Begin port to GNU/kFreeBSD

This is just a minimal port to get Debian up and running; the rest will
be done later.

Makefile.inc

@@ -1,3 +1,3 @@
 NAME=		openrc
-VERSION=	0.13
+VERSION=	0.12.4
 PKG=		${NAME}-${VERSION}

conf.d/hostname

@@ -1,2 +1,2 @@
-# Set to the fully-qualified hostname of this machine
+# Set to the hostname of this machine
 hostname="localhost"

etc/rc.conf.GNU-kFreeBSD

@@ -0,0 +1,11 @@
+##############################################################################
+# GNU/kFreeBSD SPECIFIC OPTIONS
+
+# This is the subsystem type. Valid options on GNU/kFreeBSD:
+# ""        - nothing special
+# "jail"    - FreeBSD jails (not yet implemented)
+# If this is commented out, automatic detection will be used.
+#
+# This should be set to the value representing the environment this file is
+# PRESENTLY in, not the virtualization the environment is capable of.
+#rc_sys=""

init.d/.gitignore

@@ -3,8 +3,9 @@ fsck
 hostname
 local
 localmount
-loopback
 moused
+net.lo
+net.lo0
 netmount
 network
 root
@@ -40,5 +41,4 @@ syslogd
 termencoding
 ttys
 wscons
-tmpfiles.dev
 tmpfiles.setup

init.d/bootmisc.in

@@ -117,6 +117,7 @@ migrate_to_run()
 
 clean_run()
 {
+	[ "$RC_SYS" = VSERVER ] && return 0
 	local dir
 	dir=$(mktemp -d)
 	mount --bind / $dir

init.d/fsck.in

@@ -9,7 +9,7 @@ _IFS="
 depend()
 {
 	use dev clock modules
-	keyword -jail -openvz -prefix -timeout -vserver -lxc
+	keyword -jail -openvz -prefix -timeout -vserver -lxc -uml
 }
 
 _abort() {

init.d/hostname.in

@@ -1,42 +1,18 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
 description="Sets the hostname of the machine."
 
 depend() {
-	need root
+	keyword -prefix -lxc
 }
 
 start()
 {
-	hostname=${hostname-${HOSTNAME-localhost}}
-	out=$hostname
-	short=${hostname%%.*}
-	if [ "$short" != "$hostname" ]; then
-		out="$out $short"
-	fi
-	if [ "$nisdomainname" != "" ]; then
-		ebegin "Setting NIS domain name to $nisdomainname"
-		nisdomainname $nisdomainname
-		eend $? "Failed to set the NIS domain name"
-	fi
-	if [ "$short" != "localhost" ]; then
-		out="$out localhost"
-	fi
-	if [ "$hostname" != "localhost.localdomain" ]; then
-		out="$out localhost.localdomain"
-	fi
-	[ -n "$aliases" ] && out="$out $aliases"
-	ebegin "Configuring /etc/hosts"
-	[ -e /etc/hosts ] && sed -i -e '/[[:space:]]*127.0.0.1[[:space:]]/d' -e '/[[:space:]]*::1[[:space:]]/d' /etc/hosts
-	cat <<END >> /etc/hosts
-127.0.0.1	$out
-::1		$out
-END
-	chmod 0644 /etc/hosts
-	eend $?
-	[ "$RC_SYS" = "LXC" ] && return 0
+	# HOSTNAME variable used to be defined in caps in conf.d/hostname.
+	# It is also a magic variable in bash.
+	hostname=${hostname-${HOSTNAME-localhost}} # checkbashisms: false positive
 	ebegin "Setting hostname to $hostname"
 	hostname "$hostname"
 	eend $? "Failed to set the hostname"

init.d/loopback.in

@@ -6,7 +6,7 @@ description="Configures the loopback interface."
 
 depend()
 {
-	return 0
+	keyword -jail -prefix -vserver
 }
 
 start()

init.d/netmount.in

@@ -12,7 +12,7 @@ depend()
 	config /etc/fstab
 	use afc-client amd autofs openvpn
 	use dns
-	keyword -jail -prefix -vserver
+	keyword -jail -prefix -vserver -lxc
 }
 
 start()

init.d/sysctl.Linux.in

@@ -1,11 +1,11 @@
-#!@PREFIX@/sbin/runscript
+#!@SBINDIR@/runscript
 # Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
 # Released under the 2-clause BSD license.
 
 depend()
 {
 	before bootmisc logger
-	keyword -lxc -vserver
+	keyword -lxc -prefix -vserver
 }
 
 start()
@@ -15,14 +15,6 @@ start()
 	ebegin "Configuring kernel parameters"
 	eindent
 
-	# default sysctl System V max shared memory to 1/4 of RAM:
-	mem_bytes=`awk '/MemTotal:/ { printf "%0.f",$2 * 1024}' /proc/meminfo`
-	mem_max=`expr $mem_bytes / 4` 
-	page_size=`getconf PAGE_SIZE`
-	shmall=`expr $mem_bytes / $page_size`
-	sysctl kernel.shmmax=$mem_max > /dev/null
-	sysctl kernel.shmall=$shmall > /dev/null
-
 	for conf in @SYSCONFDIR@/sysctl.conf @SYSCONFDIR@/sysctl.d/*.conf; do
 		if [ -r "$conf" ]; then
 			vebegin "applying $conf"

man/einfo.3

@@ -105,8 +105,7 @@ and
 respectively, but only work when
 .Va EINFO_VERBOSE
 is true. You can also make the
-.Fn einfo ,
-.Fn ewarn ,
+.Fn einfo
 and
 .Fn ebegin
 functions silent by setting
@@ -185,12 +184,6 @@ when set to true makes the
 and
 .Fn einfon
 family of functions quiet, so nothing is printed.
-.Va EERROR_QUIET
-when set to true makes the
-.Fn eerror
-and
-.Fn eerrorn
-family of functions quiet, so nothing is printed.
 .Pp
 .Va EINFO_VERBOSE
 when set to true makes the

man/runscript.8

@@ -60,12 +60,12 @@ First we ensure that any services that depend on us are stopped. If any
 services that need us fail to stop then we exit with a suitable error,
 otherwise call the supplied stop function if it exists.
 .It Ar restart
-Stops and starts the service, including dependencies. This cannot be
+Stop and start the service, including dependencies. This cannot be
 overridden. See the description of the RC_CMD variable below for the
 method to make your service behave differently when restart is being
 executed.
 .It Ar status
-Shows the status of the service. The return code matches the status, with the
+Show the status of the service. The return code matches the status, with the
 exception of "started" returning 0 to match standard command behaviour.
 .It Ar zap
 Resets the service state to stopped and removes all saved data about the
@@ -88,8 +88,8 @@ Output from any non OpenRC commands is not affected.
 .It Fl v , -verbose
 Turns on any extra informational output the service generates.
 .It Fl Z , -dry-run
-Shows which services would be stopped and/or started without actually stopping
-or starting them.
+Shows what services would be stopped and/or started without actually starting
+or stopping them.
 .El
 .Pp
 The following variables affect the service script:
@@ -471,7 +471,7 @@ start_pre()
 		# stop_post.
 	fi
     # Ensure that our dirs are correct
-    checkpath --directory --owner foo:foo --mode 0775 \\
+    checkpath --dir --owner foo:foo --mode 0664 \\
 	/var/run/foo /var/cache/foo
 }
 

mk/os-GNU-kFreeBSD.mk

@@ -0,0 +1,9 @@
+# Copyright (c) 2008 Roy Marples <roy@marples.name>
+# Released under the 2-clause BSD license.
+
+# Generic definitions
+
+CPPFLAGS+=	-D_BSD_SOURCE -D_XOPEN_SOURCE=700
+LIBDL=		-Wl,-Bdynamic -ldl
+LIBKVM?=
+include ${MK}/os-BSD.mk

mk/os.mk

@@ -3,7 +3,7 @@
 
 # Generic definitions
 
-_OS_SH=		uname -s
+_OS_SH=		uname -s | tr '/' '-'
 _OS:= 		$(shell ${_OS_SH})
 OS?= 		${_OS}
 include ${MK}/os-${OS}.mk

sh/rc-cgroup.sh.in

@@ -116,7 +116,7 @@ cgroup_set_limits()
 
 cgroup_cleanup()
 {
-	yesno "${rc_cgroup_cleanup:-no}" && cgroup_running || return 0
+	cgroup_running || return 0
 	ebegin "starting cgroups cleanup"
 	for sig in TERM QUIT INT; do
 		cgroup_get_pids || { eend 0 "finished" ; return 0 ; }

sh/runscript.sh.in

@@ -308,6 +308,7 @@ while [ -n "$1" ]; do
 				fi
 				[ "$(command -v cgroup_cleanup)" = "cgroup_cleanup" -a \
 				"$1" = "stop" ] && \
+				yesno "${rc_cgroup_cleanup}" && \
 					cgroup_cleanup
 				shift
 				continue 2

src/libeinfo/libeinfo.c

@@ -273,12 +273,6 @@ is_quiet(void)
 	return yesno(getenv("EINFO_QUIET"));
 }
 
-static bool
-is_really_quiet(void)
-{
-	return yesno(getenv("EERROR_QUIET"));
-}
-
 static bool
 is_verbose(void)
 {
@@ -680,8 +674,6 @@ eerrorn(const char *EINFO_RESTRICT fmt, ...)
 	int retval;
 	va_list ap;
 
-	if (!fmt || is_really_quiet())
-		return 0;
 	va_start(ap, fmt);
 	retval = _eerrorvn(fmt, ap);
 	va_end(ap);
@@ -713,7 +705,7 @@ ewarn(const char *EINFO_RESTRICT fmt, ...)
 	int retval;
 	va_list ap;
 
-	if (!fmt || is_quiet())
+	if (!fmt)
 		return 0;
 	va_start(ap, fmt);
 	elogv(LOG_WARNING, fmt, ap);
@@ -748,7 +740,7 @@ eerror(const char *EINFO_RESTRICT fmt, ...)
 	int retval;
 	va_list ap;
 
-	if (!fmt || is_really_quiet())
+	if (!fmt)
 		return 0;
 	va_start(ap, fmt);
 	elogv(LOG_ERR, fmt, ap);
@@ -765,7 +757,7 @@ eerrorx(const char *EINFO_RESTRICT fmt, ...)
 {
 	va_list ap;
 
-	if (fmt && !is_really_quiet()) {
+	if (fmt) {
 		va_start(ap, fmt);
 		elogv(LOG_ERR, fmt, ap);
 		_eerrorvn(fmt, ap);

src/librc/librc-daemon.c

@@ -30,7 +30,7 @@
 
 #include "librc.h"
 
-#if defined(__linux__)
+#if defined(__linux__) || defined (__GLIBC__)
 static bool
 pid_is_exec(pid_t pid, const char *exec)
 {

src/librc/librc-depend.c

@@ -856,7 +856,7 @@ rc_deptree_update(void)
 	 * work for them. This doesn't stop them from being run directly. */
 	if (sys) {
 		len = strlen(sys);
-		nosys = xmalloc(len + 1);
+		nosys = xmalloc(len + 2);
 		nosys[0] = '-';
 		for (i = 0; i < len; i++)
 			nosys[i + 1] = (char)tolower((unsigned char)sys[i]);

src/librc/librc.c

@@ -193,7 +193,7 @@ file_regex(const char *file, const char *regex)
 			str += strlen(str) + 1;
 			/* len is the size of allocated buffer and we don't
 			   want call regexec BUFSIZE times. find next str */
-			while (*str == '\0' && str < line + len)
+			while (str < line + len && *str == '\0')
 				str++;
 		} while (str < line + len);
 	}
@@ -323,42 +323,6 @@ rc_parse_service_state(RC_SERVICE state)
 	return NULL;
 }
 
-/* Returns a list of all the chained runlevels used by the
- * specified runlevel in dependency order, including the
- * specified runlevel. */
-static void
-get_runlevel_chain(const char *runlevel, RC_STRINGLIST *level_list)
-{
-	char path[PATH_MAX];
-	RC_STRINGLIST *dirs;
-	RC_STRING *d, *dn;
-
-	/*
-	 * If we haven't been passed a runlevel or a level list, or
-	 * if the passed runlevel doesn't exist then we're done already!
-	 */
-	if (!runlevel || !level_list || !rc_runlevel_exists(runlevel))
-		return;
-
-	/*
-	 * We want to add this runlevel to the list but if
-	 * it is already in the list it needs to go at the
-	 * end again.
-	 */
-	if (rc_stringlist_find(level_list, runlevel))
-		rc_stringlist_delete(level_list, runlevel);
-	rc_stringlist_add(level_list, runlevel);
-
-	/*
-	 * We can now do exactly the above procedure for our chained
-	 * runlevels.
-	 */
-	snprintf(path, sizeof(path), "%s/%s", RC_RUNLEVELDIR, runlevel);
-	dirs = ls_dir(path, LS_DIR);
-	TAILQ_FOREACH_SAFE(d, dirs, entries, dn)
-		get_runlevel_chain(d->value, level_list);
-}
-
 bool
 rc_runlevel_starting(void)
 {
@@ -460,10 +424,22 @@ librc_hidden_def(rc_runlevel_unstack)
 RC_STRINGLIST *
 rc_runlevel_stacks(const char *runlevel)
 {
-	RC_STRINGLIST *stack;
-	stack = rc_stringlist_new();
-	get_runlevel_chain(runlevel, stack);
-	return stack;
+	char path[PATH_MAX];
+	RC_STRINGLIST *dirs;
+	RC_STRING *d, *dn;
+
+	if (!runlevel)
+		return false;
+	snprintf(path, sizeof(path), "%s/%s", RC_RUNLEVELDIR, runlevel);
+	dirs = ls_dir(path, LS_DIR);
+	TAILQ_FOREACH_SAFE(d, dirs, entries, dn) {
+		if (!rc_runlevel_exists(d->value)) {
+			TAILQ_REMOVE(dirs, d, entries);
+			free(d->value);
+			free(d);
+		}
+	}
+	return dirs;
 }
 librc_hidden_def(rc_runlevel_stacks)
 
@@ -927,13 +903,17 @@ rc_services_in_runlevel_stacked(const char *runlevel)
 	stacks = rc_runlevel_stacks(runlevel);
 	TAILQ_FOREACH(stack, stacks, entries) {
 		sl = rc_services_in_runlevel(stack->value);
-		TAILQ_CONCAT(list, sl, entries);
-		free(sl);
+		if (list != NULL) {
+			TAILQ_CONCAT(list, sl, entries);
+			free(sl);
+		} else
+			list = sl;
 	}
 	return list;
 }
 librc_hidden_def(rc_services_in_runlevel_stacked)
 
+
 RC_STRINGLIST *
 rc_services_in_state(RC_SERVICE state)
 {

src/rc/.gitignore

@@ -3,7 +3,6 @@ rc-status
 rc-service
 rc-update
 runscript
-service
 start-stop-daemon
 einfon
 einfo

src/rc/_usage.c

@@ -35,21 +35,6 @@
 #  define _noreturn
 #endif
 
-static void set_quiet_options(void)
-{
-	static int qcount = 0;
-
-	qcount ++;
-	switch (qcount) {
-	case 1:
-		setenv ("EINFO_QUIET", "YES", 1);
-		break;
-	case 2:
-		setenv ("EERROR_QUIET", "YES", 1);
-		break;
-	}
-}
-
 _noreturn static void
 show_version(void)
 {

src/rc/_usage.h

@@ -38,13 +38,13 @@
 	"Disable color output",						      \
 	"Display software version",			              \
 	"Run verbosely",						      \
-	"Run quietly (repeat to suppress errors)"
+	"Run quietly (Does not affect errors)"
 
 #define case_RC_COMMON_getopt_case_C  setenv ("EINFO_COLOR", "NO", 1);
 #define case_RC_COMMON_getopt_case_h  usage (EXIT_SUCCESS);
 #define case_RC_COMMON_getopt_case_V  if (argc == 2) show_version();
 #define case_RC_COMMON_getopt_case_v  setenv ("EINFO_VERBOSE", "YES", 1);
-#define case_RC_COMMON_getopt_case_q  set_quiet_options();
+#define case_RC_COMMON_getopt_case_q  setenv ("EINFO_QUIET", "YES", 1);
 #define case_RC_COMMON_getopt_default usage (EXIT_FAILURE);
 
 #define case_RC_COMMON_GETOPT						      \

src/rc/mountinfo.c

@@ -39,7 +39,7 @@
 #  include <sys/statvfs.h>
 #  define statfs statvfs
 #  define F_FLAGS f_flag
-#elif defined (__linux__)
+#elif defined (__linux__) || defined (__GLIBC__)
 #  include <mntent.h>
 #endif
 
@@ -265,7 +265,7 @@ find_mounts(struct args *args)
 	return list;
 }
 
-#elif defined (__linux__)
+#elif defined (__linux__) || defined (__GLIBC__)
 static struct mntent *
 getmntfile(const char *file)
 {

src/rc/rc-logger.c

@@ -44,7 +44,7 @@
 #include <time.h>
 #include <unistd.h>
 
-#ifdef __linux__
+#if defined(__linux__) || defined(__GLIBC__)
 #  include <pty.h>
 #elif defined(__NetBSD__) || defined(__OpenBSD__)
 #  include <util.h>

src/rc/rc-status.c

@@ -171,26 +171,6 @@ print_services(const char *runlevel, RC_STRINGLIST *svcs)
 	rc_stringlist_free(l);
 }
 
-static void
-print_stacked_services(const char *runlevel)
-{
-	RC_STRINGLIST *stackedlevels, *servicelist;
-	RC_STRING *stackedlevel;
-
-	stackedlevels = rc_runlevel_stacks(runlevel);
-	TAILQ_FOREACH(stackedlevel, stackedlevels, entries) {
-		if (rc_stringlist_find(levels, stackedlevel->value) != NULL)
-			continue;
-		print_level("Stacked", stackedlevel->value);
-		servicelist = rc_services_in_runlevel(stackedlevel->value);
-		print_services(stackedlevel->value, servicelist);
-		rc_stringlist_free(servicelist);
-		print_stacked_services(stackedlevel->value);
-	}
-	rc_stringlist_free(stackedlevels);
-	stackedlevels = NULL;
-}
-
 #include "_usage.h"
 #define usagestring ""						\
 	"Usage: rc-status [options] <runlevel>...\n"		\
@@ -219,8 +199,7 @@ static const char * const longopts_help[] = {
 int
 rc_status(int argc, char **argv)
 {
-    RC_STRING *s, *l, *t, *level;
-
+	RC_STRING *s, *l, *t;
 	char *p, *runlevel = NULL;
 	int opt, aflag = 0, retval = 0;
 
@@ -301,7 +280,16 @@ rc_status(int argc, char **argv)
 		print_level(NULL, l->value);
 		services = rc_services_in_runlevel(l->value);
 		print_services(l->value, services);
-		print_stacked_services(l->value);
+		nservices = rc_runlevel_stacks(l->value);
+		TAILQ_FOREACH(s, nservices, entries) {
+			if (rc_stringlist_find(levels, s->value) != NULL)
+				continue;
+			print_level("Stacked", s->value);
+			sservices = rc_services_in_runlevel(s->value);
+			print_services(s->value, sservices);
+			rc_stringlist_free(sservices);
+		}
+		sservices = NULL;
 		rc_stringlist_free(nservices);
 		nservices = NULL;
 		rc_stringlist_free(services);
@@ -329,14 +317,16 @@ rc_status(int argc, char **argv)
 		services = rc_services_in_runlevel(NULL);
 		sservices = rc_stringlist_new();
 		TAILQ_FOREACH(l, levels, entries) {
-			nservices = rc_services_in_runlevel_stacked(l->value);
+			nservices = rc_services_in_runlevel(l->value);
 			TAILQ_CONCAT(sservices, nservices, entries);
 			free(nservices);
 		}
 		TAILQ_FOREACH_SAFE(s, services, entries, t) {
-			if ((rc_stringlist_find(sservices, s->value) ||
-			    (rc_service_state(s->value) & ( RC_SERVICE_STOPPED | RC_SERVICE_HOTPLUGGED)))) {
-				TAILQ_REMOVE(services, s, entries);
+			if (rc_stringlist_find(sservices, s->value) ||
+			    rc_service_state(s->value) &
+			    (RC_SERVICE_STOPPED | RC_SERVICE_HOTPLUGGED))
+		{
+			TAILQ_REMOVE(services, s, entries);
 				free(s->value);
 				free(s);
 			}
@@ -347,23 +337,22 @@ rc_status(int argc, char **argv)
 		alist = rc_stringlist_new();
 		l = rc_stringlist_add(alist, "");
 		p = l->value;
-		TAILQ_FOREACH(level, levels, entries) {
-			TAILQ_FOREACH_SAFE(s, services, entries, t) {
-				l->value = s->value;
-				setenv("RC_SVCNAME", l->value, 1);
-				tmp = rc_deptree_depends(deptree, needsme, alist, level->value, RC_DEP_TRACE);
-				if (TAILQ_FIRST(tmp)) {
-					TAILQ_REMOVE(services, s, entries);
-					TAILQ_INSERT_TAIL(nservices, s, entries);
-				}
-				rc_stringlist_free(tmp);
+		if (!runlevel)
+			runlevel = rc_runlevel_get();
+		TAILQ_FOREACH_SAFE(s, services, entries, t) {
+			l->value = s->value;
+			unsetenv("RC_SVCNAME");
+			setenv("RC_SVCNAME", l->value, 1);
+			tmp = rc_deptree_depends(deptree, needsme, alist, runlevel, RC_DEP_TRACE);
+			if (TAILQ_FIRST(tmp)) {
+				TAILQ_REMOVE(services, s, entries);
+				TAILQ_INSERT_TAIL(nservices, s, entries);
 			}
+			rc_stringlist_free(tmp);
 		}
 		l->value = p;
-		/*
-		 * we are unsetting RC_SVCNAME because last loaded service will not
-		 * be added to the list
-		 */
+		/* we are unsetting RC_SVCNAME because last loaded service 
+		   wount be added to list */
 		unsetenv("RC_SVCNAME");
 		print_level("Dynamic", "needed");
 		print_services(NULL, nservices);

src/rc/rc.c

@@ -79,6 +79,12 @@ const char rc_copyright[] = "Copyright (c) 2007-2008 Roy Marples";
 
 const char *applet = NULL;
 static char *runlevel;
+static RC_STRINGLIST *hotplugged_services;
+static RC_STRINGLIST *stop_services;
+static RC_STRINGLIST *start_services;
+static RC_STRINGLIST *types_n;
+static RC_STRINGLIST *types_nua;
+static RC_DEPTREE *deptree;
 static RC_HOOK hook_out;
 
 struct termios *termios_orig = NULL;
@@ -518,9 +524,7 @@ runlevel_config(const char *service, const char *level)
 }
 
 static void
-do_stop_services(const RC_STRINGLIST *types_n, const RC_STRINGLIST *start_services,
-				 const RC_STRINGLIST *stop_services, const RC_DEPTREE *deptree,
-				 const char *newlevel, bool parallel, bool going_down)
+do_stop_services(const char *newlevel, bool parallel, bool going_down)
 {
 	pid_t pid;
 	RC_STRING *service, *svc1, *svc2;
@@ -623,7 +627,7 @@ stop:
 }
 
 static void
-do_start_services(const RC_STRINGLIST *start_services, bool parallel)
+do_start_services(bool parallel)
 {
 	RC_STRING *service;
 	pid_t pid;
@@ -750,12 +754,6 @@ main(int argc, char **argv)
 {
 	const char *bootlevel = NULL;
 	char *newlevel = NULL;
-	static RC_STRINGLIST *hotplugged_services;
-	static RC_STRINGLIST *stop_services;
-	static RC_STRINGLIST *start_services;
-	static RC_STRINGLIST *types_n;
-	static RC_STRINGLIST *types_nua;
-	static RC_DEPTREE *deptree;
 	RC_STRINGLIST *deporder = NULL;
 	RC_STRINGLIST *tmplist;
 	RC_STRING *service;
@@ -870,11 +868,7 @@ main(int argc, char **argv)
 	snprintf(pidstr, sizeof(pidstr), "%d", getpid());
 	setenv("RC_PID", pidstr, 1);
 
-	/* Create a list of all services which should be started for the new or
-	* current runlevel including those in boot, sysinit and hotplugged
-	* runlevels.  Clearly, some of these will already be started so we
-	* won't actually be starting them all.
-	*/
+	/* Load current runlevel */
 	bootlevel = getenv("RC_BOOTLEVEL");
 	runlevel = rc_runlevel_get();
 
@@ -978,13 +972,8 @@ main(int argc, char **argv)
 		    applet, RC_STOPPING, strerror(errno));
 	}
 
-	/* Create a list of all services which we could stop (assuming
-	* they won't be active in the new or current runlevel) including
-	* all those services which have been started, are inactive or
-	* are currently starting.  Clearly, some of these will be listed
-	* in the new or current runlevel so we won't actually be stopping
-	* them all.
-	*/
+	/* Build a list of all services to stop and then work out the
+	 * correct order for stopping them */
 	stop_services = rc_services_in_state(RC_SERVICE_STARTED);
 	tmplist = rc_services_in_state(RC_SERVICE_INACTIVE);
 	TAILQ_CONCAT(stop_services, tmplist, entries);
@@ -1007,11 +996,7 @@ main(int argc, char **argv)
 		stop_services = tmplist;
 	}
 
-	/* Create a list of all services which should be started for the new or
-	 * current runlevel including those in boot, sysinit and hotplugged
-	 * runlevels.  Clearly, some of these will already be started so we
-	 * won't actually be starting them all.
-	 */
+	/* Load our list of start services */
 	hotplugged_services = rc_services_in_state(RC_SERVICE_HOTPLUGGED);
 	start_services = rc_services_in_runlevel_stacked(newlevel ?
 	    newlevel : runlevel);
@@ -1021,11 +1006,9 @@ main(int argc, char **argv)
 		tmplist = rc_services_in_runlevel(RC_LEVEL_SYSINIT);
 		TAILQ_CONCAT(start_services, tmplist, entries);
 		free(tmplist);
-		/* If we are NOT headed for the single-user runlevel... */
 		if (strcmp(newlevel ? newlevel : runlevel,
 			RC_LEVEL_SINGLE) != 0)
 		{
-			/* If we are NOT headed for the boot runlevel... */
 			if (strcmp(newlevel ? newlevel : runlevel,
 				bootlevel) != 0)
 			{
@@ -1046,7 +1029,7 @@ main(int argc, char **argv)
 
 	/* Now stop the services that shouldn't be running */
 	if (stop_services && !nostop)
-		do_stop_services(types_n, start_services, stop_services, deptree, newlevel, parallel, going_down);
+		do_stop_services(newlevel, parallel, going_down);
 
 	/* Wait for our services to finish */
 	wait_for_services();
@@ -1082,10 +1065,18 @@ main(int argc, char **argv)
 		TAILQ_FOREACH(service, hotplugged_services, entries)
 		    rc_service_mark(service->value, RC_SERVICE_HOTPLUGGED);
 
+	/* Order the services to start */
+	if (start_services) {
+		rc_stringlist_sort(&start_services);
+		deporder = rc_deptree_depends(deptree, types_nua,
+		    start_services, runlevel,
+		    depoptions | RC_DEP_START);
+		rc_stringlist_free(start_services);
+		start_services = deporder;
+	}
+
 #ifdef __linux__
-	/* If the "noinit" parameter was passed on the kernel command line then
-	 * mark the specified services as started so they will not be started
-	 * by us. */
+	/* mark any services skipped as started */
 	proc = p = rc_proc_getent("noinit");
 	if (proc) {
 		while ((token = strsep(&p, ",")))
@@ -1094,38 +1085,19 @@ main(int argc, char **argv)
 	}
 #endif
 
-	/* If we have a list of services to start then... */
 	if (start_services) {
-		/* Get a list of the chained runlevels which compose the target runlevel */
-		RC_STRINGLIST *runlevel_chain = rc_runlevel_stacks(runlevel);
+		do_start_services(parallel);
+		/* FIXME: If we skip the boot runlevel and go straight
+		 * to default from sysinit, we should now re-evaluate our
+		 * start services + hotplugged services and call
+		 * do_start_services a second time. */
 
-		/* Loop through them in reverse order. */
-		RC_STRING *rlevel;
-		TAILQ_FOREACH_REVERSE(rlevel, runlevel_chain, rc_stringlist, entries)
-		{
-			/* Get a list of all the services in that runlevel */
-			RC_STRINGLIST *run_services = rc_services_in_runlevel(rlevel->value);
-
-			/* Start those services. */
-			rc_stringlist_sort(&run_services);
-			deporder = rc_deptree_depends(deptree, types_nua, run_services, rlevel->value, depoptions | RC_DEP_START);
-			rc_stringlist_free(run_services);
-			run_services = deporder;
-			do_start_services(run_services, parallel);
-
-			/* Wait for our services to finish */
-			wait_for_services();
-
-			/* Free the list of services, we're done with it. */
-			rc_stringlist_free(run_services);
-		}
-		rc_stringlist_free(runlevel_chain);
+		/* Wait for our services to finish */
+		wait_for_services();
 	}
 
 #ifdef __linux__
-	/* If the "noinit" parameter was passed on the kernel command line then
-	 * mark the specified services as stopped so that our records reflect
-	 * reality.	 */
+	/* mark any services skipped as stopped */
 	proc = p = rc_proc_getent("noinit");
 	if (proc) {
 		while ((token = strsep(&p, ",")))

src/rc/runscript.c

@@ -52,7 +52,7 @@
 #include <time.h>
 #include <unistd.h>
 
-#ifdef __linux__
+#if defined(__linux__) || defined(__GLIBC__)
 #  include <pty.h>
 #elif defined(__NetBSD__) || defined(__OpenBSD__)
 #  include <util.h>

src/rc/start-stop-daemon.c

@@ -307,7 +307,7 @@ parse_schedule(const char *string, int timeout)
 }
 
 static pid_t
-get_pid(const char *pidfile)
+get_pid(const char *pidfile, bool quiet)
 {
 	FILE *fp;
 	pid_t pid;
@@ -316,12 +316,12 @@ get_pid(const char *pidfile)
 		return -1;
 
 	if ((fp = fopen(pidfile, "r")) == NULL) {
-		eerror("%s: fopen `%s': %s", applet, pidfile, strerror(errno));
+		ewarnv("%s: fopen `%s': %s", applet, pidfile, strerror(errno));
 		return -1;
 	}
 
 	if (fscanf(fp, "%d", &pid) != 1) {
-		eerror("%s: no pid found in `%s'", applet, pidfile);
+		ewarnv("%s: no pid found in `%s'", applet, pidfile);
 		fclose(fp);
 		return -1;
 	}
@@ -334,7 +334,8 @@ get_pid(const char *pidfile)
 /* return number of processed killed, -1 on error */
 static int
 do_stop(const char *exec, const char *const *argv,
-    pid_t pid, uid_t uid,int sig, bool test)
+    pid_t pid, uid_t uid,int sig,
+    bool quiet, bool verbose, bool test)
 {
 	RC_PIDLIST *pids;
 	RC_PID *pi;
@@ -352,16 +353,20 @@ do_stop(const char *exec, const char *const *argv,
 
 	LIST_FOREACH_SAFE(pi, pids, entries, np) {
 		if (test) {
-			einfo("Would send signal %d to PID %d", sig, pi->pid);
+			if (!quiet)
+				einfo("Would send signal %d to PID %d", sig, pi->pid);
 			nkilled++;
 		} else {
-			ebeginv("Sending signal %d to PID %d", sig, pi->pid);
+			if (verbose)
+				ebegin("Sending signal %d to PID %d",
+				    sig, pi->pid);
 			errno = 0;
 			killed = (kill(pi->pid, sig) == 0 ||
 			    errno == ESRCH ? true : false);
-			eendv(killed ? 0 : 1,
-				"%s: failed to send signal %d to PID %d: %s",
-				applet, sig, pi->pid, strerror(errno));
+			if (verbose)
+				eend(killed ? 0 : 1,
+				    "%s: failed to send signal %d to PID %d: %s",
+				    applet, sig, pi->pid, strerror(errno));
 			if (!killed) {
 				nkilled = -1;
 			} else {
@@ -379,7 +384,7 @@ do_stop(const char *exec, const char *const *argv,
 static int
 run_stop_schedule(const char *exec, const char *const *argv,
     const char *pidfile, uid_t uid,
-    bool test, bool progress)
+    bool quiet, bool verbose, bool test, bool progress)
 {
 	SCHEDULEITEM *item = TAILQ_FIRST(&schedule);
 	int nkilled = 0;
@@ -391,15 +396,15 @@ run_stop_schedule(const char *exec, const char *const *argv,
 	const char *const *p;
 	bool progressed = false;
 
-	if (exec)
-		einfov("Will stop %s", exec);
-	if (pidfile)
-		einfov("Will stop PID in pidfile `%s'", pidfile);
-	if (uid)
-		einfov("Will stop processes owned by UID %d", uid);
-	if (argv && *argv) {
-		einfovn("Will stop processes of `");
-		if (rc_yesno(getenv("EINFO_VERBOSE"))) {
+	if (verbose) {
+		if (exec)
+			einfo ("Will stop %s", exec);
+		if (pidfile)
+			einfo("Will stop PID in pidfile `%s'", pidfile);
+		if (uid)
+			einfo("Will stop processes owned by UID %d", uid);
+		if (argv && *argv) {
+			einfon("Will stop processes of `");
 			for (p = argv; p && *p; p++) {
 				if (p != argv)
 					printf(" ");
@@ -410,7 +415,7 @@ run_stop_schedule(const char *exec, const char *const *argv,
 	}
 
 	if (pidfile) {
-		pid = get_pid(pidfile);
+		pid = get_pid(pidfile, false);
 		if (pid == -1)
 			return 0;
 	}
@@ -423,7 +428,8 @@ run_stop_schedule(const char *exec, const char *const *argv,
 
 		case SC_SIGNAL:
 			nrunning = 0;
-			nkilled = do_stop(exec, argv, pid, uid, item->value, test);
+			nkilled = do_stop(exec, argv, pid, uid, item->value,
+			    quiet, verbose, test);
 			if (nkilled == 0) {
 				if (tkilled == 0) {
 					if (progressed)
@@ -452,7 +458,8 @@ run_stop_schedule(const char *exec, const char *const *argv,
 				     nloops++)
 				{
 					if ((nrunning = do_stop(exec, argv,
-						    pid, uid, 0, true)) == 0)
+						    pid, uid, 0, true, false,
+	test)) == 0)
 						return 0;
 
 
@@ -669,6 +676,8 @@ start_stop_daemon(int argc, char **argv)
 	bool stop = false;
 	bool oknodo = false;
 	bool test = false;
+	bool quiet;
+	bool verbose = false;
 	char *exec = NULL;
 	char *startas = NULL;
 	char *name = NULL;
@@ -905,6 +914,8 @@ start_stop_daemon(int argc, char **argv)
 	endpwent();
 	argc -= optind;
 	argv += optind;
+	quiet = rc_yesno(getenv("EINFO_QUIET"));
+	verbose = rc_yesno(getenv("EINFO_VERBOSE"));
 
 	/* Allow start-stop-daemon --signal HUP --exec /usr/sbin/dnsmasq
 	 * instead of forcing --stop --oknodo as well */
@@ -1048,7 +1059,7 @@ start_stop_daemon(int argc, char **argv)
 		else
 			parse_schedule(NULL, sig);
 		i = run_stop_schedule(exec, (const char *const *)margv,
-		    pidfile, uid, test, progress);
+		    pidfile, uid, quiet, verbose, test, progress);
 
 		if (i < 0)
 			/* We failed to stop something */
@@ -1070,16 +1081,16 @@ start_stop_daemon(int argc, char **argv)
 	}
 
 	if (pidfile)
-		pid = get_pid(pidfile);
+		pid = get_pid(pidfile, true);
 	else
 		pid = 0;
 
 	if (do_stop(exec, (const char * const *)margv, pid, uid,
-		0, true) > 0)
+		0, true, false, test) > 0)
 		eerrorx("%s: %s is already running", applet, exec);
 
 	if (test) {
-		if (rc_yesno(getenv("EINFO_QUIET")))
+		if (quiet)
 			exit (EXIT_SUCCESS);
 
 		einfon("Would start");
@@ -1103,8 +1114,10 @@ start_stop_daemon(int argc, char **argv)
 		exit(EXIT_SUCCESS);
 	}
 
-	ebeginv("Detaching to start `%s'", exec);
-	eindentv();
+	if (verbose) {
+		ebegin("Detaching to start `%s'", exec);
+		eindent();
+	}
 
 	/* Remove existing pidfile */
 	if (pidfile)
@@ -1272,9 +1285,9 @@ start_stop_daemon(int argc, char **argv)
 		}
 
 		/* We don't redirect stdin as some daemons may need it */
-		if (background || redirect_stdout || rc_yesno(getenv("EINFO_QUIET")))
+		if (background || quiet || redirect_stdout)
 			dup2(stdout_fd, STDOUT_FILENO);
-		if (background || redirect_stderr || rc_yesno(getenv("EINFO_QUIET")))
+		if (background || redirect_stderr)
 			dup2(stderr_fd, STDERR_FILENO);
 
 		for (i = getdtablesize() - 1; i >= 3; --i)
@@ -1305,10 +1318,9 @@ start_stop_daemon(int argc, char **argv)
 				return -1;
 			}
 		} while (!WIFEXITED(i) && !WIFSIGNALED(i));
-		if (!WIFEXITED(i) || WEXITSTATUS(i) != 0) {
-			eerror("%s: failed to start `%s'", applet, exec);
-			exit(EXIT_FAILURE);
-		}
+		if (!WIFEXITED(i) || WEXITSTATUS(i) != 0)
+			eerrorx("%s: failed to start `%s'", applet, exec);
+
 		pid = spid;
 	}
 
@@ -1342,7 +1354,7 @@ start_stop_daemon(int argc, char **argv)
 				alive = true;
 		} else {
 			if (pidfile) {
-				pid = get_pid(pidfile);
+				pid = get_pid(pidfile, false);
 				if (pid == -1) {
 					eerrorx("%s: did not "
 					    "create a valid"
@@ -1352,7 +1364,7 @@ start_stop_daemon(int argc, char **argv)
 			} else
 				pid = 0;
 			if (do_stop(exec, (const char *const *)margv,
-				pid, uid, 0, true) > 0)
+				pid, uid, 0, true, false, test) > 0)
 				alive = true;
 		}