Fix dist for svn

.gitignore

@@ -1 +0,0 @@
-*.bz2

Makefile

@@ -1,27 +1,12 @@
 # OpenRC Makefile
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
-include Makefile.inc
-
-SUBDIR=		conf.d etc init.d man scripts sh src
-
-# Build our old net foo or not
-_OLDNET_SH=	case "${MKOLDNET}" in \
-		[Yy][Ee][Ss]) echo "net doc";; \
-		*) echo "";; \
-		esac
-_OLDNET!=	${_OLDNET_SH}
-SUBDIR+=	${_OLDNET}$(shell ${_OLDNET_SH})
-
-# Build pkgconfig or not
-_PKGCONFIG_SH=	case "${MKPKGCONFIG}" in \
-		[Yy][Ee][Ss]|"") echo "pkgconfig";; \
-		*) echo "";; \
-		esac
-_PKGCONFIG!=	${_PKGCONFIG_SH}
-SUBDIR+=	${_PKGCONFIG}$(shell ${_PKGCONFIG_SH})
+NAME=		openrc
+VERSION=	0.4.0
+PKG=		${NAME}-${VERSION}
 
+SUBDIR=		conf.d doc etc init.d man net sh src
 # We need to ensure that runlevels is done last
 SUBDIR+=	runlevels
 
@@ -32,9 +17,7 @@ include ${MK}/sys.mk
 include ${MK}/os.mk
 include ${MK}/subdir.mk
 include ${MK}/dist.mk
-include ${MK}/git.mk
 
 _installafter:
-	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/init.d
-	${INSTALL} -d ${DESTDIR}/${LIBEXECDIR}/tmp
-	${ECHO} "${VERSION}${GITVER}" > ${DESTDIR}/${LIBEXECDIR}/version
+	${INSTALL} -d ${DESTDIR}/${PREFIX}/${RC_LIB}/init.d
+	${INSTALL} -d ${DESTDIR}/${PREFIX}/${RC_LIB}/tmp

Makefile.inc

@@ -1,3 +0,0 @@
-NAME=		openrc
-VERSION=	0.6.8
-PKG=		${NAME}-${VERSION}

README

@@ -11,10 +11,8 @@ PROGLDFLAGS=-static
 LIBNAME=lib64
 DESTDIR=/tmp/openrc-image
 MKPAM=pam
-MKPKGCONFIG=no
 MKTERMCAP=ncurses
 MKTERMCAP=termcap
-MKOLDNET=yes
 PKG_PREFIX=/usr/pkg
 LOCAL_PREFIX=/usr/local
 PREFIX=/usr/local
@@ -41,7 +39,7 @@ If any of the following files exist then we do not overwrite them
 rc and rc.shutdown are the hooks from the BSD init into OpenRC.
 devd.conf is modified from FreeBSD to call /etc/rc.devd which is a generic
 hook into OpenRC.
-inittab is the same, but for SysVInit as used by most Linux distributions.
+inittab is the same, but for SysVInit as used by most Linux distrubtions.
 This can be found in the support folder.
 Obviously, if you're installing this onto a system that does not use OpenRC
 by default then you may wish to backup the above listed files, remove them
@@ -58,15 +56,14 @@ If you installed OpenRC from your chosen distribution, you should report
 bugs directly to them. For example, if you use Gentoo and emerged OpenRC
 then you should reports bugs to http://bugs.gentoo.org.
 
-Otherwise, you can report them directly to me at
-http://roy.marples.name/projects/openrc
+Otherwise, you can report them directly to me at http://bugs.marples.name
 
 
 History - by Roy Marples
 ------------------------
 I became a Gentoo/Linux developer in 2004 and wrote the modular network
 scripts for the Gentoo baselayout package. baselayout is a collection of
-bash scripts to bring up your computer and its services.
+bash scripts to bring up your computer and it's services.
 Then towards the end of 2005 I found myself as the primary maintainer
 for baselayout.
 

README.net

@@ -1,36 +0,0 @@
-OpenRC Network Ideals
----------------------
-
-The new style networking for OpenRC is very simplistic - provide a basic means
-of configuring static interface address and routes whilst allowing the
-possibility to run any command at any point.
-
-In a nutshell, init.d/network is a wrapper around ifconfig(8) and
-init.d/staticroute is wrapper around route(8).
-
-In the Perfect World (TM) ifconfig should be able to configure everything
-about the interface easily * . The BSD family almost get this right and Linux
-epically fails.
-
-* Only static configuration, including link setup.
-For dynamic, static, IPv4LL, arping and per ssid IPv4 setup dhcpcd-5.x
-provides your needs.
-
-It fails because there are many tools to do the same job and often have
-vastly different syntax where they could be similar. In other words, there
-is no coherence.
-
-OpenRC-0.4.x and older (inc Gentoo baselayout-1) had a collection of scripts
-for each tool and allowed a script per interface. Over the years, this design
-has proven very hard to maintain as each user has their own idea of how
-things should work. Also, there were (and still are) race conditions.
-
-So where do we go from here?
-Well, it's possible to use the new network scripts using the tools
-currently available. It's just harder as you have to know them and their
-documentation can be lacking at times.
-The correct end goal is a BSD style ifconfig tool.
-I've started work on it, but the project has stalled somewhat.
-It's display only right now and the source is not yet publicly available.
-If you have the skills and share the vision then contact me privately and
-we'll take it from there.

conf.d/.gitignore

@@ -1,2 +0,0 @@
-network
-staticroute

conf.d/Makefile

@@ -1,19 +1,7 @@
 DIR=	${CONFDIR}
-CONF=	bootmisc fsck hostname local localmount network staticroute urandom
-
-TARGETS+=	network staticroute
-CLEANFILES+=	network staticroute
+CONF=	bootmisc fsck hostname local localmount net urandom
 
 MK=	../mk
 include ${MK}/os.mk
 include Makefile.${OS}
 include ${MK}/scripts.mk
-
-SOS?=	BSD
-
-network: network.in network.${SOS}
-	cp $@.in $@
-	[ -e $@.${SOS} ] && cat $@.${SOS} >> $@ || true
-
-staticroute: staticroute.${SOS}
-	cp $@.${SOS} $@

conf.d/Makefile.Linux

@@ -1,2 +1 @@
 CONF+=	consolefont dmesg hwclock keymaps modules
-SOS=	Linux

conf.d/bootmisc

@@ -1,5 +1,5 @@
 # List of /tmp directories we should clean up
-clean_tmp_dirs="/tmp"
+wipe_tmp_dirs="/tmp"
 
 # Should we wipe the tmp paths completely or just selectively remove known
 # locks / files / etc... ?

conf.d/fsck

@@ -13,11 +13,6 @@
 #fsck_passno=">1"
 #fsck_passno="<2"
 
-# Most modern fs's don't require a full fsck on boot, but for those that do
-# it may be advisable to skip this when running on battery.
-# WARNING: Do not turn this off if you have any JFS partitions.
-fsck_on_battery="YES"
-
 # fsck_shutdown causes fsck to trigger during shutdown as well as startup.
 # The end result of this is that if any periodic non-root filesystem checks are
 # scheduled, under normal circumstances the actual check will happen during

conf.d/hwclock

@@ -1,11 +1,11 @@
-# Set CLOCK to "UTC" if your Hardware Clock is set to UTC (also known as
-# Greenwich Mean Time).  If that clock is set to the local time, then 
+# Set CLOCK to "UTC" if your system clock is set to UTC (also known as
+# Greenwich Mean Time).  If your clock is set to the local time, then 
 # set CLOCK to "local".  Note that if you dual boot with Windows, then 
 # you should set it to "local".
 clock="UTC"
 
 # If you want to set the Hardware Clock to the current System Time 
-# (software clock) during shutdown, then say "YES" here.
+# during shutdown, then say "YES" here.
 # You normally don't need to do this if you run a ntp daemon.
 clock_systohc="NO"
 

conf.d/network.BSD

@@ -1,4 +0,0 @@
-
-# You can assign a default route
-#defaultroute="192.168.0.1"
-#defaultroute6="2001:a:b:c"

conf.d/network.Linux

@@ -1,43 +0,0 @@
-
-# You can assign a default route
-#defaultroute="gw 192.168.0.1"
-#defaultroute6="gw 2001:a:b:c"
-
-# ifconfig under Linux is not that powerful and doesn't easily handle
-# multiple addresses
-# On the other hand, ip (iproute2) is quite powerful and is also supported
-#ip_eth0="192.168.0.10/24; 192.168.10.10/24"
-
-# You can also use ip to add the default route.
-#defaultiproute="via 192.168.0.1"
-#defaultiproute6="via 2001:a:b:c"
-
-# ip doesn't handle MTU like ifconfig, but we can do it like so
-#ifup_eth0="ip link set \$int mtu 1500"
-
-# Create a bonded interface
-#interfaces="bond0"
-#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0"
-#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0"
-#ifdown_bond0="rmmod bonding"
-
-# Create tap interface and a bridge interface.
-# We add the tap to the bridge.
-# An external program, like dhcpcd, will configure the IP on the bridge
-#interfaces="tun0 br0"
-#ifup_tun0="tunctl -t \$int"
-#ifdown_tun0="tunctl -d \$int"
-#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2"
-#ifdown_br0="ifconfig \$int down; btctl delbr \$int"
-
-# Create VLAN
-#interfaces="eth0_2 eth0_3 eth0_4"
-#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4"
-#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0"
-#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0"
-#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0"
-#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4"
-
-# Normally you would use wpa_supplicant to configure wireless, but you can
-# use iwconfig also
-#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar"

conf.d/network.in

@@ -1,28 +0,0 @@
-# Assign static IP addresses and run custom scripts per interface.
-# Seperate commands with ;
-# Prefix with ! to run a shell script.
-# Use \$int to represent the interface
-#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0"
-
-# You also have ifup_eth0 and ifdown_eth0 to run other commands when
-# eth0 is started and stopped.
-# You should note that we don't stop the network at system shutdown by default.
-# If you really need this, then set shutdown_network=YES
-
-# Lastly, the interfaces variable pulls in virtual interfaces that cannot
-# be automatically detected.
-#interfaces="br0 bond0 vlan0"
-
-# You can also use files instead of variables here if you like:
-# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0
-# /etc/ip.eth0 is equivalent to ifconfig_eth0
-# /etc/ifup.eth0 is equivalent to ifup_eth0
-# /etc/ifdown.eth0 is equivalent to ifdown_eth0
-# Any files found will automatically be put into the interfaces variable.
-# You don't need to escape variables in files, so use $int instead of \$int.
-
-# If you require DHCP, you should install dhcpcd and it to the boot or
-# default runlevel.
-
-# NIS users can set the domain name here
-#domainname="foobar"

conf.d/staticroute.BSD

@@ -1,6 +0,0 @@
-# Separate multiple routes using ; or new lines.
-# /etc/route.conf(5) takes precedence over this configuration.
-
-# Example static routes. See route(8) for syntax.
-#staticroute="net 192.168.0.0 -netmask 255.255.255.0 10.73.1.1
-#net 192.168.1.0 -netmask 255.255.255.0 10.73.1.1"

conf.d/staticroute.Linux

@@ -1,8 +0,0 @@
-# Separate multiple routes using ; or new lines.
-
-# Example static routes. See route(8) for syntax.
-#staticroute="net 192.168.0.0 netmask 255.255.255.0 gw 10.73.1.1
-#net 192.168.1.0 netmask 255.255.255.0 gw 10.73.1.1"
-
-# Example static routes using iproute2. See ip(8) for syntax.
-#staticiproute="192.168.0.0/24 via 10.73.1.1; 192.168.1.0/24 via 10.73.1.1"

doc/.gitignore

@@ -1 +0,0 @@
-net.example

doc/net.example.BSD.in

@@ -12,7 +12,7 @@
 # kernel then remove the IPv6 address from your config.
 
 # If you want to use a static address or use DHCP explicitly, jump
-# down to the section labeled INTERFACE HANDLERS.
+# down to the section labelled INTERFACE HANDLERS.
 #
 # If you want to do anything more fancy, you should take the time to
 # read through the rest of this file.
@@ -22,10 +22,10 @@
 #
 # We now support modular networking scripts which means we can easily
 # add support for new interface types and modules while keeping
-# compatibility with existing ones.
+# compatability with existing ones.
 # 
 # Modules load by default if the package they need is installed.  If
-# you specify a module here that doesn't have its package installed
+# you specify a module here that doesn't have it's package installed
 # then you get an error stating which package you need to install.
 # Ideally, you only use the modules setting when you have two or more
 # packages installed that supply the same service.
@@ -43,6 +43,11 @@
 #       (eth0:1, eth0:2, etc)
 #       iproute2 does not do this as there is no need to
 #config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
+# Or you can use sequence expressions
+#config_eth0="192.168.0.{2..4}/24"  FIXME - may not work with baselayout2
+# which does the same as above. Be careful though as if you use this and
+# fallbacks, you have to ensure that both end up with the same number of
+# values otherwise your fallback won't work correctly.
 
 # You can also use IPv6 addresses
 # (you should always specify a prefix length with IPv6 here)
@@ -96,8 +101,8 @@
 #modules="iwconfig"
 
 # ifconfig (iwconig) support is a one shot script - wpa_supplicant is daemon
-# that scans, associates and re-configures if association is lost.
-# We call it iwconfig to separate the wireless setup from ifconfig.
+# that scans, assoicates and re-configures if assocation is lost.
+# We call it iwconfig to seperate the wireless setup from ifconfig.
 ####################################
 # HINTS
 #
@@ -182,7 +187,7 @@
 #dns_servers_001122334455="192.168.0.1 192.168.0.2"
 
 # Map a MAC address to an SSID
-# This is used when the Access Point is not broadcasting its SSID
+# This is used when the Access Point is not broadcasting it's SSID
 # WARNING: This will override the SSID being broadcast due to some
 # Access Points sending an SSID even when they have been configured
 # not to!
@@ -193,7 +198,7 @@
 # This lists the preferred SSIDs to connect to in order
 # SSID's can contain any characters here as they must match the broadcast
 # SSID exactly.
-# Surround each SSID with the " character and separate them with a space
+# Surround each SSID with the " character and seperate them with a space
 # If the first SSID isn't found then it moves onto the next
 # If this isn't defined then it connects to the first one found
 #preferred_aps="SSID1 SSID2"
@@ -208,9 +213,9 @@
 # any other available AP
 # "preferredonly" means it will only connect to visible APs in the preferred
 # list
-# "forcepreferred" means it will forcibly connect to APs in order if it does
+# "forcepreferred" means it will forceably connect to APs in order if it does
 # not find them in a scan
-# "forcepreferredonly" means it forcibly connects to the APs in order and
+# "forcepreferredonly" means it forceably connects to the APs in order and
 # does not bother to scan
 # "forceany" does the same as forcepreferred + connects to any other 
 # available AP
@@ -237,12 +242,12 @@
 
 ##################################################
 # wpa_supplicant
-# emerge net-wireless/wpa_supplicant
+# emerge net-wireless/wpa-supplicant
 # Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Consult the wpa_supplicant.conf.example that is installed in
+# Console the wpa_supplicant.conf.example that is installed in
 # /usr/share/doc/wpa_supplicant
 
-# By default we don't wait for wpa_supplicant to associate and authenticate.
+# By default we don't wait for wpa_suppliant to associate and authenticate.
 # If you would like to, so can specify how long in seconds
 #associate_timeout_eth0=60
 # A value of 0 means wait forever.
@@ -320,7 +325,7 @@
 # Set generic DHCP options like so
 #dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
 
-# This tells the dhcp client to release its lease when it stops, not to
+# This tells the dhcp client to release it's lease when it stops, not to
 # overwrite dns, ntp and nis settings, not to set a default route and not to
 # send the current hostname to the dhcp server and when it starts.
 # You can use any combination of the above options - the default is not to

doc/net.example.Linux.in

@@ -12,7 +12,7 @@
 # kernel then remove the IPv6 address from your config.
 
 # If you want to use a static address or use DHCP explicitly, jump
-# down to the section labeled INTERFACE HANDLERS.
+# down to the section labelled INTERFACE HANDLERS.
 #
 # If you want to do anything more fancy, you should take the time to
 # read through the rest of this file.
@@ -23,10 +23,10 @@
 #
 # We now support modular networking scripts which means we can easily
 # add support for new interface types and modules while keeping
-# compatibility with existing ones.
+# compatability with existing ones.
 # 
 # Modules load by default if the package they need is installed.  If
-# you specify a module here that doesn't have its package installed
+# you specify a module here that doesn't have it's package installed
 # then you get an error stating which package you need to install.
 # Ideally, you only use the modules setting when you have two or more
 # packages installed that supply the same service.
@@ -70,6 +70,11 @@
 #       iproute2 does not do this as there is no need to
 #config_eth0="192.168.0.2/24 192.168.0.3/24 192.168.0.4/24"
 # However, that only works with CIDR addresses, so you can't use netmask.
+# Or you can use sequence expressions
+#config_eth0="192.168.0.{2..4}/24"
+# which does the same as above. Be careful though as if you use this and
+# fallbacks, you have to ensure that both end up with the same number of
+# values otherwise your fallback won't work correctly.
 
 # You can also use IPv6 addresses
 # (you should always specify a prefix length with IPv6 here)
@@ -106,7 +111,7 @@
 
 # Each module described below can set a default base metric, lower is
 # preferred over higher. This is so we can prefer a wired route over a
-# wireless route automatically. You can override this by setting
+# wireless route automaticaly. You can override this by setting
 #metric_eth0="100"
 # or on a global basis
 #metric="100"
@@ -253,7 +258,7 @@
 #key_SSID="s:foobar enc open"
 #key_SSID="1234-5678-9012 enc open"
 
-# You may want to set multiple keys - here's an example
+# You may want to set muliple keys - here's an example
 # It sets 4 keys on the card and instructs to use key 2 by default
 #key_SSID="[1] s:passkey1 key [2] s:passkey2 key [3] s:passkey3 key [4] s:passkey4 key [2]"
 
@@ -283,7 +288,7 @@
 #dns_servers_001122334455="192.168.0.1 192.168.0.2"
 
 # Map a MAC address to an SSID
-# This is used when the Access Point is not broadcasting its SSID
+# This is used when the Access Point is not broadcasting it's SSID
 # WARNING: This will override the SSID being broadcast due to some
 # Access Points sending an SSID even when they have been configured
 # not to!
@@ -294,7 +299,7 @@
 # This lists the preferred SSIDs to connect to in order
 # SSID's can contain any characters here as they must match the broadcast
 # SSID exactly.
-# Surround each SSID with the " character and separate them with a space
+# Surround each SSID with the " character and seperate them with a space
 # If the first SSID isn't found then it moves onto the next
 # If this isn't defined then it connects to the first one found
 #preferred_aps="SSID1 SSID2" 
@@ -307,9 +312,9 @@
 # "any" means it will connect to visible APs in the preferred list and then any
 # other available AP
 # "preferredonly" means it will only connect to visible APs in the preferred list
-# "forcepreferred" means it will forcibly connect to APs in order if it does not find
+# "forcepreferred" means it will forceably connect to APs in order if it does not find
 # them in a scan
-# "forcepreferredonly" means it forcibly connects to the APs in order and does not bother
+# "forcepreferredonly" means it forceably connects to the APs in order and does not bother
 # to scan
 # "forceany" does the same as forcepreferred + connects to any other available AP
 # Default is "any"
@@ -336,16 +341,16 @@
 
 ############################################################
 # wpa_supplicant
-# emerge net-wireless/wpa_supplicant
+# emerge net-wireless/wpa-supplicant
 # Wireless options are held in /etc/wpa_supplicant/wpa_supplicant.conf
-# Consult the wpa_supplicant.conf.example that is installed in
+# Console the wpa_supplicant.conf.example that is installed in
 # /usr/share/doc/wpa_supplicant
 # To configure wpa_supplicant
 #wpa_supplicant_ath0="-Dmadwifi" # For Atheros based cards
 # Consult wpa_supplicant for more drivers - the default is -Dwext which should
 # work for most cards.
 
-# By default we don't wait for wpa_supplicant to associate and authenticate.
+# By default we don't wait for wpa_suppliant to associate and authenticate.
 # If you need to change this behaviour then you don't know how our scripts work
 # and setting this value could cause strange things to happen.
 # If you would like to, so can specify how long in seconds.
@@ -448,7 +453,7 @@
 # Set generic DHCP options like so
 #dhcp_eth0="release nodns nontp nonis nogateway nosendhost"
 
-# This tells the dhcp client to release its lease when it stops, not to
+# This tells the dhcp client to release it's lease when it stops, not to
 # overwrite dns, ntp and nis settings, not to set a default route and not to
 # send the current hostname to the dhcp server and when it starts.
 # You can use any combination of the above options - the default is not to
@@ -572,7 +577,7 @@
 #config_bond0="null" # You may not want to assign an IP the the bond
 
 # You can also configure the bond here, which must be done via sysfs on 2.6
-# kernels or newer. See the kernel bonding documentation for a description of
+# kernels or newer. See the kernel bonding documention for a description of
 # these options.
 #arp_ip_target_bond0="+26.0.0.0"
 
@@ -658,7 +663,7 @@
 #
 # Dead peer detection
 #	lcp-echo-interval 15	# Send a LCP echo every 15 seconds
-#	lcp-echo-failure 3	# Make peer dead after 3 consecutive
+#	lcp-echo-failure 3	# Make peer dead after 3 consective
 #				# echo-requests
 #	
 # Compression options - use these to completely disable compression
@@ -822,8 +827,8 @@
 #config_nas0="'192.168.0.1/24'"
 
 #-----------------------------------------------------------------------------
-# Tunneling
-# WARNING: For tunneling it is highly recommended that you
+# Tunnelling
+# WARNING: For tunnelling it is highly recommended that you
 # emerge sys-apps/iproute2
 #
 # For GRE tunnels
@@ -838,7 +843,7 @@
 
 # 6to4 Tunnels allow IPv6 to work over IPv4 addresses, provided you
 # have a non-private address configured on an interface.
-# link_6to4="eth0"		# Interface to base its addresses on
+# link_6to4="eth0"		# Interface to base it's addresses on
 # config_6to4="ip6to4"
 # You may want to depend on eth0 like so
 #rc_need_6to4="net.eth0"
@@ -848,7 +853,7 @@
 # sit0 - otherwise use a different name like 6to4 in the example above.
 
 # You can also specify a relay and suffix if you like.
-# The default relay is 192.88.99.1 and the default suffix is :1
+# The default relay is 192.88.99.1 and the defualt suffix is :1
 #relay_6to4="192.168.3.2"
 #suffix_6to4=":ff"
 
@@ -896,7 +901,7 @@
 # and you're done :)
 
 # By default we don't wait for netplug/ifplugd to configure the interface.
-# If you would like it to wait so that other services know that network is up
+# If you would like it to wait so that other services now that network is up
 # then you can specify a timeout here.
 #plug_timeout="10"
 # A value of 0 means wait forever.
@@ -936,8 +941,8 @@
 
 #preup() {
 #	# Test for link on the interface prior to bringing it up.  This
-#	# only works on some network adapters and requires the
-#	# sys-apps/net-tools package to be installed.
+#	# only works on some network adapters and requires the mii-diag
+#	# package to be installed.
 #	if mii-tool "${IFACE}" 2> /dev/null | grep -q 'no link'; then
 #		ewarn "No link on ${IFACE}, aborting configuration"
 #		return 1
@@ -987,7 +992,7 @@
 #	#	'from 24.80.102.112/32 to 192.168.1.0/24 table localnet priority 100' \
 #	#	'from 216.113.223.51/32 to 192.168.1.0/24 table localnet priority 100' \
 #	#"
-#	eval set -- \$rules_${IFVAR}
+#	eval set -- $\rules_${IFVAR}
 #	if [ $# != 0 ]; then
 #		einfo "Adding IP policy routing rules"
 #		eindent
@@ -998,7 +1003,7 @@
 #		else
 #			for x; do
 #				ebegin "${x}"
-#				ip rule add ${x}
+#				ip rule add ${x} dev "${IFACE}"
 #				eend $?
 #			done
 #		fi

etc/.gitignore

@@ -1,3 +0,0 @@
-rc.conf
-rc
-rc.shutdown

etc/rc.conf.in

@@ -2,24 +2,17 @@
 
 # Set to "YES" if you want the rc system to try and start services
 # in parallel for a slight speed improvement. When running in parallel we
-# prefix the service output with its name as the output will get
+# prefix the service output with it's name as the output will get
 # jumbled up.
 # WARNING: whilst we have improved parallel, it can still potentially lock
 # the boot process. Don't file bugs about this unless you can supply
 # patches that fix it without breaking other things!
-#rc_parallel="NO"
+rc_parallel="NO"
 
 # Set rc_interactive to "YES" and you'll be able to press the I key during
 # boot so you can choose to start specific services. Set to "NO" to disable
-# this feature. This feature is automatically disabled if rc_parallel is
-# set to YES.
-#rc_interactive="YES"
-
-# If we need to drop to a shell, you can specify it here.
-# If not specified we use $SHELL, otherwise the one specified in /etc/passwd,
-# otherwise /bin/sh
-# Linux users could specify /sbin/sulogin
-#rc_shell=/bin/sh
+# this feature.
+rc_interactive="YES"
 
 # Do we allow any started service in the runlevel to satisfy the depedency
 # or do we want all of them regardless of state? For example, if net.eth0
@@ -27,7 +20,7 @@
 # both will be started, but services that depend on 'net' will work if either
 # one comes up. With rc_depend_strict="YES" we would require them both to
 # come up.
-#rc_depend_strict="YES"
+rc_depend_strict="YES"
 
 # rc_hotplug is a list of services that we allow to be hotplugged.
 # By default we do not allow hotplugging.
@@ -45,11 +38,11 @@
 # /var/log/rc.log
 # NOTE: Linux systems require the devfs service to be started before
 # logging can take place and as such cannot log the sysinit runlevel.
-#rc_logger="YES"
+rc_logger="NO"
 
 # By default we filter the environment for our running scripts. To allow other
 # variables through, add them here. Use a * to allow all variables through.
-#rc_env_allow="VAR1 VAR2"
+# rc_env_allow="VAR1 VAR2"
 
 # By default we assume that all daemons will start correctly.
 # However, some do not - a classic example is that they fork and return 0 AND
@@ -57,33 +50,17 @@
 # child crashes. You can set the number of milliseconds start-stop-daemon
 # waits to check that the daemon is still running after starting here.
 # The default is 0 - no checking.
-#rc_start_wait=100
-
-# rc_nostop is a list of services which will not stop when changing runlevels.
-# This still allows the service itself to be stopped when called directly.
-#rc_nostop=""
-
-# rc will attempt to start crashed services by default.
-# However, it will not stop them by default as that could bring down other
-# critical services.
-#rc_crashed_stop=NO
-#rc_crashed_start=YES
+# rc_start_wait=100
 
 ##############################################################################
 # MISC CONFIGURATION VARIABLES
 # There variables are shared between many init scripts
 
 # Set unicode to YES to turn on unicode support for keyboards and screens.
-#unicode="NO"
+unicode="NO"
 
-# Below is the default list of network fstypes.
-#
-# afs cifs coda davfs fuse fuse.sshfs gfs glusterfs lustre ncpfs
-# nfs nfs4 ocfs2 shfs smbfs
-#
-# If you would like to add to this list, you can do so by adding your
-# own fstypes to the following variable.
-#extra_net_fs_list=""
+# Network fstypes. Below is the default.
+net_fs_list="afs cifs coda davfs fuse gfs ncpfs nfs nfs4 ocfs2 shfs smbfs"
 
 ##############################################################################
 # SERVICE CONFIGURATION VARIABLES

etc/rc.devd

@@ -1,5 +1,5 @@
 #!/bin/sh
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 # Inform RC that we are in the background and hotplugged

etc/rc.in

@@ -1,5 +1,5 @@
 #!@SHELL@
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 # If $TERM is not set then assume default of @TERM@

etc/rc.shutdown.in

@@ -1,5 +1,5 @@
 #!@SHELL@
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 # Handle interrupts 

init.d.misc/.gitignore

@@ -1,11 +0,0 @@
-avahi-dnsconfd
-avahid
-dhcpcd
-dbus
-hald
-named
-ntpd
-openvpn
-polkitd
-sshd
-wpa_supplicant

init.d.misc/Makefile

@@ -1,7 +1,6 @@
 DIR=	${INITDIR}
-SRCS=	avahi-dnsconfd.in avahid.in dhcpcd.in dbus.in \
-	hald.in named.in ntpd.in \
-	openvpn.in polkitd.in sshd.in wpa_supplicant.in
+SRCS=	avahi-dnsconfd.in avahid.in dbus.in hald.in named.in ntpd.in \
+	openvpn.in polkitd.in sshd.in
 
 MK=	../mk
 

init.d.misc/Makefile.FreeBSD

@@ -1 +1 @@
-PKG_PREFIX?=	/usr/local
+PREFIX?=	/usr/local

init.d.misc/Makefile.Linux

@@ -1 +1 @@
-PKG_PREFIX?=/usr
+PREFIX=/usr

init.d.misc/Makefile.NetBSD

@@ -1 +1 @@
-PKG_PREFIX?=	/usr/pkg
+PREFIX?=	/usr/pkg

init.d.misc/avahi-dnsconfd.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/avahi-dnsconfd
-command_args="$avahi_dnsconfd_args -D"
+command_args="${avahi_dnsconfd_args} -D"
 pidfile=@VARBASE@/run/avahi-dnsconfd.pid
 name="Avahi DNS Configuration Daemon"
 

init.d.misc/avahid.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/avahi-daemon
-command_args="$avahid_args -D"
+command_args="${avahid_args} -D"
 pidfile=@VARBASE@/run/avahi-daemon/pid
 name="Avahi Service Advertisement Daemon"
 

init.d.misc/dbus.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/bin/dbus-daemon

init.d.misc/dhcpcd.in

@@ -1,27 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-command=/sbin/dhcpcd
-pidfile=/var/run/dhcpcd.pid
-command_args=-q
-name="DHCP Client Daemon"
-
-depend()
-{
-	provide net
-	need localmount
-	use logger
-	after bootmisc modules
-	before dns
-}
-
-stop_pre()
-{
-	# When shutting down, kill dhcpcd but preserve network
-	# We do this as /var/run/dhcpcd could be cleaned out when we
-	# return to multiuser.
-	if yesno $RC_GOINGDOWN; then
-		: ${stopsig:=SIGKILL}
-	fi
-}

init.d.misc/dnsmasq.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/dnsmasq
-command_args=$dnsmasq_args
+command_args=${dnsmasq_args}
 pidfile=@VARBASE@/run/dnsmasq.pid
 required_files=/etc/dnsmasq.conf
 
@@ -18,7 +18,7 @@ depend()
 
 reload()
 {
-	ebegin "Reloading $RC_SVCNAME"
-	start-stop-daemon --signal SIGHUP --pidfile "$pidfile"
+	ebegin "Reloading ${RC_SVCNAME}"
+	start-stop-daemon --signal SIGHUP --pidfile "${pidfile}"
 	eend $?
 }

init.d.misc/hald.in

@@ -1,10 +1,10 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/hald
 pidfile=@VARBASE@/run/hald/hald.pid
-command_args=$hald_args
+command_args="${hald_args}"
 name="Hardware Abstraction Layer Daemon"
 
 depend()

init.d.misc/named.in

@@ -1,16 +1,16 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/named
-command_args=$named_args
+command_args=${named_args}
 pidfile=@VARBASE@/run/named.pid
 name="Domain Name server"
 extra_started_commands="reload"
 
 namedb=/etc/namedb
 uid=named
-case "$RC_UNAME" in
+case "${RC_UNAME}" in
 	FreeBSD)
 		uid=bind
 		pidfile=@VARBASE@/run/named/pid
@@ -19,7 +19,7 @@ case "$RC_UNAME" in
 		uid=bind
 		;;
 esac
-: ${named_uid:=${uid}}
+named_uid=${named_uid:-${uid}}
 
 depend()
 {
@@ -30,71 +30,68 @@ depend()
 
 start_pre()
 {
-	if [ -n "$named_chroot" ]; then
+	if [ -n "${named_chroot}" ]; then
 		# Create (or update) the chroot directory structure
 		if [ -r /etc/mtree/BIND.chroot.dist ]; then
-			mtree -deU -f /etc/mtree/BIND.chroot.dist -p "$named_chroot"
+			mtree -deU -f /etc/mtree/BIND.chroot.dist -p "${named_chroot}"
 		else
 			ewarn "/etc/mtree/BIND.chroot.dist missing,"
 			ewarn "chroot directory structure not updated"
 		fi
 
-		if [ ! -d "$named_chroot"/. ]; then
-			eerror "chroot directory $named_chroot missing"
+		if [ ! -d "${named_chroot}"/. ]; then
+			eerror "chroot directory ${named_chroot} missing"
 			exit 1
 		fi
 
 		# Create /etc/namedb symlink
-		if [ ! -L "$namedb" ]; then
-			if [ -d "$namedb" ]; then
-				ewarn "named chroot: $namedb is a directory!"
-			elif [ -e "$namedb" ]; then
-				ewarn "named chroot: $namedb exists!"
+		if [ ! -L "${namedb}" ]; then
+			if [ -d "${namedb}" ]; then
+				ewarn "named chroot: ${namedb} is a directory!"
+			elif [ -e "${namedb}" ]; then
+				ewarn "named chroot: ${namedb} exists!"
 			else
-				ln -s "$named_chroot$namedb" "$namedb"
+				ln -s "${named_chroot}${namedb}" "${namedb}"
 			fi
 		else
 			# Make sure it points to the right place.
-			ln -shf "$named_chroot$namedb" "$namedb"
+			ln -shf "${named_chroot}${namedb}" "${namedb}"
 		fi
 
-		case "$RC_UNAME" in
+		case "${RC_UNAME}" in
 			*BSD|DragonFly)
 				# Mount a devfs in the chroot directory if needed
-				umount "$named_chroot"/dev 2>/dev/null
-				mount -t devfs dev "$named_chroot"/dev
-				devfs -m "$named_chroot"/dev \
-					ruleset devfsrules_hide_all
-				devfs -m "$named_chroot"/dev \
-					rule apply path null unhide
-				devfs -m "$named_chroot"/dev \
-					rule apply path random unhide
+				umount "${named_chroot}"/dev 2>/dev/null
+				mount -t devfs dev "${named_chroot}"/dev
+				devfs -m "${named_chroot}"/dev ruleset devfsrules_hide_all
+				devfs -m "${named_chroot}"/dev rule apply path null unhide
+				devfs -m "${named_chroot}"/dev rule apply path random unhide
 				;;
 		esac
 
 		# Copy local timezone information if it is not up to date.
 		if [ -r /etc/localtime ]; then
-			cmp -s /etc/localtime "$named_chroot/etc/localtime" ||
-			cp -p /etc/localtime "$named_chroot/etc/localtime"
+			cmp -s /etc/localtime "${named_chroot}/etc/localtime" ||
+			cp -p /etc/localtime "${named_chroot}/etc/localtime"
 		fi
 
-		command_args="$command_args -t $named_chroot"
+		command_args="${command_args} -t ${named_chroot}"
 
-		ln -fs "$named_chroot$pidfile" "$pidfile"
+		ln -fs "${named_chroot}${pidfile}" "${pidfile}"
 	fi
 
-	if [ ! -s "$named_chroot$namedb/rndc.conf" ]; then
-		local confgen="${command%/named}/rndc-confgen -a -b256 -u $named_uid \
-			-c $named_chrootdir/etc/namedb/rndc.key"
-		if [ -s "$named_chroot$namedb/rndc.key" ]; then
+	if [ ! -s "${named_chroot}${namedb}/rndc.conf" ]; then
+		local confgen="${command%/named}/rndc-confgen -a -b256 -u ${named_uid} \
+			-c ${named_chrootdir}/etc/namedb/rndc.key"
+		if [ -s "${named_chroot}${namedb}/rndc.key" ]; then
 			local getuser="stat -f%Su"
-			[ "$RC_UNAME" = Linux ] && getuser="stat -c%U"
-			case $(${getuser} "$named_chroot$namedb"/rndc.key) in
-				root|"$named_uid");;
-				*) $confgen;;
+			[ "${RC_UNAME}" = "Linux" ] && getuser="stat -c%U"
+			case $(${getuser} "${named_chroot}${namedb}"/rndc.key) in
+				root|"${named_uid}");;
+				*) ${confgen};;
 			esac
 		else
-			$confgen
+			${confgen}
 		fi
 	fi
 }
@@ -106,7 +103,7 @@ reload()
 
 stop_post()
 {
-	if [ -n "$named_chroot" -a -c "$named_chroot"/dev/null ]; then
-		umount "$named_chroot"/dev 2>/dev/null || true
+	if [ -n "${named_chroot}" -a -c "${named_chroot}"/dev/null ]; then
+		umount "${named_chroot}"/dev 2>/dev/null || true
 	fi
 }

init.d.misc/ntpd.in

@@ -1,14 +1,13 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
-: ${ntpd_config:=/etc/ntp.conf}
-: ${ntpd_drift:=/var/db/ntpd.drift}
+ntpd_config=${ntpd_config:-/etc/ntp.conf}
+ntpd_drift=${ntpd_drift:-/var/db/ntpd.drift}
 
 command=/usr/sbin/ntpd
-required_files=$ntpd_config
 pidfile=/var/run/ntpd.pid
-command_args="$ntpd_args -c $ntpd_config -f $ntpd_drift -p $pidfile"
+command_args="${ntpd_args} -c ${ntpd_config} -f ${ntpd_drift} -p ${pidfile}"
 name="Network Time Protocol Daemon"
 
 depend()
@@ -20,18 +19,22 @@ depend()
 
 start_pre()
 {
-	if [ -n "$ntpd_chroot" ]; then
-		case "$RC_UNAME" in
+	if [ ! -r "${ntpd_config}" ]; then
+		eerror "${ntpd_config} is not readable"
+		return 1
+	fi
+
+	if [ -n "${ntpd_chroot}" ]; then
+		case "${RC_UNAME}" in
 			*BSD|DragonFly)
-				if [ ! -c "$ntpd_chroot/dev/clockctl" ]; then
-					rm -f "$ntpd_chroot/dev/clockctl"
-					(cd /dev; /bin/pax -rw -pe clockctl \
-					 "$ntpd_chroot/dev")
+				if [ ! -c "${ntpd_chroot}/dev/clockctl" ]; then
+					rm -f "${ntpd_chroot}/dev/clockctl"
+					(cd /dev; /bin/pax -rw -pe clockctl "${ntpd_chroot}/dev")
 				fi
 				;;
 		esac
-		ln -fs "$ntpd_chroot$ntpd_drift" "$ntpd_drift"
+		ln -fs "${ntpd_chroot}${ntpd_drift}" "${ntpd_drift}"
 
-		command_args="$command_args -u ntpd:ntpd -i $ntpd_chroot"
+		command_args="${command_args} -u ntpd:ntpd -i ${ntpd_chroot}"
 	fi
 }

init.d.misc/openvpn.in

@@ -1,32 +1,31 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 vpn=${RC_SVCNAME#*.}
 name="OpenVPN"
-[ "$vpn" != openvpn ] && name="$name ($vpn)"
+[ "${vpn}" != "openvpn" ] && name="${name} (${vpn})"
 command=@PKG_PREFIX@/sbin/openvpn
 
-pidfile=@VARBASE@/run/"$RC_SVCNAME".pid
-: ${openvpn_dir:=@PKG_PREFIX@/etc/openvpn}
-: ${openvpn_config:=$openvpn_dir/$vpn.conf}
-command_args="$openvpn_args --daemon --config $openvpn_config"
-command_args="$command_args --writepid $pidfile"
-required_dirs=$openvpn_dir
-required_files=$openvpn_config
+pidfile=@VARBASE@/run/"${RC_SVCNAME}".pid
+openvpn_dir=${openvpn_dir:-@PKG_PREFIX@/etc/openvpn}
+openvpn_config=${openvpn_config:-${openvpn_dir}/${vpn}.conf}
+command_args="${openvpn_args} --daemon --config ${openvpn_config} --writepid ${pidfile}"
+required_dirs="${openvpn_dir}"
+required_files="${openvpn_config}"
 
 # If we're an openvpn client, then supply a nice default config
 # You can find sample up/down scripts in the OpenRC support/openvpn dir
-if yesno $openvpn_client; then
-	: ${openvpn_up:=${openvpn_dir}/up.sh}
-	: ${openvpn_down:=${openvpn_dir}/down.sh}
-	command_args="$command_args --nobind --up-delay --up-restart --down-pre"
-	command_args="$command_args --up $openvpn_up"
-	command_args="$command_args --down $openvpn_down"
-	required_files="$required_files $openvpn_up $openvpn_down"
+if yesno "${openvpn_client}"; then
+	openvpn_up=${openvpn_up:-${openvpn_dir}/up.sh}
+	openvpn_down=${openvpn_down:-${openvpn_dir}/down.sh}
+	command_args="${command_args} --nobind --up-delay --up-restart --down-pre"
+	command_args="${command_args} --up ${openvpn_up}"
+	command_args="${command_args} --down ${openvpn_down}"
+	required_files="${required_files} ${openvpn_up} ${openvpn_down}"
 	
 	in_background_fake="start stop"
-	start_inactive=YES
+	start_inactive="YES"
 fi
 
 depend()
@@ -39,7 +38,7 @@ depend()
 start_pre()
 {
 	# Linux has good dynamic tun/tap creation
-	if [ "$RC_UNAME" = Linux ]; then
+	if [ "${RC_UNAME}" = "Linux" ]; then
 		if [ ! -e /dev/net/tun ]; then
 			if ! modprobe tun; then
 				eerror "TUN/TAP support is not available in this kernel"
@@ -61,7 +60,8 @@ start_pre()
 	fi
 	
 	# If the config file does not specify the cd option, we do
-	if ! grep -q "^[ \t]*cd[ \t].*" "$openvpn_config"; then
-		command_args="$command_args --cd $openvpn_dir"
+	# But if we specify it, we override the config option which we do not want
+	if ! grep -q "^[ \t]*cd[ \t].*" "${openvpn_config}"; then
+		command_args="${command_args} --cd ${openvpn_dir}"
 	fi
 }

init.d.misc/polkitd.in

@@ -1,10 +1,10 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=@PKG_PREFIX@/sbin/polkitd
 pidfile=@VARBASE@/run/polkitd/polkitd.pid
-command_args="$polkitd_args"
+command_args="${polkitd_args}"
 name="PolicyKit Daemon"
 
 depend()

init.d.misc/sshd.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/sshd
-command_args=$sshd_args
+command_args=${sshd_args}
 pidfile=@VARBASE@/run/sshd.pid
 required_files=/etc/ssh/sshd_config
 
@@ -31,5 +31,5 @@ start_pre()
 		eend $? || return 1
 	fi
 
-	$command -t	
+	${command} -t	
 }

init.d.misc/wpa_supplicant.in

@@ -1,70 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-command=/usr/sbin/wpa_supplicant
-: ${wpa_supplicant_conf:=/etc/wpa_supplicant.conf}
-wpa_supplicant_if=${wpa_supplicant_if:+-i}$wpa_supplicant_if
-command_args="$wpa_supplicant_args -B -c$wpa_supplicant_conf $wpa_supplicant_if"
-name="WPA Supplicant Daemon"
-
-depend()
-{
-	need localmount
-	use logger
-	after bootmisc modules
-	before dns dhcpcd net
-	keyword -shutdown
-}
-
-find_wireless()
-{
-	local iface=
-
-	case "$RC_UNAME" in
-	Linux)
-		for iface in /sys/class/net/*; do
-			if [ -e "$iface"/wireless -o \
-				-e "$iface"/phy80211 ]
-			then
-				echo "${iface##*/}"
-				return 0
-			fi
-		done
-		;;
-	*)
-		for iface in /dev/net/* $(ifconfig -l 2>/dev/null); do
-			if ifconfig "${iface##*/}" 2>/dev/null | \
-				grep -q "[ ]*ssid "
-			then
-				echo "${iface##*/}"
-				return 0
-			fi
-		done
-		;;
-	esac
-	
-	return 1
-}
-
-append_wireless()
-{
-	local iface= i=
-
-	iface=$(find_wireless)
-	if [ -n "$iface" ]; then
-		for i in $iface; do
-			command_args="$command_args -i$i"
-		done
-	else
-		eerror "Could not find a wireless interface"
-	fi
-}
-
-start_pre()
-{
-	case " $command_args" in
-	*" -i"*) ;;
-	*) append_wireless;;
-	esac
-}

init.d/.gitignore

@@ -1,42 +0,0 @@
-bootmisc
-fsck
-hostname
-local
-localmount
-moused
-net.lo
-net.lo0
-netmount
-network
-root
-savecache
-swap
-sysctl
-urandom
-devfs
-dmesg
-hwclock
-consolefont
-keymaps
-killprocs
-modules
-mount-ro
-mtab
-numlock
-procfs
-staticroute
-sysfs
-devdb
-hostid
-newsyslog
-pf
-rarpd
-rc-enabled
-rpcbind
-savecore
-swap-blk
-swclock
-syslogd
-termencoding
-ttys
-wscons

init.d/Makefile

@@ -1,27 +1,16 @@
 DIR=	${INITDIR}
-SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in netmount.in \
-	network.in root.in savecache.in staticroute.in swap.in swclock.in \
-	sysctl.in urandom.in
+SRCS=	bootmisc.in fsck.in hostname.in local.in localmount.in \
+	netmount.in root.in savecache.in swap.in sysctl.in urandom.in
 BIN=	${OBJS}
 
-# Build our old net foo or not
-_OLDNET_SH=	case "${MKOLDNET}" in \
-		[Yy][Ee][Ss]) echo "net.lo";; \
-		*) echo "";; \
-		esac
-_OLDNET!=	${_OLDNET_SH}
-_NET_LO=	${_OLDNET}$(shell ${_OLDNET_SH})
-
-INSTALLAFTER=	_installafter_${_NET_LO}
-CLEANFILES+=	${_NET_LO}
-TARGETS+=	${_NET_LO}
+INSTALLAFTER=	_installafter
+CLEANFILES+=	net.lo
+TARGETS+=	net.lo
 
 MK=	../mk
 include ${MK}/os.mk
 include Makefile.${OS}
 include ${MK}/scripts.mk
 
-_installafter_: realinstall
-
-_installafter_net.lo: realinstall
+_installafter: realinstall
 	${INSTALL} -m ${BINMODE} net.lo ${DESTDIR}/${INITDIR}/${NET_LO}

init.d/adjkerntz.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 extra_commands="save"
@@ -7,8 +7,8 @@ extra_commands="save"
 description="Sets the local clock to UTC or Local Time." 
 description_save="Saves the current time in the BIOS."
 
-: ${clock:=${CLOCK:-UTC}}
-if [ "$clock" = "UTC" ]; then
+clock=${clock:-${CLOCK:-UTC}}
+if [ "${clock}" = "UTC" ]; then
 	utc="UTC"
 else
 	utc="Local Time"
@@ -18,17 +18,17 @@ depend()
 {
 	provide clock
 	# BSD adjkerntz needs to be able to write to /etc
-	if [ "$clock" = "UTC" -a -e /etc/wall_cmos_clock ] ||
-	   [ "$clock" != "UTC" -a ! -e /etc/wall_cmos_clock ]; then
+	if [ "${clock}" = "UTC" -a -e /etc/wall_cmos_clock ] ||
+	   [ "${clock}" != "UTC" -a ! -e /etc/wall_cmos_clock ]; then
 		need root
 	fi
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start()
 {	
 	ebegin "Starting the System Clock Adjuster [${utc}]"
-	if [ "$clock" != "UTC" ]; then
+	if [ "${clock}" != "UTC" ]; then
 		echo >/etc/wall_cmos_clock
 		start-stop-daemon --start --exec /sbin/adjkerntz -- -i
 	else
@@ -48,8 +48,8 @@ save()
 stop()
 {
 	# Don't tweak the hardware clock on LiveCD halt.
-	if yesno "${clock_systohc:-$CLOCK_SYSTOHC}"; then
-	   [ -z "$CDBOOT" ] && save
+	if yesno "${clock_systohc:-${CLOCK_SYSTOHC}}"; then
+	   [ -z "${CDBOOT}" ] && save
 	fi
 
 	ebegin "Stopping the System Clock Adjuster"

init.d/bootmisc.in

@@ -1,13 +1,14 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {
+	use hostname
 	need localmount
 	before logger
 	after clock sysctl
-	keyword -prefix
+	keyword noprefix
 }
 
 dir_writeable()
@@ -15,33 +16,25 @@ dir_writeable()
 	mkdir "$1"/.test.$$ 2>/dev/null && rmdir "$1"/.test.$$
 }
 
-: ${wipe_tmp:=${WIPE_TMP:-yes}}
-
 cleanup_tmp_dir()
 {
 	local dir="$1"
 
-	if ! [ -d "$dir" ]; then
-		mkdir -p "$dir" || return $?
+	if ! [ -d "${dir}" ]; then
+		mkdir -p "${dir}" || return $?
 	fi
-	dir_writeable "$dir" || return 1
-	chmod a+rwt "$dir"
-	cd "$dir"
-	if yesno $wipe_tmp; then
-		ebegin "Wiping $dir directory"
+	dir_writeable "${dir}" || return 1
+	chmod +t "${dir}"
+	cd "${dir}"
+	if yesno ${wipe_tmp:-${WIPE_TMP:-yes}}; then
+		ebegin "Wiping ${dir} directory"
 		local startopts="-x . -depth"
-		[ "$RC_UNAME" = Linux ] && startopts=". -xdev -depth"
+		[ "${RC_UNAME}" = "Linux" ] && startopts=". -xdev -depth"
 
 		# Faster than find
-		rm -rf -- [^ajlq\.]*
+		rm -rf -- [b-ikm-pr-zA-Z0-9\.]*
 
-		# pam_mktemp creates a .private directory within which
-		# each user gets a private directory with immutable
-		# bit set; remove the immutable bit before trying to
-		# remove it.
-		[ -d /tmp/.private ] && chattr -R -a /tmp/.private 2> /dev/null
-
-		find $startopts ! -name . \
+		find ${startopts} ! -name . \
 			! -path "./lost+found" \
 			! -path "./lost+found/*" \
 			! -path "./quota.user" \
@@ -54,38 +47,28 @@ cleanup_tmp_dir()
 			! -path "./aquota.group/*" \
 			! -path "./journal" \
 			! -path "./journal/*" \
+			! -path "./.private" \
+			! -path "./.private/*" \
 			-exec rm -rf {} \;
 		eend 0
 	else
-		ebegin "Cleaning $dir directory"
-		rm -rf -- "$dir"/.X*-lock "$dir"/esrv* "$dir"/kio* \
-			"$dir"/jpsock.* "$dir"/.fam* "$dir"/.esd* \
-			"$dir"/orbit-* "$dir"/ssh-* "$dir"/ksocket-* \
-			"$dir"/.*-unix
+		ebegin "Cleaning ${dir} directory"
+		rm -rf -- "${dir}"/.X*-lock "${dir}"/esrv* "${dir}"/kio* \
+			"${dir}"/jpsock.* "${dir}"/.fam* "${dir}"/.esd* \
+			"${dir}"/orbit-* "${dir}"/ssh-* "${dir}"/ksocket-* \
+			"${dir}"/.*-unix
 		eend 0
 	fi
 }
 
-mkutmp()
-{
-	: >"$1"
-	# Not all systems have the utmp group
-	chgrp utmp "$1" 2>/dev/null
-	chmod 0664 "$1"
-}
-
 start()
 {
-	# Remove any added console dirs
-	rm -rf "$RC_LIBEXECDIR"/console
-
-	local logw=false runw=false extra=
+	local logw=false
 	# Ensure that our basic dirs exist
-	[ "$RC_UNAME" = Linux ] && extra=/var/lib/misc # Satisfy Linux FHS
-	for x in /var/log /var/run /tmp $extra; do
-		if ! [ -d $x ]; then
-			if ! mkdir -p $x; then
-				eend 1 "failed to create needed directory $x"
+	for x in /var/log /var/run /tmp; do
+		if ! [ -d "${x}" ]; then
+			if ! mkdir -p "${x}"; then
+				eend 1 "failed to create needed directory ${x}"
 				return 1
 			fi
 		fi 
@@ -93,12 +76,15 @@ start()
 
 	if dir_writeable /var/run; then
 		ebegin "Creating user login records"
-		local xtra=
-		[ "$RC_UNAME" = NetBSD ] && xtra=x
-		for x in "" $xtra; do
-			mkutmp /var/run/utmp$x
-		done
-		[ -e /var/log/wtmp ] || mkutmp /var/log/wtmp
+		cp /dev/null /var/run/utmp
+		chgrp utmp /var/run/utmp
+		chmod 0664 /var/run/utmp
+		if dir_writeable /var/log; then
+			logw=true
+			[ -e /var/log/wtmp ] || cp /dev/null /var/log/wtmp
+			chgrp utmp /var/log/wtmp
+			chmod 0664 /var/log/wtmp
+		fi
 		eend 0
 
 		ebegin "Cleaning /var/run"
@@ -107,30 +93,30 @@ start()
 			! -name ld-elf.so.hints ! -name ld.so.hints);
 		do
 			# Clean stale sockets
-			if [ -S "$x" ]; then
+			if [ -S "${x}" ]; then
 				if type fuser >/dev/null 2>&1; then
-					fuser "$x" >/dev/null 2>&1 || rm -- "$x"
+					fuser "${x}" 2>/dev/null || rm "${x}"
 				else
-					rm -- "$x"
+					rm "${x}"
 				fi
 			fi
-			[ ! -f "$x" ] && continue
+			[ ! -f "${x}" ] && continue
 			# Do not remove pidfiles of already running daemons
-			case "$x" in
+			case "${x}" in
 				*.pid)
 					start-stop-daemon --test --quiet \
-					--stop --pidfile "$x" && continue
+					--stop --pidfile "${x}" && continue
 				;;
 			esac
-			rm -f -- "$x"
+			rm -f -- "${x}"
 		done
 		eend 0
 	fi
 
 	# Clean up /tmp directories
 	local tmp=
-	for tmp in ${clean_tmp_dirs:-${wipe_tmp_dirs-/tmp}}; do
-		cleanup_tmp_dir "$tmp"
+	for tmp in ${wipe_tmp_dirs-/tmp}; do
+		cleanup_tmp_dir "${tmp}"
 	done
 
 	if dir_writeable /tmp; then
@@ -140,32 +126,27 @@ start()
 		rm -rf /tmp/.ICE-unix /tmp/.X11-unix 
 		mkdir -p /tmp/.ICE-unix /tmp/.X11-unix
 		chmod 1777 /tmp/.ICE-unix /tmp/.X11-unix
-		if [ -x /sbin/restorecon ]; then
-			restorecon /tmp/.ICE-unix /tmp/.X11-unix
-		fi
+		[ -x /sbin/restorecon ] && restorecon /tmp/.ICE-unix /tmp/.X11-unix
 	fi
 
-	if $logw || dir_writeable /var/log; then
+	if ${logw} || dir_writeable /var/log; then
 		# Create an 'after-boot' dmesg log
-		if [ "$RC_SYS" != VSERVER -a "$RC_SYS" != OPENVZ ]; then
+		if [ "${RC_SYS}" != "VSERVER" -a "${RC_SYS}" != "OPENVZ" ]; then
 			dmesg > /var/log/dmesg
 			chmod 640 /var/log/dmesg
 		fi
 	fi
 
-	[ -w /etc/nologin ] && rm -f /etc/nologin
+	rm -f /etc/nologin
 	return 0
 }
 
 stop()
 {
 	# Write a halt record if we're shutting down
-	if [ "$RC_RUNLEVEL" = shutdown ]; then
-		[ "$RC_UNAME" = Linux ] && halt -w
-		if [ "$RC_SYS" = OPENVZ ]; then
-			yesno $RC_REBOOT && printf "" >/reboot
-		fi
-	fi
+	case "${RC_RUNLEVEL}" in
+		reboot|shutdown) [ "${RC_UNAME}" = "Linux" ] && halt -w;;
+	esac
 
 	return 0
 }

init.d/consolefont.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Sets a font for the consoles."
@@ -7,24 +7,27 @@ description="Sets a font for the consoles."
 depend()
 {
 	need localmount termencoding
-	after hotplug bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	after hotplug
+	keyword noopenvz noprefix nouml novserver noxenu
 }
 
 start()
 {
+	# Forget about any font until we are successful
+	rm -rf "${RC_LIBDIR}"/console
+
 	ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
 	consolefont=${consolefont:-${CONSOLEFONT}}
 	unicodemap=${unicodemap:-${UNICODEMAP}}
 	consoletranslation=${consoletranslation:-${CONSOLETRANSLATION}}
 
-	if [ -z "$consolefont" ]; then
+	if [ -z "${consolefont}" ]; then
 		ebegin "Using the default console font"
 		eend 0
 		return 0
 	fi
 
-	if [ "$ttyn" = 0 ]; then
+	if [ "${ttyn}" = 0 ]; then
 		ebegin "Skipping font setup (rc_tty_number == 0)"
 		eend 0
 		return 0
@@ -33,41 +36,39 @@ start()
 	local x= param= sf_param= retval=0 ttydev=/dev/tty
 
 	# Get additional parameters
-	if [ -n "$consoletranslation" ]; then
-		param="$param -m $consoletranslation"
+	if [ -n "${consoletranslation}" ]; then
+		param="${param} -m ${consoletranslation}"
 	fi
 	if [ -n "${unicodemap}" ]; then
-		param="$param -u $unicodemap"
+		param="${param} -u ${unicodemap}"
 	fi
 
 	# Set the console font
-	ebegin "Setting console font [$consolefont]"
+	ebegin "Setting console font [${consolefont}]"
 	[ -d /dev/vc ] && ttydev=/dev/vc/
 	x=1
-	while [ $x -le $ttyn ]; do
-		if ! setfont $consolefont $param -C $ttydev$x >/dev/null; then
-			retval=1
-			break
-		fi
-		x=$(($x + 1))
+	while [ ${x} -le ${ttyn} ]; do
+		setfont ${consolefont} ${param} -C ${ttydev}${x} >/dev/null 
+		retval=$((${retval} + $?))
+		x=$((${x} + 1))
 	done
-	eend $retval
+	eend ${retval}
 
 	# Store the last font so we can use it ASAP on boot
-	if [ $retval -eq 0 -a -w "$RC_LIBEXECDIR" ]; then
-		mkdir -p "$RC_LIBEXECDIR"/console
-		for font in /usr/share/consolefonts/"$consolefont".*; do
+	if [ ${retval} -eq 0 -a -w "${RC_LIBDIR}" ]; then
+		mkdir -p "${RC_LIBDIR}"/console
+		for font in /usr/share/consolefonts/"${consolefont}".*; do
 			:
 		done
-		cp "$font" "$RC_LIBEXECDIR"/console
-		echo "${font##*/}" >"$RC_LIBEXECDIR"/console/font
+		cp "${font}" "${RC_LIBDIR}"/console
+		echo "${font##*/}" > "${RC_LIBDIR}"/console/font
 		if yesno ${unicode:-${UNICODE}}; then
-			echo "" > "$RC_LIBEXECDIR"/console/unicode
+			echo "" > "${RC_LIBDIR}"/console/unicode
 		else
-			rm -f "$RC_LIBEXECDIR"/console/unicode
+			rm -f "${RC_LIBDIR}"/console/unicode
 		fi
 
 	fi
 
-	return $retval
+	return ${retval}
 }

init.d/devd.in

@@ -1,16 +1,16 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/sbin/devd
-command_args=$devd_args
+command_args=${devd_args}
 name="Device State Change Daemon"
 
 depend() {
 	need localmount
 	after bootmisc
 	before net.lo0
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start_pre() {

init.d/devdb.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2008 Roy Marples <roy@marples.name>
+# Copyright 2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Creates the dev database"

init.d/devfs.in

@@ -1,12 +1,12 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Mount system critical filesystems in /dev."
 
 depend() {
 	use dev
-	keyword -prefix -vserver
+	keyword noprefix
 }
 
 start() {
@@ -15,19 +15,19 @@ start() {
 		"devpts /dev/pts 0755 ,gid=5,mode=0620 devpts" \
 		"tmpfs /dev/shm 1777 ,nodev shm" \
 	; do
-		set -- $x
+		set -- ${x}
 		grep -Eq "[[:space:]]+$1$" /proc/filesystems || continue
-		mountinfo -q $2 && continue
+		mountinfo -q "$2" && continue
 
-		if [ ! -d $2 ]; then
-			mkdir -m $3 -p $2 >/dev/null 2>&1 || \
+		if [ ! -d "$2" ]; then
+			mkdir -m "$3" -p "$2" >/dev/null 2>&1 || \
 				ewarn "Could not create $2!"
 		fi
 
-		if [ -d $2 ]; then
+		if [ -d "$2" ]; then
 			ebegin "Mounting $2"
-			if ! fstabinfo --mount $2; then
-				mount -n -t $1 -o noexec,nosuid$4 $5 $2
+			if ! fstabinfo --mount "$2"; then
+				mount -n -t "$1" -o noexec,nosuid"$4" "$5" "$2"
 			fi
 			eend $?
 		fi

init.d/dmesg.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Set the dmesg level for a cleaner boot"
@@ -7,12 +7,11 @@ description="Set the dmesg level for a cleaner boot"
 depend()
 {
 	before dev modules
-	keyword -vserver
 }
 
 start()
 {
-	if [ -n "$dmesg_level" ]; then
-		dmesg -n$dmesg_level
+	if [ -n "${dmesg_level}" ]; then
+		dmesg -n"${dmesg_level}"
 	fi
 }

init.d/dumpon.in

@@ -1,18 +1,18 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Configures a specific kernel dump device."
 
 depend() {
 	need swap
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start() {
 	# Setup any user requested dump device
-	if [ -n "$dump_device" ]; then
-		ebegin "Activating kernel core dump device ($dump_device)"
+	if [ -n "${dump_device}" ]; then
+		ebegin "Activating kernel core dump device (${dump_device})"
 		dumpon ${dump_device}
 		eend $?
 	fi

init.d/fsck.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Check and repair filesystems according to /etc/fstab"
@@ -9,7 +9,7 @@ _IFS="
 depend()
 {
 	use dev clock modules
-	keyword -jail -openvz -prefix -timeout -vserver -lxc
+	keyword nojail noopenvz noprefix notimeout novserver
 }
 
 _abort() {
@@ -19,17 +19,12 @@ _abort() {
 
 # We should only reboot when first booting
 _reboot() {
-	if [ "$RC_RUNLEVEL" = "$RC_BOOTLEVEL" ]; then
+	if [ "${RC_RUNLEVEL}" = "${RC_BOOTLEVEL}" ]; then
 		reboot "$@"
 		_abort || return 1
 	fi
 }
 
-_forcefsck()
-{
-	[ -e /forcefsck ] || get_bootparam forcefsck
-}
-
 start()
 {
 	local fsck_opts= p= check_extra=
@@ -38,54 +33,49 @@ start()
 		ewarn "Skipping fsck due to /fastboot"
 		return 0
 	fi
-	if _forcefsck; then
-		fsck_opts="$fsck_opts -f"
+	if [ -e /forcefsck ] || get_bootparam forcefsck; then
+		fsck_opts="${fsck_opts} -f"
 		check_extra="(check forced)"
-	elif ! yesno ${fsck_on_battery:-YES} && ! on_ac_power; then
-		ewarn "Skipping fsck due to not being on AC power"
-		return 0
 	fi
 
-	if [ -n "$fsck_passno" ]; then
-		check_extra="[passno $fsck_passno] $check_extra"
+	if [ -n "${fsck_passno}" ]; then
+		check_extra="[passno ${fsck_passno}] ${check_extra}"
 	fi
-	ebegin "Checking local filesystems $check_extra"
-	for p in $fsck_passno; do
-		local IFS="$_IFS"
-		case "$p" in
-			[0-9]*) p="=$p";;
+	ebegin "Checking local filesystems ${check_extra}"
+	for p in ${fsck_passno}; do
+		local IFS="${_IFS}"
+		case "${p}" in
+			[0-9]*) p="=${p}";;
 		esac
-		set -- "$@" $(fstabinfo --passno "$p")
+		set -- "$@" $(fstabinfo --passno "${p}")
 		unset IFS
 	done
 
-	if [ "$RC_UNAME" = Linux ]; then
-		fsck_opts="$fsck_opts -C0 -T"
-		if [ -z "$fsck_passno" ]; then
+	if [ "${RC_UNAME}" = "Linux" ]; then
+		fsck_opts="${fsck_opts} -C0 -T"
+		if [ -z "${fsck_passno}" ]; then
 			fsck_args=${fsck_args--A -p}
 			if echo 2>/dev/null >/.test.$$; then
 				rm -f /.test.$$
-				fsck_opts="$fsck_opts -R"
+				fsck_opts="${fsck_opts} -R"
 			fi
 		fi
 	fi
 
 	trap : INT QUIT
-	fsck ${fsck_args--p} $fsck_opts "$@"
+	fsck ${fsck_args--p} ${fsck_opts} "$@"
 	case $? in
 	0)	eend 0; return 0;;
 	1)	ewend 1 "Filesystems repaired"; return 0;;
-	2|3)	if [ "$RC_UNAME" = Linux ]; then
+	2|3)	if [ "${RC_UNAME}" = "Linux" ]; then
 		 	ewend 1 "Filesystems repaired, but reboot needed"
 	         	_reboot -f
 		else
-			ewend 1 "Filesystems still have errors;" \
-				"manual fsck required"
-			_abort
+			ewend 1 "Filesystems still have errors; manual fsck required"
 		fi;;
-	4)	if [ "$RC_UNAME" = Linux ]; then
-			ewend 1 "Fileystem errors left uncorrected, aborting"
-			_abort
+	4)	if [ "${RC_UNAME}" = "Linux" ]; then
+			ewend 1 "Fileystem errors left uncorrected"
+			return 0
 		else
 		 	ewend 1 "Filesystems repaired, but reboot needed"
 			_reboot
@@ -102,8 +92,7 @@ stop()
 	# Fake function so we always shutdown correctly.
 	_abort() { return 0; }
 	_reboot() { return 0; }
-	_forcefsck() { return 1; }
 
-	yesno $fsck_shutdown && start
+	yesno "${fsck_shutdown}" && start
 	return 0
 }

init.d/hostid.in

@@ -1,15 +1,15 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 extra_commands="reset"
-: ${hostid_file:=/etc/hostid}
+hostid_file=${hostid_file:-/etc/hostid}
 
 depend()
 {
-	use root
+	need root
 	before devd net
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 _set()
@@ -20,14 +20,14 @@ _set()
 		id=$(echo "$1" | md5)
 		id="0x${id%????????????????????????}"
 	fi
-	ebegin "Setting Host ID: $id"
-	sysctl -w kern.hostid="$id" >/dev/null
+	ebegin "Setting Host ID: ${id}"
+	sysctl -w kern.hostid="${id}" >/dev/null
 	eend $? || return 1
 
 	if sysctl -n kern.hostuuid >/dev/null 2>&1; then
 		[ -n "$1" ] && id=$1
-		ebegin "Setting Host UUID: $id"
-		sysctl kern.hostuuid="$id" >/dev/null
+		ebegin "Setting Host UUID: ${id}"
+		sysctl kern.hostuuid="${id}" >/dev/null
 		eend $? || return 1
 	fi
 
@@ -38,37 +38,37 @@ _set()
 # otherwise we generate a random UUID.
 reset()
 {
-	local uuid= x="[0-9a-f]" y="$x$x$x$x"
+	local uuid= x="[0-9a-f]" y="${x}${x}${x}${x}"
 
 	if type kenv >/dev/null 2>&1; then
 		uuid=$(kenv smbios.system.uuid 2>/dev/null)
 	fi
-	case "$uuid" in
-		$y$y-$y-$y-$y-$y$y$y);;
+	case "${uuid}" in
+		${y}${y}-${y}-${y}-${y}-${y}${y}${y});;
 		*) uuid=;;
 	esac
 
-	if [ -n "$uuid" ]; then
-		rm -f "$hostid_file"
+	if [ -n "${uuid}" ]; then
+		rm -f "${hostid_file}"
 	else
 		uuid=$(uuidgen)
-		if [ -z "$uuid" ]; then
+		if [ -z "${uuid}" ]; then
 			eerror "Unable to generate a UUID"
 			return 1
 		fi
-		if ! echo "$uuid" >"$hostid_file"; then
-			eerror "Failed to store UUID in \`$hostid_file'"
+		if ! echo "${uuid}" > "${hostid_file}"; then
+			eerror "Failed to store UUID in \`${hostid_file}'"
 			return 1
 		fi
 	fi
 
-	_set "$uuid"
+	_set "${uuid}"
 }
 
 start()
 {
-	if [ -r "$hostid_file" ]; then
-		_set $(cat "$hostid_file") 
+	if [ -r "${hostid_file}" ]; then
+		_set $(cat "${hostid_file}") 
 	else
 		reset
 	fi

init.d/hostname.in

@@ -1,17 +1,17 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Sets the hostname of the machine."
 
 depend() {
-	keyword -prefix
+	keyword noprefix
 }
 
 start()
 {
 	hostname=${hostname-${HOSTNAME-localhost}}
-	ebegin "Setting hostname to $hostname"
-	hostname "$hostname"
+	ebegin "Setting hostname to ${hostname}"
+	hostname "${hostname}"
 	eend $? "Failed to set the hostname"
 }

init.d/hwclock.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 extra_commands="save show"
@@ -8,11 +8,12 @@ description="Sets the local clock to UTC or Local Time."
 description_save="Saves the current time in the BIOS."
 description_show="Displays the current time in the BIOS."
 
-: ${clock_adjfile:=${CLOCK_ADJFILE}}
-: ${clock_args:=${CLOCK_OPTS}}
-: ${clock_systohc:=${CLOCK_SYSTOHC}}
-: ${clock:=${CLOCK:-UTC}}
-if [ "$clock" = "UTC" ]; then
+clock_adjfile=${clock_adjfile:-${CLOCK_ADJFILE}}
+clock_args=${clock_args:-${CLOCK_OPTS}}
+clock_systohc=${clock_systohc:-${CLOCK_SYSTOHC}}
+
+clock=${clock:-${CLOCK:-UTC}}
+if [ "${clock}" = "UTC" ]; then
 	utc="UTC"
 	utc_cmd="--utc"
 else
@@ -23,12 +24,12 @@ fi
 depend()
 {
 	provide clock
-	if yesno $clock_adjfile; then
+	if yesno ${clock_adjfile}; then
 		use root
 	else
 		before *
 	fi
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	keyword noopenvz noprefix nouml novserver noxenu
 }
 
 setupopts()
@@ -46,7 +47,7 @@ setupopts()
 			;;
 	esac
 
-	case "$utc" in
+	case "${utc}" in
 		UTC|Local" "Time);;
 		*) unset utc_cmd;;
 	esac
@@ -57,7 +58,7 @@ _hwclock()
 {
 	local err="$(hwclock "$@" 2>&1 >/dev/null)"
 
-	[ -z "$err" ] && return 0
+	[ -z "${err}" ] && return 0
 	echo "${err}" >&2
 	return 1
 }
@@ -67,38 +68,38 @@ start()
 	local retval=0 errstr=""
 	setupopts
 
-	if [ -z "$utc_cmd" ]; then
-		ewarn "Not setting clock for $utc system"
+	if [ -z "${utc_cmd}" ]; then
+		ewarn "Not setting clock for ${utc} system"
 		return 0
 	fi
 
-	ebegin "Setting system clock using the hardware clock [$utc]"
+	ebegin "Setting system clock using the hardware clock [${utc}]"
 	if [ -e /proc/modules ]; then
 		local rtc=
 		for rtc in /dev/rtc /dev/rtc[0-9]*; do
-			[ -e "$rtc" ] && break
+			[ -e "${rtc}" ] && break
 		done
 		if [ ! -e "${rtc}" ]; then
 			modprobe -q rtc-cmos || modprobe -q rtc || modprobe -q genrtc
 		fi
 	fi
 
-	if [ -e /etc/adjtime ] && yesno $clock_adjfile; then
-		_hwclock --adjust $utc_cmd
-		retval=$(($retval + $?))
+	if [ -e /etc/adjtime ] && yesno ${clock_adjfile}; then
+		_hwclock --adjust ${utc_cmd}
+		retval=$((${retval} + $?))
 	fi
 	
 	# If setting UTC, don't bother to run hwclock when first booting
 	# as that's the default
-	if [ "$PREVLEVEL" != N -o \
-		"$utc_cmd}" != --utc -o \
-		-n "$clock_args" ];
+	if [ "${PREVLEVEL}" != "N" -o \
+		"${utc_cmd}" != "--utc" -o \
+		-n "${clock_args}" ];
 	then
-		_hwclock --hctosys $utc_cmd $clock_args
-		retval=$(($retval + $?))
+		_hwclock --hctosys ${utc_cmd} ${clock_args}
+		retval=$((${retval} + $?))
 	fi
 	
-	eend $retval "Failed to set the system clock"
+	eend ${retval} "Failed to set the system clock"
 
 	return 0
 }
@@ -106,37 +107,37 @@ start()
 stop()
 {
 	# Don't tweak the hardware clock on LiveCD halt.
-	[ -n "$CDBOOT" ] && return 0
-	yesno $clock_systohc || return 0
+	[ -n "${CDBOOT}" ] && return 0
+	yesno ${clock_systohc} || return 0
 
 	local retval=0 errstr=""
 	setupopts
 
-	[ -z "$utc_cmd" ] && return 0
+	[ -z "${utc_cmd}" ] && return 0
 
-	ebegin "Setting hardware clock using the system clock" "[$utc]"
+	ebegin "Setting hardware clock using the system clock" "[${utc}]"
 
-	if ! yesno $clock_adjfile; then
+	if ! yesno "${clock_adjfile}"; then
 		# Some implementations don't handle adjustments
-		if LC_ALL=C hwclock --help 2>&1 | grep -q "\-\-noadjfile"; then
-			utc_cmd="$utc_cmd --noadjfile"
+		if LC_ALL=C hwclock --help | grep -q "\-\-noadjfile"; then
+			utc_cmd="${utc_cmd} --noadjfile"
 		fi
 	fi
 
-	_hwclock --systohc $utc_cmd $clock_args
+	_hwclock --systohc ${utc_cmd} ${clock_args}
 	retval=$?
 
-	eend $retval "Failed to sync clocks" 
+	eend ${retval} "Failed to sync clocks" 
 }
 
 save()
 {
-	clock_systohc=yes
+	clock_systohc="yes"
 	stop
 }
 
 show()
 {
 	setupopts
-	hwclock --show "$utc_cmd" $clock_args
+	hwclock --show "${utc_cmd}" ${clock_args} 
 }

init.d/ipfw.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 # This is based on /etc/rc.firewall and /etc/rc.firewall6 from FreeBSD
@@ -13,7 +13,7 @@ opts="panic showstatus"
 depend() {
 	before net
 	provide firewall
-	keyword -jail
+	keyword nojail
 }
 
 ipfw() {
@@ -95,24 +95,24 @@ start() {
 	
 	# Add permits for this workstations published services below
 	# Only IPs and nets in firewall_allowservices is allowed in.
-	for i in $ipfw_ip_in; do
-		for p in $ipfw_ports_in; do
-			ipfw add pass tcp from $i to me $p
+	for i in ${ipfw_ip_in}; do
+		for p in ${ipfw_ports_in}; do
+			ipfw add pass tcp from ${i} to me ${p}
 		done
 	done
 
 	# Allow all connections from trusted IPs.
 	# Playing with the content of firewall_trusted could seriously
 	# degrade the level of protection provided by the firewall.
-	for i in $ipfw_ip_trust; do
-		ipfw add pass ip from $i to me
+	for i in ${ipfw_ip_trust}; do
+		ipfw add pass ip from ${i} to me
 	done
 	
 	ipfw add 65000 count ip from any to any
 
 	# Drop packets to ports where we don't want logging
-	for p in $ipfw_ports_nolog; do
-		ipfw add deny { tcp or udp } from any to any $p in
+	for p in ${ipfw_ports_nolog}; do
+		ipfw add deny { tcp or udp } from any to any ${p} in
 	done
 
 	# Broadcasts and muticasts
@@ -129,10 +129,10 @@ start() {
 
 	# Deny and (if wanted) log the rest unconditionally.
 	if yesno ${ipfw_log_deny:-no}; then
-		log=log
+		log="log"
 		sysctl net.inet.ip.fw.verbose=1 >/dev/null
 	fi
-	ipfw add deny $log ip from any to any
+	ipfw add deny ${log} ip from any to any
 
 	eend 0
 }

init.d/keymaps.in

@@ -1,27 +1,26 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Applies a keymap for the consoles."
 
+ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
+unicode=${unicode:-${UNICODE}}
+keymap=${keymap:-${KEYMAP}}
+extended_keymaps=${extended_keymaps:-${EXTENDED_KEYMAPS}}
+windowkeys=${windowkeys:-${SET_WINDOWSKEYS}} 
+fix_euro=${fix_euro:-${FIX_EURO}}
+dumpkeys_charset=${dumpkeys_charset:-${DUMPKEYS_CHARSET}}
+
 depend()
 {
 	need localmount termencoding
-	after bootmisc
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
+	keyword noopenvz noprefix nouml novserver noxenu
 }
 
 start()
 {
-	ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
-	: ${unicode:=$UNICODE}
-	: ${keymap:=$KEYMAP}
-	: ${extended_keymaps:=$EXTENDED_KEYMAPS}
-	: ${windowkeys:=$SET_WINDOWSKEYS} 
-	: ${fix_euro:=$FIX_EURO}
-	: ${dumpkeys_charset:=${DUMPKEYS_CHARSET}}
-
-	if [ -z "$keymap" ]; then
+	if [ -z "${keymap}" ]; then
 		eerror "You need to setup keymap in /etc/conf.d/keymaps first"
 		return 1
 	fi
@@ -34,37 +33,35 @@ start()
 		echo 1 > /proc/sys/dev/mac_hid/keyboard_sends_linux_keycodes
 	fi
 
-	local wkeys= kmode="-a" msg="ASCII"
-	if yesno $unicode; then
+	ebegin "Loading key mappings [${keymap}]"
+	local loadkeys_uni= wkeys= kmode="-a" msg="ASCII"
+	if yesno ${unicode}; then
+		loadkeys_uni="--unicode"
 		kmode="-u"
 		msg="UTF-8"
 	fi
-	yesno $windowkeys && wkeys="windowkeys"
-
-	# Set terminal encoding to either ASCII or UNICODE.
-	# See utf-8(7) for more information.
-	ebegin "Setting keyboard mode [$msg]"
-	n=1
-	while [ $n -le $ttyn ]; do
-		kbd_mode $kmode -C $ttydev$n
-		n=$(($n + 1))
-	done
-	eend 0
-
-	ebegin "Loading key mappings [$keymap]"
-	loadkeys -q $wkeys $keymap $extended_keymaps
+	yesno ${windowkeys} && wkeys="windowkeys"
+	loadkeys -q ${loadkeys_uni} ${wkeys} ${keymap} ${extended_keymaps} 
 	eend $? "Error loading key mappings" || return $?
 
-	if yesno $fix_euro; then
+	if yesno ${fix_euro}; then
 		ebegin "Fixing font for euro symbol"
 		# Fix some fonts displaying the Euro, #173528.
 		echo "altgr keycode 18 = U+20AC" | loadkeys -q
 		eend $?
 	fi
 
-	# Save the keymapping for use immediately at boot
-	if [ -w "$RC_LIBEXECDIR" ]; then
-		mkdir -p "$RC_LIBEXECDIR"/console
-		dumpkeys >"$RC_LIBEXECDIR"/console/keymap
+	# Set terminal encoding to either ASCII or UNICODE.
+	# See utf-8(7) for more information.
+	ebegin "Setting keyboard mode [${msg}]"
+	if yesno ${unicode}; then
+		dumpkeys ${dumpkeys_charset:+-c} \
+			${dumpkeys_charset} | loadkeys --unicode
 	fi
+	n=1
+	while [ ${n} -le "${ttyn}" ]; do
+		kbd_mode "${kmode}" -C "${ttydev}${n}"
+		n=$((${n} + 1))
+	done
+	eend 0
 }

init.d/killprocs.in

@@ -1,12 +1,12 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Kill all processes so we can unmount disks cleanly."
 
 depend()
 {
-	keyword -prefix
+	keyword noprefix
 }
 
 start()

init.d/local.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Executes user commands in /etc/conf.d/local"
@@ -7,7 +7,7 @@ description="Executes user commands in /etc/conf.d/local"
 depend()
 {
 	after *
-	keyword -timeout
+	keyword notimeout
 }
 
 start()
@@ -18,6 +18,11 @@ start()
 		local_start
 	fi
 
+	# Support old configs
+	if [ -e @SYSCONFDIR@/conf.d/local.start ]; then
+		. @SYSCONFDIR@/conf.d/local.start
+	fi
+
 	eend $? "Failed to start local"
 }
 
@@ -29,5 +34,10 @@ stop()
 		local_stop
 	fi
 
+	# Support old configs
+	if [ -e @SYSCONFDIR@/conf.d/local.stop ]; then
+		. @SYSCONFDIR@/conf.d/local.stop
+	fi
+
 	eend $? "Failed to stop local"
 }

init.d/localmount.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Mounts disks and swap according to /etc/fstab."
@@ -8,22 +8,19 @@ depend()
 {
 	need fsck
 	use lvm modules mtab
-	keyword -jail -openvz -prefix -vserver -lxc
+	keyword nojail noopenvz noprefix novserver
 }
 
 start()
 {
 	# Mount local filesystems in /etc/fstab.
-	local types="noproc" x= no_netdev=
-	for x in $net_fs_list; do
+	local types="noproc" x=
+	for x in ${net_fs_list}; do
 		types="${types},${x}"
 	done
 
-	if [ "$RC_UNAME" = Linux ]; then
-		no_netdev="-O no_netdev"
-	fi
 	ebegin "Mounting local filesystems"
-	mount -at "$types" $no_netdev
+	mount -at "${types}"
 	eend $? "Some local filesystem failed to mount"
 
 	# Always return 0 - some local mounts may not be critical for boot
@@ -34,33 +31,39 @@ stop()
 {
 	# We never unmount / or /dev or $RC_SVCDIR
 	local x= no_umounts_r="/|/dev|/dev/.*|${RC_SVCDIR}"
-	no_umounts_r="${no_umounts_r}|/bin|/sbin|/lib|/libexec"
+
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
-	OIFS=$IFS SIFS=${IFS-y}
+	OIFS=${IFS} SIFS=${IFS-y}
 	IFS=$IFS:
-	for x in $no_umounts $RC_NO_UMOUNTS; do
-		no_umounts_r="$no_umounts_r|$x"
+	for x in ${no_umounts} ${RC_NO_UMOUNTS}; do
+		no_umounts_r="${no_umounts_r}|${x}"
 	done
-	if [ "$SIFS" = y ]; then
+	if [ "${SIFS}" = "y" ]; then
 		IFS=$OIFS
 	else
 		unset IFS
 	fi
 
-	if [ "$RC_UNAME" = Linux ]; then
-		no_umounts_r="$no_umounts_r|/proc|/proc/.*|/sys|/sys/.*"
+	if [ "${RC_UNAME}" = "Linux" ]; then
+		no_umounts_r="${no_umounts_r}|/proc|/proc/.*|/sys|/sys/.*"
 	fi
-	no_umounts_r="^($no_umounts_r)$"
+	no_umounts_r="^(${no_umounts_r})$"
 
 	# Flush all pending disk writes now
 	sync; sync
 
-	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
+	# Try to unmount all tmpfs filesystems not in use, else a deadlock may
+	# occure, bug #13599.
+	# As $RC_SVCDIR may also be tmpfs we cd to it to lock it
+	cd "${RC_SVCDIR}"
+	umount -a -t tmpfs 2>/dev/null
+
+	. "${RC_LIBDIR}"/sh/rc-mount.sh
 
 	# Umount loopback devices
 	einfo "Unmounting loopback devices"
 	eindent
-	do_unmount "umount -d" --skip-point-regex "$no_umounts_r" \
+	do_unmount "umount -d" --skip-point-regex "${no_umounts_r}" \
 		--node-regex "^/dev/loop"
 	eoutdent
 
@@ -69,12 +72,12 @@ stop()
 	einfo "Unmounting filesystems"
 	eindent
 	local fs=
-	for x in $net_fs_list; do
-		fs="$fs${fs:+|}$x"
+	for x in ${net_fs_list}; do
+		fs="${fs}${fs:+|}${x}"
 	done
-	[ -n "$fs" ] && fs="^($fs)$"
-	do_unmount umount --skip-point-regex "$no_umounts_r" \
-		${fs:+--skip-fstype-regex} $fs --nonetdev
+	[ -n "${fs}" ] && fs="^(${fs})$"
+	do_unmount "umount" --skip-point-regex "${no_umounts_r}" \
+		${fs:+--skip-fstype-regex} ${fs} --nonetdev
 	eoutdent
 
 	return 0

init.d/mixer.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 extra_commands="restore"
@@ -7,7 +7,7 @@ extra_commands="restore"
 depend()
 {
 	need localmount
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 restore()
@@ -17,8 +17,8 @@ restore()
 	eindent
 	for mixer in /dev/mixer*; do
 		if [ -r "/var/db/${mixer#/dev/}-state" ]; then
-			vebegin "$mixer"
-			mixer -f "$mixer" \
+			vebegin "${mixer}"
+			mixer -f "${mixer}" \
 			$(cat "/var/db/${mixer#/dev/}-state") >/dev/null
 			veend $?
 			: $((retval += $?))
@@ -37,11 +37,11 @@ stop()
 	ebegin "Saving mixer settings"
 	eindent
 	for mixer in /dev/mixer*; do
-		vebegin "$mixer"
-		mixer -f "$mixer" -s >/var/db/"${mixer#/dev/}"-state
+		vebegin "${mixer}"
+		mixer -f "${mixer}" -s >/var/db/"${mixer#/dev/}"-state
 		veend $?
 		: $((retval += $?))
 	done
 	eoutdent
-	eend $retval
+	eend ${retval}
 }

init.d/modules.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Loads a user defined list of kernel modules."
@@ -7,7 +7,7 @@ description="Loads a user defined list of kernel modules."
 depend()
 {
 	use isapnp
-	keyword -openvz -prefix -vserver -lxc
+	keyword noopenvz noprefix novserver
 }
 
 start()
@@ -24,40 +24,40 @@ start()
 	local KV_MICRO=${x%%-*}
 
 	local list= x= xx= y= args= mpargs= cnt=0 a=
-	for x in "$KV" \
-		$KV_MAJOR.$KV_MINOR.$KV_MICRO \
-		$KV_MAJOR.$KV_MINOR \
+	for x in "${KV}" \
+		${KV_MAJOR}.${KV_MINOR}.${KV_MICRO} \
+		${KV_MAJOR}.${KV_MINOR} \
 	; do
-		eval list=\$modules_$(shell_var "$x")
-		[ -n "$list" ] && break
+		eval list=\$modules_$(shell_var "${x}")
+		[ -n "${list}" ] && break
 	done
-	[ -z "$list" ] && list=$modules
+	[ -z "${list}" ] && list=${modules}
 
-	for x in $list; do
+	for x in ${list}; do
 		a=${x#*:}
-		if [ "$a" = "$x" ]; then
+		if [ "${a}" = "${x}" ]; then
 			unset mpargs
-			ebegin "Loading module $x"
+			ebegin "Loading module ${x}"
 		else
 			x=${x%%:*}
-			mpargs="-o $a"
-			ebegin "Loading module $x as $a"
+			mpargs="-o ${a}"
+			ebegin "Loading module ${x} as ${a}"
 		fi
-		aa=$(shell_var "$a")
-		xx=$(shell_var "$x")
-		for y in "$KV" \
-			$KV_MAJOR.$KV_MINOR.$KV_MICRO \
-			$KV_MAJOR.$KV_MINOR \
+		aa=$(shell_var "${a}")
+		xx=$(shell_var "${x}")
+		for y in "${KV}" \
+			${KV_MAJOR}.${KV_MINOR}.${KV_MICRO} \
+			${KV_MAJOR}.${KV_MINOR} \
 		; do
-			eval args=\$module_${aa}_args_$(shell_var "$y")
+			eval args=\$module_${aa}_args_$(shell_var "${y}")
 			[ -n "${args}" ] && break
-			eval args=\$module_${xx}_args_$(shell_var "$y")
+			eval args=\$module_${xx}_args_$(shell_var "${y}")
 			[ -n "${args}" ] && break
 		done
-		[ -z "$args" ] && eval args=\$module_${aa}_args
-		[ -z "$args" ] && eval args=\$module_${xx}_args
-		eval modprobe -q "$mpargs" "$x" "$args"
-		eend $? "Failed to load $x" && cnt=$(($cnt + 1))
+		[ -z "${args}" ] && eval args=\$module_${aa}_args
+		[ -z "${args}" ] && eval args=\$module_${xx}_args
+		eval modprobe -q "${mpargs}" "${x}" "${args}"
+		eend $? "Failed to load ${x}" && cnt=$((${cnt} + 1))
 	done
-	einfo "Autoloaded $cnt module(s)"
+	einfo "Autoloaded ${cnt} module(s)"
 }

init.d/mount-ro.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Re-mount filesytems read-only for a clean reboot."
@@ -7,7 +7,7 @@ description="Re-mount filesytems read-only for a clean reboot."
 depend()
 {
 	need killprocs savecache
-	keyword -prefix -openvz -vserver -lxc
+	keyword noprefix noopenvz novserver
 }
 
 start()
@@ -17,30 +17,29 @@ start()
 
 	ebegin "Remounting remaining filesystems read-only"
 	# We need the do_unmount function
-	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
+	. "${RC_LIBDIR}"/sh/rc-mount.sh
 	eindent
 	local m="/dev|/dev/.*|/proc|/proc.*|/sys|/sys/.*|${RC_SVCDIR}" x= fs=
-	m="$m|/bin|/sbin|/lib|/libexec"
 	# RC_NO_UMOUNTS is an env var that can be set by plugins
 	local OIFS=$IFS SIFS=${IFS-y} IFS=$IFS
 	IFS=$IFS:
-	for x in $no_umounts $RC_NO_UMOUNTS; do
-		m="$m|$x"
+	for x in ${no_umounts} ${RC_NO_UMOUNTS}; do
+		m="${m}|${x}"
 	done
-	if [ "$SIFS" = y ]; then
+	if [ "${SIFS}" = y ]; then
 		IFS=$OIFS
 	else
 		unset IFS
 	fi
-	m="^($m)$"
+	m="^(${m})$"
 	fs=
-	for x in $net_fs_list; do
-		fs="$fs${fs:+|}$x"
+	for x in ${net_fs_list}; do
+		fs="${fs}${fs:+|}${x}"
 	done
-	[ -n "$fs" ] && fs="^($fs)$"
+	[ -n "${fs}" ] && fs="^(${fs})$"
 	do_unmount "umount -r" \
-		--skip-point-regex "$m" \
-		${fs:+--skip-fstype-regex} $fs --nonetdev
+		--skip-point-regex "${m}" \
+		${fs:+--skip-fstype-regex} ${fs} --nonetdev
 	eoutdent
 	eend $?
 }

init.d/moused.in

@@ -1,62 +1,62 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 mouse=${RC_SVCNAME##*.}
-if [ -n "$mouse" -a "$mouse" != "moused" ]; then
-	moused_device=/dev/"$mouse"
-	pidfile=/var/run/moused-"$mouse".pid
+if [ -n "${name}" -a "${mouse}" != "moused" ]; then
+	moused_device=/dev/"${mouse}"
+	pidfile=/var/run/moused-"${mouse}".pid
 else
 	pidfile=/var/run/moused.pid
 fi
 name="Console Mouse Daemon"
-[ -n "$moused_device" ] && name="$name ($moused_device)"
+[ -n "${moused_device}" ] && name="${name} (${moused_device})"
 
 depend()
 {
 	need localmount
 	after bootmisc
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start()
 {
-	ebegin "Starting $name" 
+	ebegin "Starting ${name}" 
 
-	if [ -z "$moused_device" ]; then
+	if [ -z "${moused_device}" ]; then
 		local dev=
 		for dev in /dev/psm[0-9]* /dev/ums[0-9]*; do
-			[ -c "$dev" ] || continue
+			[ -c "${dev}" ] || continue
 			[ -e /var/run/moused-"${dev##*/}".pid ] && continue 
-			moused_device=$dev
+			moused_device=${dev}
 			eindent
-			einfo "Using mouse on $moused_device"
+			einfo "Using mouse on ${moused_device}"
 			eoutdent
 			break
 		done
 	fi
 
-	if [ -z "$moused_device" ]; then
+	if [ -z "${moused_device}" ]; then
 		eend 1 "No mouse device found" 
 		return 1
 	fi
 
 	local args=
 	eval args=\$moused_args_${moused_device##*/}
-	[ -z "$args" ] && args=$moused_args
+	[ -z "${args}" ] && args=${moused_args}
 
 	start-stop-daemon --start --exec /usr/sbin/moused \
-		--pidfile "$pidfile" \
-		-- $args -p "$moused_device" -I "$pidfile"
+		--pidfile "${pidfile}" \
+		-- ${args} -p "${moused_device}" -I "${pidfile}"
 	local retval=$?
 	
-	if [ $retval = 0 ]; then
+	if [ ${retval} = 0 ]; then
 		local ttyv=
 		for ttyv in /dev/ttyv*; do
-			vidcontrol < "$ttyv" -m on
+			vidcontrol < "${ttyv}" -m on
 			: $((retval+= $?))
 		done
 	fi
 	
-	eend $retval "Failed to start moused"
+	eend ${retval} "Failed to start moused"
 }

init.d/mtab.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Update /etc/mtab to match what the kernel knows about"
@@ -7,17 +7,11 @@ description="Update /etc/mtab to match what the kernel knows about"
 depend()
 {
 	need root
-	keyword -prefix
+	keyword noprefix
 }
 
 start()
 {
-	# /etc/mtab could be a symlink to /proc/mounts
-	if [ ! -w /etc/mtab -a -L /etc/mtab ]; then
-		eeinfo "Skipping mtab update (non writeable symlink)"
-		return 0
-	fi
-
 	ebegin "Updating /etc/mtab"
 	if ! echo 2>/dev/null >/etc/mtab; then
 		ewend 1 "/etc/mtab is not updateable"

init.d/net.lo.in

@@ -1,8 +1,8 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
-MODULESDIR="${RC_LIBEXECDIR}/net"
+MODULESDIR="${RC_LIBDIR}/net"
 MODULESLIST="${RC_SVCDIR}/nettree"
 _config_vars="config routes"
 
@@ -21,7 +21,7 @@ depend()
 	need localmount
 	after bootmisc
 	provide net
-	keyword -jail -prefix -vserver
+	keyword nojail noprefix novserver
 
 	case "${IFACE}" in
 		lo|lo0);;
@@ -595,7 +595,7 @@ ${routes}"
 		fi
 	fi
 
-	local OIFS="${IFS}" SIFS="${IFS-y}"
+	local OIFS="${IFS}" SIFS=${IFS-y}
 	local IFS="$__IFS"
 	for cmd in ${routes}; do
 		unset IFS
@@ -682,8 +682,8 @@ stop()
 		fi
 	done
 
-	# Only delete addresses for interfaces that exist
-	if _exists; then
+	# Only delete addresses for non PPP interfaces
+	if ! [ "$(command -v is_ppp)" = "is_ppp" ] || ! is_ppp; then
 		_delete_addresses "${IFACE}"
 	fi
 

init.d/netmount.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Mounts network shares according to /etc/fstab."
@@ -11,7 +11,7 @@ need_portmap()
 "
 	set -- $(fstabinfo --options --fstype nfs,nfs4)
 	for opts; do
-		case ,$opts, in
+		case ,${opts}, in
 			*,noauto,*|*,nolock,*);;
 			*) return 0;;
 		esac
@@ -27,15 +27,15 @@ depend()
 	if need_portmap; then
 		pmap="rpc.statd"
 		[ -x @SYSCONFDIR@/init.d/rpcbind ] \
-			&& pmap="$pmap rpcbind" \
-			|| pmap="$pmap portmap"
+			&& pmap="${pmap} rpcbind" \
+			|| pmap="${pmap} portmap"
 	fi
 
 	config /etc/fstab
-	need net $pmap
+	need net ${pmap}
 	use afc-client amd autofs openvpn
 	use dns nfs nfsmount portmap rpcbind rpc.statd rpc.lockd
-	keyword -jail -prefix -vserver
+	keyword nojail noprefix novserver
 }
 
 start()
@@ -43,9 +43,9 @@ start()
 	local myneed= myuse= pmap="portmap" nfsmounts=
 	[ -x @SYSCONFDIR@/init.d/rpcbind ] && pmap="rpcbind"
 
-	local x= fs= rc=
-	for x in $net_fs_list; do
-		case "$x" in
+	local x= fs=
+	for x in ${net_fs_list}; do
+		case "${x}" in
 			nfs|nfs4)
 			# If the nfsmount script took care of the nfs
 			# filesystems, then there's no point in trying
@@ -55,22 +55,17 @@ start()
 			# Only try to mount NFS filesystems if portmap was
 			# started. This is to fix "hang" problems for new
 			# users who do not add portmap to the default runlevel.
-			if need_portmap && ! service_started "$pmap"; then
+			if need_portmap && ! service_started "${pmap}"; then
 				continue
 			fi
 			;;
 		esac
-		fs="$fs${fs:+,}$x"
+		fs="${fs}${fs:+,}${x}"
 	done
 
 	ebegin "Mounting network filesystems"
-	mount -at $fs
-	rc=$?
-	if [ "$RC_UNAME" = Linux ]; then
-		mount -a -O _netdev
-		rc=$?
-	fi
-	ewend $rc "Could not mount all network filesystems"
+	mount -at ${fs}
+	ewend $? "Could not mount all network filesystems"
 	return 0
 }
 
@@ -79,28 +74,24 @@ stop()
 	local x= fs=
 
 	ebegin "Unmounting network filesystems"
-	. "$RC_LIBEXECDIR"/sh/rc-mount.sh
+	. "${RC_LIBDIR}/sh/rc-mount.sh"
 
-	for x in $net_fs_list; do
-		fs="$fs${fs:+,}$x"
+	for x in ${net_fs_list}; do
+		fs="${fs}${fs:+,}${x}"
 	done
-	if [ -n "$fs" ]; then
-		umount -at $fs || eerror "Failed to simply unmount filesystems"
+	if [ -n "${fs}" ]; then
+		umount -at ${fs} || eerror "Failed to simply unmount filesystems"
 	fi
 
 	eindent
 	fs=
-	for x in $net_fs_list; do
-		fs="$fs${fs:+|}$x"
+	for x in ${net_fs_list}; do
+		fs="${fs}${fs:+|}${x}"
 	done
-	[ -n "$fs" ] && fs="^($fs)$"
-	do_unmount umount ${fs:+--fstype-regex} $fs --netdev
+	[ -n "${fs}" ] && fs="^(${fs})$"
+	do_unmount "umount" ${fs:+--fstype-regex} ${fs} --netdev
 	retval=$?
 
 	eoutdent
-	if [ "$RC_UNAME" = Linux ]; then
-		umount -a -O _netdev
-		retval=$?
-	fi
-	eend $retval "Failed to unmount network filesystems"
+	eend ${retval} "Failed to unmount network filesystems"
 }

init.d/network.in

@@ -1,352 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-# This script was inspired by the equivalent rc.d network from NetBSD.
-
-description="Configures network interfaces."
-__nl="
-"
-
-depend()
-{
-	need localmount
-	after bootmisc
-	provide net
-	keyword -jail -prefix -vserver
-}
-
-uniqify()
-{
-	local result= i=
-	for i; do
-		case " $result " in
-		*" $i "*);;
-		*) result="$result $i";;
-		esac
-	done
-	echo "${result# *}"
-}
-
-reverse()
-{
-	local result= i=
-	for i; do
-		result="$i $result"
-	done
-	echo "${result# *}"
-}
-
-sys_interfaces()
-{
-	case "$RC_UNAME" in
-	Linux)
-		local w= rest= i= cmd=$1
-		while read w rest; do
-			i=${w%%:*}
-			[ "$i" != "$w" ] || continue
-			if [ "$cmd" = u ]; then
-				ifconfig "$i" | grep -q "[ ]*UP" || continue
-			fi
-			printf "%s " "$i"
-		done </proc/net/dev
-		;;
-	*)
-		ifconfig -l$1
-		;;
-	esac
-}
-
-tentative()
-{
-	local inet= address= rest=
-
-	case "$RC_UNAME" in
-	Linux)
-		[ -x /sbin/ip ] || [ -x /bin/ip ] || return 1
-		[ -n "$(ip -f inet6 addr show tentative)" ]
-		;;
-	*)
-		local inet= address= rest=
-		LC_ALL=C ifconfig -a | while read inet address rest; do
-	 		case "${inet}" in
-			inet6)
-				case "${rest}" in
-				*" "tentative*) return 2;;
-				esac
-				;;
-			esac
-		done
-		[ $? = 2 ]
-		;;
-	esac
-}
-
-
-auto_interfaces()
-{
-	local ifs= c= f=
-
-	case "$RC_UNAME" in
-	NetBSD)
-		for c in $(ifconfig -C 2>/dev/null); do
-			for f in /etc/ifconfig.${c}[0-9]*; do
-				[ -f "$f" ] && printf "%s" "$f{##*.} "
-			done
-		done
-		;;
-	*)
-		for f in /etc/ifconfig.*; do
-			[ -f "$f" ] && printf "%s" "${f##*.} "
-		done
-		for f in /etc/ip.*; do
-			[ -f "$f" ] && printf "%s" "${f##*.} "
-		done
-		;;
-	esac
-	echo
-}
-
-interfaces()
-{
-	uniqify $(sys_interfaces "$@") $interfaces $(auto_interfaces)
-}
-
-dumpargs()
-{
-	local f="$1"
-
-	shift
-	case "$@" in
-	'')		[ -f "$f" ] && cat "$f";;
-	*"$__nl"*)	echo "$@";;
-	*)
-		(
-		 	set -o noglob
-			IFS=';'; set -- $@
-			IFS="$__nl"; echo "$*"
-		);;
-	esac
-}
-
-intup=false
-runip()
-{
-	local int="$1" err=
-	shift
-
-	# Ensure we have a valid broadcast address
-	case "$@" in
-	*" broadcast "*|*" brd "*) ;;
-	*:*) ;; # Ignore IPv6
-	*) set -- "$@" brd +;;
-	esac
-
-	err=$(LC_ALL=C ip address add "$@" dev "$int" 2>&1)
-	if [ -z "$err" ]; then
-		# ip does not bring up the interface when adding addresses
-		if ! $intup; then
-			ip link set "$int" up
-			intup=true
-		fi
-		return 0
-	fi
-	if [ "$err" = "RTNETLINK answers: File exists" ]; then
-		ip address del "$@" dev "$int" 2>/dev/null
-	fi
-	# Localise the error
-	ip address add "$@" dev "$int"
-}
-
-routeflush()
-{
-	if [ "$RC_UNAME" = Linux ]; then
-		if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
-			ip route flush scope global
-			ip route delete default 2>/dev/null
-		else
-			# Sadly we also delete some link routes, but
-			# this cannot be helped
-			local dest= gate= net= flags= rest=
-			route -n | while read dest gate net flags rest; do
-				[ -z "$net" ] && continue
-				case "$dest" in
-				[0-9]*)	;;
-				*)	continue;;
-				esac
-				local xtra= netmask="netmask $net"
-				case "$flags" in
-				U)	continue;;
-				*H*)	flags=-host; netmask=;;
-				*!*)	flags=-net; xtra=reject;;
-				*)	flags=-net;;
-				esac
-				route del $flags $dest $netmask $xtra
-			done
-			# Erase any default dev eth0 routes
-			route del default 2>/dev/null
-		fi
-	else
-		route -qn flush
-	fi
-}
-
-runargs()
-{
-	dumpargs "$@" | while read -r args; do
-		case "$args" in
-		''|"#"*)	;;
-		*)
-				(
-				 	eval vebegin "${args#*!}"
-					eval "${args#*!}"
-					veend $?
-				);;
-		esac
-	done
-}
-
-start()
-{
-	local cr=0 r= int= intv= cmd= args= upcmd=
-
-	if [ -z "$domainname" -a -s /etc/defaultdomain ]; then
-		domainname=$(cat /etc/defaultdomain)
-	fi
-	if [ -n "$domainname" ]; then
-		ebegin "Setting NIS domainname: $domainname"
-		domainname "$domainname"
-		eend $?
-	fi
-
-	einfo "Starting network"
-	routeflush
-	if [ "$RC_UNAME" = "Linux" ]; then
-		ifconfig lo 127.0.0.1 netmask 255.0.0.0 || cr=1 
-		route add -net 127.0.0.0 netmask 255.0.0.0 \
-			gw 127.0.0.1 reject 2>/dev/null
-	else
-		ifconfig lo0 127.0.0.1 netmask 255.0.0.0 || cr=1
-		route -q add -inet 127.0.0.0 -netmask 255.0.0.0 \
-			127.0.0.1 -reject || cr=1
-	fi
-	eindent
-	for int in $(interfaces); do
-		local func= cf=
-		intv=$(shell_var "$int")
-		eval upcmd=\$ifup_$intv
-		for func in ip ifconfig; do
-			eval cmd=\$${func}_$intv
-			if [ -n "$cmd" -o -f /etc/"$func.$int" ]; then
-				cf=/etc/"$func.$int"
-				break
-			fi
-		done
-		[ -n "$cf" -o -n "$upcmd" -o \
-			-f /etc/ifup."$int" -o -f "$cf" ] || continue
-		veinfo "$int"
-		case "$func" in
-		ip)	func=runip; intup=false;;
-		esac
-		eindent
-		runargs /etc/ifup."$int" "$upcmd"
-		r=0
-		dumpargs "$cf" "$cmd" | while read -r args; do
-			case "$args" in
-			''|"#"*)	;;
-			"!"*)
-					(
-					 	eval vebegin "${args#*!}"
-						eval "${args#*!}"
-						veend $?
-					);;
-			*)
-					(
-					 	set -o noglob
-						eval set -- "$args"
-						vebegin "$@"
-						$func "$int" "$@"
-						veend $?
-					);;
-			esac
-		done
-		eoutdent
-	done
-	eoutdent
-	eend $cr
-
-	# Wait for any inet6 tentative addresses
-	r=5
-	while [ $r -gt 0 ]; do
-		tentative || break
-		[ $r = 5 ] && vebegin "Waiting for tentative addresses"
-		sleep 1
-		r=$(($r - 1))
-	done
-	if [ $r != 5 ]; then
-		[ $r != 0 ]
-		veend $?
-	fi
-	
-	if [ -n "$defaultroute" ]; then
-		ebegin "Setting default route $defaultroute"
-		route add default $defaultroute
-		eend $?
-	elif [ -n "$defaultiproute" ]; then
-		ebegin "Setting default route $defaultiproute"
-		ip route add default $defaultiproute
-		eend $?
-	fi
-
-	if [ -n "$defaultroute6" ]; then
-		ebegin "Setting default route $defaultroute6"
-		if [ "$RC_UNAME" = Linux ]; then
-			routecmd="route -A inet6 add"
-		else
-			routecmd="route -inet6 add"
-		fi
-		$routecmd default $defaultroute6
-		eend $?
-	elif [ -n "$defaultiproute6" ]; then
-		ebegin "Setting default route $defaultiproute6"
-		ip -f inet6 route add default $defaultiproute6
-		eend $?
-	fi
-
-	return 0
-}
-
-stop()
-{
-	# Don't stop the network at shutdown.
- 	# We don't use the noshutdown keyword so that we are started again
-	# correctly if we go back to multiuser.
-	yesno ${shutdown_network:-YES} && yesno $RC_GOINGDOWN && return 0
-
-	local int= intv= cmd= downcmd= r=
-	einfo "Stopping network"
-	routeflush
-	eindent
-	for int in $(reverse $(interfaces u)); do
-		intv=$(shell_var "$int")
-		eval downcmd=\$ifdown_$intv
-		eval cmd=\$ip_$intv
-		[ -z "$cmd" ] && eval cmd=\$ifconfig_$intv
-		if [ -n "$cmd" -o -f /etc/ip."$int" -o \
-			-f /etc/ifconfig."$int" -o \
-			-n "$downcmd" -o -f /etc/ifdown."$int" ];
-		then
-			veinfo "$int"
-			runargs /etc/ifdown."$int" "$downcmd"
-			if [ -x /sbin/ip ] || [ -x /bin/ip ]; then
-				# We need to do this, otherwise we may
-				# fail to add things correctly on restart
-				ip address flush dev "$int" 2>/dev/null
-			fi
-			ifconfig "$int" down 2>/dev/null
-			ifconfig "$int" destroy 2>/dev/null
-		fi
-	done
-	eoutdent
-	eend 0
-}

init.d/newsyslog.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 required_files="/etc/newsyslog.conf"
@@ -7,12 +7,12 @@ required_files="/etc/newsyslog.conf"
 depend()
 {
 	need localmount
-	keyword -prefix
+	keyword noprefix
 }
 
 start()
 {
 	ebegin "Creating and/or trimming log files"
-	newsyslog -s $newsyslog_args
+	newsyslog -s ${newsyslog_args}
 	eend $?
 }

init.d/nscd.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/nscd
-command_args=$nscd_args
+command_args="${nscd_args}"
 pidfile=/var/run/nscd.pid
 name="Name Service Cache Daemon"
 
@@ -16,7 +16,7 @@ depend() {
 }
 
 flush() {
-	ebegin "Flushing $name"
+	ebegin "Flushing ${name}"
 	nscd -I all >/dev/null
 	eend $?
 }

init.d/numlock.in

@@ -1,15 +1,15 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Turns numlock on for the consoles."
 
-ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
+ttyn=${rc_tty_number:-${RC_TTY_NUMBER}:-12}
 
 depend()
 {
 	need localmount
-	keyword -openvz -prefix -vserver -lxc
+	keyword noopenvz noprefix novserver
 }
 
 _setleds()
@@ -19,12 +19,12 @@ _setleds()
 	local dev=/dev/tty t= i=1 retval=0
 	[ -d /dev/vc ] && dev=/dev/vc/
 
-	while [ $i -le $ttyn ]; do
-		setleds -D "$1"num < $dev$i || retval=1
-		i=$(($i + 1))
+	while [ ${i} -le ${ttyn} ]; do
+		setleds -D "$1"num < ${dev}${i} || retval=1
+		i=$((${i} + 1))
 	done
 
-	return $retval
+	return ${retval}
 }
 
 start()

init.d/pf.in

@@ -1,54 +1,54 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 name="Packet Filter"
-: ${pf_conf:=${pf_rules:-/etc/pf.conf}}
-required_files=$pf_conf
+pf_conf=${pf_conf:-${pf_rules:-/etc/pf.conf}}
+required_files=${pf_conf}
 
 extra_commands="checkconfig showstatus"
 extra_started_commands="reload"
 
 depend() {
 	need localmount
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start()
 {
-	ebegin "Starting $name"
+	ebegin "Starting ${name}"
 	if type kldload >/dev/null 2>&1; then
 		kldload pf 2>/dev/null
 	fi
 	pfctl -q -F all
-	pfctl -q -f "$pf_conf" $pf_args
+	pfctl -q -f "${pf_conf}" ${pf_args}
 	pfctl -q -e
 	eend $?
 }
 
 stop()
 {
-	ebegin "Stopping $name"
+	ebegin "Stopping ${name}"
 	pfctl -q -d
 	eend $?
 }
 
 checkconfig()
 {
-	ebegin "Checking $name configuration"
-	pfctl -n -f "$pf_conf"
+	ebegin "Checking ${name} configuration"
+	pfctl -n -f "${pf_conf}"
 	eend $?
 }
 
 reload()
 {
-	ebegin "Reloading $name rules."
-	pfctl -q -n -f "$pf_conf" && \
+	ebegin "Reloading ${name} rules."
+	pfctl -q -n -f "${pf_conf}" && \
 	{ 
 		# Flush everything but existing state entries that way when
 		# rules are read in, it doesn't break established connections.
 		pfctl -q -Fnat -Fqueue -Frules -FSources -Finfo -FTables -Fosfp
-		pfctl -q -f "$pf_conf" $pf_args
+		pfctl -q -f "${pf_conf}" ${pf_args}
 	}
 	eend $?
 }

init.d/powerd.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/powerd
-command_args=$powerd_args
+command_args=${powerd_args}
 pidfile=/var/run/powerd.pid
 name="Power Control Daemon"
 
@@ -12,16 +12,16 @@ depend()
 	need localmount
 	use logger
 	after bootmisc
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start_pre()
 {
-	if [ -n "$powerd_battery_mode" ]; then
-		command_args="$command_args -b $powerd_battery_mode"
+	if [ -n "${powerd_battery_mode}" ]; then
+		command_args="${command_args} -b ${powerd_battery_mode}"
 	fi
 	if [ -n "${powerd_ac_mode}" ]; then
-		command_args="$command_args -a $powerd_ac_mode"
+		command_args="${command_args} -a ${powerd_ac_mode}"
 	fi
 }
 
@@ -29,7 +29,7 @@ stop_post()
 {
 	local level=$(sysctl -n dev.cpu.0.freq_levels |
 	    sed -e 's:/.*::')
-	if [ -n "$level" ]; then
-		sysctl dev.cpu.0.freq="$level" >/dev/null
+	if [ -n "${level}" ]; then
+		sysctl dev.cpu.0.freq="${level}" >/dev/null
 	fi
 }

init.d/procfs.in

@@ -1,19 +1,19 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Mounts misc filesystems in /proc."
 
 depend()
 {
-	use modules devfs
+	use devfs
 	need localmount
-	keyword -openvz -prefix -vserver -lxc
+	keyword noopenvz noprefix novserver
 }
 
 start()
 {
-	# Make sure we insert usbcore if it's a module
+	# Make sure we insert usbcore if its a module
 	if [ -f /proc/modules -a ! -d /proc/bus/usb ]; then
 		modprobe -q usbcore
 	fi
@@ -25,13 +25,13 @@ start()
 	# while older kernels have 'usbdevfs'.
 	if [ -d /proc/bus/usb -a ! -e /proc/bus/usb/devices ]; then
 		local usbfs=$(grep -Fow usbfs /proc/filesystems ||
-			grep -Fow usbdevfs /proc/filesystems)
-		if [ -n "$usbfs" ]; then
-			ebegin "Mounting USB device filesystem [$usbfs]"
+					  grep -Fow usbdevfs /proc/filesystems)
+		if [ -n "${usbfs}" ]; then
+			ebegin "Mounting USB device filesystem [${usbfs}]"
 			local usbgid="$(getent group usb | \
 				sed -e 's/.*:.*:\(.*\):.*/\1/')"
-			mount -t $usbfs \
-				-o ${usbgid:+devmode=0664,devgid=$usbgid,}noexec,nosuid \
+			mount -t ${usbfs} \
+				-o ${usbgid:+devmode=0664,devgid=${usbgid},}noexec,nosuid \
 				usbfs /proc/bus/usb
 			eend $?
 		fi
@@ -48,8 +48,7 @@ start()
 	fi
 
 	# Setup Kernel Support for miscellaneous Binary Formats
-	if [ -d /proc/sys/fs/binfmt_misc ] \
-		&& ! mountinfo -q /proc/sys/fs/binfmt_misc; then
+	if [ -d /proc/sys/fs/binfmt_misc ] && ! mountinfo -q /proc/sys/fs/binfmt_misc; then
 		if grep -qs binfmt_misc /proc/filesystems; then
 			ebegin "Mounting misc binary format filesystem"
 			mount -t binfmt_misc -o nodev,noexec,nosuid \

init.d/rarpd.in

@@ -1,23 +1,28 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/rarpd
-command_args="-f $rarpd_args"
+command_args="-f ${rarpd_args}"
 pidfile=/var/run/rarpd.pid
 name="Reverse ARP Daemon"
-required_files=/etc/ethers
+required_files="/etc/ethers"
 
-if [ -z "$rarpd_interface" ]; then
-	command_args="$command_args -a"
+if [ -z "${rarpd_interface}" ]; then
+	command_args="${command_args} -a"
 else
-	command_args="$command_args $rarpd_interface"
+	command_args="${command_args} ${rarpd_interface}"
 fi
-command_background=YES
+command_background="YES"
 
 depend()
 {
 	need localmount
 	after bootmisc
-	need net
+
+	if [ -z "${rarpd_interface}" ]; then
+		need net
+	else
+		net net."${rarpd_interface}"
+	fi
 }

init.d/rc-enabled.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend()
@@ -7,35 +7,34 @@ depend()
 	need localmount net
 	after *
 	before local
-	keyword -prefix
+	keyword noprefix
 }
 
 start()
 {
 	ebegin "Starting local rc services"
-	local svc= enabled= retval=0 service= pkgdir=
-	[ -n "@PKG_PREFIX@" ] && pkgdir="@PKG_PREFIX@/etc/rc.d/*"
-	for svc in $(rcorder /etc/rc.d/* $pkgdir 2>/dev/null); do
+	local svc= enabled= retval=0 service=
+	for svc in $(rcorder /etc/rc.d/* @PKG_PREFIX@/etc/rc.d/* 2>/dev/null); do
 		[ -x "$svc" ] || continue
 		service=${svc##*/}
 
 		# Skip these services
 		for s in cleartmp moused; do
-			[ "$s" = "$service" ] && continue 2
+			[ "${s}" = "${service}" ] && continue 2
 		done
 
 		# If we have an init script for this service, continue
-		rc-service --exists "$service" && continue
+		rc-service --exists "${service}" && continue
 
-		# Ensure that the users rc.conf will start us
+		# Ensure that the users rc.conf will start us - ignore the defaults
 		eval enabled=\$${svc##*/}_enable
-		yesno $enabled || yesno ${svc##*/} || continue
+		yesno ${enabled} || yesno ${svc##*/} || continue
 
 		# Good to go!
-		"$svc" start && started="$started $svc"
+		"$svc" start && started="${started} ${svc}"
 		: $((retval += $?))
 	done
-	service_set_value started "$started"
+	service_set_value started "${started}"
 	eend $retval "Some local rc services failed to start"
 	return 0
 }
@@ -45,7 +44,7 @@ stop()
 	ebegin "Stopping local rc services"
 	local svc= retval=0
 	for svc in $(rcorder $(service_get_value started) 2>/dev/null | sort -r); do
-		"$svc" stop
+		"${svc}" stop
 		: $((retval += $?))
 	done
 	eend $retval "Some local rc services failed to stop"

init.d/root.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Mount the root fs read/write"
@@ -7,22 +7,18 @@ description="Mount the root fs read/write"
 depend()
 {
 	need fsck
-	keyword -jail -openvz -prefix -vserver -lxc
+	keyword nojail noopenvz noprefix novserver
 }
 
 start()
 {
-	case ",$(fstabinfo -o /)," in
-	*,ro,*) return 0;;
-	esac
-
 	if echo 2>/dev/null >/.test.$$; then
 		rm -f /.test.$$ /fastboot /forcefsck
 		return 0
 	fi
 
 	ebegin "Remounting root filesystem read/write"
-	case "$RC_UNAME" in
+	case "${RC_UNAME}" in
 		Linux)	mount -n -o remount,rw /;;
 		*)	mount -u -o rw /;;
 	esac

init.d/rpcbind.in

@@ -1,9 +1,9 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/rpcbind
-command_args=$rpcbind_args
+command_args=${rpcbind_args}
 name="RPC program number mapper"
 
 depend()

init.d/savecache.in

@@ -1,32 +1,25 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Saves the caches OpenRC uses to non volatile storage"
 
 start()
 {
-	if [ -e "$RC_SVCDIR"/clock-skewed ]; then
-		ewarn "WARNING: clock skew detected!"
-		if ! yesno "savecache_skewed"; then
-			eerror "Not saving deptree cache"
-			return 1
-		fi
-	fi
 	ebegin "Saving dependency cache"
-	if [ ! -d "$RC_LIBEXECDIR"/cache ]; then
-		rm -rf "$RC_LIBEXECDIR"/cache
-		if ! mkdir "$RC_LIBEXECDIR"/cache; then
+	if [ ! -d "${RC_LIBDIR}"/cache ]; then
+		rm -rf "${RC_LIBDIR}"/cache
+		if ! mkdir "${RC_LIBDIR}"/cache; then
 			eend $?
 			return $?
 		fi
 	fi
 	local save=
-	for x in deptree depconfig shutdowntime softlevel nettree rc.log; do
-		[ -e "$RC_SVCDIR/$x" ] && save="$save $RC_SVCDIR/$x"
+	for x in deptree depconfig softlevel nettree rc.log; do
+		[ -e "${RC_SVCDIR}/${x}" ] && save="${save} ${RC_SVCDIR}/${x}"
 	done
-	if [ -n "$save" ]; then
-		cp -p $save "$RC_LIBEXECDIR"/cache 2>/dev/null
+	if [ -n "${save}" ]; then
+		cp -p ${save} "${RC_LIBDIR}"/cache 2>/dev/null
 	fi
 	eend $?
 }

init.d/savecore.in

@@ -1,5 +1,5 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Saves a kernel dump."
@@ -7,30 +7,30 @@ description="Saves a kernel dump."
 depend()
 {
 	need localmount
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start()
 {
-	: ${dump_dir:=/var/crash}
-	if ! [ -d "$dump_dir" ]; then
-		mkdir -p "$dump_dir"
-		chmod 700 "$dump_dir"
+	local dump_dir=${dump_dir:-/var/crash}
+	if ! [ -d "${dump_dir}" ]; then
+		mkdir -p "${dump_dir}"
+		chmod 700 "${dump_dir}"
 	fi
 
-	if [ "$RC_UNAME" = FreeBSD ]; then
+	if [ "${RC_UNAME}" = "FreeBSD" ]; then
 		# Don't quote ${dump_device}, so that if it's unset,
 		# savecore will check on the partitions listed in fstab
 		# without errors in the output
-		savecore -C "$dump_dir" $dump_device >/dev/null
+		savecore -C "${dump_dir}" ${dump_device} >/dev/null
 	else
-		ls "$dump_dir"/bsd* > /dev/null 2>&1
+		ls "${dump_dir}"/bsd* > /dev/null 2>&1
 	fi
 	[ $? = 0 ] || return 0
 
-	local sopts="$dump_dir $dump_device"
-	yesno $dump_compress && sopts="-z $sopts"
-	ebegin "Saving kernel core dump in $dump_dir"
-	savecore $sopts >/dev/null
+	local sopts="${dump_dir} ${dump_device}"
+	yesno ${dump_compress} && sopts="-z ${sopts}"
+	ebegin "Saving kernel core dump in ${dump_dir}"
+	savecore ${sopts} >/dev/null
 	eend $?
 }

init.d/staticroute.in

@@ -1,104 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-# This script was inspired by the equivalent rc.d staticroute from NetBSD.
-
-description="Configures static routes."
-__nl="
-"
-
-depend()
-{
-	provide net
-	use network
-	keyword -jail -prefix -vserver
-}
-
-pre_flight_checks()
-{
-	route=route
-	[ -s /etc/route.conf ] && return 0
-
-	if [ -n "$staticiproute" ]; then
-		route="ip route"
-		staticroute="$staticiproute"
-	fi
-}
-
-dump_args()
-{
-	# Route configuration file, as used by the NetBSD RC system
-	if [ -s /etc/route.conf ]; then
-		cat /etc/route.conf
-		return $?
-	fi
-
-	case "$staticroute" in
-	*"$__nl"*)
-		echo "$staticroute"
-		;;
-	*)
-		(
-			set -o noglob
-			IFS=';'; set -- $staticroute
-			IFS="$__nl"; echo "$*"
-		)
-		;;
-	esac
-}
-
-do_routes()
-{
-	local xtra= family=
-	[ "$RC_UNAME" != Linux ] && xtra=-q
-
-	ebegin "$1 static routes"
-	eindent
-	pre_flight_checks
-	dump_args | while read args; do
-		[ -z "$args" ] && continue
-		case "$args" in
-		"#"*)
-			;;
-		"+"*)
-			[ $2 = "add" ] && eval ${args#*+}
-			;;
-		"-"*)
-			[ $2 = "del" -o $2 = "delete" ] && eval ${args#*-}
-			;;
-		*)
-			veinfo "$args"
-			case "$route" in
-			"ip route")
-				ip route $2 $args
-				;;
-			*)
-				# Linux route does cannot work it out ...
-				if [ "$RC_UNAME" = Linux ]; then
-					case "$args" in
-					*:*) family="-A inet6";;
-					*) family=;;
-					esac
-				fi
-				route $famly $xtra $2 -$args
-				;;
-			esac
-			veend $?
-		esac
-	done
-	eoutdent
-	eend 0
-}
-
-start()
-{
-	do_routes "Adding" "add"
-}
-
-stop()
-{
-	local cmd="delete"
-	[ "$RC_UNAME" = Linux ] && cmd="del"
-	do_routes "Deleting" "$cmd"
-}

init.d/swap-blk.in

@@ -1,11 +1,11 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {
 	before fsck
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start()

init.d/swap.in

@@ -1,17 +1,17 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {
 	need localmount
-	keyword -jail -openvz -prefix -vserver -lxc
+	keyword nojail noopenvz noprefix novserver
 }
 
 start()
 {
 	ebegin "Activating swap devices"
-	case "$RC_UNAME" in
+	case "${RC_UNAME}" in
 		NetBSD|OpenBSD) swapctl -A -t noblk >/dev/null;;
 		*)		swapon -a >/dev/null;;
 	esac
@@ -21,13 +21,7 @@ start()
 stop()
 {
 	ebegin "Deactivating swap devices"
-
-	# Try to unmount all tmpfs filesystems not in use, else a deadlock may
-	# occure. As $RC_SVCDIR may also be tmpfs we cd to it to lock it
-	cd "$RC_SVCDIR"
-	umount -a -t tmpfs 2>/dev/null
-
-	case "$RC_UNAME" in
+	case "${RC_UNAME}" in
 		NetBSD|OpenBSD)	swapctl -U -t noblk >/dev/null;;
 		*)		swapoff -a >/dev/null;;
 	esac

init.d/swclock.in

@@ -1,28 +0,0 @@
-#!@PREFIX@/sbin/runscript
-# Copyright (c) 2009 Roy Marples <roy@marples.name>
-# All rights reserved. Released under the 2-clause BSD license.
-
-description="Sets the local clock to the mtime of a given file."
-
-depend()
-{
-	before *
-	provide clock
-	keyword -openvz -prefix -uml -vserver -xenu -lxc
-}
-
-# swclock is an OpenRC built in
-
-start()
-{
-	ebegin "Setting the local clock based on last shutdown time"
-	swclock --warn
-	eend $?
-}
-
-stop()
-{
-	ebegin "Saving the shutdown time"
-	swclock --save
-	eend $?
-}

init.d/syscons.in

@@ -1,36 +1,36 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend() {
 	need localmount
-	keyword -jail -prefix
+	keyword nojail noprefix
 }
 
 start() {
-	if [ -n "$allscreen_flags" ]; then
-		ebegin "Setting mode to $allscreen_flags for all screens"
+	if [ -n "${allscreen_flags}" ]; then
+		ebegin "Setting mode to ${allscreen_flags} for all screens"
 		for v in /dev/ttyv*; do
-			vidcontrol $allscreen_flags <$v
+			vidcontrol ${allscreen_flags} <"${v}"
 		done
 		eend $?
 	fi
 	
-	if [ -n "$keymap" ]; then
-		ebegin "Setting keymap to $keymap"
-		kbdcontrol -l $keymap </dev/console
+	if [ -n "${keymap}" ]; then
+		ebegin "Setting keymap to ${keymap}"
+		kbdcontrol -l ${keymap} </dev/console
 		eend $?
 	fi
 	
-	if [ -n "$keyrate" ]; then
-		ebegin "Setting keyrate to $keyrate"
-		kbdcontrol -r $keyrate </dev/console
+	if [ -n "${keyrate}" ]; then
+		ebegin "Setting keyrate to ${keyrate}"
+		kbdcontrol -r ${keyrate} </dev/console
 		eend $?
 	fi
 
-	if [ -n "$keychange" ]; then
+	if [ -n "${keychange}" ]; then
 		ebegin "Changing function keys"
-		eval set -- "$keychange"
+		eval set -- "${keychange}"
 		eindent
 		while [ $# -gt 0 ]; do
 			veinfo "F$1 -> \`$2'"
@@ -41,40 +41,40 @@ start() {
 		eoutdent
 	fi
 	
-	if [ -n "$cursor" ]; then
+	if [ -n "${cursor}" ]; then
 		ebegin "Setting cursor"
-		vidcontrol -c $cursor
+		vidcontrol -c ${cursor}
 		eend $?
 	fi
 
 	local v= f=
 	for v in font8x16 font8x14 font8x8; do
-		eval f=\$$v
-		if [ -n "$f" ]; then
-			ebegin "Setting font $f"
-			vidcontrol -f ${v##font} $f
+		eval f=\$${v}
+		if [ -n "${f}" ]; then
+			ebegin "Setting font ${f}"
+			vidcontrol -f ${v##font} ${f}
 			eend $?
 		fi
 	done
 
-	if [ -n "$blanktime" ]; then
+	if [ -n "${blanktime}" ]; then
 		ebegin "Setting blanktime"
-		vidcontrol -t $blanktime
+		vidcontrol -t ${blanktime}
 		eend $?
 	fi
 
-	if [ -n "$saver" ]; then
+	if [ -n "${saver}" ]; then
 		local i=
 		for i in $(kldstat | sed -n -e 's/.* \(splash_.*\)/\1/p'); do
-			kldunload "$i"
+			kldunload "${i}"
 		done
 		kldstat -v | grep -q _saver || kldload ${saver}_saver
 	fi
 
-	if [ -n "$kbdflags" ]; then
+	if [ -n "${kbdflags}" ]; then
 		ebegin "Setting keyboard flags for all screens"
 		for v in /dev/ttyv*; do
-			kbdcontrol $kbdflags <$v
+			kbdcontrol ${kbdflags} <${v}
 		done
 		eend $?
 	fi

init.d/sysctl.BSD.in

@@ -1,31 +1,24 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {
+	use hostname
 	before bootmisc logger
-	keyword -prefix
+	keyword noprefix
 }
 
 start()
 {
 	[ -e /etc/sysctl.conf ] || return 0
-	local retval=0 var= comments= conf=
+	local retval=0 var= comments=
 	ebegin "Configuring kernel parameters"
-	eindent
-	for conf in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
-		if [ -r "$conf" ]; then
-			vebegin "applying $conf"
-			while read var comments; do
-				case "$var" in
-				""|"#"*) continue;;
-				esac
-				sysctl -w "$var" >/dev/null || retval=1
-			done < "$conf"
-			veend $retval
-		fi
-	done
-	eoutdent
-	eend $retval "Some errors were encountered"
+	while read var comments; do
+		case "${var}" in
+			""|"#"*) continue;;
+		esac
+		sysctl -w "${var}" >/dev/null || retval=1
+	done < /etc/sysctl.conf
+	eend ${retval} "Some errors were encountered"
 }

init.d/sysctl.Linux.in

@@ -1,25 +1,18 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2008 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {
+	use hostname
 	before bootmisc logger
-	keyword -openvz -prefix -vserver
+	keyword noopenvz noprefix novserver
 }
 
 start()
 {
-	local conf= retval=0
+	[ -e /etc/sysctl.conf ] || return 0
 	ebegin "Configuring kernel parameters"
-	eindent
-	for conf in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
-		if [ -r "$conf" ]; then
-			vebegin "applying $conf"
-			sysctl -p "$conf" >/dev/null
-			veend $? || retval=1
-		fi
-	done
-	eoutdent
-	eend $retval "Some errors were encountered"
+	sysctl -p >/dev/null
+	eend $? "Some errors were encountered"
 }

init.d/sysfs.in

@@ -1,12 +1,12 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Mount the sys filesystem."
 
 depend()
 {
-	keyword -prefix -vserver
+	keyword noprefix
 }
 
 mount_sys()
@@ -31,8 +31,7 @@ mount_sys()
 mount_misc()
 {
 	# Setup Kernel Support for securityfs
-	if [ -d /sys/kernel/security ] && \
-		! mountinfo -q /sys/kernel/security; then
+	if [ -d /sys/kernel/security ] && ! mountinfo -q /sys/kernel/security; then
 		if grep -qs securityfs /proc/filesystems; then
 			ebegin "Mounting security filesystem"
 			mount -n -t securityfs -o nodev,noexec,nosuid \
@@ -57,8 +56,8 @@ start()
 	local retval
 	mount_sys
 	retval=$?
-	if [ $retval -eq 0 ]; then
+	if [ ${retval} -eq 0 ]; then
 		mount_misc
 	fi
-	return $retval
+	return ${retval}
 }

init.d/syslogd.in

@@ -1,10 +1,10 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 command=/usr/sbin/syslogd
-command_args=$syslogd_args
-case "$RC_UNAME" in
+command_args=${syslogd_args}
+case "${RC_UNAME}" in
 	FreeBSD|DragonFly)	pidfile=/var/run/syslog.pid;;
 	*)			pidfile=/var/run/syslogd.pid;;
 esac
@@ -16,5 +16,5 @@ depend()
 	use net newsyslog
 	need localmount
 	after bootmisc
-	keyword -prefix
+	keyword noprefix
 }

init.d/termencoding.in

@@ -1,15 +1,15 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2008-2009 Roy Marples <roy@marples.name>
+# Copyright 2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 description="Configures terminal encoding."
 
 ttyn=${rc_tty_number:-${RC_TTY_NUMBER:-12}}
-: ${unicode:=${UNICODE}}
+unicode=${unicode:-${UNICODE}}
 
 depend()
 {
-	keyword -openvz -prefix -uml -vserver -xenu
+	keyword noopenvz noprefix nouml novserver noxenu
 }
 
 start()
@@ -25,11 +25,11 @@ start()
 		termmsg="UTF-8"
 	fi
 
-	ebegin "Setting terminal encoding [$termmsg]"
+	ebegin "Setting terminal encoding [${termmsg}]"
 	n=1
-	while [ ${n} -le "$ttyn" ]; do
-		printf "\033%s" "$termencoding" >$ttydev$n
-		n=$(($n + 1))
+	while [ ${n} -le "${ttyn}" ]; do
+		printf "\033%s" "${termencoding}" >"${ttydev}${n}"
+		n=$((${n} + 1))
 	done
 	eend 0
 }

init.d/ttys.in

@@ -1,11 +1,11 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2008 Roy Marples <roy@marples.name>
+# Copyright 2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend() 
 {
 	after fsck
-	keyword -prefix
+	keyword noprefix
 }
 
 start()

init.d/urandom.in

@@ -1,14 +1,15 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
+# Copyright 2007-2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
-: ${urandom_seed:=${URANDOM_SEED:-/var/run/random-seed}}
+urandom_seed=${urandom_seed:-${URANDOM_SEED:-/var/run/random-seed}}
+
 description="Initializes the random number generator."
 
 depend()
 {
 	need localmount
-	keyword -jail -openvz -prefix
+	keyword nojail noprefix
 }
 
 save_seed()
@@ -21,19 +22,19 @@ save_seed()
 
 	(	# sub shell to prevent umask pollution
 		umask 077
-		dd if=/dev/urandom of="$urandom_seed" count=${psz} 2>/dev/null
+		dd if=/dev/urandom of="${urandom_seed}" count=${psz} 2>/dev/null
 	)
 }
 
 start()
 {
 	[ -c /dev/urandom ] || return
-	if [ -f "$urandom_seed" ]; then
+	if [ -f "${urandom_seed}" ]; then
 		ebegin "Initializing random number generator"
-		cat "$urandom_seed" > /dev/urandom
+		cat "${urandom_seed}" > /dev/urandom
 		eend $? "Error initializing random number generator"
 	fi
-	rm -f "$urandom_seed" && save_seed
+	rm -f "${urandom_seed}" && save_seed
 	return 0
 }
 

init.d/wscons.in

@@ -1,11 +1,11 @@
 #!@PREFIX@/sbin/runscript
-# Copyright (c) 2008-2009 Roy Marples <roy@marples.name>
+# Copyright 2008 Roy Marples <roy@marples.name>
 # All rights reserved. Released under the 2-clause BSD license.
 
 depend()
 {
 	need localmount
-	keyword -prefix
+	keyword noprefix
 }
 
 start()
@@ -19,82 +19,82 @@ start()
 	#	screen idx scr emul
 	#	font   name width height enc file
 	while read type arg1 arg2 arg3 arg4 arg5; do
-		case "$type" in
+		case "${type}" in
 			\#*|"")
 				continue
 				;;
 
 			font)
-				cmd=$wsfld
-				[ "$arg2" != "-" ] && cmd="$cmd -w $arg2"
-				[ "$arg3" != "-" ] && cmd="$cmd -h $arg3" 
-				[ "$arg4" != "-" ] && cmd="$cmd -e $arg4"
-				cmd="$cmd -N $arg1 $arg5"
-				eval "$cmd"				
+				cmd=${wsfld}
+				[ "${arg2}" != "-" ] && cmd="${cmd} -w ${arg2}"
+				[ "${arg3}" != "-" ] && cmd="${cmd} -h ${arg3}" 
+				[ "${arg4}" != "-" ] && cmd="${cmd} -e ${arg4}"
+				cmd="${cmd} -N ${arg1} ${arg5}"
+				eval "${cmd}"				
 				;;
 
 			screen)
-				cmd=$wscfg
-				[ "$arg2" != "-" ] && cmd="$cmd -t $arg2"
-				[ "$arg3" != "-" ] && cmd="$cmd -e $arg3"
-				cmd="$cmd $arg1"
-				eval "$cmd"
+				cmd=${wscfg}
+				[ "${arg2}" != "-" ] && cmd="${cmd} -t ${arg2}"
+				[ "${arg3}" != "-" ] && cmd="${cmd} -e ${arg3}"
+				cmd="${cmd} ${arg1}"
+				eval "${cmd}"
 				;;
 
 			keyboard)
-				cmd=$wscfg
-				case "$arg1" in
+				cmd=${wscfg}
+				case "${arg1}" in
 					-|auto)
-						cmd="$cmd -k"
+						cmd="${cmd} -k"
 						;;
 					*)
-						cmd="$cmd -k $arg1"
+						cmd="${cmd} -k ${arg1}"
 						;;
 				esac
-				$cmd
+				${cmd}
 				;;
 
 			encoding)
-				eval $wsctl -w "\"encoding=$arg1\""
+				eval ${wsctl} -w "\"encoding=${arg1}\""
 				;;
 
 			mapfile)
 				local entry=
 				while read entry; do
-					case "$entry" in
+					case "${entry}" in
 					\#*|"")
 						continue
 						;;
 					*)
-						cmd="$wsctl -w \"map+=$entry\""
-						eval "$cmd >/dev/null"
+						cmd="${wsctl} -w \"map+=${entry}\""
+						eval "${cmd} >/dev/null"
 						;;
 					esac
-				done < "$arg1"
+				done < "${arg1}"
 				;;
 
 			mux)
-				eval "$wscfg -m $arg1"
+				eval "${wscfg} -m ${arg1}"
 				;;
 
 			setvar)
-				case "$arg1" in
+				case "${arg1}" in
 				keyboard)
-					cmd="$wsctl -kw $arg2"
+					cmd="${wsctl} -kw ${arg2}"
 					;;
 				display)
-					cmd="$wsctl -dw $arg2"
+					cmd="${wsctl} -dw ${arg2}"
 					;;
 				mouse)
-					cmd="$wsctl -mw $arg2"
+					cmd="${wsctl} -mw ${arg2}"
 					;;
 				*)
-					cmd="$wsctl -w $arg1"
+					cmd="${wsctl} -w ${arg1}"
 					;;
 				esac
-				eval "$cmd"
+				eval "${cmd}"
 				;;
 
 		esac
-	done < "$config"
+	done < "${config}"
 }

man/Makefile

@@ -18,7 +18,7 @@ MAKE_LINKS=	suffix=$${man\#*.}; \
 
 MK=		../mk
 include ${MK}/sys.mk
-include ${MK}/gitignore.mk
+include ${MK}/svnignore.mk
 
 all:
 

man/einfo.3

@@ -1,4 +1,4 @@
-.\" Copyright (c) 2007-2008 Roy Marples
+.\" Copyright 2007-2008 Roy Marples
 .\" All rights reserved
 .\"
 .\" Redistribution and use in source and binary forms, with or without
@@ -39,7 +39,7 @@
 .Nm eprefix
 .Nd colorful informational output
 .Sh LIBRARY
-Enhanced Information output library (libeinfo, -leinfo)
+Enhanced Informatation output library (libeinfo, -leinfo)
 .Sh SYNOPSIS
 .In einfo.h
 .Ft int Fn einfo "const char * restrict format" ...

man/rc-service.8

@@ -1,4 +1,4 @@
-.\" Copyright (c) 2008-2009 Roy Marples
+.\" Copyright 2008 Roy Marples
 .\" All rights reserved
 .\"
 .\" Redistribution and use in source and binary forms, with or without
@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd May 1, 2009
+.Dd Mar 26, 2008
 .Dt RC-SERVICE 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -30,26 +30,20 @@
 .Nd locate and run an OpenRC service with the given arguments 
 .Sh SYNOPSIS
 .Nm
-.Op Fl i , -ifexists
 .Ar service cmd
 .Op Ar ...
 .Nm
+.Fl l , -list
+.Nm
 .Fl e , -exists
 .Ar service
 .Nm
-.Fl l , -list
-.Nm
 .Fl r , -resolve
 .Ar service
 .Sh DESCRIPTION
 Service scripts could be in different places on different systems. 
 .Nm
 locates the specified service and runs it with the given arguments.
-If
-.Fl i , -ifexists
-is given then
-.Nm
-returns 0 even if the service does not exist.
 .Pp
 If given the
 .Fl l , -list
@@ -57,14 +51,14 @@ argument then
 .Nm
 will list all available services.
 .Pp
-.Fl e , -exists
+.Fl -e , exists
 return 0 if it can find
 .Ar service ,
 otherwise -1.
-.Fl r , -resolve
+.Fl -r , resolve
 does the same and also prints the full path of the service to stdout.
 .Sh SEE ALSO
 .Xr rc 8 ,
 .Xr stdout 3
 .Sh AUTHORS
-.An Roy Marples <roy@marples.name>
+.An Roy Marples" <roy@marples.name>

man/rc-status.8

@@ -1,4 +1,4 @@
-.\" Copyright (c) 2007-2009 Roy Marples
+.\" Copyright 2007-2008 Roy Marples
 .\" All rights reserved
 .\"
 .\" Redistribution and use in source and binary forms, with or without
@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd April 24, 2008
+.Dd Arp 9, 2008
 .Dt RC-STATUS 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -30,21 +30,19 @@
 .Nd show status info about runlevels
 .Sh SYNOPSIS
 .Nm
-.Op Fl aclsuC
+.Op Fl alsuC
 .Op Ar runlevel
 .Sh DESCRIPTION
 .Nm
 gathers and displays information about the status of services 
 in different runlevels.  The default behavior is to show information 
-about the current runlevel and any unassigned services that are not stopped,
+about the current runlevel and any unassgined services that are not stopped,
 but any runlevel can be quickly examined.
 .Pp
 The options are as follows:
 .Bl -tag -width ".Fl test , test string"
 .It Fl a , -all
 Show all runlevels and their services.
-.It Fl c , -crashed
-List all services that have crashed.
 .It Fl l , -list
 List all defined runlevels.
 .It fl r , -runlevel
@@ -59,11 +57,8 @@ Disable color output.
 Show information only for the named
 .Ar runlevel .
 .El
-.Sh EXIT STATUS
-.Nm
-exits 0, except when checking for crashed services and it doesn't find any.
 .Sh SEE ALSO
 .Xr rc 8 ,
 .Xr rc-update 8
 .Sh AUTHORS
-.An Roy Marples <roy@marples.name>
+.An Roy Marples" <roy@marples.name>

man/rc-update.8

@@ -1,4 +1,4 @@
-.\" Copyright (c) 2007-2009 Roy Marples
+.\" Copyright 2007-2008 Roy Marples
 .\" All rights reserved
 .\"
 .\" Redistribution and use in source and binary forms, with or without
@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd May 2, 2009
+.Dd Jan 15, 2008
 .Dt RC-UPDATE 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -30,17 +30,14 @@
 .Nd add and remove services to and from a runlevel 
 .Sh SYNOPSIS
 .Nm
-.Op Fl s , -stack
 .Ar add
 .Ar service
 .Op Ar runlevel ...
 .Nm
-.Op Fl s , -stack
 .Ar delete
 .Ar service
 .Op Ar runlevel ...
 .Nm
-.Op Fl u , -update
 .Op Fl v , -verbose
 .Ar show
 .Op Ar runlevel ...
@@ -53,11 +50,10 @@ All services must reside in the
 .Pa /etc/init.d
 or
 .Pa /usr/local/etc/init.d
-directories.
-They must also conform to the OpenRC runscript standard.
+directories. They must also conform to the OpenRC runscript standard.
 .Pp
 .Bl -tag -width "Fl a , -delete service"
-.It Ar add Ar service
+.It Fl a , -add Ar service
 Add the
 .Ar service
 to the
@@ -76,18 +72,9 @@ Show all enabled services and the runlevels they belong to.  If you specify
 runlevels to show, then only those will be included in the output.
 .It Fl v , -verbose
 Show all services.
-.It Fl u , -update
-Forces an update of the dependency tree cache.
-This may be needed in the event of clock skew (a file in /etc is newer than the
-system clock).
 .El
-.Pp
-If the
-.Fl s , -stack
-option is given then we either add or remove the runlevel from the runlevel.
-This allows inheritance of runlevels.
 .Sh SEE ALSO
 .Xr rc 8 ,
 .Xr rc-status 8
 .Sh AUTHORS
-.An Roy Marples <roy@marples.name>
+.An Roy Marples" <roy@marples.name>

man/rc.8

@@ -1,4 +1,4 @@
-.\" Copyright (c) 2007-2009 Roy Marples
+.\" Copyright 2007-2008 Roy Marples
 .\" All rights reserved
 .\"
 .\" Redistribution and use in source and binary forms, with or without
@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.Dd May 2, 2009
+.Dd November 03, 2008
 .Dt RC 8 SMM
 .Os OpenRC
 .Sh NAME
@@ -35,11 +35,10 @@
 .Sh DESCRIPTION
 .Nm
 first stops any services that are not for the runlevel and then starts any
-services in the runlevel and from stacked runlevels added by
+services added by
 .Nm rc-update
-that are not currently started.
-If no runlevel is specified then we use the current runlevel the system
-is currently in.
+that are not currently started. If no runlevel is specified then we use the
+current runlevel the system is currently in.
 .Pp
 There are some special runlevels that you should be aware of:
 .Bl -tag -width "shutdown"
@@ -66,10 +65,8 @@ All services in the boot and sysinit runlevels are automatically included
 in all other runlevels except for those listed here.
 .It Ar single
 Stops all services except for those in the sysinit runlevel.
-.It Ar reboot
-Changes to the shutdown runlevel and then reboots the host.
 .It Ar shutdown
-Changes to the shutdown runlevel and then halts the host.
+Changes to the single runlevel and then halts the host.
 .El
 .Pp
 You should not call any of these runlevels yourself.
@@ -84,4 +81,4 @@ and let them call these special runlevels.
 .Xr init 8 ,
 .Xr shutdown 8
 .Sh AUTHORS
-.An Roy Marples Aq roy@marples.name
+.An Roy Marples <roy@marples.name>

man/rc_config.3

@@ -1,4 +1,4 @@
-.\" Copyright (c) 2007-2008 Roy Marples
+.\" Copyright 2007-2008 Roy Marples
 .\" All rights reserved
 .\"
 .\" Redistribution and use in source and binary forms, with or without
@@ -70,4 +70,4 @@ is set to
 .Xr rc_stringlist_free 3 ,
 .Xr sh 1
 .Sh AUTHORS
-.An Roy Marples <roy@marples.name>
+.An Roy Marples" <roy@marples.name>