Begin port to GNU/kFreeBSD

This is just a minimal port to get Debian up and running; the rest will
be done later.

.gitignore

@@ -1,4 +1,4 @@
-*.gz
+*.bz2
 
 *.diff
 *.patch

AUTHORS

@@ -1,99 +0,0 @@
-Alessio Ababilov <ilovedevlinux@gmail.com>
-Alexander Berntsen <alexander@plaimi.net>
-Alexander Mezin <mezin.alexander@gmail.com>
-Alexander Tsoy <alexander@tsoy.me>
-Alexander Vershilov <alexander.vershilov@gmail.com>
-Alexander Vershilov <qnikst@gentoo.org>
-Alexander V Vershilov <qnikst@gentoo.org>
-Alexey Shvetsov <alexxy@gentoo.org>
-Alon Bar-Lev <alon.barlev@gmail.com>
-Amadeusz Żołnowski <aidecoe@aidecoe.name>
-Andrew Gregory <andrew.gregory.8@gmail.com>
-Anthony Donnelly <Amzo@archbsd.com>
-Anthony G. Basile <basile@opensource.dyc.edu>
-Anthony G. Basile <blueness@gentoo.org>
-Austin S. Hemmelgarn <ahferroin7@gmail.com>
-Benda Xu <heroxbd@gentoo.org>
-Björn Baumbach <bb@sernet.de>
-Charlie <root@uberlaptop.development.ltl>
-Chris Richards <gizmo@giz-works.com>
-Christian <christian@ch-sc.de>
-Christian Ruppert <idl0r@gentoo.org>
-Christian Wetzig <gentoo@wetzig.de>
-Christopher Head <chead@telus.net>
-Consus <consus@gmx.com>
-Daniel Mierswa <impulze@impulze.org>
-Daniel Robbins <drobbins@funtoo.org>
-Diego Elio Pettenò <flameeyes@flameeyes.eu>
-Diego Elio Pettenò <flameeyes@gmail.com>
-Diego <flameeyes@gentoo.org>
-Dirk Sondermann <ds-gentoo@dyximaq.de>
-Doug Freed <dwfreed@mtu.edu>
-Doug Goldstein <cardoe@cardoe.com>
-Ed Wildgoose <gentoo@wildgooses.com>
-Eray Aslan <eras@gentoo.org>
-Eugeny Shkrigunov <eshkrig@gmail.com>
-Fedja Beader <specing@contact.me.on.irc.freenode.net>
-Flex <frostynova@gmail.com>
-Gabriele Giacone <1o5g4r8o@gmail.com>
-Gary <admin@garyshood.com>
-Gilles Oivier <g.olivier@wanadoo.fr>
-Hank Leininger <hlein@korelogic.com>
-Ian Stakenvicius <axs@gentoo.org>
-Jakob Drexel <jake42@rommel.stw.uni-erlangen.de>
-James Le Cuirot <chewi@aura-online.co.uk>
-Jan Psota <jasiu@belsznica.pl>
-Jason Zaman <jason@perfinion.com>
-Joe Harvell <jharvell@dogpad.net>
-Joe M <joe9mail@gmail.com>
-Johan Bergström <bugs@bergstroem.nu>
-Jory A. Pratt <anarchy@gentoo.org>
-Juan RP <xtraeme@gmail.com>
-Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
-Kfir Lavi <lavi.kfir@gmail.com>
-Kirill Elagin <kirelagin@gmail.com>
-Lars Wendler <polynomial-c@gentoo.org>
-Lorand Kelemen <lorand.kelemen@indgroup.eu>
-Marc Joliet <marcec@gmx.de>
-Marien Zwart <marienz@gentoo.org>
-Michal Gorny <gentoo@mgorny.alt.pl>
-Mihai Moldovan <ionic@ionic.de>
-Mike Frysinger <vapier@gentoo.org>
-Mike Gilbert <floppym@gentoo.org>
-Nao Nakashima <nao.nakashima@gmail.com>
-Natanael Copa <natanael.copa@gmail.com>
-Nathan Phillip Brink <ohnobinki@ohnopublishing.net>
-Ned Ludd <solar@gentoo.org>
-Olivier Huber <oli.huber@gmail.com>
-Patrick Lauer <patrick@gentoo.org>
-Petre Rodan <petre.rodan@simplex.ro>
-Piotr Karbowski <piotr.karbowski@gmail.com>
-Ralph Sennhauser <sera@gentoo.org>
-Richard Yao <ryao@cs.stonybrook.edu>
-Rick Farina (ZeroChaos) <sidhayn@gmail.com>
-Rick Farina (Zero_Chaos) <zerochaos@gentoo.org>
-Robin H. Johnson <robbat2@gentoo.org>
-Robin H. Johnson <robbat2@orbis-terrarum.net>
-Robin Johnson <robbat2@gentoo.org>
-Roy Marples <roy@marples.name>
-Salah Coronya <salah.coronya@gmail.com>
-Sebastian Thorarensen <indigo176@blinkenshell.org>
-Semen Maryasin <marsoft@ya.ru>
-Sergei Trofimovich <slyfox@gentoo.org>
-Seth Robertson <in-gentoo@baka.org>
-S. Gilles <sgilles@umd.edu>
-Stefan Knoblich <s.knoblich@axsentis.de>
-Stef Simoens <stef.simoens@scarlet.be>
-Steve L <slong@rathaus.eclipse.co.uk>
-Steven Chamberlain <steven@pyro.eu.org>
-Svante Signell <svante.signell@gmail.com>
-Sven Vermeulen <sven.vermeulen@siphos.be>
-Thomas D <whissi@whissi.de>
-Thomas Pfaff <tpfaff@gmx.net>
-Trevor Summers Smith <trevorsummerssmith@gmail.com>
-Walter <walter@pratyeka.org>
-William Hubbs <w.d.hubbs@gmail.com>
-William Hubbs <williamh@gentoo.org>
-Will Miles <wmiles@sgl.com>
-Yun Zheng Hu <hu@fox-it.com>
-Yuta SATOH <nigoro.gentoo@0x100.com>

BUSYBOX.md

@@ -1,29 +0,0 @@
-# Using Busybox as your Default Shell with OpenRC
-
-If you have/bin/sh linked to busybox, you need to be aware of several
-incompatibilities between busybox's applets and the standalone
-counterparts. Since it is possible to configure busybox to not include
-these applets or to prefer the standalone counterparts, OpenRC does not
-attempt to support the busybox applets.
-
-For now, it is recommended that you disable the following busybox
-configuration settings for best results with OpenRC.
-
-CONFIG_START_STOP_DAEMON -- The start-stop-daemon applet is not compatible with
-start-stop-daemon in OpenRC.
-
-CONFIG_MOUNT -- The mount applet does not support the -O [no]_netdev options to
-skip over or include network file systems when the -a option is present.
-
-CONFIG_UMOUNT -- The umount applet does not support the -O option along with -a.
-
-CONFIG_SWAPONOFF -- The swapon applet does not support the -e option
-or recognize the nofail option in fstab.
-
-CONFIG_SETFONT -- The setfont applet does not support the -u option from kbd.
-
-CONFIG_BB_SYSCTL -- The sysctl applet does not support the --system command
-line switch.
-
-There is work to get most of these supported by busybox, so this file
-will be updated as things change.

FEATURE-REMOVAL-SCHEDULE

@@ -0,0 +1,49 @@
+The following is a list of files and features that are going to be removed in
+the source tree.  Every entry should contain what exactly is going away, why it
+is happening, and who is going to be doing the work.  When the feature is
+removed, it should also be removed from this file.
+
+---------------------------
+
+What: oldnet ADSL rp-pppoe mode
+
+When: undecided
+
+Why: Replaced by the oldnet PPP module
+
+Who:  Robin H. Johnson <robbat2@gentoo.org>
+
+---------------------------
+
+What: oldnet /etc/conf.d/wireless
+
+When: undecided
+
+Why: All configuration moved to /etc/conf.d/net
+
+Who:  Robin H. Johnson <robbat2@gentoo.org>
+
+---------------------------
+
+What: Service pause action
+
+When: Removed already, compatbility warning in place.
+
+Why: ...
+
+Who:
+
+---------------------------
+
+What: Service --startas, --chuid , --oknodo
+
+When: undecided
+
+Why: Obsolete or replaced by other options.
+	 --startas => use --name or --exec
+	 --chuid => use --user
+	 --oknodo => ignore return code instead
+
+Who:
+
+---------------------------

FEATURE-REMOVAL-SCHEDULE.md

@@ -1,78 +0,0 @@
-# Features Scheduled for Removal
-
-The following is a list of files and features that are going to be removed in
-the source tree.  Every entry should contain what exactly is going away, why it
-is happening, and who is going to be doing the work.  When the feature is
-removed, it should also be removed from this file.
-
-## Service pause action
-
-When: 1.0
-
-Why: The same affect can be obtained with the --nodeps option to stop.
-
-Who:
-
-## start-stop-daemon options --startas, --chuid , --oknodo
-
-When: 1.0
-
-Why: Obsolete or replaced by other options.
-
-* --startas => use --name or --exec
-* --chuid => use --user
-* --oknodo => ignore return code instead
-
-Who:
-
-## runscript and rc symbolic links
-
-When: 1.0
-
-Why: Deprecated in favor of openrc-run and openrc due to naming
-	 conflicts with other software.
-
-Who:
-
-## support for the opts variable in service scripts
-
-When: 1.0
-
-Why: Deprecated in favor of extra_commands, extra_started_commands
-	 and extra_stopped_commands.
-
-Who:
-
-## support for local_start and local_stop
-
-When: 1.0
-
-Why: Deprecated in favor of executable scripts in @SYSCONFDIR@/local.d
-
-Who:
-
-## the mtab service script
-
-When: force /etc/mtab to link to /proc/self/mounts in 1.0, remove
-	  service in 2.0
-
-Why: /etc/mtab should be a symbolic link to /proc/self/mounts on modern
-	 Linux systems
-
-Who:
-
-## C API Functions in rc.h
-
-If you have a c program that links to librc and uses functions from
-there, this section will list API functions which are deprecated and
-will be removed along with the reason they are being removed.
-
-### rc_getline()
-
-When: 1.0
-
-Why: The getline() function was standardized in POSIX.1-2008, so it
-	 should be available on POSIX systems.
-
-Who:
-

HISTORY.md

@@ -1,62 +0,0 @@
-# OpenRC History
-
-This history of OpenRC was written by Daniel Robbins, Roy Marples, William
-Hubbs and others.
-
-The Gentoo modular init scripts were developed by Daniel Robbins for Gentoo
-Linux 1.0_rc6 during most of 2001 and released in September 2001. After their
-development, the dependency-based init script system was maintained by a
-number of senior developers, starting with Azarah (Martin Schlemmer), with
-migration to the new init system assisted by Woodchip (Donnie Davies) who
-converted all ebuild init scripts to work with the new system. As Grant
-Goodyear notes: 
-
-"My recollection is that one of woodchip's more impressive early feats
-was the complete replacement of all of the init scripts in Portage
-for Gentoo Linux 1.0_rc6. Through 1.0_rc5 Gentoo had used fairly
-standard rc scripts modified from Stampede Linux, but for 1.0_rc6 Daniel
-Robbins (drobbins) and Martin Schlemmer (azarah) had created a new
-dependency-based init script system that is still used today. Within a
-span of days Donny rewrote every single init script in the Portage tree
-and committed new masked packages to await the release of 1.0_rc6. Thanks to
-woodchip (and drobbins and azarah, of course) the
-transition to the new init scripts was nearly painless." [1] 
-
-Roy Marples became a Gentoo/Linux developer in 2004 and wrote the modular
-network scripts for the Gentoo baselayout package. Towards the end of 2005,
-he became the primary maintainer for baselayout and the init scripts. 
-
-At the start of 2007, He announced the ongoing development of
-baselayout-2, containing a rewritten core coded in C and allowing POSIX sh
-init scripts instead of forcing the use of bash. By mid 2007, He had
-re-implemented the Gentoo init script design created by Daniel Robbins,
-using an entirely new code base. Alpha and pre-release baselayout-2
-snapshots were added to Gentoo's Portage tree as an optional component.
-
-Toward the end of 2007, Roy retired as a Gentoo developer.
-Baselayout-2 was still in the pre stage, and aside from the gentoo-fbsd
-users, it was masked. However, He desired to keep the baselayout-2
-project moving forward as an independent project. The Gentoo Council
-permitted Him to release OpenRC under the 2-clause BSD license,
-managed by him as an external project. 
-
-Around mid-2010, Roy decided to no longer maintain OpenRC. At this
-point, he transferred development back to Gentoo.
-
-William Hubbs, and several other Gentoo developers,  started working on
-OpenRC around this point and brought OpenRC-0.8.x to Gentoo Linux's stable
-tree in 2011.
-
-In 2013 the OpenRC team became independent from Gentoo again and moved primary
-development to github.
-
-Daniel Robbins continues to maintain an independent, forked
-version of OpenRC for Funtoo Linux, which includes a Funtoo-specific network
-configuration system. 
-
-On 17-Dec-2015 utc, Roy gave the OpenRC developers permission to replace his
-copyrights in all source files with a generic Copyright assertion for
-the OpenRC developers as long as we keep the original copyright in the
-binaries and  LICENSE file.
-
-[1] http://www.gentoo.org/news/en/gwn/20040426-newsletter.xml

LICENSE

@@ -1,24 +0,0 @@
-Copyright (c) 2007-2008, Roy Marples <roy@marples.name>
-Copyright (c) 2007-2015, the OpenRC authors
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice,
-   this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.

Makefile

@@ -1,17 +1,8 @@
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# OpenRC Makefile
-# See the Authors file at the top-level directory of this distribution and
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
+# Released under the 2-clause BSD license.
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
-TOP:=		${dir ${realpath ${firstword ${MAKEFILE_LIST}}}}
+include Makefile.inc
-MK=			${TOP}/mk
-
-include ${TOP}/Makefile.inc
 
 SUBDIR=		conf.d etc init.d local.d man scripts sh src sysctl.d
 
@@ -26,11 +17,12 @@ SUBDIR+=	runlevels
 
 INSTALLAFTER=	_installafter
 
+MK= 		mk
 include ${MK}/sys.mk
 include ${MK}/os.mk
 include ${MK}/subdir.mk
 include ${MK}/dist.mk
-include ${MK}/gitver.mk
+include ${MK}/git.mk
 
 _installafter:
 ifeq (${MKPREFIX},yes)

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.23.2
+VERSION=	0.12.4
 PKG=		${NAME}-${VERSION}

NEWS.md

@@ -1,157 +0,0 @@
-# OpenRC NEWS
-
-This file will contain a list of notable changes for each release. Note
-the information in this file is in reverse order.
-
-## OpenRC-0.23
-
-The tmpfiles.d processing code, which was part of previous versions of
-OpenRC, has been separated into its own package [1]. If you need to
-process systemd style tmpfiles.d files, please install this package.
-
-[1] https://github.com/openrc/opentmpfiles
-
-## OpenRC-0.22
-
-In previous versions of OpenRC, configuration information was processed
-so that service-specific configuration stored in /etc/conf.d/* was
-overridden by global configuration stored in /etc/rc.conf. This release
-reverses that. Global configuration is now overridden by
-service-specific configuration.
-
-The swapfiles service, which was basically a copy of the swap service,
-has been removed. If you are only using swap partitions, this change
-will not affect you. If you are using swap files, please adjust the
-dependencies of the swap service as shown in /etc/conf.d/swap.
-
-## OpenRC-0.21
-
-This version adds a daemon supervisor which can start daemons and
-restart them if they crash. See supervise-daemon-guide.md in the
-distribution for details on its use.
-
-It is now possible to mark certain mount points as critical. If these
-mount points are unable to be mounted, localmount or netmount will fail.
-This is handled in /etc/conf.d/localmount and /etc/conf.d/netmount. See
-these files for the setup.
-
-The deprecation messages in 0.13.x for runscript and rc are now
-made visible in preparation for the removal of these binaries in 1.0.
-
-The steps you should take to get rid of these warnings is to run openrc
-in initialization steps instead of rc and change the shebang lines in
-service scripts to refer to "openrc-run" instead of "runscript".
-
-In 0.21.4, a modules-load service was added. This works like the
-equivalent service in systemd. It looks for files named *.conf first in
-/usr/lib/modules-load.d, then /run/modules-load.d, then
-/etc/modules-load.d. These files contain a list of modules, one per
-line, which should be loaded into the kernel. If a file name appears in
-/run/modules-load.d, it overrides a file of the same name in
-/usr/lib/modules-load.d. A file appearing in /etc/modules-load.d
-overrides a file of the same name in both previous directories.
-
-## OpenRC-0.19
-
-This version adds a net-online service. By default, this
-service will check all known network interfaces for a configured
-interface or a carrier. It will register as started only when all
-interfaces are configured and there is at least a carrier on one
-interface. The behaviour of this service can be modified in
-/etc/conf.d/net-online.
-
-Currently, this only works on Linux, but if anyone wants to port to
-*bsd, that would be welcomed.
-
-## OpenRC-0.18.3
-
-Modern Linux systems expect /etc/mtab to be a symbolic link to
-/proc/self/mounts. Reasons for this change include support for mount
-namespaces, which will not work if /etc/mtab is a file.
-By default, the mtab service enforces this on each reboot.
-
-If you find that this breaks your system in some way, please do the
-following:
-
-- Set mtab_is_file=yes in /etc/conf.d/mtab.
-
-- Restart mtab. This will recreate the /etc/mtab file.
-
-- Check for an issue on https://github.com/openrc/openrc/issues
-  explaining why you need /etc/mtab to be a file. If there isn't one,
-  please open one and explain in detail why you need this to be a file.
-  If there is one, please add your comments to it. Please give concrete
-  examples of why  it is important that /etc/mtab be a file instead of a
-  symbolic link. Those comments will be taken into consideration for how
-  long to keep supporting mtab as a file or when the support can be
-  removed.
-
-## OpenRC-0.18
-
-The behaviour of localmount and netmount in this version is changing. In
-the past, these services always started successfully. In this version,
-they will be able to fail if file systems they mount fail to mount. If
-you have file systems listed in fstab which should not be mounted at
-boot time, make sure to add noauto to the mount options. If you have
-file systems that you want to attempt to mount at boot time but failure
-should be allowed, add nofail to the mount options for these file
-systems in fstab.
-
-## OpenRC-0.14
-
-The binfmt service, which registers misc binary formats with the Linux
-kernel, has been separated from the procfs service. This service will be
-automatically added to the boot runlevel for new Linux installs. When
-you upgrade, you will need to use rc-update to add it to your boot
-runlevel.
-
-The procfs service no longer automounts the deprecated usbfs and
-usbdevfs file systems. Nothing should be using usbdevfs any longer, and
-if you still need usbfs it can be added to fstab.
-
-Related to the above change, the procfs service no longer attempts to
-modprobe the usbcore module. If your device manager does not load it,
-you will need to configure the modules service to do so.
-
-The override order of binfmt.d and tmpfiles.d directories has been
-changed to match systemd. Files in /run/binfmt.d and /run/tmpfiles.d
-override their /usr/lib counterparts, and files in the /etc counterparts
-override both /usr/lib and /run.
-
-## OpenRC-0.13.2
-
-A chroot variable has been added to the service script variables.
-This fixes the support for running a service in a chroot.
-This is documented in man 8 openrc-run.
-
-The netmount service now mounts nfs file systems.
-This change was made to correct a fix for an earlier bug.
-
-## OpenRC-0.13
-
-/sbin/rc was renamed to /sbin/openrc and /sbin/runscript was renamed to
-/sbin/openrc-run due to naming conflicts with other software.
-
-Backward compatible symbolic links are currently in place so your
-system will keep working if you are using the old names; however, it is
-strongly advised that you migrate to the new names because the symbolic
-links will be removed in the future.
-Warnings have been added to assist with this migration; however, due to the
-level of noise they produce, they only appear in verbose mode in this release.
-
-The devfs script now handles the initial mounting and setup of the
-/dev directory. If /dev has already been mounted by the kernel or an
-initramfs, devfs will remount /dev with the correct mount options
-instead of mounting a second /dev over the existing mount point.
-
-It attempts to mount /dev from fstab first if an entry exists there. If
-it doesn't it attempts to mount devtmpfs if it is configured in the
-kernel. If not, it attempts to mount tmpfs.
-If none of these is available, an error message is displayed and static
-/dev is assumed.
-
-## OpenRC-0.12
-
-The net.* scripts, originally from Gentoo Linux, have
-been removed. If you need these scripts, look for a package called
-netifrc, which is maintained by them.

README

@@ -0,0 +1,92 @@
+OpenRC README
+
+
+Installation
+------------
+make install
+Yup, that simple. Works with GNU make.
+
+You may wish to tweak the installation with the below arguments
+PROGLDFLAGS=-static
+LIBNAME=lib64
+DESTDIR=/tmp/openrc-image
+MKNET=no
+MKPAM=pam
+MKPREFIX=yes
+MKPKGCONFIG=no
+MKSELINUX=yes
+MKSTATICLIBS=no
+MKTERMCAP=ncurses
+MKTERMCAP=termcap
+MKTOOLS=yes
+PKG_PREFIX=/usr/pkg
+LOCAL_PREFIX=/usr/local
+PREFIX=/usr/local
+
+We don't support building a static OpenRC with PAM.
+You may need to use PROGLDFLAGS=-Wl,-Bstatic on glibc instead of just -static.
+If you debug memory under valgrind, add -DDEBUG_MEMORY to your CPPFLAGS
+so that all malloc memory should be freed at exit.
+If you are building OpenRC for a Gentoo Prefix installation, add
+MKPREFIX=yes.
+
+You can also brand OpenRC if you so wish like so
+BRANDING=\"Gentoo/$(uname -s)\"
+
+PKG_PREFIX should be set to where packages install to by default.
+LOCAL_PREFIX should be set when to where user maintained packages are.
+Only set LOCAL_PREFIX if different from PKG_PREFIX.
+PREFIX should be set when OpenRC is not installed to /.
+
+If any of the following files exist then we do not overwrite them
+/etc/devd.conf
+/etc/rc
+/etc/rc.shutdown
+/etc/conf.d/*
+
+rc and rc.shutdown are the hooks from the BSD init into OpenRC.
+devd.conf is modified from FreeBSD to call /etc/rc.devd which is a generic
+hook into OpenRC.
+inittab is the same, but for SysVInit as used by most Linux distributions.
+This can be found in the support folder.
+Obviously, if you're installing this onto a system that does not use OpenRC
+by default then you may wish to backup the above listed files, remove them
+and then install so that the OS hooks into OpenRC.
+
+init.d.misc is not installed by default as the scripts will need
+tweaking on a per distro basis. They are also non essential to the operation
+of the system.
+
+As of OpenRC-0.12, the net.* scripts, originally from Gentoo Linux, have
+been removed. If you need these scripts, look for a package called
+netifrc, which is maintained by them.
+
+Reporting Bugs
+--------------
+Since Gentoo Linux is hosting OpenRC development, Bugs should go to
+the Gentoo Bugzilla:
+	http://bugs.gentoo.org/
+They should be filed under the "Gentoo Hosted Projects" product and
+the "openrc" component.
+
+
+History - by Roy Marples
+------------------------
+I became a Gentoo/Linux developer in 2004 and wrote the modular network
+scripts for the Gentoo baselayout package. baselayout is a collection of
+bash scripts to bring up your computer and its services.
+Then towards the end of 2005 I found myself as the primary maintainer
+for baselayout.
+
+At the start of 2007, baselayout-2 is announced to the world, re-writing the
+core of baselayout in C and allowing POSIX sh init scripts instead of
+forcing the use of bash. By Mid 2007 I have re-written everything, including
+init scripts, and alpha and pre baselayout-2 snapshots where put into Gentoo.
+Towards the end of 2007 I retired as a Gentoo developer for reasons I won't
+go into here. baselayout-2 was still in the pre stage, and aside from the
+fbsd users, it was masked everywhere. However, I also desired to keep the
+baselayout-2 project alive, but outside of Gentoo and into other projects
+such as FreeBSD.
+
+As such, the Gentoo Council have allowed the creation of OpenRC under the
+2 clause BSD license, managed by me as an external project.

README.busybox

@@ -0,0 +1,28 @@
+Using Busybox as your Default Shell
+-----------------------------------
+
+
+If you have/bin/sh linked to busybox, you need to be aware of several
+incompatibilities between busybox's applets and the standalone
+counterparts. Since it is possible to configure busybox to not include
+these applets or to prefer the standalone counterparts, OpenRC does not
+attempt to support the busybox applets.
+
+All of these apply to busybox 1.20.2, which is the current version of
+busybox as of this writing.
+
+1. The start-stop-daemon applet is not compatible with start-stop-daemon
+in OpenRC. Please make sure CONFIG_START_STOP_DAEMON is not set to y in
+the configuration file you use to build busybox.
+
+2. The -O option for the mount applet does not support the [no]_netdev
+options from util-linux for handling network file systems.
+
+3. The umount applet does not support the -O option from util-linux.
+
+4. The swapon applet does not support the -e option from util-linux.
+
+5. the setfont applet does not support the -u option from kbd.
+
+There is work to get most of these supported by busybox, so this file
+will be updated as things change.

README.md

@@ -1,96 +0,0 @@
-# OpenRC README
-
-OpenRC is a dependency-based init system that works with the
-system-provided init program, normally `/sbin/init`. Currently, it does
-not have an init program of its own.
-
-## Installation
-
-OpenRC requires GNU make.
-
-Once you have GNU Make installed, the default OpenRC installation can be
-executed using this command:
-
-make install
-
-## Configuration
-
-You may wish to configure the installation by passing one or more of the
-below arguments to the make command
-
-```
-PROGLDFLAGS=-static
-LIBNAME=lib64
-DESTDIR=/tmp/openrc-image
-MKNET=no
-MKPAM=pam
-MKPREFIX=yes
-MKPKGCONFIG=no
-MKSELINUX=yes
-MKSTATICLIBS=no
-MKTERMCAP=ncurses
-MKTERMCAP=termcap
-MKTOOLS=yes
-PKG_PREFIX=/usr/pkg
-LOCAL_PREFIX=/usr/local
-PREFIX=/usr/local
-BRANDING=\"Gentoo/$(uname -s)\"
-```
-
-## Notes
-
-We don't support building a static OpenRC with PAM.
-
-You may need to use `PROGLDFLAGS=-Wl,-Bstatic` on glibc instead of just `-static`.
-
-If you are building OpenRC for a Gentoo Prefix installation, add `MKPREFIX=yes`.
-
-`PKG_PREFIX` should be set to where packages install to by default.
-
-`LOCAL_PREFIX` should be set when to where user maintained packages are.
-Only set `LOCAL_PREFIX` if different from `PKG_PREFIX`.
-
-`PREFIX` should be set when OpenRC is not installed to /.
-
-If any of the following files exist then we do not overwrite them
-
-```
-/etc/devd.conf
-/etc/rc
-/etc/rc.shutdown
-/etc/conf.d/*
-```
-
-`rc` and `rc.shutdown` are the hooks from the BSD init into OpenRC.
-
-`devd.conf` is modified from FreeBSD to call `/etc/rc.devd` which is a
-generic hook into OpenRC.
-
-`inittab` is the same, but for SysVInit as used by most Linux distributions.
-This can be found in the support folder.
-
-Obviously, if you're installing this onto a system that does not use
-OpenRC by default then you may wish to backup the above listed files,
-remove them and then install so that the OS hooks into OpenRC.
-
-`init.d.misc` is not installed by default as the scripts will need
-tweaking on a per distro basis. They are also non essential to the
-operation of the system.
-
-## Reporting Bugs
-
-If you are using Gentoo Linux, bugs can be filed on their bugzilla under
-the `gentoo hosted projects` product and the `openrc` component [1].
-Otherwise, you can report issues on our github [2].
-
-Better yet, if you can contribute code, please feel free to submit pull
-requests [3].
-
-## IRC Channel
-
-We have an official irc channel, #openrc on freenode, feel free to join
-us there.
-
-[1]	https://bugs.gentoo.org/
-[2]	https://github.com/openrc/openrc/issues
-[3]	https://github.com/openrc/openrc/pulls

STYLE

@@ -1,23 +1,23 @@
-# OpenRC Style Guide
-
 This is the openrc style manual.  It governs the coding style of all code
 in this repository.  Follow it.  Contact openrc@gentoo.org for any questions
 or fixes you might notice.
 
-## C CODE
+##########
+# C CODE #
+##########
 
-The BSD Kernel Normal Form (KNF) style is used [1]. Basically, it is like
+The BSD Kernel Normal Form (KNF) style is used:
-K&R/LKML, but wrapped lines that are indented use 4 spaces. Here are the
+	http://en.wikipedia.org/wiki/Indent_style#BSD_KNF_style
-highlights.
+Basically, it's like K&R/LKML, but wrapped lines that are indented use 4 spaces.
 
-- no trailing whitespace
+Highlights:
-- indented code use tabs (not line wrapped)
+	- no trailing whitespace
-- cuddle the braces (except for functions)
+	- indented code use tabs (not line wrapped)
-- space after native statements and before paren (for/if/while/...)
+	- cuddle the braces (except for functions)
-- no space between function and paren
+	- space after native statements and before paren (for/if/while/...)
-- pointer asterisk cuddles the variable, not the type
+	- no space between function and paren
+	- pointer asterisk cuddles the variable, not the type
 
-```
 void foo(int c)
 {
 	int ret = 0;
@@ -32,15 +32,16 @@ void foo(int c)
 
 	return ret;
 }
-```
 
-## COMMIT MESSAGES
+##################
+# COMMIT MESSAGES #
+##################
 
 The following is an example of a correctly formatted git commit message
 for this repository. Most of this information came from this blog post
-[2], so I would like to thank the author.
+[1], so I would like to thank the author.
 
-```
+### cut here ###
 Capitalized, short (50 chars or less) summary
 
 More detailed explanatory text, if necessary.  Wrap it to about 72
@@ -66,7 +67,7 @@ Further paragraphs come after blank lines.
 Reported-by: User Name <email>
 X-[Distro]-Bug: BugID
 X-[Distro]-Bug-URL: URL for the bug (on the distribution's web site typically)
-```
+### cut here ###
 
 If you did not write the code and the patch does not include authorship
 information in a format git can use, please use the --author option of the
@@ -80,5 +81,5 @@ different from the author and committer.
   *BSD. Also, [Distro] should be replaced with the name of the
   distribution, e.g. X-Gentoo-Bug.
 
-[1]	http://en.wikipedia.org/wiki/Indent_style#BSD_KNF_style
+[1] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html
-[2] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html
+

conf.d/.gitignore

@@ -0,0 +1,2 @@
+network
+staticroute

conf.d/Makefile

@@ -1,20 +1,28 @@
 include ../mk/net.mk
 
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount netmount swap urandom ${CONF-${OS}}
+CONF=	bootmisc fsck hostname localmount netmount urandom tmpfiles \
+		${CONF-${OS}}
 
 ifeq (${MKNET},yes)
 CONF+= network staticroute
+TARGETS+=	network staticroute
+CLEANFILES+=	network staticroute
 endif
 
 MK=	../mk
 include ${MK}/os.mk
 
-CONF-FreeBSD=	ipfw modules moused powerd rarpd savecore syscons
+CONF-FreeBSD=	ipfw moused powerd rarpd savecore syscons
 
-CONF-Linux=	consolefont devfs dmesg hwclock keymaps killprocs modules mtab \
+CONF-Linux=	consolefont dmesg hwclock keymaps killprocs modules
-	net-online
 
 CONF-NetBSD=	moused rarpd savecore
 
 include ${MK}/scripts.mk
+
+network: network.in network${SFX}
+	cat $^ > $@
+
+staticroute: staticroute${SFX}
+	cp $@${SFX} $@

conf.d/bootmisc

@@ -8,8 +8,3 @@ wipe_tmp="YES"
 # Write the initial dmesg log into /var/log/dmesg after boot
 # This may be useful if you need the kernel boot log afterwards
 log_dmesg="YES"
-
-# Save the previous dmesg log to dmesg.old
-# This may be useful if you need to compare the current boot to the
-# previous one.
-#previous_dmesg=no

conf.d/devfs

@@ -1,8 +0,0 @@
-# OpenRC will attempt each of the following in succession to mount /dev.
-#
-# 1. If there is an entry for /dev in fstab, it will be used.
-# 2. If devtmpfs is defined in the kernel, it will be used.
-# 3. If tmpfs is defined in the kernel, it will be used.
-#
-# Set this to yes if you do not want OpenRC to attempt to mount /dev.
-# skip_mount_dev="NO"

conf.d/fsck

@@ -32,9 +32,3 @@ fsck_on_battery="YES"
 # This is useful when periodic filesystem checks are causing undesirable
 # delays at startup, but such delays at shutdown are acceptable.
 fsck_shutdown="NO"
-
-# fsck_abort_on_errors can be set to no to cause fsck to not abort on
-# errors.
-# This is useful when periodic filesystem checks are causing undesirable
-# aborts.
-fsck_abort_on_errors="YES"

conf.d/hwclock

@@ -7,8 +7,8 @@ clock="UTC"
 # If you want the hwclock script to set the system time (software clock)
 # to match the current hardware clock during bootup, leave this
 # commented out.
-# However, you can set this to "NO" if you are running a modern kernel
+# However, you can set this to "NO" ifyou are running a modern kernel
-# and using NTP to synchronize your system clock.
+# with CONFIG_RTC_HCTOSYS set to y and your hardware clock set to UTC.
 #clock_hctosys="YES"
 
 # If you do not want to set the hardware clock to the current system

conf.d/keymaps

@@ -18,6 +18,6 @@ extended_keymaps=""
 # For a list of valid sets, run `dumpkeys --help`
 dumpkeys_charset=""
 
-# Some fonts map AltGr-E to the currency symbol instead of the Euro.
+# Some fonts map AltGr-E to the currency symbol ¤ instead of the Euro €
 # To fix this, set to "yes"
 fix_euro="NO"

conf.d/localmount

@@ -1,10 +1,3 @@
 # Stop the unmounting of certain points.
 # This could be useful for some NFS related work.
 #no_umounts="/dir1:/var/dir2"
-#
-# Mark certain mount points as critical.
-# This contains aspace separated list of mount points which should be
-# considered critical. If one of these mount points cannot be mounted,
-# localmount will fail.
-# By default, this is empty.
-#critical_mounts="/home /var"

conf.d/modules

@@ -1,22 +1,18 @@
-# Linux users can define a list of modules for a specific kernel version,
+# You can define a list modules for a specific kernel version,
-# a released kernel version, a main kernel version or all kernel versions.
+# a released kernel version, a main kernel version or just a list.
 # The most specific versioned variable will take precedence.
-# FreeBSD users can only use the modules="foo bar" setting.
 #modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
 #modules_2_6_23="tun ieee1394"
 #modules_2_6="tun"
 #modules_2="ipv6"
 #modules="ohci1394"
 
-# Linux users can give modules a different name when they load - the new name
+# You can give modules a different name when they load - the new name
 # will also be used to pick arguments below.
-# This is not supported on FreeBSD.
 #modules="dummy:dummy1"
 
-# Linux users can give the modules some arguments if needed, per version
+# Give the modules some arguments if needed, per version if necessary.
-# if necessary.
 # Again, the most specific versioned variable will take precedence.
-# This is not supported on FreeBSD.
 #module_ieee1394_args="debug"
 #module_ieee1394_args_2_6_23_gentoo_r5="debug2"
 #module_ieee1394_args_2_6_23="debug3"

conf.d/mtab

@@ -1,5 +0,0 @@
-# This setting controls whether /etc/mtab is a file or symbolic link.
-# Most of the time, you shouldn't touch this. However, if the default
-# breaks your system in some way, please see the NEWS.md file that comes
-# with OpenRC for the actions to take.
-# mtab_is_file=no

conf.d/net-online

@@ -1,15 +0,0 @@
-# The interfaces setting controls which interfaces the net-online
-# service considers in deciding whether the network is active. The
-# default is all interfaces that support ethernet.
-#interfaces=""
-
-# This setting controls whether a ping to the default gateway is
-# included in the test for network connectivity after all interfaces
-# are active.
-#ping_default_gateway=no
-
-# The timeout setting controls how long the net-online service waits
-# for the network to be configured.
-# The default is 120 seconds.
-# if this is set to 0, the wait is infinite.
-#timeout=120

conf.d/netmount

@@ -25,11 +25,11 @@
 #rc_need="net.eth1 net.eth2"
 #
 # If you are using a dynamic network management tool like
-# NetworkManager, dhcpcd in standalone mode, wicd, badvpn-ncd, etc, to
+# networkmanager, dhcpcd in standalone mode, wicd, badvpn-ncd, etc, to
 # manage the network interfaces with the routes to your netmounts, you
 # should list that tool.
 #
-#rc_need="NetworkManager"
+#rc_need="networkmanager"
 #rc_need="dhcpcd"
 #rc_need="wicd"
 #
@@ -38,10 +38,3 @@
 # other words, please change it to be more suited to your system.
 #
 rc_need="net"
-#
-# Mark certain mount points as critical.
-# This contains aspace separated list of mount points which should be
-# considered critical. If one of these mount points cannot be mounted,
-# netmount will fail.
-# By default, this is empty.
-#critical_mounts="/home /var"

conf.d/network

@@ -1,80 +0,0 @@
-# Assign static IP addresses and run custom scripts per interface.
-# Seperate commands with ;
-# Prefix with ! to run a shell script.
-# Use \$int to represent the interface
-#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
-
-# You also have ifup_eth0 and ifdown_eth0 to run other commands when
-# eth0 is started and stopped.
-# You should note that we don't stop the network at system shutdown by default.
-# If you really need this, then set keep_network=NO
-
-# Lastly, the interfaces variable pulls in virtual interfaces that cannot
-# be automatically detected.
-#interfaces="br0 bond0 vlan0"
-
-# You can also use files instead of variables here if you like:
-# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0
-# /etc/ip.eth0 is equivalent to ifconfig_eth0
-# /etc/ifup.eth0 is equivalent to ifup_eth0
-# /etc/ifdown.eth0 is equivalent to ifdown_eth0
-# Any files found will automatically be put into the interfaces variable.
-# You don't need to escape variables in files, so use $int instead of \$int.
-
-# If you require DHCP, you should install dhcpcd and add it to the boot or
-# default runlevel.
-
-# NIS users can set the domain name here
-#domainname="foobar"
-
-# You can add a default route.
-# The way this is done is slightly different depending on the operating system.
-#
-# *BSD:
-#defaultroute="192.168.0.1"
-#defaultroute6="2001:a:b:c"
-#Hurd/Linux (ifconfig):
-#defaultroute="gw 192.168.0.1"
-#defaultroute6="gw 2001:a:b:c"
-
-# The remainder of this file applies to Linux only and shows how
-# iproute2 is supported along with other examples.
-
-# ifconfig under Linux is not that powerful and doesn't easily handle
-# multiple addresses
-# On the other hand, iproute2 is quite powerful and is also supported
-#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
-
-# You can also use iproute2 to add the default route.
-#defaultiproute="via 192.168.0.1"
-#defaultiproute6="via 2001:a:b:c"
-
-# ip doesn't handle MTU like ifconfig, but we can do it like so
-#ifup_eth0="ip link set \$int mtu 1500"
-
-# Create a bonded interface
-#interfaces="bond0"
-#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
-#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
-#ifdown_bond0="rmmod bonding"
-
-# Create tap interface and a bridge interface.
-# We add the tap to the bridge.
-# An external program, like dhcpcd, will configure the IP on the bridge
-#interfaces="tun0 br0"
-#ifup_tun0="tunctl -t \$int"
-#ifdown_tun0="tunctl -d \$int"
-#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
-#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
-
-# Create VLAN
-#interfaces="eth0_2 eth0_3 eth0_4"
-#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
-#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
-#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
-#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
-#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
-
-# Normally you would use wpa_supplicant to configure wireless, but you can
-# use iwconfig also
-#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

conf.d/network.BSD.in

@@ -0,0 +1,4 @@
+
+# You can assign a default route
+#defaultroute="192.168.0.1"
+#defaultroute6="2001:a:b:c"

conf.d/network.Linux.in

@@ -0,0 +1,43 @@
+
+# You can assign a default route
+#defaultroute="gw 192.168.0.1"
+#defaultroute6="gw 2001:a:b:c"
+
+# ifconfig under Linux is not that powerful and doesn't easily handle
+# multiple addresses
+# On the other hand, ip (iproute2) is quite powerful and is also supported
+#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
+
+# You can also use ip to add the default route.
+#defaultiproute="via 192.168.0.1"
+#defaultiproute6="via 2001:a:b:c"
+
+# ip doesn't handle MTU like ifconfig, but we can do it like so
+#ifup_eth0="ip link set \$int mtu 1500"
+
+# Create a bonded interface
+#interfaces="bond0"
+#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
+#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
+#ifdown_bond0="rmmod bonding"
+
+# Create tap interface and a bridge interface.
+# We add the tap to the bridge.
+# An external program, like dhcpcd, will configure the IP on the bridge
+#interfaces="tun0 br0"
+#ifup_tun0="tunctl -t \$int"
+#ifdown_tun0="tunctl -d \$int"
+#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
+#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
+
+# Create VLAN
+#interfaces="eth0_2 eth0_3 eth0_4"
+#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
+#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
+#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
+#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
+#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
+
+# Normally you would use wpa_supplicant to configure wireless, but you can
+# use iwconfig also
+#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

conf.d/network.in

@@ -0,0 +1,28 @@
+# Assign static IP addresses and run custom scripts per interface.
+# Seperate commands with ;
+# Prefix with ! to run a shell script.
+# Use \$int to represent the interface
+#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
+
+# You also have ifup_eth0 and ifdown_eth0 to run other commands when
+# eth0 is started and stopped.
+# You should note that we don't stop the network at system shutdown by default.
+# If you really need this, then set keep_network=NO
+
+# Lastly, the interfaces variable pulls in virtual interfaces that cannot
+# be automatically detected.
+#interfaces="br0 bond0 vlan0"
+
+# You can also use files instead of variables here if you like:
+# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0
+# /etc/ip.eth0 is equivalent to ifconfig_eth0
+# /etc/ifup.eth0 is equivalent to ifup_eth0
+# /etc/ifdown.eth0 is equivalent to ifdown_eth0
+# Any files found will automatically be put into the interfaces variable.
+# You don't need to escape variables in files, so use $int instead of \$int.
+
+# If you require DHCP, you should install dhcpcd and it to the boot or
+# default runlevel.
+
+# NIS users can set the domain name here
+#domainname="foobar"

conf.d/staticroute

@@ -1,26 +0,0 @@
-# Static routes are defined differently depending on your operating
-# system, so please be sure to use the correct syntax.
-# Do not use this file to define the default route.
-# In all settings, multiple routes should be separated using ; or new lines.
-
-# Define static routes on Linux using route. See route(8) for syntax.
-#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
-#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
-
-# Define static routes on Linux using iproute2. See ip(8) for syntax.
-#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"
-
-# Define static routes on GNU/Hurd. See route(8) for syntax.
-# /etc/route.conf(5) takes precedence over this configuration.
-# FIXME: "net ..." not supported
-#staticroute="net 192.168.0.0 -netmask 255.255.255.0 --address 10.73.1.1
-#net 192.168.1.0 -netmask 255.255.255.0 --address 10.73.1.1"
-
-# Define static routes on GNU/KFreeBSD. See route(8) for syntax.
-#staticroute="net 192.168.0.0 10.73.1.1 netmask 255.255.255.0
-#net 192.168.1.0 10.73.1.1 netmask 255.255.255.0"
-
-# Define static routes on other BSD systems. See route(8) for syntax.
-# /etc/route.conf(5) takes precedence over this configuration.
-#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
-#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.BSD.in

@@ -0,0 +1,6 @@
+# Separate multiple routes using ; or new lines.
+# /etc/route.conf(5) takes precedence over this configuration.
+
+# Example static routes. See route(8) for syntax.
+#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
+#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.Linux.in

@@ -0,0 +1,8 @@
+# Separate multiple routes using ; or new lines.
+
+# Example static routes. See route(8) for syntax.
+#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
+#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
+
+# Example static routes using iproute2. See ip(8) for syntax.
+#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"

conf.d/swap

@@ -1,13 +0,0 @@
-# If you are only using local swap partitions, you should not change
-# this file. Otherwise, you need to uncomment the below rc_before line
-# followed by the appropriate rc_need line.
-#rc_before="!localmount"
-#
-# If you are using swap files stored on local file systems, uncomment
-# this line.
-#rc_need="localmount"
-#
-# If you are using swap files stored on network file systems or swap
-# partitions stored on network block devices such as iSCSI, uncomment
-# this line.
-#rc_need="netmount"

conf.d/tmpfiles

@@ -0,0 +1,3 @@
+# Extra options for tmpfiles.sh
+#tmpfiles_opts="--verbose"
+tmpfiles_opts=""

etc/.gitignore

@@ -1,2 +1,3 @@
+rc.conf
 rc
 rc.shutdown

etc/Makefile

@@ -1,8 +1,10 @@
 DIR=	${SYSCONFDIR}
-SRCS=	rc.in rc.shutdown.in
+SRCS=	rc.conf.in rc.in rc.shutdown.in
 BIN=	${BIN-${OS}}
 CONF=	rc.conf ${BIN-${OS}}
 
+CLEANFILES+=	rc.conf
+
 MK=	../mk
 include ${MK}/os.mk
 
@@ -21,3 +23,6 @@ CONF-NetBSD=
 SED_EXTRA=	${SED_EXTRA-${OS}}
 
 include ${MK}/scripts.mk
+
+rc.conf: rc.conf.in rc.conf.${OS}
+	${SED} ${SED_REPLACE} ${SED_EXTRA} $^ > $@

etc/rc.conf

@@ -1,250 +0,0 @@
-# Global OpenRC configuration settings
-
-# Set to "YES" if you want the rc system to try and start services
-# in parallel for a slight speed improvement. When running in parallel we
-# prefix the service output with its name as the output will get
-# jumbled up.
-# WARNING: whilst we have improved parallel, it can still potentially lock
-# the boot process. Don't file bugs about this unless you can supply
-# patches that fix it without breaking other things!
-#rc_parallel="NO"
-
-# Set rc_interactive to "YES" and you'll be able to press the I key during
-# boot so you can choose to start specific services. Set to "NO" to disable
-# this feature. This feature is automatically disabled if rc_parallel is
-# set to YES.
-#rc_interactive="YES"
-
-# If we need to drop to a shell, you can specify it here.
-# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
-# otherwise /bin/sh
-# Linux users could specify /sbin/sulogin
-#rc_shell=/bin/sh
-
-# Do we allow any started service in the runlevel to satisfy the dependency
-# or do we want all of them regardless of state? For example, if net.eth0
-# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
-# both will be started, but services that depend on 'net' will work if either
-# one comes up. With rc_depend_strict="YES" we would require them both to
-# come up.
-#rc_depend_strict="YES"
-
-# rc_hotplug controls which services we allow to be hotplugged.
-# A hotplugged service is one started by a dynamic dev manager when a matching
-# hardware device is found.
-# Hotplugged services appear in the "hotplugged" runlevel.
-# If rc_hotplug is set to any value, we compare the name of this service
-# to every pattern in the value, from left to right, and we allow the
-# service to be hotplugged if it matches a pattern, or if it matches no
-# patterns. Patterns can include shell wildcards.
-# To disable services from being hotplugged, prefix patterns with "!".
-#If rc_hotplug is not set or is empty, all hotplugging is disabled.
-# Example - rc_hotplug="net.wlan !net.*"
-# This allows net.wlan and any service not matching net.* to be hotplugged.
-# Example - rc_hotplug="!net.*"
-# This allows services that do not match "net.*" to be hotplugged.
-
-# rc_logger launches a logging daemon to log the entire rc process to
-# /var/log/rc.log
-# NOTE: Linux systems require the devfs service to be started before
-# logging can take place and as such cannot log the sysinit runlevel.
-#rc_logger="NO"
-
-# Through rc_log_path you can specify a custom log file.
-# The default value is: /var/log/rc.log
-#rc_log_path="/var/log/rc.log"
-
-# If you want verbose output for OpenRC, set this to yes. If you want
-# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
-#rc_verbose=no
-
-# By default we filter the environment for our running scripts. To allow other
-# variables through, add them here. Use a * to allow all variables through.
-#rc_env_allow="VAR1 VAR2"
-
-# By default we assume that all daemons will start correctly.
-# However, some do not - a classic example is that they fork and return 0 AND
-# then child barfs on a configuration error. Or the daemon has a bug and the
-# child crashes. You can set the number of milliseconds start-stop-daemon
-# waits to check that the daemon is still running after starting here.
-# The default is 0 - no checking.
-#rc_start_wait=100
-
-# rc_nostop is a list of services which will not stop when changing runlevels.
-# This still allows the service itself to be stopped when called directly.
-#rc_nostop=""
-
-# rc will attempt to start crashed services by default.
-# However, it will not stop them by default as that could bring down other
-# critical services.
-#rc_crashed_stop=NO
-#rc_crashed_start=YES
-
-# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
-# output.
-#rc_nocolor=NO
-
-##############################################################################
-# MISC CONFIGURATION VARIABLES
-# There variables are shared between many init scripts
-
-# Set unicode to YES to turn on unicode support for keyboards and screens.
-#unicode="NO"
-
-# This is how long fuser should wait for a remote server to respond. The
-# default is 60 seconds, but  it can be adjusted here.
-#rc_fuser_timeout=60
-
-# Below is the default list of network fstypes.
-#
-# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
-# nfs nfs4 ocfs2 shfs smbfs
-#
-# If you would like to add to this list, you can do so by adding your
-# own fstypes to the following variable.
-#extra_net_fs_list=""
-
-##############################################################################
-# SERVICE CONFIGURATION VARIABLES
-# These variables are documented here, but should be configured in
-# /etc/conf.d/foo for service foo and NOT enabled here unless you
-# really want them to work on a global basis.
-# If your service has characters in its name which are not legal in
-# shell variable names and you configure the variables for it in this
-# file, those characters should be replaced with underscores in the
-# variable names as shown below.
-
-# Some daemons are started and stopped via start-stop-daemon.
-# We can set some things on a per service basis, like the nicelevel.
-#SSD_NICELEVEL="-19"
-# Or the ionice level. The format is class[:data] , just like the
-# --ionice start-stop-daemon parameter.
-#SSD_IONICELEVEL="2:2"
-
-# Pass ulimit parameters
-# If you are using bash in POSIX mode for your shell, note that the
-# ulimit command uses a block size of 512 bytes for the -c and -f
-# options
-#rc_ulimit="-u 30"
-
-# It's possible to define extra dependencies for services like so
-#rc_config="/etc/foo"
-#rc_need="openvpn"
-#rc_use="net.eth0"
-#rc_after="clock"
-#rc_before="local"
-#rc_provide="!net"
-
-# You can also enable the above commands here for each service. Below is an
-# example for service foo.
-#rc_foo_config="/etc/foo"
-#rc_foo_need="openvpn"
-#rc_foo_after="clock"
-
-# Below is an example for service foo-bar. Note that the '-' is illegal
-# in a shell variable name, so we convert it to an underscore.
-# example for service foo-bar.
-#rc_foo_bar_config="/etc/foo-bar"
-#rc_foo_bar_need="openvpn"
-#rc_foo_bar_after="clock"
-
-# You can also remove dependencies.
-# This is mainly used for saying which services do NOT provide net.
-#rc_net_tap0_provide="!net"
-
-# This is the subsystem type.
-# It is used to match against keywords set by the keyword call in the
-# depend function of service scripts.
-#
-# It should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-# If it is commented out, automatic detection will be used.
-#
-# The list below shows all possible settings as well as the host
-# operating systems where they can be used and autodetected.
-#
-# ""               - nothing special
-# "docker"         - Docker container manager (Linux)
-# "jail"           - Jail (DragonflyBSD or FreeBSD)
-# "lxc"            - Linux Containers
-# "openvz"         - Linux OpenVZ
-# "prefix"         - Prefix
-# "rkt"            - CoreOS container management system (Linux)
-# "subhurd"        - Hurd subhurds (to be checked)
-# "systemd-nspawn" - Container created by systemd-nspawn (Linux)
-# "uml"            - Usermode Linux
-# "vserver"        - Linux vserver
-# "xen0"           - Xen0 Domain (Linux and NetBSD)
-# "xenU"           - XenU Domain (Linux and NetBSD)
-#rc_sys=""
-
-# on Linux and Hurd, this is the number of ttys allocated for logins
-# It is used in the consolefont, keymaps, numlock and termencoding
-# service scripts.
-rc_tty_number=12
-
-##############################################################################
-# LINUX CGROUPS RESOURCE MANAGEMENT
-
-# If you have cgroups turned on in your kernel, this switch controls
-# whether or not a group for each controller is mounted under
-# /sys/fs/cgroup.
-# None of the other options in this section work if this is set to "NO".
-#rc_controller_cgroups="YES"
-
-# The following settings allow you to set up values for the cgroup
-# controllers for your services.
-# They can be set in this file;, however, if you do this, the settings
-# will apply to all of your services.
-# If you want different settings for each service, place the settings in
-# /etc/conf.d/foo for service foo.
-# The format is to specify the names of the settings followed by their
-# values. Each variable can hold multiple settings.
-# For example, you would use this to set the cpu.shares setting in the
-# cpu controller to 512 for your service.
-# rc_cgroup_cpu="
-# cpu.shares 512
-# "
-#
-#For more information about the adjustments that can be made with
-#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
-
-# Set the blkio controller settings for this service.
-#rc_cgroup_blkio=""
-
-# Set the cpu controller settings for this service.
-#rc_cgroup_cpu=""
-
-# Add this service to the cpuacct controller (any value means yes).
-#rc_cgroup_cpuacct=""
-
-# Set the cpuset controller settings for this service.
-#rc_cgroup_cpuset=""
-
-# Set the devices controller settings for this service.
-#rc_cgroup_devices=""
-
-# Set the hugetlb controller settings for this service.
-#rc_cgroup_hugetlb=""
-
-# Set the memory controller settings for this service.
-#rc_cgroup_memory=""
-
-# Set the net_cls controller settings for this service.
-#rc_cgroup_net_cls=""
-
-# Set the net_prio controller settings for this service.
-#rc_cgroup_net_prio=""
-
-# Set the pids controller settings for this service.
-#rc_cgroup_pids=""
-
-# Set this to YES if you want all of the processes in a service's cgroup
-# killed when the service is stopped or restarted.
-# This should not be set globally because it kills all of the service's
-# child processes, and most of the time this is undesirable. Please set
-# it in /etc/conf.d/<service>.
-# To perform this cleanup manually for a stopped service, you can
-# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
-# rc-service <service> cgroup_cleanup.
-# rc_cgroup_cleanup="NO"

etc/rc.conf.DragonFly

@@ -0,0 +1,13 @@
+##############################################################################
+# DragonFly BSD SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on DragonFly BSD:
+# ""        - nothing special
+# "jail"    - DragonFly BSD jails
+# "prefix"  - Prefix
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+

etc/rc.conf.FreeBSD

@@ -0,0 +1,13 @@
+##############################################################################
+# FreeBSD SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on FreeBSD:
+# ""        - nothing special
+# "jail"    - FreeBSD jails
+# "prefix"  - Prefix
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+

etc/rc.conf.GNU-kFreeBSD

@@ -0,0 +1,11 @@
+##############################################################################
+# GNU/kFreeBSD SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on GNU/kFreeBSD:
+# ""        - nothing special
+# "jail"    - FreeBSD jails (not yet implemented)
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""

etc/rc.conf.Linux

@@ -0,0 +1,78 @@
+##############################################################################
+# LINUX SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on Linux:
+# ""        - nothing special
+# "lxc"     - Linux Containers
+# "openvz"  - Linux OpenVZ
+# "prefix"  - Prefix
+# "uml"     - Usermode Linux
+# "vserver" - Linux vserver
+# "xen0"    - Xen0 Domain
+# "xenU"    - XenU Domain
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+
+# This is the number of tty's used in most of the rc-scripts (like
+# consolefont, numlock, etc ...)
+rc_tty_number=12
+
+##############################################################################
+# CGROUPS RESOURCE MANAGEMENT
+
+# If you have cgroups turned on in your kernel, this switch controls
+# whether or not a group for each controller is mounted under
+# /sys/fs/cgroup.
+# None of the other options in this section work if this is set to "NO".
+#rc_controller_cgroups="YES"
+
+# The following settings allow you to set up values for the cgroup
+# controllers for your services.
+# They can be set in this file;, however, if you do this, the settings
+# will apply to all of your services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the names of the settings followed by their
+# values. Each variable can hold multiple settings.
+# For example, you would use this to set the cpu.shares setting in the
+# cpu controller to 512 for your service.
+# rc_cgroup_cpu="
+# cpu.shares 512
+# "
+#
+#For more information about the adjustments that can be made with
+#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
+
+# Set the blkio controller settings for this service.
+#rc_cgroup_blkio=""
+
+# Set the cpu controller settings for this service.
+#rc_cgroup_cpu=""
+
+# Add this service to the cpuacct controller (any value means yes).
+#rc_cgroup_cpuacct=""
+
+# Set the cpuset controller settings for this service.
+#rc_cgroup_cpuset=""
+
+# Set the devices controller settings for this service.
+#rc_cgroup_devices=""
+
+# Set the memory controller settings for this service.
+#rc_cgroup_memory=""
+
+# Set the net_prio controller settings for this service.
+#rc_cgroup_net_prio=""
+
+# Set this to YES if yu want all of the processes in a service's cgroup
+# killed when the service is stopped or restarted.
+# This should not be set globally because it kills all of the service's
+# child processes, and most of the time this is undesirable. Please set
+# it in /etc/conf.d/<service>.
+# To perform this cleanup manually for a stopped service, you can
+# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
+# rc-service <service> cgroup_cleanup.
+# rc_cgroup_cleanup="NO"

etc/rc.conf.NetBSD

@@ -0,0 +1,14 @@
+##############################################################################
+# NetBSD SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on NetBSD:
+# ""        - nothing special
+# "prefix"  - Prefix
+# "xen0"    - Xen0 Domain
+# "xenU"    - XenU Domain
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+

etc/rc.conf.in

@@ -0,0 +1,137 @@
+# Global OpenRC configuration settings
+
+# Set to "YES" if you want the rc system to try and start services
+# in parallel for a slight speed improvement. When running in parallel we
+# prefix the service output with its name as the output will get
+# jumbled up.
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
+#rc_parallel="NO"
+
+# Set rc_interactive to "YES" and you'll be able to press the I key during
+# boot so you can choose to start specific services. Set to "NO" to disable
+# this feature. This feature is automatically disabled if rc_parallel is
+# set to YES.
+#rc_interactive="YES"
+
+# If we need to drop to a shell, you can specify it here.
+# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
+# otherwise /bin/sh
+# Linux users could specify /sbin/sulogin
+#rc_shell=/bin/sh
+
+# Do we allow any started service in the runlevel to satisfy the dependency
+# or do we want all of them regardless of state? For example, if net.eth0
+# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
+# both will be started, but services that depend on 'net' will work if either
+# one comes up. With rc_depend_strict="YES" we would require them both to
+# come up.
+#rc_depend_strict="YES"
+
+# rc_hotplug is a list of services that we allow to be hotplugged.
+# By default we do not allow hotplugging.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# This service is intrinsically included in the boot runlevel.
+# To disable services, prefix with a !
+# Example - rc_hotplug="net.wlan !net.*"
+# This allows net.wlan and any service not matching net.* to be plugged.
+# Example - rc_hotplug="*"
+# This allows all services to be hotplugged
+#rc_hotplug="*"
+
+# rc_logger launches a logging daemon to log the entire rc process to
+# /var/log/rc.log
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+#rc_logger="YES"
+
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+#rc_log_path="/var/log/rc.log"
+
+# By default we filter the environment for our running scripts. To allow other
+# variables through, add them here. Use a * to allow all variables through.
+#rc_env_allow="VAR1 VAR2"
+
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+#rc_start_wait=100
+
+# rc_nostop is a list of services which will not stop when changing runlevels.
+# This still allows the service itself to be stopped when called directly.
+#rc_nostop=""
+
+# rc will attempt to start crashed services by default.
+# However, it will not stop them by default as that could bring down other
+# critical services.
+#rc_crashed_stop=NO
+#rc_crashed_start=YES
+
+##############################################################################
+# MISC CONFIGURATION VARIABLES
+# There variables are shared between many init scripts
+
+# Set unicode to YES to turn on unicode support for keyboards and screens.
+#unicode="NO"
+
+# This is how long fuser should wait for a remote server to respond. The
+# default is 60 seconds, but  it can be adjusted here.
+#rc_fuser_timeout=60
+
+# Below is the default list of network fstypes.
+#
+# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
+# nfs nfs4 ocfs2 shfs smbfs
+#
+# If you would like to add to this list, you can do so by adding your
+# own fstypes to the following variable.
+#extra_net_fs_list=""
+
+##############################################################################
+# SERVICE CONFIGURATION VARIABLES
+# These variables are documented here, but should be configured in
+# /etc/conf.d/foo for service foo and NOT enabled here unless you
+# really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
+
+# Some daemons are started and stopped via start-stop-daemon.
+# We can set some things on a per service basis, like the nicelevel.
+#SSD_NICELEVEL="-19"
+
+# Pass ulimit parameters
+#rc_ulimit="-u 30"
+
+# It's possible to define extra dependencies for services like so
+#rc_config="/etc/foo"
+#rc_need="openvpn"
+#rc_use="net.eth0"
+#rc_after="clock"
+#rc_before="local"
+#rc_provide="!net"
+
+# You can also enable the above commands here for each service. Below is an
+# example for service foo.
+#rc_foo_config="/etc/foo"
+#rc_foo_need="openvpn"
+#rc_foo_after="clock"
+
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
+# You can also remove dependencies.
+# This is mainly used for saying which servies do NOT provide net.
+#rc_net_tap0_provide="!net"
+

etc/rc.devd

@@ -1,13 +1,6 @@
 #!/bin/sh
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-#    except according to the terms contained in the LICENSE file.
 
 # Inform RC that we are in the background and hotplugged
 IN_BACKGROUND=yes

etc/rc.in

@@ -1,13 +1,6 @@
 #!@SHELL@
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-#    except according to the terms contained in the LICENSE file.
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)
@@ -17,9 +10,9 @@
 trap : SIGINT
 trap "echo 'Boot interrupted'; exit 1" SIGQUIT
 
-/sbin/openrc sysinit || exit 1
+/sbin/rc sysinit || exit 1
-/sbin/openrc boot || exit 1
+/sbin/rc boot || exit 1
-/sbin/openrc default
+/sbin/rc default
 
 # We don't actually care if rc default worked or not, we should exit 0
 # to allow logins

etc/rc.shutdown.in

@@ -1,24 +1,17 @@
 #!@SHELL@
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-#    except according to the terms contained in the LICENSE file.
 
 # Handle interrupts
 trap : SIGINT SIGQUIT
 
 # Try and use stuff in /lib over anywhere else so we can shutdown
 # local mounts correctly.
-LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LD_LIBRARY_PATH}" ; export LD_LIBRARY_PATH
+LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}" ; export LD_LIBRARY_PATH
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)
 [ -z "$TERM" -o "$TERM" = "dumb" ] && TERM="@TERM@" && export TERM
 
 action=${1:-shutdown}
-exec /sbin/openrc "${action}"
+exec /sbin/rc "${action}"

guide.md

@@ -1,269 +0,0 @@
-# Purpose and description
-
-OpenRC is an init system for Unixoid operating systems. It takes care of 
-startup and shutdown of the whole system, including services.
-
-It evolved out of the Gentoo "Baselayout" package which was a custom pure-shell 
-startup solution. (This was both hard to maintain and debug, and not very 
-performant)
-
-Most of the core parts are written in C99 for performance and flexibility 
-reasons, while everything else is posix sh.
-The License is 2-clause BSD
-
-Current size is about 10k LoC C, and about 4k LoC shell.
-
-OpenRC is known to work on Linux, many BSDs (FreeBSD, OpenBSD, DragonFlyBSD at 
-least) and HURD.
-
-Services are stateful (i.e. `start`; `start` will lead to "it's already started")
-
-# Startup
-
-Usually PID1 (aka. `init`) calls the OpenRC binary (`/sbin/openrc` by default).
-(The default setup assumes sysvinit for this)
-
-openrc scans the runlevels (default: `/etc/runlevels`) and builds a dependency
-graph, then starts the needed service scripts, either serialized (default) or in 
-parallel.
-
-When all the init scripts are started openrc terminates. There is no persistent 
-daemon. (Integration with tools like monit, runit or s6 can be done)
-
-# Shutdown
-
-On change to runlevel 0/6 or running `reboot`, `halt` etc., openrc stops all
-services that are started and runs the services in the `shutdown` runlevel.
-
-# Modifying Service Scripts
-
-Any service can, at any time, be started/stopped/restarted by executing 
-`rc-service someservice start`, `rc-service someservice stop`, etc.
-Another, less preferred method, is to run the service script directly,
-e.g. `/etc/init.d/service start`, `/etc/init.d/service stop`, etc.
-
-OpenRC will take care of dependencies, e.g starting apache will start network 
-first, and stopping network will stop apache first.
-
-There is a special command `zap` that makes OpenRC 'forget' that a service is
-started; this is mostly useful to reset a crashed service to stopped state 
-without invoking the (possibly broken) stop function of the service script.
-
-Calling `openrc` without any arguments will try to reset all services so
-that the current runlevel is satisfied; if you manually started apache it will be 
-stopped, and if squid died but is in the current runlevel it'll be restarted.
-
-There is a `service` helper that emulates the syntax seen on e.g. older Redhat
-and Ubuntu (`service nginx start` etc.)
-
-# Runlevels
-
-OpenRC has a concept of runlevels, similar to what sysvinit historically 
-offered. A runlevel is basically a collection of services that needs to be 
-started. Instead of random numbers they are named, and users can create their 
-own if needed. This allows, for example, to have a default runlevel with 
-"everything" enabled, and a "powersaving" runlevel where some services are 
-disabled.
-
-The `rc-status` helper will print all currently active runlevels and the state
-of init scripts in them:
-
-```
-# rc-status
- * Caching service dependencies ... [ ok ]
-Runlevel: default
- modules                     [  started  ]
- lvm                         [  started  ]
-```
-
-All runlevels are represented as folders in `/etc/runlevels/` with symlinks to 
-the actual init scripts.
-
-Calling openrc with an argument (`openrc default`) will switch to that
-runlevel; this will start and stop services as needed.
-
-Managing runlevels is usually done through the `rc-update` helper, but could of 
-course be done by hand if desired.
-e.g. `rc-update add nginx default` - add nginx to the default runlevel
-Note: This will not auto-start nginx! You'd still have to trigger `rc` or run 
-the initscript by hand.
-
-FIXME: Document stacked runlevels
-
-The default startup uses the runlevels `boot`, `sysinit` and `default`, in that 
-order. Shutdown uses the `shutdown` runlevel.
-
-
-# Syntax of Service Scripts
-
-Service scripts are shell scripts. OpenRC aims at using only the standardized 
-POSIX sh subset for portability reasons. The default interpreter (build-time 
-toggle) is `/bin/sh`, so using for example mksh is not a problem.
-
-OpenRC has been tested with busybox sh, ash, dash, bash, mksh, zsh and possibly 
-others. Using busybox sh has been difficult as it replaces commands with 
-builtins that don't offer the expected features.
-
-The interpreter for initscripts is `#!/sbin/openrc-run`.
-Not using this interpreter will break the use of dependencies and is not 
-supported. (iow: if you insist on using `#!/bin/sh` you're on your own)
-
-A `depend` function declares the dependencies of this service script.
-All scripts must have start/stop/status functions, but defaults are provided.
-Extra functions can be added easily:
-
-```
-extra_commands="checkconfig"
-checkconfig() {
-	doSomething
-}
-```
-
-This exports the checkconfig function so that `/etc/init.d/someservice 
-checkconfig` will be available, and it "just" runs this function.
-
-While commands defined in `extra_commands` are always available, commands
-defined in `extra_started_commands` will only work when the service is started
-and those defined in `extra_stopped_commands` will only work when the service is
-stopped. This can be used for implementing graceful reload and similar
-behaviour.
-
-Adding a restart function will not work, this is a design decision within 
-OpenRC. Since there may be dependencies involved (e.g. network -> apache) a 
-restart function is in general not going to work. 
-restart is internally mapped to `stop()` + `start()` (plus handling dependencies).
-If a service needs to behave differently when it is being restarted vs
-started or stopped, it should test the `$RC_CMD` variable, for example:
-
-```
-[ "$RC_CMD" = restart ] && do_something
-```
-
-# The Depend Function
-
-This function declares the dependencies for a service script. This
-determines the order the service scripts start.
-
-```
-depend() {
-	need net
-	use dns logger netmount
-	want coolservice
-}
-```
-
-`need` declares a hard dependency - net always needs to be started before this 
-	service does
-
-`use` is a soft dependency - if dns, logger or netmount is in this runlevel 
-	start it before, but we don't care if it's not in this runlevel.
-	`want` is between need and use - try to start coolservice if it is
-	installed on the system, regardless of whether it is in the
-	runlevel, but we don't care if it starts.
-
-`before` declares that we need to be started before another service
-
-`after` declares that we need to be started after another service, without 
-	creating a dependency (so on calling stop the two are independent)
-
-`provide` allows multiple implementations to provide one service type, e.g.:
-	`provide cron` is set in all cron-daemons, so any one of them started 
-	satisfies a cron dependency
-
-`keyword` allows platform-specific overrides, e.g. `keyword -lxc` makes this 
-	service script a noop in lxc containers. Useful for things like keymaps, 
-	module loading etc. that are either platform-specific or not available 
-	in containers/virtualization/...
-
-FIXME: Anything missing in this list?
-
-# The Default Functions
-
-All service scripts are assumed to have the following functions:
-
-```
-start()
-stop()
-status()
-```
-
-There are default implementations in `lib/rc/sh/openrc-run.sh` - this allows very 
-compact service scripts. These functions can be overridden per service script as 
-needed.
-
-The default functions assume the following variables to be set in the service 
-script:
-
-```
-command=
-command_args=
-pidfile=
-``
-
-Thus the 'smallest' service scripts can be half a dozen lines long
-
-# The Magic of `conf.d`
-
-Most service scripts need default values. It would be fragile to
-explicitly source some arbitrary files. By convention `openrc-run` will source
-the matching file in `/etc/conf.d/` for any script in `/etc/init.d/`
-
-This allows you to set random startup-related things easily. Example:
-
-```
-conf.d/foo:
-START_OPTS="--extraparameter sausage"
-
-init.d/foo:
-start() {
-	/usr/sbin/foo-daemon ${STARTOPTS}
-}
-```
-
-The big advantage of this split is that most of the time editing of the init 
-script can be avoided.
-
-# Start-Stop-Daemon
-
-OpenRC has its own modified version of s-s-d, which is historically related and 
-mostly syntax-compatible to Debian's s-s-d, but has been rewritten from scratch.
-
-It helps with starting daemons, backgrounding, creating PID files and many 
-other convenience functions related to managing daemons.
-
-# `/etc/rc.conf`
-
-This file manages the default configuration for OpenRC, and it has examples of 
-per-service-script variables.
-
-Among these are `rc_parallel` (for parallelized startup), `rc_log` (logs all boot 
-messages to a file), and a few others.
-
-# ulimit and CGroups
-
-Setting `ulimit` and `nice` values per service can be done through the `rc_ulimit`
-variable.
-
-Under Linux, OpenRC can optionally use CGroups for process management.
-By default each service script's processes are migrated to their own CGroup.
-
-By changing certain values in the `conf.d` file limits can be enforced per 
-service. It is easy to find orphan processes of a service that persist after 
-`stop()`, but by default these will NOT be terminated.
-To change this add `rc_cgroup_cleanup="yes"` in the `conf.d` files for services 
-where you desire this functionality.
-
-# Caching
-
-For performance reasons OpenRC keeps a cache of pre-parsed initscript metadata
-(e.g. `depend`). The default location for this is `/${RC_SVCDIR}/cache`.
-
-The cache uses `mtime` to check for file staleness. Should any service script
-change it'll re-source the relevant files and update the cache
-
-# Convenience functions
-
-OpenRC has wrappers for many common output tasks in libeinfo.
-This allows to print colour-coded status notices and other things.
-To make the output consistent the bundled initscripts all use ebegin/eend to 
-print nice messages.

init.d.misc/avahi-dnsconfd.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 command=@PKG_PREFIX@/sbin/avahi-dnsconfd
 command_args="$avahi_dnsconfd_args -D"

init.d.misc/avahid.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 command=@PKG_PREFIX@/sbin/avahi-daemon
 command_args="$avahid_args -D"

init.d.misc/dbus.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 command=@PKG_PREFIX@/bin/dbus-daemon
 pidfile=@VARBASE@/run/dbus/pid

init.d.misc/dhcpcd.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 command=/sbin/dhcpcd
 pidfile=/var/run/dhcpcd.pid

init.d.misc/dnsmasq.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 command=@PKG_PREFIX@/sbin/dnsmasq
 command_args=$dnsmasq_args

init.d.misc/hald.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 command=@PKG_PREFIX@/sbin/hald
 pidfile=@VARBASE@/run/hald/hald.pid

init.d.misc/named.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 command=/usr/sbin/named
 command_args=$named_args

init.d.misc/ntpd.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 : ${ntpd_config:=/etc/ntp.conf}
 : ${ntpd_drift:=/var/db/ntpd.drift}

init.d.misc/openvpn.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 vpn=${RC_SVCNAME#*.}
 name="OpenVPN"
@@ -60,7 +53,7 @@ start_pre()
 			eend $?
 		fi
 	else
-		if command -v kldload >/dev/null 2>&1; then
+		if type kldload >/dev/null 2>&1; then
 			# Hammer the modules home by default
 			sysctl -a | grep -q '\.tun\.' || kldload if_tun
 			sysctl -a | grep -q '\.tap\.' || kldload if_tap

init.d.misc/polkitd.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 command=@PKG_PREFIX@/sbin/polkitd
 pidfile=@VARBASE@/run/polkitd/polkitd.pid

init.d.misc/sshd.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 command=/usr/sbin/sshd
 command_args=$sshd_args

init.d.misc/wpa_supplicant.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 command=/usr/sbin/wpa_supplicant
 : ${wpa_supplicant_conf:=/etc/wpa_supplicant.conf}
@@ -39,11 +32,6 @@ find_wireless()
 			fi
 		done
 		;;
-	FreeBSD)
-		for iface in $(sysctl -b net.wlan.devices 2>/dev/null); do
-			echo "${iface##*/}"
-		done
-		;;
 	*)
 		for iface in /dev/net/* $(ifconfig -l 2>/dev/null); do
 			if ifconfig "${iface##*/}" 2>/dev/null | \

init.d/.gitignore

@@ -1,17 +1,17 @@
-binfmt
-modules-load
 bootmisc
 fsck
 hostname
 local
 localmount
-loopback
 moused
+net.lo
+net.lo0
 netmount
 network
 root
 savecache
 swap
+swapfiles
 sysctl
 urandom
 devfs
@@ -23,11 +23,8 @@ killprocs
 modules
 mount-ro
 mtab
-net-online
 numlock
-osclock
 procfs
-s6-svscan
 staticroute
 sysfs
 devdb
@@ -37,7 +34,6 @@ pf
 rarpd
 rc-enabled
 rpcbind
-runsvdir
 savecore
 swap-blk
 swclock
@@ -45,3 +41,4 @@ syslogd
 termencoding
 ttys
 wscons
+tmpfiles.setup

init.d/Makefile

@@ -2,8 +2,8 @@ include ../mk/net.mk
 
 DIR=	${INITDIR}
 SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in loopback.in \
-	netmount.in osclock.in root.in savecache.in swap.in swclock.in \
+	netmount.in root.in savecache.in swap.in swapfiles.in \
-	sysctl.in runsvdir.in urandom.in s6-svscan.in ${SRCS-${OS}}
+	tmpfiles.setup.in swclock.in sysctl.in urandom.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
 # Are we installing our network scripts?
@@ -15,15 +15,15 @@ MK=	../mk
 include ${MK}/os.mk
 
 # Generic BSD scripts
-SRCS-FreeBSD=	hostid.in modules.in moused.in newsyslog.in pf.in rarpd.in \
+SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-		rc-enabled.in rpcbind.in savecore.in syslogd.in
+		rpcbind.in savecore.in syslogd.in
 # These are FreeBSD specific
 SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in encswap.in ipfw.in \
-		modules.in modules-load.in mixer.in nscd.in powerd.in syscons.in
+		mixer.in nscd.in powerd.in syscons.in
 
-SRCS-Linux=	binfmt.in devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
+SRCS-Linux=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
-		killprocs.in modules.in modules-load.in mount-ro.in mtab.in numlock.in \
+		killprocs.in modules.in mount-ro.in mtab.in numlock.in \
-		procfs.in net-online.in sysfs.in termencoding.in
+		procfs.in sysfs.in termencoding.in tmpfiles.dev.in
 
 # Generic BSD scripts
 SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
@@ -31,6 +31,9 @@ SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
 # These are NetBSD specific
 SRCS-NetBSD+=	devdb.in swap-blk.in ttys.in wscons.in
 
+%.in: %${SFX}
+	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@
+
 include ${MK}/scripts.mk
 
 _installafter_: realinstall

init.d/adjkerntz.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 extra_commands="save"
 

init.d/binfmt.in

@@ -1,27 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Register misc binary format handlers"
-
-depend()
-{
-	after procfs
-	use modules devfs
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
-}
-
-start()
-{
-	ebegin "Loading custom binary format handlers"
-	"$RC_LIBEXECDIR"/sh/binfmt.sh
-	eend $?
-	return 0
-}

init.d/bootmisc.in

@@ -1,19 +1,12 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 depend()
 {
 	need localmount
 	before logger
-	after clock root sysctl
+	after clock sysctl
 	keyword -prefix -timeout
 }
 
@@ -75,7 +68,7 @@ cleanup_var_run_dir()
 	do
 		# Clean stale sockets
 		if [ -S "$x" ]; then
-			if command -v fuser >/dev/null 2>&1; then
+			if type fuser >/dev/null 2>&1; then
 				fuser "$x" >/dev/null 2>&1 || rm -- "$x"
 			else
 				rm -- "$x"
@@ -124,41 +117,19 @@ migrate_to_run()
 
 clean_run()
 {
-	[ "$RC_SYS" = VSERVER -o "$RC_SYS" = LXC ] && return 0
+	[ "$RC_SYS" = VSERVER ] && return 0
 	local dir
-	# If / is still read-only due to a problem, this will fail!
-	if ! checkpath -W /; then
-		ewarn "/ is not writable; unable to clean up underlying /run"
-		return 1
-	fi
-	if ! checkpath -W /tmp; then
-		ewarn "/tmp is not writable; unable to clean up underlying /run"
-		return 1
-	fi
-	# Now we know that we can modify /tmp and /
-	# if mktemp -d fails, it returns an EMPTY string
-	# STDERR: mktemp: failed to create directory via template ‘/tmp/tmp.XXXXXXXXXX’: Read-only file system
-	# STDOUT: ''
-	rc=0
 	dir=$(mktemp -d)
-	if [ -n "$dir" -a -d $dir -a -w $dir ]; then
+	mount --bind / $dir
-		mount --bind / $dir && rm -rf $dir/run/* || rc=1
+	rm -rf $dir/run/*
-		umount $dir && rmdir $dir
+	umount $dir
-	else
+	rm -rf $dir
-		rc=1
-	fi
-	if [ $rc -ne 0 ]; then
-		ewarn "Could not clean up underlying /run on /"
-		return 1
-	fi
 }
 
 start()
 {
 	# Remove any added console dirs
-	if checkpath -W "$RC_LIBEXECDIR"; then
+	rm -rf "$RC_LIBEXECDIR"/console/*
-		rm -rf "$RC_LIBEXECDIR"/console/*
-	fi
 
 	local logw=false runw=false extra=
 	# Ensure that our basic dirs exist
@@ -220,16 +191,10 @@ start()
 	if yesno $log_dmesg; then
 		if $logw || checkpath -W /var/log; then
 			# Create an 'after-boot' dmesg log
-			case "$RC_SYS" in
+			if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ -a "$RC_SYS" != LXC ]; then
-				VSERVER|OPENVZ|LXC|SYSTEMD-NSPAWN) ;;
+				dmesg > /var/log/dmesg
-				*)
+				chmod 640 /var/log/dmesg
-					if yesno ${previous_dmesg:-no}; then
+			fi
-						mv /var/log/dmesg /var/log/dmesg.old
-					fi
-					dmesg > /var/log/dmesg
-					chmod 640 /var/log/dmesg
-					;;
-			esac
 		fi
 	fi
 

init.d/consolefont.in

@@ -1,21 +1,14 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 description="Sets a font for the consoles."
 
 depend()
 {
 	need localmount termencoding
-	after hotplug bootmisc modules
+	after hotplug bootmisc
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 start()

init.d/devd.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 command=/sbin/devd
 command_args=$devd_args

init.d/devdb.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2008-2015 The OpenRC Authors.
+# Copyright (c) 2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 description="Creates the dev database"
 

init.d/devfs.in

@@ -1,93 +1,21 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
-description="Set up the /dev directory"
+description="Mount system critical filesystems in /dev."
 
-depend()
+depend() {
-{
+	use dev-mount
-	provide dev-mount
 	before dev
-	keyword -docker -lxc -prefix -systemd-nspawn -vserver
+	keyword -prefix -vserver -lxc
 }
 
-mount_dev()
+start() {
-{
+	# Mount required stuff as user may not have then in /etc/fstab
-	local action=--mount devfstype msg=Mounting
-	# Some devices require exec, Bug #92921
-	local mountopts="exec,nosuid,mode=0755"
-	if yesno ${skip_mount_dev:-no} ; then
-		einfo "/dev will not be mounted due to user request"
-		return 0
-	fi
-	if mountinfo -q /dev; then
-		action=--remount
-		mountopts="remount,$mountopts"
-		msg=Remounting
-	fi
-	if fstabinfo -q /dev; then
-		ebegin "$msg /dev according to @SYSCONFDIR@/fstab"
-		fstabinfo -q $action /dev
-		eend $?
-		return 0
-	fi
-	if grep -q devtmpfs /proc/filesystems; then
-		devfstype=devtmpfs
-		mountopts="$mountopts,size=10M"
-	elif grep -q tmpfs /proc/filesystems; then
-		devfstype=tmpfs
-		mountopts="$mountopts,size=10M"
-	fi
-	if [ -n "$devfstype" ]; then
-		ebegin "$msg $devfstype on /dev"
-		mount -n -t $devfstype -o $mountopts dev /dev
-		eend $?
-	else
-		ewarn "This kernel does not have devtmpfs or tmpfs support, and there"
-		ewarn "is no entry for /dev in fstab."
-		ewarn "This means /dev will not be mounted."
-		ewarn "To avoid this message, set CONFIG_DEVTMPFS or CONFIG_TMPFS to y"
-		ewarn "in your kernel configuration or see @SYSCONFDIR@/conf.d/devfs"
-	fi
-	return 0
-}
-
-seed_dev()
-{
-	# Seed /dev with some things that we know we need
-
-	# creating /dev/console, /dev/tty and /dev/tty1 to be able to write
-	# to $CONSOLE with/without bootsplash before udevd creates it
-	[ -c /dev/console ] || mknod -m 600 /dev/console c 5 1
-	[ -c /dev/tty1 ] || mknod -m 620 /dev/tty1 c 4 1
-	[ -c /dev/tty ] || mknod -m 666 /dev/tty c 5 0
-
-	# udevd will dup its stdin/stdout/stderr to /dev/null
-	# and we do not want a file which gets buffered in ram
-	[ -c /dev/null ] || mknod -m 666 /dev/null c 1 3
-
-	# so udev can add its start-message to dmesg
-	[ -c /dev/kmsg ] || mknod -m 660 /dev/kmsg c 1 11
-
-	# extra symbolic links not provided by default
-	[ -e /dev/fd ] || ln -snf /proc/self/fd /dev/fd
-	[ -e /dev/stdin ] || ln -snf /proc/self/fd/0 /dev/stdin
-	[ -e /dev/stdout ] || ln -snf /proc/self/fd/1 /dev/stdout
-	[ -e /dev/stderr ] || ln -snf /proc/self/fd/2 /dev/stderr
-	[ -e /proc/kcore ] && ln -snf /proc/kcore /dev/core
-
-	# Mount required directories as user may not have them in /etc/fstab
 	for x in \
 		"mqueue /dev/mqueue 1777 ,nodev mqueue" \
 		"devpts /dev/pts 0755 ,gid=5,mode=0620 devpts" \
-		"tmpfs /dev/shm 1777 ,nodev,mode=1777 shm" \
+		"tmpfs /dev/shm 1777 ,nodev shm" \
 	; do
 		set -- $x
 		grep -Eq "[[:space:]]+$1$" /proc/filesystems || continue
@@ -106,23 +34,5 @@ seed_dev()
 			eend $?
 		fi
 	done
-}
-
-restorecon_dev()
-{
-	if [ -x /sbin/restorecon ]; then
-		ebegin "Restoring SELinux contexts in /dev"
-		restorecon -rF /dev >/dev/null 2>&1
-		eend $?
-	fi
-
-	return 0
-}
-
-start()
-{
-	mount_dev
-	seed_dev
-	restorecon_dev
 	return 0
 }

init.d/dmesg.in

@@ -1,20 +1,13 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 description="Set the dmesg level for a cleaner boot"
 
 depend()
 {
 	before dev modules
-	keyword -docker -lxc -prefix -systemd-nspawn -vserver
+	keyword -lxc -prefix -vserver
 }
 
 start()

init.d/dumpon.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 description="Configures a specific kernel dump device."
 

init.d/encswap.in

@@ -1,4 +1,4 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
 # Copyright 1992-2012 FreeBSD Project
 # Released under the 2-clause BSD license
 

init.d/fsck.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 description="Check and repair filesystems according to /etc/fstab"
 _IFS="
@@ -16,11 +9,11 @@ _IFS="
 depend()
 {
 	use dev clock modules
-	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -timeout -vserver -uml
+	keyword -jail -openvz -prefix -timeout -vserver -lxc -uml
 }
 
 _abort() {
-	yesno ${fsck_abort_on_errors:-yes} && rc-abort
+	rc-abort
 	return 1
 }
 

init.d/hostid.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 extra_commands="reset"
 : ${hostid_file:=/etc/hostid}
@@ -47,7 +40,7 @@ reset()
 {
 	local uuid= x="[0-9a-f]" y="$x$x$x$x"
 
-	if command -v kenv >/dev/null 2>&1; then
+	if type kenv >/dev/null 2>&1; then
 		uuid=$(kenv smbios.system.uuid 2>/dev/null)
 	fi
 	case "$uuid" in

init.d/hostname.in

@@ -1,36 +1,19 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 description="Sets the hostname of the machine."
 
 depend() {
-	keyword -docker -lxc -prefix -systemd-nspawn
+	keyword -prefix -lxc
 }
 
 start()
 {
-	local h source x
+	# HOSTNAME variable used to be defined in caps in conf.d/hostname.
-	if [ -s @SYSCONFDIR@/hostname ] && [ -r @SYSCONFDIR@/hostname ]; then
+	# It is also a magic variable in bash.
-	read h x <@SYSCONFDIR@/hostname
+	hostname=${hostname-${HOSTNAME-localhost}} # checkbashisms: false positive
-	source=" from @SYSCONFDIR@/hostname"
+	ebegin "Setting hostname to $hostname"
-	else
+	hostname "$hostname"
-		# HOSTNAME variable used to be defined in caps in conf.d/hostname.
-		# It is also a magic variable in bash.
-		h=${hostname-${HOSTNAME}} # checkbashisms: false positive
-	fi
-	if [ -z "$h" ]; then
-		einfo "Using default system hostname"
-		return 0
-	fi
-	ebegin "Setting hostname to $h $source"
-	hostname "$h"
 	eend $? "Failed to set the hostname"
 }

init.d/hwclock.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 extra_commands="save show"
 
@@ -30,13 +23,12 @@ fi
 depend()
 {
 	provide clock
-	want modules
 	if yesno $clock_adjfile; then
 		use root
 	else
 		before *
 	fi
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 setupopts()
@@ -70,28 +62,9 @@ _hwclock()
 	return 1
 }
 
-get_noadjfile()
-{
-	if ! yesno $clock_adjfile; then
-		# Some implementations don't handle adjustments
-		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
-			echo --noadjfile
-		fi
-	fi
-}
-
-rtc_exists()
-{
-	local rtc=
-	for rtc in /dev/rtc /dev/rtc[0-9]*; do
-		[ -e "$rtc" ] && break
-	done
-	[ -e "$rtc" ]
-}
-
 start()
 {
-	local retval=0 errstr="" modname
+	local retval=0 errstr=""
 	setupopts
 
 	if [ -z "$utc_cmd" ]; then
@@ -101,27 +74,31 @@ start()
 
 	ebegin "Setting system clock using the hardware clock [$utc]"
 	if [ -e /proc/modules ]; then
-		if ! rtc_exists; then
+		local rtc=
-			for x in rtc-cmos rtc genrtc; do
+		for rtc in /dev/rtc /dev/rtc[0-9]*; do
-				modprobe -q $x && rtc_exists && modname="$x" && break
+			[ -e "$rtc" ] && break
-			done
+		done
-			[ -n "$modname" ] &&
+		if [ ! -e "${rtc}" ]; then
-				ewarn "The $modname module needs to be configured in" \
+			modprobe -q rtc-cmos || modprobe -q rtc || modprobe -q genrtc
-					"@SYSCONFDIR@/conf.d/modules or built in."
 		fi
 	fi
 
-	# Always set the kernel's time zone.
-	_hwclock --systz $utc_cmd $(get_noadjfile) $clock_args
-	: $(( retval += $? ))
-
 	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
-		_hwclock --adjust $utc_cmd $(get_noadjfile)
+		_hwclock --adjust $utc_cmd
 		: $(( retval += $? ))
 	fi
 
-	if yesno ${clock_hctosys:-YES}; then
+	# If setting UTC, don't bother to run hwclock when first booting
-		_hwclock --hctosys $utc_cmd $(get_noadjfile) $clock_args
+	# as that's the default
+	if [ "$PREVLEVEL" != N -o \
+		"$utc_cmd" != --utc -o \
+		-n "$clock_args" ];
+	then
+		if yesno ${clock_hctosys:-YES}; then
+			_hwclock --hctosys $utc_cmd $clock_args
+		else
+			_hwclock --systz $utc_cmd $clock_args
+		fi
 		: $(( retval += $? ))
 	fi
 
@@ -143,7 +120,14 @@ stop()
 
 	ebegin "Setting hardware clock using the system clock" "[$utc]"
 
-	_hwclock --systohc $utc_cmd $(get_noadjfile) $clock_args
+	if ! yesno $clock_adjfile; then
+		# Some implementations don't handle adjustments
+		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
+			utc_cmd="$utc_cmd --noadjfile"
+		fi
+	fi
+
+	_hwclock --systohc $utc_cmd $clock_args
 	retval=$?
 
 	eend $retval "Failed to sync clocks"
@@ -158,5 +142,5 @@ save()
 show()
 {
 	setupopts
-	hwclock --show "$utc_cmd" $(get_noadjfile) $clock_args
+	hwclock --show "$utc_cmd" $clock_args
 }

init.d/ipfw.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 # This is based on /etc/rc.firewall and /etc/rc.firewall6 from FreeBSD
 

init.d/keymaps.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 description="Applies a keymap for the consoles."
 
@@ -15,7 +8,7 @@ depend()
 {
 	need localmount termencoding
 	after bootmisc
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	keyword -openvz -prefix -uml -vserver -xenu -lxc
 }
 
 start()

init.d/killprocs.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 description="Kill all processes so we can unmount disks cleanly."
 
@@ -20,8 +13,10 @@ start()
 {
 	ebegin "Terminating remaining processes"
 	killall5 -15 ${killall5_opts}
+	sleep 1
 	eend 0
 	ebegin "Killing remaining processes"
 	killall5 -9 ${killall5_opts}
+	sleep 1
 	eend 0
 }

init.d/local.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 description="Executes user programs in @SYSCONFDIR@/local.d"
 
@@ -19,75 +12,40 @@ depend()
 
 start()
 {
-	ebegin "Starting local"
+	einfo "Starting local"
 
-	local file has_errors=0 redirect retval
+	local file
-	yesno $rc_verbose || redirect='> /dev/null 2>&1'
+	for file in @SYSCONFDIR@/local.d/*.start ; do
-	eindent
+		[ -x "$file" ] && "$file"
-	for file in @SYSCONFDIR@/local.d/*.start; do
-		if [ -x "${file}" ]; then
-			vebegin "Executing \"${file}\""
-			eval "${file}" $redirect
-			retval=$?
-			if [ ${retval} -ne 0 ]; then
-				has_errors=1
-			fi
-			veend ${retval} "Execution of \"${file}\" failed."
-		fi
 	done
-	eoutdent
 
-	if command -v local_start >/dev/null 2>&1; then
+	if type local_start >/dev/null 2>&1; then
-		ewarn "\"@SYSCONFDIR@/conf.d/local\" should be removed."
+		ewarn "@SYSCONFDIR@/conf.d/local should be removed."
 		ewarn "Please move the code from the local_start function"
-		ewarn "to executable scripts with an .start extension"
+		ewarn "to scripts with an .start extension"
-		ewarn "in \"@SYSCONFDIR@/local.d\""
+		ewarn "in @SYSCONFDIR@/local.d"
 		local_start
 	fi
 
-	eend ${has_errors}
+	eend 0
-
-	# We have to end with a zero exit code, because a failed execution
-	# of an executable @SYSCONFDIR@/local.d/*.start file shouldn't result in
-	# marking the local service as failed. Otherwise we are unable to
-	# execute any executable @SYSCONFDIR@/local.d/*.stop file, because a failed
-	# marked service cannot be stopped (and the stop function would
-	# actually call the executable @SYSCONFDIR@/local.d/*.stop file(s)).
-	return 0
 }
 
 stop()
 {
-	ebegin "Stopping local"
+	einfo "Stopping local"
 
-	local file has_errors=0 redirect retval
+	local file
-	yesno $rc_verbose || redirect='> /dev/null 2>&1'
-	eindent
 	for file in @SYSCONFDIR@/local.d/*.stop; do
-		if [ -x "${file}" ]; then
+		[ -x "$file" ] && "$file"
-			vebegin "Executing \"${file}\""
-			eval "${file}" $redirect
-			retval=$?
-			if [ ${retval} -ne 0 ]; then
-				has_errors=1
-			fi
-			veend ${retval} "Execution of \"${file}\" failed."
-		fi
 	done
-	eoutdent
 
-	if command -v local_stop >/dev/null 2>&1; then
+	if type local_start >/dev/null 2>&1; then
-		ewarn "\"@SYSCONFDIR@/conf.d/local\" should be removed."
+		ewarn "@SYSCONFDIR@/conf.d/local should be removed."
 		ewarn "Please move the code from the local_stop function"
-		ewarn "to executable scripts with an .stop extension"
+		ewarn "to scripts with an .stop extension"
-		ewarn "in \"@SYSCONFDIR@/local.d\""
+		ewarn "in @SYSCONFDIR@/local.d"
 		local_stop
 	fi
 
-	eend ${has_errors}
+	eend 0
-
-	# An executable @SYSCONFDIR@/local.d/*.stop file which failed with a
-	# non-zero exit status is not a reason to mark this service
-	# as failed, therefore we have to end with a zero exit code.
-	return 0
 }

init.d/localmount.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 description="Mounts disks and swap according to /etc/fstab."
 
@@ -16,16 +9,15 @@ depend()
 	need fsck
 	use lvm modules mtab
 	after lvm modules
-	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
+	keyword -jail -prefix -vserver -lxc
 }
 
 start()
 {
 	# Mount local filesystems in /etc/fstab.
-	# The types variable must start with no, and must be a type
+	local types="noproc" x= no_netdev=
-	local critical= types="noproc" x= no_netdev= rc=
 	for x in $net_fs_list $extra_net_fs_list; do
-		types="${types},${x}"
+		types="${types},no${x}"
 	done
 
 	if [ "$RC_UNAME" = Linux ]; then
@@ -37,20 +29,9 @@ start()
 	ebegin "Mounting local filesystems"
 	mount -at "$types" $no_netdev
 	eend $? "Some local filesystem failed to mount"
-	rc=$?
+
-	if [ -z "$critical_mounts" ]; then
+	# Always return 0 - some local mounts may not be critical for boot
-		rc=0
+	return 0
-	else
-		for x in ${critical_mounts}; do
-		fstabinfo -q $x || continue
-		if ! mountinfo -q $x; then
-			critical=x
-			eerror "Failed to mount $x"
-		fi
-		done
-		[ -z "$critical" ] && rc=0
-	fi
-	return $rc
 }
 
 stop()
@@ -78,37 +59,10 @@ stop()
 	no_umounts_r="^($no_umounts_r)$"
 
 	# Flush all pending disk writes now
-	sync
+	sync; sync
 
 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 
-	if [ "$RC_UNAME" = Linux ] && [ -d /sys/fs/aufs ] ; then
-		#if / is aufs we remount it noxino during shutdown
-		if mountinfo -q -f '^aufs$' / ; then
-			mount -o remount,noxino,rw /
-			sync
-		fi
-
-		local aufs_branch aufs_mount_point aufs_si_id aufs_br_id branches
-		for aufs_si_dir in /sys/fs/aufs/si*; do
-			[ -d "${aufs_si_dir}" ] || continue
-			aufs_si_id="si=${aufs_si_dir#/sys/fs/aufs/si_}"
-			aufs_mount_point="$(mountinfo -o ${aufs_si_id})"
-			branches="$aufs_si_dir/br[0-9] $aufs_si_dir/br[0-9][0-9] $aufs_si_dir/br[0-9][0-9][0-9]"
-			for x in $branches; do
-				[ -e "${x}" ] || continue
-				aufs_branch=$(sed 's/=.*//g' $x)
-				eindent
-				if ! mount -o "remount,del:$aufs_branch" "$aufs_mount_point" > /dev/null 2>&1; then
-					ewarn "Failed to remove branch $aufs_branch from aufs" \
-					"$aufs_mount_point"
-				fi
-				eoutdent
-				sync
-			done
-		done
-	fi
-
 	# Umount loop devices
 	einfo "Unmounting loop devices"
 	eindent

init.d/loopback.in

@@ -1,34 +1,35 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2013-2015 The OpenRC Authors.
+# Copyright (c) 2013 William Hubbs <w.d.hubbs@gmail.com>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 description="Configures the loopback interface."
 
 depend()
 {
-	keyword -jail -prefix -systemd-nspawn -vserver
+	keyword -jail -prefix -vserver
 }
 
 start()
 {
 	if [ "$RC_UNAME" = Linux ]; then
 		ebegin "Bringing up network interface lo"
-		if command -v ip > /dev/null 2>&1; then
+		if type ip > /dev/null 2>&1; then
-			ip addr add 127.0.0.1/8 dev lo brd +
+			ip addr add 127.0.0.1/8 dev lo brd + scope host
+			ip route add 127.0.0.0/8 dev lo scope host
 			ip link set lo up
 		else
 			ifconfig lo 127.0.0.1 netmask 255.0.0.0
+			route add -net 127.0.0.0 netmask 255.0.0.0 gw 127.0.0.1
 		fi
 	else
 		ebegin "Bringing up network interface lo0"
 		ifconfig lo0 127.0.0.1 netmask 255.0.0.0
+		route -q add -inet 127.0.0.0 -netmask 255.0.0.0 127.0.0.1
 	fi
 	eend $?
 }
+
+stop()
+{
+	return 0
+}

init.d/mixer.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 extra_commands="restore"
 

init.d/modules-load.in

@@ -1,72 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2016 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Loads a list of modules from systemd-compatible locations."
-
-depend()
-{
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
-}
-
-find_modfiles()
-{
-	local dirs="/usr/lib/modules-load.d /run/modules-load.d /etc/modules-load.d"
-	local basenames files fn x y
-	for x in $dirs; do
-		[ ! -d $x ] && continue
-		for y in $x/*.conf; do
-			[ -f $y ] && basenames="${basenames}\n${y##*/}"
-		done
-	done
-	basenames=$(printf "$basenames" | sort -u)
-	for x in $basenames; do
-		for y in $dirs; do
-			[ -r $y/$x ] &&
-				fn=$y/$x
-		done
-		files="$files $fn"
-	done
-	echo $files
-}
-
-load_modules()
-{
-	local file m modules rc x
-	file=$1
-	[ -z "$file" ] && return 0
-	while read m x; do
-		case $m in
-			\;*) continue ;;
-			\#*) continue ;;
-			*) modules="$modules $m"
-			;;
-		esac
-	done < $file
-	for x in $modules; do
-		ebegin "Loading module $x"
-		case "$RC_UNAME" in
-			FreeBSD) kldload "$x"; rc=$? ;;
-			Linux) modprobe --use-blacklist -q "$x"; rc=$? ;;
-			*) ;;
-		esac
-		eend $rc "Failed to load $x"
-	done
-}
-
-start()
-{
-	local x
-	files=$(find_modfiles)
-	for x in $files; do
-		load_modules $x
-	done
-	return 0
-}

init.d/modules.in

@@ -1,37 +1,18 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 description="Loads a user defined list of kernel modules."
 
 depend()
 {
 	use isapnp
-	want modules-load
+	keyword -openvz -prefix -vserver -lxc
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
 }
 
-FreeBSD_modules()
+start()
 {
-	local cnt=0 x
+	# Should not fail if kernel do not have module
-	for x in $modules; do
-		ebegin "Loading module $x"
-		kldload "$x"
-		eend $? "Failed to load $x" && : $(( cnt += 1 ))
-	done
-	einfo "Autoloaded $cnt module(s)"
-}
-
-Linux_modules()
-{
-	# Should not fail if kernel does not have module
 	# support compiled in ...
 	[ ! -f /proc/modules ] && return 0
 
@@ -48,21 +29,22 @@ Linux_modules()
 		x=${x%.*}
 	done
 
-	local list= x= xx= y= args= mpargs= a=
+	local list= x= xx= y= args= mpargs= cnt=0 a=
 	for x in $kv_variant_list ; do
 		eval list=\$modules_$(shell_var "$x")
 		[ -n "$list" ] && break
 	done
 	[ -z "$list" ] && list=$modules
 
-	[ -n "$list" ] && ebegin "Loading kernel modules"
 	for x in $list; do
 		a=${x#*:}
 		if [ "$a" = "$x" ]; then
 			unset mpargs
+			ebegin "Loading module $x"
 		else
 			x=${x%%:*}
 			mpargs="-o $a"
+			ebegin "Loading module $x as $a"
 		fi
 		aa=$(shell_var "$a")
 		xx=$(shell_var "$x")
@@ -74,16 +56,8 @@ Linux_modules()
 		done
 		[ -z "$args" ] && eval args=\$module_${aa}_args
 		[ -z "$args" ] && eval args=\$module_${xx}_args
-		eval modprobe --use-blacklist --verbose "$mpargs" "$x" "$args"
+		eval modprobe -q "$mpargs" "$x" "$args"
+		eend $? "Failed to load $x" && : $(( cnt += 1 ))
 	done
-	[ -n "$list" ] && eend
+	einfo "Autoloaded $cnt module(s)"
-}
-
-start()
-{
-	case "$RC_UNAME" in
-		FreeBSD|Linux) ${RC_UNAME}_modules ;;
-		*) ;;
-	esac
-	return 0
 }

init.d/mount-ro.in

@@ -1,20 +1,13 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 description="Re-mount filesytems read-only for a clean reboot."
 
 depend()
 {
 	need killprocs savecache
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
+	keyword -openvz -prefix -vserver -lxc
 }
 
 start()
@@ -22,7 +15,7 @@ start()
 	local ret=0
 
 	# Flush all pending disk writes now
-	sync
+	sync; sync
 
 	ebegin "Remounting remaining filesystems read-only"
 	# We need the do_unmount function
@@ -34,9 +27,6 @@ start()
 
 	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|/run|${rc_svcdir}" x= fs=
 	m="$m|/bin|/sbin|/lib(32|64)?|/libexec"
-	if [ -e "$rc_svcdir"/usr_premounted ]; then
-		m="$m|/usr"
-	fi
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
 	local IFS="$IFS:"
 	for x in $no_umounts $RC_NO_UMOUNTS; do

init.d/moused.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 mouse=${RC_SVCNAME##*.}
 if [ -n "$mouse" -a "$mouse" != "moused" ]; then

init.d/mtab.in

@@ -1,46 +1,36 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 description="Update /etc/mtab to match what the kernel knows about"
 
 depend()
 {
 	need root
-	keyword -prefix -systemd-nspawn
+	keyword -prefix
 }
 
 start()
 {
-	local rc=0
+	if [ -L /etc/mtab ]
-	ebegin "Updating /etc/mtab"
+	then
-	if ! checkpath -W /etc; then
+		einfo "Skipping mtab update (mtab is a symbolic link)"
-		rc=1
+		return 0
-	elif ! yesno ${mtab_is_file:-no}; then
-		[ ! -L /etc/mtab ] && [ -f /etc/mtab ] &&
-			ewarn "Removing /etc/mtab file"
-		einfo "Creating mtab symbolic link"
-		ln -snf /proc/self/mounts /etc/mtab
-	else
-		[ -L /etc/mtab ] && ewarn "Removing /etc/mtab symbolic link"
-		rm -f /etc/mtab
-		einfo "Creating mtab file"
-		# With / as tmpfs we cannot umount -at tmpfs in localmount as that
-		# makes / readonly and dismounts all tmpfs even if in use which is
-		# not good. Luckily, umount uses /etc/mtab instead of /proc/mounts
-		# which allows this hack to work.
-		grep -v "^[! ]* / tmpfs " /proc/mounts > /etc/mtab
-
-		# Remove stale backups
-		rm -f /etc/mtab~ /etc/mtab~~
 	fi
-	eend $rc "/etc is not writable; unable to create /etc/mtab"
+
-	return 0
+	ebegin "Updating /etc/mtab"
+	if ! echo 2>/dev/null >/etc/mtab; then
+		ewend 1 "/etc/mtab is not updateable"
+		return 0
+	fi
+
+	# With / as tmpfs we cannot umount -at tmpfs in localmount as that
+	# makes / readonly and dismounts all tmpfs even if in use which is
+	# not good. Luckily, umount uses /etc/mtab instead of /proc/mounts
+	# which allows this hack to work.
+	grep -v "^[! ]* / tmpfs " /proc/mounts > /etc/mtab
+
+	# Remove stale backups
+	rm -f /etc/mtab~ /etc/mtab~~
+	eend 0
 }

init.d/net-online.in

@@ -1,76 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Delays until the network is online or a specific timeout"
-
-depend()
-{
-	after modules
-	need sysfs
-	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -uml -vserver
-}
-
-get_interfaces()
-{
-	local ifname iftype
-	for ifname in /sys/class/net/*; do
-		read iftype < ${ifname}/type
-		[ "$iftype" = "1" ] && printf "%s " ${ifname##*/}
-	done
-}
-
-get_default_gateway()
-{
-	local cmd gateway
-	if command -v ip > /dev/null 2>&1; then
-		cmd="ip route show"
-	else
-		cmd=route
-	fi
-	set -- $($cmd | grep default)
-	[ "$2" != via ] && gateway="$2" || gateway="$3"
-	printf "%s" $gateway
-}
-
-start ()
-{
-	local carriers configured dev gateway ifcount infinite
-	local rc state x
-
-	ebegin "Checking to see if the network is online"
-	rc=0
-	interfaces=${interfaces:-$(get_interfaces)}
-	timeout=${timeout:-120}
- [ $timeout -eq 0 ] && infinite=true || infinite=false
- while $infinite || [ $timeout -gt 0 ]; do
-	carriers=0
-	configured=0
-	ifcount=0
- 	for dev in ${interfaces}; do
-		: $((ifcount += 1))
-		read x < /sys/class/net/$dev/carrier
-		[ $x -eq 1 ] && : $((carriers += 1))
-		read x < /sys/class/net/$dev/operstate
-		[ "$x" = up ] && : $((configured += 1))
-	done
-	[ $configured -eq $ifcount ] && [ $carriers -ge 1 ] && break
-	sleep 1
-	: $((timeout -= 1))
- done
- ! $infinite && [ $timeout -eq 0 ] && rc=1
- if [ $rc -eq 0 ] && yesno ${ping_default_gateway:-no}; then
- 	gateway="$(get_default_gateway)"
- 	if [ -n "$gateway" ] && ! ping -c 1 $gateway > /dev/null 2>&1; then
-		rc=1
-	fi
- fi
- eend $rc "The network is offline"
-}

init.d/netmount.in

@@ -1,60 +1,41 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
-description="Mounts network shares according to /etc/fstab."
+description="Mounts network shares, other than NFS, according to /etc/fstab."
+# We skip all NFS shares in this script because they require extra
+# daemons to be running on the client in order to work correctly.
+# It is best to allow nfs-utils to handle all nfs shares.
 
 depend()
 {
-	local opts mywant=""
+	config /etc/fstab
-	for opts in $(fstabinfo -o -t nfs,nfs4); do
+	use afc-client amd autofs openvpn
-		case $opts in
-			noauto) ;;
-			*) mywant="$mywant nfsclient"; break ;;
-		esac
-	done
- 	config /etc/fstab
-	want $mywant
-	use afc-client amd openvpn
 	use dns
-	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
+	keyword -jail -prefix -vserver -lxc
 }
 
 start()
 {
 	local x= fs= rc=
 	for x in $net_fs_list $extra_net_fs_list; do
+		case "$x" in
+			nfs|nfs4)
+			continue
+			;;
+		esac
 		fs="$fs${fs:+,}$x"
 	done
 
 	ebegin "Mounting network filesystems"
 	mount -at $fs
 	rc=$?
-	if [ "$RC_UNAME" = Linux ] && [ $rc = 0 ]; then
+	if [ "$RC_UNAME" = Linux ]; then
 		mount -a -O _netdev
 		rc=$?
 	fi
 	ewend $rc "Could not mount all network filesystems"
-	if [ -z "$critical_mounts" ]; then
+	return 0
-		rc=0
-	else
-		for x in ${critical_mounts}; do
-		fstabinfo -q $x || continue
-		if ! mountinfo -q $x; then
-			critical=x
-			eerror "Failed to mount $x"
-		fi
-		done
-		[ -z "$critical" ] && rc=0
-	fi
-	return $rc
 }
 
 stop()
@@ -65,7 +46,14 @@ stop()
 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 
 	for x in $net_fs_list $extra_net_fs_list; do
-		fs="$fs${fs:+,}$x"
+		case "$x" in
+			nfs|nfs4)
+				continue
+				;;
+			*)
+				fs="$fs${fs:+,}$x"
+				;;
+		esac
 	done
 	if [ -n "$fs" ]; then
 		umount -at $fs || eerror "Failed to simply unmount filesystems"
@@ -74,14 +62,21 @@ stop()
 	eindent
 	fs=
 	for x in $net_fs_list $extra_net_fs_list; do
-		fs="$fs${fs:+|}$x"
+		case "$x" in
+			nfs|nfs4)
+				continue
+				;;
+			*)
+				fs="$fs${fs:+|}$x"
+				;;
+		esac
 	done
 	[ -n "$fs" ] && fs="^($fs)$"
 	do_unmount umount ${fs:+--fstype-regex} $fs --netdev
 	retval=$?
 
 	eoutdent
-	if [ "$RC_UNAME" = Linux ] && [ $retval = 0 ]; then
+	if [ "$RC_UNAME" = Linux ]; then
 		umount -a -O _netdev
 		retval=$?
 	fi

init.d/network.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2009-2015 The OpenRC Authors.
+# Copyright (c) 2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 # This script was inspired by the equivalent rc.d network from NetBSD.
 
@@ -53,11 +46,7 @@ sys_interfaces()
 		local w= rest= i= cmd=$1
 		while read w rest; do
 			i=${w%%:*}
-			case "$i" in
+			[ "$i" != "$w" ] || continue
-				"$w") continue ;;
-				lo|lo0) continue ;;
-				*) ;;
-			esac
 			if [ "$cmd" = u ]; then
 				ifconfig "$i" | grep -q "[ ]*UP" || continue
 			fi

init.d/newsyslog.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 required_files="/etc/newsyslog.conf"
 

init.d/nscd.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 command=/usr/sbin/nscd
 command_args=$nscd_args

init.d/numlock.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 description="Turns numlock on for the consoles."
 
@@ -16,7 +9,7 @@ ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 depend()
 {
 	need localmount
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
+	keyword -openvz -prefix -vserver -lxc
 }
 
 _setleds()

init.d/osclock.in

@@ -1,19 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2014-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-# Can be used on OSs that take care of the clock.
-
-description="Provides clock"
-
-depend()
-{
-	provide clock
-}

init.d/pf.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 name="Packet Filter"
 : ${pf_conf:=${pf_rules:-/etc/pf.conf}}
@@ -24,7 +17,7 @@ depend() {
 start()
 {
 	ebegin "Starting $name"
-	if command -v kldload >/dev/null 2>&1; then
+	if type kldload >/dev/null 2>&1; then
 		kldload pf 2>/dev/null
 	fi
 	pfctl -q -F all

init.d/powerd.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 command=/usr/sbin/powerd
 command_args=$powerd_args

init.d/procfs.in

@@ -1,40 +1,73 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 description="Mounts misc filesystems in /proc."
 
 depend()
 {
-	use devfs
+	use modules devfs
-	want modules
 	need localmount
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
+	keyword -openvz -prefix -vserver -lxc
 }
 
 start()
 {
+	# Make sure we insert usbcore if it's a module
+	if [ -f /proc/modules -a ! -d /sys/module/usbcore -a ! -d /proc/bus/usb ]; then
+		modprobe -q usbcore
+	fi
+
+	[ -e /proc/filesystems ] || return 0
+
 	# Setup Kernel Support for miscellaneous Binary Formats
-	if [ -d /proc/sys/fs/binfmt_misc ] &&
+	if [ -d /proc/sys/fs/binfmt_misc -a ! -e /proc/sys/fs/binfmt_misc/register ]; then
-		[ ! -e /proc/sys/fs/binfmt_misc/register ]; then
-		if ! grep -qs binfmt_misc /proc/filesystems &&
-			modprobe -q binfmt-misc; then
-			ewarn "The binfmt-misc module needs to be configured in" \
-				"@SYSCONFDIR@/conf.d/modules or built in."
-		fi
 		if grep -qs binfmt_misc /proc/filesystems; then
 			ebegin "Mounting misc binary format filesystem"
 			mount -t binfmt_misc -o nodev,noexec,nosuid \
 				binfmt_misc /proc/sys/fs/binfmt_misc
+			if eend $? ; then
+				local fmts
+				ebegin "Loading custom binary format handlers"
+				fmts=$(grep -hsv -e '^[#;]' -e '^[[:space:]]*$' \
+					/run/binfmt.d/*.conf \
+					/etc/binfmt.d/*.conf \
+					""/usr/lib/binfmt.d/*.conf)
+				if [ -n "${fmts}" ]; then
+					echo "${fmts}" > /proc/sys/fs/binfmt_misc/register
+				fi
 				eend $?
+			fi
 		fi
 	fi
+
+	[ "$RC_SYS" = "OPENVZ" ] && return 0
+
+	# Check what USB fs the kernel support.  Currently
+	# 2.5+ kernels, and later 2.4 kernels have 'usbfs',
+	# while older kernels have 'usbdevfs'.
+	if [ -d /proc/bus/usb -a ! -e /proc/bus/usb/devices ]; then
+		local usbfs=$(grep -Fow usbfs /proc/filesystems ||
+			grep -Fow usbdevfs /proc/filesystems)
+		if [ -n "$usbfs" ]; then
+			ebegin "Mounting USB device filesystem [$usbfs]"
+			local usbgid="$(getent group usb | \
+				sed -e 's/.*:.*:\(.*\):.*/\1/')"
+			mount -t $usbfs \
+				-o ${usbgid:+devmode=0664,devgid=$usbgid,}noexec,nosuid \
+				usbfs /proc/bus/usb
+			eend $?
+		fi
+	fi
+
+	# Setup Kernel Support for SELinux
+	if [ -d /selinux ] && ! mountinfo -q /selinux; then
+		if grep -qs selinuxfs /proc/filesystems; then
+			ebegin "Mounting SELinux filesystem"
+			mount -t selinuxfs selinuxfs /selinux
+			eend $?
+		fi
+	fi
+
 	return 0
 }

init.d/rarpd.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
+#!@SBINDIR@/runscript
-# Copyright (c) 2007-2015 The OpenRC Authors.
+# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# See the Authors file at the top-level directory of this distribution and
+# Released under the 2-clause BSD license.
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
 
 command=/usr/sbin/rarpd
 command_args="-f $rarpd_args"