			;;
+		esac
 		fs="$fs${fs:+,}$x"
 	done

@@ -42,10 +71,7 @@ start()
 		rc=$?
 	fi
 	ewend $rc "Could not mount all network filesystems"
-	if [ "$RC_UNAME" != Linux ]; then
-		rc=0
-	fi
-	return $rc
+	return 0
 }

 stop()
--- a/init.d/network.in
+++ b/init.d/network.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2009-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 # This script was inspired by the equivalent rc.d network from NetBSD.

@@ -19,10 +12,8 @@ depend()
 {
 	need localmount
 	after bootmisc
-	if [ -n "$(interfaces)" ]; then
-		provide net
-	fi
-	keyword -jail -prefix -vserver
+	provide net
+	keyword -jail -vserver
 }

 uniqify()
@@ -53,11 +44,7 @@ sys_interfaces()
 		local w= rest= i= cmd=$1
 		while read w rest; do
 			i=${w%%:*}
-			case "$i" in
-				"$w") continue ;;
-				lo|lo0) continue ;;
-				*) ;;
-			esac
+			[ "$i" != "$w" ] || continue
 			if [ "$cmd" = u ]; then
 				ifconfig "$i" | grep -q "[ ]*UP" || continue
 			fi
@@ -232,8 +219,23 @@ start()
 		eend $?
 	fi

+	ewarn
+	ewarn "The $RC_SVCNAME script is deprecated and will be"
+	ewarn "removed in the future."
+	ewarn "Please use the net.* scripts to manage your network interfaces."
+	ewarn
+
 	einfo "Starting network"
 	routeflush
+	if [ "$RC_UNAME" = "Linux" ]; then
+		ifconfig lo 127.0.0.1 netmask 255.0.0.0 || cr=1
+		route add -net 127.0.0.0 netmask 255.0.0.0 \
+			gw 127.0.0.1 reject 2>/dev/null
+	else
+		ifconfig lo0 127.0.0.1 netmask 255.0.0.0 || cr=1
+		route -q add -inet 127.0.0.0 -netmask 255.0.0.0 \
+			127.0.0.1 -reject || cr=1
+	fi
 	eindent
 	for int in $(interfaces); do
 		local func= cf=
@@ -325,17 +327,13 @@ stop()
 	# Don't stop the network at shutdown.
 	# We don't use the noshutdown keyword so that we are started again
 	# correctly if we go back to multiuser.
-	yesno ${keep_network:-YES} && yesno $RC_GOINGDOWN && return 0
+	yesno ${shutdown_network:-YES} && yesno $RC_GOINGDOWN && return 0

 	local int= intv= cmd= downcmd= r=
 	einfo "Stopping network"
 	routeflush
 	eindent
 	for int in $(reverse $(interfaces u)); do
-		case "$int" in
-			lo|lo0) continue ;;
-			*) ;;
-		esac
 		intv=$(shell_var "$int")
 		eval downcmd=\$ifdown_$intv
 		eval cmd=\$ip_$intv
--- a/init.d/newsyslog.in
+++ b/init.d/newsyslog.in
@@ -1,20 +1,12 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 required_files="/etc/newsyslog.conf"

 depend()
 {
 	need localmount
-	keyword -prefix
 }

 start()
--- a/init.d/nscd.in
+++ b/init.d/nscd.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 command=/usr/sbin/nscd
 command_args=$nscd_args
--- a/init.d/numlock.in
+++ b/init.d/numlock.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 description="Turns numlock on for the consoles."

@@ -16,7 +9,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 depend()
 {
 	need localmount
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -openvz -vserver -lxc
 }

 _setleds()
--- a/init.d/osclock.in
+++ b/init.d/osclock.in
@@ -1,19 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2014-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-# Can be used on OSs that take care of the clock.
-
-description="Provides clock"
-
-depend()
-{
-	provide clock
-}
--- a/init.d/pf.in
+++ b/init.d/pf.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 name="Packet Filter"
 : ${pf_conf:=${pf_rules:-/etc/pf.conf}}
@@ -18,13 +11,13 @@ extra_started_commands="reload"

 depend() {
 	need localmount
-	keyword -jail -prefix
+	keyword -jail
 }

 start()
 {
 	ebegin "Starting $name"
-	if command -v kldload >/dev/null 2>&1; then
+	if type kldload >/dev/null 2>&1; then
 		kldload pf 2>/dev/null
 	fi
 	pfctl -q -F all
--- a/init.d/powerd.in
+++ b/init.d/powerd.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 command=/usr/sbin/powerd
 command_args=$powerd_args
@@ -19,7 +12,7 @@ depend()
 	need localmount
 	use logger
 	after bootmisc
-	keyword -jail -prefix
+	keyword -jail
 }

 start_pre()
--- a/init.d/procfs.in
+++ b/init.d/procfs.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 description="Mounts misc filesystems in /proc."

@@ -15,20 +8,66 @@ depend()
 {
 	use modules devfs
 	need localmount
-	keyword -openvz -prefix -systemd-nspawn -vserver -lxc
+	keyword -openvz -vserver -lxc
 }

 start()
 {
+	# Make sure we insert usbcore if it's a module
+	if [ -f /proc/modules -a ! -d /sys/module/usbcore -a ! -d /proc/bus/usb ]; then
+		modprobe -q usbcore
+	fi
+
+	[ -e /proc/filesystems ] || return 0
+
 	# Setup Kernel Support for miscellaneous Binary Formats
 	if [ -d /proc/sys/fs/binfmt_misc -a ! -e /proc/sys/fs/binfmt_misc/register ]; then
-		modprobe -q binfmt-misc
 		if grep -qs binfmt_misc /proc/filesystems; then
 			ebegin "Mounting misc binary format filesystem"
 			mount -t binfmt_misc -o nodev,noexec,nosuid \
 				binfmt_misc /proc/sys/fs/binfmt_misc
+			if eend $? ; then
+				local fmts
+				ebegin "Loading custom binary format handlers"
+				fmts=$(grep -hsv -e '^[#;]' -e '^[[:space:]]*$' \
+					/run/binfmt.d/*.conf \
+					@SYSCONFDIR@/binfmt.d/*.conf \
+					""/usr/lib/binfmt.d/*.conf)
+				if [ -n "${fmts}" ]; then
+					echo "${fmts}" > /proc/sys/fs/binfmt_misc/register
+				fi
 				eend $?
+			fi
 		fi
 	fi
+
+	[ "$RC_SYS" == "OPENVZ" ] && return 0
+
+	# Check what USB fs the kernel support.  Currently
+	# 2.5+ kernels, and later 2.4 kernels have 'usbfs',
+	# while older kernels have 'usbdevfs'.
+	if [ -d /proc/bus/usb -a ! -e /proc/bus/usb/devices ]; then
+		local usbfs=$(grep -Fow usbfs /proc/filesystems ||
+			grep -Fow usbdevfs /proc/filesystems)
+		if [ -n "$usbfs" ]; then
+			ebegin "Mounting USB device filesystem [$usbfs]"
+			local usbgid="$(getent group usb | \
+				sed -e 's/.*:.*:\(.*\):.*/\1/')"
+			mount -t $usbfs \
+				-o ${usbgid:+devmode=0664,devgid=$usbgid,}noexec,nosuid \
+				usbfs /proc/bus/usb
+			eend $?
+		fi
+	fi
+
+	# Setup Kernel Support for SELinux
+	if [ -d /selinux ] && ! mountinfo -q /selinux; then
+		if grep -qs selinuxfs /proc/filesystems; then
+			ebegin "Mounting SELinux filesystem"
+			mount -t selinuxfs selinuxfs /selinux
+			eend $?
+		fi
+	fi
+
 	return 0
 }
--- a/init.d/rarpd.in
+++ b/init.d/rarpd.in
@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 command=/usr/sbin/rarpd
 command_args="-f $rarpd_args"
--- a/init.d/rc-enabled.in
+++ b/init.d/rc-enabled.in
@@ -1,20 +1,12 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.

 depend()
 {
 	need localmount net
 	after *
 	before local
-	keyword -prefix
 }

 start()
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
William Hubbs	d670dbddf7	Release openrc-0.9.9.1	2012-02-24 11:13:27 -06:00
William Hubbs	f1a19aed78	Skip pam if running as root Reported-by: Piotr Karbowski <piotr.karbowski@gmail.com> X-Gentoo-Bug: 386623 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=386623	2012-02-24 09:06:51 -06:00