Fix dist for svn

.gitignore

@@ -1,16 +0,0 @@
-*.gz
-
-*.diff
-*.patch
-*.orig
-*.rej
-
-core
-.gdb_history
-.gdbinit
-
-.depend
-*.a
-*.o
-*.So
-lib*.so

AUTHORS

@@ -1,99 +0,0 @@
-Alessio Ababilov <ilovedevlinux@gmail.com>
-Alexander Berntsen <alexander@plaimi.net>
-Alexander Mezin <mezin.alexander@gmail.com>
-Alexander Tsoy <alexander@tsoy.me>
-Alexander Vershilov <alexander.vershilov@gmail.com>
-Alexander Vershilov <qnikst@gentoo.org>
-Alexander V Vershilov <qnikst@gentoo.org>
-Alexey Shvetsov <alexxy@gentoo.org>
-Alon Bar-Lev <alon.barlev@gmail.com>
-Amadeusz Żołnowski <aidecoe@aidecoe.name>
-Andrew Gregory <andrew.gregory.8@gmail.com>
-Anthony Donnelly <Amzo@archbsd.com>
-Anthony G. Basile <basile@opensource.dyc.edu>
-Anthony G. Basile <blueness@gentoo.org>
-Austin S. Hemmelgarn <ahferroin7@gmail.com>
-Benda Xu <heroxbd@gentoo.org>
-Björn Baumbach <bb@sernet.de>
-Charlie <root@uberlaptop.development.ltl>
-Chris Richards <gizmo@giz-works.com>
-Christian <christian@ch-sc.de>
-Christian Ruppert <idl0r@gentoo.org>
-Christian Wetzig <gentoo@wetzig.de>
-Christopher Head <chead@telus.net>
-Consus <consus@gmx.com>
-Daniel Mierswa <impulze@impulze.org>
-Daniel Robbins <drobbins@funtoo.org>
-Diego Elio Pettenò <flameeyes@flameeyes.eu>
-Diego Elio Pettenò <flameeyes@gmail.com>
-Diego <flameeyes@gentoo.org>
-Dirk Sondermann <ds-gentoo@dyximaq.de>
-Doug Freed <dwfreed@mtu.edu>
-Doug Goldstein <cardoe@cardoe.com>
-Ed Wildgoose <gentoo@wildgooses.com>
-Eray Aslan <eras@gentoo.org>
-Eugeny Shkrigunov <eshkrig@gmail.com>
-Fedja Beader <specing@contact.me.on.irc.freenode.net>
-Flex <frostynova@gmail.com>
-Gabriele Giacone <1o5g4r8o@gmail.com>
-Gary <admin@garyshood.com>
-Gilles Oivier <g.olivier@wanadoo.fr>
-Hank Leininger <hlein@korelogic.com>
-Ian Stakenvicius <axs@gentoo.org>
-Jakob Drexel <jake42@rommel.stw.uni-erlangen.de>
-James Le Cuirot <chewi@aura-online.co.uk>
-Jan Psota <jasiu@belsznica.pl>
-Jason Zaman <jason@perfinion.com>
-Joe Harvell <jharvell@dogpad.net>
-Joe M <joe9mail@gmail.com>
-Johan Bergström <bugs@bergstroem.nu>
-Jory A. Pratt <anarchy@gentoo.org>
-Juan RP <xtraeme@gmail.com>
-Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>
-Kfir Lavi <lavi.kfir@gmail.com>
-Kirill Elagin <kirelagin@gmail.com>
-Lars Wendler <polynomial-c@gentoo.org>
-Lorand Kelemen <lorand.kelemen@indgroup.eu>
-Marc Joliet <marcec@gmx.de>
-Marien Zwart <marienz@gentoo.org>
-Michal Gorny <gentoo@mgorny.alt.pl>
-Mihai Moldovan <ionic@ionic.de>
-Mike Frysinger <vapier@gentoo.org>
-Mike Gilbert <floppym@gentoo.org>
-Nao Nakashima <nao.nakashima@gmail.com>
-Natanael Copa <natanael.copa@gmail.com>
-Nathan Phillip Brink <ohnobinki@ohnopublishing.net>
-Ned Ludd <solar@gentoo.org>
-Olivier Huber <oli.huber@gmail.com>
-Patrick Lauer <patrick@gentoo.org>
-Petre Rodan <petre.rodan@simplex.ro>
-Piotr Karbowski <piotr.karbowski@gmail.com>
-Ralph Sennhauser <sera@gentoo.org>
-Richard Yao <ryao@cs.stonybrook.edu>
-Rick Farina (ZeroChaos) <sidhayn@gmail.com>
-Rick Farina (Zero_Chaos) <zerochaos@gentoo.org>
-Robin H. Johnson <robbat2@gentoo.org>
-Robin H. Johnson <robbat2@orbis-terrarum.net>
-Robin Johnson <robbat2@gentoo.org>
-Roy Marples <roy@marples.name>
-Salah Coronya <salah.coronya@gmail.com>
-Sebastian Thorarensen <indigo176@blinkenshell.org>
-Semen Maryasin <marsoft@ya.ru>
-Sergei Trofimovich <slyfox@gentoo.org>
-Seth Robertson <in-gentoo@baka.org>
-S. Gilles <sgilles@umd.edu>
-Stefan Knoblich <s.knoblich@axsentis.de>
-Stef Simoens <stef.simoens@scarlet.be>
-Steve L <slong@rathaus.eclipse.co.uk>
-Steven Chamberlain <steven@pyro.eu.org>
-Svante Signell <svante.signell@gmail.com>
-Sven Vermeulen <sven.vermeulen@siphos.be>
-Thomas D <whissi@whissi.de>
-Thomas Pfaff <tpfaff@gmx.net>
-Trevor Summers Smith <trevorsummerssmith@gmail.com>
-Walter <walter@pratyeka.org>
-William Hubbs <w.d.hubbs@gmail.com>
-William Hubbs <williamh@gentoo.org>
-Will Miles <wmiles@sgl.com>
-Yun Zheng Hu <hu@fox-it.com>
-Yuta SATOH <nigoro.gentoo@0x100.com>

BUSYBOX.md

@@ -1,29 +0,0 @@
-# Using Busybox as your Default Shell with OpenRC
-
-If you have/bin/sh linked to busybox, you need to be aware of several
-incompatibilities between busybox's applets and the standalone
-counterparts. Since it is possible to configure busybox to not include
-these applets or to prefer the standalone counterparts, OpenRC does not
-attempt to support the busybox applets.
-
-For now, it is recommended that you disable the following busybox
-configuration settings for best results with OpenRC.
-
-CONFIG_START_STOP_DAEMON -- The start-stop-daemon applet is not compatible with
-start-stop-daemon in OpenRC.
-
-CONFIG_MOUNT -- The mount applet does not support the -O [no]_netdev options to
-skip over or include network file systems when the -a option is present.
-
-CONFIG_UMOUNT -- The umount applet does not support the -O option along with -a.
-
-CONFIG_SWAPONOFF -- The swapon applet does not support the -e option
-or recognize the nofail option in fstab.
-
-CONFIG_SETFONT -- The setfont applet does not support the -u option from kbd.
-
-CONFIG_BB_SYSCTL -- The sysctl applet does not support the --system command
-line switch.
-
-There is work to get most of these supported by busybox, so this file
-will be updated as things change.

FEATURE-REMOVAL-SCHEDULE.md

@@ -1,78 +0,0 @@
-# Features Scheduled for Removal
-
-The following is a list of files and features that are going to be removed in
-the source tree.  Every entry should contain what exactly is going away, why it
-is happening, and who is going to be doing the work.  When the feature is
-removed, it should also be removed from this file.
-
-## Service pause action
-
-When: 1.0
-
-Why: The same affect can be obtained with the --nodeps option to stop.
-
-Who:
-
-## start-stop-daemon options --startas, --chuid , --oknodo
-
-When: 1.0
-
-Why: Obsolete or replaced by other options.
-
-* --startas => use --name or --exec
-* --chuid => use --user
-* --oknodo => ignore return code instead
-
-Who:
-
-## runscript and rc symbolic links
-
-When: 1.0
-
-Why: Deprecated in favor of openrc-run and openrc due to naming
-	 conflicts with other software.
-
-Who:
-
-## support for the opts variable in service scripts
-
-When: 1.0
-
-Why: Deprecated in favor of extra_commands, extra_started_commands
-	 and extra_stopped_commands.
-
-Who:
-
-## support for local_start and local_stop
-
-When: 1.0
-
-Why: Deprecated in favor of executable scripts in @SYSCONFDIR@/local.d
-
-Who:
-
-## the mtab service script
-
-When: force /etc/mtab to link to /proc/self/mounts in 1.0, remove
-	  service in 2.0
-
-Why: /etc/mtab should be a symbolic link to /proc/self/mounts on modern
-	 Linux systems
-
-Who:
-
-## C API Functions in rc.h
-
-If you have a c program that links to librc and uses functions from
-there, this section will list API functions which are deprecated and
-will be removed along with the reason they are being removed.
-
-### rc_getline()
-
-When: 1.0
-
-Why: The getline() function was standardized in POSIX.1-2008, so it
-	 should be available on POSIX systems.
-
-Who:
-

HISTORY.md

@@ -1,62 +0,0 @@
-# OpenRC History
-
-This history of OpenRC was written by Daniel Robbins, Roy Marples, William
-Hubbs and others.
-
-The Gentoo modular init scripts were developed by Daniel Robbins for Gentoo
-Linux 1.0_rc6 during most of 2001 and released in September 2001. After their
-development, the dependency-based init script system was maintained by a
-number of senior developers, starting with Azarah (Martin Schlemmer), with
-migration to the new init system assisted by Woodchip (Donnie Davies) who
-converted all ebuild init scripts to work with the new system. As Grant
-Goodyear notes: 
-
-"My recollection is that one of woodchip's more impressive early feats
-was the complete replacement of all of the init scripts in Portage
-for Gentoo Linux 1.0_rc6. Through 1.0_rc5 Gentoo had used fairly
-standard rc scripts modified from Stampede Linux, but for 1.0_rc6 Daniel
-Robbins (drobbins) and Martin Schlemmer (azarah) had created a new
-dependency-based init script system that is still used today. Within a
-span of days Donny rewrote every single init script in the Portage tree
-and committed new masked packages to await the release of 1.0_rc6. Thanks to
-woodchip (and drobbins and azarah, of course) the
-transition to the new init scripts was nearly painless." [1] 
-
-Roy Marples became a Gentoo/Linux developer in 2004 and wrote the modular
-network scripts for the Gentoo baselayout package. Towards the end of 2005,
-he became the primary maintainer for baselayout and the init scripts. 
-
-At the start of 2007, He announced the ongoing development of
-baselayout-2, containing a rewritten core coded in C and allowing POSIX sh
-init scripts instead of forcing the use of bash. By mid 2007, He had
-re-implemented the Gentoo init script design created by Daniel Robbins,
-using an entirely new code base. Alpha and pre-release baselayout-2
-snapshots were added to Gentoo's Portage tree as an optional component.
-
-Toward the end of 2007, Roy retired as a Gentoo developer.
-Baselayout-2 was still in the pre stage, and aside from the gentoo-fbsd
-users, it was masked. However, He desired to keep the baselayout-2
-project moving forward as an independent project. The Gentoo Council
-permitted Him to release OpenRC under the 2-clause BSD license,
-managed by him as an external project. 
-
-Around mid-2010, Roy decided to no longer maintain OpenRC. At this
-point, he transferred development back to Gentoo.
-
-William Hubbs, and several other Gentoo developers,  started working on
-OpenRC around this point and brought OpenRC-0.8.x to Gentoo Linux's stable
-tree in 2011.
-
-In 2013 the OpenRC team became independent from Gentoo again and moved primary
-development to github.
-
-Daniel Robbins continues to maintain an independent, forked
-version of OpenRC for Funtoo Linux, which includes a Funtoo-specific network
-configuration system. 
-
-On 17-Dec-2015 utc, Roy gave the OpenRC developers permission to replace his
-copyrights in all source files with a generic Copyright assertion for
-the OpenRC developers as long as we keep the original copyright in the
-binaries and  LICENSE file.
-
-[1] http://www.gentoo.org/news/en/gwn/20040426-newsletter.xml

LICENSE

@@ -1,24 +0,0 @@
-Copyright (c) 2007-2008, Roy Marples <roy@marples.name>
-Copyright (c) 2007-2015, the OpenRC authors
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
-1. Redistributions of source code must retain the above copyright notice,
-   this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
-   notice, this list of conditions and the following disclaimer in the
-   documentation and/or other materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.

Makefile

@@ -1,42 +1,23 @@
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+# OpenRC Makefile
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
-TOP:=		${dir ${realpath ${firstword ${MAKEFILE_LIST}}}}
-MK=			${TOP}/mk
-
-include ${TOP}/Makefile.inc
-
-SUBDIR=		conf.d etc init.d local.d man scripts sh src support sysctl.d
-
-# Build pkgconfig or not
-MKPKGCONFIG?=	yes
-ifeq (${MKPKGCONFIG},yes)
-SUBDIR+=	pkgconfig
-endif
+NAME=		openrc
+VERSION=	0.4.0
+PKG=		${NAME}-${VERSION}
 
+SUBDIR=		conf.d doc etc init.d man net sh src
 # We need to ensure that runlevels is done last
 SUBDIR+=	runlevels
 
 INSTALLAFTER=	_installafter
 
+MK= 		mk
 include ${MK}/sys.mk
 include ${MK}/os.mk
 include ${MK}/subdir.mk
 include ${MK}/dist.mk
-include ${MK}/gitver.mk
 
 _installafter:
-ifeq (${MKPREFIX},yes)
-	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/init.d
-else ifneq (${OS},Linux)
-	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/init.d
-endif
-	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/tmp
-	${ECHO} "${VERSION}${GITVER}" > ${DESTDIR}/${LIBEXECDIR}/version
+	${INSTALL} -d ${DESTDIR}/${PREFIX}/${RC_LIB}/init.d
+	${INSTALL} -d ${DESTDIR}/${PREFIX}/${RC_LIB}/tmp

Makefile.inc

@@ -1,3 +0,0 @@
-NAME=		openrc
-VERSION=	0.27
-PKG=		${NAME}-${VERSION}

NEWS.md

@@ -1,186 +0,0 @@
-# OpenRC NEWS
-
-This file will contain a list of notable changes for each release. Note
-the information in this file is in reverse order.
-
-## OpenRC-0.25
-
-This version contains an OpenRC-specific implementation of init for
-Linux which can be used in place of sysvinit or any other init process.
-For information on its usage, see the man pages for openrc-init (8) and
-openrc-shutdown (8).
-
-## OpenRC-0.24.1
-
-This version starts cleaning up the dependencies so that rc_parallel
-will work correctly.
-
-The first step in this process is to remove the 'before *' from the
-depend functions in the clock services. This means some  services not
-controlled by OpenRC may now start before instead of after the clock
-service. If it is important for these services to start after the clock
-service, they need to have 'after clock' added to their depend
-functions.
-
-## OpenRC-0.24
-
-Since the deptree2dot tool and the perl requirement are completely
-optional, the deptree2dot tool has been moved to the support directory.
-As a result, the MKTOOLS=yes/no switch has been removed from the makefiles.
-
-This version adds the agetty service which can be used to spawn
-agetty on a specific terminal. This is currently documented in the
-agetty-guide.md file at the top level of this distribution.
-
-## OpenRC-0.23
-
-The tmpfiles.d processing code, which was part of previous versions of
-OpenRC, has been separated into its own package [1]. If you need to
-process systemd style tmpfiles.d files, please install this package.
-
-[1] https://github.com/openrc/opentmpfiles
-
-## OpenRC-0.22
-
-In previous versions of OpenRC, configuration information was processed
-so that service-specific configuration stored in /etc/conf.d/* was
-overridden by global configuration stored in /etc/rc.conf. This release
-reverses that. Global configuration is now overridden by
-service-specific configuration.
-
-The swapfiles service, which was basically a copy of the swap service,
-has been removed. If you are only using swap partitions, this change
-will not affect you. If you are using swap files, please adjust the
-dependencies of the swap service as shown in /etc/conf.d/swap.
-
-## OpenRC-0.21
-
-This version adds a daemon supervisor which can start daemons and
-restart them if they crash. See supervise-daemon-guide.md in the
-distribution for details on its use.
-
-It is now possible to mark certain mount points as critical. If these
-mount points are unable to be mounted, localmount or netmount will fail.
-This is handled in /etc/conf.d/localmount and /etc/conf.d/netmount. See
-these files for the setup.
-
-The deprecation messages in 0.13.x for runscript and rc are now
-made visible in preparation for the removal of these binaries in 1.0.
-
-The steps you should take to get rid of these warnings is to run openrc
-in initialization steps instead of rc and change the shebang lines in
-service scripts to refer to "openrc-run" instead of "runscript".
-
-In 0.21.4, a modules-load service was added. This works like the
-equivalent service in systemd. It looks for files named *.conf first in
-/usr/lib/modules-load.d, then /run/modules-load.d, then
-/etc/modules-load.d. These files contain a list of modules, one per
-line, which should be loaded into the kernel. If a file name appears in
-/run/modules-load.d, it overrides a file of the same name in
-/usr/lib/modules-load.d. A file appearing in /etc/modules-load.d
-overrides a file of the same name in both previous directories.
-
-## OpenRC-0.19
-
-This version adds a net-online service. By default, this
-service will check all known network interfaces for a configured
-interface or a carrier. It will register as started only when all
-interfaces are configured and there is at least a carrier on one
-interface. The behaviour of this service can be modified in
-/etc/conf.d/net-online.
-
-Currently, this only works on Linux, but if anyone wants to port to
-*bsd, that would be welcomed.
-
-## OpenRC-0.18.3
-
-Modern Linux systems expect /etc/mtab to be a symbolic link to
-/proc/self/mounts. Reasons for this change include support for mount
-namespaces, which will not work if /etc/mtab is a file.
-By default, the mtab service enforces this on each reboot.
-
-If you find that this breaks your system in some way, please do the
-following:
-
-- Set mtab_is_file=yes in /etc/conf.d/mtab.
-
-- Restart mtab. This will recreate the /etc/mtab file.
-
-- Check for an issue on https://github.com/openrc/openrc/issues
-  explaining why you need /etc/mtab to be a file. If there isn't one,
-  please open one and explain in detail why you need this to be a file.
-  If there is one, please add your comments to it. Please give concrete
-  examples of why  it is important that /etc/mtab be a file instead of a
-  symbolic link. Those comments will be taken into consideration for how
-  long to keep supporting mtab as a file or when the support can be
-  removed.
-
-## OpenRC-0.18
-
-The behaviour of localmount and netmount in this version is changing. In
-the past, these services always started successfully. In this version,
-they will be able to fail if file systems they mount fail to mount. If
-you have file systems listed in fstab which should not be mounted at
-boot time, make sure to add noauto to the mount options. If you have
-file systems that you want to attempt to mount at boot time but failure
-should be allowed, add nofail to the mount options for these file
-systems in fstab.
-
-## OpenRC-0.14
-
-The binfmt service, which registers misc binary formats with the Linux
-kernel, has been separated from the procfs service. This service will be
-automatically added to the boot runlevel for new Linux installs. When
-you upgrade, you will need to use rc-update to add it to your boot
-runlevel.
-
-The procfs service no longer automounts the deprecated usbfs and
-usbdevfs file systems. Nothing should be using usbdevfs any longer, and
-if you still need usbfs it can be added to fstab.
-
-Related to the above change, the procfs service no longer attempts to
-modprobe the usbcore module. If your device manager does not load it,
-you will need to configure the modules service to do so.
-
-The override order of binfmt.d and tmpfiles.d directories has been
-changed to match systemd. Files in /run/binfmt.d and /run/tmpfiles.d
-override their /usr/lib counterparts, and files in the /etc counterparts
-override both /usr/lib and /run.
-
-## OpenRC-0.13.2
-
-A chroot variable has been added to the service script variables.
-This fixes the support for running a service in a chroot.
-This is documented in man 8 openrc-run.
-
-The netmount service now mounts nfs file systems.
-This change was made to correct a fix for an earlier bug.
-
-## OpenRC-0.13
-
-/sbin/rc was renamed to /sbin/openrc and /sbin/runscript was renamed to
-/sbin/openrc-run due to naming conflicts with other software.
-
-Backward compatible symbolic links are currently in place so your
-system will keep working if you are using the old names; however, it is
-strongly advised that you migrate to the new names because the symbolic
-links will be removed in the future.
-Warnings have been added to assist with this migration; however, due to the
-level of noise they produce, they only appear in verbose mode in this release.
-
-The devfs script now handles the initial mounting and setup of the
-/dev directory. If /dev has already been mounted by the kernel or an
-initramfs, devfs will remount /dev with the correct mount options
-instead of mounting a second /dev over the existing mount point.
-
-It attempts to mount /dev from fstab first if an entry exists there. If
-it doesn't it attempts to mount devtmpfs if it is configured in the
-kernel. If not, it attempts to mount tmpfs.
-If none of these is available, an error message is displayed and static
-/dev is assumed.
-
-## OpenRC-0.12
-
-The net.* scripts, originally from Gentoo Linux, have
-been removed. If you need these scripts, look for a package called
-netifrc, which is maintained by them.

README

@@ -0,0 +1,81 @@
+OpenRC README
+
+
+Installation
+------------
+make install
+Yup, that simple. Works with GNU make and BSD make.
+
+You may wish to tweak the installation with the below arguments
+PROGLDFLAGS=-static
+LIBNAME=lib64
+DESTDIR=/tmp/openrc-image
+MKPAM=pam
+MKTERMCAP=ncurses
+MKTERMCAP=termcap
+PKG_PREFIX=/usr/pkg
+LOCAL_PREFIX=/usr/local
+PREFIX=/usr/local
+
+We don't support building a static OpenRC with PAM.
+You may need to use PROGLDFLAGS=-Wl,-Bstatic on glibc instead of just -static.
+If you debug memory under valgrind, add -DDEBUG_MEMORY to your CPPFLAGS
+so that all malloc memory should be freed at exit.
+
+You can also brand OpenRC if you so wish like so
+BRANDING=\"Gentoo/$(uname -s)\"
+
+PKG_PREFIX should be set to where packages install to by default.
+LOCAL_PREFIX should be set when to where user maintained packages are.
+Only set LOCAL_PREFIX if different from PKG_PREFIX.
+PREFIX should be set when OpenRC is not installed to /.
+
+If any of the following files exist then we do not overwrite them
+/etc/devd.conf
+/etc/rc
+/etc/rc.shutdown
+/etc/conf.d/*
+
+rc and rc.shutdown are the hooks from the BSD init into OpenRC.
+devd.conf is modified from FreeBSD to call /etc/rc.devd which is a generic
+hook into OpenRC.
+inittab is the same, but for SysVInit as used by most Linux distrubtions.
+This can be found in the support folder.
+Obviously, if you're installing this onto a system that does not use OpenRC
+by default then you may wish to backup the above listed files, remove them
+and then install so that the OS hooks into OpenRC.
+
+init.d.misc is not installed by default as the scripts will need
+tweaking on a per distro basis. They are also non essential to the operation
+of the system.
+
+
+Reporting Bugs
+-------------
+If you installed OpenRC from your chosen distribution, you should report
+bugs directly to them. For example, if you use Gentoo and emerged OpenRC
+then you should reports bugs to http://bugs.gentoo.org.
+
+Otherwise, you can report them directly to me at http://bugs.marples.name
+
+
+History - by Roy Marples
+------------------------
+I became a Gentoo/Linux developer in 2004 and wrote the modular network
+scripts for the Gentoo baselayout package. baselayout is a collection of
+bash scripts to bring up your computer and it's services.
+Then towards the end of 2005 I found myself as the primary maintainer
+for baselayout.
+
+At the start of 2007, baselayout-2 is announced to the world, re-writing the
+core of baselayout in C and allowing POSIX sh init scripts instead of
+forcing the use of bash. By Mid 2007 I have re-written everything, including
+init scripts, and alpha and pre baselayout-2 snapshots where put into Gentoo.
+Towards the end of 2007 I retired as a Gentoo developer for reasons I won't
+go into here. baselayout-2 was still in the pre stage, and aside from the
+fbsd users, it was masked everywhere. However, I also desired to keep the
+baselayout-2 project alive, but outside of Gentoo and into other projects
+such as FreeBSD.
+
+As such, the Gentoo Council have allowed the creation of OpenRC under the
+2 clause BSD license, managed by me as an external project.

README.md

@@ -1,92 +0,0 @@
-# OpenRC README
-
-OpenRC is a dependency-based init system that works with the
-system-provided init program, normally `/sbin/init`. Currently, it does
-not have an init program of its own.
-
-## Installation
-
-OpenRC requires GNU make.
-
-Once you have GNU Make installed, the default OpenRC installation can be
-executed using this command:
-
-make install
-
-## Configuration
-
-You may wish to configure the installation by passing one or more of the
-below arguments to the make command
-
-```
-PROGLDFLAGS=-static
-LIBNAME=lib64
-DESTDIR=/tmp/openrc-image
-MKNET=no
-MKPAM=pam
-MKPREFIX=yes
-MKPKGCONFIG=no
-MKSELINUX=yes
-MKSTATICLIBS=no
-MKSYSVINIT=yes
-MKTERMCAP=ncurses
-MKTERMCAP=termcap
-PKG_PREFIX=/usr/pkg
-LOCAL_PREFIX=/usr/local
-PREFIX=/usr/local
-BRANDING=\"Gentoo/$(uname -s)\"
-```
-
-## Notes
-
-We don't support building a static OpenRC with PAM.
-
-You may need to use `PROGLDFLAGS=-Wl,-Bstatic` on glibc instead of just `-static`.
-
-If you are building OpenRC for a Gentoo Prefix installation, add `MKPREFIX=yes`.
-
-`PKG_PREFIX` should be set to where packages install to by default.
-
-`LOCAL_PREFIX` should be set when to where user maintained packages are.
-Only set `LOCAL_PREFIX` if different from `PKG_PREFIX`.
-
-`PREFIX` should be set when OpenRC is not installed to /.
-
-If any of the following files exist then we do not overwrite them
-
-```
-/etc/devd.conf
-/etc/rc
-/etc/rc.shutdown
-/etc/conf.d/*
-```
-
-`rc` and `rc.shutdown` are the hooks from the BSD init into OpenRC.
-
-`devd.conf` is modified from FreeBSD to call `/etc/rc.devd` which is a
-generic hook into OpenRC.
-
-`inittab` is the same, but for SysVInit as used by most Linux distributions.
-This can be found in the support folder.
-
-Obviously, if you're installing this onto a system that does not use
-OpenRC by default then you may wish to backup the above listed files,
-remove them and then install so that the OS hooks into OpenRC.
-
-## Reporting Bugs
-
-If you are using Gentoo Linux, bugs can be filed on their bugzilla under
-the `gentoo hosted projects` product and the `openrc` component [1].
-Otherwise, you can report issues on our github [2].
-
-Better yet, if you can contribute code, please feel free to submit pull
-requests [3].
-
-## IRC Channel
-
-We have an official irc channel, #openrc on freenode, feel free to join
-us there.
-
-[1]	https://bugs.gentoo.org/
-[2]	https://github.com/openrc/openrc/issues
-[3]	https://github.com/openrc/openrc/pulls

README.newnet

@@ -1,36 +0,0 @@
-OpenRC Network Ideals
----------------------
-
-The new style networking for OpenRC is very simplistic - provide a basic means
-of configuring static interface address and routes whilst allowing the
-possibility to run any command at any point.
-
-In a nutshell, init.d/network is a wrapper around ifconfig(8) and
-init.d/staticroute is wrapper around route(8).
-
-In the Perfect World (TM) ifconfig should be able to configure everything
-about the interface easily * . The BSD family almost get this right and Linux
-epically fails.
-
-* Only static configuration, including link setup.
-For dynamic, static, IPv4LL, arping and per ssid IPv4 setup dhcpcd-5.x
-provides your needs.
-
-It fails because there are many tools to do the same job and often have
-vastly different syntax where they could be similar. In other words, there
-is no coherence.
-
-OpenRC-0.4.x and older (inc Gentoo baselayout-1) had a collection of scripts
-for each tool and allowed a script per interface. Over the years, this design
-has proven very hard to maintain as each user has their own idea of how
-things should work. Also, there were (and still are) race conditions.
-
-So where do we go from here?
-Well, it's possible to use the new network scripts using the tools
-currently available. It's just harder as you have to know them and their
-documentation can be lacking at times.
-The correct end goal is a BSD style ifconfig tool.
-I've started work on it, but the project has stalled somewhat.
-It's display only right now and the source is not yet publicly available.
-If you have the skills and share the vision then contact me privately and
-we'll take it from there.

STYLE-GUIDE.md

@@ -1,84 +0,0 @@
-# OpenRC Style Guide
-
-This is the openrc style manual.  It governs the coding style of all code
-in this repository.  Follow it.  Contact openrc@gentoo.org for any questions
-or fixes you might notice.
-
-## C CODE
-
-The BSD Kernel Normal Form (KNF) style is used [1]. Basically, it is like
-K&R/LKML, but wrapped lines that are indented use 4 spaces. Here are the
-highlights.
-
-- no trailing whitespace
-- indented code use tabs (not line wrapped)
-- cuddle the braces (except for functions)
-- space after native statements and before paren (for/if/while/...)
-- no space between function and paren
-- pointer asterisk cuddles the variable, not the type
-
-```
-void foo(int c)
-{
-	int ret = 0;
-
-	if (c > 1000)
-		return;
-
-	while (c--) {
-		bar(c);
-		ret++;
-	}
-
-	return ret;
-}
-```
-
-## COMMIT MESSAGES
-
-The following is an example of a correctly formatted git commit message
-for this repository. Most of this information came from this blog post
-[2], so I would like to thank the author.
-
-```
-Capitalized, short (50 chars or less) summary
-
-More detailed explanatory text, if necessary.  Wrap it to about 72
-characters or so.  In some contexts, the first line is treated as the
-subject of an email and the rest of the text as the body.  The blank
-line separating the summary from the body is critical (unless you omit
-the body entirely); tools like rebase can get confused if you run the
-two together.
-
-Write your commit message in the imperative: "Fix bug" and not "Fixed
-bug."  This convention matches up with commit messages generated by
-commands like git merge and git revert.
-
-Further paragraphs come after blank lines.
-
-- Bullet points are okay, too
-
-- Typically a hyphen or asterisk is used for the bullet, preceded by a
-  single space, with blank lines in between, but conventions vary here
-
-- Use a hanging indent
-
-Reported-by: User Name <email>
-X-[Distro]-Bug: BugID
-X-[Distro]-Bug-URL: URL for the bug (on the distribution's web site typically)
-```
-
-If you did not write the code and the patch does not include authorship
-information in a format git can use, please use the --author option of the
-git commit command to make the authorship correct.
-
-The Reported-by tag is required if the person who reported the bug is
-different from the author and committer.
-
-  The X-[Distro]-Bug/Bug-URL tags are required if this commit is related
-  to a bug reported to us by a specific distribution   of linux or a
-  *BSD. Also, [Distro] should be replaced with the name of the
-  distribution, e.g. X-Gentoo-Bug.
-
-[1]	http://en.wikipedia.org/wiki/Indent_style#BSD_KNF_style
-[2] http://tbaggery.com/2008/04/19/a-note-about-git-commit-messages.html

TODO

@@ -1,21 +1,3 @@
-- ensure all forks block, restore and unblock signals. needs review
+- ensure all forks block, restore and unblock signals. needs review 
 
 - add support somehow for optional translations
-
-- oldnet[bridging]: Review setting of bridge configuration on dynamic interface add
-
-- Document rc-depend binary.
-
-- _ifindex is not a reliable means of calculating metrics:
-	_ifindex is used for calculating metrics for new devices but has a major
-	problem: Since it's only the nth entry in /proc/net/dev
-	And devices may be removed from that file, and reordered, you won't always
-	get the same result.
-	If you do:
-	- add eth0 - _ifindex (eth0=0)
-	- add vlan1 - _ifindex (eth0=0,vlan1=1)
-	- add vlan2 - _ifindex (eth0=0,vlan1=1,vlan2=2)
-	- rem vlan1 - _ifindex (eth0=0,vlan2=1)
-	- add vlan3 - _ifindex (eth0=0,vlan2=1,vlan3=2)
-	Now your routing table has entries for both vlan2 and vlan3 with a metric of 2.
-

agetty-guide.md

@@ -1,18 +0,0 @@
-# Setting up the agetty service in OpenRC
-
-The agetty service is an OpenRC specific way to monitor and respawn a
-getty, using agetty, on Linux. To use this method, make sure you aren't
-spawning a getty manager for this port some other way (such as through
-sysvinit/inittab), then run the following commands as root.
-
-Note that [port] refers to the port you are spawning the getty on, for
-example, tty1 or ttyS0. The full path to it, for example, /dev/tty1
-should not be used.
-
-```
-# cd /etc/init.d
-# ln -s agetty agetty.[port]
-# cd /etc/conf.d
-# cp agetty agetty.[port]
-#rc-update add agetty.[port] [runlevel]
-```

conf.d/Makefile

@@ -1,20 +1,7 @@
-include ../mk/net.mk
-
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname localmount netmount swap urandom ${CONF-${OS}}
-
-ifeq (${MKNET},yes)
-CONF+= network staticroute
-endif
+CONF=	bootmisc fsck hostname local localmount net urandom
 
 MK=	../mk
 include ${MK}/os.mk
-
-CONF-FreeBSD=	ipfw modules moused powerd rarpd savecore syscons
-
-CONF-Linux=	agetty consolefont devfs dmesg hwclock keymaps killprocs modules \
-	mtab net-online
-
-CONF-NetBSD=	moused rarpd savecore
-
+include Makefile.${OS}
 include ${MK}/scripts.mk

conf.d/Makefile.FreeBSD

@@ -0,0 +1 @@
+CONF+=	ipfw moused powerd rarpd savecore syscons

conf.d/Makefile.Linux

@@ -0,0 +1 @@
+CONF+=	consolefont dmesg hwclock keymaps modules

conf.d/Makefile.NetBSD

@@ -0,0 +1 @@
+CONF+=	moused rarpd savecore

conf.d/adjkerntz

@@ -1,10 +1,10 @@
 # Set CLOCK to "UTC" if your system clock is set to UTC (also known as
-# Greenwich Mean Time).  If your clock is set to the local time, then
-# set CLOCK to "local".  Note that if you dual boot with Windows, then
+# Greenwich Mean Time).  If your clock is set to the local time, then 
+# set CLOCK to "local".  Note that if you dual boot with Windows, then 
 # you should set it to "local".
 clock="UTC"
 
-# If you want to set the Hardware Clock to the current System Time
+# If you want to set the Hardware Clock to the current System Time 
 # during shutdown, then say "YES" here.
 # You normally don't need to do this if you run a ntp daemon.
 clock_systohc="NO"

conf.d/agetty

@@ -1,8 +0,0 @@
-# Set the baud rate of the terminal line
-#baud=""
-
-# set the terminal type
-#term_type="linux"
-
-# extra options to pass to agetty for this port
-#agetty_options=""

conf.d/bootmisc

@@ -1,15 +1,6 @@
 # List of /tmp directories we should clean up
-clean_tmp_dirs="/tmp"
+wipe_tmp_dirs="/tmp"
 
 # Should we wipe the tmp paths completely or just selectively remove known
 # locks / files / etc... ?
 wipe_tmp="YES"
-
-# Write the initial dmesg log into /var/log/dmesg after boot
-# This may be useful if you need the kernel boot log afterwards
-log_dmesg="YES"
-
-# Save the previous dmesg log to dmesg.old
-# This may be useful if you need to compare the current boot to the
-# previous one.
-#previous_dmesg=no

conf.d/consolefont

@@ -1,10 +1,9 @@
-# The consolefont service is not activated by default. If you need to
-# use it, you should run "rc-update add consolefont boot" as root.
-#
 # consolefont specifies the default font that you'd like Linux to use on the
 # console.  You can find a good selection of fonts in /usr/share/consolefonts;
 # you shouldn't specify the trailing ".psf.gz", just the font name below.
 # To use the default console font, comment out the CONSOLEFONT setting below.
+# This setting is used by the /etc/init.d/consolefont script (NOTE: if you do
+# not want to use it, run "rc-update del consolefont" as root).
 consolefont="default8x16"
 
 # consoletranslation is the charset map file to use.  Leave commented to use

conf.d/devfs

@@ -1,8 +0,0 @@
-# OpenRC will attempt each of the following in succession to mount /dev.
-#
-# 1. If there is an entry for /dev in fstab, it will be used.
-# 2. If devtmpfs is defined in the kernel, it will be used.
-# 3. If tmpfs is defined in the kernel, it will be used.
-#
-# Set this to yes if you do not want OpenRC to attempt to mount /dev.
-# skip_mount_dev="NO"

conf.d/dmesg

@@ -1,3 +1,3 @@
 # Sets the level at which logging of messages is done to the
-# console.  See dmesg(1) for more info.
+# console.  See dmesg(8) for more info.
 dmesg_level="1"

conf.d/fsck

@@ -13,18 +13,6 @@
 #fsck_passno=">1"
 #fsck_passno="<2"
 
-# If passno is not enough granularity, you can also specify mountpoints to
-# check. This should NOT be used for the default non-multiplexed fsck, or your
-# system might not be checked. Additionally, it is mutually exclusive with
-# the fsck_passno setting.
-#fsck_mnt=""
-#fsck_mnt="/home"
-
-# Most modern fs's don't require a full fsck on boot, but for those that do
-# it may be advisable to skip this when running on battery.
-# WARNING: Do not turn this off if you have any JFS partitions.
-fsck_on_battery="YES"
-
 # fsck_shutdown causes fsck to trigger during shutdown as well as startup.
 # The end result of this is that if any periodic non-root filesystem checks are
 # scheduled, under normal circumstances the actual check will happen during
@@ -32,9 +20,3 @@ fsck_on_battery="YES"
 # This is useful when periodic filesystem checks are causing undesirable
 # delays at startup, but such delays at shutdown are acceptable.
 fsck_shutdown="NO"
-
-# fsck_abort_on_errors can be set to no to cause fsck to not abort on
-# errors.
-# This is useful when periodic filesystem checks are causing undesirable
-# aborts.
-fsck_abort_on_errors="YES"

conf.d/hwclock

@@ -1,19 +1,13 @@
-# Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
-# Greenwich Mean Time).  If that clock is set to the local time, then
-# set CLOCK to "local".  Note that if you dual boot with Windows, then
+# Set CLOCK to "UTC" if your system clock is set to UTC (also known as
+# Greenwich Mean Time).  If your clock is set to the local time, then 
+# set CLOCK to "local".  Note that if you dual boot with Windows, then 
 # you should set it to "local".
 clock="UTC"
 
-# If you want the hwclock script to set the system time (software clock)
-# to match the current hardware clock during bootup, leave this
-# commented out.
-# However, you can set this to "NO" if you are running a modern kernel
-# and using NTP to synchronize your system clock.
-#clock_hctosys="YES"
-
-# If you do not want to set the hardware clock to the current system
-# time (software clock) during shutdown, set this to no.
-#clock_systohc="YES"
+# If you want to set the Hardware Clock to the current System Time 
+# during shutdown, then say "YES" here.
+# You normally don't need to do this if you run a ntp daemon.
+clock_systohc="NO"
 
 # If you wish to pass any other arguments to hwclock during bootup,
 # you may do so here. Alpha users may wish to use --arc or --srm here.

conf.d/keymaps

@@ -1,23 +1,21 @@
-# Use keymap to specify the default console keymap.  There is a complete tree
+# Use KEYMAP to specify the default console keymap.  There is a complete tree
 # of keymaps in /usr/share/keymaps to choose from.
 keymap="us"
 
 # Should we first load the 'windowkeys' console keymap?  Most x86 users will
 # say "yes" here.  Note that non-x86 users should leave it as "no".
-# Loading this keymap will enable VT switching (like ALT+Left/Right)
-# using the special windows keys on the linux console.
 windowkeys="NO"
 
 # The maps to load for extended keyboards.  Most users will leave this as is.
 extended_keymaps=""
 #extended_keymaps="backspace keypad euro2"
 
-# Tell dumpkeys(1) to interpret character action codes to be
+# Tell dumpkeys(1) to interpret character action codes to be 
 # from the specified character set.
 # This only matters if you set unicode="yes" in /etc/rc.conf.
 # For a list of valid sets, run `dumpkeys --help`
 dumpkeys_charset=""
 
-# Some fonts map AltGr-E to the currency symbol instead of the Euro.
+# Some fonts map AltGr-E to the currency symbol ¤ instead of the Euro €
 # To fix this, set to "yes"
 fix_euro="NO"

conf.d/killprocs

@@ -1,6 +0,0 @@
-# If you wish to pass any options to kill_all during shutdown,
-# you should do so here.
-#
-# The setting is called killall5_opts because the options here are meant
-# to be identical to those you could pass to killall5.
-killall5_opts=""

conf.d/local

@@ -0,0 +1,18 @@
+# Here is where you can put anything you need to start
+# that there is not an init script for.
+
+local_start() {
+	# This is a good place to load any misc programs
+	# on startup (use &>/dev/null to hide output)
+
+	# We should always return 0
+	return 0
+}
+
+local_stop() {
+	# This is a good place to unload any misc.
+	# programs you started above.
+	
+	# We should always return 0
+	return 0
+}

conf.d/localmount

@@ -1,10 +1,3 @@
 # Stop the unmounting of certain points.
 # This could be useful for some NFS related work.
 #no_umounts="/dir1:/var/dir2"
-#
-# Mark certain mount points as critical.
-# This contains aspace separated list of mount points which should be
-# considered critical. If one of these mount points cannot be mounted,
-# localmount will fail.
-# By default, this is empty.
-#critical_mounts="/home /var"

conf.d/modules

@@ -1,27 +1,19 @@
-# Linux users can define a list of modules for a specific kernel version,
-# a released kernel version, a main kernel version or all kernel versions.
-# The most specific versioned variable will take precedence.
-# FreeBSD users can only use the modules="foo bar" setting.
+# You can define a list modules for a specific kernel version,
+# a released kernel version, a main kernel version or just a list.
 #modules_2_6_23_gentoo_r5="ieee1394 ohci1394"
 #modules_2_6_23="tun ieee1394"
 #modules_2_6="tun"
-#modules_2="ipv6"
 #modules="ohci1394"
 
-# Linux users can give modules a different name when they load - the new name
+# You can give modules a different name when they load - the new name
 # will also be used to pick arguments below.
-# This is not supported on FreeBSD.
 #modules="dummy:dummy1"
 
-# Linux users can give the modules some arguments if needed, per version
-# if necessary.
-# Again, the most specific versioned variable will take precedence.
-# This is not supported on FreeBSD.
+# Give the modules some arguments if needed, per version if necessary.
 #module_ieee1394_args="debug"
-#module_ieee1394_args_2_6_23_gentoo_r5="debug2"
-#module_ieee1394_args_2_6_23="debug3"
-#module_ieee1394_args_2_6="debug4"
-#module_ieee1394_args_2="debug5"
+#module_ieee1394_args_2_6_23_gentoo_r5="ieee1394 ohci1394"
+#module_ieee1394_args_2_6_23="tun ieee1394"
+#module_ieee1394_args_2_6="tun"
 
 # You should consult your kernel documentation and configuration
 # for a list of modules and their options.

conf.d/moused

@@ -11,6 +11,6 @@
 
 # You can also multiplex the init script for each device like so
 #   ln -s moused /etc/init.d/moused.ums0
-# This enables you to have a config file per mouse (forces moused_device
+# This enables you to have a config file per mouse (forces moused_device 
 # to ums0 in this case) and control each mouse.
 # devd can also start and stop these mice, which laptop users will find handy.

conf.d/mtab

@@ -1,5 +0,0 @@
-# This setting controls whether /etc/mtab is a file or symbolic link.
-# Most of the time, you shouldn't touch this. However, if the default
-# breaks your system in some way, please see the NEWS.md file that comes
-# with OpenRC for the actions to take.
-# mtab_is_file=no

conf.d/net

@@ -0,0 +1,4 @@
+# This blank configuration will automatically use DHCP for any net.*
+# scripts in /etc/init.d.  To create a more complete configuration,
+# please review /usr/share/doc/openrc/net.example and save your configuration
+# in /etc/conf.d/net (this file :]!).

conf.d/net-online

@@ -1,18 +0,0 @@
-# The interfaces setting controls which interfaces the net-online
-# service considers in deciding whether the network is active. The
-# default is all interfaces that support ethernet.
-#interfaces=""
-
-# This setting controls whether a ping test is included in the test for
-# network connectivity after all interfaces are active.
-#include_ping_test=no
-
-# This setting is the host to attempt to ping if the above is yes.
-# The default is google.com.
-#ping_test_host=some.host.name
-
-# The timeout setting controls how long the net-online service waits
-# for the network to be configured.
-# The default is 120 seconds.
-# if this is set to 0, the wait is infinite.
-#timeout=120

conf.d/netmount

@@ -1,47 +0,0 @@
-# You will need to set the dependencies in the netmount script to match
-# the network configuration tools you are using. This should be done in
-# this file by following the examples below, and not by changing the
-# service script itself.
-#
-# Each of these examples is meant to be used separately. So, for
-# example, do not set rc_need to something like "net.eth0 dhcpcd".
-#
-# If you are using newnet and configuring your interfaces with static
-# addresses with the network script, you  should use this setting.
-#
-#rc_need="network"
-#
-# If you are using oldnet, you must list the specific net.* services you
-# need.
-#
-# This example assumes all of your netmounts can be reached on
-# eth0.
-#
-#rc_need="net.eth0"
-#
-# This example assumes some of your netmounts are on eth1 and some
-# are on eth2.
-#
-#rc_need="net.eth1 net.eth2"
-#
-# If you are using a dynamic network management tool like
-# NetworkManager, dhcpcd in standalone mode, wicd, badvpn-ncd, etc, to
-# manage the network interfaces with the routes to your netmounts, you
-# should list that tool.
-#
-#rc_need="NetworkManager"
-#rc_need="dhcpcd"
-#rc_need="wicd"
-#
-# The default setting is designed to be backward compatible with our
-# current setup, but you are highly discouraged from using this. In
-# other words, please change it to be more suited to your system.
-#
-rc_need="net"
-#
-# Mark certain mount points as critical.
-# This contains aspace separated list of mount points which should be
-# considered critical. If one of these mount points cannot be mounted,
-# netmount will fail.
-# By default, this is empty.
-#critical_mounts="/home /var"

conf.d/network

@@ -1,80 +0,0 @@
-# Assign static IP addresses and run custom scripts per interface.
-# Seperate commands with ;
-# Prefix with ! to run a shell script.
-# Use \$int to represent the interface
-#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
-
-# You also have ifup_eth0 and ifdown_eth0 to run other commands when
-# eth0 is started and stopped.
-# You should note that we don't stop the network at system shutdown by default.
-# If you really need this, then set keep_network=NO
-
-# Lastly, the interfaces variable pulls in virtual interfaces that cannot
-# be automatically detected.
-#interfaces="br0 bond0 vlan0"
-
-# You can also use files instead of variables here if you like:
-# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0
-# /etc/ip.eth0 is equivalent to ifconfig_eth0
-# /etc/ifup.eth0 is equivalent to ifup_eth0
-# /etc/ifdown.eth0 is equivalent to ifdown_eth0
-# Any files found will automatically be put into the interfaces variable.
-# You don't need to escape variables in files, so use $int instead of \$int.
-
-# If you require DHCP, you should install dhcpcd and add it to the boot or
-# default runlevel.
-
-# NIS users can set the domain name here
-#domainname="foobar"
-
-# You can add a default route.
-# The way this is done is slightly different depending on the operating system.
-#
-# *BSD:
-#defaultroute="192.168.0.1"
-#defaultroute6="2001:a:b:c"
-#Hurd/Linux (ifconfig):
-#defaultroute="gw 192.168.0.1"
-#defaultroute6="gw 2001:a:b:c"
-
-# The remainder of this file applies to Linux only and shows how
-# iproute2 is supported along with other examples.
-
-# ifconfig under Linux is not that powerful and doesn't easily handle
-# multiple addresses
-# On the other hand, iproute2 is quite powerful and is also supported
-#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
-
-# You can also use iproute2 to add the default route.
-#defaultiproute="via 192.168.0.1"
-#defaultiproute6="via 2001:a:b:c"
-
-# ip doesn't handle MTU like ifconfig, but we can do it like so
-#ifup_eth0="ip link set \$int mtu 1500"
-
-# Create a bonded interface
-#interfaces="bond0"
-#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
-#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
-#ifdown_bond0="rmmod bonding"
-
-# Create tap interface and a bridge interface.
-# We add the tap to the bridge.
-# An external program, like dhcpcd, will configure the IP on the bridge
-#interfaces="tun0 br0"
-#ifup_tun0="tunctl -t \$int"
-#ifdown_tun0="tunctl -d \$int"
-#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
-#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
-
-# Create VLAN
-#interfaces="eth0_2 eth0_3 eth0_4"
-#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
-#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
-#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
-#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
-#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
-
-# Normally you would use wpa_supplicant to configure wireless, but you can
-# use iwconfig also
-#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

conf.d/staticroute

@@ -1,26 +0,0 @@
-# Static routes are defined differently depending on your operating
-# system, so please be sure to use the correct syntax.
-# Do not use this file to define the default route.
-# In all settings, multiple routes should be separated using ; or new lines.
-
-# Define static routes on Linux using route. See route(8) for syntax.
-#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
-#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
-
-# Define static routes on Linux using iproute2. See ip(8) for syntax.
-#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"
-
-# Define static routes on GNU/Hurd. See route(8) for syntax.
-# /etc/route.conf(5) takes precedence over this configuration.
-# FIXME: "net ..." not supported
-#staticroute="net 192.168.0.0 -netmask 255.255.255.0 --address 10.73.1.1
-#net 192.168.1.0 -netmask 255.255.255.0 --address 10.73.1.1"
-
-# Define static routes on GNU/KFreeBSD. See route(8) for syntax.
-#staticroute="net 192.168.0.0 10.73.1.1 netmask 255.255.255.0
-#net 192.168.1.0 10.73.1.1 netmask 255.255.255.0"
-
-# Define static routes on other BSD systems. See route(8) for syntax.
-# /etc/route.conf(5) takes precedence over this configuration.
-#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
-#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/swap

@@ -1,13 +0,0 @@
-# If you are only using local swap partitions, you should not change
-# this file. Otherwise, you need to uncomment the below rc_before line
-# followed by the appropriate rc_need line.
-#rc_before="!localmount"
-#
-# If you are using swap files stored on local file systems, uncomment
-# this line.
-#rc_need="localmount"
-#
-# If you are using swap files stored on network file systems or swap
-# partitions stored on network block devices such as iSCSI, uncomment
-# this line.
-#rc_need="netmount"

conf.d/urandom

@@ -2,4 +2,4 @@
 # (say for crypt swap), so you will need to customize this
 # behavior.  If you have /var on a separate partition, then
 # make sure this path lives on your root device somewhere.
-urandom_seed="/var/lib/misc/random-seed"
+urandom_seed="/var/run/random-seed"

doc/Makefile

@@ -0,0 +1,7 @@
+DIR=	${DOCDIR}/openrc
+INC=	net.example
+
+MK=	../mk
+include ${MK}/os.mk
+include Makefile.${OS}
+include ${MK}/scripts.mk

doc/Makefile.FreeBSD

@@ -0,0 +1,5 @@
+SRCS+=		net.example.in
+
+.SUFFIXES:	.BSD.in
+.BSD.in:
+	${CP} $< $@

doc/Makefile.Linux

@@ -0,0 +1,5 @@
+SRCS+=		net.example.in
+
+.SUFFIXES:	.Linux.in
+.Linux.in:
+	${CP} $< $@

doc/Makefile.NetBSD

@@ -0,0 +1,5 @@
+SRCS+=		net.example.in
+
+.SUFFIXES:	.BSD.in
+.BSD.in:
+	${CP} $< $@

doc/net.example.BSD.in

@@ -0,0 +1,434 @@
+##############################################################################
+# QUICK-START
+#
+# The quickest start is if you want to use DHCP.
+# In that case, everything should work out of the box, no configuration
+# necessary, though the startup script will warn you that you haven't
+# specified anything.
+
+# WARNING :- some examples have a mixture of IPv4 (ie 192.168.0.1) and IPv6
+# (ie 4321:0:1:2:3:4:567:89ab) internet addresses. They only work if you have
+# the relevant kernel option enabled. So if you don't have an IPv6 enabled
+# kernel then remove the IPv6 address from your config.
+
+# If you want to use a static address or use DHCP explicitly, jump
+# down to the section labelled INTERFACE HANDLERS.
+#
+# If you want to do anything more fancy, you should take the time to
+# read through the rest of this file.
+
+##############################################################################
+# MODULES
+#
+# We now support modular networking scripts which means we can easily
+# add support for new interface types and modules while keeping
+# compatability with existing ones.
+# 
+# Modules load by default if the package they need is installed.  If
+# you specify a module here that doesn't have it's package installed
+# then you get an error stating which package you need to install.
+# Ideally, you only use the modules setting when you have two or more
+# packages installed that supply the same service.
+#
+# In other words, you probably should DO NOTHING HERE...
+
+##############################################################################
+# INTERFACE HANDLERS
+
+# For a static configuration, use something like this
+#config_eth0="192.168.0.2/24"
+
+# If you need more than one address, you can use something like this
+# NOTE: ifconfig creates an aliased device for each extra IPv4 address
+#       (eth0:1, eth0:2, etc)
+#       iproute2 does not do this as there is no need to
+#config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
+# Or you can use sequence expressions
+#config_eth0="192.168.0.{2..4}/24"  FIXME - may not work with baselayout2
+# which does the same as above. Be careful though as if you use this and
+# fallbacks, you have to ensure that both end up with the same number of
+# values otherwise your fallback won't work correctly.
+
+# You can also use IPv6 addresses
+# (you should always specify a prefix length with IPv6 here)
+#config_eth0="192.168.0.2/24 4321:0:1:2:3:4:567:89ab/64 4321:0:1:2:3:4:567:89ac/64"
+
+# If you wish to keep existing addresses + routing and the interface is up,
+# you can specify a noop (no operation). If the interface is down or there
+# are no addresses assigned, then we move onto the next step (default dhcp)
+# This is useful when configuring your interface with a kernel command line
+# or similar
+#config_eth0="noop 192.168.0.2/24"
+
+# If you don't want ANY address (only useful when calling for advanced stuff)
+#config_eth0="null"
+
+# Here's how to do routing if you need it
+# We add an IPv4 default route, IPv4 subnet route and an IPv6 unicast route
+#routes_eth0="default via 192.168.0.1
+#10.0.0.0/8 via 192.168.0.1
+#::/0"
+
+# If a specified module fails (like dhcp - see below), you can specify a
+# fallback like so
+#fallback_eth0="192.168.0.2 netmask 255.255.255.0"
+#fallback_route_eth0="default via 192.168.0.1"
+
+# NOTE: fallback entry must match the entry location in config_eth0
+# As such you can only have one fallback route.
+
+# Some users may need to alter the MTU - here's how
+#mtu_eth0="1500"
+
+# Most drivers that report carrier status function correctly, but some do not
+# One of these faulty drivers is for the Intel e1000 network card, but only
+# at boot time. To get around this you may alter the carrier_timeout value for
+# the interface. -1 is disable, 0 is infinite and any other number of seconds
+# is how long we wait for carrier. The current default is 3 seconds
+#carrier_timeout_eth0=-1
+
+# You may wish to disable the interface being brought down when stopping.
+# This is only of use for WakeOnLan.
+#ifdown_eth0="NO"
+
+##############################################################################
+# OPTIONAL MODULES
+
+#-----------------------------------------------------------------------------
+# WIRELESS (802.11 support)
+# Wireless can be provided by BSDs ifconfig (iwconfig) or wpa_supplicant
+# wpa_supplicant is preferred, use the modules directive to prefer iwconfig.
+#modules="iwconfig"
+
+# ifconfig (iwconig) support is a one shot script - wpa_supplicant is daemon
+# that scans, assoicates and re-configures if assocation is lost.
+# We call it iwconfig to seperate the wireless setup from ifconfig.
+####################################
+# HINTS
+#
+# Most users will just need to set the following options
+# key_SSID1="s:yourkeyhere enc open" # s: means a text key
+# key_SSID2="aaaa-bbbb-cccc-dd"      # no s: means a hex key
+# preferred_aps="SSID1 SSID2"
+#
+# Clear? Good. Now configure your wireless network below
+
+####################################
+# SETTINGS
+# Hard code an SSID to an interface - leave this unset if you wish the driver
+# to scan for available Access Points
+# I would only set this as a last resort really - use the preferred_aps
+# setting at the bottom of this file
+#essid_eth0='foo'
+
+# Some drivers/hardware don't scan all that well. We have no control over this
+# but we can say how many scans we want to do to try and get a better sweep of
+# the area. The default is 1.
+#scans_eth0="1"
+
+#Channel can be set (1-14), but defaults to 3 if not set.
+#
+# The below is taken verbatim from the BSD wavelan documentation found at
+# http://www.netbsd.org/Documentation/network/wavelan.html
+# There are 14 channels possible; We are told that channels 1-11 are legal for
+# North America, channels 1-13 for most of Europe, channels 10-13 for France,
+# and only channel 14 for Japan. If in doubt, please refer to the documentation
+# that came with your card or access point. Make sure that the channel you
+# select is the same channel your access point (or the other card in an ad-hoc
+# network) is on. The default for cards sold in North America and most of Europe
+# is 3; the default for cards sold in France is 11, and the default for cards
+# sold in Japan is 14.
+#channel_eth0="3"
+
+# Setup any other config commands. This is basically the ifconfig argument
+# without the ifconfig $iface.
+#ifconfig_eth0=""
+# You can do the same per SSID too.
+#ifconfig_SSID=""
+
+# Seconds to wait until associated. The default is to wait 10 seconds.
+# 0 means wait indefinitely. WARNING: this can cause an infinite delay when
+# booting.
+#associate_timeout_eth0="5"
+
+# Define a WEP key per SSID or MAC address (of the AP, not your card)
+# The encryption type (open or restricted) must match the
+# encryption type on the Access Point.
+# To set a hex key, prefix with 0x
+#key_SSID="0x12341234123412341234123456"
+# or you can use strings. Passphrase IS NOT supported
+#key_SSID="foobar"
+#key_SSID="foobar"
+
+# WEP key for the AP with MAC address 001122334455
+#mac_key_001122334455="foobar"
+
+# You can also override the interface settings found in /etc/conf.d/net
+# per SSID - which is very handy if you use different networks a lot
+#config_SSID="dhcp"
+#routes_SSID=
+#fallback_SSID=
+
+# Setting name/domain server causes /etc/resolv.conf to be overwritten
+# Note that if DHCP is used, and you want this to take precedence then
+# please put -R in your dhcpcd options
+#dns_servers_SSID="192.168.0.1 192.168.0.2"
+#dns_domain_SSID="some.domain"
+#dns_search_SSID="search.this.domain search.that.domain"
+# Please check the man page for resolv.conf for more information
+# as domain and search (searchdomains) are mutually exclusive and
+# searchdomains takes precedence
+
+# You can also set any of the /etc/conf.d/net variables per MAC address
+# incase you use Access Points with the same SSID but need different
+# networking configs. Below is an example - of course you use the same
+# method with other variables
+#config_001122334455="dhcp"
+#dns_servers_001122334455="192.168.0.1 192.168.0.2"
+
+# Map a MAC address to an SSID
+# This is used when the Access Point is not broadcasting it's SSID
+# WARNING: This will override the SSID being broadcast due to some
+# Access Points sending an SSID even when they have been configured
+# not to!
+# Change 001122334455 to the MAC address and SSID to the SSID
+# it should map to
+#mac_essid_001122334455="SSID"
+
+# This lists the preferred SSIDs to connect to in order
+# SSID's can contain any characters here as they must match the broadcast
+# SSID exactly.
+# Surround each SSID with the " character and seperate them with a space
+# If the first SSID isn't found then it moves onto the next
+# If this isn't defined then it connects to the first one found
+#preferred_aps="SSID1 SSID2"
+
+# You can also define a preferred_aps list per interface
+#preferred_aps_eth0="SSID3 SSID4"
+
+# You can also say whether we only connect to preferred APs or not
+# Values are "any", "preferredonly", "forcepreferred", "forcepreferredonly"
+# and "forceany"
+# "any" means it will connect to visible APs in the preferred list and then
+# any other available AP
+# "preferredonly" means it will only connect to visible APs in the preferred
+# list
+# "forcepreferred" means it will forceably connect to APs in order if it does
+# not find them in a scan
+# "forcepreferredonly" means it forceably connects to the APs in order and
+# does not bother to scan
+# "forceany" does the same as forcepreferred + connects to any other 
+# available AP
+# Default is "any"
+#associate_order="any"
+#associate_order_eth0="any"
+
+# You can define blacklisted Access Points in the same way
+#blacklist_aps="SSID1 SSID2"
+#blacklist_aps_eth0="SSID3 SSID4"
+
+# If you have more than one wireless card, you can say if you want
+# to allow each card to associate with the same Access Point or not
+# Values are "yes" and "no"
+# Default is "yes"
+#unique_ap="yes"
+#unique_ap_eth0="yes"
+
+# IMPORTANT: preferred_only, blacklisted_aps and unique_ap only work when
+# essid_eth0 is not set and your card is capable of scanning
+
+# NOTE: preferred_aps  list ignores blacklisted_aps - so if you have
+# the same SSID in both, well, you're a bit silly :p
+
+##################################################
+# wpa_supplicant
+# emerge net-wireless/wpa-supplicant
+# Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
+# Console the wpa_supplicant.conf.example that is installed in
+# /usr/share/doc/wpa_supplicant
+
+# By default we don't wait for wpa_suppliant to associate and authenticate.
+# If you would like to, so can specify how long in seconds
+#associate_timeout_eth0=60
+# A value of 0 means wait forever.
+
+# You can also override any settings found here per SSID - which is very
+# handy if you use different networks a lot. See below for using the SSID
+# in our variables
+#config_SSID="dhcp"
+# See the System module below for setting dns/nis/ntp per SSID
+
+# You can also override any settings found here per MAC address of the AP
+# in case you use Access Points with the same SSID but need different
+# networking configs. Below is an example - of course you use the same
+# method with other variables
+#mac_config_001122334455="dhcp"
+#mac_dns_servers_001122334455="192.168.0.1 192.168.0.2"
+
+# When an interface has been associated with an Access Point, a global
+# variable called SSID is set to the Access Point's SSID for use in the
+# pre/post user functions below (although it's not available in preup as you
+# won't have associated then)
+
+# If you're using anything else to configure wireless on your interface AND
+# you have installed wpa_supplicant, you need to disable wpa_supplicant 
+#modules="!iwconfig !wpa_supplicant"
+#or
+#modules="!wireless"
+
+##############################################################################
+# WIRELESS SSID IN VARIABLES 
+##############################################################################
+# Remember to change SSID to your SSID.
+# Say that your SSID is My NET - the line
+#      #key_SSID="s:passkey"
+# becomes
+#      #key_My_NET="s:passkey"
+# Notice that the space has changed to an underscore - do the same with all
+# characters not in a-z A-Z (English alphabet) 0-9. This only applies to
+# variables and not values.
+#
+# Any SSID's in values like essid_eth0="My NET" may need to be escaped
+# This means placing the character \ before the character
+# \" need to be escaped for example
+# So if your SSID is
+#      My "\ NET
+# it becomes
+#      My \"\\ NET
+# for example
+#      #essid_eth0="My\"\\NET"
+#
+# So using the above we can use
+#      #dns_domain_My____NET="My\"\\NET"
+# which is an invalid dns domain, but shows the how to use the variable
+# structure
+#########################################################
+
+#-----------------------------------------------------------------------------
+# DHCP
+# DHCP can be provided by dhclient.
+#
+# dhcpcd:   emerge net-misc/dhcpcd
+# dhclient: emerge net-misc/dhcp
+
+# Regardless of which DHCP client you prefer, you configure them the
+# same way using one of following depending on which interface modules
+# you're using.
+#config_eth0="dhcp"
+
+# For passing custom options to dhcpcd use something like the following.  This
+# example reduces the timeout for retrieving an address from 60 seconds (the
+# default) to 10 seconds.
+#dhcpcd_eth0="-t 10"
+
+# GENERIC DHCP OPTIONS
+# Set generic DHCP options like so
+#dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
+
+# This tells the dhcp client to release it's lease when it stops, not to
+# overwrite dns, ntp and nis settings, not to set a default route and not to
+# send the current hostname to the dhcp server and when it starts.
+# You can use any combination of the above options - the default is not to
+# use any of them.
+
+
+#-----------------------------------------------------------------------------
+# System
+# For configuring system specifics such as domain, dns, ntp and nis servers
+# It's rare that you would need todo this, but you can anyway.
+# This is most benefit to wireless users who don't use DHCP so they can change
+# their configs based on SSID.
+
+# If you omit the _eth0 suffix, then it applies to all interfaces unless
+# overridden by the interface suffix.
+#dns_domain_eth0="your.domain"
+#dns_servers_eth0="192.168.0.2 192.168.0.3"
+#dns_search_eth0="this.domain that.domain"
+#dns_options_eth0="timeout:1 rotate"
+#dns_sortlist_eth0="130.155.160.0/255.255.240.0 130.155.0.0"
+# See the man page for resolv.conf for details about the options and sortlist
+# directives
+
+#ntp_servers_eth0="192.168.0.2 192.168.0.3"
+
+#nis_domain_eth0="domain"
+#nis_servers_eth0="192.168.0.2 192.168.0.3"
+
+# NOTE: Setting any of these will stamp on the files in question. So if you
+# don't specify dns_servers but you do specify dns_domain then no nameservers
+# will be listed in /etc/resolv.conf even if there were any there to start
+# with.
+# If this is an issue for you then maybe you should look into a resolv.conf
+# manager like resolvconf-gentoo to manage this file for you. All packages
+# that baselayout supports use resolvconf-gentoo if installed.
+
+#-----------------------------------------------------------------------------
+# Cable in/out detection
+# Sometimes the cable is in, others it's out. Obviously you don't want to
+# restart net.eth0 every time when you plug it in either.
+# BSD has the Device State Change Daemon - or devd for short
+# To enable this,  simple add devd to the boot runlevel
+#rc-update add devd boot
+#rc
+
+##############################################################################
+# ADVANCED CONFIGURATION
+# 
+# Four functions can be defined which will be called surrounding the
+# start/stop operations.  The functions are called with the interface
+# name first so that one function can control multiple adapters. An extra two
+# functions can be defined when an interface fails to start or stop.
+#
+# The return values for the preup and predown functions should be 0
+# (success) to indicate that configuration or deconfiguration of the
+# interface can continue.  If preup returns a non-zero value, then
+# interface configuration will be aborted.  If predown returns a
+# non-zero value, then the interface will not be allowed to continue
+# deconfiguration.
+#
+# The return values for the postup, postdown, failup and faildown functions are
+# ignored since there's nothing to do if they indicate failure.
+#
+# ${IFACE} is set to the interface being brought up/down
+# ${IFVAR} is ${IFACE} converted to variable name bash allows
+
+#preup() {
+#	# Remember to return 0 on success
+#	return 0
+#}
+
+#predown() {
+#	# The default in the script is to test for NFS root and disallow
+#	# downing interfaces in that case.  Note that if you specify a
+#	# predown() function you will override that logic.  Here it is, in
+#	# case you still want it...
+#	if is_net_fs /; then
+#		eerror "root filesystem is network mounted -- can't stop ${IFACE}"
+#		return 1
+#	fi
+#
+#	# Remember to return 0 on success
+#	return 0
+#}
+
+#postup() {
+#	# This function could be used, for example, to register with a
+#	# dynamic DNS service.  Another possibility would be to
+#	# send/receive mail once the interface is brought up.
+
+#}
+
+#postdown() {
+#	# Return 0 always
+#	return 0
+#}
+
+#failup() {
+#       # This function is mostly here for completeness... I haven't
+#       # thought of anything nifty to do with it yet ;-)
+#}
+
+#faildown() {
+#       # This function is mostly here for completeness... I haven't
+#       # thought of anything nifty to do with it yet ;-)
+#}

etc/.gitignore

@@ -1,2 +0,0 @@
-rc
-rc.shutdown

etc/Makefile

@@ -1,23 +1,9 @@
 DIR=	${SYSCONFDIR}
-SRCS=	rc.in rc.shutdown.in
-BIN=	${BIN-${OS}}
-CONF=	rc.conf ${BIN-${OS}}
+CONF=	rc.conf
+
+CLEANFILES+=	rc.conf
 
 MK=	../mk
 include ${MK}/os.mk
-
-SED_EXTRA-FreeBSD=	-e 's:@TERM@:cons25:g'
-BIN-FreeBSD=		rc rc.shutdown rc.devd
-CONF-FreeBSD=		devd.conf
-
-SED_EXTRA-Linux=	-e 's:@TERM@:wsvt25:g'
-BIN-Linux=
-CONF-Linux=
-
-SED_EXTRA-NetBSD=	-e 's:@TERM@:wsvt25:g'
-BIN-NetBSD=		rc rc.shutdown
-CONF-NetBSD=
-
-SED_EXTRA=	${SED_EXTRA-${OS}}
-
+include Makefile.${OS}
 include ${MK}/scripts.mk

etc/Makefile.FreeBSD

@@ -0,0 +1,4 @@
+SED_EXTRA=	-e 's:@TERM@:cons25:g'
+SRCS+=		rc.conf.in rc.in rc.shutdown.in
+CONF+=		devd.conf
+BIN+=		rc rc.shutdown rc.devd

etc/Makefile.Linux

@@ -0,0 +1,6 @@
+SED_EXTRA=	-e 's:@TERM@:wsvt25:g'
+SRCS+=		rc.in rc.shutdown.in
+
+rc.conf:
+	cp rc.conf.in rc.conf
+	cat rc.conf.Linux >> rc.conf

etc/Makefile.NetBSD

@@ -0,0 +1,3 @@
+SED_EXTRA=	-e 's:@TERM@:wsvt25:g'
+SRCS+=		rc.conf.in rc.in rc.shutdown.in
+BIN+=		rc rc.shutdown

etc/rc.conf

@@ -1,255 +0,0 @@
-# Global OpenRC configuration settings
-
-# Set to "YES" if you want the rc system to try and start services
-# in parallel for a slight speed improvement. When running in parallel we
-# prefix the service output with its name as the output will get
-# jumbled up.
-# WARNING: whilst we have improved parallel, it can still potentially lock
-# the boot process. Don't file bugs about this unless you can supply
-# patches that fix it without breaking other things!
-#rc_parallel="NO"
-
-# Set rc_interactive to "YES" and you'll be able to press the I key during
-# boot so you can choose to start specific services. Set to "NO" to disable
-# this feature. This feature is automatically disabled if rc_parallel is
-# set to YES.
-#rc_interactive="YES"
-
-# If we need to drop to a shell, you can specify it here.
-# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
-# otherwise /bin/sh
-# Linux users could specify /sbin/sulogin
-#rc_shell=/bin/sh
-
-# Do we allow any started service in the runlevel to satisfy the dependency
-# or do we want all of them regardless of state? For example, if net.eth0
-# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
-# both will be started, but services that depend on 'net' will work if either
-# one comes up. With rc_depend_strict="YES" we would require them both to
-# come up.
-#rc_depend_strict="YES"
-
-# rc_hotplug controls which services we allow to be hotplugged.
-# A hotplugged service is one started by a dynamic dev manager when a matching
-# hardware device is found.
-# Hotplugged services appear in the "hotplugged" runlevel.
-# If rc_hotplug is set to any value, we compare the name of this service
-# to every pattern in the value, from left to right, and we allow the
-# service to be hotplugged if it matches a pattern, or if it matches no
-# patterns. Patterns can include shell wildcards.
-# To disable services from being hotplugged, prefix patterns with "!".
-#If rc_hotplug is not set or is empty, all hotplugging is disabled.
-# Example - rc_hotplug="net.wlan !net.*"
-# This allows net.wlan and any service not matching net.* to be hotplugged.
-# Example - rc_hotplug="!net.*"
-# This allows services that do not match "net.*" to be hotplugged.
-
-# rc_logger launches a logging daemon to log the entire rc process to
-# /var/log/rc.log
-# NOTE: Linux systems require the devfs service to be started before
-# logging can take place and as such cannot log the sysinit runlevel.
-#rc_logger="NO"
-
-# Through rc_log_path you can specify a custom log file.
-# The default value is: /var/log/rc.log
-#rc_log_path="/var/log/rc.log"
-
-# If you want verbose output for OpenRC, set this to yes. If you want
-# verbose output for service foo only, set it to yes in /etc/conf.d/foo.
-#rc_verbose=no
-
-# By default we filter the environment for our running scripts. To allow other
-# variables through, add them here. Use a * to allow all variables through.
-#rc_env_allow="VAR1 VAR2"
-
-# By default we assume that all daemons will start correctly.
-# However, some do not - a classic example is that they fork and return 0 AND
-# then child barfs on a configuration error. Or the daemon has a bug and the
-# child crashes. You can set the number of milliseconds start-stop-daemon
-# waits to check that the daemon is still running after starting here.
-# The default is 0 - no checking.
-#rc_start_wait=100
-
-# rc_nostop is a list of services which will not stop when changing runlevels.
-# This still allows the service itself to be stopped when called directly.
-#rc_nostop=""
-
-# rc will attempt to start crashed services by default.
-# However, it will not stop them by default as that could bring down other
-# critical services.
-#rc_crashed_stop=NO
-#rc_crashed_start=YES
-
-# Set rc_nocolor to yes if you do not want colors displayed in OpenRC
-# output.
-#rc_nocolor=NO
-
-##############################################################################
-# MISC CONFIGURATION VARIABLES
-# There variables are shared between many init scripts
-
-# Set unicode to YES to turn on unicode support for keyboards and screens.
-#unicode="NO"
-
-# This is how long fuser should wait for a remote server to respond. The
-# default is 60 seconds, but  it can be adjusted here.
-#rc_fuser_timeout=60
-
-# Below is the default list of network fstypes.
-#
-# afs ceph cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
-# nfs nfs4 ocfs2 shfs smbfs
-#
-# If you would like to add to this list, you can do so by adding your
-# own fstypes to the following variable.
-#extra_net_fs_list=""
-
-##############################################################################
-# SERVICE CONFIGURATION VARIABLES
-# These variables are documented here, but should be configured in
-# /etc/conf.d/foo for service foo and NOT enabled here unless you
-# really want them to work on a global basis.
-# If your service has characters in its name which are not legal in
-# shell variable names and you configure the variables for it in this
-# file, those characters should be replaced with underscores in the
-# variable names as shown below.
-
-# Some daemons are started and stopped via start-stop-daemon.
-# We can set some things on a per service basis, like the nicelevel.
-#SSD_NICELEVEL="-19"
-# Or the ionice level. The format is class[:data] , just like the
-# --ionice start-stop-daemon parameter.
-#SSD_IONICELEVEL="2:2"
-
-# Pass ulimit parameters
-# If you are using bash in POSIX mode for your shell, note that the
-# ulimit command uses a block size of 512 bytes for the -c and -f
-# options
-#rc_ulimit="-u 30"
-
-# It's possible to define extra dependencies for services like so
-#rc_config="/etc/foo"
-#rc_need="openvpn"
-#rc_use="net.eth0"
-#rc_after="clock"
-#rc_before="local"
-#rc_provide="!net"
-
-# You can also enable the above commands here for each service. Below is an
-# example for service foo.
-#rc_foo_config="/etc/foo"
-#rc_foo_need="openvpn"
-#rc_foo_after="clock"
-
-# Below is an example for service foo-bar. Note that the '-' is illegal
-# in a shell variable name, so we convert it to an underscore.
-# example for service foo-bar.
-#rc_foo_bar_config="/etc/foo-bar"
-#rc_foo_bar_need="openvpn"
-#rc_foo_bar_after="clock"
-
-# You can also remove dependencies.
-# This is mainly used for saying which services do NOT provide net.
-#rc_net_tap0_provide="!net"
-
-# This is the subsystem type.
-# It is used to match against keywords set by the keyword call in the
-# depend function of service scripts.
-#
-# It should be set to the value representing the environment this file is
-# PRESENTLY in, not the virtualization the environment is capable of.
-# If it is commented out, automatic detection will be used.
-#
-# The list below shows all possible settings as well as the host
-# operating systems where they can be used and autodetected.
-#
-# ""               - nothing special
-# "docker"         - Docker container manager (Linux)
-# "jail"           - Jail (DragonflyBSD or FreeBSD)
-# "lxc"            - Linux Containers
-# "openvz"         - Linux OpenVZ
-# "prefix"         - Prefix
-# "rkt"            - CoreOS container management system (Linux)
-# "subhurd"        - Hurd subhurds (to be checked)
-# "systemd-nspawn" - Container created by systemd-nspawn (Linux)
-# "uml"            - Usermode Linux
-# "vserver"        - Linux vserver
-# "xen0"           - Xen0 Domain (Linux and NetBSD)
-# "xenU"           - XenU Domain (Linux and NetBSD)
-#rc_sys=""
-
-# if  you use openrc-init, which is currently only available on Linux,
-# this is the default runlevel to activate after "sysinit" and "boot"
-# when booting.
-#rc_default_runlevel="default"
-
-# on Linux and Hurd, this is the number of ttys allocated for logins
-# It is used in the consolefont, keymaps, numlock and termencoding
-# service scripts.
-rc_tty_number=12
-
-##############################################################################
-# LINUX CGROUPS RESOURCE MANAGEMENT
-
-# If you have cgroups turned on in your kernel, this switch controls
-# whether or not a group for each controller is mounted under
-# /sys/fs/cgroup.
-# None of the other options in this section work if this is set to "NO".
-#rc_controller_cgroups="YES"
-
-# The following settings allow you to set up values for the cgroup
-# controllers for your services.
-# They can be set in this file;, however, if you do this, the settings
-# will apply to all of your services.
-# If you want different settings for each service, place the settings in
-# /etc/conf.d/foo for service foo.
-# The format is to specify the names of the settings followed by their
-# values. Each variable can hold multiple settings.
-# For example, you would use this to set the cpu.shares setting in the
-# cpu controller to 512 for your service.
-# rc_cgroup_cpu="
-# cpu.shares 512
-# "
-#
-#For more information about the adjustments that can be made with
-#cgroups, see Documentation/cgroups/* in the linux kernel source tree.
-
-# Set the blkio controller settings for this service.
-#rc_cgroup_blkio=""
-
-# Set the cpu controller settings for this service.
-#rc_cgroup_cpu=""
-
-# Add this service to the cpuacct controller (any value means yes).
-#rc_cgroup_cpuacct=""
-
-# Set the cpuset controller settings for this service.
-#rc_cgroup_cpuset=""
-
-# Set the devices controller settings for this service.
-#rc_cgroup_devices=""
-
-# Set the hugetlb controller settings for this service.
-#rc_cgroup_hugetlb=""
-
-# Set the memory controller settings for this service.
-#rc_cgroup_memory=""
-
-# Set the net_cls controller settings for this service.
-#rc_cgroup_net_cls=""
-
-# Set the net_prio controller settings for this service.
-#rc_cgroup_net_prio=""
-
-# Set the pids controller settings for this service.
-#rc_cgroup_pids=""
-
-# Set this to YES if you want all of the processes in a service's cgroup
-# killed when the service is stopped or restarted.
-# This should not be set globally because it kills all of the service's
-# child processes, and most of the time this is undesirable. Please set
-# it in /etc/conf.d/<service>.
-# To perform this cleanup manually for a stopped service, you can
-# execute cgroup_cleanup with /etc/init.d/<service> cgroup_cleanup or
-# rc-service <service> cgroup_cleanup.
-# rc_cgroup_cleanup="NO"

etc/rc.conf.Linux

@@ -0,0 +1,8 @@
+
+##############################################################################
+# LINUX SPECIFIC OPTIONS
+
+# This is the number of tty's used in most of the rc-scripts (like
+# consolefont, numlock, etc ...)
+rc_tty_number=12
+

etc/rc.conf.in

@@ -0,0 +1,94 @@
+# Global OpenRC configuration settings
+
+# Set to "YES" if you want the rc system to try and start services
+# in parallel for a slight speed improvement. When running in parallel we
+# prefix the service output with it's name as the output will get
+# jumbled up.
+# WARNING: whilst we have improved parallel, it can still potentially lock
+# the boot process. Don't file bugs about this unless you can supply
+# patches that fix it without breaking other things!
+rc_parallel="NO"
+
+# Set rc_interactive to "YES" and you'll be able to press the I key during
+# boot so you can choose to start specific services. Set to "NO" to disable
+# this feature.
+rc_interactive="YES"
+
+# Do we allow any started service in the runlevel to satisfy the depedency
+# or do we want all of them regardless of state? For example, if net.eth0
+# and net.eth1 are in the default runlevel then with rc_depend_strict="NO"
+# both will be started, but services that depend on 'net' will work if either
+# one comes up. With rc_depend_strict="YES" we would require them both to
+# come up.
+rc_depend_strict="YES"
+
+# rc_hotplug is a list of services that we allow to be hotplugged.
+# By default we do not allow hotplugging.
+# A hotplugged service is one started by a dynamic dev manager when a matching
+# hardware device is found.
+# This service is intrinsically included in the boot runlevel.
+# To disable services, prefix with a !
+# Example - rc_hotplug="net.wlan !net.*"
+# This allows net.wlan and any service not matching net.* to be plugged.
+# Example - rc_hotplug="*"
+# This allows all services to be hotplugged
+#rc_hotplug="*"
+
+# rc_logger launches a logging daemon to log the entire rc process to
+# /var/log/rc.log
+# NOTE: Linux systems require the devfs service to be started before
+# logging can take place and as such cannot log the sysinit runlevel.
+rc_logger="NO"
+
+# By default we filter the environment for our running scripts. To allow other
+# variables through, add them here. Use a * to allow all variables through.
+# rc_env_allow="VAR1 VAR2"
+
+# By default we assume that all daemons will start correctly.
+# However, some do not - a classic example is that they fork and return 0 AND
+# then child barfs on a configuration error. Or the daemon has a bug and the
+# child crashes. You can set the number of milliseconds start-stop-daemon
+# waits to check that the daemon is still running after starting here.
+# The default is 0 - no checking.
+# rc_start_wait=100
+
+##############################################################################
+# MISC CONFIGURATION VARIABLES
+# There variables are shared between many init scripts
+
+# Set unicode to YES to turn on unicode support for keyboards and screens.
+unicode="NO"
+
+# Network fstypes. Below is the default.
+net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
+
+##############################################################################
+# SERVICE CONFIGURATION VARIABLES
+# These variables are documented here, but should be configured in
+# /etc/conf.d/foo for service foo and NOT enabled here unless you
+# really want them to work on a global basis.
+
+# Some daemons are started and stopped via start-stop-daemon.
+# We can set some things on a per service basis, like the nicelevel.
+#export SSD_NICELEVEL="-19"
+
+# Pass ulimit parameters 
+#rc_ulimit="-u 30"
+
+# It's possible to define extra dependencies for services like so
+#rc_config="/etc/foo"
+#rc_need="openvpn"
+#rc_use="net.eth0"
+#rc_after="clock"
+#rc_before="local"
+#rc_provide="!net"
+
+# You can also enable the above commands here for each service. Below is an
+# example for service foo.
+#rc_foo_config="/etc/foo"
+#rc_foo_need="openvpn"
+#rc_foo_after="clock"
+
+# You can also remove dependencies.
+# This is mainly used for saying which servies do NOT provide net.
+#rc_net_tap0_provide="!net"

etc/rc.devd

@@ -1,18 +1,10 @@
 #!/bin/sh
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-#    except according to the terms contained in the LICENSE file.
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 # Inform RC that we are in the background and hotplugged
-IN_BACKGROUND=yes
-IN_HOTPLUG=yes
-export IN_BACKGROUND IN_HOTPLUG
+export IN_BACKGROUND=yes
+export IN_HOTPLUG=yes
 
 getmedia() {
 	ifconfig "$1" | while read line; do

etc/rc.in

@@ -1,25 +1,18 @@
 #!@SHELL@
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-#    except according to the terms contained in the LICENSE file.
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)
-[ -z "$TERM" -o "$TERM" = "dumb" ] && TERM="@TERM@" && export TERM
+[ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@"
 
-# Handle interrupts
+# Handle interrupts 
 trap : SIGINT
 trap "echo 'Boot interrupted'; exit 1" SIGQUIT
 
-/sbin/openrc sysinit || exit 1
-/sbin/openrc boot || exit 1
-/sbin/openrc default
+/sbin/rc sysinit || exit 1
+/sbin/rc boot || exit 1
+/sbin/rc default
 
 # We don't actually care if rc default worked or not, we should exit 0
 # to allow logins

etc/rc.shutdown.in

@@ -1,24 +1,17 @@
 #!@SHELL@
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-#    except according to the terms contained in the LICENSE file.
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
-# Handle interrupts
+# Handle interrupts 
 trap : SIGINT SIGQUIT
 
 # Try and use stuff in /lib over anywhere else so we can shutdown
 # local mounts correctly.
-LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LD_LIBRARY_PATH}" ; export LD_LIBRARY_PATH
+export LD_LIBRARY_PATH="/lib${LD_LIBRARY_PATH:+:}${LDLIBRARY_PATH}"
 
 # If $TERM is not set then assume default of @TERM@
 # This gives us a nice colour boot :)
-[ -z "$TERM" -o "$TERM" = "dumb" ] && TERM="@TERM@" && export TERM
+[ -z "$TERM" -o "$TERM" = "dumb" ] && export TERM="@TERM@"
 
 action=${1:-shutdown}
-exec /sbin/openrc "${action}"
+exec /sbin/rc "${action}"

guide.md

@@ -1,269 +0,0 @@
-# Purpose and description
-
-OpenRC is an init system for Unixoid operating systems. It takes care of 
-startup and shutdown of the whole system, including services.
-
-It evolved out of the Gentoo "Baselayout" package which was a custom pure-shell 
-startup solution. (This was both hard to maintain and debug, and not very 
-performant)
-
-Most of the core parts are written in C99 for performance and flexibility 
-reasons, while everything else is posix sh.
-The License is 2-clause BSD
-
-Current size is about 10k LoC C, and about 4k LoC shell.
-
-OpenRC is known to work on Linux, many BSDs (FreeBSD, OpenBSD, DragonFlyBSD at 
-least) and HURD.
-
-Services are stateful (i.e. `start`; `start` will lead to "it's already started")
-
-# Startup
-
-Usually PID1 (aka. `init`) calls the OpenRC binary (`/sbin/openrc` by default).
-(The default setup assumes sysvinit for this)
-
-openrc scans the runlevels (default: `/etc/runlevels`) and builds a dependency
-graph, then starts the needed service scripts, either serialized (default) or in 
-parallel.
-
-When all the init scripts are started openrc terminates. There is no persistent 
-daemon. (Integration with tools like monit, runit or s6 can be done)
-
-# Shutdown
-
-On change to runlevel 0/6 or running `reboot`, `halt` etc., openrc stops all
-services that are started and runs the services in the `shutdown` runlevel.
-
-# Modifying Service Scripts
-
-Any service can, at any time, be started/stopped/restarted by executing 
-`rc-service someservice start`, `rc-service someservice stop`, etc.
-Another, less preferred method, is to run the service script directly,
-e.g. `/etc/init.d/service start`, `/etc/init.d/service stop`, etc.
-
-OpenRC will take care of dependencies, e.g starting apache will start network 
-first, and stopping network will stop apache first.
-
-There is a special command `zap` that makes OpenRC 'forget' that a service is
-started; this is mostly useful to reset a crashed service to stopped state 
-without invoking the (possibly broken) stop function of the service script.
-
-Calling `openrc` without any arguments will try to reset all services so
-that the current runlevel is satisfied; if you manually started apache it will be 
-stopped, and if squid died but is in the current runlevel it'll be restarted.
-
-There is a `service` helper that emulates the syntax seen on e.g. older Redhat
-and Ubuntu (`service nginx start` etc.)
-
-# Runlevels
-
-OpenRC has a concept of runlevels, similar to what sysvinit historically 
-offered. A runlevel is basically a collection of services that needs to be 
-started. Instead of random numbers they are named, and users can create their 
-own if needed. This allows, for example, to have a default runlevel with 
-"everything" enabled, and a "powersaving" runlevel where some services are 
-disabled.
-
-The `rc-status` helper will print all currently active runlevels and the state
-of init scripts in them:
-
-```
-# rc-status
- * Caching service dependencies ... [ ok ]
-Runlevel: default
- modules                     [  started  ]
- lvm                         [  started  ]
-```
-
-All runlevels are represented as folders in `/etc/runlevels/` with symlinks to 
-the actual init scripts.
-
-Calling openrc with an argument (`openrc default`) will switch to that
-runlevel; this will start and stop services as needed.
-
-Managing runlevels is usually done through the `rc-update` helper, but could of 
-course be done by hand if desired.
-e.g. `rc-update add nginx default` - add nginx to the default runlevel
-Note: This will not auto-start nginx! You'd still have to trigger `rc` or run 
-the initscript by hand.
-
-FIXME: Document stacked runlevels
-
-The default startup uses the runlevels `boot`, `sysinit` and `default`, in that 
-order. Shutdown uses the `shutdown` runlevel.
-
-
-# Syntax of Service Scripts
-
-Service scripts are shell scripts. OpenRC aims at using only the standardized 
-POSIX sh subset for portability reasons. The default interpreter (build-time 
-toggle) is `/bin/sh`, so using for example mksh is not a problem.
-
-OpenRC has been tested with busybox sh, ash, dash, bash, mksh, zsh and possibly 
-others. Using busybox sh has been difficult as it replaces commands with 
-builtins that don't offer the expected features.
-
-The interpreter for initscripts is `#!/sbin/openrc-run`.
-Not using this interpreter will break the use of dependencies and is not 
-supported. (iow: if you insist on using `#!/bin/sh` you're on your own)
-
-A `depend` function declares the dependencies of this service script.
-All scripts must have start/stop/status functions, but defaults are provided.
-Extra functions can be added easily:
-
-```
-extra_commands="checkconfig"
-checkconfig() {
-	doSomething
-}
-```
-
-This exports the checkconfig function so that `/etc/init.d/someservice 
-checkconfig` will be available, and it "just" runs this function.
-
-While commands defined in `extra_commands` are always available, commands
-defined in `extra_started_commands` will only work when the service is started
-and those defined in `extra_stopped_commands` will only work when the service is
-stopped. This can be used for implementing graceful reload and similar
-behaviour.
-
-Adding a restart function will not work, this is a design decision within 
-OpenRC. Since there may be dependencies involved (e.g. network -> apache) a 
-restart function is in general not going to work. 
-restart is internally mapped to `stop()` + `start()` (plus handling dependencies).
-If a service needs to behave differently when it is being restarted vs
-started or stopped, it should test the `$RC_CMD` variable, for example:
-
-```
-[ "$RC_CMD" = restart ] && do_something
-```
-
-# The Depend Function
-
-This function declares the dependencies for a service script. This
-determines the order the service scripts start.
-
-```
-depend() {
-	need net
-	use dns logger netmount
-	want coolservice
-}
-```
-
-`need` declares a hard dependency - net always needs to be started before this 
-	service does
-
-`use` is a soft dependency - if dns, logger or netmount is in this runlevel 
-	start it before, but we don't care if it's not in this runlevel.
-	`want` is between need and use - try to start coolservice if it is
-	installed on the system, regardless of whether it is in the
-	runlevel, but we don't care if it starts.
-
-`before` declares that we need to be started before another service
-
-`after` declares that we need to be started after another service, without 
-	creating a dependency (so on calling stop the two are independent)
-
-`provide` allows multiple implementations to provide one service type, e.g.:
-	`provide cron` is set in all cron-daemons, so any one of them started 
-	satisfies a cron dependency
-
-`keyword` allows platform-specific overrides, e.g. `keyword -lxc` makes this 
-	service script a noop in lxc containers. Useful for things like keymaps, 
-	module loading etc. that are either platform-specific or not available 
-	in containers/virtualization/...
-
-FIXME: Anything missing in this list?
-
-# The Default Functions
-
-All service scripts are assumed to have the following functions:
-
-```
-start()
-stop()
-status()
-```
-
-There are default implementations in `lib/rc/sh/openrc-run.sh` - this allows very 
-compact service scripts. These functions can be overridden per service script as 
-needed.
-
-The default functions assume the following variables to be set in the service 
-script:
-
-```
-command=
-command_args=
-pidfile=
-```
-
-Thus the 'smallest' service scripts can be half a dozen lines long
-
-# The Magic of `conf.d`
-
-Most service scripts need default values. It would be fragile to
-explicitly source some arbitrary files. By convention `openrc-run` will source
-the matching file in `/etc/conf.d/` for any script in `/etc/init.d/`
-
-This allows you to set random startup-related things easily. Example:
-
-```
-conf.d/foo:
-START_OPTS="--extraparameter sausage"
-
-init.d/foo:
-start() {
-	/usr/sbin/foo-daemon ${STARTOPTS}
-}
-```
-
-The big advantage of this split is that most of the time editing of the init 
-script can be avoided.
-
-# Start-Stop-Daemon
-
-OpenRC has its own modified version of s-s-d, which is historically related and 
-mostly syntax-compatible to Debian's s-s-d, but has been rewritten from scratch.
-
-It helps with starting daemons, backgrounding, creating PID files and many 
-other convenience functions related to managing daemons.
-
-# `/etc/rc.conf`
-
-This file manages the default configuration for OpenRC, and it has examples of 
-per-service-script variables.
-
-Among these are `rc_parallel` (for parallelized startup), `rc_log` (logs all boot 
-messages to a file), and a few others.
-
-# ulimit and CGroups
-
-Setting `ulimit` and `nice` values per service can be done through the `rc_ulimit`
-variable.
-
-Under Linux, OpenRC can optionally use CGroups for process management.
-By default each service script's processes are migrated to their own CGroup.
-
-By changing certain values in the `conf.d` file limits can be enforced per 
-service. It is easy to find orphan processes of a service that persist after 
-`stop()`, but by default these will NOT be terminated.
-To change this add `rc_cgroup_cleanup="yes"` in the `conf.d` files for services 
-where you desire this functionality.
-
-# Caching
-
-For performance reasons OpenRC keeps a cache of pre-parsed initscript metadata
-(e.g. `depend`). The default location for this is `/${RC_SVCDIR}/cache`.
-
-The cache uses `mtime` to check for file staleness. Should any service script
-change it'll re-source the relevant files and update the cache
-
-# Convenience functions
-
-OpenRC has wrappers for many common output tasks in libeinfo.
-This allows to print colour-coded status notices and other things.
-To make the output consistent the bundled initscripts all use ebegin/eend to 
-print nice messages.

init.d.misc/Makefile

@@ -0,0 +1,10 @@
+DIR=	${INITDIR}
+SRCS=	avahi-dnsconfd.in avahid.in dbus.in hald.in named.in ntpd.in \
+	openvpn.in polkitd.in sshd.in
+
+MK=	../mk
+
+SED_EXTRA+= -e 's:@VARBASE@:/var:g'
+
+include ${MK}/scripts.mk
+include Makefile.${OS}

init.d.misc/Makefile.FreeBSD

@@ -0,0 +1 @@
+PREFIX?=	/usr/local

init.d.misc/Makefile.Linux

@@ -0,0 +1 @@
+PREFIX=/usr

init.d.misc/Makefile.NetBSD

@@ -0,0 +1 @@
+PREFIX?=	/usr/pkg

init.d.misc/avahi-dnsconfd.in

@@ -0,0 +1,15 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+command=@PKG_PREFIX@/sbin/avahi-dnsconfd
+command_args="${avahi_dnsconfd_args} -D"
+pidfile=@VARBASE@/run/avahi-dnsconfd.pid
+name="Avahi DNS Configuration Daemon"
+
+depend()
+{
+	use dns
+	need localmount dbus
+	after bootmisc
+}

init.d.misc/avahid.in

@@ -0,0 +1,15 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+command=@PKG_PREFIX@/sbin/avahi-daemon
+command_args="${avahid_args} -D"
+pidfile=@VARBASE@/run/avahi-daemon/pid
+name="Avahi Service Advertisement Daemon"
+
+depend()
+{
+	use dns
+	need localmount dbus
+	after bootmisc
+}

init.d.misc/dbus.in

@@ -0,0 +1,19 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+command=@PKG_PREFIX@/bin/dbus-daemon
+pidfile=@VARBASE@/run/dbus/pid
+command_args="${dbusd_args---system}"
+name="Message Bus Daemon"
+
+depend()
+{
+	need localmount net
+	after bootmisc
+}
+
+start_pre()
+{
+	mkdir -p $(dirname $pidfile)
+}

init.d.misc/dnsmasq.in

@@ -0,0 +1,24 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+command=@PKG_PREFIX@/sbin/dnsmasq
+command_args=${dnsmasq_args}
+pidfile=@VARBASE@/run/dnsmasq.pid
+required_files=/etc/dnsmasq.conf
+
+extra_started_commands="reload"
+
+depend()
+{	
+	provide dns
+	need localmount net
+	after bootmisc
+}
+
+reload()
+{
+	ebegin "Reloading ${RC_SVCNAME}"
+	start-stop-daemon --signal SIGHUP --pidfile "${pidfile}"
+	eend $?
+}

init.d.misc/hald.in

@@ -0,0 +1,13 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+command=@PKG_PREFIX@/sbin/hald
+pidfile=@VARBASE@/run/hald/hald.pid
+command_args="${hald_args}"
+name="Hardware Abstraction Layer Daemon"
+
+depend()
+{
+	need dbus
+}

init.d.misc/named.in

@@ -0,0 +1,109 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+command=/usr/sbin/named
+command_args=${named_args}
+pidfile=@VARBASE@/run/named.pid
+name="Domain Name server"
+extra_started_commands="reload"
+
+namedb=/etc/namedb
+uid=named
+case "${RC_UNAME}" in
+	FreeBSD)
+		uid=bind
+		pidfile=@VARBASE@/run/named/pid
+		;;
+	Linux)
+		uid=bind
+		;;
+esac
+named_uid=${named_uid:-${uid}}
+
+depend()
+{
+	provide dns
+	need localmount
+	after bootmisc
+}
+
+start_pre()
+{
+	if [ -n "${named_chroot}" ]; then
+		# Create (or update) the chroot directory structure
+		if [ -r /etc/mtree/BIND.chroot.dist ]; then
+			mtree -deU -f /etc/mtree/BIND.chroot.dist -p "${named_chroot}"
+		else
+			ewarn "/etc/mtree/BIND.chroot.dist missing,"
+			ewarn "chroot directory structure not updated"
+		fi
+
+		if [ ! -d "${named_chroot}"/. ]; then
+			eerror "chroot directory ${named_chroot} missing"
+			exit 1
+		fi
+
+		# Create /etc/namedb symlink
+		if [ ! -L "${namedb}" ]; then
+			if [ -d "${namedb}" ]; then
+				ewarn "named chroot: ${namedb} is a directory!"
+			elif [ -e "${namedb}" ]; then
+				ewarn "named chroot: ${namedb} exists!"
+			else
+				ln -s "${named_chroot}${namedb}" "${namedb}"
+			fi
+		else
+			# Make sure it points to the right place.
+			ln -shf "${named_chroot}${namedb}" "${namedb}"
+		fi
+
+		case "${RC_UNAME}" in
+			*BSD|DragonFly)
+				# Mount a devfs in the chroot directory if needed
+				umount "${named_chroot}"/dev 2>/dev/null
+				mount -t devfs dev "${named_chroot}"/dev
+				devfs -m "${named_chroot}"/dev ruleset devfsrules_hide_all
+				devfs -m "${named_chroot}"/dev rule apply path null unhide
+				devfs -m "${named_chroot}"/dev rule apply path random unhide
+				;;
+		esac
+
+		# Copy local timezone information if it is not up to date.
+		if [ -r /etc/localtime ]; then
+			cmp -s /etc/localtime "${named_chroot}/etc/localtime" ||
+			cp -p /etc/localtime "${named_chroot}/etc/localtime"
+		fi
+
+		command_args="${command_args} -t ${named_chroot}"
+
+		ln -fs "${named_chroot}${pidfile}" "${pidfile}"
+	fi
+
+	if [ ! -s "${named_chroot}${namedb}/rndc.conf" ]; then
+		local confgen="${command%/named}/rndc-confgen -a -b256 -u ${named_uid} \
+			-c ${named_chrootdir}/etc/namedb/rndc.key"
+		if [ -s "${named_chroot}${namedb}/rndc.key" ]; then
+			local getuser="stat -f%Su"
+			[ "${RC_UNAME}" = "Linux" ] && getuser="stat -c%U"
+			case $(${getuser} "${named_chroot}${namedb}"/rndc.key) in
+				root|"${named_uid}");;
+				*) ${confgen};;
+			esac
+		else
+			${confgen}
+		fi
+	fi
+}
+
+reload()
+{
+	rndc reload
+}
+
+stop_post()
+{
+	if [ -n "${named_chroot}" -a -c "${named_chroot}"/dev/null ]; then
+		umount "${named_chroot}"/dev 2>/dev/null || true
+	fi
+}

init.d.misc/ntpd.in

@@ -0,0 +1,40 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+ntpd_config=${ntpd_config:-/etc/ntp.conf}
+ntpd_drift=${ntpd_drift:-/var/db/ntpd.drift}
+
+command=/usr/sbin/ntpd
+pidfile=/var/run/ntpd.pid
+command_args="${ntpd_args} -c ${ntpd_config} -f ${ntpd_drift} -p ${pidfile}"
+name="Network Time Protocol Daemon"
+
+depend()
+{
+	use dns
+	need localmount
+	after bootmisc ntp-client
+}
+
+start_pre()
+{
+	if [ ! -r "${ntpd_config}" ]; then
+		eerror "${ntpd_config} is not readable"
+		return 1
+	fi
+
+	if [ -n "${ntpd_chroot}" ]; then
+		case "${RC_UNAME}" in
+			*BSD|DragonFly)
+				if [ ! -c "${ntpd_chroot}/dev/clockctl" ]; then
+					rm -f "${ntpd_chroot}/dev/clockctl"
+					(cd /dev; /bin/pax -rw -pe clockctl "${ntpd_chroot}/dev")
+				fi
+				;;
+		esac
+		ln -fs "${ntpd_chroot}${ntpd_drift}" "${ntpd_drift}"
+
+		command_args="${command_args} -u ntpd:ntpd -i ${ntpd_chroot}"
+	fi
+}

init.d.misc/openvpn.in

@@ -0,0 +1,67 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+vpn=${RC_SVCNAME#*.}
+name="OpenVPN"
+[ "${vpn}" != "openvpn" ] && name="${name} (${vpn})"
+command=@PKG_PREFIX@/sbin/openvpn
+
+pidfile=@VARBASE@/run/"${RC_SVCNAME}".pid
+openvpn_dir=${openvpn_dir:-@PKG_PREFIX@/etc/openvpn}
+openvpn_config=${openvpn_config:-${openvpn_dir}/${vpn}.conf}
+command_args="${openvpn_args} --daemon --config ${openvpn_config} --writepid ${pidfile}"
+required_dirs="${openvpn_dir}"
+required_files="${openvpn_config}"
+
+# If we're an openvpn client, then supply a nice default config
+# You can find sample up/down scripts in the OpenRC support/openvpn dir
+if yesno "${openvpn_client}"; then
+	openvpn_up=${openvpn_up:-${openvpn_dir}/up.sh}
+	openvpn_down=${openvpn_down:-${openvpn_dir}/down.sh}
+	command_args="${command_args} --nobind --up-delay --up-restart --down-pre"
+	command_args="${command_args} --up ${openvpn_up}"
+	command_args="${command_args} --down ${openvpn_down}"
+	required_files="${required_files} ${openvpn_up} ${openvpn_down}"
+	
+	in_background_fake="start stop"
+	start_inactive="YES"
+fi
+
+depend()
+{
+	need localmount net
+	use dns
+	after bootmisc
+}
+
+start_pre()
+{
+	# Linux has good dynamic tun/tap creation
+	if [ "${RC_UNAME}" = "Linux" ]; then
+		if [ ! -e /dev/net/tun ]; then
+			if ! modprobe tun; then
+				eerror "TUN/TAP support is not available in this kernel"
+				return 1
+			fi
+		fi
+		if [ -h /dev/net/tun -a -c /dev/misc/net/tun ]; then
+			ebegin "Detected broken /dev/net/tun symlink, fixing..."
+			rm -f /dev/net/tun
+			ln -s /dev/misc/net/tun /dev/net/tun
+			eend $?
+		fi
+	else
+		if type kldload >/dev/null 2>&1; then
+			# Hammer the modules home by default
+			sysctl -a | grep -q '\.tun\.' || kldload if_tun
+			sysctl -a | grep -q '\.tap\.' || kldload if_tap
+		fi
+	fi
+	
+	# If the config file does not specify the cd option, we do
+	# But if we specify it, we override the config option which we do not want
+	if ! grep -q "^[ \t]*cd[ \t].*" "${openvpn_config}"; then
+		command_args="${command_args} --cd ${openvpn_dir}"
+	fi
+}

init.d.misc/polkitd.in

@@ -0,0 +1,13 @@
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
+
+command=@PKG_PREFIX@/sbin/polkitd
+pidfile=@VARBASE@/run/polkitd/polkitd.pid
+command_args="${polkitd_args}"
+name="PolicyKit Daemon"
+
+depend()
+{
+	need dbus
+}

init.d.misc/sshd.in

@@ -1,16 +1,9 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/sshd
-command_args=$sshd_args
+command_args=${sshd_args}
 pidfile=@VARBASE@/run/sshd.pid
 required_files=/etc/ssh/sshd_config
 
@@ -38,5 +31,5 @@ start_pre()
 		eend $? || return 1
 	fi
 
-	$command -t
+	${command} -t	
 }

init.d/.gitignore

@@ -1,48 +0,0 @@
-agetty
-binfmt
-modules-load
-bootmisc
-fsck
-hostname
-local
-localmount
-loopback
-moused
-netmount
-network
-root
-savecache
-swap
-sysctl
-urandom
-devfs
-dmesg
-hwclock
-consolefont
-keymaps
-killprocs
-modules
-mount-ro
-mtab
-net-online
-numlock
-osclock
-procfs
-s6-svscan
-staticroute
-sysfs
-devdb
-hostid
-newsyslog
-pf
-rarpd
-rc-enabled
-rpcbind
-runsvdir
-savecore
-swap-blk
-swclock
-syslogd
-termencoding
-ttys
-wscons

init.d/Makefile

@@ -1,36 +1,16 @@
-include ../mk/net.mk
-
 DIR=	${INITDIR}
-SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in loopback.in \
-	netmount.in osclock.in root.in savecache.in swap.in swclock.in \
-	sysctl.in runsvdir.in urandom.in s6-svscan.in ${SRCS-${OS}}
+SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in \
+	netmount.in root.in savecache.in swap.in sysctl.in urandom.in
 BIN=	${OBJS}
 
-# Are we installing our network scripts?
-ifeq (${MKNET},yes)
-SRCS+= network.in staticroute.in
-endif
+INSTALLAFTER=	_installafter
+CLEANFILES+=	net.lo
+TARGETS+=	net.lo
 
 MK=	../mk
 include ${MK}/os.mk
-
-# Generic BSD scripts
-SRCS-FreeBSD=	hostid.in modules.in moused.in newsyslog.in pf.in rarpd.in \
-		rc-enabled.in rpcbind.in savecore.in syslogd.in
-# These are FreeBSD specific
-SRCS-FreeBSD+=	adjkerntz.in devd.in dumpon.in encswap.in ipfw.in \
-		modules-load.in mixer.in nscd.in powerd.in syscons.in
-
-SRCS-Linux=	agetty.in binfmt.in devfs.in dmesg.in hwclock.in consolefont.in \
-	keymaps.in killprocs.in modules.in modules-load.in mount-ro.in mtab.in \
-	numlock.in procfs.in net-online.in sysfs.in termencoding.in
-
-# Generic BSD scripts
-SRCS-NetBSD=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
-		rpcbind.in savecore.in syslogd.in
-# These are NetBSD specific
-SRCS-NetBSD+=	devdb.in swap-blk.in ttys.in wscons.in
-
+include Makefile.${OS}
 include ${MK}/scripts.mk
 
-_installafter_: realinstall
+_installafter: realinstall
+	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO}

init.d/Makefile.FreeBSD

@@ -0,0 +1,13 @@
+NET_LO=	net.lo0
+
+# Generic BSD scripts
+SRCS+=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
+	rpcbind.in savecore.in syslogd.in
+
+# These are FreeBSD specific
+SRCS+=	adjkerntz.in devd.in dumpon.in ipfw.in mixer.in nscd.in \
+	powerd.in syscons.in
+
+.SUFFIXES:	.BSD.in
+.BSD.in:
+	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/Makefile.Linux

@@ -0,0 +1,9 @@
+NET_LO=	net.lo
+
+SRCS+=	devfs.in dmesg.in hwclock.in consolefont.in keymaps.in killprocs.in \
+	modules.in mount-ro.in mtab.in numlock.in procfs.in sysfs.in \
+	termencoding.in
+
+.SUFFIXES:	.Linux.in
+.Linux.in:
+	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/Makefile.NetBSD

@@ -0,0 +1,12 @@
+NET_LO=	net.lo0
+
+# Generic BSD scripts
+SRCS+=	hostid.in moused.in newsyslog.in pf.in rarpd.in rc-enabled.in \
+	rpcbind.in savecore.in syslogd.in
+
+# These are NetBSD specific
+SRCS+=	devdb.in swap-blk.in ttys.in wscons.in
+
+.SUFFIXES:	.BSD.in
+.BSD.in:
+	sed ${SED_REPLACE} ${SED_EXTRA} $< > $@

init.d/adjkerntz.in

@@ -1,21 +1,14 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 extra_commands="save"
 
-description="Sets the local clock to UTC or Local Time."
+description="Sets the local clock to UTC or Local Time." 
 description_save="Saves the current time in the BIOS."
 
-: ${clock:=${CLOCK:-UTC}}
-if [ "$clock" = "UTC" ]; then
+clock=${clock:-${CLOCK:-UTC}}
+if [ "${clock}" = "UTC" ]; then
 	utc="UTC"
 else
 	utc="Local Time"
@@ -23,20 +16,19 @@ fi
 
 depend()
 {
-	after swclock
 	provide clock
 	# BSD adjkerntz needs to be able to write to /etc
-	if [ "$clock" = "UTC" -a -e /etc/wall_cmos_clock ] ||
-	   [ "$clock" != "UTC" -a ! -e /etc/wall_cmos_clock ]; then
+	if [ "${clock}" = "UTC" -a -e /etc/wall_cmos_clock ] ||
+	   [ "${clock}" != "UTC" -a ! -e /etc/wall_cmos_clock ]; then
 		need root
 	fi
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start()
-{
+{	
 	ebegin "Starting the System Clock Adjuster [${utc}]"
-	if [ "$clock" != "UTC" ]; then
+	if [ "${clock}" != "UTC" ]; then
 		echo >/etc/wall_cmos_clock
 		start-stop-daemon --start --exec /sbin/adjkerntz -- -i
 	else
@@ -56,8 +48,8 @@ save()
 stop()
 {
 	# Don't tweak the hardware clock on LiveCD halt.
-	if yesno "${clock_systohc:-$CLOCK_SYSTOHC}"; then
-	   [ -z "$CDBOOT" ] && save
+	if yesno "${clock_systohc:-${CLOCK_SYSTOHC}}"; then
+	   [ -z "${CDBOOT}" ] && save
 	fi
 
 	ebegin "Stopping the System Clock Adjuster"

init.d/agetty.in

@@ -1,32 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2017 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="start agetty on a terminal line"
-supervisor=supervise-daemon
-port="${RC_SVCNAME#*.}"
-term_type="${term_type:-linux}"
-command=/sbin/agetty
-command_args_foreground="${agetty_options} ${port} ${baud} ${term_type}"
-pidfile="/run/${RC_SVCNAME}.pid"
-
-depend() {
-	after local
-	keyword -prefix
-}
-
-start_pre() {
-	if [ -z "$port" ]; then
-		eerror "${RC_SVCNAME} cannot be started directly. You must create"
-		eerror "symbolic links to it for the ports you want to start"
-		eerror "agetty on and add those to the appropriate runlevels."
-		return 1
-	fi
-}

init.d/binfmt.in

@@ -1,27 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Register misc binary format handlers"
-
-depend()
-{
-	after clock procfs
-	use modules devfs
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -vserver
-}
-
-start()
-{
-	ebegin "Loading custom binary format handlers"
-	"$RC_LIBEXECDIR"/sh/binfmt.sh
-	eend $?
-	return 0
-}

init.d/bootmisc.in

@@ -1,253 +1,152 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {
+	use hostname
 	need localmount
 	before logger
-	after clock root sysctl
-	keyword -prefix -timeout
+	after clock sysctl
+	keyword noprefix
 }
 
-: ${wipe_tmp:=${WIPE_TMP:-yes}}
-: ${log_dmesg:=${LOG_DMESG:-yes}}
+dir_writeable()
+{
+	mkdir "$1"/.test.$$ 2>/dev/null && rmdir "$1"/.test.$$
+}
 
 cleanup_tmp_dir()
 {
 	local dir="$1"
 
-	if ! [ -d "$dir" ]; then
-		mkdir -p "$dir" || return $?
+	if ! [ -d "${dir}" ]; then
+		mkdir -p "${dir}" || return $?
 	fi
-	checkpath -W "$dir" || return 1
-	chmod a+rwt "$dir" 2> /dev/null
-	cd "$dir" || return 1
-	if yesno $wipe_tmp; then
-		ebegin "Wiping $dir directory"
+	dir_writeable "${dir}" || return 1
+	chmod +t "${dir}"
+	cd "${dir}"
+	if yesno ${wipe_tmp:-${WIPE_TMP:-yes}}; then
+		ebegin "Wiping ${dir} directory"
+		local startopts="-x . -depth"
+		[ "${RC_UNAME}" = "Linux" ] && startopts=". -xdev -depth"
 
-		# Faster than raw find
-		if ! rm -rf -- [!ajlq\.]* 2>/dev/null ; then
-			# Blah, too many files
-			find . -maxdepth 1 -name '[!ajlq\.]*' -exec rm -rf -- {} +
-		fi
+		# Faster than find
+		rm -rf -- [b-ikm-pr-zA-Z0-9\.]*
 
-		# pam_mktemp creates a .private directory within which
-		# each user gets a private directory with immutable
-		# bit set; remove the immutable bit before trying to
-		# remove it.
-		[ -d /tmp/.private ] && chattr -R -a /tmp/.private 2> /dev/null
-
-		# Prune the paths that are left
-		find . -maxdepth 1 \
-			! -name . \
-			! -name lost+found \
-			! -name quota.user \
-			! -name aquota.user \
-			! -name quota.group \
-			! -name aquota.group \
-			! -name journal \
-			-exec rm -rf -- {} +
+		find ${startopts} ! -name . \
+			! -path "./lost+found" \
+			! -path "./lost+found/*" \
+			! -path "./quota.user" \
+			! -path "./quota.user/*" \
+			! -path "./aquota.user" \
+			! -path "./aquota.user/*" \
+			! -path "./quota.group" \
+			! -path "./quota.group/*" \
+			! -path "./aquota.group" \
+			! -path "./aquota.group/*" \
+			! -path "./journal" \
+			! -path "./journal/*" \
+			! -path "./.private" \
+			! -path "./.private/*" \
+			-exec rm -rf {} \;
 		eend 0
 	else
-		ebegin "Cleaning $dir directory"
-		rm -rf -- .X*-lock esrv* kio* \
-			jpsock.* .fam* .esd* \
-			orbit-* ssh-* ksocket-* \
-			.*-unix
+		ebegin "Cleaning ${dir} directory"
+		rm -rf -- "${dir}"/.X*-lock "${dir}"/esrv* "${dir}"/kio* \
+			"${dir}"/jpsock.* "${dir}"/.fam* "${dir}"/.esd* \
+			"${dir}"/orbit-* "${dir}"/ssh-* "${dir}"/ksocket-* \
+			"${dir}"/.*-unix
 		eend 0
 	fi
 }
 
-cleanup_var_run_dir()
-{
-	ebegin "Cleaning /var/run"
-	for x in $(find /var/run ! -type d ! -name utmp \
-		! -name random-seed ! -name dev.db \
-		! -name ld-elf.so.hints ! -name ld-elf32.so.hints \
-		! -name ld.so.hints);
-	do
-		# Clean stale sockets
-		if [ -S "$x" ]; then
-			if command -v fuser >/dev/null 2>&1; then
-				fuser "$x" >/dev/null 2>&1 || rm -- "$x"
-			else
-				rm -- "$x"
-			fi
-		fi
-		[ ! -f "$x" ] && continue
-		# Do not remove pidfiles of already running daemons
-		case "$x" in
-			*.pid)
-				start-stop-daemon --test --quiet \
-				--stop --pidfile "$x" && continue
-			;;
-		esac
-		rm -f -- "$x"
-	done
-	eend 0
-}
-
-mkutmp()
-{
-	: >"$1"
-	# Not all systems have the utmp group
-	chgrp utmp "$1" 2>/dev/null
-	chmod 0664 "$1"
-}
-
-migrate_to_run()
-{
-	src="$1"
-	dst="$2"
- 	if [ -L $src -a "$(readlink -f $src)" != $dst ]; then
- 		ewarn "$src does not point to $dst."
- 		ewarn "Setting $src to point to $dst."
- 		rm $src
- 	elif [ ! -L $src -a -d $src ]; then
- 		ebegin "Migrating $src to $dst"
- 		cp -a $src/* $dst/
- 		rm -rf $src
- 		eend $?
- 	fi
- 	# If $src doesn't exist at all, just run this
- 	if [ ! -e $src ]; then
- 		ln -s $dst $src
- 	fi
-}
-
-clean_run()
-{
-	[ "$RC_SYS" = VSERVER -o "$RC_SYS" = LXC ] && return 0
-	local dir
-	# If / is still read-only due to a problem, this will fail!
-	if ! checkpath -W /; then
-		ewarn "/ is not writable; unable to clean up underlying /run"
-		return 1
-	fi
-	if ! checkpath -W /tmp; then
-		ewarn "/tmp is not writable; unable to clean up underlying /run"
-		return 1
-	fi
-	# Now we know that we can modify /tmp and /
-	# if mktemp -d fails, it returns an EMPTY string
-	# STDERR: mktemp: failed to create directory via template ‘/tmp/tmp.XXXXXXXXXX’: Read-only file system
-	# STDOUT: ''
-	rc=0
-	dir=$(mktemp -d)
-	if [ -n "$dir" -a -d $dir -a -w $dir ]; then
-		mount --bind / $dir && rm -rf $dir/run/* || rc=1
-		umount $dir && rmdir $dir
-	else
-		rc=1
-	fi
-	if [ $rc -ne 0 ]; then
-		ewarn "Could not clean up underlying /run on /"
-		return 1
-	fi
-}
-
 start()
 {
-	# Remove any added console dirs
-	if checkpath -W "$RC_LIBEXECDIR"; then
-		rm -rf "$RC_LIBEXECDIR"/console/*
-	fi
-
-	local logw=false runw=false extra=
+	local logw=false
 	# Ensure that our basic dirs exist
-	if [ "$RC_UNAME" = Linux ]; then
-		# Satisfy Linux FHS
-		extra=/var/lib/misc
-		if [ ! -d /run ]; then
-			extra="/var/run $extra"
-		fi
-	else
-		extra=/var/run
-	fi
-	for x in /var/log /tmp $extra; do
-		if ! [ -d $x ]; then
-			if ! mkdir -p $x; then
-				eend 1 "failed to create needed directory $x"
+	for x in /var/log /var/run /tmp; do
+		if ! [ -d "${x}" ]; then
+			if ! mkdir -p "${x}"; then
+				eend 1 "failed to create needed directory ${x}"
 				return 1
 			fi
-		fi
+		fi 
 	done
 
-	if [ "$RC_UNAME" = Linux -a -d /run ]; then
-		migrate_to_run	/var/lock /run/lock
-		migrate_to_run	/var/run /run
-		clean_run
-	fi
-
-	if checkpath -W /var/run; then
+	if dir_writeable /var/run; then
 		ebegin "Creating user login records"
-		local xtra=
-		[ "$RC_UNAME" = NetBSD ] && xtra=x
-		for x in "" $xtra; do
-			mkutmp /var/run/utmp$x
-		done
-		[ -e /var/log/wtmp ] || mkutmp /var/log/wtmp
+		cp /dev/null /var/run/utmp
+		chgrp utmp /var/run/utmp
+		chmod 0664 /var/run/utmp
+		if dir_writeable /var/log; then
+			logw=true
+			[ -e /var/log/wtmp ] || cp /dev/null /var/log/wtmp
+			chgrp utmp /var/log/wtmp
+			chmod 0664 /var/log/wtmp
+		fi
 		eend 0
 
-		mountinfo -q -f tmpfs /var/run || cleanup_var_run_dir
+		ebegin "Cleaning /var/run"
+		for x in $(find /var/run ! -type d ! -name utmp \
+			! -name random-seed ! -name dev.db \
+			! -name ld-elf.so.hints ! -name ld.so.hints);
+		do
+			# Clean stale sockets
+			if [ -S "${x}" ]; then
+				if type fuser >/dev/null 2>&1; then
+					fuser "${x}" 2>/dev/null || rm "${x}"
+				else
+					rm "${x}"
+				fi
+			fi
+			[ ! -f "${x}" ] && continue
+			# Do not remove pidfiles of already running daemons
+			case "${x}" in
+				*.pid)
+					start-stop-daemon --test --quiet \
+					--stop --pidfile "${x}" && continue
+				;;
+			esac
+			rm -f -- "${x}"
+		done
+		eend 0
 	fi
 
 	# Clean up /tmp directories
 	local tmp=
-	for tmp in ${clean_tmp_dirs:-${wipe_tmp_dirs-/tmp}}; do
-		mountinfo -q -f tmpfs "$tmp" || cleanup_tmp_dir "$tmp"
+	for tmp in ${wipe_tmp_dirs-/tmp}; do
+		cleanup_tmp_dir "${tmp}"
 	done
 
-	if checkpath -W /tmp; then
+	if dir_writeable /tmp; then
 		# Make sure our X11 stuff have the correct permissions
 		# Omit the chown as bootmisc is run before network is up
 		# and users may be using lame LDAP auth #139411
-		rm -rf /tmp/.ICE-unix /tmp/.X11-unix
+		rm -rf /tmp/.ICE-unix /tmp/.X11-unix 
 		mkdir -p /tmp/.ICE-unix /tmp/.X11-unix
 		chmod 1777 /tmp/.ICE-unix /tmp/.X11-unix
-		if [ -x /sbin/restorecon ]; then
-			restorecon /tmp/.ICE-unix /tmp/.X11-unix
-		fi
-	fi
-
-	if yesno $log_dmesg; then
-		if $logw || checkpath -W /var/log; then
-			# Create an 'after-boot' dmesg log
-			case "$RC_SYS" in
-				VSERVER|OPENVZ|LXC|SYSTEMD-NSPAWN) ;;
-				*)
-					if yesno ${previous_dmesg:-no}; then
-						mv /var/log/dmesg /var/log/dmesg.old
-					fi
-					dmesg > /var/log/dmesg
-					chmod 640 /var/log/dmesg
-					;;
-			esac
+		[ -x /sbin/restorecon ] && restorecon /tmp/.ICE-unix /tmp/.X11-unix
+	fi
+
+	if ${logw} || dir_writeable /var/log; then
+		# Create an 'after-boot' dmesg log
+		if [ "${RC_SYS}" != "VSERVER" -a "${RC_SYS}" != "OPENVZ" ]; then
+			dmesg > /var/log/dmesg
+			chmod 640 /var/log/dmesg
 		fi
 	fi
 
+	rm -f /etc/nologin
 	return 0
 }
 
 stop()
 {
 	# Write a halt record if we're shutting down
-	if [ "$RC_RUNLEVEL" = shutdown ]; then
-		[ "$RC_UNAME" = Linux ] && openrc-shutdown -w
-		if [ "$RC_SYS" = OPENVZ ]; then
-			yesno $RC_REBOOT && printf "" >/reboot
-		fi
-	fi
+	case "${RC_RUNLEVEL}" in
+		reboot|shutdown) [ "${RC_UNAME}" = "Linux" ] && halt -w;;
+	esac
 
 	return 0
 }
-
-# vim: ft=sh

init.d/consolefont.in

@@ -1,37 +1,33 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Sets a font for the consoles."
 
 depend()
 {
 	need localmount termencoding
-	after hotplug bootmisc modules
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	after hotplug
+	keyword noopenvz noprefix nouml novserver noxenu
 }
 
 start()
 {
+	# Forget about any font until we are successful
+	rm -rf "${RC_LIBDIR}"/console
+
 	ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 	consolefont=${consolefont:-${CONSOLEFONT}}
 	unicodemap=${unicodemap:-${UNICODEMAP}}
 	consoletranslation=${consoletranslation:-${CONSOLETRANSLATION}}
 
-	if [ -z "$consolefont" ]; then
+	if [ -z "${consolefont}" ]; then
 		ebegin "Using the default console font"
 		eend 0
 		return 0
 	fi
 
-	if [ "$ttyn" = 0 ]; then
+	if [ "${ttyn}" = 0 ]; then
 		ebegin "Skipping font setup (rc_tty_number == 0)"
 		eend 0
 		return 0
@@ -40,31 +36,39 @@ start()
 	local x= param= sf_param= retval=0 ttydev=/dev/tty
 
 	# Get additional parameters
-	if [ -n "$consoletranslation" ]; then
-		param="$param -m $consoletranslation"
+	if [ -n "${consoletranslation}" ]; then
+		param="${param} -m ${consoletranslation}"
 	fi
 	if [ -n "${unicodemap}" ]; then
-		param="$param -u $unicodemap"
+		param="${param} -u ${unicodemap}"
 	fi
 
 	# Set the console font
-	ebegin "Setting console font [$consolefont]"
+	ebegin "Setting console font [${consolefont}]"
 	[ -d /dev/vc ] && ttydev=/dev/vc/
 	x=1
-	while [ $x -le $ttyn ]; do
-		if ! setfont $consolefont $param -C $ttydev$x >/dev/null; then
-			retval=1
-			break
-		fi
-		: $(( x += 1 ))
+	while [ ${x} -le ${ttyn} ]; do
+		setfont ${consolefont} ${param} -C ${ttydev}${x} >/dev/null 
+		retval=$((${retval} + $?))
+		x=$((${x} + 1))
 	done
-	eend $retval
+	eend ${retval}
+
+	# Store the last font so we can use it ASAP on boot
+	if [ ${retval} -eq 0 -a -w "${RC_LIBDIR}" ]; then
+		mkdir -p "${RC_LIBDIR}"/console
+		for font in /usr/share/consolefonts/"${consolefont}".*; do
+			:
+		done
+		cp "${font}" "${RC_LIBDIR}"/console
+		echo "${font##*/}" > "${RC_LIBDIR}"/console/font
+		if yesno ${unicode:-${UNICODE}}; then
+			echo "" > "${RC_LIBDIR}"/console/unicode
+		else
+			rm -f "${RC_LIBDIR}"/console/unicode
+		fi
 
-	# Store the font so we can use it ASAP on boot
-	if [ $retval -eq 0 ] && checkpath -W "$RC_LIBEXECDIR"; then
-		mkdir -p "$RC_LIBEXECDIR"/console
-		setfont -O "$RC_LIBEXECDIR"/console/font
 	fi
 
-	return $retval
+	return ${retval}
 }

init.d/devd.in

@@ -1,23 +1,16 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 command=/sbin/devd
-command_args=$devd_args
+command_args=${devd_args}
 name="Device State Change Daemon"
 
 depend() {
 	need localmount
 	after bootmisc
 	before net.lo0
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start_pre() {

init.d/devdb.in

@@ -1,25 +1,17 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2008-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Creates the dev database"
 
 depend()
 {
-	after clock
 	need localmount
 }
 
 start()
 {
-	ebegin "Building the dev database"
+	ebegin "Bulding the dev database"
 	if [ /var/run/dev.db -nt /dev ]; then
 		:
 	else

init.d/devfs.in

@@ -1,128 +1,36 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
-description="Set up the /dev directory"
+description="Mount system critical filesystems in /dev."
 
-depend()
-{
-	provide dev-mount
-	before dev
-	keyword -docker -lxc -prefix -systemd-nspawn -vserver
+depend() {
+	use dev
+	keyword noprefix
 }
 
-mount_dev()
-{
-	local action=--mount devfstype msg=Mounting
-	# Some devices require exec, Bug #92921
-	local mountopts="exec,nosuid,mode=0755"
-	if yesno ${skip_mount_dev:-no} ; then
-		einfo "/dev will not be mounted due to user request"
-		return 0
-	fi
-	if mountinfo -q /dev; then
-		action=--remount
-		mountopts="remount,$mountopts"
-		msg=Remounting
-	fi
-	if fstabinfo -q /dev; then
-		ebegin "$msg /dev according to @SYSCONFDIR@/fstab"
-		fstabinfo -q $action /dev
-		eend $?
-		return 0
-	fi
-	if grep -q devtmpfs /proc/filesystems; then
-		devfstype=devtmpfs
-		mountopts="$mountopts,size=10M"
-	elif grep -q tmpfs /proc/filesystems; then
-		devfstype=tmpfs
-		mountopts="$mountopts,size=10M"
-	fi
-	if [ -n "$devfstype" ]; then
-		ebegin "$msg $devfstype on /dev"
-		mount -n -t $devfstype -o $mountopts dev /dev
-		eend $?
-	else
-		ewarn "This kernel does not have devtmpfs or tmpfs support, and there"
-		ewarn "is no entry for /dev in fstab."
-		ewarn "This means /dev will not be mounted."
-		ewarn "To avoid this message, set CONFIG_DEVTMPFS or CONFIG_TMPFS to y"
-		ewarn "in your kernel configuration or see @SYSCONFDIR@/conf.d/devfs"
-	fi
-	return 0
-}
-
-seed_dev()
-{
-	# Seed /dev with some things that we know we need
-
-	# creating /dev/console, /dev/tty and /dev/tty1 to be able to write
-	# to $CONSOLE with/without bootsplash before udevd creates it
-	[ -c /dev/console ] || mknod -m 600 /dev/console c 5 1
-	[ -c /dev/tty1 ] || mknod -m 620 /dev/tty1 c 4 1
-	[ -c /dev/tty ] || mknod -m 666 /dev/tty c 5 0
-
-	# udevd will dup its stdin/stdout/stderr to /dev/null
-	# and we do not want a file which gets buffered in ram
-	[ -c /dev/null ] || mknod -m 666 /dev/null c 1 3
-
-	# so udev can add its start-message to dmesg
-	[ -c /dev/kmsg ] || mknod -m 660 /dev/kmsg c 1 11
-
-	# extra symbolic links not provided by default
-	[ -e /dev/fd ] || ln -snf /proc/self/fd /dev/fd
-	[ -e /dev/stdin ] || ln -snf /proc/self/fd/0 /dev/stdin
-	[ -e /dev/stdout ] || ln -snf /proc/self/fd/1 /dev/stdout
-	[ -e /dev/stderr ] || ln -snf /proc/self/fd/2 /dev/stderr
-	[ -e /proc/kcore ] && ln -snf /proc/kcore /dev/core
-
-	# Mount required directories as user may not have them in /etc/fstab
+start() {
+	# Mount required stuff as user may not have then in /etc/fstab
 	for x in \
-		"mqueue /dev/mqueue 1777 ,nodev mqueue" \
 		"devpts /dev/pts 0755 ,gid=5,mode=0620 devpts" \
-		"tmpfs /dev/shm 1777 ,nodev,mode=1777 shm" \
+		"tmpfs /dev/shm 1777 ,nodev shm" \
 	; do
-		set -- $x
+		set -- ${x}
 		grep -Eq "[[:space:]]+$1$" /proc/filesystems || continue
-		mountinfo -q $2 && continue
+		mountinfo -q "$2" && continue
 
-		if [ ! -d $2 ]; then
-			mkdir -m $3 -p $2 >/dev/null 2>&1 || \
+		if [ ! -d "$2" ]; then
+			mkdir -m "$3" -p "$2" >/dev/null 2>&1 || \
 				ewarn "Could not create $2!"
 		fi
 
-		if [ -d $2 ]; then
+		if [ -d "$2" ]; then
 			ebegin "Mounting $2"
-			if ! fstabinfo --mount $2; then
-				mount -n -t $1 -o noexec,nosuid$4 $5 $2
+			if ! fstabinfo --mount "$2"; then
+				mount -n -t "$1" -o noexec,nosuid"$4" "$5" "$2"
 			fi
 			eend $?
 		fi
 	done
-}
-
-restorecon_dev()
-{
-	if [ -x /sbin/restorecon ]; then
-		ebegin "Restoring SELinux contexts in /dev"
-		restorecon -rF /dev >/dev/null 2>&1
-		eend $?
-	fi
-
-	return 0
-}
-
-start()
-{
-	mount_dev
-	seed_dev
-	restorecon_dev
 	return 0
 }

init.d/dmesg.in

@@ -1,25 +1,17 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Set the dmesg level for a cleaner boot"
 
 depend()
 {
 	before dev modules
-	keyword -docker -lxc -prefix -systemd-nspawn -vserver
 }
 
 start()
 {
-	if [ -n "$dmesg_level" ]; then
-		dmesg -n$dmesg_level
+	if [ -n "${dmesg_level}" ]; then
+		dmesg -n"${dmesg_level}"
 	fi
 }

init.d/dumpon.in

@@ -1,33 +1,25 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Configures a specific kernel dump device."
 
 depend() {
-	after clock
 	need swap
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start() {
 	# Setup any user requested dump device
-	if [ -n "$dump_device" ]; then
-		ebegin "Activating kernel core dump device ($dump_device)"
+	if [ -n "${dump_device}" ]; then
+		ebegin "Activating kernel core dump device (${dump_device})"
 		dumpon ${dump_device}
 		eend $?
 	fi
 }
 
 stop() {
-	ebegin "Deactivating kernel core dump device"
+	ebegin "Deactiving kernel core dump device"
 	dumpon off
 	eend $?
 }

init.d/encswap.in

@@ -1,43 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright 1992-2012 FreeBSD Project
-# Released under the 2-clause BSD license
-
-depend() {
-	before swap
-}
-
-start() {
-	while read device mountpoint type options rest ; do
-		case ":${device}:${type}:${options}" in
-		:#*)
-			;;
-		*.bde:swap:sw)
-			passphrase=$(dd if=/dev/random count=1 2>/dev/null | md5 -q)
-			device="${device%.bde}"
-			gbde init "${device}" -P "${passphrase}" || return 1
-			gbde attach "${device}" -p "${passphrase}" || return 1
-			;;
-		*.eli:swap:sw)
-			device="${device%.eli}"
-			geli onetime ${geli_swap_flags} "${device}" || return 1
-			;;
-		esac
-	done < /etc/fstab
-}
-
-stop() {
-	while read device mountpoint type options rest ; do
-		case ":${device}:${type}:${options}" in
-		:#*)
-			;;
-		*.bde:swap:sw)
-			device="${device%.bde}"
-			gbde detach "${device}"
-			;;
-		*.eli:swap:sw)
-			# Nothing here, because geli swap devices should be
-			# created with the auto-detach-on-last-close option.
-			;;
-		esac
-	done < /etc/fstab
-}

init.d/fsck.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Check and repair filesystems according to /etc/fstab"
 _IFS="
@@ -15,29 +8,23 @@ _IFS="
 
 depend()
 {
-	after clock
 	use dev clock modules
-	keyword -docker -jail -lxc -openvz -prefix -systemd-nspawn -timeout -vserver -uml
+	keyword nojail noopenvz noprefix notimeout novserver
 }
 
 _abort() {
-	yesno ${fsck_abort_on_errors:-yes} && rc-abort
+	rc-abort
 	return 1
 }
 
 # We should only reboot when first booting
 _reboot() {
-	if [ "$RC_RUNLEVEL" = "$RC_BOOTLEVEL" ]; then
+	if [ "${RC_RUNLEVEL}" = "${RC_BOOTLEVEL}" ]; then
 		reboot "$@"
 		_abort || return 1
 	fi
 }
 
-_forcefsck()
-{
-	[ -e /forcefsck ] || get_bootparam forcefsck
-}
-
 start()
 {
 	local fsck_opts= p= check_extra=
@@ -46,74 +33,55 @@ start()
 		ewarn "Skipping fsck due to /fastboot"
 		return 0
 	fi
-	if _forcefsck; then
-		fsck_opts="$fsck_opts -f"
+	if [ -e /forcefsck ] || get_bootparam forcefsck; then
+		fsck_opts="${fsck_opts} -f"
 		check_extra="(check forced)"
-	elif ! yesno ${fsck_on_battery:-YES} && ! on_ac_power; then
-		ewarn "Skipping fsck due to not being on AC power"
-		return 0
 	fi
 
-	if [ -n "$fsck_passno" ]; then
-		check_extra="[passno $fsck_passno] $check_extra"
-		if [ -n "$fsck_mnt" ]; then
-			eerror "Only 1 of fsck_passno and fsck_mnt must be set!"
-			return 1
-		fi
+	if [ -n "${fsck_passno}" ]; then
+		check_extra="[passno ${fsck_passno}] ${check_extra}"
 	fi
-	ebegin "Checking local filesystems $check_extra"
-	# Append passno mounts
-	for p in $fsck_passno; do
-		local IFS="$_IFS"
-		case "$p" in
-			[0-9]*) p="=$p";;
+	ebegin "Checking local filesystems ${check_extra}"
+	for p in ${fsck_passno}; do
+		local IFS="${_IFS}"
+		case "${p}" in
+			[0-9]*) p="=${p}";;
 		esac
-		set -- "$@" $(fstabinfo --passno "$p")
-		unset IFS
-	done
-	# Append custom mounts
-	for m in $fsck_mnt ; do
-		local IFS="$_IFS"
-		set -- "$@" "$m"
+		set -- "$@" $(fstabinfo --passno "${p}")
 		unset IFS
 	done
 
-	if [ "$RC_UNAME" = Linux ]; then
-		local skiptypes
-		skiptypes=$(printf 'no%s,' ${net_fs_list} ${extra_net_fs_list})
-		[ "${skiptypes}" = "no," ] && skiptypes=""
-		fsck_opts="$fsck_opts -C0 -T -t ${skiptypes}noopts=_netdev"
-		if [ -z "$fsck_passno" -a -z "$fsck_mnt" ]; then
-			fsck_args=${fsck_args:--A -p}
+	if [ "${RC_UNAME}" = "Linux" ]; then
+		fsck_opts="${fsck_opts} -C0 -T"
+		if [ -z "${fsck_passno}" ]; then
+			fsck_args=${fsck_args--A -p}
 			if echo 2>/dev/null >/.test.$$; then
 				rm -f /.test.$$
-				fsck_opts="$fsck_opts -R"
+				fsck_opts="${fsck_opts} -R"
 			fi
 		fi
 	fi
 
 	trap : INT QUIT
-	fsck ${fsck_args:--p} $fsck_opts "$@"
+	fsck ${fsck_args--p} ${fsck_opts} "$@"
 	case $? in
 	0)	eend 0; return 0;;
 	1)	ewend 1 "Filesystems repaired"; return 0;;
-	2|3)	if [ "$RC_UNAME" = Linux ]; then
+	2|3)	if [ "${RC_UNAME}" = "Linux" ]; then
 		 	ewend 1 "Filesystems repaired, but reboot needed"
 	         	_reboot -f
 		else
-			ewend 1 "Filesystems still have errors;" \
-				"manual fsck required"
-			_abort
+			ewend 1 "Filesystems still have errors; manual fsck required"
 		fi;;
-	4)	if [ "$RC_UNAME" = Linux ]; then
-			ewend 1 "Fileystem errors left uncorrected, aborting"
-			_abort
+	4)	if [ "${RC_UNAME}" = "Linux" ]; then
+			ewend 1 "Fileystem errors left uncorrected"
+			return 0
 		else
 		 	ewend 1 "Filesystems repaired, but reboot needed"
 			_reboot
 		fi;;
 	8)	ewend 1 "Operational error"; return 0;;
-	12)	ewend 1 "fsck interrupted";;
+	12)	ewend 1 "fsck interupted";;
 	*)	eend 2 "Filesystems couldn't be fixed";;
 	esac
 	_abort || return 1
@@ -124,8 +92,7 @@ stop()
 	# Fake function so we always shutdown correctly.
 	_abort() { return 0; }
 	_reboot() { return 0; }
-	_forcefsck() { return 1; }
 
-	yesno $fsck_shutdown && start
+	yesno "${fsck_shutdown}" && start
 	return 0
 }

init.d/hostid.in

@@ -1,23 +1,15 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 extra_commands="reset"
-: ${hostid_file:=/etc/hostid}
+hostid_file=${hostid_file:-/etc/hostid}
 
 depend()
 {
-	use root
-	after clock
+	need root
 	before devd net
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 _set()
@@ -28,14 +20,14 @@ _set()
 		id=$(echo "$1" | md5)
 		id="0x${id%????????????????????????}"
 	fi
-	ebegin "Setting Host ID: $id"
-	sysctl -w kern.hostid="$id" >/dev/null
+	ebegin "Setting Host ID: ${id}"
+	sysctl -w kern.hostid="${id}" >/dev/null
 	eend $? || return 1
 
 	if sysctl -n kern.hostuuid >/dev/null 2>&1; then
 		[ -n "$1" ] && id=$1
-		ebegin "Setting Host UUID: $id"
-		sysctl kern.hostuuid="$id" >/dev/null
+		ebegin "Setting Host UUID: ${id}"
+		sysctl kern.hostuuid="${id}" >/dev/null
 		eend $? || return 1
 	fi
 
@@ -46,37 +38,37 @@ _set()
 # otherwise we generate a random UUID.
 reset()
 {
-	local uuid= x="[0-9a-f]" y="$x$x$x$x"
+	local uuid= x="[0-9a-f]" y="${x}${x}${x}${x}"
 
-	if command -v kenv >/dev/null 2>&1; then
+	if type kenv >/dev/null 2>&1; then
 		uuid=$(kenv smbios.system.uuid 2>/dev/null)
 	fi
-	case "$uuid" in
-		$y$y-$y-$y-$y-$y$y$y);;
+	case "${uuid}" in
+		${y}${y}-${y}-${y}-${y}-${y}${y}${y});;
 		*) uuid=;;
 	esac
 
-	if [ -n "$uuid" ]; then
-		rm -f "$hostid_file"
+	if [ -n "${uuid}" ]; then
+		rm -f "${hostid_file}"
 	else
 		uuid=$(uuidgen)
-		if [ -z "$uuid" ]; then
+		if [ -z "${uuid}" ]; then
 			eerror "Unable to generate a UUID"
 			return 1
 		fi
-		if ! echo "$uuid" >"$hostid_file"; then
-			eerror "Failed to store UUID in \`$hostid_file'"
+		if ! echo "${uuid}" > "${hostid_file}"; then
+			eerror "Failed to store UUID in \`${hostid_file}'"
 			return 1
 		fi
 	fi
 
-	_set "$uuid"
+	_set "${uuid}"
 }
 
 start()
 {
-	if [ -r "$hostid_file" ]; then
-		_set $(cat "$hostid_file")
+	if [ -r "${hostid_file}" ]; then
+		_set $(cat "${hostid_file}") 
 	else
 		reset
 	fi

init.d/hostname.in

@@ -1,37 +1,17 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Sets the hostname of the machine."
 
 depend() {
-	after clock
-	keyword -docker -lxc -prefix -systemd-nspawn
+	keyword noprefix
 }
 
 start()
 {
-	local h source x
-	if [ -s @SYSCONFDIR@/hostname ] && [ -r @SYSCONFDIR@/hostname ]; then
-	read h x <@SYSCONFDIR@/hostname
-	source=" from @SYSCONFDIR@/hostname"
-	else
-		# HOSTNAME variable used to be defined in caps in conf.d/hostname.
-		# It is also a magic variable in bash.
-		h=${hostname-${HOSTNAME}} # checkbashisms: false positive
-	fi
-	if [ -z "$h" ]; then
-		einfo "Using default system hostname"
-		return 0
-	fi
-	ebegin "Setting hostname to $h $source"
-	hostname "$h"
+	hostname=${hostname-${HOSTNAME-localhost}}
+	ebegin "Setting hostname to ${hostname}"
+	hostname "${hostname}"
 	eend $? "Failed to set the hostname"
 }

init.d/hwclock.in

@@ -1,25 +1,19 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 extra_commands="save show"
 
-description="Sets the local clock to UTC or Local Time."
+description="Sets the local clock to UTC or Local Time." 
 description_save="Saves the current time in the BIOS."
 description_show="Displays the current time in the BIOS."
 
-: ${clock_adjfile:=${CLOCK_ADJFILE}}
-: ${clock_args:=${CLOCK_OPTS}}
-: ${clock_systohc:=${CLOCK_SYSTOHC}}
-: ${clock:=${CLOCK:-UTC}}
-if [ "$clock" = "UTC" ]; then
+clock_adjfile=${clock_adjfile:-${CLOCK_ADJFILE}}
+clock_args=${clock_args:-${CLOCK_OPTS}}
+clock_systohc=${clock_systohc:-${CLOCK_SYSTOHC}}
+
+clock=${clock:-${CLOCK:-UTC}}
+if [ "${clock}" = "UTC" ]; then
 	utc="UTC"
 	utc_cmd="--utc"
 else
@@ -30,11 +24,12 @@ fi
 depend()
 {
 	provide clock
-	want modules
-	if yesno $clock_adjfile; then
+	if yesno ${clock_adjfile}; then
 		use root
+	else
+		before *
 	fi
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	keyword noopenvz noprefix nouml novserver noxenu
 }
 
 setupopts()
@@ -52,7 +47,7 @@ setupopts()
 			;;
 	esac
 
-	case "$utc" in
+	case "${utc}" in
 		UTC|Local" "Time);;
 		*) unset utc_cmd;;
 	esac
@@ -63,67 +58,48 @@ _hwclock()
 {
 	local err="$(hwclock "$@" 2>&1 >/dev/null)"
 
-	[ -z "$err" ] && return 0
+	[ -z "${err}" ] && return 0
 	echo "${err}" >&2
 	return 1
 }
 
-get_noadjfile()
-{
-	if ! yesno $clock_adjfile; then
-		# Some implementations don't handle adjustments
-		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
-			echo --noadjfile
-		fi
-	fi
-}
-
-rtc_exists()
-{
-	local rtc=
-	for rtc in /dev/rtc /dev/rtc[0-9]*; do
-		[ -e "$rtc" ] && break
-	done
-	[ -e "$rtc" ]
-}
-
 start()
 {
-	local retval=0 errstr="" modname
+	local retval=0 errstr=""
 	setupopts
 
-	if [ -z "$utc_cmd" ]; then
-		ewarn "Not setting clock for $utc system"
+	if [ -z "${utc_cmd}" ]; then
+		ewarn "Not setting clock for ${utc} system"
 		return 0
 	fi
 
-	ebegin "Setting system clock using the hardware clock [$utc]"
+	ebegin "Setting system clock using the hardware clock [${utc}]"
 	if [ -e /proc/modules ]; then
-		if ! rtc_exists; then
-			for x in rtc-cmos rtc genrtc; do
-				modprobe -q $x && rtc_exists && modname="$x" && break
-			done
-			[ -n "$modname" ] &&
-				ewarn "The $modname module needs to be configured in" \
-					"@SYSCONFDIR@/conf.d/modules or built in."
+		local rtc=
+		for rtc in /dev/rtc /dev/rtc[0-9]*; do
+			[ -e "${rtc}" ] && break
+		done
+		if [ ! -e "${rtc}" ]; then
+			modprobe -q rtc-cmos || modprobe -q rtc || modprobe -q genrtc
 		fi
 	fi
 
-	# Always set the kernel's time zone.
-	_hwclock --systz $utc_cmd $(get_noadjfile) $clock_args
-	: $(( retval += $? ))
-
-	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
-		_hwclock --adjust $utc_cmd $(get_noadjfile)
-		: $(( retval += $? ))
+	if [ -e /etc/adjtime ] && yesno ${clock_adjfile}; then
+		_hwclock --adjust ${utc_cmd}
+		retval=$((${retval} + $?))
 	fi
-
-	if yesno ${clock_hctosys:-YES}; then
-		_hwclock --hctosys $utc_cmd $(get_noadjfile) $clock_args
-		: $(( retval += $? ))
+	
+	# If setting UTC, don't bother to run hwclock when first booting
+	# as that's the default
+	if [ "${PREVLEVEL}" != "N" -o \
+		"${utc_cmd}" != "--utc" -o \
+		-n "${clock_args}" ];
+	then
+		_hwclock --hctosys ${utc_cmd} ${clock_args}
+		retval=$((${retval} + $?))
 	fi
-
-	eend $retval "Failed to set the system clock"
+	
+	eend ${retval} "Failed to set the system clock"
 
 	return 0
 }
@@ -131,30 +107,37 @@ start()
 stop()
 {
 	# Don't tweak the hardware clock on LiveCD halt.
-	[ -n "$CDBOOT" ] && return 0
-	yesno ${clock_systohc:-YES} || return 0
+	[ -n "${CDBOOT}" ] && return 0
+	yesno ${clock_systohc} || return 0
 
 	local retval=0 errstr=""
 	setupopts
 
-	[ -z "$utc_cmd" ] && return 0
+	[ -z "${utc_cmd}" ] && return 0
 
-	ebegin "Setting hardware clock using the system clock" "[$utc]"
+	ebegin "Setting hardware clock using the system clock" "[${utc}]"
 
-	_hwclock --systohc $utc_cmd $(get_noadjfile) $clock_args
+	if ! yesno "${clock_adjfile}"; then
+		# Some implementations don't handle adjustments
+		if LC_ALL=C hwclock --help | grep -q "\-\-noadjfile"; then
+			utc_cmd="${utc_cmd} --noadjfile"
+		fi
+	fi
+
+	_hwclock --systohc ${utc_cmd} ${clock_args}
 	retval=$?
 
-	eend $retval "Failed to sync clocks"
+	eend ${retval} "Failed to sync clocks" 
 }
 
 save()
 {
-	clock_systohc=yes
+	clock_systohc="yes"
 	stop
 }
 
 show()
 {
 	setupopts
-	hwclock --show "$utc_cmd" $(get_noadjfile) $clock_args
+	hwclock --show "${utc_cmd}" ${clock_args} 
 }

init.d/ipfw.in

@@ -1,13 +1,6 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 # This is based on /etc/rc.firewall and /etc/rc.firewall6 from FreeBSD
 
@@ -15,12 +8,12 @@ ipfw_ip_in=${ipfw_ip_in-any}
 ipfw_ports_in=${ipfw_ports_in-auth ssh}
 ipfw_ports_nolog=${ipfw_ports_nolog-135-139,445 1026,1027 1433,1434}
 
-extra_commands="panic showstatus"
+opts="panic showstatus"
 
 depend() {
 	before net
 	provide firewall
-	keyword -jail
+	keyword nojail
 }
 
 ipfw() {
@@ -47,11 +40,11 @@ init() {
 	ipfw add deny all from any to 127.0.0.0/8
 	ipfw add deny ip from 127.0.0.0/8 to any
 
-	if have_ip6; then
+	if have_ip6; then 
 		ipfw add pass ip6 from any to any via lo0
 		ipfw add deny ip6 from any to ::1
 		ipfw add deny ip6 from ::1 to any
-
+	
 		ipfw add pass ip6 from :: to ff02::/16 proto ipv6-icmp
 		ipfw add pass ip6 from fe80::/10 to fe80::/10 proto ipv6-icmp
 		ipfw add pass ip6 from fe80::/10 to ff02::/16 proto ipv6-icmp
@@ -66,7 +59,7 @@ start() {
 		return 1
 	fi
 
-	# Use a stateful firewall
+	# Use a statefull firewall
 	ipfw add check-state
 	ipfw add pass tcp from me to any established
 
@@ -85,7 +78,7 @@ start() {
 	ipfw add pass udp  from 0.0.0.0 68 to 255.255.255.255 67 out
 	ipfw add pass udp  from any 67     to me 68 in
 	ipfw add pass udp  from any 67     to 255.255.255.255 68 in
-	# Some servers will ping the IP while trying to decide if it's
+	# Some servers will ping the IP while trying to decide if it's 
 	# still in use.
 	ipfw add pass icmp from any to any icmptype 8
 
@@ -95,51 +88,51 @@ start() {
 	if have_ip6; then
 		# Allow ICMPv6 destination unreach
 		ipfw add pass ip6 from any to any icmp6types 1 proto ipv6-icmp
-
+	
 		# Allow NS/NA/toobig (don't filter it out)
 		ipfw add pass ip6 from any to any icmp6types 2,135,136 proto ipv6-icmp
 	fi
-
+	
 	# Add permits for this workstations published services below
 	# Only IPs and nets in firewall_allowservices is allowed in.
-	for i in $ipfw_ip_in; do
-		for p in $ipfw_ports_in; do
-			ipfw add pass tcp from $i to me $p
+	for i in ${ipfw_ip_in}; do
+		for p in ${ipfw_ports_in}; do
+			ipfw add pass tcp from ${i} to me ${p}
 		done
 	done
 
 	# Allow all connections from trusted IPs.
 	# Playing with the content of firewall_trusted could seriously
 	# degrade the level of protection provided by the firewall.
-	for i in $ipfw_ip_trust; do
-		ipfw add pass ip from $i to me
+	for i in ${ipfw_ip_trust}; do
+		ipfw add pass ip from ${i} to me
 	done
-
+	
 	ipfw add 65000 count ip from any to any
 
 	# Drop packets to ports where we don't want logging
-	for p in $ipfw_ports_nolog; do
-		ipfw add deny { tcp or udp } from any to any $p in
+	for p in ${ipfw_ports_nolog}; do
+		ipfw add deny { tcp or udp } from any to any ${p} in
 	done
 
 	# Broadcasts and muticasts
 	ipfw add deny ip from any to 255.255.255.255
-	ipfw add deny ip from any to 224.0.0.0/24
+	ipfw add deny ip from any to 224.0.0.0/24 
 
 	# Noise from routers
 	ipfw add deny udp from any to any 520 in
 
 	# Noise from webbrowsing.
-	# The stateful filter is a bit aggressive, and will cause some
+	# The statefull filter is a bit agressive, and will cause some
 	# connection teardowns to be logged.
 	ipfw add deny tcp from any 80,443 to any 1024-65535 in
 
 	# Deny and (if wanted) log the rest unconditionally.
 	if yesno ${ipfw_log_deny:-no}; then
-		log=log
+		log="log"
 		sysctl net.inet.ip.fw.verbose=1 >/dev/null
 	fi
-	ipfw add deny $log ip from any to any
+	ipfw add deny ${log} ip from any to any
 
 	eend 0
 }

init.d/keymaps.in

@@ -1,34 +1,26 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Applies a keymap for the consoles."
 
+ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
+unicode=${unicode:-${UNICODE}}
+keymap=${keymap:-${KEYMAP}}
+extended_keymaps=${extended_keymaps:-${EXTENDED_KEYMAPS}}
+windowkeys=${windowkeys:-${SET_WINDOWSKEYS}} 
+fix_euro=${fix_euro:-${FIX_EURO}}
+dumpkeys_charset=${dumpkeys_charset:-${DUMPKEYS_CHARSET}}
+
 depend()
 {
 	need localmount termencoding
-	after bootmisc clock
-	keyword -docker -lxc -openvz -prefix -systemd-nspawn -uml -vserver -xenu
+	keyword noopenvz noprefix nouml novserver noxenu
 }
 
 start()
 {
-	ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
-	: ${unicode:=$UNICODE}
-	: ${keymap:=$KEYMAP}
-	: ${extended_keymaps:=$EXTENDED_KEYMAPS}
-	: ${windowkeys:=$SET_WINDOWSKEYS}
-	: ${fix_euro:=$FIX_EURO}
-	: ${dumpkeys_charset:=${DUMPKEYS_CHARSET}}
-
-	if [ -z "$keymap" ]; then
+	if [ -z "${keymap}" ]; then
 		eerror "You need to setup keymap in /etc/conf.d/keymaps first"
 		return 1
 	fi
@@ -41,37 +33,35 @@ start()
 		echo 1 > /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
 	fi
 
-	local wkeys= kmode="-a" msg="ASCII"
-	if yesno $unicode; then
+	ebegin "Loading key mappings [${keymap}]"
+	local loadkeys_uni= wkeys= kmode="-a" msg="ASCII"
+	if yesno ${unicode}; then
+		loadkeys_uni="--unicode"
 		kmode="-u"
 		msg="UTF-8"
 	fi
-	yesno $windowkeys && wkeys="windowkeys"
-
-	# Set terminal encoding to either ASCII or UNICODE.
-	# See utf-8(7) for more information.
-	ebegin "Setting keyboard mode [$msg]"
-	n=1
-	while [ $n -le $ttyn ]; do
-		kbd_mode $kmode -C $ttydev$n
-		: $(( n += 1 ))
-	done
-	eend 0
-
-	ebegin "Loading key mappings [$keymap]"
-	loadkeys -q $wkeys $keymap $extended_keymaps
+	yesno ${windowkeys} && wkeys="windowkeys"
+	loadkeys -q ${loadkeys_uni} ${wkeys} ${keymap} ${extended_keymaps} 
 	eend $? "Error loading key mappings" || return $?
 
-	if yesno $fix_euro; then
+	if yesno ${fix_euro}; then
 		ebegin "Fixing font for euro symbol"
 		# Fix some fonts displaying the Euro, #173528.
-		echo "altgr keycode 18 = U+20AC" | loadkeys -q -
+		echo "altgr keycode 18 = U+20AC" | loadkeys -q
 		eend $?
 	fi
 
-	# Save the keymapping for use immediately at boot
-	if checkpath -W "$RC_LIBEXECDIR"; then
-		mkdir -p "$RC_LIBEXECDIR"/console
-		dumpkeys >"$RC_LIBEXECDIR"/console/keymap
+	# Set terminal encoding to either ASCII or UNICODE.
+	# See utf-8(7) for more information.
+	ebegin "Setting keyboard mode [${msg}]"
+	if yesno ${unicode}; then
+		dumpkeys ${dumpkeys_charset:+-c} \
+			${dumpkeys_charset} | loadkeys --unicode
 	fi
+	n=1
+	while [ ${n} -le "${ttyn}" ]; do
+		kbd_mode "${kmode}" -C "${ttydev}${n}"
+		n=$((${n} + 1))
+	done
+	eend 0
 }

init.d/killprocs.in

@@ -1,27 +1,22 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Kill all processes so we can unmount disks cleanly."
 
 depend()
 {
-	keyword -prefix
+	keyword noprefix
 }
 
 start()
 {
 	ebegin "Terminating remaining processes"
-	kill_all 15 ${killall5_opts}
+	killall5 -15
+	sleep 1
 	eend 0
-	ebegin "Killing remaining processes"
-	kill_all 9 ${killall5_opts}
+	ebegin "Killing remaining processes"	
+	killall5 -9
+	sleep 1
 	eend 0
 }

init.d/local.in

@@ -1,93 +1,43 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
-description="Executes user programs in @SYSCONFDIR@/local.d"
+description="Executes user commands in /etc/conf.d/local"
 
 depend()
 {
 	after *
-	keyword -timeout
+	keyword notimeout
 }
 
 start()
 {
 	ebegin "Starting local"
 
-	local file has_errors=0 redirect retval
-	yesno $rc_verbose || redirect='> /dev/null 2>&1'
-	eindent
-	for file in @SYSCONFDIR@/local.d/*.start; do
-		if [ -x "${file}" ]; then
-			vebegin "Executing \"${file}\""
-			eval "${file}" $redirect
-			retval=$?
-			if [ ${retval} -ne 0 ]; then
-				has_errors=1
-			fi
-			veend ${retval} "Execution of \"${file}\" failed."
-		fi
-	done
-	eoutdent
-
-	if command -v local_start >/dev/null 2>&1; then
-		ewarn "\"@SYSCONFDIR@/conf.d/local\" should be removed."
-		ewarn "Please move the code from the local_start function"
-		ewarn "to executable scripts with an .start extension"
-		ewarn "in \"@SYSCONFDIR@/local.d\""
+	if type local_start >/dev/null 2>&1; then
 		local_start
 	fi
 
-	eend ${has_errors}
+	# Support old configs
+	if [ -e @SYSCONFDIR@/conf.d/local.start ]; then
+		. @SYSCONFDIR@/conf.d/local.start
+	fi
 
-	# We have to end with a zero exit code, because a failed execution
-	# of an executable @SYSCONFDIR@/local.d/*.start file shouldn't result in
-	# marking the local service as failed. Otherwise we are unable to
-	# execute any executable @SYSCONFDIR@/local.d/*.stop file, because a failed
-	# marked service cannot be stopped (and the stop function would
-	# actually call the executable @SYSCONFDIR@/local.d/*.stop file(s)).
-	return 0
+	eend $? "Failed to start local"
 }
 
 stop()
 {
 	ebegin "Stopping local"
 
-	local file has_errors=0 redirect retval
-	yesno $rc_verbose || redirect='> /dev/null 2>&1'
-	eindent
-	for file in @SYSCONFDIR@/local.d/*.stop; do
-		if [ -x "${file}" ]; then
-			vebegin "Executing \"${file}\""
-			eval "${file}" $redirect
-			retval=$?
-			if [ ${retval} -ne 0 ]; then
-				has_errors=1
-			fi
-			veend ${retval} "Execution of \"${file}\" failed."
-		fi
-	done
-	eoutdent
-
-	if command -v local_stop >/dev/null 2>&1; then
-		ewarn "\"@SYSCONFDIR@/conf.d/local\" should be removed."
-		ewarn "Please move the code from the local_stop function"
-		ewarn "to executable scripts with an .stop extension"
-		ewarn "in \"@SYSCONFDIR@/local.d\""
+	if type local_start >/dev/null 2>&1; then
 		local_stop
 	fi
 
-	eend ${has_errors}
+	# Support old configs
+	if [ -e @SYSCONFDIR@/conf.d/local.stop ]; then
+		. @SYSCONFDIR@/conf.d/local.stop
+	fi
 
-	# An executable @SYSCONFDIR@/local.d/*.stop file which failed with a
-	# non-zero exit status is not a reason to mark this service
-	# as failed, therefore we have to end with a zero exit code.
-	return 0
+	eend $? "Failed to stop local"
 }

init.d/localmount.in

@@ -1,118 +1,69 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2007-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
+#!@PREFIX@/sbin/runscript
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
+# All rights reserved. Released under the 2-clause BSD license.
 
 description="Mounts disks and swap according to /etc/fstab."
 
 depend()
 {
 	need fsck
-	use lvm modules mtab root
-	after clock lvm modules root
-	keyword -docker -jail -lxc -prefix -systemd-nspawn -vserver
+	use lvm modules mtab
+	keyword nojail noopenvz noprefix novserver
 }
 
 start()
 {
 	# Mount local filesystems in /etc/fstab.
-	# The types variable must start with no, and must be a type
-	local critical= types="noproc" x= no_netdev= rc=
-	for x in $net_fs_list $extra_net_fs_list; do
+	local types="noproc" x=
+	for x in ${net_fs_list}; do
 		types="${types},${x}"
 	done
 
-	if [ "$RC_UNAME" = Linux ]; then
-		no_netdev="-O no_netdev"
-		if mountinfo -q /usr; then
-			touch "$RC_SVCDIR"/usr_premounted
-		fi
-	fi
 	ebegin "Mounting local filesystems"
-	mount -at "$types" $no_netdev
+	mount -at "${types}"
 	eend $? "Some local filesystem failed to mount"
-	rc=$?
-	if [ -z "$critical_mounts" ]; then
-		rc=0
-	else
-		for x in ${critical_mounts}; do
-		fstabinfo -q $x || continue
-		if ! mountinfo -q $x; then
-			critical=x
-			eerror "Failed to mount $x"
-		fi
-		done
-		[ -z "$critical" ] && rc=0
-	fi
-	return $rc
+
+	# Always return 0 - some local mounts may not be critical for boot
+	return 0
 }
 
 stop()
 {
-	yesno $RC_GOINGDOWN || return 0
 	# We never unmount / or /dev or $RC_SVCDIR
+	local x= no_umounts_r="/|/dev|/dev/.*|${RC_SVCDIR}"
 
-	# Bug 381783
-	local rc_svcdir=$(printf '%s\n' "$RC_SVCDIR" | sed 's:/lib\(32\|64\)\?/:/lib(32|64)?/:g')
-
-	local x= no_umounts_r="/|/dev|/dev/.*|${rc_svcdir}"
-	no_umounts_r="${no_umounts_r}|/bin|/sbin|/lib(32|64)?|/libexec"
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
-	local IFS="$IFS:"
-	for x in $no_umounts $RC_NO_UMOUNTS; do
-		no_umounts_r="$no_umounts_r|$x"
+	OIFS=${IFS} SIFS=${IFS-y}
+	IFS=$IFS:
+	for x in ${no_umounts} ${RC_NO_UMOUNTS}; do
+		no_umounts_r="${no_umounts_r}|${x}"
 	done
-
-	if [ "$RC_UNAME" = Linux ]; then
-		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/run|/sys|/sys/.*"
-		if [ -e "$rc_svcdir"/usr_premounted ]; then
-			no_umounts_r="$no_umounts_r|/usr"
-		fi
+	if [ "${SIFS}" = "y" ]; then
+		IFS=$OIFS
+	else
+		unset IFS
 	fi
-	no_umounts_r="^($no_umounts_r)$"
+
+	if [ "${RC_UNAME}" = "Linux" ]; then
+		no_umounts_r="${no_umounts_r}|/proc|/proc/.*|/sys|/sys/.*"
+	fi
+	no_umounts_r="^(${no_umounts_r})$"
 
 	# Flush all pending disk writes now
-	sync
+	sync; sync
 
-	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
+	# Try to unmount all tmpfs filesystems not in use, else a deadlock may
+	# occure, bug #13599.
+	# As $RC_SVCDIR may also be tmpfs we cd to it to lock it
+	cd "${RC_SVCDIR}"
+	umount -a -t tmpfs 2>/dev/null
 
-	if [ "$RC_UNAME" = Linux ] && [ -d /sys/fs/aufs ] ; then
-		#if / is aufs we remount it noxino during shutdown
-		if mountinfo -q -f '^aufs$' / ; then
-			mount -o remount,noxino,rw /
-			sync
-		fi
+	. "${RC_LIBDIR}"/sh/rc-mount.sh
 
-		local aufs_branch aufs_mount_point aufs_si_id aufs_br_id branches
-		for aufs_si_dir in /sys/fs/aufs/si*; do
-			[ -d "${aufs_si_dir}" ] || continue
-			aufs_si_id="si=${aufs_si_dir#/sys/fs/aufs/si_}"
-			aufs_mount_point="$(mountinfo -o ${aufs_si_id})"
-			branches="$aufs_si_dir/br[0-9] $aufs_si_dir/br[0-9][0-9] $aufs_si_dir/br[0-9][0-9][0-9]"
-			for x in $branches; do
-				[ -e "${x}" ] || continue
-				aufs_branch=$(sed 's/=.*//g' $x)
-				eindent
-				if ! mount -o "remount,del:$aufs_branch" "$aufs_mount_point" > /dev/null 2>&1; then
-					ewarn "Failed to remove branch $aufs_branch from aufs" \
-					"$aufs_mount_point"
-				fi
-				eoutdent
-				sync
-			done
-		done
-	fi
-
-	# Umount loop devices
-	einfo "Unmounting loop devices"
+	# Umount loopback devices
+	einfo "Unmounting loopback devices"
 	eindent
-	do_unmount "umount -d" --skip-point-regex "$no_umounts_r" \
+	do_unmount "umount -d" --skip-point-regex "${no_umounts_r}" \
 		--node-regex "^/dev/loop"
 	eoutdent
 
@@ -121,12 +72,12 @@ stop()
 	einfo "Unmounting filesystems"
 	eindent
 	local fs=
-	for x in $net_fs_list $extra_net_fs_list; do
-		fs="$fs${fs:+|}$x"
+	for x in ${net_fs_list}; do
+		fs="${fs}${fs:+|}${x}"
 	done
-	[ -n "$fs" ] && fs="^($fs)$"
-	do_unmount umount --skip-point-regex "$no_umounts_r" \
-		"${fs:+--skip-fstype-regex}" $fs --nonetdev
+	[ -n "${fs}" ] && fs="^(${fs})$"
+	do_unmount "umount" --skip-point-regex "${no_umounts_r}" \
+		${fs:+--skip-fstype-regex} ${fs} --nonetdev
 	eoutdent
 
 	return 0

init.d/loopback.in

@@ -1,35 +0,0 @@
-#!@SBINDIR@/openrc-run
-# Copyright (c) 2013-2015 The OpenRC Authors.
-# See the Authors file at the top-level directory of this distribution and
-# https://github.com/OpenRC/openrc/blob/master/AUTHORS
-#
-# This file is part of OpenRC. It is subject to the license terms in
-# the LICENSE file found in the top-level directory of this
-# distribution and at https://github.com/OpenRC/openrc/blob/master/LICENSE
-# This file may not be copied, modified, propagated, or distributed
-# except according to the terms contained in the LICENSE file.
-
-description="Configures the loopback interface."
-
-depend()
-{
-	after clock
-	keyword -jail -prefix -systemd-nspawn -vserver
-}
-
-start()
-{
-	if [ "$RC_UNAME" = Linux ]; then
-		ebegin "Bringing up network interface lo"
-		if command -v ip > /dev/null 2>&1; then
-			ip addr add 127.0.0.1/8 dev lo brd +
-			ip link set lo up
-		else
-			ifconfig lo 127.0.0.1 netmask 255.0.0.0
-		fi
-	else
-		ebegin "Bringing up network interface lo0"
-		ifconfig lo0 127.0.0.1 netmask 255.0.0.0
-	fi
-	eend $?
-}