Begin port to GNU/kFreeBSD

This is just a minimal port to get Debian up and running; the rest will
be done later.

.gitignore

@@ -1 +1,16 @@
 *.bz2
+
+*.diff
+*.patch
+*.orig
+*.rej
+
+core
+.gdb_history
+.gdbinit
+
+.depend
+*.a
+*.o
+*.So
+lib*.so

FEATURE-REMOVAL-SCHEDULE

@@ -5,27 +5,6 @@ removed, it should also be removed from this file.
 
 ---------------------------
 
-What: rc_sys automatic detection code
-      - Functions for removal: rc_sys_v1, rc_sys_v2
-
-When: 2011/03/01
-
-Why: The original automatic sub-system detection is flawed in that it cannot
-	 safely detect some variables (Using cgroups confused it to think you were
-	 using LXC, and Prefix cannot be detect by definition). Also, almost all of
-	 the detection requires that /proc is available and readable. During early
-	 boot, /proc may not be mounted yet, leading to mis-detection. The readable
-	 condition can also fail under some hardened kernels when running as an
-	 unprivileged user.
-
-	 The new rc_sys_v2 function uses the rc_sys variable from rc.conf. After
-	 the removal, the contents of the rc_sys_v2 function will move into the
-	 rc_sys function.
-
-Who:  Robin H. Johnson <robbat2@gentoo.org>
-
----------------------------
-
 What: oldnet ADSL rp-pppoe mode
 
 When: undecided

Makefile

@@ -1,15 +1,10 @@
 # OpenRC Makefile
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 include Makefile.inc
 
-SUBDIR=		conf.d etc init.d local.d man scripts sh src
-
-# Build our old net foo or not
-ifeq (${MKOLDNET},yes)
-SUBDIR+=	net doc
-endif
+SUBDIR=		conf.d etc init.d local.d man scripts sh src sysctl.d
 
 # Build pkgconfig or not
 MKPKGCONFIG?=	yes
@@ -30,6 +25,10 @@ include ${MK}/dist.mk
 include ${MK}/git.mk
 
 _installafter:
+ifeq (${MKPREFIX},yes)
 	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/init.d
+else ifneq (${OS},Linux)
+	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/init.d
+endif
 	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/tmp
 	${ECHO} "${VERSION}${GITVER}" > ${DESTDIR}/${LIBEXECDIR}/version

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.8.1
+VERSION=	0.12.4
 PKG=		${NAME}-${VERSION}

README

@@ -10,13 +10,15 @@ You may wish to tweak the installation with the below arguments
 PROGLDFLAGS=-static
 LIBNAME=lib64
 DESTDIR=/tmp/openrc-image
+MKNET=no
 MKPAM=pam
+MKPREFIX=yes
 MKPKGCONFIG=no
-MKRCSYS=prefix
 MKSELINUX=yes
+MKSTATICLIBS=no
 MKTERMCAP=ncurses
 MKTERMCAP=termcap
-MKOLDNET=yes
+MKTOOLS=yes
 PKG_PREFIX=/usr/pkg
 LOCAL_PREFIX=/usr/local
 PREFIX=/usr/local
@@ -25,6 +27,8 @@ We don't support building a static OpenRC with PAM.
 You may need to use PROGLDFLAGS=-Wl,-Bstatic on glibc instead of just -static.
 If you debug memory under valgrind, add -DDEBUG_MEMORY to your CPPFLAGS
 so that all malloc memory should be freed at exit.
+If you are building OpenRC for a Gentoo Prefix installation, add
+MKPREFIX=yes.
 
 You can also brand OpenRC if you so wish like so
 BRANDING=\"Gentoo/$(uname -s)\"
@@ -34,20 +38,6 @@ LOCAL_PREFIX should be set when to where user maintained packages are.
 Only set LOCAL_PREFIX if different from PKG_PREFIX.
 PREFIX should be set when OpenRC is not installed to /.
 
-MKRCSYS should be set only if you need to specify a default system
-subtype. The subtype should be set to match the type of environment the
-file is installed into, not the virtualization the environment is
-capable of handling. Here is a list of subtypes and their meanings.
-
-jail	FreeBSD jail
-lxc	Linux container
-openvz	Linux OpenVZ
-prefix	Linux and *BSD prefix system
-uml	UsermodeLinux
-vserver	Linux vserver
-xen0 Linux and NetBSD xen0 Domain
-xenU Linux and NetBSD xenU Domain
-
 If any of the following files exist then we do not overwrite them
 /etc/devd.conf
 /etc/rc
@@ -67,12 +57,17 @@ init.d.misc is not installed by default as the scripts will need
 tweaking on a per distro basis. They are also non essential to the operation
 of the system.
 
+As of OpenRC-0.12, the net.* scripts, originally from Gentoo Linux, have
+been removed. If you need these scripts, look for a package called
+netifrc, which is maintained by them.
 
 Reporting Bugs
 --------------
-Bugs should go to the Gentoo Bugzilla:
+Since Gentoo Linux is hosting OpenRC development, Bugs should go to
+the Gentoo Bugzilla:
 	http://bugs.gentoo.org/
-You'll want the "Gentoo Linux" product and the "baselayout" component.
+They should be filed under the "Gentoo Hosted Projects" product and
+the "openrc" component.
 
 
 History - by Roy Marples

README.busybox

@@ -0,0 +1,28 @@
+Using Busybox as your Default Shell
+-----------------------------------
+
+
+If you have/bin/sh linked to busybox, you need to be aware of several
+incompatibilities between busybox's applets and the standalone
+counterparts. Since it is possible to configure busybox to not include
+these applets or to prefer the standalone counterparts, OpenRC does not
+attempt to support the busybox applets.
+
+All of these apply to busybox 1.20.2, which is the current version of
+busybox as of this writing.
+
+1. The start-stop-daemon applet is not compatible with start-stop-daemon
+in OpenRC. Please make sure CONFIG_START_STOP_DAEMON is not set to y in
+the configuration file you use to build busybox.
+
+2. The -O option for the mount applet does not support the [no]_netdev
+options from util-linux for handling network file systems.
+
+3. The umount applet does not support the -O option from util-linux.
+
+4. The swapon applet does not support the -e option from util-linux.
+
+5. the setfont applet does not support the -u option from kbd.
+
+There is work to get most of these supported by busybox, so this file
+will be updated as things change.

README.newnet

@@ -1,7 +1,3 @@
-The following applies only to the newnet stack, which is not presently
-maintained in OpenRC. The oldnet stack is maintained instead.
-- Robin H. Johnson <robbat2@gentoo.org>, 2011/02/21
-
 OpenRC Network Ideals
 ---------------------
 

STYLE

@@ -32,3 +32,54 @@ void foo(int c)
 
 	return ret;
 }
+
+##################
+# COMMIT MESSAGES #
+##################
+
+The following is an example of a correctly formatted git commit message
+for this repository. Most of this information came from this blog post
+[1], so I would like to thank the author.
+
+### cut here ###
+Capitalized, short (50 chars or less) summary
+
+More detailed explanatory text, if necessary.  Wrap it to about 72
+characters or so.  In some contexts, the first line is treated as the
+subject of an email and the rest of the text as the body.  The blank
+line separating the summary from the body is critical (unless you omit
+the body entirely); tools like rebase can get confused if you run the
+two together.
+
+Write your commit message in the imperative: "Fix bug" and not "Fixed
+bug."  This convention matches up with commit messages generated by
+commands like git merge and git revert.
+
+Further paragraphs come after blank lines.
+
+- Bullet points are okay, too
+
+- Typically a hyphen or asterisk is used for the bullet, preceded by a
+  single space, with blank lines in between, but conventions vary here
+
+- Use a hanging indent
+
+Reported-by: User Name <email>
+X-[Distro]-Bug: BugID
+X-[Distro]-Bug-URL: URL for the bug (on the distribution's web site typically)
+### cut here ###
+
+If you did not write the code and the patch does not include authorship
+information in a format git can use, please use the --author option of the
+git commit command to make the authorship correct.
+
+The Reported-by tag is required if the person who reported the bug is
+different from the author and committer.
+
+  The X-[Distro]-Bug/Bug-URL tags are required if this commit is related
+  to a bug reported to us by a specific distribution   of linux or a
+  *BSD. Also, [Distro] should be replaced with the name of the
+  distribution, e.g. X-Gentoo-Bug.
+
+[1] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html
+

TODO

@@ -1,7 +1,21 @@
-- ensure all forks block, restore and unblock signals. needs review 
+- ensure all forks block, restore and unblock signals. needs review
 
 - add support somehow for optional translations
 
 - oldnet[bridging]: Review setting of bridge configuration on dynamic interface add
 
 - Document rc-depend binary.
+
+- _ifindex is not a reliable means of calculating metrics:
+	_ifindex is used for calculating metrics for new devices but has a major
+	problem: Since it's only the nth entry in /proc/net/dev
+	And devices may be removed from that file, and reordered, you won't always
+	get the same result.
+	If you do:
+	- add eth0 - _ifindex (eth0=0)
+	- add vlan1 - _ifindex (eth0=0,vlan1=1)
+	- add vlan2 - _ifindex (eth0=0,vlan1=1,vlan2=2)
+	- rem vlan1 - _ifindex (eth0=0,vlan2=1)
+	- add vlan3 - _ifindex (eth0=0,vlan2=1,vlan3=2)
+	Now your routing table has entries for both vlan2 and vlan3 with a metric of 2.
+

conf.d/Makefile

@@ -1,19 +1,28 @@
-DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount network staticroute urandom
+include ../mk/net.mk
 
+DIR=	${CONFDIR}
+CONF=	bootmisc fsck hostname localmount netmount urandom tmpfiles \
+		${CONF-${OS}}
+
+ifeq (${MKNET},yes)
+CONF+= network staticroute
 TARGETS+=	network staticroute
 CLEANFILES+=	network staticroute
+endif
 
 MK=	../mk
 include ${MK}/os.mk
-include Makefile.${OS}
+
+CONF-FreeBSD=	ipfw moused powerd rarpd savecore syscons
+
+CONF-Linux=	consolefont dmesg hwclock keymaps killprocs modules
+
+CONF-NetBSD=	moused rarpd savecore
+
 include ${MK}/scripts.mk
 
-SOS?=	BSD
+network: network.in network${SFX}
+	cat $^ > $@
 
-network: network.in network.${SOS}
-	cp $@.in $@
-	[ -e $@.${SOS} ] && cat $@.${SOS} >> $@ || true
-
-staticroute: staticroute.${SOS}
-	cp $@.${SOS} $@
+staticroute: staticroute${SFX}
+	cp $@${SFX} $@

conf.d/Makefile.FreeBSD

@@ -1 +0,0 @@
-CONF+=	ipfw moused powerd rarpd savecore syscons

conf.d/Makefile.Linux

@@ -1,2 +0,0 @@
-CONF+=	consolefont dmesg hwclock keymaps modules
-SOS=	Linux

conf.d/Makefile.NetBSD

@@ -1 +0,0 @@
-CONF+=	moused rarpd savecore

conf.d/adjkerntz

@@ -1,10 +1,10 @@
 # Set CLOCK to "UTC" if your system clock is set to UTC (also known as
-# Greenwich Mean Time).  If your clock is set to the local time, then 
-# set CLOCK to "local".  Note that if you dual boot with Windows, then 
+# Greenwich Mean Time).  If your clock is set to the local time, then
+# set CLOCK to "local".  Note that if you dual boot with Windows, then
 # you should set it to "local".
 clock="UTC"
 
-# If you want to set the Hardware Clock to the current System Time 
+# If you want to set the Hardware Clock to the current System Time
 # during shutdown, then say "YES" here.
 # You normally don't need to do this if you run a ntp daemon.
 clock_systohc="NO"

conf.d/bootmisc

@@ -4,3 +4,7 @@ clean_tmp_dirs="/tmp"
 # Should we wipe the tmp paths completely or just selectively remove known
 # locks / files / etc... ?
 wipe_tmp="YES"
+
+# Write the initial dmesg log into /var/log/dmesg after boot
+# This may be useful if you need the kernel boot log afterwards
+log_dmesg="YES"

conf.d/consolefont

@@ -1,9 +1,10 @@
+# The consolefont service is not activated by default. If you need to
+# use it, you should run "rc-update add consolefont boot" as root.
+#
 # consolefont specifies the default font that you'd like Linux to use on the
 # console.  You can find a good selection of fonts in /usr/share/consolefonts;
 # you shouldn't specify the trailing ".psf.gz", just the font name below.
 # To use the default console font, comment out the CONSOLEFONT setting below.
-# This setting is used by the /etc/init.d/consolefont script (NOTE: if you do
-# not want to use it, run "rc-update del consolefont" as root).
 consolefont="default8x16"
 
 # consoletranslation is the charset map file to use.  Leave commented to use

conf.d/dmesg

@@ -1,3 +1,3 @@
 # Sets the level at which logging of messages is done to the
-# console.  See dmesg(8) for more info.
+# console.  See dmesg(1) for more info.
 dmesg_level="1"

conf.d/fsck

@@ -13,6 +13,13 @@
 #fsck_passno=">1"
 #fsck_passno="<2"
 
+# If passno is not enough granularity, you can also specify mountpoints to
+# check. This should NOT be used for the default non-multiplexed fsck, or your
+# system might not be checked. Additionally, it is mutually exclusive with
+# the fsck_passno setting.
+#fsck_mnt=""
+#fsck_mnt="/home"
+
 # Most modern fs's don't require a full fsck on boot, but for those that do
 # it may be advisable to skip this when running on battery.
 # WARNING: Do not turn this off if you have any JFS partitions.

conf.d/hwclock

@@ -1,22 +1,20 @@
 # Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
-# Greenwich Mean Time).  If that clock is set to the local time, then 
-# set CLOCK to "local".  Note that if you dual boot with Windows, then 
+# Greenwich Mean Time).  If that clock is set to the local time, then
+# set CLOCK to "local".  Note that if you dual boot with Windows, then
 # you should set it to "local".
 clock="UTC"
 
-# If you want to set the Hardware Clock to the current System Time 
-# (software clock) during shutdown, then say "YES" here.
-# You normally don't need to do this if you run a ntp daemon.
-clock_systohc="NO"
+# If you want the hwclock script to set the system time (software clock)
+# to match the current hardware clock during bootup, leave this
+# commented out.
+# However, you can set this to "NO" ifyou are running a modern kernel
+# with CONFIG_RTC_HCTOSYS set to y and your hardware clock set to UTC.
+#clock_hctosys="YES"
+
+# If you do not want to set the hardware clock to the current system
+# time (software clock) during shutdown, set this to no.
+#clock_systohc="YES"
 
-# If you want to set the system time to the current hardware clock
-# during bootup, then say "YES" here. You do not need this if you are
-# running a modern kernel with CONFIG_RTC_HCTOSYS set to y.
-# Also, be aware that if you set this to "NO", the system time will
-# never be saved to the hardware clock unless you set
-# clock_systohc="YES" above.
-clock_hctosys="YES"
- 
 # If you wish to pass any other arguments to hwclock during bootup,
 # you may do so here. Alpha users may wish to use --arc or --srm here.
 clock_args=""

conf.d/keymaps

@@ -1,4 +1,4 @@
-# Use KEYMAP to specify the default console keymap.  There is a complete tree
+# Use keymap to specify the default console keymap.  There is a complete tree
 # of keymaps in /usr/share/keymaps to choose from.
 keymap="us"
 
@@ -12,7 +12,7 @@ windowkeys="NO"
 extended_keymaps=""
 #extended_keymaps="backspace keypad euro2"
 
-# Tell dumpkeys(1) to interpret character action codes to be 
+# Tell dumpkeys(1) to interpret character action codes to be
 # from the specified character set.
 # This only matters if you set unicode="yes" in /etc/rc.conf.
 # For a list of valid sets, run `dumpkeys --help`

conf.d/killprocs

@@ -0,0 +1,3 @@
+# If you wish to pass any options to killall5 during shutdown,
+# you should do so here.
+killall5_opts=""

conf.d/modules

@@ -1,8 +1,10 @@
 # You can define a list modules for a specific kernel version,
 # a released kernel version, a main kernel version or just a list.
+# The most specific versioned variable will take precedence.
 #modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
 #modules_2_6_23="tun ieee1394"
 #modules_2_6="tun"
+#modules_2="ipv6"
 #modules="ohci1394"
 
 # You can give modules a different name when they load - the new name
@@ -10,10 +12,12 @@
 #modules="dummy:dummy1"
 
 # Give the modules some arguments if needed, per version if necessary.
+# Again, the most specific versioned variable will take precedence.
 #module_ieee1394_args="debug"
-#module_ieee1394_args_2_6_23_gentoo_r5="ieee1394 ohci1394"
-#module_ieee1394_args_2_6_23="tun ieee1394"
-#module_ieee1394_args_2_6="tun"
+#module_ieee1394_args_2_6_23_gentoo_r5="debug2"
+#module_ieee1394_args_2_6_23="debug3"
+#module_ieee1394_args_2_6="debug4"
+#module_ieee1394_args_2="debug5"
 
 # You should consult your kernel documentation and configuration
 # for a list of modules and their options.

conf.d/moused

@@ -11,6 +11,6 @@
 
 # You can also multiplex the init script for each device like so
 #   ln -s moused /etc/init.d/moused.ums0
-# This enables you to have a config file per mouse (forces moused_device 
+# This enables you to have a config file per mouse (forces moused_device
 # to ums0 in this case) and control each mouse.
 # devd can also start and stop these mice, which laptop users will find handy.

conf.d/net

@@ -1,4 +0,0 @@
-# This blank configuration will automatically use DHCP for any net.*
-# scripts in /etc/init.d.  To create a more complete configuration,
-# please review /usr/share/doc/openrc/net.example and save your configuration
-# in /etc/conf.d/net (this file :]!).

conf.d/netmount

@@ -0,0 +1,40 @@
+# You will need to set the dependencies in the netmount script to match
+# the network configuration tools you are using. This should be done in
+# this file by following the examples below, and not by changing the
+# service script itself.
+#
+# Each of these examples is meant to be used separately. So, for
+# example, do not set rc_need to something like "net.eth0 dhcpcd".
+#
+# If you are using newnet and configuring your interfaces with static
+# addresses with the network script, you  should use this setting.
+#
+#rc_need="network"
+#
+# If you are using oldnet, you must list the specific net.* services you
+# need.
+#
+# This example assumes all of your netmounts can be reached on
+# eth0.
+#
+#rc_need="net.eth0"
+#
+# This example assumes some of your netmounts are on eth1 and some
+# are on eth2.
+#
+#rc_need="net.eth1 net.eth2"
+#
+# If you are using a dynamic network management tool like
+# networkmanager, dhcpcd in standalone mode, wicd, badvpn-ncd, etc, to
+# manage the network interfaces with the routes to your netmounts, you
+# should list that tool.
+#
+#rc_need="networkmanager"
+#rc_need="dhcpcd"
+#rc_need="wicd"
+#
+# The default setting is designed to be backward compatible with our
+# current setup, but you are highly discouraged from using this. In
+# other words, please change it to be more suited to your system.
+#
+rc_need="net"

conf.d/network.in

@@ -7,7 +7,7 @@
 # You also have ifup_eth0 and ifdown_eth0 to run other commands when
 # eth0 is started and stopped.
 # You should note that we don't stop the network at system shutdown by default.
-# If you really need this, then set shutdown_network=YES
+# If you really need this, then set keep_network=NO
 
 # Lastly, the interfaces variable pulls in virtual interfaces that cannot
 # be automatically detected.

conf.d/tmpfiles

@@ -0,0 +1,3 @@
+# Extra options for tmpfiles.sh
+#tmpfiles_opts="--verbose"
+tmpfiles_opts=""

conf.d/urandom

@@ -2,4 +2,4 @@
 # (say for crypt swap), so you will need to customize this
 # behavior.  If you have /var on a separate partition, then
 # make sure this path lives on your root device somewhere.
-urandom_seed="/var/run/random-seed"
+urandom_seed="/var/lib/misc/random-seed"

doc/.gitignore

@@ -1 +0,0 @@
-net.example

doc/Makefile

@@ -1,7 +0,0 @@
-DIR=	${DOCDIR}/openrc
-INC=	net.example
-
-MK=	../mk
-include ${MK}/os.mk
-include Makefile.${OS}
-include ${MK}/scripts.mk

doc/Makefile.FreeBSD

@@ -1,5 +0,0 @@
-SRCS+=		net.example.in
-
-.SUFFIXES:	.BSD.in
-.BSD.in:
-	${CP} $< $@

doc/Makefile.Linux

@@ -1,5 +0,0 @@
-SRCS+=		net.example.in
-
-.SUFFIXES:	.Linux.in
-.Linux.in:
-	${CP} $< $@

doc/Makefile.NetBSD

@@ -1,5 +0,0 @@
-SRCS+=		net.example.in
-
-.SUFFIXES:	.BSD.in
-.BSD.in:
-	${CP} $< $@

doc/net.example.BSD.in

@@ -1,440 +0,0 @@
-##############################################################################
-# QUICK-START
-#
-# The quickest start is if you want to use DHCP.
-# In that case, everything should work out of the box, no configuration
-# necessary, though the startup script will warn you that you haven't
-# specified anything.
-
-# WARNING :- some examples have a mixture of IPv4 (ie 192.168.0.1) and IPv6
-# (ie 4321:0:1:2:3:4:567:89ab) internet addresses. They only work if you have
-# the relevant kernel option enabled. So if you don't have an IPv6 enabled
-# kernel then remove the IPv6 address from your config.
-
-# If you want to use a static address or use DHCP explicitly, jump
-# down to the section labeled INTERFACE HANDLERS.
-#
-# If you want to do anything more fancy, you should take the time to
-# read through the rest of this file.
-
-##############################################################################
-# MODULES
-#
-# We now support modular networking scripts which means we can easily
-# add support for new interface types and modules while keeping
-# compatibility with existing ones.
-#
-# Modules load by default if the package they need is installed.  If
-# you specify a module here that doesn't have its package installed
-# then you get an error stating which package you need to install.
-# Ideally, you only use the modules setting when you have two or more
-# packages installed that supply the same service.
-#
-# In other words, you probably should DO NOTHING HERE...
-
-##############################################################################
-# INTERFACE HANDLERS
-
-# For a static configuration, use something like this
-#config_eth0="192.168.0.2/24"
-
-# If you need more than one address, you can use something like this
-# NOTE: ifconfig creates an aliased device for each extra IPv4 address
-#       (eth0:1, eth0:2, etc)
-#       iproute2 does not do this as there is no need to
-#config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
-
-# You can also use IPv6 addresses
-# (you should always specify a prefix length with IPv6 here)
-#config_eth0="192.168.0.2/24 4321:0:1:2:3:4:567:89ab/64 4321:0:1:2:3:4:567:89ac/64"
-
-# If you wish to keep existing addresses + routing and the interface is up,
-# you can specify a noop (no operation). If the interface is down or there
-# are no addresses assigned, then we move onto the next step (default dhcp)
-# This is useful when configuring your interface with a kernel command line
-# or similar
-#config_eth0="noop 192.168.0.2/24"
-
-# If you don't want ANY address (only useful when calling for advanced stuff)
-#config_eth0="null"
-
-# Here's how to do routing if you need it
-# We add an IPv4 default route, IPv4 subnet route and an IPv6 unicast route
-#routes_eth0="default via 192.168.0.1
-#10.0.0.0/8 via 192.168.0.1
-#::/0"
-
-# If a specified module fails (like dhcp - see below), you can specify a
-# fallback like so
-#fallback_eth0="192.168.0.2 netmask 255.255.255.0"
-#fallback_routes_eth0="default via 192.168.0.1"
-
-# NOTE: fallback entry must match the entry location in config_eth0
-# As such you can only have one fallback route.
-# Also, if you do not set a fallback_routes entry for an interface, the
-# routes entry will be used if that is set.
-
-# Some users may need to alter the MTU - here's how
-#mtu_eth0="1500"
-
-# Most drivers that report carrier status function correctly, but some do not
-# One of these faulty drivers is for the Intel e1000 network card, but only
-# at boot time. To get around this you may alter the carrier_timeout value for
-# the interface. -1 is disable, 0 is infinite and any other number of seconds
-# is how long we wait for carrier. The current default is 3 seconds
-#carrier_timeout_eth0=-1
-
-# You may wish to disable the interface being brought down when stopping.
-# This is only of use for WakeOnLan.
-#ifdown_eth0="NO"
-
-##############################################################################
-# OPTIONAL MODULES
-
-#-----------------------------------------------------------------------------
-# WIRELESS (802.11 support)
-# Wireless can be provided by BSDs ifconfig (iwconfig) or wpa_supplicant
-# wpa_supplicant is preferred, use the modules directive to prefer iwconfig.
-#modules="iwconfig"
-
-# ifconfig (iwconig) support is a one shot script - wpa_supplicant is daemon
-# that scans, associates and re-configures if association is lost.
-# We call it iwconfig to separate the wireless setup from ifconfig.
-####################################
-# HINTS
-#
-# Most users will just need to set the following options
-# key_SSID1="s:yourkeyhere enc open" # s: means a text key
-# key_SSID2="aaaa-bbbb-cccc-dd"      # no s: means a hex key
-# preferred_aps="SSID1 SSID2"
-#
-# Clear? Good. Now configure your wireless network below
-
-####################################
-# SETTINGS
-# Hard code an SSID to an interface - leave this unset if you wish the driver
-# to scan for available Access Points
-# I would only set this as a last resort really - use the preferred_aps
-# setting at the bottom of this file
-#essid_eth0='foo'
-
-# Some drivers/hardware don't scan all that well. We have no control over this
-# but we can say how many scans we want to do to try and get a better sweep of
-# the area. The default is 1.
-#scans_eth0="1"
-
-#Channel can be set (1-14), but defaults to 3 if not set.
-#
-# The below is taken verbatim from the BSD wavelan documentation found at
-# http://www.netbsd.org/Documentation/network/wavelan.html
-# There are 14 channels possible; We are told that channels 1-11 are legal for
-# North America, channels 1-13 for most of Europe, channels 10-13 for France,
-# and only channel 14 for Japan. If in doubt, please refer to the documentation
-# that came with your card or access point. Make sure that the channel you
-# select is the same channel your access point (or the other card in an ad-hoc
-# network) is on. The default for cards sold in North America and most of Europe
-# is 3; the default for cards sold in France is 11, and the default for cards
-# sold in Japan is 14.
-#channel_eth0="3"
-
-# Setup any other config commands. This is basically the ifconfig argument
-# without the ifconfig $iface.
-#ifconfig_eth0=""
-# You can do the same per SSID too.
-#ifconfig_SSID=""
-
-# Seconds to wait until associated. The default is to wait 10 seconds.
-# 0 means wait indefinitely. WARNING: this can cause an infinite delay when
-# booting.
-#associate_timeout_eth0="5"
-
-# Define a WEP key per SSID or MAC address (of the AP, not your card)
-# The encryption type (open or restricted) must match the
-# encryption type on the Access Point.
-# To set a hex key, prefix with 0x
-#key_SSID="0x12341234123412341234123456"
-# or you can use strings. Passphrase IS NOT supported
-#key_SSID="foobar"
-#key_SSID="foobar"
-
-# WEP key for the AP with MAC address 001122334455
-#mac_key_001122334455="foobar"
-
-# You can also override the interface settings found in /etc/conf.d/net
-# per SSID - which is very handy if you use different networks a lot
-#config_SSID="dhcp"
-#routes_SSID=
-#fallback_SSID=
-
-# Setting name/domain server causes /etc/resolv.conf to be overwritten
-# Note that if DHCP is used, and you want this to take precedence then
-# please put -R in your dhcpcd options
-#dns_servers_SSID="192.168.0.1 192.168.0.2"
-#dns_domain_SSID="some.domain"
-#dns_search_SSID="search.this.domain search.that.domain"
-# Please check the man page for resolv.conf for more information
-# as domain and search (searchdomains) are mutually exclusive and
-# searchdomains takes precedence
-
-# You can also set any of the /etc/conf.d/net variables per MAC address
-# incase you use Access Points with the same SSID but need different
-# networking configs. Below is an example - of course you use the same
-# method with other variables
-#config_001122334455="dhcp"
-#dns_servers_001122334455="192.168.0.1 192.168.0.2"
-
-# Map a MAC address to an SSID
-# This is used when the Access Point is not broadcasting its SSID
-# WARNING: This will override the SSID being broadcast due to some
-# Access Points sending an SSID even when they have been configured
-# not to!
-# Change 001122334455 to the MAC address and SSID to the SSID
-# it should map to
-#mac_essid_001122334455="SSID"
-
-# This lists the preferred SSIDs to connect to in order
-# SSID's can contain any characters here as they must match the broadcast
-# SSID exactly.
-# Surround each SSID with the " character and separate them with a space
-# If the first SSID isn't found then it moves onto the next
-# If this isn't defined then it connects to the first one found
-#preferred_aps="SSID1 SSID2"
-
-# You can also define a preferred_aps list per interface
-#preferred_aps_eth0="SSID3 SSID4"
-
-# You can also say whether we only connect to preferred APs or not
-# Values are "any", "preferredonly", "forcepreferred", "forcepreferredonly"
-# and "forceany"
-# "any" means it will connect to visible APs in the preferred list and then
-# any other available AP
-# "preferredonly" means it will only connect to visible APs in the preferred
-# list
-# "forcepreferred" means it will forcibly connect to APs in order if it does
-# not find them in a scan
-# "forcepreferredonly" means it forcibly connects to the APs in order and
-# does not bother to scan
-# "forceany" does the same as forcepreferred + connects to any other
-# available AP
-# Default is "any"
-#associate_order="any"
-#associate_order_eth0="any"
-
-# You can define blacklisted Access Points in the same way
-#blacklist_aps="SSID1 SSID2"
-#blacklist_aps_eth0="SSID3 SSID4"
-
-# If you have more than one wireless card, you can say if you want
-# to allow each card to associate with the same Access Point or not
-# Values are "yes" and "no"
-# Default is "yes"
-#unique_ap="yes"
-#unique_ap_eth0="yes"
-
-# IMPORTANT: preferred_only, blacklisted_aps and unique_ap only work when
-# essid_eth0 is not set and your card is capable of scanning
-
-# NOTE: preferred_aps  list ignores blacklisted_aps - so if you have
-# the same SSID in both, well, you're a bit silly :p
-
-##################################################
-# wpa_supplicant
-# emerge net-wireless/wpa_supplicant
-# Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Consult the wpa_supplicant.conf.example that is installed in
-# /usr/share/doc/wpa_supplicant
-
-# By default we don't wait for wpa_supplicant to associate and authenticate.
-# If you would like to, so can specify how long in seconds
-#associate_timeout_eth0=60
-# A value of 0 means wait forever.
-
-# You can also override any settings found here per SSID - which is very
-# handy if you use different networks a lot. See below for using the SSID
-# in our variables
-#config_SSID="dhcp"
-# See the System module below for setting dns/nis/ntp per SSID
-
-# You can also override any settings found here per MAC address of the AP
-# in case you use Access Points with the same SSID but need different
-# networking configs. Below is an example - of course you use the same
-# method with other variables
-#mac_config_001122334455="dhcp"
-#mac_dns_servers_001122334455="192.168.0.1 192.168.0.2"
-
-# When an interface has been associated with an Access Point, a global
-# variable called SSID is set to the Access Point's SSID for use in the
-# pre/post user functions below (although it's not available in preup as you
-# won't have associated then)
-
-# If you're using anything else to configure wireless on your interface AND
-# you have installed wpa_supplicant, you need to disable wpa_supplicant
-#modules="!iwconfig !wpa_supplicant"
-#or
-#modules="!wireless"
-
-##############################################################################
-# WIRELESS SSID IN VARIABLES
-##############################################################################
-# Remember to change SSID to your SSID.
-# Say that your SSID is My NET - the line
-#      #key_SSID="s:passkey"
-# becomes
-#      #key_My_NET="s:passkey"
-# Notice that the space has changed to an underscore - do the same with all
-# characters not in a-z A-Z (English alphabet) 0-9. This only applies to
-# variables and not values.
-#
-# Any SSID's in values like essid_eth0="My NET" may need to be escaped
-# This means placing the character \ before the character
-# \" need to be escaped for example
-# So if your SSID is
-#      My "\ NET
-# it becomes
-#      My \"\\ NET
-# for example
-#      #essid_eth0="My\"\\NET"
-#
-# So using the above we can use
-#      #dns_domain_My____NET="My\"\\NET"
-# which is an invalid dns domain, but shows the how to use the variable
-# structure
-#########################################################
-
-#-----------------------------------------------------------------------------
-# DHCP
-# DHCP can be provided by dhclient.
-#
-# dhcpcd:   emerge net-misc/dhcpcd
-# dhclient: emerge net-misc/dhcp
-
-# Regardless of which DHCP client you prefer, you configure them the
-# same way using one of following depending on which interface modules
-# you're using.
-#config_eth0="dhcp"
-
-# For passing custom options to dhcpcd use something like the following.  This
-# example reduces the timeout for retrieving an address from 60 seconds (the
-# default) to 10 seconds.
-#dhcpcd_eth0="-t 10"
-
-# GENERIC DHCP OPTIONS
-# Set generic DHCP options like so
-#dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
-
-# This tells the dhcp client to release its lease when it stops, not to
-# overwrite dns, ntp and nis settings, not to set a default route and not to
-# send the current hostname to the dhcp server and when it starts.
-# You can use any combination of the above options - the default is not to
-# use any of them.
-
-
-#-----------------------------------------------------------------------------
-# System
-# For configuring system specifics such as domain, dns, ntp and nis servers
-# It's rare that you would need todo this, but you can anyway.
-# This is most benefit to wireless users who don't use DHCP so they can change
-# their configs based on SSID.
-
-# If you omit the _eth0 suffix, then it applies to all interfaces unless
-# overridden by the interface suffix.
-#dns_domain_eth0="your.domain"
-#dns_servers_eth0="192.168.0.2 192.168.0.3"
-#dns_search_eth0="this.domain that.domain"
-#dns_options_eth0="timeout:1 rotate"
-#dns_sortlist_eth0="130.155.160.0/255.255.240.0 130.155.0.0"
-# See the man page for resolv.conf for details about the options and sortlist
-# directives
-
-#ntp_servers_eth0="192.168.0.2 192.168.0.3"
-
-#nis_domain_eth0="domain"
-#nis_servers_eth0="192.168.0.2 192.168.0.3"
-
-# NOTE: Setting any of these will stamp on the files in question. So if you
-# don't specify dns_servers but you do specify dns_domain then no nameservers
-# will be listed in /etc/resolv.conf even if there were any there to start
-# with.
-# If this is an issue for you then maybe you should look into a resolv.conf
-# manager like resolvconf-gentoo to manage this file for you. All packages
-# that baselayout supports use resolvconf-gentoo if installed.
-
-# If you run any services on net.lo which need localmount, either the
-# services or net.lo should explicitly bring in localmount.
-# If you do not do this, openrc will try to bring up net.lo as soon as
-# possible, which may be too early for your services.
-# If you use network file systems for your core system this may
-# interfere.
-# Also, you may need this if 127.0.0.1 is in your /etc/resolv.conf.
-#rc_net_lo0_need="localmount"
-
-#-----------------------------------------------------------------------------
-# Cable in/out detection
-# Sometimes the cable is in, others it's out. Obviously you don't want to
-# restart net.eth0 every time when you plug it in either.
-# BSD has the Device State Change Daemon - or devd for short
-# To enable this,  simple add devd to the boot runlevel
-#rc-update add devd boot
-#rc
-
-##############################################################################
-# ADVANCED CONFIGURATION
-#
-# Four functions can be defined which will be called surrounding the
-# start/stop operations.  The functions are called with the interface
-# name first so that one function can control multiple adapters. An extra two
-# functions can be defined when an interface fails to start or stop.
-#
-# The return values for the preup and predown functions should be 0
-# (success) to indicate that configuration or deconfiguration of the
-# interface can continue.  If preup returns a non-zero value, then
-# interface configuration will be aborted.  If predown returns a
-# non-zero value, then the interface will not be allowed to continue
-# deconfiguration.
-#
-# The return values for the postup, postdown, failup and faildown functions are
-# ignored since there's nothing to do if they indicate failure.
-#
-# ${IFACE} is set to the interface being brought up/down
-# ${IFVAR} is ${IFACE} converted to variable name bash allows
-
-#preup() {
-#	# Remember to return 0 on success
-#	return 0
-#}
-
-#predown() {
-#	# The default in the script is to test for NFS root and disallow
-#	# downing interfaces in that case.  Note that if you specify a
-#	# predown() function you will override that logic.  Here it is, in
-#	# case you still want it...
-#	if is_net_fs /; then
-#		eerror "root filesystem is network mounted -- can't stop ${IFACE}"
-#		return 1
-#	fi
-#
-#	# Remember to return 0 on success
-#	return 0
-#}
-
-#postup() {
-#	# This function could be used, for example, to register with a
-#	# dynamic DNS service.  Another possibility would be to
-#	# send/receive mail once the interface is brought up.
-
-#}
-
-#postdown() {
-#	# Return 0 always
-#	return 0
-#}
-
-#failup() {
-#       # This function is mostly here for completeness... I haven't
-#       # thought of anything nifty to do with it yet ;-)
-#}
-
-#faildown() {
-#       # This function is mostly here for completeness... I haven't
-#       # thought of anything nifty to do with it yet ;-)
-#}

etc/Makefile

@@ -1,21 +1,28 @@
 DIR=	${SYSCONFDIR}
-CONF=	rc.conf
+SRCS=	rc.conf.in rc.in rc.shutdown.in
+BIN=	${BIN-${OS}}
+CONF=	rc.conf ${BIN-${OS}}
 
 CLEANFILES+=	rc.conf
 
 MK=	../mk
 include ${MK}/os.mk
-include Makefile.${OS}
+
+SED_EXTRA-FreeBSD=	-e 's:@TERM@:cons25:g'
+BIN-FreeBSD=		rc rc.shutdown rc.devd
+CONF-FreeBSD=		devd.conf
+
+SED_EXTRA-Linux=	-e 's:@TERM@:wsvt25:g'
+BIN-Linux=
+CONF-Linux=
+
+SED_EXTRA-NetBSD=	-e 's:@TERM@:wsvt25:g'
+BIN-NetBSD=		rc rc.shutdown
+CONF-NetBSD=
+
+SED_EXTRA=	${SED_EXTRA-${OS}}
+
 include ${MK}/scripts.mk
 
-# We can't use "ifndef" here because that treats set-but-empty
-# as not-set which is not what we want
-MKRCSYS ?= automagicplease
-ifeq ($(MKRCSYS),automagicplease)
-# If the user isn't picking a default, then have the
-# config go with runtime automagic detection #357247
-rc.conf: SED_EXTRA += -e '/^rc_sys=""/s:^:\#:'
-MKRCSYS =
-endif
 rc.conf: rc.conf.in rc.conf.${OS}
 	${SED} ${SED_REPLACE} ${SED_EXTRA} $^ > $@

etc/Makefile.FreeBSD

@@ -1,4 +0,0 @@
-SED_EXTRA=	-e 's:@TERM@:cons25:g'
-SRCS+=		rc.conf.in rc.in rc.shutdown.in
-CONF+=		devd.conf
-BIN+=		rc rc.shutdown rc.devd

etc/Makefile.Linux

@@ -1,2 +0,0 @@
-SED_EXTRA=	-e 's:@TERM@:wsvt25:g'
-SRCS+=		rc.conf.in rc.in rc.shutdown.in

etc/Makefile.NetBSD

@@ -1,3 +0,0 @@
-SED_EXTRA=	-e 's:@TERM@:wsvt25:g'
-SRCS+=		rc.conf.in rc.in rc.shutdown.in
-BIN+=		rc rc.shutdown

etc/rc.conf.DragonFly

@@ -0,0 +1,13 @@
+##############################################################################
+# DragonFly BSD SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on DragonFly BSD:
+# ""        - nothing special
+# "jail"    - DragonFly BSD jails
+# "prefix"  - Prefix
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""
+

etc/rc.conf.FreeBSD

@@ -1,11 +1,13 @@
+##############################################################################
+# FreeBSD SPECIFIC OPTIONS
+
 # This is the subsystem type. Valid options on FreeBSD:
 # ""        - nothing special
 # "jail"    - FreeBSD jails
 # "prefix"  - Prefix
-# If this is commented out, automatic detection will be attempted.
-# Note that automatic detection does not work in a prefix environment.
+# If this is commented out, automatic detection will be used.
 #
 # This should be set to the value representing the environment this file is
 # PRESENTLY in, not the virtualization the environment is capable of.
-rc_sys="@RC_SYS_DEFAULT@"
+#rc_sys=""
 

etc/rc.conf.GNU-kFreeBSD

@@ -0,0 +1,11 @@
+##############################################################################
+# GNU/kFreeBSD SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on GNU/kFreeBSD:
+# ""        - nothing special
+# "jail"    - FreeBSD jails (not yet implemented)
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""

etc/rc.conf.Linux

@@ -1,3 +1,6 @@
+##############################################################################
+# LINUX SPECIFIC OPTIONS
+
 # This is the subsystem type. Valid options on Linux:
 # ""        - nothing special
 # "lxc"     - Linux Containers
@@ -7,18 +10,69 @@
 # "vserver" - Linux vserver
 # "xen0"    - Xen0 Domain
 # "xenU"    - XenU Domain
-# If this is commented out, automatic detection will be attempted.
-# Note that autodetection will not work in a prefix environment or in a
-# linux container.
+# If this is commented out, automatic detection will be used.
 #
 # This should be set to the value representing the environment this file is
 # PRESENTLY in, not the virtualization the environment is capable of.
-rc_sys="@RC_SYS_DEFAULT@"
-
-##############################################################################
-# LINUX SPECIFIC OPTIONS
+#rc_sys=""
 
 # This is the number of tty's used in most of the rc-scripts (like
 # consolefont, numlock, etc ...)
 rc_tty_number=12
 
+##############################################################################
+# CGROUPS RESOURCE MANAGEMENT
+
+# If you have cgroups turned on in your kernel, this switch controls
+# whether or not a group for each controller is mounted under
+# /sys/fs/cgroup.
+# None of the other options in this section work if this is set to "NO".
+#rc_controller_cgroups="YES"
+
+# The following settings allow you to set up values for the cgroup
+# controllers for your services.
+# They can be set in this file;, however, if you do this, the settings
+# will apply to all of your services.
+# If you want different settings for each service, place the settings in
+# /etc/conf.d/foo for service foo.
+# The format is to specify the names of the settings followed by their
+# values. Each variable can hold multiple settings.
+# For example, you would use this to set the cpu.shares setting in the
+# cpu controller to 512 for your service.
+# rc_cgroup_cpu="
+# cpu.shares 512
+# "
+#
+#For more information about the adjustments that can be made with
+#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
+
+# Set the blkio controller settings for this service.
+#rc_cgroup_blkio=""
+
+# Set the cpu controller settings for this service.
+#rc_cgroup_cpu=""
+
+# Add this service to the cpuacct controller (any value means yes).
+#rc_cgroup_cpuacct=""
+
+# Set the cpuset controller settings for this service.
+#rc_cgroup_cpuset=""
+
+# Set the devices controller settings for this service.
+#rc_cgroup_devices=""
+
+# Set the memory controller settings for this service.
+#rc_cgroup_memory=""
+
+# Set the net_prio controller settings for this service.
+#rc_cgroup_net_prio=""
+
+# Set this to YES if yu want all of the processes in a service's cgroup
+# killed when the service is stopped or restarted.
+# This should not be set globally because it kills all of the service's
+# child processes, and most of the time this is undesirable. Please set
+# it in /etc/conf.d/<service>.
+# To perform this cleanup manually for a stopped service, you can
+# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
+# rc-service <service> cgroup_cleanup.
+# rc_cgroup_cleanup="NO"

etc/rc.conf.NetBSD

@@ -1,12 +1,14 @@
+##############################################################################
+# NetBSD SPECIFIC OPTIONS
+
 # This is the subsystem type. Valid options on NetBSD:
 # ""        - nothing special
 # "prefix"  - Prefix
 # "xen0"    - Xen0 Domain
 # "xenU"    - XenU Domain
-# If this is commented out, automatic detection will be attempted.
-# Note that automatic detection does not work in a prefix environment.
+# If this is commented out, automatic detection will be used.
 #
 # This should be set to the value representing the environment this file is
 # PRESENTLY in, not the virtualization the environment is capable of.
-rc_sys="@RC_SYS_DEFAULT@"
+#rc_sys=""
 

etc/rc.conf.in

@@ -47,6 +47,10 @@
 # logging can take place and as such cannot log the sysinit runlevel.
 #rc_logger="YES"
 
+# Through rc_log_path you can specify a custom log file.
+# The default value is: /var/log/rc.log
+#rc_log_path="/var/log/rc.log"
+
 # By default we filter the environment for our running scripts. To allow other
 # variables through, add them here. Use a * to allow all variables through.
 #rc_env_allow="VAR1 VAR2"
@@ -76,6 +80,10 @@
 # Set unicode to YES to turn on unicode support for keyboards and screens.
 #unicode="NO"
 
+# This is how long fuser should wait for a remote server to respond. The
+# default is 60 seconds, but  it can be adjusted here.
+#rc_fuser_timeout=60
+
 # Below is the default list of network fstypes.
 #
 # afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
@@ -90,10 +98,14 @@
 # These variables are documented here, but should be configured in
 # /etc/conf.d/foo for service foo and NOT enabled here unless you
 # really want them to work on a global basis.
+# If your service has characters in its name which are not legal in
+# shell variable names and you configure the variables for it in this
+# file, those characters should be replaced with underscores in the
+# variable names as shown below.
 
 # Some daemons are started and stopped via start-stop-daemon.
 # We can set some things on a per service basis, like the nicelevel.
-#export SSD_NICELEVEL="-19"
+#SSD_NICELEVEL="-19"
 
 # Pass ulimit parameters
 #rc_ulimit="-u 30"
@@ -112,6 +124,13 @@
 #rc_foo_need="openvpn"
 #rc_foo_after="clock"
 
+# Below is an example for service foo-bar. Note that the '-' is illegal
+# in a shell variable name, so we convert it to an underscore.
+# example for service foo-bar.
+#rc_foo_bar_config="/etc/foo-bar"
+#rc_foo_bar_need="openvpn"
+#rc_foo_bar_after="clock"
+
 # You can also remove dependencies.
 # This is mainly used for saying which servies do NOT provide net.
 #rc_net_tap0_provide="!net"

etc/rc.devd

@@ -1,10 +1,11 @@
 #!/bin/sh
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # Inform RC that we are in the background and hotplugged
-export IN_BACKGROUND=yes
-export IN_HOTPLUG=yes
+IN_BACKGROUND=yes
+IN_HOTPLUG=yes
+export IN_BACKGROUND IN_HOTPLUG
 
 getmedia() {
 	ifconfig "$1" | while read line; do

etc/rc.in

@@ -1,10 +1,10 @@
 #!@SHELL@
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)
-[ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@"
+[ -z "$TERM" -o "$TERM" = "dumb" ] && TERM="@TERM@" && export TERM
 
 # Handle interrupts
 trap : SIGINT

etc/rc.shutdown.in

@@ -1,17 +1,17 @@
 #!@SHELL@
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # Handle interrupts
 trap : SIGINT SIGQUIT
 
 # Try and use stuff in /lib over anywhere else so we can shutdown
 # local mounts correctly.
-export LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}"
+LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}" ; export LD_LIBRARY_PATH
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)
-[ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@"
+[ -z "$TERM" -o "$TERM" = "dumb" ] && TERM="@TERM@" && export TERM
 
 action=${1:-shutdown}
 exec /sbin/rc "${action}"

init.d.misc/Makefile

@@ -7,5 +7,5 @@ MK=	../mk
 
 SED_EXTRA+= -e 's:@VARBASE@:/var:g'
 
+include ${MK}/os.mk
 include ${MK}/scripts.mk
-include Makefile.${OS}

init.d.misc/Makefile.FreeBSD

@@ -1 +0,0 @@
-PKG_PREFIX?=	/usr/local

init.d.misc/Makefile.Linux

@@ -1 +0,0 @@
-PKG_PREFIX?=/usr

init.d.misc/Makefile.NetBSD

@@ -1 +0,0 @@
-PKG_PREFIX?=	/usr/pkg

init.d.misc/avahi-dnsconfd.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/avahi-dnsconfd
 command_args="$avahi_dnsconfd_args -D"

init.d.misc/avahid.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/avahi-daemon
 command_args="$avahid_args -D"

init.d.misc/dbus.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/bin/dbus-daemon
 pidfile=@VARBASE@/run/dbus/pid

init.d.misc/dhcpcd.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/sbin/dhcpcd
 pidfile=/var/run/dhcpcd.pid

init.d.misc/dnsmasq.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/dnsmasq
 command_args=$dnsmasq_args

init.d.misc/hald.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/hald
 pidfile=@VARBASE@/run/hald/hald.pid

init.d.misc/named.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/named
 command_args=$named_args

init.d.misc/ntpd.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 : ${ntpd_config:=/etc/ntp.conf}
 : ${ntpd_drift:=/var/db/ntpd.drift}

init.d.misc/openvpn.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 vpn=${RC_SVCNAME#*.}
 name="OpenVPN"

init.d.misc/polkitd.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/polkitd
 pidfile=@VARBASE@/run/polkitd/polkitd.pid

init.d.misc/sshd.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/sshd
 command_args=$sshd_args

init.d.misc/wpa_supplicant.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/usr/sbin/wpa_supplicant
 : ${wpa_supplicant_conf:=/etc/wpa_supplicant.conf}

init.d/.gitignore

@@ -11,6 +11,7 @@ network
 root
 savecache
 swap
+swapfiles
 sysctl
 urandom
 devfs
@@ -40,3 +41,4 @@ syslogd
 termencoding
 ttys
 wscons
+tmpfiles.setup

init.d/Makefile

@@ -1,25 +1,39 @@
+include ../mk/net.mk
+
 DIR=	${INITDIR}
-SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
-	network.in root.in savecache.in staticroute.in swap.in swclock.in \
-	sysctl.in urandom.in
+SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in loopback.in \
+	netmount.in root.in savecache.in swap.in swapfiles.in \
+	tmpfiles.setup.in swclock.in sysctl.in urandom.in ${SRCS-${OS}}
 BIN=	${OBJS}
 
-# Build our old net foo or not
-ifeq (${MKOLDNET},yes)
-_OLDNET=	net.lo
+# Are we installing our network scripts?
+ifeq (${MKNET},yes)
+SRCS+= network.in staticroute.in
 endif
-_NET_LO=	${_OLDNET}
-
-INSTALLAFTER=	_installafter_${_NET_LO}
-CLEANFILES+=	${_NET_LO}
-TARGETS+=	${_NET_LO}
 
 MK=	../mk
 include ${MK}/os.mk
-include Makefile.${OS}
+
+# Generic BSD scripts
+SRCS-FreeBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
+		rpcbind.in savecore.in syslogd.in
+# These are FreeBSD specific
+SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in encswap.in ipfw.in \
+		mixer.in nscd.in powerd.in syscons.in
+
+SRCS-Linux=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in \
+		killprocs.in modules.in mount-ro.in mtab.in numlock.in \
+		procfs.in sysfs.in termencoding.in tmpfiles.dev.in
+
+# Generic BSD scripts
+SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
+		rpcbind.in savecore.in syslogd.in
+# These are NetBSD specific
+SRCS-NetBSD+=	devdb.in swap-blk.in ttys.in wscons.in
+
+%.in: %${SFX}
+	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@
+
 include ${MK}/scripts.mk
 
 _installafter_: realinstall
-
-_installafter_net.lo: realinstall
-	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO}

init.d/Makefile.FreeBSD

@@ -1,13 +0,0 @@
-NET_LO=	net.lo0
-
-# Generic BSD scripts
-SRCS+=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-	rpcbind.in savecore.in syslogd.in
-
-# These are FreeBSD specific
-SRCS+=	adjkerntz.in devd.in dumpon.in ipfw.in mixer.in nscd.in \
-	powerd.in syscons.in
-
-.SUFFIXES:	.BSD.in
-.BSD.in:
-	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/Makefile.Linux

@@ -1,9 +0,0 @@
-NET_LO=	net.lo
-
-SRCS+=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in killprocs.in \
-	modules.in mount-ro.in mtab.in numlock.in procfs.in sysfs.in \
-	termencoding.in
-
-.SUFFIXES:	.Linux.in
-.Linux.in:
-	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/Makefile.NetBSD

@@ -1,12 +0,0 @@
-NET_LO=	net.lo0
-
-# Generic BSD scripts
-SRCS+=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-	rpcbind.in savecore.in syslogd.in
-
-# These are NetBSD specific
-SRCS+=	devdb.in swap-blk.in ttys.in wscons.in
-
-.SUFFIXES:	.BSD.in
-.BSD.in:
-	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/adjkerntz.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 extra_commands="save"
 

init.d/bootmisc.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 depend()
 {
@@ -10,12 +10,8 @@ depend()
 	keyword -prefix -timeout
 }
 
-dir_writeable()
-{
-	mkdir "$1"/.test.$$ 2>/dev/null && rmdir "$1"/.test.$$
-}
-
 : ${wipe_tmp:=${WIPE_TMP:-yes}}
+: ${log_dmesg:=${LOG_DMESG:-yes}}
 
 cleanup_tmp_dir()
 {
@@ -24,16 +20,16 @@ cleanup_tmp_dir()
 	if ! [ -d "$dir" ]; then
 		mkdir -p "$dir" || return $?
 	fi
-	dir_writeable "$dir" || return 1
+	checkpath -W "$dir" || return 1
 	chmod a+rwt "$dir" 2> /dev/null
 	cd "$dir" || return 1
 	if yesno $wipe_tmp; then
 		ebegin "Wiping $dir directory"
 
 		# Faster than raw find
-		if ! rm -rf -- [^ajlq\.]* 2>/dev/null ; then
+		if ! rm -rf -- [!ajlq\.]* 2>/dev/null ; then
 			# Blah, too many files
-			find . -maxdepth 1 -name '[^ajlq\.]*' -exec rm -rf -- {} +
+			find . -maxdepth 1 -name '[!ajlq\.]*' -exec rm -rf -- {} +
 		fi
 
 		# pam_mktemp creates a .private directory within which
@@ -63,6 +59,34 @@ cleanup_tmp_dir()
 	fi
 }
 
+cleanup_var_run_dir()
+{
+	ebegin "Cleaning /var/run"
+	for x in $(find /var/run ! -type d ! -name utmp \
+		! -name random-seed ! -name dev.db \
+		! -name ld-elf.so.hints ! -name ld.so.hints);
+	do
+		# Clean stale sockets
+		if [ -S "$x" ]; then
+			if type fuser >/dev/null 2>&1; then
+				fuser "$x" >/dev/null 2>&1 || rm -- "$x"
+			else
+				rm -- "$x"
+			fi
+		fi
+		[ ! -f "$x" ] && continue
+		# Do not remove pidfiles of already running daemons
+		case "$x" in
+			*.pid)
+				start-stop-daemon --test --quiet \
+				--stop --pidfile "$x" && continue
+			;;
+		esac
+		rm -f -- "$x"
+	done
+	eend 0
+}
+
 mkutmp()
 {
 	: >"$1"
@@ -71,6 +95,37 @@ mkutmp()
 	chmod 0664 "$1"
 }
 
+migrate_to_run()
+{
+	src="$1"
+	dst="$2"
+ 	if [ -L $src -a "$(readlink -f $src)" != $dst ]; then
+ 		ewarn "$src does not point to $dst."
+ 		ewarn "Setting $src to point to $dst."
+ 		rm $src
+ 	elif [ ! -L $src -a -d $src ]; then
+ 		ebegin "Migrating $src to $dst"
+ 		cp -a $src/* $dst/
+ 		rm -rf $src
+ 		eend $?
+ 	fi
+ 	# If $src doesn't exist at all, just run this
+ 	if [ ! -e $src ]; then
+ 		ln -s $dst $src
+ 	fi
+}
+
+clean_run()
+{
+	[ "$RC_SYS" = VSERVER ] && return 0
+	local dir
+	dir=$(mktemp -d)
+	mount --bind / $dir
+	rm -rf $dir/run/*
+	umount $dir
+	rm -rf $dir
+}
+
 start()
 {
 	# Remove any added console dirs
@@ -78,8 +133,16 @@ start()
 
 	local logw=false runw=false extra=
 	# Ensure that our basic dirs exist
-	[ "$RC_UNAME" = Linux ] && extra=/var/lib/misc # Satisfy Linux FHS
-	for x in /var/log /var/run /tmp $extra; do
+	if [ "$RC_UNAME" = Linux ]; then
+		# Satisfy Linux FHS
+		extra=/var/lib/misc
+		if [ ! -d /run ]; then
+			extra="/var/run $extra"
+		fi
+	else
+		extra=/var/run
+	fi
+	for x in /var/log /tmp $extra; do
 		if ! [ -d $x ]; then
 			if ! mkdir -p $x; then
 				eend 1 "failed to create needed directory $x"
@@ -88,7 +151,13 @@ start()
 		fi
 	done
 
-	if dir_writeable /var/run; then
+	if [ "$RC_UNAME" = Linux -a -d /run ]; then
+		migrate_to_run	/var/lock /run/lock
+		migrate_to_run	/var/run /run
+		clean_run
+	fi
+
+	if checkpath -W /var/run; then
 		ebegin "Creating user login records"
 		local xtra=
 		[ "$RC_UNAME" = NetBSD ] && xtra=x
@@ -98,39 +167,16 @@ start()
 		[ -e /var/log/wtmp ] || mkutmp /var/log/wtmp
 		eend 0
 
-		ebegin "Cleaning /var/run"
-		for x in $(find /var/run ! -type d ! -name utmp \
-			! -name random-seed ! -name dev.db \
-			! -name ld-elf.so.hints ! -name ld.so.hints);
-		do
-			# Clean stale sockets
-			if [ -S "$x" ]; then
-				if type fuser >/dev/null 2>&1; then
-					fuser "$x" >/dev/null 2>&1 || rm -- "$x"
-				else
-					rm -- "$x"
-				fi
-			fi
-			[ ! -f "$x" ] && continue
-			# Do not remove pidfiles of already running daemons
-			case "$x" in
-				*.pid)
-					start-stop-daemon --test --quiet \
-					--stop --pidfile "$x" && continue
-				;;
-			esac
-			rm -f -- "$x"
-		done
-		eend 0
+		mountinfo -q -f tmpfs /var/run || cleanup_var_run_dir
 	fi
 
 	# Clean up /tmp directories
 	local tmp=
 	for tmp in ${clean_tmp_dirs:-${wipe_tmp_dirs-/tmp}}; do
-		cleanup_tmp_dir "$tmp"
+		mountinfo -q -f tmpfs "$tmp" || cleanup_tmp_dir "$tmp"
 	done
 
-	if dir_writeable /tmp; then
+	if checkpath -W /tmp; then
 		# Make sure our X11 stuff have the correct permissions
 		# Omit the chown as bootmisc is run before network is up
 		# and users may be using lame LDAP auth #139411
@@ -142,15 +188,16 @@ start()
 		fi
 	fi
 
-	if $logw || dir_writeable /var/log; then
-		# Create an 'after-boot' dmesg log
-		if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ ]; then
-			dmesg > /var/log/dmesg
-			chmod 640 /var/log/dmesg
+	if yesno $log_dmesg; then
+		if $logw || checkpath -W /var/log; then
+			# Create an 'after-boot' dmesg log
+			if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ -a "$RC_SYS" != LXC ]; then
+				dmesg > /var/log/dmesg
+				chmod 640 /var/log/dmesg
+			fi
 		fi
 	fi
 
-	[ -w /etc/nologin ] && rm -f /etc/nologin
 	return 0
 }
 
@@ -166,3 +213,5 @@ stop()
 
 	return 0
 }
+
+# vim: ft=sh

init.d/consolefont.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Sets a font for the consoles."
 
@@ -49,18 +49,14 @@ start()
 			retval=1
 			break
 		fi
-		x=$(($x + 1))
+		: $(( x += 1 ))
 	done
 	eend $retval
 
-	# Store the last font so we can use it ASAP on boot
-	if [ $retval -eq 0 -a -w "$RC_LIBEXECDIR" ]; then
+	# Store the font so we can use it ASAP on boot
+	if [ $retval -eq 0 ] && checkpath -W "$RC_LIBEXECDIR"; then
 		mkdir -p "$RC_LIBEXECDIR"/console
-		for font in /usr/share/consolefonts/"$consolefont".*; do
-			:
-		done
-		cp "$font" "$RC_LIBEXECDIR"/console
-		echo "${font##*/}" >"$RC_LIBEXECDIR"/console/font
+		setfont -O "$RC_LIBEXECDIR"/console/font
 	fi
 
 	return $retval

init.d/devd.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 command=/sbin/devd
 command_args=$devd_args

init.d/devdb.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Creates the dev database"
 
@@ -11,7 +11,7 @@ depend()
 
 start()
 {
-	ebegin "Bulding the dev database"
+	ebegin "Building the dev database"
 	if [ /var/run/dev.db -nt /dev ]; then
 		:
 	else

init.d/devfs.in

@@ -1,17 +1,19 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Mount system critical filesystems in /dev."
 
 depend() {
-	use dev
-	keyword -prefix -vserver
+	use dev-mount
+	before dev
+	keyword -prefix -vserver -lxc
 }
 
 start() {
 	# Mount required stuff as user may not have then in /etc/fstab
 	for x in \
+		"mqueue /dev/mqueue 1777 ,nodev mqueue" \
 		"devpts /dev/pts 0755 ,gid=5,mode=0620 devpts" \
 		"tmpfs /dev/shm 1777 ,nodev shm" \
 	; do

init.d/dmesg.in

@@ -1,13 +1,13 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Set the dmesg level for a cleaner boot"
 
 depend()
 {
 	before dev modules
-	keyword -vserver
+	keyword -lxc -prefix -vserver
 }
 
 start()

init.d/dumpon.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Configures a specific kernel dump device."
 
@@ -19,7 +19,7 @@ start() {
 }
 
 stop() {
-	ebegin "Deactiving kernel core dump device"
+	ebegin "Deactivating kernel core dump device"
 	dumpon off
 	eend $?
 }

init.d/encswap.in

@@ -0,0 +1,43 @@
+#!@SBINDIR@/runscript
+# Copyright 1992-2012 FreeBSD Project
+# Released under the 2-clause BSD license
+
+depend() {
+	before swap
+}
+
+start() {
+	while read device mountpoint type options rest ; do
+		case ":${device}:${type}:${options}" in
+		:#*)
+			;;
+		*.bde:swap:sw)
+			passphrase=$(dd if=/dev/random count=1 2>/dev/null | md5 -q)
+			device="${device%.bde}"
+			gbde init "${device}" -P "${passphrase}" || return 1
+			gbde attach "${device}" -p "${passphrase}" || return 1
+			;;
+		*.eli:swap:sw)
+			device="${device%.eli}"
+			geli onetime ${geli_swap_flags} "${device}" || return 1
+			;;
+		esac
+	done < /etc/fstab
+}
+
+stop() {
+	while read device mountpoint type options rest ; do
+		case ":${device}:${type}:${options}" in
+		:#*)
+			;;
+		*.bde:swap:sw)
+			device="${device%.bde}"
+			gbde detach "${device}"
+			;;
+		*.eli:swap:sw)
+			# Nothing here, because geli swap devices should be
+			# created with the auto-detach-on-last-close option.
+			;;
+		esac
+	done < /etc/fstab
+}

init.d/fsck.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Check and repair filesystems according to /etc/fstab"
 _IFS="
@@ -9,7 +9,7 @@ _IFS="
 depend()
 {
 	use dev clock modules
-	keyword -jail -openvz -prefix -timeout -vserver -lxc
+	keyword -jail -openvz -prefix -timeout -vserver -lxc -uml
 }
 
 _abort() {
@@ -48,8 +48,13 @@ start()
 
 	if [ -n "$fsck_passno" ]; then
 		check_extra="[passno $fsck_passno] $check_extra"
+		if [ -n "$fsck_mnt" ]; then
+			eerror "Only 1 of fsck_passno and fsck_mnt must be set!"
+			return 1
+		fi
 	fi
 	ebegin "Checking local filesystems $check_extra"
+	# Append passno mounts
 	for p in $fsck_passno; do
 		local IFS="$_IFS"
 		case "$p" in
@@ -58,11 +63,20 @@ start()
 		set -- "$@" $(fstabinfo --passno "$p")
 		unset IFS
 	done
+	# Append custom mounts
+	for m in $fsck_mnt ; do
+		local IFS="$_IFS"
+		set -- "$@" "$m"
+		unset IFS
+	done
 
 	if [ "$RC_UNAME" = Linux ]; then
-		fsck_opts="$fsck_opts -C0 -T"
-		if [ -z "$fsck_passno" ]; then
-			fsck_args=${fsck_args--A -p}
+		local skiptypes
+		skiptypes=$(printf 'no%s,' ${net_fs_list} ${extra_net_fs_list})
+		[ "${skiptypes}" = "no," ] && skiptypes=""
+		fsck_opts="$fsck_opts -C0 -T -t ${skiptypes}noopts=_netdev"
+		if [ -z "$fsck_passno" -a -z "$fsck_mnt" ]; then
+			fsck_args=${fsck_args:--A -p}
 			if echo 2>/dev/null >/.test.$$; then
 				rm -f /.test.$$
 				fsck_opts="$fsck_opts -R"
@@ -71,7 +85,7 @@ start()
 	fi
 
 	trap : INT QUIT
-	fsck ${fsck_args--p} $fsck_opts "$@"
+	fsck ${fsck_args:--p} $fsck_opts "$@"
 	case $? in
 	0)	eend 0; return 0;;
 	1)	ewend 1 "Filesystems repaired"; return 0;;
@@ -91,7 +105,7 @@ start()
 			_reboot
 		fi;;
 	8)	ewend 1 "Operational error"; return 0;;
-	12)	ewend 1 "fsck interupted";;
+	12)	ewend 1 "fsck interrupted";;
 	*)	eend 2 "Filesystems couldn't be fixed";;
 	esac
 	_abort || return 1

init.d/hostid.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 extra_commands="reset"
 : ${hostid_file:=/etc/hostid}

init.d/hostname.in

@@ -1,16 +1,18 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Sets the hostname of the machine."
 
 depend() {
-	keyword -prefix
+	keyword -prefix -lxc
 }
 
 start()
 {
-	hostname=${hostname-${HOSTNAME-localhost}}
+	# HOSTNAME variable used to be defined in caps in conf.d/hostname.
+	# It is also a magic variable in bash.
+	hostname=${hostname-${HOSTNAME-localhost}} # checkbashisms: false positive
 	ebegin "Setting hostname to $hostname"
 	hostname "$hostname"
 	eend $? "Failed to set the hostname"

init.d/hwclock.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 extra_commands="save show"
 
@@ -85,7 +85,7 @@ start()
 
 	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
 		_hwclock --adjust $utc_cmd
-		retval=$(($retval + $?))
+		: $(( retval += $? ))
 	fi
 
 	# If setting UTC, don't bother to run hwclock when first booting
@@ -94,12 +94,12 @@ start()
 		"$utc_cmd" != --utc -o \
 		-n "$clock_args" ];
 	then
-		if yesno $clock_hctosys; then
+		if yesno ${clock_hctosys:-YES}; then
 			_hwclock --hctosys $utc_cmd $clock_args
 		else
 			_hwclock --systz $utc_cmd $clock_args
 		fi
-		retval=$(($retval + $?))
+		: $(( retval += $? ))
 	fi
 
 	eend $retval "Failed to set the system clock"
@@ -111,7 +111,7 @@ stop()
 {
 	# Don't tweak the hardware clock on LiveCD halt.
 	[ -n "$CDBOOT" ] && return 0
-	yesno $clock_systohc || return 0
+	yesno ${clock_systohc:-YES} || return 0
 
 	local retval=0 errstr=""
 	setupopts

init.d/ipfw.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # This is based on /etc/rc.firewall and /etc/rc.firewall6 from FreeBSD
 
@@ -8,7 +8,7 @@ ipfw_ip_in=${ipfw_ip_in-any}
 ipfw_ports_in=${ipfw_ports_in-auth ssh}
 ipfw_ports_nolog=${ipfw_ports_nolog-135-139,445 1026,1027 1433,1434}
 
-opts="panic showstatus"
+extra_commands="panic showstatus"
 
 depend() {
 	before net
@@ -59,7 +59,7 @@ start() {
 		return 1
 	fi
 
-	# Use a statefull firewall
+	# Use a stateful firewall
 	ipfw add check-state
 	ipfw add pass tcp from me to any established
 
@@ -123,7 +123,7 @@ start() {
 	ipfw add deny udp from any to any 520 in
 
 	# Noise from webbrowsing.
-	# The statefull filter is a bit agressive, and will cause some
+	# The stateful filter is a bit aggressive, and will cause some
 	# connection teardowns to be logged.
 	ipfw add deny tcp from any 80,443 to any 1024-65535 in
 

init.d/keymaps.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Applies a keymap for the consoles."
 
@@ -47,7 +47,7 @@ start()
 	n=1
 	while [ $n -le $ttyn ]; do
 		kbd_mode $kmode -C $ttydev$n
-		n=$(($n + 1))
+		: $(( n += 1 ))
 	done
 	eend 0
 
@@ -58,12 +58,12 @@ start()
 	if yesno $fix_euro; then
 		ebegin "Fixing font for euro symbol"
 		# Fix some fonts displaying the Euro, #173528.
-		echo "altgr keycode 18 = U+20AC" | loadkeys -q
+		echo "altgr keycode 18 = U+20AC" | loadkeys -q -
 		eend $?
 	fi
 
 	# Save the keymapping for use immediately at boot
-	if [ -w "$RC_LIBEXECDIR" ]; then
+	if checkpath -W "$RC_LIBEXECDIR"; then
 		mkdir -p "$RC_LIBEXECDIR"/console
 		dumpkeys >"$RC_LIBEXECDIR"/console/keymap
 	fi

init.d/killprocs.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Kill all processes so we can unmount disks cleanly."
 
@@ -12,11 +12,11 @@ depend()
 start()
 {
 	ebegin "Terminating remaining processes"
-	killall5 -15
+	killall5 -15 ${killall5_opts}
 	sleep 1
 	eend 0
 	ebegin "Killing remaining processes"
-	killall5 -9
+	killall5 -9 ${killall5_opts}
 	sleep 1
 	eend 0
 }

init.d/local.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Executes user programs in @SYSCONFDIR@/local.d"
 
@@ -27,7 +27,7 @@ start()
 		local_start
 	fi
 
-	return 0
+	eend 0
 }
 
 stop()
@@ -47,5 +47,5 @@ stop()
 		local_stop
 	fi
 
-	return 0
+	eend 0
 }

init.d/localmount.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Mounts disks and swap according to /etc/fstab."
 
@@ -9,19 +9,22 @@ depend()
 	need fsck
 	use lvm modules mtab
 	after lvm modules
-	keyword -jail -openvz -prefix -vserver -lxc
+	keyword -jail -prefix -vserver -lxc
 }
 
 start()
 {
 	# Mount local filesystems in /etc/fstab.
 	local types="noproc" x= no_netdev=
-	for x in $net_fs_list; do
-		types="${types},${x}"
+	for x in $net_fs_list $extra_net_fs_list; do
+		types="${types},no${x}"
 	done
 
 	if [ "$RC_UNAME" = Linux ]; then
 		no_netdev="-O no_netdev"
+		if mountinfo -q /usr; then
+			touch "$RC_SVCDIR"/usr_premounted
+		fi
 	fi
 	ebegin "Mounting local filesystems"
 	mount -at "$types" $no_netdev
@@ -33,23 +36,25 @@ start()
 
 stop()
 {
+	yesno $RC_GOINGDOWN || return 0
 	# We never unmount / or /dev or $RC_SVCDIR
-	local x= no_umounts_r="/|/dev|/dev/.*|${RC_SVCDIR}"
-	no_umounts_r="${no_umounts_r}|/bin|/sbin|/lib|/libexec"
+
+	# Bug 381783
+	local rc_svcdir=$(printf '%s\n' "$RC_SVCDIR" | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
+
+	local x= no_umounts_r="/|/dev|/dev/.*|${rc_svcdir}"
+	no_umounts_r="${no_umounts_r}|/bin|/sbin|/lib(32|64)?|/libexec"
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
-	OIFS=$IFS SIFS=${IFS-y}
-	IFS=$IFS:
+	local IFS="$IFS:"
 	for x in $no_umounts $RC_NO_UMOUNTS; do
 		no_umounts_r="$no_umounts_r|$x"
 	done
-	if [ "$SIFS" = y ]; then
-		IFS=$OIFS
-	else
-		unset IFS
-	fi
 
 	if [ "$RC_UNAME" = Linux ]; then
-		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/sys|/sys/.*"
+		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*"
+		if [ -e "$rc_svcdir"/usr_premounted ]; then
+			no_umounts_r="$no_umounts_r|/usr"
+		fi
 	fi
 	no_umounts_r="^($no_umounts_r)$"
 
@@ -70,12 +75,12 @@ stop()
 	einfo "Unmounting filesystems"
 	eindent
 	local fs=
-	for x in $net_fs_list; do
+	for x in $net_fs_list $extra_net_fs_list; do
 		fs="$fs${fs:+|}$x"
 	done
 	[ -n "$fs" ] && fs="^($fs)$"
 	do_unmount umount --skip-point-regex "$no_umounts_r" \
-		${fs:+--skip-fstype-regex} $fs --nonetdev
+		"${fs:+--skip-fstype-regex}" $fs --nonetdev
 	eoutdent
 
 	return 0

init.d/loopback.in

@@ -0,0 +1,35 @@
+#!@SBINDIR@/runscript
+# Copyright (c) 2013 William Hubbs <w.d.hubbs@gmail.com>
+# Released under the 2-clause BSD license.
+
+description="Configures the loopback interface."
+
+depend()
+{
+	keyword -jail -prefix -vserver
+}
+
+start()
+{
+	if [ "$RC_UNAME" = Linux ]; then
+		ebegin "Bringing up network interface lo"
+		if type ip > /dev/null 2>&1; then
+			ip addr add 127.0.0.1/8 dev lo brd + scope host
+			ip route add 127.0.0.0/8 dev lo scope host
+			ip link set lo up
+		else
+			ifconfig lo 127.0.0.1 netmask 255.0.0.0
+			route add -net 127.0.0.0 netmask 255.0.0.0 gw 127.0.0.1
+		fi
+	else
+		ebegin "Bringing up network interface lo0"
+		ifconfig lo0 127.0.0.1 netmask 255.0.0.0
+		route -q add -inet 127.0.0.0 -netmask 255.0.0.0 127.0.0.1
+	fi
+	eend $?
+}
+
+stop()
+{
+	return 0
+}

init.d/mixer.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 extra_commands="restore"
 
@@ -21,7 +21,7 @@ restore()
 			mixer -f "$mixer" \
 			$(cat "/var/db/${mixer#/dev/}-state") >/dev/null
 			veend $?
-			: $((retval += $?))
+			: $(( retval += $? ))
 		fi
 	done
 }
@@ -40,7 +40,7 @@ stop()
 		vebegin "$mixer"
 		mixer -f "$mixer" -s >/var/db/"${mixer#/dev/}"-state
 		veend $?
-		: $((retval += $?))
+		: $(( retval += $? ))
 	done
 	eoutdent
 	eend $retval

init.d/modules.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Loads a user defined list of kernel modules."
 
@@ -16,18 +16,21 @@ start()
 	# support compiled in ...
 	[ ! -f /proc/modules ] && return 0
 
-	local KV=$(uname -r)
-	local KV_MAJOR=${KV%%.*}
-	local x=${KV#*.}
-	local KV_MINOR=${x%%.*}
-	x=${KV#*.*.}
-	local KV_MICRO=${x%%-*}
+	local KV x y kv_variant_list
+	KV=$(uname -r)
+	# full $KV
+	kv_variant_list="${KV}"
+	# remove any KV_EXTRA options to just get the full version
+	x=${KV%%-*}
+	# now slowly strip them
+	while [ -n "$x" ] && [ "$x" != "$y" ]; do
+		kv_variant_list="${kv_variant_list} $x"
+		y=$x
+		x=${x%.*}
+	done
 
 	local list= x= xx= y= args= mpargs= cnt=0 a=
-	for x in "$KV" \
-		$KV_MAJOR.$KV_MINOR.$KV_MICRO \
-		$KV_MAJOR.$KV_MINOR \
-	; do
+	for x in $kv_variant_list ; do
 		eval list=\$modules_$(shell_var "$x")
 		[ -n "$list" ] && break
 	done
@@ -45,10 +48,7 @@ start()
 		fi
 		aa=$(shell_var "$a")
 		xx=$(shell_var "$x")
-		for y in "$KV" \
-			$KV_MAJOR.$KV_MINOR.$KV_MICRO \
-			$KV_MAJOR.$KV_MINOR \
-		; do
+		for y in $kv_variant_list ; do
 			eval args=\$module_${aa}_args_$(shell_var "$y")
 			[ -n "${args}" ] && break
 			eval args=\$module_${xx}_args_$(shell_var "$y")
@@ -57,7 +57,7 @@ start()
 		[ -z "$args" ] && eval args=\$module_${aa}_args
 		[ -z "$args" ] && eval args=\$module_${xx}_args
 		eval modprobe -q "$mpargs" "$x" "$args"
-		eend $? "Failed to load $x" && cnt=$(($cnt + 1))
+		eend $? "Failed to load $x" && : $(( cnt += 1 ))
 	done
 	einfo "Autoloaded $cnt module(s)"
 }

init.d/mount-ro.in

@@ -1,17 +1,19 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Re-mount filesytems read-only for a clean reboot."
 
 depend()
 {
 	need killprocs savecache
-	keyword -prefix -openvz -vserver -lxc
+	keyword -openvz -prefix -vserver -lxc
 }
 
 start()
 {
+	local ret=0
+
 	# Flush all pending disk writes now
 	sync; sync
 
@@ -19,28 +21,29 @@ start()
 	# We need the do_unmount function
 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 	eindent
-	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|${RC_SVCDIR}" x= fs=
-	m="$m|/bin|/sbin|/lib|/libexec"
+
+	# Bug 381783
+	local rc_svcdir=$(echo $RC_SVCDIR | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
+
+	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|/run|${rc_svcdir}" x= fs=
+	m="$m|/bin|/sbin|/lib(32|64)?|/libexec"
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
-	local OIFS=$IFS SIFS=${IFS-y} IFS=$IFS
-	IFS=$IFS:
+	local IFS="$IFS:"
 	for x in $no_umounts $RC_NO_UMOUNTS; do
 		m="$m|$x"
 	done
-	if [ "$SIFS" = y ]; then
-		IFS=$OIFS
-	else
-		unset IFS
-	fi
 	m="^($m)$"
 	fs=
-	for x in $net_fs_list; do
+	for x in $net_fs_list $extra_net_fs_list; do
 		fs="$fs${fs:+|}$x"
 	done
 	[ -n "$fs" ] && fs="^($fs)$"
 	do_unmount "umount -r" \
 		--skip-point-regex "$m" \
-		${fs:+--skip-fstype-regex} $fs --nonetdev
+		"${fs:+--skip-fstype-regex}" $fs --nonetdev
+	ret=$?
+
 	eoutdent
-	eend $?
+
+	eend $ret
 }

init.d/moused.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 mouse=${RC_SVCNAME##*.}
 if [ -n "$mouse" -a "$mouse" != "moused" ]; then
@@ -54,7 +54,7 @@ start()
 		local ttyv=
 		for ttyv in /dev/ttyv*; do
 			vidcontrol < "$ttyv" -m on
-			: $((retval+= $?))
+			: $(( retval += $? ))
 		done
 	fi
 

init.d/mtab.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 description="Update /etc/mtab to match what the kernel knows about"
 
@@ -12,9 +12,9 @@ depend()
 
 start()
 {
-	# /etc/mtab could be a symlink to /proc/mounts
-	if [ ! -w /etc/mtab -a -L /etc/mtab ]; then
-		eeinfo "Skipping mtab update (non writeable symlink)"
+	if [ -L /etc/mtab ]
+	then
+		einfo "Skipping mtab update (mtab is a symbolic link)"
 		return 0
 	fi
 
@@ -28,7 +28,7 @@ start()
 	# makes / readonly and dismounts all tmpfs even if in use which is
 	# not good. Luckily, umount uses /etc/mtab instead of /proc/mounts
 	# which allows this hack to work.
-	grep -v "^[^ ]* / tmpfs " /proc/mounts > /etc/mtab
+	grep -v "^[! ]* / tmpfs " /proc/mounts > /etc/mtab
 
 	# Remove stale backups
 	rm -f /etc/mtab~ /etc/mtab~~

init.d/net.lo.in

@@ -1,723 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-MODULESDIR="${RC_LIBEXECDIR}/net"
-MODULESLIST="${RC_SVCDIR}/nettree"
-_config_vars="config routes"
-
-[ -z "${IN_BACKGROUND}" ] && IN_BACKGROUND="NO"
-
-description="Configures network interfaces."
-
-# Handy var so we don't have to embed new lines everywhere for array splitting
-__IFS="
-"
-depend()
-{
-	local IFACE=${RC_SVCNAME#*.}
-	local IFVAR=$(shell_var "${IFACE}")
-
-	provide net
-	keyword -jail -prefix -vserver
-
-	case "${IFACE}" in
-		lo|lo0) before mtab ; need root ;;
-		*) after bootmisc net.lo net.lo0 ; need localmount ;;
-	esac
-
-	if [ "$(command -v "depend_${IFVAR}")" = "depend_${IFVAR}" ]; then
-		depend_${IFVAR}
-	fi
-
-	local dep= prov=
-	for dep in need use before after provide keyword; do
-		eval prov=\$rc_${dep}_${IFVAR}
-		if [ -n "${prov}" ]; then
-			${dep} ${prov}
-		fi
-	done
-}
-
-# Support bash arrays - sigh
-_get_array()
-{
-	local _a=
-	if [ -n "${BASH}" ]; then
-		case "$(declare -p "$1" 2>/dev/null)" in
-			"declare -a "*)
-				eval "set -- \"\${$1[@]}\""
-				for _a; do
-					printf "%s\n" "${_a}"
-				done
-				return 0
-				;;
-		esac
-	fi
-
-	eval _a=\$$1
-	printf "%s" "${_a}"
-	printf "\n"
-	[ -n "${_a}" ]
-}
-
-# Flatten bash arrays to simple strings
-_flatten_array()
-{
-	if [ -n "${BASH}" ]; then
-		case "$(declare -p "$1" 2>/dev/null)" in
-			"declare -a "*)
-				eval "set -- \"\${$1[@]}\""
-				for x; do
-					printf "'%s' " "$(printf "$x" | sed "s:':'\\\'':g")"
-				done
-				return 0
-				;;
-		esac
-	fi
-
-	eval _a=\$$1
-	printf "%s" "${_a}"
-	printf "\n"
-	[ -n "${_a}" ]
-}
-
-_wait_for_carrier()
-{
-	local timeout= efunc=einfon
-
-	_has_carrier  && return 0
-
-	eval timeout=\$carrier_timeout_${IFVAR}
-	timeout=${timeout:-${carrier_timeout:-5}}
-
-	# Incase users don't want this nice feature ...
-	[ ${timeout} -le 0 ] && return 0
-
-	yesno ${RC_PARALLEL} && efunc=einfo
-	${efunc} "Waiting for carrier (${timeout} seconds) "
-	while [ ${timeout} -gt 0 ]; do
-		sleep 1
-		if _has_carrier; then
-			[ "${efunc}" = "einfon" ] && echo
-			eend 0
-			return 0
-		fi
-		timeout=$((${timeout} - 1))
-		[ "${efunc}" = "einfon" ] && printf "."
-	done
-
-	[ "${efunc}" = "einfon" ] && echo
-	eend 1
-	return 1
-}
-
-_netmask2cidr()
-{
-	# Some shells cannot handle hex arithmetic, so we massage it slightly
-	# Buggy shells include FreeBSD sh, dash and busybox.
-	# bash and NetBSD sh don't need this.
-	case $1 in
-		0x*)
-		local hex=${1#0x*} quad=
-		while [ -n "${hex}" ]; do
-			local lastbut2=${hex#??*}
-			quad=${quad}${quad:+.}0x${hex%${lastbut2}*}
-			hex=${lastbut2}
-		done
-		set -- ${quad}
-		;;
-	esac
-
-	local i= len=
-	local IFS=.
-	for i in $1; do
-		while [ ${i} != "0" ]; do
-			len=$((${len} + ${i} % 2))
-			i=$((${i} >> 1))
-		done
-	done
-
-	echo "${len}"
-}
-
-_configure_variables()
-{
-	local var= v= t=
-
-	for var in ${_config_vars}; do
-		local v=
-		for t; do
-			eval v=\$${var}_${t}
-			if [ -n "${v}" ]; then
-				eval ${var}_${IFVAR}=\$${var}_${t}
-				continue 2
-			fi
-		done
-	done
-}
-
-_show_address()
-{
-	einfo "received address $(_get_inet_address "${IFACE}")"
-}
-
-# Basically sorts our modules into order and saves the list
-_gen_module_list()
-{
-	local x= f= force=$1
-	if ! ${force} && [ -s "${MODULESLIST}" -a "${MODULESLIST}" -nt "${MODULESDIR}" ]; then
-		local update=false
-		for x in "${MODULESDIR}"/*.sh; do
-			[ -e "${x}" ] || continue
-			if [ "${x}" -nt "${MODULESLIST}" ]; then
-				update=true
-				break
-			fi
-		done
-		${update} || return 0
-	fi
-
-	einfo "Caching network module dependencies"
-	# Run in a subshell to protect the main script
-	(
-	after() {
-		eval ${MODULE}_after="\"\${${MODULE}_after}\${${MODULE}_after:+ }$*\""
-	}
-
-	before() {
-		local mod=${MODULE}
-		local MODULE=
-		for MODULE; do
-			after "${mod}"
-		done
-	}
-
-	program() {
-		if [ "$1" = "start" -o "$1" = "stop" ]; then
-			local s="$1"
-			shift
-			eval ${MODULE}_program_${s}="\"\${${MODULE}_program_${s}}\${${MODULE}_program_${s}:+ }$*\""
-		else
-			eval ${MODULE}_program="\"\${${MODULE}_program}\${${MODULE}_program:+ }$*\""
-		fi
-	}
-
-	provide() {
-		eval ${MODULE}_provide="\"\${${MODULE}_provide}\${${MODULE}_provide:+ }$*\""
-		local x
-		for x in $*; do
-			eval ${x}_providedby="\"\${${MODULE}_providedby}\${${MODULE}_providedby:+ }${MODULE}\""
-		done
-	}
-
-	for MODULE in "${MODULESDIR}"/*.sh; do
-		sh -n "${MODULE}" || continue
-		. "${MODULE}" || continue
-		MODULE=${MODULE#${MODULESDIR}/}
-		MODULE=${MODULE%.sh}
-		eval ${MODULE}_depend
-		MODULES="${MODULES} ${MODULE}"
-	done
-
-	VISITED=
-	SORTED=
-	visit() {
-		case " ${VISITED} " in
-			*" $1 "*) return;;
-		esac
-		VISITED="${VISITED} $1"
-
-		eval AFTER=\$${1}_after
-		for MODULE in ${AFTER}; do
-			eval PROVIDEDBY=\$${MODULE}_providedby
-			if [ -n "${PROVIDEDBY}" ]; then
-				for MODULE in ${PROVIDEDBY}; do
-					visit "${MODULE}"
-				done
-			else
-				visit "${MODULE}"
-			fi
-		done
-
-		eval PROVIDE=\$${1}_provide
-		for MODULE in ${PROVIDE}; do
-			visit "${MODULE}"
-		done
-
-		eval PROVIDEDBY=\$${1}_providedby
-		[ -z "${PROVIDEDBY}" ] && SORTED="${SORTED} $1"
-	}
-
-	for MODULE in ${MODULES}; do
-		visit "${MODULE}"
-	done
-
-	printf "" > "${MODULESLIST}"
-	i=0
-	for MODULE in ${SORTED}; do
-		eval PROGRAM=\$${MODULE}_program
-		eval PROGRAM_START=\$${MODULE}_program_start
-		eval PROGRAM_STOP=\$${MODULE}_program_stop
-		eval PROVIDE=\$${MODULE}_provide
-		echo "module_${i}='${MODULE}'" >> "${MODULESLIST}"
-		echo "module_${i}_program='${PROGRAM}'" >> "${MODULESLIST}"
-		echo "module_${i}_program_start='${PROGRAM_START}'" >> "${MODULESLIST}"
-		echo "module_${i}_program_stop='${PROGRAM_STOP}'" >> "${MODULESLIST}"
-		echo "module_${i}_provide='${PROVIDE}'" >> "${MODULESLIST}"
-		i=$((${i} + 1))
-	done
-	echo "module_${i}=" >> "${MODULESLIST}"
-	)
-
-	return 0
-}
-
-_load_modules()
-{
-	local starting=$1 mymods=
-
-	# Ensure our list is up to date
-	_gen_module_list false
-	if ! . "${MODULESLIST}"; then
-		_gen_module_list true
-		. "${MODULESLIST}"
-	fi
-
-	MODULES=
-	if [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
-		eval mymods=\$modules_${IFVAR}
-		[ -z "${mymods}" ] && mymods=${modules}
-	fi
-
-	local i=-1 x= mod= f= provides=
-	while true; do
-		i=$((${i} + 1))
-		eval mod=\$module_${i}
-		[ -z "${mod}" ] && break
-		[ -e "${MODULESDIR}/${mod}.sh" ] || continue
-
-		eval set -- \$module_${i}_program
-		if [ -n "$1" ]; then
-			x=
-			for x; do
-				[ -x "${x}" ] && break
-			done
-			[ -x "${x}" ] || continue
-		fi
-		if ${starting}; then
-			eval set -- \$module_${i}_program_start
-		else
-			eval set -- \$module_${i}_program_stop
-		fi
-		if [ -n "$1" ]; then
-			x=
-			for x; do
-				case "${x}" in
-					/*) [ -x "${x}" ] && break;;
-					*) type "${x}" >/dev/null 2>&1 && break;;
-				esac
-				unset x
-			done
-			[ -n "${x}" ] || continue
-		fi
-
-		eval provides=\$module_${i}_provide
-		if ${starting}; then
-			case " ${mymods} " in
-				*" !${mod} "*) continue;;
-				*" !${provides} "*) [ -n "${provides}" ] && continue;;
-			esac
-		fi
-		MODULES="${MODULES}${MODULES:+ }${mod}"
-
-		# Now load and wrap our functions
-		if ! . "${MODULESDIR}/${mod}.sh"; then
-			eend 1 "${RC_SVCNAME}: error loading module \`${mod}'"
-			exit 1
-		fi
-
-		[ -z "${provides}" ] && continue
-
-		# Wrap our provides
-		local f=
-		for f in pre_start start post_start; do
-			eval "${provides}_${f}() { [ "$(command -v "${mod}_${f}")" = "${mod}_${f}" ] || return 0; ${mod}_${f} \"\$@\"; }"
-		done
-
-		eval module_${mod}_provides="${provides}"
-		eval module_${provides}_providedby="${mod}"
-	done
-
-	# Wrap our preferred modules
-	for mod in ${mymods}; do
-		case " ${MODULES} " in
-			*" ${mod} "*)
-			eval x=\$module_${mod}_provides
-			[ -z "${x}" ] && continue
-			for f in pre_start start post_start; do
-				eval "${x}_${f}() { [ "$(command -v "${mod}_${f}")" = "${mod}_${f}" ] || return 0; ${mod}_${f} \"\$@\"; }"
-			done
-			eval module_${x}_providedby="${mod}"
-			;;
-		esac
-	done
-
-	# Finally remove any duplicated provides from our list if we're starting
-	# Otherwise reverse the list
-	local LIST="${MODULES}" p=
-	MODULES=
-	if ${starting}; then
-		for mod in ${LIST}; do
-			eval x=\$module_${mod}_provides
-			if [ -n "${x}" ]; then
-				eval p=\$module_${x}_providedby
-				[ "${mod}" != "${p}" ] && continue
-			fi
-			MODULES="${MODULES}${MODULES:+ }${mod}"
-		done
-	else
-		for mod in ${LIST}; do
-			MODULES="${mod}${MODULES:+ }${MODULES}"
-		done
-	fi
-
-	veinfo "Loaded modules: ${MODULES}"
-}
-
-_load_config()
-{
-	local config="$(_get_array "config_${IFVAR}")"
-	local fallback="$(_get_array fallback_${IFVAR})"
-
-	config_index=0
-	local IFS="$__IFS"
-	set -- ${config}
-
-	# We should support a space separated array for cidr configs
-	if [ $# = 1 ]; then
-		unset IFS
-		set -- ${config}
-		# Of course, we may have a single address added old style.
-		case "$2" in
-			netmask|broadcast|brd|brd+|peer|pointopoint)
-				local IFS="$__IFS"
-				set -- ${config}
-				;;
-		esac
-	fi
-
-	# Ensure that loopback has the correct address
-	if [ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ]; then
-		if [ "$1" != "null" ]; then
-		   	config_0="127.0.0.1/8"
-			config_index=1
-		fi
-	else
-		if [ -z "$1" ]; then
-			ewarn "No configuration specified; defaulting to DHCP"
-			config_0="dhcp"
-			config_index=1
-		fi
-	fi
-
-
-	# We store our config in an array like vars
-	# so modules can influence it
-	for cmd; do
-		eval config_${config_index}="'${cmd}'"
-		config_index=$((${config_index} + 1))
-	done
-	# Terminate the list
-	eval config_${config_index}=
-
-	config_index=0
-	for cmd in ${fallback}; do
-		eval fallback_${config_index}="'${cmd}'"
-		config_index=$((${config_index} + 1))
-	done
-	# Terminate the list
-	eval fallback_${config_index}=
-
-	# Don't set to zero, so any net modules don't have to do anything extra
-	config_index=-1
-}
-
-# Support functions
-_run_if()
-{
-	local cmd=$1 iface=$2 ifr=${IFACE} ifv=${IFVAR}
-	# Ensure that we don't stamp on real values
-	local IFACE= IFVAR=
-	shift
-	if [ -n "${iface}" ]; then
-		IFACE="${iface}"
-		[ "${iface}" != "${ifr}" ] && IFVAR=$(shell_var "${IFACE}")
-	else
-		IFACE=${ifr}
-		IFVAR=${ifv}
-	fi
-	${cmd}
-}
-interface_exists()
-{
-	_run_if _exists "$@"
-}
-interface_up()
-{
-	_run_if _up "$@"
-}
-interface_down()
-{
-	_run_if _down "$@"
-}
-
-start()
-{
-	local IFACE=${RC_SVCNAME#*.} oneworked=false fallback=false module=
-	local IFVAR=$(shell_var "${IFACE}") cmd= our_metric=
-	local metric=0
-
-	einfo "Bringing up interface ${IFACE}"
-	eindent
-
-	if [ -z "${MODULES}" ]; then
-		local MODULES=
-		_load_modules true
-	fi
-
-	# We up the iface twice if we have a preup to ensure it's up if
-	# available in preup and afterwards incase the user inadvertently
-	# brings it down
-	if [ "$(command -v preup)" = "preup" ]; then
-		_up 2>/dev/null
-		ebegin "Running preup"
-		eindent
-		preup || return 1
-		eoutdent
-	fi
-
-	_up 2>/dev/null
-
-	for module in ${MODULES}; do
-		if [ "$(command -v "${module}_pre_start")" = "${module}_pre_start" ]; then
-			${module}_pre_start || exit $?
-		fi
-	done
-
-	if ! _exists; then
-		eerror "ERROR: interface ${IFACE} does not exist"
-		eerror "Ensure that you have loaded the correct kernel module for your hardware"
-		return 1
-	fi
-
-	if ! _wait_for_carrier; then
-		if service_started devd; then
-			ewarn "no carrier, but devd will start us when we have one"
-			mark_service_inactive "${RC_SVCNAME}"
-		else
-			eerror "no carrier"
-		fi
-		return 1
-	fi
-
-	local config= config_index=
-	_load_config
-	config_index=0
-
-	eval our_metric=\$metric_${IFVAR}
-	if [ -n "${our_metric}" ]; then
-		metric=${our_metric}
-	elif [ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
-		metric=$((${metric} + $(_ifindex)))
-	fi
-
-	while true; do
-		eval config=\$config_${config_index}
-		[ -z "${config}" ] && break
-
-		set -- ${config}
-		ebegin "$1"
-		eindent
-		case "$1" in
-			noop)
-				if [ -n "$(_get_inet_address)" ]; then
-					oneworked=true
-					break
-				fi
-				;;
-			null) :;;
-			[0-9]*|*:*) _add_address ${config};;
-			*)
-				if [ "$(command -v "${config}_start")" = "${config}_start" ]; then
-					"${config}"_start
-				else
-					eerror "nothing provides \`${config}'"
-				fi
-				;;
-		esac
-		if eend $?; then
-			oneworked=true
-		else
-			eval config=\$fallback_${config_index}
-			if [ -n "${config}" ]; then
-				fallback=true
-				eoutdent
-				ewarn "Trying fallback configuration ${config}"
-				eindent
-				eval config_${config_index}=\$config
-				unset fallback_${config_index}
-				config_index=$((${config_index} - 1))
-			fi
-		fi
-		eoutdent
-		config_index=$((${config_index} + 1))
-	done
-
-	if ! ${oneworked}; then
-		if [ "$(command -v failup)" = "failup" ]; then
-			ebegin "Running failup"
-			eindent
-			failup
-			eoutdent
-		fi
-		return 1
-	fi
-
-	local hidefirstroute=false first=true routes=
-	if ${fallback}; then
-		routes="$(_get_array "fallback_routes_${IFVAR}")"
-	fi
-	if [ -z "${routes}" ]; then
-		routes="$(_get_array "routes_${IFVAR}")"
-	fi
-	if [ "${IFACE}" = "lo" -o "${IFACE}" = "lo0" ]; then
-		if [ "${config_0}" != "null" ]; then
-			routes="127.0.0.0/8 via 127.0.0.1
-${routes}"
-			hidefirstroute=true
-		fi
-	fi
-
-	local OIFS="${IFS}" SIFS="${IFS-y}"
-	local IFS="$__IFS"
-	for cmd in ${routes}; do
-		unset IFS
-		if ${first}; then
-			first=false
-			einfo "Adding routes"
-		fi
-		eindent
-		ebegin ${cmd}
-		# Work out if we're a host or a net if not told
-		case ${cmd} in
-			-net" "*|-host" "*);;
-			*" "netmask" "*)                   cmd="-net ${cmd}";;
-			*.*.*.*/32*)                       cmd="-host ${cmd}";;
-			*.*.*.*/*|0.0.0.0|0.0.0.0" "*)     cmd="-net ${cmd}";;
-			default|default" "*)               cmd="-net ${cmd}";;
-			*)                                 cmd="-host ${cmd}";;
-		esac
-		if ${hidefirstroute}; then
-			_add_route ${cmd} >/dev/null 2>&1
-			hidefirstroute=false
-		else
-			_add_route ${cmd} >/dev/null
-		fi
-		eend $?
-		eoutdent
-	done
-	if [ "${SIFS}" = "y" ]; then
-		unset IFS
-	else
-		IFS="${OIFS}"
-	fi
-
-	for module in ${MODULES}; do
-		if [ "$(command -v "${module}_post_start")" = "${module}_post_start" ]; then
-			${module}_post_start || exit $?
-		fi
-	done
-
-	if [ "$(command -v postup)" = "postup" ]; then
-		ebegin "Running postup"
-		eindent
-		postup
-		eoutdent
-	fi
-
-	return 0
-}
-
-stop()
-{
-	local IFACE=${RC_SVCNAME#*.} module=
-	local IFVAR=$(shell_var "${IFACE}") opts=
-
-	einfo "Bringing down interface ${IFACE}"
-	eindent
-
-	if [ -z "${MODULES}" ]; then
-		local MODULES=
-		_load_modules false
-	fi
-
-	if [ "$(command -v predown)" = "predown" ]; then
-		ebegin "Running predown"
-		eindent
-		predown || return 1
-		eoutdent
-	else
-		if is_net_fs /; then
-			eerror "root filesystem is network mounted -- can't stop ${IFACE}"
-			return 1
-		fi
-	fi
-
-	for module in ${MODULES}; do
-		if [ "$(command -v "${module}_pre_stop")" = "${module}_pre_stop" ]; then
-			${module}_pre_stop || exit $?
-		fi
-	done
-
-	for module in ${MODULES}; do
-		if [ "$(command -v "${module}_stop")" = "${module}_stop" ]; then
-			${module}_stop
-		fi
-	done
-
-	# Only delete addresses for interfaces that exist
-	if _exists; then
-		# PPP can manage it's own addresses when IN_BACKGROUND
-		# Important in case "demand" set on the ppp link
-		if ! (yesno ${IN_BACKGROUND} && is_ppp) ; then
-			_delete_addresses "${IFACE}"
-		fi
-	fi
-
-	for module in ${MODULES}; do
-		if [ "$(command -v "${module}_post_stop")" = "${module}_post_stop" ]; then
-			${module}_post_stop
-		fi
-	done
-
-	# If not in background, and not loopback then bring the interface down
-	# unless overridden.
-	if ! yesno ${IN_BACKGROUND} && \
-	[ "${IFACE}" != "lo" -a "${IFACE}" != "lo0" ]; then
-		eval module=\$ifdown_${IFVAR}
-		module=${module:-${ifdown:-YES}}
-		yesno ${module} && _down 2>/dev/null
-	fi
-
-	type resolvconf >/dev/null 2>&1 && resolvconf -d "${IFACE}" 2>/dev/null
-
-	if [ "$(command -v "postdown")" = "postdown" ]; then
-		ebegin "Running postdown"
-		eindent
-		postdown
-		eoutdent
-	fi
-
-	return 0
-}

init.d/netmount.in

@@ -1,63 +1,27 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
-description="Mounts network shares according to /etc/fstab."
-
-need_portmap()
-{
-	local opts=
-	local IFS="
-"
-	set -- $(fstabinfo --options --fstype nfs,nfs4)
-	for opts; do
-		case ,$opts, in
-			*,noauto,*|*,nolock,*);;
-			*) return 0;;
-		esac
-	done
-	return 1
-}
+description="Mounts network shares, other than NFS, according to /etc/fstab."
+# We skip all NFS shares in this script because they require extra
+# daemons to be running on the client in order to work correctly.
+# It is best to allow nfs-utils to handle all nfs shares.
 
 depend()
 {
-	# Only have portmap as a dependency if there is a nfs mount in fstab
-	# that is set to mount at boot
-	local pmap=
-	if need_portmap; then
-		pmap="rpc.statd"
-		[ -x @SYSCONFDIR@/init.d/rpcbind ] \
-			&& pmap="$pmap rpcbind" \
-			|| pmap="$pmap portmap"
-	fi
-
 	config /etc/fstab
-	need net $pmap
 	use afc-client amd autofs openvpn
-	use dns nfs nfsmount portmap rpcbind rpc.statd rpc.lockd
-	keyword -jail -prefix -vserver
+	use dns
+	keyword -jail -prefix -vserver -lxc
 }
 
 start()
 {
-	local myneed= myuse= pmap="portmap" nfsmounts=
-	[ -x @SYSCONFDIR@/init.d/rpcbind ] && pmap="rpcbind"
-
 	local x= fs= rc=
-	for x in $net_fs_list; do
+	for x in $net_fs_list $extra_net_fs_list; do
 		case "$x" in
 			nfs|nfs4)
-			# If the nfsmount script took care of the nfs
-			# filesystems, then there's no point in trying
-			# them twice
-			service_started nfsmount && continue
-
-			# Only try to mount NFS filesystems if portmap was
-			# started. This is to fix "hang" problems for new
-			# users who do not add portmap to the default runlevel.
-			if need_portmap && ! service_started "$pmap"; then
-				continue
-			fi
+			continue
 			;;
 		esac
 		fs="$fs${fs:+,}$x"
@@ -81,8 +45,15 @@ stop()
 	ebegin "Unmounting network filesystems"
 	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
 
-	for x in $net_fs_list; do
-		fs="$fs${fs:+,}$x"
+	for x in $net_fs_list $extra_net_fs_list; do
+		case "$x" in
+			nfs|nfs4)
+				continue
+				;;
+			*)
+				fs="$fs${fs:+,}$x"
+				;;
+		esac
 	done
 	if [ -n "$fs" ]; then
 		umount -at $fs || eerror "Failed to simply unmount filesystems"
@@ -90,8 +61,15 @@ stop()
 
 	eindent
 	fs=
-	for x in $net_fs_list; do
-		fs="$fs${fs:+|}$x"
+	for x in $net_fs_list $extra_net_fs_list; do
+		case "$x" in
+			nfs|nfs4)
+				continue
+				;;
+			*)
+				fs="$fs${fs:+|}$x"
+				;;
+		esac
 	done
 	[ -n "$fs" ] && fs="^($fs)$"
 	do_unmount umount ${fs:+--fstype-regex} $fs --netdev

init.d/network.in

@@ -1,6 +1,6 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
+# Released under the 2-clause BSD license.
 
 # This script was inspired by the equivalent rc.d network from NetBSD.
 
@@ -12,7 +12,9 @@ depend()
 {
 	need localmount
 	after bootmisc
-	provide net
+	if [ -n "$(interfaces)" ]; then
+		provide net
+	fi
 	keyword -jail -prefix -vserver
 }
 
@@ -221,15 +223,6 @@ start()
 
 	einfo "Starting network"
 	routeflush
-	if [ "$RC_UNAME" = "Linux" ]; then
-		ifconfig lo 127.0.0.1 netmask 255.0.0.0 || cr=1
-		route add -net 127.0.0.0 netmask 255.0.0.0 \
-			gw 127.0.0.1 reject 2>/dev/null
-	else
-		ifconfig lo0 127.0.0.1 netmask 255.0.0.0 || cr=1
-		route -q add -inet 127.0.0.0 -netmask 255.0.0.0 \
-			127.0.0.1 -reject || cr=1
-	fi
 	eindent
 	for int in $(interfaces); do
 		local func= cf=
@@ -281,7 +274,7 @@ start()
 		tentative || break
 		[ $r = 5 ] && vebegin "Waiting for tentative addresses"
 		sleep 1
-		r=$(($r - 1))
+		: $(( r -= 1 ))
 	done
 	if [ $r != 5 ]; then
 		[ $r != 0 ]
@@ -321,13 +314,17 @@ stop()
 	# Don't stop the network at shutdown.
  	# We don't use the noshutdown keyword so that we are started again
 	# correctly if we go back to multiuser.
-	yesno ${shutdown_network:-YES} && yesno $RC_GOINGDOWN && return 0
+	yesno ${keep_network:-YES} && yesno $RC_GOINGDOWN && return 0
 
 	local int= intv= cmd= downcmd= r=
 	einfo "Stopping network"
 	routeflush
 	eindent
 	for int in $(reverse $(interfaces u)); do
+		case "$int" in
+			lo|lo0) continue ;;
+			*) ;;
+		esac
 		intv=$(shell_var "$int")
 		eval downcmd=\$ifdown_$intv
 		eval cmd=\$ip_$intv